GX24-2E280L02-VG7 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM23S grade for reliable machining of stainless steel and heat‑resistant superalloys; the result is a stable cutting edge, improved process security and longer tool life. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. GX24-2E280L02-VG7 WSM23S turning indexable insert — Tiger‑tec Silver grade for stainless steel and superalloys | Walter Tools A GX24-2E280L02-VG7 WSM23S turning indexable insert designed for demanding turning operations in stainless steel and heat‑resistant superalloys, offering a coated carbide grade and a chipbreaker geometry optimised for secure chip formation Tiger‑tec Silver coating for durability WSM23S grade for stainless steel and S‑materials Stable cutting edge and process security Geometry 2E280L02‑VG7 for controlled chip flow Improved process security when machining stainless steel and superalloys The combination of the WSM23S grade and Tiger‑tec Silver coating delivers enhanced thermal resistance and abrasion protection, which supports a stable cutting edge during challenging cuts. For materials that generate heat and tend to work‑harden—such as stainless steel and heat‑resistant superalloys—this insert’s engineered grade reduces the risk of build‑up on the cutting edge and enables more consistent cycle times. The coating also helps to maintain flank and crater wear characteristics, extending the interval between index changes and lowering tool handling time. Coating and grade translate into tangible productivity gains A coated carbide grade tuned to high temperatures offers measurable benefits in daily production. By resisting thermal degradation and preserving edge integrity, the insert reduces scrap rates and supports higher cutting parameters where appropriate. The WSM23S grade is particularly suitable for parts that require dimensional consistency and good surface quality; the coating minimises adhesion and eases chip evacuation, which contributes to predictable machining outcomes and a more economical process overall. Geometry and chip control for repeatable surface finish The chipbreaker coded 2E280L02‑VG7 is designed for controlled chip formation in turning operations, balancing chip segmentation with low cutting forces. Controlled chips improve surface finish and reduce the chance of secondary damage to the workpiece. For workshops seeking reliable, repeatable results on stainless steel components or on components made from temperature‑resistant alloys, the insert’s geometry supports stable cutting conditions and simplifies machine setup, resulting in shorter set‑up times and fewer interruptions. Specify Walter Tools Tiger‑tec Silver grade WSM23S when enquiring — Metav Werkzeuge can advise on the ideal geometry and delivery options for specific stainless steel applications Technical data Article number: GX24-2E280L02-VG7-WSM23S-WALTER Designation: GX24-2E280L02-VG7 WSM23S Product type: Turning indexable insert Series: Tiger‑tec Silver Facts No numerical cutting data provided Special features Coating technology: Tiger‑tec Silver Grade: WSM23S (coated carbide) Suitable for: stainless steel; heat‑resistant superalloys and titanium Chipbreaker geometry: 2E280L02‑VG7 FAQ What materials is this insert suited for? The GX24-2E280L02-VG7 WSM23S insert is intended for machining stainless steel and for many heat‑resistant superalloys; the WSM23S grade supports secure chip formation and edge stability in those groups. How does the Tiger‑tec Silver coating benefit machining? Tiger‑tec Silver on the WSM23S grade enhances thermal and abrasive resistance, which helps to preserve the cutting edge and extend useful life during demanding turning operations. Which geometry should be chosen for better chip control? The 2E280L02‑VG7 chipbreaker geometry is tailored for controlled chip segmentation and low cutting forces, improving surface finish and reducing interruption risk in continuous turning. Is this insert suitable for titanium alloys? Yes; depending on the component and cutting conditions, the WSM23S grade is applicable to titanium and similar difficult‑to‑machine alloys thanks to its heat‑resistant properties. How is tool life affected compared with uncoated grades? Compared with standard uncoated carbide, the coated WSM23S grade with Tiger‑tec Silver typically offers improved wear resistance and longer intervals between index changes under comparable conditions. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
GX24-2E280R02-VG7 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of thermal stability, targeted chip control, and long tool life for efficient machining of difficult-to-cut alloys; order the insert directly via Metav Werkzeuge or ask our consultants if needed. GX24-2E280R02-VG7 WSM23S indexable turning insert – Tiger‑tec Silver for stainless steels and superalloys (Walter Tools) A GX24-2E280R02-VG7 WSM23S indexable turning insert engineered for reliable performance when machining rostfreier Stahl and high-temperature superalloys in demanding production environments Tiger‑tec Silver coating for heat resistance Optimised chipformer 2E280R02-VG7 WSM23S grade for stainless and superalloys Walter Tools quality and reliable edge life Outstanding thermal stability for high-temperature alloys The combination of the Tiger‑tec Silver coating and the WSM23S grade provides enhanced heat resistance and wear control, making the insert particularly suited to machining rostfreier Stahl and heat-resistant superalloys. This material pairing promotes stable cutting edges and helps to avoid premature flank wear under thermally demanding conditions. For production shops, that translates into more predictable cycle times and reduced scrap rates, as the coating supports higher sustained cutting loads without rapid degradation of the cutting edge. Longer tool life and consistent surface quality Optimised substrate and coating characteristics deliver reliable edge life and repeatable part finish — benefits that increase process uptime and lower overall tooling cost per component. The insert’s design focuses on controlled wear progression so that tool changes become planned events rather than unexpected interruptions. Improved consistency in the machined surface helps to reduce secondary operations and inspection effort, delivering quantifiable gains in throughput and first-pass yield. Precision chip control reduces machining risk The integrated chipformer 2E280R02-VG7 is engineered to maintain short, controllable chips when cutting tough materials, significantly lowering the risk of built-up edge and thermal damage at the cutting zone. Effective chip control contributes to safer chip evacuation and reduces tool–workpiece interaction problems that otherwise degrade dimension and surface integrity. For operators less familiar with advanced inserts, this means fewer process adjustments and a smoother ramp-up to stable cutting parameters. Clear application focus and practical selection advice Designed primarily for S/M material groups, the insert is especially effective on rostfreier Stahl and high‑temperature nickel- and cobalt-based alloys, where heat generation and material toughness demand a specialised grade. Selection should consider workpiece material, component tolerance and machine rigidity; matching the insert geometry to the task ensures the intended balance of life and finish. For detailed compatibility with specific toolholders or cutting parameter recommendations, local technical advice is available to ensure the most productive setup. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger‑tec Silver inserts and to confirm the best grade and chipformer for the job; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: GX24-2E280R02-VG7-WSM23S-WALTER Description: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Grade: WSM23S Series: Tiger‑tec Silver Chipformer: 2E280R02-VG7 Material group: S / M Suitable for: rostfreier Stahl, superalloys Facts No dimensional data provided No maximum cutting parameters supplied No weight or insert geometry dimensions available Special features Coated cemented carbide (Tiger‑tec Silver technology) Optimised chipforming geometry Intended for rostfreier Stahl and heat‑resistant alloys Designed for stable cutting edge and improved wear resistance Original Walter Tools product FAQ What materials is this insert suitable for? The GX24-2E280R02-VG7 WSM23S insert is intended for rostfreier Stahl and heat-resistant superalloys (material groups S and M). How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on this Walter Tools insert increases thermal resistance and improves wear control, supporting longer tool life in high-temperature cutting. What role does the 2E280R02-VG7 chipformer play? The chipformer 2E280R02-VG7 promotes predictable chip control and reduces the risk of built-up edge, improving process reliability when using the insert. Is this insert suitable for finish machining to high surface-quality standards? Yes; the combination of grade and coating is designed to provide reliable edge life and consistent surface finish in suitable applications with the GX24-2E280R02-VG7 WSM23S insert. Where can one obtain advice on cutting parameters for this insert? Application-specific cutting data and selection guidance for the Walter Tools insert can be obtained from Metav Werkzeuge or the manufacturer's technical documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
GX24-2E280R02-VG7 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM33S grade for reliable machining of stainless steels and heat‑resistant alloys; this insert delivers stable cutting edges and consistent chip control. Order directly via Metav Werkzeuge or consult the team for cutting data and application advice. GX24-2E280R02-VG7 WSM33S indexable turning insert by Walter Tools — Tiger·tec Silver coating for stainless and superalloys GX24-2E280R02-VG7 WSM33S is an indexable turning insert designed for demanding turning operations on stainless steels and heat‑resistant superalloys, offering a balance of wear resistance and edge stability Tiger·tec Silver coating for extended tool life Grade WSM33S for stainless and superalloys Stable cutting edge for heavy interrupted cuts Precision chipbreaker 2E280R02-VG7 for chip control Boosted productivity through advanced coated carbide technology The Tiger·tec Silver coating combined with the WSM33S grade provides a marked improvement in wear resistance and thermal stability compared with uncoated grades. Coated carbide inserts reduce flank and crater wear during continuous and interrupted turning, which translates into longer tool life and fewer indexings. The result is a more predictable process window and higher machining throughput; shops processing corrosion‑resistant alloys or high‑temperature materials gain from reduced downtime and consistent part quality. In practical terms, the coating enhances adhesion resistance and surface integrity, supporting reliable production runs. Consistent performance when machining stainless steels and superalloys Designed for material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), this insert supports secure chip formation and edge stability under high cutting temperatures. The listed chipbreaker 2E280R02‑VG7 is optimised to control chip shape and evacuation in tricky materials that tend to form long, stringy swarf. By encouraging controlled chip folding and breakage, the insert reduces rework and the risk of surface damage. For operators facing costly scrap from poor chip control, the combination of geometry and grade delivers measurable process reliability. Practical advantages, setup clarity and recommended use The turning insert’s geometry and coating simplify parameter selection: emphasise moderate feeds and cutting speeds suited to the grade and machine rigidity to exploit the stable cutting edge. As a coated carbide insert, it tolerates the thermal loads typical of machining rust‑resistant steels and superalloys, enabling longer intervals between tool changes. Selection guidance: choose the insert when the priority is sustained edge life and secure chip control in demanding materials. For customers requiring specific cutting data or trial recommendations, technical support is available to match insert geometry to the machining task. For tailored cutting data, availability and application support for the Tiger·tec Silver WSM33S insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange specification matching and supply. Technical data SKU: GX24-2E280R02-VG7-WSM33S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Designation: GX24-2E280R02-VG7 WSM33S Manufacturer: Walter Tools Facts Applicable groups: S / M Chipbreaker code: 2E280R02-VG7 Special features Coating technology: Tiger·tec Silver Grade: WSM33S (coated carbide) Suitable for: stainless steels (M), superalloys and titanium (S) Series: Tiger-tec Silver FAQ What materials is this insert suitable for? The GX24-2E280R02-VG7 WSM33S insert from Walter Tools is specified for stainless steels (group M) and heat‑resistant superalloys/titanium (group S), offering thermal and edge stability for these materials. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM33S grade increases wear resistance and reduces edge breakdown during elevated cutting temperatures, improving tool life and process consistency. What is the purpose of the 2E280R02‑VG7 chipbreaker? The 2E280R02‑VG7 chipbreaker is designed to promote controlled chip formation and evacuation in materials that tend to produce long chips, thereby reducing rework and enhancing surface finish when using the insert. Is this insert suitable for interrupted cuts and heavy machining? Yes, the insert’s combination of coated carbide grade and robust geometry provides a stable cutting edge that performs well in heavy and interrupted turning operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. The mentioned brand is used for explanation and comparison only. The offered item is original, factory‑new goods of the respective manufacturer.
GX24-2E280R04-VG7 WSM23S WSM23S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM23S grade delivers reliable edge stability and consistent chip control when machining stainless steel and heat‑resistant alloys; order the insert through Metav Werkzeuge for efficient lead times and application advice. GX24-2E280R04-VG7 WSM23S Drehwendeschneidplatte – Tiger·tec Silver grade for stainless steel | Walter Tools The GX24-2E280R04-VG7 WSM23S is a reversible turning insert optimised for secure chip formation and stable cutting edges in demanding materials such as stainless steel and superalloys. Tiger·tec Silver coating for wear resistance Optimised for stainless steel and heat‑resistant alloys Robust edge stability for long tool life High productivity through predictable performance The Tiger·tec Silver series combines a coated carbide matrix with the WSM23S grade to provide consistent cutting performance under thermal and mechanical load. The insert’s design supports reliable chip formation, reducing the risk of built‑up edge and unexpected downtime. For production environments where cycle time and reproducibility matter, this translates into fewer tool changes and a more stable machining process, improving throughput without sacrificing surface quality. Durable edge and heat resistance explained The WSM23S is a coated carbide grade engineered for materials that are abrasive or generate high heat, such as stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S). Coatings in the Tiger·tec Silver family enhance hardness at the cutting edge while reducing chemical affinity with the workpiece; in practice, this means improved wear resistance and a lower tendency for adhesion of material to the insert. The 2E280R04‑VG7 chipbreaker geometry further supports controlled chip evacuation, which is crucial when machining temperature‑sensitive alloys. Improved process security and handling benefits A turning insert from this series offers stable cutting behaviour across varying cutting conditions, helping to secure consistent part tolerances and surface finish. The reversible design reduces tooling inventory and simplifies re‑indexing during service, while the graded carbide ensures repeatable edge life. For shops focusing on efficient setup and predictable results, the insert’s combination of coating and grade contributes to lower unit machining costs and more reliable production planning. For tailored application recommendations or to obtain this Walter Tools Tiger·tec Silver insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, practice‑oriented support Technical Data Article number: GX24-2E280R04-VG7-WSM23S-WALTER Item designation: GX24-2E280R04-VG7 WSM23S Product type: Drehwendeschneidplatte Core data Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: 2E280R04‑VG7 Special features Coated carbide for enhanced edge protection Material group suitability: S / M (heat‑resistant alloys; stainless steel) Designed for stable chip formation and long tool life FAQ What materials is this insert suitable for? The GX24‑2E280R04‑VG7 WSM23S insert is suitable for stainless steel (ISO M) and heat‑resistant superalloys and titanium (ISO S), offering optimised chip control and edge security for these groups. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver coating on the WSM23S grade increases surface hardness and reduces adhesion, which improves wear resistance and helps maintain a stable cutting edge over longer tool life. What role does the 2E280R04‑VG7 chipbreaker play? The 2E280R04‑VG7 chipbreaker geometry promotes controlled chip formation and evacuation, reducing the likelihood of built‑up edge and improving surface quality during turning operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.*
GX24-2E280R04-VG7 WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM33S grade and a robust chipbreaker geometry for reliable machining of tough alloys and stainless steel; order directly via Metav Werkzeuge or consult the team for application support. GX24-2E280R04-VG7 WSM33S indexable turning insert – Tiger‑tec Silver, for tough alloys — Walter Tools GX24-2E280R04-VG7 WSM33S is an indexable turning insert designed for high thermal and mechanical stress applications, especially in stainless steel and heat‑resistant superalloys. Tiger‑tec Silver coating for heat resistance WSM33S grade for stable cutting edges Optimised chipbreaker geometry 2E280R04‑VG7 Suitable for stainless steel and superalloys Reliable cutting performance for demanding materials The coated carbide WSM33S combines the Tiger‑tec Silver technology with a geometry tailored to heavy‑duty turning. This results in a stable cutting edge and improved wear resistance under high temperatures, which reduces flank wear and extends tool life. For production environments faced with workhardening or built‑up edge formation, this grade supports a controlled cutting process and consistent component tolerances. The design ensures predictable tool behaviour, aiding process planning and minimising unexpected downtime. Improved chip control and surface quality The integrated 2E280R04‑VG7 chipbreaker promotes reliable chip formation and evacuation even when machining sticky or gummy alloys. By producing short, controllable chips, the insert lowers the risk of surface damage and enhances surface finish consistency. Reduced chip entanglement also contributes to safer automated turning cycles and fewer interruptions for chip clearing, improving overall machining throughput. The combination of geometry and coating delivers a measurable advantage in cycle stability. Process security and material compatibility Specified for work on stainless steel and heat‑resistant superalloys, this insert supports operations where thermal loads and material toughness compromise conventional grades. The coated carbide substrate and the Tiger‑tec Silver technology are optimised to withstand elevated cutting temperatures while maintaining edge integrity. This yields higher process security and repeatable performance in serial production, where consistent part quality and tool life are essential metrics. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Silver inserts for enhanced process reliability and tailored application advice; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: GX24-2E280R04-VG7-WSM33S-WALTER Designation: GX24-2E280R04-VG7 WSM33S Product type: indexable turning insert Grade / Sort: WSM33S Series: Tiger‑tec Silver Chipbreaker: 2E280R04‑VG7 Manufacturer: Walter Tools Facts Material class: S / M Suitable for stainless steel: yes Special features Coating: Tiger‑tec Silver Substrate: coated carbide Typical application: tough‑to‑machine alloys and stainless steel Benefit focus: edge stability, wear resistance, chip control FAQ What materials is this insert suitable for? The GX24‑2E280R04‑VG7 WSM33S insert is designed for stainless steel and heat‑resistant superalloys, providing stable cutting performance under elevated thermal loads. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver reduces thermal degradation and enhances wear resistance on the WSM33S grade, extending tool life and maintaining edge stability during aggressive turning operations. Can this insert improve process reliability in serial production? Yes — the combination of the WSM33S grade and the 2E280R04‑VG7 chipbreaker helps ensure repeatable chip control and surface quality, supporting consistent serial production results. Is this insert suitable for automated turning cells? The controlled chip formation and robust edge integrity of this insert make it well suited for automated environments where predictable chip behaviour is critical. What is the main advantage of the WSM33S sort? WSM33S is a coated carbide grade optimised for a broad range of difficult‑to‑machine materials, prioritising edge life and thermal resilience for productive machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-2E300L6-CE4 WKP23S Wendeplatten - Walter Tools
The combination of the WKP23S grade and the Tiger·tec Silver technology results in reliable wear resistance and stable chip formation, improving productivity and reducing tool changes; order the GX24-2E300L6-CE4 WKP23S directly via Metav Werkzeuge or consult the team for application advice. GX24-2E300L6-CE4 WKP23S indexable turning insert — Tiger·tec Silver, for steel and cast iron (Walter Tools) GX24-2E300L6-CE4 WKP23S is an indexable turning insert designed for medium to high-volume machining where consistent tool life and controlled chips are required for steel and cast iron applications. Tiger·tec Silver coating for extended tool life Optimised chip formation for stable cutting Suited to steel and cast iron machining Coated carbide grade WKP23S for durability Increased productivity thanks to advanced coating and heat control The Tiger·tec Silver surface treatment combines thermal stability with resistance to abrasive wear, which means fewer interruptions for tool changes and more consistent cycle times. This advanced coating reduces flank and crater wear in the typical temperature ranges encountered when turning unalloyed and alloyed steels, so production runs benefit from predictable tool life. Fewer tool changes directly support higher machine utilisation and lower overall machining costs while maintaining dimensional stability on the machined parts. Better chip control and improved surface quality The insert geometry with the 2E300L6-CE4 chipbreaker is configured to promote short, controllable chips and minimise chatter under common turning conditions. Improved chip formation reduces the need for manual chip handling and lowers the risk of rework caused by surface defects. As a result, the insert helps to secure a consistently good surface finish, particularly on interrupted cuts or mixed-feature components, which decreases downstream finishing effort and strengthens process reliability. Broad application: a reliable choice for steel and cast iron Designed as a coated carbide grade, WKP23S provides a balance between toughness and wear resistance, making it suitable for machining steel and cast iron in accordance with ISO P and K groupings. The grade handles the heat and chip characteristics typical of steel turning while also managing the abrasive nature and brittle chip behaviour of many cast irons. This versatility reduces the need for multiple grades across mixed-production environments and simplifies tool selection for planners and operators. Engineered for stable processes and predictable tool life The insert is built to support process security through a consistent edge line and robust substrate, delivering repeatable performance across sequential parts. Stable cutting edge behaviour contributes to fewer out-of-tolerance components and less process variation, which is especially valuable in serial production. The combination of geometry and material results in a consistent edge that allows machining strategies to focus on throughput and quality rather than compensating for unpredictable tool wear. Contact Metav Werkzeuge for tailored cutting data, application recommendations and to request the GX24-2E300L6-CE4 WKP23S cutting-sheet from Metav Werkzeuge. Technical data SKU: GX24-2E300L6-CE4-WKP23S-WALTER Designation: GX24-2E300L6-CE4 WKP23S Product type: indexable turning insert Grade: WKP23S Series: Tiger·tec Silver Facts Applicable material groups: P, K Chipbreaker: 2E300L6-CE4 Material composition: coated carbide UID: GX24-2E300L6-CE4-WKP23S-WALTER Special features Coated carbide grade for balanced toughness and wear resistance Optimised chip control geometry Suitable for steel and cast iron machining Designed for predictable tool life in serial production FAQ What materials is this insert suitable for? The GX24-2E300L6-CE4 WKP23S is formulated for machining steel and cast iron, corresponding to ISO groups P and K, offering tailored wear resistance and toughness for those materials. How does the Tiger·tec Silver technology benefit production? Tiger·tec Silver coating on the WKP23S grade improves thermal stability and abrasion resistance, which extends tool life and supports consistent cycle times in production environments. What is the purpose of the 2E300L6-CE4 chipbreaker? The 2E300L6-CE4 chipbreaker promotes short, controllable chips and reduces vibration, enhancing surface quality and reducing the risk of interrupted-cut issues during turning operations. Is this insert intended for serial production or prototypes? With its balanced WKP23S grade and Tiger·tec Silver coating, the insert is particularly well suited to serial and batch production where predictable tool life and process stability are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not indicate any affiliation between Metav Werkzeuge and the respective brand owners. The offered item is an original, factory-new product of the manufacturer.
GX24-2E300N00-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Silver coating and the WSM33S cutting grade for consistent edge stability and secure chip control, ensuring productive machining of demanding alloys; order the inserts directly via Metav Werkzeuge or consult our specialists for application guidance. GX24-2E300N00-CF5 WSM33S turning indexable insert, Tiger·tec Silver coating – Walter Tools The GX24-2E300N00-CF5 WSM33S is an indexable turning insert engineered for reliable machining of stainless steels and heat‑resistant superalloys in demanding turning operations Tiger·tec Silver coating for thermal resistance WSM33S grade for secure chip control Optimised chipformer 2E300N00-CF5 Designed for stainless steels and superalloys Longer tool life through advanced coating technology The Tiger·tec Silver coating is developed to withstand higher temperatures and reduce flank wear, which translates into longer tool life and fewer interruptions in production. For workshops processing tough materials, the coating’s thermal stability supports steady cutting performance and improved process security. This benefit is particularly clear in serial turning where predictable tool behaviour lowers rework rates and increases overall throughput. Stable cutting edge and dependable chip evacuation The WSM33S cutting grade, combined with the chipformer 2E300N00-CF5, promotes secure chip control and a stable cutting edge during interrupted or continuous cuts. Improved chip formation reduces the risk of built‑up edge and helps achieve a consistent surface finish, especially when machining materials prone to adhesion. The insert geometry is tailored to enable controlled chip flow, simplifying swarf handling and contributing to safer, cleaner turning cycles. Purpose-built for demanding materials and consistent results Designed for ISO groups M and S, this insert is suited to stainless steels and heat‑resistant superalloys, including titanium alloys in many applications. These materials present challenges such as poor thermal conductivity and high work‑hardening tendencies; the chosen grade and series address these by prioritising heat resistance and edge robustness. The result is reproducible performance and fewer rejects, making the solution attractive for manufacturers seeking stable, high‑quality turning operations. Seamless integration into productive turning setups As an indexable insert from the Tiger·tec Silver series by Walter Tools, the GX24-2E300N00-CF5 WSM33S is compatible with standard turning toolholders and designed to reduce changeover time. The combination of coating, grade and chipformer supports higher process reliability and predictable tool life, which in turn helps optimise cycle times and lower unit costs. For technical queries or matching holders and cutting parameters, Metav Werkzeuge can provide application support and recommendations. Contact Metav Werkzeuge today for cutting data, application advice and to source genuine Walter Tools Tiger·tec Silver turning inserts for robust machining of stainless steels and superalloys Technical data SKU: GX24-2E300N00-CF5-WSM33S-WALTER Article designation: GX24-2E300N00-CF5 WSM33S Product type: Turning indexable insert Manufacturer: Walter Tools Core data Material group: S / M Applicable ISO groups: M, S Series: Tiger·tec Silver Grade: WSM33S Special features Coating: Tiger·tec Silver Chipformer: 2E300N00-CF5 Suitable for: stainless steels, heat‑resistant superalloys, titanium (depending on geometry) Coated cemented carbide cutting grade FAQ What materials is this insert suitable for? The GX24-2E300N00-CF5 WSM33S turning insert from Walter Tools is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), with applicability to certain titanium alloys depending on geometry. What advantages does the WSM33S grade offer? WSM33S is a coated cemented carbide grade that supports secure chip control and a stable cutting edge under thermal load, helping to reduce built‑up edge and extend tool life in demanding turning operations. Why is the chipformer important for machining performance? The chipformer 2E300N00-CF5 optimises chip breaking and evacuation, which reduces swarf issues and contributes to a consistent surface finish and safer machining cycles. Is the Tiger·tec Silver coating beneficial for high‑temperature cutting? Yes; the Tiger·tec Silver coating improves thermal resistance and wear behaviour, making the insert well suited to turning applications where heat generation and adhesion are critical concerns. How does this insert support process reliability in production? By combining a heat‑resistant coating, a robust cutting grade and an optimised chipformer, the insert delivers reproducible cutting performance and predictable tool life, which enhances overall process security and reduces downtime. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
GX24-2E300N02-CE4 WKP23S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP23S grade combined with the GX24‑2E300N02‑CE4 chipbreaker to ensure stable chip control and extended tool life for turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. GX24-2E300N02-CE4 WKP23S indexable turning insert (Tiger‑tec Silver) — Coated carbide, ISO P/K by Walter Tools GX24-2E300N02-CE4 WKP23S is a coated indexable turning insert for demanding machining of steel and cast iron, designed to deliver reproducible results in production environments Tiger‑tec Silver coated carbide grade WKP23S Optimised for ISO P (steel) and ISO K (cast iron) Chipbreaker 2E300N02‑CE4 for reliable chip control Designed for stable wear behaviour and high productivity Extended tool life through advanced coating The combination of the Tiger‑tec Silver coating and the WKP23S grade provides a significant improvement in wear resistance compared with uncoated grades. The coating reduces abrasive and thermal wear, which leads to a longer edge life and fewer insert changes during a production shift. This benefit translates into higher machine uptime and lower tool costs per component when machining steels and cast irons under typical turning conditions. Consistent chip control for smoother processes The 2E300N02‑CE4 chipbreaker geometry is developed to promote predictable chip formation and evacuation. Predictable chips reduce the risk of surface damage and tool interference, allowing a steady cycle time and fewer interruptions. For workshop environments where consistent batch quality matters, this chip control supports efficient parts handling and simplifies downstream cleaning or inspection. Broad suitability across steel and cast‑iron applications Engineered for the ISO material groups P and K, the insert performs reliably on a range of unalloyed and alloyed steels as well as common cast irons. The grade and geometry are matched to the thermal and abrasive conditions encountered in these material families, balancing toughness and hardness to resist chipping while maintaining a sharp cutting edge. This makes the insert a practical choice for mixed-production shops seeking a single solution for multiple workpiece types. Production benefits and application guidance Using a coated carbide insert with a robust chipbreaker reduces secondary operations and supports steady surface quality. The design emphasises repeatability: fewer variations in tool life and more stable process windows. For optimisation, match insert grade and chipbreaker to workpiece material and machining strategy; when in doubt, technical advisors can recommend the most efficient parameters for specific jobs to ensure secure, productive turning cycles. Contact Metav Werkzeuge for tailored application advice and rapid supply of Walter Tools Tiger‑tec Silver inserts; eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: GX24-2E300N02-CE4-WKP23S-WALTER Designation: GX24-2E300N02-CE4 WKP23S Product type: Indexable turning insert Manufacturer: Walter Tools Facts ISO groups: P (steel), K (cast iron) Grade: WKP23S Series: Tiger‑tec Silver Special features Chipbreaker: 2E300N02‑CE4 Material: Coated carbide Compatible materials: Steel, Cast iron FAQ What materials is this insert suitable for? The GX24-2E300N02-CE4 WKP23S insert is specified for ISO groups P and K, making it suitable for various steels and cast irons. What does the WKP23S grade offer in practice? The WKP23S grade combines a coated carbide substrate with Tiger‑tec Silver technology to provide enhanced wear resistance and stable edge behaviour in turning operations. How does the 2E300N02‑CE4 chipbreaker affect machining? The 2E300N02‑CE4 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of chip entanglement and improving process reliability. Is this insert intended for high‑production environments? Yes; the combination of a robust chipbreaker and a high‑performance coating supports reproducible machining and extended tool life, which is advantageous for serial production. Can the GX24-2E300N02-CE4 WKP23S be used for finishing operations? Depending on geometry and cutting parameters, the insert can achieve consistent surface quality; selection of feeds and depths of cut should align with the machining objective. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-2E300N02-CE4 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of a high-performance combination: a Tiger·tec Silver coated carbide grade and a geometry tuned for reliable chip control deliver consistent results when machining demanding materials. The insert’s suitability for rostfreier Stahl and heat-resistant superalloys like Titan reduces setup iterations and supports uninterrupted production. Order directly via Metav Werkzeuge or consult their specialists for material-specific recommendations. GX24-2E300N02-CE4 WSM23S turning insert — Tiger·tec Silver grade for rostfreier Stahl and Titan by Walter Tools GX24-2E300N02-CE4 WSM23S is a coated indexable turning insert for heavy-duty applications in rostfreier Stahl and heat-resistant superalloys, designed to combine cutting-edge wear resistance with robust chip control Tiger·tec Silver coated carbide grade WSM23S Optimised for rostfreier Stahl and superalloys Reliable chip control with 2E300N02-CE4 geometry Robust cutting edge for stable long-run machining High-performance cutting where reliability matters The combination of the Tiger·tec Silver coating and the WSM23S grade offers superior resistance to thermal and mechanical wear, which is critical for machining rostfreier Stahl and heat-resistant alloys. Coated carbide minimises abrasive and adhesive wear during demanding cuts, while the tailored composition of the grade supports stable chip formation under elevated cutting temperatures. For production-focused operations this translates into fewer tool changes and more predictable cycle times, improving overall machining throughput. Durable edge and consistent process security A carefully engineered cutting-edge geometry provides the basis for process security and repeatable surface quality. The insert’s geometry, identified by 2E300N02-CE4, ensures controlled chip breaking and reduced tendency for built-up edge when facing sticky or work-hardened materials. This leads to a stable cutting edge over longer tool life, allowing for more aggressive feed and depth settings without compromising component tolerances or surface finish. Reduced downtime through optimised coating and chip control The advanced coating system reduces friction and thermal load at the cutting zone, which helps maintain a sharper edge and diminishes microchipping. Together with an optimised chipformer, this leads to improved evacuation of swarf and fewer interruptions for manual cleaning or re-trimming. The result is a productive turning process with lower cycle variability and higher effective machining time per tool. Practical selection and application guidance for workshop use Choosing the correct insert grade and geometry is essential for stable results; the WSM23S grade is specifically targeted at challenging materials that generate heat and resist cutting, such as rostfreier Stahl and Titan. When combined with appropriate cutting data and a secure clamping seat, operators will benefit from consistent edge life and reduced scrap rates. For machine-specific parameters and tip recommendations, technical advice based on the intended alloy and machining strategy is advisable. For application-specific advice or to procure the Walter Tools GX24-2E300N02-CE4 WSM23S insert through Metav Werkzeuge, please contact Metav Werkzeuge for tailored recommendations and material-matching support Technical Data Article number/SKU: GX24-2E300N02-CE4-WSM23S-WALTER Product: indexable turning insert ISO designation: GX24-2E300N02-CE4 WSM23S Series / Grade: Tiger·tec Silver / WSM23S Geometry code: 2E300N02-CE4 Manufacturer: Walter Tools Material groups: S / M Facts Applicable material groups: M (rostfreier Stahl), S (Superalloys / Titan) Coating technology: Tiger·tec Silver Cutter base: coated carbide grade Typical application: heavy-duty turning, challenging alloys Special features Coated carbide grade WSM23S Optimised chipformer for stable swarf control Designed for rostfreier Stahl and heat-resistant superalloys Robust cutting edge for long tool life FAQ What materials is this insert suitable for? The GX24-2E300N02-CE4 WSM23S insert is optimised for machining rostfreier Stahl (material group M) and heat-resistant superalloys including Titan (material group S). Which series and coating does the insert use? The insert belongs to the Tiger·tec Silver series and uses a coated carbide construction described by the WSM23S grade to enhance wear resistance and thermal stability. What does the geometry code 2E300N02-CE4 indicate? The geometry code 2E300N02-CE4 denotes the insert’s chipforming and clearance geometry, engineered to deliver reliable chip control and a stable cutting edge under heavy cutting conditions. How does WSM23S improve process reliability? WSM23S combines a wear-resistant substrate with a tailored coating to reduce edge degradation and support consistent process security, especially when machining materials prone to built-up edge and high thermal loads. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
GX24-2E300N02-CF5 WSM23S WSM23S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WSM23S grade delivers reliable chip control and extended edge life for demanding materials; ideal for stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. GX24-2E300N02-CF5 WSM23S indexable turning insert – Tiger‑tec Silver for stainless steel and superalloys (Walter Tools) A GX24-2E300N02-CF5 WSM23S indexable turning insert engineered for secure chip formation and sustained cutting‑edge stability in high‑temperature alloys and stainless steel. Tiger‑tec Silver coating for edge stability Optimised chip control with CF5 geometry Suitable for stainless steel and superalloys Consistent performance under heavy cuts High performance where materials fight back The Tiger‑tec Silver coating paired with the WSM23S carbide grade provides a balance of wear resistance and thermal stability that benefits operations on tough-to-machine workpieces. As a coated carbide solution, the insert supports continuous cutting by reducing flank wear and improving resistance to built‑up edge. The result is a more predictable tool life and fewer interruptions on the production floor, which translates into higher throughput and lower per‑part machining costs. Predictable chip control and geometry benefits The CF5 chipbreaker geometry (2E300N02‑CF5) is designed to generate compact, controllable chips even under variable feed and depth‑of‑cut conditions. Optimised chip evacuation reduces recutting and surface defects, enhancing first‑pass part quality. This geometry helps to maintain a stable cutting edge, supporting longer uninterrupted cycles and reducing the need for secondary finishing operations. Process security that supports productivity Built for the ISO 513 material groups M and S, this insert delivers process security when machining stainless steel and heat‑resistant superalloys. Stable edge behaviour under thermal stress means fewer unexpected tool changes and more consistent dimensional results. The combination of grade and geometry enables predictable machining windows, simplifying tool selection and increasing machine utilisation across batch and single‑piece work. Practical machining guidance for a smooth start For reliable performance with these materials, pair the insert with appropriate feeds and toolholder rigidity and monitor coolant strategy according to machine and setup. The insert’s coated carbide construction and chip control features reduce the likelihood of built‑up edge when machining ductile, work‑hardening alloys. Referencing ISO classifications helps to select cutting conditions that balance tool life and surface finish, providing a straightforward route to process optimisation. Choose Walter Tools' Tiger‑tec Silver insert for demanding stainless steel and superalloy turning operations — contact Metav Werkzeuge for tailored application advice and prompt supply. Technical data Article number: GX24-2E300N02-CF5-WSM23S-WALTER Designation: GX24-2E300N02-CF5 WSM23S Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM23S Core specifications Material group: S / M Coating: Tiger‑tec Silver (coated carbide) Geometry / chipbreaker: 2E300N02‑CF5 SKU: GX24-2E300N02-CF5-WSM23S-WALTER Applications & special features Suitable for stainless steel (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Designed for stable chip formation Engineered for improved edge life and wear resistance FAQ What materials is this insert intended for? The GX24‑2E300N02‑CF5 WSM23S insert is intended for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating improves thermal resistance and reduces abrasive wear, leading to longer edge life and more consistent machining results with difficult materials. What benefit does the CF5 geometry provide? The CF5 chipbreaker promotes compact chip formation and reliable evacuation, which reduces recutting and helps to maintain surface quality during turning operations. Is this insert suitable for high feed or heavy depth‑of‑cut applications? The combination of WSM23S grade and CF5 geometry supports robust performance under heavier cuts, offering stable cutting edges and predictable tool life in demanding processes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the brands mentioned. The offered article is an original, brand‑new product from the manufacturer.
GX24-2E300N02-CK8 WK1 WK1 Wendeplatten - Walter Tools
Combining the WK1 uncoated carbide grade with the 2E300N02-CK8 chipbreaker, this insert delivers stable chip formation and predictable edge life for industrial turning tasks; order the GX24-2E300N02-CK8 WK1 directly via Metav Werkzeuge or consult our specialists for application-specific advice. GX24-2E300N02-CK8 WK1 Drehwendeschneidplatte – uncoated carbide, 2E300N02-CK8 chipbreaker, Walter Tools GX24-2E300N02-CK8 WK1 is a precision indexable turning insert designed for production grinding and general turning operations where consistent chip control and reproducible cutting results are required Uncoated carbide grade WK1 2E300N02-CK8 chipbreaker geometry Open-series Walter material range Stable edge life for reliable turning Improved machining efficiency through controlled chip formation The combination of uncoated carbide and the 2E300N02-CK8 chipbreaker provides a technical basis for consistent chip evacuation and reduced interruptions in production. The specified chipbreaker geometry is engineered to influence chip curl and breakage, which in turn lowers the risk of entanglement and tool damage. For planning purposes, this leads to a measurable increase in machine uptime and contributes to predictable cycle times when the insert is used within the recommended parameter window. Clear guidance on applications and compatibility As part of Walter Tools’ open series, the insert offers flexibility across varied turning tasks; however, material compatibility should be checked against the supplied product matrix before deployment. The WK1 grade is an uncoated carbide class and is best applied where its wear characteristics match the workpiece and machining strategy. If additional confirmation is required, Metav Werkzeuge’s technical team can provide cutting-parameter recommendations and help align the insert to the specific machining scenario. Durable edges for repeatable process results The design focus of this grade supports edge life stability and repeatable performance in batch production. By relying on a consistent cutting geometry and proven chip control, the insert supports process reliability and reduces the frequency of unplanned tool changes. Where repeatability is critical, integrating the insert into a monitored tool-management routine helps secure steady surface quality and reduced scrap rates. Practical integration and handling advice for production This indexable turning insert is intended for industrial tooling systems that accept the ISO designation and the specified chipbreaker. Correct clamping, recommended feeds and speeds, and regular inspection of the cutting edge are practical measures that extend service life. For bespoke setups or unusual materials, request application advice to ensure the insert matches fixture and machine capabilities while maintaining the desired productivity. Contact Metav Werkzeuge for tailored cutting parameters and to source original Walter Tools GX24-2E300N02-CK8 WK1 inserts for reliable, repeatable turning results Technical data Article number / SKU: GX24-2E300N02-CK8-WK1-WALTER Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Grade: WK1 Chipbreaker: 2E300N02-CK8 Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Facts No specific dimensional or cutting-parameter data provided in supplied fields Special features Uncoated carbide grade WK1 Chipbreaker geometry 2E300N02-CK8 Open-series material classification Intended for turning / indexable insert applications FAQ What materials is this insert suitable for? The GX24-2E300N02-CK8 WK1 is part of an open series; material suitability must be verified against the Walter Tools product matrix to determine optimal matches. Is the insert coated or uncoated? This grade, WK1, is an uncoated carbide class, offering predictable wear characteristics for defined turning operations. What is the role of the 2E300N02-CK8 chipbreaker? The 2E300N02-CK8 chipbreaker is designed to improve chip curl and breakage, supporting stable chip formation and smoother machining cycles with the Walter Tools insert. Can the insert be used in high-production environments? Yes, the GX24-2E300N02-CK8 WK1 is engineered for production turning where consistent edge life and process reliability are priorities, provided machining parameters match the application. Where to source application parameters for this insert? Metav Werkzeuge can supply recommended cutting data and application guidance to ensure the Walter Tools insert is used with optimal feeds and speeds. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original factory-new product of the manufacturer, Walter Tools.
GX24-2E300N02-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating, the WSM33S carbide grade and the UF4 chipbreaker yields stable cutting edges and secure chip control when machining stainless steels and heat-resistant alloys; benefit from longer tool life and consistent production output. Order the GX24-2E300N02-UF4 WSM33S turning insert directly via Metav Werkzeuge or ask our consultants if needed. GX24-2E300N02-UF4 WSM33S Turning Insert (Tiger·tec Silver) – Walter Tools The GX24-2E300N02-UF4 WSM33S is a coated indexable turning insert engineered for productive machining of stainless steels and heat‑resistant superalloys in precision turning applications Tiger·tec Silver coating for high thermal stability WSM33S grade for tough, heat‑resistant materials Precise chip control with UF4 chipbreaker geometry Reliable edge life for continuous production turning Increased productivity on stainless and high‑temperature alloys The insert’s design focuses on delivering measurable production benefits when machining materials classified as ISO group M and S. The combination of a thermally tolerant Tiger·tec Silver coating and the WSM33S grade reduces the tendency for built‑up edge and premature flank wear, which translates to fewer tool changes and higher machine uptime. For shops processing bars, shafts or shaped components from stainless steels or nickel‑based superalloys, this means more consistent cycle times and improved first‑pass yield. The working principle is straightforward: enhanced thermal resistance maintains cutting edge integrity, supporting stable cutting parameters and repeatable results. Coating and grade explained for better cutting stability The Tiger·tec Silver coating is a multi‑layer CVD/PVD hybrid developed to withstand high temperatures and abrasive wear during hard and sticky material cutting. Paired with the WSM33S coated carbide grade, the insert offers a balance of toughness and wear resistance tailored to difficult‑to‑machine alloys. In practical terms, the coating reduces thermal softening while the substrate grade resists chipping; this synergy extends edge life and helps maintain surface finish quality. For less experienced staff, think of the coating as a thermal shield and the grade as a robust backbone — together they allow safer, faster cutting on challenging materials. UF4 chipbreaker: consistent chips and safer machining The UF4 chipbreaker geometry is engineered to produce predictable, controlled chips under typical turning conditions for tough alloys. Controlled chip formation reduces entanglement, protects the workpiece surface and lowers the risk of tool damage from erratic chip behaviour. From a process perspective, reliable chip control simplifies fixturing and disposal strategies in automated lines, reducing cycle interruptions. The geometry is particularly effective in finishing and semi‑finishing passes where dimensional accuracy and surface quality matter; a well‑chosen chipbreaker also contributes directly to operator safety and machine cleanliness. Process reliability and application guidance This indexable insert suits industrial turning operations with a focus on repeatability and profitability. The GX24‑2E300N02‑UF4 geometry and WSM33S grade work well in both single‑pass finishing and multi‑pass roughing when cutting stainless steels and heat‑resistant alloys. For best results, pair the insert with appropriate insert seatings and verify toolholder rigidity; higher cutting speeds and lower feed rates often benefit from the coating’s thermal performance. Walter Tools’ design intent for this insert is to offer a productive balance between tool life and surface quality, helping production engineers meet delivery targets without compromising component tolerances. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver turning inserts and to arrange a technical consultation adapted to specific production needs: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: GX24-2E300N02-UF4-WSM33S-WALTER Item: Turning insert GX24-2E300N02-UF4 WSM33S Manufacturer: Walter Tools Facts Grade: WSM33S Coating series: Tiger·tec Silver Geometry / chipbreaker: 2E300N02-UF4 Applications / Special features Suitable for stainless steels (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Material designation: S / M FAQ What materials is this insert designed for? This turning insert is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), utilising the WSM33S grade and Tiger·tec Silver coating for these demanding materials. How does the Tiger·tec Silver coating benefit machining performance? The Tiger·tec Silver coating on the WSM33S grade improves thermal stability and wear resistance, which helps maintain cutting edge integrity and extends tool life during continuous turning of high‑temperature alloys. What is the role of the UF4 chipbreaker geometry? The UF4 chipbreaker is configured for predictable chip formation, offering consistent chip control that reduces entanglement, improves surface quality and supports uninterrupted production cycles. Is this insert suitable for finishing and semi‑finishing operations? Yes, the insert’s combination of grade and coating provides a balance of toughness and wear resistance that is suitable for both finishing and semi‑finishing when machining stainless steels and superalloys. Which Walter Tools product designation should be referenced when ordering? Refer to the designation GX24‑2E300N02‑UF4 WSM33S and the SKU GX24‑2E300N02‑UF4‑WSM33S‑WALTER when specifying this turning insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX24-2E300N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Silver coating and the WSM23S grade for secure machining of stainless steels and heat‑resistant alloys; the combination of edge stability and targeted chip control supports consistent cycle times and reliable part quality. Order the insert directly via Metav Werkzeuge or consult the team for application advice. GX24-2E300N02-UF8 WSM23S indexable turning insert — Tiger·tec Silver, for stainless steels and superalloys (Walter Tools) The GX24-2E300N02-UF8 WSM23S is an indexable turning insert designed for demanding applications in machining stainless steels and heat‑resistant superalloys, combining a coated‑carbide grade with a dedicated chipbreaker. Tiger·tec Silver coated carbide grade WSM23S Optimised for stainless steels and superalloys Stable cutting edge for heavy-duty turning Chipbreaker 2E300N02-UF8 for secure chip control Consistent performance for difficult-to-machine materials The WSM23S grade, part of the Tiger·tec Silver family, is a coated carbide formulation developed for materials that generate heat and tend to work‑harden. Its primary benefit is edge stability under thermal and mechanical load, which reduces the risk of premature flank wear and built‑up edge formation when turning stainless steels and similar alloys. In practice, this means fewer unscheduled tool changes and more predictable tool life, supporting steady production runs and easier planning of tool replacement intervals. Improved productivity through controlled chip formation The integrated chipbreaker 2E300N02-UF8 is engineered to produce short, manageable chips in tougher alloys. Reliable chip control lowers the likelihood of chip entanglement and protects the cutting edge from damaging contact, enabling higher material removal rates with maintained surface integrity. For process engineers this translates into measurable gains in machine utilisation and a reduction in secondary handling for chip disposal, while preserving component surface quality. Application guidance and machining benefits Designed for ISO groups M and S, the insert suits operations involving stainless steels (M) and heat‑resistant superalloys / titanium (S). Cutting geometry and insert selection should consider part tolerance and finish requirements; the coated grade supports moderately aggressive parameters while retaining a focus on surface quality. When combined with appropriate cutting speeds, feeds and coolant strategy, the insert helps achieve consistent part dimensions and a reproducible surface finish, making it suitable for serial production and repair tasks where alloy behaviour is challenging. Contact Metav Werkzeuge today for tailored recommendations on cutting data and to secure the Tiger·tec Silver inserts best suited to the machining task Technical data SKU: GX24-2E300N02-UF8-WSM23S-WALTER Designation: GX24-2E300N02-UF8 WSM23S Product type: Turning insert Brand: Walter Tools Core specifications Grade: WSM23S Series: Tiger·tec Silver Chipbreaker: 2E300N02-UF8 Material class: Coated carbide ISO material groups: M, S Materials & features Suitable for stainless steels (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Designed for heavy‑duty and difficult‑to‑machine materials Stable cutting edge and heat resistance Coated carbide construction for improved wear performance FAQ Which materials are best machined with this insert? The GX24-2E300N02-UF8 WSM23S insert is optimised for stainless steels and heat‑resistant superalloys/titanium, corresponding to ISO groups M and S. What does the WSM23S grade offer compared with general-purpose grades? WSM23S, part of the Tiger·tec Silver family, provides enhanced edge stability and temperature resistance compared with uncoated or standard grades, improving performance on materials that generate heat or tend to work‑harden. How does the 2E300N02-UF8 chipbreaker affect machining? The 2E300N02-UF8 chipbreaker produces short, controlled chips that reduce the risk of chip entanglement and protect the cutting edge, aiding safe, continuous turning operations in difficult alloys. Is this insert suitable for serial production? Yes; the insert’s combination of a coated carbide grade and a dedicated chipbreaker is aimed at delivering consistent tool life and part quality in repetitive production. Can the insert be used for finishing stainless steel components? Depending on insert geometry and cutting parameters, the grade supports operations that require good surface integrity; choice of insert geometry and machine settings will determine final surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are used for clarification only. There is no affiliation between our company and the brands mentioned. The offered item is an original, factory-new product of the respective manufacturer.
GX24-2E300N03-GD3 WKP23S Wendeplatten - Walter Tools
The combination of cost-effective coated carbide, reliable chip control and broad applicability for steel and cast iron supports continuous, productive turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. GX24-2E300N03-GD3 WKP23S indexable turning insert – Tiger·tec Silver grade for steel and cast iron, Walter Tools The GX24-2E300N03-GD3 WKP23S is an indexable turning insert designed for efficient material removal in steel and cast iron applications, offering a robust coated-carbide grade and a chipbreaker geometry tailored for stable machining. Tiger·tec Silver coating technology Optimised for steel and cast iron machining Coated carbide grade WKP23S for wear resistance Maximised productivity with consistent edge life The insert’s Tiger·tec Silver technology and WKP23S grade combine to offer elevated thermal stability and adhesive-wear resistance under typical turning conditions. The coated carbide construct reduces flank and crater wear, which means longer usable edge life and fewer tool changes—an advantage when throughput and predictable cycle times matter. In practice, this results in improved process repeatability when machining components in steel and cast iron, where heat generation and abrasive wear govern tool life. The engineering behind this product emphasises chip control and a durable cutting edge to keep production runs steady and reduce unplanned stoppages. Predictable chip formation and improved surface outcomes The specified chipbreaker (2E300N03-GD3) is designed to generate short, manageable chips in both P- and K-group materials, helping to prevent tangled swarf and minimising interruptions at the workstation. By promoting stable chip formation the geometry contributes directly to consistent component finish, reducing rework and inspection time. The insert’s balance of toughness and hardness supports reliable edge retention under interrupted cuts and variable feed conditions, improving surface finish while preserving process security. This stability benefits both small-batch specialist operations and longer production series by lowering the risk of unexpected tool failure and associated downtime. Application guidance and compatibility in real operations This grade is engineered for the typical demands of ISO P (steel) and ISO K (cast iron) materials; the ISO P and ISO K compatibility means the insert adapts to a wide material range in general machining. The coated carbide substrate offers wear resistance under abrasive cast-iron conditions and sufficient toughness for ferritic and alloyed steels. Toolholder selection should match the insert geometry and clamping style listed in toolholder catalogues; the design supports common turning tool systems used in heavy-duty and precision lathe setups. Backed by Walter Tools manufacturing standards, the insert is suited to operations where predictable tool life and repeatable part quality are priorities, contributing to measurable increases in productivity. For application-specific recommendations on Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for material matching, batch recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: GX24-2E300N03-GD3-WKP23S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP23S Facts Chipbreaker: 2E300N03-GD3 Applicable groups: P (steel), K (cast iron) Material base: Coated carbide Special features Optimised chip control geometry High wear resistance and thermal stability Suitable for a wide steel and cast iron range Designed for predictable edge life and process security FAQ What materials is this insert suitable for? The GX24-2E300N03-GD3 WKP23S insert is specified for ISO P (steel) and ISO K (cast iron) applications and is tailored to the typical chip and wear behaviour of those groups. What does the Tiger·tec Silver series provide? Tiger·tec Silver denotes a coating and substrate concept that increases thermal resistance and wear performance; in the GX24-2E300N03-GD3 WKP23S it helps to extend edge life and maintain consistent cutting behaviour. How does the chipbreaker 2E300N03-GD3 affect machining? The chipbreaker promotes short, controlled chips across steel and cast iron, improving swarf management and reducing interruptions caused by long, stringy chips. Is this insert suitable for interrupted cuts? Yes, the combination of coated carbide and the WKP23S grade provides a balance of toughness and hardness that supports interrupted cutting and variable feed conditions. Which toolholders are compatible with this geometry? The insert’s designation corresponds to standard indexable turning geometries; match the GX24-2E300N03-GD3 form to holders listed in toolholder catalogues for clamping style and seat angle compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
GX24-2E300N03-GD3 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of a high‑temperature capable grade and a proven Tiger·tec Silver coating for consistent performance in demanding turning applications; the combination of WSM33S substrate and a purpose‑designed chipbreaker helps to maintain edge life and stable chip formation in stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. GX24-2E300N03-GD3 WSM33S indexable turning insert — Tiger·tec Silver for stainless steels and superalloys | Walter Tools The GX24-2E300N03-GD3 WSM33S is an indexable turning insert engineered for heavy and difficult‑to‑machine materials, offering a coated‑carbide grade tuned to improve cutting‑edge stability and chip control in stainless steels and heat‑resistant alloys. Tiger·tec Silver coating for extended tool life Grade WSM33S optimised for stainless steel Stable cutting edge under high temperatures Reliable chip control in tough alloys High thermal stability for consistent machining results The Tiger·tec Silver coating and the WSM33S coated‑carbide grade combine to deliver enhanced thermal resistance and wear performance during captive turning operations. For materials that tend to work‑harden, the coating reduces friction at the cutting zone and helps to limit edge deterioration, which results in more predictable tool behaviour and improved component surface quality. This feature is particularly beneficial where cycle times and repeatability are critical. Improved edge life and controlled chip formation The insert’s composition supports stable cutting‑edge behaviour under the thermal and mechanical stress typical of machining stainless steels and superalloys. The specified chipbreaker 2E300N03‑GD3 is matched to the grade to promote regular chip segmentation and evacuation, reducing the risk of built‑up edge and vibration. Such controlled chip formation contributes directly to fewer interruptions and a steadier process window on conventional and CNC turning centres. Productivity gains from material‑specific engineering Designed for productivity, the insert provides a balance between wear resistance and toughness that suits demanding production environments. The combination of coated‑carbide technology and a geometry optimised for heavy feeds helps to maintain cutting performance across longer tool life intervals, which can translate into increased machine uptime and lower tool‑handling frequency. The geometry designation identifies the chipbreaking approach and cutting‑edge form, aiding process planning and insert selection. Clear application scope and selection guidance Conforming to ISO material groupings, the insert is suitable for group M (stainless steels) and group S (heat‑resistant superalloys and titanium), offering a reliable choice when a higher degree of thermal and mechanical loading is expected. The GX24‑2E300N03‑GD3 WSM33S is therefore well suited to serial production and specialist jobs requiring consistent surface finish and dimensional stability. Selection of the exact insert geometry and cutting parameters should be aligned with machine rigidity and workpiece clamping to maximise the advantages of the grade and chipbreaker. Contact Metav Werkzeuge for tailored machining advice and to discuss the Walter Tools GX24-2E300N03-GD3 WSM33S insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX24-2E300N03-GD3-WSM33S-WALTER Name: Drehwendeschneidplatte GX24-2E300N03-GD3 WSM33S Walter Tools Product type: indexable turning insert Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 2E300N03-GD3 Numbers / Core technical data Applicable ISO material groups: M, S Material designation: coated carbide Intended use: heavy/difficult machining of stainless steels and superalloys Special features Coating technology: Tiger·tec Silver Material: WSM33S coated carbide Suitable for: stainless steels, heat‑resistant superalloys and titanium Manufacturer: Walter Tools FAQ What materials are compatible with the GX24-2E300N03-GD3 WSM33S insert? The GX24-2E300N03-GD3 WSM33S insert is compatible with ISO material groups M and S, specifically designed for stainless steels and heat‑resistant superalloys (including titanium where geometry permits). What advantage does the Tiger·tec Silver series provide? The Tiger·tec Silver coating on the WSM33S grade reduces friction and improves thermal resistance, supporting longer tool life and more consistent cutting performance under elevated temperatures. How does the 2E300N03-GD3 chipbreaker affect machining? The 2E300N03‑GD3 chipbreaker promotes controlled chip segmentation and evacuation, which leads to reduced risk of built‑up edge and improved process stability when machining tough alloys. Is this insert suitable for serial production environments? Yes, the combination of the WSM33S grade and Tiger·tec Silver coating offers wear resistance and edge stability that supports repeatable results and higher productivity in serial turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation or partnership between our company and the named brands. The offered item is original, factory‑new merchandise from the stated manufacturer.
GX24-2E300N03-GD3 WSM43S WSM43S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM43S grade for secure chip control and steady cutting‑edge life when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for tailored tooling advice. GX24-2E300N03-GD3 WSM43S – Turning insert Tiger‑tec Silver for stainless steel and superalloys | Walter Tools The GX24-2E300N03-GD3 WSM43S is a coated carbide turning insert from the Tiger‑tec Silver series, engineered for reliable performance in stainless steel and heat‑resistant superalloys where stable chip formation and wear resistance are essential Tiger‑tec Silver coating for high temperature stability Optimised chipbreaker 2E300N03‑GD3 for secure chip control Suited to stainless steel (ISO group M) and superalloys (S) Walter Tools grade WSM43S for enhanced tool life Longer tool life through advanced coating technology The Tiger‑tec Silver coating provides improved thermal resistance and reduced flank wear compared with uncoated grades, which translates into longer tool life and fewer index changes. For workshop managers and production planners this means a measurable reduction in downtime and tool consumption; the applied coating technology supports consistent performance under elevated cutting temperatures, helping to maintain dimensional accuracy and surface finish when turning demanding materials. Reliable chip control and process security in heavy‑duty turning The 2E300N03‑GD3 chipbreaker geometry is designed to promote stable chip formation and efficient evacuation during continuous turning operations. Stable chips reduce the risk of built‑up edge and surface damage, improving component quality and cycle stability. In practice, this results in fewer interruptions for manual cleaning, a safer machining environment and a more predictable process window for stainless steel and heat‑resistant superalloys. Grade selection that matches demanding materials The WSM43S grade is a coated carbide specifically developed for applications involving materials that are prone to work hardening and high heat generation. Its composition and coating balance toughness and wear resistance to withstand the thermal and mechanical stresses associated with machining stainless steel and superalloys. Selecting this grade supports repeatable cutting performance, particularly on components where surface integrity and tool‑life consistency are priorities. Practical benefits for production and procurement Using this turning insert reduces the frequency of tool changes and streamlines inventory through a robust, multipurpose grade suitable for several high‑alloy materials. Maintenance teams will appreciate the fewer stoppages for insert changes, while process engineers gain a broader stable cutting window when fine‑tuning feeds and speeds. The insert’s compatibility with standard turning toolholders and the clear ISO‑based material grouping simplify tool selection and procurement planning. For application advice or to secure the GX24‑2E300N03‑GD3 WSM43S insert in production quantities, contact Metav Werkzeuge for individual recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-2E300N03-GD3-WSM43S-WALTER Product type: Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WSM43S Chipbreaker: 2E300N03‑GD3 Manufacturer: Walter Tools Facts Applicable material groups (ISO 513): M, S Coating technology: Tiger‑tec Silver Material of insert: coated carbide Special features Designed for stainless steel and heat‑resistant superalloys Optimised chip control for continuous turning Improved thermal resistance and wear behaviour Suitable for applications requiring stable cutting edges FAQ What materials is this insert designed for? The GX24‑2E300N03‑GD3 WSM43S insert is intended for stainless steel (ISO group M) and heat‑resistant superalloys and titanium alloys (ISO group S), offering balanced wear resistance and toughness for those materials. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver reduces flank wear and increases thermal stability on the WSM43S grade, which helps the insert sustain higher cutting temperatures and extend index life in continuous turning tasks. Is the 2E300N03‑GD3 chipbreaker suitable for long, continuous turning cycles? Yes, the chipbreaker geometry is optimised for secure chip formation and evacuation, making it well suited to long, continuous turning operations where consistent chips and surface quality are required. Can this insert be used on common turning toolholders? The GX24‑2E300N03‑GD3 format corresponds to standard insert geometries and is compatible with matching toolholders designed for this insert type; toolholder choice should follow the insert clamping and seat specifications. What production benefits can be expected when switching to this grade? Adopting the WSM43S grade with Tiger‑tec Silver coating typically leads to fewer insert changes, improved process stability and more consistent surface finishes when machining stainless steel and superalloys. Trademarked names and product designations are the property of their respective owners. Brand names are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
GX24-2E300N03-GD6 WSM23S WSM23S Wendeplatten - Walter Tools
Die Kombination aus hoher Verschleißfestigkeit der Tiger‑tec Silver Beschichtung und der optimierten 2E300N03‑GD6 Spanformer garantiert stabile Spanbildung und längere Standzeiten bei der Zerspanung hitzebeständiger Werkstoffe; bestellen über Metav Werkzeuge oder Kontaktaufnahme für eine individuelle Einsatzberatung möglich. GX24-2E300N03-GD6 WSM23S – Indexable turning insert, Tiger‑tec Silver (Walter Tools) The GX24-2E300N03-GD6 WSM23S is an indexable turning insert engineered for productive machining of stainless steels and heat‑resistant superalloys, offering a balance of edge stability and consistent chip control Tiger‑tec Silver coating for enhanced wear resistance Optimised 2E300N03‑GD6 chipbreaker for controlled chips Suited to stainless steels and superalloys High productivity with reliable edge stability The insert delivers consistent cutting performance in demanding materials thanks to the combination of a robust substrate and the Tiger‑tec Silver coating. This pairing reduces flank wear and supports a stable cutting edge, which in turn lowers the frequency of tool changes and machine downtime. For production environments processing rostfreie Stähle or nickel‑based alloys, the improved wear behaviour translates into measurable uptime benefits and more predictable tool life. Better chip control reduces rework and cycle time The 2E300N03‑GD6 chipbreaker is tuned for secure chip formation when machining ductile, heat‑sensitive alloys. Controlled chips minimise the risk of surface damage and clogging in the coolant and chip conveyor, resulting in fewer interruptions. By addressing chip evacuation at the geometry level, the insert contributes directly to shorter cycle times and reduced secondary operations, supporting a leaner process flow. Optimised for tough-to-machine materials Designed specifically for materials that generate high temperatures at the cutting zone, the grade WSM23S emphasises thermal stability and edge protection. The coated cemented carbide substrate resists crater wear and micro‑chipping under thermal load, maintaining dimensional accuracy over longer tool life. For shops facing variable batch sizes or mixed materials, this insert offers a dependable option to achieve consistent surface quality and repeatable tolerances. Practical application advice and handling benefits The insert’s geometry and coating combination make it particularly suitable for turning operations on shafting or components in rostfreie Stähle and heat‑resistant alloys where built‑up edge and rapid wear are common issues. When integrating the insert into an existing toolholder programme, attention to cutting data (feed, depth of cut, and cutting speed) adapted to the workpiece material will maximise the benefit of the Tiger‑tec Silver technology. Replacement procedures are straightforward, supporting quick tool changes and minimal machine stoppage. Contact Metav Werkzeuge for tailored cutting data, application support and recommendations for integrating Walter Tools Tiger‑tec Silver inserts into production Technical data Article number: GX24-2E300N03-GD6-WSM23S-WALTER Label: Drehwendeschneidplatte GX24-2E300N03-GD6 WSM23S Walter Tools Manufacturer / Brand: Walter Tools Core data Series: Tiger‑tec Silver Grade: WSM23S Chipbreaker: 2E300N03‑GD6 Designs and special features Coating: Tiger‑tec Silver (coated cemented carbide) Material class suitability: rostfreie Stähle (M), hitzebeständige Superlegierungen / Titan (S) Product type: Indexable turning insert (Drehwendeschneidplatte) Typical benefits: stable chip formation, wear resistance, optimised chip control FAQ What materials is this insert designed for? The GX24‑2E300N03‑GD6 WSM23S insert is formulated for rostfreie Stähle (stainless steels) and heat‑resistant superalloys, offering thermal stability and edge protection for these groups. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WSM23S grade enhances wear resistance and reduces flank and crater wear, enabling longer tool life and more consistent surface finish when machining demanding alloys. Which chipbreaker should be selected for heavy stainless turning? The 2E300N03‑GD6 chipbreaker integrated in this insert is optimised for controlled chip formation in ductile, heat‑prone materials and is recommended for turning applications on stainless steels and similar alloys. Can this insert be used for finishing and semi‑finishing? Yes, the combination of geometry and the WSM23S grade supports both semi‑finishing and finishing passes, providing stable cutting edges and reliable surface quality in consecutive operations. Is special coolant or machining strategy required? No unique coolant is mandatory; however, adapting cutting speeds and using appropriate coolant strategies for rostfreie Stähle and superalloys will enhance performance and extend insert life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-2E300N03-GD6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM33S grade for improved tool life and secure chip formation when machining stainless steel and heat‑resistant alloys; consult Metav Werkzeuge for application advice and ordering. GX24-2E300N03-GD6 WSM33S Drehwendeschneidplatte, Tiger‑tec Silver (stainless steel & superalloys) – Walter Tools The GX24-2E300N03-GD6 WSM33S is a high‑performance turning indexable insert designed for productive machining of stainless steel and heat‑resistant superalloys, delivering stable edges and consistent chip control. Tiger‑tec Silver coating for extended tool life WSM33S grade for stable cutting edges Optimised chip control for stainless steel (M) Reliable performance on heat‑resistant alloys (S) Consistent productivity through advanced coating and grade The combination of the Tiger‑tec Silver coating with the WSM33S carbide grade supports a low cost‑per‑part approach by extending tool life and reducing edge wear. For components made from stainless steel and high‑temperature alloys, the coating enhances thermal resistance and wear protection, which helps to maintain cutting edge integrity over longer cycles. This results in fewer insert changes and more predictable production planning, contributing directly to improved throughput and lower downtime. Secure chip control and geometrical advantages The insert’s chipbreaker designation 2E300N03‑GD6 and its geometry focus on optimised chip control, particularly when cutting materials prone to built‑up edge and poor heat conduction. Stable chip formation reduces the risk of interrupted cuts and operator intervention, while the specific geometry supports consistent surface finish and dimensional repeatability. These characteristics are especially relevant in batch production where reproducibility and process stability are critical. Application range and material suitability explained This grade is intended for machining the ISO groups M and S: M for stainless steels and S for heat‑resistant superalloys and titanium. The grade’s balance between toughness and thermal resistance enables secure cutting under the demanding conditions presented by these materials. In practical terms, the insert is suitable for workpieces where heat generation and edge stress are high and where a combination of process security and surface quality is required. Integration into workshop processes and holder compatibility The insert is supplied under the Tiger‑tec Silver series, allowing integration into established Walter Tools toolholder systems. Its designation and standard geometry make it compatible with common turning tool assemblies used in industrial production. When mounted correctly, the insert contributes to stable cutting forces and repeatable seating, which supports predictable maintenance intervals and efficient inventory management of indexable tools. Contact Metav Werkzeuge for tailored application support and availability of Walter Tools inserts; the consultants will advise on the optimal grade and geometry for specific stainless steel and superalloy tasks Technical data SKU: GX24-2E300N03-GD6-WSM33S-WALTER Article designation: GX24-2E300N03-GD6 WSM33S Product type: Turning indexable insert Grade/Sort: WSM33S Series: Tiger‑tec Silver Facts Chipbreaker: 2E300N03-GD6 Material designation: S / M ISO designation: GX24-2E300N03-GD6 WSM33S Special features Coating: Tiger‑tec Silver (coated carbide) Suitable for stainless steel (M) Suitable for heat‑resistant superalloys and titanium (S) Manufacturer: Walter Tools Intended use: Heavy‑duty turning and machining of hard‑to‑machine materials FAQ Is this insert suitable for machining stainless steels? The GX24-2E300N03-GD6 WSM33S insert is designed for stainless steels (ISO group M) and supports secure chip formation and edge stability during such operations. What are the main advantages of the Tiger‑tec Silver coating? The Tiger‑tec Silver coating on the WSM33S grade increases thermal resistance and reduces flank wear, which extends insert life and improves process reliability when machining demanding materials. Can the insert be used for titanium and superalloys? Yes; the insert’s designation and WSM33S composition make it suitable for heat‑resistant superalloys and titanium (ISO group S), offering enhanced edge stability under high thermal loads. What does the chipbreaker code 2E300N03‑GD6 indicate? The chipbreaker code denotes the specific geometry engineered for controlled chip shaping and evacuation, optimised for stainless steels and difficult‑to‑cut alloys to reduce interruptions and improve surface finish. Which toolholders are compatible with this insert? The insert follows common Walter Tools mounting standards for turning inserts; compatibility depends on the toolholder family and seat geometry—refer to Walter Tools toolholder specifications for exact matching. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation or endorsement by the respective trademark holders; the offered item is an original, brand‑new product from the manufacturer Walter Tools.
GX24-2E300N03-UA4 WKP13S WKP13S Wendeplatten - Walter Tools
Die hochwertige Walter Tools Wendeschneidplatte kombiniert Tiger-tec Silver Beschichtung mit der WKP13S Sorte; daraus resultieren verbesserte Verschleißfestigkeit und stabile Spanbildung bei der Bearbeitung von Stahl und Gusseisen. Profitieren von konstanter Standzeit und optimiertem Spanverhalten für produktive Drehprozesse. Bestellen direkt über Metav Werkzeuge oder Rücksprache mit den technischen Beratern für anwendungsspezifische Empfehlungen. Drehwendeschneidplatte GX24-2E300N03-UA4 WKP13S – coated carbide insert for steel and cast iron | Walter Tools The GX24-2E300N03-UA4 WKP13S is a coated carbide turning insert engineered for reliable, high-performance turning of steel and cast iron components, offering consistent edge life and controlled chip formation Tiger-tec Silver coating for high wear resistance WKP13S grade: coated carbide for steel and cast iron Optimised chipformer for stable chip control Consistent edge life for productive turning Longer tool life through advanced coating technology The combination of Tiger-tec Silver coating and the WKP13S carbide grade delivers a measurable improvement in wear resistance and edge stability. The multilayer coating reduces abrasive wear and thermal softening during interrupted or continuous cuts, which translates into fewer insert changes and higher machine utilisation. For workshops focused on productivity, the coated carbide composition supports longer intervals between regrinds and replacement, helping to maintain steady cycle times and reduce unplanned downtime. Stable chip control for improved surface finish and process reliability The built-in chipformer (designation 2E300N03-UA4) is designed to produce predictable, short chips when machining materials classified as P and K according to ISO 513. That means better chip evacuation when turning both steel and cast iron, reducing the risk of surface damage and tool interference. Stable chip control also contributes to a more consistent surface finish and lower scrap rates, providing a rational efficiency gain that is easy to quantify in serial production environments. Practical machining characteristics and suitability This insert is optimised for typical turning applications where catalogue- and geometry-dependent selection determines the precise performance envelope. The coated carbide substrate is tailored to cope with the heat and shear typical of steel machining while the same coating chemistry offers resistance to the abrasive wear encountered with cast iron. For process engineers, the main advantage is predictable behaviour across a broad material mix, reducing the need for frequent tooling switches and simplifying tool management. Application support and procurement clarity Specification-driven procurement benefits from the clear designation and manufacturer pedigree: the insert belongs to the Tiger-tec Silver series and is supplied by Walter Tools, a recognised name in precision cutting solutions. For complex or high-value components, pairing the right insert geometry with the WKP13S grade can make the difference between marginal and repeatable results. Technical consultants at Metav Werkzeuge can advise on the optimal insert geometry and cutting data to match machine capabilities and component tolerances, ensuring the solution aligns with production targets Contact Metav Werkzeuge for tailored recommendations and to procure the Walter Tools GX24-2E300N03-UA4 WKP13S insert for robust, productivity-focused turning operations Technical Data SKU: GX24-2E300N03-UA4-WKP13S-WALTER Product: Drehwendeschneidplatte Grade: WKP13S Series: Tiger-tec Silver Chipbreaker: 2E300N03-UA4 Manufacturer: Walter Tools Facts No numerical cutting data provided in the dataset No dimensional specifications provided in the dataset Special features Coating: Tiger-tec Silver Material designation: P / K (steel and cast iron) Coated carbide insert Optimised chipformer for controlled chip breakage Suitable for catalogue-/geometry-dependent turning applications FAQ What materials is this insert suitable for? The GX24-2E300N03-UA4 WKP13S insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What benefit does the Tiger-tec Silver coating provide? Tiger-tec Silver coating on the WKP13S grade improves wear resistance and thermal stability, extending edge life and supporting consistent performance in tough turning operations. How does the chipbreaker designation affect machining? The 2E300N03-UA4 chipformer is designed to produce short, manageable chips when turning P and K materials, improving evacuation and helping to protect the workpiece surface. Is this insert suitable for interrupted cuts? Yes; the coated carbide grade and the Tiger-tec Silver technology provide enhanced resistance to thermal and mechanical shock, making the insert resilient in many interrupted and continuous turning scenarios. Where can advice on cutting data and geometry be obtained? Metav Werkzeuge offers application consulting to match insert geometry and cutting parameters to machine and component requirements, ensuring efficient implementation of the Walter Tools solution. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of a global network of precision-tool manufacturers and is recognised for process-secure cutting solutions. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory-new product of the manufacturer.
GX24-2E300N03-UA4 WKP33S WKP33S Wendeplatten - Walter Tools
Benefit from a combination of robust coated carbide and an optimised chipbreaker geometry to maintain steady production and predictable tool life; the WKP33S grade delivers reliable performance when machining steel and cast iron. Order directly via Metav Werkzeuge or contact the team for tailored machining advice. GX24-2E300N03-UA4 WKP33S Drehwendeschneidplatte – Tiger‑tec Silver for steel and cast iron (Walter Tools) GX24-2E300N03-UA4 WKP33S is an indexable turning insert developed for efficient removal of material in industrial turning operations, optimised for steels (P) and cast iron (K) using the Tiger‑tec Silver coating technology. Tiger‑tec Silver coating for tool life Optimised chipbreaker 2E300N03‑UA4 Suitable for steel and cast iron Consistent edge stability and productivity Long‑term wear resistance for demanding turning tasks The Tiger‑tec Silver coating paired with the WKP33S grade creates a wear‑resistant surface that reduces abrasive wear and thermal deterioration during standard and heavy‑duty turning. Coated carbide means a thin, engineered layer bonded to a hard carbide substrate; this layer improves resistance to temperature and chemical interaction with the workpiece, which in turn extends edge life and reduces the need for frequent index changes. For production environments processing unalloyed and alloyed steel or abrasive cast iron, this combination supports longer tool cycles and more consistent component tolerances. Predictable chip control that improves cycle times The built‑in chipbreaker geometry 2E300N03‑UA4 is designed to control chip formation under common turning feeds and depths, producing short, manageable chips that are less likely to foul the toolpath. Effective chip control lowers the risk of interrupted cuts, reduces secondary manual cleaning, and enables higher effective cutting parameters where appropriate. By stabilising chip flow and dissipating cutting heat more evenly, the insert helps to maintain surface finish quality with fewer rework cycles, contributing directly to measurable productivity gains on shopfloor turning centres. Process reliability and straightforward integration into tool systems Manufactured for predictable behaviour in serial machining, the insert offers consistent edge stability across batches and applications, which simplifies process documentation and tool management. Compatibility with common indexable insert holders means rapid replacement and minimal machine downtime. The coated cutting grade is engineered to balance toughness and hardness, so operators benefit from both reliable wear resistance and reduced chipping in interrupted cuts. For operations seeking reproducible results and fewer tool‑related stoppages, this indexable geometry supports efficient setups and repeatable performance. For high‑process reliability with Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for application support, availability and recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-2E300N03-UA4-WKP33S-WALTER Product: Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WKP33S Chipbreaker: 2E300N03‑UA4 Material designation: P / K Manufacturer: Walter Tools Facts Suitable material groups: P (steel), K (cast iron) Material application steel: yes Material application cast iron: yes ISO designation: GX24-2E300N03-UA4 WKP33S Special features Coated carbide cutting grade Optimised chip control geometry Designed for industrial turning processes Stable edge formation and broad material coverage FAQ Which materials is this insert suitable for? The GX24-2E300N03‑UA4 WKP33S insert from Walter Tools is suitable for steel (P) and cast iron (K) machining according to the grade and series specifications. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP33S grade improves wear resistance and thermal stability, resulting in extended edge life and more consistent machining performance. How does the 2E300N03‑UA4 chipbreaker affect production? The 2E300N03‑UA4 chipbreaker delivers predictable, short chips that reduce chip handling issues, lower the likelihood of cut interruptions and support higher effective cutting rates. Is this insert suitable for stainless steel? Stainless steel (rostfreier Stahl) suitability is not specified for this grade; the GX24-2E300N03‑UA4 WKP33S is primarily intended for steel and cast iron as listed. Can the insert be used for interrupted cuts? The coated carbide construction of the WKP33S offers a balance of toughness and hardness, providing reasonable resistance to chipping in many interrupted‑cut scenarios, depending on cutting parameters and machine setup. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
GX24-2E300N03-UD4 WKP13S WKP13S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating combined with the WKP13S grade for extended tool life and steady chip control when machining steel and cast iron; this results in more productive turning operations and predictable replacement intervals. Order the GX24-2E300N03-UD4 WKP13S turning insert directly via Metav Werkzeuge or consult their advisors for application-specific guidance. GX24-2E300N03-UD4 WKP13S indexable turning insert — Tiger·tec Silver, Walter Tools GX24-2E300N03-UD4 WKP13S is an indexable turning insert designed for productive machining of steel (P) and cast iron (K), delivering wear resistance and consistent chip formation across a range of turning tasks. Tiger·tec Silver coating for wear resistance WKP13S grade for stable cutting edge Engineered for steel (P) and cast iron (K) Precise chip control with UD4 geometry Higher output through advanced coating and grade The combination of the Tiger·tec Silver coating with the WKP13S cutting grade provides a noticeable improvement in wear resistance and thermal stability, which translates into longer tool life and fewer index changes. As a result, cycle times are steadier and machine uptime improves. The insert’s coated carbide composition is engineered to withstand the heat and abrasion typical of steel and cast-iron turning, so the user benefits directly from lower tooling costs per part and reduced process variation. Controlled chips and dependable cutting behaviour The integrated UD4 geometry chipbreaker promotes reproducible chip control, reducing interruptions caused by tangled or poorly formed chips. That controlled chip formation improves surface finish consistency and makes swarf handling safer and faster. The insert’s design focuses on a stable cutting edge, which keeps cutting forces predictable and supports repeatable machining results — a key advantage when meeting tight tolerances or running batch production. Practical handling and application advantages As an indexable insert, the component supports quick index changes and straightforward inventory management. The designation indicates compatibility with a variety of toolholders and turning geometries; selection of the exact geometry allows adaptation to specific operations. The grade is particularly suited for common steels and cast irons according to ISO groupings, helping to simplify grade selection and inventory across mixed-production shops. Backing from Walter Tools complements the technical benefits with proven manufacturing standards and global availability. For application-specific advice or to order the GX24-2E300N03-UD4 WKP13S directly, contact Metav Werkzeuge for expert guidance and fast delivery. Technical data SKU: GX24-2E300N03-UD4-WKP13S-WALTER Designation: GX24-2E300N03-UD4 WKP13S Product type: Indexable turning insert Brand: Walter Tools Grade: WKP13S Series: Tiger·tec Silver Facts Applicable materials: Steel (P), Cast iron (K) Chipbreaker / geometry: 2E300N03-UD4 Material composition: Coated carbide (WKP13S) UID: GX24-2E300N03-UD4-WKP13S-WALTER Special features Coating: Tiger·tec Silver Material group: P / K Stable cutting edge and good chip control Broad material coverage; designed for productive machining FAQ What materials is this insert suitable for? The GX24-2E300N03-UD4 WKP13S is designed for machining steel (P) and cast iron (K) according to ISO groupings, providing good wear resistance and chip behaviour on these materials. How does the UD4 geometry affect machining? The UD4 geometry serves as a chipbreaker that produces controlled chips and stabilises cutting forces, which supports consistent surface quality and fewer interruptions during turning. Is the WKP13S grade coated, and what is the benefit? Yes — the WKP13S grade belongs to the Tiger·tec Silver coating technology; the coating improves wear resistance and thermal stability, extending the insert’s service life in demanding turning operations. Can the insert be used in automated production cells? The insert’s consistent cutting behaviour and predictable wear characteristics make the GX24-2E300N03-UD4 WKP13S suitable for automated and repeatable production processes where tool-change predictability is important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
GX24-2E300N03-UD4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating and the WKP23S grade for reliable machining of steel and cast iron; the insert provides controlled chip formation and predictable wear behaviour. Order the GX24-2E300N03-UD4 WKP23S directly via Metav Werkzeuge or consult the technical team for application-specific guidance. GX24-2E300N03-UD4 WKP23S indexable turning insert — Tiger·tec Silver, for steel and cast iron (Walter Tools) GX24-2E300N03-UD4 WKP23S is an indexable turning insert designed for efficient machining of steels and cast iron, offering a coated carbide grade tailored to common turning applications Tiger·tec Silver coating WKP23S coated carbide grade Optimised for steel and cast iron ISO groups Controlled chip formation and predictable wear Increased process reliability for steel turning The combination of the Tiger·tec Silver series with the WKP23S grade offers a coated carbide solution specifically tuned to the thermal and tribological demands of machining steel. The grade is designed to manage the heat development and chipflow typical for ISO P applications, resulting in more consistent cutting behaviour and reduced unexpected downtime. This makes the insert well suited for medium-to-heavy turning operations where stability and reproducible results are essential. Consistent performance when machining cast iron For cast iron work, the geometry and material pairing support efficient removal of often short, breaking chips and tolerance of abrasive wear. The insert’s design helps maintain a stable edge and consistent component quality across batches, which is beneficial where repeatability and surface integrity are required. The result is fewer interruptions for edge changes and better control of scrap rates in cast-iron turning tasks. Productivity gains through predictable chip control Optimised chip formation reduces secondary operations and machine idle time. The chipbreaker code 2E300N03-UD4 contributes to controlled chip segmentation and evacuation, lowering the risk of tool interference and improving operator safety. With predictable chip behaviour, cycle times can be maintained more reliably, supporting higher throughput in production environments without sacrificing surface finish or dimensional accuracy. Practical application notes and compatibility The insert is applicable to ISO P (steel) and ISO K (cast iron) material groups and is supplied in the standard insert geometry indicated by the code. It serves as a versatile option where one needs a coated turning insert that balances wear resistance and chip control. For specific holder compatibility or recommendations for cutting parameters, refer to machine and workpiece requirements or request cutting data from the supplier to match feed and speed to the material and operation. For high-productivity turning tasks, contact Metav Werkzeuge to source the Walter Tools GX24-2E300N03-UD4 WKP23S from the Tiger·tec Silver range and receive application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-2E300N03-UD4-WKP23S-WALTER Designation: GX24-2E300N03-UD4 WKP23S Type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Chipbreaker: 2E300N03-UD4 Facts Applicable material groups: P (steel), K (cast iron) Substrate / grade: WKP23S (coated carbide) Product family code: GX24-series Special features Coating technology: Tiger·tec Silver Suitability: steel and cast iron machining Optimised for controlled chip formation Designed for predictable wear behaviour FAQ What materials is this insert intended for? The GX24-2E300N03-UD4 WKP23S insert is intended for ISO P (steel) and ISO K (cast iron) applications and has been developed to manage the typical chip formation and wear mechanisms of these materials. Which coating and grade are used on this insert? This indexable turning insert uses the Tiger·tec Silver coating and the WKP23S coated carbide grade to deliver balanced wear resistance and heat tolerance in turning operations. How does the chipbreaker code affect performance? The chipbreaker 2E300N03-UD4 provides controlled chip segmentation and evacuation, improving process reliability and reducing the likelihood of chip-related interruptions during turning. Is this insert compatible with standard turning toolholders? The geometry follows the GX24 series designation; compatibility depends on the holder type and clamping system. Verify the insert seat and clamping method against the GX24 specification before use. Can this insert be used for high-speed finishing? The grade and coating combination is optimised for stable cutting in steel and cast iron; recommended cutting parameters should be chosen according to the machine capability and workpiece material to achieve finishing or semi-finishing results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools) is a leading global manufacturer of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
GX24-2E300N03-UD4 WKP33S WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP33S carbide grade for reliable, wear‑resistant turning. The optimised 2E300N03‑UD4 chipbreaker geometry ensures consistent chip control and higher productivity; order directly via Metav Werkzeuge or request tailored application advice. GX24-2E300N03-UD4 WKP33S – Indexable turning insert by Walter Tools (Tiger·tec Silver, for steel & cast iron) The GX24-2E300N03-UD4 WKP33S is an indexable turning insert designed for efficient machining of steel and cast iron, combining a robust coated‑carbide grade with a precision chipbreaker for stable daily production Tiger·tec Silver coating for high wear resistance Optimised for steel and cast iron machining Coated carbide grade WKP33S for long tool life Reliable chip control with 2E300N03‑UD4 geometry Consistent cutting performance for steel and cast iron The combination of the WKP33S coated carbide grade and the Tiger·tec Silver technology delivers high wear resistance and a stable cutting edge in demanding operations. Designed for ISO group P (steel) and K (cast iron), this insert mitigates the typical heat and abrasive wear associated with these materials, which results in more consistent surface finish and extended tool life. The material‑specific design makes the grade suitable for a wide range of turning tasks without frequent re‑indexing, supporting smoother machining cycles and fewer unplanned tool changes. Precision chip control that boosts productivity The 2E300N03‑UD4 chipbreaker geometry is engineered to provide controlled chip formation and evacuation during continuous turning. By reducing the likelihood of long, tangled chips and promoting predictable breakage in cast iron, the insert lowers the risk of stoppages and tool interference. The geometry also aids in maintaining steady cutting forces, enabling higher material removal rates and reduced downtime. In short, the engineered chip control contributes directly to improved cycle times and more efficient shopfloor throughput. Versatility, repeatability and lower tooling costs As a coated carbide insert within the Tiger·tec Silver family, this grade emphasises repeatable performance and broad applicability. The insert integrates easily into standard turning toolholders and is suited to both roughing and finishing cuts depending on application geometry. The predictable wear behaviour reduces the frequency of tool replacements and simplifies tool management, contributing to overall cost‑efficiency in production. For operations requiring stable, long‑running processes, the insert supports reliable part quality and predictable tool change intervals. For application support or to discuss which insert geometry fits a specific turning task, contact Metav Werkzeuge for an expert recommendation and availability details. Technical data Article number: GX24-2E300N03-UD4-WKP33S-WALTER Product: Indexable turning insert Brand: Walter Tools Grade: WKP33S Series: Tiger·tec Silver Designation: GX24-2E300N03-UD4 WKP33S Material: P / K Chipbreaker: 2E300N03‑UD4 Facts Application groups: P (steel), K (cast iron) ISO suitability: Steel and cast iron (ISO P, ISO K) Coating technology: Tiger·tec Silver Carbide type: Coated carbide grade WKP33S Special features High wear resistance Stable cutting edge Good chip control for cast iron and steel Suitable for roughing and finishing turns Designed for consistent tool life and repeatable performance FAQ What materials is this insert suitable for? The GX24‑2E300N03‑UD4 WKP33S insert is suitable for steel (ISO P) and cast iron (ISO K) applications, reflecting the design intent of the Tiger·tec Silver grade. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP33S grade increases resistance to abrasive and adhesive wear, which improves tool life and helps maintain consistent part quality in prolonged runs. What is the purpose of the 2E300N03‑UD4 chipbreaker? The 2E300N03‑UD4 chipbreaker geometry promotes controlled chip formation and evacuation, reducing chip entanglement and supporting higher process stability during turning. Can this insert be used for finishing as well as roughing? Yes, the coated‑carbide grade and the chipbreaker geometry allow the insert to be applied in both roughing and finishing operations, depending on the chosen cutting parameters and toolholder setup. Is the WKP33S grade suitable for automated production environments? The WKP33S grade is engineered for repeatable performance and long tool life, making it well suited to automated and continuous production where predictability and low downtime are priorities. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only and do not imply any affiliation between our company and the trademark owners. The article offered is an original, brand‑new product from the stated manufacturer, and brand references are used solely to describe compatibility and provenance.
GX24-2E300N03-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM33S grade delivers reliable heat resistance and a stable cutting edge for demanding stainless steel and superalloy turning—ensuring longer tool life and consistent chip control. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific guidance. GX24-2E300N03-UD4 WSM33S — indexable turning insert, Tiger·tec Silver (Walter Tools) A GX24-2E300N03-UD4 WSM33S indexable turning insert designed for demanding turning of stainless steels and heat‑resistant superalloys, offering robust edge stability and optimised chip formation Tiger·tec Silver coating for heat resistance WSM33S grade for stainless and superalloys Stable cutting edge under high temperatures Consistent chip control for interrupted cuts Enhanced heat resistance for stable production The Tiger·tec Silver coating combined with the WSM33S grade provides elevated wear resistance and thermal stability under aggressive cutting conditions. This configuration reduces edge degradation during high temperatures, which in turn extends tool life and lowers changeover frequency. For operations processing stainless steel or heat‑resistant alloys, the result is fewer unscheduled interruptions and a more predictable machining cycle. Reliable chip control in challenging materials The insert geometry 2E300N03-UD4 is engineered to support controlled chip formation in materials classified as ISO M (stainless steels) and ISO S (superalloys and titanium). The designated chipbreaker stabilises swarf evacuation and lowers the risk of built‑up edge, improving surface finish and minimising rework. Technical users will appreciate the clear correlation between geometry and process behaviour, enabling safer feeds and cutting speeds with consistent outcomes. Improved productivity and process security By favouring a grade tuned for toughness and a coating optimised for heat shielding, the tool promotes process security and steady productivity in series turning. The insert’s performance characteristics translate into a reduced tooling inventory per workcell and more repeatable component quality. For manufacturers aiming to maintain throughput on demanding workpieces, the combination supports a cost‑efficient strategy without compromising operational reliability. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX24-2E300N03-UD4-WSM33S-WALTER Product type: Indexable turning insert Grade: WSM33S Series: Tiger·tec Silver Geometry / chipbreaker: 2E300N03-UD4 ISO designation: GX24-2E300N03-UD4 WSM33S Facts Material group suitability: S / M Application groups: ISO M (stainless steel), ISO S (superalloys, titanium) Article label: Drehwendeschneidplatte GX24-2E300N03-UD4 WSM33S Walter Tools UID: GX24-2E300N03-UD4-WSM33S-WALTER Special features Coating: Tiger·tec Silver Grade type: coated carbide Typical use: heavy stainless and heat‑resistant alloys Benefits: enhanced heat resistance, stable cutting edge, optimised chip control FAQ What materials is this insert intended for? The GX24-2E300N03-UD4 WSM33S insert is specified for stainless steel (ISO M) and heat‑resistant superalloys and titanium (ISO S), where its grade and coating support secure chip formation. How does the Tiger·tec Silver coating benefit turning operations? The Tiger·tec Silver coating increases thermal resistance and reduces flank wear, which helps the insert maintain a stable cutting edge during prolonged and high‑temperature cutting processes. Is this insert suitable for interrupted cuts? Yes, the geometry 2E300N03-UD4 and the WSM33S grade combine to provide robust edge stability suitable for interrupted and demanding turning operations. Can this insert improve surface finish on stainless components? Using this insert with appropriate cutting parameters improves chip control and reduces built‑up edge, which typically leads to more consistent surface quality on stainless steel workpieces. Where can application advice be obtained for this insert? Application and parameter recommendations are available from Metav Werkzeuge; the product is supplied as a Walter Tools Tiger·tec Silver insert and Metav Werkzeuge can advise on best practice. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is among the leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners. The item offered is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com