LCMX06T204-B57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated B57 chipbreaker and precise geometry for reliable drilling and reaming of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. LCMX06T204-B57 WKP35S drilling/reaming indexable insert by Walter Tools — Tiger·tec Silver, B57 chipbreaker The LCMX06T204-B57 WKP35S is a rectangular indexable insert designed for drilling and reaming applications in steel and cast iron, combining a coated carbide grade and a geometry optimised for stable chip formation. Tiger·tec Silver coated carbide for long life Optimised B57 chipbreaker for P and K materials Rectangle form with 0.4 mm corner radius 7° relief angle for secure cutting action Higher throughput and longer service life with Tiger·tec Silver The Tiger·tec Silver coating, combined with the WKP35S coated-carbide grade, is engineered to reduce wear under the thermal and mechanical loads typical in steel and cast-iron machining. This results in extended tool life and fewer index changes during production runs, which raises overall throughput. Coated carbide means a hard, wear-resistant surface over a tough substrate; the coating reduces adhesion and abrasive wear while the substrate absorbs shock, delivering a practical balance for industrial environments. Controlled chip formation for predictable machining The B57 chipbreaker is tailored to the chip characteristics of ISO groups P (steel) and K (cast iron). By breaking chips into short, manageable segments, the geometry lowers the risk of chip entanglement and improves evacuation from the hole, which supports stable cutting forces and consistent hole quality. For operations where repeatability matters, this chip control delivers tangible process reliability and reduces secondary operations like chip cleaning. Geometry optimised for precision holes and secure indexation The insert’s rectangle form, 0.4 mm corner radius and 7° relief angle combine to give a balanced mix of cutting strength and entry behaviour. The small corner radius supports accurate hole starts and contributes to a consistent surface finish, while the relief angle reduces rubbing and heat generation. The designation indicates a standard industrial format that fits common indexable toolholders, enabling straightforward integration into existing tool systems without extensive adaptation. Built for industrial workflows and application clarity Tolerance class M, size 06 and thickness T2 mean the component adheres to predictable dimensional standards for stability in automated tooling systems. The insert is explicitly specified for steel and cast iron applications under the ISO classification P and K, so process planners can align cutting parameters and tool-change intervals with expected material behaviour. For tailored advice on machining parameters or to verify suitability for a specific component geometry, the Metav Werkzeuge team can provide application-oriented guidance and documentation. For robust drilling and reaming performance in steel and cast iron applications, request a supply and process consultation from Metav Werkzeuge — contact the technical team at info@metav-werkzeuge.com or +49 2822 7131930 to determine optimal integration and ordering details. Technical data Article number: LCMX06T204-B57-WKP35S-WALTER Product: Drilling/reaming indexable insert Designation: LCMX06T204-B57 WKP35S Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 06 Thickness: T2 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: B57 Applicable materials: Steel (ISO P), Cast iron (ISO K) Plate form: Rectangle Execution: X FAQ What materials is this insert intended for? The LCMX06T204-B57 WKP35S is specified for machining steel (ISO P) and cast iron (ISO K); these material groups are the primary intended applications for the WKP35S grade. Is the insert coated and what are the benefits? Yes, the WKP35S grade belongs to the Tiger·tec Silver coating technology; this provides enhanced wear resistance and thermal stability, improving tool life under typical drilling and reaming loads. What does the B57 chipbreaker achieve in practice? The B57 chipbreaker promotes short, controllable chips in P and K materials, aiding chip evacuation and contributing to stable cutting forces and consistent hole quality. How does the insert geometry affect hole accuracy? Features such as the 0.4 mm corner radius and 7° relief angle balance cutting edge strength with entry behaviour, helping to produce precise hole starts and reliable surface finish without excessive rubbing. Can the insert be used for stainless steel? A suitability specification for stainless steel (rostfreier Stahl) is not provided for this grade; therefore, machining stainless steel with this insert is not documented in the supplied data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. The Walter AG (marketed as Walter Tools) is part of the Sandvik Group and is recognised as a leading manufacturer of precision cutting tools.
LCMX06T204-B57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold coating and the versatile WSP45G grade to achieve consistent edge life and dependable chip control across steel, stainless steel and superalloy applications; order directly via Metav Werkzeuge or consult the technical team for optimisation assistance. LCMX06T204-B57 WSP45G — Drilling/Boring Indexable Insert by Walter Tools (Tiger‑tec Gold, chipbreaker B57) The LCMX06T204-B57 WSP45G is a rectangular drilling and boring indexable insert designed for demanding turning and reaming operations in steels, stainless steels and heat‑resistant superalloys. Tiger‑tec Gold PVD coating for robust edges Grade WSP45G for versatile steel and superalloys Rectangular 06 insert with 0.4 mm corner radius 7° relief angle for stable cutting performance Longer tool life through optimised coating and grade The combination of the Tiger‑tec Gold surface treatment and the WSP45G grade delivers a PVD‑coated carbide that emphasises stable cutting edges and predictable wear behaviour. This coating technology reduces flank wear and supports consistent performance during interrupted and continuous cuts, which results in longer tool life and fewer index changes. For mixed‑material batches — including steel, stainless steel and superalloys — this formulation balances thermal resistance and edge toughness to maintain process reliability and minimise unplanned downtime. Geometry that improves surface quality and repeatability Careful geometrical design, including a 0.4 mm corner radius and a 7° relief angle, provides controlled chip formation and reduced vibration during bore enlargement. The chipbreaker B57 is configured to produce short, manageable chips under typical drilling and boring conditions, improving evacuation and reducing the risk of recutting. The rectangular format and size 06 form factor ensure stable clamping in compatible toolholders, contributing to repeatable part accuracy and improved surface finish on the bore wall. Practical efficiency and integration in production Specified for general and specialised machining tasks, the insert supports high‑mix production by offering consistent results across a range of workpiece materials. The P/M/S material compatibility simplifies tooling decisions for shops that process both conventional steels and demanding high‑temperature alloys. Using this grade and geometry can lower tooling change frequency and support higher spindle utilisation, delivering measurable productivity improvements and a favourable cost‑per‑part ratio over time. For application advice or to specify suitable holders and cutting parameters for Tiger‑tec Gold inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — the technical team will recommend the optimal setup for the intended machining task. Technical Data Article number: LCMX06T204-B57-WSP45G-WALTER Item designation: LCMX06T204-B57 WSP45G Brand: Walter Tools Product type: Drilling/Boring indexable insert Series: Tiger‑tec Gold Grade: WSP45G Core Data Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Insert shape: Rectangular Chipbreaker: B57 Thickness: T2 Tolerance class: M Designation without grade: LCMX06T204-B57 Materials & Special Features Coated carbide (PVD) material Suited for steel (P), stainless steel (M), superalloys/titanium (S) Stable cutting edge and good chip control Suitable for drilling and boring applications Execution: X FAQ What materials can this insert machine effectively? The LCMX06T204-B57 WSP45G insert is specified for steel, stainless steel and superalloys/titanium, reflecting the P/M/S compatibility of the WSP45G grade and its PVD coating. Is the chipbreaker suitable for interrupted cuts during bore enlargement? Yes, the chipbreaker B57 on this insert is designed to manage chip formation and evacuation, making it suitable for many interrupted cutting scenarios encountered in drilling and boring. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm corner radius provides a compromise between edge strength and surface finish: it increases resistance to chipping while maintaining the ability to produce a consistent bore wall finish. Can this insert be used in high‑temperature alloys such as Inconel? The WSP45G grade is formulated to handle heat‑resistant superalloys; for sustained high‑temperature work, the insert’s Tiger‑tec Gold PVD coating helps preserve edge integrity under thermal load. Which series and brand manufacture this insert? This item belongs to the Tiger‑tec Gold series and is supplied by Walter Tools as the LCMX06T204-B57 WSP45G indexable insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LCMX06T204-B57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of precise cutting geometry, a robust WXP40 uncoated carbide grade and reliable chip control B57 to maintain steady drilling and boring cycles. Order the insert directly via Metav Werkzeuge or ask the consultants for assistance with selection and availability. LCMX06T204-B57 WXP40 — Drilling/boring indexable insert, uncoated carbide, 0.4 mm corner radius (Walter Tools) The LCMX06T204-B57 WXP40 is an indexable insert designed for drilling and boring tasks where consistent chip formation and stable cutting edges are required in industrial machining environments. Uncoated carbide grade WXP40 Rectangular insert, size 06 7° relief angle for stable cutting 0.4 mm corner radius for edge strength Increased process reliability through defined geometry The insert combines a 7° relief angle with a 0.4 mm corner radius, creating a geometry that promotes stable cutting forces and predictable engagement with the workpiece. The chipbreaker B57 is engineered to control chip flow during drilling and boring, reducing the risk of built-up edge and helping to keep cycle times consistent. Tolerance class M and the rectangular form ensure repeatable seating in standard tool holders, which supports reproducible machining results and simpler tool management. Durable uncoated carbide for broad applications Made from an uncoated carbide grade (WXP40), the insert offers a balance between toughness and wear resistance suitable for many general-purpose applications; the specific workpiece suitability should be verified against the product matrix. The nominal T2 thickness and the size 06 designation support rigidity in the cutting zone, while the 0.4 mm corner radius increases edge strength and reduces edge chipping in interrupted or heavier cuts. These properties help to extend tool life under varying conditions without relying on surface coatings. Practical integration and handling guidance The rectangular design and clear ISO-style designation facilitate rapid identification and replacement in established tool systems. For safe and efficient use, ensure correct clamping and seat cleanliness to preserve the tolerance class M fit. Because this insert is uncoated, adjustments to cutting speeds and feeds may be required depending on material and machine dynamics; consult the technical product matrix for recommended parameters. For customers seeking reliable supply and advice on optimisation, Metav Werkzeuge provides additional selection support and can advise on matching holders and drill systems. For machining partners seeking reliable uncoated cutting performance and stable chip control, contact Metav Werkzeuge for expert advice and stock information: eMail info@metav-werkzeuge.com — Tel +49 2822 7131930. Technical data SKU: LCMX06T204-B57-WXP40-WALTER Article designation: LCMX06T204-B57 WXP40 Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core figures Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: T2 Tolerance class: M Design & special features Plate form: Rectangular Chipbreaker: B57 Carbide grade: WXP40 (uncoated) Material reference: Catalogue dependent FAQ What materials is this insert suitable for? The LCMX06T204-B57 WXP40 insert from Walter Tools is supplied in an uncoated carbide grade; material suitability should be checked against the product matrix for the exact application and workpiece material. How does the chipbreaker B57 influence performance? The B57 chipbreaker on this rectangular insert improves chip control during drilling and boring, helping to avoid entanglement and ensuring more consistent cutting forces with the LCMX06T204-B57 WXP40. What does tolerance class M mean for tool set-up? Tolerance class M indicates a medium tolerance that supports reproducible seating and straightforward clamping in compatible tool holders for drilling and boring operations. Is this insert coated? No, the WXP40 designation denotes an uncoated carbide grade; the insert relies on carbide properties rather than a surface coating for wear and toughness characteristics. Which geometric features increase edge security? The 0.4 mm corner radius and the defined relief angle contribute to a stronger cutting edge and improved resistance against chipping on the LCMX06T204-B57 WXP40. Walter AG (brand: Walter Tools), headquartered in Tübingen, Germany, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
LCMX06T204-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP25S grade combined with the optimised chipbreaker D57 for consistent chip control and longer tool life; order inserts or request application advice through Metav Werkzeuge for rapid supply and expert consultation. LCMX06T204-D57 WKP25S – Drilling / boring indexable insert for steel and cast iron | Walter Tools LCMX06T204-D57 WKP25S is a rectangular indexable insert designed for drilling and boring operations in steel and cast iron, offering a balanced combination of wear resistance and reliable chip control Tiger·tec Silver coating for improved wear resistance Optimised chipbreaker D57 for stable chip formation Suitable for steel (P) and cast iron (K) applications Corner radius 0.4 mm and 7° free angle for precise cutting Longer tool life through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP25S grade provides enhanced wear resistance and consistent performance under typical cutting temperatures encountered when machining steel and cast iron. Coated carbide reduces flank and crater wear, which translates into fewer tool changes and extended uninterrupted machining time. For process-oriented production, this means improved uptime and a clearer cost-per-part calculation compared with uncoated alternatives. The coating technology also supports higher cutting parameters where appropriate, helping to raise productivity without compromising component quality. Stable chip control and precise cutting geometry Built with an optimised chipbreaker D57 and a corner radius of 0.4 mm, the insert ensures controlled chip formation and predictable breakage patterns. The 7° free angle reduces rubbing and heat build-up at the cutting edge, resulting in cleaner surfaces and extended edge life. Rectangular geometry provides secure clamping and repeatable positioning in compatible toolholders, while the T2 thickness and M tolerance class maintain mechanical stability in drilling and boring cycles. These geometric details aid in achieving consistent hole quality and surface finish, particularly important in precision or batch machining. Practical application and handling in workshop environments Designed for common industrial use, the insert supports machining of unalloyed and alloyed steels (material group P) and abrasive cast irons (material group K). The LCMX06T204-D57 WKP25S insert is straightforward to integrate into existing tool systems that accept rectangular drilling/boring inserts and benefits production environments seeking predictable tool life and minimal set-up variation. For shops requiring fit-for-purpose solutions, the insert’s combination of coating, chip control and geometry delivers reliable cutting behaviour with lower scrap risk and steady component tolerances — an outcome that supports both small-batch flexibility and larger series production. For application-specific recommendations or to secure compatible inserts from Walter Tools, contact Metav Werkzeuge for immediate assistance and fast supply via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: LCMX06T204-D57-WKP25S-WALTER ISO designation: LCMX06T204-D57 WKP25S Manufacturer: Walter Tools Type: Bohr-/Aufbohrwendeschneidplatte Core data Free angle: 7° Corner radius: 0.4 mm Thickness: T2 Size: 06 Tolerance class: M Special features Grade: WKP25S Coating: Tiger·tec Silver Chipbreaker: D57 Form: Rectangular Material suitability: Steel (P) and Cast iron (K) Series: Tiger-tec Silver Execution: X FAQ What materials is this insert suitable for? The LCMX06T204-D57 WKP25S insert is designed for machining steel (P) and cast iron (K), matching the grade and coating to handle both the thermal loads of steels and the abrasive tendencies of cast materials. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WKP25S grade reduces wear and improves heat resistance, which extends edge life and allows for more consistent machining performance during longer runs. What benefit does chipbreaker D57 provide? The chipbreaker D57 promotes stable chip formation and reliable breakage, lowering the risk of chip-related disturbances and improving surface consistency in drilling and boring operations. Is the insert compatible with standard rectangular toolholders? Yes, the rectangular form and defined T2 thickness make the insert compatible with toolholders that accept this ISO-style geometry; correct clamping is essential for repeatable accuracy. What role does the corner radius play in hole quality? A corner radius of 0.4 mm provides a balance between edge strength and cutting precision, helping to achieve improved surface finish and reduced risk of edge chipping when used within recommended parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer.
LCMX06T204-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, precise geometry and controlled chip formation for steady production and reduced rework; order genuine Walter Tools inserts via Metav Werkzeuge or consult our technical team for application advice. LCMX06T204-D57 WKP35S drill/boring indexable insert, Tiger·tec Silver, for steel and cast iron — Walter Tools The LCMX06T204-D57 WKP35S is a rectangular drill/boring indexable insert engineered for reliable machining of steel and cast iron in production environments Tiger·tec Silver coating for extended tool life Suitable for steel and cast iron machining D57 chipbreaker for controlled chip formation 0.4 mm corner radius for stable cutting edge Consistent performance through advanced coating and grade The insert is built on the WKP35S coated carbide grade from the Tiger·tec Silver family, offering a balance of wear resistance and thermal stability that supports higher cutting parameters in many setups. This combination helps to maintain dimensional stability over longer tool life, which contributes directly to predictable cycle times and fewer interruptions in serial operations. The coated grade is optimised for the thermal and mechanical demands of machining steel and cast iron, providing a measurable uplift in process reliability compared with uncoated or older coatings. Controlled chips and safer machining for smoother cycles Equipped with the D57 chipbreaker, the geometry focuses on producing short, consistent chips when working with both steel and cast iron workpieces. Controlled chip formation reduces the risk of edge build-up and tool pressure spikes, lowering the likelihood of tool breakage and machine downtime. The combination of the chipbreaker and the insert’s cutting edge design supports efficient swarf evacuation in blind and through-hole operations, which is particularly valuable in automated or high-throughput machining cells where stable chip control reduces manual intervention. Precision geometry for repeatable results and easy integration The rectangular form with a 0.4 mm corner radius and a 7° clearance angle delivers a robust cutting edge that resists chipping while still allowing precise engagement in the cutting zone. The insert’s nominal size (06) and T2 thickness are compatible with a wide range of standard toolholders designed for this insert family, and the tolerance class M ensures consistent seating and repeatable clamping accuracy. These attributes simplify tool set-up, reduce indexing variance and help to maintain surface finish and dimensional tolerance across batches. Contact Metav Werkzeuge for tailored application support and to secure genuine Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LCMX06T204-D57-WKP35S-WALTER Article: LCMX06T204-D57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Size: 06 Thickness: T2 Tolerance class: M Chipbreaker: D57 Materials and features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Shape: Rectangle Suitable for: Steel (P), Cast iron (K) Execution: X FAQ What materials is this insert suitable for? The LCMX06T204-D57 WKP35S from Walter Tools is designed for machining steel and cast iron, corresponding to the P and K groups under ISO 513. How does the Tiger·tec Silver grade affect performance? The Tiger·tec Silver coating on the WKP35S grade improves thermal stability and wear resistance, which supports longer tool life and more consistent cutting performance when using the Walter Tools insert. What benefit does the D57 chipbreaker provide? The D57 chipbreaker on this insert promotes short, controlled chips for safer evacuation and fewer interruptions, making the insert well suited to automated production and deep boring applications. Is the insert compatible with standard holders for size 06 inserts? Yes, the rectangular format and size 06 geometry of the insert are compatible with holders designed for this family, and the tolerance class M supports repeatable seating. Can this insert handle high-feed or interrupted cutting? The robust corner radius and coated grade give the insert good edge stability for demanding conditions; specific parameters depend on the machine, holder and workpiece, so tool setup should follow established cutting data. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand Walter Tools is used for identification and explanatory purposes only; there is no affiliation implied. The offered article is original and factory-new stock of the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LCMX06T204-D57 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSP45G grade for improved chip control and extended tool life; the LCMX06T204-D57 insert offers a balanced geometry with a 7° relief angle and 0.4 mm corner radius for reliable drilling and boring in demanding materials. Order directly via Metav Werkzeuge or request application advice from our consultants. LCMX06T204-D57 WSP45G drilling/boring indexable insert – Tiger·tec Gold, versatile P/M/S — Walter Tools The LCMX06T204-D57 WSP45G is a rectangular drilling and boring insert engineered for robust cutting performance across steel, stainless steels and heat‑resistant alloys. Tiger·tec Gold PVD coating for long life WSP45G grade for stable chip formation 7° relief angle for reliable cutting 0.4 mm corner radius for consistent edge Predictable chip control for uninterrupted production The combination of the Tiger·tec Gold coating and the WSP45G cutting grade delivers consistent chip formation and extended edge life under continuous machining. Designed for drilling and boring tasks, this insert is optimised for the typical heat and deformation behaviour of the material groups P / M / S, meaning unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys or titanium. The result is fewer interruptions, reduced rework and a measurable improvement in process stability during medium‑to‑demanding operations. Geometry that supports repeatable cutting performance A deliberate geometry with a 7° relief angle and 0.4 mm corner radius provides a balance between cutting edge strength and surface integrity. The rectangular plate form and T2 thickness give reliable clamping and repeatable positioning in compatible tool bodies, while the D57 chipbreaker assists in producing controlled chip shapes. Tolerance class M ensures consistent plate dimensions for predictable tool setting and interchangeability, supporting efficient changeovers and minimised setup time. Wide material applicability with clear technical benefits Thanks to the PVD coating technology and the WSP45G substrate characteristics, the insert copes well with the thermal and mechanical loads encountered when machining steels, stainless steels and high‑temperature alloys. This translates into a lower tendency for built‑up edge on stainless grades, improved flank wear resistance on steels and increased cutting reliability on difficult‑to‑machine superalloys. Where surface finish and dimensional repeatability matter, the cutting grade offers an excellent compromise between wear resistance and toughness. Practical integration and application guidance The insert is supplied in the LCMX06T204‑D57 form suitable for drilling/boring toolholders that accept rectangular indexable plates. Its robust edge preparation and coating reduce the risk of unexpected tool failures and contribute to predictable production yields. For customers planning tool changes or looking for tailored cutting parameters, Metav Werkzeuge provides technical assistance to align feed and speed recommendations with machine capability and workpiece specification. Discuss application requirements with Metav Werkzeuge and specify the Walter Tools LCMX06T204-D57 WSP45G insert for improved throughput; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for precise cutting data and ordering advice Technical Data Article number: LCMX06T204-D57-WSP45G-WALTER Designation: LCMX06T204-D57 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Relief angle: 7° Corner radius: 0.4 mm Plate size: 06 Thickness: T2 Tolerance class: M Plate form: Rectangular Materials & special features Grade: WSP45G Coating: Tiger·tec Gold PVD Material applications: P / M / S Chipbreaker: D57 Execution: X Product type: Drilling/boring indexable insert FAQ Which materials can be machined with this insert? The LCMX06T204‑D57 WSP45G insert by Walter Tools is suitable for machining material groups P, M and S — namely steels, stainless steels and heat‑resistant superalloys/titanium. How does the Tiger·tec Gold coating benefit drilling and boring operations? The Tiger·tec Gold PVD coating on the insert improves wear resistance and thermal stability, which enhances edge life and maintains cutting performance during prolonged drilling and boring cycles. What is the effect of the 0.4 mm corner radius on part quality? A 0.4 mm corner radius increases edge robustness and reduces edge chipping, supporting consistent hole geometry and improved surface integrity during interrupted or steady cutting. Is the insert compatible with standard rectangular drilling toolholders? The LCMX06T204‑D57 plate form matches toolholders designed for rectangular indexable inserts of this designation; confirm compatibility with the specific holder catalogue before assembly. Which chip behaviour can be expected with the D57 chipbreaker? The D57 chipbreaker is designed to produce controlled chip shapes for effective evacuation in drilling and boring, helping to prevent re‑cutting and thus improving process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
LCMX06T204-D57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, robust edge geometry and consistent tolerance class for reliable drilling and bore-enlargement operations; order directly via Metav Werkzeuge or consult the technical team for process matching. LCMX06T204-D57 WXP40 drilling/boring indexable insert by Walter Tools — rectangular form, chipbreaker D57 The LCMX06T204-D57 WXP40 is a rectangular indexable insert designed for drilling and bore-enlargement applications where stable cutting and predictable chip formation are required Rectangular geometry for secure seating Uncoated carbide grade WXP40 for versatility 7° clearance angle for stable cutting 0.4 mm corner radius for edge durability Consistent chip control and cutting performance for productive machining The insert combines a specialised chipbreaker D57 with an uncoated carbide grade to deliver predictable chip formation and stable cutting forces. In practice, the chipbreaker channels swarf away from the cutting zone, reducing recutting and improving hole quality; this is particularly valuable when processing interrupted cuts or difficult-to-evacuate chips. The geometry, including the 0.4 mm corner radius and 7° clearance angle, supports a balance between edge strength and cutting aggressiveness, helping to extend tool life while maintaining process stability. This means fewer interruptions and more consistent cycle times in batch production. Secure clamping and straightforward integration into existing toolholders The rectangular form and the defined plate size ensure precise seating in standard drilling and boring holders, reducing the risk of micro-movement that can affect concentricity. The T2 plate thickness and tolerance class M support repeatable positioning and dimensional reliability, which is beneficial for operations that require tight runout and surface finish. For workshop planners and operators, the physical dimensions and form factor simplify tool change routines and inventory handling; for process engineers, the insert’s specification enables reliable calculation of cutting data and feed rates. If material compatibility is uncertain, the product matrix should be consulted before application. Practical selection advice and suitability checks for different workpieces Although the grade WXP40 is an uncoated cemented carbide designed for broad use, material-specific suitability must be verified using the manufacturer’s product matrix. The insert is supplied in execution X and belongs to the Walter Schneidstoffsorte open series, which emphasises general-purpose performance and economical consumption. For specialists less familiar with insert terminology: the chipbreaker defines how material is fractured and evacuated; the corner radius affects edge robustness and finish; and the clearance angle controls the contact between flank and workpiece. These parameters together determine achievable hole quality and process reliability. Contact Metav Werkzeuge for tailored application advice and procurement of Walter Tools inserts; technical consultations and compatibility checks are available via email or telephone. Technical data Article number: LCMX06T204-D57-WXP40-WALTER Product designation: Bohr-/Aufbohrwendeschneidplatte LCMX06T204-D57 WXP40 Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 06 Plate thickness: T2 Tolerance class: M Special features Chipbreaker: D57 Grade: WXP40 (uncoated carbide) Plate form: Rectangular Execution: X Series: Walter Schneidstoffsorte - Serie offen Designation: LCMX06T204-D57 WXP40 Material specification: Katalogabhängig FAQ What materials is this insert suitable for? The WXP40 grade is an uncoated carbide designed for versatile use; however, material suitability should be checked in the Walter product matrix and matched to the intended workpiece to ensure optimal performance. How does the chipbreaker D57 affect drilling performance? The D57 chipbreaker promotes controlled chip formation and evacuation during drilling and bore enlargement, which reduces the risk of recutting and supports consistent hole quality with the LCMX06T204-D57 insert. What are the key mounting considerations for this rectangular insert? Secure seating in a compatible drill or boring holder is essential; the rectangular geometry and T2 thickness deliver repeatable clamping and positioning, aiding concentricity and surface finish. Can the corner radius be chosen for different surface finishes? The 0.4 mm corner radius offers a compromise between edge strength and surface finish; for finer finishes or different cutting strategies, alternative insert radii should be considered according to the machining plan. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are referenced here for explanatory purposes only. The offered article is an original, factory-new product of the manufacturer.
LCMX06T204-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger-tec Silver coating and WKP25S grade to extend component uptime and boost process stability; the rectangular geometry with a 0.4 mm corner radius and 7° clearance ensures repeatable hole quality. Order genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for application support. LCMX06T204-E57 WKP25S — Indexable drilling/reaming insert (rectangular), Walter Tools LCMX06T204-E57 WKP25S is a rectangular indexable insert designed for drilling and reaming applications in steel and cast iron, optimised for stable chip formation and extended tool life Rectangular indexable insert, size 06 Tiger-tec Silver coating for wear resistance Grade WKP25S for steel and cast iron 7° clearance angle, 0.4 mm corner radius Predictable tool life through coating and grade The combination of the Tiger-tec Silver coating and the WKP25S cutting grade delivers higher wear resistance and consistent performance when machining steels and cast irons. The advanced coating reduces abrasive wear and thermal impact during cutting, which results in fewer indexings and less unplanned downtime. The integrated chipbreaker supports controlled chip formation, improving evacuation and reducing machining disturbances. These characteristics translate directly into more stable cycle times and improved productivity on serial drilling and boring operations. Geometry that stabilises hole quality A rectangular insert form with a 0.4 mm corner radius and a 7° clearance angle provides a secure cutting edge for repeatable holes and reliable bore finishes. The defined corner radius helps to distribute cutting forces and reduces the risk of edge chipping, while the clearance angle lowers friction at the contact zone. For operations where dimensional consistency and surface quality matter, this engineered geometry supports consistent hole roundness and repeatable diameter control across batch production. Easy specification and material compatibility The indexable insert is specified for the ISO groups P (steel) and K (cast iron), matching the typical demands of these materials in terms of heat generation and abrasive wear. The E57 chipbreaker promotes short, manageable chips in interrupted or continuous drilling, aiding chip evacuation in deep-hole work. With a tolerance class M, the insert fits standard toolholders with predictable seating and repeatability, simplifying tool change routines and inventory management in production environments. Practical gains for production teams Production engineers and toolroom teams will appreciate the clear performance advantages: longer service life, fewer tool changes and improved process security. The insert’s dimensions (size 06, thickness T2) and proven coating technology suit both stable serial machining and flexible jobbing. For application-specific recommendations—cutting speeds, feeds and holder selection—Metav Werkzeuge’s consultants provide tailored advice to align the insert’s capabilities with the machining task at hand. For material-specific machining data, supply of genuine Walter Tools inserts or recommendations on integrating the LCMX06T204-E57 WKP25S into existing toolholders, contact Metav Werkzeuge — our specialists will advise on process optimisation and availability Technical data Article number: LCMX06T204-E57-WKP25S-WALTER Product type: Indexable drilling/reaming insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WKP25S Shape: Rectangular Size: 06 Thickness: T2 Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: E57 Tolerance class: M Applicable materials: Steel (P), Cast iron (K) Facts Corner radius: 0.4 mm Clearance angle: 7° Size designation: 06 Thickness designation: T2 Tolerance class: M Special features Coating technology: Tiger-tec Silver Cutting grade: WKP25S (coated carbide) Chip control: E57 Main applications: Steel and cast iron machining Geometry: Rectangular insert form FAQ What materials is this insert suitable for? The LCMX06T204-E57 WKP25S insert is specified for P (steel) and K (cast iron) applications and is optimised for typical chip formation and wear patterns in those groups. How does the Tiger-tec Silver coating help performance? The Tiger-tec Silver coating reduces abrasive wear and improves thermal resistance, resulting in longer tool life and more consistent cutting performance for the WKP25S grade. What role does the E57 chipbreaker play in drilling? The E57 chipbreaker promotes controlled, short chips during drilling and reaming, improving evacuation in deep or interrupted cuts and reducing the risk of chip-related damage. Which tolerance class and dimensions ensure fitment in holders? This insert is supplied to tolerance class M, size 06 with thickness T2, ensuring predictable seating and interchangeability in compatible indexable-drill toolholders. Is this an original Walter Tools product? Yes, the LCMX06T204-E57 WKP25S is an original factory-new insert from Walter Tools, designed for industrial drilling and reaming tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer (Walter Tools).
LCMX06T204-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKP35S grade for extended tool life and consistent chip control; the result is reliable productivity in steel and cast iron machining. Order the insert through Metav Werkzeuge or consult our specialists for application-specific recommendations. LCMX06T204-E57 WKP35S — Rectangular indexable insert for boring with Tiger‑tec Silver coating (Walter Tools) A LCMX06T204-E57 WKP35S rectangular indexable insert designed for precision boring and reboring operations in steel and cast iron, combining a coated carbide grade with a geometry optimised for stable cutting Tiger‑tec Silver coating for extended life Suitable for steel (P) and cast iron (K) 7° clearance angle for stable cutting 0.4 mm corner radius for precise finishes Proven wear resistance for demanding steel and cast‑iron work The Tiger‑tec Silver coating together with the WKP35S coated‑carbide grade is engineered to resist abrasive wear and maintain a stable cutting edge under the temperatures typical of steel machining. This combination reduces flank wear and supports longer tool life, which translates into fewer insert changes and higher uptime on production lines. The formulation is adapted for the heat and chip characteristics of group P (steel) materials while also offering robustness for group K (cast iron) applications, making the insert a versatile choice for mixed‑material batches. Geometry that improves surface quality and chip control A rectangular plate form with a 0.4 mm corner radius and an E57 chipbreaker provides consistent chip formation and helps control intermittent cutting loads during boring. The 7° clearance angle reduces rubbing at the flank and lowers cutting forces, which benefits both surface finish and dimensional stability. Explaining the chipbreaker: it is a shaped relief on the rake face that segments chips and directs them away from the cutting zone, decreasing the risk of built‑up edge and improving machining predictability for medium to heavy cuts. Practical integration into machining processes Designed as a boring/reboring indexable insert, the item fits stable toolholders for serial and job‑shop operations; the plate size 06 and thickness T2 are compatible with common boring systems. The tolerance class M supports repeatable positioning for accurate diameters, while the coated grade helps maintain performance across varied cutting speeds. For production planning, the insert's multi‑material capability reduces inventory complexity and enables smoother process transitions between steel and cast‑iron components. Discuss machining parameters and best replacement intervals with Metav Werkzeuge to ensure optimum performance of Walter Tools inserts; contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: LCMX06T204-E57-WKP35S-WALTER Designation: LCMX06T204-E57 WKP35S Product type: Boring/reboring indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Core technical data Size: 06 Thickness: T2 Clearance angle: 7° Corner radius: 0.4 mm Shape: rectangular Chipbreaker: E57 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP35S (coated carbide) Material suitability: steel (P), cast iron (K) Execution: X Plate designation (without grade): LCMX06T204-E57 FAQ What materials can this insert machine effectively? The insert is designed for machining steel (P) and cast iron (K); the WKP35S grade and Tiger‑tec Silver coating provide abrasion resistance suited to these groups. How does the E57 chipbreaker affect machining? The E57 chipbreaker promotes controlled chip segmentation and evacuation, reducing built‑up edge and improving process stability for boring operations with the LCMX06T204‑E57 WKP35S insert. What does the 0.4 mm corner radius mean for the finished part? A 0.4 mm corner radius offers a balance between edge strength and achievable surface quality, helping to produce consistent bore wall finishes while resisting chipping. Is the insert suitable for high‑volume production? Yes; the combination of the Tiger‑tec Silver coating and WKP35S grade is developed for reliable, repeatable performance, supporting longer tool life and steady productivity in series production. Which series and brand manufacture this insert? This insert is part of the Tiger‑tec Silver series from Walter Tools, supplied under the designation LCMX06T204‑E57 WKP35S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The brand Walter Tools is mentioned for identification purposes; the offered article is an original, factory‑new product of the manufacturer. There is no affiliation between Metav Werkzeuge and the mentioned trademark owners.
LCMX06T204-E57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of versatile Tiger·tec Gold coating, a precise 0.4 mm corner radius and a low 7° clearance angle for reliable drilling and bore-enlargement operations. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific cutting data. LCMX06T204-E57 WSP45G — Drilling/reaming indexable insert, Tiger·tec Gold (Walter Tools) The LCMX06T204-E57 WSP45G is a rectangular indexable insert designed for drilling and bore-enlargement, optimised for versatile milling-style operations in steels, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating Versatile for Stahl, rostfreier Stahl, S-alloys 7° clearance angle for stable cutting 0.4 mm corner radius for reliable edge life High process reliability through advanced coating and grade The combination of the Tiger·tec Gold PVD system and the WSP45G grade provides a balance between wear resistance and toughness. Coated carbide technology ensures a stable cutting edge under varying thermal loads, which translates into fewer interruptions and more predictable tool life. For production environments where consistency matters, this insert supports repeatable results and reduced rework rates. Optimised geometry to reduce rework and improve surface quality With a shallow 7° clearance angle and 0.4 mm corner radius, the insert maintains a robust cutting edge while limiting built-up edge formation. The rectangular form offers defined seating precision which assists in maintaining concentricity during drilling and bore-enlargement. The geometry assists in producing consistent surface finishes and dimensionally stable holes, reducing downstream finishing work. Effective chip control and wide material coverage The integrated E57 chipbreaker and the coated substrate are tuned for chip formation across group P, M and S materials — that is, Stahl, rostfreier Stahl and superalloys/Titan. Good chip control lowers the risk of chip recutting and coolant blockages, increasing machining uptime. Explaining chipbreaker function: the micro-geometry directs and segments chips to prevent long, stringy swarf, which is critical in deep-hole or interrupted cuts. Practical benefits for workshop integration and inventory management The insert’s designation and tolerance class facilitate straightforward tool selection and repeatable mounting. With a clear ISO-style designation and tolerance class M, the insert integrates easily into existing tool holders and tool lists, simplifying procurement and tool-change routines. The balanced mix of toughness and wear resistance supports varied part runs, reducing the need for multiple specialised grades. Contact Metav Werkzeuge for tailored recommendations on using the Walter Tools Tiger·tec Gold WSP45G insert and to obtain application-specific cutting data directly from our specialists Technical Data Article number: LCMX06T204-E57-WSP45G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte LCMX06T204-E57 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Core specifications Clearance angle: 7° Corner radius: 0.4 mm Plate size: 06 Thickness designation: T2 Tolerance class: M Compatibility and features Chipbreaker: E57 Plate form: Rectangle Execution: X Material applicability: Stahl; rostfreier Stahl; superalloys/Titan Material type: coated carbide FAQ What materials is this insert suitable for? The LCMX06T204-E57 WSP45G insert (Walter Tools) is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys/Titan, reflecting its P/M/S applicability. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on the WSP45G grade increases wear resistance while maintaining edge toughness, allowing the insert to perform reliably under variable thermal conditions. What role does the E57 chipbreaker play? The E57 chipbreaker shapes and segments chips to improve evacuation and reduce chip recutting, which supports cleaner machining and longer uninterrupted cycles with the LCMX06T204-E57 WSP45G. Is the insert compatible with standard holders for drilling/reaming operations? The insert’s ISO-style designation and tolerance class M allow compatibility with holders specified for this family of rectangular inserts, simplifying tool changes. What edge life can be expected compared to uncoated grades? Coated carbide grades such as WSP45G typically offer improved edge life versus uncoated carbides in mixed production; actual life depends on cutting data and workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
LCMX06T204-E57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of economical operation, consistent chip control and simple tool set-up to maintain uninterrupted production. The robust, uncoated tungsten carbide grade and the rectangular geometry support stable chip formation and predictable performance; order directly via Metav Werkzeuge or contact our consultants for application advice. LCMX06T204-E57 WXP40 Drilling/Boring Indexable Insert (Rectangular, r0.4) by Walter Tools LCMX06T204-E57 WXP40 is an indexable insert for drilling and boring tasks, designed for versatile chip control in general metalcutting applications. Uncoated carbide grade WXP40 Rectangular form with 0.4 mm corner radius 7° relief angle for controlled cutting E57 chipbreaker for consistent chips Reliable productivity through material and grade The combination of the WXP40 grade and an uncoated carbide substrate provides a cost-effective solution for standard turning and boring operations where uncoated hardness and toughness are required. The solid, uncoated cutting material is intended to deliver stable chip formation and repeatable tool life under a range of cutting conditions. For manufacturing environments prioritising predictable performance, this insert reduces variability between cycles and supports efficient tool planning. The specification notably benefits processes that value tool economy without the added expense of multilayer coatings. Geometry engineered for process security and ease of handling The rectangular form with a corner radius of 0.4 mm and a 7° relief angle is configured to balance edge strength and surface finish. The compact geometry minimises vibration in light-to-medium cutting depths and assists in achieving consistent bore quality. The integrated E57 chipbreaker promotes short, controllable chips that are simpler to evacuate from the cutting zone, which in turn reduces rework and machine downtime. Set-up is straightforward: the defined relief and tolerance class M support repeatable seating in standard toolholders, helping to shorten changeover times and maintain cycle consistency. Application guidance and suitability This insert is supplied as part of the Walter Tools series and is classified as an uncoated carbide option; substrate and coating information is catalogue-dependent and should be verified in the product matrix for specific workpiece materials. The insert is principally intended for general-purpose drilling and boring tasks where an economical, robust cutting edge is required. When selecting cutting data, consider the material class of the workpiece and verify that the WXP40 grade matches the process requirements; consult the manufacturer matrix for best practice feed and speed ranges to maximise tool life and surface quality. For tailored advice on using Walter Tools' LCMX06T204-E57 WXP40 insert in specific applications, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for recommendations and availability. Technical data Article number: LCMX06T204-E57-WXP40-WALTER SKU: LCMX06T204-E57-WXP40-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte Designation: LCMX06T204-E57 WXP40 Core data Insert size: 06 Plate thickness: T2 Relief angle: 7° Corner radius: 0.4 mm Tolerance class: M Designs and special features Shape: Rectangular Chipbreaker: E57 Grade series: Walter Schneidstoffsorte - Serie offen Grade: WXP40 Substrate/coating: Uncoated carbide (catalogue-dependent) FAQ What materials is this insert intended for? The LCMX06T204-E57 WXP40 insert is an uncoated carbide option; suitability for specific materials should be checked in the Walter Tools product matrix to confirm compatibility with particular steels or alloys. How does the E57 chipbreaker affect machining? The E57 chipbreaker is designed to produce controllable chip forms, improving evacuation in drilled and bored holes and reducing the risk of chip-related interruptions during machining. Does the insert require a special toolholder? The rectangular form and T2 thickness are compatible with standard holders designed for this insert family; adherence to the specified tolerance class M ensures consistent seating. What benefits does the 0.4 mm corner radius provide? A corner radius of 0.4 mm enhances edge robustness for intermittent cutting and helps achieve a balance between surface finish and edge strength in bore operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
LCMX06T204-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the WKP35S grade together with the F57 chipbreaker to achieve consistent chip control and productive machining of steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. LCMX06T204-F57 WKP35S — Drill/Boring indexable insert, Tiger·tec Silver, for steel & cast iron by Walter Tools A high-performance drill/boring indexable insert, LCMX06T204-F57 WKP35S, designed for productive machining of steel and cast iron in series production and toolrooms. Tiger·tec Silver coating for enhanced tool life Optimised F57 chipbreaker for reliable chip control Suitable for steel and cast iron machining Rectangular insert with 0.4 mm corner radius Consistent productivity through advanced coating and grade The Tiger·tec Silver coating combined with the WKP35S carbide grade delivers a balance of wear resistance and toughness that suits mixed production environments. This combination is tailored for the thermal and abrasive conditions encountered when machining steel (ISO group P) and cast iron (ISO group K). The result is reduced flank wear and longer effective cutting life, which translates into fewer tool changes and a steadier production rhythm. The design therefore supports manufacturers aiming for stable cycle times and reproducible component quality. Geometry engineered for stable cutting and repeatable results The rectangular insert geometry with a 0.4 mm corner radius and a nominal clearance angle of 7° provides mechanical strength at the cutting edge while enabling precise chip formation. The medium tolerance class M and the plate thickness T2 ensure accurate seating and repeatable indexing in standard tool holders. These features improve force distribution during drilling and boring operations and reduce the risk of edge chipping when engaging heavier cross-sections. Reliable chip control for safer machining and better surface finishes An optimised F57 chipbreaker on the insert leads to predictable chip segmentation when removing material from both steel and cast iron, helping to avoid long, tangled chips that can impede coolant flow and compromise surface quality. Controlled chips also lower the chance of workpiece damage and facilitate automated chip handling. For workshops targeting consistent surface finish and diminished rework, this chip control contributes directly to process reliability and overall throughput. Practical integration into daily production and tool management As part of a recognised series, the insert is suited to common clamping systems and is identified by the clear ISO-style designation. The compact dimensions and rectangular form make it straightforward to stock and to exchange during shift changes. Using inserts from a consistent grade and series such as WKP35S in Tiger·tec Silver simplifies tool inventory and enables predictable tool-life planning, which supports leaner procurement and maintenance routines for machining centres. Select Walter Tools’ Tiger·tec Silver WKP35S insert for robust chip control and reliable machining — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LCMX06T204-F57-WKP35S-WALTER Article designation: LCMX06T204-F57 WKP35S Product type: Drill/Boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Core specifications Free angle: 7° Corner radius: 0.4 mm Plate form: Rectangular Plate size: 06 Chipbreaker: F57 Plate thickness: T2 Tolerance class: M Design & special features Suitability: Steel (P) and Cast iron (K) Execution: X Series description: Coated carbide insert in Tiger·tec Silver technology Identification: ISO-style designation LCMX06T204-F57 WKP35S FAQ Which materials is this insert suitable for? The insert is designed for steel (ISO group P) and cast iron (ISO group K); the WKP35S grade and Tiger·tec Silver coating are matched to these workpiece families. What does the F57 chipbreaker achieve? The F57 chipbreaker provides controlled chip formation for safer machining and improved surface finish when removing material from steel and cast iron. How robust is the cutting edge geometry? The rectangular geometry with a 0.4 mm corner radius and 7° clearance offers a reinforced cutting edge that resists chipping under typical drilling and boring loads. Is the insert suitable for automated production environments? Yes; the consistent performance of the WKP35S grade in the Tiger·tec Silver series supports predictable tool life, making it a reliable choice for series production and automated machining cells. How is the insert identified on orders and tool lists? Orders and tool lists use the ISO-style designation LCMX06T204-F57 WKP35S (SKU LCMX06T204-F57-WKP35S-WALTER) to ensure exact identification. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation and comparison only and indicate no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the stated manufacturer.
LCMX06T204-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold grade and the WSP45G PVD coating combined with a 0.4 mm corner radius and 7° clearance angle for reliable chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. LCMX06T204-F57 WSP45G — Bohr-/Aufbohrwendeschneidplatte by Walter Tools, Tiger·tec Gold, 7° clearance The LCMX06T204-F57 WSP45G is a coated carbide indexable insert designed for drilling and boring operations, optimised for mixed-material production including Stahl, rostfreier Stahl and Titan-class alloys. Tiger·tec Gold PVD coating Versatile for Stahl, rostfreier Stahl and superalloys Stable cutting edge with 0.4 mm radius 7° clearance angle for consistent chip control High-efficiency performance for mixed-material production The combination of the Tiger·tec Gold series and the WSP45G grade delivers high process reliability in operations that require both wear resistance and edge stability. Designed as a coated carbide insert, the geometry of the rectangular plate and the F57 chipbreaker promote consistent chip control during drilling and rough boring, reducing rework cycles and increasing machine throughput. The insert is particularly effective where temperature and toughness vary between workpiece types; its PVD-based coating supports stable cutting forces and improved surface integrity on both unalloyed and alloyed Stahl components, while helping to limit built-up edge on more tenacious materials. Durable edge life and predictable tool behaviour A 0.4 mm corner radius and a 7° clearance angle create a balance between cutting strength and surface finish. The modest corner radius increases edge robustness during interrupted cuts and heavy engagement, whereas the clearance angle prevents rubbing and facilitates smoother entry and exit during bore cycles. These geometry decisions translate into fewer insert changes and steady component tolerances—attributes that directly support productivity targets on batch and series production. The coated hardmetal substrate enhances resistance to flank wear, so the insert sustains performance over longer toolpaths without compromising dimensional repeatability. Application scope and machining advice This insert is coded for P / M / S workpiece groups, meaning suitability for a broad set of applications: P indicates general Stahl machining, M indicates rostfreier Stahl (austenitic and other stainless grades), and S covers heat-resistant superalloys and Titan. In practical terms, the grade is tailored for milling and boring operations with variable feed and depth conditions where a robust, multi-purpose solution is preferred. For finishing passes or where tight surface-roughness demands exist, combine the insert geometry with appropriate feed reduction and coolant strategy to exploit the coating’s thermal stability and to avoid edge build-up. For reliable, versatile machining with Walter Tools’ Tiger·tec Gold inserts, request technical matching and availability from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and ordering assistance Technical data SKU: LCMX06T204-F57-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte LCMX06T204-F57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger·tec Gold Grade: WSP45G Execution: X ISO designation: LCMX06T204-F57 WSP45G Size: 06 Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rectangle Chipbreaker: F57 Plate thickness: T2 Tolerance class: M Special features Coated hardmetal (PVD) — Tiger·tec Gold technology Suitable for Stahl, rostfreier Stahl and Titan-class alloys Designed for stable chip formation and robust cutting edge Rectangular insert for drilling and boring applications Versatile grade for varied feeds and depths FAQ What materials can this insert machine reliably? The LCMX06T204-F57 WSP45G insert is specified for P / M / S groups and is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan-class materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating on the WSP45G grade increases thermal stability and wear resistance, enabling consistent cutting performance and longer tool life in mixed-material production. Is the corner radius suitable for roughing operations? Yes, the 0.4 mm corner radius provides a robust cutting edge that improves resistance to chipping during roughing and interrupted cuts while maintaining acceptable surface quality. Which chipbreaker should be used for general boring tasks? The insert features an F57 chipbreaker, which supports controlled chip formation and evacuation in typical drilling and boring cycles. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners. Mention of brand names serves explanatory purposes only and implies no affiliation. The offered item is an original, factory-new product of the stated manufacturer.
LCMX06T204-F57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, a compact rectangular geometry and the cost-efficiency of an uncoated carbide grade for consistent holemaking performance; order or request availability via Metav Werkzeuge for a seamless procurement process. LCMX06T204-F57 WXP40 Drilling/Boring indexable insert — Walter Tools The LCMX06T204-F57 WXP40 is a rectangular drilling and boring indexable insert designed for robust holemaking and chip-controlled roughing in general machining applications. Rectangular insert, 0.4 mm corner radius Uncoated carbide grade WXP40 Chipbreaker F57 for controlled chips 7° clearance angle for secure seating Reliable performance for efficient holemaking The WXP40 grade is supplied as an uncoated carbide option that prioritises economical performance and consistent cutting behaviour in serial operations. Thanks to the grade’s composition and the integrated chipbreaker F57, the insert supports stable chip formation, which reduces interruptions caused by chip jamming and contributes to higher process reliability. In practical terms, this reliability translates into shorter cycle times and improved productivity when used for drilling and boring tasks where repeatable chip evacuation matters. Precise geometry for repeatable seating and life The insert’s rectangular shape combined with a 0.4 mm corner radius and a 7° clearance angle ensures secure seating in compatible tool bodies and predictable engagement with the workpiece. The tolerance class M and the T2 thickness specification support dimensional consistency across batches, helping to maintain concentricity and minimise vibration during cutting. These geometric details help to protect the cutting edge from uneven loads and can extend effective tool life when paired with a suitably rigid holder and correct cutting parameters. Controlled chips and surface quality where it counts The incorporated chipbreaker F57 is designed to break and direct chips efficiently during axial cutting operations, which improves swarf control and can contribute to a more consistent bore surface. While the insert is an economical, uncoated variant, its behaviour in different materials should be validated against the manufacturer’s product matrix; material suitability must be checked per the product matrix to ensure optimal selection for specific alloys or grades. When properly matched to the workpiece and cutting conditions, the insert supports a balance of productivity and acceptable surface finish in many holemaking scenarios. Application guidance and installation notes The designation LCMX06T204-F57 WXP40 identifies the insert geometry, chipbreaker and grade, simplifying inventory management and tool selection. Use the rectangular insert in compatible drilling/boring tool bodies that accept the specified insert form and thickness (T2). Correct clamp and seating are essential to exploit the 7° clearance and maintain repeatable results; poor seating can negate the benefits of the tolerance class and the intended chip control. For specialised materials or high-demand operations, consult the product documentation and the grade matrix to confirm match and limits before full-scale use. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts such as the LCMX06T204-F57 WXP40 and to arrange stock checks or ordering support. Technical data Article number: LCMX06T204-F57-WXP40-WALTER Designation: LCMX06T204-F57 WXP40 Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Execution: X Core technical data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Chipbreaker: F57 Thickness: T2 Tolerance class: M Materials & special features Grade: WXP40 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Insert form: Rectangular Intended use: Drilling and boring operations Note: Verify workpiece suitability via the product matrix FAQ What materials is this insert suitable for? Material suitability for the LCMX06T204-F57 WXP40 should be validated against the manufacturer’s product matrix; the grade is an uncoated carbide and the intended workpiece range is specified in the technical documentation. Is the insert coated or uncoated? The WXP40 grade for this insert is supplied as uncoated carbide, which offers cost-effective cutting performance in appropriate applications. What does the chipbreaker F57 achieve? The chipbreaker F57 is engineered to promote controlled chip formation and evacuation during axial cutting, improving swarf handling and contributing to consistent bore quality. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a balance between edge strength and cutting precision, helping to resist edge chipping while maintaining acceptable surface finish in holemaking operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools.
LDMT08T204R-D51 WKP25S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating, WKP25S carbide grade and a precise 0.4 mm corner radius for extended tool life and consistent surface finishes; order the LDMT08T204R‑D51 WKP25S milling insert through Metav Werkzeuge or consult the specialists for process-specific recommendations. LDMT08T204R-D51 WKP25S milling insert — Walter Tools, Tiger·tec Silver, for steel and cast iron (15° relief, 0.4 mm radius) A robust LDMT08T204R‑D51 WKP25S milling insert designed for stable chip formation and reproducible finishes in steel and cast iron machining. Tiger·tec Silver coating for wear resistance WKP25S grade optimised for P and K materials 15° relief angle for versatile milling setups 0.4 mm corner radius for repeatable surface quality Extended tool life through advanced coating and grade The combination of the Tiger·tec Silver coating with the WKP25S coated‑carbide grade delivers measurable improvement in wear resistance and edge stability. This results in longer intervals between indexings and reduced tool changes, supporting continuous production and lowering indirect machining costs. The coating technology is engineered to resist abrasive wear typical for cast iron while maintaining a stable cutting edge when machining a broad range of steels, so the cutting edge life and dimensional consistency are improved. Predictable surface finish and repeatable results A defined 0.4 mm corner radius and the rectangular plate form ensure consistent contact geometry during each pass, which reduces vibration and improves finish quality. Coupled with the D51 chipbreaker geometry, the insert promotes controlled chip formation and evacuation; the result is fewer interruptions for recutting and a reduced need for downstream finishing. For operations where component conformity and surface integrity are priorities, this insert supports reproducible results across batch runs. Productivity gains for steel and cast iron machining Designed for the machining groups P (steel) and K (cast iron), the insert provides process reliability when switching between common workshop materials. The 15° relief angle offers flexible engagement in a range of milling strategies, from roughing to semi‑finishing, without compromising edge security. Using this grade in appropriate machine and cutting‑parameter settings can shorten cycle times and increase effective spindle utilisation, contributing to higher throughputs and predictable component quality. Integration into production and practical selection The insert’s standard designation and geometry make it straightforward to integrate into existing toolholders and programming routines. Selection of the LDMT08T204R‑D51 WKP25S should be matched with cutting data that reflect workpiece material, depth of cut and machine rigidity; Metav Werkzeuge can provide application guidance and the relevant cutting parameters. Clear specification of the chipbreaker, corner radius and relief angle simplifies process documentation and helps maintain consistent tool setup across shifts. For tailored cutting data, availability and application advice, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge will advise on grade selection and delivery options. Technical data Article number: LDMT08T204R-D51-WKP25S-WALTER Designation: LDMT08T204R‑D51 WKP25S Type: milling insert Manufacturer: Walter Tools Core dimensions & classifications Relief angle: 15° Corner radius: 0.4 mm Insert size: 08 Thickness: T2 Tolerance class: M Materials and special features Coating system: Tiger·tec Silver Carbide grade: WKP25S (coated carbide) Chipbreaker: D51 Applicable workpiece materials: Steel (P), Cast iron (K) Plate form: Rectangle Series: Tiger·tec Silver FAQ What materials is this insert suitable for? The LDMT08T204R‑D51 WKP25S insert is specified for steel (P) and cast iron (K) applications and is designed to handle the typical wear and chip forms of these groups. How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating enhances abrasive wear resistance and edge stability, extending cutting life and improving consistency across production batches. What finish can be expected from a 0.4 mm corner radius? A 0.4 mm corner radius provides a good balance between robustness and surface quality, producing repeatable finishes while resisting premature edge breakdown. Is the insert compatible with standard toolholders? The insert follows common geometry and indexing conventions for rectangular milling plates, facilitating integration into existing holders and tool‑changer systems. What role does the D51 chipbreaker play? The D51 chipbreaker promotes controlled chip formation and evacuation, reducing clogging and improving process stability during both roughing and semi‑finishing. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
LDMT08T204R-D51 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, reliable chip control from the D51 chipbreaker and a stable 15° clearance that supports consistent, productive machining; order the LDMT08T204R-D51 WKP35G insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. LDMT08T204R-D51 WKP35G — Indexable milling insert for steel and cast iron, Tiger·tec Gold, Walter Tools A LDMT08T204R-D51 WKP35G indexable milling insert designed for productive face and shoulder milling where reliable chip control and wear resistance are required Tiger·tec Gold coated carbide Suitable for steel and cast iron 15° clearance angle for stable cutting D51 chipbreaker for controlled chips Improved productivity through coating and geometry The combination of Tiger·tec Gold coating and the insert's geometry delivers measurable benefits in everyday machining. The advanced coating reduces flank and crater wear, which translates to longer tool life and fewer index changes. The rectangular form with a corner radius 0.4 reduces edge chipping risk while maintaining the required strength for interrupted cuts. For manufacturers processing unalloyed or alloyed steels and many cast iron grades, this means fewer tool changes and a steadier cycle time. Consistent chip control and surface quality The integrated chipbreaker D51 is engineered to generate short, manageable chips when cutting steel and cast iron, helping to avoid entanglement and ensuring a stable process. Controlled chips protect both the workpiece and the machine, resulting in a more consistent surface finish and reduced secondary handling. Explaining the term: a chipbreaker is a pocket or groove on the face of the insert designed to curl and break chips; D51 indicates the specific geometry optimised for the intended material groups. Application reliability and toolholder interaction With a nominal 15° clearance angle, the insert supports secure seating and dependable edge engagement during milling operations. The indexable insert format permits rapid replacement and repeatable positioning, lowering setup time and improving process repeatability. When combined with a properly matched cutter body and stable clamping, operators achieve high process security and predictable component outcomes—important for medium- to high-volume production. Contact Metav Werkzeuge for specific recommendations on milling strategies with Tiger·tec Gold inserts or to request a cutting data sheet and ordering options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: LDMT08T204R-D51-WKP35G-WALTER Designation: LDMT08T204R-D51 WKP35G Product: Indexable milling insert (milling insert) Brand: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Core specifications Clearance angle: 15° Corner radius: 0.4 Insert form: Rectangle Size: 08 Chipbreaker: D51 Thickness: T2 Tolerance class: M Features and applications Coating: Tiger·tec Gold (coated carbide) Substrate / material: P / K Suitable for: Steel (P) Suitable for: Cast iron (K) Main benefits: wear resistance, stable cutting edge, optimised chip formation FAQ Which materials can this insert machine effectively? The LDMT08T204R-D51 WKP35G insert from Walter Tools is designed for machining steel (P) and cast iron (K), offering a balance of wear resistance and edge stability for these groups. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this insert improves wear resistance and thermal stability, which means longer tool life and more consistent performance under typical milling conditions. How does the D51 chipbreaker affect machining? The D51 chipbreaker produces short, controlled chips that reduce the risk of entanglement and help maintain a stable cutting process and improved surface finish. Is the insert suitable for interrupted cuts and shoulder milling? Yes — the rectangular geometry and a corner radius 0.4 give the insert robustness for interrupted cuts and shoulder milling tasks while preserving edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LDMT08T204R-D51 WKP35S Wendeplatten - Walter Tools
Take advantage of robust wear resistance and reliable chip control for predictable cycle times and reduced tool changes; the combination of Tiger·tec Silver coating and the WKP35S grade offsets downtime and supports consistent surface quality. Order the insert directly via Metav Werkzeuge or contact the technical team for grade selection and process recommendations. LDMT08T204R-D51 WKP35S — indexable milling insert for steel and cast iron — Walter Tools LDMT08T204R-D51 WKP35S is a rectangular indexable milling insert designed for reliable roughing and semi-finishing of steel and cast iron components Tiger·tec Silver coating for long tool life WKP35S grade for steel and cast iron Rectangular form with 0.4 mm corner radius 15° clearance angle for versatile engagement Efficient cutting performance for steel and cast iron The LDMT08T204R-D51 WKP35S grade combines Tiger·tec Silver coating with a specially developed substrate to provide consistent wear behaviour in typical machining of steel and cast iron. The coating reduces thermal and abrasive wear, which supports longer indexable insert life and stabilised cutting forces. For production environments that prioritise repeatable component quality and predictable tool-change intervals, this combination delivers measurable gains in uptime and process reliability. The D51 chipbreaker assists in forming controllable chips that clear the cut quickly, contributing to stable cutting conditions and reduced risk of re-cutting. Geometry designed for stable feeds and long service intervals The insert’s 15° clearance angle and 0.4 mm corner radius are engineered to balance strength at the cutting edge with accessibility in interrupted cuts. The rectangular form and tolerance class M ensure consistent seating in standard carbide holders, reducing micro-movements that can accelerate wear. A stable edge geometry enables slightly higher feed rates with maintained surface finish, while the modest corner radius offers a compromise between edge strength and dimensional accuracy. These attributes support higher process security during sequence changes and help to keep machining windows narrow and reliable. Practical advantages for workshop productivity With the D51 chipbreaker and a compact size 08 designation, the insert is suited to modular milling strategies where predictable chip flow and indexability are essential. The T2 plate thickness and sturdy execution minimise the risk of premature breakouts under typical milling loads. For planners and operators, the result is fewer unexpected tool changes and simpler inventory management thanks to a clearly defined grade and ISO-compliant designation. The insert’s focus on wear resistance and chip control supports both small-batch flexibility and higher-volume production runs without compromising surface quality. For an application-specific recommendation on Walter Tools inserts or to discuss the best WKP35S grade for a particular material, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical support and availability information. Technical data SKU: LDMT08T204R-D51-WKP35S-WALTER Designation: LDMT08T204R-D51 WKP35S Product type: Indexable milling insert Brand: Walter Tools Series: Tiger-tec Silver Facts Clearance angle: 15° Corner radius: 0.4 mm Plate size: 08 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: D51 Form: Rectangular Material suitability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert optimised for? The LDMT08T204R-D51 WKP35S insert is optimised for steel and cast iron, with the WKP35S grade tailored to the thermal and abrasive conditions common to these ISO groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating reduces abrasive and thermal wear on the cutting edge, improving tool life and maintaining consistent cutting performance under cyclic loads. What role does the D51 chipbreaker play? The D51 chipbreaker promotes controlled chip formation and evacuation, which helps maintain stable cutting conditions and reduces the likelihood of chip-related interruptions. Is the insert compatible with standard square/rectangular holders? Yes, the rectangular form and tolerance class M are suitable for standard holders designed for LDMT-style inserts, enabling accurate seating and repeatable clamping. Can this insert be used for stainless steel? Suitability for stainless steel is not specified for the WKP35S grade; the insert is specifically indicated for steel and cast iron applications, so selection for stainless steel should be verified with process testing or technical consultation. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools: The Walter AG (brand: Walter Tools) with headquarters in Tübingen is a leading manufacturer of precision metalworking tools and is part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
LDMT08T204R-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, versatile P/M/S suitability and a stable cutting geometry for predictable milling results and reduced tool changes. Order the LDMT08T204R-D51 WSP45G directly via Metav Werkzeuge or consult our specialists for cutting data and availability. LDMT08T204R-D51 WSP45G — Walter Tools milling indexable insert, Tiger·tec Gold, P/M/S A LDMT08T204R-D51 WSP45G indexable milling insert designed for versatile milling work in Stahl, rostfreier Stahl and high-temperature alloys. Tiger·tec Gold coating for longer tool life Suitable for Stahl / rostfreier Stahl / high-temp alloys 15° clearance angle for reliable cutting 0.4 mm corner radius for consistent finishes Longer uptime through advanced coating technology The insert uses the Tiger·tec Gold coating technology applied to a PVD-coated carbide substrate, which improves wear resistance and temperature tolerance during milling. This coating combination supports stable edge life under cyclic thermal loads, reducing unscheduled tool changes and contributing to a more consistent production flow. For process engineers, the result is improved overall equipment effectiveness and fewer interruptions in machining cycles. Broad material range for flexible production planning Designed for use across the ISO groups P / M / S, the grade addresses typical challenges when machining Stahl (P), rostfreier Stahl (M) and heat-resistant superalloys or titanium (S). The material designation means the insert is tuned for secure chip formation in steels, controlled edge behaviour with stainless grades and enhanced thermal stability for difficult-to-cut alloys. This versatility simplifies tooling inventories and supports flexible job scheduling across mixed-production environments. Geometry tuned for repeatable surface quality The rectangular plate format with a 0.4 mm corner radius and a 15° free angle offers a balance between cutting stability and surface finish. The D51 chipbreaker promotes controlled chip evacuation during shoulder and face milling, while the T2 plate thickness enhances mechanical stiffness. Tolerance class M ensures consistent dimensions between inserts, reducing setup variation and enabling predictable part quality over longer runs. Productivity gains in typical milling applications As a member of the Tiger·tec Gold series, this insert is particularly effective for general and finishing milling operations where a dependable edge and good surface result are required. The WSP45G grade emphasises toughness and multi‑purpose performance, helping to avoid built-up edge and maintain cutting stability. Integrating this insert into a production line can lead to measurable time savings per component and lower tool consumption across common milling tasks. Contact Metav Werkzeuge to discuss how the Tiger·tec Gold LDMT08T204R-D51 WSP45G can improve process stability and to request tailored cutting parameters and stock information Technical Data Article number: LDMT08T204R-D51-WSP45G-WALTER Designation: LDMT08T204R-D51 WSP45G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Grade / series: WSP45G / Tiger-tec Gold Facts Free angle: 15° Corner radius: 0.4 mm Plate size: 08 Plate thickness: T2 Chipbreaker: D51 Tolerance class: M Execution: T Special features Coating technology: Tiger·tec Gold (PVD) Substrate: coated carbide (beschichtetes Hartmetall) Material suitability: P / M / S (Stahl / rostfreier Stahl / superalloys & titanium) Plate form: Rechteck Sortenbeschreibung: tough, versatile PVD grade for milling applications FAQ Is this insert suitable for machining stainless steels? Yes. The LDMT08T204R-D51 WSP45G insert is specified for rostfreier Stahl (M group) and offers chip control and edge stability for stainless applications. What does the designation WSP45G indicate? WSP45G is the Walter Tools grade within the Tiger·tec Gold series, a PVD-coated carbide formulation optimised for toughness and versatile milling performance across P/M/S workpieces. Which machining tasks are best for this indexable plate? The plate is intended for general milling and finishing operations; its geometry and D51 chipbreaker suit shoulder miling, face milling and applications requiring consistent surface quality. How does the Tiger·tec Gold coating improve results? Tiger·tec Gold enhances wear resistance and heat tolerance, stabilising the cutting edge under fluctuating temperatures and extending useful tool life compared with uncoated grades. What is the significance of the 0.4 mm corner radius and 15° free angle? A 0.4 mm corner radius balances edge strength and surface finish, while the 15° clearance angle reduces rubbing and helps maintain cutting stability during interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are cited solely for clarification; there is no affiliation between our company and the mentioned brands. The item offered is original, factory-new product from the manufacturer. The Walter brand is referenced as the producer of the described insert.
LDMT08T204R-D57 WKP25S Wendeplatten - Walter Tools
Benefit from a high-performance cutting grade and a wear-resistant coating that together deliver reliable edge life and consistent chip control, improving throughput in mixed machining of steel and cast iron; order directly via Metav Werkzeuge or consult the team for application support. LDMT08T204R-D57 WKP25S Fräswendeschneidplatte — Tiger·tec Silver grade for steel and cast iron by Walter Tools The LDMT08T204R-D57 WKP25S is a rectangular indexable milling insert designed for productive machining of steel and cast iron in a wide range of milling operations. Tiger·tec Silver coating for wear resistance Grade WKP25S for steel and cast iron 15° relief angle for stable cutting 0.4 mm corner radius for surface quality Chipbreaker D57 for consistent chip control Reliable grade and coating for mixed production environments The combination of the WKP25S grade and the Tiger·tec Silver coating is engineered for demanding applications in ISO groups P (steel) and K (cast iron). This coated carbide composition promotes stable flank and crater behaviour, reducing flank wear during interrupted cuts typical of cast components. Explaining the benefit in practical terms: the coated substrate reduces heat- and abrasion-related degradation so that tool changes are less frequent, which supports higher machine utilisation and lowers per-part tooling cost. The insert designation in the LD-series informs fixture and toolholder choices for integration into existing milling cutters. Geometry and edge specification that improve workpiece finish The rectangular form combined with a 0.4 mm corner radius enhances surface finish and improves edge strength during heavy cuts. The 15° relief angle helps to maintain cutting stability by reducing the contact stress on the leading edge, which is particularly valuable when machining interrupted or rough cast surfaces. The chipbreaker D57 is designed to shape and evacuate chips consistently, helping to avoid re-cutting and to protect the fresh cutting edge. These geometry choices translate into fewer rework cycles and a steadier surface quality, especially in production runs where repeatability matters. Mechanical tolerance and size details that aid process control Delivered to a tolerance class M, the insert ensures dimensional consistency that simplifies indexable tooling set-up and repeatable clamping. The plate code 08 together with thickness code T2 indicates form and strength suitable for medium to heavy milling passes in robust cutter bodies. Consistent tolerances and standardised form factors reduce adjustment time at the machine and make it easier to predict tool life for production planning. Where tighter tolerances are required, the stability of the grade and coating still supports predictable performance across batches. Practical application and selection guidance For mixed workshops that process both unalloyed or alloyed steels and a variety of cast irons, this insert class provides a pragmatic compromise between edge toughness and abrasion resistance. When selecting an insert for a specific cutter, consider the intended depth of cut and the clamping system of the cutter body; the rectangular shape offers straightforward positioning and repeat indexing. If necessary, Metav Werkzeuge can advise on matching cutter bodies and recommended feeds for the grade to achieve the desired balance between productivity and surface integrity. Contact Metav Werkzeuge for tailored process recommendations and to source the Walter Tools LDMT08T204R-D57 WKP25S insert for your milling operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LDMT08T204R-D57-WKP25S-WALTER SKU: LDMT08T204R-D57-WKP25S-WALTER Product type: Fräswendeschneidplatte Designation: LDMT08T204R-D57 WKP25S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP25S Form: Rechteck Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Chipbreaker: D57 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Silver Material suitability: P (steel) and K (cast iron) Material of insert: coated carbide Typical applications: general milling of steel and cast iron Indexable insert geometry for repeatable positioning FAQ What materials is this insert suitable for? This insert is designed for machining steel and cast iron; the WKP25S grade and the Tiger·tec Silver coating provide a balance of toughness and abrasion resistance for ISO groups P and K. How does the chipbreaker D57 affect performance? The D57 chipbreaker shapes and evacuates chips to reduce re-cutting and promote a stable cutting process, which helps maintain consistent edge life and surface finish. What are the key geometric specifications to consider? Important specifications include the 15° relief angle, the 0.4 mm corner radius, the rectangular form and the plate size code 08 — these determine edge strength, contact geometry and suitability for specific cutter bodies. Is this insert suitable for high-feed or heavy-roughing operations? The combination of a sturdy rectangular form, T2 thickness and the WKP25S grade makes the insert appropriate for robust milling passes; selection should be confirmed against the cutter body and the intended depth of cut. How is the insert identified for reordering? Use the full designation LDMT08T204R-D57 WKP25S or the SKU LDMT08T204R-D57-WKP25S-WALTER when reordering to ensure the correct grade, chipbreaker and geometry are supplied. Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product from the manufacturer. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
LDMT08T204R-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust WKP35G grade and precise geometry for consistent chip control and prolonged tool life; order the insert via Metav Werkzeuge or request advice from our consultants for integration into high-productivity milling processes. LDMT08T204R-D57 WKP35G rectangular milling insert — Walter Tools, Tiger·tec Gold, 15° relief The LDMT08T204R-D57 WKP35G is a rectangular indexable milling insert designed for productive machining of steel and cast iron in demanding industrial milling operations. Tiger·tec Gold coated carbide WKP35G Rectangular geometry with 0.4 mm corner radius 15° relief angle for secure chip flow Chipbreaker D57 for reliable chip control Higher productivity through advanced coating and grade The combination of the Tiger·tec Gold coating with the WKP35G carbide grade yields a resilient cutting edge that sustains higher cutting speeds and extended tool life in mixed-production environments. The coating reduces abrasive wear and thermal load, which helps maintain a stable cutting edge and consistent component quality. This results in fewer insert changes, lower machine downtime and improved overall machining throughput. Stable chip formation and predictable machining results The rectangular shape and the integrated chipbreaker D57 provide targeted chip formation and evacuation, minimising interruptions from entangled or hot chips. The small 0.4 mm corner radius supports precise profile control while the 15° relief promotes favourable cutting engagement and reduces edge chipping. These geometric features translate into reliable surface finish and repeatable process windows for series production. Optimised for steel and cast iron applications Designed for ISO material groups P and K, the grade and geometry specifically address the thermal behaviour and chip characteristics of steel and cast iron. The coated carbide substrate resists abrasive wear encountered with grey and nodular cast irons, while the combination of coating and substrate hardness ensures acceptable performance across a broad range of steels. This makes the insert suitable for workshops requiring versatile, production-ready tooling. Seamless integration and handling benefits in the tool chain The ISO designation and standard dimensions support straightforward insertion into compatible milling cutters and holders, simplifying tool management. With tolerance class M and a standard rectangular form, the component enables predictable seating and repeatable positioning in multi-tooth cutters. The insert’s design supports quick index changes and consistent allocation within a tooling system, contributing to efficient set-up routines and overall process security. For procurement or detailed application advice on the Tiger·tec Gold WKP35G inserts, contact Metav Werkzeuge to discuss suitable cutter bodies and batch supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LDMT08T204R-D57-WKP35G-WALTER Label: Fräswendeschneidplatte LDMT08T204R-D57 WKP35G Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger-tec Gold Grade: WKP35G Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Gold Material/base: coated carbide Geometry: rectangular Chipbreaker: D57 Material suitability: steel (P), cast iron (K) Designation: LDMT08T204R-D57 WKP35G FAQ What materials is this insert suitable for? The insert is designed for machining steel and cast iron (ISO groups P and K); the WKP35G grade and Tiger·tec Gold coating address typical chip formation and abrasive wear of these materials. How does the chipbreaker D57 improve performance? Chipbreaker D57 controls chip shape and evacuation, reducing the risk of chip entanglement and improving surface consistency when the insert is used in appropriate milling geometries. Is the LDMT08T204R-D57 WKP35G compatible with standard cutter bodies? The ISO designation and rectangular form allow mounting in standard cutter bodies that accept LDMT-style inserts; ensure the holder matches the plate thickness T2 and seating geometry. What production benefits can be expected from the Tiger·tec Gold coating? The Tiger·tec Gold coating enhances wear resistance and thermal stability, which contributes to longer intervals between index changes and more predictable tool life under mixed-production conditions. Does the insert require special handling during indexing? Standard handling procedures for carbide inserts apply; the rectangular form and tolerance class M permit repeatable seating—ensure clean seating surfaces and correct screw torque for secure fixation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
LDMT08T204R-D57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the WKP35S grade and Tiger·tec Silver technology to achieve reliable, long‑life performance when machining steel and cast iron; the robust D57 chipbreaker and 15° relief angle ensure steady chip control and reduced rework. Order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. LDMT08T204R-D57 WKP35S indexable milling insert — Tiger·tec Silver, for steel and cast iron — Walter Tools The LDMT08T204R-D57 WKP35S is an indexable milling insert designed for versatile face and shoulder milling, optimised for efficient material removal from steel and cast iron. Tiger·tec Silver coating for longer tool life WKP35S grade for steel and cast iron applications D57 chipbreaker for improved chip control 15° relief angle improves cutting engagement Rectangular form with 0.4 mm corner radius High‑productivity machining and extended tool life The Tiger·tec Silver coating combined with the WKP35S coated carbide provides a balance of wear resistance and toughness that supports high productivity in mixed production environments. The grade is developed for the thermal and mechanical demands of steel and cast iron, reducing flank wear and maintaining a sharp edge over longer tool paths. This translates directly into fewer indexings, longer tool cycles and more consistent output per insert, helping to lower overall machining cost without sacrificing component quality. Predictable chip formation and surface quality Thanks to the D57 chipbreaker geometry and a 15° relief angle, the insert offers controlled chip formation and stable cutting forces during interrupted and continuous cuts. The modest 0.4 mm corner radius assists in producing a reliable surface finish while still permitting robust engagement for heavier passes. The insert is specified for ISO P and K material groups—P for steel and K for cast iron—so the tooling behaviour matches the typical chip shapes and abrasiveness encountered in these materials, reducing burr formation and rework. Seamless integration into process chains and consistent results The rectangular plate form and tolerance class M ensure consistent seating and repeatable positioning in standard cutter bodies, supporting reproducible results across batches. With a plate thickness designated T2 and the LDMT geometry, the insert accommodates common clamping systems while delivering good axial and radial stability. The combination of grade and geometry from the Tiger·tec Silver series is aimed at shops that require versatile inserts that perform reliably across a range of steels and cast irons without frequent tool changes. Contact Metav Werkzeuge today for tailored application advice or availability for Walter Tools inserts and to ensure the chosen grade and geometry match the intended machining strategy Technical Data Article number: LDMT08T204R-D57-WKP35S-WALTER SKU: LDMT08T204R-D57-WKP35S-WALTER Designation: LDMT08T204R-D57 WKP35S Series: Tiger·tec Silver Grade: WKP35S Core specifications Chipbreaker: D57 Corner radius: 0.4 mm Relief angle: 15° Plate size: 08 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Silver Material: coated carbide (WKP35S) Suitable for: P / K (steel / cast iron) Plate form: Rectangular Typical application: face and shoulder milling FAQ Which materials are recommended for this insert? The WKP35S grade in the LDMT08T204R‑D57 insert is formulated for steel (ISO P) and cast iron (ISO K) machining, matching the thermal and abrasive demands of both groups. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and reliable evacuation, so the insert maintains process stability during both continuous and interrupted cuts. Is the geometry suitable for heavier cuts and finishing passes? Yes; the rectangular form with a 0.4 mm corner radius and 15° relief angle delivers the rigidity needed for heavier passes while still allowing acceptable surface quality for finishing when used with appropriate parameters. What does tolerance class M mean for benching and clamping? Tolerance class M indicates standard manufacturing tolerances that ensure repeatable seating and positioning in compatible cutter bodies, supporting consistent part-to-part accuracy. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanation only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
LDMT08T204R-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold PVD coating and the WSP45G grade for reliable edge stability and versatile machining of steel, stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our technical team for process optimisation. LDMT08T204R-D57 WSP45G — Milling insert, Tiger‑tec Gold, 15° relief (Walter Tools) The LDMT08T204R-D57 WSP45G is a rectangular milling indexable insert designed for versatile face and shoulder milling across a wide range of alloys Tiger‑tec Gold PVD coating for edge stability Grade WSP45G for versatile P/M/S machining 0.4 mm corner radius for consistent surface finish 15° relief angle for secure chip control High productivity for mixed production runs The combination of the Tiger‑tec Gold coating and the WSP45G grade yields a PVD-coated carbide geometry that balances wear resistance with toughness. This results in stable cutting edges during transient heat peaks and fluctuating loads typical in mixed-production environments. For manufacturing operations that require consistent surface quality across batch changes, the insert offers improved tool life and fewer indexings, thereby supporting higher machine uptime and lower tooling costs. Stable cutting performance and surface quality A corner radius of 0.4 mm and a 15° relief angle work together to reduce cutting-edge chipping and to produce repeatable surface finishes. The relief angle (the clearance behind the cutting edge) prevents rubbing and excessive heat at the flank, while the modest corner radius helps maintain strength at the edge without sacrificing finish quality. The integrated D57 chipbreaker supports controlled chip formation, reducing the risk of re-cutting and facilitating predictable machining when finishing or semi-finishing components. Practical machining guidance and process security The insert is specifically suited to P/M/S applications: tools for machining steel, stainless steel and high-temperature alloys such as superalloys and titanium. The tolerance class M and plate code 08/T2 ensure consistent seat fit and repeatable positioning in standard milling cutters. For new setups, start with conservative feeds and speeds and increase until the desired balance between tool life and productivity is reached. If parameter tuning is required for specific materials or part geometries, technical consultation is available to tailor cutter selection and cutting data. Discuss Walter Tools' Tiger‑tec Gold solutions with Metav Werkzeuge for tailored machining recommendations—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LDMT08T204R-D57-WSP45G-WALTER Name: Fräswendeschneidplatte LDMT08T204R-D57 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Thickness: T2 Tolerance class: M Special features Grade: WSP45G (PVD-coated carbide) Chipbreaker: D57 Plate form: rectangular Material suitability: steel, stainless steel, S (superalloys and titanium) FAQ What materials is this insert suitable for? The LDMT08T204R-D57 WSP45G is suitable for machining steel, stainless steel and high-temperature alloys (S), thanks to the WSP45G grade and Tiger‑tec Gold coating. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold enhances edge stability and wear resistance on the LDMT08T204R-D57 WSP45G, which supports longer tool life and more consistent surface quality in mixed-material production. Which chipbreaker should be expected with this insert? This insert features the D57 chipbreaker, designed to promote controlled chip formation and improved chip evacuation in face and shoulder milling operations. What does tolerance class M imply for assembly? Tolerance class M indicates consistent manufacturing tolerances for repeatable seating and secure clamping in compatible milling cutters fitted for the LDMT08T204R-D57 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not indicate any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, factory-new goods of the manufacturer Walter Tools.
LDMT08T204R-F57 WKP25S Wendeplatten - Walter Tools
Combine the Tiger‑tec Silver coating with the WKP25S grade and the 15° clearance geometry for consistent, productive milling of steel and cast iron; order the LDMT08T204R-F57 WKP25S milling insert directly via Metav Werkzeuge or consult the specialist advisors for application support. LDMT08T204R-F57 WKP25S Milling insert, Tiger‑tec Silver, 15° clearance — Walter Tools A LDMT08T204R-F57 WKP25S milling insert engineered for productive face and shoulder milling of steel and cast iron in general machining applications. Tiger‑tec Silver coating for process reliability WKP25S grade optimised for steel and cast iron 15° clearance angle for reduced cutting forces Consistent machining performance for steel and cast iron The combination of the Tiger‑tec Silver coating and the WKP25S grade provides a durable, wear-resistant cutting edge designed specifically for the thermal and mechanical demands of machining steel (ISO group P) and cast iron (ISO group K). The coating reduces abrasive wear and supports stable chip formation under typical milling loads, which leads to fewer tool changes and higher machine utilisation. For operations that require predictable tool life, the coated carbide grade delivers repeatable results and improved process security compared with uncoated grades. Geometry that improves stability and surface quality A 15° clearance angle and a 0.4 mm corner radius control contact conditions between tool and workpiece, reducing built-up edge and vibration during face milling and shoulder cuts. The rectangular plate form with the insert size 08 offers a robust support geometry for heavy engaged widths, while the chipbreaker F57 helps produce controllable chips and consistent surface finish. These geometric choices translate into reduced rework and a more reliable production flow when paired with suitable feeds and speeds. Practical benefits for the workshop and production planning The insert is supplied as a coated carbide grade (WKP25S) within the Tiger‑tec Silver series, making it suitable for mixed production environments where operators need a single, versatile grade for both steel and cast iron. Reduced downtime from tool wear and the improved repeatability of the cutting edge support lean manufacturing goals and facilitate process standardisation. For shops using CNC milling strategies, the insert’s balanced design contributes to predictable cycle times and easier tool inventory management. For application advice on Walter Tools inserts such as the LDMT08T204R-F57 WKP25S or to discuss suitable cutting data, contact Metav Werkzeuge for expert consultation and fast supply: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: LDMT08T204R-F57-WKP25S-WALTER Designation: LDMT08T204R-F57 WKP25S Manufacturer: Walter Tools Product type: Milling insert Facts Clearance angle: 15° Corner radius: 0.4 mm Insert size: 08 Thickness: T2 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: F57 Plate form: Rectangular Suitable for: Steel (P), Cast iron (K) FAQ What materials is this insert intended for? The LDMT08T204R-F57 WKP25S insert is specified for steel (ISO group P) and cast iron (ISO group K), benefiting from the Tiger‑tec Silver coating and the WKP25S grade. How does the Tiger‑tec Silver coating help in milling? The Tiger‑tec Silver coating improves wear resistance and heat management during milling, which promotes stable chip formation and extends the effective tool life of the insert. Which cutting geometry provides improved stability? The 15° clearance angle together with the 0.4 mm corner radius and chipbreaker F57 improve contact conditions and chip control, resulting in better stability and surface finish in shoulder and face milling. Is this insert suitable for heavy-duty milling operations? The rectangular plate form and the insert size 08 are designed to deliver solid support under moderate to heavy engaged widths; appropriate cutting data should be selected to match machine and fixture rigidity. Can this grade be used for mixed-series production runs? Yes, the WKP25S grade within the Tiger‑tec Silver family is intended for versatile use across steel and cast iron applications, making it suitable for workshops running mixed production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LDMT08T204R-F57 WKP35G Wendeplatten - Walter Tools
Benefit from high productivity and reliable chip control through the combination of the WKP35G grade and Tiger‑tec Gold technology with the F57 chipbreaker; order the insert directly via Metav Werkzeuge or contact our consultants for tailored milling solutions. LDMT08T204R-F57 WKP35G Milling indexable insert – Tiger‑tec Gold (Walter Tools) LDMT08T204R-F57 WKP35G is a rectangular milling indexable insert designed for productive machining of steel and cast iron, offering Tiger‑tec Gold coating and a 15° clearance angle for stable cutting performance. Tiger‑tec Gold coating for long life WKP35G grade for steel and cast iron F57 chipbreaker for consistent chips 15° clearance angle, 0.4 mm corner radius Increased productivity through advanced grade and coating The combination of the WKP35G carbide grade and Tiger‑tec Gold coating is aimed at enhancing tool life and process stability in heavy milling tasks. The coated cemented carbide substrate provides improved resistance to abrasive wear and thermal loading, which translates into longer tool life and fewer tool changes. For production environments this means reduced downtime and a more consistent output rate, particularly when machining group P (steel) and group K (cast iron) materials according to ISO 513. The insert’s design supports high metal removal rates while maintaining dimensional stability. Consistent chip formation and surface quality Equipped with the F57 chipbreaker and a 15° relief angle, the insert produces predictable chip shapes that aid evacuation and reduce the risk of recutting. The 0.4 mm corner radius contributes to improved edge strength while helping to achieve a reliable surface finish with lower vibration. These technical traits reduce secondary operations and rework, supporting tighter production schedules and improved first-pass yield. Clear explanation: the chipbreaker geometry controls how the material fractures and evacuates, which directly affects tool life and component quality. Robust clamping and repeatable performance The rectangular plate form and the T2 thickness provide a stable platform in the toolholder, while the tolerance class M ensures repeatability across indexings. This mechanical stability minimises unwanted movement at the cutting edge and supports consistent cutting forces, which in turn extends the service intervals of both insert and holder. The result is an overall improvement in process economics: fewer interruptions for insert changes and more predictable maintenance cycles. The plate size designation and geometry suit a broad range of milling cutters that accept LDMT‑style inserts. Practical application notes and manufacturer reliability Designed principally for machining steel and cast iron, the insert is compliant with the material groups P and K and is therefore suitable for a wide spectrum of workshop and production tasks. Operators should select appropriate speeds and feeds based on workpiece grade and machine capability; the insert’s coated surface helps to mitigate built‑up edge and thermal wear under moderate to high cutting conditions. Walter Tools’ reputation for consistent edge quality and productivity contributes to predictable process outcomes and reliable tool life in daily use. Contact Metav Werkzeuge for expert advice on Walter Tools Tiger‑tec Gold inserts — phone +49 2822 7131930, e-mail info@metav-werkzeuge.com Technical data Article number: LDMT08T204R-F57-WKP35G-WALTER Designation: LDMT08T204R-F57 WKP35G Manufacturer: Walter Tools Product type: Milling indexable insert Core specifications Clearance angle: 15° Corner radius: 0.4 mm Plate size: 08 Thickness: T2 Tolerance class: M Features & applications Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F57 Plate form: Rectangular Workpiece groups: P / K (steel and cast iron) Suitable for productive milling operations FAQ What materials is this insert suitable for? The LDMT08T204R‑F57 WKP35G insert is intended for workpiece groups P and K, making it suitable for machining steel and cast iron as specified by ISO 513. How does the Tiger‑tec Gold coating benefit milling operations? The Tiger‑tec Gold coating on the WKP35G grade increases resistance to abrasive and thermal wear, extending insert life and maintaining cutting edge integrity under demanding conditions. What effect does the F57 chipbreaker have on machining? The F57 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip interference during continuous milling. Is the insert compatible with standard LDMT indexable cutter bodies? The LDMT08T204R‑F57 geometry follows common LDMT mounting standards; compatibility depends on the cutter body accepting LDMT‑style rectangular inserts with T2 thickness. How does the corner radius influence performance? A 0.4 mm corner radius balances edge strength and cutting forces, offering improved robustness and a favourable surface quality for roughing and semi‑finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanation only. There is no affiliation between our company and the named brands. The offered article is original factory‑new goods of Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com