DPGT11T304-MM4 WSM01 Wendeplatten - Walter Tools
Robust coated‑carbide grade and secure chip control combine for dependable machining of stainless steels and heat‑resistant superalloys; the Rhombic 55° form with r0.4 and 11° relief supports stable cutting and consistent surface finish. Order directly via Metav Werkzeuge or request application advice from our consultants. DPGT11T304-MM4 WSM01 — Indexable turning insert, 11° relief, r0.4 (Walter Tools) A versatile DPGT11T304-MM4 WSM01 indexable turning insert designed for heavy duty machining of stainless steel and heat‑resistant superalloys. Tiger‑tec Silver series for extended tool life WSM01 coated carbide for stainless and superalloys MM4 chipbreaker for secure chip control Rhombic 55° shape with r0.4 corner radius Lower machining costs through predictable wear behaviour The Tiger‑tec Silver coating combined with the WSM01 grade delivers improved wear resistance and repeatable performance when cutting tough materials. A coated carbide substrate reduces flank wear and delays built‑up edge formation, which means machining parameters can be kept consistent over longer tool life. For production environments this results in fewer indexings and lower overall tooling consumption while maintaining process reliability. Geometry that balances strength and finish The Rhombic 55° form with r0.4 corner radius and 11° relief produces a robust cutting edge that tolerates intermittent cuts and hard regions in the workpiece. The corner radius supports improved surface integrity at moderate feeds, whereas the relief angle ensures the insert clears the workpiece without rubbing. This geometry gives a practical compromise between edge strength and the ability to achieve a consistent surface finish in demanding materials. Secure chip control for uninterrupted processes The MM4 chipbreaker is engineered to form manageable chips when machining ductile and work‑hardening materials, helping to avoid tangled swarf and machine stoppages. Combined with the insert’s T3 thickness for increased rigidity, the result is enhanced process stability and reduced risk of tool failure under elevated cutting forces. Stable chip formation contributes directly to predictable cycle times and reduced secondary handling. Proven suitability and application guidance Classification under ISO 513 indicates suitability for the material groups M (stainless steels) and S (heat‑resistant superalloys and titanium): these codes denote the workpiece groups the insert is intended to machine, not the insert material itself. In practice, this makes the insert a sound choice for job shops and production lines machining corrosion‑resistant components and high‑temperature alloys, where consistent edge life and repeatable finish are priorities. The DPGT11T304-MM4 WSM01 insert offers a productive balance of life, control and surface quality backed by Walter Tools engineering. For workshop‑specific recommendations on cutting data and availability of Walter Tools inserts, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DPGT11T304-MM4-WSM01-WALTER Designation: DPGT11T304-MM4 WSM01 Type: Indexable turning insert Brand: Walter Tools Facts Relief angle: 11° Corner radius: r0.4 mm Insert size: 11 Thickness: T3 Shape: Rhombic 55° Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Suitable for: stainless steel (M), heat‑resistant superalloys and titanium (S) Intended use: turning applications with demanding materials FAQ What materials is this insert suitable for? The insert is specified for machining stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S); the WSM01 grade and Tiger‑tec Silver series are optimised for these workpiece groups. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker promotes controlled chip formation in ductile, work‑hardening materials, reducing the risk of tangled swarf and improving overall process stability during turning operations. What does the r0.4 corner radius mean for surface finish? A corner radius of r0.4 mm provides a compromise between edge strength and finish quality, enabling smoother surfaces at moderate feeds while resisting edge chipping in interrupted cuts. Is the insert supplied as a coated carbide? Yes, the WSM01 designation denotes a coated carbide grade from the Tiger‑tec Silver series, developed for extended tool life on demanding materials. Which insert designation and SKU should be referenced when ordering? Reference DPGT11T304-MM4 WSM01 or SKU DPGT11T304-MM4-WSM01-WALTER when enquiring or placing an order for this Walter Tools indexable turning insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used for explanation only and do not imply any affiliation with or endorsement by the respective rights holders. The offered article is original, factory‑new merchandise supplied by the manufacturer Walter Tools.
DPGT11T304-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for stable cutting edges and reliable chip formation when machining stainless steel and heat-resistant alloys; secure supply and application advice via Metav Werkzeuge. DPGT11T304-MM4 WSM20S — Turning indexable insert for stainless steel and superalloys (Tiger·tec Silver) by Walter Tools DPGT11T304-MM4 WSM20S is an indexable turning insert designed for heavy-duty and heat-prone materials, supplying edge stability and consistent performance in precision turning applications Tiger·tec Silver coating for edge stability WSM20S grade for stainless steel and superalloys Rhombic 55° form with 11° relief MM4 chipbreaker for reliable chip control Consistent cutting performance for demanding alloys The DPGT11T304-MM4 WSM20S insert combines a specialised grade and coating to deliver repeatable results when machining challenging materials. The WSM20S is a coated carbide grade within Walter Tools’ Tiger·tec Silver family, engineered to resist thermal and mechanical wear. This makes the insert particularly suited for stainless steel and for heat-resistant superalloys and Titan, where high temperatures and sticky chips can shorten tool life. By improving edge stability and promoting predictable wear, the design helps maintain component tolerances and reduces unscheduled tool changes, supporting steady production throughput. Geometry that balances strength and surface quality The insert’s rhombic 55° form and 11° relief angle are selected to offer a reliable combination of cutting access and resistance to cutting forces. The relief angle reduces rubbing behind the cutting edge, while the 0.4 mm corner radius increases edge robustness without compromising the achievable surface finish. In practice, this geometry translates into fewer vibration-induced marks and better repeatability in turned parts. For those less familiar, the corner radius is the rounded tip of the cutting edge: a larger radius spreads forces, improving life; a smaller radius favours finer finishes—this insert strikes a practical balance for many industrial turning tasks. Controlled chips and process security to raise productivity Chip management is central to efficient turning of stainless steel and superalloys; the MM4 chipbreaker on this insert is tailored for secure chip formation and evacuation, reducing the risk of entangling or long, stringy chips. Combined with a T3 plate thickness that increases rigidity, the system reduces deflection under load and supports consistent cutting parameters. The result is improved chip control, longer tool life and fewer interruptions for chip clearing or premature regrinds. Backed by Walter Tools’ emphasis on process stability, the insert helps to sustain higher utilisation rates on lathes and turning centres. Contact Metav Werkzeuge for tailored machining recommendations and to arrange supply of Walter Tools’ DPGT11T304-MM4 WSM20S inserts for specific stainless steel or superalloy applications Technical data SKU: DPGT11T304-MM4-WSM20S-WALTER Article designation: DPGT11T304-MM4 WSM20S Product type: Turning indexable insert Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Insert form: Rhombic 55° Insert size: 11 Plate thickness: T3 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Material suitability: S / M Designation without grade: DPGT11T304-MM4 ISO designation: DPGT11T304-MM4 WSM20S FAQ Which materials is the DPGT11T304-MM4 WSM20S most suitable for? The DPGT11T304-MM4 WSM20S insert is designed for stainless steel (ISO group M) and for heat-resistant superalloys and Titan (ISO group S), reflecting the WSM20S grade’s focus on thermal resistance and edge stability. What benefits does the Tiger·tec Silver coating offer? Tiger·tec Silver on the WSM20S grade reduces heat impact and improves wear resistance, allowing the insert to maintain a stable cutting edge and predictable performance during extended turning operations. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius provides a balance between strength and finish: it increases edge durability under load while still enabling a good surface quality on turned components when using the DPGT11T304-MM4 WSM20S. For which machining conditions is the MM4 chipbreaker recommended? The MM4 chipbreaker on this insert promotes controlled chip formation and evacuation in continuous and interrupted cuts, particularly when machining sticky or heat-prone materials like stainless steel and superalloys. What does the rhombic 55° form mean for accessibility and cutting forces? The rhombic 55° geometry gives improved tool access in turning profiles while keeping cutting forces at a manageable level; combined with the 11° relief, it supports dimensional stability and repeatable part quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product from the specified manufacturer.
DPGT11T304-MP4 WPP20G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold coating and an MP4 chipbreaker for reliable, long‑life performance in steel turning; the robust rhombic 55° geometry with an 11° clearance and 0.4 mm nose radius delivers consistent surface quality and predictable tool life. Order the insert via Metav Werkzeuge or contact their consultants for application advice. DPGT11T304-MP4 WPP20G turning insert, Tiger·tec Gold, MP4 chipbreaker — Walter Tools The DPGT11T304-MP4 WPP20G is a rhombic 55° turning insert designed for machining steel, combining a high‑performance Tiger·tec Gold grade with an MP4 chipbreaker for stable chip control and extended tool life. Tiger·tec Gold coating for extended tool life MP4 chipbreaker for consistent chip control Rhombic 55° geometry for versatile turning 11° clearance and 0.4 mm nose radius Greater process reliability through optimised grade and coating The Tiger·tec Gold grade WPP20G is engineered for machining steel, offering a balanced combination of wear resistance and toughness that suits a wide range of turning tasks. Thanks to the coated cemented carbide substrate, this grade reduces flank wear and extends service intervals, which improves machine uptime and lowers overall cost per component. The insert’s schema supports predictable performance in interrupted cuts and continuous turning alike, contributing to a more efficient production flow and consistent part quality. Consistent chip control and improved surface finish The MP4 chipbreaker is tuned for reliable chip formation during medium to finishing operations, minimising tool engagement issues and enabling safer unattended cycles. Combined with the rhombic 55° geometry and 11° clearance, the insert produces stable cutting forces and a reduced cutting edge load. The 0.4 mm nose radius supports good surface integrity without sacrificing dimensional control, making the insert particularly suitable where a balance between finish and tool life is required. Easy integration and economic machining With a compact 11 size and T3 thickness, the insert integrates readily into common toolholder systems for general turning applications. The standard designation and tolerance class ensure compatibility and repeatability in production setups, while the combination of grade and chipbreaker aims to lower per‑part costs through extended life and fewer tool changes. For facilities prioritising reliable, repeatable results on steel, this insert offers a practical route to improved productivity and process stability. Choose the Walter Tools Tiger·tec Gold DPGT11T304-MP4 WPP20G for demanding steel turning projects and contact Metav Werkzeuge for tailored technical advice and procurement support. Technical Data SKU: DPGT11T304-MP4-WPP20G-WALTER Product name: DPGT11T304-MP4 WPP20G Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Specifications Insert size: 11 Relief angle: 11° Nose radius: 0.4 mm Thickness: T3 Shape: Rhombus 55° Features Chipbreaker: MP4 Coating/sort: WPP20G (Tiger·tec Gold) Material designation: P (steel) Tolerance class: G Designation without grade: DPGT11T304-MP4 FAQ What materials is this insert suitable for? The DPGT11T304-MP4 WPP20G is specified for steel applications (material designation P) and the Tiger·tec Gold grade is optimised for the heat and chip formation typical of steel machining. Which chipbreaker is fitted and what does it deliver? This insert features the MP4 chipbreaker, which provides reliable chip control in medium to finishing cuts and supports safer, more consistent turning cycles. How does the geometry affect application scope? The rhombic 55° shape and 11° relief angle allow versatile turning operations; the layout supports both general turning and finishing tasks while the 0.4 mm nose radius helps achieve a good surface finish. Is the insert compatible with standard toolholders? The DPGT11T304-MP4 WPP20G follows common designation standards and the T3 thickness and 11 size make it compatible with typical toolholder systems for indexable turning. What advantages does Tiger·tec Gold provide in practice? Tiger·tec Gold improves wear resistance and cutting edge stability, which translates into longer tool life and more predictable performance during steel turning operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
DPGT11T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Taking advantage of the Tiger-tec Silver series and the WSM01 coated carbide grade, this insert delivers stable edge performance and secure chip formation for stainless steel and heat-resistant alloys; order the DPGT11T308-MM4 WSM01 directly via Metav Werkzeuge or ask our consultants if needed DPGT11T308-MM4 WSM01 turning indexable insert — rhombic 55°, 11° clearance — Walter Tools DPGT11T308-MM4 WSM01 is a coated carbide turning insert designed for demanding applications in stainless steel and high-temperature alloys Tiger-tec Silver coating for extended tool life WSM01 grade optimised for difficult-to-cut alloys MM4 chipbreaker for consistent chip control Rhombic 55° geometry with 0.8 mm corner radius High-performance cutting of demanding materials The combination of the Tiger-tec Silver surface treatment and the WSM01 coated carbide substrate yields a machining solution tailored for stainless steel and heat-resistant superalloys. The microstructure of the coating improves thermal resistance and reduces flank wear, which translates into longer productive tool life and fewer tool changes. By choosing an insert with a robust geometry and a 0.8 mm corner radius, process stability is increased during heavy cuts and intermittent cuts, reducing the risk of edge chipping and unplanned stoppages. Consistent chip control and secure edge integrity A dedicated MM4 chipbreaker provides predictable chip formation and evacuation, essential when machining materials that tend to form long, stringy chips. The chipbreaker geometry helps maintain a uniform cutting force and reduces heat concentration at the cutting edge. Combined with the rhombic 55° platform and 11° clearance, this arrangement improves surface finish while preserving the cutting edge, so operators can rely on repeatable results in serial production or one-off precision turning tasks. Flexible geometry for varied turning operations The rhombic 55° form offers versatility across turning tasks, from finishing to medium-depth cuts. The insert’s T3 thickness and the specified cutting geometry ensure sufficient rigidity for stable cutting, while the corner radius balances strength and edge definition to achieve consistent component tolerances. For workshops that machine a mix of stainless steel, titanium and other high-temperature alloys, this insert provides a balance between tool life and part quality, reducing set-up changes and boosting overall throughput. Process benefits and economic rationale Using an insert from the Tiger-tec Silver range with the WSM01 grade supports higher process reliability and often lowers total machining costs through extended tool life and reduced scrap. The design facilitates controlled heat dissipation and stable chip formation, which in many cases results in fewer reworks and predictable cycle times. As a rational investment for demanding turning applications, the insert contributes to efficient production flows and measurable gains in operating uptime. For machining stainless steel and superalloys with consistent quality, request the Walter Tools DPGT11T308-MM4 WSM01 via Metav Werkzeuge for tailored advice and rapid delivery Technical data SKU: DPGT11T308-MM4-WSM01-WALTER Designation: DPGT11T308-MM4 WSM01 Manufacturer: Walter Tools Core specifications Geometry: Rhombic 55° Free angle/clearance: 11° Corner radius: 0.8 mm Thickness: T3 Chipbreaker: MM4 Tolerance class: G Series: Tiger-tec Silver Materials & special features Grade: WSM01 (coated carbide) Designed for: stainless steel Suitable for: heat-resistant superalloys and Titanium Application: turning / indexable insert FAQ What materials is this insert best suited for? The DPGT11T308-MM4 WSM01 insert is engineered for stainless steel and is also suited to heat-resistant superalloys and Titanium where stable edge performance is required. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes consistent chip formation and evacuation, improving process stability and reducing the risk of chip-related surface defects during turning operations. What advantages does the Tiger-tec Silver finish provide? The Tiger-tec Silver coating increases thermal resistance and wear protection, which extends tool life and helps maintain cutting-edge integrity under demanding conditions. Is the rhombic 55° geometry suitable for finishing passes? Yes, the rhombic 55° geometry combined with a 0.8 mm corner radius provides a compromise between edge strength and surface finish, making it suitable for finishing and medium-depth turning. Which Walter Tools product code should be ordered for this insert? Order the insert using SKU DPGT11T308-MM4-WSM01-WALTER to ensure the specified grade, geometry and chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DPGT11T308-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with an MM4 chipbreaker and a robust 0.8 mm corner radius, this insert delivers consistent cutting performance and longer tool life when machining stainless steel and heat-resistant alloys. Order the DPGT11T308-MM4 WSM20S directly via Metav Werkzeuge or ask the consultants for tailored advice. DPGT11T308-MM4 WSM20S – Indexable turning insert, Tiger·tec Silver (Walter Tools) The DPGT11T308-MM4 WSM20S is an indexable turning insert designed for secure chip control and edge stability in stainless steel and high-temperature superalloys. Tiger·tec Silver for high thermal resistance MM4 chipbreaker for stable chip formation Rhombic 55° form for flexible turning 0.8 mm corner radius for durable cutting edge Increased process reliability for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade targets the particular challenges of machining stainless steel and heat-resistant alloys. The multilayer coating improves thermal resistance and reduces adhesion at the cutting edge, resulting in measurable edge stability and extended tool life under high temperatures. For production environments where control of wear mechanisms is critical, this insert supports more predictable tool-change intervals and contributes to higher overall equipment effectiveness. Stable chip control and efficient cutting geometry The MM4 chipbreaker and the 55° rhombic form are optimised for controlled chip formation across a range of cutting depths, reducing the likelihood of built-up edge and unstable chips. The insert’s clearance angle of 11° and a 0.8 mm corner radius balance strength and surface finish, while the T3 plate thickness provides reliable seating in standard insert pockets. These geometry choices translate into consistent cutting forces, easier chip evacuation, and improved process repeatability on continuous and batch turning operations. Clear economic advantages and workshop compatibility By improving edge life and chip behaviour, the design lowers tooling consumption and machine downtime, delivering a positive cost-in-use effect for volume machining of stainless steel and difficult-to-cut alloys. The insert fits common toolholders for the DPGT series, and the tolerance class G supports reproducible positioning and stable clamping. For job shops and production lines seeking a balance of productivity and reliability, this grade offers a pragmatic solution that reduces rework and increases productive machining time. Practical use cases and support for selection Typical applications include general turning and semi-finish operations in stainless steel and nickel-base superalloys where thermal load and material adhesion are issues. The insert’s balanced geometry makes it suitable for both conventional turning and light interrupted cuts when combined with appropriate cutting data. For further technical data or recommendations on cutting parameters, the supplier is available via email or telephone to clarify compatibility with specific toolholders and machining strategies: info@metav-werkzeuge.com, +49 2822 7131930. For personalised selection and delivery options for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DPGT11T308-MM4-WSM20S-WALTER Label: Drehwendeschneidplatte DPGT11T308-MM4 WSM20S Walter Tools Product type: Drehwendeschneidplatte ISO designation: DPGT11T308-MM4 WSM20S Series: Tiger-tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 0.8 mm Plate form: Rhombus 55° Plate size: 11 Plate thickness: T3 Tolerance class: G Special features Coating: Tiger·tec Silver Chipbreaker: MM4 Sort/grade: WSM20S Applicable material groups: S / M Suitable for stainless steel FAQ Which materials is this insert suitable for? The DPGT11T308-MM4 WSM20S is specified for stainless steel and heat‑resistant superalloys (material groups M and S), offering thermal resistance and stable chip control for these alloys. What benefits does the MM4 chipbreaker provide? The MM4 chipbreaker on this Walter Tools insert promotes predictable chip control and reduces the risk of built-up edge, improving surface finish and process stability during turning. Can this insert be used for finishing operations? With a 0.8 mm corner radius and a balanced geometry, the insert is appropriate for semi-finish and many finishing tasks, depending on the chosen cutting parameters and machine rigidity. How does the tolerance class affect mounting and repeatability? The tolerance class G ensures precise seating and repeatable positioning in the toolholder, contributing to consistent cutting conditions and reduced setup variation. Is this insert compatible with standard DPGT toolholders? Yes, the geometry and ISO designation align with common holders for the DPGT family, enabling straightforward integration into existing turning setups. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original and brand-new from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
DPMT070204-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a dedicated FP4 chipbreaker for reliable chip control and extended tool life; the insert is optimised for steel machining and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. DPMT070204-FP4 WPP10G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools DPMT070204-FP4 WPP10G is an indexable turning insert engineered for productive steel machining, combining a coated-carbide grade with a dedicated chipbreaker for stable turning operations Tiger·tec Gold coated carbide for longer tool life Optimised FP4 chipbreaker for stable chip control 11° relief angle for reliable cutting action 0.4 mm corner radius for fine surface finish Increased productivity through a wear-resistant cutting grade The combination of the WPP10G grade and the Tiger·tec Gold coating delivers a robust, wear-resistant cutting edge that supports higher material removal rates in steel applications. This coated carbide composition reduces flank wear under typical turning temperatures and maintains edge strength over longer cycles. The outcome is measurable: fewer insert changes, stable process times and a more predictable machining rhythm, which all contribute to improved line throughput and reduced downtime. Consistent chip control and improved surface results Engineered around the FP4 chipbreaker and an optimised geometry, the insert secures reliable chip formation in a range of steel conditions. The modest 0.4 mm corner radius together with the rhombic 55° form promotes a balanced cutting engagement that helps achieve a smoother finish with reduced risk of chatter. Controlled chips and a predictable cutting force make downstream handling easier and cut rework time, improving overall part quality. Designed specifically for steel applications with clear technical fit This insert is intended for the machining of steels (material group P) and is balanced for the thermal and metallurgical behaviour typical of such materials. The moderate 11° relief angle supports a stable contact zone and reduces cutting edge stress during continuous turning. For engineers and planners, the result is a single grade that covers a broad spectrum of steel types, offering the flexibility to standardise tooling across multiple turning tasks without sacrificing performance. Trusted manufacturing and repeatable performance Produced under the Walter Tools umbrella and carrying the Tiger·tec Gold technology, the insert benefits from tight manufacturing tolerances and repeatable edge quality. The stable cut behaviour and consistent insert geometry support predictable tool life and reproducible component surfaces, which is particularly valuable in series production and quality-focused workshops. The robust design reduces unexpected tool failures and contributes to reliable planning of maintenance intervals. For application advice, ordering or to assess compatibility with existing tool holders, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 — for tailored support on Walter Tools Tiger·tec Gold inserts like the DPMT070204-FP4 WPP10G Technical Data SKU: DPMT070204-FP4-WPP10G-WALTER Designation: DPMT070204-FP4 WPP10G Type: indexable turning insert Grade/series: WPP10G, Tiger·tec Gold Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Size: 07 Thickness: 02 Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: FP4 Shape: Rhombus 55° Material suitability: Steel (P) Schneidstoff class: coated carbide FAQ What materials is this insert suitable for? This insert is specified for steel applications (material group P) and the WPP10G grade is tailored to the thermal and chip-formation behaviour of steels. What benefit does the FP4 chipbreaker provide? The FP4 chipbreaker produces controlled, segmented chips for improved evacuation and reduces the risk of built-up edge, aiding consistent surface quality during turning. How does the Tiger·tec Gold coating influence tool life? The Tiger·tec Gold coating increases wear resistance and thermal stability of the coated carbide, extending the effective lifespan of the cutting edge in steel machining. Is the insert geometry suitable for finishing operations? With a 0.4 mm corner radius and a rhombic 55° shape, the geometry supports fine surface finishes while maintaining edge strength for light to medium finishing passes. Can the insert be used in high-speed applications? The coated-carbide construction and Tiger·tec Gold technology provide enhanced wear behaviour; recommended cutting parameters should be verified for each machine and material combination. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
DPMT070204-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold technology and the MP4 chipbreaker for extended tool life and secure chip control; the rhombic 55° geometry with an 11° clearance and 0.4 mm corner radius delivers precise finishing and consistent results — order directly via Metav Werkzeuge or consult the team for process matching. DPMT070204-MP4 WPP20G indexable turning insert — Tiger‑tec Gold, for steel The DPMT070204-MP4 WPP20G is an indexable turning insert designed for general steel turning applications, combining a Tiger‑tec Gold coated carbide grade with an MP4 chipbreaker for stable, productive machining. *Tiger‑tec Gold coating for wear resistance *MP4 chipbreaker for reliable chip control *Rhombic 55° geometry for versatile turning *Corner radius 0.4 mm for precise finishing Longer tool life through advanced coating technology The insert is supplied in the WPP20G grade from the Tiger‑tec Gold series, a coated carbide concept engineered for machining steel. The multilayer coating improves wear resistance and thermal stability, which extends tool life and reduces the frequency of index changes. For process planners this means more predictable tool performance and lower tooling costs per component; the coating is optimised for the typical heat and chip formation encountered when machining steel, so consistent results are achieved across medium- and high-volume production runs. Improved chip control and surface quality Equipped with the MP4 chipbreaker and a Rhombic 55° geometry, the insert enables controlled chip formation and evacuation in a broad range of cutting conditions. The 11° clearance ensures effective relief behind the cutting edge, reducing rubbing and heat generation, while the corner radius 0.4 mm helps to produce a stable cutting edge for improved surface finish. By combining chip control and edge geometry, the insert supports smoother machining, fewer interruptions and more reliable part quality in turning operations on steel. Process reliability and integration into production Rated to tolerance class M and available in plate size 07 with plate thickness 02, this insert fits standard toolholders and is suitable for repeatable industrial use. The designation indicates suitability for the ISO P group (steel), so the grade is appropriate for unalloyed and alloyed steels where balanced wear resistance and toughness are required. The technical specification supports predictable tool life and simplified tool change intervals, contributing to stable cycle times and easier planning for maintenance and inventory management. Contact Metav Werkzeuge for tailored tooling advice and fast delivery — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — the Metav team will assist with grade and holder selection for optimal machining results. Technical data SKU: DPMT070204-MP4-WPP20G-WALTER Article designation: DPMT070204-MP4 WPP20G Product type: Indexable turning insert Brand: Walter Tools Numbers / Core technical data Geometry: Rhombic 55° Clearance angle: 11° Corner radius: 0.4 mm Plate size: 07 Plate thickness: 02 Tolerance class: M Designs / Special features Chipbreaker: MP4 Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Material group: P (steel) Execution: T FAQ What materials is this insert suitable for? The DPMT070204-MP4 WPP20G insert is specified for the ISO P group and is suitable for machining steel, including both unalloyed and alloyed steels. How does the MP4 chipbreaker influence machining? The MP4 chipbreaker promotes controlled chip formation and efficient evacuation, which improves process stability and reduces the risk of built-up edge during turning with this insert. Which toolholders are compatible with this geometry? The Rhombic 55° format and 07 size correspond to standard holder ranges; compatibility should be confirmed against the holder catalogue but the DPMT070204-MP4 WPP20G is designed for common turning tool systems. What production benefits does the Tiger‑tec Gold grade provide? Tiger‑tec Gold coatings enhance wear resistance and thermal stability, leading to longer index life and more consistent machining results when turning steel. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
DPMT11T304-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Gold coating and the WPP10G grade for consistent tool life and stable chip formation. The design delivers dependable performance in steel turning operations and supports efficient, repeatable machining — order via Metav Werkzeuge or consult our team for application advice. DPMT11T304-FP4 WPP10G T – Indexable turning insert for steel, Tiger·tec Gold by Walter Tools A DPMT11T304-FP4 WPP10G indexable turning insert optimised for steel turning, offering robust chip control with an FP4 breaker and adaptable Rhombus 55° geometry for versatile turning tasks Tiger·tec Gold coating for extended tool life WPP10G grade for reliable steel machining Rhombus 55° geometry for versatile turning FP4 chipbreaker for controlled chip formation High productivity through a durable coated grade The combination of the Tiger·tec Gold coating and the WPP10G grade gives the insert a clear advantage where high productivity and predictable wear behaviour are required. The coating reduces flank and crater wear, which increases the number of productive parts per edge and reduces downtime for index changes. For workshops machining a broad range of steel grades, this specification supports longer cutting windows and consistent component quality, translating into measurable process stability and lower unit costs. Controlled chip formation and improved surface quality The integrated FP4 chipbreaker paired with the Rhombus 55° geometry creates stable chip flow and helps avoid long, stringy chips that disrupt turning operations. The 11° free angle and a 0.4 mm corner radius contribute to a favourable cutting edge engagement, which supports a good surface finish on profiles and external diameters. These features reduce the need for secondary finishing and make the insert suitable for repeatable finishing passes where a consistent surface texture is required. Versatile application for steel turning and simple tool management Designed for the ISO P material group, the insert is primarily intended for unalloyed and alloyed steel applications and covers a wide spectrum from tougher to more wear-prone steels. The T3 thickness and standard tolerance class M ensure compatibility with common toolholders and stable seating in the cutter body, simplifying tool change and inventory management on the shop floor. As an indexable solution from Walter Tools, it supports quick edge reversal and predictable performance for batch and single-piece production. For tailored tooling recommendations and supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and order placement. Technical Data Article number: DPMT11T304-FP4-WPP10G-WALTER Designation: DPMT11T304-FP4 Full designation: DPMT11T304-FP4 WPP10G Brand: Walter Tools Product type: Indexable turning insert Facts Geometry: Rhombus 55° Free angle: 11° Corner radius: 0.4 mm Plate size: 11 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G Chipbreaker: FP4 Material group: P (steel) Series: Tiger-tec Gold Execution: T FAQ What materials is this insert suitable for? The DPMT11T304-FP4 WPP10G insert is specified for the ISO P group and is intended for machining unalloyed and alloyed steel. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the DPMT11T304-FP4 promotes controlled chip formation, improving process reliability and often reducing the need for secondary chip handling. What are the key geometry values to consider for setup? Important setup values include the Rhombus 55° form, a free angle of 11° and a corner radius of 0.4 mm; these influence engagement, cutting forces and surface finish. Is the WPP10G grade suitable for high-volume production? Yes, the WPP10G grade with Tiger·tec Gold coating is designed for high productivity and stable wear performance in continuous steel turning operations. Can this insert be used in standard turning toolholders? The insert’s dimensions and T3 thickness with tolerance class M are compatible with standard indexable turning toolholders designed for this family of inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for clarification only and do not imply any affiliation between Metav Werkzeuge and the trademark holders. The offered item is an original, factory-new product from the manufacturer Walter Tools.
DPMT11T304-MP4 WPP20G Wendeplatten - Walter Tools
Combine proven wear resistance and controlled chip formation for reliable steel turning; the Tiger·tec Gold grade and MP4 chipbreaker together support consistent productivity and longer tool life. Order the insert directly via Metav Werkzeuge or consult our application team for machining guidance. DPMT11T304-MP4 WPP20G rhombic 55° turning insert, Tiger·tec Gold – Walter Tools A DPMT11T304-MP4 WPP20G turning insert engineered for steel turning, offering stable chip control and extended wear resistance in general turning applications Tiger·tec Gold coating for extended tool life Optimised MP4 chipbreaker for stable chips Rhombic 55° form for versatile turning Suitable for steel machining (ISO P) Faster, more predictable steel machining through optimised chip control The combination of a dedicated MP4 chipbreaker and the WPP20G cutting grade reduces long, stringy chips and promotes short, manageable chips when machining steel. This leads to fewer interruptions for chip clearing and a steadier process, which in turn increases throughput. The insert geometry – a rhombic 55° platform with a 0.4 mm corner radius – supports versatile turning tasks, from light finishing cuts to moderate roughing, while maintaining a predictable cutting force and surface integrity. Durable coating and substrate for longer operating cycles Built on the Tiger·tec Gold technology, the coated carbide grade delivers improved wear resistance and a stable cutting edge across typical steel applications. The grade is specified for ISO group P (steel), offering a balance between toughness and hardness that reduces flank wear and cratering under elevated cutting temperatures. As a result, tool change intervals are extended and process stability is enhanced, contributing to a lower overall cost per component through reduced downtime. Geometry and tolerance deliver consistent results in production With a tolerance class of M, the insert ensures repeatable fit and seating in standard toolholders, supporting reproducible cutting conditions across multiple inserts. The 11° clearance angle and the Rhombic 55° form allow good access to contours while maintaining edge strength. These geometric decisions translate into consistent part quality and reduced setup variation, which is particularly valuable in small-batch and series production where reproducibility is essential. Practical advantages for workshop and industrial environments The insert’s designation and chip control make it suitable for a wide range of steel grades, addressing typical machining challenges such as heat generation and chip formation. The robust cutting edge and coated surface reduce the need for frequent regrinding, while compatibility with common clamping systems simplifies tool inventory. For operations seeking steady cycle times and predictable surface finishes, this solution supports efficient process planning and reduced scrap rates. For application-specific advice or availability of Walter Tools turning inserts, contact Metav Werkzeuge for machining recommendations and ordering support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DPMT11T304-MP4-WPP20G-WALTER Designation: DPMT11T304-MP4 WPP20G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core Data Clearance angle: 11° Corner radius: 0.4 mm Insert size: 11 mm Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP4 Material group: P (steel) Shape: Rhombic 55° Execution: T FAQ What materials is this insert designed to machine? The DPMT11T304-MP4 WPP20G turning insert from Walter Tools is intended for machining steels (ISO group P), optimised for typical steel heat and chip formation behaviour. How does the MP4 chipbreaker affect production stability? The MP4 chipbreaker on this insert produces short, controlled chips, which improves process continuity and reduces interruptions for chip removal during turning operations. Is the Tiger·tec Gold coating suitable for high-volume production? Yes; the Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and edge stability, supporting longer tool life and consistent results in repetitive production runs. Can the insert be used for finishing operations? With a 0.4 mm corner radius and a rhombic 55° geometry, the insert performs well in finishing and light to moderate turning tasks where a balance of edge strength and surface quality is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is an original, brand-new product of Walter Tools. The Walter AG (brand presence: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
DPMT11T308-FP4 WPP10G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP10G grade provides high process security and long tool life, while the FP4 chipbreaker and 11° clearance ensure controlled chip formation and consistent surface finish in Stahl turning. Order the DPMT11T308-FP4 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed. DPMT11T308-FP4 WPP10G turning insert — Tiger‑tec Gold, FP4 chipbreaker (Walter Tools) The DPMT11T308-FP4 WPP10G is a rhombic 55° indexable insert engineered for efficient turning of Stahl, combining a Tiger‑tec Gold coated carbide grade with an FP4 chipbreaker for stable, productive machining. Tiger‑tec Gold coated grade WPP10G FP4 chipbreaker for reliable chip control Rhombic 55° form with 0.8 mm corner radius 11° clearance and T3 thickness for stable cutting High process reliability and extended tool life for Stahl turning The Tiger‑tec Gold coating, applied to the WPP10G grade, delivers improved resistance to wear and thermal loads, which translates into longer tool life and fewer index changes. For shops working predominantly with Stahl (ISO group P), this means a more predictable machining process and reduced unplanned downtime. The coated carbide substrate supports consistent cutting-edge integrity at elevated cutting speeds, enabling higher material removal rates without compromising component tolerances. Such behaviour is particularly valuable in serial production and automated turning centres where uptime is critical. Geometry engineered for chip control and surface quality The rhombic 55° plate geometry, combined with the FP4 chipbreaker and a 0.8 mm corner radius, is designed to manage chip formation and evacuation while maintaining a fine surface finish. The 11° free clearance angle reduces rubbing and heat generation at the flank, helping to preserve the cutting edge and the workpiece finish. Together, these features reduce machining vibrations and contribute to repeatable dimensional accuracy, especially when turning medium to hard Stahl grades under continuous cutting conditions. Practical selection and workshop integration for reliable results The insert is supplied in the DPMT11T308-FP4 designation with a T3 thickness and tolerance class M, offering a compact solution for a wide range of turning applications. The WPP10G grade is a coated cemented carbide optimised for Stahl, balancing wear resistance and toughness to perform across a broad spectrum of turning tasks. When replacing inserts, match the seat and clamping style of existing toolholders to this insert's rhombic 55° form; appropriate cutting data and coolant strategies will further extend service life. For shops seeking to improve cycle times while keeping component quality high, this insert provides a pragmatic balance of productivity and reliability. For tailored recommendations on integrating Walter Tools Tiger‑tec Gold inserts into production workflows, contact Metav Werkzeuge for application guidance and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: DPMT11T308-FP4-WPP10G-WALTER Label: Drehwendeschneidplatte DPMT11T308-FP4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: turning insert Grade / sort: WPP10G Series: Tiger‑tec Gold Chipbreaker: FP4 Core technical data Corner radius: 0.8 mm Free clearance angle: 11° Plate form: Rhombic 55° Size designation: 11 Thickness: T3 Tolerance class: M Execution: T Materials & special features Coating / cutting material: Tiger‑tec Gold (coated cemented carbide) Target material group: Stahl (ISO group P) Inscribed designation: DPMT11T308-FP4 WPP10G Plate family: Tiger‑tec Gold Suitable for turning operations requiring controlled chip formation FAQ Which materials is this insert designed to machine? The DPMT11T308-FP4 WPP10G insert from Walter Tools is designed primarily for machining Stahl (ISO group P), where its coated carbide grade and chipbreaker manage the typical heat and chip characteristics of steel. How does the FP4 chipbreaker affect machining performance? The FP4 chipbreaker promotes predictable chip formation and evacuation; when combined with the rhombic 55° geometry and 0.8 mm corner radius, it helps to improve surface finish and reduce tool wear during continuous turning of Stahl. What does the 11° free clearance angle mean for everyday use? An 11° clearance angle reduces flank contact and heat build-up, which contributes to prolonged edge life and consistent dimensional results—benefits that are evident in longer series runs and automated turning processes. Is the insert compatible with standard toolholders for DPMT-type plates? Yes, the DPMT11T308-FP4 designation follows common DPMT seating and clamping standards; verifying holder compatibility and clamping torque is recommended prior to production use. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Markennamen and protected trade names are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the listed brands. The offered item is an original, factory-new product of the manufacturer.
DPMT11T308-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide, reliable MP4 chip control and a compact rhombic geometry for consistent productivity in steel turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DPMT11T308-MP4 WPP20G indexable turning insert — Tiger·tec Gold coating, MP4 chipbreaker (Walter Tools) A DPMT11T308-MP4 WPP20G indexable turning insert engineered for steel machining, offering a Tiger·tec Gold coated carbide grade and a dedicated MP4 chipbreaker for stable cutting performance. Tiger·tec Gold coating for long tool life MP4 chipbreaker for reliable chip control Rhombic 55° insert with 0.8 mm corner radius Suitable for steel machining (ISO group P) Reliable cutting edge life for efficient batch production The combination of the Tiger·tec Gold coating and the WPP20G grade produces a coated carbide surface that resists abrasive and adhesive wear during continuous turning of steels. Designed for the thermal and mechanical conditions typical of ISO group P materials, this configuration yields predictable flank wear and longer edge life, which reduces tool change frequency and production interruptions. The result is improved overall process efficiency and lower unit costs in repetitive turning tasks. Consistent chip control that protects the workpiece and machine Equipped with the MP4 chipbreaker, the insert promotes controlled chip formation and evacuation at a wide range of cutting parameters. The positive geometry of the rhombic 55° shape combined with an 11° clearance angle helps maintain a steady cutting force and reduces vibration; this supports a better surface finish and repeatable dimensional accuracy. Tolerance class M ensures interchangeability and secure seating in standard toolholders, contributing to consistent part quality across production runs. Geometry tailored for versatile turning operations With an insert size of 11 and a corner radius of 0.8 mm, the design balances edge strength and the capacity for fine contouring. The T3 plate thickness provides sufficient rigidity for medium-duty turning tasks while allowing favourable cutting engagement in a variety of turning applications. The rhombic form enables use in internal and external turning operations where a 55° insert offers good access and visual control of the cutting edge. This geometry supports quick adaptation between roughing and finishing with minimal setup changes. Practical selection and integration into existing tooling systems The insert is supplied in the DPMT11T308-MP4 WPP20G designation, matching common tooling conventions for indexable turning systems and enabling straightforward replacement and inventory management. Its specification for steel (ISO group P) simplifies grade selection for mixed-production environments where multiple materials are machined. For complex applications or uncertain cutting data, technical consultation is recommended to align speeds, feeds and depths of cut with the machine and holder in use. For reliable, high-productivity turning with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised recommendations and ordering: info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: DPMT11T308-MP4-WPP20G-WALTER Designation: DPMT11T308-MP4 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Core specifications Insert size: 11 Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: T3 Insert shape: Rhombic 55° Tolerance class: M Materials and features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MP4 Material application: Steel (ISO group P) Execution: T FAQ What materials is this insert designed for? The DPMT11T308-MP4 WPP20G insert is specified for machining steel and addresses the typical heat and chip-formation behaviour of ISO group P materials. How does the MP4 chipbreaker improve machining? The MP4 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which helps maintain surface finish and reduces the risk of clogging or toolholder damage. Is the insert suitable for finishing passes? With a 0.8 mm corner radius and rhombic 55° geometry, the insert supports fine contouring and can be used for semi-finishing and finishing, depending on cutting parameters and machine rigidity. What does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances wear resistance and thermal stability of the coated carbide, extending edge life and improving performance in continuous steel turning applications. Can this insert be used in standard toolholders? Yes; the DPMT11T308-MP4 WPP20G follows common ISO designation conventions and tolerance class M for compatibility with standard indexable turning toolholders. Walter Tools (Walter AG) is part of the Walter group and headquartered in Tübingen, Germany. The Walter AG (brand appearance: Walter Tools) is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation purposes only and do not imply any affiliation between our company and those brands. The offered item is an original, brand-new product from the manufacturer.
Drehwendeschneidplatte RCMT1204M0-RM4 WMP30G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear resistance together with the RM4 chipbreaker and a 7° clearance for dependable performance when machining stainless steels; order genuine inserts via Metav Werkzeuge or contact the technical consultants for application advice. RCMT1204M0-RM4 WMP30G turning indexable insert — Tiger·tec Gold, for stainless steel, Walter Tools A RCMT1204M0-RM4 WMP30G turning indexable insert designed for reliable stainless steel machining under medium to robust cutting conditions, offering a combination of durable coating and dedicated chip control. Tiger·tec Gold wear-resistant coating RM4 chipbreaker for stable chips Suited to machining stainless steel 7° clearance angle for dependable cutting Longer tool life through optimised coating technology The combination of the Tiger·tec Gold coating and the WMP30G substrate is tailored to enhance tool life when tackling stainless steels. The coated carbide composition supports a stable cutting edge and reduces the tendency to build up material on the edge during interrupted cuts. This results in fewer index changes and more consistent cycle times, which improves process economy in batch production or continuous turning operations. Predictable chip formation and surface quality The RM4 chipbreaker geometry, matched to the round insert form, produces short, manageable chips and lowers the risk of entanglement in the machining zone. With a 7° clearance angle and a compact insert thickness, the geometry helps maintain a steady cutting condition and supports improved surface finish on ferritic and austenitic stainless grades. The predictable chip behaviour reduces machining interruptions and supports smoother downstream handling. Integration into production for consistent results The insert’s designation and format make it straightforward to integrate into standard clamping systems and toolholders used in turning operations. The round form delivers multiple cutting edges per index, improving uptime and cutting economy. With its WMP30G grade and wear-focused design, the insert is an economical choice where reproducible results and low variance between batches are required to keep assembly and inspection schedules on track. Application guidance and machining benefits Designed specifically for the machining demands of stainless steel, the insert supports operations prone to high temperatures and edge build-up. The coating technology enhances oxidation resistance and edge robustness, while the chipbreaker maintains stable chip flow. Selecting this insert can reduce the need for frequent intervention and helps secure consistent component tolerances in serial production. Contact Metav Werkzeuge for application recommendations and to source genuine Walter Tools Tiger·tec Gold turning inserts tailored to specific stainless steel grades Technical data SKU: RCMT1204M0-RM4-WMP30G-WALTER Article label: Drehwendeschneidplatte RCMT1204M0-RM4 WMP30G Walter Tools Product type: Turning indexable insert Manufacturer: Walter Tools Facts Clearance angle: 7° Size: 12 Thickness: 04 Tolerance class: M Special features Grade: WMP30G Series: Tiger·tec Gold Chipbreaker: RM4 Form: round Base designation: RCMT1204M0-RM4 Full ISO designation: RCMT1204M0-RM4 WMP30G Suitable for: rostfreier Stahl FAQ Which materials is this insert suitable for? The RCMT1204M0-RM4 WMP30G insert from Walter Tools is formulated primarily for rostfreier Stahl (stainless steel) and performs well under medium to robust cutting conditions. What does the Tiger·tec Gold grade provide? The Tiger·tec Gold coating on the WMP30G grade improves wear resistance and thermal stability, helping the insert maintain cutting-edge integrity during turning of stainless steels. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker produces controlled, short chips that lower the risk of chip entanglement and support a consistent surface finish when using this round insert. What is the significance of the 7° clearance angle? A 7° clearance angle reduces friction behind the cutting edge and contributes to reliable cutting performance, particularly useful when machining tough, adhesive stainless steel grades. Can this insert be used in standard toolholders? The RCMT1204M0-RM4 format is compatible with conventional turning toolholders designed for round indexable inserts, allowing straightforward replacement and indexing. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
ENMX08T316R-D27 WHH15X Wendeplatten - Walter Tools
Take advantage of the coated carbide WHH15X grade and the robust 1.6 mm corner radius for dependable milling performance and stable chip control; the negative 0° rake supports repeatable cutting behaviour in demanding operations. Order directly via Metav Werkzeuge or consult our advisors for application-specific selection and rapid availability. ENMX08T316R-D27 WHH15X Fräswendeschneidplatte — Walter Tools, coated carbide, Rhombic 75° The ENMX08T316R-D27 WHH15X is a rhombic 75° indexable insert designed for versatile milling tasks where stable cutting and reliable edge life are required Coated carbide grade WHH15X Rhombic 75° insert geometry 1.6 mm corner radius for edge strength Negative 0° rake for stable cutting Higher productivity through controlled chip formation and repeatable performance The combination of a coated carbide grade and a dedicated chipbreaker D27 delivers predictable chip formation and consistent removal rates. The engineered chip control of this insert reduces the risk of chip re-cutting and helps to maintain cycle times on medium- to high-production setups. As a result, the toolholder assembly achieves improved process efficiency and reduced downtime between operations. The focus here is clear: improved material removal with stable forces for repeatable component quality. Geometry that supports accuracy and longer edge life The rhombic 75° geometry and a 1.6 mm corner radius provide a robust cutting edge that resists chipping under interrupted cuts and moderate engagement angles. The negative 0° rake creates a sturdier cutting corner, which favours applications where edge strength is prioritised over ultra-fine finishing. This geometry is ideal when production demands both reliable tool life and consistent dimensional results; customers gain both fewer tool changes and a predictable surface quality without compromising throughput. Clear selection guidance for industrial usage Selection of the insert should follow the product’s material matrix and application data; the WHH15X grade is a coated cemented carbide developed for general-purpose milling but material suitability must be verified against the specific workpiece and cutting conditions. The insert’s T3 thickness and nominal size designation allow easy integration into common milling holders. For process planners and buyers, the practical benefit is straightforward: simple inventory compatibility with established toolholder systems and a grade engineered to balance wear resistance and reliable cutting behaviour. For reliable milling results with Walter Tools’ WHH15X coated carbide insert, contact Metav Werkzeuge for tailored application advice and swift supply coordination. Technical data SKU: ENMX08T316R-D27-WHH15X-WALTER Name: Fräswendeschneidplatte ENMX08T316R-D27 WHH15X Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core specifications Insert form: Rhombus 75° Insert size: 08 Corner radius: 1.6 mm Thickness: T3 Rake angle: 0° (negative) Tolerance class: M Design & features Grade: WHH15X (coated cemented carbide) Chipbreaker: D27 Execution: X ISO designation: ENMX08T316R-D27 WHH15X FAQ What milling operations is this insert suited for? This insert is intended for general milling tasks where robust edge life and controlled chip formation are required; the ENMX08T316R-D27 WHH15X performs reliably in medium to high-production milling. Which materials can be machined with this grade? Material suitability for the WHH15X grade must be verified against the manufacturer’s product matrix; the grade is a coated cemented carbide and its application range should be checked for each workpiece material. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength and resistance to chipping, improving tool life during interrupted cuts and offering greater process security for repeatable component tolerances. What role does the chipbreaker D27 play? The D27 chipbreaker is designed to produce smaller, manageable chips, reducing the risk of re-cutting and improving surface finish consistency under stable cutting conditions. Is the insert compatible with standard holders? The ENMX08T316R-D27 WHH15X follows common ISO-style insert dimensions and thickness designations, facilitating compatibility with widely used milling toolholders. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new merchandise from the manufacturer.
ENMX08T316R-D27 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the WKK25G grade tailored for abrasive cast iron to keep milling cycles productive and predictable; the rhombus 75° geometry with a 1.6 mm corner radius supports versatile toolpaths and reliable edge life. Order this insert directly via Metav Werkzeuge or consult our technical advisors for application matching. ENMX08T316R-D27 WKK25G — Milling indexable insert, Tiger·tec Gold for cast iron (Walter Tools) A ENMX08T316R-D27 WKK25G milling insert engineered to deliver productive, repeatable results when machining cast iron, combining Tiger·tec Gold coating with a robust insert geometry. Tiger·tec Gold coating for wear resistance Optimised for cast iron (ISO group K) Rhombus 75° geometry for flexible milling 0° negative rake with 1.6 mm corner radius Longer tool life through advanced coating and grade The combination of Tiger·tec Gold coating and the WKK25G carbide grade targets the abrasive wear typical of cast iron, extending service intervals and reducing unplanned downtimes. Coated carbide substrates provide a protective layer that resists flank and crater wear under elevated temperatures, so production runs remain consistent for longer. The result is measurable cost-efficiency: fewer index changes and lower overall tooling consumption while maintaining dimensional accuracy on finished parts. Geometry that increases process stability and versatility The rhombus 75° insert form and 0° negative rake create a geometry well suited to a range of milling strategies, from shoulder cuts to light roughing. The 1.6 mm corner radius strengthens the cutting edge against impact and contributes to a stable surface finish, while the chipbreaker D27 is designed to regulate chip formation in cast iron applications. These combined characteristics enable higher metal removal rates with controlled cutting forces, improving cycle time without compromising tool life. Consistent chip control for safer machining Short, brittle chips are typical when working with cast iron; the integrated chipbreaker D27 promotes predictable chip fragmentation and evacuation, reducing the risk of recutting or toolholder interference. The insert’s specification follows the ISO grouping for cast iron, ensuring the grade and geometry are matched to the material’s tendency for abrasive wear and fractured chips. This leads to safer, cleaner shop-floor conditions and fewer stoppages for manual chip clearing. Easy integration and clear specification for tool selection With the standard designation and compact form factor, this insert fits into common milling tool systems that accept the ENMX-style geometry and size 08 inserts. The Tiger·tec Gold series gives process planners a clear reference for grade selection when specifying tooling for cast iron components. For precise holder compatibility, clamping checks and parameter optimisation, Metav Werkzeuge can assist with technical data and matching toolholder recommendations to ensure a smooth implementation into existing setups. Choose the Walter Tools ENMX08T316R-D27 WKK25G for reliable cast iron performance and contact Metav Werkzeuge for tailored application advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ENMX08T316R-D27-WKK25G-WALTER Label: Fräswendeschneidplatte ENMX08T316R-D27 WKK25G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Gold Core specifications Corner radius: 1.6 mm Relief/clearance: 0° (negative) Insert form: Rhombus 75° Insert size: 08 Thickness: T3 Tolerance class: M Chipbreaker: D27 Features / Materials Grade: WKK25G Coating / technology: Tiger·tec Gold Carbide class: coated carbide Material group: K (cast iron) Execution: X ISO designation: ENMX08T316R-D27 WKK25G FAQ Which materials is this insert best suited for? The ENMX08T316R-D27 WKK25G from Walter Tools is optimised for cast iron (ISO group K), with the grade and coating designed to resist abrasive wear and handle the short, breaking chips typical of those materials. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold is a high-performance coating system applied to the coated carbide substrate that improves wear resistance and thermal stability, extending edge life under the demanding conditions of cast iron milling. What milling tasks is a rhombus 75° insert suitable for? A rhombus 75° geometry is versatile for shoulder milling, profiling and light slotting; the angle provides good access and allows efficient cutting directions while maintaining edge strength. How does the chipbreaker D27 affect machining? The chipbreaker D27 promotes controlled fragmentation and evacuation of chips when machining cast iron, reducing the chance of entanglement and improving process reliability and surface quality. Is the ENMX08T316R-D27 compatible with standard holders and clamping systems? The ENMX08T316R-D27 WKK25G follows common ENMX insert geometry conventions; compatibility depends on the specific toolholder—consult Metav Werkzeuge for matching holder options and clamping parameters to ensure secure fitment. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools is the brand of the Walter AG and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanation only. There is no connection between our company and the mentioned brands beyond the sale of original, factory-new products from the respective manufacturers.
ENMX08T316R-D27 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Silver coating and the WKP25S grade for efficient machining of steel and cast iron; the rhombic 75° geometry with a 1.6 mm corner radius ensures stable cutting and predictable tool life. Order directly via Metav Werkzeuge or request tailored cutting data from our consultants for seamless integration into existing production. Fräswendeschneidplatte ENMX08T316R-D27 WKP25S — milling indexable insert for steel and cast iron by Walter Tools A high-performance milling insert from the Tiger·tec Silver series, designed for productive machining of steel (P) and cast iron (K) with a D27 chipbreaker and a rhombic 75° form Tiger·tec Silver coating for process reliability WKP25S grade optimised for steel and cast iron Rhombic 75° form with 1.6 mm corner radius Negative 0° rake for stable cutting geometry Reliable performance through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP25S cutting grade delivers a balance of wear resistance and edge stability that benefits repetitive milling operations. Coating technology reduces adhesive wear and improves thermal resistance, which in turn extends the interval between indexings. For industrial environments where cycle-time and predictable tool life matter, this insert supports consistent surface quality and less unplanned downtime. Geometry designed for stability and repeatable results The rhombic 75° shape and 0° (negative) rake provide a robust cutting geometry that resists chipping under interrupted cuts and variable engagement angles. The 1.6 mm corner radius helps to distribute cutting forces, resulting in improved edge life and more uniform wear patterns; this makes the insert especially suitable where stable form and repeatability are required for serial production or component families. Machining scope and chip control for efficient processes With a D27 chipbreaker, the insert is configured to produce controlled, short chips when working with steels and cast irons, reducing the risk of chip entanglement and improving machine uptime. The designation P / K indicates suitability for unalloyed and alloyed steel as well as cast iron, aligning the tool’s material response with ISO 513 groupings so process planners can rely on predictable behaviour across typical workshop materials. Practical benefits for workshop integration The insert's designation and dimensions correspond to standard toolholder systems, enabling straightforward replacement and inventory handling. The series: Tiger·tec Silver and grade WKP25S are developed for broad material coverage and stable chip formation, assisting in achieving consistent component quality while simplifying grade selection across part families. Integration into existing tool cycles is supported by the insert’s robust geometry and predictable wear characteristics. Contact Metav Werkzeuge for application-specific cutting data, availability and to discuss integration of Walter Tools Tiger·tec Silver inserts into production. Technical data Article number: ENMX08T316R-D27-WKP25S-WALTER Product type: Fräswendeschneidplatte (milling indexable insert) Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Execution: X Facts Geometry: Rhombus 75° Free rake angle: 0° (negative) Corner radius: 1.6 mm Insert size: 08 Thickness: T3 Chipbreaker: D27 Tolerance class: M Special features Coating: Tiger·tec Silver Material suitability: P / K (steel / cast iron) Typical applications: Milling of steel and cast iron Label / ISO designation: ENMX08T316R-D27 WKP25S SKU: ENMX08T316R-D27-WKP25S-WALTER FAQ What materials is this insert suitable for? The ENMX08T316R-D27 WKP25S insert from Walter Tools is designed for steel (P) and cast iron (K) applications, matching the ISO 513 material groups. How does the Tiger·tec Silver coating help production? The Tiger·tec Silver coating on the WKP25S grade increases thermal resistance and wear control, improving tool life and enabling more consistent cycle times in milling operations. Which cutting situations benefit most from the rhombic 75° form? The rhombic 75° geometry is beneficial for versatile milling engagements, offering good stability on transverse and face milling tasks where edge robustness and repeatability are required. Is the insert suitable for interrupted cuts? Yes; the negative 0° rake and robust corner radius of 1.6 mm make the insert resilient to shock loads typical of interrupted cutting. Can the chipbreaker D27 reduce chip-related downtime? The D27 chipbreaker is engineered to produce short, manageable chips when machining steel and cast iron, helping to lower the risk of chip entanglement and downtime. Walter Tools is a brand of the Walter AG (part of the Sandvik Group). Protected trademarks and trade names are the property of their respective owners. Mark names and trademarks are mentioned for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is original, factory-new goods from the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ENMX08T316R-D27 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WKP35G grade for stable chip formation and extended running times; the insert’s rhombus 75° geometry and corner radius 1.6 mm deliver robustness across a range of milling tasks. Order the ENMX08T316R-D27 WKP35G indexable milling insert via Metav Werkzeuge or consult the technical advisers for application support. ENMX08T316R-D27 WKP35G indexable milling insert — Tiger·tec Gold, Rhombus 75°, 1.6 mm — Walter Tools The ENMX08T316R-D27 WKP35G is an indexable milling insert engineered for reliable, high‑productivity machining of steel and cast iron in a wide variety of milling operations. Tiger·tec Gold coating for longer tool life Designed for steel and cast iron applications Rhombus 75° geometry for versatile milling Corner radius 1.6 mm for robust cutting edge Improved productivity through engineered grade and coating The combination of the WKP35G grade and the Tiger·tec Gold coating provides a coated carbide solution optimised for the thermal and abrasive demands of machining steel and cast iron. This engineering focus reduces flank wear and promotes stable chip formation, which in turn supports higher average cutting parameters and fewer interruptions for tool change. For production environments that prioritise throughput and repeatable results, the result is predictable tool life and improved process security. Geometry that balances cutting strength and versatility The insert’s rhombus 75° form and corner radius 1.6 mm create a robust cutting edge suited to both face and shoulder milling. The negative 0° relief increases edge strength for heavier engagement, while the chipbreaker D27 helps control fragmenting chips common with cast materials. These geometric choices reduce the risk of chipping at interrupted cuts and improve surface quality, making the insert a practical choice where stability and edge integrity matter. Practical integration into milling systems for consistent results Rated to ISO P/K for steel and cast iron, and supplied in size 08 with thickness T3, the insert fits standard indexable milling holders and is classified in tolerance class M for consistent interchangeability. Execution marked as X indicates the specific style within the series. When set up with appropriate feeds and speeds for the chosen toolholder and machine rigidity, the insert contributes to shorter cycle times and more predictable part quality. For application-specific recommendations and process windows, Metav Werkzeuge offers targeted technical support. Contact Metav Werkzeuge today for availability, application guidance and sample requests for the Walter Tools ENMX08T316R-D27 WKP35G indexable milling insert — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data SKU: ENMX08T316R-D27-WKP35G-WALTER Article designation: ENMX08T316R-D27 WKP35G Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WKP35G Applicable material groups: P (steel), K (cast iron) Edge form: Rhombus 75° Corner radius: 1.6 mm Special features Coating: Tiger·tec Gold coated carbide Chipbreaker: D27 Relief/clearance: 0° (negative) Plate thickness: T3 Size designation: 08 Tolerance class: M Execution: X FAQ What materials is this insert suitable for? The ENMX08T316R-D27 WKP35G insert is specified for steel (ISO group P) and cast iron (ISO group K), reflecting the WKP35G grade and Tiger·tec Gold coating designed for those material behaviours. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and heat management, resulting in longer cutting edge life and more consistent performance during extended milling runs. Which geometry applications suit the rhombus 75° shape? The rhombus 75° geometry is versatile for face and shoulder milling; combined with the 1.6 mm corner radius it provides a balance between cutting strength and surface finish for both roughing and semi‑finishing tasks. What does the designation ENMX08T316R‑D27 mean for tool selection? This designation indicates the insert form and specific chipbreaker (D27). For matching holders and achieving the intended performance, select a compatible indexable milling cutter specified for size 08 inserts and consult toolholder documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names (including Walter Tools) are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
ENMX08T316R-D27 WPP35G Wendeplatten - Walter Tools
Benefit from the wear resistance and consistent chip control of a Tiger·tec Gold grade insert combined with rhombic geometry and a 1.6 mm corner radius for reliable steel machining; order via Metav Werkzeuge or consult the technical team for application-specific recommendations. ENMX08T316R-D27 WPP35G indexable milling insert for steel — Walter Tools (Tiger·tec Gold, Rhombic 75°) The ENMX08T316R-D27 WPP35G is an indexable milling insert designed for productive machining of steel, featuring a Tiger·tec Gold coating and a Rhombic 75° geometry for stable cutting performance Tiger·tec Gold coating for higher wear resistance WPP35G grade optimised for steel machining Rhombic 75° geometry, 1.6 mm corner radius D27 chipbreaker for secure chip control Longer tool life through advanced coating and substrate The combination of Tiger·tec Gold coating with a coated carbide substrate delivers a marked improvement in abrasive and adhesive wear resistance during steel machining. The WPP35G grade is formulated specifically for ISO P materials, balancing toughness and hardness to maintain edge integrity under the thermal and mechanical loads typical of turning and milling of unalloyed and alloyed steel. This results in reduced flank wear and longer intervals between index changes, supporting continuous production runs and predictable tool-change planning. The negative rake (0°) geometry contributes to stable cutting forces and lower risk of edge chipping when entering interrupted cuts. Consistent chip control and surface quality for productive machining A dedicated D27 chipbreaker combined with the Rhombic 75° form produces short, controlled chips in a wide range of cutting conditions. Controlled chip formation reduces rework and tool interference, improving operator safety and workpiece handling in automated setups. The 1.6 mm corner radius provides a compromise between edge strength and surface finish, enabling effective load distribution at the cutting edge while maintaining acceptable part roughness. Together these characteristics support higher process reliability and reproducible component quality on medium- to heavy-duty steel machining tasks. Application guidance and process integration for industrial use Optimised for the ISO P material group, this insert suits general steel applications including unalloyed and alloyed steels where balanced wear resistance and toughness are required. The designation ENMX08T316R-D27 WPP35G indicates the insert geometry and chipbreaker configuration; the T3 thickness and the Rhombic 75° form facilitate use in a variety of milling holders and tool carriers. For best results in production, match cutting parameters to the workpiece alloy and machine rigidity, prioritising stable clamping and coolant strategies adapted to steel machining to exploit the coating benefits and to extend service life of the cutting edge. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to arrange supply of ENMX08T316R-D27 WPP35G; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ENMX08T316R-D27-WPP35G-WALTER Type: Indexable milling insert Designation: ENMX08T316R-D27 WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Core data Geometry: Rhombic 75° Corner radius: 1.6 mm Relief angle: 0° (negative) Chipbreaker: D27 Insert size: 08 Thickness: T3 Tolerance class: M Features / Applications Coating: Tiger·tec Gold Material group suitability: Steel (ISO P) Substrate: Coated carbide (beschichtetes Hartmetall) Execution: X Series description: WPP35G — grade for balanced wear resistance and toughness FAQ What materials is this insert intended for? The insert is formulated for steel (ISO P); the WPP35G grade and Tiger·tec Gold coating are optimised for machining unalloyed and alloyed steels. How does the D27 chipbreaker affect performance? The D27 chipbreaker promotes controlled chip formation, improving evacuation and contributing to consistent surface finish and process stability during milling of steel. Is the 1.6 mm corner radius suitable for roughing? Yes, the 1.6 mm corner radius offers increased edge strength for more robust cutting conditions, making the insert suitable for many roughing and semi-finishing operations. What does the negative 0° relief angle mean for cutting behaviour? A 0° (negative) relief offers a neutral to protective edge orientation that helps resist fracturing on interrupted cuts and supports stable cutting forces in heavy-duty milling. Which series and coating technology does this insert use? This insert belongs to the Tiger·tec Gold series, featuring a multi-layer coating technology designed to enhance wear resistance and thermal stability in steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany
ENMX08T316R-D27 WSM35G X Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for dependable chip control and extended edge life in demanding stainless steel and superalloy milling; order directly via Metav Werkzeuge or consult the team for application-specific guidance. ENMX08T316R-D27 WSM35G – Rhombus 75° milling insert by Walter Tools (Tiger·tec Gold, 0° negative rake) A ENMX08T316R-D27 WSM35G rhombic milling insert designed for heavy-duty and heat‑resistant materials, offering robust cutting edges for stainless steels and superalloys. Tiger·tec Gold coated grade WSM35G Optimised for stainless steel and superalloys Rhombic 75° geometry with 1.6 mm corner radius 0° negative rake for stable cutting Consistent chip control and production stability for tough alloys The combination of the WSM35G grade and the Tiger·tec Gold coating delivers reliable chip formation and improved edge retention during prolonged milling cycles. Coated cemented carbide in this grade is formulated to resist thermal and mechanical wear, which reduces the frequency of tool changes and supports a steadier production rhythm. For operations dealing with materials classified under ISO group M (stainless steels) and S (heat‑resistant superalloys, titanium), this insert helps maintain process security and predictable cycle times. Geometry engineered for strength and adaptable cutting strategies The Rhombus 75° plate form offers flexible cutting angles and is suited to a variety of toolholder setups, while the 1.6 mm corner radius increases edge strength for roughing and interrupted cuts. The 0° negative rake (negative clearance) reinforces the cutting edge against high mechanical loads, making the insert particularly effective when stability and fracture resistance are priorities. These geometric choices translate into fewer stoppages for broken tools and more consistent component quality. Coating and grade that extend useful tool life A coated carbide construction combined with the Tiger·tec Gold technology improves resistance to adhesive wear and thermal degradation. The D27 chipbreaker promotes predictable chip flow for heavy‑cut scenarios, aiding both surface integrity and evacuation of swarf. As a result, users benefit from longer time between indexings and less variation in part finish, which supports higher machine availability and lower unit costs in series production. Practical application guidance and machining outlook This insert is intended for demanding milling of stainless steels and superalloys where heat build‑up and ductility challenge edge stability. The plate thickness T3 and size code 08 support robust clamping and power transmission in high‑torque operations. For best results, combine with stable toolholders, optimise feed per tooth for the chosen corner radius, and select cutting parameters that balance material removal with thermal management. When specification adherence is required, the tolerance class M indicates suitability for industrial production environments that demand repeatable performance. Contact Metav Werkzeuge for tailored application advice and selection support for Walter Tools Tiger·tec Gold inserts, or request a recommendation for specific stainless steel and superalloy tasks Technical data Article number: ENMX08T316R-D27-WSM35G-WALTER Name: Milling insert ENMX08T316R-D27 WSM35G Manufacturer: Walter Tools Facts Size code: 08 Plate form: Rhombus 75° Corner radius: 1.6 mm Clearance angle: 0° (negative) Plate thickness: T3 Chipbreaker: D27 Tolerance class: M Execution: X Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Coated cemented carbide construction Suitable for stainless steels (ISO M) Suitable for superalloys and titanium (ISO S) Designed for stable chip formation and edge strength Optimised for heavy milling and interrupted cuts FAQ Which materials is this insert suited for? The ENMX08T316R-D27 WSM35G milling insert by Walter Tools is optimised for stainless steels (ISO M) and is also suitable for heat‑resistant superalloys and titanium (ISO S). What geometry details affect cutting performance? The Rhombus 75° form and 1.6 mm corner radius provide enhanced edge strength, while the 0° negative rake improves resistance to mechanical loading during roughing and interrupted milling. Does the insert feature a coating and what is its benefit? Yes—the Tiger·tec Gold coating on the WSM35G grade provides improved thermal and adhesive wear resistance, resulting in extended cutting edge life under high temperatures. What chip control can be expected from the D27 chipbreaker? The D27 chipbreaker supports consistent chip formation and evacuation during heavy material removal, which reduces rework and improves surface finish stability. Which industrial applications are typical for this insert? The insert is geared towards demanding milling applications such as roughing and semi‑finishing of stainless steel components and machining of heat‑resistant superalloys where edge stability and process reliability are essential. Manufacturer: Walter AG; Tübingen, Germany. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Markennames and protected designations are mentioned for clarification only; there is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
ENMX08T316R-D27 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance, universal suitability for steel, stainless steel and superalloys, and a robust 1.6 mm corner radius for reliable finishing and predictable cycle times; order via Metav Werkzeuge or consult our experts for application support. ENMX08T316R-D27 WSP45G — Milling indexable insert, Tiger‑tec Gold, Walter Tools The ENMX08T316R-D27 WSP45G is a rhombic 75° milling insert engineered for versatile face and shoulder milling across steels, stainless steels and heat‑resistant alloys. Tiger‑tec Gold PVD for high wear resistance Suitable for steel, stainless and superalloys Rhombus 75° geometry for flexible engagement 1.6 mm corner radius for stable finishing Reliable performance for demanding milling operations The WSP45G grade from the Tiger‑tec Gold family offers a balanced combination of wear resistance and toughness that translates into longer tool life and fewer indexings. Designed for a broad range of milling tasks on P, M and S groups, the coated cemented‑carbide composition supports consistent cutting under higher temperatures and varied chip formation. In practice, this means improved process security and reduced downtime from tool changes, while maintaining stable cutting forces for efficient cycle times. Geometry and chip control that reduce rework The insert’s Rhombus 75° shape and chipbreaker D27 are tailored to give controlled chip formation in both roughing and finishing passes. A 1.6 mm corner radius increases edge strength for interrupted cuts and helps preserve surface integrity, while the negative 0° rake provides a robust cutting edge suited to heavy engagement and high feed applications. Together these geometry features reduce the risk of built‑up edge and improve dimensional repeatability, lowering the need for manual rework and secondary finishing. Practical benefits on the shop floor and machining strategy In typical milling routines, this insert supports stable tool paths with predictable wear behaviour, which simplifies process planning and tool inventory. The combination of the Tiger‑tec coating technology and the specified edge geometry helps to achieve a reliable surface finish and consistent tool life across varying batch sizes. For workshops aiming for productivity and repeatability, the insert’s performance characteristics contribute to fewer interventions, better machine uptime and a measurable effect on overall throughput when used in compatible tool holders and machining parameters. Choose the Walter Tools Tiger‑tec Gold insert for stable, productive milling and contact Metav Werkzeuge for tailored advice and fast delivery: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: ENMX08T316R-D27-WSP45G-WALTER Label: Fräswendeschneidplatte ENMX08T316R-D27 WSP45G Walter Tools Manufacturer: Walter Tools ISO designation: ENMX08T316R-D27 WSP45G Series: Tiger‑tec Gold Grade: WSP45G Execution: X Tolerance class: M Facts Corner radius: 1.6 mm Geometry angle: 75° Rake angle: 0° (negative) Size designation: 08 Thickness: T3 Special features Coating technology: Tiger‑tec Gold (PVD) Chipbreaker: D27 Shape: Rhombus 75° Material applicability: P / M / S (steel, stainless steel, superalloys/titanium) Intended use: Milling indexable insert FAQ Which materials are suitable for this insert? The ENMX08T316R-D27 WSP45G is specified for P, M and S groups, meaning it is suitable for a wide range of steels, rostfrei (stainless steel) and heat‑resistant superalloys or titanium‑based materials. What advantages does the Tiger‑tec Gold coating bring? Tiger‑tec Gold on the WSP45G grade improves wear resistance and thermal stability, supporting longer tool life and more consistent cutting behaviour under elevated temperatures compared with uncoated grades. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge strength and improves surface finish on shoulders and faces, making the insert more tolerant to interrupted cuts and edge loading while reducing the risk of chipping. Is the insert suitable for heavy engagement and roughing passes? Yes. The negative 0° rake and robust geometry are designed to withstand higher cutting forces, making the insert appropriate for heavier engagements and stable roughing operations. Which chipbreaker should be used for finishing? The chipbreaker D27 provided on this insert balances chip control and surface integrity; for fine finishing passes adjust feeds and speeds accordingly to achieve the required surface tolerance. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, factory‑new merchandise of the manufacturer (Walter Tools).
ENMX08T316R-F47 WHH15X Wendeplatten - Walter Tools
Benefit from the combination of WHH15X coated-carbide endurance, precise chip control F47, and the robust rhombic 75° geometry for consistent productivity; order the ENMX08T316R-F47 WHH15X through Metav Werkzeuge or consult our specialists for application guidance. ENMX08T316R-F47 WHH15X – Indexable milling insert, Rhombus 75°, WHH15X (Walter Tools) The ENMX08T316R-F47 WHH15X is a coated-carbide milling insert engineered for robust, general-purpose milling where reliable chip control and consistent edge life are required. Coated carbide grade WHH15X Rhombic 75° geometry Negative rake 0° for robust cutting 1.6 mm corner radius for edge strength Deliver reliably higher metal removal with consistent chip formation The combination of the WHH15X coated carbide grade and the integrated chipbreaker F47 focuses on steady, controllable chip formation under a range of cutting conditions. The rhombic 75° geometry offers a balance between cutting engagement and insert strength; together with the negative rake (0°) this results in stable cutting forces and reduced edge chipping in interrupted or heavy feeds. For production-oriented workshops, these characteristics translate into fewer tool changes, improved process repeatability and a lower incidence of scrap, thereby raising throughput without sacrificing surface integrity. Built for edge security and predictable tool life in demanding cycles A 1.6 mm corner radius and the T3 insert thickness provide mechanical robustness that supports higher feed rates and greater resistance to premature flank wear. The insert’s tolerance class M ensures dimensional consistency for fixture and cutter alignment, reducing setup time and making insert indexing straightforward. These structural attributes make the component particularly suited to applications requiring dependable performance over extended tool life, where predictable replacement intervals help planning and cost control in serial production. Easy integration and grade selection for varied milling tasks This indexable plate integrates into standard cutter bodies that accept size 08 rhombic inserts and benefits from the Walter Tools material and grade system. Suitability for particular workpiece materials should be verified via the manufacturer’s product matrix, ensuring the WHH15X grade meets specific substrate and machining parameter requirements. The clear geometry and standard form factor simplify inventory management and toolholder compatibility, supporting a pragmatic machining strategy that focuses on uptime and consistent part quality. Choose the WHH15X grade insert from Walter Tools through Metav Werkzeuge for reliable, productive milling; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and availability Technical data Article number: ENMX08T316R-F47-WHH15X-WALTER Label: Fräswendeschneidplatte ENMX08T316R-F47 WHH15X Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert ISO designation: ENMX08T316R-F47 WHH15X Series: Walter Schneidstoffsorte - Serie offen Grade: WHH15X Chipbreaker: F47 Geometry version: X Catalogue note: catalogue-dependent Core measurements Corner radius: 1.6 mm Insert size: 08 Thickness: T3 Relief / rake: 0° (negative) Geometry angle: 75° Tolerance class: M Features & composition Coated carbide grade WHH15X Chip control system: F47 Shape: Rhombus 75° Designation: ENMX08T316R-F47 Application guidance: check product matrix for material suitability FAQ What cutting tasks is this insert intended for? This insert is intended for general-purpose and productivity-focused milling operations where robust cutting and good chip control are required; suitability for specific materials should be checked against the manufacturer’s product matrix for the ENMX08T316R-F47 WHH15X. Which geometry and chip-control features define its performance? The rhombic 75° geometry combined with the chipbreaker F47 and a negative rake of 0° deliver stable cutting forces and controlled chips, which supports consistent surface quality and fewer interruptions during metal removal. How does the WHH15X coating affect tool behaviour? The WHH15X coated-carbide composition enhances wear resistance and thermal stability compared with uncoated grades, promoting longer tool life and steady performance under varying cutting conditions. Is the insert suitable for heavy roughing or fine finishing? With a 1.6 mm corner radius and robust geometry, the insert is optimised for medium to heavy material removal and stable cutting; for very fine finishing operations a smaller corner radius or a specifically configured grade may be preferable. How should one ensure compatibility with a cutter body? Confirm that the cutter body accepts size 08 rhombic 75° inserts and use the ENMX08T316R-F47 designation to match seating and clamping parameters; consult the product matrix for grade-to-material recommendations. Protected trademarks and trade names are the property of their respective owners. The mentioned brand names are used for explanatory purposes only and do not imply any affiliation between our company and the manufacturers. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ENMX08T316R-F47 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a robust WKP25S grade and negative‑rake geometry for steady chip control and long tool life; this ensures consistent performance when machining steel and cast iron. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Fräswendeschneidplatte ENMX08T316R-F47 WKP25S – indexable milling insert with Tiger‑tec Silver coating and rhombic 75° form from Walter Tools ENMX08T316R-F47 WKP25S is a precision indexable milling insert designed for productive turning operations where reliable edge life and chip control are required in steel and cast iron machining Tiger‑tec Silver coating, WKP25S grade Suited for steel and cast iron machining Rhombic 75° shape for secure seat and versatility 1.6 mm corner radius for robust edge life High productivity through optimised coating and grade The Tiger‑tec Silver coating combined with the WKP25S carbide grade provides a durable contact surface that reduces adhesive wear and maintains a stable cutting edge. For workshops focusing on repeatable cycle times, this insert delivers consistent tool life when machining P (steel) and K (cast iron) groups according to ISO 513. The coating technology supports higher cutting speeds and improved process security, which translates into fewer tool changes and more uptime on CNC milling centres. Geometry engineered for secure placement and chip control Featuring a rhombic 75° outline and a 0° (negative) rake, the insert offers a stable cutting geometry that resists edge chipping under interrupted cuts. The 1.6 mm corner radius increases edge strength, helping to prolong performance on tougher feeds and depths of cut. The included F47 chipbreaker promotes predictable chip formation for a wide range of feed rates, simplifying parameter selection and reducing the need for frequent machining adjustments. Application advantages and material compatibility This grade and design are tailored for machining both steel and cast iron, addressing the typical heat and wear mechanisms of each material group. The insert’s substrate and coating combination allows it to withstand abrasive graphite in cast iron and the thermal loads encountered with alloyed steels. For machine shops seeking an economical yet high‑performance solution, the insert balances wear resistance with a stable cutting edge, improving part quality without complex tooling changes. Handling, mounting and workplace benefits The insert’s rhombic 75° shape ensures a secure seat in a wide variety of indexable milling cutters and reduces the risk of misalignment during tool changes. As an indexable insert it supports quick indexing for renewed cutting edges, shortening machine downtime. The standard T3 plate thickness and size 08 fit common clamping systems, easing integration into existing tooling inventories while supporting standard safety and handling routines in production environments. Contact Metav Werkzeuge for a machining consultation or to arrange supply and application guidance for this Walter Tools insert Technical Data Article number: ENMX08T316R-F47-WKP25S-WALTER SKU: ENMX08T316R-F47-WKP25S-WALTER Item designation: ENMX08T316R-F47 WKP25S Brand: Walter Tools Data Corner radius: 1.6 mm Free angle / rake: 0° (negative) Insert size: 08 Thickness: T3 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: F47 Shape: Rhombic 75° Applicable materials: Steel (P), Cast iron (K) Execution: X FAQ What materials is this insert intended for? The ENMX08T316R‑F47 WKP25S insert from Walter Tools is suitable for machining steel (P) and cast iron (K) per ISO 513 recommendations. How does the Tiger‑tec Silver coating benefit machining? Tiger‑tec Silver on the WKP25S grade enhances wear resistance and thermal stability, allowing the insert to maintain edge integrity at elevated cutting speeds. What does the rhombic 75° shape affect in milling operations? A rhombic 75° shape provides a secure seating and flexible cutting orientation, improving stability on indexed tools and supporting versatile milling strategies. Is the chipbreaker suitable for a range of feeds? The F47 chipbreaker on this insert is designed for predictable chip formation across various feed rates, aiding consistent surface finish and chip evacuation. Can this insert be easily integrated into existing tool systems? Yes; the size 08 and T3 thickness match common clamping systems for indexable milling inserts, making retrofitting straightforward. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names mentioned herein are the property of their respective owners. Brand names and registered trademarks are cited solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise supplied by the manufacturer (Walter Tools).
ENMX08T316R-F47 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of consistent wear resistance, optimised chip control and geometry-focused stability to raise metal removal rates and confidence in batch production; order the insert directly via Metav Werkzeuge or consult the specialists for application-specific advice. ENMX08T316R-F47 WKP35G milling insert – Tiger·tec Gold, Walter Tools (for Steel & Cast Iron) ENMX08T316R-F47 WKP35G is a negative‑rake, rhombic 75° indexable milling insert engineered for high‑productivity machining of steel (P) and cast iron (K). Tiger·tec Gold coating for long tool life Optimised chipbreaker F47 for controlled chips Rhombic 75° geometry for stable milling Suitable for steel and cast iron machining Higher productivity through stable wear behaviour The Tiger·tec Gold grade WKP35G combines a coated carbide substrate with a coating system engineered for demanding intermittent and continuous milling. The result is predictable wear resistance, which extends the interval between index changes and reduces unplanned downtime. For production environments where cycle times and repeatability matter, the insert’s composition supports consistent surface finish and tool life — an economic advantage for long runs. The series’ design focuses on efficient heat management and abrasion resistance, so maintenance effort is lower and planning becomes more reliable. Reliable chip control for safer, faster machining Equipped with an F47 chipbreaker, the geometry channels swarf into short, manageable fragments suitable for both steel and cast iron operations. The chipbreaker is optimised to reduce chip entanglement and improve evacuation at elevated cutting speeds; this translates into steadier process forces and reduced risk of tool or workpiece damage. Explaining briefly: a chipbreaker shapes how the material fractures and folds away — here giving controlled chips that support higher feed rates with less interruption to the machining cycle. Geometry engineered for rigidity and accessibility The rhombic 75° form provides a stable cutting orientation that balances strength and accessibility in shoulder and face milling. The 0° (negative) relief angle enhances cutting edge robustness for heavy cuts, while the 1.6 mm corner radius contributes to load distribution and improved edge life. The overall plate size 08 and T3 thickness suit a broad range of milling bodies and cutter heads, enabling secure clamping and repeatable positioning. In practice, this geometry reduces vibration and improves dimensional stability when removing larger material volumes. Material versatility and application focus Designed specifically for ISO groups P and K, the grade supports unalloyed and alloyed steels as well as various cast irons. The substrate and coating pairing address both the thermal demands of steel machining and the abrasive nature of many cast materials. For shops that machine mixed material batches, the insert offers a single‑grade solution to simplify tooling logistics while maintaining consistent results across component families. Practical advantages for the workshop The insert’s M tolerance class and manufacturer specifications ensure interchangeability with standard toolholders that accept the ENMX form. The negative rake and robust edge make the insert particularly suitable for operations requiring stable cutting when interrupted cuts or varied engagement occur. This reliability helps to reduce cycle variability and contributes to predictable manufacturing output. For reliable high‑volume milling with Walter Tools Tiger·tec Gold, contact Metav Werkzeuge for tailored application support and fast supply of the ENMX08T316R-F47 WKP35G insert. Technical details Article number / SKU: ENMX08T316R-F47-WKP35G-WALTER Designation: ENMX08T316R-F47 WKP35G Manufacturer: Walter Tools Product type: Milling insert Core data Geometry: Rhombic 75° Size: 08 Corner radius: 1.6 mm Thickness: T3 Relief angle: 0° (negative) Tolerance class: M Chipbreaker: F47 Grade: WKP35G Series / coating: Tiger·tec Gold Applicable material groups: P (steel), K (cast iron) Features Coated cemented carbide Robust cutting edge for heavy cuts Optimised chip control for short chips Suitable for intermittent and continuous milling Execution: X FAQ What materials can be machined with this insert? The ENMX08T316R-F47 WKP35G insert is specified for ISO groups P and K, making it suitable for a wide range of steels and cast irons. Which chip shape does the F47 chipbreaker produce? The F47 chipbreaker is engineered to produce short, controlled chips that improve evacuation and process stability in both steel and cast iron applications. Is the insert suitable for interrupted cuts? Yes; the negative 0° relief and robust edge geometry give the ENMX08T316R-F47 WKP35G good resistance to impact and vibration typical of interrupted milling. How does the Tiger·tec Gold series benefit tool life? The Tiger·tec Gold coating system enhances abrasion and heat resistance, which leads to more consistent wear behaviour and longer intervals between index changes. Can this insert be used in standard toolholders for ENMX forms? The plate follows common ENMX dimensions and an M tolerance class, allowing interchangeability with matching toolholders designed for this form. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and these manufacturers; the offered item is original and factory‑new. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ENMX08T316R-F47 WPP35G Wendeplatten - Walter Tools
Take advantage of a high-performance cutting grade and precise geometry to improve cycle times and tool life; the WPP35G coating and the 0° negative rake combine to deliver stable chip formation and consistent machining of steels. Order these inserts directly via Metav Werkzeuge or contact the specialists for cutting data and application advice. ENMX08T316R-F47 WPP35G milling insert for steel by Walter Tools The ENMX08T316R-F47 WPP35G is a rhombic milling indexable insert designed for efficient steel machining with Tiger‑tec Gold coating and a 1.6 mm corner radius Tiger‑tec Gold coating for extended wear resistance Designed for steel (ISO P) machining Rhombus 75° geometry for stable milling 0° negative rake for robust cutting edge Longer tool life through advanced coating technology The combination of the Tiger‑tec Gold series and the WPP35G grade provides a coated carbide surface engineered for improved heat resistance and reduced flank wear when machining steel (ISO P). This coating technology supports higher metal‑cutting temperatures and helps preserve the cutting edge during interrupted cuts, resulting in fewer index changes and lower tool costs per component. The stated grade emphasises a balance between wear resistance and toughness for universal steel applications. Stable cutting geometry that improves process reliability The rhombus 75° shape and 1.6 mm corner radius deliver a predictable engagement angle and enhanced edge strength, which is advantageous for face and peripheral milling operations. The 0° negative rake adds robustness to the cutting edge, reducing chipping risk under heavy radial loads. The integrated F47 chipbreaker promotes consistent chip formation and evacuation in common steel grades, reducing the likelihood of built‑up edge and improving surface integrity with every pass. Practical benefits for production and tool management Sized as insert code 08 with a T3 thickness and tolerance class M, this indexable plate fits standard milling cutter bodies that accept ENMX‑style inserts. The standardised designation simplifies reordering and tool planning; the robust grade and geometry reduce unexpected tool changes and support steady cycle times. For job shops and production lines seeking reproducible outcomes, the combination of grade and geometry offers a clear efficiency advantage without complex setup changes. Application guidance and expected outcomes Assigned to the ISO P group, the cutting grade is optimised for unalloyed and alloyed steel materials where typical heat and chip behaviours occur. Users can expect reliable edge life in medium to continuous machining operations and good versatility across a range of steels. For unfamiliar users, the designation implies compatibility with standard ENMX housings; machining parameters should be aligned with the workpiece alloy and machine rigidity to exploit the coating benefits fully. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools Tiger‑tec Gold inserts for your steel machining needs Technical Data SKU: ENMX08T316R-F47-WPP35G-WALTER Designation: ENMX08T316R-F47 WPP35G Series: Tiger‑tec Gold Type: Milling indexable insert Core technical data Shape: Rhombus 75° Size code: 08 Thickness: T3 Corner radius: 1.6 mm Rake angle: 0° negative Chipbreaker: F47 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Grade: WPP35G (coated carbide) Suitable for: Steel (ISO P) Manufacturer: Walter Tools Execution: X FAQ What materials is this insert intended for? The ENMX08T316R‑F47 WPP35G milling insert by Walter Tools is specified for machining steel (ISO P) and is designed for the thermal and chip formation characteristics typical of those materials. What does the Tiger‑tec Gold coating deliver? The Tiger‑tec Gold coating on the WPP35G grade provides enhanced heat resistance and wear protection, improving tool life and stability during continuous steel cutting when using this Walter Tools milling insert. Why is the 1.6 mm corner radius important? A 1.6 mm corner radius increases edge strength and distributes cutting forces across a larger area; with the ENMX08T316R‑F47 insert this improves resistance to chipping and supports consistent surface finish during robust milling operations. How does the F47 chipbreaker help in production? The F47 chipbreaker is engineered for predictable chip formation and reliable evacuation when machining steels, which reduces the risk of built‑up edge and contributes to repeatable component quality with this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ENMX08T316R-F47 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a robust 0° negative rake and precise F47 chip control for reliable machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. ENMX08T316R-F47 WSM35G indexable milling insert — Tiger·tec Gold, 0° negative, Walter Tools The ENMX08T316R-F47 WSM35G is an indexable milling insert designed for demanding machining tasks on stainless steel and heat‑resistant superalloys, offering a stable cutting edge and controlled chip formation in heavy‑duty milling. Tiger·tec Gold coated carbide grade WSM35G Optimised chip control with F47 chipbreaker 0° negative rake for increased edge strength Rhombic 75° form with 1.6 mm corner radius Consistent edge life for demanding materials The Tiger·tec Gold coating and the WSM35G carbide matrix deliver a combination of thermal stability and wear resistance that benefits high‑temperature applications. For stainless steel and superalloys the coated substrate supports secure chip formation and reduces the risk of built‑up edge, which in turn helps to maintain surface quality and repeatable tool life. The negative 0° rake increases mechanical robustness at the cutting edge, making the insert less prone to chipping in interrupted cuts. Precision geometry that improves process reliability The rhombic 75° shape and 1.6 mm corner radius provide a balance between strength and finish: the geometry offers a durable cutting corner while allowing effective radial immersion in a range of milling strategies. The F47 chipbreaker is optimised to break and evacuate chips for medium to heavy cutting depths, which reduces cycle time and protects the workpiece from thermal damage. These design choices translate into fewer tool changes and higher overall process uptime. Clear advantages in setup and application With a plate thickness of T3 and the standard size designation 08, the insert is compatible with a broad selection of milling holders that accept the ENMX series form. The tolerance class M and the negative rake make the insert suitable for stable clamping and aggressive feed rates when paired with appropriate toolholders. For workshops seeking predictable performance in serial production, this geometry offers straightforward integration into existing tool systems. Material scope and machining recommendations This grade is intended primarily for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S). The coated carbide composition prioritises thermal resistance and cutting edge stability rather than sheer speed; this supports longer tool life under thermally demanding cuts. For finishing passes the 1.6 mm corner radius helps sustain an acceptable surface finish without compromising the edge integrity required in semi‑roughing operations. Contact Metav Werkzeuge for specific machining parameters and holder recommendations for the ENMX08T316R-F47 WSM35G — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical support and quoting Technical data SKU: ENMX08T316R-F47-WSM35G-WALTER Designation: ENMX08T316R-F47 WSM35G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Plate size: 08 Thickness: T3 Rake angle: 0° (negative) Tolerance class: M Special features Coated carbide grade WSM35G Chipbreaker: F47 Form: Rhombic 75° Applications: stainless steel, heat‑resistant superalloys/titanium Execution: X FAQ What materials is this insert best suited for? The ENMX08T316R-F47 WSM35G is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where thermal stability and edge integrity are essential. How does the 0° negative rake affect performance? A 0° negative rake increases edge strength and reduces chipping risk under heavy loads; the ENMX08T316R-F47 WSM35G uses this to improve robustness in interrupted cuts and tough material conditions. What is the role of the F47 chipbreaker? The F47 chipbreaker on this insert promotes controlled chip segmentation and evacuation during medium to heavy cuts, aiding surface quality and reducing the likelihood of chip re‑cutting. Can this insert be used for finishing passes? Yes; the 1.6 mm corner radius supports acceptable surface finish in finishing operations, while the coating ensures wear resistance—adjust feeds and speeds accordingly for the best results. Is this insert compatible with standard ENMX toolholders? The ENMX08T316R-F47 WSM35G follows the ENMX form and size conventions and is compatible with holders designed for ENMX‑08 inserts, provided the holder supports the specified negative rake and thickness. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com