LNMX201012R-F57T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for reliable wear resistance and stable chip control; the rectangular 20 mm insert with a 1.2 mm corner radius and negative 0° rake ensures secure cutting at higher material loads. Order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge's specialists for application support and process optimisation. LNMX201012R-F57T WKP25S — Indexable milling insert, Tiger‑tec Silver (Walter Tools) The LNMX201012R-F57T WKP25S is a rectangular indexable milling insert engineered for productive machining of steel and cast iron in industrial milling operations. Tiger‑tec Silver coated carbide for robust wear resistance Optimised chipformer F57T for reliable chip control Rectangular design with 1.2 mm corner radius Negative 0° rake for secure cutting stability Increased process reliability through a modern coated grade The Tiger‑tec Silver coating paired with the WKP25S grade provides improved resistance against abrasive wear and thermal loading compared with conventional grades, which translates into longer tool life and fewer tool changes. The coating is a multilayer, PVD-enhanced system applied to a coated carbide substrate; this combination stabilises the cutting edge and reduces flank wear when machining ISO P and K groups (steel and cast iron). For production environments, that means more predictable tool-life windows and less downtime for tool replacement. Stable chip control and surface quality with the F57T chipformer An optimised F57T chipformer and the negative 0° rake geometry promote controlled chip breaking and evacuation, especially important when processing short, brittle chips from cast iron or long, stringy chips from certain steels. The controlled chip flow decreases the risk of built-up edge and improves surface finish, so fewer downstream processes are required. In practical terms, stable chip control supports higher feed rates and consistent workpiece quality across batches. Simple integration and versatile application for machining lines The rectangular plate form with a 1.2 mm corner radius, a 20 mm plate size and 10 mm thickness offers mechanical robustness and repeatable seat contact in common milling bodies. The insert is specified for steel (P) and cast iron (K) according to ISO classifications, enabling straightforward inventory management for mixed-material jobs. The combination of geometry and grade reduces process variability and supports productive milling cycles, while the M tolerance class ensures interchangeability and precise seating in toolholders. For reliable high‑volume milling with Walter Tools' Tiger‑tec Silver grade, contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the LNMX201012R-F57T WKP25S and its best fit in existing toolsets. Technical Data SKU: LNMX201012R-F57T-WKP25S-WALTER Label: Fräswendeschneidplatte LNMX201012R-F57T WKP25S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Plate form: Rectangular Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Grade: WKP25S Chipbreaker: F57T Material suitability: Steel (P) and Cast iron (K) Execution: X FAQ What materials is this insert suitable for? The LNMX201012R-F57T WKP25S is designed for machining steel (ISO group P) and cast iron (ISO group K), using the Tiger‑tec Silver coated WKP25S grade for balanced wear resistance. How does the F57T chipformer improve performance? The F57T chipformer on this insert shapes and breaks chips consistently, improving evacuation and surface finish; this chip control is a key benefit of the LNMX201012R-F57T WKP25S in demanding milling applications. What advantage does the negative 0° rake offer? A negative 0° rake increases cutting-edge strength and stability under heavy loads; the geometry of this insert helps maintain edge integrity during interrupted cuts and heavy‑duty machining. Is this insert compatible with standard rectangular milling bodies? Yes, the rectangular form, 20 mm plate size and M tolerance class make the insert compatible with many common milling bodies that accept LNMX-style plates. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original factory‑new product of Walter Tools.
LNMX201012R-F57T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WKP35G grade and a 1.2 mm corner radius for reliable, high-productivity milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. LNMX201012R-F57T WKP35G indexable milling insert by Walter Tools — Tiger·tec Gold, for steel and cast iron LNMX201012R-F57T WKP35G is a rectangular indexable milling insert designed for productive machining of steel and cast iron, combining a robust geometry with a high-performance coating for demanding industrial applications. Tiger·tec Gold coating for high wear resistance Rectangular insert with 1.2 mm corner radius Negative 0° clearance for rigid milling Suited for machining steel and cast iron Consistent productivity with a premium coating The combination of the Tiger·tec Gold series and the WKP35G grade delivers a clear advantage in terms of wear resistance and tool life. The applied coating technology is engineered to withstand the thermal and abrasive stresses typical of steel and cast iron machining, which means longer intervals between indexings and fewer tool changes. For production environments this directly translates into higher machine uptime and lower cycle times, supporting a more economical machining process without compromising surface quality. Geometry engineered for stable cutting performance The insert’s rectangular form and 1.2 mm corner radius offer a stable cutting edge and predictable chip formation. The negative 0° clearance provides a rigid seat and reduces deflection when taking heavier cuts, making this geometry particularly suitable for interrupted cuts or roughing passes where stability is critical. The specified geometry helps maintain dimensional consistency across batches, reducing rework and improving first-pass yield on component families. Broad material compatibility and process reliability Certified for ISO material groups P (steel) and K (cast iron), this insert is optimised for the thermal and mechanical behaviour of those workpiece families. The WKP35G substrate and coating pairing supports controlled heat management and chip breaking with the included F57T chipbreaker, which improves evacuation and reduces the risk of built-up edge in tougher alloys. The result is a balanced combination of cutting-edge stability and chip control for reproducible results in mixed-production shops. Integration into existing tool systems and overall economy The insert is supplied in a standard profile compatible with common milling bodies and clamping systems, enabling straightforward replacement and quick setup. With its robust wear characteristics and consistent edge performance, the insert contributes to lower tooling consumption and predictable tool-life scheduling. This makes it a pragmatic choice for job-shop and serial production environments seeking measurable improvements in throughput and process security. Contact Metav Werkzeuge for tailored cutting data, toolholder compatibility checks and to place orders for Walter Tools Tiger·tec Gold inserts via Metav Werkzeuge Technical data Article number: LNMX201012R-F57T-WKP35G-WALTER SKU: LNMX201012R-F57T-WKP35G-WALTER Designation: LNMX201012R-F57T WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Insert size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F57T Insert form: Rectangular Grade material suggestion: P / K Execution: X Applicable for: steel machining Applicable for: cast iron machining FAQ What workpiece materials is this insert suitable for? The LNMX201012R-F57T WKP35G insert from Walter Tools is specified for ISO groups P and K, i.e. steel and cast iron applications, and is optimised for the typical heat and chip-formation behaviour of those materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, extending tool life and maintaining cutting-edge integrity during sustained production runs. Is the chipbreaker included suitable for heavy roughing? The supplied F57T chipbreaker is designed to improve chip control for a wide range of cutting conditions; for aggressive roughing parameters, the geometry and negative 0° relief of the insert provide the required stability. Can this insert be used in existing milling bodies? The rectangular LNMX geometry follows common indexable insert standards and can be integrated into compatible milling bodies and clamping systems designed for this designation. What are the principal benefits for production shops? Shops benefit from longer tool life, consistent surface finish, reduced tool-change frequency and improved process reliability when using the Walter Tools WKP35G Tiger·tec Gold insert. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking. As part of the Sandvik Group, the company offers a comprehensive range of solutions known for high process security, excellent surface quality and stable cutting edges. Protected trademarks and product names mentioned are the property of their respective owners and are cited for explanation only. The offered item is an original, brand-new product from the manufacturer.
LNMX201012R-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of high process stability and long tool life thanks to the Tiger·tec Gold technology combined with robust chip control and a compact rectangular design; this insert reduces downtime and keeps throughput steady. Order the LNMX201012R-F57T WPP35G milling insert directly via Metav Werkzeuge or ask the consultants for application advice. LNMX201012R-F57T WPP35G milling indexable insert — Tiger·tec Gold, for steel | Walter Tools A LNMX201012R-F57T WPP35G is a rectangular milling insert engineered for reliable steel machining, combining a wear-resistant coating with a defined negative rake for stable heavy cuts Tiger·tec Gold coated for long tool life Designed for steel machining (ISO P) Rectangular insert, 20 mm size Negative 0° rake and 1.2 mm radius Proven coating for longer tool life and consistent results The Tiger·tec Gold coating on this insert is a multi-layer technology that increases abrasion resistance while maintaining edge stability. As a coated carbide grade in the WPP35G family, it is designed to withstand the temperatures and chip formation typical when machining steel. The result is fewer index changes and a predictable wear behaviour, which supports continuous production and reduces process interruptions. This technical reliability translates into measurable uptime advantages on serial milling applications. Geometry and chip control designed for machining stability The insert’s rectangular shape and 20 mm nominal size, combined with a 10 mm thickness and negative 0° rake, provide mechanical strength for demanding milling operations. The integrated chipbreaker F57T optimises chip formation and evacuation, which reduces recutting and tool pressure spikes. A 1.2 mm corner radius balances edge robustness and surface finish, making the geometry suitable for both medium-duty roughing and profile work where consistent dimensions are required. Operational advantages that support productivity targets Tolerance class M assures reproducible seating and repeatability in indexable toolholders, simplifying tool changeovers and reducing setup times. The combination of robust geometry and Tiger·tec Gold surface treatment delivers a competitive life‑time/cost ratio: longer cutting intervals and stable component quality reduce scrap and increase throughput. For production environments prioritising steady cycle times, this insert supports predictable machining windows and process-safe operation. Application range and practical machining guidance This insert is specified for ISO group P and is therefore intended primarily for unalloyed and alloyed steel grades. The WPP35G grade is formulated to cover a broad spectrum of steel workpieces, from general-purpose to tougher steel variants, offering good chip control and edge stability. When integrating the insert into a milling cutter, ensure correct clamping and select cutting parameters aligned with the workpiece alloy and machine rigidity to exploit the insert’s wear resistance and maintain surface quality. Contact Metav Werkzeuge for tailored machining recommendations for the Walter Tools LNMX201012R-F57T WPP35G insert and to arrange prompt delivery or technical consultation by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: LNMX201012R-F57T-WPP35G-WALTER Article designation: LNMX201012R-F57T WPP35G Product type: Milling indexable insert Data Insert size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G Chipbreaker: F57T Shape: Rectangular Execution: X Application group: ISO P (steel) FAQ Which materials is this insert suitable for? The insert is designed for ISO group P and is therefore suitable for machining various steel grades; the WPP35G grade targets common unalloyed and alloyed steels. What is the corner radius and why does it matter? The corner radius is 1.2 mm; this radius offers enhanced edge strength for interrupted and heavy cuts while maintaining an acceptable surface finish. Is the insert coated and what benefit does that provide? Yes, the insert uses Tiger·tec Gold coating (WPP35G), which improves wear resistance and extends tool life under typical steel machining conditions. What does the 0° rake mean for cutting strategy? A negative 0° rake increases edge robustness and stability under load, making the insert suitable for operations with higher radial forces or when tool rigidity is limited. How does tolerance class M affect toolholder seating? Tolerance class M ensures consistent seating accuracy, which supports reproducible results and simplifies replacement during production. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNMX201012R-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, wide material versatility (P / M / S) and a robust negative‑rake geometry to keep milling operations productive and predictable; order the LNMX201012R‑F57T WSP45G insert directly via Metav Werkzeuge or ask the consultants for cutting data and availability. LNMX201012R-F57T WSP45G rectangular milling insert, Tiger·tec Gold – Walter Tools A LNMX201012R‑F57T WSP45G milling insert engineered for versatile finishing and semi‑roughing of Stahl, rostfreier Stahl and high‑temperature alloys. Tiger·tec Gold PVD coating for long tool life Suitable for Stahl, rostfreier Stahl and superalloys 0° negative rake geometry for robust cutting 1.2 mm corner radius; rectangular 20 × 10 mm Consistent performance across demanding materials The Tiger·tec Gold grade WSP45G combines a PVD coating with a tough carbide substrate to deliver thermal stability and improved tool life when machining a broad spectrum of materials. Designed for the typical heat generation and chip formation encountered in Stahl, the grade is likewise adapted to the adhesive tendencies of rostfreier Stahl and the high thermal load from Superalloys and titanium. This balanced combination reduces the frequency of insert changes and supports consistent cycle times in mixed‑material production runs. Coating and chip control that support productivity The Tiger·tec Gold PVD system provides a thin, hard surface layer that enhances wear resistance while maintaining edge stability. In practice, the applied technology improves chip control and resists abrasive and adhesive wear mechanisms during milling. The listed chipbreaker F57T is optimised to produce manageable swarf across finishing and light roughing feeds, which contributes to uninterrupted material removal and a reduced need for secondary operations. Such attributes translate into measurable productivity gains on both medium‑ and high‑volume work. Geometry for secure cutting and repeatability A negative rake of 0° gives the insert a robust cutting edge and helps to withstand heavy interrupted cuts or less favourable clamping conditions. The 1.2 mm corner radius supports a favourable balance between edge strength and achievable surface finish; together with the rectangular plate form and 20 × 10 mm size, the element integrates readily into standard milling toolholders for reliable indexability. Tolerance class M ensures consistent dimensions for predictable tool assembly and repeatable part quality. These geometric choices favour process stability and reduce the risk of premature edge failure. Operational benefits and application fit The combination of a coated carbide grade, the F57T chipbreaker and the negative‑rake geometry makes this insert especially suitable for shops seeking a robust, multi‑purpose option for mixed batches. The design supports both finishing and light to moderate semi‑roughing, reducing inventory complexity by replacing several single‑purpose grades. Where surface integrity and reproducibility are priorities, the insert’s features contribute directly to fewer reworks and steadier throughput. Contact Metav Werkzeuge for tailored cutting data, sample availability and application advice for the Walter Tools LNMX201012R‑F57T WSP45G insert Technical data Article number: LNMX201012R‑F57T‑WSP45G‑WALTER Label: Fräswendeschneidplatte LNMX201012R‑F57T WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Designation: LNMX201012R‑F57T ISO designation: LNMX201012R‑F57T WSP45G UID: LNMX201012R‑F57T‑WSP45G‑WALTER Facts Plate size: 20 mm Thickness: 10 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Material suitability: P / M / S Chipbreaker: F57T Plate form: Rectangular Coating technology: Tiger·tec Gold (PVD coated carbide) Execution: X FAQ Which materials are recommended for this insert? The LNMX201012R‑F57T WSP45G insert is specified for machining Stahl, rostfreier Stahl and Superalloys/titanium, reflecting the P / M / S material classification of the WSP45G grade. What coating and grade does the insert use? The insert employs the Tiger·tec Gold PVD coating on a coated carbide substrate; the cutting grade is WSP45G from Walter Tools and is optimised for toughness and thermal resistance. What are the key geometric parameters to consider? Key parameters are a 0° negative rake, a 1.2 mm corner radius and a rectangular 20 × 10 mm plate form with 10 mm thickness, which together support edge robustness and predictable mounting. Which chipbreaker is fitted and what is its effect? F57T is the fitted chipbreaker; it is designed to promote stable chip formation across finishing and light semi‑roughing operations, aiding in chip evacuation and surface quality. Is the insert suited for interrupted cuts or unstable clamping? The 0° negative rake and the sturdy carbide base provide enhanced edge strength, making the insert a good choice for interrupted cuts and situations where cutting forces may vary. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for identification purposes only and do not imply any affiliation with Metav Werkzeuge. The offered item is an original, factory‑new product of Walter Tools.
LPGT070304R-F55 WKP35S Wendeplatten - Walter Tools
Benefit from high wear resistance, reliable chip control and precise geometry for repeatable milling results; these properties support stable process performance and lower tool-change frequency. Order the insert directly via Metav Werkzeuge or consult the technical advisors if required. LPGT070304R-F55 WKP35S – milling indexable insert, Tiger·tec Silver, F55 chipbreaker (Walter Tools) The LPGT070304R-F55 WKP35S is a rectangular milling indexable insert developed for productive machining of steel and cast iron, combining a coated cemented carbide grade with a dedicated chipbreaker for secure chip formation. Tiger·tec Silver coated carbide grade WKP35S Suitable for steel (P) and cast iron (K) machining F55 chipbreaker for consistent chip control Rectangular insert 07, 0.4 mm corner radius Consistent cutting performance for steel and cast iron The Tiger·tec Silver WKP35S grade is a coated carbide designed to handle the thermal and mechanical demands of machining steel (ISO group P) and cast iron (ISO group K). The coating technology improves wear resistance and helps to maintain a sharp cutting edge under stable, repeatable conditions. Combined with the F55 chipbreaker, the insert produces predictable chip breakage and evacuation, which reduces the risk of built-up edge and maintains consistent cutting forces. This results in improved process reliability and a reduced need for unscheduled interventions on the machine. Geometry that enables accurate setup and repeatability The rectangular form and dimensional specification (size 07, thickness 03) together with a 0.4 mm corner radius and 11° relief angle provide defined cutting geometry for predictable engagement and edge strength. The tolerance class G supports reproducible seating in holders, so indexing and re‑set processes remain accurate across tool changes. These geometric attributes mean the insert is well suited for applications where tool life and surface consistency are priorities, while the moderate corner radius balances strength and the ability to achieve the desired surface finish. Productivity advantages and application guidance Placed in the Tiger·tec Silver family, this indexable insert is tailored for high productivity milling strategies where steady chip control and long edge life are important. The combination of the WKP35S grade and the F55 chipbreaker simplifies process parameter selection: stable chips and consistent wear behaviour permit longer cuts and reduced downtime. For machining trials, start with manufacturer‑recommended feeds and speeds and monitor chip form; adjust coolant and cutting data to match the workpiece batch. For further technical data or to confirm suitability for a specific setup, Metav Werkzeuge’s technical advisors can provide cutting parameters and holder compatibility information. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Silver inserts and to arrange supply or technical consultation Technical data Article number: LPGT070304R-F55-WKP35S-WALTER SKU: LPGT070304R-F55-WKP35S-WALTER Designation: LPGT070304R-F55 WKP35S Product type: Milling indexable insert Brand: Walter Tools Facts Size designation: 07 Thickness: 03 Relief angle: 11° Corner radius: 0.4 mm Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S (coated cemented carbide) Chipbreaker: F55 Form: Rectangular Applicable materials: steel (P), cast iron (K) Version: T FAQ What materials is the LPGT070304R-F55 WKP35S suitable for? The LPGT070304R-F55 WKP35S insert is designed for machining steel (ISO group P) and cast iron (ISO group K), reflecting the intended application range of the WKP35S grade. What benefit does the F55 chipbreaker provide? The F55 chipbreaker on this Walter Tools milling insert promotes controlled chip formation and reliable evacuation, reducing the likelihood of tangled chips and improving surface consistency during productive milling operations. How do the geometry and tolerance class affect performance? The rectangular form, 0.4 mm corner radius and 11° relief angle deliver a balance of edge strength and surface finish capability, while tolerance class G ensures repeatable seating and straightforward indexing in compatible toolholders. Is this insert part of a specific product family and what does that mean for tool life? As a member of the Tiger·tec Silver family, the insert benefits from a coating system engineered to extend wear resistance and support consistent edge retention, contributing to longer effective tool life in standard milling applications. How is the insert designated for ordering and toolholder compatibility? The ISO designation LPGT070304R-F55 WKP35S identifies the geometry, chipbreaker and grade; this information is used to match the insert with suitable Walter Tools holders and clamping systems. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only. There is no affiliation between our company and the manufacturers. The offered item is original factory‑new merchandise from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
LPGT150412R-F55 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, WKP35S wear resistance and the F55 chipbreaker for efficient milling of steel and cast iron; secure reliable productivity and predictable tool life — order the LPGT150412R-F55 WKP35S directly via Metav Werkzeuge or consult our advisers for application support. LPGT150412R-F55 WKP35S milling insert, Tiger·tec Silver coating — for steel and cast iron | Walter Tools A LPGT150412R-F55 WKP35S milling insert engineered for consistent chip control and productive machining of ISO group P (steel) and K (cast iron) components. Tiger·tec Silver coated carbide WKP35S Optimised for steel and cast iron machining 11° clearance angle for stable cutting 1.2 mm corner radius for robust edges Rectangular 15 mm form with F55 chipbreaker Boosted productivity for steel and cast-iron operations The combination of the Tiger·tec Silver coating and the WKP35S grade yields a balanced performance profile tailored to both steel and cast iron (ISO groups P and K). The coating reduces abrasive wear and helps maintain a sharp, reproducible cutting edge under typical machining temperatures, which translates into longer tool life and fewer insert changes. For production environments where component consistency and uptime matter, this insert supports higher process stability and predictable tool consumption. Geometry engineered for reliable chip control and surface quality The insert’s geometry — including an 11° clearance angle and a 1.2 mm corner radius — is designed to absorb cutting loads while preserving edge strength. The F55 chipbreaker actively shapes and evacuates chips, reducing the risk of built-up edge and unstable chips that can damage the workpiece. The rectangular plate form and 15 mm footprint ensure compatibility with common pocket-style toolholders and allow for repeatable clamping and indexing, contributing to consistent surface finish and dimensional accuracy. Coated carbide grade and tolerance for process security This indexable plate is a coated carbide type belonging to the Tiger·tec Silver series and the WKP35S family, offering a compromise between wear resistance and toughness for mixed-material workshops. The tolerance class G and the plate’s production consistency support predictable assembly and run-out behaviour when integrated into modular milling systems. For operations aiming to reduce variability and increase first-pass yield, the insert’s specification facilitates reproducible cutting conditions and helps streamline tool management. Contact Metav Werkzeuge today for tailored advice on integrating Walter Tools Tiger·tec Silver inserts into production and for immediate availability of the LPGT150412R-F55 WKP35S Technical Data Article number: LPGT150412R-F55-WKP35S-WALTER Designation: LPGT150412R-F55 WKP35S Product type: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 1.2 mm Size: 15 Thickness: 04 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F55 Plate form: Rectangular Execution: T Material suitability: Steel (P), Cast iron (K) FAQ What materials is this insert suitable for? The LPGT150412R-F55 WKP35S is designed for ISO groups P (steel) and K (cast iron); the WKP35S grade and Tiger·tec Silver coating balance wear resistance and toughness for these materials. How does the F55 chipbreaker benefit machining? The F55 chipbreaker shapes and evacuates chips, improving chip control and reducing the chance of built-up edge, which helps maintain surface finish and tool life when milling steel and cast iron with the Walter Tools insert. Which geometry features improve edge stability? The combination of an 11° clearance angle and a 1.2 mm corner radius delivers robust cutting edges and reduced edge chipping risk under interrupted or heavy-cut conditions for the plate. Is this insert compatible with standard rectangular toolholders? The rectangular 15 mm form and the standard ISO-style designation of the insert mean it is compatible with many pocket-type toolholders designed for this plate family; always verify seat and clamping dimensions before assembly. What does the WKP35S grade indicate? WKP35S denotes a Walter Tools coated carbide grade within the Tiger·tec Silver technology, optimised for productive machining of steel and cast iron with emphasis on balanced wear resistance and cutting-edge stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods of the manufacturer.
LPGT15T308R-F55 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and predictable chip formation, while the F55 chipbreaker ensures stable machining of steel and cast iron; order directly via Metav Werkzeuge or contact the consultants for tailored application support. LPGT15T308R-F55 WKP35S milling insert — rectangular 15 mm for steel and cast iron, Walter Tools LPGT15T308R-F55 WKP35S is a rectangular milling insert designed for productive machining of steel and cast iron, combining a Tiger·tec Silver coating with a dedicated chipbreaker geometry. Tiger·tec Silver coating for long tool life WKP35S grade optimised for steel and cast iron F55 chipbreaker for stable chip control Rectangular 15 mm insert with 0.8 mm radius Higher productivity through advanced coating and grade selection The combination of the Tiger·tec Silver coating and the WKP35S coated carbide grade delivers measurable gains in productivity and component throughput. The coating reduces adhesive and abrasive wear on the cutting edge, which extends tool life and lowers the cost per component. For production environments where consistent cutting performance is required, this coating-grade pairing supports longer uninterrupted tool cycles and predictable reconditioning intervals, helping to plan machining runs with greater confidence. Reliable chip control and machining stability Equipped with an F55 chipbreaker, the insert promotes controlled chip formation across the ISO groups for steel (P) and cast iron (K). The chipbreaker geometry reduces the risk of long, stringy chips and helps evacuate broken chips from the cut, which improves surface finish and protects the toolholder and spindle from unexpected loads. In short-cycle and serial production, consistent chip management contributes to process stability and repeatable part quality. Geometry tailored for strength and accuracy The insert’s rectangular form and 15 mm nominal size, together with a 0.8 mm corner radius and 11° clearance, balance edge strength and cutting precision. The thicker body (designation T3) increases mechanical support at the cutting edge, reducing the likelihood of edge chipping during interrupted cuts or when encountering harder inclusions in cast materials. These geometric choices result in robust behaviour during roughing passes while still allowing acceptable finishing results where required. Application guidance and process integration This insert is specified for machining steel and cast iron according to ISO group assignments and is best used in applications that require stable stock removal and controlled chip flow. The combination of WKP35S and Tiger·tec Silver is especially suitable for mixed batch production where reliability across different steels and grey or nodular cast irons is essential. For process setup or to verify cutting data against a specific workpiece or machine, Metav Werkzeuge provides application advice and technical data to support tool selection and cutting-parameter optimisation. Contact Metav Werkzeuge for application advice and to secure Walter Tools inserts with Tiger·tec Silver; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks Technical Data Article number: LPGT15T308R-F55-WKP35S-WALTER Designation: LPGT15T308R-F55 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: F55 Plate form: Rectangular Plate size: 15 mm Thickness: T3 Execution: T Tolerance class: G Key measurements Corner radius: 0.8 mm Clearance angle: 11° Plate size: 15 mm Thickness: T3 Tolerance class: G Features and suitability Tiger·tec Silver coating WKP35S coated carbide grade Suitable for steel (ISO P) Suitable for cast iron (ISO K) Rectangular insert geometry Stable chip control with F55 chipbreaker Series: Tiger·tec Silver Execution: T FAQ What materials is this insert suitable for? This milling insert is designed for machining steel (ISO P) and cast iron (ISO K) and is supplied in the WKP35S grade with Tiger·tec Silver coating to handle those groups reliably. How does the F55 chipbreaker improve machining? The F55 chipbreaker promotes controlled chip formation and evacuation, which enhances surface finish and reduces the risk of chip entanglement during machining with the Walter Tools insert. What benefits does the Tiger·tec Silver coating offer? The Tiger·tec Silver coating improves wear resistance and thermal stability, resulting in longer cutting edge life and more consistent performance across batch runs. Is this insert suitable for finishing and roughing operations? The insert’s geometry, including the 0.8 mm corner radius and T3 thickness, provides robustness for roughing while still allowing acceptable finishing under appropriate cutting conditions. Can the insert be used on stainless steel? The data specifies suitability for steel and cast iron; no explicit recommendation for stainless steel is provided for this grade and geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product of the manufacturer.
LPGT15T308R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD-coated grade and the F55 chipbreaker to ensure consistent chip control and extended edge life, improving throughput and reducing downtime; order the insert via Metav Werkzeuge or consult our team for application advice. LPGT15T308R-F55 WSP45G milling indexable insert — Tiger·tec Gold, 11° clearance (Walter Tools) A LPGT15T308R-F55 WSP45G rectangular milling insert designed for versatile milling of steel, stainless steel and heat-resistant alloys, optimised for stable chip control in diverse production settings. Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless and superalloys F55 chipbreaker for consistent chip control Rectangular insert with 11° clearance angle High process security across steels and alloys The Tiger·tec Gold PVD-coated grade WSP45G delivers a balance of wear resistance and toughness that suits intermittent and continuous milling operations. As a PVD-coated carbide variant, the grade provides a hard, heat-resistant surface that reduces flank wear while preserving the underlying carbide's toughness, which in turn supports longer tool life. Designed for groups P, M and S (unalloyed/ alloyed steel, stainless steel and superalloys/titanium), this insert helps maintain cutting stability where temperature and material behaviour vary, contributing to fewer insert changes and improved machine uptime. Reliable chip control and improved surface finish The integrated F55 chipbreaker is tuned to produce predictable chip formation during milling, lowering the risk of built-up edge and recutting. Combined with the corner radius 0.8 mm, the cutting edge achieves a compromise between strength and surface generation: the radius supports edge robustness under higher feed conditions while still enabling acceptable finish quality. The rectangular geometry and 11° clearance angle reduce rubbing on the flank and aid consistent engagement, which benefits both component quality and cycle-time stability. Predictable repeatability for production tooling Manufactured to tolerance class G and supplied in T3 thickness, the insert offers repeatable geometry for indexable tool systems accepting the LPGT form factor. The nominal 15 mm size simplifies tool selection where compact, robust inserts are required. These dimensional and tolerance specifications make the insert suitable for standard cutter bodies that accept LPGT inserts, enabling straightforward replacement and minimal set-up time—an advantage in batch production and mixed-run environments where consistent tool offsets matter. Where this insert makes the difference Choose this insert when milling tasks demand a combination of durability and versatility: small to medium-sized components where material mix includes steel, stainless steel and heat-resistant alloys, and where predictable chip behaviour is essential for unattended cycles. The Walter Tools Tiger·tec Gold series insert provides a pragmatic balance of productivity and edge life, supporting process reliability and steady output. For operations seeking reduced downtime and stable surface quality, this indexable plate is a practical choice. Contact Metav Werkzeuge for an application-specific recommendation on Walter Tools Tiger·tec Gold inserts and to discuss cutter compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LPGT15T308R-F55-WSP45G-WALTER ISO designation: LPGT15T308R-F55 WSP45G Manufacturer: Walter Tools Facts Size: 15 mm Corner radius: 0.8 mm Clearance angle: 11° Thickness class: T3 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F55 Shape: rectangular Material suitability: P / M / S Product type: milling indexable insert FAQ Is this insert suitable for stainless steel milling? Yes. The WSP45G grade in the LPGT15T308R-F55 WSP45G insert is formulated for M group materials and offers secure chip control and thermal resistance for stainless steel applications. What is the purpose of the F55 chipbreaker? The F55 chipbreaker controls chip shape and evacuation during milling, reducing the chance of long, stringy chips and improving surface quality while protecting the cutting edge. Can this insert be used for titanium or nickel-based alloys? The insert is specified for S group materials, meaning it is suitable for machining heat-resistant alloys and titanium where a tough, heat-resistant grade is required. What does the T3 thickness mean for tool stability? The T3 thickness classification indicates the insert's cross-section within standard families; combined with the rectangular form and 0.8 mm corner radius, it offers a stable cutting edge for many milling applications accepting LPGT inserts. Does the insert fit standard LPGT toolholders? The LPGT form factor and ISO designation LPGT15T308R-F55 align with standard toolholders designed for LPGT inserts; ensure that the cutter body accepts the specified size and clearance angle. Walter Tools is a brand of Walter AG. Protected trademarks and product names are the property of their respective owners. The offered article is original and brand-new from the manufacturer. There is no affiliation between our company and the mentioned brands.
LPHW150612R-A51 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of reliable Tiger·tec Silver coating, the WKP35S grade and precise geometry for consistent productivity and tool life; order directly via Metav Werkzeuge or consult the team for application support. LPHW150612R-A51 WKP35S milling indexable insert — Tiger·tec Silver, for steel and cast iron, 11° LPHW150612R-A51 WKP35S is a rectangular milling insert designed for productive machining of steel and cast iron, offering stable chip control and wear resistance in general milling operations. Tiger·tec Silver coating for wear resistance Grade WKP35S optimised for steel and cast iron Chip control with A51 breaker for stable cutting Rectangular format, 15 mm with 11° clearance High process reliability through optimised coating and grade The combination of the Tiger·tec Silver coating with the WKP35S grade delivers enhanced wear resistance and consistent cutting-edge stability. The coated carbide composition reduces flank wear under the thermal and mechanical loads typical for machining steel and cast iron, which in turn supports longer tool life and fewer interruptions during production. This advantage translates directly into more predictable cycle times and reduced tool consumption. Geometry that supports surface quality and stability The insert’s geometry — a corner radius of 1.2 mm and an 11° clearance angle — is configured to improve chip formation and minimise vibration during cut entry. The rectangular 15 mm format combined with a robust thickness provides a rigid mounting interface that helps sustain cutting forces, producing a better surface finish and dimensional stability. The tolerance class H ensures consistent interchangeability across toolholders and reduces setup variability in series production. Practical performance where chip control matters Equipped with the A51 chipbreaker, this grade manages the typical short, breaking chips of cast iron and the continuous chips of many steels more effectively, helping to avoid chip entanglement and tool interference. For machining tasks where chip evacuation and stable cutting are essential, the insert’s chip geometry supports higher material removal rates while maintaining predictable chip flow. The specified materials list (P / K) confirms its suitability for both steel and cast iron workpieces according to ISO classifications. Operational benefits in day-to-day milling Using this insert reduces unscheduled tool changes and supports repeatable process outcomes. The rectangular insert form and clearly defined mounting dimensions allow fast changeovers and straightforward re-indexing, which helps maintain throughput. Combined with established Walter Tools manufacturing standards, the insert contributes to a reliable tooling solution for mixed production environments that handle a range of ferrous materials. For application advice, toolholder matching or to place an order for Walter Tools inserts, contact Metav Werkzeuge — Metav Werkzeuge GmbH is available to assist with technical queries and supply logistics Technical data Article number: LPHW150612R-A51-WKP35S-WALTER Designation: LPHW150612R-A51 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Size: 15 mm Thickness: 6 mm Corner radius: 1.2 mm Clearance angle: 11° Tolerance class: H Special features Chipbreaker: A51 Grade: WKP35S Coating: Tiger·tec Silver (coated carbide) Material suitability: steel (P) and cast iron (K) Shape: rectangular Execution: W FAQ What materials is this insert suitable for? The insert is specified for steel (P) and cast iron (K); the WKP35S grade and Tiger·tec Silver coating are optimised for these ISO material groups. How does the A51 chipbreaker affect machining? The A51 chipbreaker promotes controlled chip breaking for cast iron and stable chip flow in many steels, reducing the risk of chip entanglement and improving process reliability. What are the key dimensional data for machine setup? Relevant setup data: 15 mm insert size, 6 mm thickness, 1.2 mm corner radius, 11° clearance and tolerance class H; refer to these values when selecting the toolholder. Is this an original Walter Tools product? This article is an original, factory-new Walter Tools milling insert in the Tiger·tec Silver series, designated LPHW150612R-A51 WKP35S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LPMT070304R-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for reliable, long-running machining of steel and cast iron; the 11° clearance and 0.4 mm corner radius ensure stable cutting and good surface integrity. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. LPMT070304R-D51 LPMT070304R-D51 WKP25S WKP25S – milling indexable insert for Steel and Cast iron | Walter Tools (Tiger·tec Silver, 11° clearance) The LPMT070304R-D51 WKP25S is a rectangular milling indexable insert in the Tiger·tec Silver series, designed for productive machining of steel (ISO P) and cast iron (ISO K) Tiger·tec Silver coating technology WKP25S: coated carbide grade 11° clearance for stable cutting Rectangular insert with 0.4 mm corner radius Reliable coating and grade for consistent productivity The combination of Tiger·tec Silver and the WKP25S grade provides a balance of wear resistance and edge stability that is particularly effective when machining Steel and Cast iron. As a coated carbide solution, this insert reduces flank wear and helps maintain dimensional accuracy across longer tool life, which translates into fewer tool changes and steadier production runs. The specification is intended to support efficient, repeatable processes where process security and predictable performance are priorities. Geometry engineered for chip control and surface quality The insert’s 11° clearance angle and 0.4 mm corner radius are chosen to deliver a compromise between cutting-edge robustness and ability to achieve fine surface finishes. The D51 chipbreaker promotes controlled chip formation under the thermal and mechanical conditions typical for steel and cast iron, reducing the risk of built-up edge and erratic chips. The Rectangular form factor gives stable seating in suitable cutters and allows for consistent engagement, supporting predictable tool behaviour during transverse and axial movements. Process fit and application advantages Specified for ISO groups P and K, this insert is suited to a wide range of milling tasks on unalloyed and alloyed steels as well as abrasive cast iron grades. With a tolerance class M, the component meets common accuracy expectations for indexable inserts and supports repeatable insert seating and clamping. The combination of grade, coating and geometry reduces downtime and can improve overall productivity by extending the interval between index changes and tool interventions. For machining reliability with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for technical consultation or to secure the LPMT070304R-D51 WKP25S insert — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: LPMT070304R-D51-WKP25S-WALTER Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Facts Clearance angle: 11° Corner radius: 0.4 mm Plate size code: 07 Thickness code: 03 Tolerance class: M Chipbreaker: D51 Special features Coating: Tiger·tec Silver Material: coated carbide Application: Steel (P) and Cast iron (K) Shape: Rectangular Execution: T FAQ Which materials is this insert intended for? The LPMT070304R-D51 WKP25S insert is intended for machining Steel (ISO P) and Cast iron (ISO K), reflecting the design focus of the Tiger·tec Silver grade. What does the designation WKP25S indicate? WKP25S is Walter Tools’ coated carbide grade within the Tiger·tec Silver family, selected for balanced wear resistance and edge stability suitable for steel and cast iron machining. What chip control can be expected from the D51 chipbreaker? The D51 chipbreaker is designed to deliver controlled, shorter chips in the typical cutting regimes encountered with steels and cast irons, improving chip evacuation and process consistency. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius provides improved edge strength compared with smaller radii while still supporting decent surface finish, making it a good compromise for many general milling operations. What does tolerance class M mean for compatibility? Tolerance class M designates common dimensional tolerances that support reliable seating in standard insert housings, ensuring repeatable positioning and predictable tool behaviour for the LPMT070304R-D51 WKP25S Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trade marks and brand names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand-new product from the manufacturer.
LPMT070304R-D51 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the WKP35S cutting grade and the Tiger‑tec Silver coating to achieve productive, wear‑resistant milling in both steel and cast iron; the rectangular geometry and defined relief enable consistent results and easy indexation. Order the insert directly via Metav Werkzeuge or consult our advisers for application support. LPMT070304R-D51 WKP35S – Rectangular milling indexable insert, Tiger‑tec Silver coating (Walter Tools) The LPMT070304R-D51 WKP35S is a rectangular milling insert designed for productive machining of steel and cast iron, combining a coated carbide grade with a dedicated chipbreaker for stable cutting performance Coated Tiger‑tec Silver WKP35S grade Engineered for steel and cast iron machining Rectangular form with 11° relief angle 0.4 mm corner radius for reliable geometry Enhanced productivity through a high‑performance grade The WKP35S grade from the Tiger‑tec Silver series provides a balanced mix of wear resistance and toughness, which is particularly effective when machining P‑group steels and K‑group cast irons according to ISO 513. Because the insert is a coated carbide design, thermal and abrasive wear are reduced, so tool life is extended and change‑over frequency is lowered. The built‑in chip control of the D51 chipbreaker promotes consistent swarf formation, which helps maintain cutting stability and reduces unplanned stoppages in production. Consistent surface quality from defined geometry A controlled relief angle of 11° combined with a 0.4 mm corner radius results in repeatable engagement conditions and predictable surface finish. The rectangular insert form supports accurate seating and simple indexation in compatible cutters, which assists in achieving constant dimensional accuracy across batches. For users less familiar with insert geometry: the relief angle reduces rubbing at the flank, while the corner radius influences the strength of the cutting edge and the apparent finish on the workpiece. Cost‑effective machining and lower process risk The coated hardmetal composition and the WKP35S grade focus on stable chip formation and edge retention. This translates into fewer tool changes, reduced downtime and better utilisation of machine time. When comparing alternatives, this insert typically offers a favourable balance between initial tool cost and total cost per component due to its durability under common cutting conditions for steel and cast iron. The tolerance class M ensures consistent manufacturing quality of the insert itself, aiding predictability in serial production. Practical compatibility and application notes The insert is supplied in the LPMT070304R‑D51 format with a thickness code of 03 and form code 07, and is optimised for cutters accepting a rectangular geometry. The chipbreaker D51 is suited to a wide range of feeds and depths typical for finishing and medium roughing in P/K materials. In practice, selecting appropriate cutting parameters and coolant strategy will further enhance the insert’s performance; machining data should be adapted to the specific alloy and machine capability. For customers requiring further machining data, Metav Werkzeuge can provide tailored recommendations. Discuss machining requirements with Metav Werkzeuge to ensure the Walter Tools LPMT070304R-D51 WKP35S is specified for the intended application; Metav Werkzeuge can advise on cutter compatibility and supply options – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: LPMT070304R-D51-WKP35S-WALTER Designation: LPMT070304R-D51 WKP35S Type: Milling indexable insert Brand: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Form code: 07 Thickness code: 03 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP35S Substrate: coated carbide Chipbreaker: D51 Insert form: Rectangular Material groups: P (steel), K (cast iron) FAQ What materials is this insert suitable for? The LPMT070304R‑D51 WKP35S is intended for steel (ISO group P) and cast iron (ISO group K) machining, leveraging the WKP35S grade and Tiger‑tec Silver coating for stable wear behaviour. How does the Tiger‑tec Silver coating benefit performance? The Tiger‑tec Silver coating on the WKP35S grade reduces abrasive and thermal wear, enabling longer tool life and more consistent cutting performance when milling steels and cast irons. What does the 0.4 mm corner radius affect in machining? A 0.4 mm corner radius strengthens the cutting edge and contributes to improved surface finish and edge stability, particularly useful in finishing and tight‑tolerance operations. Is the chipbreaker D51 suitable for roughing? The D51 chipbreaker is designed for controlled chip formation across a range of depths and feeds; it performs well in finishing and medium roughing tasks in P and K materials when paired with appropriate cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
LPMT150412R-D51 WKP25S Wendeplatten - Walter Tools
Benefit from enhanced machining stability and extended tool life thanks to the Tiger·tec Silver technology and the wear-resistant WKP25S grade; the rectangular form with 11° relief and 1.2 mm corner radius ensures reliable chip formation in steel and cast iron applications—order directly via Metav Werkzeuge or consult our specialists for application support. LPMT150412R-D51 WKP25S rectangular milling indexable insert — 11° relief, 1.2 mm radius (Walter Tools) The LPMT150412R-D51 WKP25S is a rectangular milling indexable insert engineered for productive face and profile milling of steel and cast iron, offering a robust balance of wear resistance and chip control. Tiger·tec Silver coated for longer tool life Optimised chipbreaker D51 for controlled chips Rectangular form with 1.2 mm corner radius Suitable for steel (P) and cast iron (K) Consistent productivity through advanced coating and grade The use of Tiger·tec Silver combined with the WKP25S carbide grade delivers a dependable increase in tool life and thermal resistance. The specialised coating reduces flank wear and supports higher cutting speeds, which translates into fewer indexings and longer productive cycles. For manufacturers seeking to raise line output, the coated grade helps maintain cutting edge integrity under the heat and abrasion typical of machining steels and cast irons, reducing downtime and contributing to predictable process windows. Controlled chip flow and geometry that improves surface result The integrated D51 chipbreaker and the insert’s rectangular insert geometry produce short, manageable chips in both ductile and brittle materials. The 11° relief provides sufficient clearance to avoid rubbing while the 1.2 mm corner radius balances edge strength with the ability to achieve good surface finishes. Controlled chip evacuation lowers the risk of re-cutting and improves reproducibility, which benefits downstream processes that depend on consistent component tolerances and surface quality. Application focus and practical benefits for workshop use Designed according to ISO material groups P and K, the insert is suited to unalloyed and alloyed steel as well as various cast iron grades. The stable cutting edge behaviour and the product’s tolerance class M support repeatable performance in production environments. For users with mixed batches of steel and cast iron, this insert offers a versatile solution that reduces tool inventory complexity while delivering the reliability expected in series production. Discuss application details for the Walter Tools LPMT150412R-D51 WKP25S with Metav Werkzeuge to optimise machining strategies and availability Technical data SKU: LPMT150412R-D51-WKP25S-WALTER Label: Fräswendeschneidplatte LPMT150412R-D51 WKP25S Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Core specifications Relief angle: 11° Corner radius: 1.2 mm Plate size: 15 Plate thickness: 04 Materials & features Grade: WKP25S Chipbreaker: D51 Form: Rechteck (rectangular) Applicable material groups: P (steel), K (cast iron) Tolerance class: M Execution: T Material designation: P / K ISO designation: LPMT150412R-D51 WKP25S FAQ What materials is this insert suitable for? The LPMT150412R-D51 WKP25S is suitable for machining steel (ISO group P) and cast iron (ISO group K), combining the WKP25S grade and Tiger·tec Silver coating for reliable performance. How does the D51 chipbreaker affect machining? The D51 chipbreaker promotes short, controlled chips and improves chip evacuation, which helps the insert maintain consistent cutting conditions and enhances surface finish. What advantage does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping while still allowing good surface quality in face and profile milling operations. Is this insert suitable for high-speed milling? The Tiger·tec Silver coating and the WKP25S grade are designed to tolerate elevated cutting temperatures, supporting higher cutting speeds where the application and machine capabilities permit. Which series and brand manufacture this insert? The insert belongs to the Tiger·tec Silver series from Walter Tools and is specified under the designation LPMT150412R-D51 WKP25S. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LPMT150412R-D51 WKP35S Wendeplatten - Walter Tools
LPMT150412R-D51 WKP35S combines Tiger·tec Silver coating with a robust 1.2 mm corner radius to deliver stable chip formation and extended tool life when machining steel and cast iron. Benefit from a coated carbide grade optimised for process reliability and consistent surface finish. Order directly via Metav Werkzeuge or consult their specialists for tailored cutting data and application support. LPMT150412R-D51 WKP35S milling insert by Walter Tools — Tiger·tec Silver, suitable for steel and cast iron LPMT150412R-D51 WKP35S is a rectangular milling insert designed for productive machining of steel and cast iron, offering high process stability and reliable chip control in a range of milling operations. Tiger·tec Silver coated carbide WKP35S Rectangular insert with 1.2 mm corner radius Designed for steel and cast iron machining 11° free angle for robust cutting geometry High-performance grade for steel and cast iron machining The WKP35S grade, featuring Tiger·tec Silver coating, is formulated for demanding milling tasks on steel and cast iron (ISO groups P and K). The coated carbide composition provides improved resistance to abrasive and adhesive wear, which translates into longer tool life and fewer tool changes. For production environments, this means higher uptime and a more predictable machining process, as the insert maintains a stable cutting edge under typical temperatures and chip-forming behaviour encountered when milling steels and cast materials. Edge strength and consistent surface quality A 1.2 mm corner radius combined with an 11° free angle gives this rectangular insert a balance between edge robustness and acceptable cutting forces. The larger corner radius increases the effective tool edge strength, reducing chipping in interrupted cuts and enhancing finish consistency. The D51 chipbreaker geometry supports controlled chip fragmentation, reducing the risk of built-up edge and improving surface integrity on workpieces. These geometrical choices help achieve repeatable results in both roughing and semi-finishing passes. Practical advantages in process reliability and productivity The insert’s geometry and coated carbide technology are aimed at reducing machining interruptions and improving cycle-time stability. In cluster production or batch machining, the predictable wear behaviour of this grade contributes to lower variance in part quality, minimising rework. For customers seeking application support, Metav Werkzeuge provides cutting data and optimisation advice to match feed, speed and depth of cut to material and machine capability, supporting faster process ramp-up and cost-effective tool utilisation. For application advice or to order Walter Tools inserts such as the WKP35S grade, contact Metav Werkzeuge for personalised support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: LPMT150412R-D51-WKP35S-WALTER Label: Fräswendeschneidplatte LPMT150412R-D51 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Grade: WKP35S Core specifications Free angle: 11° Corner radius: 1.2 mm Size code: 15 Thickness code: 04 Plate form: Rectangular Chipbreaker: D51 Materials & special features Coating/technology: Tiger·tec Silver; coated carbide Material designation: P / K (Steel / Cast iron) Suitable for: Steel (P); Cast iron (K) Tolerance class: M Execution/code: T Series note: Stable chip formation, broad material coverage FAQ What materials is this insert suitable for? The LPMT150412R-D51 WKP35S insert is designed for machining steel (P) and cast iron (K) in accordance with its WKP35S grade and Tiger·tec Silver coating. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius on the insert increases edge strength and reduces the likelihood of chipping during interrupted cuts, supporting more consistent surface finishes with the Walter Tools insert. What does the D51 chipbreaker provide? The D51 chipbreaker geometry ensures controlled chip formation and fragmentation, which aids evacuation and reduces the chance of built-up edge when milling steel and cast iron. Is this insert available for high-speed milling? The coated carbide grade and geometry of this insert are intended for productive milling; cutting parameters should be adapted to machine capability and material—Metav Werkzeuge can provide recommended speeds and feeds for specific applications. Which series and coating does this insert use? The insert belongs to the Tiger·tec Silver series and uses a coated carbide grade WKP35S for enhanced wear resistance and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the respective manufacturer.
LPMT150412R-D51 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold PVD-coated grade and the WSP45G geometry delivers consistent edge life and stable chip formation across demanding materials; benefit from reproducible results and reduced downtime. Order or request application advice directly via Metav Werkzeuge for rapid availability and expert support. LPMT150412R-D51 WSP45G rectangular milling insert by Walter Tools — Tiger·tec Gold grade for steel, stainless and high-temperature alloys The LPMT150412R-D51 WSP45G is a rectangular indexable milling insert engineered for productive face and shoulder milling in steel, stainless steel and heat-resistant alloys. LPMT150412R-D51 WSP45G insert by Walter Tools Tiger·tec Gold PVD coating for extended edge life Suitable for steel, stainless and high-temperature alloys 11° relief, 1.2 mm corner radius, D51 chipbreaker Increased process reliability through advanced coating technology The combination of the Tiger·tec Gold coating and the WSP45G grade provides a PVD-coated carbide that resists abrasive wear and sustains cutting-edge integrity under elevated temperatures. This engineered coating reduces flank wear and supports stable chip formation, which directly improves tool life and part-to-part consistency. For production environments where long tool life and predictable regrind intervals matter, the enhanced thermal and mechanical resistance of this grade translates into fewer tool changes and a steadier machining cycle. Geometry tuned for repeatable surface quality and dimensional control The insert’s rectangular shape with a 1.2 mm corner radius and an 11° relief angle produces a favourable contact zone and predictable cutting forces. The integrated D51 chipbreaker is designed to form consistent chips across mixed cutting conditions, limiting built-up edge and improving surface finish. These geometric details—implemented within tolerance class M—help to secure reproducible results on each operation and simplify process planning for series production or high-mix small-batch jobs. Broad material capability with clear application benefits Designed for the demands of ISO groups P, M and S, the grade performs across unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. The result is a single indexable part that reduces inventory complexity while still allowing targeted performance: reliable edge life on steels, improved wear resistance on stainless substrates and heat tolerance for high-temperature alloys. The insert’s specification supports both finishing passes and robust semi-finishing operations, enabling efficient cycle-time planning without sacrificing surface quality. Request application advice or a tailored quotation from Metav Werkzeuge for the Walter Tools LPMT150412R-D51 WSP45G — expert guidance and fast delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LPMT150412R-D51-WSP45G-WALTER Label: Fräswendeschneidplatte LPMT150412R-D51 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Core specifications Size: 15 mm Corner radius: 1.2 mm Relief angle: 11° Thickness code: 04 Chipbreaker: D51 Tolerance class: M Special features PVD-coated carbide (Tiger·tec Gold) Material suitability: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Rectangular insert form Wendeplatten (indexable inserts) application Ausführung: T FAQ What materials is this insert suitable for? The Walter Tools LPMT150412R-D51 WSP45G is specified for steel (P), stainless steel (M) and heat-resistant superalloys or titanium (S), offering versatile performance across these material groups. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating on the WSP45G grade reduces abrasive wear and improves thermal stability, which enhances edge life and contributes to consistent machining results. What does the D51 chipbreaker provide in practice? The D51 chipbreaker promotes controlled chip formation and reduces the risk of built-up edge, supporting better surface quality and more reliable process windows in both finishing and semi-finishing operations. Is the insert suitable for automated machining centres? Yes, the rectangular indexable geometry and stable grade characteristics make this insert appropriate for automated and high-productivity milling processes where reproducibility and tool life are key. How to identify the correct replacement insert? Refer to the SKU LPMT150412R-D51-WSP45G-WALTER or the ISO designation LPMT150412R-D51 WSP45G to match geometry, chipbreaker and grade when ordering replacements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the respective manufacturer.
LPMT150612R-D51 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver performance and the WKP35S cutting grade for dependable machining of steel and cast iron; the combination of stable chip control and a 1.2 mm corner radius supports consistent surface quality and long tool life. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. LPMT150612R-D51 WKP35S rectangular milling insert — 11° clearance, 1.2 mm corner radius, Walter Tools LPMT150612R-D51 WKP35S is a rectangular milling insert designed for efficient machining of steel and cast iron in general milling operations Tiger·tec Silver coating for extended edge life WKP35S grade optimised for steel and cast iron Rectangular form with 11° clearance for stability D51 chipbreaker for consistent chip control Consistent edge life through Tiger·tec Silver technology The insert is manufactured in the Tiger·tec Silver series and uses the WKP35S cutting grade, a coated carbide designed specifically for machining steel and cast iron. This coating reduces abrasive and thermal wear, so the tool retains cutting capability for longer intervals, which in turn reduces tool change frequency and production interruptions. The result is predictable tool behaviour under the thermal and mechanical loads typical of cutting alloyed and unalloyed steels, supporting higher productive output with fewer unexpected stoppages. Stable cutting geometry for improved surface finish A defining advantage of this rectangular geometry is the combination of an 11° clearance angle and a 1.2 mm corner radius, which together deliver mechanical stability and improved load distribution at the cutting edge. The integrated D51 chipbreaker promotes short, controllable chips when machining a range of steels and cast irons, reducing the risk of built-up edge and improving surface quality. These geometric features make the insert suitable for operations where surface integrity and dimensional consistency are important, such as semi-finishing passes and general milling tasks. Ready for series production with industrial tolerances Produced to tolerance class M, this grade provides consistent dimensions and repeatable performance in batch production. The plate size (15) and thickness specification enable secure clamping and repeatable seating in standard toolholders. The combination of a robust grade and the Tiger·tec Silver coating reduces total tooling costs in medium- to high-volume workflows by extending effective tool life and lowering scrap risk. Where predictable machining and minimal rework are priorities, the insert delivers measurable efficiency gains. Application guidance and process fit This insert is optimised for ISO material groups P (steel) and K (cast iron), reflecting its intended use for the typical heat and chip-formation characteristics of these classes. Depending on component geometry and required material removal rates, the insert can be applied in roughing and semi-finishing operations; cutting parameters should be selected according to machine power and workpiece specifications. For tailored recommendations on feeds, speeds and holder selection, Metav Werkzeuge can provide process support and advice to ensure the highest productivity with the Walter Tools grade. Discuss LPMT150612R-D51 WKP35S and Tiger·tec Silver options with Metav Werkzeuge for application-specific recommendations and immediate availability Technical data Article number: LPMT150612R-D51-WKP35S-WALTER Label: Fräswendeschneidplatte LPMT150612R-D51 WKP35S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Core specifications Plate size: 15 mm Thickness: 06 Corner radius: 1.2 mm Clearance angle: 11° Tolerance class: M Special features Chipbreaker: D51 Shape: Rectangular Material compatibility: P (steel), K (cast iron) Execution: T SKU: LPMT150612R-D51-WKP35S-WALTER FAQ Is this insert suitable for machining stainless steel? Stainless steel is not listed among the specified material groups for the LPMT150612R-D51 WKP35S; the grade is optimised for ISO group P (steel) and K (cast iron) applications. What does the WKP35S designation indicate? WKP35S denotes a coated carbide cutting grade in the Tiger·tec Silver family that is engineered for a balance of wear resistance and toughness when machining steel and cast iron. How does the D51 chipbreaker affect machining? The D51 chipbreaker promotes short, controllable chips and improves chip evacuation when machining steels and cast irons, helping to reduce built-up edge and stabilise surface finish. What are the critical geometry values to consider for tool setup? Key values are a 1.2 mm corner radius and an 11° clearance angle; these influence load distribution, edge strength and contact geometry in the cutter arrangement. Is the insert intended for roughing or finishing operations? The LPMT150612R-D51 WKP35S is suitable for general milling tasks including semi-finishing and productive roughing, with process parameters adjusted to the workpiece and machine capability. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are used for explanation only. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LPMT150612R-D51 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of a robust Tiger‑tec Gold coating, the versatile WSP45G grade and the stabilising D51 chipbreaker for predictable performance and long tool life; order directly via Metav Werkzeuge or consult the Metav team for tailored application advice. LPMT150612R-D51 WSP45G milling insert – rectangular indexable insert with Tiger‑tec Gold coating for P/M/S applications LPMT150612R-D51 WSP45G is a rectangular milling indexable insert designed for reliable chip control and versatile machining of steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD coating Versatile for steel, stainless and superalloys Corner radius 1.2 mm for edge strength Rectangular form, 15 mm size Predictable chip control and process stability The insert’s D51 chipbreaker is engineered to maintain consistent chip segmentation across a range of cutting conditions, which reduces downtime caused by chip interference and eases chip evacuation. Combined with the Tiger‑tec Gold PVD coating, the grade ensures improved resistance to abrasive wear and thermal loads typical when machining steel and stainless steel. This results in a more stable cutting edge and a reduced likelihood of unexpected tool changes, supporting uninterrupted production cycles. Durable cutting edge and extended tool life A corner radius of 1.2 mm and a clearance angle of 11° provide a robust cutting geometry that balances strength and surface finish. The coated carbide substrate of the WSP45G grade is optimised for the mechanical and thermal stresses encountered when machining tougher alloys, contributing to longer tool life and fewer indexable element replacements. The tolerance class M ensures repeatable seat fit and reliable clamping, helping to maintain dimensional accuracy over multiple insert changes. Versatility across demanding materials Designed for the ISO groups P / M / S, this insert covers a broad material spectrum: common and alloyed steels, stainless steel, and heat‑resistant superalloys or titanium. The WSP45G composition supports secure chip formation where high temperatures and material toughness would otherwise compromise performance. For mixed production where multiple material types are encountered, the insert reduces the need for frequent grade changes and simplifies tooling inventories. Practical handling and integration into machining cells The LPMT format and 15 mm nominal size make the insert suitable for a variety of rectangular milling cutters and toolholders. The plate thickness designation 06 and the standardised ISO identification support straightforward replacement and inventory management. Users benefit from easier setup and predictable seating behaviour, which in turn promotes quicker turnarounds between jobs and consistent component quality. For complex applications, Metav Werkzeuge offers application consultation to match cutting parameters with the WSP45G performance profile. Rely on Walter Tools’ Tiger‑tec Gold performance — contact Metav Werkzeuge for cutting data, availability and recommendations tailored to specific production needs. Technical data Article number: LPMT150612R-D51-WSP45G-WALTER Type designation: LPMT150612R-D51 WSP45G Brand: Walter Tools Facts Size: 15 Thickness: 06 Corner radius: 1.2 mm Clearance angle: 11° Tolerance class: M Special features Grade: WSP45G Coating system: Tiger‑tec Gold (PVD) Material suitability: P / M / S Chipbreaker: D51 Plate shape: Rectangular Series: Tiger‑tec Gold FAQ What materials can be machined with this insert? The LPMT150612R‑D51 WSP45G is suitable for machining steel (P), stainless steel (M) and heat‑resistant alloys/titanium (S) as indicated by its P / M / S designation and the WSP45G grade. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold PVD coating enhances thermal and abrasive wear resistance, which helps to maintain cutting edge integrity under elevated temperatures and improves overall tool life for demanding milling operations. What is the effect of the 1.2 mm corner radius? A 1.2 mm corner radius increases edge robustness, reducing chipping risk and supporting a stable surface finish, particularly in interrupted cuts or when machining tougher materials. Is this insert compatible with standard LPMT toolholders? The ISO designation LPMT150612R‑D51 aligns with standard rectangular insert seating and clamping; the tolerance class M supports repeatable fitting and reliable clamping in compatible toolholders. When should the D51 chipbreaker be chosen over other chipbreakers? Choose the D51 chipbreaker when consistent chip segmentation and reliable evacuation are priorities across mixed materials, especially where thermal load and material ductility can lead to poor chip control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (trading as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
LPMT150612R-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a 1.2 mm corner radius for stable chip control and extended tool life; ideal for demanding machining of Stahl and Gusseisen. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. LPMT150612R-D57 WKP25S — Rectangular milling insert, Tiger·tec Silver, for Stahl and Gusseisen | Walter Tools The LPMT150612R-D57 WKP25S is a coated carbide rectangular milling insert designed for robust finishing and semi-finishing operations on Stahl and Gusseisen, combining wear resistance with secure cutting-edge stability. Tiger·tec Silver coating technology Coated carbide for stable performance Rectangular geometry, 1.2 mm corner radius Suitable for Stahl and Gusseisen machining Consistent productivity through reliable coating and grade The Tiger·tec Silver grade delivers a coated carbide substrate tailored to sustained cutting under typical steel and cast-iron conditions. By combining a modern coating stack with a grade focused on wear resistance, the insert reduces flank wear and maintains a stable cutting edge over longer cycles. This results in predictable tool-life windows and fewer tool changes, which supports higher machine uptime and a more efficient production flow. The WKP25S grade is particularly effective where a balance between abrasion resistance and toughness is required. Geometry designed for secure chip control and surface quality A rectangular plate form with a 1.2 mm corner radius and an 11° free angle offers a controlled engagement with the workpiece, favouring improved surface finish and dimensional stability during finishing passes. The dedicated D57 chipbreaker geometry assists in consistent chip formation when machining both short and intermittently breaking chips typical of Gusseisen, while also handling continuous chips encountered in Stahl. For process planners this means fewer interruptions, predictable thermal load at the cutting edge and a reduced risk of poor surface integrity. Practical application and process support for workshop integration The insert’s specification makes it suitable for a broad range of general-purpose milling fixtures and toolholders that accept the LPMT form. With a tolerance class of M and the compact plate size, the component integrates easily into standard tool assemblies and indexable tool systems. If specific cutting parameters are required for a component, Metav Werkzeuge’s technical consultants can provide recommended feeds and speeds based on the workpiece material and machine capability. For complex or critical components, targeted advice helps to secure the expected cycle time and component quality. For tailored technical advice or to secure availability of the LPMT150612R-D57 WKP25S from Walter Tools, contact Metav Werkzeuge for precise selection and ordering support Technical data Article number: LPMT150612R-D57-WKP25S-WALTER Name: LPMT150612R-D57 WKP25S Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core specifications Series: Tiger-tec Silver Grade: WKP25S Free angle: 11° Corner radius: 1.2 mm Plate size: 15 Plate thickness: 06 Tolerance class: M Design and features Geometry: Rectangular Chipbreaker: D57 Substrate / material designation: P / K Execution: T Suitability: Stahl, Gusseisen FAQ What materials is this insert suitable for? The LPMT150612R-D57 WKP25S is optimised for machining Stahl and Gusseisen, reflecting the P/K designation of the grade. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on this indexable plate improves wear resistance and heat management, enabling longer tool life and more consistent performance in demanding milling operations. Is the insert compatible with standard LPMT toolholders? Yes, the LPMT form factor and tolerance class M make the insert compatible with common toolholder systems designed for rectangular plates of this designation. Which chipbreaker should be selected for mixed operations? The D57 chipbreaker integrated in this plate is intended for reliable chip control across finishing and semi-finishing tasks on both Stahl and Gusseisen. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
LPMT150612R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for consistent tool life and reliable chip control; the rectangular 15 mm format with 11° clearance and a 1.2 mm corner radius delivers stable cutting and improved surface quality in steel and cast iron applications. Order the insert via Metav Werkzeuge or consult our team for process recommendations. LPMT150612R-D57 WKP35S – Fräswendeschneidplatte (indexable milling insert) by Walter Tools, for steel and cast iron The LPMT150612R-D57 WKP35S is an indexable milling insert engineered for productive machining of steel and cast iron, combining a coated-carbide substrate with Tiger·tec Silver technology for extended durability. Tiger·tec Silver coating for long tool life Optimised for steel and cast iron machining 11° clearance and 1.2 mm corner radius Rectangular 15 mm insert, D57 chipbreaker Consistent cutting performance through advanced coating technology The combination of Tiger·tec Silver and the WKP35S grade provides a coated-carbide cutting edge designed to resist abrasive wear and maintain a stable cutting edge under typical steel and cast iron machining conditions. This results in reduced flank wear and longer intervals between index changes, which supports higher overall productivity. The coated surface also improves heat resistance during interrupted cuts, helping to preserve cutting geometry and deliver repeatable component quality. Geometry that stabilises cut and enhances surface finish A moderate 11° clearance angle paired with a 1.2 mm corner radius creates a balance between edge strength and fine surface generation. The rectangular form and D57 chipbreaker are intended to control chip formation in medium to heavy milling passes, reducing the risk of re-cutting and improving workpiece finish. These geometric choices mean fewer passes to reach final dimensions and less machine time per part, supporting efficient cycle planning in production environments. Economic benefits for shop-floor productivity The coated-carbide composition and grade selection aim to lower tooling costs per workpiece by extending service life and reducing unplanned downtime. The insert’s tolerance class M ensures consistent fitment and repeatability across tool holders, simplifying inventory handling and replacement logistics. By standardising on robust, long-wearing inserts, workshops can expect improved uptime and a clearer cost-benefit profile for high-volume milling tasks. Practical integration and material guidance This indexable insert is specified for machining according to ISO material groups P (steel) and K (cast iron), making it suitable for a wide range of ferrous applications. As a coated carbide insert, it works well in both finishing and semi-finishing operations where reliable chip control and edge stability are required. For optimal performance, match the insert grade and chipbreaker to the chosen cutting parameters and workholding arrangement; tool selection should consider cutter type, spindle speeds and feed per tooth to exploit the strengths of the Tiger·tec Silver technology. For application-specific advice and fast supply of Walter Tools inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — technical consultation and order assistance are available. Technical data Article number: LPMT150612R-D57-WKP35S-WALTER Designation: LPMT150612R-D57 WKP35S Type: Indexable milling insert Series: Tiger·tec Silver Grade: WKP35S Numeric data Clearance angle: 11° Corner radius: 1.2 mm Insert size: 15 mm Thickness code: 06 Tolerance class: M Materials & special features Coating: Tiger·tec Silver Material: coated carbide Chipbreaker: D57 Applicable materials: steel (P), cast iron (K) Shape: rectangular Series description: WKP35S optimised for steel and cast iron FAQ What materials is this insert suitable for? The LPMT150612R-D57 WKP35S insert is designed for steel (ISO group P) and cast iron (ISO group K), utilising the WKP35S grade for balanced wear resistance and chip control. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the WKP35S grade enhances thermal and abrasive resistance of the coated carbide, leading to longer edge life and more consistent part quality under typical milling conditions. What does the D57 chipbreaker do? The D57 chipbreaker geometry controls chip formation during milling passes, reducing re-cutting and improving evacuation for a more robust process, especially in mixed finishing and semi-finishing applications. Is the insert compatible with standard toolholders? The insert is manufactured to tolerance class M, ensuring consistent seating in compatible rectangular-indexable milling cutters; confirm holder compatibility with the LPMT150612R-D57 designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LPMT15T308R-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, the Tiger·tec Silver coating and the robust WKP25S grade for efficient milling of steel and cast iron; order via Metav Werkzeuge or request individual application advice from our consultants. LPMT15T308R-D51 WKP25S — Indexable milling insert for steel & cast iron, Walter Tools The LPMT15T308R-D51 WKP25S is a rectangular indexable insert developed for medium to heavy milling tasks in steel and cast iron, offering a balanced mix of wear resistance and consistent chip control for industrial production environments. Tiger·tec Silver coating for long tool life Suitable for steel and cast iron machining 11° relief angle for stable cutting 0.8 mm corner radius for precise profiles Maximise uptime with advanced coating and grade The combination of Tiger·tec Silver coating and the WKP25S grade delivers a coated carbide solution tailored for continuous industrial use. The coating improves wear resistance and heat management, which reduces flank wear under typical cutting temperatures; this translates into longer effective tool life and fewer index changes on the machining centre. For owners of modern milling cells, the result is a measurable increase in production uptime and a lower cost per component due to fewer tool interventions. Stable geometry for predictable surface quality A relief angle of 11° and a corner radius of 0.8 mm provide a geometry that supports stable cutting forces and repeatable surface finishes. The rectangular form with a 15 mm edge length and a T3 thickness creates a rigid cutting seat that keeps the insert seated firmly under loads typical for slotting and face milling operations. Such geometry minimises vibration and helps to maintain a consistent profile when machining interrupted or continuous cuts, benefiting shops that require reliable dimensional stability. Broad material range and reliable chip control Designed for the ISO P and K groups, this insert is suitable for steel and cast iron applications, where thermal and abrasive wear mechanisms differ. The integrated D51 chipbreaker is optimised to produce short, controllable chips in both continuous and semi-continuous cutting conditions, reducing the risk of chip entanglement and improving surface integrity. When combined with appropriate cutting parameters, the insert supports efficient metal removal rates while maintaining tool life and process security. Practical benefits for production workflows Using a standardised insert such as this one simplifies tooling logistics: fewer variant tools to manage, easier stock control and predictable regrinding or disposal schedules. The insert’s specification supports straightforward programming of CAM cycles, since its geometry and grade are documented and repeatable. For contractual manufacturing or series production, these attributes contribute to stable process windows and consistent part quality across shifts. Choose the Walter Tools Tiger·tec Silver LPMT15T308R-D51 WKP25S for robust, reproducible milling results and contact Metav Werkzeuge for tailored application advice or availability information at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LPMT15T308R-D51-WKP25S-WALTER Part designation: LPMT15T308R-D51 WKP25S Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Silver Tolerance class: M Core data Insert size: 15 mm Relief angle: 11° Corner radius: 0.8 mm Thickness: T3 Special features Grade: WKP25S (Tiger·tec Silver) Coated carbide Rectangular form Chipbreaker: D51 Suitable for steel (P) and cast iron (K) FAQ Which materials is this insert suitable for? The LPMT15T308R-D51 WKP25S from Walter Tools is designed for machining steel (ISO group P) and cast iron (ISO group K), with the grade tuned to handle the thermal and abrasive demands of both groups. What does the Tiger·tec Silver designation mean for performance? Tiger·tec Silver denotes a coating technology and grade combination that enhances wear resistance and heat handling; in the case of this insert, it contributes to longer tool life and consistent cutting behaviour under industrial milling conditions. How does the D51 chipbreaker affect machining? The D51 chipbreaker is configured to produce short, manageable chips in a variety of cutting scenarios, improving chip evacuation and reducing the likelihood of chip-related surface defects when milling with this insert. Is the insert suitable for heavy-duty milling operations? With a robust rectangular form, T3 thickness and a relief angle of 11°, the insert is suitable for medium to heavy milling tasks where stability and rigidity are required to maintain process reliability. Can the insert geometry be used in common CAM tool libraries? Yes, the defined geometry—15 mm edge length, 0.8 mm corner radius and standard relief—allows straightforward integration into CAM libraries for predictable toolpaths and consistent part programming. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory‑new goods of the manufacturer.
LPMT15T308R-D51 WKP35S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WKP35S grade, this rectangular insert (0.8 mm corner radius, 11° relief) provides stable chip formation and extended edge life for steel and cast‑iron milling; order via Metav Werkzeuge or consult the specialists for application advice. LPMT15T308R-D51 WKP35S milling insert (rectangular, 0.8 mm radius) – Walter Tools The LPMT15T308R-D51 WKP35S is a rectangular milling insert from the Tiger·tec Silver range, optimised for productive machining of steel and cast iron. Tiger·tec Silver coating technology Suitable for steel and cast iron Rectangular form, 0.8 mm corner radius 11° relief angle, tolerance class M High‑productivity coating and grade for reliable machining The combination of the Tiger·tec Silver coating and the WKP35S grade delivers a balanced performance for the machining of steel and cast iron (ISO groups P and K). The coated carbide construction reduces abrasive wear and improves thermal resistance, resulting in stable chip formation under typical cutting loads. For production environments that demand repeatable component quality, this coated grade supports longer tool life and consistent cutting behaviour, reducing unplanned interruptions and aiding process stability. Geometry and edge design that support surface quality and tool life The rectangular geometry, 0.8 mm corner radius and 11° relief angle are designed to combine edge strength with predictable cutting forces. The chipbreaker D51 controls chip form and evacuation, which helps to prevent built‑up edge and enhances surface finish on the workpiece. A plate thickness of T3 and tolerance class M ensure secure clamping and interchangeability in standard milling cutter bodies, while the compact corner radius improves resistance to impact and edge chipping during interrupted cuts. Process benefits and integration into production tooling With a focus on productivity, this indexable insert supports shorter cycle times and reduced tooling costs through extended life and reliable performance. The grade’s suitability for both steel and cast iron simplifies tool inventory and setup decisions in mixed‑material operations. The SKU LPMT15T308R-D51 WKP35S from Walter Tools offers predictable wear behaviour and repeatable results when used with compatible cutter bodies, contributing to stable machining parameters and easier process control on the shop floor. For tailored application advice and to secure Walter Tools Tiger·tec Silver inserts for high‑productivity milling, contact Metav Werkzeuge to discuss suitability and availability Technical Data Article number: LPMT15T308R-D51-WKP35S-WALTER Name: LPMT15T308R-D51 WKP35S Product type: milling insert Brand: Walter Tools Core data Size: 15 mm Corner radius: 0.8 mm Relief angle: 11° Thickness: T3 Tolerance class: M Chipbreaker: D51 Special features Coating: Tiger·tec Silver Grade: WKP35S Material compatibility: steel (P), cast iron (K) Form: rectangular Series: Tiger·tec Silver Substrate: coated carbide FAQ Which materials is this insert intended for? The LPMT15T308R-D51 WKP35S is intended for machining steel and cast iron (ISO groups P and K), reflecting the design focus of the Tiger·tec Silver grade. What distinguishes the WKP35S grade? WKP35S is a Walter Tools grade in the Tiger·tec Silver family; it is a coated carbide formulation optimised for wear resistance and stable chip control in steel and cast‑iron applications. How does the chipbreaker D51 affect machining? The chipbreaker D51 shapes and breaks chips to improve evacuation and reduce the risk of long, stringy chips that can foul the cutter; this supports surface quality and reduces downtime for chip clearing. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and resistance to chipping compared with very small radii, while still allowing good surface finish, especially in shoulder and face milling operations. How does tolerance class M influence tool changes? Tolerance class M offers consistent dimensional accuracy for the insert, enabling reliable interchangeability in standard cutter bodies and predictable clamping behaviour during tool changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
LPMT15T308R-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the coated‑carbide WSP45G grade and the stabilising D51 chipbreaker to achieve consistent chip control and extended tool life in milling applications; order directly via Metav Werkzeuge or consult our specialists for process optimisation. LPMT15T308R-D51 WSP45G — Milling insert LPMT15T308R-D51 WSP45G (WSP45G) for versatile milling by Walter Tools The LPMT15T308R-D51 WSP45G is a rectangular milling insert engineered for productive machining of steel, stainless steel and heat‑resistant alloys in general milling operations. Tiger‑tec Gold coated carbide WSP45G Suitable for steel, stainless steel and superalloys 11° clearance angle for secure chip control Rectangular 15 mm insert with 0.8 mm corner radius Consistent cutting performance for industrial milling The Tiger‑tec Gold WSP45G grade is a coated carbide solution developed for milling where stable cutting edges and reliable chip formation are decisive. Its PVD coating increases wear resistance and supports thermal stability when machining materials classified as P / M / S (steel, stainless steel and superalloys/titanium). This results in more predictable tool life and fewer unscheduled tool changes, which improves uptime and lowers per‑part machining costs. The description of the grade indicates a focus on toughness and versatility, so the insert performs well across varying cutting conditions encountered in production environments. Geometry and chip control designed to reduce rework The insert’s D51 chipbreaker and a clearance angle of 11° work together to control chips and limit adhesion at the cutting edge. The rectangular form and the 0.8 mm corner radius deliver a balance between edge strength and surface finish: the radius reduces the risk of chipping on interrupted cuts, while the geometry supports a stable contact zone for predictable tool behaviour. These features translate into fewer surface defects and less time spent on secondary operations. In short, the geometry is optimised for steady metal removal rates and improved process reliability. Versatility, mounting and application guidance for production planners With a nominal size of 15 mm and a plate designation of T3, this insert fits a wide range of milling toolholders designed for rectangular indexable inserts. The tolerance class M ensures repeatable seating and reliable indexing in a production setting. The coated carbide technology of Tiger‑tec Gold means the insert tolerates the typical thermal and mechanical stresses of milling steels as well as the tougher conditions of stainless and heat‑resistant materials. For mixed‑material production batches, selecting this grade helps reduce the need for frequent insert changes, supporting leaner tool management and improved process security. For reliable Tiger‑tec Gold performance in demanding milling tasks, request technical advice or procure the Walter Tools LPMT15T308R‑D51 WSP45G directly through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical data Article number: LPMT15T308R-D51-WSP45G-WALTER Manufacturer: Walter Tools Product type: Milling insert (rectangular) Facts Plate size: 15 mm Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: T3 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G (coated carbide, PVD) Chipbreaker: D51 Form: Rectangular Material suitability: P / M / S (steel, stainless steel, superalloys/titanium) Designation without grade: LPMT15T308R-D51 FAQ What materials is this insert suitable for? The LPMT15T308R‑D51 WSP45G from Walter Tools is specified for materials in groups P, M and S — that is, unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. What is the advantage of the Tiger‑tec Gold WSP45G grade? The Tiger‑tec Gold WSP45G grade provides a tough, wear‑resistant PVD coated carbide layer that improves edge stability and extends tool life under the thermal loads typical of milling. How does the D51 chipbreaker affect machining? The D51 chipbreaker is shaped to produce short, controllable chips and to reduce built‑up edge formation, which leads to steadier cutting forces and better surface quality when using this insert. What does the 0.8 mm corner radius mean for component finish? A 0.8 mm corner radius increases edge strength and reduces the risk of chipping on interrupted cuts while providing a finish suitable for many general milling tasks without the need for additional finishing passes. Is the insert compatible with common rectangular toolholders? The designation LPMT15T308R‑D51 and the T3 thickness indicate standard rectangular geometry; the insert is intended for toolholders that accept 15 mm rectangular indexable plates with the specified seating dimensions. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and registered trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the brands cited. The offered article is original, factory‑new merchandise from the manufacturer Walter Tools.
LPMW150412TR-A27 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP25S carbide grade and a compact rectangular geometry to secure stable chip control and predictable tool life in steel and cast‑iron milling. Order the insert through Metav Werkzeuge or consult their specialists for application support. LPMW150412TR-A27 WKP25S milling insert – Tiger‑tec Silver coated, for steel & cast iron | Walter Tools The LPMW150412TR-A27 WKP25S is a rectangular milling insert designed for high‑productivity machining of steel and cast iron, offering robust wear resistance and controlled chip formation. Tiger‑tec Silver coating for wear resistance WKP25S grade for steel and cast iron Rectangular form with 1.2 mm corner radius A27 chipbreaker for reliable chip control Longer cutting edge life through a specialised coating The Tiger‑tec Silver coating combined with the WKP25S coated carbide grade provides a significant improvement in abrasive and adhesive wear resistance compared with uncoated grades. This results in more consistent cutting forces during longer tool engagement and extended intervals between insert changes. For production environments where cycle times and repeatability matter, the coated grade reduces downtime and contributes to predictable component quality. The coating also supports higher cutting speeds where process stability allows, increasing throughput without compromising tool life. Geometry engineered for surface quality and chip control The rectangular shape and the A27 chipbreaker work together to promote stable chip formation when machining both steel (P) and cast iron (K). The 1.2 mm corner radius balances edge strength and surface finish; a larger radius improves edge robustness, while the chosen size maintains acceptable part tolerance and finish. The insert’s 11° relief angle helps avoid rubbing on the flank, which reduces heat transfer into the workpiece and supports consistent surface integrity. Explained simply: the chipbreaker redirects and breaks swarf reliably, reducing interruptions and the need for manual chip clearing. Practical application guidance for efficient milling operations This indexable insert suits general and semi‑finishing applications on unalloyed and alloyed steels as well as cast iron, in line with ISO 513 material groups P and K. The coated carbide construction is best used under stable clamping and appropriate coolant or lubrication strategies to exploit its wear resistance. Selection of cutting parameters should start conservatively and be raised as process stability is confirmed; the insert’s design enables process optimisation that often pays back through lower tool consumption and higher part throughput. For mixed production runs that include both steel and cast iron components, this grade offers a pragmatic balance between tool life and machining flexibility. Contact Metav Werkzeuge for tailored machining recommendations and supply of Walter Tools Tiger‑tec Silver inserts; application engineers are available to advise on the optimal grade, insert geometry and cutting data for specific jobs Technical data Article number: LPMW150412TR-A27-WKP25S-WALTER Designation: LPMW150412TR-A27 Full designation: LPMW150412TR-A27 WKP25S Brand: Walter Tools Key dimensions Plate size: 15 mm Thickness: 4 mm Corner radius: 1.2 mm Relief angle: 11° Tolerance class: M Design & special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Shape: Rectangular Chipbreaker: A27 Material suitability: P (steel), K (cast iron) FAQ What materials is this insert suitable for? The insert is specified for machining steel (P) and cast iron (K) according to ISO classifications; the WKP25S grade is tuned for these material groups. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating increases wear resistance and supports higher cutting speeds and longer tool life, which improves process stability and reduces insert changes. What does the A27 chipbreaker do? The A27 chipbreaker manages chip flow and promotes controlled breaking of swarf, reducing the risk of long chips and facilitating safer, uninterrupted milling. Is the insert suitable for finishing or roughing? The geometry and 1.2 mm corner radius make the insert suitable for both semi‑finishing and general roughing operations; selection depends on the specific surface finish and tolerance requirements. Can the insert be used dry or with coolant? The coated carbide grade performs well with coolant to extend tool life in demanding applications; dry machining may be possible depending on the workpiece material and cutting data but should be validated in trials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
LPMW150412TR-A27 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and a stable geometry that supports predictable chip control; the result is fewer tool changes and more consistent cycle times for milling operations. Order the inserts directly via Metav Werkzeuge or request application advice from our consultants. Milling insert LPMW150412TR-A27 WKP35S — Tiger·tec Silver for steel & cast iron (Walter Tools) The LPMW150412TR-A27 WKP35S is a rectangular milling insert with a Tiger·tec Silver coated carbide grade, designed for productive machining of steel and cast iron in roughing and general milling operations Tiger·tec Silver coating for wear resistance Suited for steel and cast iron machining 11° clearance angle for stable cutting 1.2 mm corner radius for robust edge Higher tool life through advanced coating technology The Tiger·tec Silver coating combines a hard, wear-resistant layer with a tough substrate to extend service intervals and reduce unplanned downtime. For practical terms, a coated carbide grade means the insert tolerates higher temperatures and abrasive conditions typically encountered when machining steel and cast iron, so fewer insert changes are required in continuous production. This leads to measurable productivity gains and lower per-part tooling cost without sacrificing component tolerances. Stable cutting geometry for consistent results The rectangular geometry with an 11° clearance angle and 1.2 mm corner radius promotes a controlled cutting edge and reliable load distribution. The A27 chipbreaker supports predictable chip formation in interrupted and continuous cuts, reducing the risk of edge chipping and workpiece damage. Operators benefit from a more consistent surface finish and less rework; workshop planners gain from reduced tool inventory turnover and improved process stability. Application-focused performance and process security Designed for the ISO P and K material groups, the WKP35S grade from the Tiger·tec Silver series is optimised for unalloyed, alloyed steels and cast irons, addressing both abrasive wear and the heat generation typical of these materials. The insert’s tolerance class M and robust execution ensure repeatable seating in standard milling holders, aiding quick indexation and predictable tool life. For production environments seeking reliable cycle times and repeatable quality, this insert supports productive machining with fewer interruptions. Contact Metav Werkzeuge today for application-specific recommendations and to reserve LPMW150412TR-A27 WKP35S inserts for upcoming production runs; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: LPMW150412TR-A27-WKP35S-WALTER Designation: LPMW150412TR-A27 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Core specifications Clearance angle: 11° Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 04 Tolerance class: M Features and applications Plate form: Rectangular Chipbreaker: A27 Grade: WKP35S Applicable materials: P / K (steel, cast iron) Execution: W FAQ What materials is this insert suitable for? The LPMW150412TR-A27 WKP35S insert is formulated for ISO groups P and K, meaning it is intended for steel and cast iron machining. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver improves wear resistance and thermal stability, so the WKP35S grade maintains cutting performance longer and reduces insert changes in continuous milling operations. Which chipbreaker should be expected on this geometry? This rectangular insert uses the A27 chipbreaker, which is optimised for controlled chip formation in a range of milling tasks. Is the insert suitable for finishing or roughing passes? With a 1.2 mm corner radius and robust grade, the insert is suitable for productive roughing and general-purpose milling; finishing passes may require a smaller radius or dedicated finishing geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
MPHT120408-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of a sharp, uncoated carbide grade and an optimised G88 chipbreaker to secure clean machining of non-ferrous materials with consistent surface quality and efficient chip control; order directly via Metav Werkzeuge or consult our specialists for application advice. MPHT120408-G88 WXN15 milling indexable insert, G88 chipbreaker, 11° clearance – Walter Tools The MPHT120408-G88 WXN15 is a milling insert designed for precise and productive machining of non‑ferrous metals, offering a sharp, uncoated carbide grade and a geometry tuned for aluminium, copper and brass applications Sharp uncoated carbide for clean cuts Optimised G88 chipbreaker for reliable chip control 11° clearance angle for reduced rubbing 0.8 mm corner radius for fine surface finishing Stable chip control for higher throughput The proven G88 chipbreaker geometry promotes controlled chip formation and evacuation when machining softer metals, which reduces interruptions and minimises rework. By converting irregular swarf into predictable fragments, the insert supports continuous cutting at higher feed rates and contributes to lower cycle times. The result is measurable process reliability and fewer machine downtimes thanks to more consistent swarf behaviour during long runs. Sharp, uncoated carbide for burr‑free results in non‑ferrous metals The WXN15 uncoated carbide grade is optimised for non‑ferrous workpieces, producing a very sharp cutting edge that lowers cutting forces and reduces the tendency for material to stick to the tool. For aluminium, copper and brass, this means cleaner edges, reduced built‑up edge and improved dimensional stability. The 0.8 mm corner radius and 11° clearance angle combine to deliver fine surface finishes without compromising edge strength. Predictable integration into existing milling processes Belonging to the Walter N‑Sortensystem, the insert offers standardised geometry and a reliable tolerance class H for repeatable positioning and reproducible results. The compact geometry (12 mm size, 4 mm thickness) allows straightforward retrofitting into common milling cutters, enabling economical tool stocking and rapid changeover. For production environments the combination of consistent tolerances and robust chip control translates into simplified process planning and reduced machining variation. Contact Metav Werkzeuge for tailored application support and to discuss availability of Walter Tools MPHT120408-G88 WXN15 inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MPHT120408-G88-WXN15-WALTER SKU: MPHT120408-G88-WXN15-WALTER Brand: Walter Tools Product type: Milling indexable insert Series: Walter N‑Sortensystem Grade: WXN15 Chipbreaker: G88 Facts Clearance angle: 11° Corner radius: 0.8 mm Plate size: 12 mm Thickness: 4 mm Tolerance class: H Special features Uncoated carbide (sharp cutting edge) Intended for non‑ferrous metals (N) Suitable for aluminium, copper, brass Precision geometry for stable chip formation Designed for productive milling applications FAQ What materials is this insert intended for? The MPHT120408-G88 WXN15 insert is intended for non‑ferrous metals, specifically aluminium, copper and brass, using the N‑designation for appropriate workpiece groups. Is the insert coated or uncoated? This Walter Tools insert uses an uncoated carbide grade (WXN15), chosen for sharp cutting performance in soft, non‑ferrous materials. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes controlled chip segmentation and evacuation, improving process stability and reducing the risk of built‑up edge during prolonged cutting. What are the key dimensions to check for tool compatibility? Key dimensions are 12 mm plate size and 4 mm thickness, with a 0.8 mm corner radius and 11° clearance angle; these determine fit and finish in compatible milling cutters. Does this insert offer consistent positioning for repeatability? Yes, the insert comes with tolerance class H as part of the Walter N‑Sortensystem, supporting repeatable seating and reproducible machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com