LNMU150812-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold PVD-coated carbide, broad applicability for steel, stainless steel and superalloys, and a robust 1.2 mm corner radius for reliable edge life; order the insert directly via Metav Werkzeuge or consult our team for process recommendations. LNMU150812-F57T WSP45G rectangular milling insert — Tiger‑tec Gold, Walter Tools The LNMU150812-F57T WSP45G is a rectangular milling insert designed for versatile face and shoulder milling in steel, stainless steel and heat‑resistant alloys, offering secure cutting with a 0° negative rake and an F57T chipbreaker. Tiger‑tec Gold PVD coating For steel, stainless steel and superalloys Negative 0° rake for secure cutting 1.2 mm corner radius for robustness Consistent chip control for higher productivity The combination of the Tiger‑tec Gold coating and the WSP45G grade provides PVD-coated carbide performance tailored for milling operations where predictable chip behaviour matters. The chipbreaker F57T supports controlled chip formation, reducing the risk of re-cutting and machine downtime. This results in more stable processes and a reduction in scrap rates in continuous production environments. By choosing a grade optimised for typical heat and deformation patterns in ferrous materials, operators gain a measurable increase in process reliability. Durable cutting edge for demanding materials Engineered for applications covering steel, stainless steel and superalloys, the insert’s 0° rake (negative) and 1.2 mm corner radius are intended to enhance edge strength and resist chipping under heavy loads. A negative rake angle contributes to a secure cutting action and improved stability during interrupted cuts, while the larger corner radius distributes cutting forces across a greater area, extending tool life. For machining tough, work‑hardening grades or titanium alloys, this combination reduces the need for frequent edge changes and supports reproducible surface finish. Integration into production and ease of use The rectangular form and standard ISO designation ease handling and tool planning on milling cutters that accept LNMU-style inserts. The insert thickness and form factor make indexation straightforward, so shops can maintain machining cadence without complex setup changes. The material marking P / M / S signals compatibility across major ISO workpiece groups, allowing consolidated tooling strategies and fewer toolholders. Clear identification of the chipbreaker and grade simplifies inventory management and quick selection for specific milling tasks. Contact Metav Werkzeuge for tailored cutting parameters or to discuss the ideal application of Walter Tools Tiger‑tec Gold inserts; reach our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: LNMU150812-F57T-WSP45G-WALTER Designation: LNMU150812-F57T WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core figures Size: 15 mm Thickness: 08 Corner radius: 1.2 mm Free rake angle: 0° (negative) Tolerance class: M Special features Grade: WSP45G (PVD-coated carbide) Chipbreaker: F57T Shape: rectangular Material application: P / M / S (steel, stainless steel, superalloys) Execution: U FAQ What materials is this insert suitable for? The LNMU150812-F57T WSP45G insert is designed for machining steel, stainless steel and heat‑resistant superalloys (ISO groups P, M, S), as indicated by the WSP45G grade. How does the chipbreaker influence performance? The F57T chipbreaker shapes and controls chips during milling, improving evacuation and reducing the chance of recutting; this enhances process stability for the LNMU150812-F57T insert. Why choose a negative 0° rake for milling? A 0° rake (negative) increases edge security under heavy or interrupted cuts and supports a robust cutting action, which benefits applications with varying engagement or higher cutting forces. What advantage does the 1.2 mm corner radius offer? The 1.2 mm corner radius increases cutting edge strength and distributes forces over a larger area, leading to extended edge life and improved tolerance to shock loads during milling. Is the insert compatible with standard LNMU toolholders? The insert follows the ISO-style LNMU designation and is intended for use in matching toolholders that accept that form factor, making integration into existing milling systems straightforward. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU150812T-F27T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver technology and the WKP25S coated carbide grade for consistent edge life and reliable chip control; the rectangular form with a 1.2 mm corner radius and 0° negative relief ensures stable milling of steel and cast iron. Order the insert directly via Metav Werkzeuge or contact their consultants for application-specific recommendations. LNMU150812T-F27T WKP25S milling indexable insert for steel and cast iron — Walter Tools The LNMU150812T-F27T WKP25S is a rectangular milling insert optimised for medium-duty to heavy-duty machining of steel and cast iron, offering stable cutting performance and predictable tool life. Tiger·tec Silver coating for stable cutting WKP25S coated carbide grade 0° negative relief for secure cutting edges Rectangular 15 mm insert with 1.2 mm radius Increased productivity through consistent edge life The combination of Tiger·tec Silver coating and the WKP25S carbide grade results in a predictable wear pattern and extended service intervals, which directly supports higher machine utilisation. The temper-resistant coating reduces adhesive and abrasive wear during the high temperatures typically encountered when machining steel and cast iron, so tool changeovers become less frequent and process reliability improves. This leads to measurable gains in throughput and a lower cost per component, particularly in batch production or continuous milling operations. Reliable chip control and secure cutting geometry Equipped with the F27T chipbreaker and a 0° negative relief, the insert is designed to produce short, controllable chips on interrupted and continuous cuts. A chipbreaker shapes the swarf to avoid nesting and tool-clogging, which reduces the risk of workpiece damage and machine stoppages. The rectangular design combined with the corner radius 1.2 mm gives robust cutting edges that withstand higher radial forces while maintaining surface finish quality; this makes the insert suitable for slotting, ramping and shoulder milling where stability is essential. Practical integration and machining guidance The insert’s nominal 15 mm size and 08 thickness deliver a compact yet rigid cutting geometry that fits many common milling toolholders. The tolerance class M and execution U indicate standard dimensional accuracy and the insert’s orientation; these details simplify tool selection and ensure interchangeability in established tool systems. For optimal results, pair the insert with appropriate cutting parameters for steel and cast iron, and consider coolant strategy and spindle power to exploit the coating and grade benefits. Walter Tools’ grade selection is engineered for broad material coverage and consistent performance. Contact Metav Werkzeuge today for tailored machining parameters and stock availability of Walter Tools LNMU150812T-F27T WKP25S milling inserts Technical data Article number (SKU): LNMU150812T-F27T-WKP25S-WALTER Product label: Fräswendeschneidplatte LNMU150812T-F27T WKP25S Walter Tools Product type: milling indexable insert Manufacturer: Walter Tools Facts Insert size: 15 mm Corner radius: 1.2 mm Thickness: 08 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger-tec Silver Grade: WKP25S (coated carbide) Chipbreaker: F27T Plate shape: rectangular Execution: U Material suitability: steel (P), cast iron (K) FAQ Which materials is this insert suitable for? The insert is optimised for machining steel (group P) and cast iron (group K); the WKP25S grade and Tiger·tec Silver coating support these applications. What does the F27T chipbreaker achieve? The F27T chipbreaker organises swarf into short, controllable chips to reduce clogging and improve process stability when using the LNMU150812T-F27T WKP25S insert. How does the 0° negative relief affect cutting? A 0° negative relief increases cutting-edge support and reduces the risk of edge chipping in heavy cuts, improving security of the cutting edge under higher radial forces. Is this insert compatible with standard rectangular toolholders? Yes, the rectangular 15 mm format and tolerance class M make the insert compatible with common rectangular milling toolholders specified for this geometry. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LNMU150812T-F27T WKP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating performance, WKP35G grade robustness and precise geometry for consistent, productive milling of steel and cast iron; order from Metav Werkzeuge or consult our technical team for application advice. LNMU150812T-F27T WKP35G – Milling indexable insert by Walter Tools, for steel and cast iron, Tiger·tec Gold The LNMU150812T-F27T WKP35G is a rectangular milling insert designed for stable, high-productivity machining of steel and cast iron in demanding industrial applications. Tiger·tec Gold coating technology Designed for steel and cast iron machining Rectangular insert with 1.2 mm corner radius Negative 0° clearance for stable cutting High productivity through advanced coating and grade The combination of the Tiger·tec Gold series and the WKP35G grade gives this insert a coated carbide performance profile optimised for consistent material removal rates. The coating reduces adhesive and abrasive wear, which translates into longer tool life and fewer index changes. For operations where cycle time and repeatability matter, this results in measurable improvements to process efficiency and reduced downtime caused by tool changeovers. Geometry engineered for process stability A rectangular plate form with a 1.2 mm corner radius and negative 0° clearance provides reliable cutting forces and controlled chip formation. The negative clearance improves support at the cutting edge, which enhances stability during heavy engagement cuts and reduces vibration. The incorporated F27T chipbreaker geometry promotes predictable chip control, lowering the risk of built-up edge and improving surface finish on the workpiece. Broad applicability across steel and cast iron Marked with material class P / K, the insert is suited to the ISO groups for steel (P) and cast iron (K). The WKP35G grade is a coated hardmetal formulation tailored to handle the thermal and mechanical loads common when machining these groups. This makes the insert appropriate for a wide range of batch and single-part production tasks where material mix or geometry changes require a flexible but robust cutting solution. Consistent results and low maintenance effort Precision in the plate tolerances and the stable cutting geometry reduce process scatter and the need for frequent adjustment. The insert’s build and coating are aimed at maintaining a sharp, wear-resistant cutting edge, which supports repeatable surface quality and longer intervals between inspection or replacement. Combined, these attributes contribute to predictable component quality and a lower total cost of ownership in production environments. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools’ Tiger·tec Gold LNMU150812T-F27T WKP35G insert and arrange personalised cutting data or delivery coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LNMU150812T-F27T-WKP35G-WALTER Designation: LNMU150812T-F27T WKP35G Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 0.8 mm Clearance: negative 0° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F27T Plate form: rectangular Execution: U Material suitability: steel (P), cast iron (K) Substrate: coated carbide FAQ What materials is this insert suitable for? The LNMU150812T-F27T WKP35G insert is designed for ISO groups P and K, making it suitable for machining steel and cast iron. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WKP35G grade reduces adhesive and abrasive wear, extending insert life and maintaining cutting-edge stability over longer production runs. What advantage does the negative 0° clearance provide? A negative 0° clearance increases support at the cutting edge, improving stability during heavy cuts and helping to achieve consistent surface finish with fewer tool-related interruptions. Is the chip control suitable for mixed production batches? Yes, the F27T chipbreaker is engineered for predictable chip formation, which assists reliable operation across varying part geometries and mixed-material batches. Which toolholders are compatible with this rectangular insert? Compatibility depends on the chosen milling cutter and holder; the LNMU150812T-F27T WKP35G follows standard insert nomenclature and is intended for holders accepting this ISO designation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are used for descriptive purposes only. The offered item is an original, factory-new product of the manufacturer. Walter Tools is mentioned for explanation and identification; there is no affiliation between our company and the named brands.
LNMU150812T-F27T WKP35S Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger·tec Silver coating and the WKP35S carbide grade for consistent chip control and long tool life; the rectangular shape with a 1.2 mm corner radius and 0° negative relief ensures stable milling in steel and cast iron. Order directly via Metav Werkzeuge or ask the consultants for tailored application advice. LNMU150812T-F27T WKP35S — Rectangular milling insert, Tiger·tec Silver series, Walter Tools The LNMU150812T-F27T WKP35S is a rectangular milling insert engineered for productive face and shoulder milling in steels and cast irons, combining a modern coated carbide grade with a dedicated chipbreaker F27T for reliable chip formation. High-performance Tiger·tec Silver coating WKP35S: optimised for steel and cast iron Rectangular geometry for stable milling Negative 0° relief for tough operations Consistent performance through modern coating and grade The Tiger·tec Silver coating together with the WKP35S grade delivers predictably long tool life under typical milling loads. The engineered coating reduces abrasive wear and improves thermal stability, which translates to fewer insert changes and higher machine uptime. For operations that require repeatable edge life and stable dimensions, this combination offers a measurable productivity advantage and helps to reduce overall machining costs by extending service intervals. Reliable chip control and secure cutting geometry Equipped with the chipbreaker F27T and a 1.2 mm corner radius, the insert produces short, controllable chips when machining both unalloyed and alloyed steels as well as cast iron. The rectangular form provides a broad support area in the pocket, improving clamping stability and vibration resistance. The result is a consistent surface finish and reduced risk of edge chipping during interrupted cuts, which is particularly valuable in production environments that demand repeatability. Application benefits and process safety for workshop use The insert’s 0° negative relief is designed for demanding cuts where rigidity and a strong cutting edge are priorities. This geometry supports heavy engagement and interrupted milling while maintaining dimensional stability. Classified for materials P and K according to ISO groupings, the insert is a solid choice for mixed production where both steel and cast iron components are processed. The combination of grade and geometry reduces scrap risk and improves first-pass yield. Practical fitment and user advantages As a standard format within the Tiger·tec Silver series, the insert integrates easily into common toolholders that accept the LNMU-style footprint. The coded thickness and contour specifications simplify tooling logistics and spare-part management in the workshop. Using this insert reduces set-up frequency and supports a smoother production flow thanks to predictable wear patterns and straightforward reconditioning schedules. Contact Metav Werkzeuge today for application-specific recommendations or to discuss batch supply and tooling strategies — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: LNMU150812T-F27T-WKP35S-WALTER Description: Fräswendeschneidplatte LNMU150812T-F27T WKP35S Walter Tools Manufacturer: Walter Tools Key figures Plate size: 15 Thickness code: 08 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: F27T Plate form: Rectangular Execution: U Applicable materials: P (steel), K (cast iron) FAQ What materials is this insert suitable for? This insert is rated for steel (ISO group P) and cast iron (ISO group K); the WKP35S grade and Tiger·tec Silver coating are tuned for those material groups. How does the chipbreaker affect machining? The chipbreaker F27T promotes short, manageable chips and stabilises cutting forces, which benefits surface finish and tool life during milling of steel and cast iron. Is the insert suitable for heavy-duty milling? Yes — the 0° negative relief and rectangular form provide rigidity for heavy engagement and interrupted cuts, supporting process stability in demanding operations. Which toolholders are compatible with this insert? The insert follows the LNMU-style footprint; it fits holders specified for LNMU1508-series inserts and is intended for secure clamping in standard Walter-compatible toolholders. How does the Tiger·tec Silver series improve productivity? The coating improves thermal resistance and wear behaviour, resulting in longer edge life and fewer index changes, which increases effective machining time and reduces tooling costs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
LNMU150812T-F27T WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control, and a robust 1.2 mm corner radius for reliable milling results; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. LNMU150812T-F27T WPP35G – Rectangular milling insert for steel, Tiger·tec Gold (Walter Tools) The LNMU150812T-F27T WPP35G is a rectangular milling insert engineered for efficient steel machining in industrial milling applications, combining Tiger·tec Gold coating with a negative rake geometry for robust performance. Tiger·tec Gold coating for high wear resistance Designed for ISO P steels and stable chip control 0° negative rake for robust cutting performance 1.2 mm corner radius for improved tool life Proven wear resistance for continuous production The Tiger·tec Gold coating and the WPP35G grade deliver a wear-resistant surface layer that extends tool life in demanding steel applications. As a coated carbide solution, this insert is formulated to manage the heat and adhesive wear typical when machining steel, providing consistent cutting edges over longer intervals. The result is fewer tool changes, reduced downtime and a more predictable machining cycle. The coated substrate also supports stable edge retention under elevated temperatures, which is particularly beneficial for medium-to-high cutting speeds. Geometry tuned for stable chip control and strength A rectangular insert with 0° negative rake geometry offers robustness for heavier engagement and interrupted cuts, while the F27T chipbreaker optimises chip formation for the ISO P material group. The combination reduces the risk of edge chipping and supports consistent chip evacuation, which in turn improves surface quality and process reliability. The 1.2 mm corner radius increases edge strength and contributes to improved tool life in shoulder milling and face milling operations where mechanical loads are higher. Application scope and practical integration in toolpacks This insert is specified for the P (steel) application class under ISO 513 and is suitable across a range from wear-resistant to more ductile steels. The insert’s design and tolerance class M make it compatible with standard milling toolholders that accept the LNMU form factor. For production planners and process engineers, the grade offers a balance between productivity and predictable tool life, allowing optimisation of cycle times without compromising component quality. The LNMU150812T-F27T WPP35G also supports systematic tool inventory management owing to its established grade and series. For technical advice or to obtain Tiger·tec Gold inserts from Walter Tools, contact Metav Werkzeuge for prompt assistance and availability. Technical data Article number: LNMU150812T-F27T-WPP35G-WALTER Name: Fräswendeschneidplatte LNMU150812T-F27T WPP35G Walter Tools Brand: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Gold Facts Plate size: 15 Corner radius: 1.2 mm Thickness code: 08 Free angle: 0° (negative) Tolerance class: M Special features Grade: WPP35G (Tiger·tec Gold) Substrate: coated carbide Application group: P (steel) Chipbreaker: F27T Plate form: Rectangular Execution: U Material designation (tool): coated carbide FAQ Is this insert suitable for steel machining? The LNMU150812T-F27T WPP35G is designed for ISO P steels and offers graded performance across wear-resistant to ductile steels, making it suitable for a wide range of steel machining tasks. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP35G grade improves wear resistance and edge stability, helping to extend tool life and maintain consistent cutting performance when machining steel. Which chipbreaker is fitted and how does it affect machining? The insert uses the F27T chipbreaker, which promotes controlled chip formation and evacuation for ISO P materials, improving surface finish and reducing the likelihood of built-up edge. Can the insert handle heavy cutting or interrupted cuts? Yes. The 0° negative rake geometry combined with a 1.2 mm corner radius offers mechanical robustness that supports heavier engagements and interrupted cutting conditions. What size, tolerance and form factor are specified? This insert has a plate size of 15, a corner radius of 1.2 mm, thickness code 08 and tolerance class M; it is supplied in a rectangular form compatible with appropriate holders. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer.
LNMU160812-B57T WKP35S Wendeplatten - Walter Tools
LNMU160812-B57T WKP35S Fräswendeschneidplatte von Walter Tools LNMU160812-B57T WKP35S ist eine Rechteck-Fräswendeschneidplatte der Serie Tiger-tec Silver, konzipiert für produktive Zerspanung von Stahl und Gusseisen. Rechteckige Wendeschneidplatte, Eckenradius 1,2 Tiger-tec Silver Beschichtung für hohe Standzeit Optimierter Spanbrecher B57T für kontrollierte Spanform Negativer FreiWinkel 0° für stabile Schnittbedingungen Geeignet für Stahl (P) und Gusseisen (K) Hohe Standzeit dank moderner Beschichtungstechnologie Die Tiger-tec Silver Beschichtung kombiniert abriebfestes Beschichtungsmaterial mit einer robusten Schneidkante, was die Standzeit bei Serienbearbeitung nachhaltig erhöht. Anwender profitieren von längeren Standzeiten und weniger Werkzeugwechseln, wodurch die Produktivität in der Fertigung steigt. Insbesondere bei wechselnden Schnittbedingungen sorgt die Sorte WKP35S für gleichbleibende Leistung und reduziert ungeplante Stillstandzeiten. Geometrie und Spanführung für stabile Prozesse Die rechteckige Plattenform mit Eckenradius 1,2 und der optimierte Spanbrecher B57T liefern eine vorhersehbare Spanbildung und verbessern die Oberflächengüte. Der negative FreiWinkel 0° sorgt für stabile Schnittkräfte und erhöht die Formstabilität in der Aufnahme, was besonders bei längeren Schruppoperationen vorteilhaft ist. Die Ausführung U und Toleranzklasse M gewährleisten wiederholgenaue Einsetzbarkeit in automatisierten Abläufen. Anwendungsspektrum und Kundenmehrwert Die Wendeschneidplatte eignet sich vor allem für die Bearbeitung von Stahl (P) und Gusseisen (K). P steht für unlegierte und legierte Stähle, K steht für Gusseisen mit abrasivem Verschleiß und brüchiger Spanbildung. Durch die Kombination aus Sorte, Beschichtung und Geometrie erhalten Fertiger eine wirtschaftliche Lösung für mittlere bis hohe Stückzahlen, die Prozesssicherheit und konstante Ergebnisse verlangt. Lieferbare Lagerbestände und technische Beratung unterstützen die Integration in vorhandene Fertigungsprozesse. Empfehlung: Für effiziente und prozesssichere Fräsoperationen die WKP35S-Sorte von Walter Tools über Metav Werkzeuge anfragen oder bei Detailfragen unseren technischen Service kontaktieren: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: LNMU160812-B57T-WKP35S-WALTER Marke: Walter Tools Serie: Tiger-tec Silver Sorte: WKP35S Bezeichnung: LNMU160812-B57T Produktart: Fräswendeschneidplatte Ausführung: U Plattenform: Rechteck Daten Plattengröße: 16 Plattendicke: 08 Eckenradius: 1,2 FreiWinkel: 0° (negativ) Besonderheiten Spanbrecher: B57T Beschichtungstechnologie: Tiger-tec Silver Sortenbeschreibung: beschichtetes Hartmetall Bearbeitbar: Stahl (P) — unlegierte und legierte Stähle Bearbeitbar: Gusseisen (K) — abrasiver Verschleiß, brüchige Späne Toleranzklasse: M WPL-Sorte: WKP35S FAQ Für welche Werkstoffe eignet sich die Platte am besten? Die LNMU160812-B57T WKP35S Fräswendeschneidplatte von Walter Tools ist primär für die Bearbeitung von Stahl (P) und Gusseisen (K) ausgelegt und bietet dort optimale Verschleißfestigkeit und Spanbildung. Welche Vorteile bringt die Tiger-tec Silver Beschichtung? Die Tiger-tec Silver Beschichtung erhöht die Abriebfestigkeit und verbessert die Lebensdauer der Wendeschneidplatte, was zu weniger Werkzeugwechseln und geringeren Fertigungskosten führt. Wie wirkt sich der negative FreiWinkel 0° auf die Bearbeitung aus? Ein negativer FreiWinkel von 0° sorgt für höhere Formstabilität und geringere Schnittdruckschwankungen, wodurch sich die Platte besonders für robuste Schrupp- und mittlere Schlichtoperationen eignet. Wann ist der Eckenradius 1,2 zu bevorzugen? Der Eckenradius 1,2 bietet eine gute Kombination aus Kantenschonung und Oberflächengüte; empfohlen bei mittleren Schnittwerten und wenn erhöhte Kantenstabilität gefragt ist. Welche Rolle spielt der Spanbrecher B57T? Der Spanbrecher B57T formt Späne kontrolliert und verhindert lange, fadenförmige Späne; das erleichtert die Kühlung und sichert konstante Bearbeitungsbedingungen. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LNMU160812-B57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the high‑productivity Tiger‑tec Gold coating and the B57T chipbreaker combined with a 0° negative rake for consistent steel machining; order directly via Metav Werkzeuge or consult our cutting tool specialists for tailored machining data. LNMU160812-B57T WPP35G – Milling insert, Tiger‑tec Gold coated for steel (Walter Tools) The LNMU160812-B57T WPP35G is a rectangular milling insert designed for reliable steel machining in general milling applications Tiger‑tec Gold coated for high productivity Optimised B57T chipbreaker for stable chips Rectangular geometry with 1.2 mm corner radius Negative rake 0° for secure edge performance Longer tool life through advanced coating and grade selection The combination of the Tiger‑tec Gold coating and the WPP35G grade delivers measurable improvements in endurance during steel machining. The multi‑layer PVD/CVD coating reduces wear and increases thermal resistance, which translates directly into fewer tool changes and longer intervals between regrinds. For production environments this means a more predictable process and reduced cycle interruptions, supporting higher overall equipment effectiveness. Stable chip control for consistent surface quality The B57T chipbreaker, paired with the 0° negative rake, controls chip form and evacuation in typical steel cutting conditions. Stable chips help prevent re‑cutting and reduce the risk of built‑up edge, resulting in a more uniform surface finish and fewer scrap pieces. Clear chip control also reduces downtime associated with manual chip handling and supports safer automated machining. Robust form and reliable clamping for precise results With a rectangular form and a 1.2 mm corner radius, this insert balances edge strength with acceptable corner definition. The geometry supports both medium‑to‑heavy cuts and interrupted cutting, where edge robustness prevents premature chipping. The thickness code and insert size provide secure seating in standard toolholders, ensuring repeatable positioning and constant cutting heights across tool assemblies. Optimised for steel — predictable performance where it matters Engineered for the P (steel) material group, the insert’s substrate and coating combination is tuned to manage the typical heat generation and chip formation of steel. The result is reliable performance across a broad range of steel grades, from unalloyed to moderately alloyed steels. For manufacturing operations focused on consistent throughput, this configuration offers a strong cost‑to‑performance ratio by extending tool life and stabilising part quality. For application advice, cutting data or supply queries regarding Walter Tools Tiger‑tec Gold inserts, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will recommend the optimal insert and parameters for the machining task at hand. Technical Data Article number (SKU): LNMU160812-B57T-WPP35G-WALTER Designation: LNMU160812-B57T WPP35G Product type: Milling insert (rectangular) Brand: Walter Tools Grade/series: WPP35G, Tiger‑tec Gold Chipbreaker: B57T Rake: 0° (negative) Corner radius: 1.2 mm Size: 16 Thickness code: 08 Execution: U Tolerance class: M Facts Corner radius: 1.2 mm Rake angle: 0° Insert size: 16 Thickness code: 08 Special features Coating: Tiger‑tec Gold (coated carbide) Applicable material group: Steel (P) Geometry: Rectangular insert with B57T chipbreaker Grade: WPP35G — designed for steel machining Robust edge for interrupted cuts and general milling FAQ What material group is this insert intended for? The LNMU160812-B57T WPP35G is specified for the P material group, meaning it is intended and optimised for machining steel. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WPP35G grade increases wear resistance and thermal stability, extending tool life and improving process stability during steel machining. Is the B57T chipbreaker suitable for heavy cuts? Yes, the B57T chipbreaker is designed to produce controlled chips under a range of cutting conditions, supporting stable performance even in medium to heavy milling operations. What does the 0° negative rake mean for cutting behaviour? A 0° negative rake provides a stronger cutting edge and improved resistance to edge chipping, which is beneficial for interrupted cuts and tougher steel grades. Can this insert be used in standard rectangular toolholders? The insert’s rectangular form and size code make it compatible with common toolholders designed for this insert family; secure seating ensures repeatable cutting heights and reliable positioning. The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
LNMU160812-F57T WKP25S Wendeplatten - Walter Tools
Combine the wear resistance of the Tiger·tec Silver grade with the robust F57T chipbreaker and 0° negative rake for stable chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for application advice. LNMU160812-F57T WKP25S milling insert by Walter Tools — Tiger·tec Silver, for steel & cast iron The LNMU160812-F57T WKP25S is a rectangular milling insert engineered for productive machining of steel and cast iron in industrial milling applications. Tiger·tec Silver coated grade WKP25S Optimised for steel and cast iron machining Rectangular 16 size with 1.2 mm corner radius 0° negative rake with F57T chipbreaker Increased process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP25S cemented-carbide grade delivers improved wear resistance and consistent edge life under typical steel and cast iron cutting conditions. The coating technology reduces abrasive and adhesive wear during interrupted cuts, which translates into fewer tool changes and more predictable production cycles. For machining centres where cycle time and repeatability matter, this geometry-grade pairing supports a stable cutting regime and helps maintain component tolerances over longer tool life. Robust geometry for secure cutting and predictable surface finish A 0° negative rake geometry with a 1.2 mm corner radius on a rectangular 16 platform offers a balance between edge strength and dimensional control. The negative rake increases the insert's resistance to chipping in interrupted or heavy cuts, while the defined corner radius contributes to reproducible surface quality without compromising edge stability. The F57T chipbreaker is designed to form short, manageable chips when cutting steels and cast irons, reducing the risk of built-up edge and improving swarf handling in high-volume milling operations. Practical benefits for shop-floor productivity and tool selection Designed specifically for the machining groups P and K (steel and cast iron), this insert reduces process variability and supports higher material removal rates where appropriate. The coated cemented-carbide construction and the WKP25S grade are tuned for the thermal and mechanical demands of these materials, offering a cost-effective balance of tool life and cutting performance. When selecting cutting parameters, favour stable fixtureings and moderate feeds to exploit the insert's chip control; for specialised applications, consult machining data sheets to match speeds and feeds to workpiece grade. For high-productivity milling with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for a tailored recommendation and application support; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LNMU160812-F57T-WKP25S-WALTER Product: Milling insert LNMU160812-F57T WKP25S (Walter Tools) Core specifications Size: 16 mm Corner radius: 1.2 mm Free cutting angle: 0° (negative) Plate thickness: 08 Tolerance class: M Special features Grade: WKP25S (Tiger·tec Silver) Coating: coated cemented carbide Chipbreaker: F57T Plate form: Rectangular Suitable for: Steel (P) and cast iron (K) FAQ Which materials is this insert intended for? The LNMU160812-F57T WKP25S is intended primarily for machining steel (P) and cast iron (K) in accordance with ISO material-group guidance. What benefits does the Tiger·tec Silver grade provide? The Tiger·tec Silver grade used in WKP25S gives enhanced wear resistance and better thermal stability, which supports longer edge life and predictable performance in steel and cast-iron milling. How does the F57T chipbreaker affect machining? The F57T chipbreaker promotes short, controllable chips in roughing and mixed operations on steel and cast iron, improving swarf evacuation and reducing build-up on the cutting edge. Which geometry features support heavy-duty milling tasks? Features such as the 0° negative rake, 1.2 mm corner radius and rectangular form provide edge strength and robustness suitable for interrupted cuts and higher radial engagement, aiding process reliability Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original, brand-new goods from the manufacturer.
LNMU160812-F57T WKP35G Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Gold coated carbide grade that combines robust wear resistance and reliable chip control with a rectangular geometry optimised for stable milling of steel and cast iron; order the insert directly via Metav Werkzeuge or request application advice from our technical consultants. LNMU160812-F57T WKP35G milling insert — Walter Tools, Tiger‑tec Gold, for steel & cast iron The LNMU160812-F57T WKP35G is a rectangular milling insert engineered for high‑productivity peripheral and face milling in steel and cast iron, offering a coated‑carbide grade and a chipbreaker designed for consistent machining. Tiger‑tec Gold coated carbide grade WKP35G Optimised for steel and cast iron machining Rectangular insert 16 mm with 1.2 mm corner radius 0° negative rake with F57T chipbreaker for stable chips Consistent chip control increases process reliability The combination of the Tiger‑tec Gold coating with the WKP35G substrate and the dedicated F57T chipbreaker delivers stable chip control across mixed machining conditions. The coating technology is designed to reduce adhesive and abrasive wear on the cutting edge, which in turn prolongs effective cutting life and reduces unplanned tool changes. For operations in the ISO groups P (steel) and K (cast iron), this insert ensures predictable chip form and evacuation, lowering the risk of rework and improving cycle‑time consistency. Robust geometry for repeatable component quality A rectangular insert with a nominal size of 16 mm and a 1.2 mm corner radius provides a balance between edge strength and achievable surface finish. The 0° negative rake geometry increases edge robustness for interrupted cuts and heavy engagement, while the tolerance class M supports reproducible clamping and positional accuracy in toolholders. Together these design choices reduce dimensional scatter on machined features and help maintain target tolerances over longer tool life, contributing directly to process stability and cost efficiency. Productive cutting strategy with broad material coverage Built on the Tiger‑tec Gold series, the insert is specified for machining steel and cast iron in typical workshop and production environments. The designation follows ISO material groupings (ISO 513: P and K) so that cutting data selection is straightforward when matching feeds and speeds to workpiece material. The LNMU160812‑F57T WKP35G insert supports higher cutting speeds and a reliable cutting edge for volume production, making it suitable where throughput and consistent surface quality matter. If application parameters require fine‑tuning, Metav Werkzeuge’s technical team can provide recommended cutting data and holder compatibility to ensure optimal performance. Request tailored application advice from Metav Werkzeuge to match the LNMU160812‑F57T WKP35G insert to the optimal cutting data and holder system for specific machining tasks Technical data SKU: LNMU160812-F57T-WKP35G-WALTER Article designation: LNMU160812-F57T WKP35G Brand: Walter Tools Series: Tiger‑tec Gold Dimensions & core values Insert size: 16 mm Corner radius: 1.2 mm Rake angle: 0° negative Thickness code: 08 Tolerance class: M Material & special features Coating / grade: Tiger‑tec Gold, coated carbide WKP35G Chipbreaker: F57T Plate form: rectangular Execution: U Application: Steel (P) and Cast iron (K) Main use: milling insert for productive machining FAQ What materials is this insert intended for? The LNMU160812‑F57T WKP35G milling insert is formulated for steel (ISO group P) and cast iron (ISO group K), reflecting the recommended application areas of the Tiger‑tec Gold WKP35G grade. Which chip form can be expected with the F57T chipbreaker? The F57T chipbreaker produces short, controlled chips in typical steel and cast‑iron conditions, improving evacuation and reducing the risk of chip entanglement during end and face milling operations. How does the 0° negative rake influence performance? A 0° negative rake increases edge strength and resistance to chipping during interrupted cuts and heavy engagements, which supports stable tool life and consistent component quality in roughing and semi‑finishing passes. Is the insert suitable for high‑speed applications? Yes; the Tiger‑tec Gold coating and the WKP35G substrate are engineered for productive machining and can support elevated cutting speeds when combined with appropriate feeds and coolant strategies. What size and geometry should the holder provide for correct clamping? A toolholder accepting a rectangular insert of 16 mm with the listed thickness code and tolerance class M ensures secure clamping and positional repeatability; consult holder specifications to verify compatibility with negative‑rake rectangular inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for descriptive purposes only. There is no affiliation between our company and the trademark owners. The offered item is original and factory‑new.
LNMU160812-F57T WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating, the WKP35S grade and the F57T chipbreaker for reliable machining of steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. LNMU160812-F57T WKP35S rectangular milling insert — Tiger·tec Silver for steel and cast iron, Walter Tools A LNMU160812-F57T WKP35S rectangular milling indexable insert designed for demanding steel and cast iron applications, offering stable cutting with a negative 0° clearance and consistent chip control. Tiger·tec Silver coating technology Suitable for steel and cast iron machining Negative 0° clearance for stable cutting Rectangular insert with 1.2 mm corner radius Reliable cutting performance for steel and cast iron The combination of the WKP35S carbide grade with the Tiger·tec Silver coating is engineered to balance wear resistance and toughness when machining group P (steel) and group K (cast iron) materials. The coated carbide substrate resists abrasive wear typical of cast iron and copes with the heat and chip formation encountered when cutting steel. With the integrated F57T chipbreaker, chips are formed and evacuated predictably, which reduces the risk of built-up edge and protects the workpiece surface. This results in more stable process windows and fewer unplanned interruptions, supporting continuous production and improved component consistency. Geometry that strengthens edge life and surface quality The insert’s rectangular form and its 1.2 mm corner radius provide a robust cutting edge that withstands intermittent cuts and variable engagement depths. The negative 0° clearance lends a stable cutting geometry that minimises vibration and increases edge support during heavy machining. Together, these geometric choices reduce the likelihood of premature edge chipping and contribute to more consistent surface finishes over longer tool life. The specified tolerance class M ensures repeatable fitment in standard cutter bodies, aiding quick index changes and predictable positional accuracy. Productivity advantages and process integration Designed as part of Walter Tools’ Tiger·tec Silver series, this insert supports high productivity by enabling higher metal removal rates and longer tool cycles compared with conventional uncoated grades. The predictable wear behaviour reduces scrap and rework costs, while the robust chip control lowers the need for manual chip clearing. Integration into existing milling systems is straightforward thanks to standard ISO designation and the common rectangular geometry, allowing quick retrofitting into compatible tool holders. For customers seeking application-specific cutting data or optimisation tips, Metav Werkzeuge provides tailored advice to match speeds, feeds and coolant strategy to the component material and machine capability. Contact Metav Werkzeuge for tailored cutting data and order the Walter Tools LNMU160812-F57T WKP35S to increase machining stability and component throughput Technical data Article number: LNMU160812-F57T-WKP35S-WALTER Article designation: LNMU160812-F57T WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Plate size: 16 Plate thickness: 08 Corner radius: 1.2 Clearance angle: 0° (negative) Tolerance class: M Special features Chipbreaker: F57T Shape: Rectangular Material applicability: P (steel), K (cast iron) Execution: U FAQ Which materials is this insert suited for? The LNMU160812-F57T WKP35S from Walter Tools is specified for machining steels (ISO group P) and cast irons (ISO group K), benefiting from the Tiger·tec Silver coating and the WKP35S grade for those materials. What does the F57T chipbreaker do? The F57T chipbreaker on this insert controls chip formation for predictable, breakable chips during steel and cast iron machining, improving evacuation and reducing surface damage. How does the negative 0° clearance affect machining? A negative 0° clearance provides enhanced edge support and vibration resistance, which helps maintain dimensional accuracy and prolongs the cutting edge under heavy engagement. Is the insert compatible with standard cutter bodies? Yes; the insert follows common ISO designation and the tolerance class M, allowing fitment into compatible rectangular insert milling cutters designed for this geometry. Can the insert be used for finishing operations? While optimised for robust, productive cutting, the combination of coating and geometry also supports consistent surface quality; adjustment of feeds and speeds is recommended for finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
LNMU160812-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a combination of Tiger·tec Gold coated carbide and the optimised F57T chipbreaker for reliable steel machining, together with the stability of a negative 0° rake and a 1.2 mm corner radius; order the milling insert directly via Metav Werkzeuge or ask the Metav Werkzeuge consultants for tailored cutting data LNMU160812-F57T WPP35G milling insert, Tiger·tec Gold coated, for steel – Walter Tools The LNMU160812-F57T WPP35G is a rectangular indexable milling insert engineered for efficient machining of steel under continuous production conditions Tiger·tec Gold coating for extended tool life Optimised F57T chipbreaker for steel machining Rectangular form with 1.2 mm corner radius Negative 0° rake for stable cutting Enhanced wear resistance and consistent cutting performance The combination of a Tiger·tec Gold coating and a coated carbide substrate offers a clear advantage where repeatable performance is required. The surface engineering reduces abrasive wear and helps maintain edge stability during extended cycle times, which translates into longer periods between index changes. With the built-in chipbreaker F57T, chip formation and evacuation are improved for typical steel chips, reducing rework and downtime while increasing overall process reliability. Balanced grade for steel applications and predictable results The WPP35G grade is purpose-developed for ISO P materials and provides a balanced compromise between wear resistance and toughness. This makes the insert suitable for a broad range of steel tasks where moderate to high cutting forces occur. The specification emphasises constant results and predictable tool life, so production planning and cost-per-part calculations become more dependable when the insert is used in a matched toolholder and cutting data are applied correctly. Geometry designed for secure machining and easy integration With a corner radius of 1.2 mm and a rectangular plate form, the insert supports robust engagement and good edge strength for interrupted or continuous cuts. The negative 0° rake increases stability at the cutting edge and reduces the risk of chipping under heavy loads. The nominal insert dimensions (16 mm length, 0.8 mm thickness) and ISO-based designation make it straightforward to select compatible toolholders that accept LNMU-style inserts, simplifying tool inventory management and changeover. For reliable steel machining with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for availability and tailored cutting data for the LNMU160812-F57T WPP35G insert Technical data Article number: LNMU160812-F57T-WPP35G-WALTER Designation: LNMU160812-F57T WPP35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Insert size: 16 mm Thickness: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Chipbreaker: F57T Grade: WPP35G Special features Coating technology: Tiger·tec Gold Coated carbide grade Rectangular form ISO P application: steel Negative rake for stable cutting Optimised chip control via F57T chipbreaker FAQ Which materials is this insert suitable for? The insert is intended for ISO P materials; it is optimised for steel machining and was developed to manage the heat and chip behaviour typical for steels. What are the key geometry values and their effect? A corner radius of 1.2 mm and a negative 0° rake enhance edge strength and stability during load changes; these values support secure machining and predictable tool life. Can the insert be used for both roughing and semi-finishing operations? Yes, the WPP35G grade balances wear resistance and toughness, making the insert appropriate for a range of operations from roughing to semi-finishing in steel applications. Does the LNMU160812-F57T fit standard toolholders? The LNMU designation corresponds to a common insert form; it fits toolholders designed for LNMU-style rectangular inserts, allowing easy integration into existing tooling systems. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating reduces abrasive wear and improves edge resilience, which contributes to longer service intervals and more consistent component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
LNMU160812-F57T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold grade performance and the WSM35G cutting geometry for secure chip control and long tool life; combine economical machining of heat-resistant alloys and rostfreier Stahl with reliable edge stability. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. LNMU160812-F57T WSM35G rectangular milling insert by Walter Tools — Tiger·tec Gold for hard-to-machine alloys LNMU160812-F57T WSM35G is a rectangular indexable milling insert designed for heavy-duty operations in heat-resistant alloys and rostfreier Stahl, delivering robust edge life and stable chip formation Tiger·tec Gold coated carbide grade WSM35G Optimised chipformer F57T for stable chips 0° negative rake for heavy roughing Rectangular 16 mm insert with 1.2 mm corner Consistent performance for hard-to-machine materials The coated cemented-carbide grade WSM35G from the Tiger·tec Gold family is engineered for demanding milling of rostfreier Stahl and nickel-based superalloys. Its coating and substrate combination promote stable chip formation and resist thermal loading, so machining cycles run with fewer interruptions. The insert geometry, paired with an F57T chipformer, reduces the risk of built-up edge and supports a predictable cutting process, which in turn lowers tool change frequency and increases overall productivity. Secure edge stability and economy in production A 0° (negative) free angle increases the effective support behind the cutting edge, improving robustness during interrupted cuts and heavy engagement. This design choice favours durability over minimal cutting forces, making the insert particularly suitable for roughing contours and shoulder milling where edge security matters. The economic advantage arises from prolonged tool life and fewer scrap parts, contributing directly to a lower cost per component in continuous production. Geometry and handling that support process reliability The rectangular form with a 1.2 mm corner radius provides a compromise between edge strength and achievable profile detail. The 16 mm designation denotes the insert size for stable clamping in standard milling cutters that accept LNMU-type inserts. Thanks to the integrated F57T chip control, chips are guided away from the cutting zone, improving surface integrity and reducing heat concentration at the cutting edge—factors that extend service intervals and simplify process planning. Integration into the machining workflow and selection guidance When selecting tooling, pair this insert with cutters and feeds geared to the intended material group: lower cutting speeds for rostfreier Stahl and adjusted feeds for superalloys to manage heat. The insert’s WSM35G grade provides a broad material window; however, matching holder rigidity and coolant strategy will maximise the benefits of the grade. For customers seeking reproducible results, this combination supports a steady process window and reduces variance between batches. For ordering or technical advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications and required cutter setups Technical data Article number: LNMU160812-F57T-WSM35G-WALTER Label: Fräswendeschneidplatte LNMU160812-F57T WSM35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Size: 16 mm Corner radius: 1.2 mm Free angle: 0° (negative) Plate thickness: 08 Tolerance class: M Special features Grade: WSM35G (coated carbide) Chipformer: F57T Shape: Rectangular Execution: U Material suitability: S / M (superalloys / rostfreier Stahl) FAQ What materials is this insert suitable for? This rectangular milling insert by Walter Tools is specified for material groups S and M, meaning it is suitable for superalloys and rostfreier Stahl, as indicated by the WSM35G grade. How does the F57T chipformer influence machining? The F57T chipbreaker promotes controlled chip formation and evacuation; with the WSM35G grade and appropriate cutting parameters it helps maintain surface quality and reduces heat buildup at the cutting edge. Is the 0° free angle suitable for interrupted cuts? Yes — the 0° (negative) free angle increases edge support and makes the insert robust under interrupted or heavy-engagement milling typical in roughing operations. What does the designation LNMU160812-F57T indicate? The designation describes the insert geometry (rectangular LNMU), the size (16), the thickness and corner details (0812), and the integrated chipformer (F57T) used in this Walter Tools insert. Which series and coating technology does this grade belong to? The insert belongs to the Tiger·tec Gold series; the WSM35G grade is a coated cemented-carbide variety optimised for heat resistance and stable cutting edges. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU160812-F57T WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WSP45G grade for consistent chip control and extended tool life; the LNMU160812‑F57T insert’s 0° negative rake and 1.2 mm corner radius ensure stable performance across steel, stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the in‑house specialists for application advice. LNMU160812-F57T WSP45G rectangular milling insert — Tiger‑tec Gold coating, Walter Tools A LNMU160812‑F57T WSP45G rectangular milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant superalloys in demanding production environments Tiger‑tec Gold PVD coating for long tool life Versatile WSP45G grade for P / M / S materials Rectangular 16 size with 1.2 mm corner radius 0° negative rake for stable chip control High productivity through coating and grade selection The combination of the Tiger‑tec Gold coating and the WSP45G grade provides a measurable increase in process stability and tool life. The PVD‑based coating improves temperature resistance and reduces flank wear, while the WSP45G composition is optimised for mixed‑material production runs. As a result, the insert supports higher cutting parameters with consistent surface finish and fewer tool changes — a clear advantage for batch production and mixed‑material machining. Reliable chip control and edge security for demanding materials Built with a chipbreaker F57T and a 0° negative rake, the insert promotes controlled chip formation even when machining sticky or heat‑prone materials. The 1.2 mm corner radius helps to distribute cutting forces and resist chipping, which secures the cutting edge during interrupted cuts and roughing passes. This makes the insert particularly suitable where stable machining of steel, stainless steels and superalloys is required. Flexibility and reduced process risk in daily operations The rectangular form factor and the material compatibility marked P / M / S give shopfloor planners a versatile tool for a broad workpiece mix. The insert’s properties reduce the likelihood of built‑up edge on stainless steels and support stable cutting on titanium and nickel‑based alloys by combining heat resistance and edge strength. This balance lowers process risk and contributes to predictable cycle times and consistent results. Contact Metav Werkzeuge for tailored application guidance or to request a technical quote for the Walter Tools LNMU160812‑F57T WSP45G milling insert. Technical data Article number: LNMU160812-F57T-WSP45G-WALTER Label: Fräswendeschneidplatte LNMU160812-F57T WSP45G Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Facts Corner radius: 1.2 mm Plate size: 16 Plate thickness: 08 Rake angle: 0° (negativ) Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Chipbreaker: F57T Shape: Rectangular Material suitability: P / M / S (steel, stainless steels, superalloys/titanium) Execution: U FAQ What materials can be machined with this insert? The LNMU160812‑F57T WSP45G insert is suitable for P / M / S material groups, meaning it is designed for steel, stainless steels and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold PVD coating increases thermal resistance and reduces wear, giving the WSP45G grade extended life and more stable machining across varied production runs. What is the effect of the 0° negative rake? A 0° negative rake provides a more robust cutting edge and improved chip control, which is advantageous for interrupted cuts and heavy roughing operations. Which chipbreaker is integrated and what is its purpose? The insert features the chipbreaker F57T, designed to promote short, manageable chips and avoid entanglement or poor evacuation in both continuous and interrupted cutting. Is the rectangular form preferred for specific milling tasks? The rectangular form with a 1.2 mm corner radius offers strength and reliable edge support, particularly useful in face milling and shoulder milling where rigidity and edge stability are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used solely for explanatory purposes and do not indicate any affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
LNMU201012-F57T WKP25S Wendeplatten - Walter Tools
Benefit from a balance of high productivity, broad material coverage and robust edge stability to keep machining processes running reliably; order or request tailored cutting data via Metav Werkzeuge when required. LNMU201012-F57T WKP25S indexable milling insert by Walter Tools — Tiger·tec Silver, for steel and cast iron (F57T) The LNMU201012-F57T WKP25S is a rectangular indexable milling insert designed for heavy-duty and general-purpose milling of steel and cast iron, offering a wear-resistant coating and an optimised chipbreaker for stable, repeatable performance. Tiger·tec Silver coating technology Optimised chip control with F57T chipbreaker Rectangular 20 mm insert with 1.2 mm corner radius Negative rake 0° for robust cutting Increased process efficiency through advanced coating and grade The Tiger·tec Silver coating combined with the WKP25S grade provides a measurable improvement in wear resistance and thermal stability when machining ferrous materials. Designed for ISO group P (steel) and K (cast iron), the insert's coated cemented carbide substrate resists abrasive wear and reduces crater formation under typical steel cutting temperatures. This results in longer edge life, fewer indexings and a more predictable tool cycle — advantages that directly support higher throughput and lower per-part tooling costs. Stable cutting edge geometry for consistent surface quality A rectangular plate form with a 1.2 mm corner radius and a 0° (negative) free angle gives a strong, supporting cutting edge that tolerates interrupted cuts and heavy radial engagement. The geometry promotes consistent workpiece finish while protecting the cutting edge from mechanical overload. For operations where robustness matters more than the smallest achievable corner radii, this configuration reduces the risk of premature edge chipping and maintains dimensional accuracy over longer tool life. Reliable chip control and reduced downtime The F57T chipbreaker is engineered to manage the typical chip forms of steel and cast iron, producing short, controlled chips that evacuate reliably from the cut. Better chip control lowers the chance of surface re-cutting and tool interference, which in turn reduces machine stoppages for cleaning and rework. The combination of grade and chipbreaker therefore not only improves machining stability but also simplifies process parameters, making it easier to establish repeatable cutting data for series production. Practical applications and integration into milling systems Suited for a range of milling operations on unalloyed and alloyed steels as well as grey and nodular cast irons, this insert is appropriate for slotting, face milling and shoulder milling where a robust edge and consistent chip control are required. The plate thickness and 20 mm seat dimension allow straightforward integration into standard rectangular cutter bodies that accept this ISO-style designation. For process planners, the clear ISO material group alignment and the proven Tiger·tec Silver technology enable quick selection and reduced trial time during process development. Contact Metav Werkzeuge for specific cutting data, availability and an application consultation tailored to Walter Tools LNMU201012-F57T WKP25S and production requirements Technical data Article number: LNMU201012-F57T-WKP25S-WALTER SKU: LNMU201012-F57T-WKP25S-WALTER Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: F57T Facts Plate form: Rectangular Plate size: 20 mm Plate thickness: 10 mm Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Special features Suitable for ISO P (steel) and ISO K (cast iron) Coated cemented carbide grade Robust edge for interrupted cuts Designed for process-stable milling applications Manufacturer: Walter Tools FAQ What materials is this insert designed to machine? The LNMU201012-F57T WKP25S insert from Walter Tools is intended for machining steel (ISO group P) and cast iron (ISO group K), reflecting the grade's optimisation for those material families. What is the advantage of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP25S grade improves wear resistance and thermal stability, providing more consistent tool life and fewer unscheduled indexings during serial milling. How does the F57T chipbreaker affect machining? The F57T chipbreaker produces short, controlled chips for both steel and cast iron, reducing the chance of re-cutting and improving evacuation, which helps maintain stable cutting conditions and surface quality. Why is the 0° negative free angle beneficial? A 0° (negative) free angle creates a stronger cutting edge that better resists mechanical shock and edge chipping, making the insert suitable for heavy engagement and interrupted cuts. Can this insert be used in standard rectangular cutter bodies? Yes, the 20 mm rectangular form and 10 mm thickness correspond to common cutter seat geometries for this ISO-style designation, allowing straightforward replacement in compatible milling bodies. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned manufacturers. The described article is an original, factory-new product of the manufacturer. Manufacturer: Walter Tools; part of the Sandvik Group. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
LNMU201012-F57T WKP35S Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger‑tec Silver coating and the WKP35S carbide grade for reliable wear resistance and consistent chip control in steel and cast‑iron milling. The robust rectangular geometry with a 1.2 mm corner radius and a 0° negative rake provides stable cutting behaviour and repeatable edge life. Order directly via Metav Werkzeuge or request application-specific data from the technical team. LNMU201012-F57T WKP35S milling indexable insert by Walter Tools — Tiger‑tec Silver, rectangular geometry LNMU201012-F57T WKP35S is a rectangular milling indexable insert designed for productive machining of steel and cast iron with the Tiger‑tec Silver coating system Tiger‑tec Silver coating for extended life WKP35S grade tuned for steel and cast iron Rectangle form with 1.2 mm corner radius Chipbreaker F57T for controlled chip formation Longer tool life and consistent edge performance from advanced coating The combination of the Tiger‑tec Silver coating and the WKP35S carbide grade delivers predictable wear behaviour under typical steel and cast‑iron cutting conditions. Coating technology reduces flank wear and maintains the cutting edge temperature within acceptable limits, which translates into longer usable life of the insert and fewer indexings. For process planning, this means improved tool‑life forecasts and fewer unscheduled tool changes, supporting a steady production flow and reduced machine downtime. Reliable chip control and surface quality for demanding operations The integrated chipbreaker F57T is engineered to shape chips reliably during roughing and semi‑finishing passes in both steel and cast iron workloads. Controlled chip formation reduces the risk of built‑up edge and improves surface finish consistency, lowering the need for secondary operations. The negative rake geometry of 0° enhances cutting stability when interrupted cuts or heavy engagement are encountered, providing more predictable machining performance in batch and single‑part production alike. Geometry and tolerance for process stability and repeatability Rectangular form and a 1.2 mm corner radius ensure a balance between strength and accessibility in corner profiles. The insert thickness of 10 mm and tolerance class M contribute to secure clamping and repeatable positioning in standard indexable cutter bodies. Such geometric consistency supports higher spindle speeds and feed rates without compromising the cutting edge life, making the insert suitable for shops prioritising productivity and reproducible component quality. Practical applicability and material scope Classified for ISO groups P (steel) and K (cast iron), this insert is intended for a broad spectrum of ferrous materials encountered in general machining. Its material compatibility and coated substrate make it appropriate for applications where abrasive wear and variable chip breakage behaviour are expected. The insert’s design supports both conventional and climb milling strategies in face and peripheral milling operations when paired with suitable cutters. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools Tiger‑tec Silver WKP35S inserts Technical data Article number: LNMU201012-F57T-WKP35S-WALTER Designation: LNMU201012-F57T WKP35S Brand: Walter Tools Core specifications Geometry: Rectangle Size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Design & application Coating / series: Tiger‑tec Silver Grade / sort: WKP35S Chipbreaker: F57T Tolerance class: M Material compatibility: Steel (P), Cast iron (K) Execution: U Product type: Milling indexable insert FAQ What materials is this insert suitable for? The LNMU201012‑F57T WKP35S insert by Walter Tools is specified for steel (P) and cast iron (K) in accordance with its Tiger‑tec Silver coated carbide formulation. How does the chipbreaker affect machining? The F57T chipbreaker on the WKP35S grade produces controlled chip forms that reduce the likelihood of built‑up edge and support a consistent surface finish during both roughing and semi‑finishing. Can the insert handle interrupted cuts? The rectangular geometry with a 0° negative rake and a 1.2 mm corner radius offers enhanced stability suited to interrupted cuts and heavy engagements in milling operations. Is the insert compatible with standard indexable cutter bodies? Yes, the LNMU201012‑F57T WKP35S is a standard indexable insert size intended for use in compatible cutter bodies that accept 20 mm by 10 mm rectangular inserts and tolerance class M mounting. What benefit does Tiger‑tec Silver provide? Tiger‑tec Silver coating improves wear resistance and thermal stability of the cutting edge, yielding longer tool life and more consistent performance across repetitive production runs. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Tel: not provided Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for identification and explanation. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered item is an original, factory‑new product of the named manufacturer.
LNMU201012-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating and the WPP35G grade for robust wear resistance in steel milling, combined with a 1.2 mm corner radius and a rectangular form for stable cutting performance; order the LNMU201012‑F57T WPP35G insert directly via Metav Werkzeuge or ask our consultants if needed LNMU201012‑F57T WPP35G milling insert (for steel) — Walter Tools, Tiger‑tec Gold, rectangular, 1.2 mm The LNMU201012‑F57G WPP35G is a rectangular milling insert developed for machining steel under the Tiger‑tec Gold technology; it combines a robust coated carbide grade with a dedicated chipbreaker for stable, repeatable performance Tiger‑tec Gold coating for long tool life WPP35G grade optimised for steel cutting Rectangular insert with 1.2 mm corner radius Negative rake 0° and F57T chipbreaker for stability High productivity through a coating and grade tuned to steel The combination of Tiger‑tec Gold coating and the WPP35G carbide grade targets the thermal and mechanical demands of steel machining (ISO P). The coating reduces flank and crater wear, while the grade balances toughness and hardness so the edge resists chipping under interrupted cuts. The integrated F57T chipbreaker supports consistent chip formation and evacuation, which helps to maintain cutting parameters for longer periods and reduces unscheduled tool changes. This results in measurable productivity advantages such as higher machine uptime and more predictable tool life. Geometry and edge design that improve process security A rectangular plate form with a 1.2 mm corner radius and a 0° (negative) rake creates a mechanically robust cutting edge suited to medium and heavy milling passes. The negative rake increases edge strength and helps to absorb impact loads, while the corner radius contributes to improved surface integrity and reduced micro‑chipping. The plate thickness and form add stability in the toolholder, which reduces vibration and supports repeatable chip formation. Together, these geometric features deliver stable cutting and a consistent surface finish for serial production tasks. Clear application scope and benefits for workshop workflows Designed for steel applications, this insert is classified for the ISO P group and excels where balanced wear resistance and toughness are required. The technical combination reduces the frequency of index changes and lowers process variability, supporting cost‑effective machining over production cycles. In practical terms, the insert aids in achieving consistent dimensional accuracy and surface quality, making it suitable for component milling where reliability and repeatability are key. The Walter Tools Tiger‑tec Gold series provides a pragmatic option for shops aiming to enhance throughput while keeping process risks low. Contact Metav Werkzeuge for specialist advice and to secure the Walter Tools Tiger‑tec Gold LNMU201012‑F57T WPP35G insert for steel machining; email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: LNMU201012-F57T-WPP35G-WALTER SKU: LNMU201012-F57T-WPP35G-WALTER Designation: LNMU201012-F57T WPP35G Series: Tiger-tec Gold Facts Plate size: 20 Plate thickness: 10 Corner radius: 1.2 mm Free angle: 0° (negative) Special features Grade: WPP35G Chipbreaker: F57T Plate form: Rectangular Execution: U Tolerance class: M Material application: Steel (ISO P) FAQ Which materials is this insert suited for? The LNMU201012‑F57T WPP35G insert is specified for machining steel in the ISO P group and is engineered to handle the heat and chip formation typical of these materials. What does the WPP35G grade indicate? WPP35G denotes Walter Tools’ coated carbide grade within the Tiger‑tec Gold family, optimised for a balance of wear resistance and toughness in steel applications. How does the F57T chipbreaker affect machining? The F57T chipbreaker promotes controlled chip formation and evacuation, improving stability and allowing longer periods between index changes when using the LNMU201012‑F57T insert. Why choose a negative rake of 0° for this insert? A 0° negative rake provides a stronger cutting edge and higher resistance to impact, which enhances process security during heavier milling operations with this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer.
LNMU201012-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the robust WSP45G grade for dependable chip control and extended tool life in demanding milling operations; the combination of a 1.2 mm corner radius and 0° (negative) rake delivers excellent edge strength and process stability. Order the insert via Metav Werkzeuge or consult our specialists for application advice. LNMU201012‑F57T WSP45G milling insert (Tiger‑tec Gold) — Walter Tools LNMU201012‑F57T WSP45G is a rectangular milling insert designed for versatile milling of steel, rostfreier Stahl and heat‑resistant alloys Tiger‑tec Gold PVD coating for long life Versatile for P / M / S applications Robust edge with 1.2 mm corner radius High‑performance grade for mixed machining The WSP45G grade, part of the Tiger‑tec Gold series, is a coated carbide developed for resilient and versatile performance in milling. As a PVD‑coated grade it balances wear resistance with toughness, which supports consistent cutting performance when machining a range of materials. The designation P / M / S indicates suitability for steel (P), rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S); this breadth reduces tool variants in a mixed production environment and improves process economy. The coated surface promotes stable chip formation and reduces built‑up edge, contributing to longer indexable life and fewer tool changes. Geometry engineered for edge stability and repeatable results The rectangular form with a 1.2 mm corner radius and a 0° (negative) clearance angle gives a strong cutting edge able to withstand interrupted cuts and heavy engagement. A thicker body (10 mm) and the defined 20 mm edge length provide secure clamping and reduced insert deflection, which improves dimensional repeatability and surface quality. The integrated F57T chipbreaker is tuned for controlled chip flow in slotting and shoulder milling, helping to avoid entanglement and enabling predictable evacuation even under variable cutting conditions. Productivity and surface quality in everyday milling Thanks to the grade chemistry and the Tiger‑tec Gold coating, this insert delivers reliable surface finish and stable tool life under industrial cycle times. The combination of coating and geometry reduces downtime through fewer regrinds and replacements, which supports continuous production and cost efficiency. Where high process reliability and consistent part quality are required, the insert offers a balance between aggressive cutting ability and edge security—suitable for both roughing operations that demand edge strength and finishing passes that require a fine surface result. Contact Metav Werkzeuge to discuss the Walter Tools LNMU201012‑F57T WSP45G insert and arrange a tailored supply for specific milling tasks Technical Data SKU: LNMU201012‑F57T‑WSP45G‑WALTER Product: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools / Walter Deutschland GmbH Grade: WSP45G Series: Tiger‑tec Gold Material designation: P / M / S Facts Insert size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Rake / clearance: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD coated carbide) Shape: rectangular Chipbreaker: F57T Execution: U ISO designation: LNMU201012‑F57T WSP45G FAQ What materials can this insert machine effectively? The insert is specified for P / M / S groups: steel (P), rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S), making it suitable for a wide range of production applications. Is the chip control suitable for mixed finishing and roughing? Yes. The F57T chipbreaker and the WSP45G grade provide controlled chip formation that supports both finishing passes and more aggressive roughing operations. How does the 0° (negative) clearance angle affect performance? A 0° (negative) clearance increases edge strength and resistance to mechanical shock, which is beneficial for interrupted cuts and high‑load milling tasks. Can this insert be used where high temperatures occur during machining? The Tiger‑tec Gold PVD coating and the grade composition improve thermal resistance and edge stability, which helps when machining materials that generate significant heat. Which Walter Tools series does this insert belong to and why is that relevant? This insert belongs to the Tiger‑tec Gold series; that coating technology emphasises a balance between wear resistance and toughness for reliable, productive milling. Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMU201012T-F27T WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP35S carbide grade for reliable wear resistance and predictable tool life; the rectangular LNMU201012T-F27T geometry with a 1.2 mm corner radius and 0° (negative) rake delivers secure cutting stability in demanding operations. Order this insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. LNMU201012T-F27T WKP35S – Milling indexable insert, Tiger‑tec Silver coating, for steel and cast iron (Walter Tools) The LNMU201012T-F27T WKP35S is a rectangular milling indexable insert engineered for machining steel and cast iron with a Tiger‑tec Silver coated carbide grade, optimised for consistent edge life and process stability Tiger‑tec Silver coated carbide grade WKP35S Optimised for steel (P) and cast iron (K) Rectangular geometry with 1.2 mm corner radius Negative 0° rake for secure cutting stability Increased throughput through predictable edge life The Tiger‑tec Silver coating combined with the WKP35S grade offers improved wear resistance and thermal stability, which translates into longer intervals between index changes and reduced downtime. This insert is designed to maintain a consistent cutting edge, so cutting parameters can be run with confidence and cycle times remain steady. The result is measurable productivity gains in series production without compromising surface quality. Reliable performance when machining steel and cast iron Designed specifically for the P and K material groups, the insert supports efficient chip formation for steel (P) and manages the abrasive behaviour typical of cast iron (K). The coated carbide substrate handles the heat and mechanical loads characteristic of steel turning and milling, reducing flank wear and improving repeatability. This makes the insert a sound choice where material variability and thermal load demand a robust grade. Geometry that enhances process security and stability The rectangular plate form with a 1.2 mm corner radius and 0° (negative) rake provides a stable cutting edge that resists cratering and vibration in interrupted cuts. The integrated chipbreaker F27T promotes controlled chip breakage and evacuation, reducing the risk of built‑up edge and helping to protect the workpiece surface. The 10 mm plate thickness contributes to rigidity, supporting higher feed rates with reduced deflection. Practical selection and application benefits Specification and selection are straightforward thanks to the clear designation and series information: the Tiger‑tec Silver family and the WKP35S grade identify the coating technology and intended application. This simplifies inventory management and makes it easier to match the insert to suitable tool holders and machine capabilities. For complex or high‑volume production, a short consultation can confirm the ideal cutting data and holder geometry to maximise tool life and part quality. Request an application consultation from Metav Werkzeuge to specify Walter Tools’ Tiger‑tec Silver LNMU201012T‑F27T WKP35S insert for demanding steel and cast iron milling operations Technical Data Article number: LNMU201012T-F27T-WKP35S-WALTER Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Geometry: LNMU201012T-F27T Facts Plate size: 20 mm Plate thickness: 10 mm Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Special features Rectangular plate form Chipbreaker: F27T Coating: Tiger‑tec Silver (coated carbide) Material suitability: P (steel), K (cast iron) FAQ Which materials is this insert suitable for? The LNMU201012T‑F27T WKP35S is specified for the P and K groups, meaning it is suitable for steel (P) and cast iron (K) applications when using the Walter Tools Tiger‑tec Silver grade. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, which helps the insert deliver longer life and more consistent cutting performance. How does the chipbreaker F27T affect machining? The integrated chipbreaker F27T promotes controlled chip formation and evacuation, reducing the chance of built‑up edge and improving surface finish during milling. Is the negative 0° rake important for interrupted cuts? Yes; the 0° (negative) rake increases edge strength and contributes to cutting stability, which is particularly beneficial in interrupted or heavy milling operations. What is the exact product designation and SKU? The product is designated LNMU201012T‑F27T WKP35S (milling indexable insert) and the SKU is LNMU201012T‑F27T‑WKP35S‑WALTER. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the brands named. The offered article is an original, factory‑new product of Walter Tools.
LNMU201012T-F27T WPP35G WPP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP35G grade ensures dependable wear resistance and stable chip formation for steel machining, while the F27T chipbreaker delivers reliable chip control; take advantage of these strengths for consistent productivity. Order the LNMU201012T-F27T WPP35G milling insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. LNMU201012T-F27T WPP35G rectangular milling insert with Tiger‑tec Gold coating — Walter Tools the LNMU201012T-F27T WPP35G is a rectangular indexable milling insert designed for robust steel machining, combining a wear-resistant coated grade and a dedicated chipbreaker for controlled metal removal Tiger‑tec Gold coated for extended tool life Grade WPP35G optimised for steel machining Robust 0° negative rake with 1.2 mm corner F27T chipbreaker for controlled chip formation High wear resistance for consistent steel performance The WPP35G grade, based on the Tiger‑tec Gold coating technology, is formulated for machining steel and addresses the typical heat and chip-formation challenges encountered in general steel turning and milling. This coated carbide offers improved surface hardness and adhesion, which translates into longer tool life and fewer tool changes. For production environments seeking reliable repeatability, the coated grade reduces flank and crater wear, supporting stable cutting parameters over extended cycles. Geometry and edge design that improve stability and surface finish A 0° (negative) rake angle combined with a 1.2 mm corner radius and a substantial plate thickness (10 mm) provides high rigidity at the cutting edge. These geometric choices enhance insert strength under moderate to heavy cutting loads and contribute to consistent part quality and surface finish. With tolerance class M and a rectangular 20 mm format, the insert ensures predictable seating and repeatable clamping, helping to maintain dimensional control across batches. Chip control engineered for productive machining The integrated F27T chipbreaker supports efficient chip control, promoting short, manageable chips during a wide range of steel cutting conditions. Effective chip formation reduces the risk of re-cutting and improves heat evacuation from the cut zone, which in turn supports higher average cutting speeds and steadier feeds. As a result, process reliability and overall productivity increase without sacrificing workpiece quality. Practical benefits for workshop and production use This indexable solution suits a variety of conventional and CNC milling operations focused on steel applications. The rectangular format and robust design make the insert suitable for both roughing and semi-finishing tasks where tool life and process stability matter. By combining a proven coated grade with controlled chipbreaking and a sturdy geometry, the insert delivers measurable gains in uptime and lowers the frequency of unscheduled interventions, supporting leaner production workflows. For tailored recommendations or to secure supply of the Walter Tools LNMU201012T-F27T WPP35G, contact Metav Werkzeuge for application advice and ordering — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LNMU201012T-F27T-WPP35G-WALTER Designation: LNMU201012T-F27T WPP35G Product type: milling insert Manufacturer: Walter Tools Facts Insert size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Features Chipbreaker: F27T Grade/series: WPP35G / Tiger‑tec Gold Material application: steel Plate form: rectangular Execution: U FAQ What materials is this insert intended for? The insert LNMU201012T-F27T WPP35G is formulated primarily for steel machining and is optimised for the P workpiece group. How does the Tiger‑tec Gold coating benefit the process? The Tiger‑tec Gold coating on WPP35G increases wear resistance and thermal stability, which in turn extends tool life and supports stable cutting parameters. Is the chipbreaker suitable for mixed cutting conditions? Yes, the F27T chipbreaker on this insert offers controlled chip formation across a range of feeds and depths commonly used in steel milling. What production advantages can be expected from this insert? Using the Walter Tools LNMU201012T-F27T WPP35G typically results in improved process stability, reduced tool-change frequency and better overall productivity in steel machining applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer. The Walter AG (brand: Walter Tools) is one of the worldwide leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
LNMX070204-F57T WKP35S WKP35S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating and the WKP35S grade with a 0° negative rake gives consistent edge stability and effective chip control when machining steel and cast iron. Order the LNMX070204-F57T WKP35S insert directly via Metav Werkzeuge or contact their technical team for tailored cutting data and application advice. LNMX070204-F57T WKP35S rectangular milling insert — Tiger·tec Silver, Walter Tools, 0° negative rake, 0.4 mm corner radius LNMX070204-F57T WKP35S is a rectangular milling insert designed for productive machining of steel and cast iron, combining a coated carbide grade with a chipbreaker optimised for stable cutting. Tiger·tec Silver coated carbide grade WKP35S Suitable for steel (P) and cast iron (K) Rectangular insert with 0.4 mm corner radius 0° negative rake angle for stable cutting Stable cutting and reliable chip control for production work The Tiger·tec Silver WKP35S grade delivers coated carbide performance geared towards consistent wear resistance and predictable cutting behaviour. The combination of the F57T chipbreaker and the rectangular geometry ensures controlled chip formation when machining common structural steels and cast iron. This results in fewer interruptions for chip clearing, longer uninterrupted cutting times and more consistent surface quality — advantages especially relevant for batch and continuous production environments where process stability is critical. Robust edge life through grade and geometry A 0.4 mm corner radius improves edge strength and reduces the risk of premature chipping at interrupted cuts, while the 0° negative rake provides a cutting geometry that favours stability under higher feed rates. These characteristics enable a balance between tool life and productivity: the coated substrate resists abrasive wear typical of cast iron, and the insert geometry supports reliable performance in mixed production runs. The design is therefore well suited for applications requiring repeatable results and low tool-change frequency. Practical benefits and shop-floor adaptability The rectangular format and standardized designation simplify inventory and toolholder selection. The insert’s WKP35S coating technology is optimised for the thermal and mechanical demands of steel and cast iron machining, so machinists and process engineers gain a predictable baseline for cutting data development. When integrated into an established tooling system, the insert contributes to reduced setup times and streamlined tool management — measurable process improvements that support efficient workshop operation. Contact Metav Werkzeuge for cutting-data recommendations, sample availability and application-specific advice for the LNMX070204-F57T WKP35S insert Technical data Article number: LNMX070204-F57T-WKP35S-WALTER Product name: Fräswendeschneidplatte LNMX070204-F57T WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Execution: X Core specifications Insert size: 07 Plate thickness code: 02 Corner radius: 0.4 mm Rake angle: 0° (negativ) Tolerance class: M Chipbreaker: F57T Materials & features Applicable materials: Steel (P), Cast iron (K) Plate form: Rectangular Material designation: P / K ISO designation: LNMX070204-F57T WKP35S Additional info: Coated carbide grade, Tiger·tec Silver technology FAQ What materials is this insert suitable for? The LNMX070204-F57T WKP35S insert is specified for steel (P) and cast iron (K) applications and is designed to handle the typical thermal and abrasive conditions of these material groups. How does the 0° negative rake affect cutting performance? A 0° negative rake improves cutting stability and supports a robust cutting edge, which helps the LNMX070204-F57T WKP35S maintain consistent performance under higher feed rates and more demanding machining conditions. What benefit does the 0.4 mm corner radius provide? The 0.4 mm corner radius increases edge strength to resist chipping, particularly at interrupted cuts, enhancing the insert’s service life and contributing to more consistent surface finish during production. Which chipbreaker is used and why is it important? The insert features the F57T chipbreaker, optimised for controlled chip formation in steel and cast iron, reducing chip-related interruptions and improving overall machining reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMX070204-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, a Tiger·tec Gold coating and a robust carbide grade for efficient steel machining; order directly via Metav Werkzeuge or consult the technical team for milling optimisation. LNMX070204-F57T WPP35G milling indexable insert — Tiger·tec Gold, Walter Tools The LNMX070204-F57T WPP35G is a rectangle milling indexable insert designed for reliable steel machining with a Tiger·tec Gold coated carbide grade and a negative 0° rake. Tiger·tec Gold coated carbide grade WPP35G Negative 0° rake for secure cutting Rectangle shape with 0.4 mm corner radius Optimised for steel machining (ISO P) Consistent, economical performance for steel machining The Tiger·tec Gold coating combined with the WPP35G carbide grade delivers a balanced mix of wear resistance and toughness tailored to steel (ISO P). This combination reduces flank wear and stabilises the cutting edge, which in turn supports longer tool life and fewer index changes. The negative 0° rake promotes secure cutting under varied feed conditions, lowering the risk of chipping during interrupted cuts. For production environments where cycle time and tool-change intervals affect throughput, these factors translate into measurable improvements in process economy. Secure edge geometry for repeatable surface quality A rectangle form with a 0.4 mm corner radius provides a predictable cutting contour that helps maintain surface finish across long runs. The included F57T chipbreaker is engineered to control chip formation specifically for steels, reducing the likelihood of long, entangling chips and improving evacuation. The insert’s tolerance class M ensures consistent seating and repeatable positioning in the cutter body, contributing to stable dimensional results and reduced rework. Technical users appreciate the clear correlation between edge design and the achieved surface integrity. Easy specification and integration into machining processes The item follows established ISO designation conventions for straightforward specification: LNMX070204-F57T WPP35G. Compatibility with standard tool holders for rectangular inserts simplifies stock management. The coated, cemented carbide composition supports both finishing and medium-depth cutting in unalloyed and alloyed steels, making the insert a versatile choice for job shops and production lines seeking a single-grade solution across multiple P-group applications. Technical explanation: the coating reduces adhesive wear and the substrate provides fracture resistance—this is why the grade performs reliably during typical steel cutting temperatures. Contact Metav Werkzeuge for application advice or to request tailored cutting parameter recommendations for Walter Tools inserts Technical Data Article number: LNMX070204-F57T-WPP35G-WALTER Label: Fräswendeschneidplatte LNMX070204-F57T WPP35G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Facts Grade: WPP35G Series: Tiger·tec Gold Rake angle: 0° (negative) Corner radius: 0.4 mm Plate size: 07 Plate thickness: 02 Tolerance class: M Special features Rectangle plate form Chipbreaker: F57T Execution: X Material designation: P (suitable for steel machining) FAQ What materials is this insert intended for? The LNMX070204-F57T WPP35G is specified for steel (ISO P) applications and is optimised for unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP35G grade reduces adhesive wear and improves thermal stability, which enhances tool life and process reliability when machining steel. Is the insert suitable for interrupted cuts? Yes, the negative 0° rake and robust carbide substrate of the LNMX070204-F57T help resist edge chipping during interrupted cuts, providing a secure cutting edge. Which chipbreaker is supplied with this insert and what is its function? The F57T chipbreaker is integrated to control chip formation specifically for steel machining, improving chip evacuation and reducing the risk of entanglement. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is a leading provider of precision cutting tools and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation with Metav Werkzeuge.
LNMX070204-F57T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant Tiger·tec Gold grade, a stable chipformer geometry and precise tolerance class for reliable machining of stainless steels and superalloys; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. LNMX070204-F57T WSM35G milling indexable insert – Tiger·tec Gold grade for stainless steels and superalloys | Walter Tools The LNMX070204-F57T WSM35G is a rectangular milling indexable insert engineered for secure chip formation and consistent cutting-edge stability when machining rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold coating for heat resistance Optimised for stainless steels and superalloys Stable cutting edge for productive machining Rectangular form with 0.4 mm corner radius Consistent machining under thermal stress The coated carbide grade Tiger·tec Gold in combination with WSM35G provides improved thermal resistance and edge durability when cutting materials that generate heat and tend to work-harden. This composition supports secure chip formation, reduces the risk of built-up edge and leads to fewer interruptions in production. The result is a more predictable process with less scrap and a lower workload for downstream finishing operations. Geometry that controls chips and surface quality A rectangular insert with a dedicated F57T chipbreaker and a 0.4 mm corner radius is designed to moderate chip shape and evacuate swarf reliably. The negative 0° relief angle contributes to a robust cutting edge under heavy engagement, which in turn supports a constant surface quality on demanding materials. These geometric choices enable longer tool life per index and minimise re-grinding or premature tool changes. Broad application range with focused performance The insert’s grade is targeted at ISO groups M and S, making it suitable for rostfreier Stahl (stainless steels) and heat-resistant superalloys or titanium. As a coated carbide solution, the insert balances wear resistance with toughness, allowing productive cutting strategies on materials that dissipate heat poorly. This focused performance helps stabilise cycle times and supports consistent results across batch and prototype production. Accurate fit and repeatable positioning in tool systems Manufactured to tolerance class M, with insert designation size 07 and thickness 02, the component is prepared for reliable clamping and repeatable seating in compatible milling holders. The precise dimensions and standardised form factor reduce setup time and enable quick index changes, contributing to higher overall equipment effectiveness and a smoother production flow. Contact Metav Werkzeuge today to specify Walter Tools Tiger·tec Gold inserts for rostfreier Stahl and superalloy applications and arrange a tailored supply consultation; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: LNMX070204-F57T-WSM35G-WALTER Label: Fräswendeschneidplatte LNMX070204-F57T WSM35G Walter Tools Manufacturer: Walter Tools Data Insert size: 07 Thickness: 02 Corner radius: 0.4 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F57T Shape: rectangular Material application: stainless steel (M), superalloys / titanium (S) FAQ What materials is this insert designed to machine? The LNMX070204-F57T WSM35G is designed primarily for rostfreier Stahl (ISO group M) and for heat-resistant superalloys or titanium (ISO group S), offering thermal stability and secure chip formation on these materials. How does the Tiger·tec Gold grade benefit machining performance? The Tiger·tec Gold coating on this grade improves heat resistance and wear behaviour, which supports a stable cutting edge and extended performance time under demanding cutting conditions. Which geometry features help with chip control? Chip control is enhanced by the F57T chipbreaker, the rectangular shape and the 0.4 mm corner radius, which together promote consistent chip formation and evacuation during milling. Is the insert suitable for finishing operations on stainless steel? Yes; depending on the holder, feed and depth of cut, the grade and geometry can produce consistent surface quality on rostfreier Stahl while maintaining edge stability. What is the SKU and how is compatibility ensured? SKU LNMX070204-F57T-WSM35G-WALTER; the insert follows standard LNMX dimensions (size 07, thickness 02) and tolerance class M for predictable seating in compatible milling toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMX201012R-F27T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools' proven Tiger‑tec Gold coating and a robust coated carbide substrate for reliable, productive milling of steel and cast iron; the rectangular 20 mm insert with 1.2 mm corner radius and F27T chipbreaker ensures stable chip control and long tool life. Order directly via Metav Werkzeuge or consult our specialists for material- and application-specific recommendations. LNMX201012R-F27T WKP35G milling insert — Tiger‑tec Gold coating, for steel and cast iron (Walter Tools) The LNMX201012R-F27T WKP35G is a rectangular milling insert designed for productive face and shoulder milling of steel and cast iron, combining a Tiger‑tec Gold coated carbide grade with a dedicated chipbreaker geometry for consistent performance. Tiger·tec Gold coated carbide for long tool life Designed for steel and cast iron machining Rectangular 20 mm plate with 1.2 mm corner radius F27T chipbreaker for consistent chip control Improved productivity through optimised coating and grade The Tiger‑tec Gold coating and the WKP35G grade form a balanced system aimed at extending tool life and maintaining edge stability under cyclic loads. The multi‑layer coating reduces abrasive wear and improves resistance to thermal shock, which translates into fewer tool changes and higher machine uptime. In practical terms, this means more efficient cycle times and lower overall machining cost per component when working in demanding steel and cast iron applications. Reliable chip control and stable cutting geometry Equipped with the F27T chipbreaker and a 0° negative rake, the insert delivers consistent chip formation and evacuation in a wide range of cutting parameters. The rectangular plate format with a 1.2 mm corner radius supports robust engagement at moderate depths of cut, helping to avoid unexpected tool deflection. These features together ensure predictable surface finish quality and process stability, particularly beneficial in production environments where repeatability is essential. Versatility for common industrial materials The insert is specified for ISO groups P (steel) and K (cast iron), reflecting its suitability for both unalloyed and alloyed steels as well as abrasive cast materials. The coated carbide substrate balances wear resistance and fracture toughness, making the part a practical choice for mixed production runs where flexibility and consistent performance are required. Clear identification of material applicability simplifies tool selection and process planning on the shop floor. Contact Metav Werkzeuge for application advice, cutter matching and availability of the Walter Tools LNMX201012R-F27T WKP35G milling insert Technical Data Article number: LNMX201012R-F27T-WKP35G-WALTER Designation: LNMX201012R-F27T WKP35G Manufacturer: Walter Tools Product type: milling insert Facts Plate size: 20 mm Plate thickness: 10 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating/series: Tiger‑tec Gold Carbide grade: WKP35G (coated carbide) Chipbreaker: F27T Plate form: rectangular Applicable materials: steel (P), cast iron (K) FAQ What materials is this insert suitable for? The LNMX201012R-F27T WKP35G insert is specified for steel (ISO group P) and cast iron (ISO group K) applications and is optimised for those material classes. Which chipbreaker is fitted and what benefit does it provide? This insert uses the F27T chipbreaker, which ensures consistent chip breakage and improved evacuation for stable milling performance in mixed production tasks. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating increases resistance to abrasive wear and thermal stress, resulting in improved edge life and more reliable component quality over extended machining cycles. Is the insert suitable for heavy interrupted cuts? The combination of a coated WKP35G grade, rectangular geometry and a 1.2 mm corner radius gives good robustness for moderately interrupted cuts; suitability for very heavy interruptions should be validated with process trials. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, new product from the manufacturer.
LNMX201012R-F27T WKP35S Wendeplatten - Walter Tools
High wear resistance and consistent chip control make this insert suitable for serial machining of steel and cast iron; the Tiger‑tec Silver coated WKP35S grade ensures long tool life and reliable edge stability. Order the LNMX201012R‑F27T‑WKP35S insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. LNMX201012R-F27T WKP35S milling indexable insert — Tiger‑tec Silver coated grade for steel and cast iron, Walter Tools The LNMX201012R-F27T WKP35S is a rectangular milling insert engineered for robust roughing and medium-finishing operations on steel and cast iron, combining a proven chipbreaker with a 0° negative rake for secure cutting performance. Tiger‑tec Silver coated carbide grade WKP35S Optimised F27T chipbreaker for stable chips Rectangular form with 1.2 mm corner radius 0° negative rake for heavy‑duty roughing Increase throughput with consistent wear resistance The combination of the Tiger‑tec Silver coating and the WKP35S carbide composition is designed to deliver stable wear behaviour under the thermal and mechanical stresses typical of machining steel and cast iron. This results in longer tool life and fewer index changes, which directly reduces machine idle time and tooling costs. The coating technology improves resistance to abrasive wear and helps maintain a sharp cutting edge, so frequent regrinding or premature replacement is avoided. For production environments seeking predictable process control, this insert supports consistent component quality over extended tool cycles. Optimised chip control and secure cutting action Thanks to the F27T chipbreaker and the 0° negative rake, chip formation is controlled even under interrupted or heavy cuts, reducing the risk of built‑up edge and unstable chip evacuation. The 1.2 mm corner radius provides a balance between edge strength and surface finish, allowing sheltered edges to resist shock loads while still delivering acceptable part quality. Improved chip flow lowers the chance of recutting and reduces secondary operations, which benefits both cycle time and operator safety. The insert’s geometry aids in achieving reproducible surface integrity with fewer process adjustments. Robust format and straightforward integration into tool systems The rectangular shape and the solid 10 mm thickness ensure mechanical rigidity for demanding milling tasks; the nominal 20 mm size and tolerance class M allow for accurate seating and repeatable positioning in standard toolholders. The grade is specified for material groups P (steel) and K (cast iron) according to ISO classifications, which simplifies tool selection for mixed‑material production runs. With this insert, set‑up time is reduced and clamping stability is enhanced, which supports higher feed rates and productive metal removal. The execution marked as X denotes the standard configuration delivered for common industrial tool sets. For production‑critical applications, request detailed recommendations for Walter Tools Tiger‑tec Silver inserts from Metav Werkzeuge; contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for cutting‑data recommendations and application support. Technical Data SKU: LNMX201012R-F27T-WKP35S-WALTER Product type: milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Insert length: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Silver Substrate: coated carbide Applicable materials: Steel (P) and Cast iron (K) Chipbreaker: F27T Shape: rectangular Execution: X FAQ Which materials are recommended for this insert? The LNMX201012R‑F27T WKP35S insert from Walter Tools is specified for steel (P) and cast iron (K) applications and is formulated to handle the typical chip and heat behaviours of those groups. What benefits does the Tiger‑tec Silver coating offer? Tiger‑tec Silver on the WKP35S grade provides enhanced abrasion resistance and improved edge security, extending tool life and supporting stable cutting for high‑volume production with the Walter Tools insert. How does the F27T chipbreaker affect machining? The F27T chipbreaker promotes controlled chip formation and evacuation, reducing recutting and improving surface consistency when the LNMX201012R‑F27T insert is used in intermittent or heavy‑cut milling. Is the 0° negative rake suitable for roughing? Yes, the 0° negative rake increases edge strength and mechanical stability, making the insert particularly suitable for heavy‑duty roughing operations and interrupted cuts. What mounting accuracy can be expected with this insert? With a tolerance class M and a rectangular format, the insert offers repeatable seating and stable clamping for consistent tool positioning in compatible holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com