GX24-4F600N05-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the proven combination of thermal stability from the Tiger‑tec Silver coating, secure chip control from the 4F600N05‑UF4 chipbreaker and the wear‑resistant WSM33S grade for a reliable turning workflow; request application advice or order through Metav Werkzeuge for expert handling and logistics. GX24-4F600N05-UF4 WSM33S Turning insert, coated carbide, Tiger‑tec Silver — Walter Tools The GX24-4F600N05-UF4 WSM33S is a turning insert engineered for heavy‑duty machining of rostfreier Stahl and heat‑resistant superalloys, combining a dedicated chipbreaker geometry with a Tiger‑tec Silver coated carbide grade for secure cutting performance. Tiger‑tec Silver coated carbide grade WSM33S Optimised chipbreaker 4F600N05‑UF4 for secure chip control Suited for rostfreier Stahl and heat‑resistant alloys Robust cutting edge for consistent tool life Efficient machining of tough, heat‑generating materials The insert is designed to address the specific challenges of machining rostfreier Stahl and superalloys: high toughness, tendency to build up on the tool and strong heat generation. The WSM33S grade, a coated carbide formulation within the Tiger‑tec Silver family, provides elevated thermal resistance and controlled abrasion characteristics. Combined with the 4F600N05‑UF4 chipbreaker geometry, the component enables stable chip formation and reduced process variability, which translates into higher material removal rates and fewer interruptions for edge dressing or tool changes. Predictable tool life and process security for production Consistency in tool life is essential for productive turning operations. The WSM33S composition emphasises a stable cutting edge and improved wear behaviour under thermal load, reducing unexpected tool failures. The insert’s coated carbide surface supports heat management at the cutting zone, which lowers microchipping and flank wear. These properties contribute to process security and predictable replacement intervals, helping planners to maintain cycle times and minimise unplanned downtime in serial production environments. Practical guidance for application and setup Select the insert for applications that prioritise secure chip control and thermal stability when working with rostfreier Stahl or nickel‑based alloys and titanium. The 4F600N05‑UF4 chipbreaker is optimised to produce short, controllable chips in common turning strategies; suitable cutting data should be chosen with regard to workpiece hardness and lathe rigidity. For fine finishing of sensitive surfaces, moderate feed and stable clamping reduce the risk of built‑up edge. When in doubt about feed, speed or toolholder compatibility, Metav Werkzeuge can provide application support and recommended starting parameters. Contact Metav Werkzeuge for tailored machining advice and to arrange supply of Walter Tools Tiger‑tec Silver turning inserts, including delivery and application support Technical data SKU: GX24-4F600N05-UF4-WSM33S-WALTER Designation: GX24-4F600N05-UF4 WSM33S Product type: Turning insert Manufacturer: Walter Tools Core data Series: Tiger‑tec Silver Grade: WSM33S (coated carbide) Chipbreaker: 4F600N05‑UF4 Material groups: S / M Special features Coated carbide grade WSM33S Optimised for rostfreier Stahl and heat‑resistant superalloys Chipbreaker geometry 4F600N05‑UF4 for controlled chip formation Robust cutting edge, stable chip formation and thermal resistance FAQ What materials is this insert suitable for? The insert is intended for machining rostfreier Stahl and heat‑resistant superalloys; the WSM33S grade provides thermal stability and edge robustness for these material groups. Which chipbreaker is fitted to this insert and what is its advantage? The 4F600N05‑UF4 chipbreaker is designed for secure chip control and stable chip formation, reducing interruptions and improving surface consistency in turning operations. Is this insert part of a specific series and what does that mean? Yes, the insert belongs to the Tiger‑tec Silver series; this indicates a coated carbide technology optimised for thermal resistance and broad application coverage in demanding turning tasks. How does the WSM33S grade affect tool life? WSM33S is a coated carbide grade formulated to maintain a stable cutting edge under high temperatures, which helps to extend predictable tool life and reduce the frequency of tool changes. Who to contact for application data and ordering? For application parameters, compatibility checks or to arrange purchase, contact Metav Werkzeuge; their specialists can advise on optimal cutting data and logistics. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no association between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
GX24-4F600N30EM-1 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise CBN cutting grade and optimised chip control to maintain consistent cycle times and reduce unplanned tool changes; order or request application advice via Metav Werkzeuge for reliable integration into production. GX24-4F600N30EM-1 WBS10 CBN indexable turning insert – Walter Tools A GX24-4F600N30EM-1 WBS10 indexable turning insert designed for hard, wear-intensive turning tasks, ideal for machining hardened steels and, depending on grade, castings or superalloys CBN grade WBS10 for hard materials Optimised chip control for stable cutting Walter CBN series for long tool life Suitable for hardened steel and superalloys Precision turning in hardened materials for repeatable results The use of CBN as the cutting material in this grade (WBS10) provides a significant advantage when machining hardened steels: high thermal stability and superior wear resistance translate into predictable tool wear and consistent dimensional accuracy. CBN is the industrial standard where conventional carbides reach their limits; it resists abrasive contact and maintains the cutting edge at elevated temperatures, which helps to protect component tolerances and reduces the need for frequent regrinding. The insert’s design supports stable cutting under heavy feed rates while preserving surface finish. Stable chip control that keeps cycle times constant The integrated chipbreaker 4F600N30EM-1 has been developed to manage chip formation reliably under hard-turning conditions. Improved chip control reduces interruptions from chip evacuation issues and minimises the risk of rework or tool-holder damage. As a result, machining processes benefit from fewer stoppages and improved surface integrity, which in turn supports shorter throughput times and more predictable production planning. The combination of insert geometry and CBN grade ensures that chip behaviour remains consistent across a range of cutting parameters. Extended tool life for better operational economy A stable cutting edge and a wear-resistant grade reduce the frequency of insert changes, contributing directly to lower tooling costs per component and higher machine availability. Longer tool life decreases downtime for index changes and tool management, supporting continuous, high-productivity operations. By choosing a grade from the Walter CBN series, operators gain the advantage of repeatable performance under demanding conditions, which supports reliable process control and simplified tool inventory planning. Application guidance and material suitability to match process requirements The insert is part of the Walter CBN / hard grade series and the WBS10 grade is optimised for demanding, wear-intensive tasks; suitability for castings or superalloys depends on the specific product matrix and machining conditions. Material specification is catalogue-dependent, so matching the insert to the workpiece material and machining strategy is essential for optimal results. For process setup, confirm toolholder compatibility, cutting data and coolant strategy in the product documentation or the manufacturer’s matrix to ensure the chosen grade meets the component tolerance and surface finish targets. Contact Metav Werkzeuge to discuss which CBN grade and chipbreaker combination best suits a specific hard-turning application and to obtain the relevant product matrices for process planning Technical Data SKU: GX24-4F600N30EM-1-WBS10-WALTER Article designation: GX24-4F600N30EM-1 WBS10 Product type: indexable turning insert Manufacturer: Walter Tools Grade: WBS10 Series: Walter CBN / hard grade Chipbreaker: 4F600N30EM-1 Material: Catalogue-dependent Facts No measurable data provided in source Special features Intended for wear-intensive turning CBN cutting material (high thermal stability) Optimised chip control geometry Material suitability: hardened steels; possibly castings or superalloys — check product matrix Part of the Walter CBN / Hartstoff series Story trigger: indexable inserts (wendeplatten) FAQ What materials is this insert primarily intended for? The insert in grade WBS10 is primarily intended for hardened steels and, depending on the specific grade application, can be used for certain castings or superalloys; always verify suitability against the product matrix. How does the 4F600N30EM-1 chipbreaker benefit production? The 4F600N30EM-1 chipbreaker promotes controlled chip formation and evacuation, which reduces stoppages and supports consistent cycle times and surface integrity when machining with a CBN grade. Is this insert suitable for high-speed turning? As a CBN grade designed for hard materials, it offers high thermal stability; however, recommended cutting speeds and strategies should be checked in the product documentation to confirm suitability for specific high-speed applications. Can the insert be used across different toolholders? The insert’s ISO designation and geometry determine compatibility; verify the GX24-4F600N30EM-1 WBS10 seat and clamping requirements against the chosen toolholder before process start-up. What is the main advantage of choosing a Walter CBN grade? A Walter CBN grade like WBS10 provides enhanced wear resistance and repeatable edge stability for hard-turning tasks, which supports longer tool life and consistent component quality. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation purposes; there is no affiliation between our company and the trademark holders. The article offered is an original, brand-new product from the manufacturer.
GX24-4F600N30FS-M1 WDN10 Wendeplatten - Walter Tools
Take advantage of the polycrystalline diamond (PCD) grade and the engineered 4F600N30FS-M1 chipbreaker to achieve long-lasting edge life and predictable chip control in non‑ferrous and abrasive material machining; order through Metav Werkzeuge or request application advice from their consultants. GX24-4F600N30FS-M1 WDN10 indexable turning insert — PCD grade, chipbreaker 4F600N30FS-M1 — Walter Tools GX24-4F600N30FS-M1 WDN10 is an indexable turning insert optimised for high‑wear applications in non‑ferrous and abrasive, non‑iron materials, featuring a dedicated chipbreaker for stable machining Polycrystalline diamond (PCD) for high wear resistance Chipbreaker 4F600N30FS-M1 for stable chip control Optimised for non‑ferrous and abrasive materials Maximise tool life with PCD for abrasive non‑ferrous machining The polycrystalline diamond (PCD) grade used in this insert delivers markedly higher wear resistance than conventional carbide grades when machining abrasive, non‑iron materials. That resistance translates into fewer interruptions for tool changes and a lower frequency of regrinding, which supports continuous production. For shops working with aluminium alloys containing abrasive reinforcements or with other composite non‑ferrous components, the PCD composition reduces flank wear and preserves cutting geometry for longer, benefiting both repeatability and overall process uptime. Predictable chip formation and surface quality through engineered chip control An intentionally designed chipbreaker—the 4F600N30FS-M1—provides consistent chip control across typical turning conditions for non‑ferrous workpieces. Stable chip evacuation reduces the risk of chip entanglement and tool nose contact, improving operator safety and component finish. As a result, finishing passes can achieve a better surface finish with fewer corrective operations, and cycle times remain steady thanks to reduced manual chip clearance. Productivity gains from fewer tool changes and reliable process windows Using a PCD insert with a proven chipbreaker supports a leaner machining strategy: fewer insert swaps, fewer unplanned stoppages and a narrower process window to maintain. These factors combine to raise productivity per machine hour and lower cost-per-part on medium to high production runs. Prior to specification, suitability should be checked against the product matrix for material composition and cutting conditions to ensure optimal matching of insert grade and application. Practical handling: indexing, clamping and application notes As an indexable turning insert, this item is intended for standard toolholders compatible with its geometry. The benefit of indexing is the rapid restoration of a fresh cutting edge without full regrinding, shortening maintenance intervals. The insert is supplied in a PCD grade from Walter Tools and is designed for use where abrasive non‑ferrous materials require durable cutting edges; compatibility with specific toolholder styles and clamping systems should be confirmed before use to ensure correct seat and orientation. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools PCD inserts suited to specific non‑ferrous and abrasive material machining tasks Technical data Article number: GX24-4F600N30FS-M1-WDN10-WALTER Name: Drehwendeschneidplatte GX24-4F600N30FS-M1 WDN10 Walter Tools Type: Indexable turning insert Grade / Sort: WDN10 Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: 4F600N30FS-M1 Material designation: Katalogabhängig ISO designation: GX24-4F600N30FS-M1 WDN10 UID: GX24-4F600N30FS-M1-WDN10-WALTER Facts No measurable cutting data provided in the product record Special features Polycrystalline diamond (PCD) cutting material Optimised for non‑ferrous and abrasive, non‑iron materials Engineered chipbreaker for stable chips and improved surface finish Suitable for indexable insert toolholders where geometry matches FAQ What materials is this insert suitable for? The GX24-4F600N30FS-M1 WDN10 insert is intended primarily for non‑ferrous and abrasive, non‑iron materials, where the PCD grade offers superior wear resistance. How does the 4F600N30FS-M1 chipbreaker affect machining? The 4F600N30FS-M1 chipbreaker on the GX24-4F600N30FS-M1 WDN10 improves chip control, leading to more predictable chip evacuation and a more consistent surface finish in turning operations. Is this insert compatible with standard indexable turning toolholders? The GX24-4F600N30FS-M1 WDN10 is an indexable turning insert; compatibility depends on holder geometry and clamping style—match the insert seat and orientation before use. When should the product matrix be consulted? Consult the product matrix prior to specification to verify that the GX24-4F600N30FS-M1 WDN10 grade is appropriate for the targeted alloy composition and machining parameters. What are the operational benefits of choosing a PCD insert from Walter Tools? PCD inserts such as the GX24-4F600N30FS-M1 WDN10 typically provide extended tool life, fewer tool changes and consistent results in abrasive non‑ferrous machining, supporting higher throughput and reduced downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG brand (marketed as Walter Tools) is part of a global group of precision tool manufacturers. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article represents original, factory‑new merchandise from the manufacturer.
GX24-4F600N30TM-1 WBH20 WBH20 Wendeplatten - Walter Tools
Combining CBN performance, high wear resistance and an optimised chipbreaker, the GX24-4F600N30TM-1 WBH20 delivers consistent hard-turning results and reduced tool changes; order the insert through Metav Werkzeuge or consult their specialists for application support. GX24-4F600N30TM-1 WBH20 indexable turning insert with CBN grade for hardened steels — Walter Tools The GX24-4F600N30TM-1 WBH20 is an indexable turning insert designed for hard turning applications, providing wear-resistant performance for machining hardened steels. CBN grade WBH20 for hard turning Optimised chipbreaker 4F600N30TM-1 High wear resistance and edge stability Designed for hardened steels (ISO group H) Built for consistent hard-turning performance The combination of CBN cutting material and the WBH20 grade makes this insert particularly suited to high‑hardness machining tasks. CBN (cubic boron nitride) is engineered for sustained performance when machining hardened steels, offering far greater wear resistance than conventional carbide in this application. This results in predictable tool life and fewer unplanned tool changes, which in turn supports stable cycle times and lower per‑part machining costs. Predictable tool life and fewer process interruptions Thanks to a focus on edge stability and robust grade chemistry, the insert provides repeatable results across batches. The stable cutting behaviour reduces the need for frequent inspection and rework, enabling more efficient shift planning and higher machine utilisation. For production environments where repeatability matters, the insert minimises variance between components and helps to decrease scrap rates, supporting more economical and reliable manufacturing. Chip control and geometry explained The specified chipbreaker, 4F600N30TM-1, is optimised to produce controllable, short chips when cutting into high‑hardness materials. Reliable chip control reduces the risk of workpiece damage and shortens downtime caused by chip entanglement. The geometry and chipformer work together to ensure stable cutting forces and constant contact conditions, which also contribute to improved surface quality and consistent dimensional results. Integration into production and application guidance When integrating a CBN insert into existing processes, modest adjustments to feeds and speeds are typically required compared with carbide tooling; higher cutting speeds and conservative feeds often yield the best balance of tool life and surface finish. The Walter Tools CBN solution shown here is designed to be compatible with common turning toolholders and clamping systems, easing adoption on lathes and automatic turning centres. For precise parameter recommendations and trial setups, technical consultation is available to match the insert to the specific machine and component requirements. For hard turning challenges where long tool life and consistent surface quality are priorities, contact Metav Werkzeuge for tailored machining advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX24-4F600N30TM-1-WBH20-WALTER Article: GX24-4F600N30TM-1 WBH20 Type: Indexable turning insert Brand: Walter Tools Series: Walter CBN / Hartstoff Grade: WBH20 Chipbreaker: 4F600N30TM-1 Core data ISO material group: H Suitable for: hardened steels Application: hard turning Special features Cutting material: CBN (cubic boron nitride) Optimised for high wear resistance Designed for stable edge life and chip control FAQ What materials is this insert intended for? The GX24-4F600N30TM-1 WBH20 is intended for machining hardened steels (ISO group H) and is optimised for hard turning tasks. What does the WBH20 grade signify? WBH20 is Walter Tools’ CBN grade designed for high wear resistance and stable performance in demanding hard‑machining applications. How does the 4F600N30TM-1 chipbreaker affect production? The 4F600N30TM-1 chipbreaker promotes predictable chip formation and improved chip control, reducing interruptions and improving surface quality during hard turning. Is this insert compatible with standard turning toolholders? The GX24-4F600N30TM-1 WBH20 is designed for standard indexable turning tool systems; compatibility with a specific holder should be confirmed according to the holder’s clamping and seat geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
GX30-5E800N08-UD4 WKP23S WKP23S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating and the WKP23S grade for extended tool life and consistent process results. The geometry 5E800N08‑UD4 delivers reliable chip control in both steel and cast iron, supporting stable production. Order the insert directly via Metav Werkzeuge or consult the advisers for tailored machining recommendations. GX30-5E800N08-UD4 WKP23S — Indexable turning insert, Tiger·tec Silver (Walter Tools) GX30-5E800N08 WKP23S is an indexable turning insert engineered for efficient finishing and medium‑to‑rough turning of steel and cast iron components Tiger·tec Silver coating for long life WKP23S grade for steel and cast iron Stable cutting edge for consistent results Optimised chipbreaker 5E800N08-UD4 Longer tool life through advanced coating technology The combination of a coated carbide substrate and the Tiger·tec Silver technology reduces abrasive wear and extends edge life, resulting in fewer insert changes and less downtime. The WKP23S grade is tuned to handle the thermal and mechanical stresses typical of steel turning, improving average tool life and delivering lower total tooling costs. For manufacturers seeking measurable increases in uptime, the enhanced wear resistance translates directly into improved throughput and repeatability. Reliable chip control and process stability for P and K materials Designed for the ISO groups P (steel) and K (cast iron), the insert geometry 5E800N08‑UD4 provides controlled chip formation and evacuation under varied cutting conditions. The specified chipbreaker helps produce short, manageable chips in cast iron and stable curls in steels, reducing risk to the workpiece and machine. As an indexable insert, it offers consistent cutting performance across indexed edges, supporting predictable cycle times and surface integrity in production environments. Consistent results, easy integration and supplier backing The insert’s form factor and standard designation make it straightforward to integrate into existing turning toolholders and tool‑change routines. Backed by the Walter Tools portfolio, the grade and coating combination delivers process security and repeatable surface quality, aiding quality assurance and downstream operations. For application matching and optimisation, Metav Werkzeuge provides technical consultation to ensure the insert selection aligns with machining strategy and batch sizes, helping to reduce scrap and improve first‑pass yield. Contact Metav Werkzeuge for application advice and fast supply of Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for a machining recommendation based on component material and cycle times. Technical Data Article number: GX30-5E800N08-UD4-WKP23S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP23S Geometry / chipbreaker: 5E800N08-UD4 Suitable for: P / K (steel and cast iron) Facts SKU: GX30-5E800N08-UD4-WKP23S-WALTER Material code: P / K Application groups: Steel (P), Cast iron (K) Special features Coated carbide (Tiger·tec Silver) Optimised chip control for cast iron and steel Stable cutting edge for repeatable results Designed for industrial turning applications FAQ What materials is this insert suitable for? The GX30-5E800N08‑UD4 WKP23S insert is suitable for machining steel (ISO group P) and cast iron (ISO group K), reflecting the WKP23S grade tuning for those material behaviours. What does the designation 5E800N08‑UD4 indicate? The code denotes the insert geometry and the integrated chipbreaker design; 5E800N08‑UD4 is optimised for controlled chip formation in both steel and cast iron machining with consistent cutting forces. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating offers improved wear resistance and thermal stability, which reduces edge wear and increases the number of productive cuts per index, supporting longer tool life and fewer tool changes. Is this insert compatible with standard turning toolholders? Yes; the insert follows common indexable insert forms and can be used in compatible Walter Tools and third‑party turning toolholders that accept the specified insert geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new stock of the manufacturer Walter Tools.
GX30-5E800N08-UD4 WKP33S WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP33S grade for extended edge life and consistent chip control in steel and cast iron machining; order directly via Metav Werkzeuge or consult the technical team for geometry-specific recommendations. GX30-5E800N08-UD4 WKP33S indexable turning insert by Walter Tools — Tiger‑tec Silver coating for steel and cast iron GX30-5E800N08-UD4 WKP33S is an indexable turning insert designed for reliable performance in the machining of steels and cast irons, optimised for stable chip formation and predictable cutting results Tiger‑tec Silver coated for wear resistance WKP33S grade for long tool life Optimised chipbreaker 5E800N08‑UD4 Suitable for steel and cast iron (P / K) Consistent productivity through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WKP33S carbide grade delivers a balance of wear resistance and edge stability that supports steady machining cycles. The coated cemented carbide substrate is engineered to reduce abrasive wear and to withstand the thermal loads typical when cutting steel and cast iron, resulting in fewer unscheduled tool changes and more predictable productive time. The integrated chipbreaker 5E800N08‑UD4 promotes controlled chip formation, which helps maintain process stability and reduces interruptions on automated lathes and indexing systems. Predictable edge life and cost-efficient machining A coated insert of this design offers measurable advantages in process security: lower flank wear rates and improved resistance to built-up edge extend the interval between regrinds or replacements. The material and coating selection means that edge degradation tends to be gradual rather than abrupt, simplifying tool life estimation and cost calculation for batch production. In practical terms, this enhances throughput and contributes to overall machining economy without compromising surface quality or dimensional repeatability. Application flexibility and process integration Geometries and catalogue-specific recommendations determine the exact primary use, but the insert’s specifications indicate suitability across the ISO 513 groups P (steel) and K (cast iron). The design supports a wide variety of turning tasks where a stable cutting edge and reproducible chip control are required. When combined with appropriately selected tool holders and cutting parameters, the insert assists in achieving good surface finishes and reliable material removal rates, making it a pragmatic choice for general turning operations within mixed-production environments. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Silver inserts and obtain tailored guidance on insert geometry and holder compatibility for specific steel and cast iron applications Technical data SKU: GX30-5E800N08-UD4-WKP33S-WALTER Label: Drehwendeschneidplatte GX30-5E800N08-UD4 WKP33S Walter Tools Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP33S Chipbreaker: 5E800N08‑UD4 Material groups: P / K ISO designation: GX30-5E800N08-UD4 WKP33S Product type: Drehwendeschneidplatte Core data Applicable material groups: P (steel), K (cast iron) Coating family: Tiger‑tec Silver Insert designation: GX30-5E800N08-UD4 WKP33S Special features Coating technology: Tiger‑tec Silver Carbide grade: WKP33S (coated cemented carbide) Optimised chipbreaker: 5E800N08‑UD4 Designed for stable chip formation and good wear resistance Broad material coverage for steel and cast iron (ISO 513) FAQ What materials is this insert designed to machine? The insert is intended for machining steel and cast iron as indicated by the P and K material groups; selection should follow the specific component material and geometry. How does the Tiger‑tec Silver coating benefit cutting performance? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, which supports longer edge life and more consistent cutting behaviour under typical steel and cast iron conditions. What role does the WKP33S grade play in tool life? The WKP33S grade is a coated cemented carbide formulation tuned for abrasive and thermal stresses, contributing to reliable tool life and repeatable cutting performance. Is the chipbreaker suitable for both roughing and finishing operations? The 5E800N08‑UD4 chipbreaker is designed to produce controlled chips and can be applied across a range of cutting conditions; final selection depends on the required surface finish and specific insert geometry. Can this insert be used with standard turning tool holders? Yes — the insert follows standard ISO insert designations and can be mounted in compatible turning holders; adaptations may be required depending on the holder clamping style and machining task. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is original, brand‑new merchandise from the manufacturer. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
GX30-5E800N08-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of a WSM33S high‑performance grade, the Tiger·tec Silver coating and an optimised chipformer for reliable machining of demanding materials; order the inserts directly via Metav Werkzeuge or consult our specialists for process support. Drehwendeschneidplatte GX30-5E800N08-UD4 WSM33S — Tiger·tec Silver grade for stainless steels and superalloys | Walter Tools The Drehwendeschneidplatte GX30-5E800N08-UD4 WSM33S is an indexable turning insert engineered for heavy machining of stainless steels and heat‑resistant superalloys, combining a wear‑resistant grade with an advanced coated surface treatment. Tiger·tec Silver coating for heat resistance WSM33S grade for stable cutting edges Optimised 5E800N08-UD4 chipformer Designed for stainless steels and superalloys Longer tool life through heat‑resistant coating and robust grade The combination of the Tiger·tec Silver surface treatment and the WSM33S cemented‑carbide grade ensures increased resistance to thermal and mechanical wear during sustained cutting. This results in a more predictable tool life and fewer interruptions for insert changes, which directly supports higher component throughput. The coated surface reduces adhesion and edge build‑up when machining stainless steels, while the substrate composition maintains edge integrity under heavy loads. Better chip control for consistent surface finish The integrated 5E800N08-UD4 chipformer guides chip breakage and evacuation to reduce interruptions and heat concentration at the cutting zone. Improved chip control lowers the risk of built‑up edge and contributes to a steadier cutting process, which often translates into a superior surface finish and reduced need for rework. For workshop environments where cycle time and repeatability matter, stable chip formation is a concrete process advantage. Productivity gains from fewer tool changes and process stability By combining a modern coating with a cutting grade tailored to difficult‑to‑cut materials, the insert enables more productive machining cycles. The resulting stability at the cutting edge minimises unplanned stoppages and supports higher cutting parameters where appropriate, improving the cost‑efficiency of component production. The design emphasises a balance between resistance to abrasion and toughness, so the insert performs reliably across varied stainless and heat‑resistant alloys. Practical application guidance and material compatibility The geometry and grade are intended for turning operations on materials classified under ISO 513 groups M (stainless steels) and S (heat‑resistant superalloys and titanium). In practice, this means the insert is suited to operations that generate significant heat and demand controlled chip formation. Selection of appropriate cutting data and coolant strategy remains important: matching feed, speed and depth of cut to the workpiece and machine capacity will preserve the insert’s advantages and ensure consistent component quality. Contact Metav Werkzeuge to discuss the Walter Tools GX30-5E800N08-UD4 WSM33S insert and to receive tailored recommendations for machining stainless steels and superalloys Technical data SKU: GX30-5E800N08-UD4-WSM33S-WALTER Designation: GX30-5E800N08-UD4 WSM33S Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Silver Grade: WSM33S Chipformer: 5E800N08-UD4 Manufacturer: Walter Tools Facts Material groups: S / M Suitable for: stainless steels (M), superalloys/titanium (S) Coating technology: Tiger·tec Silver Insert geometry designation: GX30-5E800N08-UD4 Special features Coated cemented‑carbide grade Optimised chipformer for secure chip breaking Designed for heavy machining and high thermal loads Stable cutting edge for repeatable results FAQ What materials is this insert optimised for? The GX30-5E800N08-UD4 WSM33S insert is optimised for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal resistance and edge stability for these challenging materials. How does the Tiger·tec Silver coating help in machining? The Tiger·tec Silver coating improves resistance to heat and adhesion, which helps maintain cutting‑edge condition and extends the service life of the insert during prolonged machining of tough materials. What role does the 5E800N08-UD4 chipformer play? The 5E800N08-UD4 chipformer is designed to control chip shape and evacuation, reducing the risk of built‑up edge and enabling more consistent surface finishes and uninterrupted cycles. Is this insert suitable for high‑speed turning? The insert’s grade and coating are targeted at operations with high thermal load; appropriate cutting data should be selected to match machine capability and ensure process stability for higher cutting speeds. Can standard turning toolholders be used with this geometry? The insert uses the GX30‑5E800N08‑UD4 designation for its geometry; it is intended to be mounted in toolholders compatible with that insert geometry and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered article is an original, factory‑new product of the manufacturer.
GX30-5E800N08-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WSM33S grade optimised for high temperatures, and a chipbreaker geometry engineered for reliable chip control — a compact package that supports stable, productive turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. GX30-5E800N08-UF4 WSM33S – Indexable turning insert with Tiger·tec Silver coating for stainless steel and superalloys | Walter Tools GX30-5E800N08-UF4 WSM33S is an indexable turning insert designed for productive machining of stainless steel and heat-resistant superalloys in demanding turning operations Tiger·tec Silver coating for high heat resistance WSM33S grade for stainless and superalloys Stable cutting edge for long tool life Precise chip control reduces rework time Reliable edge life for demanding materials The WSM33S grade is a coated carbide formulated to resist thermal and mechanical load when machining workpieces that generate heat and adverse edge wear. Combined with the Tiger·tec Silver coating, the insert maintains edge stability over longer cycles, reducing changeover frequency and supporting consistent component quality. This performance-oriented combination is particularly valuable where tool life directly affects throughput and overall process efficiency. Consistent chip control reduces secondary operations The integrated chipbreaker 5E800N08-UF4 promotes predictable chip formation and evacuation, which lowers the risk of chip interference and surface damage. Predictable chip behaviour shortens cycle times and minimises manual chip handling or rework, thereby improving shop-floor cleanliness and safety. In production contexts where throughput and repeatability matter, stable chip control contributes directly to lower unit costs and fewer quality interventions. Coating technology that tolerates temperature spikes The Tiger·tec Silver technology provides enhanced heat resistance and abrasion protection compared with standard coatings. This means the insert copes better with the high interface temperatures encountered when cutting tough, low-thermal-conductivity alloys. The result is a reduced tendency to built-up edge and improved dimensional repeatability across long runs, which helps uphold tight tolerances without excessive tool management. Versatile application across ISO material groups M and S Classified for ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium), the insert suits operations where material properties vary between high toughness and poor thermal conductivity. The combination of grade, coating and geometry allows use across a range of workpiece alloys; geometry selection and cutting data should be matched to the specific alloy and hardness to obtain the best balance between tool life and surface finish. Geometry and handling aimed at process security The designation GX30-5E800N08-UF4 denotes the insert geometry and the specific chipbreaker form that together define cutting behaviour and clamping compatibility. The insert’s geometry supports secure seating in most standard turning toolholders and is engineered to provide repeatable cutting engagement, which enhances process security during automated or lights-out production. Clear specification of insert geometry simplifies tool-pool planning and tool-change logistics. Practical benefits for production planning Adopting a grade like WSM33S means fewer unscheduled stoppages for tool changes and a more predictable schedule for preventive tooling interventions. The combination of coating and chip control helps to maintain surface integrity and reduces scrap rates, delivering measurable improvements in OEE (overall equipment effectiveness) and part consistency. Specification notes and cutting data from Walter Tools should be consulted to fine-tune feeds and speeds for optimal results. For operations seeking robust performance on stainless and heat-resistant alloys, contact Metav Werkzeuge for availability and application guidance on the Walter Tools GX30-5E800N08-UF4 WSM33S insert: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: GX30-5E800N08-UF4-WSM33S-WALTER Designation: GX30-5E800N08-UF4 WSM33S Product type: Indexable turning insert Manufacturer: Walter Tools Facts ISO material groups: M, S Suitable for stainless steel: yes Coating technology: Tiger·tec Silver Grade: WSM33S Special features Coated carbide Chipbreaker: 5E800N08-UF4 Application: machining stainless steel and heat-resistant superalloys; titanium depending on geometry FAQ What materials is this insert designed for? The GX30-5E800N08-UF4 WSM33S insert from Walter Tools is specified for ISO groups M and S, making it suitable for stainless steel and heat-resistant superalloys; certain titanium applications are possible depending on insert geometry. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WSM33S grade improves heat resistance and wear performance, helping to maintain consistent cutting edges and reduce the incidence of built-up edge during tough turning operations. What is the role of the 5E800N08-UF4 chipbreaker? The chipbreaker 5E800N08-UF4 controls chip formation and evacuation to reduce chip-related interruptions and support a stable surface finish, which in turn lowers the need for secondary finishing or rework. Is this insert compatible with standard turning toolholders? The GX30 geometry and seat form are designed for use with common turning toolholders; verification of clamping compatibility with the toolholder supplier is recommended before use. How does the WSM33S grade affect tool life and process stability? WSM33S combines a thermally resilient coating with a robust carbide substrate to provide edge stability under heavy thermal and mechanical load, extending effective tool life and improving process repeatability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
GX30-5E800N12-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the WSM33S grade and Tiger·tec Silver coating to secure consistent edge stability and controlled chip formation during demanding turning operations; order directly via Metav Werkzeuge or consult the sales team for process integration. GX30-5E800N12-UD4 WSM33S indexable turning insert, Tiger·tec Silver coating for stainless steel and superalloys — Walter Tools A high-performance indexable turning insert, GX30-5E800N12-UD4 WSM33S, engineered for turning operations in stainless steel and heat-resistant superalloys where edge stability and predictable chip control are essential Tiger·tec Silver coating for heat resistance WSM33S grade for stable cutting edge Chipbreaker 5E800N12-UD4 for controlled chips Optimised for stainless steel and superalloys Proven thermal resistance and material coverage for demanding alloys The combination of the Tiger·tec Silver coating with the WSM33S grade provides elevated thermal protection and wear resistance tailored to difficult-to-machine materials. This formulation supports a stable cutting edge, reduces the risk of built-up edge and mitigates edge breakdown during elevated cutting temperatures. The result is fewer interruptions and a more predictable tool life when machining stainless steel (ISO group M) and heat-resistant superalloys (ISO group S). Consistent chip control for improved surface quality and safety The integrated chipbreaker 5E800N12-UD4 is designed to generate short, controllable chips under typical turning parameters for the specified material groups. Controlled chip formation reduces secondary operations for chip management, contributes to a safer machining environment and helps achieve a consistent surface finish. For production environments, this equates to fewer manual interventions and steadier cycle times. Enhanced process security and repeatable performance on the shop floor Coated, fine-grain carbide in this grade promotes wear resistance and contributes to repeatable results across batches. The insert’s construction aims to support process security by delivering stable cutting behaviour over extended runs. For production teams, the predictable performance reduces setup variations and supports higher overall equipment effectiveness through reduced tool changes and stoppages. Application advice and suitable uses across ISO material groups Classified for ISO groups M and S, this insert is suitable for turning operations where material toughness or poor heat conduction challenge the cutting edge. Typical applications include continuous and interrupted turning of stainless steel and nickel- or cobalt-based superalloys, particularly where long tool life and controlled chip flow are priorities. Selection of the correct insert geometry and cutting data should be matched to the workpiece and machine capability to maximise the benefits of the grade. Contact Metav Werkzeuge for availability and application advice on the Walter Tools GX30-5E800N12-UD4 WSM33S indexable turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX30-5E800N12-UD4-WSM33S-WALTER Article name: Drehwendeschneidplatte GX30-5E800N12-UD4 WSM33S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert ISO designation: GX30-5E800N12-UD4 WSM33S Facts Material groups: S / M Grade: WSM33S Chipbreaker: 5E800N12-UD4 Series: Tiger·tec Silver Suitable for stainless steel: Yes Special features Coated fine-grain carbide Stable cutting edge and wear resistance Optimised chip formation for turning Designed for difficult-to-machine alloys FAQ Which materials is this insert suitable for? The GX30-5E800N12-UD4 WSM33S indexable turning insert is designed for stainless steel (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S) as indicated by the WSM33S grade. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating improves thermal resistance and wear behaviour, supporting a more stable cutting edge and extended performance when machining tough or heat-generating materials. How does the 5E800N12-UD4 chipbreaker affect machining? The 5E800N12-UD4 chipbreaker produces short, controlled chips that aid in reliable chip evacuation, enhance safety at the tool/work area and contribute to a consistent surface finish. Is this insert suitable for interrupted cuts and heavy-duty turning? The WSM33S grade is formulated to offer robustness under demanding conditions; it delivers good edge integrity for both continuous and interrupted turning in appropriate geometries. How should the insert be matched to an application? Match the insert geometry and cutting data to the workpiece material and machining strategy; the material group (M or S) and chipbreaker define the initial selection criteria for optimum performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names belong to their respective owners. Mark names and registered trademarks are mentioned solely for descriptive purposes. There is no affiliation between our company and the referenced brands. The offered item is an original, factory-new product from the manufacturer.
GX30-5E800N40-RD4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP23S carbide grade and the proven insert geometry for reliable chip control and consistent productivity; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. GX30-5E800N40-RD4 WKP23S turning insert — Walter Tools, Tiger‑tec Silver coating A robust indexable turning insert designed for productivity in steel and cast iron machining, offering controlled chipbreaking and long, reliable service life. Tiger‑tec Silver coating for extended tool life WKP23S: coated carbide grade for steel and cast iron Geometry 5E800N40-RD4 for controlled chipbreaking Stable cutting edge for consistent surface finish High-performance grade for demanding turning operations The GX30-5E800N40-RD4 WKP23S insert combines a modern coated carbide substrate with the Tiger‑tec Silver technology to deliver a balance of wear resistance and toughness. This combination is engineered for the thermal and mechanical stresses encountered when machining steel and cast iron, enabling predictable tool behaviour and reduced downtime. By selecting a grade optimised for both abrasive cast materials and the adhesive wear typical of steels, process stability is increased and tool changes become less frequent, supporting continuous production flows. Reliable chip control and improved surface quality The specified chipbreaker geometry 5E800N40-RD4 is configured to shape and evacuate chips efficiently, reducing the risk of gouging and workpiece damage. Controlled chip formation translates into more consistent surface integrity and fewer interruptions for cleaning or chip clearing. In practice, this means improved component finish and fewer secondary operations. The geometry also contributes to stable cutting forces, which supports dimensional accuracy and predictable tool life during medium to heavy turning passes. Productivity advantages and application scope The insert’s design addresses everyday shop demands: long edge life, broad material coverage and consistent cutting performance. With the WKP23S grade and the Tiger‑tec Silver coating, the insert is particularly suited to general-purpose turning of unalloyed and alloyed steels as well as grey and nodular cast irons according to ISO 513 material groupings P and K. The result is a cost-effective solution for mixed-production environments where flexibility and repeatability are required. Compatibility with standard insert holders and straightforward indexability further simplifies tool management. Practical benefits for workshop integration Adopting these indexable inserts supports leaner tool inventories and predictable machining cycles. The combination of a hardened, coated cutting surface and a geometry tuned for chip control reduces the frequency of scrap due to poor surface quality and minimises machine idle time for tool changes. For operations that prioritise uptime, the consistent edge behaviour of this series helps maintain cycle times and keeps throughput steady under varying cutting parameters. For tailored application advice on Walter Tools Tiger‑tec Silver WKP23S turning inserts, or to place an order through Metav Werkzeuge, please contact Metav Werkzeuge GmbH by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: GX30-5E800N40-RD4-WKP23S-WALTER Product type: Turning insert / indexable insert Series: Tiger‑tec Silver Grade: WKP23S Geometry code: 5E800N40-RD4 Designation: GX30-5E800N40-RD4 WKP23S Brand: Walter Tools Core specifications Applicable material groups: P (steel), K (cast iron) Material composition: coated carbide Typical applications: turning of steel and cast iron Coating technology: Tiger‑tec Silver Special features and functions Engineered chipbreaker for controlled chips Balanced wear resistance and toughness Indexable design for simple replacement Broad material coverage for workshop flexibility FAQ What materials is this insert suitable for? The GX30-5E800N40-RD4 WKP23S turning insert from Walter Tools is suitable for steel (ISO P) and cast iron (ISO K) applications, making it versatile for mixed-production turning tasks. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKP23S grade improves wear resistance and thermal stability, which extends edge life and contributes to consistent machining performance under variable cutting conditions. Is the chipbreaker geometry suitable for heavy cuts? The 5E800N40-RD4 geometry is designed for controlled chip formation and evacuation; it performs well across a range of feeds and depths of cut, supporting stable machining during medium to heavier turning operations. Can this insert be used in standard toolholders? Yes, the insert is an indexable turning plate compatible with standard insert clamping systems designed for the GX30 geometry, facilitating straightforward integration into existing tooling setups. How is tool life improved compared with conventional grades? The combination of WKP23S coated carbide and the Tiger‑tec Silver coating offers improved resistance to both abrasive wear and thermo‑mechanical loading, resulting in longer, more predictable edge life in both steel and cast iron machining. Hersteller: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, new product from the manufacturer.
GX30-5E800N40-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Silver coating and the WSM33S grade for consistent edge stability and reliable chip control when machining stainless steel and high-temperature alloys; the combination reduces unplanned downtime and supports predictable production cycles. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. GX30-5E800N40-RD4 WSM33S indexable turning insert – Tiger·tec Silver grade for stainless steel and superalloys | Walter Tools The GX30-5E800N40-RD4 WSM33S is an indexable turning insert designed for demanding turning operations on hard-to-machine materials, offering a balance of heat resistance and stable cutting-edge performance for industrial production environments. Tiger·tec Silver coating for edge stability WSM33S grade for stainless steel and superalloys Optimised chip control 5E800N40-RD4 High process security and long tool life Reliable performance on hard-to-machine materials The coated carbide WSM33S grade, utilising Tiger·tec Silver technology, is engineered for the continuous demands of machining stainless steel and heat-resistant superalloys. In practice, this means the insert maintains a stable cutting edge under elevated temperatures and heavy cutting loads, reducing the risk of built-up edge and premature wear. For production planning, the improved thermal resistance and abrasive wear behaviour translate into longer tool life and fewer tool changes, which supports a smoother workflow and consistent component quality. The grade’s formulation targets the specific challenges posed by these materials—poor heat conductivity and high strength—so machinability improvements are realised without complex parameter adjustments. Stable cutting edge and controlled chip formation for safer turning The 5E800N40-RD4 chipbreaker geometry is tailored to generate predictable chip shapes and reliable evacuation in interrupted and continuous cuts. A chipbreaker channels and breaks chips close to the cutting zone, preventing long, entangling strands that can damage the workpiece or machine. This geometry, combined with the WSM33S grade, enhances chip control and preserves the integrity of the cutting edge, yielding reproducible surface finishes and minimised secondary operations. For operators less familiar with insert geometries, think of the chipbreaker as a passive control element that shapes chip flow to reduce manual intervention and improve cycle stability. Built for productivity and consistent production results Designed for industrial use, this indexable insert supports process security through repeatable performance and predictable wear behaviour. The coated design assists in maintaining dimensional accuracy over longer tool life, reducing measurement and rework effort across batches. Where consistency is critical, the insert’s combination of coating and grade simplifies machine setup: fewer trial cuts are required and results are more uniform between shifts. The brand reputation behind the product further reassures procurement and engineering teams that the component aligns with modern manufacturing demands for productivity and quality. For application-specific recommendations on machining stainless steel with Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored advice and current availability Technical data Article number: GX30-5E800N40-RD4-WSM33S-WALTER Designation: GX30-5E800N40-RD4 WSM33S Series: Tiger·tec Silver Grade: WSM33S Manufacturer: Walter Tools Facts Material groups: S / M Suitable for: stainless steel Chipbreaker: 5E800N40-RD4 Special features Coating: Tiger·tec Silver Grade type: coated carbide Optimised chip control and edge stability FAQ Which materials is this insert best suited for? The GX30-5E800N40-RD4 WSM33S insert is intended for machining stainless steel (ISO group M) and heat-resistant superalloys or titanium (ISO group S), where heat resistance and edge stability are essential. What distinguishes the WSM33S grade? WSM33S is a coated carbide grade within the Tiger·tec Silver technology family, formulated to combine wear resistance with thermal stability for challenging turning applications. How does the 5E800N40-RD4 chipbreaker affect machining? The 5E800N40-RD4 geometry improves chip control by breaking and guiding chips away from the cutting zone, reducing entanglement and supporting consistent surface finish and tool life. Can this insert be used for interrupted cuts? Yes, the insert’s combination of grade and chipbreaker geometry is suitable for interrupted and continuous turning where controlled chip formation and edge strength are required. What production benefits can be expected from this insert? Expect longer intervals between tool changes, improved process consistency and reduced risk of built-up edge when turning difficult materials thanks to the Tiger·tec Silver coating and the WSM33S grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mention of brand names in this description serves explanatory purposes only and does not imply any affiliation. The offered item is an original, factory-new product from the manufacturer Walter Tools.
GX30-5E800N40-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control, and targeted suitability for stainless steel and superalloys to maintain consistent productivity and fewer tool changes; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. Drehwendeschneidplatte GX30-5E800N40-RF8 WSM23S – indexable turning insert for stainless steel and superalloys (Walter Tools) A GX30-5E800N40-RF8 WSM23S indexable turning insert engineered for hard-to-machine alloys and rostfreier Stahl, optimised for stable cutting edges and reliable chip control. Tiger·tec Silver coating technology WSM23S wear-resistant carbide grade 5E800N40-RF8 chipbreaker for stable chips Optimised for stainless steel and superalloys Fewer interruptions through material-tailored performance The GX30-5E800N40-RF8 WSM23S insert combines the Tiger·tec Silver coating with a purpose-built coated carbide grade to address the specific challenges of machining stainless steel and heat-resistant alloys. These workpiece families tend to generate high temperatures and exhibit adhesive wear and built-up edge formation; the chosen coating and substrate balance thermal resistance and edge integrity to reduce premature wear. As a result, the tool maintains a stable cutting edge for longer intervals, which translates into fewer indexings and predictable production cycles. Predictable chip formation for process security The designated chip geometry, 5E800N40-RF8, ensures controlled chip formation under challenging conditions. A well-matched chipbreaker reduces the risk of long, entangling swarf and supports consistent evacuation in both roughing and light-finishing passes. The outcome is improved process security and a more consistent surface finish without sacrificing material removal rates. Explaining this in practical terms: the insert’s geometry directs chips into repeatable shapes, preventing sudden changes in cutting forces and enabling stable cycle times. Reduced tooling complexity and repeatable results Integrating a single carbide grade that covers S (heat-resistant superalloys, titanium) and M (rostfreier Stahl) workpiece groups reduces tooling variants in the tool crib. The combination of robust substrate and advanced coating simplifies grade selection for mixed-production environments while delivering repeatable performance across batch changes. For production planners this means fewer SKU types to manage and a more straightforward tooling strategy that still achieves consistent component quality. Robust choice for demanding operations Built for heavy-duty tasks, the insert’s construction focuses on long tool life and dependable cutting behaviour under thermal and mechanical stress. The WSM23S grade offers wear resistance and edge stability that support continuous operation in high‑temperature cutting zones, contributing to lower unplanned downtime. Where operators need a balance of surface quality and economy, this insert provides a technically justified option that helps sustain throughput without complex process adjustments. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and application-specific advice; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data SKU: GX30-5E800N40-RF8-WSM23S-WALTER Designation: GX30-5E800N40-RF8 WSM23S Product type: Drehwendeschneidplatte (indexable turning insert) Numbers / Core technical data Grade / series: WSM23S, Tiger·tec Silver Chipbreaker: 5E800N40-RF8 Material groups: S / M Designs / Special features Coating: Tiger·tec Silver (coated carbide technology) Application focus: rostfreier Stahl and heat-resistant superalloys Manufacturer brand: Walter Tools Indexable insert for turning operations FAQ What materials is this insert intended for? The GX30-5E800N40-RF8 WSM23S is designed for rostfreier Stahl (stainless steel) and S‑group materials such as heat‑resistant superalloys and titanium, offering tailored thermal and edge resistance for these demanding alloys. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver provides improved thermal stability and wear resistance; in combination with the WSM23S substrate, it reduces adhesive wear and helps maintain a stable cutting edge during prolonged engagement. What is the practical effect of the 5E800N40-RF8 chipbreaker? The 5E800N40-RF8 geometry produces controlled, repeatable chip forms, aiding swarf evacuation and reducing force fluctuations, which supports consistent surface finish and longer tool life. Can this insert be used for finishing rostfreier Stahl? Yes, depending on the chosen cutting data and machine rigidity, the insert supports both roughing and light finishing passes in stainless steel when set up with appropriate feeds and speeds. Is the insert compatible with standard turning tool holders? The insert follows common indexing and clamping conventions for turning inserts; verify seat and clamping compatibility with the chosen holder according to the insert designation. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Trademarks and trade names mentioned (including Walter Tools) are the property of their respective owners and are used here for descriptive purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
GX34-2E300L6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM33G carbide grade for extended edge life and secure chip control; this combination delivers reliable performance in demanding turning operations and improved process stability. Order the GX34-2E300L6-CE4 WSM33G turning insert via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. GX34-2E300L6-CE4 WSM33G indexable turning insert by Walter Tools — Tiger·tec Gold coating, for stainless steels and superalloys A precision indexable turning insert engineered for heavy-duty and heat‑resistant material applications, combining robust edge geometry with Walter Tools' Tiger·tec Gold coating technology for consistent performance in demanding environments. Tiger·tec Gold coated carbide grade Optimised for stainless steel (ISO M) Suitable for superalloys and titanium (ISO S) Robust cutting edge for demanding turning Proven durability and consistent cutting performance The Tiger·tec Gold coating paired with the WSM33G grade provides a balance of wear resistance and edge stability, reducing the risk of build‑up on the cutting edge during prolonged cycles. As a coated carbide insert, it is designed to maintain a sharp cutting edge under elevated temperatures, which supports longer tool life and fewer indexings. This results in steadier machining conditions, lower interruption rates and more predictable maintenance intervals for production workflows. Optimised for materials that challenge tool life Designed with ISO group suitability in mind, the insert performs reliably on stainless steel (ISO M) and superalloys/titanium (ISO S). These materials are known for poor thermal conductivity and work‑hardening tendencies; the geometry and coating of this insert improve chip control and reduce thermal loading at the cutting zone. In practice, this means fewer surface defects and more consistent dimensional results when turning tough alloys, making it a practical choice for components requiring high reproducibility. Integration into productive turning processes The insert’s geometry and chipbreaker designation support stable chip formation and evacuation under continuous cutting conditions, contributing to improved process security and part quality. For manufacturers aiming to increase throughput while maintaining surface quality, this indexable solution helps to reduce cycle variability and supports reliable series production. The combination of robust design and modern coating technology from Walter Tools contributes to predictable tool behaviour and fewer unscheduled tool changes. For application advice or to discuss suitability for specific alloys, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to request tailored recommendations for the Tiger·tec Gold WSM33G range Technical data SKU: GX34-2E300L6-CE4-WSM33G-WALTER Label: Drehwendeschneidplatte GX34-2E300L6-CE4 WSM33G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core data Series: Tiger·tec Gold Grade: WSM33G Chipbreaker / Geometry: 2E300L6-CE4 Material suitability: ISO M, ISO S Material designation: S / M Special features Coated carbide, Tiger·tec Gold technology Optimised for stainless steel and heat‑resistant superalloys Stable cutting edge for secure chip formation Article UID: GX34-2E300L6-CE4-WSM33G-WALTER FAQ What materials is this insert intended for? The GX34-2E300L6-CE4 WSM33G indexable turning insert is optimised for stainless steels (ISO M) and superalloys/titanium (ISO S), offering improved chip control and heat resistance for these demanding materials. Which coating and grade does the insert use? This insert uses the Tiger·tec Gold coating and the WSM33G coated carbide grade from Walter Tools, designed for enhanced wear resistance and edge stability in tough turning operations. How does the geometry influence machining? The 2E300L6‑CE4 geometry provides a robust edge and chipbreaker pattern that stabilises chip formation, reducing the likelihood of build‑up and supporting consistent surface finish during extended cuts. Is this insert suitable for serial production environments? Yes. The combination of coating, grade and geometry is intended to increase process reliability and reduce tool change frequency, making it well suited to serial production of components in stainless and high‑temperature alloys. Can the insert improve surface finish on difficult alloys? By maintaining a stable cutting edge and better chip evacuation, this insert helps achieve more consistent surface quality when machining stainless steels and heat‑resistant superalloys. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Brand names and trademarks are the property of their respective owners. They are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark holders. The offered item is an original, factory‑new product of the named manufacturer.
GX34-2E300L6-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WSM33G grade for secure chip control and extended tool life; ideal for machining stainless steels and heat‑resistant superalloys. Order the GX34-2E300L6-CF5 WSM33G indexable turning inserts directly via Metav Werkzeuge or contact our consultants for application advice. GX34-2E300L6-CF5 WSM33G indexable turning insert by Walter Tools — Tiger·tec Gold coating, chipbreaker 2E300L6-CF5 GX34-2E300L6-CF5 WSM33G is an indexable turning insert designed for high‑duty machining of stainless steels and heat‑resistant superalloys, offering a balance of thermal resistance and cutting‑edge stability Tiger·tec Gold coating for thermal stability WSM33G grade for difficult materials 2E300L6-CF5 chipbreaker for secure chips Stable cutting edge for consistent finishes Reliable performance in demanding materials The insert’s combination of the WSM33G carbide grade and Tiger·tec Gold coating delivers reliable performance when machining materials that generate heat and tend to form built‑up edge, such as stainless steel and nickel‑based alloys. The coated carbide substrate enhances thermal resistance and reduces flank wear, which translates into longer intervals between indexings and fewer tool changes. For production environments where component consistency matters, this configuration supports predictable tool life and a steady process window. Consistent edge life and improved surface quality Geometry and chip control are critical for repeatable surface finishes; the 2E300L6-CF5 chipbreaker is tuned to produce short, controllable chips under typical turning parameters. The insert geometry promotes a stable cutting edge and mitigates adhesion that commonly affects stainless steels, reducing the risk of built‑up edge and improving part quality. When paired with appropriate feeds and speeds, this indexable insert contributes to lower rework rates and a higher first‑pass yield on turned components. Productivity and economic advantages for shop floors Using a coated insert with a robust grade such as WSM33G can improve throughput by enabling higher cutting speeds and longer cutting intervals compared with uncoated grades. The result is enhanced productivity and better cost per part in batch and continuous production. For jobs involving mixed workpiece materials within the S and M ISO groups, this insert offers flexibility and reduces the need for frequent tool changes. For precise recommendations on cutting data for specific alloys or machines, technical consultation is available. Contact Metav Werkzeuge to discuss suitability, cutting data and to secure GX34-2E300L6-CF5 WSM33G Walter Tools inserts for machining stainless steels and superalloys Technical data SKU: GX34-2E300L6-CF5-WSM33G-WALTER Label: Drehwendeschneidplatte GX34-2E300L6-CF5 WSM33G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM33G Facts Material groups: S / M Suitable for stainless steel: yes Special features Chipbreaker: 2E300L6-CF5 Coating technology: Tiger·tec Gold (coated carbide) Application: machining of stainless steels and heat‑resistant superalloys Benefit: optimised chip control and edge stability FAQ What materials are best suited for this insert? The GX34-2E300L6-CF5 WSM33G insert is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal resistance and stable cutting behaviour for these challenging materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WSM33G grade increases thermal resistance and wear protection, enabling higher cutting speeds and improved edge life when using the GX34-2E300L6-CF5 insert in demanding turning operations. What role does the 2E300L6-CF5 chipbreaker play? The 2E300L6-CF5 chipbreaker is engineered to produce short, controllable chips and to support a stable cutting edge, which helps maintain surface quality and reduces the risk of built‑up edge during stainless steel turning. Can this insert be used for high‑speed cutting? The combination of WSM33G grade and Tiger·tec Gold coating supports elevated cutting speeds compared with uncoated grades; however, optimal parameters depend on workpiece alloy and machine rigidity—consult cutting data for specific applications. Is the insert suitable for finishing operations? Yes, the stable edge and tuned chip control of the GX34-2E300L6-CF5 WSM33G contribute to consistent surface finishes in semi‑finishing and finishing turns on suitable materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original factory‑new goods from the manufacturer Walter Tools.
GX34-2E300N03-CE4 WKP23G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and broad material capability for smoother production cycles and fewer tool changes; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. GX34-2E300N03-CE4 WKP23G indexable turning insert, Tiger‑tec Gold, for steel and cast iron – Walter Tools The GX34-2E300N03-CE4 WKP23G is a coated carbide indexable turning insert from the Tiger‑tec Gold series, designed for productive machining of steel and cast iron with optimised chip control and stable cutting edges Tiger‑tec Gold coating for extended tool life WKP23G grade for steel and cast iron machining Optimised chipbreaker for reliable chip control Consistent cutting-edge stability for productivity Longer tool life from a proven coating technology The integration of Tiger‑tec Gold technology gives this insert a coated carbide finishing that reduces abrasive and adhesive wear under typical turning conditions. That coating combination is formulated to maintain cutting-edge integrity over longer tool cycles, which translates into fewer indexings and less downtime. For workshops aiming to raise effective machining hours per tool, the insert’s wear resistance contributes directly to predictable tool change intervals and more stable process windows. Predictable chip control for quieter, safer turning The 2E300N03-CE4 chipbreaker geometry is developed to manage the chip forms typical of steel and cast iron, reducing the risk of tangled or long stringy chips. Controlled chip formation improves surface finish consistency and lowers the likelihood of secondary operations caused by poor chip evacuation. The geometry supports steady feed conditions and helps maintain machine uptime by simplifying swarf handling and reducing operator intervention. Versatile grade engineered for P and K materials The WKP23G grade is a Walter Tools development optimised for ISO P (steel) and ISO K (cast iron) groups. As a coated carbide class, the grade balances toughness and hardness to cope with the heat and abrasion encountered when machining unalloyed and alloyed steels as well as abrasive cast materials. For production environments handling a mix of components, this versatility reduces the need to stock multiple specialised grades, supporting leaner tool inventories. Stable edge geometry that supports productivity and surface quality Consistency of the cutting edge and the insert geometry helps to deliver repeatable dimensional results and steady surface quality even across longer runs. The controlled edge stability reduces microchipping and helps maintain the required tolerances without frequent adjustments. That reliability supports process planning: fewer unexpected interruptions, a better cost-per-component ratio and improved throughput on high-volume turning operations. For application advice on Walter Tools Tiger‑tec Gold inserts and availability of the GX34-2E300N03-CE4 WKP23G, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and supply options Technical Data Article number: GX34-2E300N03-CE4-WKP23G-WALTER Designation: GX34-2E300N03-CE4 WKP23G Product type: Drehwendeschneidplatte (indexable turning insert) Facts Series: Tiger‑tec Gold Grade: WKP23G Material groups: P (steel), K (cast iron) Special features Chipbreaker: 2E300N03-CE4 Material class: coated carbide Manufacturer: Walter Tools Suitable for steel machining: yes Suitable for cast iron machining: yes FAQ Which materials is this insert intended for? The GX34-2E300N03-CE4 WKP23G insert is intended for machining steel (ISO P) and cast iron (ISO K), reflecting the WKP23G grade’s balanced performance across those material groups. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WKP23G grade increases wear resistance and thermal stability, helping the Walter Tools insert to sustain cutting performance and reduce the frequency of indexing. How does the 2E300N03-CE4 chipbreaker affect machining? The 2E300N03-CE4 chipbreaker is designed for predictable chip formation in steel and cast iron, improving chip evacuation and supporting consistent surface quality during turning operations. Is this insert suitable for stainless steel applications? No specific suitability for stainless steel is indicated for the GX34-2E300N03-CE4 WKP23G; the grade and geometry are tuned for ISO P and K materials, so a stainless‑steel specific grade should be selected where required. How is the insert identified for ordering or stock purposes? Refer to the full designation or SKU when ordering: GX34-2E300N03-CE4 WKP23G (SKU GX34-2E300N03-CE4-WKP23G-WALTER) to ensure the correct Tiger‑tec Gold grade and chipbreaker geometry are supplied. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The article offered is original, factory‑new merchandise of the manufacturer.
GX34-2E300N03-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Taking advantage of the coated Tiger‑tec Gold grade and the optimised 2E300N03‑CE4 chipformer delivers stable cutting edges and reliable chip control in demanding turning operations; this combination supports productive machining of stainless steel and heat‑resistant superalloys. Order the GX34‑2E300N03‑CE4 WSM33G directly via Metav Werkzeuge or ask our consultants if needed. GX34-2E300N03-CE4 WSM33G indexable turning insert – Tiger‑tec Gold, chipformer 2E300N03-CE4 (Walter Tools) The GX34‑2E300N03‑CE4 WSM33G is an indexable turning insert engineered for heavy and heat‑generating materials, offering coated cemented‑carbide performance for stainless steels and superalloys. Tiger‑tec Gold coating for thermal stability Optimised chipformer 2E300N03-CE4 Suitable for stainless steel and superalloys Coated carbide grade WSM33G for long tool life Increased process reliability through coating technology and grade The combination of the Tiger‑tec Gold coating and the WSM33G cemented‑carbide grade provides enhanced resistance to thermal loads and wear, which is particularly important when machining materials that generate heat and strain the cutting edge. This technological pairing supports a stable cutting edge and reduces the risk of workpiece build‑up, improving overall process reliability. For production environments where downtime and rework are costly, the improved durability translates directly into fewer tool changes and steadier machining cycles. Better chip control and consistent surface quality from geometry The 2E300N03‑CE4 chipformer geometry is designed to optimise chip segmentation and evacuation in long‑chip‑producing materials. Effective chip control lowers the likelihood of surface damage and reduces handling interruptions during turning operations, resulting in a more consistent finish on components made from stainless steel or heat‑resistant alloys. Clear chip flow also lessens the thermal and mechanical load on the insert, helping to maintain dimensional accuracy and repeatability across batches. Practical benefits for workshop productivity and predictable tool life As a coated insert in the Tiger‑tec Gold series, this grade is aimed at demanding turning tasks where stable edge life and broad material capability are required. The grade's suitability for the ISO groups S and M indicates its focus on heat‑resistant superalloys and stainless steels, so selection is simplified when planning mixed‑material production. With predictable wear behaviour and robust edge stability, the insert supports continuous machining and easier process parameter standardisation, which contributes to improved throughput and lower overall machining costs per part. For specification advice or to secure immediate supply of Walter Tools indexable turning inserts with Tiger‑tec Gold performance, contact Metav Werkzeuge for expert guidance and fast delivery Technical data Article number: GX34-2E300N03-CE4-WSM33G-WALTER SKU: GX34-2E300N03-CE4-WSM33G-WALTER Designation: GX34-2E300N03-CE4 WSM33G Series: Tiger‑tec Gold Grade: WSM33G Chipformer: 2E300N03-CE4 Material groups: S / M Manufacturer: Walter Tools UID: GX34-2E300N03-CE4-WSM33G-WALTER Facts Material groups: S / M Coating technology: Tiger‑tec Gold Grade designation: WSM33G Chipformer code: 2E300N03-CE4 Special features Coated cemented carbide (Tiger‑tec Gold) Optimised chip control geometry Suited for stainless steel machining Suitable for heat‑resistant superalloys and titanium alloys Engineered for stable cutting edge and thermal resistance FAQ What materials is this insert best suited for? The GX34‑2E300N03‑CE4 WSM33G is specifically developed for stainless steel and heat‑resistant superalloys (ISO groups S and M), offering thermal resistance and stable edge behaviour for such materials. How does the chipformer 2E300N03‑CE4 affect machining? The 2E300N03‑CE4 chipformer promotes controlled chip segmentation and evacuation, which improves surface finish consistency and reduces interruptions during turning operations with long‑chip materials. Is the grade WSM33G a coated carbide? Yes, WSM33G is a coated cemented‑carbide grade within the Tiger‑tec Gold family, optimised for wear resistance and thermal stability in demanding turning applications. Can this insert be used for high‑temperature alloy turning? The insert is designed with heat resistance in mind and is suitable for many high‑temperature alloys; for specific superalloy grades and cutting parameters, consult Metav Werkzeuge for tailored recommendations. Does the insert support stable tool life in production runs? The combination of Tiger‑tec Gold coating and the WSM33G grade provides predictable wear behaviour and stable cutting edges, which helps to maintain consistent tool life across production batches. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
GX34-2E300N03-CE4 WSM33S WSM33S Wendeplatten - Walter Tools
High-temperature resistance and precise chip control combine to deliver consistent tool life and higher productivity when machining stainless steels and heat‑resistant superalloys; order via Metav Werkzeuge or consult our advisors for application support. Indexable turning insert GX34-2E300N03-CE4 WSM33S – Tiger·tec Silver for stainless steel and superalloys | Walter Tools GX34-2E300N03-CE4 WSM33S is a coated indexable turning insert engineered for productive turning of rostfreier Stahl and heat‑resistant superalloys, offering stable cutting edges and controlled chip formation for demanding operations. Tiger·tec Silver coating for heat resistance WSM33S grade for rostfreier Stahl and superalloys Stable chip formation and reliable edge life Consistent edge life for demanding materials The WSM33S grade, part of the Tiger·tec Silver family, is formulated to resist thermal load and edge degradation when machining stainless steel and high‑temperature alloys. The combination of a coated cemented‑carbide substrate and an optimised microgeometry supports stable chip formation, reducing the risk of built‑up edge and unexpected tool failures. This results in longer effective tool life and fewer intervention cycles on the machine, which contributes directly to improved throughput and a more predictable production rhythm. Controlled chips and reliable performance on the lathe The insert’s chipbreaker 2E300N03-CE4 is designed to produce short, controllable chips under the cutting conditions typical for group M and S materials. Effective chip control reduces machine interruptions and improves surface finish by preventing long, entangling chips and minimising chatter. The geometry promotes repeatable cutting behaviour, making the component an efficient choice for both stable roughing and tough finishing tasks. Where process reliability matters, this geometry supports consistent cycle times and reduces rework. Practical application and selection guidance This indexable insert is particularly suited to applications involving rostfreier Stahl and heat‑resistant superalloys such as Inconel or titanium alloys, where heat resistance and edge stability are critical. Selection of cutting parameters should follow material‑specific guidance: moderate cutting speeds with steady feed rates and appropriate coolant strategies will prolong edge life and preserve surface quality. For specialised setups or transition conditions between roughing and finishing, technical consultation can provide optimised parameter windows and holder recommendations to achieve the best balance between removal rate and tool longevity. For high‑heat turning and robust chip control, specify the Walter Tools Tiger·tec Silver insert via Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice Technical data SKU: GX34-2E300N03-CE4-WSM33S-WALTER Label: Drehwendeschneidplatte GX34-2E300N03-CE4 WSM33S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Core technical data Grade: WSM33S Series: Tiger·tec Silver Material class: S / M ISO designation: GX34-2E300N03-CE4 WSM33S Special features Chipbreaker: 2E300N03-CE4 Suitable for: stainless steel (ISO group M) and heat‑resistant superalloys / titanium (ISO group S) Coated cemented carbide grade optimised for thermal stability FAQ What materials is this insert designed to machine? The GX34-2E300N03-CE4 WSM33S indexable turning insert from Walter Tools is designed for rostfreier Stahl (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and reliable edge behaviour. What does the WSM33S grade provide compared with standard grades? WSM33S, as used in the Tiger·tec Silver series, provides enhanced heat resistance and improved edge stability, extending effective tool life when machining tough, heat‑generating materials. How does the chipbreaker 2E300N03-CE4 affect machining? The 2E300N03-CE4 chipbreaker gives short, controlled chips under typical turning conditions for M and S materials, improving surface finish and reducing interruptions due to chip build‑up. Is this insert suitable for finishing as well as roughing? Yes — with appropriate parameter selection and tooling setup, the insert supports both productive roughing and consistent finishing operations on rostfreier Stahl and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision cutting tools and is part of the Swedish Sandvik Group. Protected trademarks and product names are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered article is original, factory‑new goods of the manufacturer.
GX34-2E300N03-CE4 WSM43G WSM43G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM43G grade: durable wear resistance and stable chip control for machining stainless steels and superalloys — order the insert directly via Metav Werkzeuge or request application advice from our consultants. GX34-2E300N03-CE4 WSM43G Drehwendeschneidplatte — Tiger·tec Gold coating; for stainless steels & superalloys — Walter Tools A GX34-2E300N03-CE4 WSM43G indexable turning insert engineered for secure chip formation and enhanced cutting-edge stability when machining rostfreier Stahl and heat-resistant alloys in demanding production environments Tiger·tec Gold coating for extended tool life Designed for stainless steels and heat-resistant alloys Stable cutting edge for secure chip control Walter Tools quality for consistent performance Consistent machining of tough alloys with lower tooling costs The Tiger·tec Gold coating combined with the WSM43G grade provides a coated carbide solution designed specifically for challenging materials. This combination improves thermal resistance and reduces flank and crater wear, which translates into fewer tool changes and more consistent cycle times. For industrial turning operations where workpiece materials are prone to built-up edge and high cutting temperatures, the result is a measurable improvement in operational efficiency and predictable tool life. Secure chip control and reliable surface results The integrated chipbreaker geometry 2E300N03-CE4 is developed to enhance chip control, reducing the risk of long, entangling chips and improving process stability. As a consequence, machining interruptions caused by poor chip evacuation are minimised and surface finishes become more reproducible. In practice this means shorter set-up times and fewer interruptions on lathes running rostfreier Stahl or high-temperature alloys, so production throughput is maintained at a steady, reliable pace. Practical advantages for workshop handling and tool management As an indexable insert with the ISO designation GX34-2E300N03-CE4 WSM43G, the component simplifies inventory and replacement workflows while delivering the cutting edge stability expected from Walter Tools. The grade is tailored to support secure chip formation and wear resistance when tackling stainless steels and superalloys, making it suitable for both roughing passes where edge robustness is crucial and for controlled finishing where surface integrity matters. For customers seeking reproducible results and lower rework rates, this insert offers a robust technical foundation. For reliable results with Tiger·tec Gold and the WSM43G grade, contact Metav Werkzeuge for availability and tailored machining advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GX34-2E300N03-CE4-WSM43G-WALTER Label: Drehwendeschneidplatte GX34-2E300N03-CE4 WSM43G Walter Tools ISO designation: GX34-2E300N03-CE4 WSM43G Facts Material classification: S / M Suitable for: stainless steels (M), superalloys and titanium (S) Special features Coating: Tiger·tec Gold Chipbreaker: 2E300N03-CE4 Grade: WSM43G (coated carbide) Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The GX34-2E300N03-CE4 WSM43G insert from Walter Tools is specified for stainless steels (M) and for heat-resistant superalloys and titanium (S), offering tailored performance for those groups. How does the Tiger·tec Gold coating help during machining? The Tiger·tec Gold coating on the WSM43G grade increases thermal resistance and reduces wear, which improves tool life and process stability when machining demanding materials. What is the function of the 2E300N03-CE4 chipbreaker? The 2E300N03-CE4 chipbreaker geometry supports effective chip control, reducing entanglement and interruptions during turning operations with rostfreier Stahl and superalloys. Is this an indexable insert and how is it identified? Yes — the component is an indexable turning insert identified as GX34-2E300N03-CE4 WSM43G, designed for straightforward replacement and consistent edge performance. Can this insert be used for finishing as well as roughing? The WSM43G grade and the Tiger·tec Gold coating provide a balance of wear resistance and edge stability that is suitable for robust roughing and controlled finishing passes on suitable materials. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX34-2E300N03-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of a heat-resistant, coated carbide grade that promotes stable chip formation and reliable cutting-edge performance in demanding turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. GX34-2E300N03-CF5 WSM33G indexable turning insert — Tiger·tec Gold for stainless steels and superalloys | Walter Tools GX34-2E300N03-CF5 WSM33G is an indexable insert designed for heavy-duty turning of hard-to-machine materials and stainless steels Tiger·tec Gold coated carbide technology Optimised for stainless steels and superalloys Robust grade WSM33G for heat resistance Chipbreaker 2E300N03-CF5 for stable chips Greater productivity on difficult materials The combination of Tiger·tec Gold coating and the WSM33G grade creates a cutting solution optimised for materials that generate high heat and tend to work-harden, such as stainless steels and heat-resistant superalloys. The coating provides thermal protection while the substrate maintains edge stability, which together reduce the tendency for built-up edge and support consistent surface finish. For production environments this means fewer interrupted cycles due to edge failure and a measurable increase in machine uptime. Longer tool life and reproducible results A heat-resistant, coated carbide formulation offers improved wear resistance under elevated temperatures. The result is a stable cutting edge that tolerates hard cutting conditions and extends tool life compared with uncoated grades. In practical terms, fewer index changes and predictable wear behaviour lower tooling overhead and simplify process planning. The insert’s engineered combination of coating and carbide base translates into reproducible component quality across batches — an important factor when repeatability and cost-efficiency are priorities. Practical guidance for integration into turning operations The insert features the chipbreaker 2E300N03-CF5, which is tailored to promote controlled chip formation during tough turning tasks. When used in suitable toolholders for heavy roughing and semi-finishing, the geometry helps evacuate chips reliably and reduces thermal load on the cutting edge. Selection of appropriate cutting parameters and coolant strategy will further enhance performance; for machining stainless steels and nickel-based alloys, moderate cutting speeds with stable feed rates and positive chip control typically yield the best compromise between surface finish and tool life. The insert balances durability and process security for demanding workshop and production settings. For high-process security with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored application support and availability of GX34-2E300N03-CF5 WSM33G in stock Technical data SKU: GX34-2E300N03-CF5-WSM33G-WALTER Article designation: GX34-2E300N03-CF5 WSM33G Product type: Indexable turning insert Manufacturer: Walter Tools Core data Grade: WSM33G Series: Tiger·tec Gold Chipbreaker: 2E300N03-CF5 Material group: S / M Special features Coating: Tiger·tec Gold (coated carbide) Suitable for: stainless steels; heat-resistant superalloys and titanium Benefit: stable chip formation and heat resistance Intended application: heavy-duty turning and difficult-to-machine materials FAQ What materials is this insert suitable for? The GX34-2E300N03-CF5 WSM33G is specified for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S), offering secure chip formation and thermal stability. Which series and grade does this insert belong to? This indexable turning insert is part of the Tiger·tec Gold series and uses the WSM33G coated carbide grade for improved wear resistance. What advantage does the chipbreaker 2E300N03-CF5 provide? The chipbreaker 2E300N03-CF5 promotes controlled chip formation in heavy turning, helping to evacuate chips and reduce heat transfer to the cutting edge for more reliable cycles. Is the insert suitable for roughing and semi-finishing operations? Yes, the insert’s combination of geometry and WSM33G grade supports heavy roughing and semi-finishing in difficult-to-machine materials while maintaining a stable cutting edge. How does the coating affect tool life? The Tiger·tec Gold coating offers thermal protection and improved wear resistance, which together contribute to longer tool life and more consistent component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are cited for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
GX34-2E300N03-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the WSM33S grade and the Tiger‑tec Silver coating for dependable machining of stainless steels and heat‑resistant superalloys; this combination ensures stable chip formation and consistent cutting‑edge performance. Order the insert directly via Metav Werkzeuge or request application advice from the technical team. GX34-2E300N03-CF5 WSM33S Turning insert, Tiger‑tec Silver — for stainless steel & superalloys | Walter Tools A GX34-2E300N03-CF5 WSM33S indexable turning insert engineered for secure chip control and edge stability when machining corrosive and heat‑resistant alloys. Tiger‑tec Silver coating for enhanced wear resistance WSM33S grade for machining stainless steel (M) Optimised for heat‑resistant superalloys and titanium (S) Stable edge geometry with effective chip control Consistent performance where material demands are highest The WSM33S grade is a coated carbide designed to cope with the thermal and mechanical challenges of machining stainless steels and superalloys. Its formulation supports secure chip formation, reducing the tendency for build‑up on the cutting edge and improving dimensional stability in production runs. For machine shops processing corrosive or heat‑resistant materials, this results in fewer interruptions and more predictable tool life, which in turn supports higher throughput and reduced scrap rates. Coating technology that prolongs cutting life The Tiger‑tec Silver technology provides a multi‑layered coating system that balances wear resistance and thermal protection. This engineering reduces flank and crater wear under challenging cutting conditions, helping to maintain a stable cutting edge over extended cycles. The combination of coated carbide and advanced surface treatment enables reliable performance in intermittent and continuous turning operations, supporting consistent surface finishes and repeatable productivity. Improved process security through chip management The integrated chipbreaker (2E300N03‑CF5) is tailored to provide effective chip control across the ISO groups M and S. Controlled chips lower the risk of rework and machine stoppages while enhancing operator safety and post‑process handling. The insert’s geometry promotes predictable chip curl and evacuation, which benefits automated production cells and manual turning alike by reducing the need for frequent intervention. Practical advantages for production environments As an indexable solution from Walter Tools, the insert supports cost‑efficient machining by combining wear resistance with edge robustness. The product is suitable for serial and batch manufacturing where reliability and repeatable results are critical. Engineers and shop managers will value the balance of process security and adaptability to demanding materials, enabling tighter tolerances and consistent component quality without excessive tool changeovers. For tailored application guidance and to source Walter Tools Tiger‑tec Silver turning inserts, contact Metav Werkzeuge for technical consultation and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: GX34-2E300N03-CF5-WSM33S-WALTER Product type: Turning insert (indexable) Grade: WSM33S Facts ISO material groups: M, S Chipbreaker: 2E300N03-CF5 Series: Tiger‑tec Silver Special features Coated carbide Suitable for stainless steels and heat‑resistant superalloys Stable cutting edge and optimised chip control Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The GX34-2E300N03-CF5 WSM33S insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the grade’s focus on thermal and edge stability. How does the Tiger‑tec Silver coating benefit machining? Tiger‑tec Silver enhances surface wear resistance and thermal protection on the insert, which helps to maintain a stable cutting edge and extends usable tool life in demanding turning operations. What role does the chipbreaker play in performance? The 2E300N03‑CF5 chipbreaker is designed to produce controlled chips for machining M and S materials, improving evacuation, reducing rework, and increasing process security during serial production. Is this insert suitable for automated production cells? Yes; the combination of chip control and edge stability makes the insert appropriate for both automated and manual machining environments where consistent chip behaviour and reduced intervention are needed. Can the insert deliver repeatable surface finishes? The grade and coating combination supports consistent cutting performance, which contributes to repeatable surface quality and dimensional stability across production batches. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX34-2E300N03-CF5 WSM43G WSM43G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WSM43G grade for enhanced wear resistance and reliable chip control when machining stainless steels and heat‑resistant superalloys; order the GX34-2E300N03-CF5 WSM43G turning insert directly via Metav Werkzeuge or request advice from the consultancy team if application assistance is required. GX34-2E300N03-CF5 WSM43G Turning Insert – Tiger·tec Gold for Stainless Steels & Superalloys | Walter Tools GX34-2E300N03-CF5 WSM43G is a coated carbide turning insert engineered for heavy-duty turning in stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering a combination of edge stability and secure chip formation. Tiger·tec Gold coating for extended tool life WSM43G grade for stainless steels and superalloys Stable cutting edge for heavy‑duty turning Designed for secure chip formation Longer tool life for demanding materials The combination of the Tiger·tec Gold coating and the WSM43G carbide grade delivers measurable benefits when tackling difficult‑to‑cut materials. As a coated carbide solution, the insert reduces wear and supports a consistent cutting edge under elevated temperatures and heavy mechanical load. This means fewer tool changes, less unplanned downtime and a more stable machining rhythm in production environments. The construction focuses on thermal and mechanical resistance, translating into a predictable service life and steady performance in series turning operations. Reliable chip control and reduced process risk Equipped with the 2E300N03‑CF5 chipbreaker, the insert promotes secure chip formation and controlled evacuation during turning, which lowers the risk of built‑up edge and interrupted cuts. Stable chip control protects the cutting edge and workpiece surface, thereby reducing rework and improving first‑pass yield. For production lines where consistent throughput and minimal stoppages are priorities, the insert’s geometry and grade work together to enhance process reliability and machining repeatability. Optimised for stainless steels and heat‑resistant alloys Engineered for the ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), this turning insert addresses common challenges such as material toughness, heat generation and poor thermal conductivity. The grade and coating combination supports steady cutting forces and guard against edge degradation, resulting in better surface finish and steadier dimensional accuracy. For components that demand repeatable quality from batch to batch, the insert is a practical choice to maintain productivity while handling complex alloys. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools Tiger·tec Gold inserts such as the GX34-2E300N03-CF5 WSM43G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX34-2E300N03-CF5-WSM43G-WALTER Designation: GX34-2E300N03-CF5 WSM43G Type: Turning indexable insert Manufacturer: Walter Tools Grade / series: WSM43G / Tiger·tec Gold Chipbreaker: 2E300N03-CF5 Key figures ISO material groups: M, S Suitable materials: stainless steels; heat‑resistant superalloys/titanium Material specification: coated carbide (coated hardmetal) SKU: GX34-2E300N03-CF5-WSM43G-WALTER Special features Tiger·tec Gold coating technology Stable cutting edge for demanding machining Designed for secure chip formation Optimised for heavy‑duty turning of difficult materials FAQ Is the GX34-2E300N03-CF5 WSM43G suitable for machining stainless steel? Yes. The GX34-2E300N03-CF5 WSM43G turning insert is specifically developed for ISO group M materials and provides improved wear resistance and chip control when machining stainless steels. Can the insert be used on heat‑resistant superalloys or titanium? Yes. The WSM43G grade and Tiger·tec Gold coating on the GX34-2E300N03-CF5 insert are suitable for ISO group S materials such as superalloys and titanium, offering enhanced cutting edge stability under thermal stress. What advantage does the Tiger·tec Gold coating provide on this insert? The Tiger·tec Gold coating on the GX34-2E300N03-CF5 WSM43G insert increases surface hardness and wear resistance, contributing to longer tool life and more consistent performance in demanding turning operations. What chipbreaker is integrated and what is its benefit? The GX34-2E300N03-CF5 insert features the 2E300N03‑CF5 chipbreaker, which promotes secure chip formation and controlled evacuation to protect the cutting edge and improve process stability. For which applications is this turning insert recommended? The GX34-2E300N03-CF5 WSM43G is recommended for heavy‑duty turning applications involving stainless steels and heat‑resistant superalloys, where edge stability, wear resistance and reliable chip control are crucial. Manufacturer/Responsible: Walter Tools (Walter AG), part of the Sandvik group; AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX34-2E300N03-GD6 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WSM33G grade together with the 2E300N03‑GD6 geometry for controlled chip formation and extended tool life; order the insert directly via Metav Werkzeuge or request application support from our consultants. GX34-2E300N03-GD6 WSM33G indexable turning insert with Tiger·tec Gold coating – Walter Tools The GX34-2E300N03-GD6 WSM33G is an indexable turning insert engineered for heavy-duty machining, optimised for rostfreier Stahl and heat‑resistant superalloys, offering stable cutting edges and reliable chip control. Tiger·tec Gold coating for edge stability Optimised chip control for difficult materials Suitable for rostfreier Stahl and superalloys High wear resistance for prolonged tool life Reliable performance in rostfreier Stahl and superalloys The WSM33G cutting grade, part of the Tiger·tec Gold series, is formulated for demanding applications in rostfreier Stahl and heat‑resistant alloys. Its combination of a coated carbide substrate and tailored microstructure promotes stable chip formation and reduces the tendency for build‑up on the cutting edge. In practice this means fewer interruptions for regrinding or insert changes, improved process repeatability and a more consistent surface finish when turning tough, adhesive materials. Optimised geometry for secure chip control and productivity The 2E300N03‑GD6 geometry provides a balanced approach between cutting strength and chip guidance. The geometry supports predictable breakage of chips and minimises uncontrolled flows of swarf, which in turn enhances productivity and reduces machine downtime. For production environments that require steady cycle times and reliable surface quality, this insert geometry helps maintain machining parameters over longer tool life windows. Reduced interventions and predictable tool life for production A coated grade such as WSM33G offers wear resistance that translates into longer tool life under high thermal and mechanical loads. The design intent is a stable cutting edge with good resistance to flank wear and crater formation, which supports higher metal removal rates in many industrial turning tasks. Combined with Walter Tools’ emphasis on process stability, the insert contributes to measurable improvements in shop‑floor efficiency and reproducible component quality. Contact Metav Werkzeuge for tailored application advice and to order the GX34-2E300N03-GD6 WSM33G insert with Tiger·tec Gold coating; our technical consultants are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: GX34-2E300N03-GD6-WSM33G-WALTER Product type: indexable turning insert Grade: WSM33G Series: Tiger·tec Gold Designation: GX34-2E300N03-GD6 WSM33G Facts ISO material groups: S / M Geometry designation: 2E300N03-GD6 Special features Coated carbide grade WSM33G (Tiger·tec Gold) Application: heavy‑duty machining of rostfreier Stahl and heat‑resistant superalloys Stable chip formation and edge stability Walter Tools brand FAQ Which materials is the insert suitable for? The GX34-2E300N03-GD6 WSM33G insert is intended for machining rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S). What does the Tiger·tec Gold coating deliver? The Tiger·tec Gold coating on the WSM33G grade enhances thermal resistance and edge robustness, improving wear resistance and process stability in demanding turning operations. How does the 2E300N03‑GD6 geometry affect machining? The 2E300N03‑GD6 geometry supports consistent chip breaking and controlled swarf evacuation, which helps maintain surface quality and reduces unexpected stoppages. Is this insert suitable for continuous production environments? Yes, the combination of grade and geometry is designed to reduce tool interventions and provide predictable tool life, making it suitable for series production where repeatability is essential. Can the insert handle high cutting speeds? The WSM33G grade and Tiger·tec Gold technology are engineered to resist thermal loads typically encountered at elevated cutting speeds, contributing to sustained performance under challenging conditions. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX34-2E300R6-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM33G grade for longer tool life and consistent edge stability when machining demanding materials; order directly via Metav Werkzeuge or contact the consultancy team for tailored application advice. GX34-2E300R6-CF5 WSM33G indexable turning insert by Walter Tools — Tiger·tec Gold coated for rostfreier Stahl and superalloys GX34-2E300R6-CF5 WSM33G is an indexable turning insert designed for high-stress applications such as rostfreier Stahl and heat-resistant superalloys, offering a robust combination of edge stability and chip control Tiger-tec Gold coating for long tool life WSM33G grade for high edge stability Optimised chip control for difficult alloys Suitable for rostfreier Stahl and superalloys High-performance coating for extended productivity The combination of the Tiger·tec Gold coating and the WSM33G carbide grade is engineered for demanding turning tasks. The coating improves thermal resistance and wear behaviour so that the cutting edge remains intact longer under elevated temperatures. This means fewer insert changes and a steadier production rhythm. For shops working with tough materials, the result is measurable: longer uninterrupted machining cycles and reduced tool consumption thanks to improved wear resistance and maintained dimensional accuracy. Precise chip control and stable cutting edge The integrated chipbreaker 2E300R6-CF5 is optimised to control chip form and evacuation when machining sticky or work-hardening materials. Controlled chip formation reduces the risk of built-up edge and stabilises cutting forces, which in turn preserves the edge stability and surface finish. The insert geometry supports consistent cutting behaviour across varying depths of cut, making it suitable for series production where process reliability and repeatability are priorities. Designed for demanding materials and consistent results This insert is intended for applications in the ISO groups M and S, addressing rostfreier Stahl and heat-resistant superalloys. The coated carbide concept combines fracture resistance with thermal stability, enabling productive metal removal rates while maintaining surface quality. Process planners will find the insert delivers predictable tool life and steady performance, supporting cost-effective machining strategies and improved first-pass yields. Application notes and compatibility Selection of the correct insert geometry and cutting data remains essential for optimal results. The geometry identified by GX34-2E300R6-CF5 with the WSM33G grade performs particularly well where stable cutting edges and thermal resilience are required. For operations involving interrupted cuts or heavy feeds, the enhanced toughness and coating behaviour reduce the incidence of premature edge failure. For further adaptation to specific machines or workpiece conditions, technical consultation is available to match feed, speed and depth of cut to the insert’s capabilities. Contact Metav Werkzeuge for availability, batch sizes and advice on integrating Walter Tools Tiger·tec Gold inserts into current machining processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GX34-2E300R6-CF5-WSM33G-WALTER Article name: GX34-2E300R6-CF5 WSM33G Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM33G Chipbreaker: 2E300R6-CF5 Material groups: S / M UID: GX34-2E300R6-CF5-WSM33G-WALTER Facts Applicable ISO groups: M (rostfreier Stahl), S (superalloys / titanium) Coating technology: Tiger·tec Gold Grade classification: coated carbide (WSM33G) Special features Coated carbide grade for thermal and wear resistance Optimised chipbreaker 2E300R6-CF5 for stable chip control Suited for rostfreier Stahl and heat-resistant superalloys Engineered for edge stability and productive machining FAQ Which materials are recommended for this insert? The GX34-2E300R6-CF5 WSM33G insert is specified for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where thermal resistance and edge stability are required. What advantages does the Tiger·tec Gold technology provide? Tiger·tec Gold enhances thermal stability and wear resistance, extending tool life and supporting consistent cutting performance under elevated temperatures with the WSM33G grade. How does the chipbreaker 2E300R6-CF5 affect machining? The 2E300R6-CF5 chipbreaker is tuned to produce short, controllable chips in difficult alloys, improving evacuation and reducing the risk of built-up edge for more reliable surface finish. Is this insert suitable for interrupted cuts or heavy feed rates? Yes, the combination of the WSM33G grade and the insert geometry offers increased toughness and edge support, making it appropriate for interrupted cuts and heavier machining regimes when set up correctly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; info@walter-tools.com Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the stated manufacturer.
GX34-3E400N04-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WSM33G grade for extended tool life and consistent chip control; the robust geometry delivers stable cutting edges and reliable performance in demanding stainless steel and superalloy turning. Order the GX34‑3E400N04‑CF5 WSM33G insert via Metav Werkzeuge or contact the sales team for cutting-parameter advice. GX34-3E400N04-CF5 WSM33G — Indexable turning insert (Tiger‑tec Gold) by Walter Tools The GX34-3E400N04-CF5 WSM33G is a coated carbide indexable turning insert designed for heavy-duty and high-temperature alloy machining, offering enhanced wear resistance and controlled chip formation. Tiger·tec Gold coating technology Optimised for stainless steel (M) and superalloys (S) Stable cutting edge for heavy-duty turning Geometry 3E400N04-CF5 for improved chip control High performance for demanding materials The combination of Tiger‑tec Gold surface technology with the WSM33G coated carbide grade ensures increased thermal resistance and wear protection when machining tough materials. This insert supports secure and repeatable chip formation under elevated cutting temperatures, which is particularly valuable when facing the work-hardening tendencies of stainless steel or the low thermal conductivity of superalloys. By favouring a stable cutting edge and a hard-wearing coating, the insert contributes to longer tool life and reduced tool-change frequency, improving overall machining efficiency and cost-effectiveness in production environments. Geometry that stabilises cutting behaviour and surface finish The specified insert geometry 3E400N04-CF5 is designed to balance shear and compressive forces at the cutting zone. The shaped chipformer and edge preparation produce consistent chips and reduce the risk of built-up edge, which in turn supports a reliable surface finish. For operations where dimensional repeatability and surface integrity are critical, the geometry minimises vibration and fosters steady cutting conditions. This stability translates directly into predictable cycle times and fewer scrapped parts during serial turning. Practical advantages and recommended applications Suited to the material groups denoted by M (stainless steels) and S (heat-resistant superalloys and titanium), this indexable turning insert is intended for sectors requiring robust performance under thermal and mechanical stress. The coated carbide construction of the insert provides a practical compromise between hardness and toughness, allowing productive machining of corrosion-resistant alloys and high-temperature materials. In applications where stable chip control and edge security are priorities, the insert supports higher metal‑removal rates while maintaining surface standards. For process integration, the insert pairs well with stable toolholders and rigid setups to exploit its full potential. Contact Metav Werkzeuge for a machining consultation on the Tiger‑tec Gold GX34‑3E400N04‑CF5 WSM33G insert and tailored recommendations for cutting data and toolholder selection. Technical data SKU: GX34-3E400N04-CF5-WSM33G-WALTER Designation: GX34-3E400N04-CF5 WSM33G Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WSM33G Core characteristics Applicable material groups: M (stainless steel), S (superalloys/titanium) Geometry: 3E400N04-CF5 Coating/technology: Tiger·tec Gold Substrate: coated carbide Special features Coated carbide grade WSM33G Stable cutting edge for heavy-duty turning Optimised chipformer for secure chip control Intended for hard-to-machine materials and stainless steel Manufacturer: Walter Tools FAQ Is the GX34‑3E400N04‑CF5 WSM33G suitable for stainless steel machining? Yes. The GX34‑3E400N04‑CF5 WSM33G insert, with its Tiger‑tec Gold coating and WSM33G grade, is specifically optimised for machining stainless steel (ISO group M). Can this insert be used for superalloys and titanium alloys? The insert is intended for ISO group S materials; the WSM33G grade and coating give thermal stability and edge strength suitable for many superalloy and titanium applications. What benefits does the Tiger‑tec Gold technology provide? Tiger‑tec Gold enhances thermal resistance and wear protection, improving tool life and maintaining cutting-edge integrity during demanding operations with the GX34‑3E400N04‑CF5 geometry. How does the 3E400N04‑CF5 geometry affect machining? The 3E400N04‑CF5 geometry provides controlled chip formation and reduced tendency for built‑up edge, resulting in more consistent surface finishes and stable cutting conditions when using this insert. Is the insert compatible with standard indexable turning toolholders? The GX34‑3E400N04‑CF5 WSM33G is an indexable turning insert designed for common toolholder systems that accept this insert designation; select a rigid holder to maximise performance. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is a brand of Walter AG and part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are mentioned solely for explanation purposes; there is no affiliation between Metav Werkzeuge and the referenced brands. The offered item is original, factory-new goods of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com