P2841S-3N-E57 WKP25S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WKP25S grade provides productive machining and extended edge life for demanding drilling and boring operations. The 3N‑E57 chipbreaker delivers consistent chip control, reducing interruptions and improving process stability. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific guidance. P2841S-3N-E57 WKP25S — Drilling/boring indexable insert, Tiger‑tec Silver, for steel and cast iron | Walter Tools The P2841S-3N-E57 WKP25S is a Tiger‑tec Silver indexable insert engineered for high‑productivity drilling and boring applications in steel and cast iron. Tiger‑tec Silver coated carbide Optimised for steel and cast iron machining 3N‑E57 chipbreaker for controlled chips Designed for stable edge life and productivity Greater throughput through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WKP25S grade results in a tool substrate and surface system that reduces flank wear and improves thermal resistance. For production environments this means fewer tool changes and more consistent component quality. The coated carbide composition provides a balance between toughness and wear resistance, making the insert well suited to the typical heat and chip formation encountered when machining steel and cast iron under continuous and interrupted cutting conditions. Consistent chip formation and reduced downtime The 3N‑E57 chipbreaker geometry is designed to produce predictable, manageable chips in both short‑breaking and semi‑continuous forms, helping to avoid chip entanglement in drilling and boring cycles. Predictable chip control reduces machine stoppages and manual intervention, which increases process reliability on CNC centres and in high‑mix workshops. Stable chip evacuation also supports consistent coolant flow and tool life, contributing to fewer unplanned stops. Practical benefits for workshop and CNC use As an indexable insert, this solution simplifies tool inventory and reduces regrinding needs; worn edges are indexed rather than replaced in their entirety. The insert’s characteristics support productive machining strategies, permitting higher feed rates where appropriate and enabling repeatable results from batch to batch. The design aims to combine ease of handling with measurable operational advantages such as improved component surface finish and predictable tool change intervals. Clear material guidance and recommended use cases The insert is specified for the ISO material groups P (steel) and K (cast iron), reflecting its suitability for unalloyed and alloyed steels as well as abrasive cast materials. In practical terms, this means the insert is appropriate for a broad range of drilling and boring tasks in general engineering and automotive production where mixed‑material machining is common. For best results, match cutting parameters to the workpiece material and machine rigidity; the insert’s WKP25S grade and chipbreaker geometry support versatile performance across varied job profiles. For tailored recommendations on Walter Tools inserts, application parameters or to discuss the Tiger‑tec Silver WKP25S grade for specific machining tasks, contact Metav Werkzeuge for expert consultation and rapid supply. Technical data Article number: P2841S-3N-E57-WKP25S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger-tec Silver Grade: WKP25S Chipbreaker: 3N-E57 Manufacturer: Walter Tools Facts No numerical performance data provided in the source Special features Coated carbide construction Suitable for ISO groups P (steel) and K (cast iron) Stable chip formation and controlled chips Designed for drilling and boring operations FAQ What materials is the insert suitable for? The P2841S-3N-E57 WKP25S insert is intended for steel (ISO group P) and cast iron (ISO group K), matching the thermal and chip‑forming characteristics typical of those materials. How does the 3N‑E57 chipbreaker help in practice? The 3N‑E57 geometry produces controlled chips that reduce the risk of jamming during drilling and boring, improving cycle times and lowering the need for manual chip removal. Is this insert appropriate for CNC drilling applications? Yes, the design and WKP25S grade support productive CNC drilling and boring operations, offering repeatable edge life and consistent surface quality when used with adequate machine rigidity. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances wear resistance and reduces friction, extending effective tool life and enabling stable machining across a range of steels and cast irons. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. This listing refers to original, brand‑new manufacturer parts.
P2841S-3N-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and consistent chip control for reliable holemaking in steel and cast iron; the insert’s Tiger·tec Silver technology and WKP35S grade support longer tool life and steady productivity. Order or request application advice via Metav Werkzeuge when specifying tooling for production use. P2841S-3N-E57 WKP35S drilling/bore-enlarging indexable insert, Tiger·tec Silver, Walter Tools The P2841S-3N-E57 WKP35S is an indexable cutting insert designed for drilling and bore-enlargement applications, optimised for machining steel and cast iron with a dedicated 3N-E57 chipbreaker geometry Tiger·tec Silver coating technology Grade WKP35S for steel and cast iron Consistent chip control for stable cuts Coated cemented carbide for wear resistance Stronger performance from a specialised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S cemented carbide grade provides a clear productivity advantage during holemaking in P- and K-group materials. The coating reduces flank and crater wear while the substrate maintains edge stability under cyclic thermal and mechanical loads; this minimises unscheduled tool changes and supports longer uninterrupted production runs. As a result, machining cycles become more predictable and the unit cost per hole is reduced through extended tool life. Reliable chip control and tool geometry for repeatable results The insert’s 3N-E57 chipbreaker has been developed to manage the characteristic chips from both steel and cast iron, improving evacuation from the bore and reducing the risk of re-cutting. The geometry promotes short, controllable chips in cast iron and stable, segmented chips in many steel grades, which together enhance process stability and surface quality. For operations where repeatability and consistent hole diameter are crucial, this insert supports steady cutting conditions and consistent component quality. Practical fitment and application benefits for production environments Designed as a drilling/bore-enlarging indexable insert, the item fits common holder systems for drilling and boring tools and is suitable for catalogue-specified geometries and grades. The designation and series make selection straightforward: Tiger·tec Silver indicates the coating technology, WKP35S the grade, and 3N-E57 the chipbreaker, while the substrate material is a coated cemented carbide optimised for abrasive loads in cast material and thermal stress in steels. For specific cutting data and holder compatibility, Metav Werkzeuge can supply detailed recommendations to align the insert with the machine, toolholder and workpiece material, ensuring the expected machining performance. For tailored application advice or to place an order for Walter Tools P2841S-3N-E57 WKP35S inserts, contact Metav Werkzeuge for consulting and delivery options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: P2841S-3N-E57-WKP35S-WALTER Product designation: P2841S-3N-E57 WKP35S Product type: drilling/bore-enlarging indexable insert Brand: Walter Tools Facts Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: 3N-E57 Material groups: P / K Special features Coated cemented carbide Application: steel and cast iron Geometry adapted for stable chip formation Intended for drilling and bore enlargement operations FAQ Which materials is this insert suitable for? The P2841S-3N-E57 WKP35S insert from Walter Tools is intended for machining steel (P) and cast iron (K), as specified by its grade and series. What does the WKP35S grade indicate? WKP35S denotes a Walter Tools coated cemented carbide grade within the Tiger·tec Silver family, chosen for balanced wear resistance and edge stability during holemaking in steels and cast irons. How does the 3N-E57 chipbreaker affect performance? The 3N-E57 chipbreaker promotes controlled chip formation for both steel and cast iron, aiding chip evacuation from bores and contributing to surface quality and process reliability. Is this insert supplied with a specific coating technology? Yes, the insert belongs to the Tiger·tec Silver series, which identifies the applied coating technology intended to extend tool life under typical drilling and bore-enlarging conditions. Can the insert be used on standard drilling toolholders? The insert is designed for drilling and bore-enlargement toolholders with the corresponding seat and clamping geometry; match the P2841S-3N-E57 WKP35S designation to the holder catalogue for compatibility. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected brand names and trademarks are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
P2841S-3N-E57 WSP45G Wendeplatten - Walter Tools
The combination of durable PVD-coated carbide, a dedicated chipbreaker geometry and broad material compatibility delivers reliable machining performance and extended tool life. Order the P2841S-3N-E57 WSP45G directly via Metav Werkzeuge or request technical advice from the consultants if further specification is required. P2841S-3N-E57 WSP45G — drill/boring indexable insert, Tiger·tec Gold, for milling applications — Walter Tools A P2841S-3N-E57 WSP45G drill/boring indexable insert engineered for high-performance machining, offering robust cutting-edge stability and controlled chip formation in demanding milling operations Tiger·tec Gold PVD coating for durable edges Suitable for Stahl, rostfreier Stahl and superalloys Versatile WSP45G grade for heavy-duty milling 3N-E57 chipbreaker for controlled chip formation Increased productivity through enhanced edge stability The Tiger·tec Gold PVD-coated carbide grade delivers a notable increase in edge life and consistent performance under cyclic thermal and mechanical loads. The WSP45G sort is formulated to combine toughness with thermal resistance, which reduces the risk of premature edge failure during interrupted cuts. For shop floors where process continuity matters, this sort supports longer tool change intervals and fewer unexpected stoppages, translating into measurable production benefits and a more predictable machining rhythm. Reliable versatility across common and demanding materials Designed for the ISO material groups P, M and S, the insert covers a wide spectrum: Stahl, rostfreier Stahl and heat-resistant superalloys including Titan. The material classification means the substrate and coating system are optimised for the specific heat generation and chip behaviour typical of these groups. The incorporated chipbreaker geometry 3N-E57 promotes stable chip segmentation, which improves evacuation and surface finish in milling applications, while reducing the likelihood of built-up edge on sticky alloys. Process security and simplified grade selection Specifying a coated carbide insert from the Tiger·tec Gold series reduces application uncertainty: the WSP45G grade is recommended where a balance of toughness and wear resistance is required. The clear material compatibility and the proven coating technology provide process security and reproducible results, helping to maintain dimensional accuracy and consistent surface quality batch after batch. For production engineers seeking a robust solution for demanding milling tasks, the combination of a defined chipbreaker and a dedicated PVD grade simplifies grade selection and risk assessment. For machining tasks that demand reliable edge life and consistent chip control, specify the Walter Tools P2841S-3N-E57 WSP45G with Tiger·tec Gold — contact Metav Werkzeuge for availability and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P2841S-3N-E57-WSP45G-WALTER Designation: P2841S-3N-E57 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material groups: P / M / S Chipbreaker: 3N-E57 Grade: WSP45G Special features Coating: Tiger·tec Gold (PVD) Substrate: coated carbide Application: drilling/boring and optimised for milling applications Suitable for: Stahl, rostfreier Stahl, superalloys and Titan FAQ What materials are compatible with this insert? The P2841S-3N-E57 WSP45G insert is specified for work in Stahl, rostfreier Stahl and heat-resistant superalloys, including Titan, consistent with its P / M / S material group designation. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and thermal stability, improving tool life and process security in milling and drilling operations. How does the 3N-E57 chipbreaker influence machining? The 3N-E57 chipbreaker promotes controlled chip formation and reliable evacuation, which assists in achieving stable cutting conditions and improved surface quality during milling. Is this insert suitable for interrupted cuts and heavy engagement? Yes, the WSP45G grade is engineered with toughness and edge stability to tolerate interrupted cuts and higher mechanical loads common in heavy milling applications. Can the P2841S-3N-E57 WSP45G be used interchangeably with other Tiger·tec Gold grades? Selection should be based on the specific application; the WSP45G grade balances toughness and wear resistance for general-purpose and demanding milling, while other Tiger·tec Gold grades may be optimised for different emphasis such as higher wear resistance or maximum hardness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned here for explanation only. There is no connection between Metav Werkzeuge and the named brands. The offered article is an original, factory-new product of the manufacturer.
P2841S-3N-E57 WXP40 Wendeplatten - Walter Tools
Benefit from the combination of uncoated WXP40 carbide, the 3N-E57 chipbreaker and an open-series Walter substrate for consistent chip control and stable drilling and boring cycles; order the insert directly via Metav Werkzeuge or request technical advice from their consultants. P2841S-3N-E57 WXP40 — Indexable insert for drilling and boring | Walter Tools The P2841S-3N-E57 WXP40 is an indexable insert designed for drilling and boring applications, offering controlled chip formation and a robust uncoated carbide grade for a variety of machining tasks. Uncoated carbide grade WXP40 Chipbreaker 3N-E57 for consistent chip control Open-series Walter substrate for flexibility Designation P2841S for drilling and boring Improved chip control for fewer interruptions The integrated 3N-E57 chipbreaker has been developed to deliver consistent chip formation, which reduces the risk of clogging and shortens non-productive time between tool changes. In practice, this means fewer manual interventions during long drilling or boring runs and more reliable cycle times. The design supports stable chips across a range of feed rates, helping to maintain surface quality and reduce rework. Emphasis on repeatable chip evacuation contributes directly to process reliability and predictable productivity gains. Material suitability and edge performance you can plan around Produced in the WXP40 uncoated carbide grade, this insert provides a predictable balance between toughness and wear resistance for many general machining tasks; however, workpiece suitability should be verified against the product matrix. The open-series substrate offers flexibility for different holder interfaces and process setups. For operators planning tool inventories, the insert’s specification allows straightforward comparison with existing carbide grades, assisting in selecting the most economical option that still meets edge-life expectations and dimensional stability. Process stability and integration into machining cells As an indexable insert designed for drilling and boring, the component supports streamlined tool replacement and consistent repeatability across batches. The compact designation and standardised form facilitate stocking and quick changeover, which is particularly useful in mixed-production environments. Adopting inserts with a controlled chipbreaker and known carbide grade helps to harmonise the cutting strategy across similar operations, reducing set-up variability and improving overall machine uptime while maintaining consistent hole quality. For reliable drilling and boring performance with Walter Tools' WXP40 grade, contact Metav Werkzeuge for ordering and technical consultation: Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: P2841S-3N-E57-WXP40-WALTER Designation: P2841S-3N-E57 WXP40 Product type: Indexable insert for drilling and boring Facts Grade: uncoated carbide (WXP40) Chipbreaker: 3N-E57 Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Special features Brand: Walter Tools Designation code: P2841S-3N-E57 SKU: P2841S-3N-E57-WXP40-WALTER Application note: Workpiece suitability to be checked against the product matrix FAQ What material is the insert made from? The insert is specified in the WXP40 uncoated carbide grade; the P2841S-3N-E57 WXP40 is supplied as an uncoated hardmetal grade for general machining. Which chipbreaker does this insert use and why does it matter? This insert features the 3N-E57 chipbreaker, which is designed to produce controlled chips and improve chip evacuation during drilling and boring operations. Is the insert suitable for all workpiece materials? Suitability depends on the specific workpiece and cutting parameters; for the P2841S-3N-E57 WXP40 the product matrix should be consulted to confirm suitability for a given material. How does the open-series designation affect tooling choices? The open-series substrate provides flexibility for different holder interfaces and process requirements, allowing easier integration into existing drilling and boring setups. Can this insert help reduce machine downtime? By providing consistent chip control and a predictable carbide grade, the insert contributes to fewer interruptions and more stable cycle times, which can reduce overall downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
P2841S-3N-E67 WKP35S Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Silver coating together with the WKP35S grade ensures stable chip formation and consistent performance in steel and cast iron drilling. Combine reliability, optimised chip control and predictable tool life for uninterrupted production. Order the P2841S-3N-E67 WKP35S directly via Metav Werkzeuge or ask our consultants if needed. P2841S-3N-E67 WKP35S Drill / boring indexable insert — Tiger·tec Silver, WKP35S (Walter Tools) P2841S-3N-E67 WKP35S is a drill/boring indexable insert designed for productive machining of steel and cast iron in industrial turning and drilling operations Tiger·tec Silver coating for extended tool life WKP35S grade for reliable chip control Optimised for steel and cast iron machining Geometry 3N-E67 for consistent cutting performance Higher uptime through optimised coating and grade selection The combination of the Tiger·tec Silver coating with the WKP35S substrate provides measurable improvements in wear resistance and edge stability. This indexable insert has been engineered to reduce flank and crater wear under the thermal and mechanical loads typical of ISO P (steel) and ISO K (cast iron) applications. The net result is fewer tool changes and more predictable cycle times, which supports process-oriented production planning and improves overall equipment effectiveness. The controlled friction properties of the coating also contribute to stable cutting temperatures and longer usable life. Stable chip control and repeatable machining results The integrated 3N-E67 chipbreaker geometry delivers consistent chip formation in both short, breaking chips typical of cast iron and the continuous-to-semi-continuous chips from many steels. The insert geometry and the WKP35S grade are matched to ensure good surface finish and reliable cutting-edge behaviour during drilling and boring operations. For fabrication environments requiring repeatability, this combination reduces rework and downstream inspection effort by maintaining consistent dimensional and surface-quality outcomes across batches. Material compatibility and application guidance Designed for ISO groups P and K, the insert is particularly suited to unalloyed and alloyed steel as well as cast iron. The designation clarifies that the tool has been optimised for the typical heat and chip flow of steel and for the abrasive, often brittle chip types of cast irons. In practical terms, the insert supports stable cutting at moderate to elevated cutting speeds; adjustments to feed and coolant strategy should follow the workpiece grade and hole depth. For specific drilling parameters and to match toolholders, consult the technical recommendations from Walter Tools or application specialists to ensure the best balance between productivity and tool life. For process-critical drilling in steel and cast iron, consult Metav Werkzeuge for application recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P2841S-3N-E67-WKP35S-WALTER Designation: P2841S-3N-E67 WKP35S Product type: Drill / boring indexable insert Grade: WKP35S Series: Tiger·tec Silver Core data Geometry: 3N-E67 Compatible material groups: ISO P (steel), ISO K (cast iron) Coating technology: Tiger·tec Silver Special features Coated carbide construction Optimised chipbreaker for drilling/boring Suitable for steel and cast iron machining Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The P2841S-3N-E67 WKP35S is intended for ISO P (steel) and ISO K (cast iron) applications and performs well on unalloyed and alloyed steels as well as a range of cast irons. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade increases resistance to abrasive and thermal wear, extending tool life and improving consistency under production loads. How does the 3N-E67 chipbreaker affect machining? The 3N-E67 chipbreaker is optimised to produce predictable chip shapes, supporting stable evacuation in both breaking chips typical of cast iron and the varied chip types encountered with steel. Is this insert suitable for high-feed drilling? The insert’s geometry and WKP35S grade support productive drilling; recommended feed and speed ranges depend on the workpiece material and hole depth—refer to application tables or Metav Werkzeuge for parameter selection. Can this insert improve surface finish? Yes, the matched grade and coating combination helps maintain edge stability, which contributes to consistent surface quality and reduced requirement for downstream finishing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
P2841S-3N-E67 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the 3N‑E67 chipbreaker to extend tool life and secure consistent chip control; order or request application advice via Metav Werkzeuge for seamless integration into production. P2841S-3N-E67 WSP45G — Drilling and bore‑enlarging indexable insert (Tiger‑tec Gold, 3N‑E67) by Walter Tools The P2841S-3N-E67 WSP45G is a drilling and bore‑enlarging indexable insert designed for high‑duty metalcutting where consistent edge stability and predictable chip formation are essential Tiger‑tec Gold PVD-coated carbide insert Suitable for steel, rostfreier Stahl and superalloys 3N‑E67 chipbreaker for stable chip control Robust edge for high process reliability Proven wear resistance for longer tool life The combination of Tiger‑tec Gold coating and a PVD‑treated WSP45G grade delivers improved wear resistance compared with uncoated grades, reducing flank wear and maintaining cutting geometry over more holes. This enhanced durability translates into fewer indexings and longer uninterrupted run times, which supports higher overall equipment effectiveness. The PVD layer also contributes to thermal resistance at the cutting edge, helping to control wear mechanisms when machining abrasive or heat‑generating materials. Predictable chips and better surface quality The 3N‑E67 chipbreaker is engineered to produce consistent chip shapes under a range of cutting conditions, improving evacuation in through‑hole and blind‑hole operations. Reliable chip control reduces the risk of built‑up edge and protects flanks from irregular contact, which in turn promotes a better surface finish and fewer secondary operations. For production environments, this predictability increases throughput and lowers the incidence of scrap caused by poor chip behaviour. Broad material capability for versatile use Classified for ISO groups P, M and S, the insert supports turning tasks on steel, rostfreier Stahl and heat‑resistant superalloys or titanium alloys. This means one grade can cover diverse workpieces commonly found in toolroom and small‑batch manufacturing, simplifying tooling inventories. The metallurgical design of the grade balances toughness and hardness so that the insert copes with the thermal and mechanical loads typical of drilling and bore‑enlarging processes. Stable cutting edge and production reliability A robust cutting edge geometry and the proven Tiger‑tec family background ensure repeatable performance in series production. The insert’s construction focuses on edge stability over repeated indexings, providing a solid base for process planners who prioritise consistent cycle times and reproducible results. When combined with an appropriate toolholder and correct cutting parameters, the result is increased process reliability and confidence in meeting dimensional and surface requirements. For tailored application recommendations on Walter Tools Tiger‑tec Gold inserts and to discuss the P2841S‑3N‑E67 WSP45G for specific machining tasks, contact Metav Werkzeuge for technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P2841S-3N-E67-WSP45G-WALTER Designation: P2841S-3N-E67 WSP45G Manufacturer: Walter Tools Product type: Drilling and bore‑enlarging indexable insert Grade / series: Tiger‑tec Gold Chipbreaker: 3N‑E67 Material groups: P / M / S Core specifications No numerical specifications provided in the source data Materials & features Coating: Tiger‑tec Gold (PVD) Grade: WSP45G (PVD-coated carbide) Applicable materials: Steel, rostfreier Stahl, heat‑resistant superalloys / titanium (ISO P/M/S) Intended use: Drilling and bore‑enlarging applications Series description: Tough, versatile PVD grade for milling and demanding machining tasks FAQ Which materials is this insert suitable for? The P2841S-3N-E67 WSP45G drilling and bore‑enlarging indexable insert from Walter Tools is suitable for machining steel, rostfreier Stahl and heat‑resistant superalloys (ISO groups P, M and S). What coating and grade does the insert use? The insert is a WSP45G grade with Tiger‑tec Gold PVD coating, designed to improve wear resistance and thermal robustness for extended cutting life. How does the 3N‑E67 chipbreaker benefit machining? The 3N‑E67 chipbreaker promotes controlled chip formation and evacuation during drilling and bore enlargement, which helps maintain surface quality and reduces the risk of rework. Can the insert be used for both through‑holes and blind holes? Yes, the insert’s chip control and edge stability make it suitable for through‑hole and blind‑hole operations when specified with the correct toolholder and cutting parameters. Is this product suitable for high‑volume production? The combination of a stable edge geometry and the Tiger‑tec Gold coating in the P2841S-3N-E67 WSP45G supports consistent performance in series production and frequent indexing cycles. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between Metav Werkzeuge and the manufacturers mentioned. The offered item is original, brand‑new merchandise from the stated manufacturer.
P2841S-3N-E67 WXP40 Wendeplatten - Walter Tools
Benefit from a blend of reliable chip control and a robust uncoated carbide grade that supports consistent drilling and counterboring performance; the 3N‑E67 chipbreaker enhances process stability while the WXP40 grade delivers wear-resistant cutting edges. Order directly via Metav Werkzeuge or consult our specialists for application guidance. P2841S-3N-E67 WXP40 – Drill / Counterbore Indexable Insert, 3N‑E67 Chipbreaker (Walter Tools) A P2841S-3N-E67 WXP40 indexable insert engineered for drilling and counterboring applications, offering a chip-controlling geometry and an uncoated carbide grade designed for general machining tasks where material suitability is confirmed by the product matrix. Uncoated carbide grade WXP40 3N‑E67 chipbreaker for chip control Designed for drilling and counterboring operations Walter Tools: stable cutting edge performance Consistent chip control for repeatable results The insert’s 3N‑E67 chipbreaker is engineered to promote predictable chip formation and evacuation during drilling and counterboring cycles. By shaping the chip stream and reducing irregular chip fragments, the geometry lowers the risk of re-cutting and tool vibration, which leads to more stable cutting and improved hole quality. For workshops seeking reduced cycle variability, this feature translates directly into fewer interruptions and a steadier process window. Economical cutting performance from an uncoated grade Built on the WXP40 uncoated carbide grade, the insert combines straightforward cutting behaviour with dependable wear resistance for a broad range of tasks. Uncoated carbide is often favoured where temperature and built-up edge management are predictable; in such conditions the grade offers economical tool life and predictable wear patterns. Users are advised to verify the match of grade to workpiece via the manufacturer’s product matrix to ensure optimum performance across different materials. Easy integration and clear handling benefits As an indexable insert, the component allows rapid seat changes and simpler tool management compared with solid-point cutters. The geometry of the P2841S series facilitates precise seating in compatible toolholders, reducing downtime during insert exchange and supporting consistent tool offsets. This approach contributes to lower tooling costs over time and easier inventory control for production environments where frequent insert replacement is part of normal operation. For reliable chip control and steady drilling performance with Walter Tools inserts, contact Metav Werkzeuge for tailored advice and procurement assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P2841S-3N-E67-WXP40-WALTER Article designation: P2841S-3N-E67 ISO designation: P2841S-3N-E67 WXP40 Manufacturer: Walter Tools Core data Grade: WXP40 Chipbreaker: 3N‑E67 Material: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Special features Uncoated carbide (as per series) Suitable for drilling and counterboring applications Indexable insert geometry P2841S-3N-E67 Check product matrix for material suitability FAQ What is the primary function of this insert? The P2841S-3N-E67 WXP40 is an indexable insert intended for drilling and counterboring operations where controlled chip formation is required. Is the WXP40 grade coated or uncoated? The WXP40 grade used for this insert is an uncoated carbide class as specified in the product series description. What benefit does the 3N‑E67 chipbreaker provide? The 3N‑E67 chipbreaker optimises chip control, promoting consistent chip flow and reduced vibration during drilling and counterboring. Can this insert be used on all materials? Material suitability must be checked in the manufacturer’s product matrix; the insert’s grade and geometry are designed for versatile use but require confirmation for specific workpiece materials. How does an indexable insert like this reduce downtime? By allowing quick insert changes and consistent seating in compatible holders, the P2841S-3N-E67 reduces tool-change time and supports repeatable tool offsets. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
P2841S-3N-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S grade and proven chip control for reliable machining of Stahl and Gusseisen; order the insert directly via Metav Werkzeuge or request application advice from the consultants. P2841S-3N-F57 WKP35S drill/bore-enlargement indexable insert – Tiger·tec Silver grade by Walter Tools The P2841S-3N-F57 WKP35S is a coated indexable insert designed for drilling and bore-enlargement tasks in Stahl and Gusseisen, offering stable chip control and enhanced wear resistance for productive turning and boring operations Tiger·tec Silver coating for longer life Grade WKP35S optimised for Stahl and Gusseisen Coated carbide substrate for abrasion resistance Chipbreaker 3N‑F57 for predictable chips Consistent performance under demanding cutting conditions The coated insert is engineered for high process reliability in demanding drilling and boring cycles. The Tiger·tec Silver coating combined with the WKP35S grade provides enhanced wear resistance and thermal stability, reducing flank and crater wear during extended runs. This results in fewer interruptions for index changes and a more predictable tool life, which supports steady production output and lower tooling costs per component. The geometry and coating synergy are tailored to manage heat generation typical of machining Stahl and Gusseisen, improving overall cycle consistency. Predictable chip formation and surface integrity A primary advantage of the insert is its 3N‑F57 chipbreaker, developed to produce short, controllable chips when working with a wide range of steels and cast irons. Improved chip control reduces the risk of surface damage and makes coolant and chip evacuation more effective in through‑tool or external coolant scenarios. The coated carbide substrate contributes to a stable cutting edge, helping to achieve consistent surface finishes and dimensional repeatability even in interrupted cuts or when entering varying material sections. Application guidance that maximises productivity For best results, integrate the insert within a system balanced for cutting speed, feed and toolholder rigidity. The WKP35S grade is intended specifically for the thermal and abrasive behaviours of Stahl and Gusseisen; selecting appropriate cutting parameters will exploit the coating’s strengths in heat resistance and the substrate’s durability. When higher material removal rates are required, the combination of robust edge geometry and the Tiger·tec Silver coating offers improved resistance to abrasive wear, supporting longer unattended machining intervals and greater output per shift. Contact Metav Werkzeuge for tailored machining parameters and reliable supply of Walter Tools Tiger·tec Silver inserts — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: P2841S-3N-F57-WKP35S-WALTER SKU: P2841S-3N-F57-WKP35S-WALTER Designation: P2841S-3N-F57 WKP35S Facts No further numerical data provided Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: 3N‑F57 Application: Stahl and Gusseisen Material composition: P / K FAQ What materials is the insert suited for? The P2841S-3N-F57 WKP35S insert from Walter Tools is optimised for machining Stahl and Gusseisen, covering a broad range of steels and cast irons according to the grade characteristics. Which coating and grade does this insert use? This indexable insert features the Tiger·tec Silver coating and the WKP35S coated carbide grade, combining thermal resistance with wear protection for prolonged cutting life. How does the chipbreaker affect machining? The 3N‑F57 chipbreaker produces short, stable chips in typical drilling and bore-enlargement operations, improving chip evacuation and protecting surface quality during long cycles. Can the insert be used for high‑speed machining? The Tiger·tec Silver coating and coated substrate are designed to improve thermal performance and wear resistance; suitable cutting parameters should be chosen for high‑speed applications to match machine and holder rigidity. Is this insert compatible with standard drill/reamer toolholders? The P2841S-3N-F57 WKP35S is an indexable insert intended for drilling and bore-enlargement tool systems; compatibility depends on the toolholder geometry and clamping system—check the holder specification for matching insert designation. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-3N-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold grade and the WSP45G PVD coating for a cost-effective, durable cutting solution that covers steel, stainless steel and heat‑resistant alloys; order via Metav Werkzeuge or consult the technical advisors for application support. P2841S-3N-F57 WSP45G indexable drilling/reaming insert – Tiger·tec Gold by Walter Tools The P2841S-3N-F57 WSP45G is a coated indexable insert engineered for drilling and bore‑enlarging operations in steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold grade for versatile performance WSP45G PVD coating for edge stability 3N‑F57 chipbreaker for controlled chips Suitable for steel, stainless and superalloys Robust edge stability for dependable cycle times The insert is based on Tiger·tec Gold technology and the WSP45G grade, a PVD‑coated carbide composition designed to combine toughness with thermal resistance. This balance reduces the risk of premature flank and crater wear during interrupted or high‑temperature cutting, which in practice means fewer tool changes and more predictable machine cycles. The result is a tangible improvement in process reliability for production runs where consistent surface finish and repeatability matter. Efficient chip control and secure cut direction Equipped with the 3N‑F57 chipbreaker, the component promotes compact, controllable chips during drilling and reaming operations. Controlled chip formation minimises tool retraction interruptions and reduces the likelihood of workpiece damage, particularly in long‑boring sequences. Where machinability varies—such as switching between unalloyed steel and tougher alloys—the chipbreaker helps maintain stable cutting forces, contributing to smoother feeds and extended insert life. Broad material compatibility and application guidance Marked for material groups P, M and S, the insert covers unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys including titanium. These designations indicate suitability rather than the insert material itself. In practical terms, this means the geometry and coating are optimised for a spectrum of thermal and mechanical chip formation behaviours: from the adhesiveness of stainless grades to the hard‑to‑cool cutting of superalloys. For best results, select cutting parameters aligned with the workpiece family and monitor coolant strategy when machining heat‑resistant materials. For application advice or to request a specification sheet for this Walter Tools insert, contact Metav Werkzeuge for tailored recommendations and availability. Technical data SKU: P2841S-3N-F57-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-3N-F57 WSP45G Walter Tools Type: Bohr-/Aufbohrwendeschneidplatte Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 3N‑F57 Material designation: P / M / S UID: P2841S-3N-F57-WSP45G-WALTER Core specifications Suitable for: Steel (P) Suitable for: Stainless steel (M) Suitable for: Superalloys / Titanium (S) Insert material: coated carbide (PVD) Story trigger: wendeplatten Special features Tiger·tec Gold technology PVD‑coated grade for thermal and wear resistance Stable cutting edge and reliable chip control Optimised for drilling and bore‑enlarging operations FAQ Which materials can be machined with this insert? The P2841S‑3N‑F57 WSP45G insert is designated for P, M and S groups — covering steel, stainless steel and heat‑resistant superalloys including titanium. What advantage does the Tiger·tec Gold technology provide? Tiger·tec Gold in the WSP45G grade delivers a combination of toughness and heat resistance, improving edge stability and tool life under fluctuating cutting conditions. How does the 3N‑F57 chipbreaker affect performance? The 3N‑F57 chipbreaker produces compact, controllable chips that lower the risk of rework and help maintain consistent feeds in drilling and reaming cycles. Is this insert suitable for interrupted cutting? Yes; the coated carbide composition and robust edge design are intended to resist the stress of interrupted cuts, supporting reliable machining in demanding sequences. Manufacturer: Walter Tools; Tübingen; Germany. Protected trademarks and trade names remain the property of their respective owners. Mark names and registered trademarks are used for identification and explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners.
P2841S-3N-F57 WXP40 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, consistent edge life and a catalogue-adapted material specification for productive holemaking; order the P2841S-3N-F57 WXP40 directly via Metav Werkzeuge or consult our technical team for suitability. P2841S-3N-F57 WXP40 indexable insert for drilling/boring – uncoated carbide, 3N-F57 chipbreaker, Walter Tools P2841S-3N-F57 WXP40 is an indexable cutting insert designed for holemaking applications where stable chips and repeatable results are required. WXP40 uncoated carbide grade 3N-F57 chipbreaker geometry Designed for productive hole enlarging Series: Walter Schneidstoffsorte - Serie offen Improve cycle times through reliable chip control The insert delivers improved machining stability because of its 3N-F57 chipbreaker, which is engineered to form and evacuate chips consistently. This results in fewer stoppages for chip clearing and reduced risk of workpiece damage. Enhanced chip control translates into measurable gains in throughput and less operator intervention, supporting a more efficient production flow. Predictable tool life for consistent surface quality The WXP40 grade is an uncoated carbide selected for balanced wear resistance and toughness. This combination helps maintain a steady cutting edge under varying conditions, giving repeatable dimensional and surface-finish results. For operations where predictability matters, the grade’s behaviour supports process planning and reduces scrap rates by providing a stable baseline for tool-change intervals. Practical use and compatibility with standard toolholders As an indexable insert for drilling and boring, the geometry and designation match common toolholder systems; the insert’s shape and seat are intended for rapid indexing to restore cutting performance. The designation P2841S-3N-F57 identifies the form factor and chipbreaker, allowing straightforward substitution in compatible tool assemblies and minimising downtime during maintenance. Selection advice and material suitability The insert’s Walter grade is specified broadly; material compatibility should be verified against the manufacturer’s product matrix. The uncoated WXP40 grade typically suits general holemaking tasks across many alloys, but checking the matrix ensures optimal selection for specific workpiece materials and cutting parameters, thereby safeguarding component quality and process reliability. For tailored advice on integrating Walter Tools’ WXP40 inserts into a machining process or to order the P2841S-3N-F57 variant, contact Metav Werkzeuge for a recommendation and availability check Technical data Article number: P2841S-3N-F57-WXP40-WALTER SKU: P2841S-3N-F57-WXP40-WALTER Manufacturer: Walter Tools Product type: Drilling/boring indexable insert Facts Net price: 13.5 Special features Grade: WXP40 (uncoated carbide) Chipbreaker: 3N-F57 Series: Walter Schneidstoffsorte - Serie offen Material: catalogue-dependent Note: Check workpiece suitability according to product matrix FAQ What material class is the WXP40 grade? The WXP40 grade is an uncoated carbide class; the P2841S-3N-F57 WXP40 insert uses this grade for a balance of wear resistance and toughness. Which chip control does this insert rely on? Chip control is provided by the 3N-F57 chipbreaker geometry, which on the P2841S-3N-F57 helps form and evacuate chips reliably during holemaking. Is the insert suitable for all steels and alloys? Material compatibility must be confirmed via the product matrix; the WXP40 grade covers a broad spectrum, but specific workpiece suitability for the insert should be checked before application. How is the P2841S-3N-F57 indexed in the toolholder? The insert is designed for standard indexable insert seats used in drilling/boring tool systems, allowing quick repositioning to restore cutting performance. Can this insert be used for finishing operations? The WXP40 grade is intended for productive holemaking with consistent edge life; for dedicated finishing, confirm the required surface quality against the grade’s performance in the product matrix. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
P2841S-4N-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP25S carbide grade and the P2841S‑4N‑A57 geometry for reliable drilling and boring performance in steel and cast iron; order via Metav Werkzeuge or consult our specialists for application-specific advice. P2841S-4N-A57 WKP25S drill/reamer indexable insert — Tiger‑tec Silver for steel and cast iron (Walter Tools) P2841S-4N-A57 WKP25S is an indexable insert designed to support drilling and boring operations in industrial environments, optimised for machining steel and cast iron and benefiting from Walter Tools’ Tiger‑tec Silver technology Tiger‑tec Silver coating for high wear resistance WKP25S grade for extended tool life Optimised P2841S‑4N‑A57 geometry for stable cutting Suited to steel (P) and cast iron (K) machining Predictable performance for demanding drilling operations The insert is engineered to deliver consistent cutting performance in repetitive drilling and boring tasks. The combination of the Tiger‑tec Silver coating and the WKP25S carbide grade reduces abrasive wear and improves edge stability, which supports longer intervals between index changes and fewer unplanned interruptions. For process planners this translates into measurable gains in machine uptime and part-to-part consistency when working with steel and cast iron components, particularly where short, breaking chips and abrasive conditions occur. Coating and grade explained for practical decision-making The Tiger‑tec Silver designation denotes a modern coating technology applied to a coated carbide substrate to improve hardness at the cutting edge and thermal stability during high‑energy operations. The WKP25S grade is tailored for the ISO P and K groups, meaning the material and coating are specifically balanced for the heat and chip shapes commonly encountered when machining steel and cast iron. The chipbreaker coded 4N‑A57 is designed to promote controlled chip formation and evacuation in drilling geometries, reducing vibration and supporting a predictable surface finish on bore walls. How this insert integrates into production and process support In practice, the insert’s geometry and grade make it suitable for production runs where reproducible hole quality and tool life are priorities. The insert can be incorporated into standard drill or boring tool holders compatible with P2841S‑series geometries and benefits from consistent tool‑life expectations under stable cutting parameters. For engineers seeking improved throughput, the combination of edge stability and chip control can reduce cycle times and lower scrap rates, while maintenance teams will appreciate the straightforward indexability and repeatable seating of the insert in the tool body. Contact Metav Werkzeuge for application guidance on Walter Tools inserts such as the P2841S-4N-A57 WKP25S and to discuss availability or tailored cutting parameters: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: P2841S-4N-A57-WKP25S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-4N-A57 WKP25S Walter Tools Product: drill/reamer indexable insert P2841S-4N-A57 WKP25S Manufacturer: Walter Tools Material designation: P / K Series: Tiger‑tec Silver Chipbreaker: 4N‑A57 Facts ISO designation: P2841S-4N-A57 WKP25S SKU/UID: P2841S-4N-A57-WKP25S-WALTER Compatible material groups: P (steel), K (cast iron) Special features Coated carbide grade WKP25S Tiger‑tec Silver coating technology Chip control geometry 4N‑A57 Designed for drilling and boring applications Optimised for stable chip formation and edge life FAQ Which materials is this insert suitable for? The P2841S‑4N‑A57 WKP25S insert from Walter Tools is suitable for machining steel (ISO group P) and cast iron (ISO group K), matching the material classifications indicated for the WKP25S grade. What are the primary advantages of the Tiger‑tec Silver coating? Tiger‑tec Silver provides improved wear resistance and thermal stability on the cutting edge of the WKP25S coated carbide insert, leading to longer tool life and more consistent bore quality under demanding drilling conditions. How does the 4N‑A57 chipbreaker affect machining? The 4N‑A57 chipbreaker is shaped to promote predictable chip formation and evacuation in drilling and reaming operations, reducing vibration and supporting consistent surface finish and dimensional accuracy. Can the insert be used in existing drill holders with P2841S geometry? Yes, the insert is designed for P2841S‑series mounting geometries and can be integrated into tool holders that accept that designation, enabling straightforward replacement and indexability without modification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new merchandise from the manufacturer.
P2841S-4N-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade to secure longer tool life and consistent chip control in drilling and boring operations; order directly via Metav Werkzeuge or ask the consultants for application-specific advice. P2841S-4N-A57 WKP35S drilling/boring indexable insert, Tiger·tec Silver (Walter Tools) The P2841S-4N-A57 WKP35S is a coated carbide indexable insert designed for drilling and boring applications, optimised for machining steel and cast iron. Tiger·tec Silver coated carbide Suitable for steel and cast iron 4N-A57 chipbreaker geometry High wear resistance and reliable performance Maximised material removal with consistent edge life The combination of the Tiger·tec Silver coating and the WKP35S carbide grade provides a tangible improvement in wear resistance and thermal stability during through‑tool and near‑surface cutting operations. The coating reduces abrasive and adhesive wear, which translates into longer intervals between index changes and fewer unplanned tool exchanges. For production environments working mainly with steel and cast iron, this means more predictable tool life and a lower total cost of machining per hole, while the insert’s engineered substrate helps maintain cutting edge geometry under typical cutting temperatures. Precision chip control reduces rework and cycle times The 4N-A57 chipbreaker geometry is tailored to promote reliable chip formation when cutting materials in ISO groups P and K, resulting in shorter, manageable chips and fewer surface defects. Stable chip control reduces the incidence of chip jamming in bores and minimises secondary finishing operations, which in turn improves effective machining time and process reliability. By favouring consistent chip evacuation and predictable cutting forces, the geometry supports steady cycle times and a reduction in scrap rates for serial drilling and boring tasks. Production-ready compatibility and reliable performance As an indexable insert for drilling and boring, the P2841S series delivers practical interchangeability and straightforward stockkeeping across a range of toolholders and geometries offered in standard catalogues. The WKP35S grade, combined with the Tiger·tec Silver series characteristics, is suited to most catalogue‑dependent main applications in steel and cast iron, providing operators with a robust option for mixed‑material production runs. The result is a balance of high process stability and consistent surface quality, making the insert a dependable choice for workshops seeking efficient, repeatable machining. For tailored application advice on Walter Tools’ Tiger·tec Silver WKP35S inserts or to discuss suitable drilling and boring solutions, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation and ordering support Technical Data SKU: P2841S-4N-A57-WKP35S-WALTER Item designation: P2841S-4N-A57 WKP35S Product type: drilling/boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 4N-A57 Machinable materials: Steel (P), Cast iron (K) Facts ISO groups: P, K Suitable applications: drilling and boring Material substrate: coated carbide Special features Coated carbide grade WKP35S Tiger·tec Silver coating technology 4N-A57 chipbreaker for controlled chips Optimised for steel and cast iron machining Reliable tool life and process stability FAQ What materials is this insert suitable for? The P2841S-4N-A57 WKP35S insert is specified for steel (ISO group P) and cast iron (ISO group K) machining. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, helping to extend edge life and reduce tool change frequency in drilling and boring operations. What is the role of the 4N‑A57 chipbreaker? The 4N‑A57 chipbreaker promotes short, controllable chips, enhancing chip evacuation and reducing the risk of bore blockages and surface defects during serial machining. Is this insert suitable for catalogue toolholders? Yes, the P2841S‑4N‑A57 WKP35S is designed for standard drilling and boring insert pockets and is compatible with catalogue‑specified toolholders and geometries. Can this grade handle mixed production runs? The WKP35S grade offers a combination of wear resistance and stable chip control that is well suited to mixed production runs involving steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand‑new factory goods of the manufacturer.
P2841S-4N-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a dedicated 4N-A57 chipbreaker and versatile P/M/S suitability to improve process stability and tool life; order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. P2841S-4N-A57 WSP45G drilling and boring indexable insert — Tiger·tec Gold, PVD-coated carbide by Walter Tools P2841S-4N-A57 WSP45G is a coated indexable insert designed for drilling and boring operations, optimised for demanding work on steel, stainless steel and heat-resistant alloys in high-productivity environments Tiger·tec Gold PVD coating Versatile for steel, stainless and superalloys Robust edge for stable chip formation Optimised for milling-style chip control High process security through advanced coating and grade The Tiger·tec Gold PVD-coated carbide grade WSP45G delivers a clear advantage in demanding operations by combining wear resistance with thermal stability. The coated substrate reduces flank wear and maintains a stable cutting edge over extended tool life, which translates into fewer indexings and consistent component quality. The applied technology supports higher cutting speeds and reliable material removal rates, allowing measurable productivity gains in series production and batch machining. Versatility across common and difficult-to-machine materials Thanks to its P/M/S rating, the insert is suitable for machining unalloyed and alloyed steel, stainless steel and heat-resistant superalloys and titanium. The 4N-A57 chipbreaker promotes controlled chip formation and reduces the risk of built-up edge, particularly during interrupted cuts or variable feed conditions. This combination makes the insert a pragmatic choice where varied workpiece materials appear in one operation, enabling simpler tool inventory management and fewer tool changes. Practical handling and integration for reliable workflows The indexable format supports fast replacement and repeatable positioning, reducing downtime and improving overall equipment effectiveness. The geometry and chipbreaker are designed for compatibility with standard drill and boring toolholders that accept the P2841S insert family, thereby maintaining existing clamping systems and simplifying retrofit. For workshop planners and production engineers, the result is a predictable, maintenance-friendly solution that contributes to cost-effective machining without compromising surface finish or dimensional accuracy. Contact Metav Werkzeuge for application guidance on Walter Tools Tiger·tec Gold inserts and to arrange tailored cutting data: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: P2841S-4N-A57-WSP45G-WALTER Article designation: P2841S-4N-A57 WSP45G Brand: Walter Tools Product type: Drilling/boring indexable insert Facts Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 4N-A57 Applicable material groups: P / M / S Special features Coating: Tiger·tec Gold (PVD-coated carbide) Material groups: steel, stainless steel, superalloys, titanium Format: indexable insert for drilling/boring applications Robust cutting edge for stable chip control and extended life FAQ Which materials is this insert suitable for? The P2841S-4N-A57 WSP45G insert is specified for steel, stainless steel and heat-resistant superalloys/titanium, reflecting its P/M/S designation and suitability for high thermal loads. What does the Tiger·tec Gold coating provide? Tiger·tec Gold is a PVD coating technology used on the WSP45G grade that enhances wear resistance and thermal stability, improving edge life and process consistency in challenging machining tasks. Is the insert intended for milling or drilling applications? Although classified as a drilling/boring indexable insert, the grade and chipbreaker are optimised for milling-style chip control and interrupted cutting conditions commonly encountered during drilling or reaming cycles. How does the 4N-A57 chipbreaker improve machining? The 4N-A57 chipbreaker promotes predictable chip formation, reduces the tendency for built-up edge and supports secure evacuation of chips, which helps maintain surface quality and reduces machining interruptions. Can this insert be used with existing toolholders? The insert matches standard toolholders designed for the P2841S family; compatibility should be verified with the chosen holder, but the indexable format is intended for straightforward integration into typical drilling and boring assemblies. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. The offered article is an original, factory-new product from the manufacturer.
P2841S-4N-A57 WXP40 Wendeplatten - Walter Tools
Combining the cost-effectiveness of the WXP40 uncoated carbide grade with the 4N-A57 chipbreaker, this insert provides consistent chip control and reliable performance for drilling and bore-enlargement applications. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice. P2841S-4N-A57 WXP40 – drilling/bore-enlargement indexable insert, uncoated carbide | Walter Tools The P2841S-4N-A57 WXP40 is an indexable insert engineered for drilling and bore-enlargement operations, offering a balance of stable chip formation and cost-conscious tool life in shop-floor production. Uncoated carbide grade WXP40 4N-A57 chipbreaker for chip control Designed for drilling and bore enlargement Predictable chip control for consistent machining The combination of the 4N-A57 chipbreaker and the uncoated WXP40 carbide grade is aimed at delivering predictable chip formation, reducing the risk of chip jamming and improving cycle time consistency. For manufacturers seeking measurable gains in throughput, the controlled chip flow provided by this insert translates into fewer interruptions and lower rework rates. The geometry of the insert supports repeatable results when incorporated into standard drilling toolholders, contributing to steady production output and easier process planning. Practical application guidance and material considerations This indexable insert is supplied in an open Walter carbide series, with the substrate specified as catalog-dependent, so the exact microstructure should be checked against the machining matrix for the intended workpiece. The insert’s properties favour general drilling and bore-enlargement tasks across a range of conventional materials; however, suitability for specific alloys or hardened materials must be confirmed against the product matrix. Clear specification of workpiece material and cutting conditions enables the right choice of insert grade and cutting data, reducing trial-and-error in the workshop. Integration into machining workflows for higher productivity Adopting this insert supports a rational approach to tooling: fewer tool changes and consistent performance help reduce non-productive time and simplify inventory by standardising on a dependable carbide grade. The WXP40 grade is an uncoated hardmetal designed for economical, repeatable performance, while the 4N-A57 chipbreaker assists with effective swarf evacuation. When combined with suitable drilling assemblies, this insert can contribute to improved spindle utilisation and steadier surface finish quality, allowing operators to meet production targets more reliably. Selection and safe operating practices Selection of the correct insert and cutting parameters is essential for achieving the promised benefits; confirm the WXP40 grade against the manufacturer's product matrix and verify holder compatibility before machining. Indexable inserts are precision components: correct clamping torque, secure seating and regular inspection for edge wear will maintain precision and protect the toolholder. Where process stability is critical, document the chosen parameters and record tool life to build a data-driven tool management approach that supports repeatability and cost control. Contact Metav Werkzeuge to confirm suitability for the intended application, request availability details and discuss the optimal cutting data for drilling or bore-enlargement tasks with this Walter Tools insert Technical data Article number: P2841S-4N-A57-WXP40-WALTER Designation: P2841S-4N-A57 WXP40 Type: Bohr-/Aufbohrwendeschneidplatte (drilling/bore-enlargement indexable insert) Core data SKU: P2841S-4N-A57-WXP40-WALTER Special features Grade: WXP40 Chipbreaker: 4N-A57 Series: Walter Schneidstoffsorte - Serie offen Material designation: Katalogabhängig Product type: Indexable insert for drilling and bore enlargement FAQ What materials is this insert suitable for? The WXP40 grade is an uncoated carbide designed for general drilling tasks; suitability depends on the specific workpiece material and must be checked against the Walter Tools product matrix for the P2841S-4N-A57 WXP40 insert. How does the 4N-A57 chipbreaker affect machining? The 4N-A57 chipbreaker promotes controlled chip formation and evacuation, which helps reduce chip-related interruptions and supports consistent cycle times when the insert is properly mounted in a compatible drilling assembly. Can the insert be used coated or is it only uncoated? This particular designation refers to an uncoated carbide grade; if a coated option is required for high-temperature or abrasive applications, consult the Walter Tools range and the product matrix for available coated alternatives. How is the insert mounted and secured? The P2841S-4N-A57 WXP40 insert is intended for standard indexable drilling toolholders; ensure correct seating and clamping torque as specified by the toolholder manufacturer to maintain precision and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. They are mentioned here solely for explanation. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the specified manufacturer.
P2841S-4N-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKP25S grade for consistent wear performance and reliable chip formation in steel and cast‑iron machining; order the inserts through Metav Werkzeuge or consult their team for application advice. P2841S-4N-E57 WKP25S drilling/boring indexable insert for steel and cast iron — Walter Tools A P2841S-4N-E57 WKP25S insert designed for drilling and boring operations, optimised for machining steel and cast iron with a focus on reliable chip control and stable cutting performance. Tiger‑tec Silver coating for enhanced wear resistance WKP25S coated carbide grade for versatile cutting ISO P & K compatibility for steel and cast iron 4N‑E57 chipformer for consistent chips High-performance cutting for demanding steels and castings The insert brings a clear productivity advantage when working with steel and cast iron thanks to the combination of a modern coating and a cutting grade tailored for those materials. The Tiger‑tec Silver technology reduces flank wear and helps maintain the stable cutting edge over longer cycles, which translates into fewer tool changes and more consistent component tolerances. For production environments where cycle time and reproducibility matter, this insert supports a smoother process and predictable tool life. Coating and grade: why they matter for wear and surface finish The WKP25S grade is a coated carbide solution developed for the thermal and mechanical demands of metalcutting in the P and K material classes. The surface finish benefits from the reduced built‑up edge tendency that the coating provides, resulting in improved part quality and less need for secondary finishing. In practical terms, the coating assists in dispersing heat and resisting abrasive wear when machining typical construction and cast components, so the overall manufacturing quality is elevated without complex process changes. Geometry and chip control that reduce interruptions Equipped with the 4N‑E57 chipformer, the insert promotes reliable chip breaking and evacuation in intermittent and continuous cuts. Controlled chip flow reduces the risk of chip re-cutting and workpiece damage, and it supports safer, more efficient production runs. The geometry is optimised to produce short, consistent chips when used within the recommended cutting parameters, thereby improving machine uptime and lowering the likelihood of tool‑related interruptions. Practical application benefits and process integration As an indexable insert from Walter Tools, this item integrates easily into established toolholders for drilling and boring operations, offering flexibility across batch and series production. The combination of Tiger‑tec Silver and the WKP25S grade provides a balance between wear resistance and toughness, making it suitable for a wide range of component geometries and feed rates. For operations aiming to standardise tooling across P and K materials, this insert supports that goal with predictable behaviour and straightforward grade identification. Contact Metav Werkzeuge to specify Walter Tools P2841S-4N-E57 WKP25S inserts for optimised steel and cast‑iron machining and to receive tailored application recommendations — info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: P2841S-4N-E57-WKP25S-WALTER Product type: drilling/boring indexable insert Designation: P2841S-4N-E57 WKP25S Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Grade: WKP25S Chipformer: 4N‑E57 Material application: Steel (P), Cast iron (K) Material type: P / K Special features Coating: Tiger‑tec Silver Substrate: coated carbide (Hartmetall) Optimised for chip control and wear resistance Suitable for drilling and boring operations FAQ What materials can this insert machine effectively? The P2841S-4N-E57 WKP25S insert is suitable for steel (ISO P) and cast iron (ISO K) applications according to its WKP25S grade and Tiger‑tec Silver coating. How does the Tiger‑tec Silver coating benefit the cutting process? The Tiger‑tec Silver coating on the WKP25S grade improves wear resistance and reduces built‑up edge, supporting consistent surface finish and longer tool life under typical steel and cast‑iron cutting conditions. What role does the 4N‑E57 chipformer play? The 4N‑E57 chipformer promotes predictable chip breaking and evacuation, which reduces machine interruptions and helps maintain stable cutting performance during drilling and boring. Is this insert compatible with standard drill/boring holders? The insert is designed for use in compatible indexable drill and boring systems; ensure the correct seat and clamp type are used for secure mounting and best results. Can this grade be used for high‑speed milling? The WKP25S grade and its coating are optimised for drilling/boring in P and K materials; suitability for high‑speed milling depends on specific machine parameters and should be validated in trial cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-4N-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP35S grade to extend tool life and reduce interruptions in drilling and counterboring operations; order directly via Metav Werkzeuge or consult our specialists for production‑oriented recommendations. P2841S-4N-E57 WKP35S — Drilling/counterboring indexable insert for steel and cast iron, Tiger‑tec Silver, Walter Tools A P2841S-4N-E57 WKP35S indexable insert engineered for drilling and counterboring tasks in steel and cast iron, combining coated carbide technology with a dedicated chipbreaker for controlled metal removal. P2841S-4N-E57 WKP35S by Walter Tools Tiger‑tec Silver coated carbide technology Optimised for steel (P) and cast iron (K) 4N‑E57 chipbreaker for stable chip control Boosted throughput through advanced coating and grade The combination of Tiger‑tec Silver coating and the WKP35S carbide grade delivers a measurable improvement in tool life and process consistency. Coated carbide reduces wear on cutting edges, enabling higher cutting speeds and longer continuous operation. For workshops and production lines this means fewer tool changes and lower per‑part machining costs; the enhanced wear resistance is particularly beneficial during extended drilling and counterboring cycles where heat and abrasion accelerate edge degradation. Consistent chip control for safer, cleaner machining The integrated 4N‑E57 chipbreaker is designed to produce predictable chip shapes and prevent entanglement during holemaking. Stable chip formation reduces vibration, protects the cutting edge and improves the surface finish of bore walls. For operators less familiar with chipbreaker functionality: the chipbreaker geometry modifies the cutting process to segment or curl chips, making them easier to evacuate and decreasing the risk of workpiece damage or tool jamming. Production security and application scope explained Belonging to the Tiger‑tec Silver series, the grade is a coated carbide solution geared towards ISO groups P and K, i.e. steel and cast iron according to ISO 513. This makes the insert a versatile choice for mixed‑material shops and series production where repeatability and predictable tool life are required. The design supports reliable repeatability in drilling and counterboring operations, helping to maintain cycle times and consistent part quality while lowering unscheduled downtime. Contact Metav Werkzeuge for tailored cutting recommendations and to source genuine Walter Tools Tiger‑tec Silver inserts; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: P2841S-4N-E57-WKP35S-WALTER ISO designation: P2841S-4N-E57 WKP35S Type: Drilling/counterboring indexable insert Manufacturer: Walter Tools Facts Material group: P / K Grade: WKP35S Series: Tiger‑tec Silver Chipbreaker: 4N‑E57 Special features Coating: coated carbide Suitable for: steel and cast iron (ISO 513) Application: drilling and counterboring Stable chip formation FAQ What materials is this insert suitable for? The P2841S-4N-E57 WKP35S insert is suitable for steel (P) and cast iron (K) in accordance with ISO 513, making it suitable for a wide range of general engineering and foundry‑related applications. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKP35S grade improves wear resistance and heat management, which extends cutting edge life and supports higher productivity during drilling and counterboring processes with Walter Tools inserts. What is the role of the 4N‑E57 chipbreaker? The 4N‑E57 chipbreaker provides controlled chip formation to reduce jamming and vibration; this improves bore quality and reduces the likelihood of interrupted cycles during holemaking. Can this insert be used in series production? Yes, the combination of coated carbide and the WKP35S grade is designed for process stability and repeatable performance, making it well suited to series production where consistent tool life and surface quality are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between our company and the trademark holders. The offered article is an original, brand‑new product from the manufacturer.
P2841S-4N-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, the versatile WSP45G grade and the 4N‑E57 chipbreaker to achieve stable chip formation and consistent tool life in demanding drilling and bore‑enlarging operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. P2841S-4N-E57 WSP45G — drilling and bore‑enlarging indexable insert, Tiger·tec Gold (Walter Tools) The P2841S-4N-E57 WSP45G is an indexable insert engineered for precision drilling and bore enlargement in milling‑style operations, optimised for machining Stahl, rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Gold PVD coating Versatile for Stahl and rostfreier Stahl Stable cutting edge with 4N‑E57 chipbreaker Designed for milling‑style drilling tasks High‑performance coating for extended tool life The insert uses the Tiger·tec Gold coating technology and the WSP45G grade, a PVD‑coated carbide designed for tough milling environments. This combination offers a stable cutting edge and improved wear resistance under the thermal and mechanical stresses typical of drilling and bore‑enlarging operations. For production workflows, the practical benefit is fewer tool changes and more predictable machining cycles, which supports higher uptime and a more efficient process. Predictable chip control and machining reliability Equipped with the 4N‑E57 chipbreaker, the design promotes controlled chip formation and evacuation during interrupted cuts and variable feed conditions. When machining Stahl and rostfreier Stahl or demanding high‑temperature alloys, the chip geometry helps prevent built‑up edge and reduces the risk of irregular surface defects. The result is a more consistent hole quality and surface finish, translating into less rework and steady throughput. Broad material capability for flexible production planning The grade is specified for ISO groups P / M / S, meaning suitability for a wide range of materials: unalloyed and alloyed Stahl, rostfreier Stahl, and heat‑resistant superalloys or titanium. This material flexibility allows a single insert type to be used across several job families, simplifying tool inventory and enabling quicker job changeovers while maintaining process stability and repeatable results. Practical advantages for workshop efficiency Beyond substrate compatibility, the insert’s construction supports robust edge retention under elevated temperatures and mechanical load. For operations that prioritise consistent cycle times and measurable productivity gains, the combination of coating and chipbreaker reduces unscheduled downtime and helps maintain defined quality tolerances. The engineering focus is on process stability rather than speculative performance metrics, so planning and cost forecasting remain reliable. Discuss machining parameters and application optimisation for the Tiger·tec Gold WSP45G insert with Metav Werkzeuge to maximise productivity and tool life — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: P2841S-4N-E57-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-4N-E57 WSP45G Walter Tools Product type: drilling / bore‑enlarging indexable insert Grade: WSP45G Series: Tiger‑tec Gold Chipbreaker: 4N‑E57 Material designation: P / M / S Manufacturer: Walter Tools UID: P2841S-4N-E57-WSP45G-WALTER Key Figures Compatible ISO material groups: P / M / S Coating technology: Tiger·tec Gold Chipbreaker designation: 4N‑E57 Special features PVD‑coated carbide grade for milling‑style inserts Engineered for controlled chip formation and edge stability Suitable for Stahl, rostfreier Stahl and high‑temperature alloys Designed for drilling and bore‑enlarging applications Original Walter Tools production quality FAQ What materials can be machined with this insert? The P2841S-4N-E57 WSP45G insert is specified for ISO groups P / M / S, enabling machining of Stahl, rostfreier Stahl and heat‑resistant superalloys or titanium‑class materials. How does the 4N‑E57 chipbreaker affect hole quality? The 4N‑E57 geometry promotes consistent chip control and evacuation during drilling and bore enlargement, which helps reduce built‑up edge and supports a more uniform surface finish when using the WSP45G grade. Is the Tiger·tec Gold coating suitable for high‑temperature machining? Yes; the Tiger·tec Gold PVD technology improves thermal resistance and wear behaviour, offering greater cutting edge stability under elevated temperatures commonly encountered in machining stainless and superalloy materials. Can one insert type be used across different parts of production? The combination of the WSP45G grade and the Tiger·tec Gold coating provides broad applicability across several material groups, allowing more uniform tool selection for varied job families and simplified inventory management. How does this insert support productivity in milling‑style drilling operations? By delivering durable edge life and stable chip formation, the insert reduces unscheduled tool changes and rework, contributing to steadier cycle times and improved overall productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and registered trade names are the property of their respective owners. Where appropriate, the brand Walter Tools is mentioned for identification purposes; the item offered is an original, factory‑new product from the manufacturer.
P2841S-4N-E57 WXP40 Wendeplatten - Walter Tools
Benefit from the combination of productive machining, stable chip formation and the WXP40 uncoated carbide grade for reliable performance in drilling and boring operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. P2841S-4N-E57 WXP40 — Drill/Boring Indexable Insert with 4N-E57 chipbreaker (Walter Tools) The P2841S-4N-E57 WXP40 is a drilling and boring indexable insert engineered to deliver consistent chip control and productive metal cutting across a range of workshop tasks. Uncoated carbide WXP40 grade 4N-E57 chipbreaker for stable chips Open-series Walter grade for flexibility Designed for productive machining Dependable chip control for continuous machining The insert is built around the 4N-E57 chipbreaker, which produces predictable, short-to-medium chips and thereby reduces the risk of tool jams and interrupted cycles. This characteristic supports higher process reliability and improved throughput in drilling and boring operations. The chip geometry is optimised for controlled evacuation, which helps to maintain cutting edge condition and reduces secondary finishing work. In practical terms, this means fewer unplanned stops, a steadier cycle time and a clearer route to consistent component quality. Material grade and application guidance for correct selection The WXP40 designation indicates an uncoated carbide grade from Walter’s open series; it is intended for a broad range of turning and drilling applications but requires a specific match to the workpiece material. The grade is described as unbeschichtetes Hartmetall in the series documentation, so users should consult the product matrix to verify suitability for particular steels, alloys or non-ferrous materials. Checking the matrix ensures the right compromise between wear resistance and toughness, which in turn extends effective tool life and reduces the frequency of insert changes. Practical integration and workshop benefits As an indexable insert for drilling and boring tools, the item fits standard insert seats and clamps used in many toolholders; correct seating and torque are crucial for repeatable performance. The open-series Walter grade offers flexibility across tool systems and replacement planning, supporting economical stock management. Combined with straightforward inspection routines and standardised clamping, the insert contributes to a leaner production flow and predictable maintenance cycles. The result is a measurable advantage in operational efficiency and fewer surprises on the shop floor. Contact Metav Werkzeuge today to discuss how the P2841S-4N-E57 WXP40 from Walter Tools can improve process stability; our consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: P2841S-4N-E57-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-4N-E57 WXP40 Walter Tools Product type: Drill/boring indexable insert Grade: WXP40 Chipbreaker: 4N-E57 Series: Walter Schneidstoffsorte - Serie offen Manufacturer: Walter Tools Material: Katalogabhängig Core specifications Designation code: P2841S-4N-E57 WPL sort: WXP40 Chipbreaker code: 4N-E57 UID/SKU: P2841S-4N-E57-WXP40-WALTER Special features Uncoated carbide (unbeschichtetes Hartmetall) Check product matrix for material suitability Suited for drilling and boring applications Open-series Walter grade for flexibility FAQ Which materials can the insert machine effectively? The P2841S-4N-E57 WXP40 uses an uncoated carbide grade intended for a broad spectrum of metals; the exact suitability should be checked in the product matrix for the WXP40 grade to confirm compatibility with specific steels, alloys or non-ferrous materials. Is the insert supplied with a coating? No. The WXP40 grade is an uncoated carbide variant, chosen where the balance of toughness and wear resistance from an uncoated grade is preferred. What chip behaviour can be expected in drilling operations? The 4N-E57 chipbreaker is designed for stable, controllable chip formation that supports reliable evacuation during drilling and boring, reducing the likelihood of chip-related interruptions. Can the insert be used in standard drill holders? Yes. The insert is an indexable type for drilling/boring tool systems; proper seating and clamping in the compatible toolholder are essential to achieve the described performance. How is the insert identified for reordering? Refer to the designation P2841S-4N-E57 WXP40 or the SKU/UID P2841S-4N-E57-WXP40-WALTER when reordering to ensure the correct chipbreaker and grade are specified. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is original, brand-new factory goods of the manufacturer.
P2841S-4N-E67 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and consistent chip control to increase throughput in serial drilling and boring operations. The graded Tiger·tec Silver coating and the WKP35S carbide grade deliver proven wear resistance and stable cutting behaviour for steel and cast iron, ensuring reproducible part quality and fewer tool changes. Order or request application advice via Metav Werkzeuge for tailored recommendations. P2841S-4N-E67 WKP35S — Drilling/Boring indexable insert (Tiger·tec Silver) by Walter Tools P2841S-4N-E67 WKP35S is an indexable insert designed for drilling and boring applications, engineered for productive machining of steel and cast iron with a specialised chipbreaker geometry for reliable chip formation. Tiger·tec Silver coated grade WKP35S Optimised for steel and cast iron machining Chipbreaker geometry 4N‑E67 for stable chips Coated carbide for high process reliability Maximise machining throughput with consistent wear resistance The graded Tiger·tec Silver coating combined with the WKP35S carbide provides a robust balance of hardness and toughness that extends tool life under typical drilling and boring loads. This combination contributes to stable flank wear and predictable edge performance, which reduces the frequency of insert changes and unscheduled downtime. As a result, production cycles benefit from improved productivity and repeatable component tolerances. The insert’s coating technology controls thermal and abrasive wear mechanisms common in steel and cast iron machining, translating material behaviour into dependable tool performance. Reliable chip control and secure cutting action for safe cycles A defining advantage is the chipbreaker 4N‑E67, engineered to manage chip shape and evacuation during deep or interrupted cuts. Controlled chip formation minimises recutting and reduces the risk of tool breakage, helping to maintain machine availability and operator safety. In practical terms, the geometry promotes short, manageable chips when working with both steel and cast iron, reducing the need for manual chip clearing and lowering the chance of surface defects. This predictable chip behaviour supports automated setups and increases confidence in unattended or lights-out production runs. Broad applicability across steel and cast iron operations The insert’s specification shows suitability for P and K workpiece groups, meaning it is tailored for a range of unalloyed and alloyed steel grades as well as various cast iron types. Such versatility allows consolidation of tool inventories where one insert can cover multiple component families, simplifying tool logistics and reducing storage complexity. The graded, coated carbide substrate withstands the abrasive tendencies of cast iron while retaining edge integrity for the heat and strain typical of steel machining, enabling consistent surface finish and dimensional control. Process security and integration into productive tool systems Designed as part of a proven product line, this indexable insert supports repeatable results when paired with matching cutter bodies and clamping systems from the same tool family. The combination of coating, grade and chipbreaker architecture enhances process security by delivering a steady cutting response across varied feed and speed settings. For production engineering, this means easier parameter selection and reduced trial periods when ramping up new programmes. Documentation and proven application data for similar geometries further shorten qualification times in serial manufacturing. For application-specific advice or to confirm suitability for a particular machining task with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for rapid consultation and supply options. Technical data Article number: P2841S-4N-E67-WKP35S-WALTER Designation: P2841S-4N-E67 WKP35S Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: 4N‑E67 Material suitability: P / K Product type: Drilling/boring indexable insert Manufacturer: Walter Tools UID: P2841S-4N-E67-WKP35S-WALTER Numbers / core technical data SKU: P2841S-4N-E67-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-4N-E67 WKP35S Walter Tools Special features / versions Coated carbide grade optimised for steel and cast iron Tiger·tec Silver coating technology Chipbreaker geometry for controlled chip formation Designed for productive drilling and boring operations FAQ What materials can be machined with this indexable insert? The P2841S-4N-E67 WKP35S insert is suitable for steel (P) and cast iron (K) applications, reflecting its coated carbide composition and dedicated chipbreaker design. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WKP35S grade increases wear resistance and thermal stability, which leads to longer tool life and consistent cutting edges under typical drilling and boring loads. Is the chipbreaker 4N‑E67 suitable for interrupted cuts? Yes, the 4N‑E67 chipbreaker is engineered to produce stable, short chips and supports secure cutting action in interrupted or challenging cutting conditions, improving process reliability. Can this insert be used across different cutter systems? The insert is designed for standard drilling and boring bodies compatible with its designation; using matching cutter holders recommended by the tool system supplier ensures correct clamping and optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-4N-E67 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for a combination of durable cutting performance and reliable chip control; order the P2841S-4N-E67 WSP45G insert directly via Metav Werkzeuge or contact our consultants for application support. P2841S-4N-E67 WSP45G Drill/Boring Indexable Insert – Tiger·tec Gold, Walter Tools P2841S-4N-E67 WSP45G is an indexable insert engineered for drilling and boring operations, offering robust cutting-edge stability for steel, stainless steel and heat‑resistant superalloys. Tiger·tec Gold PVD coating Versatile for steel, stainless steel and superalloys Stable cutting edge for demanding operations Optimised chip formation for consistent performance High-performance coating for longer tool life The combination of Tiger·tec Gold coating with a coated carbide substrate delivers improved wear resistance and thermal stability under elevated cutting temperatures. This grade is formulated to manage the heat and adhesion tendencies typical when machining steel and stainless steel, reducing flank wear and maintaining a consistent edge geometry. The result is extended tool life and fewer insert changes, which supports predictable production cycles and lower overall machining costs. Predictable chip control and machining reliability The dedicated 4N‑E67 chipbreaker geometry ensures controlled chip formation even in interrupted or variable cutting conditions. Stable chip evacuation reduces rework and tool interference, while the insert’s geometry promotes a repeatable cutting behaviour across batches. In practice, this means fewer machining interruptions and a noticeable increase in process stability when working with tougher materials such as superalloys and titanium alloys. Broad material compatibility for versatile shop use Designed for the demands of modern production, the grade supports ISO groups P / M / S, making it suitable for unalloyed and alloyed steels, stainless steel and heat‑resistant superalloys. The insert’s balance of toughness and hardness helps to prevent chipping on edges that encounter varying material properties, enabling the same insert type to be used across several workpiece families and reducing tooling complexity on the shop floor. Practical advantages for production environments As a drill/boring indexable insert, the component provides quick indexing and straightforward replacement, cutting down setup time and minimising machine downtime. The combination of a reliable cutting edge and optimised chip formation contributes to consistent surface quality and repeatable hole integrity, which benefits both prototype work and high‑volume production. For operations seeking dependable performance with less tooling management, this insert represents a pragmatic choice. For high‑performance machining with Walter Tools’ Tiger·tec Gold range, contact Metav Werkzeuge for tailored advice and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P2841S-4N-E67-WSP45G-WALTER Designation: P2841S-4N-E67 WSP45G Product type: Drill/boring indexable insert Grade: WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Chipbreaker: 4N‑E67 Material class: P / M / S Coating technology: Tiger·tec Gold (PVD) Special features Coated carbide grade WSP45G Suitable for steel, stainless steel, superalloys and titanium Optimised chip formation and stable cutting edge Engineered for reliable drilling and boring performance FAQ What materials can be machined with this insert? The P2841S-4N-E67 WSP45G insert from Walter Tools is suitable for steel, stainless steel and heat‑resistant superalloys (ISO groups P / M / S). How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on the WSP45G grade increases thermal resistance and wear protection, helping the insert maintain a stable cutting edge under higher cutting temperatures. Is the 4N‑E67 chipbreaker suitable for interrupted cuts? Yes; the 4N‑E67 chipbreaker is designed to produce consistent chips and improved evacuation in varying cutting conditions, which aids interrupted and unstable cuts. Can the insert be used across different machines and holders? The designation P2841S-4N-E67 identifies the geometry and chipbreaker; compatibility depends on the corresponding toolholder system, but the insert’s design supports quick indexing and replacement for efficient tool changes. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are used here solely for explanation. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory‑new product from the manufacturer.
P2841S-4N-E67 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, a robust uncoated cemented carbide grade and streamlined integration into standard toolholders for reliable drilling and bore-enlargement operations. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice. P2841S-4N-E67 WXP40 – drilling/reaming indexable insert with 4N‑E67 chipbreaker, uncoated cemented carbide | Walter Tools The P2841S-4N-E67 WXP40 is an indexable insert for drilling and bore enlargement, supplied in an uncoated cemented carbide grade with a 4N‑E67 chipbreaker designed to produce stable, controllable chips in a range of machining scenarios. Uncoated cemented carbide WXP40 Chipbreaker 4N‑E67 for controlled chips Designed for drilling and reaming operations Series: Walter open grade Consistent chip control for steady production gains The insert is built for predictable machining results: the combination of the 4N‑E67 chipbreaker and the WXP40 uncoated cemented carbide grade supports reliable chip formation and evacuation under typical drilling and bore‑enlargement conditions. Predictable chips reduce the risk of tool clogging and machine downtime, which translates into more consistent cycle times and a steadier production flow. Where specific material compatibility is a concern, the product matrix should be consulted to confirm optimal cutting parameters and workpiece suitability. Versatility in drilling and bore-enlargement applications As a dedicated drilling and bore‑enlargement insert, this item offers flexibility across standard toolholder systems and drilling heads. The geometry and chip control characteristics help stabilise the cut and can improve surface finish when paired with the correct feed and speed settings. While the grade is uncoated, the cemented carbide composition delivers wear resistance appropriate for many general machining tasks; however, matching the insert to the workpiece and machining strategy remains essential for maximising tool life and productivity. Practical selection advice and integration tips Selecting the correct insert involves considering the workpiece material, cutting data and machine dynamics. For the Walter Tools grade supplied here, check the detailed product matrix to align the WXP40 grade with the intended material and cutting conditions. When clamping into holders, ensure secure seating and correct torque on the pocket screw to maintain repeatable performance. For tailored recommendations on feeds, speeds and holder selection, Metav Werkzeuge provides application support and technical data to aid integration without affecting production schedules. For application-specific recommendations or to order Walter Tools inserts, contact Metav Werkzeuge for expert advice and swift processing: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: P2841S-4N-E67-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-4N-E67 WXP40 Walter Tools Product type: drilling/reaming indexable insert Facts Chipbreaker: 4N‑E67 Grade: uncoated cemented carbide (WXP40) Series: Walter Schneidstoffsorte - Serie offen Special features Product type translation: drilling/reaming indexable insert Material: catalogue-dependent Manufacturer: Walter Tools Sortenbeschreibung: uncoated cemented carbide; check product matrix for material suitability FAQ What materials is this insert suitable for? Material suitability depends on the specific workpiece and cutting conditions; the WXP40 uncoated cemented carbide grade should be checked against the product matrix to confirm compatibility. Is the insert coated? No, the P2841S-4N-E67 WXP40 is supplied as an uncoated cemented carbide grade. What advantages does the 4N‑E67 chipbreaker provide? The 4N‑E67 chipbreaker promotes controlled chip formation and evacuation, supporting stable drilling and bore‑enlargement performance. Can this insert be used in standard toolholders? Yes, the insert is designed for integration into common drilling and boring tool systems; correct seating and secure clamping are important for repeatable results. Where to get cutting data and selection help? Cutting data and application guidance are available through Metav Werkzeuge; consult the product matrix or contact the technical team for tailored recommendations. Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is original, factory‑new goods of Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
P2841S-4N-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S grade for reliable machining of steel and cast iron; the insert delivers stable chip formation and extended tool life under productive cutting conditions. Order the insert via Metav Werkzeuge or consult the team for application advice. P2841S-4N-F57 WKP35S drilling/boring indexable insert – Tiger‑tec Silver, for steel & cast iron | Walter Tools The P2841S-4N-F57 WKP35S is a drilling/boring indexable insert engineered for productive metalcutting operations on steel and cast iron, combining a wear-resistant coating with a geometry optimised for stable chip control. Tiger‑tec Silver coating for long life WKP35S grade for abrasive materials Optimised chipbreaker 4N-F57 Designed for drilling and bore finishing Higher uptime through hard-wearing coating and stable chip control The Tiger‑tec Silver coating applied to this insert provides a balanced combination of wear resistance and thermal stability, which reduces flank and crater wear during extended cycles. As a result, shops experience fewer tool changes and a more predictable process window. The WKP35S carbide grade is formulated for applications characterised by abrasive wear and intermittent cutting typical of cast components, while remaining fully suitable for the machining of general steel grades. This translates into consistent surface quality and longer service intervals for the toolholder system. Geometry and chip management for productive cutting The insert’s chipbreaker 4N-F57 and its cutting-edge geometry produce short, controlled chips even under medium to heavy depths of cut. This engineered chip control reduces the risk of chip entanglement in bores and promotes stable cutting forces during feed transit. In practical terms, the geometry helps maintain cycle times and surface finish in drilling and bore-enlargement operations, supporting higher throughput without compromising component quality. For operators unfamiliar with chipbreaker nomenclature, the term denotes the small grooves and flats that guide and fragment swarf away from the cutting edge. Application guidance and process benefits for workshop environments Designed as an indexable solution for demanding tasks, this insert supports both catalogue-driven and geometry-dependent applications in the machining of steel and cast iron. Its compatibility with common insert clamping systems makes replacement straightforward, while the coated carbide substrate preserves edge integrity under mixed cutting conditions. The net effect for production is improved repeatability and less process variation, which is particularly beneficial in batch production or mixed-material workflows where tool life and predictable performance are essential. Contact Metav Werkzeuge for tailored application recommendations and to secure the right insert configuration for specific drilling or boring tasks. Technical data SKU: P2841S-4N-F57-WKP35S-WALTER Product: P2841S-4N-F57 WKP35S Type: drilling/boring indexable insert Grade: WKP35S Series: Tiger‑tec Silver Chipbreaker: 4N-F57 Material designation: P / K Manufacturer: Walter Tools Core technical data No numerical specifications provided in the product feed Special features Coating: Tiger‑tec Silver Material base: coated carbide Suitable for: steel Suitable for: cast iron Typical applications: drilling and bore-enlargement Insert designation: P2841S-4N-F57 WKP35S Brand: Walter Tools FAQ What materials is this insert suited for? The P2841S-4N-F57 WKP35S insert is designed for machining steel and cast iron, with the WKP35S grade optimised to resist abrasive wear common in these groups. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the insert increases wear resistance and thermal stability, extending cutting life and improving process reliability during continuous drilling or bore-enlargement cycles. How does the chipbreaker 4N-F57 affect performance? The chipbreaker 4N-F57 controls and fragments chips to prevent entanglement in bores and to stabilise cutting forces, which helps maintain consistent surface finish and reduces downtime for chip clearing. Is this insert compatible with standard clamping systems? The insert conforms to common drilling/boring indexable insert formats and can be used with compatible insert seats and holders; refer to the toolholder documentation for specific clamping details. Can the insert be used for finishing operations? The geometry supports bore-enlargement and finishing where stable chip control and edge integrity are required; final suitability depends on machine rigidity and chosen cutting parameters. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-4N-F57 WSP45G WSP45G Wendeplatten - Walter Tools
P2841S-4N-F57 WSP45G Bohr-/Aufbohrwendeschneidplatte von Walter Tools P2841S-4N-F57 WSP45G ist eine Wendeschneidplatte für effizientes Bohren und Aufbohren in Stahl, rostfreien Stahl und hitzebeständigen Superlegierungen; entwickelt für produktive Zerspanung unter anspruchsvollen Bedingungen. Tiger·tec Gold PVD-Beschichtung für lange Standzeit Zähe Sorte WSP45G für stabile Spanbildung Speziell für Stahl, rostfreien Stahl und Superlegierungen Präziser Spanbrecher 4N-F57 für kontrollierte Späne Kompatibel mit gängigen Bohr- und Aufbohrwerkzeugen Produktivität sichern durch stabile Spanbildung Die P2841S-4N-F57 WSP45G Wendeschneidplatte kombiniert eine zähe Hartmetall-Basis mit der Tiger·tec Gold PVD-Beschichtung, was eine deutlich verbesserte Standzeit und gleichbleibende Schnittqualität ermöglicht. Anwender profitieren von vorhersehbarer Verschleißentwicklung und reduzierten Rüstzeiten, weil die Schneidkante länger verwendbar bleibt. Durch die optimierte Spanform und den 4N-F57 Spanbrecher reduziert sich Aufbauschneiden, was Nachbearbeitungen minimiert und die Produktivität erhöht. Vielseitigkeit in der Werkstoffbearbeitung Für die Bearbeitung von Stahl, rostfreiem Stahl und hitzebeständigen Superlegierungen bietet die Sorte WSP45G eine ausgewogene Kombination aus Zähigkeit und Wärmebeständigkeit. Die Sorte ist speziell abgestimmt auf die typische Wärmeentwicklung und die anspruchsvolle Spanbildung dieser Werkstoffe, sodass sichere Zerspanungsparameter und reproduzierbare Oberflächenqualitäten erzielt werden. Für Anwender bedeutet das weniger Maschinenstopps und eine bessere Planbarkeit von Fertigungsprozessen. Praxistauglichkeit und Prozesssicherheit Die Wendeschneidplatte ist für den Einsatz in Bohr- und Aufbohrprozessen konzipiert und unterstützt eine kontrollierte Spänevorschubsteuerung dank des definierten Spanbrechers. Dadurch sinkt das Risiko von Spanverwicklungen und Werkzeugbrüchen. Die Kombination aus beschichtetem Hartmetall und ausgeprägtem Spanformer sorgt für konstante Bearbeitungsergebnisse auch bei längeren Einsatzzeiten, was besonders in Serienfertigung und bei anspruchsvollen Werkstoffen relevant ist. Empfehlung: Für hohe Prozesssicherheit und längere Werkzeugstandzeiten die WSP45G-Sorte von Walter Tools über Metav Werkzeuge beziehen oder technische Beratung anfordern unter info@metav-werkzeuge.com / +49 2822 7131930 Produktmerkmale Artikelnummer: P2841S-4N-F57-WSP45G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Bezeichnung: P2841S-4N-F57 Sorte: WSP45G Spanbrecher: 4N-F57 Produktart: Bohr-/Aufbohrwendeschneidplatte Material: P / M / S Fakten Besonderheiten Schneidstoffklasse: beschichtetes Hartmetall Beschichtung: Tiger·tec Gold (PVD) Bearbeitbare Werkstoffe: Stahl (P), rostfreien Stahl (M), Superlegierungen/Titan (S) Einsatzgebiet: Fräs- und Bohranwendungen Optimierter Spanformer Produktive Zerspanung FAQ Was sind die Vorteile der WSP45G-Sorte gegenüber Standard-Hartmetall? Die WSP45G-Sorte bietet durch die Tiger·tec Gold PVD-Beschichtung erhöhte Standzeit und bessere Wärmebeständigkeit, wodurch die Wendeschneidplatte länger schneidfähig bleibt und die Prozesssicherheit steigt. Für welche Werkstoffe eignet sich die Bohr-/Aufbohrwendeschneidplatte am besten? Die Wendeschneidplatte ist ausgelegt für Stahl, rostfreien Stahl und hitzebeständige Superlegierungen, wobei die Sorte speziell auf die typischen Span- und Wärmebedingungen dieser Werkstoffe abgestimmt ist. Wie unterstützt der Spanbrecher 4N-F57 die Zerspanung? Der Spanbrecher 4N-F57 formt kompakte Späne und reduziert Aufbauschneiden, was zu stabileren Schnittbedingungen, weniger Maschinenstillstand und verbesserten Oberflächen führt. Kann die Wendeschneidplatte in Serienfertigung eingesetzt werden? Ja, die Kombination aus zähem Hartmetall und PVD-Beschichtung macht die Wendeplatte besonders geeignet für Serienprozesse, in denen konstante Standzeiten und Wiederholgenauigkeit gefordert sind. Wer kann bei Fragen zur Anwendung beraten? Technische Beratung ist über Metav Werkzeuge verfügbar; für konkrete Prozessparameter empfiehlt sich die Abstimmung mit dem Anwendungstechnik-Team unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-4N-F57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control and an uncoated carbide grade, which together support stable machining and predictable tool life; use the open-series flexibility to match a wide range of processes and consult the product matrix for material suitability. Order the P2841S-4N-F57 WXP40 directly via Metav Werkzeuge or ask our consultants if needed. P2841S-4N-F57 WXP40 – Drilling and boring indexable insert, Walter Tools The P2841S-4N-F57 WXP40 is an indexable insert designed for drilling and boring applications, offering an uncoated carbide grade and a 4N‑F57 chipbreaker for controlled chip formation. Uncoated carbide grade WXP40 4N‑F57 chipbreaker for reliable chip control For drilling and boring indexable applications Open series for broad process flexibility Predictable cutting performance with controlled chips The insert’s core benefit lies in consistent chip formation delivered by the 4N‑F57 chipbreaker, which supports secure evacuation of swarf and reduces the risk of irregular cutting forces. Manufactured in the uncoated carbide grade WXP40, the cutting geometry is tailored to provide a balance between toughness and edge retention; this results in stable machining across varying process conditions. For users less familiar with technical grades: an uncoated carbide offers straightforward behaviour under differing cutting speeds and feed rates, making tool adjustment and process optimisation more predictable. Efficient production through repeatable tool life and flexibility Adopting this indexable solution helps to maintain steady cycle times and reduces process interruptions thanks to its open series design that enables straightforward replacement and inventory management. The combination of a robust substrate and the specified chipbreaker supports cost-effective operation by promoting longer usable edge life under appropriate conditions. Material suitability is not universal: the product matrix must be consulted to determine which workpiece materials the grade is most appropriate for, ensuring the selected insert matches the intended application and machining parameters. Practical integration for workshop use and process planning As an insert intended for drilling and boring, this component is conceived for integration into modular tool systems where indexable inserts are employed. The open-series designation simplifies procurement and process adaptation, while the clear chip control characteristics help to maintain surface quality and reduce rework. For complex or specialised materials, refer to the product documentation and matrix to verify compatibility; when necessary, the supplier can advise on optimal cutting parameters and appropriate toolholder pairings to achieve the desired productivity and component quality. Bold planning around replacement intervals will support uninterrupted production flow. For tailored advice on applying the Walter Tools P2841S-4N-F57 WXP40 in specific machining scenarios, contact Metav Werkzeuge for expert guidance and procurement assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P2841S-4N-F57-WXP40-WALTER Designation: P2841S-4N-F57 WXP40 Type: Drilling/boring indexable insert Grade: WXP40 Chipbreaker: 4N‑F57 Series: Walter Schneidstoffsorte - Serie offen Manufacturer: Walter Tools Material specification: Katalogabhängig Facts No numerical specifications provided in the source data Special features Uncoated carbide grade WXP40 Chipbreaker 4N‑F57 Intended for drilling and boring indexable applications Open series for process flexibility Material suitability according to product matrix FAQ What materials is this insert suitable for? Material suitability must be checked in the product matrix; the P2841S-4N-F57 WXP40 is an uncoated carbide grade intended for a broad set of applications but requires verification against the specific workpiece material. Does the insert have a coating? The cutting grade is supplied as uncoated carbide (WXP40), so no additional coating is specified for this insert. What is the role of the 4N‑F57 chipbreaker? The 4N‑F57 chipbreaker is designed to promote controlled chip formation and evacuation, supporting stable cutting forces and consistent surface quality with the P2841S-4N-F57 WXP40. Can this insert be used for both drilling and boring operations? Yes, the insert is intended for drilling and boring indexable applications; compatibility with specific toolholders and machining setups should be confirmed prior to use. How should material compatibility be verified? Refer to the product matrix supplied by the manufacturer to determine the recommended workpiece materials and cutting parameters for the P2841S-4N-F57 WXP40. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com