GX16-2E120L00-GD8 WSM23S WSM23S Wendeplatten - Walter Tools
The combination of the WSM23S grade and the Tiger·tec Silver coating delivers durable, thermally resistant cutting performance for demanding materials, while the precisely engineered chipbreaker ensures stable chip formation and consistent surface quality; order tailored tooling setups through Metav Werkzeuge or consult the technical team for application advice. GX16-2E120L00-GD8 WSM23S Walter Tools indexable turning insert — Tiger·tec Silver, for stainless steels and superalloys GX16-2E120L00-GD8 WSM23S is an indexable turning insert designed for high-demand turning of rostfreier Stahl (stainless steels) and heat-resistant superalloys, combining a thermally robust coating with a geometry tuned for secure chip control Tiger·tec Silver coated for high thermal resistance Optimised for stainless steel and superalloys Stable cutting edge for reliable production Walter Tools quality and consistent tool life Greater productivity with heat-resistant coating and grade The combination of the Tiger·tec Silver coating and the WSM23S carbide grade provides a measurable advantage when machining materials that generate high temperatures and tend to form built-up edge. The advanced coating reduces friction and increases thermal resistance, which in turn helps to protect the cutting edge under sustained loads. For manufacturers working with rostfreier Stahl and nickel-based alloys, this means fewer unscheduled tool changes and more predictable cycle times, supporting leaner process planning and improved capacity utilisation. Chip control that prevents interruptions and improves surface finish The 2E120L00-GD8 chipbreaker has been engineered to produce short, controllable chips in interrupted or continuous cuts, reducing the risk of chip entanglement and secondary machining. By promoting consistent chip formation, the insert lowers the likelihood of surface damage and edge instability. This geometry is particularly beneficial for alloys classified in ISO groups M and S, where poor chip evacuation and workpiece adhesion are common challenges; the result is a more stable turning process and improved first-pass yield. Geometry and edge stability for demanding materials A precisely prepared cutting edge combined with the coated carbide substrate gives a balance between toughness and wear resistance. The grade is tuned for applications where the material’s toughness and heat generation put significant stress on the tool, such as rostfreier Stahl and titanium-containing alloys. The insert’s stable cutting edge supports repeatable dimensional accuracy and consistent surface quality, reducing rework and ensuring that downstream operations receive reliably finished components. Process reliability and economic operation in production Using a coated indexable insert from a recognised system like this one reduces tooling complexity: only the worn insert needs replacing rather than entire cutters, which lowers inventory and maintenance overhead. The Walter Tools engineering focus on consistent tool life and reproducible performance helps to secure process windows and minimise quality deviations. For production managers, the economic benefit is twofold — predictable consumable intervals and fewer stoppages — enabling better cost-per-part calculations and improved delivery reliability. Contact Metav Werkzeuge to configure tooling with the Walter Tools GX16-2E120L00-GD8 WSM23S insert for optimised machining of rostfreier Stahl and superalloys, or request application-specific recommendations from our technical consultants Technical Data Article number: GX16-2E120L00-GD8-WSM23S-WALTER Designation: GX16-2E120L00-GD8 WSM23S Type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: 2E120L00-GD8 Material group: S / M Key figures Manufacturer: Walter Tools SKU: GX16-2E120L00-GD8-WSM23S-WALTER Special features Coating: Tiger·tec Silver Suitable for: rostfreier Stahl (stainless steels), superalloys, titanium depending on geometry Carbide type: coated carbide grade Application focus: stable chip formation, edge stability, productive turning FAQ Which materials are best machined with this insert? The GX16-2E120L00-GD8 WSM23S insert from Walter Tools is optimised for rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium (ISO group S), providing edge stability under high thermal loads. What does the Tiger·tec Silver coating deliver? The Tiger·tec Silver coating enhances thermal resistance and reduces friction on the cutting edge; in the WSM23S grade it helps to prevent built-up edge and extends tool life in demanding turning tasks. How does the 2E120L00-GD8 chipbreaker improve process reliability? The chipbreaker geometry produces controllable, short chips and promotes consistent chip evacuation, which lowers the risk of chip-related interruptions and contributes to improved surface finish when machining difficult materials. Is the insert suitable for interrupted cutting and heavy-depth cuts? Yes, the combination of a robust WSM23S grade and the Tiger·tec Silver coating provides enhanced edge protection for applications with interrupted cuts or elevated cutting forces, improving resistance to edge chipping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision cutting tools with global presence. Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are used solely for descriptive purposes and do not imply any affiliation with or endorsement by the trademark owners.
GX16-2E120R00-GD8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM23S grade for reliable cutting performance and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-tailored recommendations. GX16-2E120R00-GD8 WSM23S – Indexable turning insert, Tiger·tec Silver, for rostfreier Stahl and superalloys | Walter Tools The GX16-2E120R00-GD8 WSM23S is an indexable turning insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, pairing a robust geometry with the Tiger·tec Silver coating for enhanced edge stability Tiger·tec Silver coated carbide grade WSM23S Optimised for rostfreier Stahl and superalloys Stable cutting edge for heavy machining Compatible with GX16 clamping systems Increased productivity through a heat‑resistant grade The combination of the Tiger·tec Silver series and the WSM23S grade delivers a coated carbide solution that focuses on thermal stability and controlled chip formation. This composition supports consistent cutting when tackling materials that build heat quickly, reducing the tendency for adhesion and built-up edge. The result is an improvement in process reliability and predictable tool life, which translates into fewer interruptions and higher throughput on demanding turning operations. Secure edge life and predictable wear for cost efficiency Designed for aggressive conditions, the insert offers a stable cutting edge and optimised chip control to sustain heavy cuts and maintain surface integrity. The coating and substrate combination increases wear resistance and protects the cutting edge from premature breakdown, enabling longer tool cycles and less frequent index changes. For manufacturing environments where repeatability and uptime are essential, this solution supports a measurable increase in operational efficiency and lower machining costs over time. Easy integration and application guidance for shop floors The insert geometry GX16-2E120R00-GD8 provides a familiar mounting and handling profile for standard turning toolholders, helping to simplify setup and integration into existing tool systems. Intended primarily for machining rostfreier Stahl (ISO group M) and superalloys (ISO group S), the grade performs well across roughing and semi-finishing operations depending on insert geometry and cutting data. If application-specific cutting parameters or recommendations are required, technical consultation is available to match insert selection and cutting data to the intended component and machine. Contact Metav Werkzeuge for application-specific recommendations on the Tiger·tec Silver WSM23S insert and to arrange supply from Walter Tools; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX16-2E120R00-GD8-WSM23S-WALTER Designation: GX16-2E120R00-GD8 WSM23S Type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM23S Material base: Coated carbide Facts Geometry code: 2E120R00-GD8 Material groups: S / M Application groups: rostfreier Stahl (M), superalloys / high-temp alloys (S) SKU: GX16-2E120R00-GD8-WSM23S-WALTER UID: GX16-2E120R00-GD8-WSM23S-WALTER Special features Heat-resistant coating technology Tiger·tec Silver Optimised chip control and stable edge formation Suited for heavy machining and high thermal load Designed for reproducible cutting performance FAQ What materials is this insert best suited for? The GX16-2E120R00-GD8 WSM23S insert is engineered primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), offering thermal stability and reliable chip control. What does the WSM23S grade mean in practice? WSM23S is a Walter Tools grade within the Tiger·tec Silver family that combines a wear‑resistant substrate with a high‑performance coating to maintain edge stability under elevated temperatures. Can this insert be used for roughing and finishing? Depending on the chosen geometry and cutting parameters, the insert supports heavy roughing as well as semi‑finishing tasks while preserving surface quality and tool life. Is the GX16 geometry compatible with standard toolholders? The GX16‑2E120R00‑GD8 designation corresponds to a common insert form intended for use with compatible GX16 clamping systems and toolholders. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating improves heat resistance and wear behaviour, resulting in fewer index changes and more consistent production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
GX16-2E140L00-GD8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of a high‑performance, coated carbide insert that balances edge stability and reliable chip control for demanding turning tasks; the combination of Tiger‑tec Silver technology and the WSM23S grade supports secure machining of stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or consult the Metav team for application advice and selection support. GX16-2E140L00-GD8 WSM23S Drehwendeschneidplatte – Tiger‑tec Silver, for stainless steels and superalloys | Walter Tools The GX16-2E140L00-GD8 WSM23S is a coated indexable insert engineered for robust performance when turning rostfreie Stähle and heat‑resistant alloys in industrial production. Tiger‑tec Silver coating for durable edges WSM23S grade for stainless and superalloys Optimised 2E140L00‑GD8 chipbreaker geometry Consistent chip control and extended edge life Higher process reliability through material‑adapted grade and coating The insert is built on the WSM23S grade within the Tiger‑tec Silver series, a coated carbide solution developed for materials that stress the cutting edge. This combination promotes stable chip formation and reduces the risk of built‑up edge when machining rostfreie Stähle (M). The engineered coating improves thermal resistance and wear behaviour, which translates into more predictable tool life and reduced frequency of index changes in continuous production environments. Better chip control and predictable surface quality with optimised geometry The included 2E140L00‑GD8 chipbreaker geometry is designed to generate short, controllable chips under the cutting conditions typical for stainless steel and superalloy turning. As a result, swarf management is simplified and the likelihood of surface defects is reduced. Explaining the function: a chipbreaker forces chips into segmented shapes and controls their evacuation, so operators assess machining parameters primarily by feed and depth rather than by reactive gumming or erratic chip flow. Clear application scope for process planning and tool selection Conformant with ISO 513 material group designations, the insert is intended for groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium). Selection decisions benefit from this clarity: when facing tough, heat‑generating alloys, the WSM23S grade helps maintain edge form; for stainless grades it supports secure shearing and consistent surface finish. The result is fewer unplanned interruptions and a more efficient turning cycle when integrated into a tool‑set strategy. Industrial compatibility and brand confidence for continuous production Produced by Walter Tools, the insert aligns with industrial demands for repeatability and process stability. The design suits automated turning applications and offline toolrooms alike, offering a balance between cutting performance and predictable tool life. For operations aiming to increase uptime, the combination of Tiger‑tec Silver technology and a dedicated chipbreaker delivers measurable gains in machining consistency without sacrificing flexibility for different workpiece alloys. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts and to arrange a cutting parameter review with Metav Werkzeuge Technical Data SKU: GX16-2E140L00-GD8-WSM23S-WALTER Label: Drehwendeschneidplatte GX16-2E140L00-GD8 WSM23S Walter Tools Product type: Drehwendeschneidplatte Facts ISO designation: GX16-2E140L00-GD8 WSM23S Grade: WSM23S Series: Tiger‑tec Silver Special features Coating technology: Tiger‑tec Silver (coated carbide) Chipbreaker: 2E140L00‑GD8 Material groups: S, M Suitable for: rostfreie Stähle and heat‑resistant superalloys / titanium FAQ What materials is this insert suitable for? The GX16-2E140L00-GD8 WSM23S insert from Walter Tools is specified for ISO groups M and S, which covers rostfreie Stähle and heat‑resistant superalloys or titanium. How does the 2E140L00‑GD8 chipbreaker help in practice? The 2E140L00‑GD8 chipbreaker geometry on the insert controls chip shape and evacuation, improving swarf management and supporting consistent surface finish during turning. Is the WSM23S grade coated or uncoated? WSM23S is a coated carbide grade in the Tiger‑tec Silver series; the coating enhances thermal resistance and cutting‑edge life for demanding turning operations. Can this insert be used for high‑speed turning? The combination of the Tiger‑tec Silver coating and the WSM23S grade provides improved thermal stability; suitability for high‑speed applications depends on machine capability and specific cutting parameters. What is the designation to order this insert? Order using the designation GX16-2E140L00-GD8 WSM23S (SKU: GX16-2E140L00-GD8-WSM23S-WALTER) to ensure the correct grade and geometry from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only and do not imply any connection between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX16-2E140R00-GD8 WSM23S WSM23S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM23S carbide grade delivers reliable edge stability and secure chip formation for demanding turning tasks; benefit from efficient machining of stainless steel and heat‑resistant superalloys. Order directly via Metav Werkzeuge or consult the technical team for application support. GX16-2E140R00-GD8 WSM23S turning indexable insert — Tiger·tec Silver, Walter Tools The GX16-2E140R00-GD8 WSM23S is a coated turning insert engineered for stable performance in the machining of stainless steel and high‑temperature alloys, optimised for heavy‑duty and difficult‑to‑cut materials Tiger·tec Silver coating for high heat resistance Designed for stainless steel and superalloys Coated carbide grade WSM23S for edge stability Reliable chip formation in demanding operations Longer tool life through heat‑resistant coating and grade The combination of Tiger·tec Silver technology and the WSM23S coated carbide grade is intended to increase resistance to thermal and mechanical wear during continuous turning. This results in a more stable cutting edge and reduced flank wear compared with uncoated or conventional grades, which supports longer tool life and fewer interruptions on production runs. The coating concept is particularly beneficial where thermal loads and adhesive wear challenge the cutting edge. Consistent chip control for predictable machining The insert’s geometry 2E140R00-GD8 is configured to support secure chip formation under heavy cutting conditions. Stable chip control minimises built‑up edge formation and reduces the risk of surface damage, so component quality and process reproducibility are improved. For operations on stainless steel and heat‑resistant superalloys, this predictability translates into fewer reworks and a smoother workflow on the lathe. Application suitability and machining advantages Specified for the ISO material groups M and S, this insert is suitable for machining stainless steel (M) and heat‑resistant superalloys or titanium (S), where thermal stability and edge robustness are required. The grade’s balance between toughness and hardness enables productive cutting on materials that would otherwise cause rapid tool degradation, supporting higher process stability and consistent surface integrity of finished parts. Operational efficiency and tooling integration The insert is supplied in the established GX16 geometry family and is compatible with standard turning toolholders that accept this designation. By selecting a dedicated coated grade such as this one, cycle times can be optimised because the tool maintains cutting performance under increased thermal stress. Process planners benefit from the predictable behaviour of the grade when scheduling tool changes and estimating tool life for batch production. Contact Metav Werkzeuge for tailored advice on the Walter Tools GX16-2E140R00-GD8 WSM23S turning insert and for assistance with toolholder compatibility and application parameters — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: GX16-2E140R00-GD8-WSM23S-WALTER Item description: Drehwendeschneidplatte GX16-2E140R00-GD8 WSM23S Walter Tools Type: Turning indexable insert Grade: WSM23S Series: Tiger·tec Silver Geometry / breaker: 2E140R00-GD8 Designation: GX16-2E140R00-GD8 ISO designation: GX16-2E140R00-GD8 WSM23S Material group: S / M Manufacturer: Walter Tools Facts Suitable for stainless steel (M) Suitable for heat‑resistant superalloys / titanium (S) Coated carbide grade No dimensions provided in data Special features Tiger·tec Silver coating technology WSM23S: coated hardmetal grade for heat resistance Optimised for secure chip formation Intended for demanding turning applications FAQ What materials is this insert suitable for? The GX16-2E140R00-GD8 WSM23S insert is specified for stainless steel (ISO group M) and for heat‑resistant superalloys or titanium (ISO group S), offering thermal stability and edge robustness for these materials. What does the Tiger·tec Silver designation mean for cutting performance? Tiger·tec Silver denotes a coating and substrate combination that enhances heat resistance and wear performance; the WSM23S grade uses this technology to maintain cutting edge stability in thermally demanding turning operations. Is this insert compatible with standard GX16 toolholders? Yes, the insert follows the GX16 designation and is intended for insertion into compatible turning toolholders that accept this geometry and clamping arrangement. How does the WSM23S grade affect chip formation? The WSM23S coated carbide is designed to support secure and consistent chip breaking under heavy loads, which reduces the likelihood of built‑up edge and improves surface finish consistency. Are there recommended sectors or applications for this insert? This insert is particularly suited to production environments where stainless steel and heat‑resistant alloys are machined regularly and where process stability and extended tool life are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; no affiliation with or endorsement by the trademark holders is implied. The offered item is an original, unused product from the manufacturer Walter Tools.
GX16-2E300N02-CF5 WSM23S WSM23S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver coating together with the WSM23S grade delivers enhanced thermal stability and predictable chip control, resulting in longer tool life and fewer interruptions when machining stainless steel and high‑temperature alloys; order the insert directly via Metav Werkzeuge or request application advice from their consultants. GX16-2E300N02-CF5 WSM23S indexable turning insert — Tiger·tec Silver coating for stainless steel and superalloys by Walter Tools The GX16-2E300N02-CF5 WSM23S is an indexable turning insert designed for heavy‑duty turning of stainless steel and heat‑resistant superalloys, offering optimised geometry for stable cutting under elevated temperatures. Tiger·tec Silver coating for thermal stability Optimised chipbreaker 2E300N02‑CF5 for chip control Suited to stainless steel and high‑temp alloys Consistent thermal stability for uninterrupted production The combination of the Tiger·tec Silver series and the WSM23S grade focuses on thermal stability and wear resistance. This coating technology reduces heat transfer to the cutting edge, which in turn minimises edge degradation when machining materials that tend to work‑harden. For operations involving stainless steel or similar tough alloys, the result is a more predictable tool life and reduced rework rates. The engineering of the grade supports a balance between toughness and hardness to handle intermittent cuts and elevated cutting temperatures. Predictable chip formation and process reliability With the 2E300N02‑CF5 chipbreaker geometry, the insert promotes controlled chip segmentation and evacuation, which reduces the risk of built‑up edge and unstable cutting conditions. Improved chip control lowers the likelihood of machine stoppages and contributes to consistent surface finish from pass to pass. The insert geometry also helps maintain a stable cutting edge, so feeds and speeds can be applied with confidence in repeatable production environments. Less manual intervention for chip handling speeds up cycle times and reduces scrap. Practical benefits for workshop integration and traceable performance Integration into existing turning centres is straightforward: the insert designation and series ensure compatibility with standard toolholders and established machining parameters. The grade is aligned with material categories defined in ISO 513, indicating suitability for group M (stainless steel) and group S (superalloys and titanium) applications. This alignment supports process documentation and quality control in production workflows. Backed by the reputation of Walter Tools, the insert offers a reliable basis for process optimisation and tool inventory rationalisation. Contact Metav Werkzeuge for tailored cutting data and availability of Tiger·tec Silver inserts; reach the technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss GX16-2E300N02-CF5 options and suggested parameters Technical Data Article number: GX16-2E300N02-CF5-WSM23S-WALTER Product: indexable turning insert Designation: GX16-2E300N02-CF5 WSM23S Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: 2E300N02-CF5 Manufacturer: Walter Tools Core data Material groups: S / M Applicable standards: ISO 513 (materials M and S) Insert type: indexable turning insert Coating technology: Tiger·tec Silver Special features Coating: Tiger·tec Silver (coated carbide) Grade properties: coated carbide for thermal stability and edge control Suitable for: stainless steel; superalloys and titanium Application focus: turning of heat‑resistant and tough materials FAQ What materials is this insert intended for? The GX16-2E300N02-CF5 WSM23S insert is engineered for machining stainless steel and for demanding work on heat‑resistant superalloys and titanium (ISO 513 groups M and S). How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WSM23S grade increases thermal resistance and reduces abrasive wear, resulting in steadier cutting performance and longer intervals between index changes. What is the role of the 2E300N02‑CF5 chipbreaker? The 2E300N02‑CF5 chipbreaker promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of chip‑related interruptions during turning operations. Can this insert be used for interrupted cuts or heavy cuts? The WSM23S grade combined with the insert geometry is designed to withstand demanding conditions, including intermittent engagement and elevated cutting forces typical of heavy‑duty turning. Is the insert compatible with standard toolholders? The GX16‑designation corresponds to standard indexable insert formats, allowing use with compatible turning toolholders commonly deployed in metalcutting workshops. Manufacturer: Walter AG; Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-2E300N02-CK8 WK1 Wendeplatten - Walter Tools
Take advantage of the combination of a proven WK1 uncoated carbide grade and the 2E300N02-CK8 chipbreaker geometry for stable turning processes and consistent chip control; order via Metav Werkzeuge or consult the Metav advisors for application-specific guidance. GX16-2E300N02-CK8 WK1 indexable turning insert — Walter Tools, uncoated carbide with 2E300N02-CK8 chipbreaker GX16-2E300N02-CK8 WK1 is an indexable turning insert designed for general turning applications where reproducible chip control and predictable cutting behaviour are priorities Uncoated cemented carbide grade WK1 Precision chipbreaker 2E300N02-CK8 ISO insert GX16 series geometry Designed for stable, productive turning Greater process reliability from a robust uncoated grade The WK1 designation identifies an uncoated cemented carbide grade developed for consistent performance in a wide range of turning operations. The insert’s geometry and substrate deliver a predictable wear pattern, which simplifies tool-life planning and reduces unexpected downtime. The chipbreaker 2E300N02-CK8 actively shapes and evacuates swarf, helping to avoid entanglement and protecting both the workpiece and the toolholder. “Chipbreaker” refers to a formed groove or face modification that causes long chips to break into manageable segments; this is especially beneficial in automated production where reliable chip flow supports continuous operation. Improved surface quality and efficient chip control for productivity The tailored chip control of this insert contributes directly to a better surface finish and fewer secondary operations. By influencing chip curl and evacuation, the 2E300N02-CK8 geometry reduces the risk of recutting swarf and minimises vibration at the cutting edge; the result is a more stable cutting process with fewer rejects. For precise material compatibility, the product matrix should be consulted to match cutter grade and parameters to the workpiece; this ensures the chosen grade and geometry pay off in measured productivity gains and extended effective tool life. Easy integration into existing tool setups and stock planning With the standardised GX16 designation and indexable format, the insert integrates into common toolholders and indexable systems, enabling quick re-indexing and simple replacement without complex adjustments. The compact, repeatable geometry supports consistent setup and reduces machine downtime during tool changes. When stocked alongside complementary Walter Tools items, this insert contributes to a predictable supply chain and economical machining cycles, supporting stable output in batch or continuous production environments. Contact Metav Werkzeuge for supply details and application advice on Walter Tools GX16-2E300N02-CK8 WK1 indexable inserts Technical data Article number: GX16-2E300N02-CK8-WK1-WALTER Product label: Drehwendeschneidplatte GX16-2E300N02-CK8 WK1 Walter Tools Product type: Indexable turning insert Facts ISO designation: GX16-2E300N02-CK8 WK1 Grade: WK1 (uncoated cemented carbide) Chipbreaker: 2E300N02-CK8 Special features Series: Walter Schneidstoffsorte - Serie offen Material specification: Katalogabhängig Format: Indexable insert, standard GX16 geometry FAQ What materials is this insert suitable for? Material suitability depends on the specific grade and application; consult the product matrix for precise recommendations for the GX16-2E300N02-CK8 WK1 insert How does the 2E300N02-CK8 chipbreaker improve machining? The 2E300N02-CK8 chipbreaker controls chip shape and evacuation, reducing recutting and improving surface finish when using the GX16-2E300N02-CK8 WK1 indexable insert Is the insert coated? No, the WK1 grade for this GX16-2E300N02-CK8 insert is an uncoated cemented carbide Can this insert be re-sharpened or recoated? The GX16-2E300N02-CK8 WK1 insert is designed as a replaceable indexable cutting part; reconditioning options should be assessed against economics and Walter Tools recommendations How should compatibility with existing toolholders be checked? Verify holder compatibility with the GX16 series geometry and the ISO designation GX16-2E300N02-CK8 WK1; confirm dimensions and clamping type before ordering Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
GX16-2E300N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM23S grade for reliable chip formation and long wear life; the combination of heat-resistant coating and UF8 chipbreaker geometry supports consistent productivity in the machining of difficult-to-cut alloys. Order the GX16-2E300N02-UF8 WSM23S directly via Metav Werkzeuge or ask our consultants if needed. GX16-2E300N02-UF8 WSM23S Turning Insert – Tiger·tec Silver, for rostfreier Stahl and Superalloys (Walter Tools) The GX16-2E300N02-UF8 WSM23S is a coated indexable turning insert engineered for heavy-duty turning in rostfreier Stahl and heat‑resistant superalloys, offering robust edge stability and optimised chip control for industrial production. Tiger·tec Silver coating for heat resistance Stable cutting edge for extended tool life Suitable for rostfreier Stahl and superalloys Optimised chip control with UF8 geometry Higher throughput through heat‑resistant coating and stable edge control The coated carbide grade WSM23S combines a thermally resistant surface treatment with a substrate designed for tough conditions. This configuration reduces the tendency for built-up edge on difficult materials and maintains a consistent edge form under increased temperatures. The practical result is improved process reliability and fewer interruptions for tool changes, which supports continuous production and predictable output. By focusing on thermal management and edge robustness, this solution contributes to measurable improvements in machining stability when working with rostfreier Stahl and nickel‑based alloys. Consistent chip formation and reduced rework thanks to UF8 geometry The 2E300N02‑UF8 chipbreaker geometry is tailored for controlled chip segmentation during turning operations. Improved chip evacuation minimises risks of chip entanglement and surface damage, lowering the need for secondary finishing. For workshop planners and production engineers, this means fewer scrap parts and reduced cycle variability. The engineered chip flow also assists coolant access and thermal dissipation at the cutting zone, which in turn preserves tool life and enhances surface integrity on sensitive workpiece materials. Broad applicability and simple integration into existing tool systems Designed as an indexable turning insert, the item fits standard toolholders compatible with its designation and allows straightforward replacement during planned maintenance. The coated carbide composition and the Grade WSM23S make the insert suitable across ISO groups M and S, covering rostfreier Stahl as well as heat‑resistant superalloys and titanium alloys depending on component geometry. This flexibility supports mixed‑material production runs and reduces the need for multiple specialised grades, helping to simplify tool inventory while maintaining machining performance. Contact Metav Werkzeuge for tailored application advice and procurement of the GX16-2E300N02-UF8 WSM23S turning insert by Walter Tools; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GX16-2E300N02-UF8-WSM23S-WALTER SKU: GX16-2E300N02-UF8-WSM23S-WALTER Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger·tec Silver Facts Grade: WSM23S Chipbreaker: 2E300N02‑UF8 Material designation: S / M Suitable ISO groups: M, S Special features Coating technology: Tiger·tec Silver Application: Heavy-duty machining, rostfreier Stahl, superalloys Cutting concept: Stable cutting edge, optimised chip control Mounting form: Indexable insert design FAQ What materials is this insert best suited for? The GX16-2E300N02-UF8 WSM23S insert is intended for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering heat resistance and edge stability for demanding turnings. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver on the WSM23S grade provides thermal protection and wear resistance, which helps maintain the cutting edge and supports longer tool life under elevated temperatures. Can this insert be used for titanium alloys? Depending on component geometry and cutting parameters, the Grade WSM23S and its UF8 chipbreaker can be applied to titanium and similar heat‑resistant materials with appropriate machining strategies. What advantage does the UF8 chipbreaker provide? The UF8 geometry is designed for controlled chip formation and efficient evacuation, reducing surface damage risk and lowering rework rates during turning operations. Is this insert compatible with standard toolholders? Yes, the indexable design and the GX16‑designation align with common toolholder systems for turning inserts of this form factor. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-2E300N03-GD3 WKP23S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP23S grade for extended tool life and consistent chip behaviour; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Indexable turning insert GX16-2E300N03-GD3 WKP23S — Tiger‑tec Silver (Walter Tools) The GX16-2E300N03-GD3 WKP23S is a coated carbide indexable insert designed for efficient turning of steel and cast iron in industrial machining. Tiger·tec Silver coating for long life WKP23S grade optimised for steel and cast iron Stable chip control with 2E300N03-GD3 chipbreaker Suitable for productive, repeatable turning Consistent performance for steel and cast iron components The combination of the Tiger‑tec Silver coating and the WKP23S cutting grade delivers reliable wear resistance under typical turning conditions for P and K materials. The insert’s geometry and chipbreaker are engineered to produce short, controllable chips when machining cast iron and stable, predictable chips when cutting steel. This results in fewer process interruptions, longer edge life and more consistent finished-part quality, which supports higher machine utilisation and lower overall tooling costs. Coating technology explained for better process planning The Tiger‑tec Silver surface treatment is a multi‑layer coating applied to coated carbide substrates to reduce abrasive and adhesive wear. For practical planning, this means improved resistance to high cutting temperatures and better protection of the cutting edge in intermittent or continuous cuts. The result is a reduced rate of edge degradation and a more consistent surface finish on turned parts, allowing for longer intervals between index changes and less operator intervention. Designed chip control and machining stability The specified chipbreaker 2E300N03-GD3 promotes efficient chip formation and evacuation under typical turning feeds and depths. Stable chip control reduces the risk of workpiece damage and toolholder interference, supporting uninterrupted production runs. Combined with the insert’s grade, the geometry helps maintain a strong cutting edge that resists chipping during tougher cuts, enabling productive material removal rates and repeatable dimensional results. Practical application and tool selection guidance In workshop practice, the insert is used in conventional turning applications where a balance of productivity and tool life is required. Its suitability for both steel and cast iron simplifies tooling inventories for mixed‑material batches. When selecting cutting parameters, start with conservative speeds and feeds and increase within machine and workholding limits while monitoring surface finish and edge wear. The insert is compatible with standard turning toolholders designed for this ISO designation and can be specified by its SKU for procurement and tool management. Contact Metav Werkzeuge for tailored recommendations and fast supply of Walter Tools Tiger‑tec Silver inserts: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: GX16-2E300N03-GD3-WKP23S-WALTER Description: Indexable turning insert GX16-2E300N03-GD3 WKP23S Series: Tiger‑tec Silver Grade: WKP23S Chipbreaker: 2E300N03-GD3 Material: Coated carbide Facts SKU: GX16-2E300N03-GD3-WKP23S-WALTER Applicable materials: P (steel), K (cast iron) Special features Coating technology: Tiger·tec Silver Main applications: Turning of steel and cast iron Manufacturer: Walter Tools FAQ Which materials are best suited for this insert? The GX16-2E300N03-GD3 WKP23S insert is designed for steel (P) and cast iron (K) applications; the WKP23S grade and Tiger‑tec Silver coating provide balanced performance across these material groups. What benefit does the Tiger‑tec Silver coating provide? Tiger‑tec Silver increases thermal and abrasive resistance on the coated carbide substrate, extending edge life and enabling more consistent surface quality during extended turning operations with the GX16-2E300N03-GD3 WKP23S. How does the chipbreaker 2E300N03-GD3 affect machining? The 2E300N03-GD3 chipbreaker produces short, controlled chips in cast iron and stable chipforms in steels, improving chip evacuation and reducing the likelihood of toolholder interference. Is this insert suitable for high-speed turning? The WKP23S grade combined with Tiger‑tec Silver is optimised for productive cutting; machining speeds should be chosen according to workpiece material, toolholder stability and machine capability to achieve the required productivity. How should the insert be specified when ordering? Order by the full designation GX16-2E300N03-GD3 WKP23S and reference the SKU GX16-2E300N03-GD3-WKP23S-WALTER to ensure the correct grade and chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original and brand new.
GX16-2E300N03-GD3 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM33S grade and a robust chipbreaker geometry to secure reproducible turning of demanding materials; order the insert directly via Metav Werkzeuge or ask the consultants for machining recommendations. GX16-2E300N03-GD3 WSM33S turning indexable insert — Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) GX16-2E300N03-GD3 WSM33S is a coated turning indexable insert designed for heavy-duty applications on rostfreier Stahl and heat‑resistant superalloys, offering edge stability and controlled chip formation Tiger·tec Silver coating for heat resistance WSM33S grade for rostfreier Stahl and superalloys Optimised 2E300N03-GD3 chipbreaker geometry Consistent cutting-edge stability Optimised performance for hard‑to‑machine alloys The combination of the Tiger·tec Silver coating with the WSM33S carbide grade delivers markedly improved thermal resistance and stable cutting edge behaviour when turning materials that generate high heat. This insert is engineered to reduce edge wear under thermally aggressive conditions, which translates into longer tool life and fewer interruptions in production. The design focuses on predictable flank wear and consistent dimensional results, making it suitable where repeatability and surface quality are priorities. Secure chip control and process reliability The dedicated 2E300N03-GD3 chipbreaker provides controlled chip segmentation and evacuation, reducing the risk of built-up edge and workpiece damage. By favouring stable chip formation, the insert supports uninterrupted machining of difficult materials such as rostfreier Stahl and nickel‑based alloys. This yields less downtime for manual cleaning and safer interaction with automated handling systems, improving overall throughput and process safety. Practical benefits for workshop productivity As an indexable insert from Walter Tools' Tiger·tec Silver series, this component is intended to offer a balance between wear resistance and toughness, supporting productive cutting on demanding workpieces. The geometry and coating combination minimise regrind frequency and help maintain consistent surface finish, which reduces part rework and supports predictable tool-change scheduling. For shops seeking reliable averages across batches, the insert contributes to steady cycle times and lower per‑part tooling costs. Contact Metav Werkzeuge for tailored application advice and specify the Walter Tools Tiger·tec Silver GX16-2E300N03-GD3 WSM33S insert for demanding rostfreier Stahl and superalloy turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX16-2E300N03-GD3-WSM33S-WALTER Article designation: GX16-2E300N03-GD3 WSM33S Product type: Turning indexable insert (Drehwendeschneidplatte) Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 2E300N03-GD3 Key specifications Material/substrate: coated carbide Application groups: S / M Suitable for: rostfreier Stahl Manufacturer: Walter Tools Special features High thermal resistance coating Tiger·tec Silver Designed for heavy cutting and heat‑prone materials Optimised chip control for secure evacuation Stable edge for reproducible surface finish FAQ What materials is this insert suitable for? The GX16-2E300N03-GD3 WSM33S insert from Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys; the WSM33S grade supports machining where thermal resistance and edge stability are required. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases thermal resistance and reduces adhesive wear, helping the WSM33S grade maintain a stable cutting edge under elevated temperatures and abrasive conditions. Is the chipbreaker geometry suitable for semi‑finish and finish turning? The 2E300N03-GD3 chipbreaker offers controlled chip formation that supports both semi‑finish and finish operations on challenging materials, improving surface quality while ensuring safe chip evacuation. Can this insert be used in existing Walter toolholders? Yes; the GX16-2E300N03-GD3 indexable insert is compatible with Walter Tools toolholder systems designed for the GX16 family geometry, enabling straightforward integration into existing turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original and brand-new from the manufacturer.
GX16-2E300N03-GD6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Silver technology, the heat‑resistant WSM33S grade and reliable chip control to maintain process stability in demanding turning operations. Order directly via Metav Werkzeuge or consult the team for application advice. GX16-2E300N03-GD6 WSM33S Turning indexable insert, Tiger‑tec Silver — Walter Tools The GX16-2E300N03-GD6 WSM33S is an indexable turning insert engineered for machining stainless steels and heat‑resistant superalloys, delivering robust edge stability and controlled chip formation in difficult‑to‑cut materials. Tiger‑tec Silver coating for high wear resistance WSM33S grade for tough‑to‑cut materials Reliable chip control and stable cutting edge Designed for stainless steel and superalloys Maximise process reliability when machining demanding alloys The combination of the Tiger‑tec Silver series and the WSM33S grade provides a coated carbide solution optimised for components that generate high temperatures and tend to work‑harden. This metallurgy and coating pairing reduces flank and crater wear, which translates directly into longer tool life and fewer tool changes on the shop floor. The insert’s geometry, identified by the 2E300N03‑GD6 chipbreaker designation, supports stable chip formation; this lowers the risk of built‑up edge and improves dimensional consistency during extended cuts. Overall, the specification is aimed at operations where maintaining cutting performance under thermal and mechanical load is essential. Improve throughput and surface quality with consistent performance A consistent cutting edge and reliable wear behaviour allow for higher average productivity and reduced rework. The grade’s resistance to abrasion and thermal degradation supports tighter process windows, helping to achieve repeatable surface finishes and secure tolerances. For production environments, that means fewer interruptions and steadier cycle times — an economic advantage for series production and small batch runs alike. The result is measurable efficiency: better uptime, reduced tooling consumption and improved output quality. Clear application fit and compatibility notes The insert is intended primarily for the ISO material groups M and S: stainless steels (M) and heat‑resistant superalloys and titanium (S). Depending on holder geometry and cutting parameters, the insert is suitable for a range of turning tasks from heavy cutting to finishing passes where edge stability is paramount. The geometry code aids selection: the chipbreaker supports consistent evacuation and controlled chip formation in adhesive or tough materials. For specialised toolholder pairing or parameter recommendations, Metav Werkzeuge can provide technical guidance to match insert, holder and process requirements. Contact Metav Werkzeuge for tailored application support and supply — Metav Werkzeuge can advise on tooling packages, compatible holders and cutting data to integrate the GX16‑2E300N03‑GD6 WSM33S into the production process efficiently. Technical data Article number: GX16-2E300N03-GD6-WSM33S-WALTER SKU: GX16-2E300N03-GD6-WSM33S-WALTER Product type: Turning indexable insert Manufacturer: Walter Tools ISO designation: GX16-2E300N03-GD6 WSM33S Facts Series: Tiger‑tec Silver Grade: WSM33S Chipbreaker code: 2E300N03-GD6 Special features Coated carbide substrate Suitable materials: stainless steels (M), superalloys and titanium (S) Optimised chip control and stable cutting edge Designed for heavy‑duty and heat‑generating turning applications FAQ Which materials is this insert suitable for? The GX16‑2E300N03‑GD6 WSM33S insert from Walter Tools is specified for ISO groups M and S — primarily stainless steels and heat‑resistant superalloys or titanium. What makes the WSM33S grade special? WSM33S is a coated carbide grade within the Tiger‑tec Silver series that emphasises thermal stability and edge robustness, supporting reliable chip formation and extended tool life in difficult‑to‑cut materials. Which chipbreaker and geometry does the insert use? The insert carries the chipbreaker code 2E300N03‑GD6, which is engineered for controlled chip evacuation and steady cutting behaviour under elevated temperatures and adhesive tendencies. Can this insert be used for finishing as well as roughing? Depending on the chosen toolholder and cutting parameters, the insert’s stable cutting edge permits both heavy cuts and finishing passes, with the specific application defined by the machining setup and feed/speed selection. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names mentioned are the property of their respective owners. The offered item is an original factory‑new product of the manufacturer.
GX16-2E300N03-UA4 WKP13S WKP13S Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Silver coating and the WKP13S grade provides improved wear resistance and stable cutting edges for machining steel and cast iron; combined with the optimised 2E300N03‑UA4 chipbreaker this ensures reliable chip control and consistent cycle times—order the insert directly via Metav Werkzeuge or consult their specialists for application details. GX16-2E300N03-UA4 WKP13S turning indexable insert — Tiger‑tec Silver coating, for steel and cast iron | Walter Tools GX16-2E300N03-UA4 WKP13S is a turning indexable insert designed for productive metalcutting where controlled chip formation and long tool life are required in steel and cast-iron applications Tiger-tec Silver coating for extended tool life Optimised 2E300N03-UA4 chipbreaker geometry Suitable for steel (P) and cast iron (K) Longer tool life for sustained productivity The combination of Tiger‑tec Silver coating and the WKP13S cutting grade gives enhanced wear resistance under the thermal and mechanical loads typical of steel and cast‑iron machining. The coating improves heat dissipation and reduces flank wear, which supports longer tool life and fewer index changes per shift. For production environments this translates into improved uptime and a reduced frequency of tool replenishment, delivering a measurable contribution to process economy. Predictable chip behaviour reduces interruptions The insert’s 2E300N03‑UA4 chipbreaker geometry is engineered to promote consistent chip formation when turning materials classified as P (steel) and K (cast iron). Reliable chip control reduces the risk of built‑up edge and machine stoppages, enabling steadier feeds and smoother surface finishes. This geometric optimisation supports more predictable cycle times and fewer manual interventions, helping maintain a stable machining flow across varying workpiece geometries. Consistent process security and straightforward integration The standardised designation GX16‑2E300N03‑UA4 allows simple identification and compatibility with holders designed for this insert form, aiding rapid tool changes and repeatable set‑ups. The coated carbide composition and the graded performance of WKP13S ensure consistent cutting behaviour over serial runs, supporting reproducible part quality. Technical data and compatibility specifications are available for planning tool inventories and verifying fixture fitment for specific turning operations. Contact Metav Werkzeuge for specification assistance and to source Tiger‑tec Silver WKP13S inserts through Metav Werkzeuge; technical consultants are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss suitable grades and holder compatibility Technical data Article number: GX16-2E300N03-UA4-WKP13S-WALTER Product type: Turning indexable insert Designation: GX16-2E300N03-UA4 WKP13S Series: Tiger-tec Silver Grade: WKP13S Manufacturer: Walter Tools Core specifications Chipbreaker: 2E300N03-UA4 Material group: P / K Material composition: coated carbide Application: Steel (P), Cast iron (K) Special features Coating technology: Tiger‑tec Silver Cut type: Indexable turning insert Typical use: Controlled chip formation and extended tool life ISO-related designation available in catalogue data FAQ Which materials is this insert intended for? The GX16-2E300N03‑UA4 WKP13S insert from Walter Tools is specified for machining materials in groups P (steel) and K (cast iron) according to ISO material groupings. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP13S grade enhances thermal stability and wear resistance, supporting longer tool life and more consistent cutting performance in steel and cast‑iron operations. What does the 2E300N03‑UA4 chipbreaker achieve? The 2E300N03‑UA4 chipbreaker is designed for consistent chip control in P and K group materials, helping to reduce machine interruptions and improve surface quality. How is the insert identified for holder compatibility? Identification is via the designation GX16‑2E300N03‑UA4 WKP13S and SKU GX16-2E300N03-UA4-WKP13S-WALTER; holders that accept this insert designation ensure proper fit and clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX16-2E300N03-UA4 WKP33S WKP33S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver technology and the WKP33S grade to secure longer tool life and consistent chip control for productive turning of steel and cast iron; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. GX16-2E300N03-UA4 WKP33S turning insert — Tiger·tec Silver for steel and cast iron by Walter Tools The GX16-2E300N03-UA4 WKP33S is a coated indexable turning insert designed for productive machining of steel (P) and cast iron (K), combining a robust cutting geometry with Walter Tools' Tiger·tec Silver technology. Tiger·tec Silver coating for extended life WKP33S grade for a stable cutting edge Optimised chip control (2E300N03-UA4) Suited to steel (P) and cast iron (K) Greater throughput with predictable tool life The combination of the Tiger·tec Silver coating and the WKP33S grade delivers a higher resistance to abrasive and thermal wear, which translates into longer tool life and fewer index changes. Coated carbide substrates in this series are engineered to handle the heat and deformation typical of turning operations on unalloyed and alloyed steel, meaning machining cycles remain stable under higher cutting speeds. The result is measurable productivity gains and lower per-part tooling costs thanks to reduced downtime and consistent removal rates. Reliable chip formation for fewer interruptions The 2E300N03-UA4 chipbreaker geometry is optimised for controlled chip formation when machining both steel and cast iron, reducing the risk of long, tangled swarf and minimising secondary operations. Improved chip control supports uninterrupted production runs and safer handling at the machine, while the insert chemistry and coating combination mitigate adhesive and abrasive wear mechanisms. For operations where consistent surface finish and cycle time stability are essential, this insert class offers a dependable solution. Consistent surface quality and process security A stable cutting edge and tailored coating behaviour ensure repeatable surface finishes and dimensional consistency part-to-part. The coated insert design supports reliable edge retention and contributes to constant results across batches, which is particularly valuable in series production or when machining components with tight tolerances. By selecting this insert type from Walter Tools' Tiger·tec Silver line, a workshop gains a balance of productivity and process security that reduces rework and supports predictable scheduling. Contact Metav Werkzeuge for technical advice and ordering of Walter Tools Tiger·tec Silver GX16-2E300N03-UA4 WKP33S inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX16-2E300N03-UA4-WKP33S-WALTER Product: Drehwendeschneidplatte / turning insert GX16-2E300N03-UA4 WKP33S Walter Tools Series: Tiger·tec Silver Facts Grade: WKP33S Chipbreaker: 2E300N03-UA4 Material groups (ISO): P, K Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Suitable materials: Steel (P), Cast iron (K) Application focus: productive turning with optimised chip control FAQ What materials is this insert intended for? The Walter Tools GX16-2E300N03-UA4 WKP33S insert is designed primarily for steel (ISO group P) and cast iron (ISO group K), offering a balance between heat resistance and abrasive-wear performance. What does the WKP33S grade mean for machining? WKP33S is a Walter Tools carbide grade within the Tiger·tec Silver family that provides a coated surface for improved wear resistance and stable cutting-edge behaviour during continuous turning operations. How does the 2E300N03-UA4 chipbreaker affect productivity? The 2E300N03-UA4 chipbreaker is engineered to produce short, controllable chips in turning processes, which reduces interruptions, improves handling, and supports longer uninterrupted production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
GX16-2E300N03-UD4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide performance, reliable chip control, and broad material suitability for efficient production turning. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice and availability. GX16-2E300N03-UD4 WKP23S Turning insert — Tiger·tec Silver, Walter Tools The GX16-2E300N03-UD4 WKP23S is an indexable turning insert designed for productive machining of steel and cast iron, offering a coated carbide grade optimised for stable chip formation and long tool life. Tiger·tec Silver coating technology WKP23S coated carbide grade Designed for steel and cast iron Precise chip control with UD4 geometry Maximise productivity in steel and cast-iron turning The Tiger·tec Silver coating combined with the WKP23S grade provides a balance of wear resistance and toughness that favours continuous production runs. The insert’s coated carbide construction reduces adhesive and abrasive wear during typical turning operations on steel and cast iron, which supports longer intervals between tool changes and more predictable component quality. For workshop managers and CNC operators, this translates into higher uptime and consistent surface finish without complex process adjustments. Predictable chip control and reliable edge security The chipbreaker geometry 2E300N03-UD4 is crafted to promote controlled chip formation and efficient evacuation. Controlled chips lower the risk of part damage and tool collisions, simplifying downstream handling and improving cycle-time reliability. The insert’s geometry and coating work together to maintain a robust cutting edge under fluctuating cutting forces, which is particularly useful when moving between roughing and semi-finishing passes in medium- to high-feed turning. Practical fit for production and job-shop environments As a medium- to high-performance indexable insert, this grade suits a wide range of turning applications where consistent results are required. The combination of coating technology and chip control makes the component suitable for continuous production and mixed-batch work typical in job shops and subcontractors. The technical design aims to reduce variability in wear patterns, helping to streamline reconditioning intervals and tool inventory planning. Clear technical advantages for process engineers The insert’s classification for ISO material groups P (steel) and K (cast iron) indicates targeted performance in those material families; the coating strategy mitigates temperature-related edge degradation in steel and counters abrasive wear in cast iron. This makes the insert a pragmatic choice where a single grade is preferred for mixed material workflows, avoiding frequent grade changes while maintaining process security. For high-demand turning tasks rely on Walter Tools’ Tiger·tec Silver inserts — contact Metav Werkzeuge for stock checks, technical consultation, or to discuss application-specific recommendations. Technical data Article number: GX16-2E300N03-UD4-WKP23S-WALTER Designation: GX16-2E300N03-UD4 WKP23S Product type: Turning insert (indexable) Facts Series: Tiger·tec Silver Grade: WKP23S Chipbreaker/geometry: 2E300N03-UD4 Material compatibility: P / K Special features Coating: Tiger·tec Silver (coated carbide) Typical applications: Steel and cast iron turning Manufacturer: Walter Tools FAQ What materials is this insert designed for? The insert is specified for ISO groups P (steel) and K (cast iron); the WKP23S grade and Tiger·tec Silver coating optimise performance for these materials. How does the UD4 chipbreaker benefit machining? The 2E300N03-UD4 chipbreaker promotes controlled chip formation and efficient evacuation, reducing the likelihood of chip-related interruptions and supporting stable cycle times. Is this insert suitable for continuous production runs? Yes, the coated carbide grade and robust geometry are engineered for productive, repeatable machining, offering predictable wear behaviour suited to continuous production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX16-2E300N03-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coated carbide grade WSM33S combined with the proven 2E300N03-UD4 chipbreaker to secure stable edges and consistent chip control when machining stainless steels and heat‑resistant superalloys. Order the GX16‑2E300N03‑UD4 WSM33S directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. GX16-2E300N03-UD4 WSM33S indexable turning insert — Tiger·tec Silver coated carbide, for stainless steel and superalloys (Walter Tools) GX16-2E300N03-UD4 WSM33S is an indexable turning insert optimised for demanding cuts in tough materials, offering thermal stability and reliable edge life Tiger·tec Silver coating for high thermal stability Coated carbide grade WSM33S for tough materials Optimised chip control with 2E300N03-UD4 breaker Reliable edge stability for stainless and superalloys Increase throughput with a thermally stable coated carbide The Tiger·tec Silver coating combined with the WSM33S grade provides enhanced resistance to heat and abrasive wear, which translates into longer tool life and fewer tool changes. Coated carbide means a hard substrate with a thin, wear‑resistant layer that reduces friction and improves surface finish; this is especially beneficial when machining stainless steel, where high temperatures and built‑up edge are common. The result is a more consistent process, reduced downtime and improved component quality. Secure chip formation and minimise interruptions The geometry identified as 2E300N03‑UD4 acts as a controlled chipbreaker, producing short, predictable chips even when cutting materials classified under ISO group M and S. Predictable chip formation reduces the risk of tangling and tool damage, supporting uninterrupted production cycles. With a stable cutting edge and optimised chip control, the insert helps maintain surface integrity and lowers rework rates, offering a clear advantage for batch and continuous operations. Suitable for high‑demand materials with clear application guidance Designed for materials that challenge conventional grades, the insert is suitable for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), where thermal resistance and edge stability are decisive. For roughing operations a robust engagement and moderate cutting speeds are advisable; for finishing, reduced depth of cut and stable feed maintain surface quality. If further application parameters are required, Metav Werkzeuge provides process recommendations and cutting data to align the insert with specific machine and holder combinations. Easy integration and predictable performance in production The insert designation follows standard indexable dimensions and fits common toolholders for turning, enabling straightforward replacement and indexing during scheduled maintenance. The coated grade and chipbreaker combination are formulated to deliver reliable repeatability across serial production, supporting lean workflows and cost‑effective machining. Where tool life and consistent part quality are priorities, this solution offers measurable improvements in overall process stability. Contact Metav Werkzeuge to discuss how the Walter Tools Tiger·tec Silver WSM33S inserts can be integrated into the production line and to receive tailored cutting data from our application experts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX16-2E300N03-UD4-WSM33S-WALTER Designation: GX16-2E300N03-UD4 WSM33S Type: Indexable turning insert Manufacturer: Walter Tools Grade/series: Tiger·tec Silver (WSM33S) Facts Material groups: S / M Suitable for: stainless steel (ISO M) Suitable for: heat‑resistant superalloys / titanium (ISO S) Chipbreaker: 2E300N03‑UD4 Special features Coated carbide grade WSM33S Tiger·tec Silver coating technology Optimised chip formation and edge stability Intended for demanding turning in tough materials FAQ What materials is this insert designed to machine? The GX16‑2E300N03‑UD4 WSM33S insert is formulated for stainless steel (ISO M) and heat‑resistant superalloys/titanium (ISO S), offering thermal resistance and stable cutting edges. What advantages does the Tiger·tec Silver coating deliver? Tiger·tec Silver on the WSM33S grade provides improved thermal stability and reduced abrasive wear, which helps to extend tool life and maintain surface finish under high thermal load. How does the 2E300N03‑UD4 chipbreaker affect machining? The 2E300N03‑UD4 geometry produces short, controllable chips that lower the risk of chip tangling and tool interruptions, improving process reliability in serial production. Is the insert suitable for finishing operations? Yes — with appropriate cutting parameters the insert provides a fine surface quality; for finishing use lower depths of cut and stable feed to exploit the insert’s edge stability. Can the insert be indexed and reused? The insert is indexable and designed for multiple orientations; indexing reduces the frequency of complete tool replacements and supports predictable tool life. Hersteller: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and operates within the Sandvik Group. Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used for explanation only; there is no corporate connection implied between Metav Werkzeuge and the named manufacturers. The offered item is original, brand‑new merchandise from the manufacturer.
GX16-2E300N03-UF4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a proven geometry for stable chip control to improve uptime and reduce tooling costs; order directly via Metav Werkzeuge or consult our technical team for application support. GX16-2E300N03-UF4 WKP23S indexable turning insert — Tiger·tec Silver for steel and cast iron (Walter Tools) The GX16-2E300N03-UF4 WKP23S is an indexable turning insert engineered for high-productivity turning of steel and cast iron, combining a robust coated grade with an optimised chipformer for consistent results in series production Tiger·tec Silver coating for longer tool life Optimised chipformer for stable chip control Designed for steel and cast iron machining Coated cemented carbide with high wear resistance Longer tool life for fewer interruptions The combination of a coated cemented carbide substrate and Tiger·tec Silver technology delivers a significant increase in wear resistance, reducing the frequency of insert changes and the associated setup time. The coating system is engineered to withstand the thermal and mechanical loads typical when machining ISO P materials (various steels), so production runs remain consistent. By reducing unscheduled downtime and tool consumption, the insert supports a measurable improvement in overall tool cost per component and a steadier production flow. Consistent chip control for safer machining An optimised chipformer geometry (UF4) ensures predictable chip breakage and evacuation when cutting both steels and cast irons, minimising the risk of entanglement and surface damage. The insert design focuses on controlled fragmentation of swarf, which is particularly valuable in automated or high-feed operations where reliable chip flow impacts cycle time. This leads to fewer process interruptions and a steadier surface finish, supporting efficient machining sequences on modern turning centres. Broad application scope with simplified tool management Belonging to the Tiger·tec Silver series and graded WKP23S, the insert suits common workshop demands across ISO P and K groups — in other words, for machining a wide range of steel grades and cast iron compositions. The standardised geometry GX16 facilitates inventory management, allowing toolrooms to consolidate insert types while covering multiple jobs. Combined with Walter Tools’ focus on stable edge quality and repeatability, this solution supports both single-shift and continuous production environments that value predictable results. For high-productivity turning with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX16-2E300N03-UF4-WKP23S-WALTER Article designation: GX16-2E300N03-UF4 WKP23S Type: indexable turning insert Brand: Walter Tools Grade: WKP23S Series: Tiger·tec Silver Application: ISO P (steel), ISO K (cast iron) Core data ISO designation: GX16-2E300N03-UF4 WKP23S Geometry code: 2E300N03-UF4 Material group: P / K Special features Coating technology: Tiger·tec Silver Coated cemented carbide Optimised chipformer for stable chip control Suitable for steel and cast iron machining Stable chip formation and reliable cutting edge FAQ Which materials can be machined with this insert? The GX16-2E300N03-UF4 WKP23S is suitable for ISO P (steel) and ISO K (cast iron) applications, reflecting the WKP23S grade design for these workpiece families. What does the Tiger·tec Silver series provide? Tiger·tec Silver offers a coated carbide system optimised for wear resistance and thermal stability, supporting longer tool life and consistent performance under typical turning conditions. Is the insert compatible with standard GX16-style toolholders? The insert follows the GX16 designation; it is intended for toolholders that accept GX16 geometry inserts. Verification with the chosen toolholder is recommended before mounting. How does the UF4 chipformer benefit machining? The UF4 chipformer promotes controlled chip breakage and evacuation, reducing the risk of entanglement and enabling steadier surface quality during continuous or automated turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and trade descriptions are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and Walter Tools. The offered article is an original, factory-new product of the manufacturer.
GX16-2E300N03-UF4 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the robust WSM23S grade for reliable chip control and extended tool life; this insert delivers stable cutting edges for demanding turning operations and reduces unplanned downtime. Order or request application advice through Metav Werkzeuge for tailored recommendations and fast, professional handling. GX16-2E300N03-UF4 WSM23S – indexable turning insert for stainless steels and superalloys (Walter Tools) The GX16-2E300N03-UF4 WSM23S is an indexable turning insert engineered for hard-to-machine materials, offering enhanced heat resistance and stable chip formation for productive turning operations. Tiger‑tec Silver coating for heat resistance Optimised for stainless steel and superalloys Stable cutting edge and secure chip control Consistent performance where heat and toughness meet The coated carbide composition, represented by the WSM23S grade, is designed for machining stainless steels and heat-resistant superalloys. The Tiger‑tec Silver coating improves thermal stability and wear resistance, which in practice means fewer tool changes and more predictable production cycles. For workshops seeking to maintain high throughput, this grade helps secure a consistent cutting edge under elevated temperatures and difficult cutting conditions, translating into lower process variability and improved component quality. Designed for reliable chip formation and edge stability ISO material groups M and S denote the insert’s suitability for stainless steels and heat-resistant superalloys respectively; these materials tend to be tough and generate heat at the cutting zone. The insert’s geometry and chipbreaker (2E300N03‑UF4) promote secure chip formation, reducing the risk of built-up edge and erratic chips. In plain terms, the geometry controls chip flow to protect the cutting edge, which supports longer service life and steadier surface finish during turning tasks. Productivity gains through predictable tool life A coated, grade-optimised insert like this supports higher process reliability and more stable cycle times. Improved wear resistance of the Tiger‑tec Silver technology extends effective cutting intervals, helping to reduce stoppages for tool change and inspection. For production environments where repeatability and uptime matter, the combination of grade and chip control contributes to lower unit machining costs and a smoother production flow without sacrificing part integrity. Practical integration and workshop guidance The designation code (GX16‑2E300N03‑UF4) identifies the insert geometry and chipbreaker; matching this insert with an appropriate toolholder and cutting parameters is key to realise the benefits. Trial cuts with adjusted feeds and speeds are recommended to find the optimal balance between surface finish and tool life. When fitted correctly, the indexable insert supports a wide range of turning tasks in small-batch and continuous production alike, especially where machining of stainless steels and superalloys is routine. For tailored application support or to secure the GX16-2E300N03-UF4 WSM23S from Walter Tools, contact Metav Werkzeuge for expert advice and efficient supply coordination Technical data SKU: GX16-2E300N03-UF4-WSM23S-WALTER Designation: GX16-2E300N03-UF4 WSM23S Series: Tiger‑tec Silver Facts Material groups: S / M Material application: stainless steels and superalloys Special features Coating: Tiger‑tec Silver Grade: WSM23S Chipbreaker: 2E300N03-UF4 Type: Indexable turning insert FAQ What materials is this insert suitable for? The GX16-2E300N03-UF4 WSM23S is suitable for stainless steels (ISO group M) and heat-resistant superalloys (ISO group S), offering the wear resistance required for these demanding materials. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WSM23S grade enhances thermal stability and wear resistance, which helps maintain a stable cutting edge and extends effective tool life during turning. Which chipbreaker does the insert use and why does it matter? This insert uses the 2E300N03‑UF4 chipbreaker; the specified geometry improves chip control and reduces the risk of built-up edge, supporting consistent surface quality. Is the insert aimed more at roughing or finishing operations? Depending on toolholder choice and cutting parameters, the insert can be applied for both roughing and finishing; the chipbreaker and grade combination balances material removal with edge stability for versatile turning tasks. How should the insert be integrated into a tooling system? Match the GX16-2E300N03‑UF4 WSM23S with a compatible Walter Tools turning holder and begin with conservative feeds and speeds, then adjust to achieve the desired surface finish and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and Walter Tools; the offered item is original, brand-new goods from the manufacturer.
GX16-2E300N03-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating, the WSM33S grade and the 2E300N03‑UF4 geometry for secure chip control and extended edge life; order directly via Metav Werkzeuge or consult our specialists for application guidance. GX16-2E300N03-UF4 WSM33S – indexable turning insert, Tiger‑tec Silver for rostfreier Stahl and superalloys · Walter Tools GX16-2E300N03-UF4 WSM33S is an indexable turning insert engineered for productive machining of hard-to-machine materials, with a focus on rostfreier Stahl and heat‑resistant superalloys Tiger‑tec Silver coating for thermal stability WSM33S grade for tough, heat‑resistant materials Geometry 2E300N03‑UF4 for reliable chip control Robust cutting edge for predictable tool life Boosted productivity when machining tough alloys The Tiger‑tec Silver coating in combination with the WSM33S grade delivers enhanced thermal resistance and reliable wear behaviour in demanding turning operations. For production environments facing long contact times with the workpiece, this combination reduces the risk of premature edge breakdown and supports sustained cutting speeds. The result is higher process stability and a lower frequency of index changes, which contributes directly to improved throughput and economic efficiency in serial turning applications. More consistent surface quality and longer edge life A coated carbide substrate and a carefully balanced grade ensure a stable cutting edge that resists adhesive wear and crater formation under elevated temperatures. This promotes reproducible workpiece surfaces and reduces secondary operations. By favouring a cutting geometry that maintains edge strength, the insert helps to extend tool life and reduce the total cost per component, making it a pragmatic choice for industrial workshops handling demanding batches. Controlled chips, fewer interruptions The 2E300N03‑UF4 chipbreaker is designed for dependable chip control when machining materials that tend to produce long or stringy chips. Better chip formation minimises tool interference and machine stoppages, supporting uninterrupted cycles and safer operation. Clear chip evacuation also eases handling in automated cells and reduces the likelihood of rework due to entangled chips or surface blemishes. Seamless integration into production processes As a product from Walter Tools, this insert is suitable for integration into established tool holders and turning programmes where repeatability and predictability are priorities. The grade and geometry are chosen to match the needs of rostfreier Stahl and heat‑resistant superalloys, so process engineers can rely on stable cutting behaviour without extensive trial-and-error. Application specialists can support tool selection and cutting parameters to ensure optimal performance in specific machining scenarios. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX16-2E300N03-UF4-WSM33S-WALTER Name: Drehwendeschneidplatte GX16-2E300N03-UF4 WSM33S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data ISO groups: M, S Geometry / chipbreaker: 2E300N03‑UF4 Applicable material: rostfreier Stahl: yes Special features Grade: WSM33S Coating technology: Tiger‑tec Silver Substrate: coated carbide Recommended for hard-to-machine materials and, depending on geometry, rostfreier Stahl FAQ What materials is the GX16-2E300N03-UF4 WSM33S suited for? This Walter Tools turning insert is specified for ISO groups M and S, making it suitable for rostfreier Stahl and heat‑resistant superalloys. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal resistance and wear protection, which helps the insert maintain a stable cutting edge under elevated temperatures and long engagement times. What is the role of the 2E300N03‑UF4 geometry? The 2E300N03‑UF4 chipbreaker is engineered for reliable chip control, reducing interruptions and improving safety in automated and manual turning operations. Is this insert compatible with common tool holders? The insert follows standard indexable turning conventions and can be integrated into compatible holders; selection should be verified against holder specifications and application parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer.
GX16-2E300N03-UF4 WSM43S WSM43S Wendeplatten - Walter Tools
Benefit from optimised machining of stainless steels and heat‑resistant superalloys through the combination of a Tiger‑tec Silver coating and the robust WSM43S carbide grade; increased process stability and predictable tool life support efficient turning operations. Order the GX16-2E300N03‑UF4 WSM43S directly via Metav Werkzeuge or ask our consultants if needed Drehwendeschneidplatte GX16-2E300N03‑UF4 WSM43S – Tiger‑tec Silver for stainless steels and superalloys (Walter Tools) The Drehwendeschneidplatte GX16-2E300N03‑UF4 WSM43S is a coated carbide insert designed for demanding turning tasks on stainless steels and heat‑resistant superalloys, offering enhanced edge stability and secure chip control Tiger‑tec Silver coating for edge stability Optimised for stainless steels and superalloys Coated carbide grade WSM43S for long tool life Consistent process security for demanding materials The Tiger‑tec Silver series delivers reliable cutting performance where heat generation and built‑up edge are critical. Through a combination of coating technology and a tailored carbide substrate, the insert ensures stable cutting edges when machining tough, adhesive materials. For suppliers and production shops working with stainless steels or high‑temperature alloys, this stability translates into fewer interruptions, more predictable cycle times and lower rework rates. The design emphasises repeatable performance under thermal stress and supports industrial production targets for uptime and part quality. Coating and grade engineered to extend tool life The WSM43S grade, part of the Tiger‑tec Silver family, pairs a coating system with a wear‑resistant carbide base to resist abrasion and thermal softening. This combination improves resistance to both gradual flank wear and sudden edge breakdown, allowing more aggressive feed and speed strategies without sacrificing component surface finish. Reduced flank wear and improved edge retention mean extended tool life and fewer insert changes, which positively affects overall throughput and cost efficiency in the turning cell. Predictable chip control and machining outcomes The 2E300N03‑UF4 chipformer geometry is optimised for secure chip formation on sticky and temperature‑sensitive materials, supporting controlled evacuation and minimising the risk of chip entanglement. Controlled chipflow protects the cutting edge and the workpiece surface, enabling consistent dimensional accuracy and surface integrity. In practice, this leads to stable cycle times and lower scrap rates, particularly when processing long or complex turning operations. Practical benefits for workshop and production planning Adopting inserts from the Tiger‑tec Silver range with the WSM43S grade simplifies process development: the combination of coating, substrate and chipforming geometry reduces tuning iterations and eases tool selection for similar jobs. Suppliers can expect improved first‑pass yields and more consistent surface finishes, which supports downstream processes and customer satisfaction. The insert is suitable for integration into standard turning toolholders and is aligned with industrial expectations for predictable performance. Contact Metav Werkzeuge for tailored machining advice and to request technical documentation – info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number/SKU: GX16-2E300N03‑UF4-WSM43S-WALTER Product type: Drehwendeschneidplatte ISO designation: GX16-2E300N03‑UF4 WSM43S Facts Material group: S / M Manufacturer: Walter Tools Series: Tiger‑tec Silver Special features Grade: WSM43S (coated carbide) Chipformer: 2E300N03‑UF4 Suitable for: stainless steels, superalloys FAQ Which materials are best suited for this insert? The GX16-2E300N03‑UF4 WSM43S is specifically optimised for stainless steels (M) and heat‑resistant superalloys/titanium (S), offering improved edge stability and chip control on these groups. How does the Tiger‑tec Silver coating benefit machining? Tiger‑tec Silver provides thermal resistance and reduced friction at the cutting edge, which helps the WSM43S grade maintain geometry and surface finish during continuous and high‑temperature turning operations. What performance gains can be expected in production? Using this insert typically results in more predictable tool life, fewer insert changes and consistent component quality, leading to higher throughput and reduced rework. Is the chipformer suitable for long turning cycles? Yes, the 2E300N03‑UF4 chipformer is designed to produce controlled chips on adhesive or heat‑prone materials, supporting stable evacuation over extended cycle times. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
GX16-2E300N15-RD4 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM23S grade for reliable cutting in demanding materials; the insert offers stable chip control and durable cutting edges for a smooth production flow. Order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. GX16-2E300N15-RD4 WSM23S turning insert — Tiger‑tec Silver, Walter Tools GX16-2E300N15-RD4 WSM23S is a coated carbide turning insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys Tiger‑tec Silver coating for thermal stability WSM23S grade for stable cutting edges Geometry 2E300N15‑RD4 for controlled chip formation Designed for rostfreier Stahl and superalloys Predictable cutting in tough materials The GX16-2E300N15-RD4 WSM23S insert combines a modern coated‑carbide grade with a chipformer geometry that supports consistent chip control and reduced built‑up edge when machining rostfreier Stahl and similar difficult‑to‑cut alloys. The Tiger‑tec Silver technology improves heat resistance at the cutting zone, which helps to maintain edge stability during longer cutting passes. Explaining the terminology: the WSM23S designation denotes a coated hardmetal grade optimised for high thermal load and edge robustness, while the 2E300N15‑RD4 geometry relates to the insert’s chipbreaker profile and edge preparation for secure chip evacuation. Longer tool life and stable processes Using a wear‑resistant coated grade translates into fewer interruptions and more predictable tool changes, supporting higher machine utilisation and reduced overall process costs. The alloy‑focused design of this insert prioritises edge integrity under thermal and mechanical stress, which means less flank wear and a steadier surface finish over component batches. The combination of coating and geometry minimises the risk of premature edge failure, making this insert suitable for both repeatable production runs and demanding single‑pass operations where process security is essential. Versatile application and machining advantages This turning insert is suitable where machining demands include rostfreier Stahl, heat‑resistant superalloys and titanium; depending on the chosen geometry, it can also be applied for certain stainless finishing operations. The chipbreaker 2E300N15‑RD4 supports stable chip form and easy evacuation in medium to heavy cuts, improving cycle reliability. For workshop planners and production engineers, the insert reduces the need for constant parameter adjustments because the grade is tuned to cope with adhesion tendencies and thermal load commonly encountered with these materials. For specific cutting data and optimal parameter windows, Metav Werkzeuge can provide tailored recommendations. Contact Metav Werkzeuge for application advice and to secure genuine Walter Tools Tiger‑tec Silver inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: GX16-2E300N15-RD4-WSM23S-WALTER Designation: GX16-2E300N15-RD4 Insert designation: GX16-2E300N15-RD4 WSM23S Type: Drehwendeschneidplatte / turning insert Grade: WSM23S Series: Tiger‑tec Silver Chipformer: 2E300N15-RD4 Material groups: S / M Manufacturer: Walter Tools Core data Geometry code: 2E300N15-RD4 Series code: Tiger‑tec Silver Grade code: WSM23S Applicable material groups: S, M Special features Coated hardmetal Optimised for rostfreier Stahl and heat‑resistant superalloys Stable chip formation and edge stability Suitable for heavy‑duty and high thermal load machining FAQ Which materials is this insert suitable for? The GX16-2E300N15-RD4 WSM23S turning insert from Walter Tools is designed for machining rostfreier Stahl and heat‑resistant superalloys, with robustness for high thermal loads. Is the WSM23S a coated grade? Yes, WSM23S is a coated hardmetal grade in the Tiger‑tec Silver family, engineered for improved thermal resistance and wear behaviour. What does the chipformer 2E300N15‑RD4 provide? The 2E300N15‑RD4 chipformer geometry supports controlled chip breaking and evacuation, improving process stability during medium to heavy cuts. For which machining tasks is this insert recommended? This insert is recommended for demanding turning operations where edge stability and heat resistance are critical, particularly continuous or heavy cuts in rostfreier Stahl and superalloys. Can this insert reduce tooling change frequency? When applied with matching cutting parameters, the Tiger‑tec Silver WSM23S grade helps to extend tool life and reduce unplanned changes, leading to more predictable production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
GX16-2E300N15-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM33S grade for reliable machining of stainless steels and heat‑resistant superalloys; the result is improved process security and stable chip formation. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. GX16-2E300N15-RD4 WSM33S – Indexable turning insert, coated carbide for stainless steels and superalloys — Walter Tools The GX16-2E300N15-RD4 WSM33S indexable turning insert is a coated carbide grade from Walter Tools’ Tiger‑tec Silver series, engineered for demanding turning of rostfreie Stähle (stainless steels) and heat‑resistant superalloys. Tiger‑tec Silver coating for high heat resistance WSM33S grade optimised for stainless and superalloys Coated carbide for stable cutting‑edge performance Designed for secure chip formation and productivity Longer tool life through thermal stability and coating technology The Tiger‑tec Silver technology delivers enhanced thermal resistance and wear control compared with uncoated grades, which translates into longer tool life and fewer tool changes on the shop floor. The combination of a coated carbide substrate and a tailored grade such as WSM33S supports steady cutting under elevated temperatures, reducing the risk of edge breakdown during continuous cuts. This stability helps maintain consistent cycle times and lowers overall machining costs by limiting unscheduled downtime. Reliable machining of stainless steels and superalloys with controlled chip formation Materials classified under ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium) present specific challenges: high toughness, tendency to build up on the edge and poor heat conduction. The WSM33S grade addresses these by promoting secure chip formation and a robust cutting edge, while the chipbreaker geometry (2E300N15‑RD4) aids evacuation of formed chips. As a result, surface finish and dimensional stability are easier to achieve when machining difficult-to-cut alloys. Process security and productivity benefits for production environments Using a grade optimised for demanding alloys improves process security and repeatability, both critical in series production and precision turning operations. The insert’s design supports predictable wear behaviour and consistent cutting performance, which simplifies tool selection and reduces the need for frequent requalification of processes. Integration into existing indexable tooling systems is straightforward where the GX16‑designation is supported, enabling quick retrofits and minimal setup changes. Contact Metav Werkzeuge for application-specific recommendations and fast supply of Walter Tools GX16-2E300N15-RD4 WSM33S inserts Technical data Article number: GX16-2E300N15-RD4-WSM33S-WALTER Label: Drehwendeschneidplatte GX16-2E300N15-RD4 WSM33S Walter Tools Product type: Indexable turning insert Facts Grade: WSM33S Series: Tiger‑tec Silver Chipbreaker: 2E300N15‑RD4 Material groups: S / M Special features Coated carbide Suitable for stainless steels and heat‑resistant superalloys (ISO M, S) Optimised for stable chip formation and cutting‑edge strength Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The GX16-2E300N15-RD4 WSM33S insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S) and is therefore suitable for demanding turning applications. What does the WSM33S grade deliver in practice? WSM33S, part of the Tiger‑tec Silver family, provides enhanced thermal resistance and wear control, helping to maintain a stable cutting edge and consistent chip formation during extended cutting operations. How does the chipbreaker 2E300N15‑RD4 influence machining? The chipbreaker geometry assists in controlled chip formation and evacuation; in combination with the WSM33S grade, it supports reliable machining of tough materials and helps achieve consistent surface quality. Is this insert compatible with standard indexable turning toolholders? The insert follows the GX16 designation; compatibility requires a toolholder that accepts GX16‑type inserts and the specific chipbreaker shape 2E300N15‑RD4 for correct seating and clamping. Can the grade improve process repeatability in series production? Yes, the Tiger‑tec Silver WSM33S grade is formulated for predictable wear behaviour and improved process security, which supports repeatable results in batch or series manufacturing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
GX16-2E300N15-RF8 WSM13S WSM13S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WSM13S carbide grade for secure chip control and extended tool life in demanding turning operations; order or request further application support via Metav Werkzeuge for tailored recommendations. GX16-2E300N15-RF8 WSM13S turning indexable insert — high thermal resistance for rostfreier Stahl and superalloys (Walter Tools) GX16-2E300N15-RF8 WSM13S is a turning indexable insert designed for heavy cutting of hard-to-machine alloys and, depending on geometry, rostfreier Stahl Tiger·tec Silver coating for thermal stability WSM13S grade for secure chip control Optimised edge for rostfreier Stahl and superalloys Robust carbide substrate for extended tool life Maximum process reliability through thermal stability The insert’s Tiger·tec Silver coating combines high-temperature resistance with a fine, wear-resistant surface, which significantly improves performance when machining heat-prone materials. For components made of rostfreier Stahl or nickel-based superalloys, this thermal protection reduces flank and crater wear, enabling more consistent tool life and fewer unplanned tool changes. The result is a measurable increase in process stability and predictable production output when using this class of turning insert. Predictable chip formation and improved surface finish The WSM13S grade is formulated to promote secure chip control under challenging cutting conditions. With the specified geometry 2E300N15-RF8, the insert supports stable chip breaking and evacuation, lowering the risk of built-up edge and surface defects. This stabilised chip behaviour translates into fewer interruptions, higher first-pass quality and reduced rework, which benefits both batch production and single-part precision work where dimensional repeatability matters. Efficient cutting performance for demanding materials Designed for the S and M ISO material groups, the insert excels when machining heat-resistant superalloys and, depending on toolholder and parameters, rostfreier Stahl. The combination of a robust carbide substrate and a tailored coating achieves an effective balance between edge strength and thermal resistance. For production environments where cycle time and tool-life economy are critical, this insert offers a practical route to higher productivity without compromising component integrity. For Walter Tools applications requiring Tiger·tec Silver performance, contact Metav Werkzeuge for tailored toolholder compatibility and cutting-parameter advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: GX16-2E300N15-RF8-WSM13S-WALTER Article designation: GX16-2E300N15-RF8 WSM13S Product type: Turning indexable insert Core Technical Data Grade/Sort: WSM13S Series: Tiger·tec Silver Insert geometry: 2E300N15-RF8 Material groups: S / M Features / Special characteristics Coating: Tiger·tec Silver (coated carbide) Application: Heavy-duty machining; depending on geometry, rostfreier Stahl Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The GX16-2E300N15-RF8 WSM13S insert is suitable for ISO groups S and M, meaning it is intended for heat-resistant superalloys and, depending on geometry and parameters, rostfreier Stahl. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM13S grade increases thermal resistance and wear protection, which helps maintain a stable cutting edge and consistent tool life under elevated temperatures. What does the geometry code 2E300N15-RF8 indicate? The code denotes the insert’s specific geometry and chipbreaking characteristics; 2E300N15-RF8 is optimised for secure chip formation and effective evacuation in demanding turning tasks. Is this insert compatible with standard toolholders? Compatibility depends on matching the insert geometry and clamping system; the GX16-2E300N15-RF8 WSM13S insert fits holders designed for its ISO geometry designation and is commonly used in industrial turning tool assemblies. Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
GX16-2E300N15-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, stable cutting-edge performance and broad material coverage for reliable, productive turning. Order the insert directly via Metav Werkzeuge or consult their technical advisors for application-specific cutting data. GX16-2E300N15-RF8 WSM23S – Walter Tools indexable turning insert, Tiger·tec Silver coating, for rostfreier Stahl and superalloys The GX16-2E300N15-RF8 WSM23S is an indexable turning insert engineered for productive machining of rostfreier Stahl and heat-resistant superalloys, offering a coated-carbide grade optimised for secure chip control in demanding cuts. Tiger·tec Silver coating for improved heat resistance WSM23S grade for tough rostfreier Stahl and superalloys Stable cutting edge for productive roughing Geometry 2E300N15‑RF8 for controlled chip formation High-temperature strength for demanding alloys and rostfreier Stahl The combination of the Tiger·tec Silver coating and the WSM23S grade gives this insert a pronounced resistance to thermal loading and edge degradation. Coated carbide technology provides a protective layer that reduces adhesive wear and supports consistent cutting-edge stability when machining materials that generate high temperatures and work hardening. This results in longer in‑service life of the insert and fewer indexings during series production, which directly improves process efficiency and reduces downtime. Predictable chip control and edge security with dedicated geometry The insert’s geometry, designated 2E300N15‑RF8, is designed to promote reliable chip formation and evacuation under varying cutting conditions. A stable cutting edge and optimised chipbreaker form mean less risk of built-up edge and more consistent surface finish on components made from rostfreier Stahl or nickel‑based superalloys. For production environments where repeatability and surface integrity matter, the controlled chip behaviour contributes to steady cycle times and reduced rework. Application guidance and process benefits for workshop and production This grade is intended for heavy or difficult-to-machine materials, particularly the ISO groups M and S, making it suitable for tasks where heat resistance and edge robustness are crucial. As a coated indexable insert, it supports a range of turning operations from roughing to semi-finishing, allowing shops to standardise tooling across several components and alloys. The result is higher overall productivity, simplified tooling management and a reduction in tool-change frequency for serial manufacturing. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on the Walter Tools GX16-2E300N15-RF8 WSM23S insert; technical consultants are available by email or phone. Technical data Article number: GX16-2E300N15-RF8-WSM23S-WALTER Designation: GX16-2E300N15-RF8 WSM23S Product type: Indexable turning insert Facts Grade: WSM23S Material groups: S / M Series: Tiger·tec Silver Special features Coating: Tiger·tec Silver (coated carbide) Geometry: 2E300N15‑RF8 Suitable for: rostfreier Stahl, heat‑resistant superalloys and titanium FAQ What materials is this insert suitable for? The insert is suitable for machining rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S); the WSM23S grade and Tiger·tec Silver coating are selected for thermal stability and edge robustness. Which operations are recommended for this geometry? The 2E300N15‑RF8 geometry is optimised for turning operations that require controlled chip formation and edge security, such as productive roughing and semi‑finishing of difficult materials. How does the Tiger·tec Silver coating benefit cutter life? The Tiger·tec Silver coating reduces thermal and adhesive wear on the coated carbide substrate, helping to maintain a stable cutting edge and extend in‑service life under elevated temperatures. Is this insert suitable for finishing stainless components? While primarily designed for heavy and demanding cuts in rostfreier Stahl and superalloys, the insert can be applied in semi‑finishing contexts where its edge stability supports consistent surface quality Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification purposes only and do not indicate any affiliation. The offered article is an original factory‑new product of Walter Tools.
GX16-2E300R15-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM33S grade for dependable wear resistance and heat tolerance in demanding turning tasks; the result is predictable tool life and consistent surface quality. Order genuine Walter Tools inserts directly via Metav Werkzeuge or contact our specialists for application advice. GX16-2E300R15-CF5 WSM33S indexable turning insert – Tiger‑tec Silver, for stainless steels and superalloys (Walter Tools) The GX16-2E300R15-CF5 WSM33S is an indexable turning insert engineered for heavy‑duty machining and for secure performance when working with stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coated carbide grade WSM33S Designed for stainless steel and superalloys Stable cutting edge for secure chip control Suitable for heavy‑duty turning operations High wear resistance and thermal stability for demanding materials The combination of the Tiger‑tec Silver series and the WSM33S grade delivers a coated carbide solution with improved wear resistance and thermal stability. Coated carbide means a hard substrate with a protective multi‑layer coating that reduces flank and crater wear under elevated temperatures. For shops facing intermittent heat spikes or abrasive workpiece conditions, this translates into fewer unexpected tool changes and more predictable replacement intervals, supporting uninterrupted production and lower overall tooling costs. Predictable chip control and edge security for reliable surface quality The defined chipbreaker geometry 2E300R15‑CF5 promotes controlled chip formation and evacuation, reducing the risk of built‑up edge when machining tough alloys. A stable cutting edge reduces vibration and improves surface finish; in practice, this means fewer secondary operations and more consistent part tolerances. The insert’s design supports stable machining parameters, which simplifies process setting and contributes to higher first‑pass yield in repetitive turning applications. Productivity gains through process security and broad material coverage Rated for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), this insert is tailored for workplaces that must handle difficult‑to‑machine materials without frequent tool intervention. Using a grade focused on edge robustness and controlled wear leads to longer runtimes and less operator intervention, improving machine utilisation. For production environments aiming to shorten cycle times while maintaining component quality, the indexable insert concept combined with this grade offers an efficient route to steady, reproducible results. For tailored recommendations on using Walter Tools Tiger‑tec Silver inserts in specific stainless steel or superalloy turning tasks, contact Metav Werkzeuge for expert application support at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data SKU: GX16-2E300R15-CF5-WSM33S-WALTER Article designation: GX16-2E300R15-CF5 WSM33S Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Series: Tiger‑tec Silver Grade: WSM33S Chipbreaker / geometry: 2E300R15-CF5 Applicable material groups: S / M Stainless steel applicability: yes Features and applications Coated carbide grade for improved wear resistance Intended for heavy‑duty turning of stainless steels and superalloys Stable cutting edge for optimised chip formation Designed for consistent surface quality and process security FAQ What materials is this insert suitable for? The GX16-2E300R15-CF5 WSM33S is suitable for stainless steels (ISO group M) and for heat‑resistant superalloys or titanium (ISO group S), offering stability where conventional grades wear rapidly. What does the WSM33S grade offer compared with standard carbide? The WSM33S grade in the Tiger‑tec Silver family is a coated carbide formulation that emphasises heat tolerance and controlled wear, resulting in extended runtimes and a reduced rate of edge failure for demanding turning operations. How does the 2E300R15‑CF5 chipbreaker improve machining? The 2E300R15‑CF5 chipbreaker promotes consistent chip formation and evacuation, which supports a stable cutting edge, lowers the chance of built‑up edge and enhances repeatable surface finish on difficult materials. Is this insert intended for finishing or roughing operations? The insert is engineered for heavy‑duty turning and suits applications where edge stability and wear resistance are critical; depending on machine setup and insert geometry, it can be deployed for robust finishing and roughing tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original and brand‑new from the manufacturer (Walter Tools).
GX16-2E318N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WSM23S grade optimised for stainless steels and superalloys, and a dedicated chipbreaker for stable chip formation and consistent tool life; order these indexable turning inserts directly via Metav Werkzeuge or contact our consultants for application advice. GX16-2E318N02-UF8 WSM23S indexable turning insert — Walter Tools, Tiger·tec Silver coating, chipbreaker 2E318N02-UF8 The GX16-2E318N02-UF8 WSM23S is an indexable turning insert designed for machining stainless steels and heat‑resistant superalloys, offering a coated carbide grade for demanding turning operations Tiger·tec Silver coated carbide Designed for stainless steels and superalloys Robust edge stability for heavy cuts Optimised chip control geometry Consistent performance on tough alloys for predictable production The combination of the Tiger·tec Silver coating with the WSM23S grade delivers a coated carbide solution engineered for materials that challenge tool life. For stainless steels and heat‑resistant alloys, the insert supports secure chip formation and reduces the tendency for built‑up edge; this results in a stable cutting edge over longer running times. The technology behind the coating enhances heat resistance and wear protection, which in practical terms means fewer tool changes and more reliable cycle times on serial production runs. Measurable productivity gains through higher process reliability By favouring edge stability and optimised friction characteristics, this insert enables higher effective cutting parameters while maintaining surface quality. The optimised chip control reduces rework and machine stoppages caused by poor chip evacuation, leading to better throughput. For shop floors where consistent component tolerances and repeatability matter, the insert’s design contributes directly to improved process economy and reduced per‑part tooling costs, a clear rational advantage for production planning. Straightforward use and mounting for rapid tool changes The chipbreaker code and ISO designation reflect a geometry adapted to common toolholders for turning operations. The chipbreaker 2E318N02‑UF8 is shaped to break and evacuate chips effectively in long and short turning passes; explained simply, a chipbreaker is a surface form on the insert that guides and fractures the chips to prevent tangling and tool damage. This practical feature eases setup, shortens intervention time and supports continuous operation in mixed‑material batches without complex reprogramming. Reliable choice for demanding components and repeatable results Selecting this grade means opting for a product that balances durability with surface integrity. The insert is suited to components exposed to thermal loads or those requiring tight surface finish; consistent edge behaviour ensures fewer rejects and steadier machine utilisation. The manufacturer’s reputation for precision tools further underpins the choice, offering confidence in repeatable performance when working with challenging alloys. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools Tiger·tec Silver inserts or to discuss suitability for specific materials — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: GX16-2E318N02-UF8-WSM23S-WALTER Type: indexable turning insert ISO designation: GX16-2E318N02-UF8 WSM23S Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: 2E318N02‑UF8 Material group compatibility: S / M Facts Applicable material group M: stainless steels Applicable material group S: heat‑resistant superalloys and titanium alloys Coating technology: Tiger·tec Silver Design: coated carbide insert Special features Coated carbide grade for heat resistance and wear protection Optimised chip control geometry for stable chip formation Robust edge stability for heavy cuts and interrupted machining Suited to demanding turning operations on stainless and superalloys FAQ Which materials is this insert suitable for? The insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S); the WSM23S grade and Tiger·tec Silver coating support these material families. What does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the GX16-2E318N02-UF8 WSM23S improves heat resistance and wear protection, helping to maintain edge integrity and extend running life under elevated temperatures. How does the chipbreaker 2E318N02‑UF8 affect machining? The 2E318N02‑UF8 chipbreaker is designed for controlled chip formation and evacuation, reducing the risk of chip build‑up and aiding consistent surface finish during turning. Can this insert be used for interrupted cuts or heavy feed operations? The insert’s robust edge stability and coated carbide construction make it suitable for demanding turning tasks, including heavier engagement and intermittent cutting, while providing predictable wear behaviour. What is the exact article designation for ordering and identification? Article designation: GX16-2E318N02‑UF8 WSM23S — SKU GX16-2E318N02-UF8-WSM23S-WALTER, Walter Tools indexable turning insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. There is no affiliation between Metav Werkzeuge and the named manufacturers; the item described is an original, factory‑new product of the stated brand.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com