ADMT120425R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life through Tiger·tec Silver and stable chip control from the F56 chipbreaker for consistent, productive milling; order the ADMT120425R-F56 WKP35S directly via Metav Werkzeuge or consult our experts for application-specific advice ADMT120425R-F56 WKP35S — indexable milling insert for steel and cast iron by Walter Tools The ADMT120425R-F56 WKP35S is a coated indexable milling insert designed for general steel and cast iron machining, offering a balance of durability and dependable chip control in a parallelogram 85° geometry Tiger·tec Silver coating for extended life Optimised F56 chipbreaker for stable chips Parallelogram 85° form for versatile milling Suitable for steel and cast iron machining Longer tool life thanks to Tiger·tec Silver coating The coated hardmetal grade WKP35S, part of the Tiger·tec Silver family, is engineered to resist abrasive wear and thermal stresses common in machining steels and cast irons. This coating technology reduces flank wear rates and maintains a stable cutting edge over longer tool paths, which translates into fewer insert changes and improved overall throughput. For production environments where consistent tool life reduces downtime, the coated grade provides a measurable benefit to cycle-time reliability and cost-efficiency. Predictable chip formation and process stability The F56 chipbreaker geometry is developed to generate short, controllable chips when machining group P (steel) and group K (cast iron) materials according to ISO 513. Effective chip control reduces risk of built-up edge and lowers the likelihood of tool or workpiece damage, enabling steady feed rates and repeatable surface quality. The combination of chipformer and grade supports stable cutting forces, which is particularly valuable in batch production and mixed-material workflows. Geometry for flexible milling strategies A parallelogram plate in an 85° form with a 15° clearance angle provides a versatile contact geometry for face and light slot milling operations. The insert’s corner radius of 2.5 mm helps maintain edge strength while delivering the desired surface finish, making it suitable for both roughing and semi-finishing passes. Such geometry allows process engineers to adapt cutting parameters for either higher metal removal rates or improved surface integrity without changing insert families. Application guidance and industrial benefits This indexable insert is supplied in the execution type T and commonly measures as the 12 series format, making it compatible with standard toolholders designed for this ISO-style designation. The insert’s tolerance class M ensures consistent interchangeability and predictable toolholder fit, which supports stable clamping and runout behaviour. When integrated into a machining cell, the insert helps to reduce inspection intervals and supports predictable production planning thanks to its repeatable performance attributes. For reliable milling results with the ADMT120425R-F56 WKP35S from Walter Tools, contact Metav Werkzeuge for tailored advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADMT120425R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT120425R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger-tec Silver Core specifications Size: 12 Plate thickness: 04 Corner radius: 2.5 mm Clearance angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Materials & special features Grade: WKP35S (coated cemented carbide) Applicable materials: Steel (P) and Cast iron (K) Tolerance class: M Execution: T Story trigger: indexable inserts FAQ What materials is this insert suited for? The ADMT120425R-F56 WKP35S is formulated for machining group P (steel) and group K (cast iron) materials according to ISO 513, making it suitable for a wide range of steels and cast irons. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and thermal softening, extending insert life and improving downtime intervals in serial production. Which chipbreaker should be selected for stable chip flow? The F56 chipbreaker integrated into this insert is optimised for short, controlled chips in steel and cast iron, supporting stable feeds and reducing chip-handling issues. Is the insert compatible with standard toolholders? The insert follows common ISO-style dimensions for the 12 series in a parallelogram 85° form and tolerance class M, enabling compatibility with appropriate toolholders designed for this format. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between the seller and the named manufacturers. The offered article is an original, brand-new product of the manufacturer (Walter Tools).
ADMT120425R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for reliable edge stability and broad material capability; the F56 chipformer supports consistent chip control and high productivity, while the parallelogram geometry and 15° relief ensure robust milling performance. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. ADMT120425R-F56 WSP45G – Indexable milling insert, Tiger·tec Gold coating, 15° relief (Walter Tools) ADMT120425R-F56 WSP45G is a high-performance indexable milling insert designed for versatile milling of Stahl, rostfreier Stahl and demanding superalloys and titanium components Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, superalloys Parallelogram 85° geometry 15° relief, 2.5 mm corner radius Greater productivity through stable cutting and chip control The coated grade from the Tiger·tec Gold family combines wear resistance with toughness to extend tool life under industrial milling conditions. The WSP45G grade is optimised for secure chip formation with the F56 chipbreaker, which reduces the risk of built-up edge and supports a steady material flow away from the cutting zone. This leads to fewer interruptions, more consistent component quality and a measurable increase in throughput for series production. The insert’s construction is aimed at delivering predictable performance even when machining mixed batches of components. Reduced tool changes and process reliability from geometry and edge design A 15° relief angle and a 2.5 mm corner radius provide a robust cutting edge that tolerates intermittent cuts and varying engagement depths. The parallelogram 85° shape gives favourable cutting directions for shoulder and face milling, distributing cutting forces to the insert pocket and machine spindle. For workshops seeking fewer tool interventions and reliable cycle times, these geometric choices translate into practical benefits: longer intervals between indexings and a lower rate of tool-related rejects, especially in heavy-duty operations. Broad material coverage for flexible production planning The insert is specified for material groups P, M and S, which correspond to machining Stahl, rostfreier Stahl and heat-resistant superalloys/titanium respectively. The combination of the WSP45G substrate and the Tiger·tec Gold coating balances thermal resistance with edge stability, enabling one grade to be used across multiple workpiece types. This simplifies tool inventory and supports flexible job scheduling: the same insert can be deployed for a range of components without compromise on surface finish or dimensional repeatability. Practical handling, mounting and repeatable accuracy Dimension and tolerance designations are aimed at compatibility with standard milling cutters that accept parallelogram inserts. The insert’s tolerance class M and its consistent thickness code allow straightforward seating in the cutter pocket and reproducible index positions after rotation. These characteristics support simple assembly routines, reliable torque transfer and consistent results from one operator to the next. Backed by the manufacturer’s focus on precision, the insert contributes to stable process windows and traceable manufacturing outcomes. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT120425R-F56-WSP45G-WALTER Article designation: ADMT120425R-F56 WSP45G Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 2.5 mm Insert size: 12 Thickness code: 04 Tolerance class: M Special features Grade: WSP45G Chipformer: F56 Shape: Parallelogram 85° Suitable materials: P / M / S (Stahl, rostfreier Stahl, superalloys and titanium) Execution: T Designation without grade: ADMT120425R-F56 FAQ Which materials can this insert machine effectively? The ADMT120425R-F56 WSP45G insert from Walter Tools is specified for material groups P, M and S — in other words for Stahl, rostfreier Stahl and heat-resistant superalloys / titanium — offering a single-grade option for mixed-production environments. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WSP45G grade enhances wear resistance and temperature stability for the ADMT120425R-F56 WSP45G indexable milling insert, improving edge life and maintaining surface quality across extended cycles. How do the 15° relief and 2.5 mm corner radius affect machining? The 15° relief reduces rubbing and supports efficient cutting engagement, while the 2.5 mm corner radius increases edge strength on the ADMT120425R-F56 WSP45G, making it more tolerant of interrupted cuts and deeper depths of cut. What milling strategies suit the parallelogram 85° geometry? Parallelogram 85° inserts are well suited to shoulder and face milling where side cutting and radial engagement are required; the ADMT120425R-F56 WSP45G’s shape helps to control cutting forces and maintain consistent chip evacuation. Is this insert suitable for standard cutter pockets and indexing routines? Yes, the ADMT120425R-F56 WSP45G follows common insert sizing and tolerance conventions (tolerance class M and thickness code 04), enabling repeatable seating and reliable indexing in compatible milling cutters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools is a global brand of precision cutting tools and part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for clarification of product origin only; there is no affiliation implied. The offered article is an original, factory-new product from the manufacturer.
ADMT120430L-F56 WKP35S T Wendeplatten - Walter Tools
Take advantage of the high-performance combination of Tiger·tec Silver coating and the WKP35S grade for reliable machining of steel and cast iron; the robust F56 chipbreaker and parallelogram form ensure consistent chip control and long tool life. Order the ADMT120430L-F56 WKP35S directly via Metav Werkzeuge or consult the team for application advice. ADMT120430L-F56 WKP35S Fräswendeschneidplatte by Walter Tools — Tiger·tec Silver, F56 chipbreaker The ADMT120430L-F56 WKP35S is a parallelogram milling insert designed for heavy-duty finishing and semi-finishing operations in steel and cast iron, combining a modern coating with a geometry optimised for stable chip formation. Tiger·tec Silver coating for high process security Optimised F56 chipbreaker for steel and cast iron Parallelogram 85° form with 15° relief 3 mm nose radius for robust edge strength High-efficiency machining with proven coating technology The insert benefits from the Tiger·tec Silver coating and the WKP35S grade, which together deliver stable chip formation and extended edge life when machining steel and cast iron. The coated cemented carbide substrate is engineered to withstand the thermal and mechanical loads typical of ISO P and K materials; this results in fewer tool changes and improved process reliability. The design supports consistent cutting conditions and helps maintain component tolerances during medium- to high-material-removal-rate applications. Geometry designed for chip control and surface quality The F56 chipbreaker and the parallelogram 85° form provide controlled chip flow and favourable cutting forces, reducing vibration and improving surface finish. The insert’s 15° relief angle lowers cutting temperatures and promotes predictable wear behaviour, while the 3 mm corner radius increases edge robustness under intermittent cutting conditions. These geometric features translate into measurable benefits: longer tool life, fewer interruptions, and steady component quality in industrial machining environments. Practical selection and reliable performance in production With tolerance class M and a standard insert size and thickness, this grade is a versatile choice for production shops seeking a balance between performance and cost-efficiency. The plate is suitable where predictable wear and repeatable performance are priorities; its combination of coating, grade and chipbreaker supports efficient machining cycles and contributes to reduced downtime. For complex material mixes involving unalloyed and alloyed steels as well as cast irons, the insert offers a pragmatic solution to maintain throughput and finish requirements. Contact Metav Werkzeuge for tailored cutting data and application recommendations on Walter Tools Tiger·tec Silver inserts or arrange procurement through Metav Werkzeuge. Technical Data Article number: ADMT120430L-F56-WKP35S-WALTER Name: Fräswendeschneidplatte ADMT120430L-F56 WKP35S Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 3 mm Plate form: Parallelogram 85° Tolerance class: M Plate size: 12 Plate thickness: 04 Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Applicable materials: P (steel), K (cast iron) Material base: coated cemented carbide Application: finishing and semi-finishing milling FAQ What materials is this insert suitable for? The ADMT120430L-F56 WKP35S insert is specified for steel (ISO P) and cast iron (ISO K), reflecting the WKP35S grade’s optimisation for these material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the Walter Tools insert reduces adhesive and abrasive wear, improving process stability and extending the effective cutting life in a range of steel and cast-iron applications. What does the F56 chipbreaker provide in practice? The F56 chipbreaker offers controlled chip formation and evacuation, which helps to lower cutting forces and enhance surface finish during finishing and semi-finishing operations. Is the insert suitable for interrupted cuts? Yes; the 3 mm corner radius and the robust coated carbide grade increase edge strength, supporting intermittent cutting conditions typically encountered in production milling. Can cutting data be provided for specific applications? Application-specific cutting data and recommendations are available; Metav Werkzeuge can advise on speeds, feeds and optimal machining strategies for the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for identification and explanatory purposes only and do not imply any affiliation with or endorsement by the brand owners. The offered item is an original, factory-new product of the manufacturer.
ADMT120430L-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of robust heat-resistant coating and a secure chipbreaker geometry for reliable milling of steels, stainless steels and high-temperature alloys, reducing downtime and ensuring consistent surface quality. Order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. ADMT120430L-F56 WSP45G milling insert, Tiger-tec Gold – 15° relief angle, parallelogram 85° (Walter Tools) A ADMT120430L-F56 WSP45G milling insert designed for versatile face and shoulder milling across Steel, stainless steel and superalloys/Titanium, combining a Tiger‑tec Gold PVD coating with a supportive chipbreaker for stable cutting Tiger‑tec Gold PVD coating for heat resistance Versatile grade WSP45G for P / M / S materials 15° relief angle for secure edge engagement Parallelogram 85° form with F56 chipbreaker Consistent cutting performance through advanced coating and grade The Tiger‑tec Gold coating and the WSP45G grade form the technical core that delivers stable cutting edges under thermal and mechanical stress. Designed for applications that generate significant heat, the coated carbide composition promotes controlled wear and reduced edge build-up, which translates into longer tool life and fewer interruptions. For shops that run mixed production batches, the insert’s adaptability to Steel, stainless steel and superalloys/Titanium reduces tool changes and simplifies inventory management. The result is more predictable cycle times and consistent surface finish without relying on complex parameter tuning. Secure chip control and geometry that supports process reliability The parallelogram geometry with an 85° cutting face and the F56 chipbreaker ensure reliable chip formation and evacuation in a wide range of cutting conditions. The combination of the 15° relief angle and a corner radius of 3 mm provides a balance between strength and sharpness: the cutting edge resists chipping during interrupted cuts while maintaining the ability to produce accurate contours. This geometry is particularly advantageous in shoulder milling and helical approaches where predictable chip flow reduces the risk of workpiece damage and tool breakage, thereby supporting higher machine uptime. Practical benefits for production and tool management With a standard insert size and a clear designation that matches industry ordering systems, the part integrates easily into existing tooling setups. The insert’s tolerance class M and the thickness code ensure interchangeability and repeatable seating in tool holders, which aids quick changeovers and reduces setup errors. By choosing this indexable insert, manufacturers benefit from a reduced total cost of ownership through fewer insert replacements and steadier process outputs. The engineering focus is on measurable improvements: fewer scrap parts, less rework and steadier cycle times for batch and continuous milling operations. Consider the Walter Tools Tiger‑tec Gold ADMT120430L‑F56 WSP45G for reliable, low‑maintenance milling; contact Metav Werkzeuge for tailored recommendations and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120430L-F56-WSP45G-WALTER Designation: ADMT120430L-F56 WSP45G Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Facts Size: 12 Thickness code: 04 Corner radius: 3 mm Relief angle: 15° Tolerance class: M Special features Chipbreaker: F56 Plate form: Parallelogram 85° Grade: WSP45G (PVD coated carbide) Material compatibility: Steel / rostfreier Stahl / Superalloys and Titanium Execution: T FAQ What materials is this insert suitable for? The ADMT120430L‑F56 WSP45G insert is specified for machining Steel, rostfreier Stahl (stainless steel) and heat‑resistant superalloys/Titanium, reflecting the WSP45G grade’s broad applicability. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating enhances thermal resistance and wear performance, helping the ADMT120430L‑F56 WSP45G maintain cutting edge stability under higher temperatures and prolonged operation. What benefit does the F56 chipbreaker provide? The F56 chipbreaker supports controlled chip formation and evacuation, reducing the risk of built‑up edge and ensuring consistent surface quality during face and shoulder milling. Is the relief angle important for interrupted cuts? Yes, the 15° relief angle helps secure the cutting edge during engagements and interrupted cuts, improving edge strength and reducing chipping on the ADMT120430L‑F56 WSP45G insert. Can this insert be used in standard toolholders? The insert follows common industry designations and tolerance class M, enabling straightforward integration into compatible toolholders designed for parallelogram inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
ADMT120430R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WKP35G grade for consistent wear control and predictable tool life in steel and cast iron machining; the insert’s 85° parallelogram geometry and F56 chipbreaker provide axial stability and improved chip formation. Order directly via Metav Werkzeuge or request advice from our consultants for application‑specific recommendations. ADMT120430R-F56 WKP35G milling insert — Tiger‑tec Gold grade for steel and cast iron (Walter Tools) The ADMT120430R-F56 WKP35G is a robust parallelogram 85° milling insert engineered for productive machining of steel (ISO group P) and cast iron (ISO group K), combining a high‑performance coating with a chipbreaker designed for stable cutting under industrial conditions. Tiger‑tec Gold coated grade WKP35G Optimised for steel and cast iron machining Parallelogram 85° geometry for axial stability 15° relief angle with 3 mm corner radius Extended tool life through advanced coating and grade The insert features Tiger‑tec Gold coating and the WKP35G grade, a coated cemented‑carbide combination developed to cope with the heat and abrasion typical of machining steel and cast iron. This surface technology reduces flank and crater wear, extending in‑service life and lowering the frequency of tool changes. For production environments that prioritise uptime, the improved wear resistance translates into fewer interruptions and more predictable maintenance windows, supporting long‑run efficiency and cost control. Geometry and chip control that stabilise the cut A parallelogram 85° form factor provides axial stability and effective engagement with the workpiece; together with the F56 chipbreaker this geometry promotes controlled chip segmentation and evacuation. The insert has a 15° relief angle and a 3 mm corner radius, which together balance edge strength and cutting forces to reduce vibration and preserve surface finish. These characteristics make the insert suitable for operations where steady cutting conditions and consistent dimensional results are required, particularly in high‑throughput milling processes. Process reliability and application scope Designed in accordance with ISO material groups P and K, the insert supports machining across a broad range of unalloyed and alloyed steels as well as various cast irons. The coated grade and chip control deliver process reliability, helping to maintain cutting performance even when conditions vary between batches. For engineering workshops and contract manufacturers seeking reproducible component quality, this insert provides a stable platform to build machining strategies with fewer variables and clearer performance expectations. Contact Metav Werkzeuge today to discuss how the Walter Tools Tiger‑tec Gold ADMT120430R-F56 WKP35G milling insert can be integrated into existing processes or to arrange a technical consultation with our specialists Technical Data SKU: ADMT120430R-F56-WKP35G-WALTER Article designation: ADMT120430R-F56 WKP35G Product type: Milling insert Brand: Walter Tools Core data Relief angle: 15° Corner radius: 3 Insert shape: Parallelogram 85° Insert size: 12 Thickness: 04 Tolerance class: M Features / Applications Series / coating: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F56 Material groups: P (steel), K (cast iron) Substrate: Coated cemented carbide FAQ What materials is this insert suitable for? The ADMT120430R-F56 WKP35G is intended for machining steel (ISO group P) and cast iron (ISO group K) as specified by the WKP35G grade and Tiger‑tec Gold coating. How does the F56 chipbreaker affect performance? The F56 chipbreaker on this insert improves chip formation and evacuation, supporting stable cutting and consistent surface finish when milling steel and cast iron. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances wear resistance and thermal stability, which increases tool life and maintains cutting performance under demanding production conditions for the ADMT120430R-F56 WKP35G. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and product names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands beyond product distribution. The offered item is original, factory‑new goods from the manufacturer.
ADMT120430R-F56 WKP35S W KP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, excellent chip control and the WKP35S coated carbide grade for consistent milling results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT120430R-F56 WKP35S — Fräswendeschneidplatte (Parallelogram 85°, 15° clearance) by Walter Tools ADMT120430R-F56 WKP35S is a parallelogram milling insert engineered for efficient steel and cast iron machining in a wide range of general milling operations Tiger·tec Silver coated carbide grade WKP35S Parallelogram 85° shape for versatile milling 15° clearance angle, 3 mm corner radius For steel and cast iron machining Coating and grade that extend tool life and throughput The Tiger·tec Silver coating combined with the WKP35S grade provides a robust, coated carbide structure that reduces abrasive wear under typical steel and cast iron cutting conditions. This surface technology is designed for stable chip formation and good adhesion resistance, which translates into longer tool life and fewer index changes in production. For operators seeking predictable performance, this combination improves mean time between tool changes and supports steady machining parameters, making the insert a reliable choice for repeated, high-volume cuts. Geometry tuned for controllable chips and repeatable surface quality The parallelogram 85° form together with the chipbreaker F56 delivers a balance between entry stability and chip control, especially in interrupted or general milling passes. The 15° clearance angle reduces rubbing at the flank while the 3 mm corner radius helps to maintain edge strength and consistent surface finish on the workpiece. These geometric decisions reduce the risk of chatter in many set-ups and support predictable results in batch production, so processes run with fewer quality deviations and less rework. Practical production benefits for process security and flexibility Specified in an M tolerance class and available in a compact 12 size, this indexable plate suits a broad spectrum of cutters and set-ups. Its suitability for both steel (P) and cast iron (K) applications enables stock rationalisation and faster tool planning across mixed-material jobs. The stable combination of grade and geometry promotes higher machining speeds with controlled wear behaviour, thereby increasing overall productivity and lowering per-part tooling cost. In short, the insert supports robust machining strategies where consistent results and efficient chip evacuation matter. For tailored advice on integrating the Walter Tools ADMT120430R-F56 WKP35S into production or to arrange delivery via Metav Werkzeuge contact +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants will recommend the optimal cutter and cutting data for the application Technical data Article number: ADMT120430R-F56-WKP35S-WALTER Product type: Fräswendeschneidplatte ISO designation: ADMT120430R-F56 WKP35S Grade/Sort: WKP35S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 3 mm Plate size: 12 mm Tolerance class: M Chipbreaker: F56 Special features Parallelogram 85° plate form Coating: Tiger·tec Silver Suitable for: steel (P) Suitable for: cast iron (K) Execution: T Material designation: P / K FAQ What materials can this insert machine effectively? The ADMT120430R-F56 WKP35S is designed for machining steel and cast iron, reflecting the P/K designation of the WKP35S grade. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade increases wear resistance and supports stable chip formation, which helps maintain consistent cutting performance and longer tool life. Is the geometry suitable for general-purpose milling? Yes; the parallelogram 85° shape combined with chipbreaker F56 and a 3 mm corner radius provides versatile performance across common milling tasks while improving chip control. Can the insert be used for interrupted cuts or tougher set-ups? The insert’s robust grade and geometry are suitable for many interrupted and standard heavy milling operations, offering reliable edge stability and process security. What tolerance and size information should be noted when specifying toolholders? The plate is supplied in M tolerance class and a 12 size; confirm compatibility with the intended cutter body and clamping system for optimal fit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned only for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand-new goods of the manufacturer.
ADMT120430R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of a combination of high wear resistance, secure chip control and a geometry engineered for stable clamping; order directly via Metav Werkzeuge or consult our technical team for material-specific cutting data. ADMT120430R-F56 WSM35G milling insert – Tiger·tec Gold for stainless steels and superalloys | Walter Tools A robust ADMT120430R-F56 WSM35G milling insert engineered for reliable machining of stainless steels and heat‑resistant superalloys, optimised for secure clamping and consistent chip formation Tiger·tec Gold coated for long tool life Optimised for stainless steels and superalloys Parallelogram 85° geometry for secure clamping Longer service life through advanced coating technology The Tiger·tec Gold coating combined with the WSM35G grade provides a wear‑resistant, coated‑carbide structure that reduces flank wear and delays edge breakdown during demanding operations. This material combination is particularly effective when machining ISO group M materials (rostfreie Stähle) and S group alloys (heat‑resistant superalloys and titanium), where thermal loads and adhesive tendencies can shorten tool life. The result is more predictable performance and fewer tool changes, which supports higher machine utilisation and lower per‑part costs. Geometry and edge design for secure, controlled cutting A parallelogram 85° plate form with a 15° relief angle and a corner radius 3 delivers a reliable seat and cutting‑edge orientation that resists chipping under heavy engagement. The integrated chipbreaker F56 is tuned for stable chip formation in tough materials, lowering the risk of built‑up edge and improving surface quality. These geometry choices favour shoulder and face milling operations where process security and repeatable surface finish are required. Process efficiency and consistent production results The indexable insert’s construction emphasises reproducible cutting behaviour and stable edge life, supporting efficient batch processing and reduced setup variability. Using a coated grade like WSM35G means a combination of thermal resistance and edge stability, which often leads to fewer interruptions for tool changes and smoothing of production flow. Metav Werkzeuge can provide additional cutting‑parameter recommendations to align the insert’s strengths with centre‑line speeds and feed rates in specific applications. Contact Metav Werkzeuge for tailored advice on the Walter Tools ADMT120430R-F56 WSM35G milling insert and request detailed cutting data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: ADMT120430R-F56-WSM35G-WALTER Name: ADMT120430R-F56 WSM35G Manufacturer: Walter Tools Product type: Milling insert (indexable) Facts Relief angle: 15° Corner radius: 3 Plate size: 12 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F56 Plate form: Parallelogram 85° Material suitability: M (stainless steels), S (superalloys/titanium) Series: Tiger·tec Gold FAQ Is this insert suitable for stainless steels and high‑temperature alloys? The ADMT120430R-F56 WSM35G insert is specifically designed for ISO group M (rostfreie Stähle) and S materials, combining the Tiger·tec Gold coating and the WSM35G grade to improve thermal resistance and edge stability during machining. What does the chipbreaker F56 provide in practice? Chipbreaker F56 promotes controlled chip formation and evacuation in demanding materials, reducing the likelihood of built‑up edge and improving surface finish when using this Walter Tools milling insert. How does the parallelogram 85° form affect clamping and cutting? The parallelogram 85° geometry ensures a secure seat and a favourable cutting angle for shoulder and face milling, contributing to reduced vibrations and consistent cutting forces with the ADMT120430R‑F56 design. Which operations benefit most from the WSM35G grade? Operations that involve interrupted cuts, high temperatures or sticky workpiece behaviour—typical in stainless steels and superalloys—benefit from the wear resistance and edge stability of the WSM35G grade and the Tiger·tec Gold coating. How does the corner radius influence surface quality? A corner radius of 3 helps distribute cutting forces and supports a more robust cutting edge, often improving surface finish and extending edge life under moderate to heavy cutting conditions. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
ADMT120430R-F56 WSM45X T Wendeplatten - Walter Tools
Take advantage of the combination of a coated cemented-carbide grade engineered for heat-resistant alloys, a parallelogram 85° form for precise shoulder milling and a 15° clearance angle for durable cutting edges; order directly via Metav Werkzeuge or contact our technical consultants for application advice. ADMT120430R-F56 WSM45X — Fräswendeschneidplatte (Parallelogram 85°, 15° clearance) »Walter Tools« The ADMT120430R-F56 WSM45X is a coated indexable milling insert designed for shoulder and side milling of stainless steels and heat‑resistant superalloys, offering high cutting-edge stability and reliable chip control Coated carbide grade WSM45X for tough materials Parallelogram 85° form for shoulder and side milling 15° clearance angle for stable cutting edges F56 chipbreaker optimised for stainless steel Long tool life through tailored grade and coating The WSM45X grade is a coated cemented carbide specifically formulated for machining stainless steels and heat‑resistant superalloys. Its composition prioritises heat resistance and stable chip formation, reducing the risk of built-up edge and frequent edge changes. In practice, this means longer intervals between indexing and lower tooling costs per component while maintaining consistent cutting performance under elevated temperatures. Geometry that improves surface quality and process reliability The parallelogram 85° form combined with a 15° clearance angle ensures controlled cutting engagement and predictable force direction, which contributes to a more consistent surface finish and reduced vibration in shoulder milling operations. The insert’s corner radius supports a defined cutting edge for transferable feed rates, permitting conservative process windows that favour repeatability and predictable component quality. Efficient handling and economic operation in production As an indexable insert, the item simplifies tool management: damaged edges can be rotated instead of replacing the whole cutter, lowering tool inventory costs and minimising machine downtime. The F56 chipbreaker is tuned for secure chip segmentation in ductile, work‑hardening materials, supporting steady chip evacuation and helping to avoid problematic entanglement at high feed rates. Recommended applications and material guidance This insert is suitable for applications where stainless steels and high‑temperature alloys demand robust cutting edges and consistent chip control. The design is particularly effective for shoulder milling and side milling operations in production and job‑shop environments where process stability and predictable tool life are decisive for throughput and part quality. For application-specific recommendations based on Walter Tools' coated grade WSM45X, contact Metav Werkzeuge for expert guidance and material-matched tooling solutions Technical data Article number: ADMT120430R-F56-WSM45X-WALTER Product type: Fräswendeschneidplatte Designation: ADMT120430R-F56 WSM45X Grade / series: WSM45X — Walter Schneidstoffsorte - Serie offen Execution: T Tolerance class: M Numbers / core technical data Shape: Parallelogram 85° Plate size: 12 mm Plate thickness: 4 mm Corner radius: 3 mm Clearance angle: 15° Chipbreaker: F56 Designs / special features Coated cemented carbide (WSM45X) Optimised for stainless steels and heat‑resistant superalloys Parallelogram form for shoulder and side milling F56 chipformer for improved chip control FAQ What materials is this insert suited for? The ADMT120430R-F56 WSM45X is specified for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and secure chip formation. How does the parallelogram 85° form benefit machining? The 85° form directs cutting forces suitably for shoulder and side milling, helping to achieve consistent surface quality and reduced tool vibration with the ADMT120430R-F56 WSM45X insert. What advantage does the F56 chipbreaker provide? The F56 chipbreaker on the ADMT120430R-F56 WSM45X promotes segmented chips and reliable evacuation when machining ductile, work‑hardening materials such as stainless steel. Is the insert available in different corner radii or thicknesses? The supplied SKU specifies a corner radius of 3 mm and a plate thickness equivalent to the designation; alternative geometries are available in other insert variants — please consult Metav Werkzeuge for options. Can this insert reduce overall tooling costs? By enabling multiple indexed edges and extending edge life through the WSM45X coated grade, the ADMT120430R-F56 WSM45X contributes to lower tooling cost per component and improved machine uptime. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
ADMT120430R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, precise geometry and efficient chip control for consistent milling performance. Order the (ADMT120430R-F56 WSP45G) directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT120430R-F56 WSP45G milling insert – Tiger·tec Gold, 15° clearance (Walter Tools) The ADMT120430R-F56 WSP45G is a parallelogram milling insert designed for versatile face and shoulder milling in steel, stainless steel and heat-resistant superalloys. Tiger·tec Gold PVD coating for long tool life Parallelogram 85° form for stable milling 15° clearance angle supports secure chip flow Suitable for steel, stainless and superalloys Consistent cutting performance through modern grade technology The insert is produced in the Tiger·tec Gold family and the WSP45G grade is a PVD-coated carbide designed for tough milling tasks. This combination ensures a balance between wear resistance and toughness, reducing unexpected edge failures when machining P / M / S workpiece groups (steel, stainless steel, and heat-resistant alloys). The geometry – Parallelogram 85° – stabilises cutting forces and supports predictable tool behaviour, which helps to maintain cycle times and part quality even under variable cutting conditions. Predictable tool life and process security A clearly engineered contact geometry and the WSP45G coating system deliver improved flank and crater wear resistance, promoting longer intervals between indexings. The insert’s tolerance class M supports reproducible seating and replacement, which contributes to process repeatability on production lines. Combined with a defined 3 mm corner radius and the grade’s thermal stability, the insert is especially suited to operations where a secure cutting edge and stable chip formation are essential for throughput and reduced scrap rates. Optimised chip control and surface results The integrated F56 chipbreaker is tailored for controlled chip shaping across a wide range of conditions, reducing re-cutting and improving surface finish. The 15° clearance angle assists chip evacuation and lowers rubbing on the flank, which supports consistent surface quality and less heat transfer to the cutting edge. For milling strategies that require a mix of engagement angles, the insert’s profile and radius help to balance strength and finish without compromise. Application guidance and selection support The product is available in size designation 12 and thickness code 04, executed in the T variant for secure clamping and stability. It is recommended for general-purpose to demanding milling in steel, rostfreier Stahl (stainless steel) and nickel/titanium-based alloys where chip control and edge security are priorities. For tailored cutting data or alternative grades within the Tiger·tec series, Metav Werkzeuge’s technical team can advise on cutting speeds, feeds and ideal insert usage to match specific machine and component requirements. Contact Metav Werkzeuge today to discuss the ADMT120430R-F56 WSP45G Tiger·tec Gold milling insert and find the optimal specification for the application – technical consultants are available by e-mail or phone. Technical data Article number: ADMT120430R-F56-WSP45G-WALTER Designation: ADMT120430R-F56 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling insert) Facts Size designation: 12 Thickness designation: 04 Corner radius: 3 mm Clearance angle: 15° Plate form: Parallelogram 85° Special features Grade series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F56 Material suitability: P / M / S Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT120430R-F56 WSP45G insert (Walter Tools) is developed for the ISO groups P, M and S, i.e. steel, stainless steel and heat-resistant superalloys/titanium. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold on the WSP45G grade provides enhanced wear resistance and thermal stability, which improves tool life and process reliability when using the ADMT120430R-F56 WSP45G insert. What is the significance of the 85° parallelogram form? The parallelogram 85° shape increases rigidity in shoulder and face milling, promoting stable cutting forces and better surface quality with the ADMT120430R-F56 WSP45G. Which chipbreaker should be selected for mixed cutting conditions? The integrated F56 chipbreaker on this Walter Tools insert was chosen to provide controlled chip formation across varied engagements, making the ADMT120430R-F56 WSP45G a versatile choice. Is the corner radius suitable for finishing passes? The 3 mm corner radius on the ADMT120430R-F56 WSP45G offers a compromise between strength and finish; it is more suited to semi-finishing and robust finishing rather than ultra-fine surface-only finishing. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original and supplied new by the manufacturer.
ADMT120432R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide and proven Tiger·tec Gold technology for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult their specialists for process optimisation. ADMT120432R-F56 WKP35G indexable milling insert for steel and cast iron — Parallelogram 85°, 3.2 mm radius — Walter Tools The ADMT120432R-F56 WKP35G is an indexable milling insert engineered for robust performance in milling applications on steel and cast iron, providing stable chip formation and reliable surface quality in diverse production environments. Tiger·tec Gold coating for extended tool life WKP35G coated carbide grade Parallelogram 85° geometry for stable milling 3.2 mm corner radius with 15° clearance High-performance grade for productive steel and cast-iron machining The insert is supplied in the WKP35G grade, a coated carbide formulation optimised for cutting both steel and cast iron according to ISO 513 groupings. The combination of substrate and the Tiger·tec Gold coating reduces flank and crater wear, which translates into more consistent cutting performance and fewer tool changes. For manufacturing planners this means predictable tool life and improved machine utilisation, helping to maintain cycle times and part tolerances in high-volume milling. Geometry engineered for stability and reliable chip control A parallelogram 85° insert shape and the integrated chipbreaker F56 work together to deliver controlled chip formation under interrupted and continuous cutting conditions. The insert’s 3.2 mm corner radius and 15° clearance support secure engagement and reduced vibration, which improves surface finish and repeatability in both finishing and semi-roughing passes. These geometric choices minimise edge chipping and ensure process security when facing variable workpiece conditions. Lower total machining costs through longer service intervals Thanks to the Tiger·tec Gold surface treatment and the wear-resistant grade, this indexable insert contributes to reduced tooling consumption and fewer machining interruptions. A stable cutting edge and consistent chip evacuation help to avoid unexpected scrap and rework, supporting a positive cost-benefit ratio across production runs. The result is a practical balance of high productivity and reduced lifecycle costs for scheduled operations. Integration and typical application scenarios Designed as a milling insert for a wide range of tool holders and cutter bodies, the component is suitable where reproducible performance on steel and cast iron is required. The design supports both roughing and finishing strategies depending on cutter geometry and process parameters; catalogue- and geometry-dependent applications determine the precise cutting window. For process engineers seeking to adapt cutting strategies, the insert’s predictable behaviour simplifies parameter selection and tool management. Contact Metav Werkzeuge for tailored application advice on the Walter Tools ADMT120432R-F56 WKP35G to optimise cycle times and maximise tool life Technical data SKU: ADMT120432R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT120432R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core specifications Clearance angle: 15° Corner radius: 3,2 mm Insert size: 12 Thickness: 04 Insert shape: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Materials & features Coating / Series: Tiger·tec Gold Grade: WKP35G Substrate / designation: P / K Suitable for: steel, cast iron Application: milling insert Execution: T FAQ What materials is this insert designed to machine? The ADMT120432R-F56 WKP35G insert is specified for machining steel and cast iron, reflecting the P and K material groups identified for the WKP35G grade. How does the Tiger·tec Gold coating benefit machining performance? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, which extends the usable life of the insert and supports consistent surface quality during extended production runs. What advantage does the parallelogram 85° shape provide? The parallelogram 85° geometry enhances tool rigidity and contact stability in milling operations, helping to reduce vibration and maintain a stable cutting edge for improved repeatability. Is the ADMT120432R-F56 WKP35G suitable for finishing operations? Yes, the combination of the 3.2 mm corner radius and controlled chip formation from the chipbreaker F56 makes the insert appropriate for both finishing and semi-roughing applications, depending on cutter assembly and process settings. How does the geometry support chip control in interrupted cuts? The insert’s chipbreaker design and clearance angle work together to break and evacuate chips reliably, reducing the risk of chip re-cutting and improving process security in interrupted milling conditions. Protected trademarks and product names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the listed brands. The article is an original, factory-new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT120432R-F56 WKP35S Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance and stable chip formation thanks to the Tiger·tec Silver coating and the WKP35S grade; ideal for machining steel and cast iron with consistent performance. Order directly via Metav Werkzeuge or consult the technical advisers for specific application guidance. ADMT120432R-F56 WKP35S milling insert — parallelogram 85° geometry, for steel and cast iron | Walter Tools The ADMT120432R-F56 WKP35S is a robust parallelogram 85° milling insert designed for productive finishing and roughing operations on steel and cast iron. Tiger·tec Silver coating for high wear resistance WKP35S grade optimised for steel and cast iron Parallelogram 85° geometry for stable cutting 15° relief angle with 3.2 mm corner radius Higher productivity through optimised grade and coating The combination of the WKP35S carbide grade and the Tiger·tec Silver coating provides a clear performance advantage during steel and cast iron machining. The encoded material pairing (P / K) indicates suitability for unalloyed and alloyed steel as well as abrasive cast iron. The coated hardmetal substrate is engineered to resist thermal and abrasive wear, which translates into longer tool life and fewer indexings per workpiece. For operations prioritising cycle-time reduction and repeatable surface quality, this pairing yields measurable efficiency gains and predictable component outcomes. Geometry that improves cutting stability and surface finish The parallelogram 85° insert geometry coupled with a 15° relief angle is configured to deliver reliable chip flow and low vibration during interrupted cuts. The 3.2 mm corner radius increases edge robustness and supports improved surface finish on medium to heavy passes. These geometrical choices reduce deflection and stabilise cutting forces, which is particularly beneficial in end milling and face milling where tool overhang or varying engagement can challenge process stability. The result is consistent dimensional accuracy and fewer scrap parts in production. Adapted to ISO-specific material groups and diverse applications Designed with ISO 513 material groups in mind, the insert is applicable across a wide range of workshop tasks. The P indication targets typical steel machining heat and chip-formation conditions, while the K rating addresses the abrasive nature and short, breaking chips of cast iron. This makes the insert suitable for both roughing and finishing sequences within a single production line, lowering tool change frequency. Explanation of terms and simple matching to workpiece material allows machining planners to make informed decisions without unnecessary trial runs. Practical integration and economic advantages With its standard insert designation and proven chipbreaker F56, the component integrates easily into established milling systems and indexable tool holders. The robust edge preparation and coating reduce unplanned downtime and support predictable maintenance intervals, contributing to lower per-part costs over production runs. The M tolerance class and execution code indicate consistent manufacturing quality, enabling repeatable performance across batches. For shops aiming to balance tool life, surface quality and throughput, this solution represents a pragmatic choice. Contact Metav Werkzeuge today to discuss toolholder compatibility and application-specific recommendations for this Walter Tools milling insert, and benefit from tailored machining advice. Technical data SKU: ADMT120432R-F56-WKP35S-WALTER Article designation: ADMT120432R-F56 WKP35S Product type: Fräswendeschneidplatte / milling insert Brand: Walter Tools Facts Size: 12 Thickness code: 04 Corner radius: 3.2 mm Relief angle: 15° Plate form: Parallelogramm 85° Chipbreaker: F56 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Material classification: P / K (steel and cast iron) Execution: T ISO designation present in article name FAQ Which materials are best machined with this insert? The ADMT120432R-F56 WKP35S insert (Walter Tools milling insert, SKU ADMT120432R-F56-WKP35S-WALTER) is optimised for steel (P) and cast iron (K) applications according to the product’s grade and coating characteristics. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating improves wear resistance and thermal stability, extending tool life and supporting consistent surface quality when machining demanding steels and abrasive cast irons. How does the parallelogram 85° geometry influence machining? The parallelogram 85° geometry increases cutting stability and offers a predictable chip flow, which helps reduce vibration and improves finish, especially in interrupted or variable-engagement cuts. Is the corner radius suitable for finishing passes? With a 3.2 mm corner radius, the insert delivers a robust edge that supports good surface finish while also providing resistance to edge chipping under heavier loads. What does the chipbreaker F56 mean for process planning? The F56 chipbreaker is configured to manage chip formation typical of steel and cast iron under the stated conditions, facilitating controlled chips and reducing the risk of entanglement in many milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120432R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
High-performance WSM35G grade combined with the Tiger‑tec Gold technology and a 15° clearance angle delivers secure chip formation and extended tool life when machining stainless steel and heat-resistant alloys; order the ADMT120432R‑F56 WSM35G milling insert directly via Metav Werkzeuge or consult our specialists for application support. ADMT120432R-F56 WSM35G milling insert — for stainless steel (Walter Tools) ADMT120432R-F56 WSM35G is a parallelogram‑form milling insert optimised for stable cutting and reliable chip control in stainless steel and high‑temperature alloys. Tiger‑tec Gold coating for long tool life WSM35G grade for stainless steel and superalloys 15° clearance angle for secure cutting performance 3.2 mm corner radius for robust edge stability Parallelogram 85° form with F56 chipbreaker Precise performance for stainless steel and demanding alloys The WSM35G grade, part of the Tiger‑tec Gold family, is a coated carbide developed for the specific demands of stainless steel (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). The engineered grade promotes consistent chip formation and reduces the risk of built‑up edge, which is critical when machining materials that tend to be work‑hardening and generate high cutting temperatures. The result is a measurable improvement in machining stability and a reduction in unplanned tool changes, supporting smoother production flow and predictable process windows. Geometry and chip control that protect the cutting edge The insert’s parallelogram 85° form combines with a 15° clearance angle and a 3.2 mm corner radius to deliver a balance between edge strength and cutting accessibility. The integrated F56 chipbreaker is designed to shape and evacuate chips reliably under variable feeds and depths of cut; this helps to avoid chip recutting and protects the cutting edge from thermal and mechanical overload. Explained simply: the geometry reduces flank contact and spreads cutting forces, which extends edge life and improves surface finish compared with blunt or improperly selected geometries. Designed for productivity, repeatability and easy integration Tolerance class M and the ADMT designation ensure that this insert can be used in common ADMT‑compatible milling cutters and clamping systems, offering repeatable positioning and minimal setup variation. The Tiger‑tec Gold coating increases wear resistance and helps maintain a stable cutting edge over longer tool life, which lowers the cost per component and increases uptime. For manufacturing environments focused on consistent output and reduced rework, the combination of grade, chipbreaker and robust geometry provides a reliable, production‑orientated solution from Walter Tools. For machining stainless steel with proven productivity, contact Metav Werkzeuge for tailored recommendations and availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ADMT120432R-F56-WSM35G-WALTER ISO designation: ADMT120432R-F56 WSM35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Chipbreaker: F56 Facts Clearance angle: 15° Corner radius: 3.2 mm Plate size: 12 Plate thickness: 04 Form angle: 85° Tolerance class: M Materials & features stainless steel (ISO group M) Superalloys and Titanium (ISO group S) Coated carbide (Tiger‑tec Gold) Parallelogram 85° form F56 chipbreaker Execution: T FAQ Is this insert suitable for stainless steel? Yes. The ADMT120432R‑F56 WSM35G milling insert (SKU ADMT120432R‑F56‑WSM35G‑WALTER) is specifically formulated for stainless steel and provides stable chip control and reduced built‑up edge risk. What does the WSM35G grade indicate? WSM35G denotes a Walter Tools coated carbide grade within the Tiger‑tec Gold family; it is optimised for wear resistance and thermal stability when machining stainless steel and heat‑resistant alloys. For which cutting tasks is the F56 chipbreaker recommended? The F56 chipbreaker is intended for general milling of tough materials where controlled chip formation and safe evacuation are priorities, offering a balance between small broken chips and surface integrity. Does this insert fit standard ADMT toolholders? The ADMT ISO designation indicates compatibility with toolholders designed for ADMT inserts; the parallelogram 85° form and tolerance class M support secure indexing and repeatable positioning. What production benefits can be expected from this insert? Using the ADMT120432R‑F56 WSM35G from Walter Tools typically results in longer tool life, improved process stability and more consistent surface finish when machining stainless steel and similar alloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new merchandise of the respective manufacturer.
ADMT120432R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G cutting grade and a robust 3.2 mm corner radius for consistent productivity and reduced tool changes; order directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. ADMT120432R-F56 WSP45G milling insert — Walter Tools, Tiger·tec Gold, for P/M/S applications The ADMT120432R-F56 WSP45G is a parallelogram milling insert designed for versatile face and shoulder milling in steels, stainless steels and heat‑resistant alloys. Tiger·tec Gold PVD coating Suitable for Steel, Stainless and Superalloys 15° clearance angle for secure cutting 3.2 mm corner radius for robust edge Maximise machining consistency and tool life with advanced coating technology The combination of Tiger·tec Gold coating and the WSP45G PVD cutting grade delivers a reliable balance between wear resistance and edge toughness. This specification reduces flank wear and supports stable chip formation, which in turn helps to maintain consistent surface finish and dimensional accuracy over longer tool life. The integrated chipbreaker F56 improves evacuation in interrupted cuts and varied feed conditions, translating into fewer insert changes and lower production interruptions. For shops prioritising uptime and repeatability, these properties lead directly to measurable productivity gains. Versatile geometry for fewer tool variants and faster set‑ups A parallelogram 85° shape combined with a 15° clearance angle and 3.2 mm corner radius offers a geometry that is easy to index and tolerant to modest set‑up deviations. These geometry choices provide secure cutting action and increased edge strength for heavier engagement or trochoidal milling approaches. The insert’s designation and form support use across the ISO material groups P / M / S — that is, unalloyed and alloyed steels, stainless steels and high‑temperature alloys or titanium — reducing the need to keep multiple specialised grades in stock and simplifying tooling logistics. Improve process economics through predictable performance By choosing an insert that emphasises both coating performance and edge stability, process windows remain wider and less sensitive to slight variances in machine condition or workpiece material. The WSP45G grade is formulated to resist build‑up edge on stainless steels and to maintain a stable cutting edge when machining heat‑resistant alloys, which helps to reduce rejects and rework. Consistent insert behaviour means fewer interventions on the machine tool, lower cost per component and better overall equipment effectiveness (OEE) for batch and single‑piece flow alike. Easy integration into existing tool systems and clear handling advantages As an indexable milling insert with established clamping geometries, this parallelogram plate integrates into standard tool holders and cutter bodies without special adapters. The ADMT120432R‑F56 WSP45G insert is suited to common milling strategies and can be employed for both roughing and finishing passes where a robust corner and stable chip control are required. For process planning, the chipbreaker and geometry simplify the explanation of expected behaviour: the chipformer reduces entanglement, while the corner radius balances edge strength and achievable surface finish, making programming and tooling decisions more straightforward. For specific application recommendations on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored cutting data and proven set‑ups via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120432R-F56-WSP45G-WALTER Name: ADMT120432R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 3.2 mm Insert size: 12 Thickness: 04 Shape: Parallelogram 85° Special features Chipbreaker: F56 Cutting grade: WSP45G (PVD-coated carbide) Material application: P / M / S Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The ADMT120432R‑F56 WSP45G insert is suitable for material groups P (steel), M (stainless steel) and S (heat‑resistant superalloys and titanium), as indicated by the WSP45G grade. What is the corner radius and why does it matter? The insert features a 3.2 mm corner radius; this radius increases edge strength for heavy cuts and improves tool life while still allowing acceptable surface finish for many milling operations. What clearance angle does the insert have? This parallelogram insert has a 15° clearance angle, which helps to reduce rubbing on the flank and supports secure chip removal during milling. Which chipbreaker is integrated and what is its benefit? The F56 chipbreaker is incorporated to support controlled chip formation and evacuation, especially useful in mixed‑material production runs and interrupted cutting. Is the insert coated and what advantage does that provide? The insert is supplied in the Tiger·tec Gold coating technology (WSP45G), a PVD coating that improves wear resistance while maintaining edge toughness for reliable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of Walter Tools.
ADMT120440L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, an F56 chipbreaker and an 85° parallelogram geometry for consistent chip control and longer tool life; order directly via Metav Werkzeuge or request application advice from the consultants. ADMT120440L-F56 WKP35G — Fräswendeschneidplatte for Steel and Cast Iron by Walter Tools The ADMT120440L-F56 WKP35G is a coated carbide milling insert engineered for productive milling of steel and cast iron, optimised for stable chip formation and repeatable machining results Tiger·tec Gold coating for improved tool life Optimised for steel and cast iron machining 85° parallelogram shape, 15° relief F56 chipbreaker for stable chip control Consistent machining performance for ferrous materials The insert delivers reliable cutting performance across common ferrous groups, being specified for ISO groups P (steel) and K (cast iron). The WKP35G grade, belonging to the Tiger·tec Gold series, combines a wear-resistant coated carbide substrate with a coating strategy tuned for the thermal and abrasive demands of these materials. This results in extended tool life and fewer insert changes during production, which reduces downtime and supports a more economical machining sequence. Geometry and chip control that increase productivity The 85° parallelogram form factor with a 15° relief gives a balanced entry angle for stable cutting forces and predictable tool engagement. Combined with the F56 chipbreaker, the geometry promotes controlled fragmentation of swarf in both long- and short-chipping conditions, improving surface finish and decreasing the risk of workpiece damage. The 4 mm corner radius contributes to robust edge strength for interrupted cuts and helps maintain dimensional accuracy under higher feed rates. Practical benefits for shop-floor integration Tolerance class M and the standardised ISO designation ease insert identification and replacement, simplifying inventory and tool management. The insert thickness and size provide a compact, rigid cutting edge that suits modern high-velocity milling strategies. For engineers seeking process reliability, the combination of grade, chipbreaker and form reduces the need for excessive parameter experimentation; documented starting values from Walter Tools can be used as a baseline for optimisation. Explanation of technical terms and application guidance The term chipbreaker refers to a machined or ground feature on the rake face that encourages chips to curl and break; F56 denotes the specific geometry tailored for chip control under medium to heavy cutting regimes. Tiger·tec Gold is Walter Tools' multilayer coating technology that enhances resistance to abrasive wear and adhesion-related damage at elevated temperatures. These features together enable efficient bulk material removal and stable finishing passes when machining steels and cast irons. For high-productivity milling with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for application-specific recommendations and availability at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: ADMT120440L-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT120440L-F56 WKP35G Walter Tools Manufacturer: Walter Tools ISO designation: ADMT120440L-F56 WKP35G Core dimensions Relief angle: 15° Corner radius: 4 mm Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Materials & special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Material suitability: P (steel) and K (cast iron) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The insert is suitable for steel (ISO group P) and cast iron (ISO group K); the WKP35G grade and Tiger·tec Gold coating are optimised for these material families. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes reliable chip fragmentation, which improves swarf evacuation and surface finish during both roughing and finishing operations. Is the geometry suitable for interrupted cuts? Yes, the 85° parallelogram form and 4 mm corner radius provide increased edge strength and stability for interrupted or semi-interrupted milling tasks. Can this insert be used at high cutting speeds? The coating system and grade are designed to manage thermal loads typical of steel and cast iron milling; process parameters should be adjusted according to machine capability and cutting conditions. How is the insert identified for replacement? Use the ISO designation ADMT120440L-F56 WKP35G and the article number ADMT120440L-F56-WKP35G-WALTER for precise identification and restocking. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120440L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of durable Tiger‑tec Gold coating and the versatile WSP45G grade together with a 15° clearance angle for stable, productive milling of steel, rostfreier Stahl and heat‑resistant alloys; order the ADMT120440L-F56 WSP45G directly via Metav Werkzeuge or ask the consultants for tailored support. ADMT120440L-F56 WSP45G milling indexable insert — Tiger‑tec Gold, Walter Tools The ADMT120440L-F56 WSP45G is a PVD‑coated milling insert engineered for versatile face and shoulder milling across a wide range of materials, combining wear resistance with consistent chip formation and reliable tool life. Tiger‑tec Gold PVD coating for long life WSP45G grade for versatile milling 15° clearance for secure chip flow Parallelogram 85° geometry for accuracy Increased process efficiency through advanced grade and coating The combination of the Tiger‑tec Gold family and the WSP45G grade yields a PVD‑coated carbide solution optimised for continuous production environments. This insert is designed to extend tool life and reduce downtime by improving wear resistance and maintaining a stable cutting edge under typical milling loads. The result is measurable gains in productivity and predictable tool behaviour, which supports planning and reduces unplanned tool changes. Reliable chip control and suitability for demanding materials Equipped with the F56 chipbreaker and formulated for use on steel, rostfreier Stahl and superalloys/titanium, this insert promotes reproducible chip formation and evacuation. The engineered chip control reduces the risk of build‑up on the cutting edge and helps maintain surface quality during interrupted and continuous cuts. For users seeking process security when working with tough or heat‑sensitive alloys, the WSP45G grade offers the necessary balance between toughness and wear resistance. Geometry that delivers repeatable accuracy and edge stability The parallelogram 85° shape combined with a 15° clearance angle and a corner radius 4 provides stable engagement and reliable positional accuracy when indexing. This geometry supports low‑vibration performance and consistent contact conditions, which translates into improved surface finish and dimensional repeatability. The insert thickness and form are tuned for common milling setups, making it straightforward to integrate into existing toolholders. Selection and integration for production environments As part of the Tiger‑tec Gold series, this insert fits toolrooms aiming for predictable cycle times and consistent component quality. Choosing the right insert grade and chipbreaker reduces trial‑and‑error and shortens setup times, particularly when standardising on a family of grades across machining centres. For application advice, cutting data or optimisation tips related to specific alloys, technical guidance is available to support implementation and process tuning. Contact Metav Werkzeuge to discuss cutting data, toolholder compatibility and how the Walter Tools ADMT120440L-F56 WSP45G insert can improve production consistency; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT120440L-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT120440L-F56 WSP45G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Core data Insert size: 12 Thickness: 04 Clearance angle: 15° Corner radius: 4 Shape: Parallelogramm 85° Chipbreaker: F56 Tolerance class: M Special features Grade: WSP45G (PVD, coated carbide) Material suitability: P / M / S (steel / rostfreier Stahl / superalloys & titanium) Execution: T Designed for consistent chip control and stable edge life Part of Tiger‑tec Gold family for productive milling FAQ What materials can this insert machine? The ADMT120440L-F56 WSP45G insert is specified for machining steel, rostfreier Stahl and superalloys/titanium, reflecting the intended application scope of the WSP45G grade. How does the Tiger‑tec Gold coating benefit operations? The Tiger‑tec Gold coating on this milling insert improves wear resistance and thermal stability, which helps prolong tool life and maintain consistent surface quality over longer runtimes. What geometric features support accuracy? The parallelogram 85° shape together with a 15° clearance and a corner radius of 4 deliver stable engagement, helping to reduce vibration and support repeatable dimensional accuracy with this milling insert. Is this insert suitable for high‑speed milling? The WSP45G grade and Tiger‑tec Gold coating are formulated to offer robust performance across varied cutting speeds; specific cutting data should be confirmed for the targeted operation and workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. It is an original factory‑new article of the manufacturer Walter Tools.
ADMT120440R-F56 WKP35G Wendeplatten - Walter Tools
Efficient machining of Stahl and Gusseisen is achieved through the combination of the Tiger‑tec Gold coating and the WKP35G grade, delivering consistent wear resistance and predictable tool life; the parallelogram 85° form and F56 chipbreaker ensure stable chip control and repeatable surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT120440R-F56 WKP35G – indexable milling insert, Tiger‑tec Gold, for Stahl and Gusseisen (Walter Tools) The ADMT120440R-F56 WKP35G is an indexable milling insert designed for versatile milling in Stahl and Gusseisen, combining a wear‑resistant grade with a geometry optimised for stable chip formation. Tiger·tec Gold coating for extended life Precision parallelogram 85° geometry F56 chipbreaker for reliable chip control Suited for Stahl and Gusseisen applications Maintain steady productivity with a wear‑resistant coating The combination of the Tiger‑tec Gold technology and the WKP35G carbide grade provides a high level of thermal and abrasive resistance, which translates directly into longer tool life and fewer indexings during production. Because the grade is a coated carbide, it tolerates the elevated temperatures and varied chip formation encountered when machining Stahl and Gusseisen, so cycle times remain predictable and tool changes are less frequent. This results in a measurable increase in machine uptime and contributes to process stability in both roughing and semi‑finishing operations. Accurate geometry that secures surface quality and chip control The insert’s parallelogram 85° form and 15° relief angle deliver reliable cutting edge engagement and a secure seating in compatible toolholders, while the 4 corner radius adds robustness for interrupted cuts and moderate depths of cut. The integrated F56 chipbreaker is engineered to produce consistent chip segmentation, reducing the risk of long, entangling swarf and improving evacuation from the cut. As a result, surface finish and dimensional repeatability are supported even under varying cutting conditions, reducing rework and inspection demands. Simple integration and reliable process performance With tolerance class M and execution T, the insert fits into standard indexable milling holders and aligns with common tool‑building practices to shorten setup times. The designation and dimensions allow straightforward replacement and inventory handling across batches. The grade’s focus on both Stahl and Gusseisen applications makes tooling strategies simpler: a single insert family covers a broad material range, lowering tooling complexity. For customers seeking application support or verification of suitability for a specific programme, Metav Werkzeuge’s consultants can assist with cutting data and holder selection to secure optimal performance and cost‑efficiency. Contact Metav Werkzeuge for tailored cutting data and to secure the ADMT120440R-F56 WKP35G for stable, high‑productivity milling in Stahl and Gusseisen Technical Data SKU: ADMT120440R-F56-WKP35G-WALTER Article: ADMT120440R-F56 WKP35G Product type: Indexable milling insert Series: Tiger‑tec Gold Grade: WKP35G Material application: P / K Manufacturer: Walter Tools Core dimensions Plate size: 12 Thickness: 04 Corner radius: 4 Relief angle: 15° Form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Execution: T Special features Coated carbide grade (beschichtetes Hartmetall) Designed for Stahl machining Designed for Gusseisen machining Stable chip control and predictable wear Suitable for roughing and semi‑finishing operations Series/grade description: Tiger‑tec Gold / WKP35G FAQ What materials is this insert suitable for? The ADMT120440R-F56 WKP35G is suitable for machining Stahl and Gusseisen, the WKP35G grade being optimised for the thermal and abrasive conditions typical of these material groups. How does the Tiger‑tec Gold technology benefit tool life? Tiger‑tec Gold coating increases wear resistance and thermal stability on the ADMT120440R-F56 WKP35G, which leads to longer service intervals and more consistent cutting performance. Which chipbreaker is integrated and what advantages does it provide? The insert features the F56 chipbreaker, engineered to produce predictable chip segmentation and good evacuation, reducing swarf‑related disruptions during milling. Is the insert compatible with standard toolholders? Yes, the geometry (parallelogram 85° form, tolerance class M, execution T) of this indexable milling insert matches common holders; confirmation for specific holders can be provided by Metav Werkzeuge. What benefits does the corner radius offer? The 4 corner radius on this insert increases edge strength for interrupted cuts and supports smoother transitions, improving surface finish and tool robustness in demanding operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT120440R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, controlled chip formation and a robust insert geometry for stable, productive milling cycles; order directly via Metav Werkzeuge or consult our specialists for process optimisation and application advice. ADMT120440R-F56 WKP35S milling insert — Parallelogram 85°, Tiger·tec Silver, Walter Tools ADMT120440R-F56 WKP35S is a parallelogram-shaped indexable milling insert designed for high-productivity machining of steel and cast iron in general milling operations Tiger·tec Silver coating for high wear resistance WKP35S grade optimised for Stahl and cast iron F56 chipbreaker for controlled chip formation 15° relief angle with 4 mm corner radius Longer tool life through advanced coating technology The combination of the Tiger·tec Silver coating and the WKP35S carbide grade gives a marked increase in tool life under typical milling conditions. The coating reduces abrasive and thermal wear, which means fewer insert changes and longer uninterrupted production runs. For operations that process steel and cast iron, this equates to lower tooling costs per workpiece and less machine downtime. The designation signals a coated carbide solution optimised for the heat and chip behaviour associated with these material groups. Stable chip control for safer, faster machining The F56 chipbreaker is engineered to produce predictable, segmented chips during milling, which reduces the risk of entanglement and improves evacuation in continuous processes. Combined with the parallelogram shape and the Parallelogram 85° geometry, the insert facilitates secure clamping in standard tool holders and a stable cutting engagement. In practical terms, this means higher feed rates are feasible while maintaining process reliability and surface integrity on the workpiece. Geometry tuned for precision and repeatability A 15° relief angle paired with a 4 mm corner radius provides a balance between edge strength and dimensional control. The corner radius supports robust cutting edges for interrupted cuts and roughing passes, while the relief angle helps reduce rubbing and built-up edge. This geometry supports consistent component tolerances and predictable tool behaviour across batches, aiding in first-pass accuracy and reducing secondary operations. Application scope and process guidance The insert is specified for machining in the ISO groups P (for steel) and K (for cast iron). The coated carbide composition and chipbreaker choice make it suitable for a broad range of steels—from unalloyed to alloyed grades—and for abrasive, brittle cast-iron materials where short, breaking chips are common. For best results, select a matching cutter body rated for parallelogram-shaped inserts and follow the holder manufacturer’s recommendations for speeds and feeds based on workpiece alloy and rigidity. For secure procurement and application advice on Walter Tools inserts such as this ADMT120440R-F56 WKP35S, contact Metav Werkzeuge for tailored recommendations and ordering support Technical data Article number: ADMT120440R-F56-WKP35S-WALTER Designation: ADMT120440R-F56 WKP35S Brand: Walter Tools Core data Relief angle: 15° Corner radius: 4 mm Insert size: 12 Thickness designation: 04 Chipbreaker: F56 Tolerance class: M Shape: Parallelogram 85° Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Suitable for: Stahl (ISO P), cast iron (ISO K) Series: Tiger-tec Silver FAQ What materials is this insert suitable for? The ADMT120440R-F56 WKP35S insert is intended for machining steel (ISO P) and cast iron (ISO K); the WKP35S grade and Tiger·tec Silver coating are matched to those material groups. What does the F56 chipbreaker do? The F56 chipbreaker promotes controlled, segmented chips to improve evacuation and reduce the risk of chip-related interruptions when using the ADMT120440R-F56 WKP35S in continuous milling operations. How does the Tiger·tec Silver coating benefit productivity? Tiger·tec Silver minimises abrasive and thermal wear, extending insert life and enabling longer production runs with consistent cutting performance for inserts such as the ADMT120440R-F56 WKP35S. Is the geometry suited for interrupted cuts? Yes, the combination of a 15° relief angle and a 4 mm corner radius gives the insert robust edge strength, making it appropriate for interrupted and heavy milling passes. Which series and grade does this insert belong to? This is part of the Tiger-tec Silver series and uses the WKP35S coated-carbide grade, specifically formulated for a broad range of Stahl and cast-iron applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
ADMT120440R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for secure machining of stainless steels and heat-resistant superalloys; the insert’s parallelogram 85° form and F56 chipbreaker provide reliable chip control and repeatable performance. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. ADMT120440R-F56 WSM35G milling indexable insert — Tiger·tec Gold for stainless steels and superalloys (Walter Tools) The ADMT120440R-F56 WSM35G is a milling indexable insert engineered for demanding machining of rostfreier Stahl and heat-resistant superalloys, combining a robust coated carbide grade with a geometry optimised for stable cutting. Tiger·tec Gold coating for thermal and wear resistance WSM35G grade for stainless steels and superalloys Parallelogram 85° form for secure clamping F56 chipbreaker for controlled chip formation Maximise process stability with a temperature‑resistant coating The insert’s Tiger·tec Gold coating provides enhanced thermal protection and wear resistance during interrupted cuts and elevated cutting temperatures. This coated carbide technology reduces flank wear and supports consistent cutting forces, which translates into fewer tool changes and improved machine uptime. For applications involving rostfreier Stahl the coating assists in preventing build‑up at the edge, supporting a stable cutting edge and more predictable component quality. Reliable edge life and predictable chip control The WSM35G grade is formulated for the mechanical and thermal challenges of stainless steels and superalloys (ISO groups M and S). Combined with the F56 chipbreaker, this grade promotes secure chip formation and evacuation, reducing the risk of edge collapse and surface damage. The result is a measurable improvement in productivity when machining sticky, work‑hardening materials, offering an economical balance between tool life and cutting performance. Geometry designed for secure clamping and repeatability The parallelogram 85° plate form and the specified clearance angle of 15° deliver a stable seating and positive engagement in most milling cutters. The design enhances radial cutting stability and helps maintain a consistent cutting line during heavy engagement. The insert’s tolerance class M and the defined corner radius support repeatable indexing and accurate pocket fit, making fixture setup and tool changes straightforward in production environments. Application scope and material compatibility explained This indexable plate is intended primarily for machining rostfreier Stahl and high‑temperature alloys; the designation S / M indicates suitability for heat‑resistant superalloys and stainless steels per ISO 513 classifications. Where workpieces exhibit high ductility or poor thermal conductivity, the combination of grade, coating and chipbreaker assists in controlling contact temperatures and preserving the cutting edge—leading to consistent surface finish and dimensional stability in series production. Contact Metav Werkzeuge for specific recommendations, availability and compatibility checks for Walter Tools ADMT120440R-F56 WSM35G — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: ADMT120440R-F56-WSM35G-WALTER ISO designation: ADMT120440R-F56 WSM35G Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Product type: Milling indexable insert Form: Parallelogramm 85° Chipbreaker: F56 Core specifications Size: 12 Thickness: 04 Corner radius: 4 Clearance angle: 15° Tolerance class: M Material suitability: S / M Features Coating: Tiger·tec Gold Suitable for: rostfreier Stahl and heat‑resistant superalloys Application focus: heavy or difficult‑to‑machine materials Execution: T FAQ What materials is this insert suitable for? The ADMT120440R-F56 WSM35G is specified for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting its S / M suitability. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on this Walter Tools insert increases thermal resistance and wear protection, improving edge life during elevated temperature machining. How does the F56 chipbreaker affect machining? The F56 chipbreaker offers controlled chip formation and evacuation, which helps maintain stable cutting forces and reduces the risk of build‑up and surface defects. Which geometry ensures secure holder engagement? The parallelogram 85° form together with a 15° clearance angle gives a positive seat and good clamping stability for repeatable milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120440R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of WSM45X coated carbide for tough materials, a F56 chipbreaker for controlled chip formation and the stable parallelogram 85° geometry to maintain productivity in stainless and high-temperature alloy milling; order directly via Metav Werkzeuge or consult our specialists for application support. ADMT120440R-F56 WSM45X Fräswendeschneidplatte by Walter Tools — F56 chipbreaker, 15° clearance, 4 mm corner radius The ADMT120440R-F56 WSM45X is a parallelogram-shaped indexable milling insert designed for heavy-duty machining of stainless steels and heat-resistant alloys in industrial milling operations WSM45X coated carbide for tough alloys Parallelogram 85° geometry for versatile milling 15° clearance angle for stable cutting F56 chipbreaker for controlled chip formation Efficient cutting for tough, heat‑generating materials The WSM45X grade is a coated carbide designed specifically for machining materials that tend to produce built-up edge and high cutting temperatures. As such, the insert offers stable chip formation and improved edge life when facing the demands of rostfrei (stainless) grades and superalloys. The combination of coating and substrate reduces wear and supports longer tool life, translating into fewer tool changes and higher process uptime for production environments where consistency is essential. Geometry that supports reliable milling performance The parallelogram 85° geometry with a 15° clearance delivers a stable engagement angle for face and shoulder milling, while the corner radius 4 helps distribute cutting forces to avoid premature chipping. The F56 chipbreaker is engineered to break and evacuate chips efficiently during interrupted cuts and when machining ductile, work‑hardening materials. Together, these design elements promote predictable results and a regular surface finish, reducing the need for rework in assembly or downstream operations. Practical benefits for workshop productivity Integrating this insert into milling cutters offers measurable gains: improved process reliability when handling challenging alloys, reduced frequency of tool replacement thanks to the WSM45X grade, and better chip control due to the tailored chipbreaker geometry. For manufacturers aiming to raise throughput without compromising finish quality, the insert supports steady cutting conditions and repeatable performance across batches — an advantage in both prototyping and serial production. Material suitability and application overview The insert is recommended for stainless steels and for heat‑resistant superalloys and titanium alloys where thermal resistance and edge stability are critical. The combination of substrate and coating in the WSM45X grade is suited to the specific demands of these ISO material groups, helping to mitigate common issues such as edge build‑up and rapid flank wear. Operators and process engineers will find the insert particularly useful where consistent tool life and chip control are priorities. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools inserts into the machining process — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutter compatibility and optimal cutting parameters Technical data SKU: ADMT120440R-F56-WSM45X-WALTER Article designation: ADMT120440R-F56 WSM45X Manufacturer: Walter Tools Core data Plate size: 12 Plate thickness: 04 Corner radius: 4 Clearance angle: 15° Plate form: Parallelogramm 85° Tolerance class: M Special features Coating: coated carbide (WSM45X) Chipbreaker type: F56 Series: Walter Schneidstoffsorte - Serie offen Suitable for: stainless steels; heat‑resistant superalloys and titanium (ISO groups M and S) Material designation: S / M FAQ Which materials are suitable for this insert? The ADMT120440R-F56 WSM45X insert is intended for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and edge resistance for such materials. What advantages does the WSM45X grade provide? WSM45X is a coated carbide grade optimised for stable chip formation and improved wear resistance when machining tough, heat‑generating materials, extending effective tool life. How does the F56 chipbreaker affect machining? The F56 chipbreaker controls chip shape and evacuation during interrupted or ductile cutting, reducing entanglement and improving surface quality. Is the geometry suitable for general milling cutters? Yes; the parallelogram 85° geometry with a 15° clearance provides a versatile stance for face and shoulder milling, balancing entry forces and chip flow for productive cuts. Can this insert be used on titanium alloys? The insert is suitable for heat‑resistant superalloys and titanium when processed under appropriate cutting parameters; the WSM45X grade supports edge stability in such applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120440R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the durable Tiger·tec Gold coating and a robust 4 mm nose radius for extended tool life and steady chip formation; combined with the Parallelogram 85° geometry this insert supports reliable milling cycles. Order the ADMT120440R-F56 WSP45G milling insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. ADMT120440R-F56 WSP45G milling insert — Tiger·tec Gold, Walter Tools The ADMT120440R-F56 WSP45G is a PVD-coated milling insert designed for versatile machining tasks across steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating for durability Suitable for steel, stainless steel and superalloys Parallelogram 85° form with 15° relief 4 mm nose radius for robust cutting edge Engineered for consistent performance and longer tool life This PVD-coated grade from the Tiger·tec Gold family delivers consistent wear resistance and thermal stability. The WSP45G carbide formulation is tailored to the thermal and mechanical demands of milling operations on steel, stainless steel and superalloys, reducing the risk of build-up and premature flank wear. The integrated F56 chipbreaker promotes controlled chip formation, which lowers cycle interruptions and contributes to more predictable machining results. Engineers and production planners will value the balance between edge stability and versatility that this insert provides. Faster, more reliable machining through optimised geometry The insert’s Parallelogram 85° shape and 15° relief angle offer reliable entry and exit behaviour in radial and axial milling passes, while the 4 mm nose radius supports higher feed rates and smoother surface finishes where a robust cutting edge is required. Together these features improve process stability and can reduce the frequency of tool changes, supporting higher overall equipment effectiveness. For workshops targeting repeatable part quality, the geometry and chip control features translate directly into improved throughput and lower rework rates. Practical compatibility and application guidance Designed for use in standard indexable milling toolholders that accept parallelogram inserts, this grade suits a wide range of general and demanding milling tasks. The ADMT120440R-F56 WSP45G excels where a combination of toughness and heat resistance is needed, for example in interrupted cuts or workpieces with variable material batches. For selection and cutting parameter advice, pairing the insert’s characteristics with appropriate cutter types and coolant strategies yields the best outcomes; Metav Werkzeuge’s consultants can advise on specific toolholder pairings and feeds to match production goals. Contact Metav Werkzeuge for tailored tool recommendations and to secure Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120440R-F56-WSP45G-WALTER Designation: ADMT120440R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Core data Form: Parallelogram 85° Relief angle: 15° Corner radius: 4 mm Size: 12 Thickness: 04 Tolerance class: M Chipbreaker: F56 Material code: P / M / S Features & applications PVD-coated carbide (Tiger·tec Gold) Suitable for steel, stainless steel and superalloys Robust cutting edge and stable chip control Versatile for various milling operations FAQ What materials is this insert suitable for? The ADMT120440R-F56 WSP45G is specified for machining steel, stainless steel and heat-resistant superalloys, reflecting the P / M / S designation of the Tiger·tec Gold grade. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT120440R-F56 WSP45G promotes controlled chip formation and evacuation, improving process stability and reducing interruptions in continuous milling operations. Which cutter geometry suits this insert? Parallelogram-style cutter bodies that accept 85° inserts are the recommended match; the insert’s Parallelogram 85° shape and 15° relief deliver stable engagement for radial and axial milling passes. Is this insert a good choice for interrupted cuts? Yes—the combination of the Tiger·tec Gold coating and the 4 mm nose radius on the ADMT120440R-F56 WSP45G supports toughness and edge stability required for interrupted or variable-cut conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names mentioned are the property of their respective owners. Brand names are used for explanation only and do not indicate any affiliation between our company and the respective manufacturers. The offered item is original, brand-new goods of the manufacturer (Walter Tools).
ADMT160608L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold cutting grade and the WKP35G wear resistance together with precise chip control from the F56 breaker for dependable productivity. Benefit from the parallelogram 85° geometry and 15° clearance for stable engagement and consistent surface finish; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADMT160608L-F56 WKP35G milling insert — Parallelogram 85°, 15° clearance | Walter Tools The ADMT160608L-F56 WKP35G is a solid, indexable milling insert engineered for efficient machining of steel and cast iron in general milling applications. Tiger·tec Gold for extended tool life WKP35G grade tuned for steel and cast iron Parallelogram 85° geometry for stable cutting F56 chipbreaker for controlled chip formation High-performance grade for demanding materials The ADMT160608L-F56 WKP35G combines the Tiger·tec Gold coating technology with the WKP35G carbide grade to provide a durable cutting edge suited to ISO groups P (steel) and K (cast iron). This composition ensures improved wear resistance and consistent edge integrity under typical milling temperatures. The result is fewer indexings and longer intervals between tool changes, which supports higher throughputs and lowers per-part tooling cost. Geometry that increases process stability and surface quality The insert’s parallelogram 85° shape and 15° clearance promote a predictable cutting angle and reduced radial forces during engagement. A 0.8 mm corner radius supports a balance between robustness and the ability to generate a good surface finish, while the plate size code 16 and thickness code 06 are compatible with common milling body interfaces. These geometric choices contribute to stable chip formation and improved dimensional consistency on the workpiece. Controlled chip flow for reliable productivity Equipped with the F56 chipbreaker, the insert is designed to split and evacuate chips efficiently when machining steels and cast irons. Controlled chip formation reduces the risk of re-cutting and tool interference, leading to fewer interruptions and a smoother production rhythm. Process security is enhanced by the repeatable behaviour of the chipformer, which supports predictable cycle times and stable tool life. Practical advantages for workshop operations Selection of this indexable insert supports efficient machine utilisation: the combination of grade, coating and chipbreaker reduces wear-related downtime, and the insert geometry eases programming and fixture demands. For shops seeking to standardise tooling across mixed steel and cast-iron jobs, the insert offers a pragmatic compromise between wear performance and cutting stability. If additional technical details or specific application data are required, Metav Werkzeuge provides dedicated advice and material-specific recommendations. Contact Metav Werkzeuge for application-specific recommendations and to secure Tiger·tec Gold inserts from Walter Tools Technical data Article number: ADMT160608L-F56-WKP35G-WALTER Designation: ADMT160608L-F56 WKP35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Facts Plate size: 16 Thickness code: 06 Free angle: 15° Plate form: Parallelogramm 85° Corner radius: 0.8 Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Tolerance class: M Substrate/coating: coated carbide Material suitability: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suitable for? The ADMT160608L-F56 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for a range of steels and cast irons. Which chipbreaker is integrated and what is its benefit? The insert features the F56 chipbreaker, which is designed to produce short, controlled chips and improve evacuation during milling operations. How does the Tiger·tec Gold series affect tool life? Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and edge stability, which typically extends the productive life of the insert under standard machining conditions. What advantages does the parallelogram 85° form provide? The parallelogram 85° geometry offers a stable cutting engagement and favourable force distribution, contributing to improved surface finish and reduced vibration. Is the insert compatible with common milling bodies? The plate size code 16 and thickness code 06 align with widespread holder designs; compatibility should be confirmed against the specific toolholder drawing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned here for explanatory purposes only; no affiliation between our company and those manufacturers is implied.
ADMT160608L-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of productivity, reliable chip control and consistent tool life for stable milling results; the technical design minimises machine downtime and simplifies process planning — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160608L-F56 WKP35S indexable milling insert, Tiger‑tec Silver, for steel & cast iron — Walter Tools The ADMT160608L-F56 WKP35S is an indexable milling insert engineered for productive face and shoulder milling of steel and cast iron, combining a Tiger‑tec Silver coating with a dedicated F56 chipbreaker for dependable chip control. Tiger‑tec Silver coated carbide grade WKP35S Effective F56 chipbreaker for dependable chips 15° relief angle for stable cutting geometry Parallelogram 85° form with 0.8 mm corner radius Stable machining performance for steel and cast iron The combination of Tiger‑tec Silver coating and the WKP35S grade provides a balance between wear resistance and toughness that suits the thermal and mechanical demands of machining steel (P) and cast iron (K). The integrated F56 chipbreaker is configured to produce controlled, less tangled chips during typical cutting conditions, reducing the risk of rework and improving process reliability. This geometry and coating pairing helps maintain consistent cutting forces, which contributes to predictable tool life and more repeatable part quality in batch and serial production. Improved edge life and process security through geometry and coating A 15° relief angle combined with the parallelogram 85° form gives a robust cutting edge orientation that resists chipping under intermittent loads, while the 0.8 mm corner radius provides a compromise between edge strength and surface finish. The coated cemented carbide substrate resists abrasive wear and sustains the cutting edge at elevated temperatures, resulting in fewer tool changes and more stable cycle times. For operations where machining stability and repeatable performance are priorities, this insert supports a high degree of process control and reduced scrap rates. Practical integration and productivity gains on the shop floor The insert’s standard form and dimensional coding facilitate straightforward replacement in compatible toolholders, enabling rapid index changes and minimal setup time. By focusing on reliable chip formation and robust edge geometry, the design supports higher material removal rates without compromising surface integrity. For production planners, the predictable behaviour of the grade and chipbreaker simplifies feed and speed selection and lowers the risk associated with introducing new programs. For operators, the familiar geometry shortens setup learning curves and reduces variation between shifts. Choose the Walter Tools ADMT160608L-F56 WKP35S when consistent chip control and dependable tool life are required — contact Metav Werkzeuge for detailed application advice and availability Technical data Article number: ADMT160608L-F56-WKP35S-WALTER Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Plate size: 16 Plate thickness: 06 Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger‑tec Silver Material base: coated cemented carbide Applicable material groups: P (steel), K (cast iron) Execution: T ISO designation: ADMT160608L-F56 WKP35S FAQ Which materials is this insert suitable for? The ADMT160608L-F56 WKP35S is specified for machining steel (P) and cast iron (K) according to the ISO material groups noted for the grade. What chip control can be expected from the insert? The F56 chipbreaker on this insert is designed to deliver reliable chip formation and evacuation for common turning and face-milling conditions in its target material groups. How does the geometry affect edge stability and finish? The parallelogram 85° form with a 0.8 mm corner radius and 15° relief angle increases edge robustness under varying loads while supporting consistent surface quality where moderate radii are suitable. What is the coating and how does it influence performance? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, improving consistency of edge life across series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no association between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer Walter Tools.
ADMT160608L-F56 WSP45G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WSP45G grade and a robust parallelogram 85° geometry to achieve reliable chip control and extended tool life in mixed-material milling. Order the ADMT160608L-F56 WSP45G milling insert directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT160608L-F56 WSP45G milling insert — Tiger·tec Gold, for steels, stainless steels and superalloys (Walter Tools) The ADMT160608L-F56 WSP45G is a parallelogram milling insert designed for versatile finishing and roughing operations in steels, stainless steels and heat-resistant superalloys, combining a 15° clearance and an optimised chipbreaker for stable machining Tiger·tec Gold PVD coating Suitable for steel, stainless steels and superalloys Parallelogram 85° for axial reach Stable cutting edge and chip control Consistent performance across mixed materials The combination of the Tiger·tec Gold coating with the WSP45G grade creates a wear-resistant surface that supports stable cutting edges under varying thermal loads. This makes the insert particularly effective when machining groups P, M and S — that is, unalloyed and alloyed steel, stainless steel and superalloys or titanium. The PVD-layering increases heat resistance and reduces adhesion at the cutting edge, which translates into more predictable tool life and reduced downtime. For process planners, the result is improved component consistency and fewer in-process interruptions. Geometry that promotes process stability and chip control The parallelogram shape at an 85° lead angle together with a 15° clearance ensures good axial reach and favourable cutting direction for shoulder milling and light face operations. The 0.8 mm corner radius increases edge strength for interrupted cuts and helps avoid premature chipping, while the F56 chipbreaker supports controllable chip formation in a wide range of feeds. These geometry choices reduce vibration sensitivity and improve surface finish, which supports higher first-pass yields in production environments. Economical machining through advanced grade and tooling concept The WSP45G grade is engineered as a tough, versatile PVD-coated carbide suitable for a broad spectrum of milling applications. Its formulation balances toughness and wear resistance to suit both finishing and medium-duty roughing, thereby offering a rentable compromise between performance and cost per part. The insert’s tolerance class M and consistent dimensional stability support repeatable clamping and predictable tool offsets, which aids CAM programmers and shop-floor operators in maintaining cycle-time targets. Contact Metav Werkzeuge for application advice, availability and ordering of Walter Tools' ADMT160608L-F56 WSP45G milling insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ADMT160608L-F56-WSP45G-WALTER Designation: ADMT160608L-F56 WSP45G Manufacturer: Walter Tools Facts Plate size: 16 Plate thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Grade: WSP45G (Tiger·tec Gold) Chipbreaker: F56 Execution: T Material applicability: P / M / S Series: Tiger·tec Gold FAQ What materials can this insert machine effectively? The ADMT160608L-F56 WSP45G milling insert (Walter Tools, SKU ADMT160608L-F56-WSP45G-WALTER) is suitable for machining steel (P), stainless steels (M) and heat-resistant superalloys or titanium (S). How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating on the WSP45G grade reduces adhesion and improves thermal resistance, which contributes to longer edge life and more consistent process windows when using the insert. Which operations are best suited to the parallelogram 85° form? The parallelogram 85° geometry is advantageous for axial reach and shoulder milling tasks; it provides a favourable cutting direction for face and light profile milling with the ADMT160608L-F56 design. What is the significance of the 0.8 mm corner radius? A corner radius of 0.8 mm increases edge strength for interrupted cuts and improves resistance to chipping, helping to maintain surface quality and reduce unexpected tool changes. Is this insert supplied by a known tooling brand? The insert is a Walter Tools product from the Tiger·tec Gold series; Walter Tools is known for precision tooling and process-oriented solutions. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160608R-D56 WAK15 Wendeplatten - Walter Tools
Benefit from productive machining of non‑ferrous materials with a combination of sharp WAK15 uncoated carbide, a D56 chipbreaker and a 15° relief angle that reduces built‑up edge and boosts cycle times; order directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160608R-D56 WAK15 milling insert — Parallelogram 85°, 0.8 mm radius, Walter Tools ADMT160608R-D56 WAK15 is a milling indexable insert engineered for efficient machining of aluminium and other non‑ferrous metals in high‑productivity environments Parallelogram 85° geometry for lateral stability WAK15 uncoated carbide for aluminium machining D56 chipbreaker for clean chip formation 0.8 mm corner radius for improved edge life Maximise aluminium removal with an optimised cutting edge The ADMT160608R-D56 WAK15 insert combines a very sharp geometry and an uncoated carbide grade developed for non‑ferrous materials, producing low friction and minimised material adhesion. The 15° relief angle and the targeted rake design reduce the tendency for built‑up edge, which maintains cutting performance across longer runs and reduces secondary finishing. These technical choices translate into faster cycle times and predictable tool life when machining aluminium alloys and similar materials. Consistent surface quality and reliable edge behaviour The parallelogram 85° geometry and a 0.8 mm corner radius deliver stability at the cutting zone and a balanced engagement with the workpiece. This leads to reduced vibration and a more uniform surface finish on the component. The D56 chipbreaker is tuned for segmented, manageable chips in soft, ductile materials, supporting uninterrupted production and easier chip evacuation. Tolerance class M and the Walter N‑Series system ensure repeatable performance across tool changes and lot batches. Practical handling, inventory and process benefits As part of the Walter N‑Sortensystem, this insert simplifies tool selection for shops focused on non‑ferrous work. The standardised designation eases logistics and reordering, while the insert’s geometry reduces the need for complex setup or frequent regrinds. For production managers the result is lower downtime, fewer rejects and a more economical overall process; for operators the combination of clean chips and a stable cutting edge reduces manual intervention and cleanup between operations. Contact Metav Werkzeuge for a technical consultation on suitability for specific aluminium components or to confirm stock availability — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: ADMT160608R-D56-WAK15-WALTER Label: Fräswendeschneidplatte ADMT160608R-D56 WAK15 Walter Tools Product type: milling indexable insert ISO designation: ADMT160608R-D56 WAK15 Brand: Walter Tools Dimensions & Core Data Plate size: 16 mm Corner radius: 0.8 mm Relief angle: 15° Thickness designation: 06 Plate form: Parallelogram 85° Tolerance class: M Materials & Features Grade: WAK15, uncoated carbide Chipbreaker: D56 Series: Walter N‑Sortensystem Intended application: aluminium and non‑ferrous metals Material designation: N (non‑ferrous) Execution: T FAQ What materials is this insert best suited for? The ADMT160608R-D56 WAK15 insert is specifically designed for aluminium and other non‑ferrous metals, using the WAK15 carbide grade to limit material adhesion and ensure stable cutting. How does the D56 chipbreaker affect machining? The D56 chipbreaker promotes segmented, controlled chips when machining ductile materials, which improves evacuation and reduces the risk of rework due to entangled or long chips. What advantages does the parallelogram 85° shape provide? The parallelogram 85° geometry increases lateral stability and reduces vibration, contributing to consistent surface finish and extended edge life under typical milling conditions. Is the insert coated? This insert uses an uncoated carbide grade (WAK15) chosen for its sharp cutting edge and suitability for non‑ferrous machining where coatings can encourage built‑up edge. Which tool series does this insert belong to? The insert is part of the Walter N‑Sortensystem, enabling consistent grade selection and simplified inventory management for non‑ferrous applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com