ADMT160632R-F56 WSP45G T Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance, stable chip control and versatile material capability for reliable milling cycles; the Tiger‑tec Gold grade ensures long tool life while the parallelogram geometry and 15° clearance support consistent surface quality. Order directly via Metav Werkzeuge or consult the team for application-specific advice. ADMT160632R-F56 WSP45G indexable milling insert – Tiger‑tec Gold, 15° clearance (Walter Tools) The ADMT160632R-F56 WSP45G is an indexable milling insert engineered for versatile face and shoulder milling, combining a PVD‑coated carbide grade with an F56 chipbreaker for secure chip control in demanding applications. Tiger‑tec Gold PVD coating for increased wear resistance Versatile grade WSP45G for steel, stainless and superalloys Parallelogram 85° shape with 3.2 mm corner radius 15° clearance angle for stable cutting performance Faster throughput through engineered coating and grade The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers measurable productivity advantages in milling operations. The PVD multilayer coating increases wear resistance, which reduces insert changes and machine downtime; the optimised substrate and coating adhesion maintain a sharp cutting edge under fluctuating thermal loads. For production environments that prioritise consistent cycle times, this insert offers a favourable cost‑per‑part balance by extending service intervals and supporting higher average cutting distances between index changes. Geometry that improves process stability and surface finish The parallelogram 85° form and 3.2 mm corner radius are designed to balance strength and finishing capability. The geometry reduces radial engagement spikes and distributes cutting forces across a larger edge length, resulting in more stable cutting behaviour and improved component surface quality. The integrated F56 chipbreaker facilitates controlled chip segmentation, lowering the risk of built‑up edge and enabling reliable evacuation in both up‑ and down‑milling directions—particularly beneficial for multi‑pass finishing where repeatable outcomes are required. Broad material capability for diverse production needs Approved for ISO groups P, M and S, this insert is suited to machining a wide range of materials including carbon and alloyed steel, stainless steel and high‑temperature superalloys or titanium. The grade’s toughness and thermal resistance help prevent premature chipping when cutting ductile or heat‑generating workpieces, while the coating supports elevated speeds where appropriate. For mixed‑batch shops or fixtures that must handle varying alloys, the insert reduces tooling variety without compromising reliability. Practical advantages for workshop decision‑makers Beyond technical attributes, this insert contributes to smoother operations through repeatable performance and simplified tool management. The standard designation and cartridge compatibility ease replenishment; the robust edge preparation assists in predictable tool life estimation. For production planners, the combined benefits translate into fewer unscheduled stops and more consistent part quality, reinforcing process capability and lowering overall machining cost when integrated into a programmed tooling strategy. Contact Metav Werkzeuge for tailored application recommendations and to secure Walter Tools ADMT160632R-F56 WSP45G inserts for immediate delivery Technical data Article number: ADMT160632R-F56-WSP45G-WALTER Product designation: ADMT160632R-F56 WSP45G Manufacturer: Walter Tools Product type: Indexable milling insert Core specifications Clearance angle: 15° Corner radius: 3.2 mm Insert size: 16 Plate thickness: 06 Tolerance class: M Insert form: Parallelogram 85° Materials & features Grade: WSP45G Series: Tiger‑tec Gold Chipbreaker: F56 Coating: PVD coated carbide Applicable material groups: P (steel), M (stainless steel), S (superalloys/titanium) Designation without grade: ADMT160632R-F56 Execution: T FAQ What materials can this insert machine effectively? The ADMT160632R-F56 WSP45G insert is suitable for ISO groups P, M and S, meaning it machines steel, stainless steel and heat‑resistant superalloys including titanium with reliable chip control. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold enhances the insert’s wear resistance and thermal stability; in the ADMT160632R-F56 WSP45G this results in longer edge life and more consistent removal rates under elevated temperatures. Which geometry features support better surface finish? The parallelogram 85° shape combined with a 3.2 mm corner radius provides distributed cutting forces and the F56 chipbreaker secures controlled chip formation, together improving surface quality during finishing passes. Is this insert suitable for high‑speed milling? The PVD‑coated carbide and the WSP45G grade are designed to tolerate elevated cutting speeds where process parameters and machine setup permit, offering a balance between speed and edge stability. Can the ADMT160632R-F56 be used for both roughing and finishing? Yes; the insert’s toughness and chip control enable productive roughing, while the edge geometry and radius support fine finishing operations when adjusted for appropriate feeds and depths. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, factory‑new product from Walter Tools.
ADMT160640L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and WKP35G carbide grade for prolonged tool life and reliable chip control in steel and cast iron machining; order directly via Metav Werkzeuge or request advice from our technical consultants. ADMT160640L-F56 WKP35G milling indexable insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) A ADMT160640L-F56 WKP35G milling insert engineered for stable face milling with a Tiger·tec Gold coated carbide grade, optimised for machining steel (P) and cast iron (K) Tiger·tec Gold coated carbide grade WKP35G For steel (P) and cast iron (K) applications Parallelogram 85° shape for secure clamping 15° relief and 4 mm corner radius Boosted tool life and process reliability through coating technology The combination of Tiger·tec Gold coating and the WKP35G carbide substrate delivers clear process advantages: improved wear resistance and consistent cutting-edge stability. These properties reduce downtimes and tooling change frequency, which translates into higher productive run times per tool set. For medium-duty face and shoulder milling, the coated grade supports stable chip formation under the typical thermal and mechanical loads encountered when machining steel and cast iron, enabling predictable tool performance across batch production. Geometry that secures repeatable machining results With a parallelogram 85° plate form, 15° relief and a 4 mm corner radius, the insert ensures secure clamping and favourable cutting engagement for a wide range of operations. The geometric setup contributes to even load distribution and minimises vibration, which improves surface finish and dimensional stability. The insert size 16 and plate thickness 06 are matched to common milling toolholders, offering a compact cutting edge that preserves rigidity while permitting effective chip evacuation when paired with the correct cutter body. Controlled chip flow for efficient machining The integrated F56 chipbreaker is designed to shape and control chips during operations on P- and K-class materials, reducing the risk of entanglement and promoting smooth evacuation. Controlled chip form lowers the likelihood of workpiece or tool damage and supports uninterrupted cycle times. When combined with the coated grade's abrasion resistance, the chip control features contribute to consistent machining quality and reduced secondary operations such as rework or manual cleaning. Application fit and production advantages This indexable plate is particularly suitable for industrial milling tasks where a balance of tool life and process security is required. The coating and grade selection favour users aiming to achieve longer tool lifespans and fewer tool changes, supporting cost-efficiency across production runs. For engineers seeking a reliable insert solution for mixed-series machining of steel and cast iron, the combination of robust coating, stable geometry and effective chip control offers measurable benefits in throughput and part quality. If specific cutting data or holder compatibility is needed, technical consultation is recommended. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools Tiger·tec Gold inserts such as the ADMT160640L-F56 WKP35G Technical data Article number: ADMT160640L-F56-WKP35G-WALTER Designation: ADMT160640L-F56 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Insert size: 16 Plate thickness: 06 Relief angle: 15° Corner radius: 4 Chipbreaker: F56 Tolerance class: M Special features Coating / grade: Tiger·tec Gold, WKP35G Plate form: Parallelogram 85° Substrate / class: Coated carbide Material suitability: Steel (P) Material suitability: Cast iron (K) FAQ What materials are appropriate for this insert? The ADMT160640L-F56 WKP35G is suitable for machining steel (P) and cast iron (K) according to the grade characteristics and Tiger·tec Gold coating. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and cutting-edge stability, extending tool life during continuous milling of steels and cast irons. How does the parallelogram 85° form affect performance? The parallelogram 85° geometry offers secure clamping and stable cutting engagement, improving surface finish and repeatability in face milling applications. Which chipbreaker should be used for interrupted cuts or heavy cross-sections? The integrated F56 chipbreaker is designed for controlled chip formation on P and K materials and helps reduce chip-related issues during demanding cuts. Is this insert compatible with common cutter bodies? With an insert size 16 and plate thickness 06, the ADMT160640L-F56 WKP35G fits standard milling toolholders specified for this insert family; consult cutter supplier data for exact holder compatibility. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; part of the Walter Tools portfolio. The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanation only and indicate no affiliation between our company and the brand owners. The offered article is original and factory-new.
ADMT160640L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WSP45G grade and secure chip control for consistent milling results; order directly via Metav Werkzeuge or consult the team for application-specific guidance. ADMT160640L-F56 WSP45G — Indexable milling insert, Tiger·tec Gold, for Stahl, rostfreier Stahl and heat-resistant alloys — Walter Tools ADMT160640L-F56 WSP45G is an indexable milling insert designed for general and demanding milling tasks in a wide range of materials, offering a balance of edge stability and reliable chip control Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° for positive cutting 15° relief and 4 mm corner radius Consistent performance for high-demand milling The WSP45G grade within the Tiger·tec Gold family provides a PVD-coated cemented carbide solution developed for versatility and durability. Its composition supports stable cutting edges under the heat and mechanical load typical for Stahl and rostfreier Stahl, reducing the risk of edge build-up and enabling more predictable tool life. The result is fewer interruption cycles and a smoother production flow, which helps maintain machining quality across mixed batches. Secure chip formation and improved process reliability The insert’s chipbreaker F56 geometry and parallelogram 85° form produce controlled chips and a positive cutting action that reduces vibration and enhances surface finish. With a 15° relief angle and a 4 mm corner radius, the geometry supports robust edge strength during shoulder milling and slotting operations. These design elements translate into tangible process security: stable cutting forces, lower tendency for built-up edge and longer intervals between indexings. Versatility across materials and applications Engineered for use with the material groups P, M and S, the grade is suited to a wide material mix including Stahl, rostfreier Stahl and heat-resistant superalloys (and titanium where applicable). This breadth means fewer insert changes and simplified tooling management for shops that machine mixed components. The combination of coating technology and substrate hardness enables effective machining at moderate to elevated cutting speeds with reliable wear resistance. Practical benefits for workshop productivity Adopting this indexable insert supports a rational cost-benefit balance: effective edge life reduces tooling consumption while the insert’s geometry contributes to shorter cycle times through consistent surface quality and minimal rework. For production environments seeking repeatability, the insert’s established grade and robust geometry help maintain part tolerances and reduce process variability, supporting both small-batch flexibility and serial production demands. Contact Metav Werkzeuge for tailored recommendations on tooling sets, cutting parameters and availability of ADMT160640L-F56 WSP45G — Metav Werkzeuge can advise on feed and speed combinations for specific materials and machining strategies Technical data SKU: ADMT160640L-F56-WSP45G-WALTER Article designation: ADMT160640L-F56 WSP45G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 4 mm Insert size: 16 mm Thickness code: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated cemented carbide) Chipbreaker: F56 Shape: Parallelogram 85° Suitable for: Stahl, rostfreier Stahl, heat-resistant superalloys and titanium Execution: T FAQ What materials is this insert suitable for? The ADMT160640L-F56 WSP45G insert from Walter Tools is designed for machining Stahl, rostfreier Stahl and heat-resistant superalloys (including titanium applications where appropriate), thanks to the Tiger·tec Gold grade tailored for those material behaviours. How does the chipbreaker F56 help in milling operations? The F56 chipbreaker on this indexable insert promotes controlled chip formation, reducing vibration and improving surface quality; in the ADMT160640L-F56 WSP45G it supports stable cutting especially in shoulder and slot milling. Can this insert be used for finish machining? Yes — the combination of the Tiger·tec Gold coating and the insert geometry offers a good balance between wear resistance and edge integrity, allowing the insert to deliver consistent surface finish in typical finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160640R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP35G grade for sustained tool life and stable chip formation in milling of steel and cast iron; order through Metav Werkzeuge or consult the team for application-specific recommendations. ADMT160640R-F56 WKP35G milling insert — Tiger‑tec Gold, chipbreaker F56 (Walter Tools) The ADMT160640R-F56 WKP35G is a coated carbide indexable milling insert engineered for high‑productivity finishing and medium‑to‑roughing applications in steel and cast iron. Tiger‑tec Gold coating for long tool life Optimised F56 chipbreaker for controlled chips Parallelogram 85° geometry for axial versatility 15° clearance angle with 4 mm corner radius Increased productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G cutting grade delivers a measurable improvement in tool life and process stability. The multilayer coating system reduces flank wear under typical steels machining conditions, which translates into longer tool cycles and fewer index changes. This reduces downtime and contributes to a lower cost per component. For process engineers, the coated substrate means a wider window for cutting speeds and feeds while maintaining dimensional repeatability and part quality. Controlled chip formation for reliable machining results The integrated chipbreaker F56 is designed to promote predictable chip formation when machining steel and cast iron, reducing the risk of chip entanglement and tool damage. By shaping the metal flow, the chipbreaker helps maintain a consistent cutting zone temperature and improves heat dissipation. The result is a more constant surface quality and fewer interrupted cuts, which supports stable cycle times and reduces rework. For manufacturers focusing on batch consistency, this feature directly supports higher first‑pass yield. Geometry that adds flexibility to milling strategies The parallelogram 85° insert geometry, combined with a 15° clearance and a 4 mm corner radius, offers a versatile balance between strength and accessibility. The shape enables varied approach angles and axial depths, allowing the same insert to be used across different pocketing and profiling tasks. The moderate corner radius improves corner strength for interrupted cuts while preserving edge definition for acceptable surface finish. These geometric choices enable programmers and machinists to simplify tooling families without sacrificing performance. Application guidance and practical benefits for production Selection is straightforward since the insert is aimed at standard P (steel) and K (cast iron) ISO groups; the coated carbide construction supports a broad range of steel grades commonly used in industrial production. The ADMT160640R‑F56 WKP35G milling insert from Walter Tools is therefore suited for operations seeking a combination of productivity and predictable tool behaviour. For precise cutting‑data recommendations, Metav Werkzeuge can provide suggested speeds and feeds, along with availability and logistics details; technical consultation is available by e‑mail or phone to support integration into existing machining cycles. Contact Metav Werkzeuge for tailored cutting‑data recommendations and stock information on Walter Tools Tiger‑tec Gold inserts Technical data Article number: ADMT160640R-F56-WKP35G-WALTER Name: ADMT160640R-F56 WKP35G Label: Fräswendeschneidplatte ADMT160640R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Grade: WKP35G Facts Insert size: 16 Thickness: 06 Corner radius: 4 mm Clearance angle: 15° Shape: Parallelogram 85° Tolerance class: M Execution: T Materials & special features Coated carbide substrate (Tiger‑tec Gold) Chipbreaker: F56 Applicable material groups: P (steel), K (cast iron) Stable chip formation and wide material coverage Designed for productive milling and reliable edge life FAQ What materials can this insert machine effectively? The ADMT160640R‑F56 WKP35G is designed primarily for ISO groups P and K, meaning it is suitable for machining steel and cast iron with the Tiger‑tec Gold coated carbide providing abrasion resistance and thermal stability. How does the F56 chipbreaker affect machining? The chipbreaker F56 shapes and controls chip flow to reduce entanglement and improve heat management, which leads to more consistent cuts and fewer interruptions in the machining process. Which features reduce the need for frequent index changes? The combination of the Tiger‑tec Gold coating and the WKP35G grade increases wear resistance and process stability, extending the service intervals between index changes and lowering overall tooling costs. Is the insert geometry suitable for profiling and shoulder milling? Yes, the parallelogram 85° geometry with 15° clearance and a 4 mm corner radius offers a compromise between edge strength and access, making it appropriate for profiling, shoulder milling and operations with occasional interruptions. Can the insert be used for hardened steels? The insert is specified for P (steel) and K (cast iron) applications in the provided data; the suitability for hardened steels is not indicated and should be verified against specific material hardness and process requirements. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
ADMT160640R-F56 WKP35S T Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP35S grade for consistently high productivity on steel and cast iron; the 15° free angle and 4 mm corner radius deliver secure chip control and reliable edge life. Order the ADMT160640R-F56 WKP35S directly via Metav Werkzeuge or consult their advisors for application-specific data. ADMT160640R-F56 WKP35S milling insert by Walter Tools — Tiger‑tec Silver for steel and cast iron The ADMT160640R-F56 WKP35S is a parallelogram milling insert engineered for productive machining of P (steel) and K (cast iron) components Tiger‑tec Silver coating for long tool life Optimised for steel and cast iron machining Parallelogram 85° form for secure clamping 15° free angle and 4 mm corner radius for stable chips Enhanced process stability through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S coated‑carbide grade provides a measurable benefit in wear resistance and process stability. Designed in accordance with ISO 513 groupings, the insert is tailored for machining tasks in the P and K material classes — that is, unalloyed or alloyed steel and cast iron. The coating reduces abrasive and adhesive wear, which supports longer uninterrupted tool life and fewer insert changes during production runs, improving overall machining throughput. Geometry optimised for secure clamping and consistent surface quality The parallelogram 85° form combined with a 15° free angle yields a geometry that favours positive cutting engagement and reliable seat stability in the cutter body. The 4 mm corner radius reduces peak loads on the cutting edge and contributes to smoother chip formation, which in turn supports consistent surface finish and reduced vibration. Nominal dimensions such as plate size 16 and thickness 06, together with tolerance class M, make the insert suitable for standardised toolholders that demand repeatable positioning and predictable performance. Practical benefits for workshop and production environments As a member of the Tiger‑tec Silver series, this insert is intended to deliver repeatable results across catalogued geometries where steel and cast iron constitute the primary workpiece materials. The integrated F56 chipbreaker supports controlled chip formation under typical turning and milling forces encountered in component manufacturing. For production planners and process engineers, the net effect is improved machining reliability and easier process assignment when consolidating tool lists or specifying inserts for mixed‑material batches. Contact Metav Werkzeuge for tailored cutting data and to arrange procurement of Walter Tools ADMT160640R-F56 WKP35S inserts Technical data Article number: ADMT160640R-F56-WKP35S-WALTER Name: ADMT160640R-F56 WKP35S Brand: Walter Tools Series: Tiger‑tec Silver Core specifications Size: 16 Thickness: 06 Corner radius: 4 mm Free angle: 15° Form: Parallelogram 85° Tolerance class: M Chipbreaker: F56 Materials & features Grade: WKP35S Substrate/coating: coated carbide, Tiger‑tec Silver Suitable for: steel (P), cast iron (K) Execution: T Series: Tiger‑tec Silver FAQ Which materials is this insert suitable for? The ADMT160640R-F56 WKP35S milling insert from Walter Tools is designed for machining steel (P) and cast iron (K) in accordance with ISO 513 material groupings. What does the F56 chipbreaker do? The F56 chipbreaker on the ADMT160640R-F56 WKP35S supports controlled chip formation and facilitates stable evacuation when cutting steel and cast iron. How do the insert geometry features improve performance? The parallelogram 85° form, 15° free angle and 4 mm corner radius combine to provide secure clamping, reduced edge loading and consistent chip control for reliable surface quality. Which series and coating does this grade belong to? This insert is part of the Tiger‑tec Silver series; the WKP35S grade is a coated‑carbide formulation engineered for wear resistance and broad material coverage. What is the intended production use for this insert? The ADMT160640R-F56 WKP35S is intended for productive milling operations where steel and cast iron are the primary workpiece materials and repeatable tool life is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160640R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WSM35G grade for reliable machining of stainless steels and heat‑resistant alloys; trust in secure chip control and a stable cutting edge to raise productivity. Order the insert directly via Metav Werkzeuge or consult our specialists for machining data and application advice. ADMT160640R-F56 WSM35G Fräswendeschneidplatte – Parallelogram 85°, Tiger‑tec Gold (Walter Tools) A ADMT160640R-F56 WSM35G milling indexable insert engineered for heavy‑duty and demanding milling of stainless steels and heat‑resistant superalloys. Tiger‑tec Gold coating for extended tool life WSM35G grade for stainless steels and superalloys Parallelogram 85° form for secure seating and stability 15° clearance angle with R4 corner radius Reliable performance when machining stainless steels and superalloys The combination of a coated carbide substrate in the Tiger‑tec Gold family and the WSM35G grade addresses the common challenges of machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). These materials tend to be tough, produce built‑up edge and generate high temperatures; the selected grade supports controlled chip formation and a durable cutting edge. For production environments where repeatable surface finish and long tool life reduce downtime, this solution provides a measurable improvement in process stability and component consistency. Coating technology that extends cutting intervals The Tiger‑tec Gold coating applied to this insert improves thermal resistance and protects the cutting edge against abrasion and adhesion. In practice, the coating reduces flank wear and delays crater formation, which translates into longer tool life and fewer indexings. For shops seeking lower tooling costs per part and predictable tool change cycles, the coated grade delivers a favourable cost‑benefit ratio while maintaining machining quality in both roughing and semi‑finishing operations. Geometry and chip control for stable milling cycles The parallelogram 85° insert form combined with the chipbreaker F56 offers a balanced solution for chip evacuation and cutting stability. The geometry yields a robust seat engagement and reduced vibration tendency during interrupted cuts. The 15° clearance angle and corner radius R4 support cutting forces typical of heavy milling while smoothing feed transitions; this results in consistent surface integrity and reduced risk of edge chipping. Where process reliability and repeatable part tolerances are required, the geometry supports both productivity and component safety. Practical application guidance and process benefits Designed for demanding applications, the insert is suited to shop floors performing serial milling of components made from stainless steel and heat‑resistant alloys. The grade’s broad material coverage simplifies toolkeeping strategies and inventory management by reducing the number of dedicated grades required. When implementing the insert into a machining cycle, pairing the correct insert geometry with stable clamping and optimised coolant application will maximise the advantages of the grade and coating. For specific cutting data or trial recommendations, technical consultation is available to align tool selection with machine capability and component tolerances. Contact Metav Werkzeuge for tailored cutting parameters, availability and application advice for the Walter Tools ADMT160640R-F56 WSM35G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT160640R-F56-WSM35G-WALTER Name: Fräswendeschneidplatte ADMT160640R-F56 WSM35G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Chipbreaker: F56 Core technical figures Size: 16 Thickness: 06 Clearance angle: 15° Corner radius: 4 Tolerance class: M Materials & features Coated carbide grade: Tiger‑tec Gold WSM35G Suitable for: stainless steels (M) and superalloys / titanium (S) Insert form: Parallelogramm 85° Geometry execution: T Chip control: F56 FAQ What types of materials is this insert intended for? The ADMT160640R-F56 WSM35G insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys including titanium (ISO group S), offering stability in difficult‑to‑cut materials. How does the Tiger‑tec Gold coating benefit the cutting process? Tiger‑tec Gold reduces thermal and abrasive wear on the coated carbide surface, so the WSM35G grade maintains a sharper edge longer and extends the intervals between indexing or tool changes. Which machining operations are most suitable for this insert? This indexable insert performs well in heavy milling and interrupted cuts where edge stability and chip control are critical; it is suitable for production roughing and semi‑finishing depending on machine and fixture setup. What is the purpose of the parallelogram 85° form? The parallelogram 85° form provides a secure seat and improved cutting stability, helping to reduce vibration and maintain consistent contact during demanding milling cycles. How does the chipbreaker F56 affect chip formation? The F56 chipbreaker is tuned to deliver controlled chip segmentation and evacuation in tougher materials, improving process reliability and reducing the risk of recutting or chip entanglement. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarked names and product designations are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of Walter Tools.
ADMT160640R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated Tiger·tec Gold grade that combines toughness and thermal resistance with a 15° clearance angle and a compact corner radius of 4, delivering stable chip control and extended edge life for milling operations in steel, stainless steel and heat-resistant alloys; order the inserts directly via Metav Werkzeuge or consult the Metav team for application advice. ADMT160640R-F56 WSP45G milling indexable insert — Tiger·tec Gold, versatile for steel, stainless steel and superalloys | Walter Tools The ADMT160640R-F56 WSP45G is a parallelogram 85° milling insert engineered for robust face and shoulder milling where secure chip formation and repeatable tool life are required. PVD-coated Tiger·tec Gold grade WSP45G Suitability for steel, stainless steel and superalloys 15° clearance angle for reliable chip flow Parallelogram 85° shape with corner radius 4 Consistent cutting performance for productive milling The combination of the Tiger·tec Gold coating and the WSP45G substrate produces a reliably tough, PVD-coated carbide that resists thermal and mechanical loads during milling. This results in stable cutting edges and reduced flank wear when machining challenging materials such as steel and stainless steel. The engineered coating system supports higher cutting speeds and longer tool life, which in practice reduces downtime and increases net output per tool change. The design of the insert prioritises predictable wear progression for easier process planning. Controlled chip formation and secure edge stability A 15° clearance angle and the specified F56 chipbreaker geometry ensure efficient chip breaking and evacuation under varying cutting conditions. The corner radius 4 helps to distribute cutting forces across the edge, lowering the risk of premature chipping while maintaining acceptable surface finish. These engineered details translate into fewer interrupted cuts and more consistent surface quality for pocketing, shoulder milling and ramping operations, supporting both short-cycle production and longer continuous runs. Versatility across demanding materials and machining tasks Designed for the ISO groups P, M and S, this insert is suited to a wide range of components — from unalloyed and alloyed steels to heat-resistant superalloys and titanium components. The robust substrate and coating combination emphasises heat resistance and stable chip control, enabling reliable performance where thermal loads and built-up edge tendency are common. For shops that machine mixed batches or require fast changeovers, the insert offers a balance of durability and application breadth, reducing the need for multiple specialised grades. Practical advantages in set-up and series production The parallelogram 85° form and standardised dimensions simplify clamp and holder selection, while the M tolerance class supports interchangeability across holders that accept the same specification. The insert thickness and geometry support secure clamping to maintain repeatable runout and minimise vibration influences on the cutting edge. For production environments seeking process stability and predictable maintenance intervals, the combination of mechanical design and the WSP45G coating contributes to lower variance in part quality and tool consumption. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to arrange rapid supply for your milling processes Technical Data SKU: ADMT160640R-F56-WSP45G-WALTER Item designation: ADMT160640R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 15° Corner radius: 4 Insert size: 16 Thickness: 06 Shape: Parallelogram 85° Tolerance class: M Grade: WSP45G Special features Coating: Tiger·tec Gold (PVD-coated) Material compatibility: P / M / S Chipbreaker: F56 Execution: T Sort: WSP45G FAQ What materials can be machined with this insert? The ADMT160640R-F56 WSP45G insert is designed for machining steel (P), stainless steel (M) and heat-resistant alloys such as superalloys and titanium (S) thanks to its Tiger·tec Gold PVD coating and robust substrate. How does the F56 chipbreaker affect milling? The F56 chipbreaker promotes predictable chip segmentation and evacuation; combined with the 15° clearance angle it reduces recutting of chips and helps maintain secure edge life when milling interrupted and continuous cuts. Is the parallelogram 85° form suitable for shoulder milling? Yes, the parallelogram 85° shape provides secure engagement for shoulder and face milling operations and is compatible with standard clamping systems that accept this insert geometry. Can the insert withstand high cutting speeds? The Tiger·tec Gold coating supports elevated cutting speeds by offering improved thermal resistance and edge robustness, making the insert appropriate for productivity-oriented milling strategies. What tolerance and repeatability can be expected? With a tolerance class of M and standardised dimensions, the insert provides consistent seating and repeatability across compatible toolholders, supporting series production with reduced setup variance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new merchandise of the manufacturer.
ADMT160650R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating for extended tool life, the WKP35G grade optimised for steel and cast iron, and the robust 85° parallelogram geometry for dependable milling results — order the insert directly via Metav Werkzeuge or consult our technical team for tailored application advice. ADMT160650R-F56 WKP35G milling insert, Tiger·tec Gold, for steel and cast iron — Walter Tools the ADMT160650R-F56 WKP35G is a parallelogram milling insert designed for productive roughing and general-purpose finishing in steel and cast iron applications Tiger·tec Gold coated for wear resistance WKP35G grade for steel and cast iron Parallelogram 85° for stable engagement Longer tool life through advanced coating and grade The application of Tiger·tec Gold coating together with the WKP35G grade provides a measurable improvement in wear resistance and process stability. The coated carbide construction reduces flank wear and protects the cutting edge against abrasive conditions typical when machining cast iron or alloyed steels. This results in fewer insert changes, a lower tooling cost per component and more consistent surface quality during long production runs. For operations with variable cutting parameters the enhanced coating performance means greater tolerance to intermittent heat peaks and improved edge security. Predictable chip formation and productivity for ferrous materials Engineered specifically for ISO groups P (steel) and K (cast iron), the insert’s substrate and chipbreaker combination ensure controlled chip formation in frequent breakage conditions. The designated F56 chipbreaker facilitates reliable evacuation, reducing the risk of recutting and helping to maintain cycle times. In practice, this means fewer interruptions and a steadier machining process, particularly on long turned or milled components where consistent chip control directly affects throughput and tool life. Geometry and angles that support machining efficiency The 85° parallelogram shape with a 15° free angle and a corner radius of 5 mm provides a balance between strength and cutting edge accessibility. The geometry allows deep radial engagement while preserving edge stability, beneficial when switching between heavy roughing and semi-finishing passes. The insert’s form supports secure clamping in compatible cutters and contributes to vibration damping, which in turn improves surface finish and dimensional repeatability on produced parts. Series compatibility and practical application notes Belonging to the Tiger·tec Gold series, this insert integrates into systems where coated carbide grades are preferred for mixed-production environments. The designation matches common ISO-style holders that accept the ADMT160650R-F56 form factor; checks should be made against the specific cutter body to confirm seat and clamp compatibility. The insert is classified to tolerance class M and is supplied in execution T, aligning with industrial expectations for repeatable mounting and interchangeability in standard tool systems. Contact Metav Werkzeuge for personalised cutting data, availability and guidance on integrating Walter Tools Tiger·tec Gold inserts into existing machining processes Technical data SKU: ADMT160650R-F56-WKP35G-WALTER Article designation: ADMT160650R-F56 WKP35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Insert size: 16 Plate thickness: 06 Corner radius: 5 Relief angle: 15° Plate form: Parallelogramm 85° Special features Coating: Tiger·tec Gold Chipbreaker: F56 Material suitability: P / K Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT160650R-F56 WKP35G is designed for machining steel (ISO group P) and cast iron (ISO group K), using the Tiger·tec Gold coated carbide grade for improved wear resistance. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the insert increases abrasion resistance and edge life, delivering more stable tool performance and fewer indexings during long production runs with Walter Tools inserts. What is the significance of the 85° parallelogram form? The parallelogram 85° geometry provides robust engagement and good chip ejection, supporting heavier depth of cut and better vibration control compared with less rigid insert shapes. Which chipbreaker is used and what does it do? This insert features the F56 chipbreaker, which promotes controlled chip formation and evacuation, reducing the chance of recutting and helping to maintain consistent cycle times. Is the insert compatible with standard toolholders? The insert follows the ADMT160650R-F56 form factor; compatibility requires a matching pocket for parallelogram inserts — verify holder seat and clamp system before use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160650R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the WKP35S grade and Tiger·tec Silver technology for sustained wear resistance and stable chip formation; the parallelogram 85° geometry with 15° relief ensures predictable cutting behaviour and reduced tool-change frequency. Order the original Walter Tools insert for reliable production results via Metav Werkzeuge or consult our specialists for geometry and application advice. ADMT160650R-F56 WKP35S milling indexable insert — Tiger·tec Silver grade, for steel and cast iron (Walter Tools) The ADMT160650R-F56 WKP35S is a coated carbide milling indexable insert designed for productive face and shoulder milling of steel and cast iron, combining a wear-resistant coating with a geometry that supports controlled chip formation. *ADMT160650R-F56 WKP35S by Walter Tools *Tiger·tec Silver coating for wear resistance *Parallelogram 85° form, 15° relief *Designed for steel and cast iron machining Consistent productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade delivers enhanced wear resistance and thermal stability during interrupted and continuous milling of ISO groups P (steel) and K (cast iron). This coated carbide technology is tailored to withstand the abrasive characteristics of cast iron and the heat common when machining steels, resulting in extended edge life and fewer unscheduled tool changes. The outcome is measurable: longer productive intervals and a more predictable tool-cost profile. Geometry that stabilises cutting and improves surface quality The parallelogram 85° plate form with a 15° relief angle creates a stable cutting engagement that reduces radial forces and vibration in many milling set-ups. The specified corner radius 5 increases edge robustness, improving tool life when machining interrupted cuts or roughing passes, while supporting a consistent surface finish on the workpiece. Together, these geometric features aid in achieving repeatable results and simplify process planning for CNC programmes. Practical dimensions and handling for efficient tool management With a nominal size of 16 and plate thickness 06, the insert fits common milling cutter bodies and supports multi-edge indexing for economical use of cutting edges. The F56 chipbreaker is optimised for controlled chip segmentation in mixed workpiece batches, which reduces toolholder cleaning and machine downtime. The insert's indexable nature allows quick replacement and immediate return to production, making it suitable for job shops and serial production environments seeking fast throughput. Proven brand performance and application guidance Walter Tools' Tiger·tec Silver line is recognised for stable chip formation and broad material coverage; the WKP35S variety is a coated carbide class engineered specifically for durable performance on steel and cast iron. For customers aiming to balance productivity and tool life, this insert provides a reliable option that supports consistent process windows and surface quality. Application parameters should be selected according to cutter diameter, depth of cut and machine rigidity to exploit the insert's full potential. Contact Metav Werkzeuge for tailored cutting data and ordering of original Walter Tools Tiger·tec Silver inserts; our consultants will advise on optimal insert geometry and chipbreaker choices for specific steel and cast iron applications. Technical data Article number / SKU: ADMT160650R-F56-WKP35S-WALTER Designation: ADMT160650R-F56 WKP35S Product type: milling indexable insert (Fräswendeschneidplatte) Brand: Walter Tools Series: Tiger-tec Silver Core technical data Size: 16 Thickness: 06 Relief angle: 15° Plate form: Parallelogramm 85° Corner radius: 5 Tolerance class: M Special features and compatibility Grade: WKP35S Coating technology: Tiger·tec Silver Substrate: coated carbide Chipbreaker: F56 Execution: T Material suitability: P (steel), K (cast iron) FAQ What materials is this insert suitable for? The ADMT160650R-F56 WKP35S insert is engineered for ISO groups P (steel) and K (cast iron), exploiting the Tiger·tec Silver coating and WKP35S grade for stable performance on these materials. How does the insert geometry affect machining stability? The parallelogram 85° form combined with a 15° relief reduces radial loads and helps stabilise cutting action, while the corner radius 5 enhances edge strength for interrupted cuts and improves surface finish consistency. Is this a multi-edge indexable insert? Yes; the insert is indexable and designed for multi-edge use in suitable milling cutter bodies, allowing economical edge changes and reduced inventory cost per usable cutting edge. Which chipbreaker does the insert use and what is its benefit? The insert features the F56 chipbreaker, which aids controlled chip segmentation when machining mixed steel and cast iron batches, improving machining reliability and reducing manual chip handling. Can Metav Werkzeuge provide application data for this insert? Metav Werkzeuge can supply recommended cutting parameters and help match the ADMT160650R-F56 WKP35S to cutter bodies and machining conditions to ensure optimised performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product from the manufacturer.
ADMT160650R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
High-performance coated carbide insert that combines Tiger·tec Gold resilience with the WSM35G grade for dependable machining of stainless steels and heat‑resistant alloys; the parallelogram 85° geometry and F56 chipbreaker deliver stable chip control and surface quality. Order the ADMT160650R-F56 WSM35G directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. ADMT160650R-F56 WSM35G — Parallelogram 85° milling insert, Tiger·tec Gold (Walter Tools) The ADMT160650R-F56 WSM35G is an indexable milling insert designed for demanding operations on stainless steels and heat‑resistant superalloys, offering robust edge stability and controlled chip formation for productive milling cycles Tiger·tec Gold coating for heat resistance WSM35G grade for stable cutting edges Parallelogram 85° geometry for robustness F56 chipbreaker for predictable chip control Increased productivity through coating and grade The combination of Tiger·tec Gold coating with the WSM35G coated‑carbide grade is engineered to resist thermal degradation and maintain a sharp cutting edge over extended cycles. This results in longer tool life and fewer tool changes, directly reducing machine downtime and improving throughput. For components made from stainless steel or heat‑resistant alloys, the coated substrate supports secure chip formation and lowers the risk of built‑up edge, helping to keep tolerances stable across batches. Geometry that improves process stability and surface finish The parallelogram 85° shape, in combination with a 15° clearance angle and a 5 corner radius, provides a stiff cutting geometry that absorbs loads during interrupted cuts and heavy engagement. The F56 chipbreaker promotes fragmentation of chips in sticky or ductile materials, improving evacuation and reducing rework. As a result, workpieces show a more consistent surface quality while the cutting tool sustains fewer thermal and mechanical shocks. Versatile application scope for demanding materials Marked for ISO groups M and S, the insert is suitable for machining stainless steel and heat‑resistant superalloys or titanium depending on the holder and cutting data. The tolerance class M ensures reproducible seating in clamping systems, supporting repeatable indexations and predictable tool performance. When paired with appropriate cutters, this insert supports both heavy material removal and semi‑finishing operations without sacrificing process reliability. Proven brand performance and application support Produced by a recognised name in precision tooling, the insert benefits from Walter Tools’ design focus on consistent edge quality and process security. For complex applications or unfamiliar alloys, technical consultation is recommended to identify optimal insert geometry, holder choice and cutting parameters. If further machining data or application advice is required, Metav Werkzeuge provides specialist support and can assist with selection and implementation. Discuss application strategy for the most demanding stainless‑steel and superalloy jobs with Metav Werkzeuge to make the most of Walter Tools' Tiger·tec Gold technology — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT160650R-F56-WSM35G-WALTER Label: Fräswendeschneidplatte ADMT160650R-F56 WSM35G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Facts Clearance angle: 15° Corner radius: 5 Insert size: 16 Thickness: 06 Chipbreaker: F56 Shape: Parallelogram 85° Tolerance class: M Execution: T Special features Coating: Tiger·tec Gold Substrate: Coated carbide Material designation: S / M Suitable for: stainless steel (ISO M) Suitable for: heat‑resistant superalloys and titanium (ISO S) Series description: WSM35G – coated carbide for demanding materials FAQ Is this insert suitable for stainless steel? Yes. The ADMT160650R-F56 WSM35G is specified for ISO group M and is optimised to handle the heat and adhesion tendencies of stainless steel while promoting stable chip formation. Can the insert be used on superalloys or titanium? The WSM35G grade is designed for extended application range and, with appropriate cutting data, can be used on heat‑resistant superalloys and titanium as indicated by the ISO S designation. What advantages does the parallelogram 85° geometry provide? The parallelogram 85° form increases rigidity and load distribution during milling, improving edge stability and enabling reliable performance in interrupted cuts and heavy‑duty operations. What role does the F56 chipbreaker play? The F56 chipbreaker encourages predictable chip fragmentation in ductile or gummy materials, aiding evacuation and reducing the risk of built‑up edge, which supports consistent surface finish. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating increases thermal resistance and wear protection of the coated carbide substrate, helping to maintain cutting edge integrity and extend effective tool life under elevated temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT160650R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G grade for P/M/S materials and the parallelogram 85° form to ensure stable, productive milling; order the insert via Metav Werkzeuge or consult the technical team for process alignment. ADMT160650R-F56 WSP45G – Parallelogram 85° milling insert, Tiger·tec Gold by Walter Tools A ADMT160650R-F56 WSP45G milling insert engineered for versatile steel, rostfreier Stahl and high-temperature alloy machining in medium-tolerance milling applications. Tiger·tec Gold PVD coating Suitable for steel, rostfreier Stahl and superalloys Parallelogram 85° form for stable cutting 15° clearance angle and 5 mm corner radius Durable coating for longer cutting cycles and process reliability The coated Tiger·tec Gold surface and the WSP45G grade combine to deliver improved wear resistance and controlled chip formation during milling. This combination is designed to reduce flank wear and support longer tool life under cyclic loads. The PVD-coated carbide formulation provides thermal stability that helps maintain edge integrity when machining steels and rostfreier Stahl, which typically generate higher temperatures and work-hardening at the cut. By selecting a grade optimised for these conditions, milling operations gain predictability and fewer insert changes, contributing to reduced machine downtime and more consistent component quality. Geometry that promotes stability and predictable surface finish The parallelogram 85° configuration and the specified 5 mm corner radius are intended to balance strength at the cutting edge with a favourable engagement angle in slotting and shoulder milling. The geometry supports a steady cutting force distribution, which stabilises the machining process and helps achieve an improved surface finish with fewer vibrations. The 15° clearance angle reduces rubbing on the flank while supporting positive cutting action; together, these parameters make the insert suitable for a range of roughing-to-finishing transitions without frequent retooling. Application breadth: suited for P, M and S material groups Designed for the ISO material groups P (steel), M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), the insert offers a broad machining envelope. The WSP45G grade is formulated for toughness and edge security, making it appropriate where stable chip formation is required across varying workpiece materials. In practice, this means fewer grade swaps and a simplified inventory for shops that handle mixed-material batches, while still delivering reliable cutting performance and dimensional consistency. Process advantages and handling recommendations With a focus on productive milling, the ADMT160650R-F56 WSP45G insert benefits from the F56 chipbreaker pattern, which supports controllable chip flow in interrupted and continuous cuts. For best results, pair the insert with stable tool holders and appropriate coolant or high-pressure air where chip evacuation is critical—especially when machining rostfreier Stahl or superalloys. The insert’s medium tolerance class supports repeatable pocketing and face-milling operations, making it a practical choice for both job-shop and production environments seeking a balance between economy and performance. Contact Metav Werkzeuge for tailored application advice and to order the ADMT160650R-F56 WSP45G Tiger·tec Gold milling insert directly: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: ADMT160650R-F56-WSP45G-WALTER SKU: ADMT160650R-F56-WSP45G-WALTER Name: Fräswendeschneidplatte ADMT160650R-F56 WSP45G Walter Tools Manufacturer: Walter Tools Facts Grade: WSP45G Series: Tiger·tec Gold Clearance angle: 15° Corner radius: 5 Insert size: 16 Thickness designation: 06 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD-coated carbide) Material applicability: P / M / S Chipbreaker: F56 Insert form: Parallelogram 85° Execution: T ISO designation: ADMT160650R-F56 WSP45G Series description: Tough, versatile PVD grade for milling FAQ What materials is this insert suitable for? The ADMT160650R-F56 WSP45G insert is suitable for P (steel), M (rostfreier Stahl) and S (heat-resistant superalloys and titanium) material groups, reflecting its versatile WSP45G formulation. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on this milling insert improves wear resistance and thermal stability, leading to longer tool life and more consistent edge performance under typical milling temperatures. Which chipbreaker is fitted and what does it do? This insert uses the F56 chipbreaker, designed to promote controlled chip formation and evacuation, especially useful in a mix of continuous and interrupted cuts. What cutting geometry contributes to stability? The parallelogram 85° form combined with a 15° clearance angle and 5 mm corner radius offers a balance of edge strength and positive cutting action, improving process stability and surface finish. Is this insert suitable for finishing and roughing? Yes; the grade and geometry make the insert capable of handling transitions from roughing to finishing, provided cutting parameters are adjusted to match the workpiece material and rigidity of the setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new merchandise from the manufacturer.
ADMT160660R-F56 WKP35G Wendeplatten - Walter Tools
Combine the Tiger-tec Gold coating with the WKP35G grade for robust machining of steel and cast iron; the parallelogram 85° geometry and chipbreaker F56 deliver stable chip control and consistent part quality. Order directly via Metav Werkzeuge or contact our consultants for tailored application support. ADMT160660R-F56 WKP35G Milling Indexable Insert (Parallelogram 85°, 15° clearance) — Walter Tools The ADMT160660R-F56 WKP35G is a high-productivity milling insert designed for demanding machining of steel and cast iron, combining a wear-resistant coating with an optimised chipformer for reliable series production. Tiger-tec Gold coating for wear resistance WKP35G grade optimised for steel and cast iron Parallelogram 85° geometry for secure seating Chipbreaker F56 for controlled chip formation Increased process reliability with advanced coating technology The Tiger-tec Gold coating together with the WKP35G carbide grade reduces abrasive wear and extends tool life in continuous production. This combination is engineered to handle the thermal and mechanical loads typical when machining steel and cast iron, providing a predictable tool life and fewer unscheduled changes. The coating’s wear resistance supports stable cutting edge behaviour, which in turn contributes to sustained dimensional accuracy and reduced scrap rates. For production environments where cycle time and repeatability matter, this insert offers a measurable improvement in throughput. Geometry and chip control that simplify machining The parallelogram 85° shape and 15° clearance angle produce a secure seating in compatible toolholders and a favourable cutting direction for many milling strategies. The integrated chipbreaker F56 shapes chips to avoid entangling and to assist coolant access, which helps maintain surface integrity and reduces tool‑to‑part heat build-up. The corner radius 6 contributes to edge strength for roughing passes while still enabling acceptable surface finish when used appropriately. Together, these geometrical features support both stable roughing and reliable semi‑finishing operations. Practical advantages for workshop efficiency and tool management As an indexable insert, the ADMT160660R-F56 series enables rapid reconditioning of a tool assembly by indexing to a fresh cutting edge rather than replacing the complete cutter. This reduces downtime and lowers per‑component machining costs. The predictable performance of the WKP35G grade and the Tiger‑tec Gold technology simplifies tool selection and inventory planning, allowing production planners to standardise on a robust solution for a broad range of steel and cast iron tasks. For specialised material mixes or geometry constraints, consult application data to optimise cutting parameters. For tailored machining data, availability or to discuss the suitability of Walter Tools Tiger‑tec Gold inserts for specific steel or cast iron applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a technical advisor about the ADMT160660R-F56 WKP35G Technical Data SKU: ADMT160660R-F56-WKP35G-WALTER Name: Fräswendeschneidplatte ADMT160660R-F56 WKP35G Manufacturer: Walter Tools Core specifications Size: 16 Thickness: 06 Corner radius: 6 Relief angle: 15° Tolerance class: M Form: Parallelogram 85° Features & applications Series: Tiger-tec Gold Grade: WKP35G Chipbreaker: F56 Grade material: P / K Suitable for: steel, cast iron Execution: T FAQ What materials is this insert intended for? The ADMT160660R-F56 WKP35G is intended primarily for steel (P) and cast iron (K) applications, following the ISO grouping for the WKP35G grade. What benefits does the Tiger‑tec Gold technology provide? Tiger‑tec Gold coating gives enhanced wear resistance and thermal stability, which improves edge life and process robustness when machining abrasive or adhesive materials. How does the parallelogram 85° geometry affect performance? The parallelogram 85° form offers secure seating and a positive cutting orientation that supports stable cutting forces and predictable tool behaviour in many milling operations. Is the chipbreaker suitable for both roughing and finishing? The chipbreaker F56 is designed to provide controlled chip formation and good evacuation; combined with the correct cutting data it supports productive roughing and reliable semi‑finishing. Can inserts be indexed or replaced on the fly? Yes, these are indexable milling inserts; edges can be rotated or replaced to restore cutting performance, reducing the need for full cutter replacement and minimising downtime. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (market appearance: Walter Tools) with headquarters in Tübingen belongs to the leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
ADMT160660R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and consistent chip control; the insert’s parallelogram 85° geometry with 15° clearance and a 6 mm corner radius provides stable cutting under demanding milling conditions. Order the ADMT160660R-F56 WKP35S directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160660R-F56 WKP35S indexable milling insert — Tiger·tec Silver, for steel and cast iron — Walter Tools A ADMT160660R-F56 WKP35S indexable milling insert designed for productive machining of steel and cast iron in general milling applications. Tiger·tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining Parallelogram 85° shape with 15° clearance 6 mm corner radius for stable cutting edge High productivity through optimised grade and coating The combination of the WKP35S grade and Tiger·tec Silver coating delivers a balance of wear resistance and fracture toughness, making the insert particularly effective for the thermal and mechanical demands of machining steel and cast iron. The coating technology reduces adhesive wear and improves surface finish, while the underlying coated carbide substrate provides shock resistance. These features translate into higher productivity and longer periods between index changes, reducing overall process interruptions and improving shop-floor efficiency. Geometry and ISO suitability explained for reliable application The insert’s parallelogram 85° form with a 15° clearance angle gives a robust edge orientation that supports radial and axial milling forces. The 6 mm corner radius enhances edge strength for stable engagement in heavier cuts, while the size 16 designation and tolerance class M define the mechanical fit and repeatability in the toolholder. The material code P / K refers to ISO groups: P covers various steels and K indicates cast iron — the grade is tuned to the chip formation and abrasive conditions typical of these families, ensuring predictable behaviour during operation. Practical benefits for process security and tool handling Using this grade and geometry results in predictable wear patterns and consistent chip control, which supports process planning and cost-efficiency. The chipbreaker F56 helps to form controllable chips when machining common steels and grey or nodular cast irons, reducing the risk of chip-related interruptions. As part of a system-oriented approach, this insert complements Walter Tools’ broader portfolio of precision tooling to achieve repeatable results and improved component surface quality. For application guidance and availability of Walter Tools inserts including the ADMT160660R-F56 WKP35S, contact Metav Werkzeuge for tailored recommendations and order support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: ADMT160660R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT160660R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Numbers / Core Technical Data Clearance angle: 15° Corner radius: 6 Shape: Parallelogram 85° Plate size: 16 Thickness: 06 Tolerance class: M Designs / Special Features Grade: WKP35S Coating/technology: Tiger·tec Silver Material suitability: P / K (steel, cast iron) Chipbreaker: F56 Base designation: ADMT160660R-F56 ISO designation: ADMT160660R-F56 WKP35S FAQ Which materials is the insert suited for? The ADMT160660R-F56 WKP35S is specified for machining steel and cast iron, corresponding to ISO material groups P and K. What does the Tiger·tec Silver treatment provide? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, extending tool life and supporting consistent surface quality when cutting steels and cast irons. How does the parallelogram 85° geometry affect machining? The parallelogram 85° geometry with a 15° clearance angle offers a stable cutting orientation, distributing loads across the cutting edge and aiding secure seating in compatible toolholders. Are size and tolerance information available for machine setup? Yes — the insert is marked size 16, thickness 06, and tolerance class M, which define its mechanical fit and interchangeability in standard clamping systems. Is this insert suitable for stainless steel? Stainless steel suitability is not specified for this grade; the ADMT160660R-F56 WKP35S is optimised for steel and cast iron as per the provided designation. Walter Tools: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for descriptive purposes; there is no affiliation between our company and the trademark holders. The offered item is an original, factory-new product of the respective manufacturer.
ADMT160660R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of high process stability and the wear-resistant Tiger·tec Gold grade WSM35G to maintain steady production when machining demanding alloys; order directly via Metav Werkzeuge or contact the consultants for tailored tool recommendations. ADMT160660R-F56 WSM35G – Indexable milling insert (Parallelogram 85°), Walter Tools, 15° clearance The ADMT160660R-F56 WSM35G is an indexable milling insert engineered for machining rostfreier Stahl and heat‑resistant superalloys, combining Tiger·tec Gold coating with a robust parallelogram geometry for consistent chip control and edge security Tiger·tec Gold coating for improved tool life Optimised for rostfreier Stahl and superalloys Parallelogram 85° geometry for secure clamping 15° clearance and 6 corner radius for edge strength Durable grade for demanding materials and stable chip formation The Walter grade WSM35G, manufactured within the Tiger·tec Gold series, is a coated carbide solution developed for machining rostfreier Stahl and high‑temperature alloys. Its substrate and coating chemistry promote stable chip formation and reduced edge build‑up in materials that otherwise tend to adhere to the cutting edge. By choosing this grade, workshops benefit from extended cutting intervals and more predictable wear behaviour, which supports higher machine utilisation and fewer unscheduled interruptions. Geometry that increases clamping security and cutting reliability The parallelogram 85° shape and a 15° clearance angle deliver a positive, stable cutting engagement that reduces vibrations and improves surface finish during peripheral milling. The specified 6 corner radius and the insert thickness correspond to enhanced edge strength, particularly during interrupted cuts or heavier radial engagement. These geometry attributes result in reliable seat retention and consistent cutting forces, which in turn reduce the frequency of insert changes and fixture re‑adjustments on the shop floor. Productivity gains and consistent process results Equipping milling tools with the coated WSM35G inserts supports measurable productivity improvements: longer effective tool life lowers inventory turnover and reduces machine downtime for tooling changes. The coating and substrate combination aids thermal resistance and wear control, delivering process reliability and repeatable surface quality across batches. For production environments facing mixed series or small batch runs, the predictable performance of this insert promotes shorter setup times and steadier throughput. Practical applications and selection guidance This insert is particularly suitable where components are machined from rostfreier Stahl (ISO group M) or heat‑resistant superalloys and titanium (ISO group S). Typical uses include finishing and semi‑finishing passes where consistent surface integrity and tool life are priorities. When integrating the insert into an existing tool system, match the cutter body clamping to the parallelogram seat and consider the corner radius relative to required edge strength and surface finish. For specific machining parameters, consult the technical specialists at Metav Werkzeuge to optimise cutting data for the given workpiece material and machine capability. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools Tiger·tec Gold inserts and to discuss optimal cutter configurations and cutting data Technical data SKU: ADMT160660R-F56-WSM35G-WALTER Designation: ADMT160660R-F56 WSM35G Series: Tiger-tec Gold Grade: WSM35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Numbers / Core technical data Clearance angle: 15° Corner radius: 6 Insert size: 16 Thickness: 06 Tolerance class: M Designs / Special features Parallelogram 85° insert form Chipbreaker: F56 Execution: T Material applicability: S / M Suitable for rostfreier_stahl material application FAQ What materials is this insert suitable for? The ADMT160660R-F56 WSM35G insert is specified for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), providing stable cutting behaviour in these challenging materials. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WSM35G grade enhances thermal resistance and wear control, which improves tool life and supports consistent surface quality across production runs. Which machine applications are typical for this insert geometry? The parallelogram 85° form and 15° clearance are optimised for peripheral and face milling operations where clamping stability and reduced vibration enhance part finish and repeatability. Is the ADMT160660R-F56 WSM35G compatible with standard cutter bodies? Compatibility depends on the cutter body seat geometry; the ADMT‑style parallelogram insert requires a matching pocket and clamping system. Verify seat type and clamping method with Metav Werkzeuge if uncertain. What is the main advantage of the 6 corner radius? A larger corner radius increases edge strength during interrupted cuts and heavy engagement, reducing edge chipping and improving the life of the cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product from the manufacturer Walter Tools.
ADMT160660R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating and the WSP45G grade for consistent edge stability and reliable chip control; the parallelogram geometry with a 15° relief angle supports productive milling across diverse alloys. For procurement or application advice, order the insert directly via Metav Werkzeuge or consult our technical team. ADMT160660R-F56 WSP45G milling indexable insert — Walter Tools, Tiger·tec Gold PVD, F56 chipbreaker ADMT160660R-F56 WSP45G is a PVD-coated milling insert designed for general milling tasks, offering a balance of wear resistance and toughness for steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating for improved wear resistance Versatile WSP45G grade for steel, stainless, titanium Parallelogram 85° shape with 15° relief angle 6 mm corner radius, 06 plate thickness for stability Durable cutting performance through advanced coating and grade The combination of Tiger·tec Gold coating and the WSP45G cutting grade yields a PVD-coated carbide solution tailored for demanding milling operations. This pairing enhances wear resistance while retaining sufficient toughness to resist chipping under intermittent cutting conditions. The coated substrate reduces flank wear and extends usable life, supporting longer production cycles and fewer index changes. Such material pairing is particularly effective where thermal loads fluctuate, enabling steady performance and predictable tool-change intervals. Geometry engineered for stable chip control and surface quality The insert’s parallelogram 85° configuration, together with a 15° relief angle, produces a reliable cutting engagement that combines shear action with controlled chip flow. The integrated F56 chipbreaker promotes consistent fragmenting of swarf, reducing the risk of re-cutting and smoothing evacuation through the flute. With a 6 mm corner radius and a plate designation of 06, the geometry favours edge strength and process security, improving surface finish and resistance to thermal-mechanical stress during slotting and face milling operations. Broad material applicability for flexible shop-floor use Designed for universal milling tasks, the grade supports ISO groups P / M / S — that is, unalloyed and alloyed steel, stainless steel and heat-resistant alloys or titanium. The WSP45G composition focuses on maintaining a stable cutting edge in materials prone to toughness and high cutting temperatures, while still offering good wear control in standard steels. This breadth of application simplifies tooling choices and reduces the need for multiple specialised grades when handling mixed-production runs. Process efficiency, handling and economic benefits As an indexable insert, the ADMT160660R-F56 WSP45G reduces non-productive time through simple indexing and consistent reconditioning intervals. The PVD surface treatment and chipbreaker design support predictable tool life, lowering the total cost per component and improving overall equipment effectiveness. Supplied in standard ISO designation for quick identification, the insert integrates with common tooling systems and is available through Metav Werkzeuge for immediate sourcing; technical advice is available to match the insert to specific holders and milling strategies. Discuss the ADMT160660R-F56 WSP45G’s suitability for specific applications with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to request application guidance or place an order referencing this Walter Tools insert Technical data Article number: ADMT160660R-F56-WSP45G-WALTER Description: Fräswendeschneidplatte ADMT160660R-F56 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Core specifications Relief angle: 15° Corner radius: 6 Insert shape: Parallelogram 85° Insert size: 16 Plate thickness: 06 Tolerance class: M Applications & features Material compatibility: P / M / S (steel, stainless steel, heat-resistant alloys/titanium) Chipbreaker: F56 Grade type: coated carbide (PVD) ISO designation: ADMT160660R-F56 WSP45G Execution: T FAQ What materials is this insert suitable for? The ADMT160660R-F56 WSP45G milling insert is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat-resistant alloys including titanium. How does the Tiger·tec Gold coating help in milling? The Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and thermal stability, which extends edge life and supports consistent cutting performance during interrupted and continuous milling. Which toolholders are compatible with the ADMT160660R-F56 WSP45G? The insert follows the ADMT ISO designation and is compatible with toolholders designed for ADMT1606-style inserts; check holder clamping geometry and seat for the parallelogram 85° form. What advantages does the F56 chipbreaker provide? The F56 chipbreaker promotes controlled chip formation and evacuation, lowering the risk of re-cutting and improving surface finish while supporting stable tool life in a range of materials. Is the corner radius suitable for heavy roughing? The 6 mm corner radius and plate thickness 06 provide enhanced edge strength, making the insert appropriate for robust engagement and improved resistance to mechanical and thermal stress during heavy milling passes. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the listed manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT180712R-D56 WKK25G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the WKK25G grade and the D56 chipbreaker delivers durable performance and reliable chip control for cast‑iron machining; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADMT180712R-D56 WKK25G Fräswendeschneidplatte by Walter Tools — Tiger‑tec Gold, optimised for cast iron ADMT180712R-D56 WKK25G is an indexable milling insert designed for secure seating and efficient material removal in cast‑iron applications. Tiger‑tec Gold coating for extended life Optimised for cast iron machining (K) Parallelogram 85° shape for stable clamping Chipbreaker D56 for short, controlled chips Extended tool life through advanced coating technology The combination of the Tiger‑tec Gold surface treatment and the WKK25G coated carbide composition prioritises resistance to abrasive wear typical of cast‑iron workpieces. This engineered coating maintains cutting edge integrity under frequent, short‑chipping conditions, which means fewer tool changes and longer intervals between indexings. The result is improved process efficiency and predictable tool life, supporting uninterrupted production cycles and lower overall tooling costs. Geometry that stabilises cutting and improves productivity The parallelogram 85° insert form and D56 chipbreaker work together to secure the insert in the cutter body and promote short, easily evacuated chips. The 15° relief angle reduces rubbing at the flank while maintaining a robust cutting edge, and the 1.2 mm corner radius increases edge strength for interrupted cuts. Together these features reduce vibration and rework, translating into steadier feed rates and higher throughput in demanding milling operations. Consistent quality control for series production Specified in tolerance class M, the design ensures dimensional consistency between indexings and across batches, which is essential for repeatable, high‑volume manufacturing. The insert’s properties favour predictable surface finish and repeatable pocketing operations on abrasive cast materials, allowing process planners to rely on stable cycle times and steady component quality rather than frequent parameter adjustments. Practical compatibility and workshop handling Sized as a nominal 18 insert with thickness designation 07, the plate fits commonly used milling bodies and is clearly classified for K (cast iron) applications according to ISO guidance. The grade’s behaviour—optimised for short, breaking chips—simplifies chip management in the machine tool environment and reduces the risk of built‑up edge. The insert is part of Walter Tools’ Tiger‑tec Gold series and is suitable where robust, wear‑resistant performance is required for cast‑iron components in industrial machining. Contact Metav Werkzeuge for tailored cutting data or component‑specific recommendations for this Walter Tools ADMT180712R‑D56 WKK25G milling insert Technical Data Article number: ADMT180712R-D56-WKK25G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Core dimensions Size: 18 Thickness: 07 Corner radius: 1.2 mm Relief angle: 15° Plate form: Parallelogramm 85° Tolerance: M Design & material features Chipbreaker: D56 Material group: K (cast iron) Coated carbide (beschichtetes Hartmetall) Execution: T FAQ Is this insert suitable for cast‑iron machining? Yes. The ADMT180712R‑D56 WKK25G is specifically optimised for cast‑iron (K) applications, with the WKK25G grade and Tiger‑tec Gold coating tuned to resist abrasive wear and handle short, breaking chips. What benefit does the D56 chipbreaker provide? The D56 chipbreaker promotes short, controlled chips that are easier to evacuate, reducing downtime from chip jams and improving machining reliability when using the ADMT180712R‑D56 WKK25G insert. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength for interrupted cuts and enhances finish quality on cast parts while balancing cutting forces to protect the coated edge. Which cutter bodies accept this insert form? The parallelogram 85° shape of the insert is intended for milling bodies that accommodate ADMT‑style plates; compatible bodies provide secure clamping and correct seat geometry for best performance. What production advantages can be expected from the Tiger‑tec Gold series? Inserts from the Tiger‑tec Gold series deliver extended tool life and consistent wear behaviour, which supports stable cycle times and lower tooling consumption in serial machining of cast‑iron components. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT180712R-D56 WKP25S Wendeplatten - Walter Tools
The combination of coated carbide durability and a geometry tuned for chip control delivers reliable, repeatable milling in steel and cast iron; this reduces tool changes and supports steady production. Order original Walter Tools inserts through Metav Werkzeuge or consult our specialists for application-specific selection. ADMT180712R-D56 WKP25S milling insert — Tiger‑tec Silver coated, for steel and cast iron | Walter Tools The ADMT180712R-D56 WKP25S is a Tiger‑tec Silver coated carbide milling insert engineered for productive face and shoulder milling in steel and cast iron. Tiger‑tec Silver coated carbide for durability Parallelogram 85° shape for versatile milling Optimised D56 chipbreaker for controlled chips Suitable for steel and cast iron machining Higher productivity through material‑matched grade The WKP25S grade, part of the Tiger‑tec Silver series, is a coated carbide formulation developed specifically for the thermal and mechanical demands of machining steel (P) and cast iron (K). The result is a stable cutting edge that tolerates the heat generation typical of steel machining while resisting abrasive wear from cast iron. By matching grade chemistry and coating to the workpiece group, this insert delivers consistent cutting performance and a longer tool life, which translates into fewer tool changes and a more economical machining process. Geometry that controls chips and improves surface results A parallelogram 85° outline combined with a 15° clearance angle creates a cutting geometry that balances rigidity and accessibility in shoulder and face milling operations. The D56 chipbreaker is optimised for producing short, manageable chips in a wide range of feeds, reducing the risk of built‑up edge and improving chip evacuation. The corner radius 1.2 mm contributes to a robust cutting edge that enhances surface finish while absorbing intermittent loading. Together, these features reduce downtime and support reliable part quality when machining both unalloyed and alloyed steels as well as grey and nodular cast irons. Practical handling and application advantages The insert follows common industry dimensions, with the designation ADMT180712R‑D56 and the size code 18, thickness code 07 and tolerance class M, so it fits standard Walter Tools milling holders designed for this family. The insert’s specification supports operations at productive cutting speeds and moderate feeds; when used with appropriate tool holders and stable fixturing, the grade and chipbreaker combination facilitate repeatable results across batch and single‑piece production. Maintenance benefits include fewer regrinds and predictable edge wear, helping to keep cycles on schedule. For technical selection, availability and application recommendations for Walter Tools ADMT180712R‑D56 WKP25S inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented advice and delivery options. Technical data Article number: ADMT180712R-D56-WKP25S-WALTER Designation: ADMT180712R-D56 WKP25S Manufacturer: Walter Tools SKU: ADMT180712R-D56-WKP25S-WALTER Facts Relief / clearance angle: 15° Corner radius: 1.2 mm Shape: Parallelogram 85° Size code: 18 Thickness code: 07 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D56 Suitable for: Steel (P), Cast iron (K) Series: Tiger‑tec Silver Application: Milling insert (face/shoulder milling) FAQ Which materials are best processed with this insert? The ADMT180712R‑D56 WKP25S insert is optimised for steel (P) and cast iron (K); the WKP25S grade and Tiger‑tec Silver coating address typical heat and abrasion patterns for these materials. What does the D56 chipbreaker achieve in practice? The D56 chipbreaker on this Walter Tools insert is designed to produce short, controllable chips across common feed ranges, improving chip evacuation and reducing the risk of built‑up edge during milling. How does the parallelogram 85° form benefit milling operations? A parallelogram 85° design offers good strength at the cutting edge while allowing access for shoulder and face milling; this geometry, together with the 15° clearance, balances rigidity and cutting accessibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer. Walter Tools is the trade name of Walter AG, part of the Sandvik Group.
ADMT180712R-D56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life, reliable chip control and versatile application for steel and cast iron to keep production stable and predictable; order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge specialists for application support. ADMT180712R-D56 WKP35G milling indexable insert — Tiger·tec Gold, D56 chipbreaker | Walter Tools The ADMT180712R-D56 WKP35G is a milling indexable insert developed for productive face and shoulder milling in steel and cast iron, combining a Tiger·tec Gold coated grade with a robust D56 chipbreaker for consistent chip control and surface finish. Tiger·tec Gold coating for extended tool life Optimised D56 chipbreaker for stable chip control Parallelogram 85° form for robust milling geometry 1.2 mm corner radius for improved edge strength High-performance coating and grade for predictable machining The insert is equipped with the Tiger·tec Gold coating and the WKP35G coated-carbide grade, designed to deliver extended tool life and reproducible cutting performance. This combination reduces wear under the thermal and mechanical loads typical of machining steel and cast iron, providing a clear efficiency advantage in serial production. The coated-carbide substrate and engineered top layer work together to slow flank and crater wear, thereby reducing tool changes and improving process stability. Geometry and chip control that support surface quality The D56 chipbreaker and the Parallelogram 85° shape provide controlled chip formation and reliable engagement at common milling angles. With a 15° clearance and a 1.2 mm corner radius, the geometry balances edge strength and entry behaviour to maintain a consistent surface finish while resisting chipping. The chipbreaker is tailored to break and evacuate swarf typical of the targeted material groups, which helps to reduce rework and downtime caused by poor chip evacuation. Operational advantages that lower unit costs Standardised dimensions such as the 18 mm size and the thickness code 07 simplify tool inventory and holder selection, contributing to lower tooling management effort. The coated grade supports higher process security through longer tool life, which in turn reduces costs per component and increases productive machine time. Technical consultation and cutting data are available from Metav Werkzeuge to match machining strategies to production goals, ensuring the insert is integrated efficiently into existing workflows. Practical explanation and handling notes for workshop integration As an indexable milling insert, the component is mounted into a dedicated cutter body and indexed when an edge is spent, avoiding the need for regrinding; this makes the solution both economical and easy to implement in shop-floor routines. Proper seating and clamping are essential for achieving the stated performance: clean seating surfaces and the correct clamp torque ensure repeatable positioning and protect the cutting edge. For operators less familiar with insert geometry, the built-in chip control and robust edge radius make the component forgiving under a range of feed and speed conditions. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and request cutting-data recommendations to match specific production requirements Technical Data SKU: ADMT180712R-D56-WKP35G-WALTER Item designation: ADMT180712R-D56 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 1.2 mm Insert size: 18 mm Thickness code: 07 Plate form: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: D56 Material suitability: P / K (steel and cast iron) Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suitable for? The ADMT180712R-D56 WKP35G insert is specified for machining steel and cast iron (material groups P and K), utilising the Tiger·tec Gold grade for those workpiece types. How does the D56 chipbreaker affect machining? The D56 chipbreaker is engineered to manage chip formation for the stated materials, improving evacuation and reducing the risk of built-up edge, which helps to maintain a consistent surface finish with the ADMT180712R-D56 WKP35G. Which geometry features enhance edge strength? The 1.2 mm corner radius together with the Parallelogram 85° form increases edge robustness and reduces the likelihood of chipping during interrupted cuts when using the ADMT180712R-D56 WKP35G insert. Is this insert compatible with standard ADMT toolholders? The insert follows the ADMT series designation and is intended for holders that accept the ADMT180712R-D56 geometry; matching the insert to a suitable cutter body is recommended to exploit the full performance potential of the Walter Tools solution. Where can cutting data or application support be obtained? Application support and cutting recommendations for the ADMT180712R-D56 WKP35G are available from Metav Werkzeuge; technical consultation can help optimise feeds, speeds and tool life for specific production requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and to clarify product compatibility. There is no affiliation or partnership between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
ADMT180712R-D56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for stable chip formation and long tool life; the parallelogram 85° geometry with a 15° relief ensures dependable process security in steel and cast iron machining. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. ADMT180712R-D56 WKP35S milling insert — Parallelogram 85° for steel & cast iron (Walter Tools) ADMT180712R-D56 WKP35S is a carbide milling insert designed for efficient machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating for long tool life For steel and cast iron machining Parallelogram 85° geometry with 15° relief R1.2 corner radius for robust edge strength Efficient machining through optimised grade and coating The combination of the WKP35S grade and Tiger·tec Silver coating delivers a balance of wear resistance and toughness that is targeted at steel and cast iron applications. This coated carbide formulation reduces flank and crater wear during interrupted cuts, which translates into longer tool life and fewer index changes. For production shops seeking predictable tool performance, the result is higher productivity and reduced downtime through consistent insert life. Reliable chip control and stable cutting geometry The parallelogram 85° insert form and the D56 chipbreaker are configured to manage chip flow and heat dissipation during face and shoulder milling. The 15° relief angle helps maintain cutting stability under varying engagement angles, while the R1.2 corner radius increases edge strength and reduces risk of chipping. These geometric features improve surface finish and reduce machining vibrations, supporting repeatable results even in mixed-production environments. Practical benefits in program and process planning With the compact size code and standard tolerance class M, the indexable insert fits common cutter bodies and clamping systems, easing integration into existing tool assemblies. The designation ADMT180712R-D56 indicates the insert family and geometry, allowing straightforward selection in tool lists and CAM setups. By favouring a grade engineered for both P and K workpiece groups, shops can streamline tooling variants and cut management complexity across jobs involving unalloyed and alloyed steels as well as cast components. Designed for consistent workshop performance The insert is intended for industrial milling tasks where process reliability and stable chip formation are priorities. The coated carbide and chipbreaker combination helps control abrasive wear typical of cast iron while coping with the heat and chip morphology of steels. For manufacturers aiming to maintain cycle times and surface quality, this insert offers a technically sound compromise between wear resistance and toughness, supporting repeatable, economical machining operations. Contact Metav Werkzeuge for tailored application advice and to secure supply of Walter Tools ADMT180712R-D56 WKP35S milling inserts Technical data Article number: ADMT180712R-D56-WKP35S-WALTER Name: Fräswendeschneidplatte ADMT180712R-D56 WKP35S Walter Tools Manufacturer: Walter Tools Facts Insert size: 18 Thickness code: 07 Relief angle: 15° Corner radius: 1.2 mm Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: D56 Geometry: Parallelogram 85° Execution/type: T Material suitability: Steel (P) Material suitability: Cast iron (K) Base designation: ADMT180712R-D56 FAQ What materials is this insert suitable for? The ADMT180712R-D56 WKP35S milling insert from Walter Tools is designed for machining steel (P) and cast iron (K), combining chip control and wear resistance for these workpiece groups. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and improves thermal resistance, which extends the insert life and helps maintain surface finish under continuous milling. Which cutter geometry matches this insert? The parallelogram 85° form with a 15° relief is compatible with milling cutters designed for indexable parallelogram inserts; the ADMT180712R-D56 geometry is standard for such cutter bodies. What advantage does the R1.2 corner radius provide? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping during interrupted cuts, improving durability and consistency in component quality when using this insert. Is the chipbreaker suitable for heavy or finishing cuts? The D56 chipbreaker is engineered to balance chip fragmentation and evacuation, making it effective across a range of cutting depths; final selection should consider cutting parameters and workpiece characteristics. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered product is an original, brand-new item from the manufacturer Walter Tools.
ADMT180712R-D56 WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated Tiger·tec Gold grade and a versatile P/M/S material range to improve tool life and process stability; order directly via Metav Werkzeuge or request tailored application advice from the technical team. ADMT180712R-D56 WSP45G milling indexable insert — Tiger·tec Gold, 15° relief (Walter Tools) An ADMT180712R-D56 WSP45G insert engineered for robust milling of steel, stainless steel and heat‑resistant alloys in demanding production environments Tiger·tec Gold PVD coating Suitable for P / M / S materials Parallelogram 85° geometry 15° relief, 1.2 mm corner radius Higher productivity across mixed materials The combination of the Tiger·tec Gold coating and the WSP45G grade yields a PVD-coated carbide solution tailored for milling tasks where both toughness and wear resistance matter. This grade is optimised for the characteristic heat and chip formation of steels, the toughness of stainless steels and the thermal demands of superalloys and titanium. The result is a more consistent removal rate and reduced interruptive tool changes — benefits that translate directly into improved throughput and lower unit machining costs. Consistent surface quality with stable cutting edges Designed to support a stable cutting edge, the insert geometry and chipcontrol features reduce build‑up and improve surface finish even under high thermal load. The D56 chipbreaker promotes reliable chip evacuation while the 15° relief prevents rubbing at the flank, maintaining dimensional fidelity over longer tool lives. These technical choices lead to fewer rework cycles and a predictable surface quality across batches. Geometry and dimensions that enhance process security The parallelogram 85° form gives defined approach angles and secure seat location in compatible toolholders, increasing clamping stability and reducing vibration. The 1.2 mm corner radius contributes to edge strength where interrupted cuts or heavy depths of cut are present, while the plate thickness code 07 supports the stiffness required for industrial milling applications. Tolerance class M ensures repeatable interchangeability in multi‑tool setups. Practical application notes and selection guidance As a versatile milling insert for general and demanding operations, this plate is suitable for roughing and semi‑finishing passes where a balance of wear resistance and toughness is required. The P / M / S designation means the insert is explicitly intended for steel, stainless steel and heat‑resistant superalloys/titanium, making it a good single‑grade choice for mixed‑material production runs. If uncertain about cutting parameters or holder compatibility, consult Metav Werkzeuge’s application engineers for parameter windows and toolholder recommendations to ensure optimal performance. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange reliable supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ADMT180712R-D56-WSP45G-WALTER Designation: ADMT180712R-D56 WSP45G Type: milling indexable insert Manufacturer: Walter Tools Core dimensions Plate size: 18 Plate thickness: 07 Relief angle: 15° Corner radius: 1.2 mm Plate form angle: parallelogram 85° Materials & special features Series: Tiger·tec Gold Grade: WSP45G Grade class: PVD-coated carbide Material suitability: P / M / S Chipbreaker: D56 Tolerance class: M Version: T FAQ Which materials can this insert machine effectively? The ADMT180712R-D56 WSP45G insert is specified for P / M / S — suitable for steel, stainless steel and heat‑resistant superalloys/titanium, reflecting the versatile character of the Tiger·tec Gold grade. For which milling tasks is this grade best suited? WSP45G is a tough, versatile PVD grade intended primarily for milling operations that require a balance between wear resistance and edge stability, making it suitable for both roughing and semi‑finishing. What does the parallelogram 85° shape influence in practice? The parallelogram 85° geometry provides a defined cutting approach angle and secure seating in compatible toolholders, improving clamping stability and chip flow during interrupted or heavy cuts. How does the D56 chipbreaker contribute to machining? The D56 chipbreaker supports controlled chip formation and evacuation, which helps to maintain a stable cutting edge and consistent surface quality under varying cutting conditions. What does tolerance class M mean for tool fitting? Tolerance class M indicates a medium tolerance level, providing reliable interchangeability and repeatable positioning within multi‑tool assemblies and standard toolholders. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
ADMT180712R-F56 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKK25G grade for highly productive cast‑iron machining; the 15° relief and F56 chipbreaker give consistent chip control and extended edge life. Order the insert directly via Metav Werkzeuge or contact the team for technical advice. ADMT180712R-F56 WKK25G milling indexable insert — Tiger‑tec Gold, for cast‑iron machining (Walter Tools) A ADMT180712R-F56 WKK25G milling indexable insert designed to deliver productive and wear‑resistant performance in cast‑iron milling applications. Tiger‑tec Gold coated grade WKK25G Optimised for cast‑iron machining (ISO K) 15° relief angle for reliable cutting Parallelogram 85° shape, 1.2 mm corner radius High productivity for abrasive cast‑iron tasks The combination of the Tiger‑tec Gold coating and the WKK25G carbide grade is engineered for the specific demands of cast‑iron machining. The coating reduces abrasive wear while the substrate provides toughness against frequent, short‑breaking chips typical of cast materials. This results in consistent machining performance and predictable regrinding intervals, making the insert a pragmatic choice where process stability and uptime are priorities. The design reduces interruptions caused by premature edge failure and supports stable machining parameters across batch runs. Stable cutting edge and reproducible tool life A relief angle of 15° paired with a 1.2 mm corner radius promotes a strong cutting edge that withstands thermal and mechanical loads during face and profile milling. The geometry balances edge strength and cutting action to lower the risk of chipping while preserving surface quality. The F56 chipbreaker is optimised for fragmenting chips on cast‑iron, aiding evacuation and reducing the potential for re‑cutting that can shorten tool life. Together, these features provide improved process security and reduced tool change frequency in production environments. Integration benefits and handling efficiency in the toolroom The parallelogram 85° insert form offers a robust seating in standard milling holders and enables flexible cutting strategies with favourable approach angles for shoulder or face operations. The insert thickness and size align with common cutter bodies to simplify stocking and replacement. With a straightforward indexable design, the unit supports rapid reorientation and minimal downtime. The result is a practical tool choice that contributes to higher machine utilisation and easier logistical planning on the shop floor. Contact Metav Werkzeuge to request availability of the ADMT180712R‑F56 WKK25G Tiger‑tec Gold insert, obtain cutting data recommendations or arrange purchase directly through Metav Werkzeuge Product details SKU: ADMT180712R-F56-WKK25G-WALTER Designation: ADMT180712R-F56 WKK25G Brand: Walter Tools Series: Tiger‑tec Gold Core data Relief angle: 15° Corner radius: 1.2 mm Insert size: 18 mm Thickness: 07 Tolerance class: M Features / Applications Coating: Tiger‑tec Gold Grade: WKK25G (coated cemented carbide) Chipbreaker: F56 Shape: Parallelogram 85° Material suitability: Cast‑iron (ISO K) Execution: T FAQ What materials is this insert suitable for? The ADMT180712R‑F56 WKK25G insert is formulated for cast‑iron (ISO K) applications and is optimised to handle the abrasive wear and short, breaking chips typical of such materials. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WKK25G grade increases abrasion resistance and helps maintain a stable cutting edge, which extends usable tool life in cast‑iron milling operations. Will the F56 chipbreaker work for both roughing and finishing? The F56 chipbreaker is primarily designed for effective chip control in cast‑iron; it provides reliable fragmentation for productive roughing and can deliver acceptable surface quality in many finishing passes depending on cutting parameters. Can this insert be used in standard parallelogram toolholders? Yes, the parallelogram 85° form of the insert is compatible with common toolholder designs that accept this geometry, enabling straightforward integration into existing milling assemblies. Is the 1.2 mm corner radius suitable for heavy interrupted cuts? The 1.2 mm corner radius provides a robust edge profile that improves resistance to chipping during interrupted cuts, contributing to process stability under demanding conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT180712R-F56 WKP25S Wendeplatten - Walter Tools
Take advantage of a high-performance combination: the Tiger·tec Silver coating and the WKP25S grade deliver consistent edge life and reliable chip control in mixed production of steel and cast iron. The robust parallelogram 85° geometry and F56 chipbreaker support stable milling and predictable surface finish—order directly via Metav Werkzeuge or consult our technicians for process integration. ADMT180712R-F56 WKP25S — indexable milling insert, Tiger·tec Silver (Walter Tools) The ADMT180712R-F56 WKP25S is an indexable milling insert designed for productive milling of steel and cast iron, combining a Tiger·tec Silver coating with a controlled chipbreaker geometry. Tiger·tec Silver coating technology Grade WKP25S for steel and cast iron Parallelogram 85° geometry for versatile milling Effective chip control with F56 chipbreaker Precision and performance where material mix matters The combination of Tiger·tec Silver coating and the WKP25S carbide grade is engineered to meet the thermal and abrasive demands of machining both steel and cast iron. The coating reduces friction and supports stable cutting temperatures, which results in extended tool life and fewer tool changes during production. Thanks to the insert’s geometry, the machining process benefits from consistent chip control, reducing downtime caused by clogged coolant nozzles or damaged workpiece surfaces. Geometry that improves stability and surface quality The parallelogram 85° configuration delivers a secure seating and positive cutting engagement that helps maintain a steady cutting force. The combination of the insert’s relief angle and the 1.2 mm corner radius improves edge robustness during interrupted cuts and contour milling. This results in better surface integrity and fewer marks on finished components, which is particularly valuable in serial production environments where reproducibility is essential. Chip control and process predictability The F56 chipbreaker is tuned to produce short, controllable chips when cutting typical steels and cast irons, lowering the risk of entanglement and enabling more consistent machine cycle times. Improved chip formation also reduces heat concentration at the cutting edge, supporting a more predictable rate of wear. For operations seeking to optimise throughput, this behaviour translates to reliable component quality and fewer unscheduled tool changes. Practical integration and application guidance The insert’s designation and dimensions support straightforward toolholder selection and inventory management in standard milling fixtures. With a tolerance class M and the widespread compatibility implied by the ADMT180712R-F56 geometry, the component integrates into established tooling systems without complex adapter requirements. For users evaluating process parameters, Metav Werkzeuge can advise on cutting data tailored to the particular steel or cast iron grade used in production. Contact Metav Werkzeuge to discuss how the Walter Tools Tiger·tec Silver ADMT180712R-F56 WKP25S insert can be integrated into existing milling processes and to receive application-specific cutting data and stock information Technical data Article number (SKU): ADMT180712R-F56-WKP25S-WALTER Name: Fräswendeschneidplatte ADMT180712R-F56 WKP25S Walter Tools Series: Tiger-tec Silver Grade: WKP25S Manufacturer: Walter Tools Core technical data Insert size: 18 Thickness code: 07 Corner radius: 1.2 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Coating technology: Tiger·tec Silver Applicable for: Steel (P) and Cast iron (K) Carbide/grade: WKP25S (coated carbide) Designation: ADMT180712R-F56 FAQ What materials is this insert suitable for? The ADMT180712R-F56 WKP25S insert is specified for machining steel (P) and cast iron (K), using the WKP25S grade and Tiger·tec Silver coating to handle typical heat and abrasive wear patterns. How does the F56 chipbreaker help production? The F56 chipbreaker on this insert improves chip control and produces short, manageable chips when milling steel and cast iron, which enhances machine uptime and surface consistency. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating reduces friction at the cutting zone, supports stable cutting temperatures and extends the service life of the cutting edge during continuous milling cycles. Is the geometry suitable for interrupted cuts? Yes — the parallelogram 85° geometry combined with a 1.2 mm corner radius increases edge strength and stability, making the insert resilient for interrupted cuts and pocketing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT180712R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and the F56 chipbreaker to extend tool life and secure consistent chip control for steel and cast iron machining; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. ADMT180712R-F56 WKP35G indexable milling insert — for steel and cast iron | Walter Tools ADMT180712R-F56 WKP35G is an indexable milling insert designed for high-productivity operations in steel and cast iron, combining a wear-resistant Tiger‑tec Gold coating with a dedicated chipbreaker geometry. Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron Parallelogram 85° form for secure clamping 1.2 mm nose radius for reliable finish Higher productivity through optimised grade and coating The combination of the WKP35G cutting grade and the Tiger‑tec Gold coating delivers a measurable improvement in wear resistance and thermal stability during heavy-duty milling. The coated carbide composition is specifically configured for machining steel and cast iron, so the insert maintains cutting-edge stability during extended cycles. With the integrated F56 chipbreaker, chip formation is controlled to reduce re-cutting and minimise surface rework, resulting in fewer tool changes and more efficient spindle utilisation. Geometry that secures accuracy and repeatable surface quality A parallelogram 85° insert form provides a robust seating and predictable cutting vector, which improves clamping stability and repeatable results across series production. The relief geometry of 15° combined with a 1.2 mm nose radius delivers a balance between edge strength and surface finish, enabling reliable component tolerances while limiting vibration. The insert thickness and form factor support consistent mounting in standard milling holders, so machining runs remain steady and setup times are reduced. Versatile application scope and cost-conscious machining Designed for catalogue- and geometry-dependent use, this insert covers a broad range of common steels and cast irons under ISO 513 classifications, offering process security across mixed production batches. The grade’s abrasion resistance and the chipbreaker’s capability to handle short, brittle chips make the insert suitable for interrupted cuts and variable feed conditions, improving overall tool life and lowering per-part tooling costs. For manufacturers seeking predictable output and lower scrap rates, the geometry and coating together provide a cost-effective machining solution. Contact Metav Werkzeuge for tailored application support and to source genuine Walter Tools inserts like the ADMT180712R-F56 WKP35G through the local sales team. Technical data Article number: ADMT180712R-F56-WKP35G-WALTER SKU: ADMT180712R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT180712R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Facts Plate size: 18 mm Thickness: 7 mm Nose radius: 1.2 mm Relief angle: 15° Tolerance class: M Special features Chipbreaker: F56 Plate form: Parallelogram 85° Grade type: Coated carbide (Tiger‑tec Gold) Material suitability: steel (P), cast iron (K) Designation: ADMT180712R-F56 WKP35G FAQ What materials is this insert suited for? The ADMT180712R-F56 WKP35G insert is specified for steel (P) and cast iron (K) according to the grade capabilities of the WKP35G Tiger‑tec Gold series. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of chip-related interruptions when machining steel and cast iron. Is the parallelogram 85° form important for clamping? Yes, the parallelogram 85° form increases seating stability and repeatability in the tool holder, which contributes to consistent cutting performance and reduced fixture-related variation. What does the 1.2 mm nose radius provide? A 1.2 mm nose radius balances edge strength and surface finish, enabling both stable cutting conditions and good component surface quality in typical milling operations. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT180712R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for reliable chip control and extended tool life; the combination of stable geometry and proven chipbreaker design supports efficient milling of steel and cast iron. Order or request application guidance via Metav Werkzeuge for a seamless supply and technical consultation. ADMT180712R-F56 WKP35S milling indexable insert — 15° clearance, 1.2 mm corner radius | Walter Tools The ADMT180712R-F56 WKP35S is a parallelogram 85° milling insert designed for high-performance finishing and roughing in steel and cast iron applications Tiger·tec Silver coating technology Optimised for steel and cast iron 15° clearance angle for stable cutting 1.2 mm corner radius for extended edge life Higher productivity through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP35S cut-off grade provides a marked increase in process stability and tool life. The coated carbide substrate is engineered to withstand the thermal and mechanical loads typical of machining steel and cast iron, reducing wear rates and enabling longer cutting times between indexings. In practice, this results in fewer tool changes and improved uptime on milling operations, contributing directly to cost efficiency and predictable cycle times. Consistent chip control and geometry for dependable results A parallelogram 85° form paired with an F56 chipbreaker delivers controlled chip formation across a range of feed rates. The 15° clearance angle reduces rubbing and supports a clean cutting action, while the 1.2 mm corner radius enhances edge strength for interrupted cuts and strength-critical passes. These geometric choices translate into repeatable surface finishes and dimensional stability, helping maintain part tolerances even in mixed-production environments. Practical benefits for workshop and production settings The insert’s grade WKP35S has been tuned for balanced performance: economical yet robust enough for serial production. The designation P / K denotes suitability for steel (P) and cast iron (K), which simplifies tool selection where mixed materials are machined. The insert’s standard form factor and compatibility with common milling toolholders support quick replacement and minimal setup time, which favours medium- to high-volume machining and reduces operator intervention. Application guidance and efficiency considerations Selection of the correct feed and speed paired with the ADMT180712R-F56 geometry yields improved surface quality and predictable flank wear. The coated grade assists in chip flow and reduces built-up edge tendency, especially under varying cooling conditions. For customers assessing tool performance, the insert offers a pragmatic balance between wear resistance and toughness, making it a reliable choice for everyday production tasks where consistent output and minimal rework are priorities. For tailored cutting data or to secure supply of Walter Tools ADMT180712R-F56 WKP35S inserts, contact Metav Werkzeuge for expert application advice and fast provisioning. Technical data SKU: ADMT180712R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT180712R-F56 WKP35S Walter Tools Product type: milling indexable insert Grade: WKP35S Series: Tiger-tec Silver Chipbreaker: F56 Base designation: ADMT180712R-F56 Execution: T Tolerance class: M Material code: P / K Insert form: Parallelogram 85° Size: 18 Thickness code: 07 Corner radius: 1,2 Clearance angle: 15° Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 15° Corner radius: 1,2 mm Insert size: 18 Thickness code: 07 Tolerance class: M Special features / Versions Tiger·tec Silver coating Grade WKP35S (coated carbide) F56 chipbreaker Parallelogram 85° insert form Suitable for steel (P) and cast iron (K) Series: Tiger-tec Silver Manufacturer: Walter Tools FAQ What materials is this insert suited for? The ADMT180712R-F56 WKP35S is specified for machining steel (P) and cast iron (K), with the WKP35S grade optimised for these material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating reduces abrasive and adhesive wear, improving edge life and enabling more consistent performance when milling steels and cast irons with the ADMT180712R-F56. Which chipbreaker is fitted to this insert and why does it matter? This insert uses an F56 chipbreaker, designed to control chip form and evacuation, which contributes to stable cutting conditions and reliable surface quality. What geometric advantages does the parallelogram 85° shape provide? The parallelogram 85° form allows secure seating in milling cutters and supports positive cutting angles for a balance of strength and accessibility in shoulder and face milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, brand-new product from the manufacturer (Walter Tools).
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com