MPHW120408-A57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating and the WKP25S grade for productive machining of steel and cast iron; the insert delivers stable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. MPHW120408-A57 WKP25S indexable milling insert, Tiger‑tec Silver — for steel and cast iron | Walter Tools The MPHW120408-A57 WKP25S indexable milling insert provides abrasion-resistant, high-productivity cutting for general milling applications in steel and cast iron, using a coated carbide grade optimised for demanding industrial use. Tiger‑tec Silver coating for long tool life WKP25S grade optimised for steel and cast iron A57 chipbreaker for stable chip control 11° relief angle with 0.8 mm corner radius Improve productivity with advanced coating and grade The combination of Tiger‑tec Silver and the WKP25S carbide grade is engineered to extend tool life under typical milling stresses. The coating reduces flank and crater wear, which in turn lowers the frequency of index changes and tooling downtime. For production environments this translates into a measurable increase in machining uptime and a reduced cost per component, since fewer inserts are exchanged over the life of a toolholder. The result is a robust balance of durability and consistent cutting performance. Consistent chip formation and surface quality The A57 chipbreaker geometry is designed to control chip flow and reduce burr formation, delivering a more consistent surface finish on the workpiece. Combined with the 11° relief angle and a 0.8 mm corner radius, the geometry moderates cutting forces and helps prevent premature edge chipping. For machinists unfamiliar with chipbreaker terminology: the chipbreaker interrupts and shapes the metal chips so they eject safely and predictably, improving both process reliability and component quality. Versatile use across steel and cast iron (ISO P/K) This insert is specified for machining groups P and K, meaning it is suitable for a wide range of steel and cast iron applications as classified by ISO 513. The grade’s wear behaviour is tuned to the thermal and abrasive conditions typically encountered when cutting these materials. In practice, this versatility supports mixed-production environments where batches include both unalloyed or alloyed steels and various cast irons, reducing the need for frequent tool changes and simplifying inventory. Precision fit and repeatable positioning for production tools The MPHW geometry and the tolerance class H ensure precise seating in compatible cutter bodies, supporting repeatable indexability and reliable clamping accuracy. Key dimensions such as the plate size 12 and the plate thickness 04 describe the insert form factor for correct toolholder matching; adherence to these dimensions helps maintain cutter balance and predictable cutting behaviour in automated or high-feed setups. Where process stability is essential, the proven insert geometry assists in achieving consistent cycle times and predictable tool life. For tailored cutting data, holder compatibility checks or delivery options for the Walter Tools Tiger‑tec Silver MPHW120408-A57 WKP25S insert, contact Metav Werkzeuge for fast, application-focused advice — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: MPHW120408-A57-WKP25S-WALTER Designation: MPHW120408-A57 WKP25S Manufacturer: Walter Tools Product type: Indexable milling insert (milling insert) Numbers / Core technical data Relief angle: 11° Corner radius: 0.8 mm Plate size: 12 Plate thickness: 04 Tolerance class: H Special features / Versions Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: A57 Material suitability: P (steel) / K (cast iron) Execution: W FAQ What materials is this insert suitable for? The MPHW120408-A57 WKP25S insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron in a variety of production tasks. How does the A57 chipbreaker affect machining? The A57 chipbreaker shapes and controls chip formation to reduce burrs and improve surface finish; this leads to more predictable chip evacuation and better process reliability when using the WKP25S grade. What does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, which extends the insert’s service life and supports higher productivity in continuous milling operations. Which geometric features help prevent edge damage? A combination of the 11° relief angle and 0.8 mm corner radius reduces cutting forces at the edge and improves edge robustness, helping to avoid chipping under moderate interrupted cuts. Is the insert compatible with standard MPHW toolholders? The MPHW120408-A57 form follows standard MPHW geometry; matching toolholders designed for MPHW inserts will deliver correct seating and repeatable clamping for consistent performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tooling for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product from the manufacturer.
MPHW120408-A57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, WKP35S grade and precise geometry to achieve reliable chip control and extended tool life; order the MPHW120408-A57 WKP35S directly via Metav Werkzeuge or consult our specialists for tailored recommendations. MPHW120408-A57 WKP35S — milling indexable insert with Tiger·tec Silver coating for steel and cast iron | Walter Tools MPHW120408-A57 WKP35S is a milling indexable insert designed for robust machining of steel and cast iron, optimised for secure chip formation and long service intervals in industrial milling operations Tiger·tec Silver coating for enhanced wear resistance WKP35S grade for consistent performance in P and K materials 11° clearance angle for stable cutting geometry 0.8 mm corner radius for improved surface finish Faster throughput thanks to wear‑resistant coating and grade The combination of the Tiger·tec Silver coating with the WKP35S carbide grade delivers a noticeable improvement in wear resistance and life span under cyclic loading. This coating technology combines a tough substrate with a multi-layer deposition that resists abrasive and adhesive wear, which in practice reduces the frequency of tool changes and keeps machine uptime high. For industrial shops where repeatability matters, this translates into fewer interruptions and more consistent cycle times when machining steel and cast iron. Controlled geometry for reliable surface quality A well-defined geometry is central to predictable results: the 11° clearance angle and a 0.8 mm corner radius work together to stabilise the cutting edge and reduce vibration in interrupted or continuous milling. The modest corner radius supports a good balance between edge strength and surface finish, while the clearance promotes effective shear formation. These geometric choices help to avoid premature edge chipping and improve dimensional stability, which is especially important when producing components that require tight tolerances. Practical application, chip control and shop benefits Equipped with an A57 chipbreaker and produced to tolerance class H, this insert is tailored for the machining patterns typical of the ISO P and K groups. The chipformer promotes short, manageable chips in cast iron and controlled swarf in steels, lowering the risk of entanglement and protecting the toolholder and workpiece. For production environments—from jobbing workshops to larger CNC cells—this means more reliable cycles, reduced rework and a better return on tooling investment. If application-specific data or cutting parameter tables are required, Metav Werkzeuge provides technical advice and can assist with selection and optimisation. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts and to discuss suitable cutting parameters or compatible toolholders Product data SKU: MPHW120408-A57-WKP35S-WALTER Article: MPHW120408-A57 WKP35S Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Silver Core dimensions Clearance angle: 11° Corner radius: 0.8 mm Plate size (inscribed circle): 12 mm Thickness: 0.4 mm Special features Grade: WKP35S Chipbreaker: A57 Tolerance class: H Materials: Steel (P), Cast iron (K) Substrate: Coated carbide Designation without grade: MPHW120408-A57 FAQ What materials is this insert suitable for? This insert is suitable for machining steel and cast iron (ISO groups P and K); the WKP35S grade and Tiger·tec Silver coating are matched to these material behaviours. How does the A57 chipbreaker affect machining? The A57 chipbreaker on the MPHW120408-A57 WKP35S promotes controllable, short chips in cast iron and improved chip control in steels, aiding unattended or automated milling operations. Which cutting tasks benefit most from this geometry? Stable face and shoulder milling operations that require consistent surface quality and tool life benefit from the 11° clearance angle and 0.8 mm corner radius found on this insert. Is this insert compatible with standard Walter milling cutters? The MPHW120408-A57 WKP35S is designed to fit toolholders accepting the MPHW120408-A57 designation; confirmation of holder compatibility is recommended before assembly. What performance advantages can be expected over uncoated grades? Compared with uncoated carbide, the Tiger·tec Silver coating delivers higher resistance to abrasive and adhesive wear, typically resulting in longer tool life and more stable process windows under industrial cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
MPHW120408-A57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a WPP35G grade designed for steel, and a stable 0.8 mm corner radius to achieve consistent machining results and long tool life; order the insert via Metav Werkzeuge or contact their experts for application advice. MPHW120408-A57 WPP35G indexable milling insert — Tiger‑tec Gold, for Stahl (Walter Tools) A precision MPHW120408-A57 WPP35G indexable milling insert engineered for productive face and shoulder milling of unalloyed and alloyed Stahl in ISO P applications, featuring the Tiger‑tec Gold coating and an A57 chipbreaker for controlled chip formation. Tiger‑tec Gold coating for extended life Optimised for ISO P (Stahl) applications 0.8 mm corner radius for stable cutting Chipbreaker A57 for consistent chip control Increase throughput with durable coating and grade The coated carbide grade WPP35G from the Tiger‑tec Gold family delivers a balanced mix of wear resistance and toughness tailored for the thermal and mechanical conditions of Stahl machining. With a coated carbide construction and a proprietary coating stack, the insert maintains cutting-edge stability during interrupted cuts and at elevated speeds. The combination of coating and substrate reduces flank wear and prolongs edge life, which translates into fewer tool changes and less machine downtime. This performance-oriented pairing is particularly valuable in high-volume production and mixed-batch environments where consistent results are essential. Achieve reliable surface quality and process security The insert’s chipbreaker A57 and 0.8 mm corner radius are designed to produce predictable chip formation and a robust cutting edge, reducing vibration and improving surface finish on machined faces. A 11° free angle supports smooth entry and exit, lowering cutting forces in shoulder passes and allowing for more stable toolpaths in finishing operations. For planners and operators, this means a reduced scrap rate and higher first-pass yield when machining workpieces made of Stahl, especially when stepovers and depths of cut demand both strength and edge integrity. Practical application guidance for milling operations The MPHW120408‑A57 geometry suits a range of face and peripheral milling tasks within ISO P material groups. The insert size and thickness support secure clamping in standard milling cutters, while the tolerance class H ensures consistent seat fit and repeatable positioning in toolholders. When combined with appropriate cutting parameters and coolant strategy, the insert helps to balance metal removal rate and tool life. For organisations seeking predictable productivity, the insert provides a straightforward route to optimised cycle times without compromising component quality. For tailored recommendations on using Walter Tools Tiger‑tec Gold inserts in specific Stahl applications, contact Metav Werkzeuge for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MPHW120408-A57-WPP35G-WALTER SKU: MPHW120408-A57-WPP35G-WALTER Designation: MPHW120408-A57 WPP35G Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger‑tec Gold Grade: WPP35G Facts Free angle: 11° Corner radius: 0.8 mm Plate size: 12 Plate thickness: 04 Tolerance class: H Special features Coating: Tiger·tec Gold Substrate: Coated carbide Chipbreaker: A57 Material suitability: Stahl (ISO P) Application focus: Face and shoulder milling FAQ What materials is this insert suitable for? The MPHW120408‑A57 WPP35G insert is optimised for Stahl in the ISO P material group and is intended for machining unalloyed and alloyed steels. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, extending the cutting edge life and enabling higher metal removal rates in Stahl machining. What cutting geometry benefits does the insert offer? The combination of chipbreaker A57, a 0.8 mm corner radius, and an 11° free angle provides controlled chip formation, reduced vibration and improved surface finish for face and shoulder milling. Is the insert suitable for interrupted cuts and roughing? Yes, the WPP35G grade and coated carbide substrate are balanced to provide sufficient toughness for interrupted cuts and productive roughing in Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of the Walter AG group, a leading manufacturer of precision tools for metalworking, known for high-quality cutting solutions and a close focus on process reliability and productivity. Protected trademarks and brand names belong to their respective owners. The mentioned brand denotes original, factory-new products from the manufacturer.
MPHX060304-A57 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger·tec Silver coating, the WKP25S carbide grade and a robust 0.4 mm corner radius to maintain process stability and minimise tool changes. The combination of a proven chipbreaker design and a moderate 11° relief angle supports consistent milling in steel and cast iron. Order the insert directly via Metav Werkzeuge or consult their advisers for application-specific recommendations. MPHX060304-A57 WKP25S indexable milling insert for steel and cast iron – Walter Tools MPHX060304-A57 WKP25S is a coated carbide indexable milling insert engineered for productive machining of steel and cast iron applications. Tiger·tec Silver coating for enhanced wear resistance Optimised WKP25S grade for steel and cast iron 11° relief angle for stable cutting action 0.4 mm corner radius for improved edge security Longer service life through proven coating technology The insert benefits from the Tiger·tec Silver coating combined with the WKP25S coated-carbide grade, which together reduce abrasive wear and provide a reliable edge for repetitive milling tasks. This coating system is designed to withstand the thermal and mechanical loads typical of machining steel and cast iron, resulting in extended tool life and fewer interruptions for insert changes. By favouring predictable wear patterns, the solution supports reproducible component quality and a calculable cost per part in production environments. Geometry engineered for cutting stability and surface quality A moderate 11° relief angle and a 0.4 mm corner radius create a balance between edge strength and cutting performance, reducing the risk of premature chipping while maintaining surface finish. The integrated chipbreaker A57 controls chip shape and evacuation, which helps prevent built-up edge formation and supports consistent machining forces. These geometric attributes make the insert suitable for a range of milling operations, from semi-roughing to finishing passes, depending on machine capability and cutting data. Broad material applicability and process reliability Classified for ISO material groups P (steel) and K (cast iron), the insert offers versatile use across common workshop and production tasks. The Tiger·tec Silver series is especially valued where a combination of high productivity and predictable performance is required; the grade selection prioritises stable chip formation and good resistance to abrasive wear. In practice, this supports higher material removal rates and reduced rework, contributing to overall process efficiency and consistent part quality. Practical selection and integration advice The insert is supplied in the standard MPHX geometry and is intended for use wherever the catalogue geometry suits the operation; clamping and cutter body compatibility should be checked against the ISO designation MPHX060304-A57 WKP25S. For precise cutting data, machining strategies or toolholder recommendations, Metav Werkzeuge can provide tailored information and comparisons with alternative grades or geometries to match specific machine and process constraints. Technical enquiries and requests for additional documentation are handled directly by the Metav Werkzeuge team. For application-specific advice and to source the Walter Tools MPHX060304-A57 WKP25S insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange delivery and technical support. Technical data SKU: MPHX060304-A57-WKP25S-WALTER Item designation: MPHX060304-A57 WKP25S Product type: Fräswendeschneidplatte / indexable milling insert Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.4 mm Insert size code: 06 Thickness code: 03 Special features Series: Tiger·tec Silver Grade: WKP25S (coated carbide) Chipbreaker: A57 Material application: steel (P), cast iron (K) Tolerance class: H Execution: X FAQ What materials is this insert designed for? The MPHX060304-A57 WKP25S insert is designed for machining steel (ISO group P) and cast iron (ISO group K) and is optimised for the thermal and abrasive conditions encountered in those materials. How does the Tiger·tec Silver coating benefit the machining process? The Tiger·tec Silver coating improves wear resistance and reduces abrasive wear on the cutting edge, which helps to extend tool life and maintain process stability during repetitive milling operations. What is the purpose of the A57 chipbreaker? The A57 chipbreaker shapes chips to improve evacuation and reduce the tendency for built-up edge, contributing to more consistent cutting forces and better surface quality. Can this insert be used for roughing and finishing? Yes, the geometry and grade combination supports a range of operations from semi-roughing to finishing; actual applicability depends on cutter body compatibility and cutting parameters. Which designation should be referenced when ordering or checking compatibility? Reference the ISO designation MPHX060304-A57 WKP25S and the SKU MPHX060304-A57-WKP25S-WALTER for ordering and compatibility checks. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
MPHX060304-A57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, an 11° clearance and a 0.4 mm corner radius to achieve stable cutting, predictable tool life and reliable chip control — order the MPHX060304-A57 WKP35S via Metav Werkzeuge or contact our specialists for application advice. MPHX060304-A57 WKP35S indexable milling insert — Tiger·tec Silver coated for steel and cast iron (Walter Tools) The MPHX060304-A57 WKP35S is an indexable milling insert engineered for productive roughing and semi-finishing of steel and cast iron components in industrial machining. Tiger·tec Silver coated carbide Optimised for steel and cast iron 11° clearance for stable cutting 0.4 mm corner radius for edge strength High productivity through advanced coating technology The combination of Tiger·tec Silver and a coated carbide substrate delivers enhanced wear resistance and thermal stability during heavy engagement cuts. This coating technology reduces flank wear and keeps the cutting edge sharper for longer, which translates into fewer insert changes and higher throughput in serial production. For workshops processing unalloyed and alloyed steels or abrasive cast irons, the result is a measurable reduction in downtime and a more consistent cycle time. Geometry designed for reliable chip control and surface quality The insert’s chipbreaker A57, paired with an 11° relief angle and a 0.4 mm corner radius, is optimised to produce predictable chips while maintaining a robust cutting edge. These geometric choices help to avoid vibration at higher material removal rates and contribute to a steady surface finish during roughing operations. The plate size and thickness ensure mechanical stability in standard milling cutters, supporting repeatable results in demanding milling applications. Consistent fitment and industrial compatibility Manufactured to tolerance class H, this indexable milling insert guarantees interchangeability and secure seating in compatible toolholders. The specification supports established clamping systems and simplifies inventory management for production shops. With the insert designed for P and K material groups, process planners benefit from a versatile tool that covers a broad range of turning and milling tasks without compromising on tool life or process reliability. Speak to Metav Werkzeuge for application recommendations on Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored machining advice Technical data SKU: MPHX060304-A57-WKP35S-WALTER Name: MPHX060304-A57 WKP35S Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 0.4 mm Plate size: 06 Thickness: 03 Tolerance class: H Special features Coating: Tiger·tec Silver Chipbreaker: A57 Substrate / grade: coated carbide (WKP35S) Applicable materials: steel (P) and cast iron (K) Execution: X FAQ What materials is this insert suitable for? The MPHX060304-A57 WKP35S is intended for machining steel (P) and cast iron (K) as specified by its Tiger·tec Silver grade and substrate design. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on this Walter Tools insert increases wear resistance and heat tolerance, extending tool life and maintaining cutting-edge stability under higher cutting temperatures. What effect does the 0.4 mm corner radius have on results? A 0.4 mm corner radius strengthens the cutting edge, improving resistance to chipping and enabling steadier surface quality during roughing and semi-finishing operations with the MPHX060304-A57 WKP35S. Is the chip control suitable for heavy machining? Yes, the chipbreaker A57 is designed to promote controlled chip formation and evacuation during higher material removal rates, supporting safer heavy cutting cycles. Can this insert be used in standard holders for size 06 plates? The MPHX060304-A57 WKP35S conforms to the common plate size 06 and tolerance class H, ensuring compatibility with standard indexable milling toolholders that accept this format. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are used for explanation only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
MPHX060304-A57 WPP35G WPP35G Wendeplatten - Walter Tools
MPHX060304-A57 WPP35G Fräswendeschneidplatte für Stahl von Walter Tools Die MPHX060304-A57 WPP35G ist eine beschichtete Fräswendeschneidplatte der Serie Tiger-tec Gold, konzipiert für produktive Zerspanung von Stahl. MPHX060304-A57 WPP35G von Walter Tools Tiger-tec Gold Beschichtung für lange Standzeit Optimierter Spanbrecher A57 für Stahl Freiwinkel 11° und Eckenradius 0,4 Beschichtetes Hartmetall für hohe Wirtschaftlichkeit Maximale Produktivität durch moderne Beschichtung Die Kombination aus der WPP35G Schneidstoffsorte und der Tiger-tec Gold Beschichtung sorgt für eine gleichbleibend hohe Prozesssicherheit bei der Fräsbearbeitung von Stahl. Durch die beschichtete Hartmetallstruktur wird die Standzeit verbessert, was Rüstzyklen reduziert und die Ausbringung im Fertigungsprozess erhöht. Anwender profitieren von stabiler Spanbildung und konstanter Schneidkante, sodass die Maschine länger mit hohen Schnittwerten betrieben werden kann. Präzise Spanformung und Vorschubstabilität Der Spanbrecher A57 ist speziell auf die Spanbildung beim Zerspanen von Stahl ausgelegt und ermöglicht kontrollierte Späne sowie zuverlässige Abfuhr. In Kombination mit dem Freiwinkel von 11° und dem Eckenradius 0,4 entsteht eine ausgewogene Balance zwischen Schnittstabilität und Oberflächengüte. Das Ergebnis ist eine effiziente Bearbeitung mit vorhersehbaren Werkzeugstandzeiten und reproduzierbaren Oberflächen. Einsatzbereich und Zielgruppe Diese Wendeschneidplatte richtet sich an Fertigungsbetriebe und Lohnbearbeiter, die produktive Fräsoperationen an unlegierten und legierten Stählen durchführen. Die MPHX060304-A57 WPP35G eignet sich besonders für Anwender, die Wert auf Wirtschaftlichkeit und konstante Ergebnisse legen, etwa in der Serienfertigung oder bei anspruchsvollen Losgrößen. Verarbeitungshinweise und Praktischer Nutzen Beim Einrichten empfiehlt sich eine Anpassung der Schnittparameter an die Werkstückaufnahme und Kühlmittelführung, um die Vorteile der Tiger-tec Gold Beschichtung voll auszuspielen. Bereits kleine Optimierungen bei Vorschub und Drehzahl reduzieren Verschleiß und verlängern die Nutzungsdauer der Wendeschneidplatte, was die Gesamtbetriebskosten senkt und Stillstandzeiten minimiert. Für eine produktive Umstellung auf die WPP35G-Sorte empfiehlt sich direkte Beratung bei Metav Werkzeuge; eMail: info@metav-werkzeuge.com | Telefon: +49 2822 7131930 — Verfügbarkeit und Empfehlung zur optimalen Schnittdatenanpassung gerne auf Anfrage Technische Daten Artikelnummer: MPHX060304-A57-WPP35G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Produkttyp: Fräswendeschneidplatte Bezeichnung: MPHX060304-A57 Fakten Plattengröße: 06 Plattendicke: 03 Freiwinkel: 11° Eckenradius: 0,4 Toleranzklasse: H Besonderheiten Schneidstoffsorte: WPP35G Schneidstoffklasse: beschichtetes Hartmetall Spanbrecher: A57 Ausführung: X Bearbeitbare Werkstoffe: P (Stahl) — P steht für Stahl, z. B. unlegierte und legierte Stähle FAQ Für welche Werkstoffe ist die MPHX060304-A57 WPP35G geeignet? Die MPHX060304-A57 WPP35G von Walter Tools ist für die Bearbeitung von Stahl ausgelegt (Werkstoffgruppe P) und bietet dank der Tiger-tec Gold Beschichtung gute Standzeiten bei typischen Stahl-Schnittbedingungen. Eignet sich die Wendeschneidplatte für Schrupp- oder Schlichtoperationen? Die Kombination aus Spanbrecher A57 und Eckenradius 0,4 macht die Platte vielseitig einsetzbar; sie ist für produktives Schruppen geeignet und liefert bei angepassten Schnittwerten auch stabile Schlichtergebnisse. Wie wirkt sich die Tiger-tec Gold Beschichtung auf die Standzeit aus? Die Tiger-tec Gold Beschichtung verbessert die Verschleißbeständigkeit des beschichteten Hartmetalls und trägt zu längeren Standzeiten sowie gleichbleibender Schneidkantenstabilität bei. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
MPHX060304-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp, uncoated WXN15 carbide and an optimised G88 chipbreaker for consistent chip control and fine surface quality when machining non‑ferrous materials; order directly via Metav Werkzeuge or consult the specialists for application advice. MPHX060304-G88 WXN15 indexable milling insert – sharp grade for non‑ferrous metals | Walter Tools A MPHX060304-G88 WXN15 is a precision indexable milling insert engineered for uncoated, sharp‑edge machining of non‑ferrous metals, providing controlled chip formation and reliable surface results in profile and face milling operations. Uncoated carbide grade WXN15 for sharp edges G88 chipbreaker for controlled chip formation 11° free cutting angle for efficient material removal 0.4 mm corner radius for fine surface finish High material‑removal performance with a sharp, uncoated grade The combination of uncoated carbide and the WXN15 grade is aimed at efficient machining of non‑ferrous metals such as aluminium, copper and brass. An uncoated, very sharp edge reduces friction and the tendency for material to adhere to the cutting edge, which is a typical challenge when machining soft, ductile alloys. The result is improved productivity through stable cutting action and fewer interruptions for chip or built‑up edge removal, meaning more consistent cycle times in serial production. Reliable chip control and improved surface quality The integrated G88 chipbreaker and the specified 11° free cutting angle work together to shape chips and direct them away from the cutting zone, reducing the risk of tangling or surface damage. The modest 0.4 mm corner radius supports a finer surface finish while maintaining adequate edge strength for interrupted or light finishing cuts. In lay terms, the chipbreaker mechanically folds and breaks the chip into manageable lengths, which helps to protect the workpiece and fixture, and to maintain dimensional repeatability. Clear application scope and mounting considerations The insert’s geometry and the designation within the Walter N‑series identify it as suitable for NE‑metal applications; the coded plate size and thickness make it compatible with standard milling cutter bodies that accept the MPHX060304 style. The tolerance class H indicates a production‑grade accuracy that supports repeatable positioning in the tool pocket. For process planning, this insert is particularly effective where sharp edges and low cutting forces are required to avoid smearing or material transfer on the component surface. For precise non‑ferrous milling with Walter Tools inserts such as the MPHX060304‑G88 WXN15, contact Metav Werkzeuge for specification support and current availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: MPHX060304-G88-WXN15-WALTER SKU: MPHX060304-G88-WXN15-WALTER Manufacturer: Walter Tools Product type: Indexable milling insert (milling insert) Facts Free cutting angle: 11° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 03 Tolerance class: H Special features Grade: WXN15 (uncoated cemented carbide) Chipbreaker: G88 Series: Walter N‑Sortensystem Execution/design code: X Application: non‑ferrous metals (aluminium, copper, brass) FAQ Which materials is this insert designed to machine? The MPHX060304‑G88 WXN15 insert is specified for non‑ferrous metals, explicitly aluminium, copper and brass, using the sharp WXN15 grade for reduced material adhesion. Is the insert coated or uncoated? This grade is supplied as an uncoated cemented carbide insert; the lack of coating supports exceptionally sharp cutting edges for low‑force machining of NE‑materials. How does the G88 chipbreaker affect machining results? The G88 chipbreaker produces short, controlled chips that reduce the likelihood of entanglement and help maintain consistent surface quality during milling. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius balances edge strength and finish; it contributes to a finer surface while still offering resilience for light finishing and semi‑finishing passes. What does the tolerance class H indicate for this insert? Tolerance class H denotes the manufacturing precision of the insert, supporting repeatable seating and positional accuracy in compatible milling cutter bodies. Die Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, brand‑new production of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
MPHX080305-A57 WKP25S Wendeplatten - Walter Tools
Combining the WKP25S cutting grade with the Tiger-tec Silver coating and an 11° clearance yields high productivity and stable chip formation when machining steel and cast iron; order the MPHX080305-A57 directly via Metav Werkzeuge or consult the technical team for tailored application guidance. MPHX080305-A57 WKP25S milling indexable insert — Tiger-tec Silver, 11° clearance, Walter Tools MPHX080305-A57 WKP25S is an indexable milling insert designed for robust performance in the machining of steel and cast iron, optimised for reliable chip control and repeatable results Tiger-tec Silver coating for extended life WKP25S grade for steel and cast iron machining 11° clearance angle for reduced rubbing 0.5 mm corner radius for durable edge strength Increased throughput through consistent cutting performance The combination of the Tiger-tec Silver surface treatment and the WKP25S grade provides a measurable boost to machining efficiency. The coating reduces flank wear and enhances thermal resistance, which translates into longer tool life and fewer interruptions for tool changes. This indexed geometry supports stable cutting forces, contributing to a smoother production flow and predictable cycle times. The insert’s design is particularly advantageous in medium to high-volume environments where tool-life consistency directly affects overall equipment effectiveness. Reliable chip control and material adaptability Engineered for the ISO groups P and K, the insert is well suited to machining steel and cast iron, benefiting from tailored chipbreaker geometry that promotes short, controlled chips. The grade is a coated carbide composition optimised for the typical heat and strain encountered when cutting these materials. For users less familiar with grade nomenclature: WKP25S denotes a carbide substrate with a multilayer protective coating designed to resist abrasive wear and thermal degradation. The result is improved surface finish and fewer burrs, reducing downstream rework and finishing effort. Practical geometry for robust roughing and finishing With an effective 0.5 mm corner radius and a compact size 08 profile, the insert offers a balance between edge strength and cutting accuracy; the modest radius helps absorb impact loads while enabling acceptable surface quality in interrupted cuts. The 11° clearance reduces flank contact and heat generation during engaged cutting, lowering the risk of built-up edge and enabling stable cuts across varied feed rates. Marked with a toleranzklasse H and produced in the Tiger-tec Silver series, the specification supports consistent replacement and predictable tool management in toolholding systems. Contact Metav Werkzeuge today for a machining consultation and to secure MPHX080305-A57 WKP25S inserts from Walter Tools for the next production run Technical Data SKU: MPHX080305-A57-WKP25S-WALTER Article designation: MPHX080305-A57 WKP25S Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Grade: WKP25S Execution: X Tolerance class: H Core specifications Clearance angle: 11° Corner radius: 0.5 mm Plate size: 08 Plate thickness: 03 Chipbreaker: A57 Special features Coated carbide grade Suited for steel (P) machining Suited for cast iron (K) machining Stable chip formation and process security Designed for indexable milling applications FAQ What materials is this insert designed to machine? The MPHX080305-A57 WKP25S insert is intended for steel and cast iron applications, reflecting the WKP25S grade and Tiger‑tec Silver series design. How does the Tiger‑tec Silver coating benefit productivity? The Tiger‑tec Silver coating on the WKP25S grade reduces wear and improves thermal resistance, leading to longer service life and more consistent cutting performance. What does the 0.5 mm corner radius mean for machining? A 0.5 mm corner radius provides robust edge strength for interrupted cuts and helps to extend tool life while maintaining acceptable surface finish. Is this insert suitable for finishing operations? Yes; the geometry and grade of the insert support both productive roughing and controlled finishing passes when adjusted within recommended cutting parameters. How is chip control achieved with this insert? Chip control is supported by the A57 chipbreaker geometry combined with the coated carbide grade, producing short, manageable chips in steel and cast iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the mentioned brands. The offered item is original new production from the manufacturer Walter Tools.
MPHX080305-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of a high-performance Tiger·tec Silver coating, the WKP35S coated-carbide grade and proven chip control for secure, productive milling of steel and cast iron. Order directly via Metav Werkzeuge or request advice from our consultants to match the insert to the machining task. MPHX080305-A57 WKP35S milling indexable insert, Tiger·tec Silver, for steel and cast iron — Walter Tools A robust MPHX080305-A57 WKP35S milling insert designed for productive operations in steel and cast iron machining, offering coated-carbide durability and a geometry tuned for stable chip formation. Tiger·tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining 11° relief angle, 0.5 mm corner radius A57 chipformer for stable chip control Boosted performance for steel and cast iron applications The WKP35S grade, part of the Tiger·tec Silver family, is a coated carbide solution engineered for the thermal and abrasive conditions typical when machining steel and cast iron. The multilayer coating increases wear resistance and heat management, which translates into longer tool life and fewer indexings during production runs. In practical terms, this results in more consistent cycle times and reduced tooling consumption, a clear rational advantage for batch and serial machining environments. Geometry that secures dimensional consistency A controlled relief and corner geometry support both surface quality and insert durability. The insert features an 11° relief angle and a 0.5 mm corner radius, geometries chosen to balance cutting-edge strength with the capacity to deliver acceptable surface finishes on roughing and finishing passes. The small corner radius provides improved edge stability under intermittent cutting loads, which helps to maintain tolerances and reduces the likelihood of premature chipping in challenging operations. Chip control tailored to reliable process stability The integrated A57 chipformer is configured to produce predictable, broken chips when cutting P (steel) and K (cast iron) materials. Effective chip control reduces the risk of entanglement, minimises machine stoppages for manual cleaning and contributes to a safer, more automated workflow. For production planners, this means fewer interruptions and improved machine utilisation — a direct efficiency gain that supports tighter throughput targets. Simple integration and economic advantages The insert’s designation and format make it compatible with a wide range of indexable milling bodies that accept the MPHX080305 form. The combination of a coated-carbide grade and optimised chip geometry provides a balance between tool life and cutting performance, lowering the cost per component in medium- to high-volume operations. Additionally, the insert’s tolerance class H and execution code X allow predictable mounting and repeatability during successive indexings, supporting reproducible results across batches. Contact Metav Werkzeuge for tailored tool selection and availability of the Walter Tools MPHX080305-A57 WKP35S milling insert and to discuss matching inserts to specific machine and material combinations Technical data Article number: MPHX080305-A57-WKP35S-WALTER Designation: MPHX080305-A57 Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Facts Relief angle: 11° Corner radius: 0.5 mm Plate size: 08 Plate thickness: 03 Tolerance class: H Special features Series/coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: A57 Execution: X Material application: P (steel), K (cast iron) FAQ What materials is this insert suitable for? The MPHX080305-A57 WKP35S is designed for machining steel (P) and cast iron (K), reflecting the intended application spectrum of the WKP35S grade. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WKP35S insert enhances wear resistance and thermal stability, which increases tool life and maintains cutting performance under the heat and abrasion typical of steel and cast iron machining. What is the benefit of the A57 chipformer? The A57 chipformer promotes controlled chip breaking and evacuation, reducing the chance of chip clogs and machine interruptions and supporting uninterrupted production cycles. Can this insert be used for finishing as well as roughing? With its 0.5 mm corner radius and balanced geometry, the insert can be applied to both roughing and certain finishing tasks where the chosen radius and cutting parameters meet the required surface finish and tolerance demands. Is the insert compatible with standard indexable milling holders? The MPHX080305-A57 form is compatible with milling bodies that accept this ISO-style designation; final compatibility depends on the specific toolholder clamping system and should be confirmed before ordering. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
MPHX080305-A57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP35G grade for reliable machining of steel, combined with a controlled A57 chipbreaker and compact geometry for predictable tool life and consistent surface quality. Order the MPHX080305-A57 WPP35G insert via Metav Werkzeuge or consult the technical team for application-specific advice. MPHX080305-A57 WPP35G milling insert by Walter Tools — Tiger·tec Gold, for steel machining MPHX080305-A57 WPP35G is a coated, indexable milling insert designed for efficient steel machining in general milling applications, offering improved wear resistance and consistent chip control. Tiger·tec Gold coated grade WPP35G A57 chipbreaker for stable chip formation 11° relief angle for versatile cutting 0.5 mm corner radius for balanced strength and finish Consistent chip control for higher process reliability The combination of the A57 chipbreaker and the WPP35G coated grade delivers predictable chip formation when machining steels (ISO P group). The chipbreaker geometry was developed to break and evacuate chips reliably at typical milling parameters, reducing the risk of re-cutting and tool vibration. This stability directly supports higher process reliability on CNC milling centres, allowing for steady cycle times and less interruption for chip clearing. The coated carbide base contributes to edge stability under the thermal and mechanical loads typical of steel cutting. Geometry that balances edge life and surface quality A 0.5 mm corner radius and an 11° relief angle provide a compromise between edge robustness and surface finish. The modest corner radius increases edge strength and resistance to chipping in interrupted cuts, while still permitting fine surface results on workpieces. The relief angle reduces rubbing at the flank, lowering friction and helping to preserve the cutting edge over longer tool paths. Together these geometric parameters support reliable performance across a wide range of milling strategies, from shoulder milling to light finishing passes. Coated grade engineered for steel applications The insert’s Tiger·tec Gold technology denotes a coated carbide grade optimised for wear resistance and thermal stability during the machining of steel. The coated carbide microstructure improves flank and crater wear behaviour compared with uncoated grades, extending usable tool life and maintaining dimensional consistency of machined features. For operations prioritising productivity and repeatable surface quality, this coating-grade pairing offers a well-balanced solution that reduces the need for frequent index changes while maintaining cutting performance. Contact Metav Werkzeuge for tailored application support and procurement of the Walter Tools MPHX080305-A57 WPP35G milling insert; specialists are available to advise on cutting parameters and toolholder compatibility Technical data SKU: MPHX080305-A57-WPP35G-WALTER Designation: MPHX080305-A57 WPP35G Product type: milling insert Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions & geometry Insert size: 08 Thickness: 03 Corner radius: 0.5 mm Relief angle: 11° Tolerance class: H Materials & features Grade: WPP35G (coated carbide, Tiger·tec Gold) Chipbreaker: A57 Execution: X Material application: Steel (ISO P) FAQ What materials is this insert intended for? The MPHX080305-A57 WPP35G insert is designed primarily for machining steels (ISO P), the WPP35G grade and Tiger·tec Gold coating being optimised for the thermal and mechanical demands of steel cutting. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes controlled chip formation and evacuation during milling operations, reducing recutting of chips and helping to maintain stable cutting conditions with the MPHX080305-A57 WPP35G insert. What is the benefit of the 0.5 mm corner radius? A 0.5 mm corner radius increases edge strength to resist chipping in interrupted or heavy cuts while still supporting a good surface finish; it is a compromise between robustness and fine finishing capability. Is this insert suitable for finishing passes? Yes; with its geometry and coated grade, the insert can be used for lighter finishing passes where a balance of edge life and surface quality is required. Which series does this grade belong to and what does that mean? The grade belongs to the Tiger·tec Gold series, indicating a coated carbide technology intended to improve wear resistance and process security during steel machining. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is a globally recognised manufacturer of precision cutting tools. Protected trademarks and trade names are the property of their respective owners. Product references in this description are used for explanation only and do not imply any affiliation between our company and the named brands.
MPHX080305-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp, uncoated carbide WXN15 performance, precise G88 chip control, and consistent edge geometry for reliable finishing of non-ferrous components; order directly via Metav Werkzeuge or ask the consultants for application support. MPHX080305-G88 WXN15 milling indexable insert – sharp uncoated carbide for non-ferrous metals (Walter Tools) The MPHX080305-G88 WXN15 is a milling indexable insert designed for high-quality machining of non‑ferrous materials, offering a sharp, uncoated cutting edge and a chipbreaker geometry optimised for clean chip formation. Uncoated carbide WXN15 for non‑ferrous metals G88 chipbreaker for low adhesion and clean chips 11° relief angle and 0.5 mm corner radius Precision performance for non‑ferrous components The insert is based on the WXN15 uncoated carbide grade and is intended primarily for non‑ferrous metals (ISO 513 group N). This combination yields a very sharp cutting edge, which reduces the tendency for material to stick to the tool and supports consistent workpiece quality. For operations on aluminium, copper and brass, the geometry helps to maintain stable cutting forces and predictable tool behaviour, which in turn can reduce rework and improve throughput. The direct consequence is a more reliable finishing pass and a reproducible surface finish when machining softer metals. Predictable chip control and tool life stability The G88 chipbreaker is engineered to produce short, controllable chips with minimal adhesion. Paired with an 11° relief angle, the insert reduces rubbing and heat generation at the cutting edge, improving dimensional stability over longer runs. The 0.5 mm corner radius provides a compromise between edge strength and finishing capability, so components retain good edge definition while offering resistance to accidental edge damage. These attributes support uninterrupted production by easing chip evacuation and reducing the risk of built-up edge, which is especially relevant in automated or high‑feed milling processes. System compatibility and production benefits As a member of the Walter N‑series, the insert fits established Walter tool systems and simplifies inventory management. The plate size code 08 and thickness 03 correspond to standard mounting and clamping interfaces, while the tolerance class H ensures consistent fit and repeatability across batches. Because the grade is uncoated, it suits sharp, low‑friction cutting conditions and avoids coating adhesion issues often encountered with ductile non‑ferrous alloys. Together these features support shorter setup times, easier tool selection for non‑ferrous applications and dependable process results in medium to high production environments. For procurement or specific application advice on Walter Tools MPHX080305-G88 WXN15, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for personalised assistance and availability details Technical data SKU: MPHX080305-G88-WXN15-WALTER Designation: MPHX080305-G88 WXN15 Manufacturer: Walter Tools Product type: Milling indexable insert Series: Walter N‑Sortensystem Grade: WXN15 Facts Relief angle: 11° Corner radius: 0.5 mm Plate size: 08 Plate thickness: 03 Chipbreaker: G88 Tolerance class: H Execution: X UID: MPHX080305-G88-WXN15-WALTER Special features Uncoated carbide grade WXN15 Suitable for non‑ferrous metals (ISO 513 N) Sharp, uncoated application for low adhesion Part of Walter N‑series for system compatibility FAQ What materials is this insert intended for? The MPHX080305-G88 WXN15 insert is intended for non‑ferrous metals (ISO 513 group N) such as aluminium, copper and brass; the uncoated WXN15 grade and G88 geometry reduce material adhesion. How does the G88 chipbreaker benefit machining? The G88 chipbreaker improves chip formation by producing short, predictable chips and limiting material build‑up on the edge; this results in easier evacuation and more stable production with the Walter Tools insert. Which edge geometry values influence strength and finish? The combination of an 11° relief angle and a 0.5 mm corner radius balances edge strength and surface finish, offering durability while maintaining good component edge definition in non‑ferrous machining. Is this insert compatible with standard Walter clamping systems? Yes, the insert belongs to the Walter N‑series and uses the standard size code 08 and thickness 03, enabling straightforward integration into Walter toolholders and reducing setup complexity. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between Metav Werkzeuge and the named brands; the offered item is original, brand‑new from the manufacturer.
MPMT120408-F57 WKP35G Wendeplatten - Walter Tools
Reliable machining performance arises from the combination of the WKP35G grade and the Tiger·tec Gold coating, providing long tool life and consistent cutting behaviour on steel and cast iron; choose this insert for efficient, repeatable milling processes. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. MPMT120408-F57 WKP35G indexable milling insert — Tiger·tec Gold coating (Walter Tools) The MPMT120408-F57 WKP35G is a precision indexable milling insert engineered for productive machining of steel and cast iron, offering a balanced geometry for versatile finishing and semi-finishing applications. Tiger·tec Gold coating for extended tool life Grade WKP35G optimised for P and K materials 11° relief angle for secure cutting geometry 0.8 mm corner radius for repeatable edge strength Consistent productivity through coated carbide technology The insert combines a coated carbide substrate with the Tiger·tec Gold technology to deliver a high level of wear resistance and thermal stability during interrupted and continuous cuts. This results in reliable cutting performance across varying job profiles and reduces the frequency of tool changes, supporting higher machine utilisation. The geometry and coating together improve flank and crater wear behaviour, which translates into predictable component tolerances and fewer rework cycles. Broad material capability reduces tool inventory Designed for ISO groups P (steel) and K (cast iron), the grade WKP35G offers a practical compromise between toughness and hardness to handle the typical heat and chip formation of steels, while also resisting the abrasive nature of cast-iron chips. Using a single insert family for these materials simplifies tooling management and supports faster process setups, helping to lower total machining costs per component without sacrificing surface quality. Geometry and edge preparation for repeatable results The insert’s 11° relief angle and 0.8 mm corner radius are chosen to balance edge strength with the need for accurate profiles. The radius provides a robust leading edge for intermittent cuts and moderate feeds, while the relief supports secure seating in the cutter pocket, reducing vibration and the risk of chipping. Tolerance class M ensures consistent fit and interchangeability across holder systems, enabling quick insert changes and consistent runout behaviour. Practical advantages on the shop floor With chipbreaker designation F57 and a compact plate format, this insert is suited to a wide range of pocket geometries and cutter bodies used in modern CNC milling. The combination of grade and chip control reduces edge build-up and improves swarf evacuation, which helps maintain surface finish and increases cycle stability. For applications requiring predictable tool life and stable results, this insert contributes directly to process reliability and up-time improvement. For application-specific recommendations and to secure Walter Tools Tiger·tec Gold inserts such as the MPMT120408-F57 WKP35G, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert guidance. Technical data Article number: MPMT120408-F57-WKP35G-WALTER Designation: MPMT120408-F57 WKP35G indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Free angle: 11° Corner radius: 0.8 Plate size: 12 Plate thickness: 04 Tolerance class: M Chipbreaker: F57 Special features Grade: WKP35G (coated carbide) Material suitability: P (steel) Material suitability: K (cast iron) Execution: T Material code: P / K FAQ What materials is this insert suitable for? The WKP35G grade is designed specifically for steel (ISO group P) and cast iron (ISO group K), enabling machining of both material families with consistent wear behaviour. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating increases thermal resistance and wear protection, meaning the insert maintains cutting edge integrity longer under typical milling conditions. Which geometry parameters support stable cutting? The combination of an 11° relief angle and a 0.8 mm corner radius gives the insert the balance between edge strength and dimensional accuracy needed for repetitive milling tasks. Is this insert compatible with standard MPMT toolholders? The insert designation matches common MPMT-style pockets; tolerance class M ensures secure seating and interchangeability across compatible cutter bodies. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
MPMT120408-F57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKP35S grade and an 11° clearance angle for productive, reliable milling of steel and cast iron; order directly via Metav Werkzeuge or consult our technical advisors for application-specific setup. MPMT120408-F57 WKP35S indexable milling insert — Tiger·tec Silver, for steel and cast iron | Walter Tools The MPMT120408-F57 WKP35S is an indexable milling insert engineered for high-productivity roughing and semi-finishing of steel and cast iron components. Tiger·tec Silver coating for extended tool life WKP35S grade for steel and cast iron 11° clearance angle for stable cutting 0.8 mm corner radius for reliable edge strength High-efficiency cutting with a modern coating system The combination of the Tiger·tec Silver coating and the WKP35S carbide grade results in stable machining performance and extended tool life. The advanced coating reduces abrasive and adhesive wear, which means longer intervals between indexings and fewer tool changes during production. For operations where cycle time and tool-change frequency matter, this insert supports higher metal removal rates while maintaining predictable flank wear and consistent component quality. Optimised geometry for dependable chip control and edge stability With an F57 chipbreaker and a 0.8 mm corner radius, the geometry is tuned to produce controllable, short chips in both ISO P (steel) and ISO K (cast iron) applications. The 11° clearance angle reduces cutting forces and helps maintain process stability, particularly in interrupted cuts or when engaging heavier depths of cut. The result is a reduced risk of edge chipping and more consistent surface finish on workpieces, supporting efficient downstream processes. Practical benefits for shop-floor productivity This insert’s nominal size of 12 mm and thickness code 04 allow compatibility with a wide range of Walter Tools milling cutters and standard toolholders; compatibility minimises inventory complexity. The indexable design offers the immediate economic advantage of multiple usable cutting edges per insert, which lowers per-part tooling cost and simplifies replenishment. The insert’s tolerance class M ensures consistent fit and repeatable seating in tool bodies, supporting automated tool changes where used. Application guidance and material suitability Designed for ISO groups P and K, the insert is suitable for unalloyed and alloyed steel as well as cast iron, matching the common demands of general engineering and heavy‑duty component machining. The WKP35S grade is optimised for typical steel heat generation and the abrasive nature of cast iron, offering a balance between wear resistance and toughness. For unfamiliar setups, begin with manufacturer-recommended speeds and feeds for the material group, then adjust based on surface finish and tool life observations. For productive milling with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for availability and personalised application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: MPMT120408-F57-WKP35S-WALTER Article designation: MPMT120408-F57 Full ISO designation: MPMT120408-F57 WKP35S Manufacturer: Walter Tools Product type: Indexable milling insert Facts Clearance angle: 11° Corner radius: 0.8 mm Plate size: 12 mm Thickness code: 04 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: F57 Suitability: ISO P (steel) and ISO K (cast iron) Execution: T FAQ What materials is this insert suitable for? The WKP35S grade in the MPMT120408-F57 WKP35S insert is designed for ISO P (steel) and ISO K (cast iron), providing wear resistance for abrasive castings and thermal stability for steel machining. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on this indexable milling insert lowers abrasive wear and improves heat resistance, which extends tool life and helps maintain consistent cutting performance over longer tool cycles. What does the 0.8 mm corner radius mean for component quality? A 0.8 mm corner radius offers a compromise between edge strength and achievable surface finish: it reduces the risk of chipping under heavy cuts while still allowing acceptable geometric detail on milled edges. Is the insert compatible with standard toolholders? The MPMT120408-F57 designation and tolerance class M indicate conformity with common indexable insert geometries and seating standards, enabling use in a broad range of compatible milling cutters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
MPMT120408-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the robust WPP35G grade for consistent machining of steel; the combination of an 11° clearance and a 0.8 mm corner radius provides reliable edge strength and controlled chip formation. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. MPMT120408-F57 WPP35G — Milling indexable insert, 11° clearance, 0.8 mm radius (Walter Tools) A MPMT120408-F57 WPP35G milling indexable insert engineered for productive steel machining with optimised chip control and dependable edge life. Tiger‑tec Gold coated carbide WPP35G Optimised for steel machining (ISO P) 11° clearance for controlled chip flow 0.8 mm corner radius for improved edge strength Longer tool life for uninterrupted production The combination of the Tiger‑tec Gold coating and the WPP35G grade delivers a balanced performance aimed at increased tool life and process reliability. The coating improves wear resistance while the grade is tuned for the thermal and mechanical demands of steel cutting, reducing the frequency of index changes. This results in lower tooling costs per part and a steadier production rhythm. The result is not only durable cutting edges but a predictable maintenance cycle that supports planning and throughput. Controlled chips and improved surface quality The insert’s F57 chipbreaker together with an 11° clearance angle ensures consistent chip formation and evacuation when machining steels under ISO P. The 0.8 mm corner radius increases edge robustness and helps avoid premature chipping during interrupted cuts, contributing to a consistent surface finish. For operations where process stability and repeatability matter, the geometry reduces the risk of unexpected scrap and supports higher feed rates while keeping surface quality within specification. Practical compatibility and application guidance Designed primarily for steel applications (ISO P), the insert suits a wide range of unalloyed and alloyed steels and is classified within tolerance M, offering reliable interchangeability in standard milling toolholders. The design supports productive roughing and finishing strategies when paired with appropriate cutter bodies and clamping systems. For customers seeking an economical, high‑performance solution for steel machining, this insert represents a straightforward upgrade path that balances productivity and part quality. Contact Metav Werkzeuge to discuss integrating Walter Tools Tiger‑tec Gold inserts into existing toolsets, request tailored cut‑data, or confirm stock availability and delivery options. Technical Data SKU: MPMT120408-F57-WPP35G-WALTER Designation: MPMT120408-F57 WPP35G Product: Milling indexable insert Brand: Walter Tools Facts Plate size: 12 Plate thickness: 04 Clearance angle: 11° Corner radius: 0.8 mm Tolerance class: M Special features Coating/grade: Tiger‑tec Gold, WPP35G Chipbreaker: F57 Suitable for: steel (ISO P) Series: Tiger‑tec Gold Execution: T FAQ Which materials are best machined with this insert? This insert is optimised for steel machining and intended primarily for ISO P applications; the WPP35G grade is tuned to handle the heat and chip forms typical of unalloyed and alloyed steels. What does the Tiger‑tec Gold designation mean for performance? Tiger‑tec Gold denotes the coating technology and grade category that enhances wear resistance and process stability; in practice the MPMT120408-F57 WPP35G insert offers longer edge life and consistent cutting under steel machining conditions. How does the F57 chipbreaker affect cutting? The F57 chipbreaker is shaped to produce controlled chip segmentation in steel, improving chip evacuation and reducing the risk of re‑cutting, which supports stable feeds and better surface finish. Is the insert suitable for both roughing and finishing operations? Yes, the geometry and 0.8 mm corner radius make the insert versatile for productive roughing as well as for finishing passes where a robust edge and good surface quality are required. Are there special mounting or clamping requirements? Standard indexable milling clamping systems compatible with MPMT‑style inserts and tolerance class M are suitable; ensure correct seat and torque values as specified by the cutter body manufacturer to achieve intended performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision metal‑cutting tools and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation between our company and the brand owner. The item offered is original, factory‑new goods of the manufacturer.
MPMT120408-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the F57 chipbreaker to achieve longer edge life and predictable chip control when machining rostfreier Stahl and high‑temperature alloys; the robust geometry and tolerance class M support consistent production. Order the MPMT120408‑F57 WSM35G directly via Metav Werkzeuge or ask our consultants if needed. MPMT120408-F57 WSM35G indexable milling insert — Tiger‑tec Gold coating, 11° relief — Walter Tools The MPMT120408-F57 WSM35G is a coated carbide milling insert optimised for machining rostfreier Stahl and heat‑resistant superalloys, offering stable chip formation and extended tool life in demanding production environments Tiger·tec Gold coating for improved wear resistance Optimised for rostfreier Stahl and superalloys Chipbreaker F57 for controlled chip flow 11° relief angle for positive cutting action Corner radius 0.8 mm for surface stability Longer edge life through advanced coating and grade The combination of Tiger‑tec Gold coating with the WSM35G substrate provides enhanced wear resistance and thermal stability under elevated cutting temperatures. Coating technology minimises abrasive wear and reduces adhesion tendencies on difficult‑to‑machine materials, which translates into fewer tool changes and more uninterrupted production time. For operations that prioritise productivity, this cutting grade supports a reliable balance between edge life and surface quality. Secure chip control for continuous machining The integrated chipbreaker F57 promotes consistent chip segmentation and evacuation, reducing the risk of built‑up edge and process interruptions. Stable chip formation improves tool life and lowers the likelihood of part rework by maintaining a predictable cutting zone. In practice, the chip management offered by this insert reduces downtime and simplifies chip handling in automated or volume production settings. Geometry optimised for positive cutting and surface finish A 11° relief angle combined with a corner radius 0.8 mm produces a positive cutting action that lowers cutting forces while supporting a stable tool edge. The geometry suits finishing and light‑to‑medium roughing passes where surface integrity is essential. The tolerance class M ensures repeatable insert dimensions for predictable clamping and reproducible results across tool changes. Production confidence with a specialist grade Designed for workshops and production facilities working with tough alloys, this insert supports machining of rostfreier Stahl and heat‑resistant superalloys with reduced process variability. Walter Tools’ focus on consistent coating quality and grade performance means fewer in‑process adjustments and a higher first‑pass yield — a direct contribution to improved OEE (overall equipment effectiveness) in precision metalworking. Contact Metav Werkzeuge for application advice and availability on Walter Tools Tiger‑tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: MPMT120408-F57-WSM35G-WALTER Wendeplatte designation: MPMT120408-F57 WSM35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Relief angle: 11° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Special features Grade: WSM35G Chipbreaker: F57 Material suitability: S / M (heat‑resistant superalloys; rostfreier Stahl) Tolerance class: M Execution: T FAQ Which materials is this insert best suited for? The MPMT120408‑F57 WSM35G is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering secure chip formation and reduced adhesion. What benefit does the Tiger‑tec Gold coating deliver? Tiger‑tec Gold on the WSM35G grade improves wear resistance and thermal stability, helping to extend tool life under elevated cutting temperatures. How does the F57 chipbreaker affect machining? The F57 chipbreaker provides controlled chip segmentation and evacuation, which supports continuous machining and reduces the likelihood of built‑up edge. Is the geometry suited for finishing operations? Yes, the combination of a positive 11° relief angle and a 0.8 mm corner radius supports stable finish quality while maintaining reasonable cutting forces. What is the standard designation and article reference for ordering? Order using the designation MPMT120408‑F57 WSM35G or article number MPMT120408‑F57‑WSM35G‑WALTER; the item is supplied by Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original factory‑new goods of the manufacturer.
MPMT120408-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of versatile PVD performance, stable chip control and an 11° clearance for reliable milling cycles — order the insert directly via Metav Werkzeuge or ask our technical consultants for application support. MPMT120408-F57 WSP45G Milling indexable insert — Tiger‑tec Gold (Walter Tools) The MPMT120408-F57 WSP45G is a PVD‑coated milling indexable insert designed for secure chip control and consistent performance when machining steel, stainless steel and heat‑resistant alloys. Tiger‑tec Gold PVD coating for high wear resistance Versatile for steel, stainless steel and superalloys 11° clearance for safe cutting geometry 0.8 mm corner radius for robust edge strength High‑performance coating for extended tool life The Tiger‑tec Gold PVD coating paired with the WSP45G grade provides a balance between wear resistance and toughness, which translates into longer tool life and fewer interruptions for insert changes. The coating technology improves thermal stability at the cutting edge, helping to reduce flank wear during serial and interrupted milling. For production environments, this means more predictable tool behaviour and less scrap — the result is higher uptime and better process economy. Reliable chip control and consistent cutting geometry Equipped with the F57 chipbreaker and an 11° clearance angle, this insert promotes stable chip formation even under varying cutting conditions. The 0.8 mm corner radius increases edge strength, reducing the risk of chipping on interrupted cuts and improving surface finish consistency. Operators with varying expertise benefit from easier process setup: the geometry supports predictable chip evacuation and reduces the likelihood of built‑up edge when machining adhesive or tough materials. Broad material range and application flexibility This insert is specified for groups P, M and S — meaning it is suitable for machining unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys/Titanium. The WSP45G grade is a tough, PVD‑coated carbide designed especially for milling; it handles the heat and mechanical loads typical of these materials. For shops seeking one reliable grade across diverse workpieces, this insert reduces tool inventory complexity while maintaining process security. Productivity, tolerance and repeatability for series production With a clear tolerance class M and ISO designation MPMT120408‑F57 WSP45G, the insert is produced to consistent dimensional standards that support repeatable tool offsets and predictable part tolerances. The solid manufacturing standard enables efficient toolpath programming and stable results on CNC milling machines. For production planners, that means reduced setup time and consistent part quality across batches. For production environments requiring robust, versatile milling performance, select the Walter Tools Tiger‑tec Gold MPMT120408‑F57 WSP45G insert and contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MPMT120408-F57-WSP45G-WALTER Designation: MPMT120408-F57 WSP45G Product type: Milling indexable insert Brand: Walter Tools Series: Tiger‑tec Gold Facts Clearance angle: 11° Corner radius: 0.8 mm Insert size: 12 Plate thickness: 04 Special features Coating: Tiger‑tec Gold (PVD) Grade: WSP45G (PVD‑coated carbide) Chipbreaker: F57 Applicable materials: steel (P), stainless steel (M), superalloys/Titanium (S) Tolerance class: M Execution: T FAQ Which materials can be machined with this insert? The MPMT120408‑F57 WSP45G insert is specified for groups P, M and S, making it suitable for steel, stainless steel and heat‑resistant superalloys/Titanium in milling applications. What is the purpose of the F57 chipbreaker? The F57 chipbreaker is designed to produce manageable chips and support stable cutting forces; in combination with the WSP45G grade it improves chip control and surface quality during milling. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength, reduces chipping risk on interrupted cuts and contributes to a consistent surface finish while preserving acceptable cutting forces. Is the insert suited for serial production? Yes — the Tiger‑tec Gold coating and tolerance class M support repeatable dimensions and predictable tool life, making the insert well suited for series production. What does the Tiger‑tec Gold coating provide? Tiger‑tec Gold is a PVD coating system that enhances thermal and wear resistance at the cutting edge, resulting in extended tool life and improved process security under demanding milling conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation and identification purposes. The offered article is original and factory‑new.
MPMX060304-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for reliable, long-lasting machining of steel and cast iron; the F57 chipbreaker and 11° clearance provide consistent chip control and edge strength. Order the insert directly via Metav Werkzeuge or ask our consultants if assistance is required. MPMX060304-F57 WKP35G – Indexable milling insert, Tiger·tec Gold for steel & cast iron | Walter Tools MPMX060304-F57 WKP35G is an indexable milling insert engineered for productive, high-security milling of unalloyed and alloyed steel as well as cast iron in industrial applications. Tiger·tec Gold coating for extended life WKP35G grade for steel and cast iron F57 chipbreaker for controlled chips 11° clearance with 0.4 mm corner radius Enhanced productivity through advanced coating and grade The combination of the Tiger·tec Gold coating with the WKP35G grade delivers measurable improvements in tool life and process stability. The coating reduces abrasive wear and helps maintain a stable cutting edge under the thermal and mechanical loads typical when machining steel and cast iron. As a result, cycle times remain consistent and insert changes are less frequent, supporting uninterrupted production and predictable tool costs. Predictable chip formation and surface quality Equipped with the F57 chipbreaker, this indexable insert promotes controlled chip segmentation, which reduces the risk of long, stringy chips and helps maintain machine uptime. The 11° clearance angle and a 0.4 mm corner radius contribute to edge robustness and improve finish on the workpiece. These geometry choices are especially beneficial where reliable chip evacuation and consistent surface quality are required in medium to heavy milling operations. Robust application scope and handling benefits Designed for general milling tasks, the insert’s material suitability (P / K) means it is optimised for both machining steels and cast irons according to ISO 513 groupings. The plate size and thickness codes support straightforward toolholder selection and simplify inventory management in the workshop. The insert’s tolerance class M ensures repeatable seating and positional accuracy in compatible milling cutters, aiding operational reliability across batches. Practical advantages for the production environment With an execution code of X and the proven Tiger·tec Gold technology, the insert offers a balance between wear resistance and cost efficiency. The configuration reduces unplanned interruptions and supports steady-state productivity. For operations aiming to improve process security and cut variability, this solution provides a pragmatic step towards higher overall equipment effectiveness. For tailored machining recommendations on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: MPMX060304-F57-WKP35G-WALTER Article designation: MPMX060304-F57 WKP35G Product type: Indexable milling insert Series: Tiger·tec Gold Grade: WKP35G Execution: X Facts Clearance angle: 11° Corner radius: 0.4 mm Plate size: 06 Thickness code: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: F57 Suitable for: Steel (P) and Cast iron (K) Material classification: P / K Wendeplatte ISO designation: MPMX060304-F57 WKP35G FAQ What materials is this insert suitable for? The MPMX060304-F57 WKP35G insert from Walter Tools is suitable for machining steel (ISO group P) and cast iron (ISO group K), as indicated by its P / K material suitability and the WKP35G grade. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating improves wear resistance and thermal stability, which extends the service life of the insert and contributes to consistent performance when milling steels and cast irons. What benefits does the F57 chipbreaker provide? The F57 chipbreaker promotes controlled chip formation and easier evacuation, reducing the likelihood of chip interference and helping to maintain stable cutting conditions and surface finish. Is the insert suitable for heavy milling operations? With a 11° clearance and a 0.4 mm corner radius, the insert is designed to offer robust edge strength and reliable chip control, making it appropriate for many medium to heavy milling tasks in steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification and comparison purposes only; there is no affiliation or endorsement implied between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory-new product of the manufacturer.
MPMX060304-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP35S grade for durable performance in steel and cast iron machining; order directly via Metav Werkzeuge or consult our technical team for application guidance. MPMX060304-F57 WKP35S — milling insert for steel and cast iron | Walter Tools A MPMX060304-F57 WKP35S milling insert designed for productive, reliable cutting of steel and cast iron in industrial milling applications Tiger·tec Silver coating for long tool life Suited for steel and cast iron machining Corner radius 0.4 mm for precise edges 11° clearance angle for stable cutting Higher process reliability through modern coating technology The combination of the Tiger·tec Silver platform and the WKP35S grade provides a coated carbide solution optimised for the thermal and abrasive stresses typical of steel and cast iron cutting. The multi-layer coating reduces flank wear and supports consistent edge strength under cyclic loads. For workshop planners and production engineers this results in fewer tool changes and more predictable component quality when machining ISO group P (steel) and K (cast iron), translating into measurable uptime improvements and reduced scrap rates. Consistent chip control and stable cutting geometry The integrated F57 chipbreaker is engineered for controlled chip formation in both short and medium-length chips, improving evacuation and surface finish while reducing the risk of built-up edge. Combined with a corner radius 0.4 mm and an 11° clearance angle, the geometry supports stable cutting forces and repeatable tool life. The tolerance class M ensures dimensional consistency across batches, which is essential when multiple inserts are mounted in a cutter body to maintain concentricity and balance. Productivity gains through application focus and simple system integration Designed for industrial milling, this insert is intended to be used in modular cutter systems where fast indexing and predictable performance are priorities. The grade’s balance of wear resistance and toughness helps to extend service intervals and reduce overall tooling costs per part. As a premium component from Walter Tools, the insert supports higher metal-removal rates on the appropriate materials and simplifies tool selection for mixed production runs involving steel and cast iron components. Contact Metav Werkzeuge for tailored application advice and to secure MPMX060304-F57 WKP35S inserts for your next production cycle; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MPMX060304-F57-WKP35S-WALTER Designation: MPMX060304-F57 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Clearance angle: 11° Corner radius: 0.4 mm Size designation: 06 Thickness designation: 03 Tolerance class: M Special features Grade: WKP35S (coated carbide, Tiger·tec Silver) Chipbreaker: F57 Material suitability: steel (P) and cast iron (K) Execution: X Application focus: stable chip control, long tool life FAQ What materials is the insert suitable for? The MPMX060304-F57 WKP35S insert is specified for steel (P) and cast iron (K) according to the grade data; these material groups are the intended application range for this grade. What does WKP35S mean for performance? WKP35S is a Walter Tools grade in the Tiger·tec Silver family; it denotes a coated carbide formulation optimised for wear resistance and thermal stability in steel and cast iron milling. Can the insert be used for high-speed finishing? The combination of the Tiger·tec Silver coating and the F57 chipbreaker supports higher cutting parameters in many milling operations, but final speed and feed values depend on machine rigidity and workpiece setup. How does the F57 chipbreaker affect surface finish? The F57 chipbreaker is designed to promote controlled chip formation and evacuation, which contributes to improved surface finish and reduced risk of chip entanglement in interrupted cuts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
MPMX060304-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Gold coating, optimised chip control and a precise 11° relief for consistent productivity and predictable tool life. Order the MPMX060304-F57 WPP35G directly via Metav Werkzeuge or consult our specialists for application-specific advice. MPMX060304-F57 WPP35G – Milling insert Tiger·tec Gold for steel by Walter Tools The MPMX060304-F57 WPP35G is a coated carbide milling insert engineered for efficient steel machining, offering controlled chip formation and extended edge life. Tiger·tec Gold coated carbide grade WPP35G Optimised chip control with F57 breaker 11° clearance angle for secure engagement For steel machining, robust edge life Longer productive life through advanced coating and grade The Tiger·tec Gold technology in this insert provides a balanced combination of wear resistance and toughness, which reduces flank wear under intermittent and continuous cutting. As a coated carbide grade, WPP35G is formulated for common steel applications (ISO group P), so the result is improved tool life and less frequent index changes. This tangible extension of service life translates into fewer machine stops and more predictable production cycles, making the tool a pragmatic choice for shops targeting stable throughput and lower tooling costs. Reliable chip control and geometry for consistent finishes With an F57 chipbreaker and an effective cutting geometry, the insert promotes controlled chip formation and evacuation in typical steel cutting conditions. The combination of chipbreaker design and the listed relief angle of 11° ensures stable cutting forces and helps to avoid built-up edge, which results in a more consistent surface quality and reduced rework. For applications where chip handling and surface finish matter, the insert’s geometry supports efficient machining even in mixed-batch environments. Precision dimensions and repeatability for production processes The insert’s nominal dimensions (plate size 06, thickness 03, corner radius 0.4 mm) and tolerance class M ensure interchangeability and repeatable cutting behaviour in standard toolholders. The clear specification of these parameters supports process planning and simplification of tool inventory: the same insert geometry can be used across multiple fixtures and setups without unexpected variation. Traceable specifications allow for reliable feed and speed calculations and assist in achieving consistent cycle times. Application focus: engineered for steel machining Designed primarily for steel (ISO group P), this grade is optimised for the typical heat and chip formation associated with ferrous alloys. The WPP35G grade and Tiger·tec Gold coating balance wear resistance and toughness to provide stable performance across a range of steel types. For workshops aiming to standardise on a single versatile grade for general steel turning and milling operations, this insert offers a pragmatic compromise between life and edge strength. Contact Metav Werkzeuge for application recommendations, batch availability and to request cutting data for MPMX060304-F57 WPP35G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: MPMX060304-F57-WPP35G-WALTER Designation: MPMX060304-F57 WPP35G Brand: Walter Tools Product type: Milling insert Series: Tiger-tec Gold Facts Clearance angle: 11° Corner radius: 0.4 mm Plate size: 06 Thickness: 03 Chipbreaker: F57 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP35G (coated carbide) Material application: Steel (ISO P) Execution: X FAQ What materials is this insert intended for? The MPMX060304-F57 WPP35G is designed primarily for machining steel (ISO group P) and the WPP35G grade is optimised for the thermal and chip characteristics of these materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert improves wear resistance while maintaining toughness, which extends tool life and supports consistent machining results. Which chipbreaker is fitted and what does it do? This insert features an F57 chipbreaker, which promotes controlled chip formation and evacuation, helping to maintain surface quality and reduce risk of built-up edge in steel machining. Are the dimensions and tolerances suitable for repeatable setups? Yes—the plate size 06, thickness 03 and tolerance class M provide repeatable geometry for standard toolholders and support consistent process parameters. Can this insert be used for finishing operations? With its geometry and coating combination, the insert is suitable for general finishing and semi-finishing in steels, delivering reliable surface quality when cutting parameters are matched to the application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
MPMX060304-F57 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust edge stability and a precise 11° relief angle to maintain steady productivity in challenging milling applications; order supplies via Metav Werkzeuge or consult our specialists for application advice. MPMX060304-F57 WSM35G indexable milling insert — for stainless steels and heat‑resistant superalloys, Walter Tools MPMX060304-F57 WSM35G is an indexable milling insert engineered for heavy milling in demanding materials; it pairs a coated carbide grade with a geometry optimised for secure chip formation and stable cutting edges in difficult‑to‑machine alloys Tiger·tec Gold coating for long tool life Optimised for stainless steels and superalloys 11° relief angle for secure chip formation 0.4 mm corner radius for consistent surface finish Consistent performance in difficult materials The coated carbide grade WSM35G, part of the Tiger·tec Gold series, is tailored to the thermal and mechanical demands of stainless steels (M) and heat‑resistant superalloys (S). The combination of a wear‑resistant coating and an application‑oriented chipbreaker supports stable chip control and edge stability, reducing unexpected tool changes. For production environments where reduced interruption and repeatable part quality matter, this insert offers a measurable contribution to process reliability and lower total machining costs. Geometry that strengthens surface quality and repeatability The insert geometry — including the 11° relief angle and a 0.4 mm corner radius — has been selected to balance cutting edge strength with surface finish requirements. The F57 chipbreaker promotes predictable chip behaviour under varying depths of cut and feed rates, which helps to maintain dimensional repeatability and reduce vibration. These characteristics translate into fewer reworks and more consistent component surfaces during serial milling operations on tough alloys. Practical application guidance and productivity benefits Designed for indexable milling applications, the insert suits face and shoulder milling where high thermal load and build‑up edge risk are present. The coated grade supports both elevated cutting speeds and the intermittent engagement common in roughing passes, enabling longer service intervals and lower tooling consumption. When integrated into a tooling system from a recognised brand, the result is improved cycle times and a more economical process per component produced. For tailored recommendations on using this Walter Tools Tiger·tec Gold insert in specific machining tasks, contact Metav Werkzeuge for application support and supply options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MPMX060304-F57-WSM35G-WALTER Designation: MPMX060304-F57 WSM35G Product type: Fräswendeschneidplatte / indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 11° Corner radius: 0.4 mm Insert size: 06 Thickness: 03 Chipbreaker: F57 Tolerance class: M Special features Coating grade: WSM35G Coating technology: Tiger·tec Gold Material groups: S / M Suitable for: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) Execution: X FAQ What materials is this insert intended for? The MPMX060304-F57 WSM35G insert is designed primarily for stainless steels (M) and heat‑resistant superalloys (S); the WSM35G grade provides thermal and edge stability for these groups. How does the Tiger·tec Gold coating help in milling operations? The Tiger·tec Gold coating on the WSM35G grade improves wear resistance and supports longer tool life under high thermal load, which benefits sustained milling of tough materials. Which geometry features improve surface finish? The combination of the 0.4 mm corner radius and the F57 chipbreaker in this insert promotes a controlled cutting edge engagement, resulting in a more consistent surface finish and reduced risk of built‑up edge. Is the insert suitable for high‑speed milling? The coated WSM35G grade is engineered to tolerate elevated cutting speeds typical in modern milling strategies, supporting productivity while maintaining edge stability. Can this insert be used for roughing and finishing operations? Yes, the design and grade of the MPMX060304-F57 WSM35G allow its use across roughing and light finishing passes, depending on the toolholder and process parameters chosen. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
MPMX060304-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a coated-carbide grade that combines thermal stability, broad material compatibility and a geometry tuned for secure chip control; the result is consistent, productive milling across steels, stainless steels and heat‑resistant alloys. The Tiger·tec Gold WSP45G grade and the F57 chipbreaker deliver extended tool life and reliable surface quality. Order the insert directly via Metav Werkzeuge or ask the Metav consultants for application support. MPMX060304-F57 WSP45G — Milling indexable insert, Tiger·tec Gold (Walter Tools) The MPMX060304-F57 WSP45G is a coated carbide milling insert designed for versatile face and peripheral milling of steel, stainless steel and heat‑resistant alloys, combining a PVD layer with a stable geometry for predictable cutting performance. Tiger·tec Gold PVD coating for tool life Versatile for steel, stainless and superalloys 0.4 mm corner radius with 11° relief angle Consistent performance through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade yields a balance between wear resistance and toughness that is important in milling. The PVD finish reduces abrasive wear at elevated temperatures while maintaining a robust edge for intermittent cuts. For production environments where machining conditions vary between roughing and semi‑finishing, this coated carbide design reduces the frequency of insert changes and supports longer uninterrupted cycles, which leads to more predictable throughput and lower tool‑handling time. Secure chip control and geometry that protects the cutting edge The integrated F57 chipbreaker is engineered for controlled chip formation when machining P‑, M‑ and S‑group materials. Its profile promotes short, manageable chips that evacuate reliably in both climb and conventional milling, lowering the risk of surface damage and machine downtime. The 0.4 mm corner radius combined with an 11° relief angle supports stable cutting, improving resistance against edge chipping during heavy engagement and helping to maintain an even surface finish with fewer passes. Broad material range and application benefits for shop flexibility Designed for use on steels, stainless steel and high‑temperature alloys, this insert offers process flexibility across a wide material mix. The grade’s toughness assists with materials that tend to work‑harden, while the coating improves thermal endurance when cutting alloys that trap heat at the cutting zone. For shops seeking a single insert family that covers roughing to semi‑finishing tasks, the design of the insert reduces tool inventory complexity and simplifies grade selection for mixed production batches. Discuss specific machining parameters and optimise insert selection with Metav Werkzeuge — contact Metav Werkzeuge for tailored recommendations on the Tiger·tec Gold WSP45G insert and application settings via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MPMX060304-F57-WSP45G-WALTER Label: Fräswendeschneidplatte MPMX060304-F57 WSP45G Walter Tools Product type: Fräswendeschneidplatte Facts Relief angle: 11° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 03 Chipbreaker: F57 Tolerance class: M Special features Coating / series: Tiger·tec Gold (PVD) Grade: WSP45G (coated carbide) Substrate materials indicated: P / M / S Execution: X FAQ What materials is this insert suitable for? The MPMX060304-F57 WSP45G insert is suitable for steels, stainless steels and heat‑resistant superalloys, reflecting the P / M / S designation of the Walter Tools grade. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance at elevated temperatures while preserving edge toughness, helping to extend tool life in mixed milling tasks. What role does the F57 chipbreaker play? The F57 chipbreaker promotes controlled chip formation for safer evacuation and improved surface quality during both face and peripheral milling operations. Can the insert handle interrupted cuts? Yes, the combination of the robust coated‑carbide grade and the 0.4 mm corner radius provides resilience against edge chipping during interrupted or heavy cuts. Is this insert intended for finishing operations? The geometry and coating support semi‑finishing as well as roughing; where a finer surface finish is required, parameters can be adjusted to leverage the insert’s stable cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and do not indicate any affiliation. The described article is an original, factory‑new product from the named manufacturer.
MPMX080305-F57 WKP35G WKP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WKP35G grade and the F57 chipbreaker yields extended tool life and consistent chip control in demanding milling operations on steel and cast iron. Order the MPMX080305-F57 WKP35G via Metav Werkzeuge or consult their advisors for geometry-specific recommendations and delivery. MPMX080305-F57 WKP35G — Milling indexable insert for steel and cast iron (Tiger·tec Gold) by Walter Tools The MPMX080305-F57 WKP35G is a coated carbide milling insert engineered for high-productivity peripheral and slot milling of steel and cast iron components, offering stable cutting performance and long tool life. Tiger·tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron F57 chipbreaker for stable chip formation 11° relief and 0.5 mm corner radius Increased productivity through advanced coating and grade The combination of the Tiger·tec Gold multi-layer coating and the WKP35G carbide grade delivers a measurable improvement in durability and wear resistance under typical milling conditions. The coating reduces abrasive wear and lowers the risk of built-up edge, which translates into longer effective tool life and fewer insert changes per shift. The engineered grade is specifically matched to the thermal and mechanical demands of machining steel and cast iron, providing consistent cutting performance even when machining mixed batches or interrupted cuts. This stability supports shorter cycle times and higher process uptime. Consistent surface quality and secure geometry A defined 11° relief angle and a 0.5 mm corner radius give predictable engagement and edge strength, helping to maintain part finish across tool life. The insert's nominal size and 03 thickness deliver rigidity in the cutting zone, reducing vibration and improving the roughness of the machined surface. Thanks to the F57 chipbreaker geometry, chip formation remains controlled, which reduces the likelihood of recutting and minimises manual intervention at the machine. These geometry choices ensure repeatable, production-ready results with low scrap rates. Application range and machining behaviour explained Designed for the ISO P and K groups, the insert is suitable for a broad spectrum of unalloyed and alloyed steels as well as typical cast iron grades. The F57 chipformer is tuned to promote short, manageable chips in these materials, helping to avoid chip entanglement in deep slots or complex pockets. For users less familiar with coatings and grades: the term WKP35G denotes a coated carbide developed for balanced toughness and wear resistance, while Tiger·tec Gold refers to the coating technology that enhances thermal stability. These combined properties make the insert a versatile choice for mixed-production environments where material changes are frequent. Economic advantages and process security Using a coated insert with the described grade and chipbreaking features reduces downtime for insert changes and tool management, contributing to better overall equipment effectiveness (OEE). The reduced flank wear and improved edge stability lower the need for conservative feeds and cutting speeds, which in turn optimises throughput without sacrificing part quality. Backed by the reputation of Walter Tools, this insert supports reliable, repeatable machining and helps maintain planned production flow with fewer interruptions. For tailored selection advice, cutting-parameter recommendations or rapid supply of the MPMX080305-F57 WKP35G, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 — their advisors provide application-specific support and fast delivery options. Technical data SKU: MPMX080305-F57-WKP35G-WALTER Label: Fräswendeschneidplatte MPMX080305-F57 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert ISO designation: MPMX080305-F57 WKP35G Core specifications Relief angle: 11° Corner radius: 0.5 mm Insert size: 08 Insert thickness: 03 Tolerance class: M Chipbreaker: F57 Material application groups: P / K Designs & special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Execution: X Suitability: machining of steel and cast iron Series description: optimised for stable chip formation and broad material coverage FAQ What materials is this insert designed for? The MPMX080305-F57 WKP35G is specified for machining steel and cast iron (ISO groups P and K) and is engineered to handle the thermal and abrasive conditions common to these materials. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, which extends tool life and helps maintain edge integrity in continuous and interrupted milling. What role does the F57 chipbreaker play in operation? The F57 chipbreaker promotes controlled chip formation and breakage, reducing the chance of long, entangling chips and improving process reliability during slotting and peripheral milling. Which cutting geometry features support surface finish and edge strength? The 11° relief angle and the 0.5 mm corner radius combine to offer a balance between a sharp cutting edge for surface quality and sufficient edge strength to resist chipping under interrupted cuts. Is this insert compatible with standard milling toolholders? The insert follows typical indexable insert dimensions and ISO designation MPMX080305-F57 WKP35G; it is compatible with toolholders designed for this insert geometry and size. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered item is original, new stock from the manufacturer.
MPMX080305-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade combined with the F57 chipbreaker to ensure consistent, productive machining of steel and cast iron; order the insert via Metav Werkzeuge or consult our technical advisers for application-specific guidance. MPMX080305-F57 WKP35S indexable milling insert – Tiger·tec Silver, F57 chipbreaker | Walter Tools MPMX080305-F57 WKP35S is an indexable milling insert engineered for medium to heavy machining of steel and cast iron, offering a robust grade and chip control for productive milling operations. Tiger·tec Silver coating for high process security WKP35S grade for wear resistance on steel and cast iron F57 chipbreaker for controlled chip formation 11° relief angle and 0.5 mm corner radius for consistent finishes Optimised wear resistance and stable cutting performance The combination of Tiger·tec Silver coating and the WKP35S grade provides a clear advantage in resisting abrasive wear and maintaining a stable cutting edge during interrupted cuts. The coated carbide substrate reduces flank wear and extends tool life, which translates into fewer insert changes and more predictable tool-change cycles. This results in higher uptime and more consistent component tolerances when milling both unalloyed and alloyed steel as well as cast iron. Precise chip control for safer, more efficient milling With the engineered F57 chipbreaker and a modest corner radius of 0.5 mm, this insert promotes short, repeatable chip shapes that evacuate reliably in batch production and automated setups. The controlled chip formation reduces re-cutting of chips and protects the workpiece surface, improving overall process stability. The geometry, combined with an 11° relief angle, supports a balanced cut that is especially helpful when performing heavier radial depths or when encountering interrupted sections in cast components. Application-focused geometry for consistent surface quality The insert’s size designation and thickness deliver mechanical stability in the pocket, helping to prevent vibration and edge chipping during heavy engagement. The modest corner radius aids in achieving consistent surface finishes without compromising edge strength. For workshops seeking reproducible surface quality and reduced secondary finishing, this insert’s geometry and coating provide a direct benefit by lowering scrap rates and improving first-pass yields. For reliable results with the Tiger·tec Silver-coated inserts from Walter Tools, contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: MPMX080305-F57-WKP35S-WALTER Designation: MPMX080305-F57 WKP35S Product type: Indexable milling insert (milling insert) Brand: Walter Tools Core specifications Relief angle: 11° Corner radius: 0.5 mm Insert size: 08 Thickness: 3 mm Features & applicability Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F57 Material compatibility: Steel (P), Cast iron (K) Execution: X Tolerance class: M FAQ Which materials are suitable for this insert? The MPMX080305-F57 WKP35S indexable milling insert by Walter Tools is designed primarily for steel (P) and cast iron (K), matching the WKP35S grade and Tiger·tec Silver coating to these material groups. What benefit does the WKP35S grade bring to machining? WKP35S offers enhanced wear resistance and a stable cutting edge for the MPMX080305-F57 insert, which helps maintain tool life and consistent part quality in medium to heavy milling applications. How does the F57 chipbreaker affect production? The F57 chipbreaker on this Walter Tools milling insert produces short, controlled chips that improve evacuation and reduce the risk of chip re-cutting, supporting safer and more efficient automated milling. Is the insert geometry suitable for interrupted cuts? Yes, the combination of the insert’s geometry, 0.5 mm corner radius and 11° relief angle gives the MPMX080305-F57 WKP35S insert the edge stability and robustness needed for interrupted cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned manufacturers. The item offered is original, brand-new merchandise from the stated manufacturer.
MPMX080305-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating, precise geometry and reliable chip control to keep machining runs consistent and reduce tool-change downtime; order directly via Metav Werkzeuge or contact the technical team for application-specific advice. MPMX080305-F57 WPP35G indexable milling insert for steel — Tiger‑tec Gold (Walter Tools) The MPMX080305-F57 WPP35G is a coated carbide milling insert engineered for efficient steel machining in general milling applications, combining a Tiger‑tec Gold coating with an F57 chipbreaker for stable chip formation. Tiger‑tec Gold coated carbide for long tool life Optimised chip control with F57 chipbreaker 11° clearance angle for secure engagement 0.5 mm corner radius for versatile finishing Greater productivity through advanced coating and grade The Tiger‑tec Gold coating and the WPP35G grade provide a notable increase in wear resistance and thermal stability compared with uncoated grades. As a coated carbide insert developed for ISO‑P materials, it tolerates the typical heat and chip formation of steel machining and extends tool life, which reduces downtime for tool changes. The result is a measurable improvement in process economy and consistent part quality over longer production runs. Secure cutting engagement and improved surface results The combination of an 11° clearance angle and a 0.5 mm corner radius creates a balance between strength and finish capability. The relief angle reduces rubbing at the flank, while the small corner radius supports finer surface finish where required. The integrated F57 chipbreaker manages chip segmentation and evacuation, lowering the risk of re‑cutting swarf and improving machine spindle load stability—both important for repeatable geometry and predictable cycle times. Simple integration and application flexibility in steel machining Designed for ISO P (steel), this insert integrates easily into common milling toolholders and systems that accept the MPMX08 format. The Tiger‑tec Gold series is positioned as a versatile solution for a wide range of steel grades, delivering a compromise between wear resistance and toughness that suits mixed production. For complex component runs or new material batches, Metav Werkzeuge’s application engineering can provide cutting parameter recommendations and test cuts to accelerate process set‑up. Contact Metav Werkzeuge for a tailored recommendation on toolholder compatibility and cutting data for this Walter Tools insert, and request rapid advice for optimising the machining of specific steel grades. Technical Data SKU: MPMX080305-F57-WPP35G-WALTER Designation: MPMX080305-F57 WPP35G Product type: Indexable milling insert Facts Grade: WPP35G Series: Tiger‑tec Gold Clearance angle: 11° Corner radius: 0.5 mm Insert size: 08 Thickness: 03 Chipbreaker: F57 Tolerance class: M Special features Coating: Tiger‑tec Gold coated carbide Material application: Steel (ISO P) Execution: X FAQ What materials is this insert intended for? The MPMX080305-F57 WPP35G is designed primarily for steel machining and is classified for ISO P applications, making it suitable for unalloyed and alloyed steels. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WPP35G grade increases wear resistance and thermal stability during milling, which helps to extend tool life and maintain consistent surface quality. What benefits does the F57 chipbreaker provide? The F57 chipbreaker promotes controlled chip segmentation and evacuation, reducing the chance of entanglement and improving process stability during continuous milling operations. Can this insert be used for finishing as well as roughing? With a 0.5 mm corner radius, the insert is capable of producing acceptable finishes while retaining edge strength for light to moderate roughing; tool selection should consider required tolerances and surface specifications. Is the insert compatible with standard MPMX08 toolholders? The designation MPMX080305-F57 indicates compatibility with holders designed for the MPMX08 format; check holder specifications for seat and clamping requirements before assembly. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world‑leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com