LNMU100508-F57T WKP35S Wendeplatten - Walter Tools
Benefit from durable, high‑performance milling thanks to the combination of a Tiger·tec Silver coating and the wear‑resistant WKP35S grade; the rectangular geometry with 0° negative rake and a 0.8 mm corner radius provides stable cutting and predictable tool life — order the insert via Metav Werkzeuge or consult their specialists for selection support. LNMU100508-F57T WKP35S Fräswendeschneidplatte (milling indexable insert) by Walter Tools — Tiger·tec Silver, for steel and cast iron The LNMU100508-F57T WKP35S is a rectangular milling indexable insert engineered for efficient machining of steel and cast iron, combining a coated carbide grade with a purpose‑built chipformer for reliable metal removal. Tiger·tec Silver coating for high wear resistance Rectangular insert with 0° negative rake Corner radius 0.8 mm for stable cutting Suitable for steel and cast iron machining High productivity through a wear‑resistant coated grade The Tiger·tec Silver series delivers an optimised combination of coating technology and substrate, giving the insert a coated carbide surface that resists abrasive wear and thermal loading. The WKP35S grade is tailored for the demands of machining steel and cast iron, providing consistent flank life and reduced variation between edges. For production environments, this translates into fewer indexings and longer tool cycles, which directly improves machining throughput and lowers per‑part tooling costs. The design reduces thermal softening at the cutting edge and supports steady performance under common shop conditions. Stable geometry for predictable surface quality and tool life The rectangular form with a 0° negative rake and a 0.8 mm corner radius improves edge strength and dampens vibrations during intermittent or heavy cuts. The F57T chipbreaker manages chip formation for typical steel and cast iron chips, promoting uninterrupted evacuation and minimising rework from built‑up edge or surface blemishes. This geometry supports a repeatable surface finish and reduces the likelihood of edge chipping, ensuring that each indexed edge delivers predictable results and supports process stabilisation on the shop floor. Practical application scope and handling advantages Designed to fit standard milling toolholders that accept this indexable format, the insert is suitable where a balance of robustness and cutting performance is required. The combination of grade and chipbreaker makes it particularly effective in mixed production runs that include both unalloyed and alloyed steels as well as common cast iron types. Replacement is straightforward: secure clamping and correct seat contact are the main prerequisites for achieving the rated performance. Where material standards are specified according to ISO 513, this insert covers the P and K groups, ensuring clarity when selecting tooling for specific workpiece families. For reliable, high‑throughput milling with Walter Tools' Tiger·tec Silver technology, contact Metav Werkzeuge for tailored advice and availability — Metav Werkzeuge can assist with application matching and delivery options. Technical Data Article number: LNMU100508-F57T-WKP35S-WALTER Designation: LNMU100508-F57T WKP35S Series: Tiger-tec Silver Grade: WKP35S Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Material classification: P / K Facts Plate size: 10 Plate thickness: 05 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Chipbreaker: F57T Form: Rectangular Execution: U Special features Coated carbide grade (Tiger·tec Silver) Suitable for steel machining (P) Suitable for cast iron machining (K) Stable cutting edge geometry for improved tool life Designed for productive milling operations FAQ Which materials is this insert designed to machine? The insert is specified for machining steel (P) and cast iron (K) according to the grade definition for the WKP35S variant. What does WKP35S indicate for performance? WKP35S denotes Walter Tools' carbide grade within the Tiger·tec Silver family, optimised for wear resistance and stable chip control in steel and cast iron applications. How does the 0° negative rake affect cutting? A 0° negative rake increases edge robustness and reduces the risk of chipping under heavy loads, which benefits interrupted cuts and aggressive milling passes. Is the F57T chipbreaker suitable for mixed production runs? Yes, the F57T chipbreaker is engineered to produce short, controlled chips in both steel and cast iron, aiding chip evacuation and surface consistency in mixed runs. What is the exact product identifier for ordering? Order using the SKU: LNMU100508-F57T-WKP35S-WALTER to ensure the correct Tiger·tec Silver insert and grade are supplied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
LNMU100508-F57T WPP35G Wendeplatten - Walter Tools
Benefit from a combination of extended tool life from the Tiger‑tec Gold coating, dependable chip control via the F57T chipbreaker, and stable cutting geometry for steel machining; order the LNMU100508-F57T WPP35G through Metav Werkzeuge or consult our specialists for application advice. LNMU100508-F57T WPP35G — Milling insert, Tiger‑tec Gold (Walter Tools) The LNMU100508-F57G WPP35G is a rectangular milling indexable insert designed for robust steel machining, offering a Tiger‑tec Gold coating and a 0° negative clearance for reliable cutting performance. Tiger‑tec Gold coating for extended tool life Optimised for machining steel (ISO P) Rectangular 10 mm format, 0.8 mm corner radius 0° negative clearance for stable cutting Higher productivity with predictable performance The insert combines Tiger‑tec Gold technology with a WPP35G grade to deliver improved wear resistance and reproducible results when machining steels (group ISO P). The coated carbide chemistry reduces flank wear and supports longer cutting cycles, which translates into fewer tool changes and increased machine uptime. For production environments that value consistent surface finish and stable removal rates, this insert reduces unplanned interruptions and helps maintain process capability over longer runs. Precise geometry for reliable milling cycles The rectangular format and a corner radius 0.8 mm give a robust cutting edge that withstands intermittent loads while maintaining a predictable profile. The 0° negative clearance stabilises engagement and reduces the tendency for chatter in many milling operations, which benefits both slotting and peripheral cuts. Together, these geometric features support repeatable component accuracy and better tool life management, particularly under the thermal and mechanical conditions typical when machining steels. Versatile grade selection for varied steel applications WPP35G is engineered as a balanced Walter grade that covers a spectrum of steel machining scenarios, from wear‑resistant to tougher conditions. The integrated chipbreaker F57T is optimised for controlled chip formation in steel, aiding evacuation and reducing the risk of built-up edge. This combination makes the insert suitable for general‑purpose milling tasks where a single grade must handle a range of feeds, depths and material batches, simplifying tool stocking and process planning. Practical integration and handling in the workshop The insert is supplied in the LNMU100508-F57T format with thickness designation 05 and execution U, so it fits established milling holders and clamping systems designed for rectangular inserts. Handling and indexation are straightforward; the chipbreaker and coating require no special coolant strategy beyond standard practice for steel. When replacing inserts, monitoring edge condition rather than strict time intervals often yields the best economy, because the Tiger‑tec Gold coating delays progressive wear while maintaining cutting reliability. Contact Metav Werkzeuge for tailored application advice and delivery options for the Walter Tools LNMU100508-F57T WPP35G — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: LNMU100508-F57T-WPP35G-WALTER Article: LNMU100508-F57T WPP35G Label: Fräswendeschneidplatte LNMU100508-F57T WPP35G Walter Tools Manufacturer: Walter Tools Facts Size: 10 mm Corner radius: 0.8 mm Thickness designation: 05 Clearance angle: 0° (negative) Tolerance class: M Series: Tiger‑tec Gold Special features Coating: Tiger‑tec Gold Grade: WPP35G Chipbreaker: F57T Material application: Steel (ISO P) Insert shape: Rectangular Execution: U FAQ What materials is this insert designed for? The LNMU100508-F57T WPP35G is formulated for machining steels (ISO P); the Tiger‑tec Gold coating and chipbreaker F57T are tuned for typical heat and chip conditions when cutting steel. How does the Tiger‑tec Gold coating benefit cutting performance? Tiger‑tec Gold on the WPP35G grade reduces flank wear and stabilises the cutting edge, which in the LNMU100508-F57T insert results in longer productive tool life and more consistent surface quality. What does the 0° negative clearance mean for milling operations? A 0° negative clearance on this insert helps maintain a stable cutting engagement and reduces vibration in many milling configurations, contributing to improved dimensional repeatability during runs. Is the chipbreaker suitable for heavy chip loads? The F57T chipbreaker of the WPP35G grade promotes stable chip control in steel machining and is intended to manage a broad range of chip volumes encountered in general milling applications. Which holder types accept this rectangular insert? The LNMU100508-F57T geometry and execution U correspond to standard rectangular insert holders used in milling applications, allowing straightforward integration into common milling tool systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the referenced brands. The offered item is an original, factory‑new product of the manufacturer.
LNMU100508-F57T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, optimised chip control and a robust negative-rake geometry for consistent machining of stainless steels and exotic alloys. Order the LNMU100508-F57T WSM35G directly via Metav Werkzeuge or ask our consultants if needed. LNMU100508-F57T WSM35G indexable milling insert, Tiger·tec Gold coating, for stainless steels and superalloys — Walter Tools The LNMU100508-F57T WSM35G is a rectangular indexable milling insert developed for demanding machining of stainless steels and heat-resistant superalloys, offering stable cutting edges and improved process security. Tiger·tec Gold coated carbide grade Optimised F57T chipbreaker for reliable chips 0° negative rake for increased cutting edge strength Rectangular 10 size with 0.8 mm corner radius Greater process security when machining stainless steels and superalloys The Tiger·tec Gold coating combined with a coated carbide base delivers improved wear resistance and temperature tolerance, which directly benefits throughput when tackling stainless steels and heat-resistant materials. By selecting a grade designed for materials in ISO group M and S, this insert reduces the tendency for built-up edge and supports a predictable tool life. The result is fewer unscheduled tool changes and steadier production, making milling operations more economical and reliable. Precision geometry that stabilises chip formation With the F57T chipbreaker and a rectilinear geometry, chip control is prioritised to avoid entanglement and ensure uniform evacuation. The 0° negative rake increases mechanical strength at the cutting edge, which is particularly beneficial when feeds fluctuate or interrupted cuts occur. Operators gain consistent surface finish and dimensional stability with a geometry that supports controlled chip flow and reduces vibration-related defects. Coating and grade benefits for productive machining The coating technology enhances the insert’s resistance to thermal and adhesive wear, key factors when machining materials that generate heat at the cutting zone. The combination of a coated carbide substrate and the Tiger·tec Gold surface treatment supports higher cutting speeds and extended edge life, translating into improved productivity and lower tooling cost per component. For shops pursuing efficient, repeatable milling of demanding alloys, this cutting grade balances performance and economy. Practical handling and compatibility in production environments The insert’s rectangular form and defined corner radius of 0.8 mm offer predictable edge engagement and simplified indexing on compatible toolholders. Identifiable geometry and a standardised designation ease storage and tool management across production lines. When paired with suitable holders, the insert assists in achieving consistent cycle times and reduces the need for complex process adjustments, helping machine shops maintain steady output. Contact Metav Werkzeuge to discuss Walter Tools’ LNMU100508-F57T WSM35G and identify the right holder and cutting data for specific stainless steel or superalloy applications — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number / SKU: LNMU100508-F57T-WSM35G-WALTER Designation: LNMU100508-F57T WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Plate size: 10 Thickness: 05 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Designs / Special features Grade: WSM35G Chipbreaker: F57T Shape: Rectangular Execution: U Material applicability: S / M (superalloys/titanium and stainless steels) Coating: Tiger·tec Gold FAQ What materials is this insert suitable for? The LNMU100508-F57T WSM35G is specified for ISO groups M and S, making it suitable for stainless steels and heat-resistant superalloys, as implemented by Walter Tools in the Tiger·tec Gold range. How does the 0° negative rake affect cutting performance? A 0° negative rake increases cutting edge strength and resistance to chipping; the LNMU100508-F57T geometry thereby supports interrupted cuts and tougher feeds common in stainless steel and superalloy milling. What benefit does the F57T chipbreaker provide? The F57T chipbreaker is designed to produce short, controllable chips for safer evacuation and reduced re-cutting, which improves surface finish and tool life when machining difficult-to-cut materials. Can this insert be used for finishing operations? Yes, when paired with appropriate toolholder settings and cutting parameters, the WSM35G grade can achieve good surface quality while maintaining edge stability for final passes. Is the insert compatible with standard Walter Tools milling holders? The LNMU100508-F57T form follows common indexable insert conventions; compatibility should be confirmed with the chosen Walter Tools milling holder specification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; www.walter-tools.com Walter AG (brand: Walter Tools) belongs to the worldwide leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanation only and do not imply any affiliation between our company and the trademark owners.
LNMU100508-F57T WSP45G Wendeplatten - Walter Tools
Die bewährte Kombination aus Tiger‑tec Gold‑Beschichtung und gezielter Geometrie sorgt für hohe Prozesssicherheit und langlebige Schneidkanten. Profitieren von stabiler Spanbildung bei der Bearbeitung von Stahl, rostfreiem Stahl und hitzebeständigen Legierungen; Bestellung und technische Beratung direkt über Metav Werkzeuge möglich. LNMU100508-F57T WSP45G – Milling insert (Tiger‑tec Gold, coated carbide) by Walter Tools The LNMU100508-F57T WSP45G is a rectangular milling indexable insert designed for robust milling in steels, stainless steels and heat‑resistant alloys LNMU100508-F57T WSP45G milling insert by Walter Tools Tiger‑tec Gold PVD coating for robust wear resistance Suitable for steel, stainless steel and high‑temp alloys Rectangle form, 0.8 mm corner radius, 0° negative rake Consistent performance for productive milling operations The insert combines a Tiger‑tec Gold coating with a PVD‑hardened substrate to deliver stable chip control and extended tool life under typical milling loads. The insert is developed for versatile use across the ISO groups P, M and S, which means it is suited to machining unalloyed and alloyed steel, rostfreiem Stahl and heat‑resistant superalloys or titanium. This balance of coating and substrate translates into fewer tool changes and higher machine uptime, supporting predictable cycle times and improved process reliability in series production. Geometry and edge design for demanding cuts The rectangular form with a 0.8 mm corner radius and 0° (negative) rake gives pronounced edge stability and resistance to edge chipping when cutting intermittently or in heavy engagement conditions. The built‑in F57T chipbreaker is calibrated to promote secure chip formation across a range of axial depths of cut, helping to avoid built‑up edge and reducing rework. Combined with tolerance class M and the specified thickness, the geometry supports consistent clamping and repeatable positioning in standard toolholders, which enhances dimensional reliability and surface quality in finished components. Practical application and machining advice Designed as a multi‑purpose grade, the insert is particularly suitable for medium to heavy milling applications where a robust cutting edge is required. For finishing passes the corner radius supports better surface integrity, while for roughing the negative rake assists in absorbing shock loads. The insert’s coated carbide composition and the Tiger‑tec Gold technology aim to lower overall tooling costs by extending service intervals; this results in measurable gains in productivity and fewer interruptions on the shop floor. For specific cutting data and optimisation, technical consultation is available to match cutting speeds and feeds to machine capabilities and workpiece material. Request tailored cutting data or place an order for the LNMU100508-F57T WSP45G via Metav Werkzeuge; technical advice and rapid delivery information are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: LNMU100508-F57T-WSP45G-WALTER Article designation: LNMU100508-F57T WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core dimensions / values Size: 10 Corner radius: 0.8 Thickness: 05 Rake angle: 0° (negative) Tolerance class: M Design / special features Rectangle form Chipbreaker: F57T Coating: Tiger‑tec Gold (PVD) Grade: WSP45G (coated carbide) Execution: U Applicable material groups: P / M / S FAQ What materials is this insert suitable for? The LNMU100508-F57T WSP45G insert is specified for ISO groups P, M and S, i.e. steel, rostfreiem Stahl and heat‑resistant alloys including titanium and superalloys. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold coating on the insert enhances wear resistance and thermal stability, supporting longer tool life and consistent surface quality in continuous production. Is the geometry suitable for interrupted cuts? Yes, the negative 0° rake and the rectangular shape of the insert are designed to improve edge stability under interrupted and heavy‑engagement cutting conditions. Can this insert be used for finishing passes? With a 0.8 mm corner radius, the insert delivers good surface integrity for finishing; the F57T chipbreaker also assists in achieving consistent chip formation. Where to obtain cutting data or purchase the insert? Cutting recommendations and purchase options for the LNMU100508-F57T WSP45G are available through Metav Werkzeuge; contact info@metav-werkzeuge.com or call +49 2822 7131930 for advice and ordering. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU120608-B57T WKP35G W KP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WKP35G grade for highly productive milling of steel and cast iron; the rectangular geometry with a 0° negative rake and B57T chipbreaker ensures stable chip control and long tool life. Order the LNMU120608‑B57T WKP35G from Metav Werkzeuge or consult our specialists for process-specific advice. LNMU120608-B57T WKP35G – Milling insert for steel and cast iron (Walter Tools) A LNMU120608‑B57T WKP35G milling insert engineered for robust, high‑productivity machining of steel and cast iron in diverse milling applications. Tiger‑tec Gold coating for high wear resistance WKP35G grade – robust coated carbide Rectangular insert with 0.8 mm corner radius B57T chipbreaker for controlled chip formation Proven coating and grade for extended cutting life The Tiger‑tec Gold coating combined with the WKP35G grade offers a balanced solution between wear resistance and toughness. This coated carbide composition is designed to reduce abrasive wear in intermittent and continuous milling of steel and cast iron, leading to fewer insert changes and improved process uptime. The result is stable cutting-edge behaviour under fluctuating loads, which supports predictable production cycles and reduced tooling costs. Geometry and chip control that stabilise production Rectangular geometry with a 0° negative rake and a 0.8 mm corner radius provides mechanical strength at the cutting edge, making the insert suitable for both roughing and semi-finishing passes. The B57T chipbreaker is tailored to generate short, controlled chips in ferrous materials, lowering the risk of chip entanglement and improving surface integrity. These features combine to enhance dimensional stability and reduce the need for secondary operations. Broad material compatibility with clear application focus Designed according to ISO classifications for workpiece groups, this insert supports machining of steel (P) and cast iron (K) as stated by the grade characteristics. The coated carbide and the Tiger‑tec Gold technology enable consistent results across a wide range of steel grades and grey or nodular cast irons. Where catalogue geometry and cutting data permit, the insert provides a reliable balance of tool life and surface finish, making it suitable for batch production and single‑piece flow alike. Practical handling, fitting and process integration Tolerance class M, a plate size of 12 and a plate thickness of 06 combine to offer straightforward integration into compatible milling cutters and toolholders. The rectangular form factor simplifies indexation and reduces setup complexity, while the robust grade reduces the frequency of tool change‑overs. For operators seeking improved cycle times and dependable reproducibility, this insert forms a cost‑effective component in modular tooling systems; technical consultation can refine cutting data for specific workpiece alloys and machine capacities. Contact Metav Werkzeuge for application advice and to secure original Walter Tools Tiger‑tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: LNMU120608-B57T-WKP35G-WALTER Article: LNMU120608-B57T WKP35G Manufacturer: Walter Tools Product type: Milling insert Series: Tiger‑tec Gold Facts Size: 12 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WKP35G (coated carbide; Tiger‑tec Gold) Chipbreaker: B57T Shape: Rectangular Material suitability: Steel (P), Cast iron (K) Execution: U FAQ What materials is this insert suitable for? The LNMU120608‑B57T WKP35G is designed for machining steel (P) and cast iron (K) in accordance with the grade characteristics of WKP35G and the Tiger‑tec Gold coating. How does the B57T chipbreaker affect machining? The B57T chipbreaker produces short, controlled chips in ferrous materials, which improves chip evacuation and surface quality when using the LNMU120608‑B57T WKP35G insert. What does the 0° negative rake mean in practice? A 0° negative rake increases edge strength and resistance to mechanical shock, making this insert suitable for heavier cuts and roughing operations with stable toolholders. Can the insert be used for finishing passes? Yes, the combination of the 0.8 mm corner radius and the coated WKP35G grade allows for semi‑finishing and finishing in many steel and cast iron applications, depending on cutter setup and cutting parameters. How does tolerance class M influence selection? Tolerance class M indicates standard manufacturing precision for the insert; it supports reliable seating and repeatable indexation in compatible milling cutters such as those specified by Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU120608-B57T WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating together with the WKP35S grade and the B57T chipbreaker to secure consistent chip control and dependable tool life; order the insert through Metav Werkzeuge or contact the advisory team for machining recommendations. LNMU120608-B57T WKP35S milling insert — Tiger·tec Silver, for steel and cast iron (Walter Tools) LNMU120608-B57T WKP35S is a rectangular milling insert designed for robust roughing and semi-finishing in steel and cast iron applications, offering a combination of high wear resistance and reliable chip formation Tiger·tec Silver coating for long tool life Optimised B57T chipbreaker for chip control Suitable for steel and cast iron (ISO P/K) Rectangular insert with 0.8 mm corner radius Consistent performance from a modern coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade provides a balance of thermal resistance and abrasive wear protection that benefits machining of ISO P (steel) and ISO K (cast iron). The coated hardmetal composition is engineered to stabilise cutting conditions and delay flank wear, which translates into more predictable tool change intervals and steadier production output. This stability supports higher process reliability when machining common steels and grey or ductile cast irons, where chip behaviour and temperature control determine part quality and cycle times. Geometry and chip control that reduce machining interruptions A rectangular form with a 0.8 mm corner radius and the dedicated B57T chipbreaker deliver well-controlled chip formation and improved edge strength. The insert’s 0° negative rake increases the cutting edge robustness, making it suitable for tougher engagement conditions and interrupted cuts. These geometry choices reduce the risk of edge chipping and help maintain dimensional consistency, so the machining process is less susceptible to unexpected stops. The M tolerance class ensures repeatable positioning in compatible toolholders, supporting quick indexing and minimal set-up deviation. Practical integration for production-focused workshops As part of the Tiger·tec Silver series, this grade is intended to fit into established tool families where predictable wear behaviour and wide material coverage are priorities. The insert’s specification—rectangular format, B57T chipbreaker and WKP35S coating technology—makes it a practical choice for operations aiming to balance tool life with surface finish requirements. With clear material suitability for steel and cast iron, the insert simplifies grade selection for mixed-production environments and reduces the need for frequent trial-and-error when preparing cutting data for batch runs. For machining scenarios that demand stable chip control and reliable wear performance, contact Metav Werkzeuge to specify the Walter Tools LNMU120608-B57T WKP35S insert for the production process — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: LNMU120608-B57T-WKP35S-WALTER Label: Fräswendeschneidplatte LNMU120608-B57T WKP35S Walter Tools Product type: Fräswendeschneidplatte Grade: WKP35S Series: Tiger-tec Silver Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Plate size: 12 Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: B57T Plate form: Rectangular Material suitability: P (steel) and K (cast iron) Coating technology: Tiger·tec Silver Execution: U FAQ What materials is this insert designed for? The LNMU120608-B57T WKP35S insert is specified for ISO P (steel) and ISO K (cast iron), based on the WKP35S grade and Tiger·tec Silver coating. How does the B57T chipbreaker affect machining? The B57T chipbreaker promotes controlled chip formation and evacuation, supporting stable cutting and improved surface results when using the Walter Tools insert. Is the 0° negative relief angle suitable for interrupted cuts? Yes, the 0° negative relief increases edge strength and helps withstand impacts in interrupted or heavy engagement conditions with this insert. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal and abrasive wear resistance, which helps extend tool life and maintain consistent performance in the machining of steel and cast iron. Does the insert require a special toolholder? The insert fits holders compatible with the LNMU120608-B57T family and M tolerance class; ensure the holder is specified for rectangular inserts with the corresponding chipbreaker geometry. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
LNMU120608-B57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a dedicated WPP35G carbide grade for extended tool life and consistent chip control in steel machining; order the LNMU120608-B57T WPP35G insert directly via Metav Werkzeuge or consult the team for application-specific advice. LNMU120608-B57G WPP35G milling indexable insert – Tiger‑tec Gold coated carbide, for steel (Walter Tools) A LNMU120608-B57T WPP35G milling indexable insert tailored for reliable steel machining, combining a coated carbide grade with a B57T chipbreaker for controlled chip formation and stable material removal. Tiger‑tec Gold coated carbide for long tool life Optimised B57T chipbreaker for reliable chip control Rectangular insert with 0.8 mm corner radius Suitable for steel machining (ISO P classification) Increased productivity from advanced coating technology The combination of Tiger‑tec Gold technology and the WPP35G grade delivers a clear productivity advantage when machining steels. The coated carbide substrate resists abrasive wear and thermal loading, which extends service intervals and reduces tooling costs per component. For production environments where cycle time and reproducibility matter, the improved wear resistance translates into fewer tool changes and more predictable output, helping to stabilise process windows and lower overall cost of ownership. Robust engagement and consistent chip control for safer machining The dedicated B57T chipbreaker is engineered to form short, consistent chips when used on ISO P (steel) materials; this improves evacuation and lowers the risk of entanglement. The insert’s negative 0° clearance increases edge strength for interrupted cuts and heavier engagement, while the 0.8 mm corner radius balances edge robustness with acceptable surface finish. Explained simply: the chipbreaker shapes the swarf, the negative relief protects the cutting edge during tough cuts, and the corner radius improves tool life without compromising component geometry. Seamless integration into tooling systems and process planning As a rectangular indexable insert with the designation LNMU120608-B57T, the component fits standard compatible toolholders and is dimensioned for compact pocketing and milling cutters. The series information indicates suitability across a range of steel conditions, from harder grades to more ductile steels, offering flexibility in mixed-production environments. Tolerance class M supports consistent seating and repeatable positioning in the cutter, aiding tool reprofiling strategies and minimising set-up variability during batch changes. Reliability backed by established tooling expertise Manufactured by Walter Tools and assigned to the Tiger‑tec Gold family, this insert benefits from proven material science and coating know‑how that emphasises stable chip formation and productive machining. The engineering behind the grade focusses on reproducible results and extended edge life, which is particularly advantageous for consistent series production. For application support or cut‑data recommendations, Metav Werkzeuge can provide further technical guidance to align cutting parameters with the intended material and cutter geometry. Contact Metav Werkzeuge for individual application advice on Walter Tools Tiger‑tec Gold inserts at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to find the optimal setup for production requirements Technical Data Article number: LNMU120608-B57T-WPP35G-WALTER Designation: LNMU120608-B57T WPP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Core specifications Size [mm]: 12 Thickness: 06 Corner radius [mm]: 0.8 Relief angle: 0° (negative) Tolerance class: M Materials & features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: B57T Shape: Rectangular Suitable for: Steel (ISO P) Product type: Milling indexable insert FAQ What materials is this insert suitable for? The LNMU120608-B57T WPP35G insert is designed primarily for steel machining and is classified for ISO P materials, with the WPP35G grade tuned for typical chip formation and thermal loads encountered when cutting steels. How does the B57T chipbreaker affect machining performance? The B57T chipbreaker promotes controlled, segmented chips that evacuate more reliably, improving surface quality and reducing the chance of chip-related interruptions during milling operations. Is the insert suitable for heavy-duty or interrupted cuts? Yes, the negative 0° clearance and the 0.8 mm corner radius enhance edge strength, making the insert robust for heavier engagements and moderate interruption while maintaining acceptable tool life. Can this insert be used with standard toolholders? The LNMU120608-B57T designation indicates a standard indexable insert form factor intended for compatible rectangular pockets; verify cutter pocket compatibility and seat tolerances before assembly. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, extending edge life and enabling steadier performance across varying steel grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
LNMU120608-F57T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coated carbide, a robust F57T chipbreaker and a 0° (negative) clearance for stable, high-productivity milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. LNMU120608-F57T WKP25S milling insert (for steel & cast iron) – Walter Tools The LNMU120608-F57T WKP25S is a rectangular indexable milling insert engineered for productive machining of steel and cast iron in demanding milling operations Tiger·tec Silver coated carbide for long life Rectangular insert with 0.8 mm corner radius Geometry F57T for controlled chip formation Suitable for steel and cast iron machining Prolonged tool life through modern coating technology The Walter Tools insert benefits from the Tiger·tec Silver coating on coated carbide, which is designed to resist abrasive wear and heat generation typical in steel and cast iron machining. This combination reduces flank and crater wear, resulting in more consistent tool life and fewer index changes during batch production. The documented coating technology supports productivity by maintaining a stable cutting edge under cyclic thermal loads and ensures predictable reconditioning intervals for scheduled tool management. Consistent chip control for secure processes and surface quality Equipped with the F57T chipbreaker, the insert promotes controlled chip formation, reducing the risk of long, entangling swarf and improving evacuation in conventional milling cycles. Controlled chips contribute directly to machine uptime and the resulting workpiece finish, especially when machining interrupted cuts or mixed features. In practice, effective chip control minimises secondary operations and supports repeatable process parameters across different batches, which is particularly valuable in production environments prioritising throughput and quality. Robust geometry and mounting for stable cutting forces The insert’s rectangular format and 0° (negative) clearance deliver enhanced edge strength and rigidity compared with positive-clearance geometries. A 0.8 mm corner radius balances edge durability with the capability to achieve good surface integrity; radii of this size absorb shock loads without compromising run-out behaviour. The overall geometry is therefore suited to milling tasks where stability and resistance to chipping are essential, such as shoulder milling and general roughing operations on medium- to high-strength steels and cast materials. Application range and handling notes for process planning Designed for the ISO material groups P (steel) and K (cast iron), the insert is applicable where abrasive wear and fragmented chips are expected. Selection of feeds, speeds and depth of cut should follow machine and workholding capabilities, bearing in mind that the Tiger·tec Silver grade and F57T chipbreaker favour operations that challenge thermal resistance and swarf control. For process certainty, trial cuts with incremental parameter adjustments are recommended to establish the optimum balance between metal removal rate and insert life; the insert designation provides a clear reference for tooling lists and CAM libraries. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools Tiger·tec Silver inserts for reliable, high-output milling Technical data Article number: LNMU120608-F57T-WKP25S-WALTER Product: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Grade: WKP25S Series: Tiger·tec Silver Facts Size: 12 Thickness: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Shape: Rectangular Chipbreaker: F57T Tolerance class: M Special features Material: P / K Suitable for: Steel (P) Suitable for: Cast iron (K) Coating/grade type: coated carbide Designation: LNMU120608-F57T WKP25S FAQ What materials can be machined with this insert? The LNMU120608-F57T WKP25S insert is intended for ISO groups P (steel) and K (cast iron), covering unalloyed and alloyed steels as well as common cast materials. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP25S grade enhances wear resistance and thermal stability, extending insert life and supporting consistent performance in high-demand milling. What is the purpose of the F57T chipbreaker? The F57T geometry improves chip control, producing short, manageable chips that aid evacuation and protect the workpiece surface from re-cutting and built-up edge. How does the 0° (negative) clearance affect machining? A 0° (negative) clearance increases edge strength and rigidity, reducing the tendency for chipping under heavy or interrupted cuts and contributing to process security in robust milling tasks. When is a 0.8 mm corner radius recommended? A 0.8 mm corner radius provides a compromise between edge strength and surface finish; it is recommended where load absorption is required without significantly impacting dimensional accuracy. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU120608-F57T WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WKP35G grade for productive machining of steel and cast iron; the negative 0° relief and a 0.8 mm corner radius provide robust edge stability and consistent part quality. Order the LNMU120608-F57T WKP35G directly via (Metav Werkzeuge) or ask our consultants if needed. LNMU120608-F57T WKP35G – Milling indexable insert, Tiger‑tec Gold, Walter Tools The LNMU120608-F57T WKP35G is a rectangular milling insert engineered for high-productivity machining of steel and cast iron in industrial cutting applications Tiger‑tec Gold coating for long tool life Grade WKP35G optimised for steel and cast iron 0° negative rake for stable cutting geometry 0.8 mm corner radius for durable cutting edge Coating and grade that extend tool life and process stability The Tiger‑tec Gold coating combined with the WKP35G grade denotes a coated carbide composition optimised for the thermal and abrasive demands of machining steels and cast iron. This combination improves wear resistance and stable chip formation, which reduces the frequency of tool changes and supports predictable cycle times. For production environments where consistent tool performance is essential, the result is fewer interruptions and more reliable part throughput. The chipbreaker designation F57T contributes to predictable swarf behaviour in semi‑continuous and interrupted cuts. Geometry designed for edge strength and repeatable surface quality The insert’s rectangular form and negative 0° relief create a cutting geometry that prioritises edge stability and resistance to mechanical shock. The 0.8 mm corner radius increases the cutting edge’s resilience, particularly during heavy feed or in interrupted milling, and helps maintain a consistent surface finish over longer tool life. The combination of grade, chipbreaker and geometry ensures that the cutting edge stays robust under variable cutting forces, supporting steady dimensional accuracy in series production. Material compatibility and practical application benefits Specified for ISO groups P (steel) and K (cast iron), the plate is suitable where a balance of abrasion resistance and edge strength is required. In practice, the insert supports typical steel grades and a range of grey and nodular cast irons, delivering improved process reliability and predictable tool wear. The controlled chip formation characteristic of this solution also reduces machine tool downtime for chip management and simplifies process planning in mixed‑material production batches. For complex jobs, the insert assists in maintaining consistent part quality while keeping cycle times competitive. Contact Metav Werkzeuge for tailored application advice and prompt supply of Walter Tools LNMU120608-F57T WKP35G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: LNMU120608-F57T-WKP35G-WALTER Label: Fräswendeschneidplatte LNMU120608-F57T WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F57T Facts Plate size: 12 Plate thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold Material type: coated carbide Shape: rectangular Suitable for: steel (P), cast iron (K) Sort/grade description: WKP35G for coated carbide FAQ What materials is this insert suitable for? The LNMU120608-F57T WKP35G is designed primarily for ISO groups P and K, meaning it is suited to machining steel and cast iron. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and supports more consistent chip formation, which contributes to longer tool life and steadier production runs. What role does the 0.8 mm corner radius play? A 0.8 mm corner radius provides increased edge strength and improved resistance to chipping, particularly useful for interrupted cuts and applications requiring stable surface quality. Is the negative 0° relief suitable for heavy-duty milling? Yes, the negative 0° relief supports a stable cutting geometry that withstands elevated cutting forces, making it appropriate for robust milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names remain the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
LNMU120608-F57T WKP35S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WKP35S grade provides extended tool life and consistent edge stability during the machining of Stahl and Gusseisen; the rectangular form with a 0.8 mm corner radius and F57T chipbreaker promotes reliable chip control and improved surface finish. Order the LNMU120608‑F57T WKP35S directly via Metav Werkzeuge or consult the Metav team for process-specific recommendations. LNMU120608-F57T WKP35S milling insert, Tiger‑tec Silver, for Stahl and Gusseisen — Walter Tools The LNMU120608‑F57T WKP35S is a rectangular milling insert engineered for robust, economical machining of Stahl and Gusseisen in general milling applications. Tiger·tec Silver coating extends tool life Suitable for Stahl and Gusseisen materials 0° negative rake for cutting stability Rectangular form, 0.8 mm corner radius High-performance coating and predictable productivity The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers a balanced mix of wear resistance and thermal management that supports longer tool life and consistent part quality. As a coated carbide solution, the insert is designed to maintain a stable cutting edge under typical steel and cast‑iron cutting conditions, which reduces the need for frequent index changes and contributes to cost‑effective production cycles. The result is fewer interruptions, steadier cycle times and enhanced machine utilisation. Reliable chip control and material adaptability Designed with the F57T chipbreaker and a rectangular geometry, this insert provides controlled chip formation across the ISO P and ISO K material groups (Stahl and Gusseisen). The 0.8 mm corner radius contributes to an improved surface finish on transitional passes, while the 0° (negative) clearance angle increases cutting stability in interrupted cuts and heavy engagement scenarios. These features simplify the machining of abrasive cast components and typical structural steels by reducing vibration and promoting predictable swarf behaviour. Integration into production and process benefits With a compact designation reflecting its geometry and thickness, the insert is suitable for defined toolholders and standard clamping systems. The tolerance class M supports reproducible seating in the pocket, which helps maintain repeatable tool offsets and consistent part tolerances. For process planning, the insert’s combination of coating, grade and chipbreaker targets a balance between surface integrity and economical wear progression, enabling longer index life and fewer tool changes per shift. Application focus and brand assurance Engineered by Walter Tools, the grade is positioned for manufacturers seeking dependable performance in mixed‑batch turning and milling scenarios where Stahl and Gusseisen predominate. The WKP35S sort is a coated carbide formulation developed to address the typical heat and chip characteristics of these workpiece families, offering a pragmatic route to improved throughput and constant results in everyday production. For tailored recommendations on cutting data, toolholder pairing and availability of the Walter Tools LNMU120608‑F57T WKP35S, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and ordering support Technical data Article number: LNMU120608-F57T-WKP35S-WALTER Designation: LNMU120608-F57T WKP35S Product type: Milling insert Brand: Walter Tools Series: Tiger‑tec Silver Core specifications Plate size: 12 mm Corner radius: 0.8 mm Thickness designation: 06 Clearance angle: 0° (negative) Tolerance class: M Features and applications Chipbreaker: F57T Coating: Tiger‑tec Silver Grade: WKP35S Suitable for: Stahl (ISO P) Suitable for: Gusseisen (ISO K) Plate form: Rectangular FAQ What materials is this insert designed for? The LNMU120608‑F57T WKP35S insert from Walter Tools is specified for Stahl (ISO P) and Gusseisen (ISO K) applications. How does the F57T chipbreaker improve machining? The F57T chipbreaker promotes consistent chip segmentation and evacuation, which helps the WKP35S grade maintain stable cutting conditions and improves surface finish. What does the 0° (negative) clearance angle mean for operations? A 0° (negative) clearance increases edge strength for the milling insert, improving stability in interrupted cuts and heavy engagement situations typical for cast‑iron and many steel operations. Is the insert suitable for high‑precision pocketing and finishing? With a 0.8 mm corner radius and tolerance class M, the insert offers reproducible seating and a reliable edge form that supports consistent surface quality in many finishing and semi‑finishing tasks. Which series and coating does the grade belong to? The insert is part of the Tiger‑tec Silver series and uses the associated coating technology to balance wear resistance and thermal stability. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU120608-F57T WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP35G grade for reliable wear resistance and consistent chip control in Stahl machining; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. LNMU120608-F57T WPP35G milling indexable insert – Tiger‑tec Gold coated, for Stahl | Walter Tools The LNMU120608-F57T WPP35G is a rectangular milling insert designed with Tiger‑tec Gold coating for robust performance in general Stahl machining applications. Tiger‑tec Gold coated for high wear resistance Optimised for Stahl machining (ISO P) Rectangular form with 0.8 mm corner radius Negative 0° rake for stable cutting Increased productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP35G coated carbide grade delivers notable wear resistance and steady performance in serial production. This insert is engineered for the thermal and mechanical demands of Stahl (ISO P), where consistent edge stability reduces unplanned tool changes. The result is a more predictable lifecycle and fewer interventions at the machine, supporting continuous production runs and clear cost-to-performance advantages. Geometry that secures repeatable surface quality The rectangular plate form together with a 0.8 mm corner radius and a negative 0° rake provides mechanical rigidity and controlled engagement with the workpiece. Tolerance class M ensures repeatable seating in compatible tool holders, while the thickness designation 06 and size 12 support stable cutting conditions. These geometry attributes contribute directly to improved dimensional consistency and finish in milled components. Efficient chip control and targeted material range Equipped with the F57T chipbreaker, the insert promotes controlled chip formation for common Stahl grades, helping to avoid problematic long chips and to maintain coolant access at the cutting edge. The WPP35G grade is configured specifically for Stahl, covering unalloyed and alloyed steels with a balanced hardness-to-toughness profile—classified as suitable for the typical heat and chip formation encountered when machining these materials. Reliable handling and process integration The insert's indexable design simplifies replacement and reduces setup downtime, while the defined execution and shape allow integration into standard milling tool bodies that accept LNMU-style plates. Clear designation and modest handling requirements make inventory management straightforward and support quick tool swaps on the shop floor. For tailored toolholder recommendations and process parameters, Metav Werkzeuge provides application support and practical advice. For Walter Tools applications using the Tiger‑tec Gold WPP35G grade, contact Metav Werkzeuge for ordering and machining advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: LNMU120608-F57T-WPP35G-WALTER Description: Fräswendeschneidplatte LNMU120608-F57T WPP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Chipbreaker: F57T Facts Tolerance class: M Corner radius: 0.8 mm Free angle: 0° (negative) Plate thickness designation: 06 Size designation: 12 Special features Coated carbide grade Tiger‑tec Gold Suitable for Stahl (ISO P) Rectangular plate form Execution: U Wendeplatte ISO designation: LNMU120608-F57T WPP35G FAQ What materials is this insert designed for? The LNMU120608-F57T WPP35G insert is optimised for machining Stahl and is classified for ISO P applications, covering unalloyed and alloyed steels. How does the F57T chipbreaker affect performance? The F57T chipbreaker on the LNMU120608-F57T WPP35G promotes controlled chip formation and evacuation, improving machining stability and surface finish when working with Stahl. Is the insert compatible with standard LNMU tool holders? The insert follows the LNMU designation and tolerance class M, which supports fitting in compatible tool bodies designed for LNMU-style rectangular plates; correct holder verification is advised. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WPP35G grade enhances wear resistance and edge robustness, extending tool life and maintaining consistent cutting performance in Stahl machining. How should tool life be optimised for this insert? Optimise cutting parameters to the specific Stahl grade, monitor wear patterns, and use the insert’s chip control features; Metav Werkzeuge can provide application-specific recommendations for the LNMU120608-F57T WPP35G. Manufacturer: Walter Tools (Walter AG); Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned only for explanation. No connection exists between our company and the mentioned brands. The offered item is an original factory-new product of Walter Tools.
LNMU120608-F57T WSM35G U Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, a stable chipbreaker design and a negative relief angle for reliable machining of tough alloys; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. LNMU120608-F57T WSM35G rectangular milling insert, Tiger·tec Gold — Walter Tools LNMU120608-F57T WSM35G is a rectangular milling insert optimised for high-demand machining of stainless steels and heat‑resistant superalloys in industrial production. Tiger·tec Gold coating for increased tool life Grade WSM35G for stainless and superalloys Rectangular form with 0.8 mm corner radius Chipbreaker F57T for stable chip control Reliable performance for demanding materials The combination of the WSM35G grade and the Tiger·tec Gold coating provides a measurable improvement in process stability when machining stainless steels and high‑temperature alloys. The coated cemented carbide composition is engineered to resist thermal and mechanical loads common in such materials, which reduces edge wear and helps maintain dimensional consistency. For manufacturers aiming to reduce downtime and scrap rates, this results in a more predictable production flow and fewer unplanned tool changes, translating into improved throughput and lower overall machining costs. Predictable chip control and enhanced surface quality Engineered chip formation via the F57T chipbreaker simplifies evacuation of swarf and reduces the risk of built‑up edge, especially when cutting tough materials. Stable chip control helps to preserve the cutting edge and contributes to consistent surface finish over long runs. The insert’s geometry—with a corner radius of 0.8 mm and a negative 0° relief angle—supports robust cutting conditions, allowing conservative programming for roughing passes and steady results during finishing operations where surface integrity matters. Design that supports flexible production strategies The rectangular shape and the specified insert dimensions make this component adaptable to a range of clamping solutions and cutter bodies used in milling centres. The construction supports moderate to aggressive feeds with reliable repeatability, enabling process planners to consolidate operations or extend tool life by choosing suitable parameters. As a result, mass production lines and job shops alike benefit from fewer tool variants and simplified inventory management while maintaining machining performance. Practical guidance for integration and use When integrating this insert into existing setups, preference should be given to tooling systems that secure rectangular inserts robustly to exploit the grade’s stability. Optimise cutting speeds and cooling strategy for the workpiece material: the grade is especially effective for materials classified under ISO groups M and S, namely stainless steels and heat‑resistant superalloys/titanium. Monitoring tool wear under initial production runs ensures the selected parameters fully harness the insert’s resistance to thermal degradation and its chip control capabilities. Contact Metav Werkzeuge for tailored cutting data, availability and application support for Walter Tools inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: LNMU120608-F57T-WSM35G-WALTER Label: Fräswendeschneidplatte LNMU120608-F57T WSM35G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Grade: WSM35G Core figures Corner radius: 0.8 mm Insert size: 12 Thickness code: 06 Relief angle: 0° (negative) Special features Series: Tiger·tec Gold Chipbreaker: F57T Insert form: Rectangular Suitable for: stainless steels (ISO M), heat‑resistant superalloys and titanium (ISO S) Tolerance class: M Execution: U FAQ What materials is this insert suited for? This insert is designed primarily for stainless steels and heat‑resistant superalloys; the WSM35G grade and Tiger·tec Gold coating support machining of ISO groups M and S. How does the chipbreaker F57T benefit the machining process? The F57T chipbreaker promotes controlled chip formation and evacuation, which reduces the likelihood of built‑up edge and supports consistent surface quality during extended runs. What does the negative 0° relief angle mean in practice? A negative 0° relief angle increases edge strength and stability under heavy cutting loads, making it suitable for roughing and when machining tougher materials. Is this insert compatible with standard rectangular milling cutter bodies? The rectangular form and the specified dimensions match common clamping systems for rectangular inserts; please verify seat size and clamping type against the toolholder. Which series does the insert belong to and what are the benefits? Belonging to the Tiger·tec Gold series, this insert benefits from advanced coating technology that improves wear resistance and thermal stability for demanding applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer.
LNMU120608-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold grade and the WSP45G PVD coating combined with a robust 0.8 mm corner radius for reliable chip control and long tool life; order the insert directly via Metav Werkzeuge or consult the in‑house advisors for application details. LNMU120608-F57T WSP45G – Indexable milling insert, Tiger‑tec Gold (Walter Tools) The LNMU120608-F57T WSP45G is a rectangular indexable milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in both roughing and semi‑finishing operations. Tiger‑tec Gold PVD‑coated grade Suitable for steel, stainless steel, superalloys 0.8 mm corner radius for stable cutting Negative 0° rake in rectangular form High‑performance grade for demanding milling The WSP45G grade from the Tiger‑tec Gold series is a PVD‑coated carbide designed to balance wear resistance and edge toughness. This composition supports stable chip formation when machining conventional steels and helps control built‑up edge when tackling stainless steel grades. The coating technology increases resistance to abrasive wear and thermal loading, which translates into longer tool life and fewer insert changes during production runs. For process planning, the designation of the grade indicates suitability across the ISO groups P, M and S, providing a straightforward basis for tool selection. Robust geometry for process security and productivity The insert’s rectangular form and negative 0° rake create a rigid cutting geometry that reduces deflection and enables higher feed rates in interrupted cuts. The 0.8 mm corner radius strengthens the cutting edge and improves surface stability during semi‑finishing, while the F57T chipbreaker is optimised for chip control in a wide range of cutting conditions. Together these features support a measurable increase in productivity and repeatable results on challenging workpieces, reducing downtime for insert changes and rework. Application scope and selection advice This insert is intended for milling applications where a combination of toughness and wear resistance is required. Typical uses include roughing and semi‑finishing of unalloyed and alloyed steel, machining of stainless steel, and limited operations on heat‑resistant superalloys. The designation LNMU120608 points to the insert series and basic format while the size and thickness values help determine clamping and seat compatibility. For optimal performance, pair the insert with a stable cutter body sized for the 12 series insert and follow the toolholder manufacturer’s recommendations for feed and speed adjusted to material group and cut depth. Contact Metav Werkzeuge today for application guidance or stock information on the Tiger‑tec Gold WSP45G insert and request tailored recommendations for specific machining tasks. Technical data Article number: LNMU120608-F57T-WSP45G-WALTER Designation: LNMU120608-F57T WSP45G Product type: Indexable milling insert Facts Size: 12 Thickness: 06 Corner radius: 0.8 mm Clearance / rake: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G (PVD‑coated) Chipbreaker: F57T Form: Rectangular Applicable for: steel, stainless steel, heat‑resistant superalloys FAQ What materials are suitable for this insert? The LNMU120608‑F57T WSP45G insert is suitable for machining steel, stainless steel and selected heat‑resistant superalloys in accordance with its P, M and S designation. What advantages does the Tiger‑tec Gold grade provide? Tiger‑tec Gold offers a PVD‑coated carbide composition that combines wear resistance with edge toughness, improving the lifespan of the LNMU120608‑F57T WSP45G under elevated temperatures and abrasive conditions. Which operations suit this insert best? This insert is optimised for roughing and semi‑finishing milling operations where stable chip formation and edge robustness are required. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius increases edge strength and helps achieve consistent surface integrity during semi‑finishing, reducing the risk of premature edge chipping for the WSP45G grade. Is the insert compatible with common toolholders for 12‑series inserts? The LNMU120608‑F57T WSP45G follows standard 12‑series insert geometry; compatibility depends on the cutter body seat and clamping system, so verify seat type and securement before assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names mentioned are the property of their respective owners. The referenced brand Walter Tools is named for explanation; there is no affiliation with the seller. The offered item is an original, factory‑new product from the manufacturer.
LNMU130608R-L55T WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, a chipformer optimised for cast iron and a robust rectangular geometry to maintain productive machining cycles and predictable tool life; order the insert directly via Metav Werkzeuge or consult our application specialists for process optimisation. LNMU130608R-L55T WKK25G — indexable milling insert for cast iron | Walter Tools The LNMU130608R-L55T WKK25G is a rectangular indexable milling insert designed for efficient machining of cast iron components, offering a coated carbide grade and a chipbreaker tuned for broken, abrasive chips. Tiger·tec Gold coated grade WKK25G Optimised for cast iron (K) L55T chipbreaker for secure chip control Rectangular insert with 0.8 mm radius Maximise productivity on cast iron with a purpose-built insert This indexable milling insert delivers a clear productivity advantage when machining cast iron. The WKK25G grade, part of the Tiger·tec Gold series, is engineered to resist abrasive wear common in grey and ductile castings; this reduces the frequency of insert changes and supports longer uninterrupted production runs. The rectangular geometry and the 0° negative relief contribute to stable cutting forces and predictable chip formation. For operations requiring repeatable cycle times and consistent surface quality, this configuration supports higher uptime and fewer interruptions. Coating and chip control that reduce downtime and rework The combination of a coated carbide substrate and an optimised L55T chipbreaker helps to manage the short, often brittle chips typical of cast iron. The coating enhances edge stability and wear resistance under abrasive conditions, while the chipbreaker promotes controlled fragmenting of swarf to avoid entanglement and reduce the risk of recutting. As a result, the machining process becomes more robust against variable cast structures, translating into fewer incidents of tool damage and less rework — an important factor for cost-effective production. Practical specifications and application guidance for shop-floor success Key dimensions and the 0.8 mm corner radius make this insert suitable for general face and shoulder milling where a balance between edge strength and profile detail is required. The insert’s rectangular form factor provides secure clamping and repeatable orientation in compatible tool holders. Use in rigid tool bodies and stable setups is recommended to exploit the grade’s wear resistance; moderate feeds help maintain edge life while ensuring effective chip breaking. For tailored advice on feeds, speeds and suitable cutter bodies, consult the technical advisers at Metav Werkzeuge to align the insert’s strengths with specific component geometries. For application-specific recommendations or to secure supply of the Walter Tools LNMU130608R-L55T WKK25G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery guidance Technical Data SKU: LNMU130608R-L55T-WKK25G-WALTER Product type: Indexable milling insert (rectangular) Designation: LNMU130608R-L55T WKK25G Manufacturer: Walter Tools Facts Plate size: 13 Corner radius: 0.8 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKK25G (coated carbide) Chipbreaker: L55T Shape: rectangular Application: cast iron machining (K) Execution: U FAQ What materials is this insert intended to machine? The LNMU130608R-L55T WKK25G insert is specified for cast iron machining (material group K) and is tuned to resist abrasive wear typical of cast components. What advantages does the Tiger·tec Gold technology provide? Tiger·tec Gold coating enhances edge stability and wear resistance, enabling the WKK25G grade to maintain cutting performance and reduce insert change frequency under abrasive cast iron conditions. How does the L55T chipbreaker affect operation? The L55T chipbreaker promotes secure chip control by fragmenting short, brittle chips from cast iron, reducing swarf issues and lowering the risk of recutting or tool damage during milling. Is this insert compatible with general milling tool holders? The rectangular form and standard ISO designation of the insert allow use in matching cutter bodies designed for rectangular indexable inserts; ensure the toolholder supports the insert’s thickness and clamping geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for clarification. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
LNMU130608R-L55T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for extended tool life and consistent chip control when machining steel and cast iron; order the LNMU130608R-L55T WKP25S insert directly via Metav Werkzeuge or request tailored advice from our consultants for optimal process integration. LNMU130608R-L55T WKP25S – Milling indexable insert (Tiger·tec Silver, 0° negative) by Walter Tools The LNMU130608R-L55T WKP25S is a rectangular milling insert designed for stable, high-productivity machining of steel and cast iron, combining a wear-resistant coated grade with a geometry optimised for controlled chip formation. Tiger·tec Silver coating for extended tool life WKP25S grade optimised for steel and cast iron Rectangular form with 0.8 mm corner radius 0° negative rake for stable cutting performance Consistent cutting performance and prolonged service life The insert’s Tiger·tec Silver technology and the WKP25S coated carbide grade deliver high resistance to abrasive and thermal wear, which translates into fewer tool changes and longer productive tool life. Designed specifically for machining materials in groups P (steel) and K (cast iron) according to ISO 513, the coated grade manages the typical heat and chip characteristics of these substrates. The result is a predictable tool wear pattern, improved process reliability and the potential for higher metal removal rates without sacrificing component quality. Geometry and chip control for stable milling The rectangular form and the integrated chipbreaker L55T provide consistent chip segmentation and evacuation, reducing the risk of built-up edge and workpiece damage during intermittent or continuous cuts. The 0° negative rake increases edge robustness and damping under heavy cuts, while the 0.8 mm corner radius supports edge strength for roughing and semi-finishing operations. Together, these geometric attributes help maintain a stable cutting process with lower vibration and a more repeatable surface finish on serial production runs. Application flexibility that improves productivity Engineered for a broad range of steels and cast irons, this insert reduces the need for frequent tool changes across mixed-production environments. Compatibility with common milling bodies and standard clamping systems means quick insertion and repeatable positioning on the toolholder. The coating and grade combination favour processes where a balance of wear resistance and toughness is required, enabling higher cycle output and fewer interruptions for regrinding or replacement. Practical benefits for workshop workflows The insert’s design supports efficient stock removal and reliable tool life, contributing to reduced setup time and predictable production planning. Its tolerance class M ensures dimensional consistency for repeat operations, while the compact dimensions lend themselves to flexible toolpath strategies in both roughing and finishing passes. Clear identification by ISO-style designation simplifies inventory management and ordering within established procurement processes. Contact Metav Werkzeuge today to specify the LNMU130608R-L55T WKP25S for the intended machining tasks and obtain application-focused recommendations from our technical advisors Technical data Article number: LNMU130608R-L55T-WKP25S-WALTER Name: LNMU130608R-L55T WKP25S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Plate size: 13 Thickness code: 06 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP25S (coated carbide) Chipbreaker: L55T Form: Rectangular Material applicability: Steel (P), Cast iron (K) FAQ Which materials is this insert suitable for? The LNMU130608R-L55T WKP25S milling insert from Walter Tools is specified for machining steel (P) and cast iron (K) in line with ISO 513; the WKP25S grade and Tiger·tec Silver coating are optimised for those groups. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver, as applied to the WKP25S grade, offers improved wear resistance and thermal stability, which helps the insert maintain cutting performance over longer tool life spans in demanding milling applications. How does the 0° negative rake affect cutting? The 0° negative rake increases edge robustness and stability during heavy cuts; in the case of this rectangular insert, it complements the 0.8 mm corner radius to reduce edge chipping and support consistent material removal. Can this insert be used for both roughing and semi-finishing? Yes, the geometry and chip control features of the LNMU130608R-L55T WKP25S make it suitable for a combination of roughing and semi-finishing operations, providing a balance between durability and surface quality. What identification should be used when reordering? Order using the ISO-style designation LNMU130608R-L55T WKP25S and specify Walter Tools as the manufacturer to ensure the correct coated carbide grade and chipbreaker variant are supplied. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for identification and explanatory purposes only; the described article is an original, factory-new product of the stated manufacturer.
LNMU130608R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of high productivity and consistent tool life: the Tiger·tec Gold grade and the WKP35G coating deliver reliable performance when machining steel and cast iron, while the negative 0° geometry and L55T chipbreaker ensure secure cutting and controlled chips. Order directly via Metav Werkzeuge or request application advice from the consultants. LNMU130608R-L55T WKP35G indexable milling insert — Tiger·tec Gold, negative 0° (Walter Tools) A LNMU130608R-L55T WKP35G is an indexable milling insert designed for efficient, repeatable machining of steel and cast iron in demanding production environments Tiger·tec Gold coated for extended tool life Optimised for steel and cast iron machining Negative 0° geometry for secure cutting 0.8 mm corner radius for robust strength Longer productivity through advanced coating technology The combination of the Tiger·tec Gold coating and the WKP35G grade provides a step change in productivity for series machining. The coating reduces abrasive wear and improves thermal stability, which extends tool life and reduces downtime for insert changes. For operations focused on consistent output and repeatable part quality, the coated carbide composition offers a measurable reduction in flank wear and improved edge stability compared with uncoated grades. This contributes to lower tooling costs per component and supports more predictable process windows. Stable cutting performance from optimised geometry Built with a negative 0° free angle and a 0.8 mm corner radius, the insert emphasises stability under heavy or interrupted cuts. The L55T chipbreaker is tuned for reliable chip control when machining both steel and cast iron, helping to avoid built-up edge and facilitating safe swarf evacuation. The rectangular plate form provides a secure clamping interface and predictable engagement, while the tolerance class M ensures interchangeability and repeatable positioning in suitable toolholders. These geometric choices translate directly into fewer reworks and better surface finish stability in production runs. Practical application and selection guidance for shops This indexable milling insert is intended for medium to heavy roughing and dependable finishing passes on ferrous materials. The plate is especially suitable where machining conditions call for robust edge strength and stable chip formation—typical in mixed production of unalloyed and alloyed steels as well as grey and nodular cast irons. When integrating the insert into tooling systems, select a compatible holder that supports the rectangular plate and the negative geometry; correct clamping and coolant strategy will fully leverage the coating and chipbreaker benefits. For tailored cutting data and feed recommendations, technical consultation is available to align cutting parameters with the chosen machine and workpiece material. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange procurement through Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: LNMU130608R-L55T-WKP35G-WALTER Product name: LNMU130608R-L55T WKP35G Product type: indexable milling insert Brand: Walter Tools Core technical data Corner radius: 0.8 mm Free angle: 0° (negative) Plate size: 13 mm Thickness: 06 Chipbreaker: L55T Tolerance class: M Materials & special features Grade / coating: Tiger·tec Gold; WKP35G (coated carbide) Plate form: rectangle Material suitability: steel (P), cast iron (K) Series: Tiger·tec Gold Execution: U FAQ What materials is this insert suitable for? The LNMU130608R-L55T WKP35G is designed for machining steel (P) and cast iron (K), exploiting the Tiger·tec Gold grade for improved wear resistance. How does the negative 0° geometry affect cutting? Negative 0° geometry provides increased edge security and stability under heavy or interrupted cuts, which is advantageous for robust milling operations using this Walter Tools insert. Which chipbreaker should be used for effective chip control? The built-in L55T chipbreaker on this insert supports reliable chip formation and evacuation when machining both steel and cast iron with appropriate cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
LNMU130608R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating together with the WPP35G grade yields improved wear resistance and reliable chip control for steel machining; order the insert directly via Metav Werkzeuge or request tailored cutting data from our consultants. LNMU130608R-L55T WPP35G milling insert for steel, Tiger‑tec Gold – Walter Tools The LNMU130608R-L55T WPP35G is a rectangular indexable milling insert engineered for robust steel machining, offering a Tiger‑tec Gold coated grade and an L55T chipbreaker for controlled chip formation Tiger‑tec Gold coating for long life WPP35G grade optimised for steel Rectangular shape with 0.8 mm radius Negative rake 0° for robust cutting Enhanced tool life and consistent performance for steel machining The LNMU130608R-L55T WPP35G combines Tiger‑tec Gold coating and a wear‑resistant WPP35G grade to deliver extended service life under typical steel cutting conditions. The coating provides thermal and abrasive protection, which reduces flank and crater wear during prolonged operation. For ISO P applications (steel), this results in more consistent cutting‑edge behaviour and predictable tool change intervals, supporting higher machine uptime and reduced tooling costs. Robust geometry for secure cutting and effective chip control The rectangular form and the 0.8 mm corner radius give the insert mechanical strength at the cutting edge, while the negative rake (0°) geometry increases edge robustness for heavier engagement and interrupted cuts. The integrated L55T chipbreaker is designed to produce manageable chips in steel, improving evacuation and lowering the likelihood of built‑up edge. Together, these features enable stable material removal rates and improved surface quality with fewer machining interruptions. Practical benefits in workshop and production environments Designed for productive machining of unalloyed and alloyed steels, the insert supports process security and repeatability through a combination of geometry and coating technology. The Tiger‑tec Gold technology promotes stable chip formation and a long‑lasting cutting edge, which helps to maintain surface finish and dimensional consistency. For tool planners and production engineers, the result is a measurable improvement in cycle times and fewer unscheduled tool changes. Cutting data and compatible toolholder recommendations are available to assist integration into production cycles. Contact Metav Werkzeuge for availability and tailored cutting recommendations for Walter Tools Tiger‑tec Gold inserts using the SKU LNMU130608R-L55T-WPP35G Technical Data Article number: LNMU130608R-L55T-WPP35G-WALTER Article designation: Fräswendeschneidplatte LNMU130608R-L55T WPP35G Walter Tools ISO designation: LNMU130608R-L55T WPP35G Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Grade: WPP35G Shape: Rectangular Execution: U Tolerance class: M Facts Plate size: 13 Plate thickness: 06 Corner radius: 0.8 mm Free angle: 0° (negative) Special features Tiger‑tec Gold coating technology Coated carbide grade WPP35G Chipbreaker: L55T Material application: steel (ISO P) Suitable for unalloyed and alloyed steels FAQ What materials are suitable for this insert? The LNMU130608R-L55T WPP35G insert from Walter Tools is designed for ISO P (steel) applications, covering unalloyed and alloyed steels typically encountered in general machining tasks. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WPP35G grade increases wear resistance and thermal protection, enabling a more consistent cutting edge under medium to high cutting speeds and improving tool life. How does the L55T chipbreaker influence chip behaviour? The L55T chipbreaker promotes controlled chip formation and evacuation with steels, which enhances surface finish and reduces the risk of built‑up edge and chip entanglement in interrupted or continuous cuts. Is this insert suitable for roughing and interrupted cuts? With its negative rake of 0° and robust rectangular geometry, the Walter Tools LNMU130608R-L55T WPP35G milling insert is well suited to heavier engagements and interrupted cutting typical of roughing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original factory‑new goods of the manufacturer.
LNMU130608R-L55T WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of WSM45X coated carbide and the L55T chipbreaker to secure consistent chip control and long tool life in demanding materials; order directly via Metav Werkzeuge or consult the technical team for machining parameters and optimisation. LNMU130608R-L55T WSM45X – indexable milling insert, coated carbide for rostfreier Stahl and superalloys | Walter Tools The LNMU130608R-L55T WSM45X is an indexable milling insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering stable cutting performance under high thermal and mechanical load. Coated carbide grade WSM45X for heat resistance L55T chipbreaker for reliable chip control Rectangular 13 mm format, 0.8 mm corner radius Negative 0° rake for robust cutting edge Stable chip control for high-demand materials The insert’s L55T chipbreaker is designed to manage long, stringy chips typical of rostfreier Stahl and superalloys, improving process reliability and reducing downtime from chip entanglement. The combination of the WSM45X coated carbide and the dedicated chip geometry promotes secure chip formation and evacuation; this leads to more consistent surface finishes and fewer interruptions during serial production. Where material ductility and heat build-up are problematic, the chip control geometry reduces mechanical and thermal loads on the cutting edge. Robust edge security and thermal resistance A 0° negative rake and a 0.8 mm corner radius provide mechanical strength at the cutting edge, making the insert suitable for interrupted cuts and heavy engagement. The coated carbide grade is tuned for thermal resilience and wear resistance, helping to maintain a stable edge where temperatures rise quickly. For process planners, this translates into extended edge life and predictable tool-change intervals, which support efficiency gains and lower total machining costs over production runs. Practical application advice and expected benefits The rectangular 13 mm format and thickness code ensure compatibility with standard holders for face and shoulder milling applications. When paired with appropriate feeds and moderate cutting speeds for rostfreier Stahl, the geometry delivers repeatable performance and improved surface integrity. Use of this insert can reduce rework rates and contribute to stable component quality in aerospace, power generation and high-performance engineering where superalloys and rostfreier Stahl are common. Contact Metav Werkzeuge to review machining recommendations and secure the right Walter Tools inserts for specific rostfreier Stahl or superalloy applications Technical data SKU: LNMU130608R-L55T-WSM45X-WALTER Label: Fräswendeschneidplatte LNMU130608R-L55T WSM45X Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Designation: LNMU130608R-L55T Execution: U Tolerance class: M Facts Insert size: 13 Corner radius: 0.8 mm Thickness code: 06 Rake angle: 0° (negative) Special features Coated carbide cutting grade WSM45X Chipbreaker: L55T Shape: Rechteck Suitable for rostfreier Stahl and high-temperature superalloys Designed for stable chip formation and robust edge security FAQ What materials is this insert best suited for? The LNMU130608R-L55T WSM45X insert is intended for machining rostfreier Stahl and heat-resistant superalloys, offering a grade and geometry optimised for those material groups. How does the L55T chipbreaker affect machining of rostfreier Stahl? The L55T chipbreaker promotes controlled chip formation and evacuation when cutting rostfreier Stahl, reducing the risk of built-up edge and improving process stability for the insert. Is the insert suitable for interrupted cuts and heavy engagement? Yes; the negative 0° rake combined with a 0.8 mm corner radius gives mechanical edge strength suitable for interrupted cuts and higher radial depths of cut. Can the insert grade be used in high-temperature environments? The WSM45X coated carbide is engineered for improved thermal resistance and wear control, making it appropriate for elevated temperatures that occur when machining difficult alloys. Which toolholders are compatible with the rectangular format? Standard rectangular milling toolholders that accept a 13 size rectangular insert and the LNMU style clamping will be compatible; follow holder manufacturer specifications when mounting the insert. Manufacturer: Walter AG (brand: Walter Tools); Tübingen, Germany
LNMU130608R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold PVD-coated grade that combines stable cutting edge performance with broad material capability for efficient milling of steel, stainless steel and heat-resistant alloys; order via Metav Werkzeuge or consult their specialists for application support or bulk supply. LNMU130608R-L55T WSP45G milling indexable insert by Walter Tools — Tiger·tec Gold, rectangle 0.8 mm corner radius LNMU130608R-L55T WSP45G is a coated carbide milling insert designed for versatile milling tasks in steel, stainless steel and superalloys, offering robust edge integrity for demanding production environments. Tiger·tec Gold PVD-coated grade WSP45G For steel, stainless steel and superalloys Stable cutting edge for demanding milling Rectangle form with 0.8 mm corner radius Coating and grade that sustain productivity The Tiger·tec Gold technology and WSP45G grade deliver a PVD-coated surface engineered for wear resistance and consistent performance. This coating reduces flank and crater wear, enabling longer periods between index changes and thus higher effective machining time. For industrial milling applications the combination of a tough substrate and PVD layers supports reliable chip formation across the P, M and S ISO material groups, translating directly into improved process stability and fewer unplanned tool changes. Geometry tuned for edge security and surface quality The rectangular geometry with a 0.8 mm corner radius and the L55T chipbreaker are configured to promote stable cutting conditions in interrupted and continuous milling. A modest corner radius strengthens the cutting edge against mechanical and thermal loads, reducing the risk of chipping when machining challenging alloys. The negative 0° relief (negative rake) enhances edge robustness under heavy engagement, which helps maintain repeatable surface finishes and predictable tool life in series production. Application scope and machining behaviour Engineered for a wide range of workpieces, this insert is suitable for unalloyed and alloyed steel, austenitic and other stainless steel grades, and heat-resistant superalloys and titanium. The grade is formulated to balance toughness and wear resistance so that chip control and edge life remain dependable even under higher temperatures typical when machining S group materials. The design supports secure chip evacuation and reduces built-up edge tendencies, which is especially relevant when removing material at moderate to heavy depths of cut. Production benefits and cost-efficient handling As an indexable solution, the insert reduces downtime by allowing quick replacement without regrinding a solid tool body. The combination of a robust cutting edge and the WSP45G coating results in predictable tool-change intervals and simplified inventory planning. In mixed-production environments the insert’s versatility lowers the number of different tool grades required, contributing to lower tooling overhead and a streamlined tool management process in the workshop. Contact Metav Werkzeuge for tailored application advice and to request availability of Walter Tools LNMU130608R-L55T WSP45G inserts with Tiger·tec Gold technology. Technical Data Article number: LNMU130608R-L55T-WSP45G-WALTER Product type: milling indexable insert Designation: LNMU130608R-L55T WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Plate size: 13 mm Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Grade: WSP45G Chipbreaker: L55T Shape: rectangle Execution: U Applicable material groups: P / M / S Coating / substrate: PVD-coated carbide (Tiger·tec Gold) FAQ What materials is this insert suited for? The LNMU130608R-L55T WSP45G insert is intended for steel, stainless steel and heat-resistant superalloys/titanium, corresponding to ISO groups P, M and S. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating improves wear resistance and thermal stability, which enhances edge life and machining consistency for the LNMU130608R-L55T WSP45G insert. What does the corner radius mean for milling performance? A 0.8 mm corner radius increases edge strength and reduces the risk of chipping under heavy engagement, helping to maintain surface quality and predictable tool life during milling. Is this insert suitable for interrupted cuts? Yes, the rectangular geometry combined with a negative 0° relief and a robust grade makes the insert appropriate for interrupted as well as continuous milling operations. Which chipbreaker is specified and what is its role? The L55T chipbreaker promotes controlled chip formation and evacuation, supporting stable cutting and reducing the likelihood of built-up edge when using the WSP45G grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU150812-F57T WAK15 Wendeplatten - Walter Tools
The combination of a sharp WAK15 cutting grade, a rectangular geometry and a controlled F57T chipbreaker delivers dependable performance in aluminium machining; robust edge life and predictable chip formation enable efficient production. Order the insert directly via Metav Werkzeuge or consult their technical team for application advice. LNMU150812-F57T WAK15 – Rectangular milling indexable insert for aluminium, Walter Tools The LNMU150812-F57T WAK15 is a rectangular indexable insert engineered for productive machining of aluminium and other non‑ferrous metals, offering a negative free angle and a chipbreaker designed for stable material removal Walter N-series for non‑ferrous metals Uncoated carbide grade WAK15 Rectangular insert, 15 mm edge 0° negative free angle, 1.2 mm radius Increased throughput for non‑ferrous production runs The insert’s combination of WAK15 uncoated cemented carbide and the F57T chipbreaker is tailored for aluminium work, where low adhesion and clean chip formation matter. The geometry reduces built‑up edge and maintains consistent cutting behaviour across a range of feed rates, which translates into shorter cycle times and fewer interruptions for tool changes. For operations that prioritise throughput, the insert’s design supports stable machining under continuous load, helping to keep setups predictable and productivity high. Geometry and edge integrity for reliable surface quality A rectangular geometry with a 1.2 mm corner radius and a 0° (negative) free angle gives the insert mechanical strength at the cutting edge and consistent contact conditions. This combination helps preserve the cutting edge during interrupted cuts and in applications where engagement is variable. The result is improved surface finish and reduced risk of edge chipping, so downstream processes such as finishing or assembly require less rework. The insert’s profile is particularly useful when a stronger edge is needed without sacrificing chip control in softer metals. Integration into existing milling processes with minimal adjustment The insert is compatible with common indexable‑insert toolholders and the Walter N‑series range, enabling straightforward integration into established tool assemblies. Because the grade is uncoated and optimised for non‑ferrous materials, coolant strategy and cutting parameters can be adjusted for chip evacuation rather than thermal protection, simplifying process setup. This makes the insert suitable for both small batch work and repeated production cycles where tool change intervals and machine uptime are critical. Cost efficiency through predictable performance and low maintenance Using an insert intended specifically for aluminium and similar materials reduces the frequency of unexpected tool failures and the need for manual intervention. The predictable wear behaviour of the WAK15 grade and the controlled chipbreaking action contribute to longer effective tool life in the intended material class. Fewer stoppages and reduced scrap rates support lower manufacturing costs over time while maintaining machining quality and repeatability. Contact Metav Werkzeuge for tailored application support and procurement of Walter Tools LNMU150812-F57T WAK15 inserts; specialist advice and delivery options are available from Metav Werkzeuge. Technical data Article number: LNMU150812-F57T-WAK15-WALTER Designation: LNMU150812-F57T Grade: WAK15 Series: Walter N-Sortensystem Manufacturer: Walter Tools Type: Milling indexable insert Data Plate size: 15 Plate thickness: 08 Corner radius: 1.2 mm Free angle: 0° (negative) Special features Rectangular geometry Chipbreaker: F57T Uncoated cemented carbide grade Suitable for aluminium and non‑ferrous metals FAQ What materials is this insert suitable for? The LNMU150812-F57T WAK15 insert is designed for aluminium and other non‑ferrous metals, using a chipformer and grade optimised for those material groups. Is the cutting material coated? No, the insert uses an uncoated cemented carbide grade WAK15, which is chosen to avoid adhesion issues when machining non‑ferrous alloys. How does the 0° free angle affect machining? A 0° (negative) free angle increases edge strength and stability during cutting, which benefits interrupted cuts and applications requiring robust edge integrity. What chip control can be expected with the F57T chipbreaker? The F57T chipbreaker promotes consistent chip formation and evacuation in aluminium machining, reducing the chance of long, tangled chips and improving process reliability. Can this insert be used in standard Walter N‑series toolholders? Yes, the insert is part of the Walter N‑series and is compatible with holders designed for the corresponding insert designation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
LNMU150812-F57T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools' proven Tiger·tec Silver coating, reliable performance on steel and cast iron, and a robust 1.2 mm corner radius for consistent chip control and long tool life; order the inserts directly via Metav Werkzeuge or consult the team for tailored cutting data. LNMU150812-F57T WKP25S indexable milling insert – Tiger·tec Silver for steel and cast iron (Walter Tools) The LNMU150812-F57T WKP25S is a negative‑rake rectangular indexable insert engineered for productive face and slot milling in steel and cast iron applications. Tiger·tec Silver coating for long tool life Suitable for steel and cast iron machining Negative rake, 0° clearance for robust cuts Rectangular form with 1.2 mm corner radius Increased reliability through modern coating technology The Tiger·tec Silver series combines a coated carbide substrate with application‑driven surface engineering to reduce abrasive wear and extend edge life. For mixed production where both unalloyed and alloyed steel and cast materials are present, the insert’s WKP25S grade provides stable performance under the thermal and mechanical stresses typical of these workpieces. The coating reduces flank wear and helps maintain cutting security during longer tool cycles, which supports predictable tool change intervals and steady production output. Robust geometry for consistent chip control and edge security The rectangular geometry with a 1.2 mm corner radius and a negative 0° rake forms a resilient cutting edge suited to interrupted cuts and higher radial engagement. The integrated chipbreaker F57T aids controlled chip formation in the P and K ISO groups, reducing the risk of long, entangling chips and improving surface finish consistency. This combination of geometry and chip control is particularly beneficial when machining tougher cast components or when process reliability is prioritised over purely aggressive removal rates. Practical advantages for process optimisation By selecting this grade and geometry, shops can expect improved repeatability and fewer unplanned interventions. The insert’s specification as an indexable milling grade simplifies inventory management: one insert covers several common turning and milling tasks on steel and cast iron, lowering tool complexity at the toolroom level. For engineers planning toolpaths, the negative relief and stable cutting edge make the grade suitable for conservative feed strategies that favour surface integrity and dimensional stability rather than maximum material removal per pass. Guidance for integration into production When adopting this insert into an existing tool system, match clamping and seat conditions to the ISO designation LNMU150812-F57T WKP25S and confirm the cutter body is compatible with rectangular inserts of the stated thickness and form. The coated carbide substrate of the Tiger·tec Silver series responds well to controlled cooling regimes; for best results, align coolant strategy with the machine’s capabilities and the workpiece material to balance thermal load and edge protection. Documentation for the insert’s intended use in ISO P (steel) and K (cast iron) groups supports straightforward selection in mixed‑material environments. Contact Metav Werkzeuge to obtain cutting data sheets, confirm cutter compatibility and specify the right Walter Tools Tiger·tec Silver inserts for the intended application Technical Data Article number: LNMU150812-F57T-WKP25S-WALTER SKU: LNMU150812-F57T-WKP25S-WALTER ISO designation: LNMU150812-F57T WKP25S Series: Tiger·tec Silver Grade: WKP25S Form: Rectangular Corner radius: 1.2 mm Relief / Rake: 0° (negative) Chipbreaker: F57T Thickness code: 08 Size: 15 Facts Material suitability: Steel (ISO P) Material suitability: Cast iron (ISO K) Coating: Tiger·tec Silver (coated carbide) Tolerance class: M Execution: U Special features Coated carbide grade for abrasive resistance Designed for stable chip formation in P and K groups Rectangular insert geometry for robust cutting edges Negative rake for heavy‑duty engagement FAQ What materials is this insert suitable for? The LNMU150812-F57T WKP25S is developed for machining steel (ISO P) and cast iron (ISO K), with the Tiger·tec Silver coating optimised for those material families. How does the 0° (negative) rake affect machining? A negative 0° rake increases edge strength and reduces the tendency to chip on interrupted cuts, making the insert a good choice for heavy engagement and unstable cutting conditions. What benefit does the 1.2 mm corner radius provide? The 1.2 mm corner radius increases edge robustness and contributes to improved surface finish and longer edge life under moderate feed rates, helping to maintain dimensional stability. Which chipbreaker is used and why does it matter? The chipbreaker F57T is tuned to produce short, controllable chips in both steel and cast iron, aiding chip evacuation and reducing the risk of long, tangled chips in milling operations. Is this insert part of a known series and what does that mean for performance? This insert belongs to the Tiger·tec Silver series by Walter Tools; the series emphasises wear resistance and consistent cutting performance across a broad range of industrial steels and cast materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanation. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
LNMU150812-F57T WKP35G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold coating and the WKP35G grade for extended tool life and stable chip control in demanding steel and cast‑iron milling. Benefit from a robust rectangular geometry with a 1.2 mm corner radius and 0° negative rake for reliable performance; order directly via Metav Werkzeuge or consult the technical team for application support. LNMU150812-F57T WKP35G milling insert, Tiger‑tec Gold coating, for steel and cast iron — Walter Tools The LNMU150812-F57T WKP35G is a rectangular milling insert engineered for productive finishing and roughing in steel (P) and cast iron (K) applications, combining a coated carbide grade with a dedicated chipbreaker for consistent chip formation. Rectangular insert LNMU150812-F57G WKP35G Tiger‑tec Gold coating for high wear resistance For steel (P) and cast iron (K) machining 1.2 mm corner radius with 0° negative rake Prolonged tool life through advanced coating technology The combination of the Tiger‑tec Gold coating and the WKP35G coated‑carbide grade delivers noticeably improved wear resistance and thermal stability during interrupted and continuous cuts. This coating technology reduces flank and crater wear, which translates into fewer tool changes and longer production runs. For operations where consistent component tolerances and reduced tooling costs are priorities, the coated grade offers a measurable advantage by sustaining cutting edge performance under higher temperatures typical of steel machining. The result is greater process reliability and lower overall machining cost per part. Stable cutting and controlled chips for steel and cast iron Designed for the ISO groups P (steel) and K (cast iron), the insert’s chip control is driven by the F57T chipbreaker and a 0° negative rake angle, delivering predictable chip breaking and safe evacuation even in tougher materials. A negative rake geometry increases edge robustness and reduces the risk of chipping during interrupted cuts or plunge milling. The outcome is improved surface quality with fewer rejects and a more dependable cycle time, particularly in mixed‑batch production where both steels and grey or nodular cast irons are processed. Geometry tuned for strength and finishing The rectangular shape with a 1.2 mm corner radius contributes to a balanced mix of edge strength and surface finish. A larger corner radius increases resistance to radial forces and extends edge life, while still permitting acceptable finishing capabilities on machined faces. The insert’s compact dimensions (designation LNMU150812‑F57T) and plate thickness suited to general milling applications provide stability in the tool holder and support consistent machining results within the stated tolerance class M. Practical benefits for shopfloor productivity Adopting this insert supports a streamlined production flow: fewer tool exchanges, reliable chip behaviour, and consistent part quality. The Tiger‑tec Gold series is aimed at shops that value higher tool life and repeatable outcomes across a range of steel and cast‑iron components. If there is any uncertainty about application parameters or cutting data, expert advice is available — Metav Werkzeuge’s technical consultants can assist with cutting speed recommendations and holder compatibility to ensure optimal performance. Contact Metav Werkzeuge for tailored cutting data and application guidance on Walter Tools Tiger‑tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to request personalised recommendations or a quotation Technical data SKU: LNMU150812-F57T-WKP35G-WALTER Product name: LNMU150812-F57T WKP35G Manufacturer: Walter Tools Product type: Milling insert (rectangular) Series: Tiger‑tec Gold Facts Grade: WKP35G Applicable material groups: P (steel), K (cast iron) Corner radius: 1.2 mm Rake angle: 0° (negative) Chipbreaker: F57T Plate size designation: 15 Plate thickness designation: 08 Tolerance class: M Special features Coated carbide grade Optimised chip control for mixed applications Robust negative‑rake geometry Rectangular insert form Suited for finishing and productive roughing in P and K groups FAQ What materials is this insert suitable for? The LNMU150812‑F57T WKP35G is designed for steel (P) and cast iron (K) in accordance with ISO 513 groups; the WKP35G grade and Tiger‑tec Gold coating target the thermal and abrasive demands of these materials. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and resistance to chipping, improving tool life during heavier cuts while still permitting good surface finish when used with appropriate cutting parameters. What role does the F57T chipbreaker play? The F57T chipbreaker is engineered to produce short, controllable chips in typical steel and cast‑iron operations, improving evacuÂation, reducing the risk of re‑cutting chips, and supporting consistent surface quality. Why choose Tiger‑tec Gold grade WKP35G? The WKP35G grade within the Tiger‑tec Gold family offers enhanced wear resistance and thermal stability, resulting in longer tool life and more predictable performance in mixed production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and comparison; there is no affiliation between our company and these brands. The offered item is an original, factory‑new product of the manufacturer.
LNMU150812-F57T WKP35S U Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the robust WKP35S grade for stable, high-performance milling in steel and cast iron; the negative 0° geometry and 1.2 mm corner radius ensure secure chip control and long stand time. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. LNMU150812-F57T WKP35S – Milling insert, Tiger·tec Silver, Walter Tools, for steel and cast iron machining LNMU150812-F57T WKP35S is a rectangular milling insert designed for medium to heavy-duty milling of steel and cast iron, offering a balance of durability and process security Tiger·tec Silver coating for stable cutting Suitable for steel and cast iron machining Negative 0° rake for robust cutting geometry Rectangular insert with 1.2 mm corner radius Consistent machining performance with advanced coating technology The combination of the Tiger·tec Silver coating and the WKP35S grade delivers improved wear resistance and consistent edge stability, which translates into longer tool life and fewer indexings in production cycles. This coating technology is optimised for the typical heat and chip-forming behaviour encountered when machining steel (ISO group P) and cast iron (ISO group K), helping to maintain a steady cutting process and reliable component tolerances. The result is reduced machine downtime and more predictable cycle times for repetitive milling operations. Robust geometry and chip control for secure cutting A negative 0° rake together with the F57T chipbreaker geometry provides a solid cutting edge that resists chipping under interrupted cuts or heavy engagement. The rectangular form and the 1.2 mm corner radius contribute to improved edge strength and distribute cutting forces evenly across the insert, which supports stable tool life in demanding operations. These geometric choices favour secure chip breaking and consistent surface finish while offering tolerance class M for reproducible insert seating and interchangeability. Practical benefits for production efficiency and tool management The insert’s design supports efficient inventory and tool-change strategies: the standardised designation makes it straightforward to identify replacements, and the grade’s balance of wear resistance and toughness reduces consumption in mixed-production environments. The LNMU150812-F57T WKP35S insert is suited to workshops seeking predictable performance when machining steel and cast iron, combining process reliability with manageable tooling costs. Backed by the reputation of Walter Tools, it fits into established tool systems where repeatability and production continuity are priorities. Contact Metav Werkzeuge for tailored application recommendations or to discuss suitable cutter systems and toolholders for this Tiger·tec Silver insert Technical Data Article number: LNMU150812-F57T-WKP35S-WALTER Designation: LNMU150812-F57T WKP35S Product type: Milling insert Manufacturer: Walter Tools Facts Size: 15 Thickness: 08 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger-tec Silver Grade: WKP35S Chipbreaker: F57T Shape: Rectangular Material applicability: P / K (steel / cast iron) FAQ What materials is this insert suitable for? This insert is suitable for machining steel and cast iron; the WKP35S grade and Tiger·tec Silver series are optimised for ISO groups P and K. What are the main geometric advantages of this insert? The negative 0° relief and 1.2 mm corner radius provide a robust cutting edge and reliable chip control under interrupted or heavy cuts. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating improves wear resistance and edge stability, extending tool life and supporting more consistent cycle times with the LNMU150812-F57T WKP35S insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names are stated for clarification and identification purposes only. The offered item is an original, factory-new product of the manufacturer Walter Tools. There is no affiliation between our company and the trademark owners.
LNMU150812-F57T WPP35G Wendeplatten - Walter Tools
Take advantage of a wear-resistant, Tiger·tec Gold-coated carbide grade that delivers stable chip formation and extended edge life for steel machining; order directly via Metav Werkzeuge or request tailored cutting data from our consultants to integrate this insert into existing milling processes. LNMU150812-F57T WPP35G rectangular milling insert — Tiger·tec Gold grade for steel, Walter Tools The LNMU150812-F57T WPP35G is a rectangular milling insert engineered for productive steel machining, combining a coated carbide grade with a chipbreaker optimised for typical steel chip formation. Tiger·tec Gold coated carbide WPP35G Optimised for steel machining (ISO P) 0° negative rake geometry Corner radius 1.2 mm for robust cutting edge High-performance cutting for reliable steel removal The combination of Tiger·tec Gold technology and the WPP35G grade provides a coated carbide surface that resists wear and sustains sharpness under the thermal and mechanical loads typical of steel machining. Designed for the ISO P material group, this specification improves process stability by promoting predictable chip formation and reduced edge breakdown. The negative geometry with a 0° negative rake contributes to controlled cutting forces, making the insert a dependable choice for demanding production runs where consistent tool life and surface quality are required. Stable process economy through fewer interruptions Longer tool life and consistent performance translate into measurable productivity improvements: fewer indexings, reduced tool inventory rotation and more predictable maintenance cycles. The insert’s coating and substrate combination helps maintain a stable cutting edge, which supports repeatable surface finish and dimensional accuracy. For operations aiming to reduce downtime and increase throughput, this behaviour yields direct cost-efficiency benefits by lowering changeover frequency and improving overall mill utilisation. Practical geometry and precise chip control for everyday use The rectangular plate form with a nominal size of 15 and thickness 08 offers a compact, rigid clamping interface that suits many standard LNMU-style holders. The F57T chipbreaker is tailored to steel, assisting in consistent chip control and evacuation to avoid re-cutting and heat concentration. A corner radius of 1.2 mm balances edge strength and achievable surface finish, making the insert appropriate for a range of operations from robust roughing to controlled semi-finishing steps where a resilient edge is advantageous. Contact Metav Werkzeuge for a specification sheet, cutting parameters and application advice regarding the Walter Tools Tiger·tec Gold inserts; request sample data for machining steel and integrate the LNMU150812-F57T WPP35G into production planning via Metav Werkzeuge. Technical data Article number: LNMU150812-F57T-WPP35G-WALTER Label: Fräswendeschneidplatte LNMU150812-F57T WPP35G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Execution: U Tolerance class: M Numbers / Core technical data Size: 15 Thickness: 08 Corner radius: 1.2 mm Rake angle: 0° (negative) Special features / Versions Tiger·tec Gold coated carbide Chipbreaker: F57T Rectangular insert format Optimised for steel (ISO P) Robust cutting edge for productive milling FAQ Which materials is this insert suited for? This insert is optimised for machining steel (ISO P); the WPP35G grade and Tiger·tec Gold coating are tuned for the heat and chip characteristics of steel. What is the role of the F57T chipbreaker? The F57T chipbreaker improves chip control and evacuation when cutting steel, reducing the likelihood of long stringy chips and supporting consistent cutting conditions. How do the geometry and corner radius affect application? The negative rake geometry with a 0° angle and a 1.2 mm corner radius delivers a robust edge that tolerates higher cutting loads while still enabling acceptable surface finish in semi-finishing operations. How is the insert identified and which holders fit it? Identified as LNMU150812-F57T WPP35G (Walter Tools), this rectangular insert fits standard LNMU-style toolholders designed for inserts of this profile and size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com