GX16-2E325N01-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of robust edge stability, consistent chip control and the Tiger‑tec Silver coating for reliable machining of difficult-to-cut materials; order the insert via Metav Werkzeuge or consult the technical team for application advice. GX16-2E325N01-UF8 WSM23S — Turning indexable insert, coated carbide, Tiger‑tec Silver (Walter Tools) The GX16-2E325N01-UF8 WSM23S is a coated carbide indexable turning insert optimised for heavy machining of rostfreier Stahl and heat‑resistant superalloys, offering stable chip formation and enhanced tool life in demanding turning operations. Tiger‑tec Silver coating technology WSM23S grade for tough materials Stable chip control under high thermal load Robust cutting edge for long tool life Increased productivity through stable cutting performance The Tiger‑tec Silver WSM23S grade combines a wear‑resistant coating with a substrate engineered for demanding turning tasks, delivering consistent chip formation and reduced built‑up edge risk. This results in fewer interruptions for edge changes and a smoother machining rhythm, thereby improving overall throughput. The chipbreaker code 2E325N01‑UF8 supports reliable evacuation during continuous turning, reducing the likelihood of workpiece damage and downtime. Reliable machining of rostfreier Stahl and superalloys Designed specifically for rostfreier Stahl (ISO group M) and high‑temperature alloys (ISO group S), the insert maintains a stable cutting edge even when heat dissipation is limited. The coated carbide composition supports higher cutting parameters without compromising surface integrity, making it suitable for applications where material toughness and thermal stress are critical. For engineers seeking repeatable surface quality, this insert offers predictable wear behaviour and process security. Application benefits and handling notes for shop use The geometrical and material combination of this indexable insert enables efficient turning with fewer machining cycles and a competitive tool life. When paired with an appropriate holder and cutting data adapted to the workpiece, the insert minimises rework and helps meet tight tolerances. Selection of coolant strategy and feed rates should reflect the workpiece material: optimised parameters enhance the long tool life and secure chip control, particularly in continuous production environments. Contact Metav Werkzeuge for application recommendations, cutting data sheets and stock availability for the GX16‑2E325N01‑UF8 WSM23S insert Technical data Article number: GX16-2E325N01-UF8-WSM23S-WALTER Article name: Drehwendeschneidplatte GX16-2E325N01-UF8 WSM23S Walter Tools Brand: Walter Tools Product type: Drehwendeschneidplatte Facts Grade designation: WSM23S Series: Tiger‑tec Silver Chipbreaker: 2E325N01-UF8 Material classification: S / M Special features Coated carbide cutting grade Designed for rostfreier Stahl and high‑temperature alloys Optimised for stable chip formation and edge life Suitable for heavy turning operations FAQ What materials is this insert suited for? The GX16‑2E325N01‑UF8 WSM23S insert is suited for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), offering thermal stability and chip control for these materials. Is the WSM23S grade coated or uncoated? WSM23S is a coated carbide grade within the Tiger‑tec Silver series, designed to enhance wear resistance and cutting edge robustness. Which chipbreaker does the insert use and why does it matter? The insert uses chipbreaker 2E325N01‑UF8, which promotes controlled chip formation and evacuation during turning, reducing the risk of built‑up edge and improving surface finish. Can this insert be used in continuous production? Yes, the combination of Tiger‑tec Silver coating and the WSM23S grade provides consistent edge life and reliable chip control, making the insert suitable for continuous production scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-3E400N04-GD3 WKP23S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WKP23S grade delivers sustained cutting performance and predictable tool life, reducing tool-change frequency and stabilising cycle times. Benefit from the optimised 3E400N04-GD3 chipformer for controlled swarf and consistent surface quality. Order genuine Walter Tools inserts directly via Metav Werkzeuge or request application advice from Metav Werkzeuge consultants. GX16-3E400N04-GD3 WKP23S turning insert — Tiger·tec Silver, for steel & cast iron, Walter Tools The GX16-3E400N04-GD3 WKP23S is a coated carbide turning insert from the Tiger·tec Silver series, engineered for productive turning of steel (P) and cast iron (K) in a wide range of workshop and production environments Tiger·tec Silver coating for long tool life WKP23S grade optimised for steel and cast iron 3E400N04-GD3 chipformer for reliable chip control Enhanced productivity and stable cutting edge Longer, more reliable edge life through advanced coating technology The Tiger·tec Silver series combines a tailored coating stack with a robust base substrate to reduce abrasive and thermal wear during turning. The WKP23S grade, a coated carbide formulation, is tuned for the typical heat and chip formation encountered when machining steel and cast iron, which leads to fewer interruptions for tool changes. With the insert’s enhanced wear resistance, process stability increases and repeatable component tolerances are easier to maintain. This performance translates into lower cost per part in medium- to high-volume production where consistent tool life is essential. Predictable chip behaviour and improved surface finish The integrated 3E400N04-GD3 chipformer is designed to break and guide swarf reliably across a wide cutting parameter window. Stable chip control reduces the risk of surface damage and eases swarf evacuation in turning operations, which helps maintain machine uptime and operator safety. For users unfamiliar with chipformer nomenclature: the code denotes the insert geometry and groove design that actively shapes chips into short, controllable fragments, making finishing passes more consistent and decreasing the need for secondary operations to correct surface irregularities. Broad applicability and process security for production turning Rated for the ISO material groups P and K, this insert supports machining tasks across unalloyed and alloyed steel as well as a variety of cast iron grades. The geometry and grade combination emphasises productivity—allowing higher feed and cutting speeds where appropriate—while retaining a stable cutting edge that preserves dimensional accuracy. For operations seeking reduced variability, the insert’s specification offers an effective balance between aggressive metal removal and predictable tool wear. Selection of this insert is particularly suitable where a single grade must cover multiple component families without frequent requalification. Contact Metav Werkzeuge for tailored cutting data, availability of genuine Walter Tools Tiger·tec Silver inserts and expert advice to optimise turning parameters for specific components Technical data Article number: GX16-3E400N04-GD3-WKP23S-WALTER Label: Drehwendeschneidplatte GX16-3E400N04-GD3 WKP23S Walter Tools Product type: Turning insert Core specifications Series: Tiger·tec Silver Grade: WKP23S Chipformer: 3E400N04-GD3 Material suitability: P (steel), K (cast iron) Special features Coated carbide Optimised chip control geometry Designed for productive turning and stable edge life Manufacturer: Walter Tools FAQ Is this insert suitable for stainless steel applications? The GX16-3E400N04-GD3 WKP23S is specified for ISO groups P (steel) and K (cast iron); stainless steel suitability is not indicated for this grade and a different Walter Tools grade should be selected for reliable machining of stainless materials. What does the WKP23S designation mean in practical terms? WKP23S identifies the Walter Tools coated carbide grade within the Tiger·tec Silver family, optimised for abrasive and thermal conditions typical of steel and cast-iron machining to deliver consistent wear behaviour. How does the 3E400N04-GD3 chipformer affect machining? The 3E400N04-GD3 geometry actively shapes chips into short, controllable fragments to improve swarf evacuation and surface finish during turning, reducing the need for frequent intervention and secondary cleaning steps. Can the insert cover multiple component families without frequent requalification? Yes, the combination of the Tiger·tec Silver coating and the WKP23S grade provides broad coverage for a range of steels and cast irons, supporting process stability across different batches and part types. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter Tools brand is mentioned for clarification of origin. Protected trademarks and trade names belong to their respective owners. The listed article refers to original, factory-new products of the manufacturer.
GX16-3E400N04-GD3 WSM33S WSM33S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM33S grade delivers reliable chip control and extended edge life in demanding materials; this supports continuous, productive turning of stainless steel and superalloys. Order the insert directly via Metav Werkzeuge or request machining advice from their consultants for optimum results. GX16-3E400N04-GD3 WSM33S indexable turning insert – Tiger·tec Silver for stainless steel and superalloys (Walter Tools) GX16-3E400N04-GD3 WSM33S is an indexable turning insert designed for heavy-duty machining of stainless steel and heat‑resistant superalloys, combining a robust chipbreaker geometry with the Tiger·tec Silver coating for improved process stability Tiger·tec Silver coating technology Optimised for stainless steel and superalloys Stable cutting edge for productive machining Chipbreaker 3E400N04-GD3 for controlled chips Maximise machining stability with a coated, grade‑matched insert The combination of Tiger·tec Silver and the WSM33S grade targets the specific challenges of machining stainless steel and high‑temperature alloys. The advanced coating reduces friction and increases thermal resistance, which helps maintain a stable cutting edge under high contact temperatures. For shops focusing on predictable cycle times, this means fewer unscheduled index changes and more consistent component quality. The insert’s design facilitates reliable chip evacuation, lowering the risk of built‑up edge and unplanned interruptions. Improve productivity through controlled chip formation and edge strength The 3E400N04-GD3 chipbreaker geometry is configured to promote short, repeatable chips in demanding workpiece materials. Controlled chip formation reduces the likelihood of entanglement and improves surface finish while enabling safer higher feed rates where the machine and fixture rigidity permit. The tungsten‑carbide substrate combined with the coating increases wear resistance, translating into longer in‑service intervals for the cutting edge and a more economical tool life per component produced. Clear guidance for material groups and machinability The insert is specified for ISO groups M and S: ISO M corresponds to stainless steels, which tend to work‑harden and generate heat; ISO S describes heat‑resistant superalloys and titanium, which stress the cutting edge through poor thermal conductivity. Matching a coated grade like WSM33S to these groups helps to avoid common problems such as rapid flank wear and unstable chip formation. When selecting cutting parameters, consider machine power, rigidity and coolant strategy to exploit the insert’s strengths. Application scenarios and practical benefits on the shop floor Ideal use cases include roughing and medium finishing of shafts, rings and components produced from stainless steel and superalloys on CNC lathes. The insert’s chipbreaker and coating combination supports higher metal removal rates while preserving dimensional stability. Walter’s development focus on edge robustness ensures repeatable performance across batches, reducing setup variation and contributing to predictable throughput in serial production. Contact Metav Werkzeuge for personalised cutting‑parameter recommendations and immediate availability of Walter Tools Tiger·tec Silver inserts – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GX16-3E400N04-GD3-WSM33S-WALTER SKU: GX16-3E400N04-GD3-WSM33S-WALTER Product type: Drehwendeschneidplatte / indexable turning insert Designation: GX16-3E400N04-GD3 WSM33S Grade: WSM33S Series: Tiger‑tec Silver Chipbreaker: 3E400N04-GD3 Facts Material groups: S / M Suitable for stainless steel: yes Special features Coating: Tiger·tec Silver Substrate: coated cemented carbide (WSM33S) Typical application: heavy‑duty turning of stainless steels and superalloys Brand: Walter Tools FAQ What materials is the insert suited for? The GX16-3E400N04-GD3 WSM33S insert is designed primarily for stainless steel (ISO M) and heat‑resistant superalloys (ISO S), providing thermal stability and controlled chip formation. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WSM33S grade reduces friction and increases thermal resistance, which helps to extend edge life and maintain surface quality during demanding turning operations. What role does the 3E400N04-GD3 chipbreaker play? The 3E400N04-GD3 chipbreaker promotes consistent, short chips in difficult‑to‑machine materials, improving safety, surface finish and tool life when used with appropriate cutting parameters. Can the insert be used for finishing as well as roughing? Yes, the insert’s combination of edge strength and coating makes it suitable for roughing and medium finishing of components in stainless steel and superalloys, depending on insert geometry and machine conditions. Is this a genuine Walter Tools product? The item is an original, factory‑new insert from Walter Tools, engineered for stable cutting performance in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
GX16-3E400N04-GD6 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM23S grade for reliable machining of stainless steels and heat‑resistant superalloys; the result is consistent chip control and prolonged tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. GX16-3E400N04-GD6 WSM23S — indexable turning insert by Walter Tools, Tiger·tec Silver coating A GX16-3E400N04-GD6 WSM23S indexable turning insert engineered for secure chip formation when machining stainless steels and high‑temperature alloys. Tiger·tec Silver coating for high wear resistance WSM23S grade for stainless steels and superalloys Stable cutting edge for consistent chip control Compatible with standard GX16 toolholders Reliable performance on demanding materials The insert is designed to deliver process reliability when turning materials that challenge cutting edges. With the WSM23S grade and its Tiger·tec Silver coating, the geometry supports stable chip formation and reduces edge build‑up when machining stainless steels and superalloys. For production environments where interruptions are costly, the combination of thermal stability and wear resistance helps maintain machining parameters over longer tool engagements, lowering the frequency of index changes and keeping cycle times steady. Coating and grade explained for predictable tool life The insert uses a coated carbide substrate enhanced by the Tiger·tec Silver technology. This coating improves resistance to abrasive and adhesive wear and mitigates the effects of elevated cutting temperatures typical of heat‑resistant alloys. In practical terms, the surface treatment supports a reliable contact zone between workpiece and tool, which reduces the tendency for built‑up edge and promotes consistent surface finish. The technical choice of a coated substrate means that, compared with uncoated grades, the component will resist degradation under thermal and mechanical stress for longer periods. Efficient chip control and machining advantages A well‑designed chipformer on the insert enables controlled chip breaking even under variable cutting conditions. The stable cutting edge geometry reduces vibration and stabilises the cutting process, which is particularly beneficial when turning long, slender components or interrupted cuts. Together, the insert’s geometry and material grade help to shorten setup time and simplify parameter selection, contributing to higher first‑pass yields and fewer rework cycles. Compatibility with GX16 toolholders ensures straightforward integration into existing tooling systems. For application consultation or to confirm suitability for a specific alloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the GX16‑series inserts and ordering options Technical data Article number: GX16-3E400N04-GD6-WSM23S-WALTER Product type: Drehwendeschneidplatte Grade: WSM23S Series: Tiger·tec Silver Chipformer: 3E400N04-GD6 Material group: S / M Facts SKU: GX16-3E400N04-GD6-WSM23S-WALTER Special features Coating: Tiger·tec Silver Substrate: coated carbide Application: stainless steels (M) Application: heat‑resistant superalloys and titanium (S) Geometry: stable cutting edge for secure chip control Series family: Tiger‑tec Silver inserts FAQ What materials is this insert designed for? The GX16-3E400N04-GD6 WSM23S insert is formulated for stainless steels and heat‑resistant superalloys, matching the application groups M and S. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver on the WSM23S grade increases wear resistance and thermal endurance, which helps maintain cutting performance and surface finish during extended cuts. Is the insert compatible with standard toolholders? Yes, the insert fits standard GX16 toolholders and integrates easily into existing tool systems for turning operations. Does the insert help with chip control on difficult parts? The combination of grade and chipformer geometry provides consistent chip control, reducing edge build‑up and lowering the risk of interrupted machining issues. Can this grade be used for interrupted cuts or heavy stock removal? WSM23S with its robust edge design supports demanding cutting conditions, offering improved edge stability for interrupted cuts and higher material engagement. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not indicate any affiliation between our company and the mentioned manufacturers. The offered item is an original, factory‑new product of Walter Tools.
GX16-3E400N04-UA4 WKP13S WKP13S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP13S grade and a chipbreaker designed for stable chip formation to keep turning operations productive and reliable; order directly via Metav Werkzeuge or consult our application specialists if further advice is required. GX16-3E400N04-UA4 WKP13S indexable turning insert — Tiger·tec Silver for steel and cast iron, Walter Tools GX16-3E400N04-UA4 WKP13S is an indexable turning insert engineered for productive metalcutting where stable edge life and consistent chip control are essential; the insert is intended for turning applications in steel and cast iron. Tiger·tec Silver coating for wear resistance WKP13S grade for broad material coverage Chipbreaker 3E400N04-UA4 for consistent chips Optimised for productive turning Increased productivity through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP13S cutting grade delivers a marked improvement in wear resistance and service life compared with uncoated grades. Coated carbide provides a thermal barrier and reduced flank wear, which helps to extend tool life under typical turning conditions. For production environments this translates into fewer insert changes and higher machine uptime, supporting a more efficient manufacturing flow without compromising surface quality. Better process security with optimised chip control The integrated chipbreaker 3E400N04-UA4 is designed to produce short, controllable chips when machining a range of steels and cast irons. A chipbreaker is a geometry on the insert face that controls how the swarf breaks and evacuates; optimised chip formation reduces the risk of entanglement, improves coolant access and lowers the chance of workpiece damage. This results in safer, more predictable turning cycles and contributes to reduced cycle-time variability on the shop floor. Broad applicability across steel and cast iron according to ISO groups This insert supports the ISO material groups P (steel) and K (cast iron), making it suitable for unalloyed and alloyed steels as well as a wide range of grey and nodular cast irons. The grade and coating combination is tuned to manage the distinct wear mechanisms of these materials—thermal wear in steels and abrasive wear in many cast irons—so machinists can rely on consistent performance across mixed production batches without frequent grade changes. Seamless integration into productive tool systems The insert is compatible with standard turning toolholders and seatings used for indexable turning inserts, allowing straightforward installation and repeatable positioning. Stable edge geometry and consistent manufacturing tolerances ensure reproducible part quality and simplified tool inventory management. In practice this contributes to predictable tool costs per part and supports lean machining strategies where process security and repeatability are priorities. Contact Metav Werkzeuge for application-specific recommendations and to source Walter Tools Tiger·tec Silver WKP13S inserts; technical advice and supply are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX16-3E400N04-UA4-WKP13S-WALTER Designation: GX16-3E400N04-UA4 WKP13S Product type: indexable turning insert Brand: Walter Tools Core specifications Grade: WKP13S Series: Tiger-tec Silver Chipbreaker: 3E400N04-UA4 Application groups: P (steel), K (cast iron) Special features Cutting material: coated carbide Stable cutting edge and wide material coverage Optimised chipformer for consistent chips Suitable for productive turning operations FAQ What materials can this insert machine effectively? The GX16-3E400N04-UA4 WKP13S indexable turning insert is designed for ISO groups P and K, meaning it is suited to a wide range of steels and cast irons. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP13S grade improves wear resistance and thermal stability, extending insert life and supporting more productive turning cycles. Which chip behaviour is expected with the 3E400N04-UA4 geometry? The 3E400N04-UA4 chipbreaker promotes short, controlled chips that aid evacuation and reduce the risk of entanglement during turning operations. Is this insert compatible with standard toolholders? Yes, the insert is made for standard indexable turning toolholders; correct seating and clamping ensure repeatable results and process security. Can the insert be used for high-volume production? With its combination of coated carbide and the WKP13S grade, the insert is suited to productive turning where consistent tool life and reduced downtime are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; The Walter AG (marketed as Walter Tools) is a leading manufacturer of precision metalcutting tools and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
GX16-3E400N04-UA4 WKP33S WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP33S carbide grade and the dedicated chipbreaker to achieve productive, repeatable turning of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the product specialists for application guidance. GX16-3E400N04-UA4 WKP33S turning indexable insert – Tiger‑tec Silver coated, for steel and cast iron | Walter Tools The GX16-3E400N04-UA4 WKP33S is a turning indexable insert engineered for stable, high‑productivity machining of steel (ISO P) and cast iron (ISO K), featuring a dedicated chipbreaker and the Tiger‑tec Silver coated carbide grade for reliable edge life. Tiger‑tec Silver coating for extended tool life WKP33S coated carbide for robust cutting edge Optimised chip control for stable machining Suitable for steel and cast iron applications Boosted productivity thanks to modern coating and grade The combination of the Tiger‑tec Silver coating with the WKP33S grade delivers measurable process benefits: improved wear resistance and heat management reduce flank and crater wear, which in turn extends tool life and increases uninterrupted cutting time. The insert’s coated carbide substrate is specifically optimised for the thermal and mechanical demands of machining steel, meaning consistent cutting behaviour under elevated temperatures. These material and coating choices translate directly into fewer tool changes and higher machine uptime, supporting a more efficient production flow. Consistent chip formation and reliable cutting edge for repeatable parts Equipped with the 3E400N04‑UA4 chipbreaker geometry, the insert promotes controlled chip formation across typical turning operations in both steel and cast iron. The chip control geometry reduces the risk of long, stringy chips in steels and supports the breaking of short, brittle chips when machining cast iron, improving surface finish and machine safety. The robust cutting edge of this grade maintains dimensional stability over series production, helping to meet repeatability and quality targets in batch turning processes. Practical application guidance and process advantages The insert is suitable for a range of turning operations where balanced performance and reliability are required. As a coated indexable insert for ISO P and K materials, it is particularly effective in semi‑finish and finishing cuts where edge stability and predictable wear rates are important. Selection of correct cutting parameters and toolholder clamping will leverage the WKP33S grade’s strengths; paired with a suitable coolant strategy and stable machine setup, the insert contributes to lower overall machining costs and improved throughput. For materials outside the listed groups, further process evaluation is recommended. Contact Metav Werkzeuge for application advice, process parameters and fast delivery of Walter Tools turning inserts to ensure the GX16‑3E400N04‑UA4 WKP33S fits the specific machining task. Technical data SKU: GX16-3E400N04-UA4-WKP33S-WALTER Product type: turning indexable insert Series: Tiger‑tec Silver Grade: WKP33S Chipbreaker: 3E400N04‑UA4 Key figures No numerical dimensions specified in the provided data Design / Special features Coated carbide grade WKP33S Coating technology: Tiger‑tec Silver Material suitability: Steel (ISO P), Cast iron (ISO K) Insert designation: GX16‑3E400N04‑UA4 Standard ISO designation: GX16‑3E400N04‑UA4 WKP33S Product family: Tiger‑tec Silver Product type label: Drehwendeschneidplatte FAQ What materials is this insert suitable for? The insert is designed for machining steel (ISO P) and cast iron (ISO K) as indicated by the WKP33S grade and Tiger‑tec Silver coating. Which chipbreaker is integrated and what is its benefit? The 3E400N04‑UA4 chipbreaker promotes reliable chip control for both long chips in steels and short, broken chips in cast iron, improving surface quality and machine safety when using the GX16‑3E400N04‑UA4 WKP33S insert. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating enhances heat dissipation and wear resistance of the coated carbide, resulting in longer tool life and more consistent cutting performance for turning operations. Is this insert suitable for finishing and semi‑finishing? Yes, the insert’s combination of grade and chipbreaker is well suited to semi‑finish and finishing cuts where edge stability and reproducible surface quality are required. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany — Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX16-3E400N04-UD4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of a high-productivity cutting solution that combines Tiger·tec Silver coating durability and precise chip control to keep turning processes consistent and economical; order the GX16-3E400N04-UD4 WKP23S insert through Metav Werkzeuge or consult our specialists for application support. GX16-3E400N04-UD4 WKP23S indexable turning insert, Tiger·tec Silver – for steel and cast iron | Walter Tools The GX16-3E400N04-UD4 WKP23S is an indexable turning insert designed for productive machining of steel and cast iron, optimised to deliver stable cutting performance in demanding turning operations. Tiger·tec Silver coating for extended tool life Optimised for steel and cast iron machining Precise chip control via 3E400N04-UD4 chipbreaker Increased uptime through durable coating and grade selection The coated carbide grade WKP23S, part of the Tiger·tec Silver family, is developed for stable performance in demanding turning. Its coating increases resistance to abrasive wear and thermal loading, which directly reduces flank wear and extends time between index changes. The result is improved machine uptime and lower effective tooling cost per component, making the insert a rational choice where throughput and repeatability matter most. Consistent chip control for safer, faster turning The integrated 3E400N04-UD4 chipbreaker geometry promotes controlled chip formation when machining steel and cast iron, reducing the risk of tangled or long chips and improving surface finish consistency. By stabilising chip flow, the insert supports higher practical cutting parameters and shorter cycle times. For shop floors seeking measurable productivity gains, the geometry translates into fewer interruptions and predictable process windows. Practical benefits for diverse workshop applications With suitability for the ISO material groups P (steel) and K (cast iron), this insert covers a wide range of common turning tasks without the need for frequent grade changes. The combination of a robust substrate and a modern coating system means reliable edge integrity across interrupted cuts and mixed production batches. For production and jobbing environments, this versatility reduces tool inventory complexity and simplifies process planning. Application guidance and process reliability When paired with appropriate seat and clamping systems, the insert enables steady cutting forces and repeatable results. The grade’s balance between toughness and wear resistance supports both finishing and medium-roughing operations, depending on the selected feeds and speeds. For engineers and operators less familiar with coated carbide technology, the technical advantage is straightforward: better wear resistance yields longer index life, while effective chip control reduces secondary operations and cleaning time. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Silver inserts and to arrange supply or process consultation. Technical data Article number: GX16-3E400N04-UD4-WKP23S-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N04-UD4 Material compatibility: P / K Facts ISO material groups: P (steel), K (cast iron) Coating technology: Tiger·tec Silver Substrate: coated carbide Geometry designation: GX16-3E400N04-UD4 WKP23S Special features Coated carbide for improved wear resistance Stable chip control for safer turning Suitable for interrupted cuts and mixed batches Designed for productive, repeatable machining FAQ What materials can this insert machine effectively? The GX16-3E400N04-UD4 WKP23S insert is intended for steel and cast iron applications (ISO groups P and K), making it suitable for a broad range of turning tasks. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the Walter Tools grade WKP23S improves abrasion and heat resistance, which extends index life and supports higher process reliability in continuous production runs. What is the role of the 3E400N04-UD4 chipbreaker? The 3E400N04-UD4 chipbreaker is engineered to produce controlled chips during turning, reducing chip-related interruptions and helping to achieve consistent surface quality. Is this insert suitable for interrupted cuts? Yes, the coated carbide substrate and the WKP23S grade are designed to withstand the thermal and mechanical stresses typical of interrupted turning, offering reliable edge integrity. Can this insert replace multiple grades to simplify inventory? Due to its versatility across P and K groups, the insert can reduce the need for a larger range of specialised grades, simplifying tooling choices for mixed production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
GX16-3E400N04-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the WSM33S grade and Tiger‑tec Silver coating to secure stable edge life and optimised chip control for demanding materials; order the inserts directly via Metav Werkzeuge or consult our application specialists for cutting-parameter recommendations. GX16-3E400N04-UD4 WSM33S indexable turning insert – Tiger‑tec Silver grade for stainless steels and superalloys | Walter Tools GX16-3E400N04-UD4 WSM33S is an indexable turning insert intended for heavy-duty machining tasks, especially where stainless steels and heat‑resistant superalloys require secure chip formation and durable edge stability Tiger‑tec Silver coating for thermal stability WSM33S grade for stable cutting edges Optimised chip control for difficult alloys Suitable for stainless steels and titanium High‑performance grade for challenging materials The GX16‑3E400N04‑UD4 WSM33S turning insert combines a coated carbide substrate with Walter Tools’ Tiger‑tec Silver technology to address the specific demands of ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium). The WSM33S grade is engineered to resist thermal loading and edge chipping during interrupted cuts or high cutting temperatures; this results in a more reliable cutting edge and consistent tool life. The chipbreaker geometry 3E400N04‑UD4 promotes controlled chip flow, which reduces rework and improves process stability on the shop floor. Clear productivity gains and surface‑quality benefits Using a dedicated grade and optimised chipbreaker delivers tangible production advantages: longer tool life, fewer tool changes and improved surface finish on hard‑to‑machine workpieces. The Tiger‑tec Silver coating provides thermal protection and wear resistance, while the substrate geometry supports stable contact at the cutting edge. For turning operations in serial production, this insert reduces downtime and contributes to reproducible component quality, making it a pragmatic choice where process reliability and cycle-time reduction are priorities. Practical integration and what to expect in use The insert is compatible with standard indexable turning holders that accept the GX16 form, enabling straightforward replacement and minimal setup time. In practice, the combination of grade and chipbreaker leads to safer chip control and a lower tendency for built‑up edge formation when machining stainless steels and superalloys. For customers evaluating tool life or choosing cutting data, a short trial run under actual operating conditions is recommended to fine‑tune speeds and feeds for the specific material and component geometry. Contact Metav Werkzeuge for tailored cutting data, availability and to secure GX16-3E400N04-UD4 WSM33S inserts from Walter Tools; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: GX16-3E400N04-UD4-WSM33S-WALTER Designation: GX16-3E400N04-UD4 WSM33S Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WSM33S Core data ISO designation: GX16-3E400N04-UD4 WSM33S Chipbreaker: 3E400N04-UD4 Material groups (ISO 513): M, S Special features Coating: Tiger·tec Silver (coated carbide) Suitable for stainless steels Suitable for heat‑resistant superalloys and titanium Optimised chip formation and edge stability Manufacturer: Walter Tools FAQ What materials is this insert designed for? The GX16-3E400N04-UD4 WSM33S insert is designed primarily for ISO group M (stainless steels) and ISO group S (heat‑resistant superalloys and titanium) and offers tailored performance for these materials. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WSM33S grade increases thermal resistance and wear protection, improving edge stability and allowing the insert to maintain performance under elevated cutting temperatures. Which chipbreaker is used and what does it do? The 3E400N04‑UD4 chipbreaker promotes controlled chip flow and secure chip formation, reducing the risk of entangling chips and supporting consistent surface finish during turning operations. Is this insert compatible with standard toolholders? The GX16 form is compatible with turning toolholders designed for that indexable insert geometry; the insert can be integrated into standard turning setups that accept GX16‑type inserts. What production benefits can be expected from using this grade? Using the WSM33S grade typically results in longer tool life, fewer interventions for regrinding or replacement, and improved process stability when machining demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product from Walter Tools.
GX16-3E400N04-UF4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP23S grade for improved wear resistance and consistent chip control in turning operations; the GX16-3E400N04-UF4 WKP23S insert delivers productive machining of Stahl and cast iron and can be ordered directly via Metav Werkzeuge or discussed with their consultants for application-specific advice. GX16-3E400N04-UF4 WKP23S indexable turning insert with Tiger·tec Silver coating — Walter Tools The GX16-3E400N04-UF4 WKP23S is an indexable turning insert designed for productive machining of Stahl and cast iron, combining a Tiger·tec Silver coating with a chipbreaker geometry for reliable material removal in demanding CNC turning applications. Tiger·tec Silver coating technology WKP23S coated carbide grade Optimised for Stahl and cast iron Chipbreaker 3E400N04-UF4 design Durable coating for longer cutting life and stable performance The combination of the Tiger·tec Silver technology and the WKP23S grade creates a coated carbide surface engineered for reduced abrasive wear and thermal load during turning. This results in improved tool life and fewer tool changes, which supports uninterrupted production sequences. Coated carbide means a hard substrate with a wear-resistant surface layer; for workshop planners this translates into predictable performance under the heat and strain typical of machining Stahl and cast iron, with consistent dimensional outcomes and reduced rework. Controlled chips and geometry that reduce cycle interruptions The dedicated chipbreaker 3E400N04-UF4 geometry is designed to control chip formation when cutting both ductile and brittle materials. Effective chip control prevents tangled swarf and minimises the risk of tool or workpiece damage, thereby reducing machine stoppages and handling time. For production managers this geometry offers a measurable advantage: shorter non-cutting times and a smoother material flow from the cutting zone, which supports higher throughput and consistent surface quality on turned components. Wide application range and efficient process integration Specified for ISO groups P / K, the insert covers a broad spectrum from general-purpose Stahl turning to the abrasive conditions of cast iron. The balance between hardness and toughness in the WKP23S grade enables both roughing and finishing passes with limited tooling variants, simplifying inventory and increasing flexibility on the shopfloor. The resulting economic benefit is twofold: lower tooling complexity and a higher ratio of productive machining time to setup time, making this insert a practical choice for job shops and production lines seeking reliable, repeatable results. Contact Metav Werkzeuge for tailored cutting data, batch availability and to discuss how the Walter Tools Tiger·tec Silver inserts can optimise specific turning tasks: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: GX16-3E400N04-UF4-WKP23S-WALTER Product: indexable turning insert Designation: GX16-3E400N04-UF4 WKP23S Brand: Walter Tools Core specifications Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N04-UF4 Material groups (ISO): P / K Special features Coating technology: Tiger·tec Silver Suitable for: Stahl, cast iron Material type: coated carbide Typical use: productive CNC turning operations FAQ What materials is this insert suitable for? The GX16-3E400N04-UF4 WKP23S insert is specified for ISO groups P / K and is suitable for machining Stahl and cast iron. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver coating on the WKP23S grade increases wear resistance and thermal stability, which helps extend tool life and maintain consistent cutting performance. What is the purpose of the 3E400N04-UF4 chipbreaker? The 3E400N04-UF4 chipbreaker is engineered to manage chip formation for both ductile and brittle materials, reducing swarf issues and minimising machine interruptions. Is this insert suitable for finishing operations? Yes, the combination of WKP23S grade and the Tiger·tec Silver coating supports both finishing and productive roughing applications on Stahl and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. The offered article is an original, factory-new product of the manufacturer.
GX16-3E400N04-UF4 WSM33S Wendeplatten - Walter Tools
Die Kombination aus der beschichteten Hartmetall‑Sorte WSM33S und der Tiger·tec Silver‑Technologie sorgt für stabile Schneidkanten und sichere Spanbildung bei rostfreiem Stahl und hitzebeständigen Superlegierungen; daraus folgt eine höhere Prozesssicherheit und längere Standzeit. Bestellen Sie den Einsatz direkt über Metav Werkzeuge oder fragen Sie unsere Berater bei Bedarf. GX16-3E400N04-UF4 WSM33S indexable turning insert – Tiger·tec Silver for stainless steel and superalloys | Walter Tools The GX16-3E400N04-UF4 WSM33S is an indexable turning insert engineered for heavy machining of stainless steel and heat‑resistant superalloys, combining a robust coated carbide grade with a geometry optimised for stable cutting. Tiger·tec Silver coating for heat resistance Optimised chip formation for stable cutting Suitable for stainless steel and superalloys Robust, coated carbide grade WSM33S Better performance on stainless steel and superalloys The coated carbide grade WSM33S, realised within the Tiger·tec Silver series, is tailored to the demands of stainless steel and heat‑resistant alloys. These workpiece groups generate high temperatures and tend to form built‑up edge; the combination of a heat‑resistant coating and a stable substrate reduces adhesion and preserves the cutting edge. As a result, machining cycles run with fewer interrupts for edge dressing and deliver more consistent production output, which supports predictable batch processing and reduced scrap rates. Reliable chip control and improved surface quality The dedicated chipbreaker geometry 3E400N04‑UF4 promotes controlled chip breakage and evacuation even under tougher turning conditions. Controlled swarf management minimises rework and tool collisions while contributing to a consistent surface finish. With optimised chip formation, the insert helps maintain cutting forces within expected ranges, which benefits both tool holders and machine spindle life and supports repeatable part quality in serial turning operations. Longer tool life and lower process variation A coated carbide formulation plus a proven coating system result in enhanced wear resistance and a more robust edge, extending useful life between indexings. This leads to fewer insert changes and reduced downtime. The improved thermal resilience of the coating helps avoid premature flank wear when machining materials that retain heat. In practice, this translates into a clear productivity advantage and a lower cost per component when the insert is used in appropriate cutting windows. Practical integration into machining systems As an indexable turning insert, the item fits standard turning tool holders that accept the GX16 form factor; its designation and geometry are compatible with common clamping systems. The insert’s characteristics make it suitable for applications where secure chip control and edge stability are priorities, such as finishing and semi‑finishing of corrosion‑resistant parts or components made from high‑temperature alloys. For selection of cutting data and holder pairing, consult technical sheets or contact a tooling specialist to match machine and process requirements. Contact Metav Werkzeuge to discuss machining strategies with Tiger·tec Silver and to secure the GX16-3E400N04-UF4 WSM33S indexable turning insert for your production needs Technical Data Article number: GX16-3E400N04-UF4-WSM33S-WALTER Label: Drehwendeschneidplatte GX16-3E400N04-UF4 WSM33S Walter Tools Product type: indexable turning insert Coating: Tiger·tec Silver Grade: WSM33S Chipbreaker: 3E400N04-UF4 Material designation: S / M Manufacturer: Walter Tools Facts Net price (excl. VAT): 26.46 Special features Coated carbide grade optimised for heat resistance Designed for rostfreier Stahl and heat‑resistant superalloys Geometry for controlled chip formation and evacuation Stable cutting edge for reduced edge breakdown Series: Tiger‑tec Silver Application focus: turning, finishing and semi‑finishing FAQ What materials is this insert best suited for? The GX16‑3E400N04‑UF4 WSM33S insert by Walter Tools is designed primarily for stainless steel and heat‑resistant superalloys, addressing the thermal and adhesion challenges these materials pose. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM33S grade increases thermal resistance and wear protection, which helps maintain a stable cutting edge and extends tool life under demanding turning conditions. Which chipbreaker is integrated and what advantage does it bring? The insert uses the 3E400N04‑UF4 chipbreaker, which improves chip control and evacuation, reducing the risk of tangled swarf and supporting a consistent surface finish. Is the insert compatible with standard turning holders? Yes. The GX16 form factor is compatible with standard turning tool holders that accept this indexable insert style; pairing selection should follow holder manufacturer guidelines. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-3E400N04-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Silver coated carbide grade matched to the WSM23S specification and a dedicated 3E400N04‑UF8 chipformer for reliable chip control in stainless steels and heat‑resistant superalloys; this combination promotes consistent tool life and process stability. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. GX16-3E400N04-UF8 WSM23S indexable turning insert — Tiger‑tec Silver, for stainless steels and superalloys (Walter Tools) GX16-3E400N04-UF8 WSM23S is an indexable turning insert engineered for high‑duty applications in ISO M (stainless steels) and ISO S (superalloys and titanium) machining. Tiger‑tec Silver coated carbide grade WSM23S Optimised 3E400N04‑UF8 chipformer for stable chips High edge stability on stainless steels and superalloys Designed for consistent productivity in demanding cuts Increased throughput through robust coating and edge life The combination of a coated carbide substrate and Tiger‑tec Silver technology yields measurable improvements in tool life and process reliability. The selected grade supports a stable cutting edge under elevated temperatures, which reduces unscheduled tool changes and improves overall machine utilisation. Focusing on efficiency, this insert enables longer uninterrupted cuts and helps to lower machining costs per component by extending service intervals and decreasing cycle interruptions. Reliable chip control for difficult materials With the 3E400N04‑UF8 chipformer, the insert delivers predictable chip control when machining tough alloys. The geometry is tuned for ISO M (stainless steels) and S (superalloys/titanium), where heat generation and material ductility challenge conventional grades. Clear chip formation reduces the risk of rework and tool damage, while the insert’s geometry supports stable contact conditions at the cutting edge — a decisive advantage for demanding turning operations on corrosion‑resistant and heat‑resistant materials. Practical handling, compatibility and application gains The insert’s design simplifies tool set‑up and replacement in standard indexable toolholders, contributing to faster tool changes and consistent clamping. Optimised wear behaviour and edge security translate directly into repeatable part quality and surface finish. For workshops seeking predictable performance on stainless steels and superalloys, this solution offers a balance of process stability and cost‑effective machining without sacrificing surface integrity or dimensional control. Contact Metav Werkzeuge today to discuss how the GX16-3E400N04-UF8 WSM23S from Walter Tools can improve component quality and reduce downtime; Metav Werkzeuge is available by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data SKU: GX16-3E400N04-UF8-WSM23S-WALTER Label: Drehwendeschneidplatte GX16-3E400N04-UF8 WSM23S Walter Tools Product type: Indexable turning insert Facts Series: Tiger‑tec Silver Grade: WSM23S Chipformer: 3E400N04‑UF8 Special features Coated carbide grade WSM23S Suitable for stainless steels (ISO M) Suitable for heat‑resistant superalloys and titanium (ISO S) Material group designation: S / M Designed for stable chip control and edge security FAQ Is this insert suitable for stainless steels? Yes. The GX16-3E400N04-UF8 WSM23S is specified for ISO M materials and is optimised to maintain edge stability and chip control when turning stainless steels. Which workpiece materials are recommended for this grade? The WSM23S grade is targeted at stainless steels and heat‑resistant superalloys (ISO M and ISO S), providing balanced wear resistance and thermal stability for demanding cuts. What is the role of the 3E400N04‑UF8 chipformer? The 3E400N04‑UF8 chipformer shapes chips to avoid entanglement and promotes repeatable evacuation, especially under the high heat and ductility conditions typical of stainless and superalloy turning. Can the insert be used in standard indexable toolholders? Yes. The insert is intended for conventional indexable turning toolholders; correct seat and clamping ensure the designed performance and tool life. How does Tiger‑tec Silver benefit production? Tiger‑tec Silver coating enhances thermal resistance and reduces flank and crater wear, which contributes to longer tool life and improved process stability in continuous production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com Protected trademarks and product names are the property of their respective owners. Mark names and trademarks are used solely for identification and explanation; no affiliation between Metav Werkzeuge and the trademark owners is implied.
GX16-3E400N20-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Optimise machining performance for rostfreier Stahl and heat‑resistant superalloys by combining the Tiger‑tec Silver coating with the robust WSM23S grade and the proven 3E400N20‑RF8 chipbreaker for consistent chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult their technical team for tailored application support. GX16-3E400N20-RF8 WSM23S indexable turning insert (Tiger‑tec Silver) — Walter Tools A GX16-3E400N20-RF8 WSM23S indexable turning insert engineered for heavy and heat‑challenging machining of rostfreier Stahl and high‑temperature superalloys. Tiger‑tec Silver coating for heat resistance WSM23S grade for stable cutting edges Optimised 3E400N20‑RF8 chipbreaker Suited to rostfreier Stahl and superalloys Consistent performance through advanced grade and coating The combination of the WSM23S grade and the Tiger‑tec Silver technology delivers enhanced wear resistance and stable cutting edges, making the insert particularly effective when machining materials that generate heat and tend to work‑harden. This engineered pairing reduces the frequency of edge failure and supports longer tool life, which translates directly into fewer interruptions and improved process economy. For operations where repeatability and predictable tool behaviour matter, this insert offers a reliable basis for higher utilisation rates and reduced scrap. Secure chip control for uninterrupted production The 3E400N20‑RF8 chipbreaker is optimised to produce short, controllable chips when turning ductile and heat‑resistant materials, improving evacuation from the cutting zone and lowering the risk of built‑up edge. Improved chip formation not only protects the cutting edge but also contributes to a more consistent surface finish and reduced secondary operations. In practice, this means less downtime for cleaning and lower inspection overheads, supporting smoother production cycles and greater throughput. Built to tackle demanding materials with predictable outcomes Designed for ISO groups M and S, the insert targets rostfreier Stahl and heat‑resistant superalloys, including difficult‑to‑machine nickel‑ and cobalt‑based alloys and titanium, depending on geometry. The coated carbide substrate and coating system focus on thermal stability and edge resilience, allowing for productive material removal rates while maintaining surface integrity. By favouring process security and repeatable performance, the solution supports faster ramp‑up to series production and a measurable reduction in unforeseen tool costs. Practical handling and application guidance The indexable design enables quick seat changes and consistent repositioning of a fresh cutting edge, reducing set‑up time and contributing to predictable cycle times. When integrating this insert into an existing turning process, prioritise rigid clamping and appropriate cutting parameters for rostfreier Stahl or superalloys to exploit the grade’s benefits fully. For customers seeking parameter benchmarks or validation for specific alloys, technical consultancy is available to adapt feeds and speeds for optimal tool life and surface quality. For reliable, high‑temperature turning choose the Tiger‑tec Silver WSM23S grade from Walter Tools and contact Metav Werkzeuge for application advice or supply coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: GX16-3E400N20-RF8-WSM23S-WALTER Designation: GX16-3E400N20-RF8 WSM23S Product type: Indexable turning insert Series: Tiger‑tec Silver Facts Grade: WSM23S Chipbreaker: 3E400N20‑RF8 Material suitability: ISO groups M, S Manufacturer: Walter Tools Special features Coating technology: Tiger‑tec Silver Substrate: coated carbide Application focus: rostfreier Stahl and heat‑resistant superalloys Optimised chip control for improved surface quality FAQ What materials is this insert suitable for? The GX16-3E400N20-RF8 WSM23S insert is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and stable cutting edges for these demanding materials. How does the 3E400N20‑RF8 chipbreaker improve machining? The 3E400N20‑RF8 chipbreaker promotes short, controllable chips and consistent chip evacuation, which protects the cutting edge of the insert and helps to maintain a reliable surface finish during longer runs. Is the WSM23S grade suitable for high material removal rates? Yes, the WSM23S grade combined with Tiger‑tec Silver technology is designed to support productive cutting conditions while preserving edge life, enabling efficient material removal in challenging applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and there is no association or affiliation between our company and the referenced brands. The described article is an original, factory‑new product of the manufacturer Walter Tools.
GX16-3E425N02-UF8 WSM23S Wendeplatten - Walter Tools
High thermal stability and optimised chip control deliver consistent cutting performance while reducing downtime; combined with the wear-resistant Tiger‑tec Silver grade WSM23S, this insert supports reliable machining of stainless steels and superalloys — order the GX16-3E425N02-UF8 WSM23S insert directly via Metav Werkzeuge or contact the technical consultants for application advice. GX16-3E425N02-UF8 WSM23S indexable turning insert – Tiger‑tec Silver for stainless steels & superalloys (Walter Tools) GX16-3E425N02-UF8 WSM23S is a coated indexable turning insert engineered for demanding turning tasks in rostfreie Stähle and heat-resistant superalloys, delivering stable edges and predictable chip formation Tiger‑tec Silver coated carbide Optimised chipbreaker for stainless steels High edge stability on superalloys Consistent performance in rostfreie Stähle and superalloys The WSM23S grade, part of the Tiger‑tec Silver series, is a coated carbide developed for materials that challenge conventional tooling. Its chemistry and coating architecture promote thermal stability and reduce tendency to built-up edge when machining stainless steels (ISO group M) and heat-resistant alloys (ISO group S). For production environments where repeatable results matter, the combination of substrate and coating supports predictable tool life and fewer unexpected interruptions. Reliable chip control and robust cutting edge The integrated chipbreaker 3E425N02‑UF8 is tailored to enhance chip control on tough-to-machine materials, producing short, controllable chips and lowering re-cutting risk. Coating plus geometry ensure edge stability under elevated temperatures, while the concept of a coated grade means a thin, wear-resistant layer protects the substrate and delays flank wear. For operations that demand surface integrity and tool-change predictability, the engineered chip former brings measurable process benefits. Productivity gains through process reliability Designed for industrial turning applications, the geometry and grade deliver a balance between productivity and secure cutting behaviour. Reduced downtime and fewer tool changes translate into better throughput, especially in batch production or long single-piece runs. Backed by Walter Tools’ experience in precision cutting solutions, the insert supports stable machining strategies and contributes to lower unit costs through reliable performance and extended edge life. Contact Metav Werkzeuge for tailored application recommendations and to secure GX16-3E425N02-UF8 WSM23S inserts from Walter Tools; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX16-3E425N02-UF8-WSM23S-WALTER Designation: GX16-3E425N02-UF8 WSM23S Type: Indexable turning insert Series: Tiger‑tec Silver Grade: WSM23S Chipbreaker: 3E425N02-UF8 Material code: S / M Manufacturer: Walter Tools Core specifications ISO groups: M, S Suitable for: stainless steels, heat‑resistant superalloys, titanium (dependant on geometry) Coating technology: Tiger‑tec Silver Special features Coated carbide grade WSM23S Optimised chip formation High edge stability Designed for heavy-duty turning GX16 insert geometry FAQ Which materials is this insert suitable for? The GX16-3E425N02-UF8 WSM23S insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), depending on insert geometry. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver on the WSM23S grade offers enhanced thermal resistance and improved wear behaviour, extending usable edge life in demanding turning applications. How does the 3E425N02‑UF8 chipbreaker affect machining? The 3E425N02‑UF8 chipbreaker delivers controlled, short chips and reduces re-cutting, improving process stability when turning tough materials. Is this insert suitable for interrupted cuts? Yes; the combination of a wear‑resistant coating and a stable geometry makes the insert appropriate for applications with occasional interruptions, offering good edge resilience. Which toolholder interfaces accept the GX16 series? The GX16 designation indicates compatibility with the matching GX16 toolholder family; selection should follow the holder manufacturer’s specifications for seat and clamp. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-1E200N02-CE4 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Silver coating and the WSM23S carbide grade for stable cutting performance and predictable tool life; the result is efficient machining of stainless steel and heat‑resistant alloys with reduced rework. Order the insert directly via Metav Werkzeuge or contact the consultants for process-specific recommendations. GX24-1E200N02-CE4 WSM23S indexable turning insert – Tiger·tec Silver, for stainless steel and superalloys (Walter Tools) The GX24-1E200N02-CE4 WSM23S is an indexable turning insert engineered for heavy‑duty and difficult‑to‑machine materials, offering a balance of edge stability and optimised chip control for production environments. Tiger·tec Silver coating technology Optimised chip control geometry High edge stability for tough materials Walter Tools consistency and wear life Increase throughput with proven coating and grade The combination of Tiger·tec Silver coating and the WSM23S coated carbide grade delivers thermal resistance and wear protection where it matters most. This results in consistent wear life and fewer unscheduled tool changes, which supports higher machine utilisation and lower cost per part. The coating technology reduces adhesion and built-up edge on challenging surfaces, translating into smoother production runs and more predictable maintenance intervals. Minimise interruptions through controlled chip formation The insert’s 1E200N02-CE4 chipbreaker geometry is designed for reliable chip segmentation and evacuation under high thermal loads. Stable chip control reduces the risk of chip jamming and improves surface finish consistency, which in turn lowers scrap rates. For machining processes where interrupted cuts or complex toolpaths occur, the optimised chipformer maintains process stability and reduces cycle time variance. Confidently tackle stainless steel and high‑temperature alloys Specified for material groups M and S according to ISO 513, this grade addresses the typical challenges of stainless steel and heat‑resistant superalloys, such as toughness, work hardening and poor heat conductivity. The insert’s combination of substrate and coating helps to prevent premature wear and supports stable cutting edge behaviour, which is particularly valuable when reproducible part quality and dimensional consistency are required in serial production. Durable performance that reduces total operating costs A coated carbide construction provides a durable cutting edge and dependable performance over extended runs. The design focus on edge stability and optimised coating means fewer changeovers and a lower frequency of insert replacements, improving overall tool economy. When productivity and repeatability are priorities, the insert’s wear characteristics lead to predictable tool life and simplified tooling logistics. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to discuss cutting trials or procurement of the GX24-1E200N02-CE4 WSM23S for specific stainless steel or superalloy requirements Technical data SKU: GX24-1E200N02-CE4-WSM23S-WALTER Product type: indexable turning insert Series: Tiger·tec Silver Grade: WSM23S Manufacturer: Walter Tools Numbers / Core technical data Material groups: S / M Applicable ISO group: M, S Chipbreaker: 1E200N02-CE4 Special features Coated carbide cutting grade Tiger·tec Silver coating technology Optimised chipformer for stable chip control Designed for stainless steel and heat‑resistant superalloys High edge stability for demanding machining FAQ What materials is this insert designed to machine? The GX24-1E200N02-CE4 WSM23S insert is specified for machining stainless steel and heat‑resistant superalloys (ISO groups M and S), offering thermal resistance and edge stability for these difficult materials. Which chipbreaker does the insert use and what is the benefit? The insert features the 1E200N02-CE4 chipbreaker, which promotes reliable chip segmentation and evacuation to reduce stoppages and improve surface quality during tough cutting conditions. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WSM23S grade enhances thermal protection and wear resistance, resulting in more predictable wear life and fewer insert changes over long production runs. Is this insert suitable for interrupted cuts or roughing operations? Yes, the combination of edge stability and the optimised chipformer makes the insert suitable for interrupted cuts and demanding roughing operations in stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
GX24-1E200N02-CE4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and suitability for demanding materials to increase uptime and part quality; order the GX24-1E200N02-CE4 WSM33S insert directly via Metav Werkzeuge or consult the team for application advice. GX24-1E200N02-CE4 WSM33S turning indexable insert — Tiger·tec Silver, for stainless steels and superalloys (Walter Tools) The GX24-1E200N02-CE4 WSM33S is a premium indexable turning insert designed for heavy-duty machining of stainless steels and temperature-resistant superalloys, offering a balance of wear resistance and edge stability. Tiger·tec Silver coating technology Optimised chip control geometry 1E200N02-CE4 Suitable for stainless steels (ISO M) and superalloys (ISO S) High edge stability for heavy-duty operations Outstanding wear resistance for demanding materials The GX24-1E200N02-CE4 WSM33S is based on coated cemented carbide within the Tiger·tec Silver family, engineered to deliver extended tool life when machining materials that generate heat and tend to build up on the cutting edge. The chosen grade, WSM33S, combines a robust substrate with a specialised coating to resist abrasion and maintain a sharp cutting edge under thermal stress. For operations on stainless steels (ISO M) and superalloys/titanium (ISO S) the insert’s material composition helps to reduce flank wear and delay edge breakdown, resulting in fewer indexings and more consistent part tolerances. Predictable chip control and improved surface quality The integrated chipbreaker 1E200N02-CE4 is designed for controlled chip formation in demanding turning tasks; this geometry reduces the risk of long, stringy chips and minimises built-up edge, which in turn supports a more consistent surface finish. Controlled chips also help to reduce secondary operations and machine interruptions, contributing to a steadier process flow. In practical terms, predictable chip behaviour leads to fewer rejects and less time spent on manual chip handling, improving both productivity and workplace safety. Process stability that supports productivity By prioritising edge stability and a coating system tuned for heat resistance, this indexable insert offers greater process reliability in challenging cuts. Stable cutting performance reduces vibration and improves dimensional repeatability, which is particularly valuable in batch production and precision turning. The insert is compatible with common turning toolholders, allowing straightforward integration into existing setups and simplifying tool management in the workshop. Clear advantages for shop-floor efficiency Using an insert with the WSM33S grade and Tiger·tec Silver technology can reduce tool change frequency and contribute to lower overall tooling costs per component. The combination of coating and chipbreaker means less downtime for regrinding or replacement and a more consistent cycle time. For production planners and machinists, the benefit is measurable: longer tool life, fewer interventions and more predictable throughput. Contact Metav Werkzeuge for tailored tooling recommendations or to request a quote for the Walter Tools GX24-1E200N02-CE4 WSM33S insert — expert application support is available to match the insert to material and cutting conditions Technical data SKU: GX24-1E200N02-CE4-WSM33S-WALTER Designation: GX24-1E200N02-CE4 WSM33S Product type: Turning indexable insert Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 1E200N02-CE4 Material group: S / M Manufacturer: Walter Tools Facts SKU identifier: GX24-1E200N02-CE4-WSM33S-WALTER Series name: Tiger·tec Silver Grade code: WSM33S Special features Coated cemented carbide grade (Tiger·tec Silver) Optimised chip former for stable chips Suited for stainless steels (ISO M) Suited for superalloys and titanium (ISO S) Designed for high edge stability and process reliability FAQ What materials is this insert designed to machine? The GX24-1E200N02-CE4 WSM33S insert is designed primarily for stainless steels (ISO M) and superalloys/titanium (ISO S), where heat resistance and edge stability are critical. How does the Tiger·tec Silver technology benefit machining? Tiger·tec Silver coating on the WSM33S grade enhances wear resistance and temperature tolerance, which helps maintain edge sharpness and extends tool life under demanding cutting conditions. What is the role of the 1E200N02-CE4 chipbreaker? The 1E200N02-CE4 chipbreaker delivers controlled chip formation to reduce built-up edge and improve surface finish, promoting process stability and fewer machine interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-1E200N02-CE4 WSM43S WSM43S Wendeplatten - Walter Tools
The combination of a high‑temperature resistant grade and a stable cutting geometry ensures consistent chip control and extended edge life; the result is efficient machining of stainless steels and superalloys with reduced rework. Order the insert directly via Metav Werkzeuge or consult their specialists for process integration. GX24-1E200N02-CE4 WSM43S indexable turning insert – Tiger·tec Silver, for stainless steels and superalloys | Walter Tools The GX24-1E200N02-CE4 WSM43S is an indexable turning insert designed for heavy machining of stainless steels and heat‑resistant superalloys, offering a coated carbide grade optimised for secure chip formation and long tool life *High thermal stability Tiger·tec Silver coating *Suitable for stainless steels and superalloys *Stable cutting geometry 1E200N02-CE4 *Robust WSM43S grade for demanding turning Reliable performance where heat and adhesion challenge productivity The combination of Tiger·tec Silver technology and a coated carbide substrate provides thermal resilience and wear protection during continuous cutting. This results in a stable cutting edge that reduces the risk of built‑up edge (BUE) when machining tough materials. For production environments that demand reproducible component tolerances, the coated grade supports predictable tool life and lowers scrap rates. The geometry 1E200N02‑CE4 is engineered to promote controlled chip flow, helping to avoid chip jamming and maintain cycle times. Optimised for stainless steels and heat‑resistant alloys Designed for the machining categories M and S according to ISO classification, the insert excels on stainless steels and heat‑resistant superalloys where poor thermal conductivity and work‑hardening can cause rapid wear. The WSM43S grade balances hardness and toughness to withstand the mechanical and thermal loads typical of such materials. By choosing this insert, workshops benefit from fewer tool changes and more predictable machining parameters, which supports higher overall productivity and consistent surface finishes. Practical advantages for production and jobbing shops The insert's indexed format allows simple seat replacement without regrinding, enabling fast insert changes and minimal machine downtime. The GX24‑1E200N02‑CE4 geometry helps to maintain stable cutting forces and improves component surface integrity, reducing secondary operations. For users transitioning from less robust grades, this option delivers immediate process reliability improvements, particularly in interrupted cuts or when machining challenging batches. How the insert supports process security and cost efficiency Using a dedicated grade for demanding alloys reduces unexpected tool failures and the associated unplanned stoppages. The insert’s coating and grade combination lowers flank wear progression and supports longer edge life, which can translate into lower tooling costs per part. Process engineers will appreciate the reproducible behaviour under elevated temperatures, allowing programming of feeds and speeds with confidence and fewer trial cuts. Contact Metav Werkzeuge for a tailored recommendation on integrating the GX24-1E200N02-CE4 WSM43S insert into existing turning operations; Metav Werkzeuge provides application support and can advise on cutting data and toolholders Technical Data Article number: GX24-1E200N02-CE4-WSM43S-WALTER Designation: GX24-1E200N02-CE4 WSM43S Product type: Indexable turning insert Facts Applicable materials: M (stainless steels), S (superalloys, titanium) Grade/coating: Tiger·tec Silver (coated carbide) Geometry: 1E200N02-CE4 Special features Brand: Walter Tools Series: Tiger·tec Silver Sort: WSM43S – coated carbide grade for demanding materials FAQ What materials is this insert intended for? The insert is designed for machining stainless steels and heat‑resistant superalloys (ISO groups M and S); the WSM43S grade and Tiger·tec Silver coating are selected for these applications. How does the 1E200N02‑CE4 geometry affect chip control? The 1E200N02‑CE4 geometry promotes secure chip formation and controlled chip flow, which reduces chip interference and supports consistent cutting forces during turning with the Walter Tools insert. Can this insert be used for interrupted cuts? Yes, the WSM43S grade offers a balance of toughness and wear resistance that performs reliably in interrupted cuts and under variable cutting conditions. Where can cutting data and application advice be obtained? Cutting data and process guidance for the GX24‑1E200N02‑CE4 WSM43S insert are available from Metav Werkzeuge; their specialists can advise on feed, speed and toolholder selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-1E200N02-CF5 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM23S grade and a robust chipbreaker geometry for reliable performance when machining stainless steels and heat‑resistant alloys; order genuine inserts via Metav Werkzeuge or consult the technical team for machining recommendations. GX24-1E200N02-CF5 WSM23S Drehwendeschneidplatte by Walter Tools — coated carbide for stainless steel and superalloy turning A GX24-1E200N02-CF5 WSM23S turning insert engineered for productive, stable machining of rostfreiem Stahl and heat‑resistant superalloys in finishing and roughing applications Tiger‑tec Silver coating for high‑temperature stability WSM23S grade for stainless steel and superalloys Stable cutting edge and reliable chip control Designed for heavy‑duty turning operations High process reliability through advanced coating technology The Tiger‑tec Silver coating provides enhanced thermal resistance and a consistently stable cutting edge, which translates into longer tool life and fewer interruptions on the shop floor. For machining stainless steels and nickel‑based alloys, the coated carbide chemistry of the grade ensures controlled adhesion behaviour and reduced tendency for built‑up edge. This leads to steadier surface finishes and improved cycle‑time predictability. Optimised chip formation for repeatable productivity The integrated chipbreaker geometry (1E200N02‑CF5) promotes predictable chip control under demanding heat‑generation conditions. Stable chip flow reduces rework and machine downtime, especially in medium to heavy cuts. The geometry is tuned to support continuous production and simplifies chip evacuation when processing materials that tend to produce stringy or tough chips. Grade selection tailored for difficult‑to‑machine materials The WSM23S grade is a coated carbide formulation designed for S and M ISO groups—heat‑resistant superalloys, titanium and rostfreiem Stahl. Its balance between hardness and fracture resistance provides a reliable compromise: adequate wear resistance at elevated temperatures while maintaining edge stability under intermittent cutting forces, making the grade suitable for mixed production runs. Operational benefits: fewer tool changes, consistent quality By combining coating, substrate and chipbreaker design, the insert reduces frequency of tool changes and supports consistent dimensional and surface quality across batches. This results in lower handling times and contributes to process cost reductions over the production cycle without compromising component tolerances or finish. Practical machining guidance for setup and feeds For best results with rostfreiem Stahl and nickel alloys, adapt cutting parameters to maintain stable temperatures and avoid excessive build‑up. The insert’s performance is maximised when coolant strategy and feed per revolution are aligned with wall thickness and part rigidity. The combination of Tiger‑tec Silver and the WSM23S grade provides robustness where thermal peaks occur. Compatibility and application scope The insert is designed for a broad range of turning operations, from roughing to finishing, when machining materials that challenge cutting edges. Its strengths are most evident in sustained production environments that demand repeatable results and low variance in tool life, especially on components requiring tight surface quality. Why this choice supports production goals Selecting a coated carbide insert with a proven grade and chipbreaker brings tangible benefits: improved uptime, predictable tool life and enhanced surface consistency. For manufacturing processes that prioritise throughput and quality, the combination of coating technology and geometry plays a decisive role in achieving stable, economic machining. Order genuine Walter Tools Tiger‑tec Silver inserts through Metav Werkzeuge for enhanced process security and tailored application support; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for machining advice and availability. Technical data Article number: GX24-1E200N02-CF5-WSM23S-WALTER Product type: Drehwendeschneidplatte Designation: GX24-1E200N02-CF5 WSM23S Series: Tiger‑tec Silver Grade: WSM23S Core data Material group: S / M Chipbreaker: 1E200N02-CF5 Special features Coated carbide (Tiger‑tec Silver) Suitable for rostfreiem Stahl and heat‑resistant superalloys Stable chip formation and cutting edge Brand: Walter Tools FAQ What materials is this insert suited for? The GX24-1E200N02-CF5 WSM23S insert is formulated for rostfreiem Stahl and heat‑resistant superalloys (ISO groups S and M), offering thermal stability and edge robustness for these materials. Which coating technology does the insert use and why does it matter? The insert features the Tiger‑tec Silver coating; this improves heat resistance and reduces adhesion, extending effective tool life under high thermal load. How does the chipbreaker geometry affect production? The 1E200N02‑CF5 chipbreaker supports predictable chip control and reduced rework, which helps to maintain steady production rates and consistent surface quality. Is this product a genuine Walter Tools item? Yes, the article is offered as an original, brand‑new Walter Tools turning insert (GX24-1E200N02-CF5 WSM23S). Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
GX24-1E200N02-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM33S grade for stable edge life and reliable chip control when machining stainless steels and heat‑resistant superalloys; order the GX24-1E200N02-CF5 WSM33S directly via Metav Werkzeuge or ask our consultants if needed GX24-1E200N02-CF5 WSM33S indexable turning insert, Tiger·tec Silver — Walter Tools The GX24-1E200N02-CF5 WSM33S is a coated indexable turning insert engineered for heavy-duty and high-temperature applications, especially machining stainless steels and heat‑resistant superalloys Tiger·tec Silver coating for edge stability Optimised chip control for difficult materials Suited to stainless steels and superalloys Robust grade WSM33S for extended tool life Reliable edge life for demanding materials The combination of the WSM33S grade and Tiger·tec Silver coating delivers a balance of wear resistance and thermal stability that supports consistent cutting performance when machining stainless steels and heat‑resistant superalloys. The coated carbide substrate reduces the tendency for edge build-up and improves resistance to the elevated temperatures typical of these materials, which in turn helps maintain dimensional accuracy over longer tool cycles. This results in fewer indexing operations and more predictable productivity in series production or jobbing work where process stability is critical. Controlled chip formation and predictable machining results With the 1E200N02-CF5 chipbreaker geometry, the insert provides controlled chip formation across a variety of cutting conditions. The chipbreaker is designed to support secure chip evacuation while reducing cutting forces and vibration, which benefits surface finish and tool life. In practical terms, the insert helps to avoid entangling long swarf and supports a stable cutting zone when turning tough, heat‑generating workpiece materials. The result is fewer interruptions on the machine and more consistent parts per shift. Application focus and shopfloor advantages This insert is intended for operations on ISO groups M and S — namely stainless steels and superalloys/titanium — where material toughness and poor thermal conductivity demand a robust grade and coated surface. Choosing this geometry and grade combination supports higher metal‑removal rates without compromising component quality, while the coating contributes to repeatable performance under thermal stress. For workshops seeking to enhance process reliability, the insert represents a practical option that reduces rework and increases throughput. For tailored application advice and availability of the Tiger·tec Silver inserts, contact Metav Werkzeuge for technical support and ordering assistance Technical data SKU: GX24-1E200N02-CF5-WSM33S-WALTER Designation: GX24-1E200N02-CF5 WSM33S Product type: Indexable turning insert (Drehwendeschneidplatte) Facts Material group: S / M Special features Coating: Tiger·tec Silver Grade: WSM33S (coated carbide) Chipbreaker: 1E200N02-CF5 Suitable for: stainless steels (ISO M), heat‑resistant superalloys and titanium (ISO S) Series: Tiger‑tec Silver Manufacturer: Walter Tools FAQ What materials is this insert intended for? The GX24-1E200N02-CF5 WSM33S insert is designed primarily for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S). How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM33S grade increases thermal stability and wear resistance, helping to preserve the cutting edge during high‑temperature cuts. Which chipbreaker is fitted and what is its advantage? The insert features the 1E200N02‑CF5 chipbreaker, which optimises chip control and evacuation for turning operations on difficult materials, reducing interruptions and improving surface finish. Is this insert suitable for high‑feed or heavy roughing operations? The robust WSM33S grade and chipbreaker geometry make this insert well suited to demanding roughing and higher material‑removal rate applications on tough alloys. Who manufactures this insert and how does the brand influence quality? The insert is from Walter Tools; the brand is associated with precision tooling and process reliability, supporting repeatable results in production environments. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
GX24-1E200N02-CF5 WSM43S WSM43S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM43S grade for reliable machining of stainless steels and heat‑resistant alloys; the optimised chipformer promotes stable chip control and longer tool life. Order the insert directly via Metav Werkzeuge or consult the specialists for application support. GX24-1E200N02-CF5 WSM43S — Indexable turning insert, Tiger‑tec Silver, Walter Tools The GX24-1E200N02-CF5 WSM43S is an indexable turning insert engineered for heavy and difficult‑to‑machine materials, principally stainless steels and high‑temperature superalloys, where chip control and cutting‑edge stability are decisive. Tiger‑tec Silver coating technology Optimised chip control for tough alloys Suitable for stainless steels and superalloys Robust cutting‑edge stability under heat Boosted productivity when machining stainless steels and superalloys The coated carbide grade WSM43S from the Tiger‑tec Silver series offers a balance between thermal resistance and edge strength that translates into fewer interruptions and steadier cycle times. By combining a heat‑resistant coating with a stable substrate, the insert reduces the risk of built‑up edge and premature flank wear, which means more consistent part quality and less rework. For shops processing corrosion‑resistant materials and heat‑resistant components, this results in measurable throughput gains and predictable performance under demanding conditions. More reliable chip control reduces secondary operations The specified chipformer geometry 1E200N02‑CF5 has been developed to promote secure chip formation even when cutting sticky or gummy alloys. Controlled chip breakage prevents entanglement and eases evacuation from the cutting zone, lowering the likelihood of surface damage and the need for manual cleaning. In practice, improved chip behaviour shortens non‑productive time and supports smoother machine operation, which benefits batch runs and single‑piece flows alike. Clear benefits from a well‑matched coating and substrate As a coated carbide solution, the insert combines a thin, wear‑resistant coating with a tough core substrate. This pairing is intended to withstand the thermal and mechanical stresses typical for machining stainless steels and Superalloys, offering a compromise between sliding wear protection and fracture resistance. For users unfamiliar with coating technologies: the coating reduces adhesion and abrasion at the cutting zone, while the substrate maintains a durable cutting edge under intermittent loads. Contact Metav Werkzeuge today to discuss the optimal geometry and grade for the intended application with Walter Tools inserts and to request specification data for series Tiger‑tec Silver Technical Data Article number: GX24-1E200N02-CF5-WSM43S-WALTER Name: Drehwendeschneidplatte GX24-1E200N02-CF5 WSM43S Walter Tools Type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Facts Series: Tiger‑tec Silver Grade: WSM43S Geometry: 1E200N02‑CF5 Material group designation: S / M Special features Coated carbide (coating technology Tiger‑tec Silver) Optimised chipformer for stable chip control Intended use: stainless steels and heat‑resistant superalloys Insert designation: GX24‑1E200N02‑CF5 FAQ Which materials is this insert suitable for? The GX24-1E200N02-CF5 WSM43S insert is designed primarily for stainless steels and heat‑resistant superalloys (material groups S and M), where thermal resistance and chip control are critical. What does the Tiger‑tec Silver series provide? Tiger‑tec Silver denotes a wear‑resistant coating technology combined with a robust substrate; in the WSM43S grade it supports improved thermal stability and longer cutting‑edge life for demanding materials. How does the chipformer designation affect performance? The 1E200N02‑CF5 chipformer geometry promotes controlled chip segmentation and evacuation, which reduces the risk of entanglement and surface damage during turning operations. Is this insert suitable for finishing operations on stainless steel? Depending on the tool setup and parameters, the coated WSM43S grade can deliver consistent edge stability and surface integrity suitable for many finishing tasks on corrosion‑resistant steels. Can the insert handle interrupted cuts or heavy depths of cut? The combination of a tough substrate and the Tiger‑tec Silver coating increases resistance to mechanical shock and thermal loads, making the insert a robust option for applications that include intermittent engagement or more aggressive machining strategies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for identification purposes; there is no affiliation implied. The listed article is original, factory‑new merchandise of the manufacturer.
GX24-1E200N02-CF6 WSM33S WSM33S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating and the WSM33S grade provides enhanced thermal stability and a robust cutting edge for demanding turning operations, resulting in reliable chip control and increased productivity; order the insert directly via Metav Werkzeuge or consult the advisors for application support. GX24-1E200N02-CF6 WSM33S — Turning insert, Tiger-tec Silver by Walter Tools The GX24-1E200N02-CF6 WSM33S is a coated carbide turning insert designed for heavy-duty machining of rostfreier Stahl and stainless steel in industrial turning applications. Tiger·tec Silver coating for thermal stability WSM33S grade for tough, heat-resistant materials Stable cutting edge for secure chip control Suitable for rostfreier Stahl and superalloys Increased process output through reliable edge life The insert is built on a coated carbide substrate and the combination of the Tiger·tec Silver technology with the WSM33S grade reduces flank wear and resists high cutting temperatures. This translates into longer tool life and fewer index changes on the turret, which directly supports higher machine uptime and a better cost-per-part ratio in series production. The construction prioritises a stable cutting edge, so dimensional consistency is maintained even under thermally demanding conditions. Secure chip formation and consistent surface quality Optimised for materials that tend to work-harden and generate heat, the geometry linked to the 1E200N02-CF6 breaker supports controlled chip segmentation and evacuation. For rostfreier Stahl and nickel‑based alloys, predictable chip behaviour reduces the risk of built-up edge and rework. The result is improved repeatability and a consistent surface finish that meets tight tolerances in precision turning, while reducing cycle‑time variability across batches. Coating benefits that support higher cutting speeds The Tiger·tec Silver coating offers enhanced thermal resistance and lubricity compared with conventional coatings, enabling safer operation at elevated cutting speeds. Thermal stability contributes to secure chip control and preserves the micro‑geometry of the cutting zone, which means fewer interruptions for regrinding or replacement. For production environments focusing on throughput, this coating technology supports a clear efficiency uplift without sacrificing component quality. Practical integration and operational advantages As an indexable turning solution, the insert fits established toolholders and is straightforward to implement within existing turning processes. Its specification suits workshops that machine demanding alloys and rostfreier Stahl, delivering both process security and predictable tool life. Detailed application testing and recommendation support are available to align cutting data with machine capabilities, helping to shorten ramp‑up time for new production runs. Contact Metav Werkzeuge today for application guidance on the Walter Tools Tiger‑tec Silver GX24-1E200N02-CF6 WSM33S insert and to confirm availability and delivery options; Metav Werkzeuge can provide cutting data and consultation by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: GX24-1E200N02-CF6-WSM33S-WALTER Name: Drehwendeschneidplatte GX24-1E200N02-CF6 WSM33S Type: Turning insert Series: Tiger-tec Silver Grade: WSM33S Facts Material designation: S / M Geometry / chipbreaker: 1E200N02-CF6 Suitability: rostfreier Stahl — yes Special features Coating: Tiger·tec Silver Substrate: coated carbide Applications: heavy‑duty turning, heat‑resistant superalloys Manufacturer: Walter Tools FAQ What materials is this insert suited for? The GX24-1E200N02-CF6 WSM33S insert is designed for machining rostfreier Stahl and heat‑resistant superalloys (material groups S and M). How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating raises thermal stability and lubricity at the cutting edge, which enhances tool life and allows safer operation at higher cutting speeds with the WSM33S grade. Is the chipbreaker geometry suitable for long, stringy chips? The 1E200N02-CF6 chipbreaker is engineered to support controlled chip segmentation and evacuation, improving chip control in rostfreier Stahl and difficult alloys. Can this insert be used in existing toolholders? Yes, the indexable turning design is compatible with standard toolholders for inserts of the specified geometry; check holder compatibility with the GX24-1E200N02-CF6 designation. Who supplies technical support and cutting data? Metav Werkzeuge provides application consultation and cutting data for the Walter Tools Tiger‑tec Silver insert to support process integration. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no association between our company and the named brands. The offered item is original, factory‑new.
GX24-1E239N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM23S grade ensures reliable edge stability and consistent chip control when machining demanding materials; benefit from high process security, repeatable performance and long tool life by integrating this insert into production. Order the GX24-1E239N02-UF8 WSM23S turning insert directly via Metav Werkzeuge or ask our consultants for application support. GX24-1E239N02-UF8 WSM23S turning insert — Tiger·tec Silver, for rostfreier Stahl and superalloys by Walter Tools The GX24-1E239N02-UF8 WSM23S is a coated carbide turning insert designed for heavy-duty and heat-loaded machining of rostfreier Stahl and heat‑resistant superalloys, offering stable cutting edges and optimised chip formation. Tiger·tec Silver coating for high wear resistance Optimised chipformer 1E239N02-UF8 Tailored for rostfreier Stahl and superalloys Consistent edge stability under thermal load Increase throughput with a specialist coated grade The combination of the WSM23S grade and the Tiger·tec Silver technology delivers a coating system engineered for elevated thermal stability and wear resistance. For shops processing rostfreier Stahl or high-temperature alloys, this translates into reduced flank wear and longer intervals between index changes, supporting a steady production flow. The insert’s design emphasises stable chip formation, which reduces interruptions from poor chip control and thus improves overall equipment effectiveness. Engineers benefit from measurable improvements in cycle time and predictable tool-life behaviour, making it easier to plan production runs. Fewer rejects through controlled cutting behaviour A well-matched chipformer, identified as 1E239N02-UF8, helps direct chips reliably away from the cutting zone, decreasing the risk of surface damage and workpiece rejects. The coated carbide substrate, optimised for strength at elevated temperatures, sustains the cutting edge under intermittent loads and built-up edge tendencies common with rostfreier Stahl. This results in a more consistent surface finish and repeatable dimensions—advantages that directly affect downstream processes and quality assurance. The insert’s geometry supports both finishing and tougher turning operations, so tool inventories can be simplified without compromising performance. Practical benefits for shopfloor implementation Integration of this turning insert into existing toolholders and processes is straightforward: the product is compatible with standard insert clamping systems and offers predictable behaviour with established cutting data for similar Tiger·tec Silver grades. The Walter Tools development focus on edge robustness and broad material coverage minimises trial-and-error at startup. For production managers, that means faster ramp-up times, fewer tool trials and clearer documentation for process control. When combined with routine monitoring of tool wear and cutting parameters, the insert contributes to a measurable improvement in machining economy. Contact Metav Werkzeuge today for tailored cutting data, application recommendations and to secure the Walter Tools GX24-1E239N02-UF8 WSM23S inserts for rostfreier Stahl and superalloy machining Technical data Article number: GX24-1E239N02-UF8-WSM23S-WALTER Name: GX24-1E239N02-UF8 WSM23S Type: Turning insert Grade: WSM23S Series: Tiger·tec Silver Core data Material group: S / M Chipformer: 1E239N02-UF8 Compatible materials: rostfreier Stahl (M), heat‑resistant superalloys / titanium (S) Special features Coated carbide grade (beschichtetes Hartmetall) Optimised chip control geometry Designed for high thermal load and stable cutting edges Brand: Walter Tools FAQ What materials is this insert suitable for? The GX24-1E239N02-UF8 WSM23S insert is intended for rostfreier Stahl and heat‑resistant superalloys (material groups M and S), combining a coated carbide substrate with a Tiger·tec Silver coating for thermal stability. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver, applied to the WSM23S grade, increases wear resistance and edge life under high temperatures, which helps the Walter Tools turning insert maintain consistent cutting behaviour and reduce downtime. Is the chipformer suitable for long continuous cuts? The 1E239N02-UF8 chipformer is engineered for reliable chip evacuation in sustained operations; it supports stable chip flow and helps prevent chip-related interruptions during long turning cycles. Can the insert be used for finishing and roughing? Depending on the chosen geometry and cutting parameters, the coated insert series supports both finishing and heavier turning operations, offering flexibility for varied process steps. Where can one obtain cutting data or application advice? For tailored cutting data and application recommendations for the GX24-1E239N02-UF8 WSM23S turning insert from Walter Tools, consult Metav Werkzeuge’s application specialists. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
GX24-1E250N02-CE4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP23S grade for durable, high‑productivity machining of steel and cast iron; the insert’s 1E250N02‑CE4 geometry provides reliable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. GX24-1E250N02-CE4 WKP23S indexable turning insert – Tiger‑tec Silver for steel and cast iron | Walter Tools The GX24-1E250N02-CE4 WKP23S is an indexable turning insert engineered for productive turning operations on steel (P) and cast iron (K), combining a robust coating with a chip‑optimised geometry. Tiger‑tec Silver coated carbide grade WKP23S Optimised for steel and cast iron machining Stable chip control with 1E250N02‑CE4 geometry Increased process efficiency through advanced coating and grade The Tiger‑tec Silver coating together with the WKP23S grade provides improved wear resistance and a stable cutting edge under the thermal and mechanical loads typical in turning operations. This combination reduces flank wear and extends tool life, which translates into fewer insert changes and higher machine uptime. The insert’s coated carbide substrate is designed for repeatable performance across batch and single‑part production, offering measurable gains in productivity for demanding shopfloor applications. Reliable chip formation and surface quality from tuned geometry The 1E250N02‑CE4 chipbreaker geometry is engineered to control chip shape and evacuation during turning, reducing the risk of tangled chips and minimising interruptions. With a geometry optimised for short, manageable chips in cast iron and stable swarf in steels, consistent surface finishes are achieved more readily. The result is reduced secondary operations and shorter cycle times, while process stability is supported by the insert’s predictable cutting behaviour under varying cutting speeds and feeds. Application guidance for material groups P and K and workshop benefits Designed in accordance with ISO material groups, the insert is suited to the machining of steel (P) and cast iron (K), making it a versatile choice for general production and repair workshops. The coated insert is recommended where a balance of wear resistance and edge robustness is required; matching the grade and geometry to the specific workpiece and cutting conditions will increase economy per part. Walter Tools’ series attributes focus on consistent tool life and good chip control, which helps to lower overall manufacturing costs through fewer tool changes and improved component quality. Contact Metav Werkzeuge for tailored application advice and procurement of Walter Tools Tiger‑tec Silver inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX24-1E250N02-CE4-WKP23S-WALTER Product: indexable turning insert Series: Tiger‑tec Silver Grade: WKP23S Geometry: 1E250N02-CE4 Designation: GX24-1E250N02-CE4 Facts Material compatibility: Steel (P) Material compatibility: Cast iron (K) Special features Coating: Tiger‑tec Silver Material type: coated carbide Main applications: turning of steel and cast iron Chipbreaker: 1E250N02-CE4 Brand: Walter Tools FAQ What materials is the GX24-1E250N02-CE4 WKP23S suited for? The GX24-1E250N02-CE4 WKP23S insert is designed for ISO groups P and K, meaning it is suited to machining steel and cast iron. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP23S grade enhances wear resistance and edge life, resulting in more consistent cutting performance and longer intervals between indexable insert changes. Which chip behaviour can be expected with the 1E250N02‑CE4 geometry? The 1E250N02‑CE4 chipbreaker produces controlled, short or segmented chips in cast iron and stable chip forms in steels, improving evacuation and reducing the risk of chip entanglement. Is the insert suitable for high‑volume production? Yes, the combination of the WKP23S grade and Tiger‑tec Silver coating provides robust tool life and process reliability suitable for repetitive production where tool‑change intervals and surface quality matter. Can this insert be used for finishing and roughing operations? Depending on the chosen cutting parameters and insert geometry, the insert can deliver reliable results for both roughing and semi‑finishing on steel and cast iron; adjust feeds and speeds according to material and machine capabilities. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
GX24-1E250N02-CE4 WSM33S WSM33S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WSM33S grade delivers reliable cutting performance and extended tool life when machining stainless steels and heat‑resistant alloys; order inserts directly via Metav Werkzeuge or request application advice from the consultants. GX24-1E250N02-CE4 WSM33S indexable turning insert – Tiger·tec Silver coated, for stainless steels and superalloys (Walter Tools) The GX24-1E250N02-CE4 WSM33S is a coated indexable turning insert designed for heavy‑duty turning of stainless steels and heat‑resistant superalloys, offering robust edge stability and controlled chip formation. Tiger·tec Silver coated carbide WSM33S grade for challenging materials Stable cutting edge and chip control Geometry optimised for heavy machining Consistent performance on stainless steels and similar alloys The WSM33S grade, based on a coated carbide substrate and the Tiger·tec Silver coating technology, is formulated to resist the adhesion and built‑up edge typical of stainless steels. This results in reliable chip formation and fewer unplanned tool changes, which translates into higher uptime on production lines. The combination of coating and substrate improves heat resistance at the cutting zone, meaning more consistent part quality when facing tough, ductile materials. Secure chip control and a stable cutting edge for productivity The insert geometry identified by 1E250N02-CE4 is engineered to support secure chip control under heavy cutting forces. A stable cutting edge reduces micro‑chipping and flank wear, enabling steady cutting conditions over longer tool life. For operations where repeatability and surface finish matter, the geometry and grade work together to lower the risk of edge failures and maintain process stability, reducing interruptions and inspection overhead. Optimised for heat‑resistant superalloys and titanium applications The grade also covers the 'S' ISO group for superalloys and titanium, materials known for poor thermal conductivity and high cutting temperatures. The Tiger·tec Silver coating enhances thermal shielding and maintains edge integrity at elevated temperatures, allowing for safer material removal rates and improved dimensional control. When selected according to the workpiece material and machining strategy, this insert helps achieve consistent results in demanding alloy machining. Industrial reliability and straightforward workshop integration As part of the Tiger·tec Silver series from Walter Tools, this insert supports predictable tool life and reproducible component quality, which benefits batch production and mixed‑material series alike. Integration into existing toolholders is straightforward given the standardised ISO designation, and the combination of coating and grade reduces the need for frequent regrinding or unexpected tool swaps. For procurement and process planning, the GX24‑series insert offers a balance between performance and operational efficiency. Contact Metav Werkzeuge for tailored application advice or sample availability for Walter Tools Tiger·tec Silver inserts Technical Data Article number: GX24-1E250N02-CE4-WSM33S-WALTER SKU: GX24-1E250N02-CE4-WSM33S-WALTER Product type: Indexable turning insert Brand: Walter Tools Grade: WSM33S Series: Tiger·tec Silver Facts Geometry/chipbreaker: 1E250N02-CE4 Applicable materials: Stainless steel (M), Superalloys & titanium (S) Insert material: Coated carbide Special features Coating: Tiger·tec Silver Designed for heavy‑duty turning and hard‑to‑machine materials Stable cutting edge and optimised chip control FAQ What materials is this insert intended for? The GX24‑1E250N02‑CE4 WSM33S insert from Walter Tools is specified for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), supporting secure chip formation and edge stability. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating enhances thermal resistance and reduces adhesion at the cutting edge, which extends the effective tool life of the WSM33S grade in demanding operations. Is the GX24 geometry suitable for heavy cutting? Yes, the 1E250N02‑CE4 geometry is optimised for robust chip control and a stable cutting edge, making it suitable for heavy‑duty turning where process reliability is required. Can this insert improve surface finish on difficult materials? When used with appropriate cutting parameters and holder rigidity, the WSM33S grade and the Tiger·tec Silver coating help produce consistent surface quality on ductile and heat‑resistant alloys. How should the grade be selected for a new application? Select the WSM33S grade when machining stainless steels or heat‑resistant alloys and pair the insert geometry with a holder and parameters matched to the workpiece to ensure stable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer Walter Tools.
GX24-1E250N02-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating, the WSM33S grade and a proven chipbreaker geometry for reliable machining of stainless steel and high-temperature alloys; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. GX24-1E250N02-CF5 WSM33S — Turning insert (Tiger·tec Silver) by Walter Tools, optimised for stainless steel and superalloys A GX24-1E250N02-CF5 WSM33S is a coated cemented carbide turning insert from the Tiger·tec Silver series, designed for secure chip formation and stable cutting edges when machining stainless steel and heat-resistant superalloys Tiger·tec Silver coated for thermal stability Grade WSM33S for difficult-to-cut alloys Optimised chipbreaker 1E250N02-CF5 Reliable cutting-edge stability High-performance coating for demanding alloys The combination of the Tiger·tec Silver coating and the WSM33S grade delivers consistent performance when machining materials that generate heat and resist chip formation. The coating technology improves thermal resistance and reduces abrasive wear, which means more predictable tool life under elevated temperatures. For production environments where parts are routinely made from stainless steel or nickel‑based superalloys, this results in fewer unexpected tool changes and a steadier process output. The insert’s design supports controlled chip flow, reducing the risk of built-up edge and helping to maintain component tolerances. Optimised geometry that improves process security The dedicated 1E250N02-CF5 chipbreaker geometry contributes to stable chip control and repeatable cutting behaviour. This geometry is specifically intended to work with the mechanical properties of stainless steel and heat-resistant superalloys, where chips can be stringy or thermally adhesive. By promoting short, consistent chips and reducing vibrations at the cutting zone, the insert helps to preserve the cutting edge and supports consistent surface finish. The result is enhanced process security and reduced rework in series production. Application-led durability and economical machining The cemented carbide composition and the coating synergy are engineered for a broad range of hard-to-machine steels and superalloys, offering a balance between wear resistance and edge toughness. This balance is particularly valuable when tool life must be predictable: the insert minimises flank wear and maintains dimensional stability over longer tool paths. The productive nature of the grade helps to lower overall machining costs by reducing downtime for insert changes and supporting longer uninterrupted cycles on turning centres. Integration and selection guidance for shop floors The insert is suitable for standard indexable holders compatible with insert designation GX24-1E250N02-CF5 WSM33S; selection should consider workpiece material, cut depth and feed to exploit the chipbreaker fully. For stainless steel applications, prioritise coolant strategy and stable clamping to complement the insert’s thermal resilience. When replacing tools or configuring new operations, pairing this insert with rigid toolholders and tuned parameters will maximise the benefit of the Tiger·tec Silver technology and the WSM33S grade, helping to achieve the desired surface quality and repeatability. Contact Metav Werkzeuge today to specify Walter Tools Tiger·tec Silver WSM33S inserts for stainless steel and superalloy turning applications — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for personalised advice Technical data Article number: GX24-1E250N02-CF5-WSM33S-WALTER Designation: GX24-1E250N02-CF5 WSM33S Product type: Drehwendeschneidplatte / Turning insert Manufacturer: Walter Tools Facts Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 1E250N02-CF5 Material groups: S / M Special features Coating technology: Tiger·tec Silver Suitable for: stainless steel (M), heat‑resistant superalloys and titanium alloys (S) Intended use: secure chip formation and stable cutting edge Material: coated cemented carbide FAQ What materials is this insert best suited for? The GX24-1E250N02-CF5 WSM33S from Walter Tools is formulated for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering improved chip control and thermal resistance for those materials. How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating on the WSM33S grade increases thermal stability and wear resistance, allowing the insert to maintain cutting‑edge integrity and more predictable tool life under demanding conditions. Is this insert compatible with standard turning toolholders? Yes; the insert designation GX24-1E250N02-CF5 corresponds to standard indexable geometries and fits holders designed for that insert type, but verify seat angle and clamping style before use. What operational improvements can be expected with this grade? Using the WSM33S grade typically results in better chip control, fewer built‑up edges and more consistent surface finish when machining stainless steel and superalloys, contributing to higher process security. Can the chipbreaker be used with both finishing and roughing cuts? The 1E250N02‑CF5 chipbreaker is optimised for controlled chip formation; depending on holder rigidity and machining parameters, it can be applied across a range of feeds for both semi‑finishing and finishing tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Trademarks and protected trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new merchandise from the manufacturer. The Walter brand is used where appropriate to describe the product.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com