P26310-14G11-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WSM37G grade for reliable machining of stainless steels and superalloys; the 14G11‑D61 chipbreaker supports stable chip formation and extended tool life. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. P26310-14G11-D61 WSM37G thread-cutting insert — Tiger‑tec Gold for stainless steels and superalloys by Walter Tools The P26310-14G11-D61 WSM37G is a thread-cutting insert engineered for demanding applications in corrosion-resistant and heat-resistant materials, offering reliable edge security and consistent results in production environments. Tiger‑tec Gold coating for longer tool life WSM37G grade for stainless steels and superalloys 14G11‑D61 chipbreaker for reliable chip control Designed for consistent thread quality Enhanced productivity for difficult-to-machine materials The Tiger‑tec Gold coating combined with the WSM37G grade is optimised for high thermal and mechanical stress, delivering consistent cutting performance in materials that challenge standard grades. This combination reduces wear progression and supports predictable tool-change intervals, which leads to higher machine uptime and improved throughput. Suitable for applications where material adhesion and heat build-up can shorten tool life, the grade is tailored to maintain a stable cutting edge and reduce the risk of built-up edge formation in stainless steels and high-temperature alloys. Predictable chip control and surface integrity The 14G11‑D61 chipbreaker geometry provides controlled chip fragmentation and evacuation during thread generation, lowering the likelihood of chip entanglement and workpiece damage. Stable chip formation contributes directly to improved surface finish and repeatability of thread profiles, reducing secondary rework. For shops wanting fewer process interruptions and less scrap, this geometry supports reliable metal removal rates and can aid in maintaining tight tolerances under continuous production loads. Application guidance and process integration Designed for ISO groups M and S, the insert covers stainless steels and heat-resistant superalloys as defined in ISO 513; the grade performs well where heat resistance and edge stability are decisive. The insert is especially suitable where repeated, reproducible thread quality is required across batches. When integrating into existing toolholders, confirm compatibility of seat and clamping dimensions; the insert’s chip control and coating technology are most effective when paired with appropriate feed rates and coolant strategies recommended for corrosion‑resistant and nickel‑based materials. Walter Tools engineering data may be consulted for cutting parameters to match specific alloys and thread geometries. For technical advice on the Walter Tools Tiger‑tec Gold thread-cutting insert and to check current availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: P26310-14G11-D61-WSM37G-WALTER Designation: P26310-14G11-D61 WSM37G Product type: Thread-cutting insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core data Grade: WSM37G Chipbreaker: 14G11‑D61 Material groups: S, M (ISO 513) SKU / UID: P26310-14G11-D61-WSM37G-WALTER Applications & features Coating technology: Tiger‑tec Gold Suitable for stainless steels (M) Suitable for superalloys and titanium (S) Indexable insert for thread cutting Optimised for stable chip formation and edge security FAQ What materials is this insert suitable for? The P26310-14G11-D61 WSM37G insert is designed for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S) where edge stability and thermal resistance are required. How does the Tiger‑tec Gold coating help performance? The Tiger‑tec Gold coating improves thermal and wear resistance, which extends the service life of the WSM37G grade and helps maintain consistent thread geometry under high thermal loads. Which chipbreaker should be selected for secure chip control? The integrated 14G11‑D61 chipbreaker on this insert is configured to produce predictable chip shapes and evacuation, reducing the risk of chip-related interruptions during thread cutting. Is this insert suitable for automated production lines? Yes, the combination of grade, coating and chipbreaker makes the insert well suited to high-repetition production environments where reproducible thread quality and longer tool life are priorities. Where can cutting parameters for this insert be obtained? Cutting data and parameter recommendations for the P26310-14G11-D61 WSM37G are available from Walter Tools technical documentation and are typically provided to match material grade and thread form. Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P26315R10 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S coated carbide grade for reliable wear resistance and predictable edge life in steel and cast iron milling; order directly via Metav Werkzeuge or consult our advisers for process-matched selection. P26315R10 WKP25S milling indexable insert, Tiger·tec Silver – Walter Tools The P26315R10 WKP25S is a coated milling indexable insert engineered for high-productivity machining of steel and cast iron. Tiger·tec Silver coating for wear resistance WKP25S coated carbide grade for edge stability Optimised for machining steel and cast iron Consistent process reliability in industrial milling Predictable tool life for continuous production The combination of Tiger·tec Silver technology and the WKP25S grade gives a balance of wear resistance and thermal stability that supports longer tool life and fewer unexpected interruptions. The coated carbide construction dampens the effects of temperature and abrasive wear typical when machining steel and cast iron, which means a more predictable replacement interval and reduced process variability. This reliability contributes directly to lower downtime and a steadier production output. Clear guidance for material selection and application Designed according to ISO material groups P (steel) and K (cast iron), the insert is tailored for the chip formation and heat conditions characteristic of these workpiece families. The specification P / K signals suitability for unalloyed and alloyed steels as well as abrasive cast materials, enabling informed selection when planning operations. For shops prioritising consistency, this means reduced trial-and-error and faster set-up to achieve the required surface finish and dimensional control. Coating technology explained for better performance decisions The Tiger·tec Silver coating is a multi-layered system applied to a coated carbide substrate to improve resistance against flank and crater wear while maintaining edge robustness. In practice, this results in stable cutting behaviour at elevated cutting speeds and under fluctuating loads. Understanding that the coating complements the substrate helps when choosing cutting parameters: higher speeds and controlled feed rates typically extend the effective service life of the insert without sacrificing component quality. Practical integration into milling processes The insert’s designation and geometry make it suitable for standard industrial milling toolholders; integration is straightforward when following toolholder manufacturer recommendations. The stable edge produced by the WKP25S grade supports consistent dimensional accuracy, which reduces rework and inspection effort. For production teams, this translates into simplified tool management and improved process capability metrics over a production run. For reliable, high-productivity milling with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for application advice or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: P26315R10-WKP25S-WALTER Name: P26315R10 WKP25S Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts No numerical specifications provided Special features Series: Tiger·tec Silver Grade: WKP25S Substrate: coated carbide Material suitability: steel and cast iron (ISO P / K) Base designation: P26315R10 ISO designation: P26315R10 WKP25S UID: P26315R10-WKP25S-WALTER FAQ What materials is this insert suitable for? The P26315R10 WKP25S insert is suitable for machining steel and cast iron, corresponding to ISO groups P and K. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP25S grade enhances wear resistance and thermal performance, improving edge life and stability during milling. How does the WKP25S grade affect process reliability? WKP25S offers a robust cutting edge on a coated carbide substrate, which supports consistent performance and reduced tool-change frequency in industrial milling. Can the insert be used at elevated cutting speeds? Yes, the combination of coated carbide and Tiger·tec Silver is designed to tolerate higher cutting speeds while maintaining predictable wear behaviour. How is the insert identified for ordering or tooling lists? Order and identify the item by the SKU P26315R10-WKP25S-WALTER or the ISO designation P26315R10 WKP25S Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Protected trademarks and trade names are the property of their respective owners. The brand Walter Tools is mentioned for identification purposes; there is no affiliation implied. The article offered is an original, brand-new product.
P26315R10 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating and the WKP35S grade: extended edge life, stable chip control and broad suitability for steel and cast iron enable steady, productive machining. Order the insert directly via Metav Werkzeuge or request technical advice from our consultants. P26315R10 WKP35S – Milling indexable insert, Tiger‑tec Silver for steel & cast iron | Walter Tools A P26315R10 WKP35S indexable insert engineered for high‑productivity milling of steel and cast iron, delivering consistent wear resistance and reliable chip behaviour for industrial machining. Tiger‑tec Silver coating for longer tool life WKP35S grade optimised for P/K applications Coated cemented carbide substrate for durability Designed for productive milling operations Reliable edge life for mixed steel and cast‑iron production The WKP35S grade is formulated to balance wear resistance and toughness for typical industrial turning and milling cycles, which translates into fewer tool changes and more consistent batch output. As a coated cemented carbide insert within the Tiger‑tec Silver series, the geometry and coating synergy reduce thermal impact during cutting and improve resistance to abrasive wear common in cast‑iron machining. This means less downtime for insert replacement and a more predictable tool schedule on the shop floor. Predictable chip control and improved surface consistency Optimised for machining groups P (steel) and K (cast iron), the insert’s design supports stable chip formation and evacuation under varying cutting conditions. The pairing of the grade with the coating improves edge stability, which helps maintain consistent surface finish across runs and reduces rework. For operations that demand repeatability, the insert’s behaviour under heat and abrasive loads provides clearer process windows and easier parameter transfer between machines. Easy integration into productive tool systems The insert format and ISO designation ensure compatibility with a wide range of milling cutter bodies and holders used in industrial workshops. The combination of Tiger‑tec Silver coating and the WKP35S substrate offers a pragmatic solution for mixed‑material production where quick changeover and tool reliability are paramount. Users can expect a favourable balance between cutting performance and insert life, supporting higher productivity without sacrificing process stability. Contact Metav Werkzeuge to specify the optimal P26315R10 WKP35S insert for the intended application or to receive tailored machining recommendations; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: P26315R10-WKP35S-WALTER Article designation: P26315R10 WKP35S Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Grade: WKP35S Material group: P / K (steel / cast iron) ISO designation: P26315R10 WKP35S UID: P26315R10-WKP35S-WALTER Special features Coating: Tiger‑tec Silver Substrate: Coated cemented carbide Application: Steel and cast iron machining Designed for productive milling operations FAQ Which materials are best machined with this insert? The P26315R10 WKP35S insert from Walter Tools is optimised for steel (P) and cast iron (K) applications and performs well where those material groups are predominant. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases resistance to thermal and abrasive wear, improving edge life and enabling steadier performance in both steel and cast‑iron cutting tasks. Is this insert compatible with standard milling holders? The ISO designation P26315R10 WKP35S ensures compatibility with commonly used milling cutter bodies that accept this insert format; confirm seat and clamp type for specific toolholders. How does WKP35S affect machining stability? WKP35S is tuned to offer a balance of toughness and wear resistance, which supports stable chip formation and consistent surface quality across production batches. Can this insert be used in high‑speed applications? The coated carbide and grade combination is suitable for demanding industrial milling; machining parameters should be selected according to machine capability and material to exploit the insert’s performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from the manufacturer.
P26315R10 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating, coated carbide grade and a balanced wear‑toughness profile for steady production performance; order directly via Metav Werkzeuge or consult our tooling specialists for integration advice. P26315R10 WPP35G – milling indexable insert, Tiger·tec Gold, for steel (Walter Tools) The P26315R10 WPP35G is a coated carbide milling indexable insert designed for efficient machining of steel, offering a combination of extended tool life and stable cutting behaviour in production environments. Tiger·tec Gold coating for extended tool life Coated carbide grade WPP35G for steel machining Balanced wear resistance and toughness Consistent cutting-edge performance in production Longer productive runs thanks to durable coating and material design The Tiger·tec Gold technology and the use of coated carbide provide a clear productivity advantage: the multilayer coating acts as a thermal and tribological barrier, slowing flank wear and reducing abrasive damage. This results in fewer tool changes and increased machine uptime, which translates into measurable savings on setup and non‑productive time. The insert’s construction supports consistent surface quality across batch runs and maintains cutting performance under variable cutting conditions. Optimised for steel with a balanced grade for everyday machining Specified for the ISO P group, this grade is tailored to the thermal and chip‑formation behaviour typical of steel machining. The WPP35G formulation aims to strike a compromise between wear resistance and toughness, making it suitable for a range of steel types—from general structural steels to harder alloyed grades encountered in production. That balance reduces the risk of premature chipping while maintaining abrasion resistance, so the component finish and dimensional consistency are preserved over longer tool life. Stable cutting edge and easy process integration for production setups A steady cutting edge simplifies process control: the technological focus of the insert delivers consistent cutting‑edge performance, which supports repeatable cycle times and predictable tool life. The design aligns with standard milling workflows, allowing smooth insertion into established tooling systems and reliable behaviour in continuous production. For customers seeking process security, the combination of grade and series provides a pragmatic route to reduce variability and improve overall throughput. For production‑oriented machining with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored tooling recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P26315R10-WPP35G-WALTER Article designation: P26315R10 WPP35G Product type: milling indexable insert Manufacturer: Walter Tools Facts Grade: WPP35G Series: Tiger·tec Gold Material group: P (steel) Product UID: P26315R10-WPP35G-WALTER Special features Coated carbide (coated cemented carbide) Optimised for steel machining (ISO P) Balanced wear resistance and toughness Designed for production and steady cutting performance FAQ Which materials is this insert suitable for? The P26315R10 WPP35G milling indexable insert from Walter Tools is specified for the ISO P group, i.e. primarily for machining steel. What does the WPP35G grade offer compared with other grades? WPP35G is a coated carbide grade in the Tiger·tec Gold series that balances wear resistance and toughness, making the insert suitable for a wide range of steel machining tasks where both life and edge stability are important. How does Tiger·tec Gold benefit production processes? Tiger·tec Gold coating enhances thermal stability and wear protection on the cutting zone, supporting longer tool life, fewer interruptions and consistent surface quality during extended production runs. Is this insert recommended for high‑volume milling? Yes, the design and grade of the P26315R10 WPP35G are aimed at supporting continuous production by delivering stable cutting‑edge performance and predictable tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group.
P26315R10 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a tough, versatile grading for efficient milling across steel, stainless and heat-resistant alloys — reliable edge stability and extended tool life help to reduce downtime. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. P26315R10 WSP45G — Milling indexable insert, Tiger·tec Gold, Walter Tools P26315R10 WSP45G is a milling indexable insert designed for versatile machining of steels, stainless steels and heat-resistant alloys in general milling applications Tiger·tec Gold coated carbide grade Suited for steel, stainless and superalloys Stable cutting edge for reliable milling Designed for versatile milling applications High-performance milling where stability matters The combination of a coated carbide substrate with the Tiger·tec Gold technology delivers noticeably improved process reliability in milling operations. Designed for dynamic chip formation typical of steels and stainless steels, this grade supports consistent cutting conditions and reduces the risk of built-up edge. For production environments that demand reproducible results, the insert’s formulation emphasises a stable cutting edge and predictable wear behaviour, which helps to maintain part tolerances and reduces rework. Versatility across challenging materials Engineered for the ISO groups P/M/S, the insert is suitable for unalloyed and alloyed steel, rostfreier Stahl (stainless steel) and heat-resistant superalloys or titanium. The grade’s toughness and PVD-type coating balance flank wear resistance and edge strength so that the same insert can be used for varied workpiece materials with fewer tool changes. This cross-material capability supports flexible production planning and simplifies tooling inventories in mixed-product workshops. Clear advantages for shopfloor productivity The coated grade’s wear resistance and chip control contribute to long tool life and steady surface finish quality in milling cycles. By minimising unexpected tool trips and providing a robust edge, the insert helps to keep cycle times stable and downtimes predictable. Where economic milling is required without sacrificing surface integrity, the grade offers a strong cost-to-performance ratio for medium- to high-volume operations. Practical selection and handling notes As an indexable milling insert, correct seat and clamping in the cutter body are important to exploit the grade’s potential; secure mounting ensures optimal heat dissipation and consistent chip evacuation. The insert’s adaptability to several material groups reduces the need for multiple specialised grades, making it a practical choice for job shops and production lines that require a single, reliable solution for a range of milling tasks. Contact Metav Werkzeuge for tailored application support and to specify the Walter Tools P26315R10 WSP45G Tiger·tec Gold insert for enhanced milling performance Technical Data SKU: P26315R10-WSP45G-WALTER Article designation: P26315R10 WSP45G Series: Tiger-tec Gold Grade: WSP45G Product type: Milling indexable insert Manufacturer: Walter Tools UID: P26315R10-WSP45G-WALTER Facts No core numerical cutting data supplied in the source Special features Coated carbide grade (Tiger·tec Gold) Material suitability: P / M / S Application: milling Robust edge stability and chip control FAQ What materials can this grade machine? The P26315R10 WSP45G insert is formulated for ISO groups P, M and S — suitable for steel, stainless steel and heat-resistant superalloys/titanium applications. Is the Tiger·tec Gold coating a PVD technology? Yes, the Tiger·tec Gold series represents a PVD/coating technology applied to a coated carbide substrate to improve wear resistance and edge stability. How does this insert support process reliability? The grade combines toughness with wear-resistant coating to reduce edge breakage and built-up edge, contributing to consistent machining results and fewer unexpected tool changes. Can the same insert be used across different workpieces in a small-batch shop? Yes, its versatility across P/M/S groups makes it suitable for mixed production where one robust grade is desirable to limit inventory and tool changeovers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is part of the Sandvik Group. Protected trademarks and brand names belong to their respective owners. Brand names and protected product names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
P26315R12 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from a high-performance grade that combines the Tiger-tec Silver coating with proven stability in chip formation for efficient milling of steel and cast iron; an economical choice that supports uninterrupted production and consistent surface quality — order through Metav Werkzeuge or consult the team for tailored advice. P26315R12 WKP35S Milling Indexable Insert by Walter Tools — Tiger-tec Silver coating for steel and cast iron The P26315R12 WKP35S is a coated carbide milling insert engineered by Walter Tools for productive machining of steel and cast iron, offering enhanced wear resistance and process stability in industrial milling applications. Tiger-tec Silver coating for extended tool life Optimised for steel and cast iron machining Reliable, stable chip formation under load Suitable for productive milling applications Longer tool life through a modern coating system The Tiger-tec Silver coating is a multi-layer, high-performance finish that raises the wear threshold of the cutting edge. By reducing abrasion and heat-induced degradation, the coating delivers longer tool life and fewer insert changes during batch runs. For operations that process ISO group P (steel) and K (cast iron), the result is measurable: fewer interruptions and improved overall equipment effectiveness. The term "coated carbide" refers to a hardmetal substrate with a specialised surface layer; this combination balances toughness and hardness for demanding milling tasks. Better process reliability and surface results Stable chip control and a robust cutting edge minimise vibration and reduce the risk of built-up edge, which translates into a consistently better surface finish and less rework. The grade WKP35S is formulated for the thermal and mechanical conditions typical when machining unalloyed and alloyed steels as well as abrasive cast irons. In practical terms, this means more predictable cycle times and a reduced need for corrective passes, supporting higher first-pass yields and leaner production workflows. Wide applicability with straightforward integration Designed as a milling indexable insert, this item fits common toolholders and can be implemented across a range of milling strategies, from roughing to semi-finishing where the geometry permits. The designation P26315R12 indicates the insert family and size series, while the WKP35S grade identifies the coated carbide composition developed for balanced wear resistance and toughness. The component is therefore suitable for diverse setups in small-batch job shops and larger production lines aiming for productive milling without extensive tool development. Economic efficiency and consistent performance Choosing a modern grade such as this supports process stability and predictable tool change intervals, which feed directly into cost-efficiency. The engineered combination of substrate and coating offers robust performance across materials in ISO groups P and K, delivering repeatable results and helping to maintain tight tolerances. For manufacturing contexts where uptime and consistent quality are priorities, the grade stands out as a dependable option that reduces downstream variability and contributes to continuous, high-quality output. Contact Metav Werkzeuge for a personalised recommendation on Walter Tools inserts with Tiger-tec Silver coating and for procurement support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P26315R12-WKP35S-WALTER Product: Milling indexable insert Manufacturer: Walter Tools Grade: WKP35S Series: Tiger-tec Silver Facts Applicable material groups: P (steel), K (cast iron) Material type: Coated carbide Designation: P26315R12 WKP35S Special features Coating: Tiger-tec Silver (multi-layer coated carbide) Main applications: Steel machining, Cast iron machining Proven for stable chip formation and enhanced wear resistance FAQ What materials can this insert machine effectively? The P26315R12 WKP35S insert is formulated for ISO group P (steel) and K (cast iron), making it suitable for unalloyed and alloyed steels as well as various cast irons. Is the WKP35S grade suitable for roughing and finishing? Yes, the WKP35S grade offers a balance between toughness and hardness that supports both productive roughing and semi-finishing operations, depending on tool geometry and cutting parameters. How does the Tiger-tec Silver coating affect performance? The Tiger-tec Silver coating increases wear resistance and thermal stability, which extends insert life and helps maintain consistent surface quality over longer cycles. Can this insert be used in standard milling holders? The insert follows common insert families and sizes (designation P26315R12), so it integrates with compatible milling tool systems designed for this insert form. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for clarification only. There is no affiliation between our company and the trademark owners; the offered article is an original, brand-new product from the manufacturer Walter Tools.
P26315R12 WPP35G WPP35G Wendeplatten - Walter Tools
High machining productivity and improved tool life result from the combination of the Tiger·tec Gold coating and the WPP35G grade, delivering stable chip formation in steel applications; order the P26315R12 WPP35G insert via Metav Werkzeuge or consult our specialists for process-specific recommendations. P26315R12 WPP35G indexable milling insert, Tiger·tec Gold coating – Walter Tools The P26315R12 WPP35G is an indexable milling insert engineered for productive steel machining with a coated carbide grade that balances wear resistance and toughness Tiger·tec Gold coated carbide for long tool life Optimised for steel machining and chip control Stable cutting edge for consistent surface finish Designed for productive, high-process security Increased output through a robust coating system The combination of the Tiger·tec Gold technology and the WPP35G grade provides a durable coated carbide that resists thermal and abrasive wear. This results in extended tool life and fewer index changes on the shopfloor, which directly raises throughput. The coating reduces friction at the cutting zone and helps maintain a stable cutting edge under the typical heat loads encountered when machining steel. For production planners, this translates into fewer interruptions and a more predictable tool-change schedule. Better surface finish and controlled chip behaviour A key advantage of this grade is improved chip control and consistent part quality. The insert's geometry and coating promote favourable chip breakage and evacuation, reducing the risk of re-cutting or part damage. For operators less familiar with cutting-material interactions: coated carbide comprises a cemented carbide substrate with a thin protective layer that enhances hardness and heat resistance. On components where surface integrity matters, the result is reduced secondary finishing and lower rework rates. Reliable integration and process security in series production Engineered for stability across a variety of steel types, this insert offers a compromise between wear resistance and toughness that suits mixed production runs. The WPP35G grade is intended for the P material group (per ISO 513), which covers unalloyed and alloyed steel, and is specified for productive machining where reliable performance is essential. Backed by Walter Tools’ development focus on consistent edge quality, the insert supports reproducible results and simplifies grade selection for manufacturing engineers. For machining requirements demanding Tiger·tec Gold performance and dependable process security, contact Metav Werkzeuge for tailored application advice and to order Walter Tools inserts; eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data SKU: P26315R12-WPP35G-WALTER ISO designation: P26315R12 WPP35G Product type: Indexable milling insert Manufacturer: Walter Tools Core data Material group: P (steel) Grade: WPP35G Series: Tiger·tec Gold Features Coating: Tiger·tec Gold (coated carbide) Suitable for: Steel Typical properties: balanced wear resistance and toughness Application focus: productive milling with stable chip formation FAQ Which materials is this insert suitable for? The P26315R12 WPP35G insert is specified for the P material group and is intended primarily for machining various types of steel. What does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances the coated carbide substrate of the P26315R12 WPP35G, improving thermal resistance and wear performance for longer cutting life. Is this grade suitable for mixed roughing and finishing operations? The WPP35G grade is designed to balance wear resistance and toughness, making the insert appropriate for a range of productive milling tasks in steel, including mixed roughing and semi-finishing. How does the insert support process security in production? By offering consistent edge stability and reliable chip control, the P26315R12 WPP35G insert reduces variability and contributes to repeatable machining results. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26315R12 WSP45G WSP45G Wendeplatten - Walter Tools Technische Daten: - coating: Tiger-tec Gold (PVD-beschichtetes Hartmetall) - material: P / M / S - stahl_material_anwendung: ja - rostfreier_stahl_material_anwendung: ja
Die robuste Kombination aus Tiger·tec Gold Beschichtung und einer verschleißfesten Hartmetallbasis sorgt für langlebige Werkzeugeinsätze bei anspruchsvollen Fräsaufgaben. Durch die breite Werkstoffabdeckung (Stahl, rostfreier Stahl, Superlegierungen/Titan) reduziert sich die Notwendigkeit häufiger Werkzeugwechsel. Bestellen Sie den Einsatz direkt über Metav Werkzeuge oder lassen Sie sich von den technischen Beratern gezielt beraten. P26315R12 WSP45G milling insert — Tiger·tec Gold PVD for Stahl, rostfreier Stahl and superalloys | Walter Tools The P26315R12 WSP45G is a coated milling insert designed for versatile, high-performance milling in demanding industrial applications Tiger·tec Gold PVD coating for edge life Broad material range: Stahl to superalloys Robust carbide substrate for stable cutting Optimised for milling productivity Durable coating for consistent cycles and longer tool life The insert features the Tiger·tec Gold technology, a PVD-coated solution engineered to combine thermal resistance with low adhesive tendency. This PVD-coated surface reduces flank wear and delays the onset of catastrophic edge failure, which translates into longer tool life and fewer indexings. For production environments this means steadier cycle times and a reduced frequency of tool handling, supporting more predictable machining processes and lower overall tooling consumption. Wide material compatibility to simplify tool inventory Designed for the material groups P / M / S, the insert covers unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant alloys such as nickel-based superalloys and Titan. The versatile grade reduces the need for multiple specialised inserts and enables a single tool geometry to cope with mixed production lots. As a result, set-up complexity decreases and throughput can be improved without sacrificing surface quality or process stability. Stable cutting edge for secure chip formation and accuracy A robust cemented carbide substrate underpins the coated layer, delivering mechanical strength and resistance against chipping under interrupted cuts. The combination of a stable substrate and the tailored coating supports reliable chip breaking and consistent cutting-edge performance. This reduces the risk of built-up edge and helps maintain dimensional accuracy, particularly in medium to heavy milling operations where edge robustness is critical. Practical advantages for shop-floor productivity The grade’s orientation towards milling applications yields tangible process benefits: fewer tool changes, dependable surface finishes and improved overall equipment effectiveness. The insert’s specifications make it suitable for manufacturers seeking to balance performance with cost efficiency, where predictable tool life and broad applicability contribute to a more streamlined production workflow while maintaining machining quality. For reliable milling performance with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for ordering or technical advice — Metav Werkzeuge provides application support and quick delivery options. Technical data SKU: P26315R12-WSP45G-WALTER Product reference: P26315R12 WSP45G Product type: milling insert Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Core specifications Coating: Tiger·tec Gold (PVD) Substrate: cemented carbide (coated) Material groups: P / M / S Application: milling Materials & special features Suitable for: Stahl; rostfreier Stahl; superalloys; Titan Sort: WSP45G Designed for stable chip formation and edge security Application focus: versatile milling tasks FAQ Is this insert suitable for stainless steel machining? Yes. The P26315R12 WSP45G insert from Walter Tools is formulated for rostfreier Stahl (material group M) and supports secure chip formation and good edge life in stainless applications. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating enhances thermal resistance and reduces adhesive wear on the cutting edge, which leads to longer service life and more consistent component surfaces when milling. Can the insert handle high-temperature alloys such as Inconel? The grade WSP45G is rated for material group S and is suitable for many heat-resistant superalloys; it provides improved edge stability under the thermal load typical for these materials. How does this insert improve shop-floor efficiency? By combining broad material compatibility with a durable carbide substrate and Tiger·tec Gold coating, the insert reduces tool changes and supports predictable cycle times, contributing to smoother production flows. Is the insert compatible with standard milling cutters? The P26315R12 WSP45G is a standard-format milling insert designed for common milling toolholders; compatibility should be checked against the cutter’s insert seat and clamping system. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not imply any association between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
P26315R15 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WKP35S grade for consistent chip control and extended tool life; the result is reliable, productive machining of steel and cast iron. Order directly via Metav Werkzeuge or consult our team for application-specific recommendations. P26315R15 WKP35S Milling insert – Tiger‑tec Silver for steel and cast iron (Walter Tools) A P26315R15 WKP35S milling insert engineered for high‑productivity roughing and finishing operations in steel and cast iron, offering a robust coated carbide grade from Walter Tools. Tiger‑tec Silver coating for longer tool life Optimised for steel and cast iron machining Coated carbide grade WKP35S for stability Consistent chip control and process security Increase productivity with stable cutting performance The Tiger‑tec Silver coating combined with the WKP35S grade provides a balance of wear resistance and toughness that supports sustained high‑rate machining. This combination reduces the frequency of indexable insert changes and minimises unplanned downtime, translating technical performance into measurable efficiency gains on the shop floor. The insert geometry contributes to a stable cutting edge, improving surface finish and reducing the risk of premature edge chipping during demanding operations. Clear application benefits for common materials Designed for the ISO groups P and K, the insert is specifically adapted to the thermal and chip‑forming behaviour of steel and the abrasive, often fragmented chips of cast iron. Explaining the ISO codes: group P denotes suitability for unalloyed and alloyed steels, whereas group K indicates optimisation for cast iron. Using a cutting grade tailored to these material classes ensures predictable chip formation and consistent cycle times, supporting reliable process planning and easier machining parameter selection. Coating and grade explained for robust economy The coated carbide construction offers a wear‑resistant surface while retaining the toughness required for interrupted cuts and variable chip loads. The coated carbide structure resists abrasive wear common in cast iron and manages heat build‑up typical when machining steels. The result is extended tool life and more predictable replacement intervals, which reduces tooling cost per part and supports stable production quality. For jobs where reproducibility and process security matter, the insert’s behaviour makes it a sound choice for serial and batch production. For tailored advice on integrating the Tiger‑tec Silver WKP35S inserts into production tools, contact Metav Werkzeuge for application support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: P26315R15-WKP35S-WALTER Designation: P26315R15 WKP35S Type: Fräswendeschneidplatte Grade: WKP35S Series: Tiger‑tec Silver Material groups: P / K Manufacturer: Walter Tools Facts ISO material groups: P, K Coating technology: Tiger‑tec Silver Application: steel and cast iron Insert form: indexable milling insert Special features Coated carbide construction Optimised chip control Stable cutting edge for interrupted cuts Suited to roughing and finishing strategies FAQ What materials is the insert suitable for? The insert is designed for machining steel and cast iron, corresponding to ISO groups P and K; the WKP35S grade is tuned to these material behaviours. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating improves wear resistance and heat management, extending insert life and improving consistency in machining performance. Is this insert suitable for interrupted cuts? Yes, the coated carbide grade and stable cutting edge make this insert appropriate for intermittent engagements commonly encountered in milling operations. Will the insert fit standard milling toolholders? The P26315R15 WKP35S is an indexable milling insert designed for compatible toolholder systems; confirm the toolholder seat and clamp style match the insert designation. Can this insert improve surface finish? Its combination of grade and geometry promotes controlled chip flow and a stable cutting edge, which helps achieve improved surface quality in many steel and cast iron applications. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26315R15 WPP35G Wendeplatten - Walter Tools
Take advantage of a coated carbide solution that combines the productivity of the Tiger·tec Gold series with clear suitability for machining steel, giving long tool life and stable chip formation; order directly via Metav Werkzeuge or consult our specialists for process integration. P26315R15 WPP35G milling indexable insert — Tiger·tec Gold, for steel, Walter Tools The P26315R15 WPP35G is a coated carbide indexable insert designed for efficient milling of steel, offering a balance of wear resistance and toughness within the Tiger·tec Gold family. High-performance WPP35G grade Tiger·tec Gold coating technology Optimised for machining steel Stable chip formation and long tool life Efficient milling through a balanced coated grade The coated carbide construction from the Tiger·tec Gold series delivers a reliable combination of hardness and toughness, developed for the thermal and mechanical conditions of steel machining. By favouring stable chip formation and reduced flank wear, this insert helps maintain cutting-edge integrity over longer cycles. The result is fewer tool changes and more consistent cycle times, which supports improved throughput in repetitive milling operations while simplifying process planning. Predictable process reliability and consistent surface finish Thanks to the grade's design for steel, users can expect enhanced process reliability and repeatable results across batches. The coating technology reduces built-up edge and improves heat resistance, which leads to a more consistent surface quality on finished components. For production environments where dimensional accuracy and repeatable surface characteristics matter, the combination of substrate and coating lowers the risk of scrap and rework. Versatile performance across common steel applications The WPP35G grade covers a broad practical range within steel machining, combining wear-resistant and tougher properties in one solution. Classified across usage bands (wear-resistant to tougher applications), this insert is suitable for a variety of operations from general-purpose facing to more demanding interrupted cuts in unalloyed and alloyed steels. Maintaining a smaller tool inventory while addressing multiple application demands reduces logistics overhead and supports more flexible job scheduling. For milling tasks that demand consistent performance from Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for availability and application advice — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical data Article number: P26315R15-WPP35G-WALTER Designation: P26315R15 WPP35G Product type: Milling indexable insert Brand: Walter Tools Facts Suitability classes: 10, 20, 30/35 Special features Coating technology: Tiger·tec Gold Grade: WPP35G (coated cemented carbide) Material code: P (suitable for steel) Typical applications: milling of unalloyed and alloyed steels Series: Tiger-tec Gold FAQ What materials is this insert suitable for? The P26315R15 WPP35G insert is designed primarily for machining steel; the grade and coating are optimised for the heat and chip characteristics typical of steel cutting. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold coating enhances wear resistance and heat stability, which contributes to longer tool life and more consistent surface finish when milling steel with the Walter Tools insert. Is this insert suitable for interrupted cuts or heavy roughing? The WPP35G grade balances wear resistance and toughness, making the insert capable of handling a range of conditions including many interrupted cuts and robust finishing operations in steel. Can this grade reduce the required tool inventory? Yes — the versatile performance range of the WPP35G grade allows consolidation of inserts for multiple steel applications, which simplifies stock management and planning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and do not indicate any association with our company. The offered item is an original, factory-new product from Walter Tools.
P26315R15 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold durability, versatile applicability to steel, stainless steel and superalloys, and a stable cutting edge for reliable milling performance; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. P26315R15 WSP45G milling insert (Tiger‑tec Gold) — Walter Tools The P26315R15 WSP45G is a coated milling insert engineered for high-demand milling of steel, stainless steel and heat‑resistant superalloys in industrial machining applications. Tiger‑tec Gold PVD-coated grade WSP45G Suitable for steel, stainless and superalloys Stable cutting edge for milling operations Versatile coated carbide for high productivity Predictable tool life and measurable process gains The combination of a PVD-coated wear-resistant substrate and the Tiger‑tec Gold technology ensures a measurable increase in edge life and process stability. The coating system supports temperature resistance and reduced flank wear, which results in longer intervals between indexings or insert changes. For manufacturers seeking to improve machine uptime, this insert offers a clear productivity argument: reduced tool changes and consistent component quality under regular milling feeds and speeds. The design focuses on reproducible chip control and stable cutting edge performance, translating directly into lower unit processing times and improved throughput. Reliable performance across ISO groups P, M and S This grade is optimised for the ISO material groups P (steel), M (stainless steel) and S (heat‑resistant superalloys / titanium). Each group presents distinct challenges — from the thermal and chip-formation demands of carbon and alloyed steels, to the tendency of stainless steels to work‑harden, and the poor thermal conductivity and edge loading of superalloys. The coating and substrate pairing in this insert are balanced to offer secure chip control and edge stability across these conditions. For operations working with mixed batches or frequent material changeovers, the insert reduces the need for multiple dedicated grades and simplifies tool inventory. Process advantages and handling benefits for production Beyond the metallurgical advantages, the insert supports pragmatic workshop needs: reduced downtime for tool handling, straightforward indexability and consistent surface finish. The combination of a robust cutting geometry and a coated carbide substrate is aimed at maintaining a reliable cutting edge under interrupted cuts and variable engagement, typical in pocketing and face milling. These characteristics help to lower scrap rates and improve reproducibility of batch parts. Where finishing requirements are stringent, the improved wear behaviour sustains a better surface quality over longer tool life, reducing rework and inspection effort. Practical application guidance and selection hints When specifying insert grades for a production cell, consider the balance between feed rate, depth of cut and expected component surface finish. The P26315R15 WSP45G insert is particularly suitable where a compromise between wear resistance and toughness is required, for instance in mixed steel workpieces or where occasional titanium alloys appear in production mixes. For new setups, pairing the insert with suitable toolholders and verified cutting data will yield the best results; trial runs under controlled parameters will confirm the optimal combination of speed and feed for the desired balance of life and finish. Contact Metav Werkzeuge for technical guidance on integrating Walter Tools Tiger‑tec Gold inserts into specific machining processes, including availability and suggested cutting data via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: P26315R15-WSP45G-WALTER Item: Fräswendeschneidplatte P26315R15 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core specifications Series: Tiger‑tec Gold Grade: WSP45G ISO designation: P26315R15 WSP45G Material classification: P / M / S Materials & features Coating: Tiger‑tec Gold (PVD), coated carbide Suitable for: Steel, rostfreier Stahl, heat‑resistant superalloys and titanium Application focus: Milling operations, stable chip control, robust cutting edge FAQ What materials is the P26315R15 WSP45G insert suitable for? The P26315R15 WSP45G from Walter Tools is designed for ISO groups P (steel), M (stainless steel) and S (superalloys/titanium), offering balanced wear resistance and edge stability across these materials. How does the Tiger‑tec Gold coating benefit milling operations? The Tiger‑tec Gold PVD coating on this insert reduces flank wear and improves temperature resistance, which helps to extend insert life and maintain consistent surface quality during milling. Can this insert be used for roughing and finishing? The insert's combination of toughness and wear resistance makes it suitable for both roughing and medium finishing applications, depending on the chosen cutting parameters and toolholder rigidity. Is the P26315R15 WSP45G a good choice for mixed‑material production runs? Yes, the grade's versatility across P, M and S groups simplifies tooling in mixed‑material workflows, reducing the need for frequent grade changes and supporting consistent process results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is part of the Sandvik group and is one of the world’s leading manufacturers of precision metal‑cutting tools. Protected trademarks and product names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers.
P26315R16 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP25S grade and proven stability in chip formation for uninterrupted milling of steel and cast iron. Order the P26315R16 WKP25S insert directly via Metav Werkzeuge or ask the consultants for application guidance. P26315R16 WKP25S — Fräswendeschneidplatte, coated carbide for steel and cast iron by Walter Tools The P26315R16 WKP25S is a coated carbide milling insert designed for productive metal removal in steel and cast iron applications, delivering reliable tool life and consistent chip behaviour in industrial milling operations. Tiger·tec Silver coated carbide for wear resistance Optimised for machining steel and cast iron Stable chip control for consistent surface finish Suitable for productive milling operations Boosted productivity with advanced coating technology The insert benefits from Tiger·tec Silver coating and the WKP25S carbide grade, which together provide improved wear resistance and edge stability under typical milling loads. This technical combination reduces unscheduled stoppages and allows longer cutting intervals, supporting higher throughput on production lines. For business users, the result is a tangible improvement in cycle reliability and a lower frequency of index changes, which contributes to a more economical machining process. Reliable machining across ISO P and K material groups Specified for material groups P (steel) and K (cast iron), the geometry and grade are adapted to the chip types and thermal conditions encountered when cutting these materials. The insert’s profile balances shear and fracture mechanisms to maintain dimensional control and to produce a reproducible surface finish. For operations where mixed batch machining is common, this insert simplifies tooling decisions while ensuring process stability across different workpiece materials. Lower rework through controlled chip formation and edge life The plate’s design emphasises stable chip control, which reduces the incidence of built-up edge and irregular chip breakage that can damage surfaces or tools. The coating and substrate combination extend usable edge life and maintain cutting performance under varying cutting speeds. For teams that measure success by consistent quality and minimal rework, the maintained edge integrity translates directly into fewer scrapped parts and more predictable tool change intervals. Seamless integration into machining processes and support options The insert fits into standard milling routines and is suitable for productive setups where repeatability matters. When process parameters require optimisation, selection of the WKP25S grade offers a solid starting point for cutting-speed and feed-rate tuning. For further application support and cutting data tailored to specific machine-tool combinations, Metav Werkzeuge can supply detailed recommendations and practical setup advice to accelerate process qualification. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger·tec Silver inserts or to discuss the best grade for specific steel and cast iron tasks. Technical Data SKU: P26315R16-WKP25S-WALTER Article: Fräswendeschneidplatte P26315R16 WKP25S Walter Tools Brand: Walter Tools Series: Tiger-tec Silver Grade: WKP25S Core Data Material groups: P (steel), K (cast iron) Coating technology: Tiger·tec Silver Special features Coated carbide construction High wear resistance Stable chip formation Optimised for productive milling FAQ What materials is this insert suitable for? The P26315R16 WKP25S insert is suitable for ISO material groups P (steel) and K (cast iron), offering compatibility with a wide range of unalloyed, alloyed steels and typical cast materials. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on this Walter Tools insert improves wear resistance and edge stability, which helps to extend tool life and maintain cutting performance during continuous milling operations. Is this insert intended for finishing or roughing operations? The combination of grade and geometry provides a balance between durability and surface integrity, making it appropriate for both productive roughing and general finishing passes depending on cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26315R16 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating, the WKP35S carbide grade and proven suitability for steel and cast iron to maintain stable, productive milling operations. Order the insert directly via Metav Werkzeuge or consult the team for application advice. P26315R16 WKP35S milling insert (Tiger·tec Silver) by Walter Tools A P26315R16 WKP35S milling insert engineered for high-performance machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating for extended tool life WKP35S coated carbide grade Suited for steel and cast iron machining Consistent chip control and edge stability Optimised coating for longer service life and predictable output The combination of the Tiger·tec Silver coating and the WKP35S grade provides a measurable improvement in wear resistance and heat management during milling. The advanced coating reduces flank and crater wear under the thermal loads typical of steel machining, which leads to longer tool life and fewer interruptions for indexable insert changes. For production environments where uptime and repeatability matter, the coating’s thermal barrier properties contribute directly to a more consistent surface finish and reduced rework. Reliable performance on steel and cast iron — fewer rejects, stable process Designed for the ISO P and K groups, the insert is configured to handle the specific chip behaviour and abrasive wear presented by steel and cast iron. The grade’s substrate and coating combination supports controlled chip formation and fracture where needed, lowering the risk of built-up edge and unexpected flank wear. This results in improved process reliability, particularly in mixed-batch production where material changes can otherwise increase scrap rates and machine downtime. Edge stability and chip control for predictable machining results A focus on edge robustness and optimised chip control means the insert delivers repeatable geometrical accuracy across tool life. The cutting edge geometry, together with the coating characteristics, promotes effective evacuation of chips and reduces vibration tendencies during interrupted cuts. The outcome is stable edge performance, more consistent dimensional accuracy and reduced manual inspection time on the shop floor. Practical handling and application advice for workshop integration The insert’s ISO designation and clear material assignments simplify tooling decisions for engineers and buyers working in metalcutting operations. When selecting cutting parameters, the WKP35S grade performs best with cutting speeds and feeds aligned to typical steel and cast iron recommendations; modest increases in cutting speed are feasible where coolant and machine rigidity permit, thanks to the coating’s heat resistance. For specific cycle optimisation or to match machine capabilities, Metav Werkzeuge’s consultants can provide tailored guidance. For application support or ordering, contact Metav Werkzeuge for precise recommendations and delivery coordination Technical data SKU: P26315R16-WKP35S-WALTER Article designation: P26315R16 WKP35S Product type: milling insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Substrate / classification: P / K (coated carbide) Facts No numerical specifications provided in the source data Special features Coating: Tiger·tec Silver Coated carbide grade WKP35S Applications: Steel (P) and cast iron (K) Conforms to ISO 513 material group designations Designed for consistent chip control and edge stability FAQ What materials is this insert suitable for? The P26315R16 WKP35S milling insert (Walter Tools) is suitable for ISO P (steel) and ISO K (cast iron) material groups. Which coating and grade does the insert use? The insert uses the Tiger·tec Silver coating and the WKP35S coated carbide grade for enhanced wear resistance and heat management. Is the insert intended for high-speed machining? The combination of coating and grade supports robust performance; cutting speed suitability depends on machine rigidity, coolant and process parameters specific to the application. How does the insert support chip control? The insert’s grade and edge configuration promote consistent chip formation and evacuation, reducing the risk of built-up edge and improving surface finish. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The mention of brand names serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the referenced manufacturers.
P26315R16 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, balanced toughness and proven chip control to keep milling processes productive; order directly via Metav Werkzeuge or consult the Metav advisers for application-specific recommendations. P26315R16 WPP35G milling indexable insert for steel — Tiger·tec Gold grade, Walter Tools A P26315R16 WPP35G milling indexable insert engineered for versatile steel machining, offering a coated-carbide grade that balances wear resistance and toughness for reliable milling performance High wear resistance with Tiger·tec Gold coating Optimised for steel machining (ISO P) Balanced toughness for stable chip control Consistent performance in productive milling Longer tool life through a coated-carbide system The insert from the Tiger·tec Gold series combines a WPP35G grade with a coated-carbide substrate to deliver pronounced wear resistance during continuous machining. The coating reduces flank wear and thermal loading at the cutting edge, which directly extends tool life and reduces tool-change frequency. For production environments this translates into fewer interruptions and improved machine utilisation; the insert’s metallurgical design supports consistent edge integrity even under typical steel cutting temperatures. Improved process stability and surface quality Designed for machining ISO P materials, the geometry and grade emphasise controlled chip control and a robust cutting edge. Stable chip formation lowers the risk of built-up edge and minimises vibration, so the operator achieves a more consistent surface finish with each pass. Explaining the technology: the coating acts as a thermal barrier and reduces friction at the rake face, while the substrate provides the underlying toughness required for interrupted cuts. The result is a repeatable milling routine that supports higher overall productivity. Application focus and process advice for reliable results The P26315R16 insert is suited to a range of steel grades where a compromise between hardness resistance and toughness is needed. In mixed production batches the grade’s attributes help when tool paths include roughing and semi-finishing sequences without frequent tool swaps. For mounting, standard indexable milling toolholders that accept this insert designation are appropriate; tool selection should match intended depths of cut and feed rates to preserve edge life. For complex material mixes or specialised cutter geometries, consultation on insert orientation and clamping is recommended to ensure process security. Contact Metav Werkzeuge to discuss the right insert geometry and ordering options for Walter Tools Tiger·tec Gold grades — Metav’s consultants provide tailored recommendations for steel milling applications. Technical Data SKU: P26315R16-WPP35G-WALTER Article number: P26315R16 Manufacturer: Walter Tools Facts Material group: P (ISO P — steel) Grade: WPP35G Series: Tiger·tec Gold Special features Coating: coated carbide Application: Steel machining (ISO P) Design focus: wear resistance and toughness balance Series characteristics: productive milling, optimised chip control FAQ Which materials is this insert intended for? The P26315R16 WPP35G insert is specified for ISO P materials, i.e. unalloyed and alloyed steels, and is optimised for those machining conditions. What advantages does the Tiger·tec Gold coating offer? Tiger·tec Gold provides thermal stability and reduced friction at the cutting edge, improving wear resistance and contributing to longer tool life for the WPP35G grade. Is this insert suitable for both roughing and finishing? Yes, the grade and geometry are balanced to perform across roughing and semi-finishing operations in steel, offering a compromise between durability and edge toughness. How does WPP35G compare to more wear-focused grades? WPP35G offers a combination of wear resistance and toughness; it is less brittle than extreme wear-focused grades and therefore better suited where interrupted cuts or variable conditions occur. Will the insert work in standard indexable milling holders? The insert matches common indexable milling systems that accept this designation; verification of seat type and clamping method is advised for secure mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
P26315R16 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for reliable, versatile milling of steels, stainless steels and heat‑resistant alloys; the combination supports stable chip formation and extended edge life. Order directly via Metav Werkzeuge or consult the team for application guidance. P26315R16 WSP45G — milling insert, Tiger·tec Gold PVD, suitable for P/M/S materials by Walter Tools The P26315R16 WSP45G is a coated milling insert designed for versatile cutting in steel, stainless steel and heat‑resistant superalloys, optimised for stable machining in demanding production environments Tiger·tec Gold PVD coating Suitable for P/M/S materials High edge stability in milling Consistent milling performance for industrial production The Tiger·tec Gold coating, applied to a coated carbide substrate, delivers a predictable performance curve across medium to high cutting speeds. As a milling insert, this grade focuses on repeatable chip formation and reduced flank wear, which helps to keep cycle times constant and rework rates low. The construction is intended for industrial milling operations where surface finish and dimensional stability matter; explaining the coating as a thin, hard PVD layer clarifies why heat and abrasion resistance are improved. Controlled machining of challenging materials Designed for the P/M/S material groups, the insert handles unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys including titanium. The P/M/S designation indicates tailored performance: the grade compensates for the different heat generation and chip behaviour of each group. For stainless steels the focus is on avoiding build‑up edge and securing chip evacuation; for superalloys the priority is thermal stability and preserving the cutting edge under high temperatures, resulting in fewer tool changes and steadier throughput. Longer service life and secure process results The WSP45G chemistry emphasises toughness and edge retention, supporting a balance between wear resistance and chipping resistance. Improved edge stability extends service intervals and contributes to overall process security on milling centres. In practice, this means fewer interruptions for index changes and a lower risk of scrap due to sudden tool failure. The insert’s design is especially useful where reproducible cycle outcomes and predictable tool consumption are required for cost‑controlled production. For technical advice, availability checks or to request the Tiger·tec Gold P26315R16 WSP45G milling insert, contact Metav Werkzeuge for application support and ordering assistance Technical Data Article number: P26315R16-WSP45G-WALTER Designation: P26315R16 WSP45G Type: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WSP45G Coating technology: Tiger·tec Gold (PVD) Material groups: P (steel), M (stainless steel), S (superalloys/titanium) Special features Coated carbide construction Tough, versatile PVD grade optimised for milling Stable chip formation and good edge retention Suited for demanding production and mixed‑material runs FAQ Which materials can this milling insert machine reliably? The P26315R16 WSP45G insert from Walter Tools is rated for the P/M/S groups, meaning it machines steel, stainless steel and heat‑resistant superalloys including titanium with controlled chip formation. What does the Tiger·tec Gold coating provide? Tiger·tec Gold adds a PVD hard layer that increases abrasion resistance and thermal stability for the WSP45G grade, improving flank wear behaviour and contributing to longer service life in milling. Is the insert suitable for stainless steel finishing passes? Yes, the WSP45G grade is designed to manage the toughness and built‑up edge tendencies of stainless steel, supporting stable finishes when parameters are correctly applied. How does the WSP45G grade differ from uncoated alternatives? Compared with uncoated carbide, the WSP45G PVD coating enhances wear resistance and heat tolerance, reducing edge degradation and enabling more consistent cycle results in production milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the listed brands. The item offered is an original, brand‑new product of the manufacturer (Walter Tools).
P26315R19.05 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of coated carbide performance and the Tiger·tec Silver technology for consistent tool life and reliable chip control in steel and cast iron machining; order the insert directly via Metav Werkzeuge or ask the consultants for application-specific guidance. P26315R19.05 WKP35S milling insert — coated carbide for steel and cast iron (Walter Tools) A P26315R19.05 WKP35S milling insert engineered for productive, repeatable milling operations on steel and cast iron components. Tiger·tec Silver coating for extended life Optimised for steel and cast iron machining Coated carbide grade WKP35S for stability Consistent chip control and wear resistance Higher productivity through advanced Tiger·tec Silver coating The Tiger·tec Silver technology combines a robust coating with a wear-resistant substrate to deliver longer interval times between indexings and reduced tool-change downtime. This translates into measurable productivity gains in batch and continuous production. The WKP35S grade is a coated carbide developed to handle the thermal and mechanical stresses typical of machining P-class steels while maintaining a stable cutting edge; the result is smoother process behaviour and more predictable tool life. Where thermal load and abrasive wear are concerns, the coating reduces flank wear and helps preserve geometry for consistent dimensional quality. Reliable machining on steel and cast iron with optimised chip behaviour Designed for the ISO-designated material groups P (steel) and K (cast iron), the insert’s specification addresses the distinct chip formation and wear patterns of these families. For steels, the grade manages heat and long chips effectively; for cast iron, the formulation is tuned to resist abrasive wear and the short, breaking chips commonly encountered. The technical composition supports stable chip control, which lowers the risk of tool clogging and improves surface finish consistency. This makes the insert suitable for a wide range of production tasks where repeatability and component quality are priorities. Practical benefits for workshop integration and cost efficiency The standardised designation and format facilitate rapid integration into existing toolholders and indexable tool systems, reducing setup complexity. As part of the Tiger·tec Silver series, the insert contributes to lower overall tooling costs through longer service life and reliable performance across workpieces. Consistent cutting behaviour supports tighter process tolerances and reduces scrap rates, while the coated carbide construction maintains edge robustness under varying cutting conditions. The Walter Tools background in precision tooling underpins the product’s suitability for day-to-day industrial use, delivering both technical performance and process stability. For application advice or to secure P26315R19.05 WKP35S inserts from Walter Tools, contact Metav Werkzeuge for availability and tailored technical recommendations Technical data Article number: P26315R19.05-WKP35S-WALTER Designation: P26315R19.05 WKP35S Product type: milling insert Manufacturer: Walter Tools Facts No measurable data provided Special features Series: Tiger·tec Silver Grade/Sorte: WKP35S (coated carbide) Material suitability: P (steel), K (cast iron) Material of insert: coated hardmetal ISO designation: P26315R19.05 WKP35S FAQ What materials is this insert suitable for? The P26315R19.05 WKP35S insert is suitable for ISO groups P (steel) and K (cast iron), offering tailored wear resistance for both families. How does the Tiger·tec Silver series improve performance? Tiger·tec Silver combines a wear-resistant substrate with an engineered coating to extend interval times between indexings and improve edge stability under thermal stress. Is the WKP35S grade appropriate for high-production environments? Yes, the WKP35S coated carbide grade is designed for stable, repeatable performance, making it well suited to high-production milling where consistent tool life is required. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P26315R19.05 WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and WPP35G carbide grade to achieve longer tool life and stable chip control when machining steel; benefit from fewer tool changes and consistent process performance. Order the insert via Metav Werkzeuge or consult the technical team for application-specific recommendations. P26315R19.05 WPP35G milling indexable insert — coated carbide for steel (Walter Tools) P26315R19.05 WPP35G is a coated carbide milling insert designed for general steel machining, combining Tiger·tec Gold coating technology with a grade that balances wear resistance and toughness. Tiger·tec Gold coated carbide for long life Optimised for machining steel grades Balanced wear resistance and toughness Universally applicable for finishing and roughing Maximise uptime with a durable coated grade The P26315R19.05 WPP35G insert is built on a coated carbide substrate using Tiger·tec Gold technology, which is engineered to extend tool life under typical steel cutting conditions. The coating reduces abrasion and thermal wear, improving process stability and enabling longer intervals between indexings or replacements. For production environments where predictable performance and fewer interruptions are priorities, this grade supports continuous operation and helps to reduce unplanned downtime while maintaining surface quality on machined parts. Consistent performance across steel applications Classified for the ISO P group, the insert is particularly suited to unalloyed and alloyed steel, offering a compromise between hardness and toughness that makes it effective for a wide range of steels and cutting conditions. The material pairing and geometry promote controlled chip formation and heat management, which benefits both finishing and roughing operations. By choosing this grade, engineers can achieve repeatable results and improved cycle times through reduced tool wear and stable cutting behaviour, contributing directly to productivity gains on the shop floor. Simple selection and reliable process integration As a series member of Tiger·tec Gold, the insert simplifies tool selection for production planners seeking a robust solution for steel machining. The designation indicates compatibility with standard milling toolholders and common clamping systems, allowing straightforward integration into existing toolsets. Process planners will appreciate the clear material grouping and the balance of wear resistance and toughness when defining cutting data. For further advice on feeds, speeds and holder combinations, application specialists are available to assist. Contact Metav Werkzeuge for tailored application advice and availability of the Walter Tools P26315R19.05 WPP35G milling insert Technical data Article number: P26315R19.05-WPP35G-WALTER Designation: P26315R19.05 WPP35G Manufacturer: Walter Tools Tool type: Milling indexable insert Series: Tiger·tec Gold Core data Size reference: 19.05 Material group: P (steel) Coating technology: Tiger·tec Gold Special features Coated carbide grade WPP35G Optimised for steel machining Balanced wear resistance and toughness Promotes stable chip formation Suitable for finishing and roughing FAQ What steels is this insert suitable for? The P26315R19.05 WPP35G insert is specified for the ISO P group and is suitable for unalloyed and alloyed steels commonly encountered in production. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP35G grade reduces abrasive wear and improves thermal resistance, enhancing the insert's service life and maintaining consistent cutting performance. Can the insert be used for both finishing and roughing? Yes, the balanced properties of the WPP35G grade make it appropriate for a range of operations from finishing to more aggressive roughing in steel. Is the insert compatible with standard milling holders? The designation and form of the P26315R19.05 WPP35G are compatible with common milling toolholders; check holder specifications for seat and clamping compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P26315R20 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP25S carbide grade for reliable wear resistance and consistent chip control; these features combine to improve throughput and reduce tooling-related downtime. Order the insert directly via Metav Werkzeuge or consult the technical advisors for cutting-data recommendations. P26315R20 WKP25S milling indexable insert — Tiger·tec Silver, for steel and cast iron — Walter Tools P26315R20 WKP25S is a coated carbide milling insert optimised for general milling applications on steel and cast iron, offering stable cutting performance and good wear resistance. Tiger·tec Silver coating for enhanced wear resistance Coated carbide grade WKP25S for stable tool life Designed for steel and cast iron machining Consistent chip control and productive cutting Higher productivity through stable cutting performance The combination of the Tiger·tec Silver coating and the WKP25S grade delivers a consistent performance window that supports higher material removal rates and fewer unscheduled tool changes. The coated carbide surface enables the insert to withstand elevated cutting speeds while keeping dimensional tolerance tight, which reduces rework and improves overall process efficiency. This reliably predictable behaviour helps to maintain steady cycle times in serial production and supports cost-efficiency targets. Extended tool life through optimised wear resistance A specially engineered multilayer coating forms a thermal barrier and resists abrasive attack, which directly translates into longer tool life under industrial milling conditions. By reducing flank and crater wear the insert maintains a sharper cutting edge for longer, decreasing consumable spend and intervention frequency. Fewer tool changes and reduced dressing or regrinding deliver lower labour input and a smoother production flow, particularly in demanding mixed-material schedules. Versatile machining for steel and cast iron with clear ISO orientation Engineered for the ISO 513 material groups P (steel) and K (cast iron), the grade handles both continuous chips typical of steel and the short, brittle chips associated with cast iron. The insert geometry balances heat dissipation and chip formation to reduce the risk of edge build-up and ensure consistent surface quality. For operations that cycle between unalloyed/low-alloy steels and abrasive cast components, this versatility simplifies tooling choices and increases machine uptime. Predictable process control and straightforward integration Good chip behaviour and a stable cutting edge provide tangible process security: consistent chip control reduces the likelihood of tool breakage and supports improved surface finish with every pass. The insert integrates into standard milling toolholders without special adaptation, so setup and changeover remain quick. For shops seeking tailored feed and speed data or assistance with application-specific parameters, Metav Werkzeuge’s specialists can supply recommended cutting values and machining strategies to maximise performance. For dependable performance with Tiger·tec Silver, contact Metav Werkzeuge to secure the P26315R20 WKP25S insert and obtain application-specific cutting-data advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P26315R20-WKP25S-WALTER Name: Milling indexable insert P26315R20 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Applicable ISO groups: P / K Facts Grade: WKP25S Coating: Tiger·tec Silver Material indication: P / K Special features Suitable for steel (ISO P) Suitable for cast iron (ISO K) Coated carbide cutting grade Stable chip control for productive cutting FAQ What materials is the P26315R20 WKP25S suitable for? The P26315R20 WKP25S insert from Walter Tools is specified for ISO material groups P and K, meaning it is suitable for machining various steel grades and cast iron components. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the insert improves wear resistance and heat management, which preserves the cutting edge and extends service life in milling operations. Which milling tasks match this insert best? This coated indexable insert is suited to a broad range of milling operations where consistent chip control and stable cutting parameters are required, such as face milling and peripheral milling in mixed-production environments. How does the WKP25S grade affect operational costs? The WKP25S coated carbide grade reduces abrasive wear and prolongs tool life, which lowers tooling consumption and maintenance intervals, improving the overall cost per component. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered article is original, brand-new goods from Walter Tools.
P26315R20 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating, robust edge life and broad suitability for both steel and cast iron; this yields dependable machining performance and reduced downtime. Order the P26315R20 insert via Metav Werkzeuge or contact our consultants for application advice. P26315R20 P26315R20 WKP35S milling insert — Tiger‑tec Silver, suitable for steel and cast iron, Walter Tools A P26315R20 WKP35S milling insert engineered for productive external and face milling of steel and cast iron in industrial machining environments. Tiger‑tec Silver coating for longer tool life Optimised for steel (P) and cast iron (K) Stable cutting edge for consistent performance Walter Tools quality and process security Higher uptime through durable coated carbide technology The combination of a modern coated carbide substrate and the Tiger‑tec Silver coating delivers a measurable increase in service life and consistent cutting performance. This indexable insert is designed to resist the thermal and abrasive stresses typical when machining steel and cast iron, so process interruptions are reduced and tool change frequency falls. The coating improves wear resistance and adhesion, which in practice translates to fewer unexpected stops and a steadier production flow. Predictable chip formation and efficient material removal Developed with the behaviour of steels and cast irons in mind, the grade WKP35S supports reliable chip control and heat management. Where chip shape and evacuation are critical to cycle time and surface finish, the insert’s geometry and grade help maintain stable cutting conditions. For operations where repeatability and cycle consistency matter, the plate ensures efficient material removal and less rework, supporting a favourable cost-per-part ratio over longer production runs. Clear application range and compatibility with standard holders Specified for ISO groups P (steel) and K (cast iron), the insert is suitable for a wide range of unalloyed and alloyed steels as well as common cast materials. The designation P26315R20 WKP35S identifies the geometry and grade, enabling straightforward selection of compatible tool holders and cutter bodies. The standardized form allows integration into existing tooling systems without the need for bespoke fixtures, simplifying logistics and reducing set-up time. Technical reliability backed by a recognised brand Produced under the Walter Tools family, the insert benefits from process-focused development and quality assurance aimed at consistent performance in demanding shopfloor contexts. The material pairing and coating technology aim to deliver process security and predictable surface quality, making the insert a pragmatic choice for manufacturers seeking a balance between performance and operational reliability. Contact Metav Werkzeuge for tailored cutting data, availability and swift supply of Walter Tools P26315R20 WKP35S milling inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: P26315R20-WKP35S-WALTER Designation: P26315R20 WKP35S Product type: Milling insert Series: Tiger‑tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Material group suitability: P / K (steel / cast iron) UID: P26315R20-WKP35S-WALTER Label: Fräswendeschneidplatte P26315R20 WKP35S Walter Tools Special features Coating technology: Tiger‑tec Silver Substrate: coated carbide Main applications: machining of steel and cast iron Series characteristics: modern coating for improved wear resistance FAQ What materials is this insert designed for? The P26315R20 WKP35S insert is specified for steel (P) and cast iron (K) according to ISO designations, making it suitable for typical unalloyed and alloyed steels and a broad range of cast materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the P26315R20 WKP35S improves wear resistance and thermal stability, which extends edge life and supports consistent machining results over longer runs. Can the insert be used in standard milling cutters? Yes; the insert’s designation and geometry are compatible with standard cutter bodies designed for the corresponding insert style, enabling straightforward replacement and use in existing tooling systems. What performance benefits can be expected in production? Users report improved process stability, predictable chip formation and reduced tool change frequency when using the WKP35S grade in applications with steel and cast iron, contributing to higher overall productivity. Is this insert suitable for finishing operations? Depending on cutter geometry and machining parameters, the coated grade offers the surface quality and edge stability needed for many finishing tasks on steel and cast iron; selection of cutting data is critical for optimal results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. The mentioned brand names are used for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
P26315R20 WPP35G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with a robust coated carbide grade, this milling insert offers stable chip formation and extended tool life for productive steel machining. Order the P26315R20 WPP35G directly via Metav Werkzeuge or consult our specialists for machining advice. P26315R20 WPP35G milling insert by Walter Tools – Tiger‑tec Gold, for steel The P26315R20 WPP35G is a coated carbide milling insert from Walter Tools engineered for efficient, repeatable steel machining in high‑productivity environments. Tiger‑tec Gold coating for extended life Coated carbide grade optimised for steel Stable chip formation for productive cutting Designed for consistent surface quality Higher productivity through material and coating optimisation The combination of the Tiger‑tec Gold coating and a wear‑resistant coated carbide substrate provides a measurable improvement in tool life and process reliability. The ceramic‑rich coating reduces flank wear and protects the cutting edge at elevated temperatures, enabling longer uninterrupted cuts and fewer insert changes. For production shops this translates into reduced machine downtime and a better cost‑per‑component ratio. The insert’s construction is aimed specifically at the thermal and mechanical demands of machining steel, where controlled heat dissipation and edge stability are decisive for consistent throughput. Better chip control and surface finish with fewer rejects Thanks to its material geometry and coating chemistry, the insert delivers stable chip formation, which reduces edge build‑up and chatter. Stable chips minimise rework and support predictable tool performance across batch runs. The grade’s behaviour under load helps maintain a uniform cutting edge, resulting in improved surface quality on finished parts. For teams less familiar with insert metallurgy, “stable chip formation” means chips break reliably, clear from the cut, and avoid entanglement or workpiece damage—contributing to safer, more efficient machining cycles. Easy integration and application guidance for process security The insert is intended for general steel applications as indicated by its grade designation, and it suits a range of milling strategies from roughing to semi‑finishing when paired with appropriate cutter bodies. For process planning, selecting parameters that respect the coating’s heat tolerance and the carbide substrate’s strength will yield the best results: moderate to high cutting speeds, stable feeds, and sufficient coolant where applicable. Support is available for application setup and parameter tuning to ensure immediate productivity gains and repeatable performance across shifts. Contact Metav Werkzeuge today to discuss application parameters or request tailored recommendations for the Tiger‑tec Gold milling insert P26315R20 WPP35G — Metav Werkzeuge can advise on optimal feeds, speeds and holder compatibility. Technical specifications SKU: P26315R20-WPP35G-WALTER Product type: Fräswendeschneidplatte / milling insert ISO designation: P26315R20 WPP35G Grade: WPP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core data Material code: P (suitable for steel) Suitable for steel: yes Series/grade classification: coated carbide Special features Tiger‑tec Gold coating technology Coated carbide grade optimised for steel machining Stable chip formation for productive cutting Designed for improved tool life and process reliability FAQ What materials is this insert suited for? The P26315R20 WPP35G is specified for machining steel; the grade and Tiger‑tec Gold coating are tailored to the thermal and chip‑formation characteristics of steel. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the P26315R20 WPP35G increases wear resistance and edge stability, which prolongs tool life and supports longer uninterrupted machining cycles. Can this insert be used for finishing operations? Yes — when combined with appropriate cutter holders and tuned feeds/speeds, the insert supports semi‑finishing and finishing tasks while maintaining surface quality. Is special tooling required to use this insert? No special tooling is required beyond a compatible cutter body designed for the insert geometry; correct clamping and recommended cutting parameters ensure the expected performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarked names and product designations mentioned are the property of their respective owners and are used for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands beyond the distribution of original, factory‑new products. The offered article is an original, brand‑new part of the manufacturer.
P26315R20 WSP45G WSP45G Wendeplatten - Walter Tools
P26315R20 WSP45G Fräswendeschneidplatte von Walter Tools Die P26315R20 WSP45G Fräswendeschneidplatte ist eine beschichtete Hartmetallplatte der Tiger-tec Gold Baureihe, entwickelt für produktive Fräsanwendungen in Stahl, rostfreiem Stahl und hitzebeständigen Legierungen. Vielseitige Einsatzfähigkeit für Stahl, rostfrei und Superlegierungen Tiger-tec Gold Beschichtung für verbesserte Standzeit Optimierte Spanbildung bei Fräsprozessen Robuste Schneidkante für konstante Produktivität Effiziente Zerspanung und Prozesssicherheit mit hoher Standzeit Wendeschneidplatte WSP45G bietet durch die Tiger-tec Gold Beschichtung eine deutlich verbesserte Standzeit und Stabilität der Schneidkante. Gerade bei hoch beanspruchenden Fräsoperationen reduziert sich der Werkzeugwechsel, was Durchsatz und Maschinenauslastung erhöht. Nutzer profitieren von gleichmäßiger Verschleißentwicklung und planbaren Ausfallzeiten, was die Wirtschaftlichkeit des Fertigungsprozesses steigert. Werkstoffvielfalt gezielt nutzen — von Stahl bis Titanlegierungen Die Sorte ist für die Werkstoffgruppen P, M und S ausgelegt: P steht für Stahl, M für rostfreie Stähle und S für hitzebeständige Superlegierungen und Titan. Damit eignet sich die Platte für Mischfertigungen oder Serien mit wechselnden Werkstoffen. Die Auswahl reduziert Rüstzeiten durch geringere Werkzeugvarianten und unterstützt konstante Oberflächengüten bei wechselnden Schnittbedingungen. Schneidstofftechnologie erklärt — warum Tiger·tec Gold wirkt Bei der Tiger-tec Gold Technologie handelt es sich um eine PVD-basierte Beschichtung auf beschichtetem Hartmetall, die Zähigkeit mit Verschleißschutz kombiniert. Diese Kombination sorgt für zuverlässige Spanbildung und sichere Schneidkanten bei thermisch anspruchsvollen Schnitten. Für Anwender bedeutet das: geringeres Risiko von Aufbauschneiden und stabilere Bearbeitungsprozesse. Anwendungshinweise für produktive Fräsprozesse Bei der Verwendung empfiehlt sich Anpassung von Schnittwerten an Werkstoff und Bearbeitungsstrategien; moderate Vorschübe bei hitzebeständigen Legierungen verlängern die Standzeit. Die Platte eignet sich besonders für mittlere bis hohe Schnittgeschwindigkeiten in Serienfertigungen. Werkzeug- und Prozessoptimierung führen zu messbarer Produktivitätssteigerung und planbarer Werkzeugkostenstruktur. Empfehlung: Die Tiger-tec Gold Sorte WSP45G für produktive Fräsprozesse über Metav Werkzeuge beziehen; bei technischen Fragen steht der Metav Kundenservice per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 gern zur Verfügung. Produktmerkmale Artikelnummer: P26315R20-WSP45G-WALTER Marke: Walter Tools Produktart: Fräswendeschneidplatte Serie: Tiger-tec Gold Sorte: WSP45G Wendeplattenbezeichnung: P26315R20 WSP45G Materialangabe: P / M / S Fakten Besonderheiten Beschichtung: Tiger·tec Gold (PVD) Schneidstoffklasse: beschichtetes Hartmetall Bearbeitbare Werkstoffe: P: Stahl Bearbeitbare Werkstoffe: M: rostfreie Stähle Bearbeitbare Werkstoffe: S: hitzebeständige Superlegierungen und Titan Einsatzgebiet: Fräsanwendungen Eigenschaft: Zäh, vielseitig FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die Wendeschneidplatte der Sorte WSP45G von Walter Tools ist für Stahl, rostfreie Stähle und hitzebeständige Superlegierungen bzw. Titan ausgelegt und deckt damit die ISO-Gruppen P, M und S ab. Welche Vorteile bietet die Tiger-tec Gold Beschichtung? Die Tiger-tec Gold Beschichtung kombiniert Verschleißschutz und Zähigkeit, wodurch die Standzeit erhöht und die Prozesssicherheit bei thermisch beanspruchenden Schnitten verbessert wird. Ist die Platte für Serienfertigung geeignet? Ja, die P26315R20 WSP45G ist speziell für produktive Fräsprozesse ausgelegt und reduziert Werkzeugwechsel durch konstante Verschleißcharakteristik, was Serienlaufzeiten verbessert. Wie beeinflusst die Sorte Spanbildung und Oberflächengüte? Die Sorte unterstützt stabile Spanbildung und hilft, Aufbauschneiden zu vermeiden; dadurch lassen sich gleichmäßige Oberflächengüten bei variierenden Schnittbedingungen erzielen. Gibt es Hinweise zur Schnittwertwahl? Bei rostfreien Stählen und Superlegierungen empfiehlt sich eine angepasste Schnittgeschwindigkeit und moderater Vorschub, um thermische Belastung der Schneidkante zu minimieren und die Lebensdauer zu optimieren. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns.
P26315R25 WKP25S WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP25S carbide grade for reliable edge life and broad applicability to steel and cast iron; this yields consistent machining performance and reduced changeovers. Order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. P26315R25 WKP25S — milling indexable insert (steel, cast iron) by Walter Tools The P26315R25 WKP25S is a coated milling indexable insert engineered to deliver productive machining of steel and cast iron in a wide range of cutting applications. Tiger‑tec Silver coating for long tool life Coated carbide grade WKP25S for stable cutting Optimised for machining steel and cast iron Enhances productivity with consistent edge Longer service life through modern coating technology The insert features coated carbide technology from the Tiger‑tec Silver series, which combines a wear‑resistant surface with a mechanically robust substrate. Coating systems of this class improve edge stability under the thermal and mechanical loads typical of steel and cast iron machining. For production environments, this translates into fewer index changes and more predictable tool cycles, contributing to improved process efficiency and lower per‑part tooling cost. Designed for steel and cast iron according to ISO classifications This grade is specified for the material groups P and K under ISO 513, meaning it is intended for unalloyed and alloyed steel as well as cast iron. The microstructure and coating of the grade control thermal resistance and abrasive wear so that the insert handles the typical chip formation and cutting temperatures of these materials. For users less familiar with ISO groupings: P indicates steels, K indicates cast iron—both are covered by this insert’s design. Shop‑floor benefits: productivity and predictable results As an indexable insert in the Tiger‑tec Silver line, the part delivers benefits that matter in daily production: consistent cutting behaviour, repeatable surface finish and reduced downtime for tool changes. The stable coating/substrate combination aids in maintaining tolerances across longer tool lives, which supports higher machine utilisation and predictable batch planning. Where process reliability is critical, the grade’s behaviour under load helps to maintain dimensional consistency and surface quality. Practical selection notes and compatibility The designation P26315R25 WKP25S identifies the insert geometry and the WKP25S grade; selection of the correct insert should match the cutter body and the intended machining strategy (roughing, semi‑finishing, finishing). Carbide grades and coatings are part of the overall cutting system: the same grade can perform differently depending on cutting parameters, holder rigidity and coolant. For best results, pair the insert with tool holders specified for the P26315R25 family and follow established cutting data for P and K workpieces. For application advice, stock checks or to place an order for Walter Tools inserts such as the P26315R25 WKP25S, contact Metav Werkzeuge for expert guidance and fast availability. Technical data SKU: P26315R25-WKP25S-WALTER Designation: P26315R25 WKP25S Product type: milling indexable insert Series: Tiger‑tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Applicable ISO group: ISO 513 (P / K) Material group: P / K (steel / cast iron) Coating technology: Tiger‑tec Silver (coated carbide) Special features Coated carbide insert Suitable for steel and cast iron machining Designed for stable edge life and consistent surface finish Part of the Tiger‑tec Silver product family FAQ Which materials are recommended for this insert? The P26315R25 WKP25S by Walter Tools is recommended for machining steel (P) and cast iron (K) in accordance with ISO 513 classifications. What advantage does the Tiger‑tec Silver coating provide? Tiger‑tec Silver offers a wear‑resistant surface that improves edge stability and extends tool life, helping to keep machining results consistent over longer tool cycles. How does the WKP25S grade differ from other grades? WKP25S is a coated carbide grade optimised for a balance of toughness and wear resistance, providing broad applicability across steel and cast iron workpieces and reliable cutting performance. Is this insert suitable for finishing operations? The grade’s characteristics support both semi‑finishing and finishing when used with appropriate insert geometry and optimised cutting parameters; final surface quality depends on the chosen geometry and process settings. How should compatibility with tool holders be checked? Confirm that the cutter body accepts the P26315R25 designation and verify seat geometry and clamping specifications; matching the insert family to the toolholder ensures correct indexing and secure clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
P26315R25 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the WKP35S grade and Tiger·tec Silver coating to extend tool life and maintain process stability when machining steel and cast iron; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. P26315R25 WKP35S milling insert – Tiger·tec Silver for steel & cast iron by Walter Tools The P26315R25 WKP35S is a coated carbide milling insert engineered for productive machining of steel and cast iron, optimised for stable chip formation and repeatable edge performance. Tiger·tec Silver coating for extended tool life WKP35S coated-carbide grade for steel and cast iron High abrasion resistance for stable machining Walter Tools quality and consistent edge performance Increase uptime with a wear‑resistant grade The WKP35S cutting grade, based on coated carbide technology, is developed to resist the abrasive wear typical when machining cast components while also coping with the thermal and mechanical loads of steel cutting. Using the Tiger·tec Silver coating means the cutting edge retains sharpness for longer, which translates into fewer tool changes, less machine downtime and a more predictable production rhythm. The insert’s balanced performance makes it a practical choice for mixed-production environments where reliability and run-to-run consistency are decisive. Better chip control for smoother processes Stable chip formation is central to efficient milling. The insert’s geometry and coating combination promote controlled chip breaking and evacuation when working in the ISO groups P (steel) and K (cast iron). Improved chip control reduces the risk of rework and tool damage, which supports shorter cycle times and lower production costs per part. The result is a measurable improvement in process security and surface finish quality on workpieces subject to typical shopfloor conditions. Versatility across common machining tasks Certified for the ISO material groups P and K, the grade supports a wide range of operations from roughing to semi‑finishing where abrasive wear and intermittent cutting prevail. For customers with mixed batches of unalloyed or alloyed steel and cast iron, the insert offers a pragmatic compromise between tool life and cutting performance. Explaining ISO group designations: P denotes suitability for steel, optimised for heat management and continuous chips; K denotes suitability for cast iron, optimised for abrasive wear resistance and short, breaking chips. Easy integration and selection guidance for production The insert integrates into standard milling toolholders compatible with its designation. Selection of the right geometry and cutting parameters remains geometry‑dependent; consult cutting data for speeds and feeds that match the workpiece and machine capability. The grade’s predictable wear behaviour simplifies tooling logistics and helps planning of regrind or replacement intervals. For customers seeking tailored process optimisation, a technical consultation will identify the most productive set‑up and feed strategies for specific components. Contact Metav Werkzeuge for personalised application advice and stock availability of the Walter Tools P26315R25 WKP35S milling insert; our specialists will assist with parameter recommendations and order handling Technical data SKU: P26315R25-WKP35S-WALTER Label: Fräswendeschneidplatte P26315R25 WKP35S Walter Tools Product type: Milling insert Facts Series: Tiger·tec Silver Grade: WKP35S Material groups: P / K Special features Coating: Tiger·tec Silver Base material: Coated carbide Suitable for: Steel, Cast iron Manufacturer: Walter Tools FAQ What materials is this insert designed for? The P26315R25 WKP35S insert is designed for ISO groups P and K, making it suitable for machining steel and cast iron with reliable wear performance. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and helps maintain a stable cutting edge, which lengthens tool life and enhances process consistency for Walter Tools milling inserts. Can this insert be used for finishing operations? Yes, depending on the chosen geometry and cutting parameters the insert can be applied for semi‑finishing and finishing; the grade’s stability supports consistent surface quality on steel and cast iron components. What benefits does the WKP35S grade offer for mixed production? WKP35S offers a balanced compromise between wear resistance and thermal stability, which is advantageous in mixed batches of unalloyed/ alloyed steel and cast iron where predictable tool life and fewer changes are desirable. Is the insert compatible with standard milling toolholders? The P26315R25 WKP35S designation corresponds to standard insert geometries and is compatible with holders designed for that insert size and form; consult holder specifications for mounting details. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered marks are used solely for identification and explanatory purposes. There is no affiliation or partnership between Metav Werkzeuge and the named brands beyond the offering of original, factory‑new products from the manufacturer.
P26315R25 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WPP35G carbide grade and proven stability in steel machining to extend tool life and improve process reliability; order the insert directly via Metav Werkzeuge or request application advice from our consultants. P26315R25 WPP35G milling indexable insert — Tiger·tec Gold coated, optimised for steel — Walter Tools P26315R25 WPP35G is a high-performance milling indexable insert designed for productive steel machining with a Tiger·tec Gold coating. Tiger·tec Gold coated carbide grade WPP35G Optimised for steel machining Stable chip formation and wear resistance Consistent tool life and productivity Precision coating for longer life and consistent cuts The combination of a coated carbide substrate and the Tiger·tec Gold technology delivers improved wear resistance and thermal stability under the conditions typical for machining steel. The grade is engineered to balance toughness and hardness, reducing flank and crater wear during continuous and interrupted cuts. By using this insert, shops can expect fewer tool changes and more predictable tool cycles, which supports steady production throughput and lowers overall machining costs. Better chip control and surface quality for reliable productivity Designed with chip formation and edge stability in mind, this insert improves stable chip formation and helps maintain a consistent surface finish on workpieces. The result is less rework and fewer machine interruptions. The insert’s properties contribute to higher productivity by enabling sustained cutting parameters and by offering repeatable performance across batches, which is particularly valuable in medium- to high-volume steel turning and milling operations. Application guidance and suitability across steel grades Classified for the ISO group P, the insert is suitable for unalloyed and alloyed steels where the typical heat and chip behaviour of steel must be managed. The WPP35G grade offers a balanced performance profile — a compromise between wear resistance and toughness — making it suitable for general-purpose steel applications. For specific cutting parameters or to check compatibility with a particular steel grade, Metav Werkzeuge can provide application recommendations and machining data to ensure optimal use of the Walter Tools insert. For Tiger·tec Gold performance with measurable gains in steel machining, contact Metav Werkzeuge for availability and application advice on the Walter Tools P26315R25 WPP35G insert — info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: P26315R25-WPP35G-WALTER Designation: P26315R25 WPP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Material code: P Suitable for: Steel (ISO group P) Series: Tiger·tec Gold SKU: P26315R25-WPP35G-WALTER Special features Coated carbide grade WPP35G Optimised for steel machining Balanced toughness and wear resistance Designed for stable chip formation and consistent tool life FAQ What materials is this insert suitable for? The insert is designed for machining steel (ISO group P); the WPP35G grade is tuned to handle the heat and chip formation typical of unalloyed and alloyed steels. How does Tiger·tec Gold improve performance? Tiger·tec Gold coating enhances thermal resistance and wear behaviour, which for the P26315R25 WPP35G insert helps extend tool life and supports more consistent cutting performance. Is this insert suitable for interrupted cuts? Yes, the balanced carbide grade and coating provide toughness and wear resistance appropriate for both continuous and interrupted steel milling operations. Which product designation should be ordered for this specification? Order the Walter Tools insert under the designation P26315R25 WPP35G or use the SKU P26315R25-WPP35G-WALTER for clarity. Where to get application data for specific steels? Metav Werkzeuge can supply tailored machining data and recommendations for the Walter Tools P26315R25 WPP35G insert to match particular steel grades and machining conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between Metav Werkzeuge and the listed brands. The offered item is an original, factory-new product of the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com