ADMT160608R-D56 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the wear-resistant WKK25G grade and an optimised D56 chipbreaker for predictable machining of cast iron; order directly via Metav Werkzeuge or request advice from the technical team to integrate the insert into existing processes. ADMT160608R-D56 WKK25G — Fräswendeschneidplatte (for cast iron) by Walter Tools — Tiger·tec Gold, D56 chipbreaker ADMT160608R-D56 WKK25G is a parallelogram milling insert designed for productive machining of abrasive cast iron components, combining a Tiger·tec Gold coating and a dedicated chip control geometry. Tiger·tec Gold coating for abrasive cast iron D56 chipbreaker for controlled short chips Parallelogram 85° form for versatile entry 0.8 corner radius for stable edge and finish Reliable performance on abrasive cast iron The WKK25G grade, applied within the Tiger·tec Gold coating family, is tailored to withstand the abrasive wear typical of cast iron. This results in a stable cutting edge and consistent flank wear behaviour, which reduces unexpected tool changes and improves uptime. The dedicated D56 chipbreaker promotes short, controllable chips when machining brittle, abrasive materials; this aids evacuaton and lowers the risk of surface damage. For production environments that prioritise throughput and repeatability, the coated carbide chemistry and chip control combine to enhance process stability and reduce overall machining cost per part. Geometry and design that improve accessibility and repeatability The insert’s parallelogram 85° form and designated 15° free angle provide a balanced contact geometry that eases entry into complex profiles and offers reliable indexability in standard toolholders. A defined 0.8 corner radius provides a compromise between edge strength and achievable surface finish: larger radii increase tool life and dampen vibrations, while still supporting good surface quality on cast components. The coded dimensions (size 16, thickness 06) ensure consistent seating and repeatable clamping, which simplifies fixture setup and contributes to predictable dimensional results across batches. Stable cutting behaviour for economical milling Coating technology from the Tiger·tec Gold series provides improved resistance to abrasive wear and maintains a sharp, stable cutting edge under intermittent cutting conditions often found when machining cast iron. The result is fewer index changes and longer intervals between insert replacements, which translates into lower tooling consumption and less machine downtime. Together with the specific chipbreaker and robust geometry, the insert supports efficient cycle times and a reliable surface integrity that helps meet quality targets with fewer interventions. Process documentation and application data from Metav Werkzeuge can be consulted to align speeds and feeds with machine and workpiece specifics. Consult Metav Werkzeuge for integration advice and application support for Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss process parameters and availability Technical data Article number: ADMT160608R-D56-WKK25G-WALTER SKU: ADMT160608R-D56-WKK25G-WALTER Product label: Fräswendeschneidplatte ADMT160608R-D56 WKK25G Walter Tools Facts Plate size: 16 Plate thickness: 06 Corner radius: 0.8 Free angle: 15° Chipbreaker: D56 Special features Series: Tiger·tec Gold Grade: WKK25G Shape: Parallelogramm 85° Application: cast iron Ausführung: T Tolerance class: M FAQ What materials is this insert designed for? The ADMT160608R-D56 WKK25G insert from Walter Tools is formulated for machining cast iron, with the WKK25G grade and Tiger·tec Gold coating optimised for abrasive, brittle materials. How does the D56 chipbreaker affect machining of cast iron? The D56 chipbreaker produces short, controlled chips when milling cast iron, improving chip evacuation and minimising the risk of surface damage while supporting stable cycle times with the Walter Tools insert. What does the 85° parallelogram form offer in practice? An 85° parallelogram geometry provides versatile entry angles and good accessibility for pockets and contours; it also ensures reliable seating and repeatable insert positioning in compatible toolholders. Can the insert improve process economics? Yes — the combination of Tiger·tec Gold coating and the WKK25G grade extends tool life in abrasive cast iron, reducing insert changes and contributing to lower tooling costs and higher machine utilisation. Manufacturer: Walter Tools; part of Walter AG, Tübingen, Germany The Walter AG (brand: Walter Tools) with its headquarters in Tübingen belongs to the Sandvik Group and is recognised for precision tooling. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADMT160608R-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for durable, productive milling of steel and cast iron; the robust D56 chipbreaker and 0.8 mm corner radius ensure controlled chips and consistent surface quality — order availability and application advice via Metav Werkzeuge. ADMT160608R-D56 WKP25S Fräswendeschneidplatte (Tiger‑tec Silver) – for steel and cast iron | Walter Tools The ADMT160608R-D56 WKP25S is a coated carbide milling insert intended for versatile milling of unalloyed and alloyed steels as well as cast iron, offering high wear resistance and reliable chip control. Tiger‑tec Silver coated grade WKP25S Parallelogram 85° insert shape 15° relief angle for stable cutting 0.8 mm corner radius for edge strength Engineered for steady, high‑productivity milling The coated carbide grade WKP25S (Tiger‑tec Silver) is formulated for productive machining of steel and cast iron. With its D56 chipbreaker the insert provides consistent chip control, which reduces downtime from chip-related issues and supports stable cutting conditions. The parallelogram 85° geometry distributes cutting forces evenly and is conducive to secure clamping in standard milling holders. Because the grade is optimised for materials in the P and K groups of ISO 513, process parameters are better preserved and tool life is extended, helping to maintain throughput in production environments. Improved edge stability and surface consistency A 15° relief angle combined with a 0.8 mm corner radius delivers a balance between edge strength and accessible cutting action. This combination reduces the likelihood of premature edge chipping under interrupted cuts and supports a predictable wear pattern during extended runs. For workshop planners and process engineers, the result is a more consistent surface finish and fewer unscheduled tool changes; these operational advantages translate into measurable improvements in component quality and machining uptime. Practical application and process support The insert's dimensions (plate size 16, thickness 06) and its geometry make it suitable for a wide range of milling operations where robust performance is required. The coated grade is intended to handle the heat and abrasive wear typical of steel and the short, breaking chips often encountered with cast iron. Indexable insert handling is straightforward: the design is compatible with common parallelogram toolholders, enabling quick replacement and reduced fixture time. For shops seeking reproducible performance across batches, the combination of Tiger‑tec Silver coating and WKP25S composition offers a reliable basis for setting stable process windows. Contact Metav Werkzeuge for availability and personalised application advice on Walter Tools inserts — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss the ADMT160608R-D56 WKP25S for specific machining tasks Technical data SKU: ADMT160608R-D56-WKP25S-WALTER Article designation: ADMT160608R-D56 WKP25S Product type: Fräswendeschneidplatte Series: Tiger‑tec Silver Facts Plate size: 16 mm Thickness: 06 Relief angle: 15° Corner radius: 0.8 mm Tolerance class: M Features Grade/coating: WKP25S, Tiger‑tec Silver Chipbreaker: D56 Plate shape: Parallelogram 85° Material groups: P / K (steel, cast iron) Execution: T Manufacturer: Walter Tools FAQ What materials can be machined with this insert? The ADMT160608R-D56 WKP25S insert is designed for machining materials in ISO groups P and K, specifically a range of steels and cast irons. How does the Tiger‑tec Silver coating benefit the machining process? The Tiger‑tec Silver coating on the WKP25S grade improves wear resistance and thermal stability, which helps to extend tool life and maintain a consistent cutting edge during steel and cast‑iron machining. What is the purpose of the D56 chipbreaker? The D56 chipbreaker is engineered to produce controllable chip forms in both steel and cast iron, reducing the risk of chip entanglement and contributing to process reliability. Is the parallelogram 85° shape suitable for common milling holders? Yes, the parallelogram 85° geometry is compatible with standard toolholders that accept this insert form, enabling secure clamping and straightforward replacement. What cutting conditions suit this insert best? Cutting conditions depend on workpiece material and machine capability; the WKP25S grade is optimised for the thermal and abrasive characteristics of steels and cast irons, promoting stable performance under typical milling feeds and speeds. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
ADMT160608R-D56 WKP35G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and the D56 chipbreaker delivers a productive balance of process security and tool life; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. ADMT160608R-D56 WKP35G – Fräswendeschneidplatte, Tiger‑tec Gold coating, D56 chipbreaker (Walter Tools) The ADMT160608R-D56 WKP35G is a coated carbide milling insert optimised for productive machining of steel and cast iron, combining a robust chip control geometry with a wear-resistant grade. Tiger‑tec Gold coated carbide Optimised for steel and cast iron D56 chipbreaker for stable chip control 15° relief angle, 0.8 mm corner radius Higher throughput through coating and geometry The combination of the Tiger‑tec Gold coating and the WKP35G carbide grade results in consistently high cutting performance, especially in interrupted cuts and mixed production runs. The coating reduces abrasive wear and improves thermal resistance, which increases time between indexings and lowers unit machining costs. The D56 chipbreaker is designed to create short, controllable chips when turning common ISO group P and K materials, improving tool stability and reducing cycle-time variability. This leads to measurable productivity benefits in both batch and single‑piece production environments. Reliable edge life and process stability The insert’s geometry—a parallelogram 85° shape with a 0.8 mm corner radius and a 15° relief angle—supports a stable cutting edge that withstands variable cutting forces. These features, together with the coated carbide grade, deliver improved wear resistance and repeatable performance across runs. In practice, this means fewer unplanned tool changes and more predictable component quality, which supports leaner process planning and higher first‑pass yield on steel and cast‑iron components. Practical compatibility and handling advantages Designed for standard milling toolholders that accept the ADMT form, the insert’s size 16 and thickness code 06 fit common modular tool systems and allow straightforward tool assembly. The WKP35G grade targets the ISO material groups P (steel) and K (cast iron), ensuring appropriate mechanical and thermal behaviour for these substrates. The nominal tolerance class M supports repeatable positioning and secure clamping, which helps maintain dimensional accuracy across tool changes and regrinds. What the grade and chipbreaker mean for production The grade name indicates a coated cemented carbide formulation optimised for general‑purpose machining in steel and cast iron. The D56 chipbreaker is engineered to break chips reliably under typical cutting parameters for these materials; this reduces the need for manual chip handling and improves machine uptime. For customers transitioning between workpiece types, the insert offers a balance of toughness and wear resistance that minimises the need for multiple specialised grades, simplifying tool inventory. For tailored application advice or to reserve Walter Tools inserts from stock, contact Metav Werkzeuge for precise recommendations and prompt supply. Technical data Article number: ADMT160608R-D56-WKP35G-WALTER Name: Fräswendeschneidplatte ADMT160608R-D56 WKP35G Walter Tools Manufacturer: Walter Tools Type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WKP35G Core dimensions Free angle: 15° Corner radius: 0.8 mm Plate size: 16 Thickness code: 06 Tolerance class: M Plate form: Parallelogram 85° Special features Coating: Tiger·tec Gold Material: P / K Chipbreaker: D56 Execution: T Suitable for: Steel; Cast iron Designation: ADMT160608R-D56 WKP35G FAQ What materials is this insert designed for? The ADMT160608R-D56 WKP35G is specified for ISO groups P (steel) and K (cast iron), with the coating and grade tuned to handle typical heat and chip formation in these materials. How does the D56 chipbreaker affect machining? The D56 chipbreaker produces short, consistent chips under typical cutting parameters for steel and cast iron, improving machine cleanliness and reducing interruptions caused by long chips. Is the insert suitable for interrupted cuts? Yes, the coated carbide grade and the insert geometry provide toughness and thermal resistance that enhance performance in interrupted and mixed cutting conditions. What does the 0.8 mm corner radius influence? A 0.8 mm corner radius balances edge strength and surface finish; it increases edge durability while maintaining acceptable surface integrity on most steel and cast‑iron components. Which toolholders accept this insert form? The insert uses the ADMT form and fits holders and cutter bodies designed for that indexable geometry; confirmation of holder compatibility is recommended before assembly. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.*
ADMT160608R-D56 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of a wear‑resistant Tiger‑tec Silver grade and a geometry engineered for reliable chip control to boost productivity and reduce tool costs. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. ADMT160608R-D56 WKP35S indexable milling insert — Tiger‑tec Silver, for steel and cast iron, Walter Tools The ADMT160608R-D56 WKP35S is an indexable milling insert designed for robust face and shoulder milling in mixed production environments, offering high process security for steel (P) and cast‑iron (K) applications. *Tiger‑tec Silver coated carbide grade WKP35S *Parallelogram 85° geometry for versatile milling *0.8 mm corner radius for stable edge strength *Optimised chipformer D56 for steel and cast iron Increase throughput with durable coated carbide The Tiger‑tec Silver coating combined with the WKP35S grade delivers a balance of wear resistance and thermal stability that translates into longer tool life and fewer index changes per shift. Coated carbide reduces flank and crater wear under typical steel and cast‑iron cutting conditions, enabling higher cutting speeds and sustained productivity. For operations seeking lower cost per component, the coated grade supports extended life without sacrificing surface quality. Reliable chip control for consistent part quality The chipformer D56 is engineered to break and evacuate chips efficiently, reducing the risk of chip re‑cutting and heat build‑up. Paired with the parallelogram 85° geometry and a 15° relief, the insert promotes controlled cutting forces and stable engagement during interrupted cuts. The result is improved dimensional repeatability and fewer rejects when machining shoulder faces or stepped features. Versatility across steel and cast‑iron machining Specified for material groups P (steel) and K (cast iron), this grade suits workshops that handle a variety of ferrous components. The substrate and coating combination is optimised for the heat generation and abrasive wear typical of these materials, offering predictable performance across different steel grades and grey or nodular cast iron. This versatility simplifies tooling management for mixed production lines. Process security and practical geometry benefits With a 0.8 mm corner radius and a tolerance class of M, the insert provides robust edge strength while maintaining acceptable surface finish for typical finishing and semi‑finishing operations. The insert size 16 and thickness 06 allow integration into common milling cutter bodies designed for parallelogram‑style inserts, so retrofitting into existing tool systems is straightforward and keeps setup times low. These features support stable tool life and reproducible results in series production. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger‑tec Silver inserts and application recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADMT160608R-D56-WKP35S-WALTER Article: ADMT160608R-D56 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 16 Thickness: 06 Relief angle: 15° Corner radius: 0.8 mm Geometry: Parallelogram 85° Tolerance class: M Special features Coating / grade: WKP35S (coated carbide) Chipformer: D56 Material suitability: Steel (P) and Cast iron (K) Execution: T Series description: Tiger‑tec Silver FAQ What materials is this insert suitable for? The ADMT160608R-D56 WKP35S indexable milling insert from Walter Tools is specified for machining steel (P) and cast iron (K) according to the ISO material group designations. How does the Tiger‑tec Silver coating benefit the machining process? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, extending tool life and allowing higher cutting parameters for improved productivity. What role does the chipformer D56 play in performance? The chipformer D56 controls chip shape and evacuation to avoid re‑cutting and heat concentration, supporting consistent surface finish and process reliability in interrupted‑cut operations. Which cutter geometry does the insert offer and what is the advantage? The parallelogram 85° form with a 15° relief delivers flexible entry angles and stable cutting forces, making the insert suitable for versatile face and shoulder milling tasks. Is the insert recommended for stainless steel? Suitability for stainless steel is not specified in the provided data; the ADMT160608R-D56 WKP35S is described for steel and cast iron applications. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory‑new merchandise of Walter Tools.
ADMT160608R-D56 WSP45G T Wendeplatten - Walter Tools
The combination of a wear-resistant Tiger·tec Gold grade and a precise D56 chipbreaker delivers stable cutting edges and predictable chip control for demanding milling tasks. Order the ADMT160608R-D56 WSP45G insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT160608R-D56 WSP45G — Parallelogram 85° milling insert, 15° clearance, Walter Tools ADMT160608R-D56 WSP45G is a coated carbide indexable insert for versatile milling applications in steel, stainless steel and heat-resistant alloys Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° insert geometry 15° clearance; 0.8 mm corner radius Consistent wear performance for uninterrupted production The Tiger·tec Gold technology used in this grade combines a PVD-based coating with a robust substrate to provide improved wear resistance and longer tool life. With the ADMT160608R-D56 WSP45G insert, the PVD-coated carbide surface reduces abrasive and adhesive wear, which in turn keeps the cutting edge sharper for more consistent part quality over longer cycles. The built-in chipbreaker D56 promotes controlled chip formation, lowering the risk of surface damage and enabling more reliable unattended runs. Confidence when machining demanding workpiece families This insert is specified for the ISO groups P, M and S, which means it is engineered to machine a broad range of materials: unalloyed and alloyed steel, stainless steels and heat-resistant superalloys or titanium grades. The WSP45G grade offers a balance of toughness and heat resistance, helping to avoid premature chipping when cutting tough, adhesive materials and reducing the likelihood of built-up edge. The result is improved process security and repeatable surface finishes even on challenging batches. Geometry that increases process reliability and part accuracy The parallelogram 85° geometry reduces interference in shoulder and face milling while giving stable engagement for a variety of axial and radial depths of cut. The specified 15° clearance angle lowers flank contact, reducing rubbing and thermal load on the tool, and the 0.8 mm corner radius gives a favourable compromise between edge strength and the achievable surface finish. These geometric choices work together to increase feed rates and maintain dimensional consistency across production runs. Easy integration into existing milling systems and workflows With a tolerance class M and the standardised ADMT form factor, the insert fits common Walter Tools toolholders and clamping systems for milling. The coded thickness and size identifiers simplify replacement and inventory management. For best results, correlate the insert’s chipbreaker and grade to cutting parameters for the specific material; process data sheets are available and technical advice can be provided by Metav Werkzeuge to adapt cutting speed and feed for maximum productivity. For application consulting, cutting data or to place an order for Walter Tools ADMT160608R-D56 WSP45G inserts, contact Metav Werkzeuge for tailored support and fast delivery options. Technical data Article number: ADMT160608R-D56-WSP45G-WALTER Product name: ADMT160608R-D56 WSP45G Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Numbers / core technical data Size: 16 mm Thickness: 06 Corner radius: 0.8 mm Clearance angle: 15° Insert form: Parallelogram 85° Chipbreaker: D56 Tolerance class: M Designs / special features Grade: WSP45G Coated carbide (PVD), described as coated hardmetal Material suitability: steel (P), stainless steel (M), superalloys/titanium (S) Execution: T FAQ What materials can this insert machine effectively? The ADMT160608R-D56 WSP45G insert is intended for a wide material range and is suitable for steel, stainless steels and heat-resistant superalloys, reflecting the ISO groups P, M and S described for this grade. How does the D56 chipbreaker affect machining? The chipbreaker D56 is designed to produce predictable chip forms and assist evacuation during milling; with the WSP45G grade it supports consistent surface quality and reduces the risk of chip-related interruptions. Is this insert compatible with standard Walter toolholders? The ADMT form and tolerance class M match common Walter Tools holders and clamping systems; compatibility with specific holders should be checked against the holder catalogue and clamping data. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength compared with smaller radii, improving resistance to chipping while still producing acceptable surface finishes for many milling operations. How should cutting data be selected for this grade? Cutting parameters should be chosen according to the workpiece material and the machine’s rigidity; Metav Werkzeuge can provide recommended speeds and feeds tailored to the machine, holder and application. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160608R-F56 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp WAK15 uncoated carbide grade, precise F56 chip control and a 15° clearance for efficient machining of aluminium and other non‑ferrous materials; order this insert directly via Metav Werkzeuge or consult the team for application advice. ADMT160608R-F56 WAK15 — Fräswendeschneidplatte (for aluminium & non‑ferrous metals) by Walter Tools The ADMT160608R-F56 WAK15 is a parallelogram indexable milling insert engineered for high‑quality machining of aluminium and other non‑ferrous metals, combining a sharp geometry with secure chip control. Uncoated carbide grade WAK15 for non‑ferrous metals F56 chipbreaker for consistent chip control 15° clearance angle for sharp cutting action Parallelogram 85° form with 0.8 mm radius Consistent performance where non‑ferrous precision matters The Walter N‑series carbide grade WAK15 is an uncoated carbide developed specifically for machining aluminium and other non‑ferrous alloys. The combination of a very sharp cutting edge and the dedicated F56 chipbreaker reduces material adhesion and prevents built‑up edge, which translates directly into stable surface finish and longer tool life in serial production. For workshops transitioning from general‑purpose inserts, this geometry provides a measurable improvement in cycle stability without complex process changes. Improved productivity through controlled chip formation A reliable chip evacuation strategy is essential when working with soft, ductile materials. The F56 chipbreaker on this insert shapes chips to avoid tangling and ensures predictable removal, reducing machine downtime for clearing and lowering the risk of workpiece rework. Coupled with the 15° clearance, the insert delivers a low cutting force and clean shearing action, which permits higher feed rates and shorter cycle times on finishing and semi‑finishing passes. Geometry and dimensions that simplify integration The insert's parallelogram 85° form and 0.8 mm corner radius are compatible with common milling cutters that accept ADMT‑style inserts, allowing straightforward retrofitting. With a 16 mm inscribed circle and a 6 mm thickness, the robust body supports stable clamping and repeatable results across multiple tool pockets. This geometry is particularly well suited for productions where part consistency and repeatability are required, while the moderate corner radius balances edge strength and surface quality. Practical guidance for application and process choice When selecting cutting data for this grade, favour moderate cutting speeds and increased feed per tooth compared with treatments for steel; the WAK15 grade benefits from sharper edges and lower cutting temperatures typical of non‑ferrous machining. Where surface finish is critical, the combination of the F56 chipbreaker and the sharp geometry reduces the need for additional finishing passes. For less experienced teams, a short trial on a representative workpiece will clarify optimal feed and speed windows before full production. Contact Metav Werkzeuge for tailored setup recommendations for Walter Tools inserts and to check compatibility with existing cutters and toolholders Technical data Article number: ADMT160608R-F56-WAK15-WALTER Product designation: ADMT160608R-F56 WAK15 Type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 Chipbreaker: F56 Shape: Parallelogramm 85° Execution: T Material code: N Tolerance class: M Numbers / Core technical data Inscribed circle / size: 16 mm Thickness: 6 mm Corner radius: 0.8 mm Clearance angle: 15° SKU: ADMT160608R-F56-WAK15-WALTER Special features / Versions Uncoated carbide grade for non‑ferrous metals Optimised for aluminium and NE‑metals Part of the Walter N‑sortensystem Suitable for machining aluminium and Messing Designed for predictable chip formation and stable cutting FAQ Which materials is this insert intended for? The ADMT160608R‑F56 WAK15 insert is intended primarily for aluminium and other non‑ferrous metals, the WAK15 grade being optimised for these materials. Is the insert coated or uncoated? This grade is uncoated carbide (WAK15), designed to provide a very sharp cutting edge and low adhesion when machining soft metals. What is the corner radius and how does it affect finish? The insert has a 0.8 mm corner radius; this radius offers a compromise between edge strength and surface finish, suitable for general finishing and semi‑finishing passes. Can the insert be used in existing ADMT toolholders? The ADMT160608R‑F56 form and size conform to standard ADMT‑type toolholders; compatibility should be confirmed against the toolholder specification before assembly. What benefits does the F56 chipbreaker provide? The F56 chipbreaker shapes chips to avoid clogging and ensures consistent evacuation, improving process reliability and reducing interruptions during production. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT160608R-F56 WKK25G WKK25G Wendeplatten - Walter Tools
High process security and stable chip formation from the Tiger·tec Gold grade enable consistently productive machining of abrasive cast iron; the combination of the WKK25G substrate and the F56 chipbreaker extends tool life and improves surface finish. Order the ADMT160608R-F56 WKK25G milling indexable insert directly via Metav Werkzeuge or ask the consultants if needed. ADMT160608R-F56 WKK25G milling indexable insert – Tiger·tec Gold, F56 chipbreaker (for cast iron) by Walter Tools A ADMT160608R-F56 WKK25G milling indexable insert engineered for efficient, repeatable cast iron machining with a Tiger·tec Gold coating and a parallelogram 85° geometry. Tiger·tec Gold coated grade WKK25G Optimised for cast iron machining F56 chipbreaker for controlled chips 15° relief angle, 0.8 mm corner radius Reliable productivity for abrasive cast iron machining The insert provides a robust solution for demanding cast iron operations: the WKK25G grade, part of the Tiger·tec Gold family, is a coated carbide substrate formulated to resist abrasive wear typical of cast components. With a focus on measurable productivity gains, the geometry and coating together reduce flank wear and promote stable chip formation, which leads to longer tool life and fewer index changes. This results in fewer interruptions and more consistent throughput on milling machines. Precision geometry that improves process stability The parallelogram 85° shape combined with a 15° relief angle and 0.8 mm corner radius provides a balance between cutting edge strength and cutting action. The F56 chipbreaker is designed to control short, brittle chips commonly produced from cast iron, reducing the risk of re-cutting and improving surface integrity. Operators benefit from predictable tool behaviour and a reduced need for downstream rework, while planners gain clearer cycle-time estimates. Coating and grade benefits for longer service life Tiger·tec Gold technology contributes to wear resistance and temperature stability at the cutting edge. The coated carbide construction of the grade is tailored for the abrasive nature of cast iron (ISO group K), offering a compromise between toughness and hardness that reduces breakage and maintains edge quality. Applied in situations with frequent interrupted cuts, this combination supports repeatable performance and helps to maintain a consistent surface finish across batches. Practical application and workpiece considerations This indexable insert suits milling operations where cast iron components demand both productivity and cost-effective tool performance. The ADMT160608R-F56 WKK25G is primarily intended for Gusseisen (cast iron) applications and performs well under common interrupted-cut scenarios. Toolroom staff and process engineers will find the insert appropriate for stable roughing and finishing passes where controlled chip evacuation and edge life are priorities. For tailored advice on integrating the Tiger·tec Gold WKK25G insert into existing processes and for availability, contact Metav Werkzeuge for application support and reliable supply. Technical Data Article number: ADMT160608R-F56-WKK25G-WALTER Product: Milling indexable insert Grade: WKK25G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Size: 16 Thickness: 06 Shape: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger·tec Gold Substrate: coated carbide Application: Cast iron (K) Geometry: parallelogram 85° Designation: ADMT160608R-F56 Execution: T FAQ Is this insert suitable for cast iron components? Yes. The ADMT160608R-F56 WKK25G insert is specifically formulated for cast iron (ISO group K) and offers abrasion resistance and chip control optimised for these materials. What coating and grade does the insert use? The insert features the Tiger·tec Gold coating and the WKK25G grade, a coated carbide designed to improve wear resistance and maintain cutting-edge stability. Which chipbreaker and geometry are provided? This insert uses the F56 chipbreaker and a parallelogram 85° shape with a 15° relief angle to promote controlled chips and consistent cutting behaviour. What are the key dimensional values to consider? Relevant technical values include a size of 16, a thickness indicated as 06, and a corner radius of 0.8 mm, which together influence cutting forces and application suitability. Can this insert handle interrupted cuts and roughing operations? Yes. The combination of grade, coating and geometry supports interrupted cutting typical in milling cast iron, offering a stable edge and controlled chip formation for roughing and certain finishing passes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160608R-F56 WKP25S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating and the WKP25S grade provides extended tool life and consistent edge stability for demanding milling tasks; paired with the parallelogram 85° geometry and F56 chipbreaker, this insert delivers reliable chip control and secure seating in robust fixtures. Order the ADMT160608R-F56 WKP25S milling insert directly via Metav Werkzeuge or ask the consultants for application support. ADMT160608R-F56 WKP25S — Milling indexable insert, Tiger·tec Silver, Walter Tools ADMT160608R-F56 WKP25S is a parallelogram-shaped milling insert designed for productive machining of steel and cast iron. Tiger·tec Silver coated carbide for wear resistance Suitable for P (steel) and K (cast iron) applications Parallelogram 85° geometry for secure clamping 15° clearance and 0.8 mm corner radius for surface quality Longer tool life through advanced coating technology The Tiger·tec Silver surface treatment used on the WKP25S grade is a multilayer coating applied to a coated carbide substrate, engineered to reduce abrasive wear and to withstand the thermal loads typical in steel machining. This results in fewer tool changes and a higher productive cutting time per insert, which improves overall process economy. In practical terms, the coating supports constant cutting-edge stability during interrupted cuts and variable depths of cut, translating into predictable tool performance and fewer unexpected stoppages. Geometry and chip control that stabilise the process The parallelogram 85° form combined with the F56 chipbreaker is designed to promote consistent chip formation and evacuation when machining both unalloyed and alloyed steels as well as cast iron. The defined 15° clearance minimises rubbing behind the cutting edge while the 0.8 mm corner radius contributes to a sturdy edge that resists chipping under heavy feed. These geometric choices mean improved surface finish and enhanced tool life, particularly in operations requiring interrupted engagement or variable cut depths. Application range and process reliability Designed for ISO groups P (steel) and K (cast iron), this insert supports a wide spectrum of workshop and production duties where robust, repeatable results are required. The WKP25S grade provides a balance between wear resistance and edge toughness, making it suitable for conventional and semi-finishing passes. The tolerance class M indicates dimensional consistency suitable for indexed toolholders, enabling rapid re-indexing and reduced setup times—key factors for throughput-focused environments. Practical handling and integration benefits The insert’s designation and format facilitate straightforward integration into existing milling systems that accept parallelogram inserts of this geometry. The plate size and thickness coding ensure compatibility with standard clamping systems, and the marked chipbreaker reduces the need for trial-and-error parameter tuning when switching materials between steel and cast iron. For production planners and toolroom staff, these characteristics contribute to predictable process windows and simplify inventory decisions for mixed-material production. For high-productivity milling with Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: ADMT160608R-F56-WKP25S-WALTER Label: Fräswendeschneidplatte ADMT160608R-F56 WKP25S Walter Tools Product type: Milling indexable insert Series: Tiger·tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 16 Plate thickness code: 06 Chipbreaker: F56 Tolerance class: M Special features Coated carbide (multilayer coating) Suitable for P (steel) applications Suitable for K (cast iron) applications Parallelogram 85° geometry Robust edge for interrupted cuts FAQ What materials is this insert suited for? The ADMT160608R-F56 WKP25S insert (Walter Tools milling indexable insert) is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WKP25S grade increases wear resistance and thermal stability, which extends tool life and improves cutting-edge reliability during steel and cast-iron milling operations. What is the benefit of the parallelogram 85° shape? The parallelogram 85° geometry provides a secure clamping interface and optimised cutting-wedge exposure, supporting stable cutting forces and consistent chip flow for the ADMT160608R-F56 WKP25S insert. Can the insert be used for finishing passes? Yes, with its 0.8 mm corner radius and defined clearance angle, the insert offers sufficient edge strength and surface quality for finish and semi-finish milling in the applicable materials. What does the tolerance class M imply for toolholders? Tolerance class M indicates dimensional consistency that supports predictable seating and repeatable indexing in compatible toolholders, reducing setup variability for series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The item offered is original and brand-new from the manufacturer, Walter Tools.
ADMT160608R-F56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WKP35G grade delivers extended tool life and reliable chip control in steel and cast-iron milling operations; benefit from stable edge condition and consistent results. Order via Metav Werkzeuge or consult their specialists for application-matched selection and delivery. ADMT160608R-F56 WKP35G milling insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) ADMT160608R-F56 WKP35G is a precision milling insert developed for productive roughing and finishing in steel and cast iron applications, combining a Tiger·tec Gold coating with a dedicated F56 chipbreaker and parallelogram 85° geometry Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron Parallelogram 85° geometry for flexible milling 15° clearance and 0.8 mm corner radius High productivity through advanced coating and grade The Tiger·tec Gold surface technology paired with the WKP35G cemented-carbide grade provides a direct improvement in process stability and tool life. The coated carbide construction reduces abrasive wear and improves thermal resistance during prolonged cutting, which translates into fewer insert changes and higher uptime. Specified as a coated hardmetal grade, this configuration is especially effective for the thermal load and chip forms typical of steel and cast-iron machining, resulting in a measurable increase in productivity and lower cost per component. Predictable chip control and machining quality Equipped with the F56 chipbreaker and a parallelogram 85° insert shape, the geometry is tailored for controlled chip formation and reliable evacuation in a range of milling strategies. The moderate corner radius (0.8 mm) and 15° clearance angle contribute to a balance between edge strength and fine surface quality; this supports stable cutting at practical feeds and speeds. According to ISO classification, suitability for P (steel) and K (cast iron) materials ensures the insert performs across common workshop tasks, delivering repeatable surface finish and reduced rework. Robust fitment and consistent process results Design aspects such as the tolerance class M, the execution code T, and the standard insert format guarantee secure clamping and repeatable positioning in indexable milling cutters. These mechanical characteristics support a stable cutting edge during interrupted cuts and high-load conditions, which helps maintain dimensional accuracy across batches. Backed by Walter Tools' manufacturing standards, the insert offers consistent edge geometry and predictable wear behaviour, aiding planning for tool-change intervals and process optimisation. For application-specific advice or to order ADMT160608R-F56 WKP35G inserts from Walter Tools, contact Metav Werkzeuge for technical support and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT160608R-F56-WKP35G-WALTER Designation: ADMT160608R-F56 WKP35G Product type: Milling insert Manufacturer: Walter Tools Core data Corner radius: 0.8 mm Clearance angle: 15° Insert size: 16 mm Thickness: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade/sort: WKP35G (coated cemented carbide) Chipbreaker: F56 Insert shape: Parallelogram 85° Material applicability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suitable for? The ADMT160608R-F56 WKP35G insert is specified for steel (P) and cast iron (K) applications and is optimised via the Tiger·tec Gold coating for those material groups. How does the F56 chipbreaker affect machining? The F56 chipbreaker offers controlled chip formation for a range of feeds, improving evacuation and reducing recutting, which leads to more consistent surface quality with the ADMT160608R-F56 WKP35G insert. What are the key geometry benefits of the parallelogram 85° shape? The parallelogram 85° form provides flexibility in milling orientations and stable cutting engagement, helping to maintain edge strength and deliver predictable tool life under varying cutting conditions. Which features support longer tool life and process security? The combination of the Tiger·tec Gold coating, the WKP35G grade and a robust corner radius contributes to abrasion resistance, thermal stability and reliable edge retention for extended intervals between changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen and product names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer Walter Tools.
ADMT160608R-F56 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S grade for long tool life and reliable chip control in demanding production environments. The parallelogram 85° geometry and 0.8 mm corner radius deliver stable cutting and consistent surface quality on steel and cast iron. Order this insert directly via Metav Werkzeuge or consult our team for application-specific recommendations. ADMT160608R-F56 (ADMT160608R-F56 WKP35S) — WKP35S milling insert for steel and cast iron · Walter Tools The ADMT160608R-F56 WKP35S is a precision indexable milling insert engineered for productive finishing and roughing operations in steel and cast iron. Tiger·tec Silver coating for extended tool life Optimised for steel (P) and cast iron (K) Parallelogram 85° shape for stable cutting 0.8 mm corner radius, 15° relief angle Durable coating for predictable tool life and economy The combination of Tiger·tec Silver technology and a WKP35S cutting grade provides a coated carbide construction that resists abrasive wear and thermal loading during continuous machining. This results in longer tool life and fewer indexings, which directly reduces downtime and tooling costs in medium- to high-volume production. The proprietary coating structure promotes predictable flank wear, enabling more reliable cycle planning and lower overall machining cost per component. Geometry that stabilises cutting and improves surface finish The Parallelogram 85° insert geometry, together with a 15° relief angle, ensures a robust support face and predictable engagement with the workpiece. The 0.8 mm corner radius contributes to vibration damping and delivers a consistent surface finish on each pass. These geometric characteristics make the insert particularly suitable where dimensional stability and repeatability are required, such as finishing passes or semi-finishing where minimal rework is a priority. Tailored for steel and cast iron with effective chip control Designed for ISO groups P and K, the grade is optimised for common steels and cast irons. The integrated F56 chipbreaker promotes controlled chip formation and evacuation, limiting recutting and improving process security in interrupted cuts or when machining complex castings. The grade’s balance between toughness and hardness helps avoid premature edge chipping while maintaining an effective cutting edge for reliable material removal rates. Practical integration for process reliability and inventory With a nominal size of 16 mm and a plate thickness of 06, the insert fits standard tool bodies and simplifies stock management. The tolerance class M supports repeatable positioning and toolholder interchangeability, reducing setup variability across shifts. For production planners and purchasing teams, this consistency translates into fewer rejects and streamlined tool-change procedures. If there is any uncertainty about suitability for a specific application, the technical team is available to advise on speeds, feeds and toolholder selection. Contact Metav Werkzeuge for tailored application support on Walter Tools’ Tiger·tec Silver inserts and secure the right configuration for efficient machining; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT160608R-F56-WKP35S-WALTER Designation: ADMT160608R-F56 WKP35S Manufacturer: Walter Tools Data Size: 16 mm Thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Geometry: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Material suitability: P (steel) and K (cast iron) Execution: T FAQ What materials is this insert designed for? The ADMT160608R-F56 WKP35S insert from Walter Tools is formulated for machining steel (ISO group P) and cast iron (ISO group K), with a grade engineered for the thermal and abrasive demands of these materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating enhances wear resistance and thermal stability, which extends tool life and supports more consistent cycle times under continuous machining. What cutting geometry ensures stability with this insert? The Parallelogram 85° form combined with a 15° relief angle and 0.8 mm corner radius provides robust support and reduced vibration, improving surface finish and dimensional repeatability. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
ADMT160608R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G carbide grade and the robust F56 chipbreaker for secure machining of stainless steels and heat‑resistant alloys; the parallelogram 85° geometry and 0.8 mm corner radius support reliable edge strength and surface quality. Order the ADMT160608R‑F56 WSM35G directly via Metav Werkzeuge or ask our consultants if needed. ADMT160608R-F56 WSM35G indexable milling insert – Tiger·tec Gold, F56 chipbreaker (for stainless steels & superalloys) — Walter Tools The ADMT160608R‑F56 WSM35G is an indexable milling insert designed for heavy‑duty machining of stainless steels and heat‑resistant superalloys, combining a heat‑resistant coating and a geometry optimised for stable cutting and predictable chip control. Tiger·tec Gold coating for heat resistance WSM35G grade for stainless and superalloys Parallelogram 85° geometry for versatile mounting 0.8 mm corner radius for reliable edge strength Higher cutting reliability for demanding materials The combination of the Tiger·tec Gold coating with the WSM35G grade gives a measurable advantage when machining tough, adhesive materials. The coating reduces flank wear and increases thermal resistance, while the grade formulation supports stable chip formation under elevated temperatures. For process engineers this means fewer tool changes and more consistent part quality, which translates into improved uptime and lower total machining cost. The abrasive and adhesive wear mechanisms common on stainless steels and superalloys are countered by the coating chemistry and substrate design, delivering a dependable cutting edge even in interrupted cuts. Predictable surface finish and edge security through geometry The parallelogram 85° format and the 15° clearance angle provide a stable seating in compatible toolholders and support conservative cutting directions when required. The F56 chipbreaker is tuned to produce short, controllable chips in stainless and heat‑resistant materials, reducing chatter and improving surface texture. The 0.8 mm corner radius increases edge resilience against notch wear without sacrificing acceptable surface finish, making this insert suitable for semi‑roughing to finishing passes where repeatability and component integrity matter. Integration into production for sustained productivity Inserts of this series are designed to deliver process security and reproducible performance. The tolerance class M and the insert design support quick indexing and consistent results across batches of parts. When paired with a properly matched cutter body, the insert offers long tool life and stable cutting behaviour, which helps to streamline tool inventory and simplify tool planning. Technical advisors can provide cutting data and parameter recommendations tailored to specific stainless grades or superalloy compositions to ensure optimal utilisation of the insert’s performance characteristics. For tailored recommendations on integrating Walter Tools Tiger·tec Gold inserts into existing machining processes, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT160608R-F56-WSM35G-WALTER Designation: ADMT160608R-F56 WSM35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Insert size: 16 Thickness code: 06 Geometry: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Applicable materials: S / M Suitable for: stainless steels Execution: T FAQ What materials is this insert designed for? The ADMT160608R‑F56 WSM35G insert from Walter Tools is formulated for stainless steels and heat‑resistant superalloys (material groups M and S), providing controlled chip formation and thermal resilience. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the insert improves thermal resistance and reduces flank wear, helping the ADMT160608R‑F56 WSM35G maintain a stable cutting edge and extend tool life in demanding applications. Which geometry features support mounting and stability? The parallelogram 85° geometry combined with a 15° clearance angle offers secure seating in compatible toolholders and supports stable cutting forces for repeatable machining performance. What role does the F56 chipbreaker play? The F56 chipbreaker is engineered to produce short, predictable chips in stainless steels and superalloys, reducing the risk of chip entanglement and improving surface finish and process reliability. Is this insert suitable for finishing operations? With a 0.8 mm corner radius and the robust WSM35G grade, the insert can be used for semi‑roughing and finishing passes where a balance of edge strength and surface quality is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global tool offering and is recognised for providing precision cutting solutions; protected trademarks and trade names belong to their respective owners. The mentioned article is original factory‑new product of the manufacturer.
ADMT160608R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from a combination of secure edge stability, enhanced chip control and geometry tuned for demanding materials — ideal for continuous, productive milling of stainless steel and heat-resistant alloys. Order directly via Metav Werkzeuge or consult the sales team for application-specific recommendations. ADMT160608R-F56 WSM45X milling indexable insert — coated carbide, 15° relief (Walter Tools) The ADMT160608R-F56 WSM45X is a high-performance milling indexable insert engineered for heavy-to-machine materials and stainless steel, offering robust edge life and predictable chip formation in demanding industrial applications. Coated carbide for stainless steel and superalloys Parallelogram 85° insert form 0.8 mm corner radius for edge strength 15° relief angle for secure cutting High-performance grade for difficult-to-machine alloys The WSM45X grade combines a coated carbide substrate with a chipformer optimised for tough materials, providing stable chip control and resistance to built-up edge. This grade is especially suited to applications involving stainless steel and heat-resistant superalloys where heat generation and material toughness challenge conventional inserts. The result is fewer interruptions, longer effective edge life and more consistent part quality in serial production. Geometry that supports secure cutting and surface quality The parallelogram 85° shape paired with a 15° relief angle and 0.8 mm corner radius offers a balanced mix of radial support and edge robustness. This geometry reduces the risk of chipping at the corner while maintaining an effective cutting wedge for moderate depth passes. The integrated F56 chipbreaker helps to fragment chips reliably, reducing re-cutting and improving surface finish, which is particularly beneficial when turning complex stainless steel components or machining interrupted cuts. Productivity gains through predictable behaviour and easier process planning By using an insert from the Walter Schneidstoffsorte series, shops gain a repeatable performance that simplifies process documentation and tool-change planning. The grade’s focus on thermal stability and edge protection reduces unscheduled tool changes, and predictable wear behaviour supports longer uninterrupted cycles. For production environments that require consistent batch-to-batch quality, this insert contributes to shorter set-up times and lower scrap rates. Contact Metav Werkzeuge for advice on optimising feed and speed for Walter Tools WSM45X inserts or to discuss stock availability and delivery options Technical Data Article number: ADMT160608R-F56-WSM45X-WALTER Designation: ADMT160608R-F56 WSM45X Product type: Milling indexable insert (Fräswendeschneidplatte) Brand: Walter Tools Facts Insert size: 16 Thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Special features Coating / grade family: WSM45X (Walter Schneidstoffsorte - Serie offen) Chipbreaker: F56 Insert form: Parallelogram 85° Material suitability: S / M (heat-resistant alloys, stainless steel) Tolerance class: M FAQ What materials is this insert designed for? The WSM45X grade is formulated for challenging materials such as heat-resistant superalloys and stainless steel; the insert’s coating and chipbreaker support secure chip formation and edge life in these applications. Which cutting geometry should be expected from the ADMT160608R-F56? This insert offers a parallelogram 85° form with a 15° relief angle and a 0.8 mm corner radius, delivering a compromise of edge strength and cutting efficiency suitable for medium to heavy milling operations. How does the F56 chipbreaker influence machining? The F56 chipbreaker on this Walter Tools insert promotes controlled chip fragmentation, reducing the risk of re-cutting and improving surface finish, particularly when machining stainless steel or interrupted cuts. Is this insert suitable for finishing passes on stainless steel? Yes; while primarily intended for heavy-to-machine materials, the combination of grade and geometry provides stable cutting behaviour that can be adapted to finishing operations with the correct feed and speed adjustments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanation and comparison only; there is no affiliation or endorsement implied between Metav Werkzeuge and the named manufacturers.
ADMT160608R-F56 WSP45G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold PVD grade, stable chip control and a compact parallelogram geometry for productive milling across a wide range of alloys; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADMT160608R-F56 WSP45G milling insert — Tiger·tec Gold grade by Walter Tools A high‑performance milling insert designed for versatile face and shoulder milling in steels, stainless steels and heat‑resistant alloys, combining wear‑resistant coating technology with a stable parallelogram geometry ADMT160608R-F56 WSP45G by Walter Tools Tiger·tec Gold PVD coating for long tool life Suitable for Steel, stainless and heat‑resistant alloys Parallelogram 85° insert, 15° clearance, 0.8mm radius Productivity gains from a tough cutting grade The combination of the Tiger·tec Gold coating and a PVD‑coated carbide substrate delivers enhanced resistance to abrasive wear and thermal stress, which directly supports longer tool life and fewer insert changes. For machining steel and stainless steel, the selected grade promotes secure chip formation and reduces the risk of built‑up edge, so cycle times can be shortened without compromising surface quality. The result is measurable production efficiency with a reliable cutting edge. Geometry engineered for reliable cutting performance The parallelogram 85° shape and a 15° clearance angle provide stable cutting engagement and predictable load distribution, which is particularly beneficial in shoulder and ramping operations. A 0.8mm corner radius balances edge strength with surface finish, enabling robust material removal while maintaining acceptable roughness levels. The F56 chipbreaker supports controlled chips for steady evacuation, reducing interruptions and the need for manual chip handling. Broad application range with defined material suitability Designed for applications across P / M / S material groups, the grade is optimised for unalloyed and alloyed steel, stainless steel, and heat‑resistant superalloys and titanium. This makes the insert an economical choice when a single grade must cover multiple workpiece materials. The coating and substrate combination focuses on thermal resilience and edge stability, which helps maintain dimensional accuracy under varying cutting conditions. Practical advantages in workshop workflows The insert's tolerance class M and execution code T ensure consistent seating and easy indexing in compatible milling cutters, supporting quick insert changes and predictable machine set‑ups. Using a single, versatile insert type reduces inventory complexity and simplifies tool selection for mixed‑material production runs. Together with the coating technology and chip control, this reduces downtime and contributes to a more consistent output quality. For tailored cutting recommendations and fast availability of the ADMT160608R-F56 WSP45G insert from Walter Tools, contact Metav Werkzeuge for application support and order processing via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT160608R-F56-WSP45G-WALTER Designation: ADMT160608R-F56 WSP45G Brand: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Core specifications Inscribed size: 16 Thickness code: 06 Clearance angle: 15° Corner radius: 0.8 Chipbreaker: F56 Tolerance class: M Execution: T Features and applications Material suitability: P / M / S (Steel; stainless steel; heat‑resistant alloys & titanium) Coating technology: Tiger·tec Gold (PVD coated carbide) Geometry: Parallelogram 85° Use case: face and shoulder milling, general milling tasks Focus: stable chip formation and prolonged edge life FAQ What materials is this insert suitable for? The ADMT160608R‑F56 WSP45G insert is suitable for machining Steel, stainless steel and heat‑resistant alloys/titanium, as indicated by the P / M / S material classification for the grade. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold provides improved wear resistance and thermal stability; in the ADMT160608R‑F56 WSP45G this leads to longer edge life and steadier performance across varied materials. What does the parallelogram 85° shape mean in practice? The parallelogram 85° geometry offers predictable cutting forces and stable engagement, which improves tool life and surface finish in shoulder and face milling. Is the insert compatible with standard toolholders? The insert uses common indexable insert seating conventions and tolerance class M, so compatibility with holders designed for ADMT‑style inserts is expected; correct seat and clamp verification is recommended. What role does the F56 chipbreaker play? The F56 chipbreaker promotes controlled chip formation and evacuation, reducing the chance of chip entanglement and enabling continuous machining with fewer interruptions. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used only for explanation. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, brand‑new merchandise from the manufacturer.
ADMT160608R-G56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WKP35G grade ensures reliable wear resistance and consistent edge life for mixed steel and cast‑iron work; the G56 chipbreaker and 0.8 mm corner radius support stable chip control and surface finish. Order directly via Metav Werkzeuge or request application advice from their specialists. ADMT160608R-G56 WKP35G milling indexable insert — Tiger‑tec Gold, for steel and cast iron (15°) The ADMT160608R-G56 WKP35G is a parallelogram 85° milling indexable insert engineered for productive machining of steel and cast iron, combining a robust coated grade with a dedicated chipbreaker geometry for dependable material removal. Tiger‑tec Gold coating WKP35G Suitable for steel (P) and cast iron (K) Parallelogram 85° form with 15° clearance G56 chipbreaker with 0.8 mm corner radius Maximise metal removal with stable edge life The coated cutting grade WKP35G, part of the Tiger‑tec Gold series, delivers a balance of wear resistance and toughness specifically adapted to the thermal and mechanical demands of machining steel and cast iron. The coating technology reduces abrasive wear and helps maintain a consistent cutting edge, so the insert sustains productivity over longer tool cycles. For manufacturing environments where predictable tool life supports process planning, this combination promotes fewer tool changes and steadier output. Consistent chip control for reliable surface quality The integrated G56 chipbreaker and the 0.8 mm corner radius are designed to manage chip formation in interrupted and continuous cuts, reducing the risk of built‑up edge and improving surface integrity. The parallelogram 85° form and 15° clearance angle create an advantageous cutting geometry that supports controlled cutting forces and directionality, leading to reproducible finishes in serial production. This geometry also contributes to vibration damping in many milling set‑ups, which benefits component tolerances and repeatability. Versatile, application‑oriented insert geometry With a standard size designation of 16 and thickness code 06, the insert fits common toolholders for face and shoulder milling operations where medium to heavy material removal is required. The tolerance class M supports interchangeability and predictable seating in clamping systems, simplifying tooling logistics. Because the grade is optimised for groups P and K (steel and cast iron), the same insert can be deployed across a range of components, reducing inventory complexity while retaining performance. Practical benefits for production planning Using an indexable insert with the WKP35G grade and Tiger‑tec Gold technology enables shops to prioritise cycle time and uptime. The engineered wear properties mean inspections and replacements can follow a predictable schedule, supporting maintenance planning. Improved chip control lowers the incidence of machining interruptions and tool rework, contributing to more efficient downstream processes and stable throughput. Contact Metav Werkzeuge for tailored application advice or to secure genuine Walter Tools Tiger‑tec Gold inserts for demanding steel and cast‑iron machining tasks Technical Data Article number: ADMT160608R-G56-WKP35G-WALTER Designation: ADMT160608R-G56 WKP35G Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Gold Facts Size: 16 Thickness: 06 Clearance angle: 15° Corner radius: 0.8 mm Form: Parallelogram 85° Chipbreaker: G56 Tolerance class: M Materials & features Applicable materials: Steel (P), Cast iron (K) Coating / Grade: WKP35G (Tiger‑tec Gold) Intended application: General milling operations in steel and cast iron Execution: T FAQ What materials is this insert intended for? The ADMT160608R-G56 WKP35G insert from Walter Tools is designed for machining steel (ISO group P) and cast iron (ISO group K), with the WKP35G grade tailored to those material behaviours. How does the G56 chipbreaker affect machining? The G56 chipbreaker promotes controlled chip formation and evacuation, enhancing surface finish and reducing the chance of built‑up edge when the ADMT160608R-G56 WKP35G insert is used in typical milling operations. What does the 85° parallelogram form mean for tool setup? The parallelogram 85° geometry provides a robust cutting face orientation that helps distribute cutting forces and is suitable for shoulder and face milling, offering stable engagement in many holder systems. Is the insert suitable for interrupted cuts? Yes, the combination of the WKP35G grade, G56 chipbreaker and a 0.8 mm corner radius offers resilience in interrupted and continuous cutting conditions typical of workshop and production environments. What does tolerance class M indicate? Tolerance class M denotes a medium tolerance ensuring reliable seating and repeatability in compatible clamping systems, facilitating quick insert changes without compromising positional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT160608R-G56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S carbide grade for extended tool life and reliable chip control; the G56 chipbreaker and 85° parallelogram form support consistent milling results in steel and cast iron. Order the insert directly via Metav Werkzeuge or consult the technical team for process data and cutting recommendations. ADMT160608R-G56 WKP35S indexable milling insert — Tiger‑tec Silver, G56 chipbreaker, Walter Tools The ADMT160608R-G56 WKP35S is an 85° parallelogram indexable milling insert designed for robust face and shoulder milling in steel and cast iron, offering wear-resistant performance under industrial cutting conditions Tiger‑tec Silver coated for long tool life Optimised G56 chipbreaker for reliable chips 85° parallelogram form with 15° relief angle 0.8 mm corner radius for consistent surface finish Higher productivity through wear-resistant coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S grade provides a balance of toughness and abrasion resistance that maintains edge integrity under typical milling loads. This insert is engineered to manage the heat and chip formation associated with machining steel and cast iron, which reduces unplanned tool changes and keeps production moving. The indexable insert geometry, with a stable parallelogram 85° shape and a defined 15° relief, supports predictable cutting behaviour and simplifies tool path calculation for CNC programmes. Consistent chip control and improved surface quality The G56 chipbreaker is optimised to produce short, controllable chips when cutting catalogued steel grades and many types of cast iron; this improves evacuation and lowers the risk of re-cutting. A 0.8 mm corner radius contributes to a steadier cutting edge and helps achieve reproducible surface finishes, especially in interrupted cuts or shoulder milling. Because the chipform is guided reliably, downstream cleaning and machine wear are reduced, which leads to measurable process stability over longer tool life cycles. Practical application benefits and economic impact Designed for industrial milling operations, this insert is suitable where consistent performance and uptime matter. The insert series supports shops running mixed batches of steel and cast iron, thanks to a carbide substrate and coating combination tuned for those materials. Using this indexable plate can lower tooling costs per component by extending life and reducing secondary operations; the stable cutting edge also supports higher feed and depth of cut strategies in many machining scenarios. For cases requiring further specification, cutting data sheets and compatible cutter geometries are recommended to match the insert's parameters with machine capability. For process reliability and technical advice on the ADMT160608R-G56 WKP35S from Walter Tools, contact Metav Werkzeuge for tailored cutting data, availability and ordering support Technical Data Article number: ADMT160608R-G56-WKP35S-WALTER Designation: ADMT160608R-G56 WKP35S Product type: Fräswendeschneidplatte (indexable milling insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Insert size: 16 Thickness: 06 Relief angle: 15° Corner radius: 0.8 mm Form: Parallelogram 85° Tolerance class: M Materials & special features Coating: Tiger‑tec Silver Grade: WKP35S Chipbreaker: G56 Material compatibility: P (steel), K (cast iron) Series description: coated carbide for steel and cast iron FAQ What materials is this insert suitable for? The ADMT160608R-G56 WKP35S insert from Walter Tools is intended for machining steel (ISO group P) and cast iron (ISO group K), as indicated by the grade and chipbreaker design. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, which helps maintain cutting-edge integrity and extends tool life during continuous milling tasks. What is the purpose of the G56 chipbreaker? The G56 chipbreaker is engineered to produce short, controllable chips in typical steel and cast iron milling, improving chip evacuation and contributing to consistent surface quality. Which cutter geometries suit the parallelogram 85° form? Parallelogram 85° inserts are commonly used in face and shoulder milling cutters designed for moderate radial engagement and reliable axial positioning; matching the insert to a compatible cutter body ensures correct cutting angles and clamping stability. Is this insert suitable for interrupted cuts? Yes, the combination of the WKP35S grade, Tiger‑tec Silver coating and a 0.8 mm corner radius supports robustness in interrupted cutting, offering a balance between edge strength and surface finish. Walter Tools is part of the Walter Group and is recognised for precision cutting tools that support high productivity and process reliability. Protected trademarks and product names are the property of their respective owners. The offered article is an original, factory-new product from the manufacturer.
ADMT160608R-G56 WSM35G WSM35G Wendeplatten - Walter Tools
Combine high edge stability and broad material capability through the Tiger·tec Gold coating and WSM35G grade for reliable, productive machining; order the insert directly via Metav Werkzeuge or contact our consultants for application support. ADMT160608R-G56 WSM35G milling insert, Tiger·tec Gold – Walter Tools The ADMT160608R-G56 WSM35G is a parallelogram 85° milling insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold coating for extended tool life Optimised for rostfreier Stahl and superalloys Parallelogram 85° form for secure clamping Corner radius 0.8 mm for consistent surface finish Increased productivity with a wear-resistant grade The combination of the Tiger·tec Gold coating and the WSM35G grade offers measurable gains in process reliability when tackling difficult-to-machine materials. The coated carbide formulation is developed to resist the high temperatures and adhesion tendencies typical of rostfreier Stahl and heat-resistant alloys, which leads to more consistent cutting edges and longer intervals between tool changes. In practical terms, this means fewer process interruptions and improved overall equipment effectiveness in series production. Geometry that improves seating and surface quality The insert’s Parallelogram 85° shape and 15° relief angle ensure secure seating in compatible cutters and promote predictable chip flow. The defined corner radius 0.8 mm supports a balance between strength and surface finish, making the insert suitable for both roughing where edge robustness is critical and semi-finishing where dimensional control matters. Clear geometric features reduce the risk of vibration and contribute to repeatable component tolerances on each machining pass. Chip control and thermal management for demanding alloys Equipped with the G56 chipbreaker, the insert assists in generating controllable, short chips even under the poor thermal conductivity of superalloys and rostfreier Stahl. The chipformer geometry, paired with the coating’s thermal resilience, lowers tendencies for built-up edge and helps maintain a stable cutting zone. For shops running mixed batches of stainless and high-temperature alloys, this translates into fewer scrap parts and more predictable cycle times. Economic benefits through longer edge life and fewer tool changes By extending edge life and stabilising chip formation, this cutting grade reduces unplanned downtime and cutting tool consumption. The insert’s tolerance class M supports consistent interchangeability in automated tool change systems, simplifying inventory management. For production environments where repeat accuracy and throughput are key metrics, the result is a demonstrable improvement in cost per component and cumulative machine utilisation. For specific machining recommendations with Walter Tools Tiger·tec Gold inserts, or to reserve ADMT160608R-G56 WSM35G stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid procurement. Technical data SKU: ADMT160608R-G56-WSM35G-WALTER Article: ADMT160608R-G56 WSM35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Insert size: 16 mm Thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: G56 Tolerance class: M Materials & special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Suitable for: rostfreier Stahl (M) and heat-resistant superalloys / titanium (S) Application: heavy-duty and stainless machining Benefit: optimised chip formation and stable cutting edge FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The ADMT160608R-G56 WSM35G insert is specified for rostfreier Stahl and provides improved edge life and chip control on such materials. What is the shape and relief angle of the insert? The insert uses a parallelogram 85° form with a 15° relief angle to ensure secure seating and stable cutting behaviour. Which chipbreaker is fitted and what is its benefit? The G56 chipbreaker is used on this grade to produce controlled, short chips, improving process security when machining difficult alloys. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold coating increases thermal and wear resistance of the coated carbide, leading to longer edge life and consistent results in demanding applications. Can this insert be used for both roughing and finishing operations? Yes. With a corner radius of 0.8 mm and robust grade characteristics, the insert is suitable for heavy cuts as well as semi-finish passes where a good surface is required. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The offered item is an original, factory-new product of the manufacturer.
ADMT160608R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge life, versatile material coverage and secure clamping for uninterrupted milling processes. The coated grade and stable geometry support consistent surface quality and long tool life; order genuine inserts via Metav Werkzeuge or consult the team for application advice. ADMT160608R-G56 WSP45G – indexable milling insert, Tiger‑tec Gold, Walter Tools, Parallelogram 85°, 15° free angle The ADMT160608R-G56 WSP45G is a coated carbide indexable milling insert engineered for versatile face and slot milling where a balance of edge stability and heat resistance is required. Tiger‑tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° for secure clamping 0.8 mm corner radius for robust cutting edge Engineered for consistent milling performance The combination of Tiger‑tec Gold coating and the WSP45G grade provides a PVD‑coated carbide chemistry aimed at extended edge life and reliable chip control. Designed as a versatile P/M/S solution, the insert resists the thermal and mechanical loads typical of milling operations; the 15° free angle reduces rubbing on the relief face, while the 0.8 mm corner radius supports a stable cutting edge for repeatable surface finish. This engineering focus directly benefits cycle stability and reduces downtimes associated with premature edge failure. Greater process reliability through secure geometry and tolerance The parallelogram 85° form offers a compact clamping footprint and a positive shear geometry that enhances cutting stability in interrupted cuts. With tolerance class M and execution code T, the insert maintains consistent seat fit and repeatability across tool holders, which contributes to predictable tool life and consistent part quality. The controlled geometry supports efficient chip formation with the supplied G56 chipbreaker, promoting reliable swarf evacuation and fewer rework cycles. Material guidance and application advantages Classified for ISO material groups P / M / S, the insert suits unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. For these demanding materials, the coated grade emphasises wear resistance and thermal stability to counteract built‑up edge and edge breakdown. As an indexable plate for common milling systems, the product is a practical choice where flexible material coverage and steady performance are priorities. For further machining recommendations or to verify compatibility with a specific workpiece, Metav Werkzeuge provides technical support and material pairing advice. Contact Metav Werkzeuge for specification advice and original Walter Tools Tiger‑tec Gold inserts using SKU ADMT160608R-G56-WSP45G-WALTER Technical data Article number: ADMT160608R-G56-WSP45G-WALTER Designation: ADMT160608R-G56 Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Execution: T Tolerance class: M Facts Corner radius: 0.8 mm Free angle: 15° Insert size: 16 mm Thickness code: 06 Shape: Parallelogram 85° Special features Coating: Tiger‑tec Gold PVD Chipbreaker: G56 Material compatibility: P / M / S (Stahl, rostfreier Stahl, superalloys) Abrasion and heat resistant grade for milling applications FAQ What materials is the ADMT160608R-G56 WSP45G suitable for? The ADMT160608R-G56 WSP45G is specified for ISO groups P / M / S, covering Stahl, rostfreier Stahl and heat‑resistant superalloys, which makes it suitable for a wide range of milling tasks. How does the Tiger‑tec Gold coating benefit milling operations? Tiger‑tec Gold PVD coating on the insert improves thermal resistance and wear performance, enabling the insert to maintain a stable cutting edge and consistent surface finish during prolonged milling cycles. What advantage does the parallelogram 85° shape provide? The parallelogram 85° geometry increases clamping security and provides a positive cutting orientation, which enhances stability in interrupted milling and reduces vibration. Can the insert be indexed for multiple cutting edges? Yes, the insert is designed as an indexable milling plate allowing rotation to a fresh edge; the robust geometry and tolerance class M support reliable repositioning and repeatable seating. Which chipbreaker is fitted and why does it matter? This grade uses the G56 chipbreaker, optimised for controlled chip formation in mixed materials, improving evacuation and reducing the risk of recut chips. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used here for descriptive purposes only and do not imply any affiliation or endorsement by the trademark holders. The offered item is original, brand‑new manufacturer goods of the named brand (Walter Tools).
ADMT160612R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of robust Tiger·tec Gold coating, the WKP35G grade and a parallelogram geometry for reliable, productive milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160612R-F56 WKP35G milling indexable insert — for steel and cast iron, Tiger·tec Gold | Walter Tools ADMT160612R-F56 WKP35G is a parallelogram 85° milling insert engineered for productive roughing and semi-finishing operations in steel and cast iron. Tiger·tec Gold coating for enhanced tool life Optimised for steel and cast iron machining Parallelogram 85° geometry for versatile milling 15° clearance with 1.2 mm corner radius Consistent productivity from advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G carbide grade delivers predictable wear behaviour and extended service life under demanding conditions. The coating technology reduces abrasive wear and improves thermal resistance, which means fewer tool changes and a steadier process. For production environments where uptime and repeatability matter, this insert contributes to a more efficient machining cycle by maintaining a stable cutting edge and reducing unexpected downtime. Geometry that simplifies setup and widens application scope The parallelogram 85° form with a 15° clearance and 1.2 mm corner radius supports robust engagement and flexible toolpath strategies. The 85° lead angle is well suited to slotting, face milling and shoulder operations where directional forces and chip flow are critical. A modest corner radius balances edge strength with surface finish capability, enabling effective material removal while still achieving acceptable surface quality in many common operations. Clear material suitability and practical implications Marked for the P / K designation, the insert is tailored for steel (P) and cast iron (K) in accordance with ISO grouping logic. This means the grade and chipformer are optimised to handle the heat generation and chip formation typical for steels, as well as the abrasive and often brittle chips from cast iron. Where operators are working across mixed batches of unalloyed, alloyed steel and grey or nodular cast iron, the insert provides a reliable, single-solution approach that reduces tool complexity in the tool crib. Process benefits and shop-floor considerations The integrated F56 chipbreaker promotes controllable chip shaping, helping to avoid long, entangling swarf and improving evacuation in confined toolpaths. Tolerance class M and the standardised insert dimensions simplify toolholder selection and repeatable clamping, which supports consistent part-to-part accuracy. For production managers, these technical aspects translate into measurable benefits: fewer interruptions for regrinds, predictable cycle times and improved throughput reliability. Contact Metav Werkzeuge for tailored cutting data and availability of the Tiger·tec Gold WKP35G ADMT160612R-F56 insert — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: ADMT160612R-F56-WKP35G-WALTER Product: Milling indexable insert Designation: ADMT160612R-F56 WKP35G Brand: Walter Tools Facts Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Shape: Parallelogram 85° Clearance angle: 15° Corner radius: 1.2 mm Size: 16 Thickness: 06 Tolerance class: M Execution: T Special features Coating: Tiger·tec Gold Material designation: P / K (steel / cast iron) Main applications: Steel machining, Cast iron machining FAQ What materials is this insert intended for? The insert is intended for steel and cast iron machining, reflecting the P / K designation and the application focus of the WKP35G grade. What coating and grade improve wear resistance? The Tiger·tec Gold coating combined with the WKP35G grade provides enhanced abrasive and thermal resistance for extended tool life. Which geometries and chip control features support productive milling? The parallelogram 85° geometry together with the F56 chipbreaker and a 1.2 mm corner radius balance chip control and edge strength for a range of milling operations. Is the insert suitable for stainless steel? Stainless steel suitability is not specified for this grade; the insert is optimised for steel and cast iron as indicated. How does the clearance angle affect cutting performance? The 15° clearance angle helps to reduce rubbing and improves cutting stability, which supports consistent surface quality and reduced cutting forces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes only; there is no affiliation implied. The offered article is an original, brand-new product from the manufacturer.
ADMT160612R-F56 WKP35S W KP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WKP35S carbide grade and geometry tuned for stable chip control to boost productivity and tool life; order the ADMT160612R-F56 WKP35S directly via Metav Werkzeuge or ask our consultants if needed. ADMT160612R-F56 WKP35S — milling indexable insert by Walter Tools, for steel and cast iron, 15° relief ADMT160612R-F56 WKP35S is a milling indexable insert designed for productive machining of steel and cast iron components in industrial milling applications Tiger·tec Silver coating for wear resistance WKP35S grade for steel and cast iron 15° relief angle for secure cutting Parallelogram 85° shape with R1.2 corner radius Longer tool life through advanced coating and grade The insert is manufactured in the WKP35S carbide grade and finished with the Tiger·tec Silver coating, a combination that significantly improves wear resistance and extends edge life under typical industrial cutting conditions. Coated carbide reduces flank wear and microchipping compared with uncoated grades; this yields fewer tool changes and lower overall machining cost per component, making the solution economically attractive for medium- to high-volume production. Stable geometry for reliable chip control and surface finish A parallelogram 85° plate form with a 15° relief angle and a corner radius R1.2 mm gives the insert strong edge support and effective chip separation when used with the F56 chipbreaker. The geometry reduces cutting forces and vibration, which improves dimensional stability and surface finish on the workpiece. Tolerance class M ensures consistent seating and repeatable results across index changes, supporting tight process control on milling machines. Designed specifically for ISO P and K materials This grade and coating are optimised for the ISO groups P (steel) and K (cast iron). The substrate and coating combination handles the heat and continuous chip formation typical of steel cutting, while also tolerating the abrasive characteristics and short, breaking chips of cast iron. By matching the insert to the material group, users can expect improved tool life and steady machining performance across a broad range of alloyed and unalloyed steels as well as grey and nodular cast iron. Seamless integration into productive machining processes Available as an indexable insert with the designation ADMT160612R-F56 WKP35S, this component fits common milling tool holders designed for parallelogram inserts and supports quick index changes to reduce downtime. The overall design promotes predictable performance during high-duty cycles and is suitable for shops seeking to increase throughput without sacrificing surface quality. For production advice or to confirm holder compatibility, Metav Werkzeuge offers application support and technical guidance. Discuss application requirements with Metav Werkzeuge to specify the Walter Tools ADMT160612R-F56 WKP35S for process optimisation and reliable production results Technical Data Article number: ADMT160612R-F56-WKP35S-WALTER Designation: ADMT160612R-F56 WKP35S Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger·tec Silver Core data Relief angle: 15° Corner radius: R1.2 mm Plate size: 16 Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Shape: Parallelogramm 85° Material groups: P / K Execution: T FAQ What materials is the ADMT160612R-F56 WKP35S suitable for? The ADMT160612R-F56 WKP35S is specified for ISO P (steel) and ISO K (cast iron) applications; the WKP35S grade and Tiger·tec Silver coating handle heat and abrasive wear typical of these material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on this milling insert reduces flank wear and improves abrasion resistance, which extends tool life and maintains cutting performance during prolonged production runs. Which geometry features improve chip control? The parallelogram 85° shape combined with the F56 chipbreaker and the 15° relief angle promotes controlled chip formation and lower cutting forces, resulting in better surface finish and stable tool behaviour. Is the ADMT160612R-F56 compatible with standard tool holders? The ADMT160612R-F56 WKP35S is produced to fit holders designed for parallelogram inserts of this size; tolerance class M supports reliable seating and repeatability during index changes. What advantages does WKP35S offer over uncoated grades? The WKP35S coated carbide offers enhanced wear resistance and consistent edge strength in both steel and cast iron machining, which typically results in fewer tool changes and improved process economy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation; there is no affiliation between our company and the named manufacturers. The offered article is an original, brand-new product from the manufacturer.
ADMT160612R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, a robust F56 chipbreaker and a precise 85° parallelogram form for secure machining of stainless steels and heat-resistant alloys; order the ADMT160612R-F56 WSM35G indexable insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations ADMT160612R-F56 WSM35G Fräswendeschneidplatte – Tiger·tec Gold, F56 chipbreaker (Walter Tools) The ADMT160612R-F56 WSM35G is a parallelogram indexable milling insert designed for high-demand machining of stainless steels and heat-resistant superalloys, offering stable chip control and extended tool life Tiger·tec Gold coating for extended tool life WSM35G grade optimised for stainless steels F56 chipbreaker for reliable chip control Parallelogram 85° form with 15° clearance Consistent performance on hard-to-machine alloys The combination of the WSM35G grade and Tiger·tec Gold coating delivers a balanced mix of wear resistance and thermal stability, specifically developed for demanding materials. This makes the insert a rational choice where process reliability is paramount: the coating reduces flank wear and helps maintain a stable cutting edge under thermal stress, while the grade chemistry supports controlled built-up edge behaviour. For shops focused on reproducible cycle times and fewer tool changes, this translates into measurable productivity gains and lower process variability. Geometry tailored for predictable chip formation The F56 chipbreaker and the parallelogram 85° form were selected to produce short, controllable chips when machining stainless steels and related alloys. The insert’s 15° clearance and 1.2 mm corner radius ensure a robust edge that tolerates interrupted cuts and moderate engagement depths. These geometrical attributes simplify fixture planning and reduce rework caused by unpredictable chip behaviour, delivering a cleaner surface finish and fewer interruptions in automated production environments. Operational benefits that support throughput and quality With a tolerance class M and a compact size designation, this insert is intended for assemblies that demand repeatable positioning and stable cutting forces. Reduced tool changes and consistent edge life contribute to lower overall machining costs and improved adherence to production schedules. The design also supports flexible toolholder choices common in modern CNC milling setups, so integration into existing tool systems is straightforward for production engineers seeking immediate process improvements. Discuss machining strategies for Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge – contact info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and selection support Technical Data Article number: ADMT160612R-F56-WSM35G-WALTER Designation: ADMT160612R-F56 WSM35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Tolerance class: M Facts Clearance angle: 15° Corner radius: 1.2 mm Plate size: 16 Plate thickness designation: 06 Form angle: Parallelogram 85° Chipbreaker: F56 Special features Coating technology: Tiger·tec Gold Applicable materials: M (stainless steels), S (superalloys / titanium) Design: Parallelogram indexable insert Main application: Milling of difficult-to-cut alloys FAQ What materials is this insert best suited for? The ADMT160612R-F56 WSM35G insert is formulated for stainless steels (ISO group M) and heat-resistant superalloys or titanium (ISO group S), providing thermal stability and controlled chip formation. How does the F56 chipbreaker affect machining performance? The F56 chipbreaker produces short, consistent chips during milling, improving material evacuation and reducing the risk of entanglement or surface damage when using the ADMT160612R-F56 WSM35G insert. Can the insert withstand interrupted cuts and moderate radial engagement? Yes; the 1.2 mm corner radius and 15° clearance combine to protect the cutting edge against impact and thermal loading, supporting interrupted cuts in demanding production scenarios. Is this insert compatible with standard toolholders for parallelogram inserts? The parallelogram 85° form and standard groove geometry are compatible with common indexable milling holders designed for this shape; ensure toolholder seat and clamping match the insert designation. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT160612R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the WSM45X coated-carbide grade combined with the F56 chipbreaker and a 15° relief angle to improve chip control and edge stability in demanding stainless-steel and superalloy milling. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. ADMT160612R-F56 WSM45X milling insert, Parallelogram 85°, 15° relief – Walter Tools The ADMT160612R-F56 WSM45X is a coated carbide milling insert designed for secure and productive machining of stainless steels and heat‑resistant superalloys in demanding industrial applications F56 chipbreaker for controlled chips 15° relief angle for versatile engagement 1.2 mm corner radius for edge strength Coated carbide grade WSM45X for tough materials Consistent performance in difficult-to-machine materials The combination of the WSM45X grade and a coated carbide substrate provides reliable performance when machining materials that are prone to work hardening and high heat generation. Classified for ISO groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium), the material specification supports stable chip formation and a durable cutting edge. This results in fewer interruptions for tool correction, improved process stability and more predictable component quality when processing stainless steels and similar alloys. Geometry engineered for secure cutting and chip control The parallelogram 85° form together with the 15° relief ensures a secure engagement angle that supports both climb and conventional milling strategies where applicable. The F56 chipbreaker is tuned for reliable chip segmentation and evacuation in sticky or gummy materials, reducing the risk of built‑up edge and surface damage. A 1.2 mm corner radius increases edge robustness, allowing higher feed rates in many applications while maintaining surface integrity and tool life. Process advantages and application suitability Designed as part of the Walter Schneidstoffsorte series, this insert emphasises process security and long tool life in serial and batch production. The combination of geometry and material leads to predictable wear behaviour and consistent surface finish, which supports higher machine utilisation and reduced rework. The insert is suitable for demanding milling tasks in mechanical engineering and aerospace component production where stainless steels and superalloys are common. Contact Metav Werkzeuge for application advice and availability of the Walter Tools ADMT160612R-F56 WSM45X milling insert – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: ADMT160612R-F56-WSM45X-WALTER Product name: ADMT160612R-F56 WSM45X Manufacturer: Walter Tools Data Insert size: 16 Thickness designation: 06 Corner radius: 1.2 mm Relief angle: 15° Plate form: Parallelogramm 85° Chipbreaker: F56 Tolerance class: M Special features Grade series: Walter Schneidstoffsorte - Serie offen Sort: WSM45X (coated carbide) Suitable for: Stainless steels (M) Suitable for: Superalloys / Titanium (S) Execution: T Material indication: S / M FAQ What materials is this insert designed for? The ADMT160612R-F56 WSM45X is specified for stainless steels (M) and heat‑resistant superalloys/titanium (S) according to the grade characteristics of WSM45X. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT160612R-F56 WSM45X promotes controlled chip segmentation and evacuation, which helps to avoid built‑up edge and maintain surface quality in adhesive materials. What does the 1.2 mm corner radius mean for tool life? A 1.2 mm corner radius increases edge strength on the ADMT160612R-F56 WSM45X, improving resistance to chipping and enabling higher feed rates while preserving tool life. Is the insert suitable for interrupted cuts? Yes; the combination of the parallelogram 85° geometry and the robust WSM45X grade makes the insert suited to applications with intermittent engagements and varying cutting conditions. Which toolholders are compatible with this insert form? The ADMT160612R-F56 WSM45X uses a parallelogram 85° form and is compatible with milling cutter bodies designed for ADMT‑style inserts of matching size and clamping specification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanation only and do not indicate any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
ADMT160612R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of high productivity, broad material capability and stable edge life offered by the ADMT160612R-F56 WSP45G insert; its Tiger·tec Gold technology and robust geometry ensure reliable milling results in varied production environments. Order the ADMT160612R-F56 WSP45G directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice. ADMT160612R-F56 ADMT160612R-F56 WSP45G WSP45G - Milling Insert, Tiger·tec Gold, 15° free rake - Walter Tools The ADMT160612R-F56 WSP45G is a coated carbide milling insert designed for versatile milling of steel, stainless steel and heat-resistant alloys in general-purpose and demanding finishing operations. Tiger·tec Gold PVD coating Suitable for steel, stainless, superalloys 15° free rake, 1.2 mm corner radius Parallelogram 85° form, size 16 Consistent performance across challenging materials The combination of the WSP45G grade and the Tiger·tec Gold PVD coating provides a balance of toughness and wear resistance that benefits throughput and tool life when machining steel, stainless steel and superalloys. This grade has been engineered to support secure chip formation under the high thermal loads typical for these materials, which translates into fewer tool changes and more stable cycle times in serial production. The result is a measurable gain in process reliability for both roughing and finishing passes when using the appropriate cutting data. Geometry engineered for stability and repeatable accuracy With a 15° free rake and a 1.2 mm corner radius in a parallelogram 85° form, the insert offers a secure clamping position and predictable cutting behaviour. The geometry reduces radial forces and supports a durable cutting edge, meaning less vibration and improved surface quality on finished components. For customers seeking consistent dimensional tolerance and surface integrity, the insert’s form and radius contribute directly to repeatable machining results. Coating and grade delivering extended tool life The Tiger·tec Gold surface treatment on the coated carbide substrate improves heat resistance and protects the cutting edge against abrasive wear and built-up edge formation. This coating, combined with the WSP45G substrate characteristics, supports longer tool life in mixed-material shops and under elevated cutting temperatures. The economic benefit is reflected in fewer indexings and lower tooling consumption per part, making it suitable for both jobbing environments and larger batch runs. Practical application and process benefits The insert’s chipbreaker F56 and the proven grade selection simplify process planning for a wide range of milling tasks. Where effective chip control and edge stability are essential, this insert reduces downtime from poor chip evacuation and minimises rework. Integration into existing toolholders that accept the ADMT form is straightforward, enabling quick toolset-up and short changeovers. For further machining data or cutting-parameter suggestions, Metav Werkzeuge provides tailored recommendations to align the insert’s strengths with specific machine capabilities and workpiece materials. For application support or to request delivery of Walter Tools Tiger·tec Gold inserts such as the ADMT160612R-F56 WSP45G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge is available to advise on optimal cutting data and supply options. Technical data SKU: ADMT160612R-F56-WSP45G-WALTER Name: Fräswendeschneidplatte ADMT160612R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Free rake: 15° Corner radius: 1.2 mm Size: 16 Thickness: 06 Tolerance class: M Plate form angle: 85° Special features Coating: Tiger·tec Gold (PVD) Grade: WSP45G Chipbreaker: F56 Shape: Parallelogram 85° Material suitability: steel, stainless steel, superalloys Execution: T FAQ Is this insert suitable for stainless steel milling? Yes. The ADMT160612R-F56 WSP45G grade and Tiger·tec Gold coating are designed for stainless steel machining and help control built-up edge and heat during cutting. Which materials can be milled with this insert? The insert is specified for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat-resistant superalloys. What is the corner radius and how does it affect surface finish? The corner radius is 1.2 mm; this radius provides increased edge strength and contributes to a smoother surface in finishing operations when paired with appropriate cutting parameters. How does the chipbreaker F56 influence the cutting process? The F56 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving stability in intermittent milling passes. Can this insert be used for both roughing and finishing? Yes. The combination of WSP45G grade and the coated surface balances toughness and wear resistance, making the insert appropriate for a range of operations from medium roughing to finishing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark holders beyond the sale of original, factory-new products. The offered item is an original, brand-new article from the manufacturer.
ADMT160616L-F56 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WKP35G grade tuned for steel and cast iron, and the stable F56 chipbreaker for reliable, productive milling; order directly via Metav Werkzeuge or consult our technical team for application support. ADMT160616L-F56 WKP35G Milling Insert, Tiger·tec Gold – for Steel and Cast Iron (Walter Tools) The ADMT160616L-F56 WKP35G is a Tiger·tec Gold milling insert engineered for high-productivity machining of steel and cast iron, featuring a 15° clearance and a 1.6 mm corner radius for robust cutting performance Tiger·tec Gold coating for high wear resistance WKP35G grade optimised for steel and cast iron Parallelogram 85° form for secure seating 15° clearance and 1.6 mm corner radius Improved machining stability through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade delivers enhanced wear resistance and consistent edge stability during prolonged cutting cycles. As a result, the insert supports longer tool life and reduced interruption for index changes, which benefits batch production and continuous machining. The integrated chipbreaker F56 controls chip shape in the typical thermal and deformation conditions of machining steel and cast iron, aiding process security and predictable tool behaviour. Broad suitability for steel and cast-iron applications Designed according to ISO material groups P and K, the geometry and grade ensure effective performance across unalloyed and alloyed steel as well as abrasive cast iron. The parallelogram 85° plate form provides a compact clamping interface, improving rigidity in milling heads where radial and axial forces are significant. With a nominal insert size of 16 and the tailored chipflow characteristics, the component is suitable for operational setups that prioritise stable chip evacuation and repeatable surface quality. Durable geometry for strength and surface quality A 15° free angle combined with a 1.6 mm corner radius increases edge strength while maintaining a balance between cutting aggressiveness and surface finish. The tolerance class M supports consistent indexing and positional accuracy across tool changes, and the thickness code 06 contributes to mechanical stability in the toolholder. These geometry choices translate into fewer fixture adjustments and a reliable finish on workpieces with variable cutting conditions. Economic benefits and process predictability By reducing flank wear and promoting stable chip formation, the insert contributes to lower overall tooling costs and less machine downtime. The WKP35G chemistry and the Tiger·tec Gold coating are engineered for productive metal removal rates while retaining surface integrity, making the insert an economical option in mid- to high-volume milling operations. Proven in industrial environments, this solution supports consistent output and predictable maintenance cycles. For application advice or to secure supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised consultation and stock information via email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: ADMT160616L-F56-WKP35G-WALTER Product: ADMT160616L-F56 WKP35G Type: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Free angle: 15° Corner radius: 1.6 mm Insert size: 16 Thickness code: 06 Plate form: Parallelogram 85° Tolerance class: M Special features Grade: WKP35G Chipbreaker: F56 Material application: P / K (steel and cast iron) Execution: T Stable chip formation and productive cutting Coated carbide (Tiger·tec Gold) FAQ What materials is this insert suited for? The ADMT160616L-F56 WKP35G insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron with optimised chip control. How does the Tiger·tec Gold coating benefit the tool life? The Tiger·tec Gold coating on the WKP35G grade reduces abrasive and thermal wear, which extends life and maintains cutting-edge stability under demanding milling conditions. What role does the F56 chipbreaker play? The F56 chipbreaker shapes and breaks chips reliably when milling steel and cast iron, supporting continuous chip evacuation and minimising recutting risks. Is the geometry suitable for heavy-duty milling? Yes, the parallelogram 85° form combined with the 15° free angle and 1.6 mm corner radius provides mechanical stability for demanding milling operations. Can the insert be used in standard Walter toolholders? The insert matches common clamping interfaces for its plate form and size; compatibility should be checked against the specific toolholder dimensions before selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not imply any affiliation. This listing describes original, factory-new items supplied by Walter Tools.
ADMT160616L-F56 WKP35S T Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Silver coating, a robust WKP35S carbide grade and a stable parallelogram geometry for consistent, productive milling of steel and cast iron; order genuine inserts through Metav Werkzeuge or consult our specialists for application-specific guidance. ADMT160616L-F56 WKP35S milling insert, Tiger·tec Silver coating, for steel & cast iron — Walter Tools The ADMT160616L-F56 WKP35S is a parallelogram milling insert engineered for high-productivity finishing and medium-heavy machining of steels and cast irons. Tiger·tec Silver coated for high wear resistance Optimised for steel and cast iron (ISO P & K) Parallelogram 85° form with 15° clearance angle 1.6 mm corner radius for stable chip formation Proven machining performance for steels and cast iron The coated carbide grade WKP35S, belonging to the Tiger·tec Silver series, offers a balanced combination of wear resistance and edge stability that is particularly suitable for ISO groups P (steel) and K (cast iron). The positive parallelogram geometry with an 85° approach and a 15° clearance angle contributes to a controlled engagement and predictable cutting forces, while the 1.6 mm corner radius supports consistent chip formation. These design choices translate into fewer insert changes and more productive cut time on compatible machining centres. Practical benefits in the production environment This indexable plate is configured for reliable behaviour in batch and continuous production. The F56 chipformer and the coated-carbide composition facilitate manageable chip breakage when working with typical steel grades and grey or nodular cast iron; the result is reduced risk of built-up edge and improved surface consistency. The insert’s geometry and coating make it a pragmatic choice for shops seeking a straightforward, durable solution for turning down cycle times and handling varying workpiece batches without complex process changes. Selection, handling and compatibility guidance The insert is supplied in the ADMT16 family size with a nominal plate size of 16 and a thickness designation of 06. It is made for applications where a medium corner radius and a robust coating yield repeatable results. For integration into existing toolholders, the parallelogram shape and tolerance class M ensure compatibility with holders designed for ADMT-style plates. Walter Tools’ carbide grades are developed for broad applicability; when in doubt about edge preparation or cutting data, consult the toolholder manufacturer or Metav Werkzeuge for tailored recommendations. Contact Metav Werkzeuge to discuss suitable cutting data, toolholder matches or to request application advice for Walter Tools ADMT inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT160616L-F56-WKP35S-WALTER Designation: ADMT160616L-F56 WKP35S Product type: milling insert Manufacturer: Walter Tools Facts Size: 16 Thickness: 06 Clearance angle: 15° Corner radius: 1.6 mm Plate form: Parallelogram 85° Tolerance class: M Chipformer: F56 Grade: WKP35S Special features Series: Tiger·tec Silver Coating: coated carbide technology Material suitability: steel (ISO P) and cast iron (ISO K) Execution: T FAQ Is this insert suitable for roughing and finishing operations? The ADMT160616L-F56 WKP35S insert is designed primarily for finishing to medium-heavy machining; the WKP35S grade and the F56 chipformer favour stable finishes, while the plate geometry also allows productive light-medium roughing within recommended cutting parameter ranges. Which materials can be machined with this insert? The insert is suitable for steel (ISO P) and cast iron (ISO K) applications; the Tiger·tec Silver coating and WKP35S carbide grade are selected to cope with the thermal and abrasive conditions typical for those groups. How does the 15° clearance angle affect cutting performance? A 15° clearance contributes to a positive cutting geometry that helps reduce cutting forces and supports a predictable chip flow, improving surface quality and tool life under appropriate feeds and speeds. Can this insert be used in standard ADMT toolholders? The insert follows ADMT16 geometry; holders compatible with ADMT-style parallelogram plates and the specified tolerance class M will accept the plate, but holder manufacturer guidance should be followed for correct clamping and cutting parameters. What is the purpose of the 1.6 mm corner radius? The 1.6 mm radius provides a compromise between edge strength and achievable surface finish: it supports stable cutting under intermittent engagement and helps avoid premature chipping on tougher steels and interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; www.walter-tools.com The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no association between our company and the brands named. The item offered is original, factory-new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com