GX24-3E6.30N WMG40 WMG40 Wendeplatten - Walter Tools
Take advantage of the combination of WMG40 coated carbide and the 3E6.30N chipbreaker to achieve stable cutting performance and improved productivity; order the insert directly via Metav Werkzeuge or consult the team for the product matrix and application advice. GX24-3E6.30N WMG40 – indexable turning insert with 3E6.30N chipbreaker by Walter Tools The GX24-3E6.30N WMG40 is a coated carbide indexable turning insert designed for versatile turning tasks; it delivers repeatable cutting performance in a wide range of industrial machining applications. Coated carbide grade WMG40 3E6.30N chipbreaker geometry Stable cutting edge for productive machining Application matrix should be consulted Consistent machining results through stable cutting geometry The combination of the WMG40 grade and the dedicated 3E6.30N chipbreaker provides a balance of wear resistance and predictable cutting behaviour. The coated carbide composition offers a surface treatment that increases resistance to abrasion and thermal impact, which in practice means longer intervals between index changes and fewer unscheduled stops. For engineers seeking to maintain cycle times and part tolerances, this insert supports consistent removal rates and helps to reduce variability in serial production. The term chipbreaker refers to the insert geometry designed to shape and evacuate chips, improving safety and machine cleanliness during turning. Better chip control for safer handling and improved surface finish A well-matched chipbreaker reduces long, stringy swarf and promotes short, manageable chip forms; the 3E6.30N geometry is optimised for such behaviour in a variety of turning operations. Improved chip control leads directly to fewer workpiece marks and more reliable tool contact, which in turn supports superior surface quality without extra finishing steps. Explaining the benefit plainly: when chips break predictably, machine downtime for clearing swarf falls and operator safety improves. Where specific material classes are in play, consult the product matrix to confirm the most favourable cutting parameters and expected surface outcomes. Application guidance and integration into production tooling This indexable insert is supplied as part of the Walter open series and is intended for use in standard toolholders compatible with the GX24 shape designation. The insert’s coated carbide construction supports a broad application scope, but final suitability depends on the workpiece material and cutting data; the product matrix should be checked to match machining conditions precisely. The practical advantage is straightforward: by selecting an insert with a stable cutting edge and proven chip control, process reliability increases and tool-change frequency decreases, delivering measurable gains in throughput and lower per-part machining costs. For complex or high-volume programmes, integration into existing tool systems is simplified when the insert geometry and grade are chosen according to the machining plan. For specific application advice or to request the material and cutting-parameter matrix for this Walter Tools insert, contact Metav Werkzeuge and secure the correct configuration for the machining task. Technical data Article number: GX24-3E6.30N-WMG40-WALTER Label: Drehwendeschneidplatte GX24-3E6.30N WMG40 Walter Tools Manufacturer: Walter Tools Core specifications Grade: WMG40 Chipbreaker: 3E6.30N Series: Walter Schneidstoffsorte - Serie offen Base designation: GX24-3E6.30N Special features Coated carbide (described as coated hard metal) Catalogue-dependent material information Designed for turning applications Recommended: consult product matrix for material suitability FAQ What materials is this insert suitable for? The insert’s WMG40 grade offers broad applicability, but the exact suitability depends on the workpiece material; consult the Walter Tools product matrix for definitive recommendations. How does the 3E6.30N chipbreaker affect machining? The 3E6.30N chipbreaker shapes chips into short, controllable forms, improving safety, reducing swarf management, and often enhancing surface finish under the correct cutting parameters. Can this insert be used in existing toolholders marked for GX24? Yes, the insert matches the GX24 designation and is intended for compatible indexable turning toolholders; verify seat and clamping compatibility before mounting. What is the main benefit of the WMG40 grade compared with general-purpose grades? The WMG40 coated carbide is formulated to combine wear resistance with a stable cutting edge, yielding longer tool life and more consistent machining results in suitable applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3F400N02EM-1 WBS10 WBS10 Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance, precise edge stability and Walter's CBN expertise for consistent productivity in hardened-material turning; order the insert via Metav Werkzeuge or consult the technical advisors for application-specific guidance. GX24-3F400N02EM-1 WBS10 indexable turning insert (CBN grade) — Walter Tools The GX24-3F400N02EM-1 WBS10 is an indexable insert engineered for precision turning of hardened and highly abrasive workpieces in demanding production environments CBN cutting material for hard materials Optimised for high wear resistance Walter CBN / Hartstoff series quality Repeatable edge stability for productivity Reduced machining costs through longer tool life The use of CBN cutting material in this insert delivers a substantially longer service life compared with conventional carbide grades when machining gehärteten Stahl and other high-wear alloys. The WBS10 grade is formulated to maintain a stable cutting edge under thermal and mechanical load, which reduces the frequency of insert changes and secondary operations. This translates into measurable savings on tool consumption, lower spindle idle time and improved overall equipment effectiveness. Greater process security and consistent surface quality Equipped with the chipbreaker 3F400N02EM-1, the geometry ensures controlled chip formation and evacuation even at the higher cutting speeds typical for CBN applications. Stable chip control minimises the risk of workpiece damage and supports reproducible surface finishes, so the production line benefits from fewer rejects and more predictable throughput. The insert’s design supports consistent results across batches, promoting reliable cycle times and enhanced process security. Practical selection and application guidance for workshop use The insert belongs to the Walter CBN / Hartstoff series and the WBS10 grade; it is intended primarily for challenging turning tasks on gehärteten Stahl and similar materials. Selection should follow the product matrix and machining parameters provided by Walter Tools or Metav Werkzeuge to match hardness, cutting speed and depth of cut. Where material variants such as cast components or superalloys are present, compatibility must be verified against the supplied matrix to ensure optimum performance. Productivity benefits from repeatability and edge stability Repeatable edge performance reduces set-up variation and supports unattended or lights-out machining strategies. The combination of WBS10 microstructure and a robust chipbreaker delivers steady cutting forces and predictable tool behaviour, which simplifies process tuning and shortens ramp-up time when introducing new batches or components. In automated production, this repeatability directly raises production yield and lowers per-part processing costs. Contact Metav Werkzeuge for tailored advice on Walter Tools CBN inserts and to arrange application-specific recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-3F400N02EM-1-WBS10-WALTER SKU: GX24-3F400N02EM-1-WBS10-WALTER Product designation: GX24-3F400N02EM-1 WBS10 Product type: Indexable turning insert Brand: Walter Tools Grade: WBS10 Series: Walter CBN / Hartstoff Facts Chipbreaker code: 3F400N02EM-1 Material family: CBN (cubic boron nitride) Intended for: hardened and high-wear materials SKU UID: GX24-3F400N02EM-1-WBS10-WALTER Special features CBN cutting material for high thermal and abrasive resistance Optimised chip formation and evacuation Designed for repeatable edge stability and productivity Application recommendation: consult product matrix for material compatibility FAQ What materials is this insert suited for? The GX24-3F400N02EM-1 WBS10 insert is designed predominantly for machining gehärteten Stahl and other high-wear alloys; confirm suitability against the Walter CBN / Hartstoff product matrix. How does the WBS10 grade improve tool life? The WBS10 CBN grade maintains a durable cutting edge under high temperatures and abrasive conditions, which extends tool life and reduces changeovers for Walter Tools indexable inserts. What is the role of the 3F400N02EM-1 chipbreaker? The 3F400N02EM-1 chipbreaker promotes controlled chip formation and reliable evacuation, supporting consistent surface quality and safer machining in demanding turning operations. Is this insert suitable for automated production? Yes, the repeatable edge stability and controlled chip behaviour of this insert make it well suited for automated and lights-out turning processes, provided cutting parameters follow Walter Tools recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3F400N02FS-F1 WDN10 Wendeplatten - Walter Tools
Take advantage of the high wear resistance of polycrystalline diamond and the optimised chipbreaker geometry to extend tool life and reduce downtime; order directly via Metav Werkzeuge or consult our specialists for material-specific advice GX24-3F400N02FS-F1 WDN10 – Turning indexable insert with PCD grade by Walter Tools A GX24-3F400N02FS-F1 WDN10 turning indexable insert engineered for precision turning of abrasive non-ferrous materials and demanding production environments PCD grade for high wear resistance Optimised for abrasive non-ferrous materials Walter WDN10 series with stable cutting edge Chipbreaker 3F400N02FS-F1 for reliable chip control Longer tool life through PCD material performance The use of polycrystalline diamond (PCD) in this insert provides outstanding wear resistance in abrasive, non-ferrous applications. PCD is a super-hard cutting material that maintains a sharp edge far longer than conventional carbide on materials such as non-ferrous alloys and other abrasive, non-iron components. This translates directly into fewer tool changes, reduced machine downtime and a steadier production flow. The combination of the PCD grade and a stable cutting geometry supports consistent part quality during extended production runs Better process reliability via defined chip control The integrated chipbreaker 3F400N02FS-F1 is designed to influence chip formation and evacuation, improving chip control and contributing to a superior surface finish. For operators who require predictable machining behaviour, an effective chipbreaker reduces the risk of built-up edge and unstable cutting, which in turn lowers scrap rates and secondary operations. The insert’s geometry is suitable for finishing and light roughing passes where repeatable chip formation is crucial for process security Application guidance and catalogue-dependent options Material and coating options are catalogue-dependent, so suitability must be checked against the manufacturer’s application matrix before final selection. The WDN10 grade is primarily intended for non-ferrous and abrasive non-ferrous substrates; compatibility with particular alloys or special materials should be verified to ensure optimal performance. For customised process settings or when machining mixed materials, referencing the product matrix and production data sheets will help select the correct variant and cutting parameters Contact Metav Werkzeuge for application recommendations on the Walter Tools GX24-3F400N02FS-F1 WDN10 insert or request a material-specific assessment via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: GX24-3F400N02FS-F1-WDN10-WALTER Designation: GX24-3F400N02FS-F1 WDN10 Product type: Turning indexable insert Manufacturer: Walter Tools Core measurements No numerical dimensions provided in the data Special features Grade: WDN10 (polycrystalline diamond PCD) Chipbreaker: 3F400N02FS-F1 Series: Walter Schneidstoffsorte – open series Material information: catalogue-dependent Intended application: non-ferrous and abrasive non-ferrous materials Insert designation (short): GX24-3F400N02FS-F1 FAQ What materials is this insert intended for? The GX24-3F400N02FS-F1 WDN10 insert is designed for non-ferrous and abrasive non-ferrous materials; check the product matrix for specific alloy suitability Is the insert suitable for high-volume production? Yes, the PCD-based WDN10 grade delivers extended tool life and consistent performance, making it well suited to high-volume production runs How does the chipbreaker affect machining? The 3F400N02FS-F1 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge Are coating and material options fixed for this insert? Material and coating options are catalogue-dependent; consult the product matrix to select the correct variant for a given application Can this insert be used for finishing and light roughing? Yes, the geometry and PCD grade support finishing and light roughing operations on abrasive non-ferrous components Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer Walter Tools.
GX24-3F400N02TM-1 WBH20 WBH20 Wendeplatten - Walter Tools
Take advantage of the CBN grade WBH20 and the dedicated chipbreaker geometry for reliable, high‑wear turning in hardened materials; the combination delivers consistent edge life and predictable process stability. Order the insert directly via Metav Werkzeuge or contact the consultancy team for application advice. GX24-3F400N02TM-1 WBH20 indexable turning insert, CBN grade for hard machining — Walter Tools The GX24-3F400N02TM-1 WBH20 is an indexable turning insert engineered for precision hard machining, designed specifically to handle high wear and high hardness applications in production environments CBN grade WBH20 for hard materials Optimal for hardened steels (H) Stable edge life under high wear Walter CBN series for consistent results Maximum wear resistance for hard turning The insert uses a CBN-based grade to address the most demanding hard‑turning tasks, providing markedly improved wear resistance compared with conventional carbide solutions. Because CBN tolerates high contact stresses and thermal loads, the result is a longer edge life and fewer tool changes, which supports continuous production and lowers overall process cost. The geometry identified by the code 3F400N02TM-1 contributes to controlled chip formation and consistent cutting behaviour when machining hardened steels. Predictable process security and productivity gains Adopting a CBN insert such as this one improves cycle time stability and reduces scrap rates through a more stable cutting edge and repeatable performance. The clear ISO-style designation simplifies tool selection and inventory management, making it easier to standardise processes across multiple machines. In practice, the enhanced stability of the cutting edge leads to fewer interruptions for regrinding or replacement, supporting higher throughput and better adherence to dimensional tolerances in series production. Material compatibility and application guidance The WBH20 grade is optimised for hardened steels and is suitable for pre‑hardened steel operations; depending on the specific cutting conditions and grade characteristics, the insert can also be applied to certain cast materials or high‑strength superalloys. CBN chemistry and the Walter CBN / Hartstoff series philosophy focus on stable chip formation and controlled wear, so the indexable insert is an excellent choice for components where surface integrity and tight geometric control are critical. For demanding hard‑turning applications, consult Metav Werkzeuge to specify the Walter Tools GX24‑3F400N02TM‑1 WBH20 CBN insert and ensure optimal process security and tool life Technical data Article number: GX24-3F400N02TM-1-WBH20-WALTER Product type: indexable turning insert Designation: GX24-3F400N02TM-1 WBH20 Series: Walter CBN / Hartstoff Grade: WBH20 Manufacturer: Walter Tools Core specifications Suitable for: hardened steels (ISO group H) Pre-hardened steel application: yes Chipbreaker code: 3F400N02TM-1 Features & compatibility CBN grade WBH20 for high wear resistance Optimised for hard machining and stable chip control Series: Walter CBN / Hartstoff Material code: H (hardened steels) Design intended for production and repeatable processes FAQ What materials is this insert suitable for? The GX24-3F400N02TM-1 WBH20 indexable turning insert (Walter Tools) is designed primarily for hardened steels and is suitable for pre‑hardened steel applications; grade‑dependent use on cast materials or some superalloys is possible. How does the WBH20 grade compare with carbide alternatives? WBH20, as a CBN grade, provides superior wear resistance and thermal stability compared with standard carbide inserts, making the Walter Tools insert preferable where high hardness and long tool life are required. Is the chipbreaker code important for application setup? Yes. The chipbreaker 3F400N02TM-1 defines chip control and cutting behaviour; this geometry supports stable chip formation and consistent cutting forces during hard turning operations. Can this insert improve process reliability in series production? Using the GX24-3F400N02TM-1 WBH20 from the Walter CBN series helps achieve more predictable tool life and fewer interruptions, which enhances overall process reliability and productivity. Where can detailed application advice be obtained? Application recommendations and further technical details for the GX24-3F400N02TM-1 WBH20 insert are available through Metav Werkzeuge; their consultants can assist with selection based on specific part materials and machine conditions. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
GX24-3F400N04-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM33S grade for secure chip formation and reliable edge life when machining stainless steels and heat‑resistant alloys; order this insert directly via Metav Werkzeuge or consult our specialists for application advice. Turning indexable insert GX24-3F400N04-UF4 WSM33S — Tiger·tec Silver for stainless steels and superalloys (Walter Tools) The GX24-3F400N04-UF4 WSM33S is an indexable turning insert designed for machining rostfreiem Stahl and heat‑resistant superalloys, offering robust chip control and thermal stability in demanding turning operations Tiger·tec Silver coating for thermal stability WSM33S grade for difficult materials 3F400N04‑UF4 chipbreaker for predictable chips Suitable for rostfreiem Stahl and superalloys Boosted productivity through stable cutting performance The Tiger·tec Silver coating together with the WSM33S carbide designation provides a balance between wear resistance and toughness that supports longer cutting intervals. For production environments where component consistency matters, this combination reduces unplanned stops by promoting stable edge life and controlled wear behaviour. The insert’s engineered surface treatment improves resistance to heat‑induced softening, which means operators can maintain effective cutting speeds without sacrificing tool life. This outcome translates into more predictable cycle times and a smoother production flow for medium‑ and high‑mix turning tasks. Confident machining of stainless steels and superalloys with controlled chips Materials such as rostfreiem Stahl and high‑temperature superalloys strain the cutting edge through adhesion, built‑up edge and poor heat conduction. The 3F400N04‑UF4 chipbreaker is optimised to break and evacuate swarf reliably, reducing the risk of entanglement and improving surface finish. By promoting consistent chip formation, the insert lowers the likelihood of secondary damage to the workpiece and downstream operations. The result is a reproducible machining process with better part quality and fewer reworks, especially on components that demand tight tolerances and intact surface integrity. Practical integration for workshop and production use The geometry and grade selection make the insert straightforward to adopt in conventional turning setups without extensive process requalification. The GX24‑3F400N04‑UF4 geometry supports predictable cutting forces and makes tool selection easier for process planners aiming to standardise insert families across several part types. When combined with routine tool‑holder checks and correct cutting data, this insert helps to reduce machine downtime and supports continuous, repeatable performance. For specific cutting parameters or assistance adapting the insert to existing tool‑holders, technical advice is available to ensure the best compromise between productivity and tool life. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and expert guidance for optimising inserts in rostfreiem Stahl and superalloy turning applications Technical Data SKU: GX24-3F400N04-UF4-WSM33S-WALTER Label: Drehwendeschneidplatte GX24-3F400N04-UF4 WSM33S Walter Tools Product type: Turning indexable insert Series: Tiger·tec Silver Grade: WSM33S Facts ISO designation: GX24-3F400N04-UF4 WSM33S Chipbreaker code: 3F400N04-UF4 Material applicability: S / M Special features Coating: Tiger·tec Silver (coated carbide) Suitable for: rostfreiem Stahl (M) and heat‑resistant superalloys / titanium (S) Application focus: turning operations requiring stable chip control and thermal resistance FAQ What materials is this insert recommended for? The GX24‑3F400N04‑UF4 WSM33S insert is recommended for rostfreiem Stahl and heat‑resistant superalloys, reflecting the WSM33S grade’s design for tough, heat‑generating materials. How does the chipbreaker affect machining? The 3F400N04‑UF4 chipbreaker promotes controlled chip formation and evacuation, which helps to prevent chip snarling and supports improved surface finishes during turning. Is this insert suitable for high‑temperature alloy components? Yes, the Tiger·tec Silver coating and the WSM33S grade make the insert appropriate for superalloys and titanium applications where heat resistance and edge stability are required. Can the insert support continuous production runs? The combination of coating and carbide grade is intended to provide predictable tool life and consistent performance, aiding in continuous production when used with appropriate cutting data. What information is encoded in the ISO designation? The ISO code GX24‑3F400N04‑UF4 WSM33S identifies the insert geometry, chipbreaker type and the WSM33S grade, which together define the insert’s intended application and cutting behaviour. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany — The Walter AG (brand: Walter Tools) is part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners. The mentioned brand is cited solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer.
GX24-3F400N20EM-1 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN-grade durability and optimised chip control to maintain consistent production on hard materials; consult the product matrix for exact suitability and contact Metav Werkzeuge for application support or ordering. GX24-3F400N20EM-1 WBS10 indexable turning insert by Walter Tools — CBN grade for hardened steels A GX24-3F400N20EM-1 WBS10 indexable turning insert engineered for high-wear turning tasks, especially suited to machining hardened steels where stable edge life and consistent chip formation are required CBN grade WBS10 for high wear resistance Optimised chip control for hardened materials Stable cutting edge for repeatable performance Designed for demanding, high-hardness turning Maximised wear resistance for prolonged runs The insert is built on a CBN basis, with the WBS10 grade designed to resist abrasive wear in high-hardness machining. Cubic boron nitride (CBN) is a superabrasive material that maintains cutting performance where conventional carbide wears rapidly; this means fewer index changes and longer productive tool life. For operations involving hardened steels, the combination of CBN and robust edge geometry reduces unscheduled stops and tooling costs. Suitability for specific alloys should be verified against the manufacturer’s product matrix to ensure optimal cut data and life. Consistent chip control for improved surface quality Equipped with the 3F400N20EM-1 chipbreaker, the insert provides controlled chip formation that supports stable process behaviour and consistent surface finish. Effective chip control shortens secondary operations and lowers scrap rates by producing predictable swarf shapes and sizes, especially under interrupted or demanding feeds. The chipbreaker geometry contributes directly to heat management at the cutting zone, which in turn preserves the cutting edge and helps maintain repeatable dimensional results across batches. Process reliability that supports productivity The design focusses on a stable cutting edge and repeatability in series production, helping to achieve uninterrupted machining cycles and reliable component tolerances. Integration into standard toolholder systems is possible by matching the ISO designation and checking mounting compatibility; correct pairing helps exploit the insert’s wear properties and maintain consistent cycle times. For machining strategies where high repeatability and predictable tool life are priorities, this CBN solution supports higher throughput and lower overall tooling consumption. For demanding high-hardness turning, choose the Walter Tools CBN grade WBS10; contact Metav Werkzeuge for application advice and availability at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number (SKU): GX24-3F400N20EM-1-WBS10-WALTER Product type: indexable turning insert Manufacturer: Walter Tools ISO designation: GX24-3F400N20EM-1 WBS10 Facts Chipbreaker: 3F400N20EM-1 Grade: WBS10 Series: Walter CBN / Hartstoff Material information: catalogue dependent Special features CBN cutting material for high-hardness applications Optimised chip control geometry Stable cutting edge for repeatable performance Suitability for hardened steels (verify in product matrix) FAQ Which materials is this insert primarily intended for? The GX24-3F400N20EM-1 WBS10 insert is primarily intended for machining hardened steels and similarly demanding materials; final suitability should be confirmed in the Walter product matrix. What advantage does CBN offer compared with carbide? CBN (cubic boron nitride) in the WBS10 grade provides significantly higher wear resistance and thermal stability than conventional carbide, extending service life in high-hardness applications and improving process stability. How does the 3F400N20EM-1 chipbreaker influence machining? The 3F400N20EM-1 chipbreaker is designed to produce controlled chips that aid coolant effectiveness and surface finish, reducing rework and contributing to consistent dimensional results in series production. Can this insert be used for interrupted cuts or hard castings? The insert’s stable cutting edge is suitable for many demanding turning tasks; for interrupted cuts or cast materials, check the product matrix and cutting data to confirm optimal application parameters. How should toolholders be selected for this insert? Match the ISO designation GX24-3F400N20EM-1 WBS10 to a compatible toolholder and verify clamping and seat geometry; correct holder choice is essential to exploit the insert’s performance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands; the offered item is an original, factory-new product of the manufacturer.
GX24-3F400N20FS-M1 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of PKD cutting material, long wear resistance and precise chip control for higher throughput and fewer tool changes; order the insert directly via Metav Werkzeuge or consult our advisers for application-specific selection. GX24-3F400N20FS-M1 WDN10 indexable turning insert – PKD grade for abrasive non‑ferrous materials (Walter Tools) The GX24-3F400N20FS-M1 WDN10 is an indexable turning insert designed for high‑performance machining of abrasive, non‑ferrous workpieces, offering polycrystalline diamond (PKD) cutting edges for extended service life and consistently fine surface quality. PKD cutting material for abrasive non‑ferrous metals High wear resistance for long tool life Precise edge for superior surface finish Walter Tools quality and process reliability Maximise productivity when machining abrasive non‑ferrous alloys This insert uses polycrystalline diamond (PKD) to deliver outstanding wear resistance and dimensional stability when cutting abrasive non‑ferrous materials. The PKD grade offers a hard, wear‑resistant edge that reduces flank wear and maintains profile accuracy over longer intervals, which in turn lowers the frequency of tool changes and minimises unplanned downtime. For production environments where repeatability and part quality are essential, the combination of a robust cutting material and a defined chipbreaking geometry ensures fewer rejects and a more predictable machining cycle. Better surface finish with stable cutting edges and chip control The engineered chipbreaker 3F400N20FS‑M1 provides controlled chip formation and evacuation, reducing built‑up edge and promoting consistent cutting conditions. A stable cutting edge with optimised chip control directly supports improved surface quality and reduces the need for secondary finishing operations. When a high‑quality finish matters, the insert’s geometry helps maintain low vibration and a steady cutting force, so operators achieve smoother part surfaces and tighter tolerances even on demanding, abrasive workpiece materials. Application guidance and selection advantages for production use This insert is supplied in the Walter Schneidstoffsorte open series and the WDN10 grade, intended primarily for abrasive, non‑ferrous applications; check the product matrix to confirm suitability for specific alloys and machining parameters. The solution is aimed at engineers and shop floor planners seeking a cost‑effective route to longer tool life and stable process control. By selecting the appropriate PKD grade and chipbreaker combination, machining operations can expect improved throughput and a reduced total cost of ownership thanks to extended service intervals and reliable cutting behaviour. For tailored advice on integrating the GX24-3F400N20FS‑M1 WDN10 into a production process, or to request a material‑specific recommendation, contact Metav Werkzeuge – our technical team will assist with selection and application data: info@metav-werkzeuge.com, +49 2822 7131930. Technical data SKU: GX24-3F400N20FS-M1-WDN10-WALTER Designation: GX24-3F400N20FS-M1 WDN10 Product type: Indexable turning insert Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Facts Cutting material: PKD (polycrystalline diamond) Chipbreaker: 3F400N20FS-M1 Material specification: Katalogabhängig Special features High wear resistance Optimised chip control Suited for abrasive, non‑ferrous materials Walter Tools process reliability FAQ What materials is this insert intended for? The GX24-3F400N20FS‑M1 WDN10 insert uses a PKD grade optimised for abrasive, non‑ferrous materials and is recommended where high wear resistance and fine surface finish are required. How does the chipbreaker affect machining performance? The 3F400N20FS‑M1 chipbreaker is designed to control chip formation and evacuation, improving surface finish and reducing built‑up edge, which leads to more stable cutting and fewer interruptions. Is this insert suitable for high‑volume production? Yes; the PKD grade and durable edge geometry provide extended tool life and consistent part quality, supporting higher machine utilisation and reduced tool change frequency in production environments. Where can application‑specific data be obtained? Application matrices and cutting data are available from Metav Werkzeuge; consult the technical team to confirm the GX24‑3F400N20FS‑M1 WDN10 suitability for specific alloys and cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no association between our company and the mentioned brands. The offered article is original, brand‑new merchandise of the manufacturer.
GX24-3F400N20TM-1 WBH20 WBH20 Wendeplatten - Walter Tools
Take advantage of the combination of CBN wear resistance, consistent edge stability, and optimised chip control for reliable hard-turning performance; order the original insert through Metav Werkzeuge or request specialist advice from their consultants. GX24-3F400N20TM-1 WBH20 indexable turning insert — CBN grade for hardened steels (Walter Tools) The GX24-3F400N20TM-1 WBH20 is a CBN indexable turning insert engineered for hard turning of hardened steels and comparable high-hardness materials. CBN grade WBH20 for hard turning Optimised chip control 3F400N20TM-1 High edge stability and wear resistance Sustained productivity through wear-resistant CBN technology The CBN-based WBH20 grade delivers exceptional wear resistance, which reduces the frequency of insert changes and supports longer uninterrupted cycles. Because CBN remains dimensionally stable at high temperature and abrasive contact, the insert maintains a predictable cutting edge, enabling consistently high productivity in hard-turning operations. This benefit reduces machine downtime and contributes to a steadier output rate on production lines handling hardened components. Consistent surface quality and process stability A stable cutting edge leads directly to reproducible surface finishes and tighter tolerances. The insert’s geometry and the 3F400N20TM-1 chipbreaker are optimised for secure chip formation, decreasing the risk of built-up edge or erratic tool marks. As a result, the machining process becomes more robust: feed and speed windows can be relied upon, and downstream processes benefit from fewer rework operations. The overall effect is improved process stability and predictable part quality. Specifically developed for hard machining requirements This insert is intended for machining tasks where material hardness and cutting forces are elevated. The designation H indicates suitability for hardened steels, while the Walter CBN / Hartstoff series reflects a focus on hard-material applications. The insert’s composition and design support effective material removal from materials that challenge traditional carbide grades, making it a practical choice for components subjected to heat treatment or produced from wear-resistant alloys. Practical guidance for machining and tool selection When implementing the insert in a production setting, attention to secure clamping and correct seat geometry is advisable to exploit the full potential of the CBN grade. Careful selection of cutting parameters—moderate depths of cut combined with appropriate speeds and feeds for the material class—maximises tool life and surface integrity. Where process windows are narrow, the insert’s reliable performance simplifies parameter optimisation and shortens the commissioning phase for new workpieces. Tool life economy and handling recommendations Longer tool life achieved through CBN performance directly reduces tooling costs per part and lowers total cost of ownership in high-volume or continuous machining environments. Handling is straightforward: indexable inserts allow quick seat changes and predictable re-sharpening cycles are avoided. For applications demanding highest reproducibility and minimal variation, the combination of edge stability and optimised chip control contributes to measurable savings over the service life of the tool. For demanding hard-turning tasks, contact Metav Werkzeuge for a technical consultation and to source original Walter Tools GX24-3F400N20TM-1 WBH20 inserts — Metav Werkzeuge can advise on parameter settings and supply options Technical data Article number: GX24-3F400N20TM-1-WBH20-WALTER Product type: Indexable turning insert (drehwendeschneidplatte) Series: Walter CBN / Hartstoff Grade: WBH20 Chipbreaker: 3F400N20TM-1 ISO designation: GX24-3F400N20TM-1 WBH20 Numbers / Facts No numerical data provided in the source Special features / Applications Suitable for hardened steels (H) Applicable to pre-hardened steel machining CBN insert for hard and highly abrasive tasks Designed for stable chip formation and process security Walter Tools product, CBN grade for hard turning FAQ What materials is this insert intended for? The insert is designed primarily for hardened steels (designation H); its CBN WBH20 grade also suits applications where high wear resistance is required. How does the WBH20 grade improve process stability? WBH20 provides high edge stability and thermal resistance; the stable cutting edge reduces dimensional drift and supports reproducible surface quality when hard turning. Is the GX24-3F400N20TM-1 suitable for continuous production? Yes, the GX24-3F400N20TM-1 WBH20 insert is aimed at production environments where long tool life and predictable change intervals matter. Which chipbreaker should be selected for heavy interrupted cuts? The integrated 3F400N20TM-1 chipbreaker is optimised for controlled chip formation; for very heavy interruptions, review clamping and parameter windows to ensure cutting stability. Are these inserts original Walter Tools products? The described insert is an original Walter Tools item from the Walter CBN / Hartstoff series, intended for reliable performance in hard machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is a brand of Walter AG and references to brands are for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the brand owners. The offered article is an original, factory-new product from the manufacturer.
GX24-3F500N02FS-F1 WDN10 Wendeplatten - Walter Tools
Benefit from the combination of PCD-grade WDN10, precise chip control and long tool life for reliable turning of non‑ferrous and abrasive, non‑ferrous materials. Take advantage of consistent cutting performance and reduced downtime; procure the inserts via Metav Werkzeuge or request application advice from our consultants. GX24-3F500N02FS-F1 WDN10 – Indexable turning insert, PCD grade for non‑ferrous materials | Walter Tools The GX24-3F500N02FS-F1 WDN10 is an indexable turning insert engineered to deliver high wear resistance and stable cutting when machining non‑ferrous and abrasive, non‑ferrous workpieces. PCD grade WDN10 for extreme wear resistance Precision chipbreaker 3F500N02FS‑F1 Optimised for non‑ferrous, abrasive alloys Designed for stable cutting edge and repeatability Higher productivity through PCD tool life This indexable insert uses a polycrystalline diamond (PCD) grade, identified as WDN10, which provides significantly higher wear resistance compared with conventional carbide in abrasive, non‑ferrous applications. The result is longer tool life and fewer insert changes, which directly reduces machine downtime and tooling handling. For production environments where repeatability and uptime matter, the PCD construction enables consistent surface quality and predictable component tolerances over extended runs. Precise chip control for smoother turning The integrated 3F500N02FS‑F1 chipbreaker is designed to produce reliable chip formation and evacuation on non‑ferrous, abrasive materials. Stable chip control minimises rework and tool collisions, improving cycle stability and operator safety. The insert’s geometry supports a steady cutting edge behaviour, which enhances surface finish and reduces the need for secondary operations. This technical design converts directly into efficiency gains on the shop floor. Application guidance and material suitability The cutting material is catalog‑dependent, but the grade WDN10 is specified for non‑ferrous and other abrasive, non‑ferrous workpieces thanks to its PCD characteristics. For machinists unfamiliar with PCD, it is a diamond‑based cutting layer sintered onto a substrate that resists abrasive wear and maintains a sharp edge. Where workpiece composition or abrasiveness varies, assessment against the product matrix is recommended to confirm optimal use and feed/speed windows. Contact Metav Werkzeuge for tailored cutting data, application recommendations and to source Walter Tools WDN10 PCD inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: GX24-3F500N02FS-F1-WDN10-WALTER Type: Indexable turning insert Manufacturer: Walter Tools Grade: WDN10 Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: 3F500N02FS-F1 Designation: GX24-3F500N02FS-F1 WDN10 Material (tool): Katalogabhängig Core specifications No numerical specifications provided in the source data Special features Polycrystalline diamond (PCD) grade Optimised chip control geometry Intended for non‑ferrous and abrasive, non‑ferrous materials Series and grade information included for process selection FAQ What materials is this insert best suited for? The GX24-3F500N02FS-F1 WDN10 insert is intended for machining non‑ferrous and abrasive, non‑ferrous materials, exploiting the PCD grade for improved wear resistance. How does the PCD grade WDN10 differ from carbide inserts? WDN10 uses a polycrystalline diamond cutting layer that offers superior abrasion resistance and edge retention on abrasive non‑ferrous alloys compared with typical carbide grades. What advantage does the 3F500N02FS‑F1 chipbreaker give? The 3F500N02FS‑F1 chipbreaker promotes controlled chip formation and evacuation, which supports consistent surface quality and reduces the risk of chip‑related interruptions. Is special handling or inspection required for PCD inserts? PCD inserts like WDN10 require standard handling care to avoid edge damage; regular inspection ensures the cutting edge condition matches process requirements and maintains predictable production quality. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3F500N04-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
The balanced combination of Tiger‑tec Silver coating, the WSM33S carbide grade and an optimised chipbreaker delivers reliable performance on stainless steels and heat‑resistant superalloys; order the GX24-3F500N04-UF4 WSM33S directly via Metav Werkzeuge or contact the technical consultants for application advice. GX24-3F500N04‑UF4 WSM33S — Turning insert (Tiger‑tec Silver) by Walter Tools The GX24-3F500N04‑UF4 WSM33S is a coated carbide turning insert engineered for demanding machining of stainless steels and heat‑resistant superalloys (ISO groups M and S), offering stable edge life and consistent chip formation. Tiger‑tec Silver coating for extended wear Optimised for stainless steels and superalloys Stable cutting edge under high temperatures Chipbreaker 3F500N04‑UF4 for reliable chip control Optimised grade and coating for demanding materials The insert is based on the WSM33S grade within the Tiger‑tec Silver family, a coated carbide solution designed to resist thermally induced wear and edge degradation when machining tough materials. The combination of a hard, wear‑resistant coating and a substrate tuned for toughness supports consistent performance on stainless steels and nickel‑based alloys. For production environments that require repeatable surface quality and reduced flank wear, this specification reduces the frequency of tool changes and contributes to predictable process windows. Chip control and cutting edge stability for steady cycles The integrated chipbreaker 3F500N04‑UF4 is optimised to produce controllable, segmented chips in interrupted or continuous cuts, which lowers the risk of chip entanglement and improves evacuation. Good chip control lessens the thermal load on the edge and minimises built‑up edge formation, resulting in fewer reworks and less machine downtime. The geometry promotes a stable cutting line, helping to maintain dimensional consistency across batches and enhancing cycle reliability on cylindrical turning operations. Productivity benefits through wear resistance and repeatability The coated surface and grade chemistry provide improved wear resistance, translating into longer productive cutting lengths and a reduced total cost per component in many applications. Because the cutting edge maintains its integrity under high temperatures, operators can run conservative to moderate feeds with confidence in surface finish consistency. The insert’s properties support higher process stability, which is particularly beneficial for small‑batch series and high‑value components where downtime and scrap are costly. Practical integration and material compatibility in workshops Marked for ISO groups M and S, the insert is suitable for conventional toolholders and typical turning tool systems; the ISO designation simplifies tool selection and inventory management. The code specifies its chipbreaker and edge preparation, aiding quick matching to existing operations and cutting data sheets. For specialised materials or unusual component geometries, Metav Werkzeuge’s technical team can advise on holder choices and cutting parameter strategies to exploit the insert’s strengths while safeguarding component tolerances. For reliable high‑temperature performance choose Walter Tools Tiger‑tec Silver inserts — contact Metav Werkzeuge for technical advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GX24-3F500N04-UF4-WSM33S-WALTER SKU/Label: Drehwendeschneidplatte GX24-3F500N04-UF4 WSM33S Walter Tools Type: Turning insert Grade: WSM33S Series: Tiger‑tec Silver Chipbreaker: 3F500N04‑UF4 Material group: S / M Facts No additional numerical data provided Special features Coated carbide grade Suited for ISO groups M (stainless steels) and S (superalloys/titanium) Optimised chip control geometry Designed for stable cutting edge and improved wear resistance FAQ What materials are recommended for this insert? The GX24-3F500N04‑UF4 WSM33S insert is recommended for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), where heat resistance and edge stability are critical. What does the Tiger‑tec Silver designation mean? Tiger‑tec Silver denotes a coated carbide technology combining a wear‑resistant coating with a robust substrate to enhance wear resistance and maintain cutting edge integrity under elevated temperatures. How does the 3F500N04‑UF4 chipbreaker affect production? The 3F500N04‑UF4 chipbreaker is designed for dependable chip control, producing segmented or compact chips that improve evacuation and reduce the likelihood of chip‑related interruptions. Is the insert compatible with standard toolholders? Yes, the insert’s geometry and ISO designation make it compatible with common turning toolholders designed for indexable inserts; selection of the correct clamping and seat type ensures optimal performance. Can this insert improve overall process stability? By combining a stable cutting edge with effective chip control, the insert supports more predictable tool life and surface quality, contributing to enhanced process stability in serial production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
GX24-3F500N04EM-1 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the CBN wear resistance and Walter Tools' proven cutting‑edge stability to secure predictable tool life and consistent surface quality in hard turning applications; order or request application advice via Metav Werkzeuge for an efficient integration into production. GX24-3F500N04EM-1 WBS10 – indexable turning insert (CBN) for hardened steels | Walter Tools The GX24-3F500N04EM-1 WBS10 is an indexable turning insert with a CBN grade, engineered for high‑wear machining of hardened steels and comparable high‑strength materials. CBN grade WBS10 for extreme wear resistance Designed for hardened steels and superalloys Walter CBN series ensures stable cutting edge Optimised chip control for productive machining Longer, more predictable service life for hard turning The combination of CBN chemistry and the WBS10 specification delivers markedly improved tool life in hard‑machining operations compared with conventional carbide solutions. The high abrasion resistance of the cutting material reduces flank wear and extends effective cutting intervals, which translates into fewer tool changes and reduced unscheduled stoppages. For production planning this means a steadier process window and improved overall productivity when machining components with hardened surfaces. Consistent edge stability for repeatable surface quality The Walter CBN series is manufactured to keep a stable cutting edge under thermally and mechanically demanding conditions, promoting consistent part quality over long tool runs. A durable edge reduces the need for rework and supports tight tolerances across serial production, improving first‑pass yield and lowering downstream inspection effort. Emphasis on surface finish and dimensional repeatability makes this insert suitable where consistent component appearance and accurate form are priorities. Controlled chip formation to enhance machining efficiency The geometry marked 3F500N04EM‑1 combines a defined chipbreaker concept with the CBN material to improve chip control during interrupted and continuous cuts. Improved chip evacuation reduces the risk of re‑cutting and tool damage, enabling higher stable cutting speeds and better utilisation of machine spindle time. The result is higher material removal rates in constrained machining envelopes while maintaining process safety and reducing cycle variability. Designed for demanding materials with clear process guidance This insert belongs to the Walter CBN / Hartstoff series and is primarily intended for hardened steels; depending on the specific workpiece and the product matrix, the same grade can be applicable to certain castings or superalloys. Material compatibility should be confirmed against the manufacturer's application matrix to ensure the best performance. Clear selection of grade and geometry supports process reliability and reduces trial iterations in set‑ups. Contact Metav Werkzeuge for tailored application advice on Walter Tools CBN inserts and to discuss suitable tool holders and process parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct support Technical Data Article number: GX24-3F500N04EM-1-WBS10-WALTER Product: indexable turning insert Manufacturer: Walter Tools Facts No numerical data provided in the source Special features Series: Walter CBN / Hartstoff Grade: WBS10 Chipbreaker / geometry: 3F500N04EM-1 Material designation: Katalogabhängig Product type: Drehwendeschneidplatte FAQ Which materials is this insert primarily suited to? The GX24-3F500N04EM-1 WBS10 is primarily suited to hardened steels; depending on the application matrix the CBN grade may also be suitable for certain castings or superalloys, as indicated by Walter Tools. What advantage does a CBN grade deliver in turning hardened parts? CBN provides superior abrasion resistance and thermal stability, which helps the insert maintain cutting geometry and deliver longer service life when machining hardened components compared with traditional carbide inserts. How does the chipbreaker geometry affect machining? The 3F500N04EM‑1 geometry is designed to improve chip formation and evacuation, reducing the risk of chip entanglement and enabling more consistent cutting conditions during both continuous and interrupted turning. Is this insert compatible with standard indexable turning systems? The insert is an indexable turning insert intended for standard clamping systems that accept the given ISO designation; compatibility with a specific holder must be verified by comparing geometries and clamping features. How should the correct grade and geometry be selected for an application? Selection should follow material type, hardness and the intended cutting parameters; the Walter CBN / Hartstoff series guidance and the product matrix are appropriate starting points to ensure optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and indicate no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
GX24-3F500N04TM-1 WBH20 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise chip control and suitability for hardened steels to maintain process stability and reduce rework. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. GX24-3F500N04TM-1 WBH20 turning indexable insert — CBN grade for hardened steels | Walter Tools The GX24-3F500N04TM-1 WBH20 is a CBN indexable insert designed for demanding hard-turning tasks, delivering stable cutting behaviour and long tool life when machining hardened steels. CBN grade WBH20 for hardened steels Optimised 3F500N04TM-1 chip control High wear resistance and stable edge Walter Tools quality for consistent results Maximise uptime with wear-resistant CBN performance The use of CBN in the WBH20 grade provides a material solution specifically engineered for the high abrasion and contact temperatures found in hard machining. CBN, a superabrasive, maintains a stable cutting edge under elevated thermal loads, which reduces flank wear and the need for frequent index changes. For production environments where components are heat-treated to high hardness levels, this insert supports consistent tolerances and less scrap by extending the interval between tool changes while preserving surface integrity. Predictable chip formation for fewer interruptions The integrated 3F500N04TM-1 chipbreaker is targeted at secure chip control during hard turning, transforming long, stringy swarf into manageable chips and thus lowering the risk of process interruptions. Improved chip control contributes directly to shorter cycle times and safer unattended operation, while the resulting surface finish benefits downstream processes. Explaining the technical term: a chipbreaker modifies how metal deforms ahead of the cutting edge so that chips curl and break in a controlled manner, enhancing both productivity and shop-floor safety. Process reliability and straightforward integration As an indexable insert, the geometry and grade combination enables repeatable performance across multiple insert seats and toolholders. The design focuses on predictable edge geometry and wear characteristics to support stable machining windows, which simplifies machining data preparation and reduces process variation. For shops standardising on hard-turning operations, the insert assists in achieving reproducible part quality, minimising set-up iterations and increasing overall throughput. Typical applications and measurable benefits This CBN insert is intended for the hard machining of components such as shafts, bearing seats and heat-treated profiles where hardened steels are encountered. The primary benefits are improved part finish, extended insert life and reduced secondary processing. The result is a stronger cost-in-use profile: fewer tool changes, less rework and more consistent production output. Technical teams can expect enhanced process security and repeatability when the insert is applied within the recommended cutting parameters for hard-turning operations. Contact Metav Werkzeuge for application-specific recommendations or to secure supply of the Walter Tools GX24-3F500N04TM-1 WBH20 insert for high-demand hard turning tasks Technical data SKU: GX24-3F500N04TM-1-WBH20-WALTER Type: Turning indexable insert ISO designation: GX24-3F500N04TM-1 WBH20 Grade: CBN (WBH20) Facts Series: Walter CBN / Hartstoff Chipbreaker: 3F500N04TM-1 Material code: H Special features Suitable for: hardened steels (H) Application: hard turning, finishing of heat-treated components Manufacturer: Walter Tools FAQ What materials is this insert suited for? The insert is specified for machining hardened steels; the WBH20 CBN grade is optimised for high-hardness applications where abrasion resistance is critical. How does the 3F500N04TM-1 chipbreaker help production? The chipbreaker provides optimised chip control, producing short, controlled chips that reduce floor hazards and machine stoppages, thereby improving cycle reliability for hard-turning operations. Can the insert improve surface finish on hardened parts? Yes, the combination of CBN grade WBH20 and the controlled edge geometry supports improved surface integrity and dimensional stability on hardened components. Is this insert suitable for continuous production runs? The wear-resistant nature of the WBH20 grade and its stable cutting behaviour make the insert well suited to continuous or high-volume hard-turning processes where consistent output is required. Where can technical parameters and cutting data be obtained? Cutting data and application guidance are available from Metav Werkzeuge; the insert’s series and chipbreaker details facilitate selection of appropriate speeds and feeds for hardened-steel machining. The Walter AG (brand: Walter Tools) with headquarters in Tübingen belongs to the group of leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners and are used for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX24-3F500N25-RD4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP23S grade for robust, repeatable performance when machining steel and cast iron; the chipbreaker geometry ensures stable chip formation and consistent surface finish. Order the GX24-3F500N25-RD4 WKP23S directly via Metav Werkzeuge or consult the technical team for application advice. GX24-3F500N25-RD4 WKP23S — Turning indexable insert, Tiger·tec Silver, for steel and cast iron (Walter Tools) GX24-3F500N25-RD4 WKP23S is a turning indexable insert engineered for high-process stability in the machining of steel and cast iron components, suitable for industrial turning operations where consistent results and tool life are decisive Tiger·tec Silver coating for extended tool life WKP23S grade optimised for steel and cast iron Stable chip control with 3F500N25-RD4 geometry Designed for consistent industrial productivity Reliable machining performance for steel and cast iron The combination of the Tiger·tec Silver coating and the WKP23S carbide grade provides a secure basis for machining steel and cast iron. The coated carbide construction is formulated to tolerate the typical heat and wear mechanisms encountered when cutting these material groups, so the result is improved tool life and fewer interruptions. This reliability translates into steadier cycle times and a lower frequency of tool changes in production environments. Consistent chip control to protect productivity The insert’s 3F500N25-RD4 chipbreaker geometry focuses on reliable chip control, reducing the risk of built-up edge and erratic chip forms that can affect surface finish and machine uptime. With predictable chip behaviour, process planners gain greater control over feed and speed windows, which supports sustained surface quality and minimises rework. The design aims to keep chips compact and manageable for automated and manual turning operations. Coating and grade engineered for industrial demands The Tiger·tec Silver series delivers a balanced performance between wear resistance and edge stability; this is particularly beneficial for mixed-production shops processing a range of steels and cast irons. The WKP23S grade is a coated carbide that emphasises abrasion resistance while retaining a robust cutting edge, helping to maintain dimensional consistency across long runs. The result is better repeatability and a higher degree of process security for demanding turning tasks. Contact Metav Werkzeuge today to discuss how the Tiger·tec Silver WKP23S insert can improve cycle times and process reliability; request the GX24-3F500N25-RD4 via Metav Werkzeuge or call +49 2822 7131930 for tailored technical support Technical Data Article number / SKU: GX24-3F500N25-RD4-WKP23S-WALTER Designation: GX24-3F500N25-RD4 WKP23S Product type: Turning indexable insert Facts Material designation: P / K (steel, cast iron) Grade: WKP23S Chipbreaker: 3F500N25-RD4 Special features Series: Tiger·tec Silver Coated carbide (beschichtetes Hartmetall) Application: Machining of steel and cast iron (ISO 513 groups P and K) Manufacturer: Walter Tools FAQ What materials is this insert designed for? The GX24-3F500N25-RD4 WKP23S is formulated for machining steel and cast iron, corresponding to ISO 513 groups P and K. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating increases wear resistance and improves thermal performance, which helps extend the service life of the WKP23S insert under typical turning conditions. Which chipbreaker does this insert use and why is it important? This insert features the 3F500N25-RD4 chipbreaker geometry, designed to promote compact, controllable chips and protect surface finish during continuous turning operations. Is the WKP23S grade suitable for long production runs? Yes; the WKP23S grade is balanced for abrasion resistance and edge stability, supporting repeatable performance and reduced tool-change frequency in production environments. The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalcutting and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools). Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX24-3F500N25-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
The combination of a heat‑resistant Tiger·tec Silver coating and the WSM33S grade delivers stable cutting edges and extended tool life for demanding turning operations; the robust chipbreaker geometry provides reliable chip control and process security. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. GX24-3F500N25-RD4 WSM33S indexable turning insert — Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) The GX24-3F500N25-RD4 WSM33S indexable turning insert is a coated carbide insert engineered for machining rostfreier Stahl and heat‑resistant superalloys, offering high thermal stability and consistent edge life. Tiger·tec Silver coating for high temperature stability WSM33S grade optimised for superalloys and titanium Geometry 3F500N25‑RD4 for reliable chip control Suited to rostfreier Stahl machining Longer tool life through heat‑resistant coating The combination of the Tiger·tec Silver coating and the WSM33S grade provides a wear‑resistant surface that copes well with elevated cutting temperatures. This means fewer tool changes and improved machine uptime in production environments that machine rostfreier Stahl or heat‑resistant alloys. The coating reduces flank and crater wear while the substrate ensures toughness; together they support consistent cutting edge performance and a lower cost per component in medium‑ to high‑volume turning. Controlled chips and stable cutting for uninterrupted production The specified geometry 3F500N25‑RD4 acts as a precise chipbreaker, promoting short, segmented chips and predictable evacuation. Reliable chip control reduces the risk of entanglement, minimises vibration and supports a consistent surface finish. For shops processing difficult‑to‑machine materials, this geometry helps avoid built‑up edge and sudden tool failure, supporting continuous production and higher first‑pass yields. Productivity gains for demanding material classes Designed for the ISO material groups M and S, the insert targets applications with rostfreier Stahl and nickel‑based or titanium alloys that generate heat and strain the cutting edge. The WSM33S grade is optimised for these conditions, delivering process security and repeatable results. Employing this insert can reduce the need for conservative feeds and speeds, translating into shorter cycle times and better utilisation of machine capacity for turning operations. Contact Metav Werkzeuge today to discuss suitability for specific rostfreier Stahl or superalloy components and to request application support from the technical team Technical Data Article number: GX24-3F500N25-RD4-WSM33S-WALTER Designation: GX24-3F500N25-RD4 WSM33S Series: Tiger-tec Silver Grade: WSM33S Geometry: 3F500N25-RD4 Material group: S / M Suitable for: rostfreier Stahl Facts SKU: GX24-3F500N25-RD4-WSM33S-WALTER Indexable turning insert type: Drehwendeschneidplatte Coating technology: Tiger·tec Silver Special features Coated carbide grade WSM33S Optimised for hard‑to‑machine materials Reliable chipbreaker geometry for controlled chips Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The insert is designed for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S); the WSM33S grade and Tiger·tec Silver coating provide thermal stability for these materials. How does the geometry 3F500N25‑RD4 improve chip control? The 3F500N25‑RD4 chipbreaker produces short, segmented chips and promotes safe evacuation, reducing vibration and the likelihood of built‑up edge during turning. Can this insert be used for titanium alloys? Yes, the WSM33S grade is suitable for titanium and similar heat‑resistant materials where cutting edge stability and heat resistance are required. Where can the GX24‑3F500N25‑RD4‑WSM33S be ordered from? The insert is available via Metav Werkzeuge; technical enquiries and order support can be provided by the Metav team for specific application requirements. Hersteller: Walter Tools — Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
GX24-3F500N25-RF7 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating, WSM33S grade and optimised chipbreaker for reliable machining of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application support. GX24-3F500N25-RF7 WSM33S indexable turning insert — for stainless steels and superalloys | Walter Tools GX24-3F500N25-RF7 WSM33S is an indexable turning insert engineered for stable cutting in demanding materials such as rostfreie Stähle and high‑temperature alloys Tiger·tec Silver coated carbide grade WSM33S Optimised chipbreaker 3F500N25‑RF7 Suited for rostfreie Stähle and superalloys Stable cutting edge for extended tool life Consistent performance in difficult materials The GX24-3F500N25-RF7 WSM33S insert delivers a balance of wear resistance and edge stability tailored to high‑duty turning applications. The WSM33S grade is designed for machining stainless steels and heat‑resistant superalloys (ISO groups M and S), where chip control and thermal resilience are critical. In production environments prone to built‑up edge and fluctuating temperatures, the insert’s combination of geometry and grade supports predictable performance and reduced rework rates. Coating and geometry that extend tool life The Tiger·tec Silver technology provides a hard, wear‑resistant surface while preserving fracture toughness at the cutting edge. Combined with the optimised chipbreaker 3F500N25‑RF7, the insert promotes stable chip formation and controlled evacuation, which contributes directly to longer tool life and fewer interruptions for tool changes. This configuration is particularly effective where heat accumulation and poor thermal conductivity of the workpiece demand a cutting system with enhanced heat resistance and edge integrity. Practical benefits for workshop and production planning Selection of the right insert influences cycle time, surface quality and overall process security. Using a grade with proven stability reduces the risk of unexpected tool failure and supports higher feed rates with confidence. For operations involving mixed batches of rostfreie Stähle and superalloys, the insert’s versatility simplifies tool inventory and streamlines setup. If clarification is required on grade matching or recommended cutting parameters, Metav Werkzeuge’s specialists provide application guidance and machining data to support process optimisation. For secure, process‑efficient turning with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX24-3F500N25-RF7-WSM33S-WALTER Designation: GX24-3F500N25‑RF7 WSM33S Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Grade: WSM33S Chipbreaker: 3F500N25‑RF7 Material group: S / M Suitable for: rostfreie Stähle (M), superalloys/titanium (S) Special features Coating technology: Tiger·tec Silver (coated carbide) Application focus: heavy‑duty and difficult‑to‑machine materials Benefit: optimised chip control and stable cutting edge FAQ What materials is this insert designed to machine? The GX24‑3F500N25‑RF7 WSM33S insert is specified for rostfreie Stähle (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering reliable chip control in these material classes. How does the Tiger·tec Silver coating benefit machining performance? The Tiger·tec Silver coating on the WSM33S grade increases wear resistance while maintaining edge toughness, improving tool life and dimensional stability during extended turning operations. Which chipbreaker is fitted and what is its purpose? The insert uses the 3F500N25‑RF7 chipbreaker, optimised for controlled chip formation and evacuation to reduce cutting forces and enhance surface finish. Is this insert suitable for finishing or roughing operations? Depending on insert geometry and cutting parameters, the combination of WSM33S grade and the optimised chipbreaker supports both stable roughing and semi‑finishing in demanding materials. How does the insert contribute to production reliability? By offering a stable cutting edge and consistent chip control, the insert helps to reduce unscheduled tool changes and machining variability, supporting higher process security. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not imply any affiliation between our company and the manufacturers.
GX24-3F500N25EM-1 WBS10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting grade WBS10 and proven Walter CBN series design to achieve stable hard‑turning performance and reduced tooling costs; order the insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. GX24-3F500N25EM-1 WBS10 — Turning indexable insert, CBN grade for hardened steels (Walter Tools) GX24-3F500N25EM-1 WBS10 is a CBN turning indexable insert designed for high‑wear, hard‑turning applications, particularly where consistent edge life and surface integrity are required CBN grade WBS10 for hardened steels High wear resistance and long tool life Optimised chip control for stable turning Maximised process stability for hard turning The core advantage of a CBN insert in the Walter CBN series is predictable performance when machining hardened workpieces. The CBN‑based cutting material in this insert delivers stable cutting edges under elevated temperatures and abrasive contact, which reduces variation in cycle times and enhances repeatability across batches. For production environments where surface finish and dimensional consistency matter, this turning insert supports a reliable process window and fewer tool changes, contributing to measurable productivity gains. Lower tooling costs through extended life and reliable chip control By using the WBS10 grade, the component benefits from long tool life and improved resistance to flank wear relative to conventional carbides in comparable conditions. The insert’s geometry—reflected in the span‑breaker designation—promotes optimised chip control, which reduces the risk of workpiece damage and simplifies chip evacuation in turning operations. The result is lower overall tooling consumption and reduced downtime for tool changes, so cost per component falls even when machining demanding materials. Material guidance and application notes for best results The GX24‑3F500N25EM‑1 WBS10 is intended primarily for hard and highly abrasive materials; suitability for specific workpiece alloys should be verified against the manufacturer’s product matrix. Depending on the grade matrix, the insert can be effective on hardened steels and, in some cases, on certain cast or superalloy applications. For first‑time implementation, process engineers are advised to validate cutting parameters under representative conditions and to adjust feed and speed to match machine dynamics and clamping rigidity. This measured approach ensures the insert’s advantages—surface integrity and tool life—are realised in everyday production. For demanding hard‑turning tasks, request the Walter Tools GX24-3F500N25EM-1 WBS10 through Metav Werkzeuge for personalised application advice and local availability: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: GX24-3F500N25EM-1-WBS10-WALTER Label: Drehwendeschneidplatte GX24-3F500N25EM-1 WBS10 Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Grade: WBS10 Chipbreaker / geometry: 3F500N25EM-1 ISO designation: GX24-3F500N25EM-1 WBS10 Material specification: Katalogabhängig Numerical data No numerical cutting parameters provided Special features CBN cutting material (hard turning) Optimised chip control geometry Intended for high wear applications Material suitability subject to product matrix Catalogue‑dependent substrate and coating details FAQ What materials is this insert intended for? The GX24-3F500N25EM-1 WBS10 is purpose‑designed for hardened steels and other high‑wear materials; final suitability should be checked against the product matrix supplied for the Walter Tools insert. How does the WBS10 grade compare to carbide in hard turning? WBS10, as a CBN grade, provides superior wear resistance and thermal stability versus carbide when machining hardened workpieces, leading to longer tool life and more consistent surface quality with the GX24‑3F500N25EM‑1 insert. Is special clamping or tooling required to use this insert? Standard rigid clamping and a suitable tool holder for turning inserts are recommended; the GX24‑3F500N25EM‑1 benefits most from stable setup to exploit its optimised chip control and wear characteristics. Can this insert be used on cast iron or superalloys? Depending on the product matrix, the insert may be applicable to certain cast irons or superalloys, but material‑specific testing is advised before series production with the GX24‑3F500N25EM‑1 WBS10. Where can application data and recommended cutting parameters be obtained? Application data and recommended parameters for the Walter Tools GX24-3F500N25EM-1 WBS10 are available from Metav Werkzeuge or the Walter technical documentation; verification under actual machine and workpiece conditions is advised. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
GX24-3F500N25FS-M1 WDN10 Wendeplatten - Walter Tools
The combination of polycrystalline diamond (PKD) grade WDN10 and an optimised chipformer delivers long tool life and consistent surface quality for abrasive, non‑ferrous turning operations. Benefit from reduced tooling costs per part and reliable performance in demanding applications; order the GX24-3F500N25FS-M1 WDN10 directly via Metav Werkzeuge or request application advice from the consultants. GX24-3F500N25FS-M1 WDN10 turning indexable insert (PKD) by Walter Tools — for abrasive non‑ferrous materials GX24-3F500N25FS-M1 WDN10 is a high‑performance turning indexable insert fitted with a polycrystalline diamond grade, designed for precision machining of abrasive non‑ferrous workpieces. Polycrystalline diamond (PKD) grade WDN10 Exceptional wear resistance for abrasive materials Optimised 3F500N25FS-M1 chipformer design Suitable for non‑ferrous and abrasive workpieces Maximise uptime with a wear‑resistant PKD grade The use of PKD (polycrystalline diamond) in the WDN10 grade provides outstanding wear resistance when machining abrasive, non‑ferrous materials. This hardness translates into longer tool life and fewer insert changes, which lowers the tooling cost per finished component and reduces process interruptions. For production environments where repeatability and predictable tool performance are priorities, the indexable insert delivers consistent cutting behaviour and a reliable service interval between tool changes. Stable chip control for consistent surface quality The 3F500N25FS-M1 chipformer geometry has been engineered to promote stable chip formation and smooth evacuation under typical turning conditions for non‑ferrous alloys. Stable chip control reduces the risk of built-up edge and improves surface finish, making post‑process rework less likely. For technicians less familiar with chipformer terminology: the chipformer shapes the metal flow at the cutting edge so that chips break into manageable segments, preventing tangling and minimising tool‑workpiece interference while maintaining dimensional accuracy. Application guidance and material suitability The insert is intended primarily for machining non‑ferrous and other abrasive, non‑ferrous materials; suitability for specific alloys should be verified against the product matrix. Where abrasive inclusions or particulate reinforcements are present, the PKD grade helps maintain a sharp cutting edge for longer, contributing to improved surface finish and reduced scrap rates. Trials under representative production conditions are recommended to confirm optimal feed and speed parameters and to validate the expected efficiency gains. For PKD turning tasks, contact Metav Werkzeuge to arrange a technical consultation and secure supply of the GX24-3F500N25FS-M1 WDN10 from Walter Tools; Metav Werkzeuge is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt application support and availability information. Technical data Article number: GX24-3F500N25FS-M1-WDN10-WALTER Designation: GX24-3F500N25FS-M1 ISO designation: GX24-3F500N25FS-M1 WDN10 Product type: turning indexable insert Grade: WDN10 Series: Walter Schneidstoffsorte - Serie offen Chipformer: 3F500N25FS-M1 Material information: Katalogabhängig Technical facts No measurable technical specifications provided Special features Polycrystalline diamond (PKD) cutting material Optimised chipformer geometry 3F500N25FS-M1 Designed for abrasive, non‑ferrous workpieces Walter Tools manufacturing quality and consistency FAQ What materials is this insert suitable for? The GX24-3F500N25FS-M1 WDN10 insert is designed for non‑ferrous and other abrasive, non‑ferrous materials; specific alloy suitability should be checked in the product matrix. How does PKD behaviour benefit production runs? The PKD composition of the WDN10 grade provides high wear resistance, which typically extends insert life and reduces tooling changes during long production runs. Can this insert be used for steel or stainless steel? This insert is intended for abrasive non‑ferrous machining; it is not optimised for general steel or rostfreier Stahl applications—consult the product matrix for recommendations. What role does the chipformer play? The 3F500N25FS-M1 chipformer shapes chip flow to promote stable breaking and evacuation, improving surface finish and preventing chip entanglement. Is test machining recommended before series production? Yes, test machining under representative conditions is recommended to verify cutting data and confirm the expected tool life and surface quality with the GX24-3F500N25FS-M1 WDN10. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Mark names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands; the offered article is an original, factory‑new product of the respective manufacturer.
GX24-3F500N25TM-1 WBH20 WBH20 Wendeplatten - Walter Tools
Take advantage of the CBN-grade WBH20 for consistent wear resistance and the proven 3F500N25TM-1 chipbreaker for controlled chips in hard turning operations; order through Metav Werkzeuge or consult our specialists for process optimisation. GX24-3F500N25TM-1 WBH20 – Indexable turning insert, CBN grade for hardened steels (Walter Tools) A GX24-3F500N25TM-1 WBH20 indexable turning insert developed for hard machining applications, offering high wear resistance and reliable chip control in the turning of hardened and pre-hardened steels CBN grade WBH20 for hard material machining High wear resistance for extended tool life Stable chip control in hard turning Designed for pre-hardened and hardened steels Consistent performance for hard machining The insert’s CBN cutting material, identified by the WBH20 grade, is tailored for the demands of hardened steels and similar hard materials. CBN is a superabrasive that combines exceptional wear resistance with thermal stability, enabling longer tool life under the high contact stresses of hard turning. This results in fewer index changes, less unplanned downtime and more predictable process cycles. As a consequence, machining operations benefit from improved uptime and a more efficient production flow. Controlled chips and improved surface quality Equipped with the 3F500N25TM-1 chipbreaker, this solution provides consistent chip control during interrupted or continuous hard-turning cuts. Stable chips reduce the risk of re-cutting and protect the component surface, contributing to a better surface finish and lower scrap rates. The combination of a robust cutting edge and a dedicated chipformer supports secure chip evacuation even at the elevated cutting forces associated with hard materials. Process advantages and application scope The insert is specified for the ISO material group H and is suitable for machining pre-hardened steel as well as hardened alloys where CBN excels. The use of this grade supports higher cutting speeds and improved dimensional stability in serial production. From a cost-efficiency perspective, the longer wear intervals and consistent performance can reduce total machining cost per part, while also enabling tighter tolerances without frequent tool changes. Practical integration into production systems As an indexable insert designed for standard turning toolholders, this item integrates smoothly into existing tool systems and replacement routines. Its predictable wear behaviour simplifies tooling strategies and inventory planning. Combined with professional process assessment from Metav Werkzeuge, the insert can be implemented with setup guidance and cutting-parameter recommendations to maximise tool life and maintain steady production flow. Discuss Walter Tools CBN inserts with Metav Werkzeuge for tailored hard-turning solutions and process optimisation; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for detailed advice Technical data SKU: GX24-3F500N25TM-1-WBH20-WALTER Article designation: GX24-3F500N25TM-1 WBH20 Product type: Indexable turning insert Series: Walter CBN / Hartstoff Chipbreaker: 3F500N25TM-1 Grade: WBH20 Manufacturer: Walter Tools Facts Material class: H (hardened steels) ISO group: H (per ISO 513) Numerical specifications: none provided Special features CBN cutting material Suitable for hardened and pre-hardened steels Stable cutting edge for hard turning Designed for improved chip control Intended for precision hard machining FAQ What materials is this insert intended for? The GX24-3F500N25TM-1 WBH20 insert is intended primarily for hardened steels and pre-hardened materials, reflecting the CBN-based WBH20 grade suitable for ISO group H. How does the WBH20 grade improve tool life? The WBH20 CBN grade combines high wear resistance and thermal stability, which reduces flank and crater wear and extends the interval between index changes. What benefit does the 3F500N25TM-1 chipbreaker provide? The 3F500N25TM-1 chipbreaker ensures controlled chip formation during hard turning, improving chip evacuation and contributing to a consistent surface finish. Is this insert compatible with standard turning toolholders? Yes, the insert is an indexable turning insert designed for common toolholder systems; toolholder compatibility should be confirmed against the insert geometry and clamping system. Can this insert be used for interrupted cuts or grooving in hardened materials? The CBN composition and the chipbreaker geometry make the insert suitable for many interrupted and continuous hard-turning applications; specific conditions should be validated in trial cuts. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany Walter AG (brand appearance: Walter Tools), with headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory-new product of the manufacturer.
GX24-4E600N03-CE4 WKP23S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating and the WKP23S carbide grade for stable chip formation and extended tool life; this insert delivers consistent surface quality and reduced downtime. Order the GX24-4E600N03-CE4 WKP23S insert directly via Metav Werkzeuge or request tailored machining advice from our consultants. GX24-4E600N03-CE4 WKP23S — Turning indexable insert with Tiger‑tec Silver coating by Walter Tools A GX24-4E600N03-CE4 WKP23S turning indexable insert designed for productive machining of steel and cast iron in the Tiger‑tec Silver series. Tiger‑tec Silver coating for high process security WKP23S grade for stable chip formation Optimised 4E600N03‑CE4 chipbreaker geometry Suited to steel (P) and cast iron (K) machining Consistent cutting performance for productive turning The combination of the Tiger‑tec Silver surface treatment and a WKP23S coated carbide substrate ensures process reliability under typical turning conditions. The coating reduces flank and crater wear, which translates into longer tool life and fewer indexings. For operations on unalloyed and alloyed steel grades the grade chemistry and coating behaviour promote stable thermal characteristics and predictable wear patterns, resulting in consistent part tolerances and surface finish. This measurable stability supports continuous production runs and fewer interruptions for tool changes. Better chip control reduces rework and risk An optimised chipbreaker is essential for controlled material removal; the 4E600N03‑CE4 geometry is developed to generate short, manageable chips when machining both steel and cast iron. Improved chip control reduces the likelihood of workpiece damage, tool edge interference and machine stoppages, thereby lowering scrap rates. In practical terms, fewer disturbed cycles and less manual intervention mean the machining process becomes more economical and predictable — a clear rational advantage for batch and serial production. Broad material coverage and application focus Conceived for ISO material groups P and K, this insert supports a wide range of turning tasks from finishing to medium‑depth roughing on steel and cast iron, in line with ISO 513 designations. The coated carbide composition balances abrasion resistance and toughness so that both abrasive cast iron and thermally demanding steel operations can be handled without frequent tool swaps. The result is improved overall equipment effectiveness and a favourable return on tool consumption, particularly in mixed‑material shops where versatility is valued. Easy integration with existing turning toolholders The ISO designation GX24‑4E600N03‑CE4 and the full specification of the grade ensure straightforward selection of compatible holders and clamping solutions. The GX24-4E600N03-CE4 WKP23S insert fits standard turning assemblies that accept the GX24 geometry and benefits from Walter Tools’ focus on dimensional accuracy and repeatability. This compatibility simplifies inventory management and reduces set‑up time on the shop floor, helping to keep cycle times tight and quality consistent across batches. For machining operations where stable chip formation and long tool life are priorities, contact Metav Werkzeuge for application recommendations and availability of Walter Tools Tiger‑tec Silver inserts. Technical data Article number: GX24-4E600N03-CE4-WKP23S-WALTER Designation: GX24-4E600N03-CE4 WKP23S Product type: Turning indexable insert Series: Tiger‑tec Silver Grade: WKP23S Chipbreaker: 4E600N03‑CE4 Material suitability: P / K (steel / cast iron) Manufacturer: Walter Tools Core data No numeric core data provided in source Special features Coated carbide (coated cemented carbide) Optimised chip control geometry Suitable for ISO P and K material groups Consistent wear behaviour and surface quality ISO designation for standardised holder compatibility FAQ What materials is this insert suitable for? The insert is designed for machining steel and cast iron (ISO groups P and K); the WKP23S grade and Tiger‑tec Silver coating provide the appropriate wear resistance and toughness for these materials. How does the 4E600N03‑CE4 chipbreaker improve machining? The 4E600N03‑CE4 chipbreaker is optimised for short, controlled chips, improving chip control, reducing the risk of workpiece damage and lowering intervention during turning operations. Is this insert compatible with standard GX24 holders? Yes, the ISO designation GX24 indicates compatibility with holders that accept GX24 geometries; the insert is produced to standard tolerances for straightforward integration. What benefits does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating reduces flank and crater wear, enhancing process reliability and extending tool life, which supports longer production runs with consistent surface quality. Can this insert be used for finishing and roughing? The coated carbide composition and chipbreaker design allow use across finishing to medium roughing tasks in steel and cast iron, offering versatility for mixed‑operation shops. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanatory purposes only and does not indicate any affiliation with our company. The offered item is an original, factory‑new product from the manufacturer.
GX24-4E600N05-GD3 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of high productivity, stable cutting-edge performance and optimised chip control for reliable turning of steel and cast iron; order the insert directly via Metav Werkzeuge or request advice from our consultants. GX24-4E600N05-GD3 WKP23S turning insert — Tiger·tec Silver, coated carbide, for steel and cast iron (Walter Tools) GX24-4E600N05-GD3 WKP23S is a single-sided turning insert designed for productive turning operations on steel and cast iron in industrial machining environments Tiger·tec Silver coating for longer tool life Optimised chip former 4E600N05-GD3 Suitable for ISO groups P and K Walter Tools stable cutting-edge performance Boosted productivity through coating and material design The combination of the Tiger·tec Silver technology with a coated carbide grade provides measurable advantages in throughput and tool life. The coating reduces flank and crater wear, which translates into fewer indexings and longer production runs; this effect improves machine uptime and reduces non-productive handling. For process planners and production engineers, the result is a more consistent cycle time and a lower cost-per-part without sacrificing surface quality. The construction benefits shops that require repeatable performance across mixed batches of components. Reliable chip control and improved surface quality The integrated chip former 4E600N05-GD3 is designed to control breaking behaviour on short and medium chips typical for steel and cast iron. Good chip control reduces the risk of rework and machine interruptions, yielding a cleaner work environment and more predictable post-process handling. The insert’s geometry supports stable cutting forces, which helps maintain part tolerances and contributes to an improved workpiece finish. The designation of ISO P/K underlines its suitability for common steel and cast-iron machining tasks and clarifies the intended processing window for programming and tooling selection. Practical application guidance and process confidence The insert is suitable for a wide range of turning tasks where stable cutting-edge performance and efficient material removal are priorities. Its wear characteristics and robust edge preparation provide confidence when machining medium-complexity geometries, where repeatable results are required shift after shift. For planners seeking a balance between productivity and tool life, this grade offers a pragmatic solution: fewer tool changes, consistent component quality and compatibility with standard toolholders for turning operations. The Walter Tools heritage supports predictable tool behaviour and straightforward grade selection for everyday workshop use. Discuss the GX24-4E600N05-GD3 WKP23S with Metav Werkzeuge to ensure optimal grade selection and process parameters for specific steel and cast iron applications Technical data Article number: GX24-4E600N05-GD3-WKP23S-WALTER Label: Drehwendeschneidplatte GX24-4E600N05-GD3 WKP23S Walter Tools SKU: GX24-4E600N05-GD3-WKP23S-WALTER Product type: Drehwendeschneidplatte Grade: WKP23S Series: Tiger·tec Silver Chip former: 4E600N05-GD3 Material group: P / K Manufacturer: Walter Tools Core technical characteristics ISO material groups: P, K Suitable materials: steel, cast iron Coating technology: Tiger·tec Silver Geometry reference: GX24-4E600N05-GD3 Design features and functions Coated carbide grade for wear resistance Optimised chip-forming geometry Stable cutting edge for repeatable performance Intended for turning operations in industrial production FAQ What applications is this insert best suited for? The GX24-4E600N05-GD3 WKP23S insert by Walter Tools is designed primarily for turning operations on steel and cast iron, aligned with ISO groups P and K for general steel and cast-iron machining. How does the Tiger·tec Silver technology benefit machining? Tiger·tec Silver provides enhanced wear resistance and thermal stability for the coated carbide grade, improving tool life and process consistency when using the GX24-4E600N05-GD3 WKP23S insert. Does the insert control chip formation effectively? Yes, the 4E600N05-GD3 chip former is engineered to produce short, manageable chips on steel and cast iron, reducing interruptions and improving surface quality for parts machined with the GX24-4E600N05-GD3 WKP23S. Is this insert suitable for high-volume production? The combination of the Walter Tools grade WKP23S and the Tiger·tec Silver coating makes the insert well suited to production environments that demand stable cutting-edge performance and extended tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only. There is no affiliation between our company and the referenced brands. The offered article is an original, factory-new product of the manufacturer.
GX24-4E600N05-GD3 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM33S grade for secure chip formation and improved edge stability when machining stainless steels and heat‑resistant superalloys; order genuine inserts via Metav Werkzeuge or contact the sales team for application advice. GX24-4E600N05-GD3 WSM33S indexable insert — coated grade for stainless steels and superalloys | Walter Tools The GX24-4E600N05-GD3 WSM33S is a coated turning insert designed for demanding applications in stainless steels and heat‑resistant superalloys, offering stable cutting performance and reliable chip control for productive turning operations Tiger‑tec Silver coating for edge stability WSM33S grade for stainless and superalloys 4E600N05‑GD3 chipbreaker for controlled chips Coated carbide for extended tool life Consistent performance in demanding materials The combination of Tiger‑tec Silver surface engineering and the WSM33S coated‑carbide grade delivers edge stability and thermal resistance that are essential when turning stainless steels (ISO group M) and superalloys (ISO group S). This indexable insert is configured to handle the adhesive tendencies and heat generation typical of these materials; the coating reduces friction and supports secure chip formation, which in turn lowers the risk of built‑up edge and unscheduled tool changes. The result is a more predictable process and higher net productivity for batch and continuous production environments. Better chip control and productivity through optimised geometry The integrated chipbreaker 4E600N05‑GD3 is engineered to promote short, manageable chips and uniform cutting forces. Controlled chip formation reduces rework and machine downtime while supporting higher material removal rates where process windows allow. Because the insert is a coated carbide grade developed for poor heat conduction substrates, wear mechanisms are mitigated and edge life is improved; this leads to fewer interventions at the tool post and steadier cycle times, supporting cost‑effective machining without compromising surface quality. Integration and application support for secure implementation Designed for standard turning toolholders, the insert integrates seamlessly into existing turning tool chains and is suitable for workpieces where stainless steels or heat‑resistant superalloys are encountered. Technical data and compatibility notes are available to aid process planning; where geometry selection or cutting‑parameter advice is needed, Metav Werkzeuge can provide application guidance to ensure the correct insert variant and holder pairing are chosen. The combination of an established coated grade and a purpose‑built chipbreaker gives operators confidence in repeatable performance and process security. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools Tiger‑tec Silver inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and supply details Technical Data Article number: GX24-4E600N05-GD3-WSM33S-WALTER Description: GX24-4E600N05-GD3 WSM33S indexable turning insert Manufacturer: Walter Tools Core data ISO workpiece groups: M, S Chipbreaker type: 4E600N05‑GD3 Grade/series: WSM33S / Tiger‑tec Silver Special features Coated carbide grade for thermal stability Suited to stainless steels (ISO M) Suited to heat‑resistant superalloys and titanium (ISO S) Designed for controlled chip formation and process security FAQ What materials is this insert intended for? The GX24-4E600N05-GD3 WSM33S insert is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). What series and grade does this insert belong to? This indexable insert uses the Tiger‑tec Silver series and the WSM33S coated‑carbide grade for enhanced edge stability. Which chipbreaker is fitted to this insert? The insert is supplied with the 4E600N05‑GD3 chipbreaker, developed to produce controlled, short chips for safer turning operations. How does the coating influence tool life? The Tiger‑tec Silver coating reduces friction and improves thermal resistance, helping the insert maintain a stable cutting edge and supporting longer tool life under the stresses typical of ISO M and S materials. Can the insert be used in standard turning holders? Yes, the GX24-4E600N05-GD3 WSM33S is intended for typical turning toolholder interfaces; Metav Werkzeuge can advise on holder pairing and geometry for specific applications. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
GX24-4E600N05-GD6 WSM23S WSM23S Wendeplatten - Walter Tools
Die Kombination aus der WSM23S-Sorte und dem Tiger‑tec Silver‑Coating ermöglicht eine wirtschaftliche Zerspanung hart zu bearbeitender Werkstoffe bei gleichzeitig stabiler Schneidkante und sicherer Spanbildung; die optimierte Spanformer‑Geometrie 4E600N05‑GD6 sorgt für kontrollierten Spanfluss. Bestellungen und technische Beratung sind über Metav Werkzeuge erhältlich – bei Bedarf gern die Fachberater kontaktieren. GX24-4E600N05-GD6 WSM23S indexable turning insert, Tiger‑tec Silver (Walter Tools) The GX24-4E600N05-GD6 WSM23S is an indexable turning insert engineered for high‑performance machining of stainless steel and heat‑resistant superalloys. Coated carbide with Tiger‑tec Silver performance Optimised chipformer 4E600N05‑GD6 Designed for stainless steel and superalloys Stable cutting edge for longer tool life Improved process reliability through advanced coating and grade The combination of the Tiger‑tec Silver series and the WSM23S coated carbide grade delivers enhanced wear resistance and thermal stability for challenging turning operations. The advanced coating reduces friction at the cutting edge and helps prevent built‑up edge, which is a common problem when machining austenitic stainless steels. As a result, the insert supports consistent tool life and predictable component quality, reducing unplanned downtime and contributing to a more efficient production rhythm. Consistent chip control and safer machining of hard materials Equipped with the chipformer 4E600N05‑GD6, this insert offers optimised chip breaking for materials categorised as M (stainless steel) and S (heat‑resistant superalloys and titanium) according to ISO 513. Good chip control minimises the risk of entanglement and improves surface finish by keeping chips compact and easy to evacuate. For shops processing tough alloys, the geometry delivers a reliable compromise between shear strength and chip fragmentation, translating to fewer interruptions and smoother machining cycles. Longer uptime and straightforward tool management The insert’s stable cutting edge and the protective coating reduce flank and crater wear, extending the usable life of the tool and lowering tool consumption over multiple parts. Thanks to the indexable format, worn cutting corners can be rotated quickly, restoring cutting performance without tool changeovers or complex regrinding. This simplicity supports lean tool handling and faster setup times across production shifts, making the component an economical choice for repetitive turning tasks. Choose Walter Tools’ Tiger‑tec Silver grade for reliable machining of stainless steels and superalloys; contact Metav Werkzeuge for tailored tool recommendations and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: GX24-4E600N05-GD6-WSM23S-WALTER Label: Drehwendeschneidplatte GX24-4E600N05-GD6 WSM23S Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Grade: WSM23S Series: Tiger‑tec Silver Chipformer: 4E600N05‑GD6 Material code: S / M ISO designation: GX24-4E600N05-GD6 WSM23S UID: GX24-4E600N05-GD6-WSM23S-WALTER Facts ISO material groups: M (stainless steel), S (superalloys/titanium) Coating: coated carbide (Tiger‑tec Silver technology) Application focus: hard‑to‑machine materials and stainless steels Indexable format: multiple cutting edges per insert Special features Optimised chip control geometry Enhanced thermal stability for tough alloys Designed for stable cutting edge and reduced built‑up edge Suitable for high process reliability operations FAQ What materials is the insert suitable for? The GX24-4E600N05-GD6 WSM23S insert is suitable for stainless steels (M) and heat‑resistant superalloys/titanium (S) according to its grade and Tiger‑tec Silver coating. How does the chipformer 4E600N05‑GD6 help in production? The 4E600N05‑GD6 chipformer provides controlled chip breaking and compact chips, improving evacuation and reducing the risk of chip entanglement during continuous turning operations. Is the WSM23S grade coated, and what is the benefit? Yes, WSM23S is a coated carbide grade within the Tiger‑tec Silver family; the coating increases wear resistance and thermal stability, which supports longer tool life under demanding conditions. Can the insert be rotated to restore cutting performance? The indexable design allows corners to be indexed, restoring cutting geometry quickly and reducing downtime for tool changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Brand names and protected trademarks such as Walter Tools are mentioned solely for explanatory purposes. Protected trademarks and trade names remain the property of their respective owners. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
GX24-4E600N05-GD6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the wear‑resistant WSM33S grade for stable edge life and reliable chip control in demanding materials; order directly via Metav Werkzeuge or consult our specialists for process optimisation. GX24-4E600N05-GD6 WSM33S indexable turning insert — Tiger‑tec Silver, Walter Tools A GX24-4E600N05-GD6 WSM33S indexable turning insert designed for machining stainless steels and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver coating grade WSM33S Optimised for stainless steel and super‑alloys Stable cutting edge at elevated temperatures Consistent performance in stainless steels and superalloys The combination of the WSM33S carbide grade with Tiger‑tec Silver coating delivers a balance of thermal resistance and edge toughness that suits stainless steel and superalloys. The cutting material resists adhesive wear and built‑up edge, which means fewer interruptions for edge dressings or insert changes. This stability supports a predictable tool life, helping to reduce machining variance and improving throughput in serial production. The insert geometry and coated surface also contribute to reliable contact conditions between workpiece and tool, reducing the risk of unexpected process downtime. Predictable chip control for smoother production Equipped with the 4E600N05‑GD6 chipbreaker, this insert promotes consistent chip formation under varied cutting parameters. Controlled chips lower the chance of surface damage and minimise secondary operations for chip removal. The chip control design works together with the coated carbide to evacuate heat and direct chips away from the cutting zone, which aids operator safety and machine cleanliness. In practice, this translates into more stable cycle times and fewer manual interventions on the workfloor. How the coating and grade support machining goals A coated carbide like Tiger‑tec Silver enhances wear resistance without sacrificing toughness, while the WSM33S composition is tailored to maintain a sharp, stable cutting edge under thermal load. For machinists new to these materials, the ISO groups M and S indicate suitability for stainless steels (M) and heat‑resistant superalloys and titanium (S). The result is improved surface finish and repeatability when finishing or medium‑duty turning, provided machining parameters are matched to the workpiece and holder set‑up. This makes the insert a practical choice for operations seeking consistent quality with manageable tooling costs. Selection and process advice for reliable results When integrating this insert into an existing toolset, focus on matching the seat and clamping system to the insert designation and select cutting data that controls temperature build‑up—moderate cutting speeds and appropriate feeds for the grade achieve the best compromise between tool life and productivity. The insert’s design supports a range of turning applications; pairing with suitable coolant strategies or optimised dry cutting parameters can further extend service intervals. For tailored recommendations, process trials under real‑world conditions are advised to validate feed, speed and depth of cut for specific alloys. For procurement or technical guidance on Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for expert selection and local support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: GX24-4E600N05-GD6-WSM33S-WALTER Name: GX24-4E600N05-GD6 WSM33S Product type: indexable turning insert Series: Tiger‑tec Silver Grade: WSM33S Chipbreaker: 4E600N05‑GD6 Manufacturer: Walter Tools Applicable material groups: M, S Facts Suitable for: stainless steels (M) Suitable for: heat‑resistant superalloys and titanium (S) Coating type: Tiger‑tec Silver Material type: coated carbide Special features Stable cutting edge under thermal load Optimised chip control geometry Designed for reliable production performance Suitable for finishing and medium‑duty turning operations Series focus: productivity and broad material coverage FAQ What materials is this insert suitable for? The GX24-4E600N05-GD6 WSM33S insert is suited to stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where thermal resistance and edge stability are required. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating increases wear resistance and thermal stability, which for the WSM33S grade means longer periods between index changes and steadier surface quality in continuous machining. Is the chipbreaker suitable for automated turning cells? Yes, the 4E600N05‑GD6 chipbreaker promotes predictable chip formation, making it appropriate for automated cells where consistent chip evacuation and machine uptime are priorities. Where can one get cutting data recommendations for this insert? Metav Werkzeuge provides process advice and cutting data for the GX24-4E600N05-GD6 WSM33S; trials under actual conditions are recommended to fine‑tune speeds and feeds for specific alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-4E600N05-UA4 WKP13S WKP13S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP13S carbide grade for extended tool life and predictable chip control when machining steel and cast iron; order or request application advice via Metav Werkzeuge for a smooth production setup. GX24-4E600N05-UA4 WKP13S turning indexable insert — Walter Tools, Tiger‑tec Silver, for steel and cast iron GX24-4E600N05-UA4 WKP13S is a precision turning insert designed for productive machining of steels and cast iron, combining a wear‑resistant coating with a chipformer optimised for stable chip control. Tiger‑tec Silver coating for longer tool life Optimised chipformer for stable chip control Designed for steel and cast iron machining Consistent edge stability under heavy loads Faster cycle times thanks to advanced coating and grade The combination of Tiger‑tec Silver surface technology and the WKP13S carbide grade delivers a measurable uplift in process performance. The coating reduces abrasive and adhesive wear, so the insert maintains cutting geometry for longer periods; the result is higher material removal rates and reduced downtime for tool changes. This technical pairing is particularly effective in demanding turning operations, where repeatable edge condition translates into consistent part quality and lower cost per component. Reliable chip control and machining stability The integrated chipformer 4E600N05‑UA4 is engineered to produce predictable, breakable chips across a range of turning tasks. Optimised chip evacuation reduces the risk of surface damage and tool interference, which supports uninterrupted cycle sequences and less scrap. Built for robustness, the insert offers edge stability under variable cutting forces, helping to maintain dimensional accuracy and surface finish without frequent regrinding or premature replacement. Clear application range and compatibility with ISO groups This turning insert is specified for material groups steel (P) and cast iron (K) per ISO classification, reflecting its suitability for both unalloyed/low‑alloy steels and abrasive cast materials. The geometry and grade are selected to address the thermal and mechanical demands typical of these groups, offering balanced wear resistance and toughness. When selecting toolholders, ensure compatibility with the GX24 insert family and verify clamping stability to exploit the insert’s performance fully. Economical machining through extended life and repeatable results By reducing tool change frequency and improving first‑pass yields, the insert contributes directly to lower process costs. Improved wear behaviour means less monitoring and fewer unplanned stops, supporting continuous production targets. The consistent performance of the grade and chipformer also simplifies tooling logistics and standardisation across batches, aiding planning and inventory management in production environments. Request a cutting‑data consultation or procurement through Metav Werkzeuge for Walter Tools Tiger‑tec Silver inserts to secure optimal tool selection and process parameters for the intended application. Technical data SKU: GX24-4E600N05-UA4-WKP13S-WALTER Product: turning indexable insert Series: Tiger‑tec Silver Grade: WKP13S Designation: GX24-4E600N05-UA4 ISO designation: GX24-4E600N05-UA4 WKP13S Chipformer: 4E600N05‑UA4 Material groups: P / K Manufacturer: Walter Tools Facts No numerical data provided in the specification Special features Coating technology: Tiger·tec Silver Carbide grade: WKP13S Chipformer geometry: 4E600N05‑UA4 Suitable for: steel (P) and cast iron (K) Product type: turning indexable insert FAQ What materials can this insert machine effectively? The GX24‑4E600N05‑UA4 WKP13S insert is optimised for ISO groups P and K, meaning it is effective for a wide range of steels and cast irons when used with appropriate cutting data. What benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver improves wear resistance and thermal stability of the cutting edge, helping the WKP13S grade retain geometry longer and deliver more consistent surface quality over extended tool life. How does the chipformer 4E600N05‑UA4 affect machining? The 4E600N05‑UA4 chipformer promotes controlled chip breaking and evacuation, reducing entanglement and supporting uninterrupted turning cycles, particularly in interrupted cuts and heavy cross‑sections. Is this insert suitable for finishing and roughing operations? The carbide grade and geometry offer a balance between toughness and wear resistance; with matching feeds and speeds the insert can be applied to both roughing and finishing tasks, depending on the specific workpiece and toolholder configuration. Which designation should be checked before replacing an insert? Confirm the GX24‑4E600N05‑UA4 WKP13S ISO designation and the chipformer code to ensure compatibility with the intended toolholder and clamping system. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com