ADMT160616L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the robust WSP45G grade for reliable chip control and extended tool life; the parallelogram 85° form with a 15° relief angle offers flexible mounting and stable cutting performance. Order the ADMT160616L-F56 WSP45G milling insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160616L-F56 WSP45G milling insert – Tiger·tec Gold, PVD-coated, Walter Tools The ADMT160616L-F56 WSP45G is an indexable milling insert engineered for versatile PVD‑coated milling across steel, stainless steel and high‑temperature alloys in industrial machining. Tiger·tec Gold PVD coating Stable edge with 15° relief angle 1.6 mm corner radius for robustness For steel, stainless and superalloys Consistent chip control for efficient milling The Tiger·tec Gold series brings a PVD-coated carbide grade optimised for demanding milling tasks. The WSP45G grade combines toughness and wear resistance to maintain a stable cutting edge under variable cutting conditions. The integrated chipbreaker F56 encourages reliable chip formation and evacuation, reducing the risk of re-cutting and enabling continuous metal removal. This results in a measurable improvement in process stability and can contribute to lower tool consumption in production environments where consistent chip flow is essential. Durable geometry that reduces rework and downtime A 15° relief angle paired with a 1.6 mm corner radius gives the insert an effective balance between sharpness and edge strength. The parallelogram 85° shape allows flexible seating in milling cutters while delivering a secure cutting engagement. This geometry supports repeatable results and delays edge chipping, which helps to decrease unscheduled tool changes and the associated machine downtime. For operations focused on repeatability, the geometry translates into predictable component quality and fewer finish passes. Broad material capability with industrial reliability Designed for groups P, M and S according to ISO 513, this insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. The WSP45G composition handles the high temperatures and adhesive tendencies typical of these materials, offering improved resistance to build‑up and flank wear. Where workpieces generate significant thermal stress at the cutting zone, this grade helps to maintain contour accuracy and surface finish over longer tool life intervals. Productive choice for milling operations As part of Walter Tools’ Tiger·tec Gold family, the insert offers a practical route to increased productivity; its coating technology and robust grade promote longer tool life and consistent surface quality. The standard size and form make the insert compatible with a wide range of indexable milling cutters, simplifying tool inventory management. For engineering teams seeking predictable results and efficient throughput, this insert represents a balanced option between performance and operational economy. For reliable high‑performance milling with Tiger·tec Gold, contact Metav Werkzeuge for delivery and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT160616L-F56-WSP45G-WALTER Designation: ADMT160616L-F56 WSP45G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Plate size: 16 Plate thickness: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Form: Parallelogram 85° Suitable for: Steel, stainless steel, superalloys FAQ What materials can this insert machine reliably? The ADMT160616L-F56 WSP45G is designed for ISO groups P, M and S, making it suitable for steel, stainless steel and heat‑resistant superalloys. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes controlled chip formation and evacuation; in the ADMT160616L-F56 WSP45G this contributes to stable cutting conditions and reduced re-cutting. Is the insert compatible with standard milling cutter holders? The parallelogram 85° form and nominal size 16 ensure compatibility with many indexable milling cutters designed for this geometry. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and edge stability, extending effective tool life under varying cutting conditions. What does the 1.6 mm corner radius mean for surface finish? A 1.6 mm radius improves edge strength and helps achieve consistent surface quality; it is a compromise between finish and robustness for general milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT160616R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of reliable wear resistance, consistent chip control and broad material capability for uninterrupted milling performance. Order the inserts through Metav Werkzeuge or consult their advisors for application-specific recommendations. ADMT160616R-F56 WKP35G — Milling Indexable Insert, Tiger·tec Gold, for Steel and Cast Iron (Walter Tools) The ADMT160616R-F56 WKP35G is a parallelogram milling insert designed for medium- to high-productivity roughing and finishing in steel and cast iron. ADMT160616R-F56 WKP35G by Walter Tools Tiger·tec Gold coating for high wear resistance Positive 15° relief for stable cutting Suitable for steel and cast iron machining Consistent cutting life through advanced coating technology The ADMT160616R-F56 WKP35G combines Walter Tools’ Tiger·tec Gold coating with a coated carbide substrate to deliver reproducible performance across extended tool life cycles. The coating reduces flank wear and enhances thermal resistance, which supports stable cutting conditions even under fluctuating load. This leads to fewer tool changes, lower downtime and a predictable production rhythm — benefits that matter in both jobbing and serial machining environments. Geometry that improves chip control and surface quality The Parallelogram 85° form and the F56 chipbreaker are engineered to guide chips away from the cutting zone and reduce cutting forces. With a 1.6 mm corner radius and a positive 15° relief, the insert promotes steady engagement with the workpiece, which helps to maintain surface finish and dimensional consistency. The result is reduced rework and a more efficient machining sequence when producing critical components. Broad material compatibility for fewer tool variants Specified for material groups P (steel) and K (cast iron) in accordance with ISO classifications, the grade WKP35G adapts to the heat and abrasion characteristics typical of these materials. The carbide and coating combination is optimised for the chip formation of steels and for the abrasive nature of cast iron, enabling shop-floor flexibility and a reduced need for multiple specialised inserts. Integration into production lines and tooling systems With a straightforward designation and industry-standard dimensions, this insert suits typical cutter bodies that accept 16-size parallelogram inserts and a plate thickness of 06. The Tiger·tec Gold series supports reproducible results and good process security, making the insert a reliable choice for manufacturers who prioritise throughput and consistent quality. The tolerance class M assists with accurate indexation and repeatable seating in the toolholder. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools Tiger·tec Gold inserts — Metav Werkzeuge is available by e‑mail or phone to support selection and delivery. Technical Data Article number / SKU: ADMT160616R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT160616R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Internal designation: ADMT160616R-F56 Facts Insert size: 16 Corner radius: 1.6 mm Relief angle: 15° Plate thickness: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Shape: Parallelogram 85° Substrate: Coated carbide Suitable for: Steel (P) and Cast iron (K) Execution: T FAQ What materials can be machined with this insert? The ADMT160616R-F56 WKP35G insert is designed for steel (P) and cast iron (K) applications according to ISO groupings, offering reliable performance in both materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, which helps to extend tool life and maintain cutting performance in demanding milling operations. Which chipbreaker is fitted and what is its effect? The insert features the F56 chipbreaker, developed to produce controlled chips and reduce cutting forces, improving surface finish and process reliability. Is this insert compatible with standard 16-size cutter bodies? Yes — the insert’s designation and parallelogram form correspond to common cutter systems that accept size 16 inserts and a plate thickness of 06. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation with our company. The offered article is an original, brand-new product from the manufacturer.
ADMT160616R-F56 WKP35S Wendeplatten - Walter Tools
The combination of a robust Tiger·tec Silver coating and the optimised F56 chipformer delivers dependable wear resistance and stable chip control for productive milling of steel and cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160616R-F56 WKP35S milling insert — Parallelogram 85°, R1.6, Walter Tools The ADMT160616R-F56 WKP35S is a parallelogram milling insert engineered for efficient face and shoulder milling in steel and cast iron applications. Tiger·tec Silver coating technology Optimised chipformer F56 for stable chips Parallelogram 85° geometry for axial cuts Suitable for ISO P (steel) and K (cast iron) Prolonged tool life through advanced coating The Tiger·tec Silver coating combined with the WKP35S grade provides a balanced resistance to abrasive wear and thermal loading, which translates into longer intervals between indexings and fewer tool changes. Designed as a coated carbide insert, the surface treatment reduces flank and crater wear during continuous and interrupted cuts, helping to sustain component tolerances over longer production runs. This advantage becomes particularly relevant when machining medium to high-alloy steels and a wide range of grey and ductile cast irons. Consistent chip control and stable cutting performance The insert’s optimised F56 chipformer and its parallelogram 85° geometry ensure controlled chip segmentation and predictable evacuation in both up and down milling. The 15° free angle and the R1.6 corner radius offer a reliable balance between edge strength and surface finish, enabling stable cutting at common feed rates for face milling and shoulder operations. This geometry reduces vibration sensitivity, which supports repeatable dimensional accuracy across batch production. Practical benefits for workshop and production environments Specified for ISO groups P (steel) and K (cast iron), the grade is suitable for a broad material range, reducing the need for multiple specialised grades on the tooling shelf. The insert’s tolerance class M supports consistent seating in standard cutters, simplifying changeover and inspection procedures. For procurement and planning, the standardised designation means straightforward integration into existing tool management systems and clear traceability across production orders. Application guidance and process relevance When combined with appropriate cutter bodies and clamping, this insert supports productive machining strategies that focus on cycle-time reduction and process stability. In practice, the WKP35S grade is recommended where a compromise between wear resistance and toughness is required, for example in mixed production runs of alloyed steels and cast parts. For best results, pair the insert with coolant strategies and cutting parameters aligned to material group and depth of cut to exploit the coating’s thermal properties and the chipformer’s geometry. For a tailored recommendation on inserting the ADMT160616R-F56 WKP35S into existing milling operations, contact Metav Werkzeuge for technical consultation and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT160616R-F56-WKP35S-WALTER SKU: ADMT160616R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT160616R-F56 WKP35S Walter Tools Facts Geometry: Parallelogram 85° Free angle: 15° Corner radius: 1.6 Size: 16 Thickness: 06 Chipformer: F56 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Material suitability: Steel (ISO P) Material suitability: Cast iron (ISO K) Designation: ADMT160616R-F56 Product type: Fräswendeschneidplatte Manufacturer: Walter Tools FAQ What materials is this insert intended for? The ADMT160616R-F56 WKP35S insert by Walter Tools is specified for ISO groups P and K, meaning it is designed for machining various steels and cast irons. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the ADMT160616R-F56 WKP35S increases wear resistance and thermal stability, which helps to extend tool life and maintain consistent cutting performance in continuous milling tasks. Which cutter geometry suits this insert best? The parallelogram 85° form and the F56 chipformer are ideal for face and shoulder milling cutters that require predictable chip flow; these features make the insert well suited to stable axial cutting strategies. What does the R1.6 corner radius mean for surface finish? A corner radius of 1.6 provides a compromise between edge strength and achievable surface quality; the ADMT160616R-F56 WKP35S supports good finish in general-purpose milling while preserving edge robustness. Is the insert compatible with standard clamping systems? Yes, the insert’s tolerance class M and standard designation ADMT160616R-F56 facilitate straightforward seating in many common Walter-compatible cutter bodies and standard toolholders. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Trademarks and product names mentioned are the property of their respective owners. The brand name in the product listing reflects the original manufacturer. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered item is an original, factory-new product of the stated manufacturer.
ADMT160616R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from a combination of high process security, heat-resistant coating and reliable chip control that keeps production steady and predictable. Choose this solution for efficient machining of rostfreier Stahl and high-temperature alloys and contact Metav Werkzeuge for application advice or ordering. ADMT160616R-F56 WSM35G milling insert — Tiger·tec Gold, for rostfreier Stahl and superalloys (Walter Tools) The ADMT160616R-F56 WSM35G is a precision milling insert engineered for demanding operations on rostfreier Stahl and heat-resistant superalloys, offering stable cutting and consistent tool life. Tiger·tec Gold coating for thermal stability Optimised chip control with F56 geometry 15° clearance angle for secure cutting edge support 1.6 mm corner radius for robust performance Consistent performance when machining tough alloys The insert’s Tiger·tec Gold coating and the WSM35G grade combine to provide excellent thermal resistance and edge stability during prolonged cuts. For applications in rostfreier Stahl and temperature-resistant superalloys, this combination reduces the risk of built-up edge and maintains cutting integrity. The result is fewer interruptions for tool changes and a more predictable production rhythm, which supports higher process efficiency and reduced scrap rates. Reliable chip formation and surface quality Equipped with the F56 chipbreaker, the geometry is designed to channel chips reliably away from the cutting zone, improving evacuation in interrupted cuts and shoulder milling. Better chip control leads directly to improved surface finish and reduced rework. The insert’s parallelogram 85° form and 15° clearance help maintain a stable engagement with the workpiece, translating into consistent dimensional accuracy on components produced in rostfreier Stahl. Robust edge life for demanding setups A 1.6 mm corner radius provides mechanical strength at the cutting edge, helping the grade withstand heavier feeds and interrupted cuts without premature chipping. The coated cemented carbide substrate in this series supports repeatable edge performance in continuous production environments. This robustness contributes to longer tool cycles and lower tooling-related downtime, a clear economic advantage for batch and series manufacture. Practical choice for machining strategy and tool management The insert’s designation and format fit common toolholders for indexable milling; the standardised shape simplifies inventory and tool management. Using the ADMT160616R-F56 WSM35G or its equivalent insert allows the integration of a heat-resistant grade into established toolsets, aiding process standardisation. For engineers planning operations on rostfreier Stahl and superalloys, this insert offers a straightforward way to improve cut stability and consistency across multiple machines. Contact Metav Werkzeuge for tailored application support and to specify the Walter Tools Tiger·tec Gold insert for rostfreier Stahl and superalloys — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: ADMT160616R-F56-WSM35G-WALTER Product type: milling indexable insert Designation: ADMT160616R-F56 Grade: WSM35G Facts Insert size: 16 mm Thickness: 06 Clearance angle: 15° Corner radius: 1.6 mm Special features Series: Tiger·tec Gold Chipbreaker: F56 Form: Parallelogram 85° Material applicability: S / M (superalloys and rostfreier Stahl) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT160616R-F56 WSM35G insert is specified for machining rostfreier Stahl and heat-resistant superalloys (S / M), optimised for applications prone to high temperatures and work-hardening. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WSM35G grade increases thermal resistance and edge stability, which extends tool life and supports steady production when cutting rostfreier Stahl and tough alloys. Which cutting situations benefit most from the F56 chipbreaker? The F56 geometry excels in shoulder milling and interrupted cuts where reliable chip control reduces recutting and improves surface quality with minimal intervention. Is the insert compatible with standard ADMT toolholders? The insert follows the ADMT designation and parallelogram 85° form, making it compatible with toolholders designed for that ISO-type insert family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160616R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of WSM45X coated carbide and the F56 chipbreaker for stable chip formation and reliable cutting in rostfreier Stahl; order the insert via Metav Werkzeuge or consult our specialists for process integration. ADMT160616R-F56 WSM45X milling insert — Walter Tools, coated carbide with F56 chipbreaker ADMT160616R-F56 WSM45X is a precision milling insert designed for demanding roughing and semi-finishing of rostfreier Stahl and heat-resistant alloys Coated carbide WSM45X grade F56 chipbreaker for stable chips Suitable for rostfreier Stahl and superalloys Parallelogram 85° with 15° clearance Consistent chip control for challenging materials The insert relies on the WSM45X coated carbide to deliver predictable results when machining materials that tend to form long, sticky chips. Combined with the F56 chipbreaker, the geometry promotes controlled chip formation and evacuation, reducing the risk of build-up on the cutting edge. This results in fewer interruptions, more stable cutting forces and a reduction in rework cycles—key advantages for production-oriented environments that prioritise throughput and component quality. Geometry that supports productivity and tool life The parallelogram 85° shape and 15° clearance angle give a robust cutting edge with a favourable entry angle for heavy cuts. The specified corner radius of 1.6 mm balances edge strength and surface finish, making the insert suitable for heavier passes while maintaining acceptable component tolerances. The standard size code of 16 and thickness code 06 match common milling body pockets, enabling straightforward tool-body integration and fast changeovers on multi-tool setups. Designed for industrial use and straightforward integration Made for series production, the insert’s features reduce process variability: the coated grade supports temperature resistance and edge stability when machining rostfreier Stahl and ISO S materials, while the tolerance class M ensures consistent seating and repeatable positioning in the tool holder. For workshop planners and production engineers, this means shorter qualification times and fewer trial cuts. If further adaptation is needed for a specific cutter body or cutting strategy, technical advice is available to align the insert choice with machining parameters and coolant strategies. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools WSM45X inserts into the workflow and for current availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: ADMT160616R-F56-WSM45X-WALTER Designation: ADMT160616R-F56 WSM45X Product type: milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Facts Size: 16 mm Thickness code: 06 Corner radius: 1.6 mm Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Coated carbide grade WSM45X (beschichtetes Hartmetall) Chipbreaker: F56 Series: Walter Schneidstoffsorte - Serie offen Target materials: rostfreier Stahl (ISO M) and heat‑resistant superalloys / titanium (ISO S) Execution: T Stable edge and supported chip formation for productive machining FAQ What materials is this insert best suited for? The ADMT160616R-F56 WSM45X insert is optimised for rostfreier Stahl (ISO M) and can also be applied to heat‑resistant superalloys and titanium (ISO S) depending on the cutter geometry. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT160616R-F56 WSM45X promotes short, controlled chips and improves evacuation, which helps maintain a stable cutting edge and consistent cycle times. Is the insert compatible with standard milling cutter bodies? The ADMT160616R-F56 format corresponds to common 16-series pockets; the tolerance class M supports repeatable seating, but cutter body compatibility should be verified against the holder’s seat geometry. What operational benefits can be expected in series production? Using the WSM45X grade with the F56 geometry typically leads to improved process reliability, reduced edge build-up when cutting rostfreier Stahl and fewer unscheduled tool changes, supporting higher productivity. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification and explanation only. There is no affiliation between our company and the named brands. The offered item is original factory‑new goods of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADMT160616R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold WSP45G coated grade and the 85° parallelogram form with a 1.6 mm corner radius for reliable chip control and long tool life when machining steel, stainless steel and heat‑resistant alloys; order via Metav Werkzeuge or request advice from our consultants for process optimisation. ADMT160616R-F56 WSP45G milling indexable insert — for steel, stainless steel and superalloys | Walter Tools The ADMT160616R-F56 WSP45G is a coated carbide milling indexable insert designed for high‑productivity milling of steels, stainless steels and heat‑resistant superalloys in industrial machining applications. Tiger‑tec Gold coated carbide grade WSP45G Suitable for steel, stainless steel and superalloys 85° parallelogram form with 1.6 mm corner radius Deliver consistent cycle times with a wear‑resistant grade The insert’s Tiger‑tec Gold coating and WSP45G grade are engineered for stable cutting edges and predictable wear behaviour, which directly supports lower tool consumption and fewer unplanned interruptions. The combination of the coated carbide substrate and the chipbreaker geometry contributes to effective chip control, reducing the risk of rework and machine downtime. For production environments where reproducible cycle time is critical, this grade offers a balance between toughness and wear resistance that helps to sustain cutting performance over longer runs. Reduce setup changes through broad material compatibility Designed for groups P / M / S, the indexable solution covers steel, stainless steel and heat‑resistant alloys, meaning fewer tool changes across mixed‑material production runs. The insert’s geometry — a parallelogram 85° form with a 1.6 mm corner radius — delivers a robust edge for interrupted cuts while still enabling good surface quality. This versatility streamlines process planning and allows machining centres to maintain throughput when handling varied workpiece materials without compromising edge security. Improve process security and surface quality in milling The positive relief angle of 15° and the dedicated F56 chipbreaker promote stable cutting under thermal and mechanical load, supporting both roughing and semi‑finishing tasks where control of built‑up edge and temperature is essential. The insert’s tolerance class M and the specified thickness code ensure reproducible seating and repeatable performance in indexable cutter systems. Together, these design elements enhance process security, reduce burr formation and help maintain consistent component surface finish across batches. For productivity‑critical milling, contact Metav Werkzeuge for tailored cutting data and availability of the Walter Tools Tiger‑tec Gold WSP45G ADMT160616R‑F56 insert — our consultants will advise on optimal application and tooling integration. Technical Data Article number: ADMT160616R-F56-WSP45G-WALTER Product designation: ADMT160616R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Numbers / Core Technical Data Plate size: 16 Corner radius: 1.6 mm Relief angle: 15° Thickness code: 06 Parallelogram angle: 85° Tolerance class: M Special features Grade: WSP45G Coating technology: Tiger‑tec Gold (PVD) Chipbreaker: F56 Form: Parallelogram Applicable materials: P / M / S (steel, stainless steel, superalloys) Execution: T FAQ Is this insert suitable for stainless steel machining? Yes. The ADMT160616R‑F56 WSP45G insert from Walter Tools is specified for ISO group M (stainless steels) and provides improved chip control and edge stability when machining austenitic and other stainless grades. What advantages does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold coating on the WSP45G grade combines thermal resistance and wear protection to extend edge life, promote consistent wear patterns and support higher process reliability in demanding milling applications. For which milling tasks is this insert most appropriate? The insert is suited to high‑productivity milling operations where a balance of toughness and wear resistance is required — typical uses include general milling of steels, semi‑finishing and applications involving interrupted cuts in tougher materials. What are the key geometric specifications to consider? The insert features a parallelogram 85° form with a 1.6 mm corner radius and a 15° relief angle; these parameters influence the achievable surface finish, edge stability and recommended cutting parameters for the toolholder system. How does the F56 chipbreaker perform across materials? The F56 chipbreaker is designed to manage chips effectively across the P / M / S material groups, improving evacuation and reducing the likelihood of re‑cutting chips in both continuous and interrupted cutting scenarios. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only and do not indicate any association between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
ADMT160620R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from a highly productive, wear‑resistant milling solution that combines the Tiger‑tec Gold coating with the WKP35G grade for reliable machining of steel and cast iron; order directly via Metav Werkzeuge or contact the consultants for tailored recommendations. ADMT160620R-F56 WKP35G — Indexable milling insert, Tiger‑tec Gold, 15° relief — Walter Tools The ADMT160620R-F56 WKP35G is an indexable milling insert designed for high‑productivity milling of steels and cast iron with a parallelogram 85° form for stable clamping. Tiger‑tec Gold coating for wear resistance Suitable for steel and cast iron (ISO P/K) Parallelogram 85° form for secure clamping 15° relief angle with 2 mm corner radius Boosted productivity with proven coating technology The Tiger‑tec Gold technology and the WKP35G coated carbide grade deliver a combination of wear resistance and thermal stability that supports higher cutting rates and longer tool life. Designed for the typical heat and chip behaviour when machining steel and cast iron, this cutting grade promotes stable chip formation and reduced flank wear. As the substrate is a coated carbide, predictable edge retention is achieved across a broad range of production conditions, which in turn reduces downtimes for tool change and regrinding. Geometry that delivers machining stability and surface quality The parallelogram 85° form and a relief angle of 15° ensure a secure seating and repeatable cutting geometry. With a 2 mm corner radius, the insert balances edge strength and surface finish, enabling consistent dimensional accuracy under intermittent or heavy engagement. The robust geometry supports reduced vibration and improved process stability, which benefits cycle time and workpiece quality in batch and continuous milling operations. Chip control and application versatility in one grade Equipped with the chipbreaker F56, the insert enables reliable chip control for a wide variety of feeds and depths of cut, reducing the risk of entanglement and facilitating efficient swarf evacuation. Classified for ISO groups P/K, the insert is suitable for machining both unalloyed and alloyed steels as well as cast iron, making it a versatile choice for automotive, general engineering and heavy‑duty workshop environments. The cutting system integrates well into standard indexable cutter bodies and is intended for customers seeking predictable performance and easy process planning. For applications that demand constant results with Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for technical advice and secure supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT160620R-F56-WKP35G-WALTER Article designation: ADMT160620R-F56 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Form: Parallelogram 85° Chipbreaker: F56 Manufacturer: Walter Tools Numbers / Core technical data Relief angle: 15° Corner radius: 2 mm Plate size: 16 mm Thickness: 06 mm Tolerance class: M Materials / Special features Coating / technology: Tiger‑tec Gold Substrate: coated carbide Applicable materials: Steel (P), Cast iron (K) Designation: ADMT160620R-F56 FAQ What materials is this insert suitable for? The ADMT160620R-F56 WKP35G insert is designed for steel and cast iron (ISO P/K), with the WKP35G grade optimised for these material groups. How does the Tiger‑tec Gold coating benefit the machining process? The Tiger‑tec Gold coating on the WKP35G grade increases thermal resistance and reduces abrasive wear, which helps to extend tool life and maintain consistent cutting performance. What is the effect of the chipbreaker F56? The chipbreaker F56 promotes controlled chip formation and evacuation, improving machining safety and reducing the likelihood of chip re‑cutting or workpiece damage. Can the insert be used in standard indexable milling cutters? Yes, the ADMT160620R-F56 WKP35G is intended for use in compatible indexable cutter bodies where a parallelogram 85° insert form is specified. What advantages does the 2 mm corner radius provide? A 2 mm corner radius improves edge robustness for interrupted cuts and contributes to better surface finish and dimensional stability under heavier cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT160620R-F56 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for stable wear resistance and consistent machining of steel and cast iron; the parallelogram 85° form with chipbreaker F56 provides reliable chip control and low cutting forces. Order the ADMT160620R-F56 WKP35S directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT160620R-F56 WKP35S – Indexable milling insert, Tiger·tec Silver by Walter Tools The ADMT160620R-F56 WKP35S is an indexable milling insert in parallelogram 85° form, engineered for productive finishing and semi-finishing of steel and cast iron components. Tiger·tec Silver coating for stable wear resistance WKP35S grade for steel and cast iron machining Parallelogram 85° form with 15° relief angle High productivity through advanced coating and grade The combination of Tiger·tec Silver and the WKP35S cutting grade delivers a balance of heat resistance and abrasion control, which translates into longer tool life and fewer index changes. This makes the insert particularly suitable where continuous, high-volume milling is required: the coating reduces flank and crater wear, while the grade optimises performance on both steel and cast iron, improving overall process efficiency and lowering downtime for insert replacement. Geometry that stabilises cutting and improves surface quality The parallelogram 85° form and the 15° relief angle create positive cutting engagement, reducing the tangential cutting forces and enabling stable milling at varying depths. Combined with the chipbreaker F56, this geometry supports predictable chip formation and evacuation, which in turn helps maintain consistent surface finish. The corner radius 2 contributes to edge strength and aids in producing uniform part geometry with reduced risk of workpiece distortion. Broad applicability for steel and cast iron operations Designed for the ISO groups P and K, the insert is effective across a wide range of unalloyed and alloyed steels as well as grey and nodular cast iron. The insert’s specification supports both finishing and light roughing tasks depending on cutter geometry and process parameters. For operations that require flexibility across workpiece materials, the combination of grade and chip control reduces the need for multiple specialised inserts, simplifying tool management and inventory. Practical handling and integration in tool systems With a nominal size 16 and thickness 06, the insert fits standard milling cutter pockets that accept parallelogram 85° inserts; tolerance class M ensures repeatable seating and alignment in the toolholder. The designation ADMT160620R-F56 identifies both the geometry and the integrated chipbreaker, which assists in quick selection and replacement. Such clarity in design and coding supports process planners and shopfloor staff in maintaining consistent machining parameters and scheduling preventive changeovers. For robust, reliable milling with Walter Tools' Tiger·tec Silver technology, contact Metav Werkzeuge for tailored advice and local availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADMT160620R-F56-WKP35S-WALTER Product type: Indexable milling insert Series: Tiger·tec Silver Grade: WKP35S Brand: Walter Tools Facts Relief angle: 15° Corner radius: 2 Size: 16 Thickness: 06 Tolerance class: M Special features Chipbreaker: F56 Plate form: Parallelogram 85° Material suitability: P / K (steel, cast iron) Designation: ADMT160620R-F56 WKP35S Execution: T FAQ What materials is this insert suitable for? The ADMT160620R-F56 WKP35S is formulated for ISO groups P and K, making it suitable for steel and cast iron machining applications. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WKP35S grade improves heat and wear resistance, which typically extends tool life and supports more consistent cutting performance. What kind of chip control can be expected with chipbreaker F56? The chipbreaker F56 promotes controlled chip formation and evacuation during milling, reducing re-cutting and aiding in surface finish stability. Is the insert compatible with standard parallelogram 85° toolholders? Yes, the parallelogram 85° form and the specified dimensions make this insert compatible with toolholders designed for that geometry, ensuring correct seating and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
ADMT160620R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WSM35G grade and a stable chipformer for reliable machining of stainless steels and heat‑resistant alloys; order original Walter Tools inserts via Metav Werkzeuge or contact our consultants for application support. ADMT160620R-F56 WSM35G milling indexable insert — Tiger‑tec Gold, for stainless steels — Walter Tools ADMT160620R-F56 WSM35G is a coated carbide milling insert designed for heavy machining of stainless steel and heat‑resistant superalloys Tiger‑tec Gold coating for extended tool life WSM35G grade for stainless and superalloys Parallelogram 85° shape for flexible milling 15° relief and 2.0 mm corner radius Increase uptime with optimised coating and grade selection The combination of the Tiger‑tec Gold coating and the WSM35G carbide grade delivers improved wear resistance and thermal stability, which translates into longer tool life and fewer interruptive tool changes. This insert is engineered for demanding tasks such as the machining of stainless steel and heat‑resistant superalloys, where stable cutting edges and controlled chip formation are essential. The coating reduces edge wear under elevated temperatures and supports consistent performance across longer cycles, helping to maintain productivity on series production runs. Consistent chip control and secure cutting edge for challenging materials A well‑designed chipformer and the F56 geometry promote predictable chip breakup and evacuation, which lowers the risk of built‑up edge and improves surface integrity. For operations involving tough, low‑thermal‑conductivity materials, reliable chip control reduces downtime related to chip jams and rework. The insert’s specifications favour secure cutting edges that withstand thermal and mechanical stress, enabling smoother feeds and higher metal removal rates while preserving dimensional accuracy and surface finish. Geometry that enhances versatility and process stability The parallelogram 85° shape and the 15° relief angle make this insert adaptable to a range of milling strategies, from face milling to shoulder operations. The 2.0 mm corner radius supports robust edge strength for interrupted cuts and provides a balance between edge stability and surface quality. Such geometry allows machinists to adopt productive cutting parameters without sacrificing component tolerances, supporting a smoother workflow and reduced need for secondary finishing. Application guidance and industrial relevance Designed primarily for stainless steel and high‑temperature alloys, the insert is particularly suitable where heat generation and adhesion tendencies demand a cutting material that sustains edge integrity. As a coated, indexable milling insert within the Tiger‑tec Gold family, it provides a practical solution for shops seeking predictable performance across a broad materials spectrum. For specific cycle optimisation, combining the insert with appropriate cutter bodies and coolant strategies will further enhance process security and extend wear life. Contact Metav Werkzeuge for application advice, availability of original Walter Tools Tiger‑tec Gold inserts and to arrange a tailored recommendation for specific machining tasks — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data SKU: ADMT160620R-F56-WSM35G-WALTER Article name: Fräswendeschneidplatte ADMT160620R-F56 WSM35G Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Manufacturer: Walter Tools Dimensions / Core data Relief angle: 15° Corner radius: 2 mm Insert size: 16 Thickness: 06 Plate form: Parallelogram 85° Materials & Features Coating: Tiger·tec Gold Chipbreaker: F56 Material suitability: S / M (superalloys/titanium and stainless steels) Execution: T FAQ What materials is this insert best suited for? The ADMT160620R-F56 WSM35G insert from Walter Tools is specified for stainless steels and heat‑resistant superalloys, offering thermal stability and secure chip control for these groups. How does the Tiger‑tec Gold coating benefit milling performance? Tiger‑tec Gold coating on the WSM35G grade improves wear resistance and heat tolerance, which helps the Walter Tools insert maintain cutting edge stability and extend service life under demanding conditions. Which cutter geometries pair well with this insert? Parallelogram cutter bodies and holders that accept 85° inserts are suitable; the combination of the insert’s 15° relief and F56 chipformer supports flexible milling strategies and reliable chip evacuation. Is this insert suitable for interrupted cuts and roughing? Yes, the 2.0 mm corner radius and robust grade make the insert appropriate for interrupted cuts and heavier engagement where edge strength is required. Manufacturer: The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
ADMT160620R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating and versatile P/M/S suitability to keep milling processes productive and predictable; order directly via Metav Werkzeuge or request advice from our consultants for specification matching. ADMT160620R-F56 WSP45G milling insert — Tiger·tec Gold, chipbreaker F56, Walter Tools A robust ADMT160620R-F56 WSP45G milling insert designed for high‑performance milling of steel, stainless steel and heat‑resistant superalloys, offering a stable cutting edge and efficient chip control in demanding production environments Tiger·tec Gold PVD coating for high wear resistance Versatile for steel, stainless and superalloys 15° clearance angle for stable cutting Parallelogram 85° form with r2 corner radius Consistent tool life through advanced coating technology The Tiger·tec Gold coating on this milling insert delivers improved wear resistance and thermal stability compared with uncoated grades, extending component life in serial milling. The PVD‑based coating supports a stable cutting edge, which reduces flank wear under variable cutting conditions and contributes to predictable regrinding intervals. For production planners this means fewer tool changes and more uptime on milling centres. Reliable chip control and edge geometry for secure machining Equipped with chipbreaker F56 and a 15° clearance angle, the insert promotes consistent chip formation and evacuation during face and profile milling. The specified geometry reduces the risk of built‑up edge on tough materials and improves surface integrity. The parallelogram 85° shape and corner radius 2 provide a balance between robustness and finishing performance, making the grade suitable for both light finishing passes and more demanding roughing operations. Broad material capability reduces tool inventory Specified for material groups P / M / S, the insert is suitable for unalloyed and alloyed steel, stainless steels, and heat‑resistant superalloys including titanium—making it a versatile choice for mixed‑material production runs. The grade's composition and coating are optimised for the thermal and mechanical loads typical of these groups, supporting secure chip formation and stable cutting edges across applications, which helps to reduce the number of tool types held in stock. Production benefits and practical handling With a compact plate size designation and a medium tolerance class M, the insert offers repeatable seating and indexability in compatible milling cutters. The combination of Tiger·tec Gold technology and the geometry features delivers a convincing cost‑per‑workpiece ratio in series production, while the proven grade lineage ensures reproducible results batch after batch. This mix of durability and process stability supports shorter citation cycles and predictable machining quality. For high‑duty milling applications, rely on Walter Tools' Tiger·tec Gold insert — contact Metav Werkzeuge to confirm cutter compatibility and order the ADMT160620R-F56 WSP45G directly or request tailored technical advice. Technical data Article number: ADMT160620R-F56-WSP45G-WALTER Manufacturer: Walter Tools Product type: Milling insert (indexable) Facts Free angle: 15° Corner radius: 2 mm Plate size: 16 Plate thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Grade/sort: WSP45G Chipbreaker: F56 Plate form: Parallelogramm 85° Material suitability: P / M / S Series: Tiger‑tec Gold Execution: T FAQ What materials can this insert machine reliably? The ADMT160620R-F56 WSP45G insert is specified for P / M / S groups and is suited for steel, stainless steels and heat‑resistant superalloys including titanium. Which coating technology is used and what advantage does it bring? The Tiger·tec Gold PVD coating on this Walter Tools insert increases wear resistance and thermal stability, helping to extend tool life under industrial milling conditions. How does the chipbreaker affect machining performance? The F56 chipbreaker promotes predictable chip formation and evacuation, supporting surface quality and reducing the likelihood of built‑up edge during both roughing and finishing passes. Is the insert suitable for mixed‑material production environments? Yes, the insert’s P / M / S suitability and robust geometry make it a practical choice where batches include steel, stainless steel and superalloys, helping to lower tooling variety. What does tolerance class M mean for clamping and repeatability? Tolerance class M indicates medium positional accuracy for seating and indexing in compatible toolholders, contributing to reproducible mounting and process stability. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the named brands; the offered item is an original, factory‑new product from the manufacturer.
ADMT160625L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold PVD-coated grade and a robust parallelogram geometry to secure consistent chip control and long tool life in demanding milling operations; order the insert directly via Metav Werkzeuge or contact our consultants for application support. ADMT160625L-F56 WSP45G Milling insert (Tiger·tec Gold) — Walter Tools ADMT160625L-F56 WSP45G is a coated carbide milling insert designed for versatile roughing and semi-finishing of steel, stainless steel and heat-resistant alloys in modern production environments. Tiger·tec Gold PVD-coated grade WSP45G Parallelogram 85° geometry for robust milling 15° clearance angle, 2.5 mm corner radius Proven for steel, stainless and superalloys Extended tool life through advanced coated grade The Tiger·tec Gold grade WSP45G is a PVD-coated carbide engineered for a balance of toughness and wear resistance. This combination reduces flank wear and supports a stable cutting edge under the thermal loads typical for milling operations. As a result, the insert achieves longer tool life and fewer index changes, which helps to maintain productivity and reduce total machining costs. Technical users will appreciate the predictable performance when switching from conventional grades to this modern coating technology. Geometry that stabilises cutting forces and chip flow The parallelogram 85° shape with a 15° clearance angle and 2.5 mm corner radius is tuned for milling where robustness and chip control matter. The geometry directs chips away from the cutting zone and distributes cutting forces over a larger area of the insert, reducing the risk of chipping under interrupted cuts. This leads to steadier spindle loads and improved surface quality on the workpiece while allowing secure clamping in standard milling cutter pockets. Proven material range for demanding alloys Rated for P / M / S applications, the insert is suitable for a wide variety of materials: general Stahl (steel), rostfreier Stahl (stainless steel) and heat-resistant superalloys such as titanium-based materials. The WSP45G grade is formulated to handle the thermal and mechanical challenges presented by these groups, supporting consistent chip formation and reduced built-up edge. For operations where diverse workpiece materials are encountered, this versatility reduces the need for multiple dedicated grades. Practical integration in production workflows The insert is offered in the ADMT160625L-F56 form factor with tolerance class M and thickness code 06, enabling straightforward replacement in compatible toolholders. The integrated F56 chipbreaker supports controlled chip segmentation at typical milling feeds, lowering the likelihood of long, entangling chips and improving operator safety. Combined with the insert dimensions (size code 16) and the proven Tiger·tec Gold technology, the solution is geared towards secure, repeatable performance in series production and jobbing shops alike. For application advice and to secure suitable quantities of this Tiger·tec Gold milling insert, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: ADMT160625L-F56-WSP45G-WALTER Article: ADMT160625L-F56 WSP45G Product type: Milling insert (Fräswendeschneidplatte) Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 2.5 mm Insert size: 16 Thickness code: 06 Tolerance class: M Special features Parallelogram 85° insert shape Chipbreaker: F56 Coating: Tiger·tec Gold (PVD-coated) Applicable materials: Steel (P), Stainless steel (M), Superalloys / Titanium (S) FAQ What materials is this insert suitable for? The ADMT160625L-F56 WSP45G insert in the Tiger·tec Gold family is suitable for steel, stainless steel and heat-resistant superalloys, covering ISO groups P, M and S. What are the key geometry benefits of the insert? The parallelogram 85° shape with a 15° clearance and a 2.5 mm corner radius improves chip control and distributes cutting forces to reduce the risk of chipping during interrupted cuts. Which chipbreaker is integrated and what does it do? This insert features the F56 chipbreaker, designed to promote short, controllable chips at typical milling feeds, enhancing productivity and operator safety. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating increases wear resistance while retaining edge toughness, which contributes to longer tool life and consistent performance under varying thermal loads. Is this insert compatible with standard toolholders? The insert form ADMT160625L-F56 corresponds to common milling pocket geometries; compatibility should be verified with the toolholder manufacturer based on form and tolerance class M. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160625R-F56 WKP35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and the stable parallelogram geometry for uninterrupted production. The insert's 15° clearance and 2.5 mm corner radius ensure predictable chip formation and long edge life; order the ADMT160625R-F56 WKP35G directly via Metav Werkzeuge or consult our technical team for application support. ADMT160625R-F56 WKP35G — Indexable milling insert, Tiger‑tec Gold, for steel and cast iron — Walter Tools The ADMT160625R-F56 WKP35G is a parallelogram 85° indexable milling insert from the Tiger‑tec Gold series, designed for productive milling of steel and cast iron in demanding industrial applications Tiger‑tec Gold coating for extended tool life Suitable for steel and cast iron machining 15° clearance angle, parallelogram 85° 2.5 mm corner radius for stable cutting Maximise productivity with consistent edge life The coated WKP35G grade combines a wear-resistant Tiger‑tec Gold surface with optimised substrate toughness to provide edge stability during both roughing and semi-finishing operations. This results in fewer insert changes and reduced non-productive time, which directly improves machine utilisation. The indexable insert geometry and robust coating are specifically aimed at keeping process parameters stable when machining common steels and cast irons, so cycle times can be shortened without sacrificing tool life. Predictable chip control and surface quality The insert's F56 chipbreaker and parallelogram 85° form produce consistent chip shaping under varying cutting conditions, improving transport away from the cutting zone and reducing the risk of built-up edge. The 15° clearance angle and 2.5 mm corner radius help to dampen vibrations and deliver a reliable surface finish, while maintaining tolerance stability over multiple indexings. For production settings where repeatability matters, these geometric features translate into fewer rework cycles and a steadier quality output. Practical integration into tooling systems With its standard designation and compact dimensions, this insert fits established milling holders for efficient replacement and set-up. The combination of size code 16, thickness 06 and the ADMT160625R-F56 geometry enables machining strategies that balance material removal rate and tool life. For machining centres seeking a straightforward upgrade, the insert offers a pragmatic route to increased throughput with limited process alteration. If additional technical data are required for toolholder selection or cutting parameter optimisation, Metav Werkzeuge’s consultants are available to provide targeted recommendations. Order the Walter Tools Tiger‑tec Gold ADMT160625R-F56 WKP35G via Metav Werkzeuge for reliable, high-productivity milling — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT160625R-F56-WKP35G-WALTER Article designation: ADMT160625R-F56 WKP35G Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Plate size: 16 Plate thickness: 06 Corner radius: 2.5 mm Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Grade: WKP35G (coated cemented carbide) Chipbreaker: F56 Material groups: Steel (P), Cast iron (K) Execution: T Suitable applications: productive milling, roughing and semi-finishing FAQ Which materials is this insert designed for? The ADMT160625R-F56 WKP35G insert from Walter Tools is intended for machining steel (P) and cast iron (K) as specified by its WKP35G grade and Tiger‑tec Gold coating. How does the Tiger‑tec Gold coating benefit performance? The Tiger‑tec Gold coating on the WKP35G grade increases wear resistance and promotes stable chip formation, extending insert life and improving productivity in industrial milling. What does the F56 chipbreaker provide? The F56 chipbreaker offers reliable chip control across a range of cutting conditions, reducing chip entanglement and supporting consistent surface quality during milling. What are the key geometry parameters to consider for toolholder selection? Consider the parallelogram 85° plate form, 15° clearance angle, plate size 16 and thickness 06 when selecting a compatible milling holder for predictable seating and rigidity. Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
ADMT160625R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for durable, productive machining; the parallelogram 85° geometry and 2.5 mm corner radius deliver stable cutting and reliable edge life. Order the insert directly via Metav Werkzeuge or ask the technical consultants for application advice. ADMT160625R-F56 WKP35S milling insert (Parallelogram 85°, 2.5 mm radius) – Walter Tools An ADMT160625R-F56 WKP35S is a coated carbide milling insert designed for versatile steel and cast iron machining in demanding production environments. Tiger·tec Silver coating for wear resistance Suitable for steel and cast iron Parallelogram 85° geometry for stable cutting 2.5 mm corner radius for robust edge Consistent performance for steel and cast iron The WKP35S grade, realised within the Tiger·tec Silver series, is a coated carbide solution optimised for the machining of steel (P) and cast iron (K) according to ISO groupings. The combination of substrate and multilayer coating improves wear resistance and maintains a stable cutting edge under thermal and mechanical load. For production runs where repeatable surface finish and predictable tool life matter, this configuration reduces the frequency of tool changes and supports steady cycle times while preserving component quality. Geometry engineered for stable, predictable cutting The parallelogram 85° profile, paired with a 15° relief angle and a 2.5 mm corner radius, is designed to absorb cutting forces and minimise vibration during milling. The F56 chipbreaker directs chip flow and promotes controlled chip segmentation when machining both short- and medium-chip-forming materials. These geometric choices result in improved process stability, reduced tool chatter and a consistent cutting behaviour that facilitates reproducible parts and easier process qualification. Productivity gains and predictable tool life By combining a wear-resistant coating with a grade tuned for typical steel and cast iron chips, this insert supports higher productivity and lower overall tooling costs through extended life and fewer interruptions. The WKP35S grade is particularly aimed at shops seeking consistent performance across batch sizes; its balanced properties enable conservative feeds for excellent finishes or more aggressive parameters where productivity is required. The durable edge and optimised chip control also contribute to reduced machine downtime and more predictable maintenance intervals. For robust, repeatable milling performance choose the Walter Tools ADMT160625R-F56 WKP35S through Metav Werkzeuge — contact Metav Werkzeuge for procurement and application details at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: ADMT160625R-F56-WKP35S-WALTER Product designation: ADMT160625R-F56 WKP35S Product type: milling insert (indexable) Manufacturer: Walter Tools Material designation: P / K Facts Size: 16 mm Corner radius: 2.5 mm Relief angle: 15° Thickness code: 06 Form: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Execution: T Suitable for: steel (P), cast iron (K) Applicable material groups: steel and cast iron FAQ Which materials is this insert intended for? The ADMT160625R-F56 WKP35S is made for machining steel and cast iron (ISO groups P and K), offering a balance between wear resistance and chip control for both material families. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade increases resistance to abrasive and adhesive wear, extending edge life and improving process stability under typical steel and cast iron cutting conditions. How does the F56 chipbreaker affect machining? The F56 chipbreaker shapes and breaks chips to improve evacuation and reduce recutting; this results in more consistent surface finishes and lower risk of chip-related interruptions. Why is the parallelogram 85° shape beneficial? The 85° parallelogram geometry optimises the approach angle for stable cutting forces and improved tool support, which helps reduce vibration and maintain dimensional accuracy in serial production. Is the 2.5 mm corner radius suitable for heavy cuts? A 2.5 mm corner radius provides a robust cutting edge that tolerates higher mechanical loads and increases resistance to edge chipping, making it well suited to more demanding machining tasks. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes; there is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
ADMT160625R-F56 WSM35G T Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, a stable cutting edge and optimised chip control to secure consistent production when machining stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or request technical consultation from our specialists. ADMT160625R-F56 WSM35G milling insert, Tiger·tec Gold, Walter Tools — for stainless steels and superalloys ADMT160625R-F56 WSM35G is a Tiger·tec Gold milling insert designed for demanding machining of stainless steels and heat‑resistant superalloys, offering a balance of wear resistance and edge stability in tough applications. Tiger·tec Gold coating for long tool life Stable cutting edge for heavy‑duty machining Optimised chipbreaker F56 for controlled chips Suitable for stainless steels and superalloys High wear resistance and thermal stability for tough materials The ADMT160625R‑F56 WSM35G insert is built around the Tiger·tec Gold coating and a dedicated substrate that together increase resistance to thermal and abrasive wear. This combination improves process reliability when tackling demanding materials: stainless steels (ISO group M) and heat‑resistant superalloys and titanium alloys (ISO group S). The enhanced surface finish and predictable wear curve reduce unplanned tool changes; the built‑in balance of hardness and toughness supports longer cutting cycles and more consistent component quality. Consistent chip control and secure cutting geometry Chip management is central to stable metalcutting. The chipbreaker F56 has been optimised to produce short, controllable chips under heavy engagement, lowering the risk of chip re‑cutting and improving coolant access. The insert’s parallelogram 85° form and 2.5 mm corner radius provide a compromise between robust edge strength and good surface finish, while the 15° clearance helps reduce rubbing and heat generation. These geometric choices translate into fewer secondary operations and higher first‑pass accuracy. Easy integration into productive tool systems As an indexable insert with thickness code 06 and standard fitment, this grade slides into established milling holders with minimal setup. The manufacturing tolerances (class M) and repeatable edge geometry facilitate quick index changes and predictable tool life planning. Combined with Walter Tools’ series characteristics, this insert supports continuous production environments where uptime, reproducibility and process security are priorities — ideal for shops machining corrosion‑resistant components or high‑temperature alloys. For process‑critical machining of stainless steels and superalloys, contact Metav Werkzeuge for tailored advice and to secure the Walter Tools ADMT160625R‑F56 WSM35G inserts — eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data Article number: ADMT160625R-F56-WSM35G-WALTER Product designation: ADMT160625R-F56 WSM35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / milling insert Series: Tiger‑tec Gold Facts Corner radius: 2.5 mm Relief / clearance angle: 15° Insert size: 16 Thickness code: 06 Tolerance class: M Special features Grade / sort: WSM35G Chipbreaker: F56 Form: Parallelogram 85° Execution: T Material suitability: S / M (superalloys/titanium and stainless steels) FAQ What materials is this insert designed for? The WSM35G grade is intended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S); the Tiger·tec Gold technology supports secure chip formation and edge stability under high temperatures. How does the chipbreaker influence performance? The chipbreaker F56 is tuned for controlled, short chips during heavy engagement, improving coolant penetration and reducing the likelihood of chip entanglement in milling operations with the ADMT160625R‑F56 insert. Is the geometry suitable for roughing or finishing? The insert’s 2.5 mm corner radius and parallelogram 85° shape offer a robust cutting edge for heavier passes while still delivering acceptable surface quality; specific holder choice and cutting parameters determine final suitability for roughing or finish passes. What mounting and fitment details are relevant? The insert uses standard indexable insert fitment with thickness code 06 and tolerance class M; the 15° clearance aids in preventing rubbing and supports reliable seating in compatible milling holders. What advantages does Tiger·tec Gold provide in practice? Tiger·tec Gold coating on WSM35G increases wear resistance and maintains edge integrity at elevated temperatures, leading to longer tool life and more consistent component dimensions under demanding machining conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. There is no connection between our company and the named brands. The item offered is an original, factory‑new product of Walter Tools.
ADMT160625R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the PVD-backed Tiger·tec Gold grade and the robust F56 chipbreaker for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160625R-F56 WSP45G milling insert – Parallelogram 85°, R=2.5 mm | Walter Tools The ADMT160625R-F56 WSP45G is a PVD-coated Tiger·tec Gold milling insert designed for reliable peripheral and face milling in a wide range of materials, especially suited to operations demanding stable cutting edges and predictable chip flow Tiger·tec Gold PVD-coated carbide Versatile for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 2.5 mm radius 15° clearance angle and robust F56 chipbreaker Consistent wear resistance from advanced coating technology The Tiger·tec Gold grade, realised in the WSP45G composition, provides a PVD-protected carbide substrate that prioritises abrasion resistance and edge stability. The resulting combination reduces flank wear under cyclic loads and supports longer tool life, which directly lowers tool-change frequency and unplanned downtime. For machining operations that alternate between finishing and semi-finishing passes, the coating contributes to repeatable surface quality and predictable regrinding intervals, enabling planned maintenance windows and improved production planning. Geometry engineered for secure cutting and reliable chip control A parallelogram 85° form with a 2.5 mm corner radius and a 15° clearance angle gives the insert mechanical robustness and favourable cutting-vector orientation. The integrated F56 chip control geometry guides chips away from the cutting zone and reduces the risk of built-up edge on demanding passes. The net effect is a steady cutting process with lower vibration and more uniform force transmission into the toolholder, supporting higher feed stability and reducing the likelihood of surface defects. Broad applicability across demanding workpiece materials The grade is specially tuned for the ISO groups P / M / S, making it suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys (including titanium alloys where indicated). The formulation supports secure chip formation in sticky or tough materials and helps manage the thermal load at the cutting edge. Where material behaviour tends to cause smearing or adhesions, the insert’s coating and chipbreaker combination enhance process security and help maintain consistent dimensional accuracy throughout a tool life cycle. Process benefits that improve productivity and reproducibility The insert combines coating performance and stable cutting geometry to deliver measurable production advantages: extended wear intervals, predictable edge condition and consistent surface finish. The ADMT160625R-F56 WSP45G insert supports efficient cycle planning and reduces process variability, which in turn improves first-pass yields and lowers overall machining cost per component. For operations where repeatability and uptime matter, this insert offers the technical basis for reproducible results and economic machining across small and large batch sizes. For Tiger·tec Gold performance and application advice, contact Metav Werkzeuge for procurement and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: ADMT160625R-F56-WSP45G-WALTER Product label: Fräswendeschneidplatte ADMT160625R-F56 WSP45G Walter Tools Grade: WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions & geometry Size code: 16 Thickness code: 06 Corner radius: 2.5 mm Clearance angle: 15° Form: Parallelogram 85° Materials & features Coating: Tiger·tec Gold (PVD) Substrate: Coated carbide Chipbreaker: F56 Applicable materials: P (Stahl); M (rostfreier Stahl); S (superalloys / titanium) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT160625R-F56 WSP45G insert is designed for ISO groups P, M and S, meaning it is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including demanding titanium alloys where appropriate. How does the F56 chipbreaker improve machining? The F56 chipbreaker on the insert promotes controlled chip formation and evacuation, which reduces the risk of built-up edge and aids consistent surface finish when machining with the Tiger·tec Gold-coated grade. Which cutting applications benefit most from this insert? Peripheral and face milling operations that require a stable cutting edge and reproducible results benefit most; the insert’s geometry and coating are optimised for finishing and semi-finishing passes under varying load conditions. Is the insert compatible with standard toolholders for the ADMT geometry? Yes, the ADMT geometry conforms to common toolholder interfaces for parallelogram-style milling inserts; ensure the seat and clamping arrangement match the ADMT160625R-F56 designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160630L-F56 WKP35S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WKP35S grade delivers stable chip formation and consistent edge life, keeping machining cycles productive. Take advantage of the geometry-optimised insert for reliable steel and cast-iron milling and contact Metav Werkzeuge for application advice or order details. ADMT160630L-F56 WKP35S indexable milling insert – Walter Tools, Tiger·tec Silver, for steel and cast iron The ADMT160630L-F56 WKP35S is a parallelogram 85° milling insert designed for efficient finishing and semi-finishing in P (steel) and K (cast iron) applications. Tiger·tec Silver coating technology Suitable for steel and cast iron 15° relief angle for stable cutting Parallelogram 85° insert geometry Process reliability through advanced coating and grade The Tiger·tec Silver coating combined with the WKP35S grade provides a balanced response to the thermal and abrasive loads typical when machining P (steel) and K (cast iron) groups. The coating technology reduces built-up edge and supports consistent chip control, while the grade’s coated carbide substrate gives wear resistance in mixed production runs. As a result, cycle times remain steady and tool-change intervals are extended, which supports predictable productivity in batch and job-shop environments. Geometry engineered for stable cutting and surface quality Parallelogram 85° geometry and the specified 15° relief deliver a sturdy cutting edge that resists vibration when facing interrupted cuts or varying engagement depths. The insert’s corner radius (3) and the F56 chipbreaker work together to shape short, controllable chips and to maintain surface integrity on the workpiece. This geometry-focused design reduces chatter and helps produce consistent finishes, making the insert suitable for operations that demand repeatable part quality. Practical integration and economic performance Marked as ADMT160630L-F56 WKP35S, the insert fits industry-standard milling toolholders for indexable tooling and is straightforward to replace when resharpening is needed or when a new edge is required. The combination of reliable edge life and efficient chip evacuation reduces unproductive time and can lower total machining cost per part. For operations running mixed batches of steel and cast iron, this insert provides a practical compromise between tool life and consistent machining results. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver inserts and find the right ADMT160630L-F56 WKP35S configuration for specific steel or cast-iron applications Technical data Article number: ADMT160630L-F56-WKP35S-WALTER Name: ADMT160630L-F56 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Relief angle: 15° Corner radius: 3 Plate size: 16 Plate thickness: 06 Insert form: Parallelogram 85° Special features Coating: coated carbide (Tiger·tec Silver) Chipbreaker: F56 Application: P (steel) and K (cast iron) Tolerance class: M Designation without grade: ADMT160630L-F56 FAQ What materials is this insert intended for? The ADMT160630L-F56 WKP35S is designed primarily for P (steel) and K (cast iron) machining, reflecting the WKP35S grade and Tiger·tec Silver coating. Which chip shape can be expected with the F56 chipbreaker? The F56 chipbreaker on this insert promotes short, controlled chips suitable for stable chip evacuation in steel and cast-iron operations. How does the parallelogram 85° geometry affect cutting? The parallelogram 85° insert form improves axial engagement and provides a robust cutting edge, which contributes to reduced vibration and consistent surface finish. Is this insert compatible with standard indexable milling holders? Yes, the ADMT160630L-F56 WKP35S is a standard indexable milling insert intended for common milling toolholders that accept the specified insert geometry. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal and abrasive resistance, supporting longer edge life and better performance across mixed-production runs in steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are cited for clarification only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
ADMT160630L-F56 WSP45G F56 Wendeplatten - Walter Tools
Take advantage of the combination of long edge life and versatile material compatibility to keep milling processes stable and productive; the PVD-backed Tiger·tec Gold grade and the robust R3 corner radius ensure reliable chip control and cutting-edge durability. Order directly via Metav Werkzeuge or consult for process optimisation. ADMT160630L-F56 WSP45G (ADMT160630L-F56) milling insert — Tiger·tec Gold, Walter Tools A ADMT160630L-F56 WSP45G milling insert designed for versatile milling of steel, stainless steel and heat-resistant superalloys, combining a tough PVD-coated grade with an axial-friendly parallelogram geometry Tiger·tec Gold PVD coating for wear resistance Versatile for steel, stainless and superalloys Parallelogram 85° geometry for axial milling 15° relief and R3 corner for edge stability Consistent cutting performance for diverse materials The WSP45G grade, part of the Tiger·tec Gold series, is a PVD-coated carbide developed for high process reliability when machining a wide range of materials, including unalloyed and alloyed steel, stainless steel and heat-resistant superalloys. The coating and substrate combination is engineered to support stable chip formation, which reduces the risk of built-up edge and irregular wear. For practical terms: a grade optimised for heat management and edge stability will maintain dimensional consistency across longer tool life, lowering downtime and tool changes. Robust edge life and measurable benefits for productivity A combination of the 15° relief angle and R3 corner radius gives the insert mechanical strength at the cutting edge while allowing sufficient edge-support for interrupted or heavy cuts. This geometry is aimed at balancing edge stability with surface finish requirements; the rounded corner helps distribute cutting forces, which often results in fewer edge failures and a longer service interval. The tangible result for production is improved uptime and more predictable tool-change intervals. Geometry engineered for efficient milling cycles The parallelogram 85° insert shape is particularly suited to axial milling operations where positive lead and entry conditions are required. This geometry enables effective chip evacuation and reduces radial cutting forces in many applications, which can be advantageous when optimising machining strategies for both roughing and finishing passes. The F56 chipbreaker is matched to the grade to support controlled chip segmentation, improving safety and reducing the need for secondary chip management measures. Practical application and process integration Specification details such as the insert thickness and tolerance class support straightforward integration into existing toolholders. The plate is supplied in the standard M tolerance class and the execution variant labelled T, which are commonly used in industrial setups for consistent mounting and predictable runout behaviour. For process planning, the combination of Tiger·tec Gold technology and the insert’s geometry can reduce the number of different grades required across a machine park, simplifying inventory while preserving machining performance. Discuss Tiger·tec Gold milling solutions with Metav Werkzeuge for tailored process advice and quoting — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT160630L-F56-WSP45G-WALTER Designation: ADMT160630L-F56 WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions & Core Specs Plate size: 16 Plate thickness: 06 Corner radius: R3 Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Execution: T Materials & Special Features Grade: WSP45G (PVD-coated carbide) Material application: steel (P), stainless steel (M), superalloys/titanium (S) Suitable for axial milling applications Robust edge stability and controlled chip formation Parallelogram geometry for effective chip evacuation FAQ What materials can be machined with this insert? The ADMT160630L-F56 WSP45G insert is specified for steel, stainless steel and heat‑resistant superalloys (ISO groups P, M, S), making it suitable for varied production tasks. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and helps manage heat at the cutting edge, which typically results in longer tool life and more consistent surface quality. Is the insert geometry suitable for both roughing and finishing? Yes, the parallelogram 85° shape combined with the F56 chipbreaker provides good chip control and reduced radial forces, allowing use in both roughing and finishing cycles depending on cutting data. What does the R3 corner radius imply for cutting forces? A 3 mm corner radius offers improved edge strength and distributes cutting forces over a larger area, which reduces the likelihood of edge chipping under heavy or interrupted cuts. Which series and grade should be stocked for flexible operations? Keeping stock of the Tiger·tec Gold series in the WSP45G grade alongside a range of insert sizes like this ADMT160630L‑F56 allows flexibility across steels, stainless and high-temperature alloys while simplifying inventory. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.*
ADMT160630R-F56 WKP35G Wendeplatten - Walter Tools
Fräswendeschneidplatte ADMT160630R-F56 WKP35G von Walter Tools für Stahl und Gusseisen ADMT160630R-F56 WKP35G ist eine Hochleistungs-Fräswendeschneidplatte zur produktiven Zerspanung von Stahl und Gusseisen. Tiger·tec Gold Beschichtung für lange Standzeit Optimierte Spanformer F56 für stabile Spanabfuhr Parallelogramm 85° Form für vielseitige Einsatzwinkel FreiWinkel 15° sorgt für zuverlässige Schneidkante Eckenradius 3 für robuste Kantentragfähigkeit Hohe Prozesssicherheit und Wirtschaftlichkeit durch Beschichtung Die Tiger·tec Gold Beschichtung kombiniert Verschleißschutz und Wärmeleitfähigkeit, wodurch die Wendeschneidplatte besonders wirtschaftlich im Dauereinsatz arbeitet. Nutzer profitieren von konstanter Schneidkantenstabilität und reduzierten Maschinenstillständen. Durch die beschichtete Hartmetallsorte WKP35G ergeben sich längere Standzeiten bei der Bearbeitung von Stahl und Gusseisen, was die Teilekosten pro Werkstück spürbar senkt. Geometrie, Spanbildung und Ergebnisqualität Die Parallelogramm-Form mit 85° und ein FreiWinkel von 15° erzeugen eine kontrollierte Spanbildung und schonen die Schneidkante. Der eingebaute Spanbrecher F56 unterstützt die Spanteilung speziell bei bruchfreudigen Gussmaterialien, während der Eckenradius 3 die Kantentragfähigkeit erhöht. Das Resultat sind reproduzierbare Oberflächen und eine gleichmäßige Werkzeugstandzeit bei Serienfertigung. Einsatzfelder und Materialanpassung Die Wendeschneidplatte ist für die Bearbeitung von Stahl (ISO-Gruppe P) und Gusseisen (ISO-Gruppe K) konzipiert. ISO-Kennzeichnungen stehen für die Materialgruppen: P für unlegierte und legierte Stähle, K für abrasive Gusswerkstoffe mit kurzbrechenden Spanbildern. Durch diese Ausrichtung eignet sich die Platte sowohl für universelle Fräsaufgaben als auch für produktive Hochleistungsprozesse in der Serienfertigung. Praxistauglichkeit, Montage und Wirtschaftlichkeit Die Ausführung T und die kompakte Plattendicke 06 bieten eine stabile Sitzlage im Plattensitz und einfache Handhabung beim Werkzeugwechsel. Anwender schätzen die Kombination aus robuster Mechanik und moderner Schneidstofftechnologie, weil sie den Bearbeitungsprozess sicherer und planbarer macht. Die Platte eignet sich besonders für Fertigungsumgebungen, in denen Standzeit und Reproduzierbarkeit über Wirtschaftlichkeit entscheiden. Für besonders produktive Fräsaufgaben die Tiger·tec Gold Sorte WKP35G einsetzen und eine Anfrage direkt an Metav Werkzeuge richten: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: ADMT160630R-F56-WKP35G-WALTER Marke: Walter Tools Produktart: Fräswendeschneidplatte Serie: Tiger-tec Gold Sorte: WKP35G Daten FreiWinkel: 15° Eckenradius: 3 Plattengröße: 16 Plattendicke: 06 Toleranzklasse: M Besonderheiten Plattenform: Parallelogramm 85° Spanbrecher: F56 Material: P / K (P = Stahl, K = Gusseisen) Ausführung: T Bezeichnung: ADMT160630R-F56 ISO-Bezeichnung: ADMT160630R-F56 WKP35G FAQ Was zeichnet die Beschichtung Tiger·tec Gold bei dieser Wendeschneidplatte aus? Die Tiger·tec Gold Beschichtung der Fräswendeschneidplatte sorgt für verbesserten Verschleißschutz und höhere Wärmebeständigkeit, wodurch die Standzeit der ADMT160630R-F56 WKP35G bei der Bearbeitung von Stahl und Gusseisen verlängert wird. Für welche Werkstoffe ist die Platte besonders geeignet? Die Platte ist auf ISO-Gruppe P (Stahl) und K (Gusseisen) ausgelegt, daher eignet sich die ADMT160630R-F56 WKP35G besonders für unlegierte und legierte Stähle sowie abrasive Gusswerkstoffe. Welche Vorteile bringt der Spanbrecher F56 in der Praxis? Der Spanbrecher F56 fördert eine kontrollierte Spanteilung, reduziert Spanverwicklungen und verbessert so die Prozessstabilität bei der Serienbearbeitung mit der Fräswendeschneidplatte von Walter Tools. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Ein Eckenradius von 3 erhöht die Kantentragfähigkeit und reduziert Mikroausbrüche, was zu gleichmäßigeren Oberflächen und längeren Werkzeugstandzeiten bei der ADMT160630R-F56 WKP35G führt. Ist die Platte für Hochleistungs-Fräsoperationen geeignet? Ja, die Kombination aus beschichtetem Hartmetall, optimierter Geometrie und Spanformer macht die Platte geeignet für produktive Hochleistungsprozesse in der Serienfertigung. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160630R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver wear resistance and the WKP35S grade for reliable machining of steel and cast iron; the parallelogram 85° geometry with a 3 mm corner radius ensures stable cuts and consistent surface quality. Order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. ADMT160630R-F56 WKP35S — Fräswendeschneidplatte by Walter Tools (Tiger·tec Silver, P/K application) ADMT160630R-F56 WKP35S is a coated carbide milling insert designed for productive machining of steel and cast iron in ISO material groups P and K. Tiger·tec Silver coating for high wear resistance Optimised WKP35S grade for steel and cast iron Parallelogram 85° shape with 3 mm corner radius F56 chipbreaker for controlled chip formation 15° clearance angle for axial stability Reduce cycle time with a grade tuned to P and K materials The combination of the WKP35S coated carbide grade and the Tiger·tec Silver coating delivers a balance of wear resistance and edge robustness that is particularly effective when machining ISO group P (steel) and K (cast iron). The coating reduces flank and crater wear under the thermal and mechanical loads typical for steel turning and milling, which extends tool life and reduces the frequency of index changes. As a result, production runs benefit from fewer interruptions and more predictable tooling costs, contributing directly to improved process economics. Geometry that stabilises the cut and improves surface integrity The parallelogram 85° insert geometry with a 3 mm corner radius and a 15° clearance angle provides axial stability and a consistent cutting engagement. This design reduces vibration and distributes cutting forces over a larger edge segment, helping to achieve a better surface finish and longer edge life in both roughing and semi-finishing operations. The F56 chipbreaker is engineered to produce fragmented, manageable chips when cutting steel and cast iron, enhancing machine safety and improving swarf evacuation without sacrificing material removal rates. Predictable performance for series production and flexible tool setup With a stable cutting edge and consistent chip control, this insert supports repeatable results across batches and setups; tool scheduling becomes simpler and toolholder changes are less disruptive. The insert’s tolerance class M and robust grade reduce the need for frequent offset corrections, while the coated substrate handles typical heat and abrasion encountered in medium-duty milling. For manufacturing environments where process security and uniform part quality are priorities, this insert contributes to steady throughput and lower overall tooling expenditure. Speak with Metav Werkzeuge for tailored machining parameters, sample trials or to secure genuine Walter Tools Tiger·tec Silver inserts; technical consultation and order support are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: ADMT160630R-F56-WKP35S-WALTER Designation: ADMT160630R-F56 WKP35S Manufacturer: Walter Tools Numbers / Core Technical Data Clearance angle: 15° Corner radius: 3 Plate size: 16 Plate thickness: 06 Tolerance class: M Designs / Special Features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Shape: Parallelogram 85° Material suitability: P / K (steel, cast iron) FAQ What materials is this insert intended for? The ADMT160630R-F56 WKP35S insert is designed for ISO group P and K materials, meaning it is suitable for machining steel and cast iron with the Walter Tools Tiger·tec Silver grade. Is the insert coated and what benefit does the coating provide? Yes, the insert features the Tiger·tec Silver coating; this coating improves wear resistance and helps maintain a stable cutting edge during extended milling operations. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this Walter Tools milling insert produces controlled, fragmented chips that aid evacuation and reduce the risk of long, tangled swarf during operations on steel and cast iron. Which insert geometry contributes to surface finish and stability? The parallelogram 85° form combined with a 3 mm corner radius and a 15° clearance angle delivers axial stability and a smoother cutting action, supporting improved surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADMT160630R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WSM35G grade and the optimised F56 chipbreaker for reliable machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application guidance. ADMT160630R-F56 WSM35G milling indexable insert – for stainless steel & superalloys, 15° (Walter Tools) The ADMT160630R-F56 WSM35G is a Tiger‑tec Gold coated milling insert designed for productive machining of rostfreie Stähle and heat‑resistant superalloys, combining stable cutting edges with predictable chip control. Tiger‑tec Gold coated for high edge stability Optimised chipbreaker F56 for secure chip control Parallelogram 85° form for versatile milling Suitable for stainless steel and superalloys Improved process reliability through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WSM35G coated carbide grade offers enhanced thermal resistance and abrasion protection, which supports sustained cutting performance when machining materials that generate heat and tend to build up on the cutting edge. For materials classified under ISO group M and S, this coating‑and‑grade pairing reduces the risk of built‑up edge and contributes to more stable cutting forces, translating into fewer interruptions and more consistent component quality. The result is a measurable improvement in process reliability for demanding production environments. Stable chip control and surface quality from engineered geometry With an optimised F56 chipbreaker and a parallelogram insert form, chip formation is controlled even when working with tough, ductile materials. The insert’s 15° free angle and precise geometry promote predictable chip flow, which lowers the chance of snarled chips and improves surface finish on each pass. A defined corner radius of 3 further balances edge strength with achievable surface integrity, so a single insert geometry supports both robust material removal and acceptable finishing passes when the application requires it. Flexible milling strategies via robust shape and mounting The parallelogram 85° plate form combined with the thickness code 06 provides a rigid mounting and a cutting orientation suitable for a range of milling strategies, from shoulder milling to light slotting depending on cutter design. This geometry aids in directional stability and allows toolpaths to be adapted without changing insert family, reducing tool inventory complexity. The insert size 16 and its standardised fixing mean simple integration into existing cutter bodies while maintaining repeatable positioning for consistent results. Productivity gains and reduced downtime through consistent performance Built for the machining of rostfreie Stähle and heat‑resistant alloys, the WSM35G grade focuses on edge robustness and predictable wear behaviour. Together with the F56 chipbreaker, it enables longer intervals between index changes and less rework, supporting higher output and lower overheads per finished part. For further technical details or application‑specific cutting data, Metav Werkzeuge provides consultancy and supplementary documentation to ensure the insert is applied in the most efficient manner for the task at hand. For process‑critical milling tasks, choose the Walter Tools Tiger‑tec Gold WSM35G insert and contact Metav Werkzeuge for tailored advice and ordering assistance. Technical data Article number: ADMT160630R-F56-WSM35G-WALTER Name: ADMT160630R-F56 WSM35G Manufacturer: Walter Tools Numbers Free angle: 15° Corner radius: 3 Plate size: 16 Plate thickness code: 06 Plate form angle: 85° Special features Coating: Tiger‑tec Gold Grade: WSM35G Chipbreaker: F56 Series: Tiger‑tec Gold Tolerance class: M Material suitability: S / M FAQ Is this insert suitable for stainless steels? Yes. The ADMT160630R-F56 WSM35G insert uses the WSM35G grade and Tiger‑tec Gold coating, making it suitable for machining rostfreie Stähle (ISO group M) with improved edge stability. Can the insert be used on heat‑resistant superalloys and titanium? The coated carbide grade and chipbreaker design support applications in the ISO S group, which includes heat‑resistant superalloys and titanium alloys, offering better thermal resistance and edge life. What does the F56 chipbreaker do? The F56 chipbreaker is engineered to control chip formation and evacuation during milling, reducing the risk of built‑up edge and improving surface consistency across passes. How does the parallelogram 85° form benefit milling operations? Parallelogram 85° geometry provides a stable cutting orientation and versatile engagement angles, enabling adaptable milling strategies while maintaining repeatable insert clamping and positioning. How to identify the correct insert when ordering? Refer to the SKU ADMT160630R-F56-WSM35G-WALTER or the ISO designation ADMT160630R-F56 WSM35G to ensure the exact grade, chipbreaker and form are supplied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
ADMT160630R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the robust WSP45G grade combined with a Parallelogram 85° geometry and an R3 corner radius for stable chip formation and predictable tool life; order the ADMT160630R-F56 WSP45G directly via Metav Werkzeuge or contact our consultants for tailored application advice. ADMT160630R-F56 WSP45G milling indexable insert by Walter Tools — Tiger‑tec Gold PVD, Parallelogram 85°, R3 The ADMT160630R-F56 WSP45G is a PVD‑coated milling indexable insert designed for productive milling of steel, stainless steel and heat‑resistant superalloys and titanium. Tiger‑tec Gold PVD coating for enhanced wear resistance Designed for steel, stainless and superalloys (P/M/S) Parallelogram 85° geometry, 15° relief angle Radius R3 with F56 chipbreaker for stable chip control Deliver predictable tool life and higher throughput The combination of Tiger‑tec Gold coating and the WSP45G cutting grade gives a balance between toughness and wear resistance that is tailored for milling. The PVD coating reduces flank wear under the thermal loads typical in machining steel, stainless steel and superalloys, while the grade composition supports consistent edge condition over multiple indexings. This results in fewer interruptions for insert changes and more stable cycle times — an advantage in batch production and CNC cell environments. Measurable parameters such as the insert size 16 and plate thickness 06 provide a compact cutting edge suited to many standard milling cutters. Geometry that secures consistent surface finish and chip control The Parallelogram 85° form and a 15° relief angle create a favourable cutting approach that reduces radial cutting forces and promotes a clean shearing action. The corner radius R3 delivers a compromise between edge strength and surface finish, while the F56 chipbreaker is engineered to control and segment chips for interrupted cuts and difficult‑to‑machine alloys. The tolerance class M ensures repeatable insert dimensions for close toolholder fitment, contributing to consistent part geometry and surface quality across production runs. For those unfamiliar with chipbreakers: they form and curl the chip so evacuation is predictable, lowering the risk of recutting and improving tool life. Integration into production and recommended applications This insert is intended for versatile milling operations where a reliable, general‑purpose grade is required. The hardwearing PVD surface and robust substrate make it suitable for roughing as well as semi‑finishing passes in demanding materials, particularly when machining components that require steady material removal rates and controlled heat at the cutting edge. The insert’s execution T and geometry favour machines and toolholders that can maintain positional stability; pairing with a suitably rigid cutter and optimised feeds will maximise the benefit of the Tiger‑tec Gold technology. For process planning, consider the combination of chipbreaker F56 and corner radius R3 when selecting feeds to balance surface finish and cycle time. Contact Metav Werkzeuge for application support and to secure the ADMT160630R-F56 WSP45G insert for production use; technical consultants are available to advise on cutter integration and cutting data Technical Data Article number: ADMT160630R-F56-WSP45G-WALTER Item: ADMT160630R-F56 WSP45G Manufacturer: Walter Tools Facts Insert size: 16 Plate thickness: 06 Corner radius: 3 Relief angle: 15° Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Grade: WSP45G (coated carbide) Chipbreaker: F56 Shape: Parallelogram 85° Applicable materials: steel, stainless steel, superalloys, titanium Execution: T FAQ What materials is this insert suitable for? The ADMT160630R-F56 WSP45G insert is specified for P/M/S groups, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys including titanium. What role does the F56 chipbreaker play? The F56 chipbreaker on this Walter Tools milling insert controls chip formation and evacuation to reduce recutting and support steady machining in interrupted or continuous milling. How does the Parallelogram 85° geometry benefit machining? Parallelogram 85° geometry reduces radial cutting forces and supports a positive cutting action, which helps achieve consistent surface quality and longer tool life in many milling applications. What does the tolerance class M indicate? Tolerance class M indicates medium tolerance for dimensional repeatability, ensuring reliable seating in standard toolholders and consistent performance across multiple indexings. Which cutter types pair well with this insert? Rigid milling cutters with secure clamping and minimal run‑out are recommended for best results with the ADMT160630R-F56 WSP45G insert, especially when machining tougher alloys. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer Walter Tools.
ADMT160632R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, the WKP35G carbide grade and the controlled F56 chipbreaker for consistent productivity in steel and cast iron machining; order directly via Metav Werkzeuge or consult our application specialists for process-optimised tool selection. Fräswendeschneidplatte ADMT160632R-F56 WKP35G – Tiger·tec Gold coated milling insert for steel and cast iron by Walter Tools The ADMT160632R-F56 WKP35G is a precision milling insert engineered for high-productivity finishing and interrupted cuts in steel and cast iron applications Tiger·tec Gold coating for long tool life Grade WKP35G for P and K materials 15° clearance angle for stable cutting Parallelogram 85° shape for secure seating Boosted productivity through a proven carbide grade The WKP35G grade, integrated in the Tiger·tec Gold family, offers a balanced combination of wear resistance and toughness tailored for machining steel and cast iron. As a coated carbide solution, the insert promotes predictable chip formation and extended cutting intervals, reducing the frequency of tool changes and machine downtime. The built-in F56 chipbreaker is designed to control chip flow under typical steel and cast iron cutting conditions, which in turn supports a stable process and consistent surface quality. Stable geometry for reliable cutting performance The insert's parallelogram form with an 85° seat and a 15° clearance angle delivers a stiff, low-vibration cutting geometry that improves tool life and repeatability. The 3.2 mm corner radius increases edge strength for interrupted cuts while the specified plate size and thickness ensure correct seating in compatible toolholders. Tolerance class M guarantees dimensional consistency, so the component is suitable for series production where predictable positioning and repeatable results are essential. Practical benefits: efficiency, service life and handling As an indexable milling solution the insert simplifies maintenance cycles: worn cutting edges are replaced quickly without regrinding complete tools, enabling cost-effective tool management. The coated carbide construction supports higher cutting speeds and stable wear behaviour, which increases throughput and lowers unit cost in many machining scenarios. For application-specific recommendations or data sheets, Metav Werkzeuge provides technical support to match the insert to the chosen cutter body and machining strategy. Contact Metav Werkzeuge for tailored application advice or to reserve this Walter Tools ADMT160632R-F56 WKP35G insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data SKU: ADMT160632R-F56-WKP35G-WALTER Designation: ADMT160632R-F56 ISO designation: ADMT160632R-F56 WKP35G Series: Tiger-tec Gold Grade: WKP35G Manufacturer: Walter Tools Core specifications Size: 16 Thickness: 06 Clearance angle: 15° Corner radius: 3.2 mm Shape: Parallelogram 85° Tolerance class: M Materials & features Material designation: P / K Suitable for: steel, cast iron Chipbreaker: F56 Coating technology: Tiger·tec Gold Execution: T FAQ Which materials is this insert suitable for? The ADMT160632R-F56 WKP35G insert is specified for steel (P) and cast iron (K) machining and is optimised by the Tiger·tec Gold coating for these material groups. What does the F56 chipbreaker achieve? The F56 chipbreaker on this Walter Tools milling insert controls chip shape and evacuation, supporting safe, predictable chip flow when machining steels and cast irons. Can this insert be used for stainless steel? Stainless steel is not listed among the certified material groups for the WKP35G grade; the insert is designed primarily for P and K workpieces. How does the 3.2 mm corner radius affect performance? A 3.2 mm corner radius increases edge robustness, which improves resistance to chipping during interrupted cuts and helps maintain surface quality on demanding finishes. Is the Tiger·tec Gold coating beneficial for higher cutting speeds? Yes, the Tiger·tec Gold coating improves wear resistance and thermal stability, enabling more aggressive cutting parameters and longer edge life in many steel and cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADMT160632R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating performance, precise parallelogram 85° geometry and efficient chip control for steady production. Order the ADMT160632R-F56 WKP35S indexable milling insert via Metav Werkzeuge or request advice from Metav Werkzeuge consultants. ADMT160632R-F56 WKP35S indexable milling insert by Walter Tools for steel and cast iron, Tiger‑tec Silver coated The ADMT160632R-F56 WKP35S is an indexable milling insert designed for medium- to high‑productivity machining of steel and cast iron, combining a robust grade with geometry optimised for chip formation and edge stability. Tiger‑tec Silver coating for high wear resistance WKP35S grade for broad material coverage Parallelogram 85° shape for strong cutting edge 15° clearance with 3.2 mm corner radius Proven coating technology for extended tool life The insert uses the Tiger‑tec Silver concept and the WKP35S coated carbide grade, engineered to reduce flank and crater wear under cyclic cutting conditions. This coating system improves thermal resistance and helps maintain a stable cutting edge, which lengthens service intervals and reduces unplanned tool changes. The result is a measurable increase in uptime and predictable tool performance in series production. Geometry and chip control that enhance process stability A parallelogram 85° shape combined with the F56 chipbreaker provides controlled chip flow and consistent surface finish. The 15° clearance angle lowers rubbing and heat build‑up at the flank, while the 3.2 mm corner radius supports robust feed rates and helps avoid premature edge chipping. These geometrical choices lead to smoother cutting, less vibration and reliable repeatability on successive parts. Optimised for steel (P) and cast iron (K) applications Designed for ISO material groups P (steel) and K (cast iron), this insert handles the typical heat development and chip forms of unalloyed and alloyed steels as well as the abrasive nature and short, breaking chips of cast materials. That makes it suitable for workshops and production lines aiming for consistent component tolerances and efficient material removal across mixed batches. Production-friendly sizing and consistent performance With a nominal size of 16 and a compact thickness designation, the insert integrates into standard toolholder systems for indexable milling. The robust grade and geometry contribute to predictable tool life and reduced changeover frequency, supporting continuous machining strategies and improved cost‑effectiveness per part. Backed by Walter Tools know‑how, the insert helps maintain process consistency in high‑demand environments. For reliable high‑volume machining with Walter Tools' Tiger‑tec Silver grade, contact Metav Werkzeuge for tailored technical advice and prompt supply from stock. Technical data Article number: ADMT160632R-F56-WKP35S-WALTER Designation: ADMT160632R-F56 WKP35S Manufacturer: Walter Tools SKU: ADMT160632R-F56-WKP35S-WALTER Core specifications Grade / series: WKP35S / Tiger‑tec Silver Geometry: Parallelogram 85° Clearance angle: 15° Corner radius: 3.2 mm Chipbreaker: F56 Size: 16 Thickness designation: 06 Tolerance class: M Materials & special features Suitable for: steel (P) Suitable for: cast iron (K) Coated carbide grade for improved wear resistance Robust chip control for short and broken chips Stable cutting edge for productive machining FAQ What materials is this insert suitable for? The ADMT160632R-F56 WKP35S insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron with effective chip control and wear resistance. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP35S grade increases thermal resistance and reduces flank and crater wear, which helps maintain the cutting edge and extend service life under continuous machining. What is the benefit of the parallelogram 85° geometry? The parallelogram 85° shape strengthens the cutting edge and supports low‑vibration cutting, contributing to consistent surface finish and enhanced edge stability during milling. Why is the 3.2 mm corner radius important? A 3.2 mm corner radius provides edge reinforcement for higher feed rates and reduces the risk of chipping, which supports longer tool life and reliable dimensional results. What role does the F56 chipbreaker play? The F56 chipbreaker is engineered to produce controlled, short chips for cast iron and segmented chips for steel, improving evacuation and reducing the chance of entangling chips at the cutter. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and operates under the trade name Walter Tools as part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Mention of brands and trademarks is for explanatory purposes only and does not imply any affiliation with Metav Werkzeuge.
ADMT160632R-F56 WSM35G T Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold grade and a 15° relief angle for secure chip formation and longer edge life; the robust 3.2 mm corner radius supports heavy cutting and reliable performance. Order the ADMT160632R-F56 WSM35G insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160632R-F56 WSM35G – Milling indexable insert for stainless steels and superalloys (Walter Tools) A high-performance milling insert, ADMT160632R-F56 WSM35G, designed for productive roughing and semi-finishing of stainless steels and heat‑resistant alloys. Tiger‑tec Gold coated grade WSM35G 15° relief for stable cutting 3.2 mm corner radius for robust edge Parallelogram 85° form for flexible milling Secure chip control and longer tool life for demanding materials The combination of the WSM35G grade and the Tiger‑tec Gold coating stabilises the cutting edge under thermal stress, which results in consistent chip control and reduced edge build‑up when machining tough materials. The insert’s design supports a repeatable cutting process that increases the intervals between tool changes and lowers overall production interruptions. As a consequence, cycle times are kept predictable and machining quality remains constant even under challenging conditions. Geometry optimised for heavy cutting and edge strength A parallelogram 85° insert form paired with a 3.2 mm corner radius provides a balance between cutting robustness and accessibility in pocketed geometries. The positive engagement from the insert geometry reduces cutting forces at the start of engagement, while the generous corner radius disperses load over a larger area to protect the edge during interrupted cuts. This means improved resistance to chipping and steady performance in demanding milling operations. Proven suitability for stainless steels and superalloys Marked for the ISO material groups M and S, this grade is tailored for stainless steels and heat‑resistant superalloys or titanium applications. Materials in these groups typically generate high temperatures at the cutting zone and tend to form long or adhesive chips; the WSM35G composition and its coating technology are optimised to support secure chip formation and maintain a stable cutting edge under such conditions. For shops processing corrosion‑resistant or high‑temperature alloys, the insert delivers consistent surface results and repeatable machining cycles. Practical advantages for shopfloor productivity The integrated F56 chipbreaker and the insert’s thickness code provide a predictable chip shape and evacuation pattern suitable for continuous milling passes, which reduces the need for manual chip management and cleaning. The insert’s construction supports straightforward indexation and handling, simplifying tool inventory and changeover. Combined with Walter Tools’ manufacturing standards, these attributes help to increase operational uptime and contribute to a more economical machining workflow. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts to secure optimal tool life and process reliability with the ADMT160632R-F56 WSM35G Technical Data SKU: ADMT160632R-F56-WSM35G-WALTER Designation: ADMT160632R-F56 WSM35G Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 3.2 mm Insert size: 16 Thickness code: 06 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSM35G Chipbreaker: F56 Form: Parallelogram 85° Execution: T Material suitability: S / M (superalloys/titanium and stainless steels) FAQ What materials is this insert suitable for? The ADMT160632R-F56 WSM35G milling insert (Walter Tools) is specified for ISO groups M and S, making it suitable for stainless steels and heat‑resistant superalloys or titanium. How does the Tiger‑tec Gold grade affect performance? The Tiger‑tec Gold coating on the WSM35G grade enhances thermal resistance and wear behaviour, which helps maintain edge stability and consistent chip control in demanding machining of tough materials. What advantage does the parallelogram 85° form offer? The parallelogram 85° geometry provides flexible engagement angles for various milling tasks and supports stable cutting forces, while the 3.2 mm corner radius increases edge strength during heavy or interrupted cuts. Is the F56 chipbreaker suitable for continuous milling? Yes, the F56 chipbreaker is designed to produce short, manageable chips in many continuous milling operations, improving evacuation and reducing the risk of entanglement. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Registered trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com