P2841S-6N-F57 WKP35S Wendeplatten - Walter Tools
High wear resistance and reliable chip control combine to reduce downtime and secure consistent part quality. The coated carbide grade and optimised chipbreaker deliver a measurable improvement in tool life and process stability. Order the insert directly via Metav Werkzeuge or ask the consultants for cutting data and availability. P2841S-6N-F57 WKP35S indexable drilling/reaming insert, Tiger·tec Silver – Walter Tools A P2841S-6N-F57 WKP35S insert engineered for high-productivity drilling and boring operations in steel and cast iron applications. Tiger·tec Silver for enhanced wear resistance Optimised chipbreaker 6N‑F57 for stable chip control Coated carbide grade WKP35S for long tool life Application: drilling and reaming in ISO P & K materials High productivity through coating and geometry The combination of the Tiger·tec Silver coating and a coated carbide substrate is designed to deliver consistent cutting performance under industrial conditions. The surface treatment reduces abrasive and adhesive wear, which results in longer intervals between indexable insert changes and fewer unscheduled tool stops. The integrated chipbreaker 6N‑F57 promotes short, controllable chips; this reduces the risk of entanglement and supports uninterrupted machining cycles. In practice, the result is improved cycle-time stability and predictable output for production runs. Reliable machining of steel and cast iron Selected for its compatibility with ISO groups P and K, the grade WKP35S balances toughness and hardness to handle the heat and chip behaviour typical of steel and cast iron. The substrate and coating combination is tuned to manage the abrasive nature of cast components and the thermal loads encountered when machining alloyed steels. This leads to more consistent surface finishes and fewer rejects in serial production. The grade is therefore suited to workshops seeking predictable results across a range of ferrous materials. Lower total machining cost and process security Using a wear-resistant grade together with an optimised chipformer reduces the frequency of insert changes, which lowers the total cost per hole and increases uptime. The plate geometry was developed to maintain a stable cutting edge so that dimensional scatter is minimised and rework is less likely. For manufacturers focused on throughput and repeatability, the insert provides a cost-effective means of improving process reliability while keeping maintenance routines straightforward. For machining-critical applications, specify the Walter Tools P2841S-6N-F57 WKP35S and contact Metav Werkzeuge for tailored cutting data and current availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: P2841S-6N-F57-WKP35S-WALTER Designation: P2841S-6N-F57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger-tec Silver Manufacturer: Walter Tools UID: P2841S-6N-F57-WKP35S-WALTER Facts Material groups: P / K (ISO 513) Chipbreaker: 6N‑F57 Grade: WKP35S Substrate: coated carbide Special features Coating technology: Tiger·tec Silver Application: drilling and reaming operations Main advantages: wear resistance, stable chip formation Suitable materials: steel and cast iron FAQ What materials is the P2841S-6N-F57 WKP35S suitable for? The P2841S-6N-F57 WKP35S insert from Walter Tools is designed for machining steel and cast iron in accordance with ISO material groups P and K. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and reduces adhesive wear, which extends the insert life and stabilises cutting performance. How does the 6N‑F57 chipbreaker affect machining? The chipbreaker 6N‑F57 produces short, controlled chips that improve chip evacuation and reduce the risk of built-up edge, supporting continuous drilling and reaming cycles. Is the insert suitable for high-volume production? Yes, the WKP35S grade and coated carbide construction are optimised for productive series machining, offering longer tool life and fewer interruptions. Can this insert be used for both drilling and boring operations? The geometry and designation indicate suitability for drilling and reaming/boring applications; the insert is intended for such operations in compatible tool holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only and do not imply any affiliation with Metav Werkzeuge. The offered item is an original, factory-new product of the manufacturer.
P2841S-6N-F57 WSP45G Wendeplatten - Walter Tools Technical data - Coating: Tiger-tec Gold - Material: P / M / S - Suitable for steel - Suitable for stainless steel - Application: versatile milling applications
Take advantage of Tiger·tec Gold wear resistance and the WSP45G grade for reliable machining of steel, stainless steel and heat-resistant alloys; the stable cutting edge reduces rework and keeps cycle times predictable. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Bohr-/Aufbohrwendeschneidplatte P2841S-6N-F57 WSP45G – Tiger·tec Gold indexable insert by Walter Tools The Bohr-/Aufbohrwendeschneidplatte P2841S-6N-F57 WSP45G is a PVD-coated indexable insert designed for drilling and boring operations, optimised for machining steels, stainless steels and superalloys. Tiger·tec Gold PVD increases wear resistance WSP45G grade for steel, stainless and superalloys Stable cutting edge for consistent surface finish Engineered for drilling and boring operations Maximise productivity with Tiger·tec Gold wear protection The Tiger·tec Gold PVD system delivers a combination of hardness and toughness that extends tool life under thermally demanding cutting conditions. The coating reduces abrasive wear and helps maintain a sharp cutting edge over longer tool life cycles, which translates into fewer index changes and higher uptime. For production environments seeking predictable tool performance, this coating technology supports stable machining windows and reduces the frequency of regrinding or replacement. Secure chip control and process stability across ISO groups P, M and S Designed for the ISO groups P / M / S, the insert handles a broad range of materials: unalloyed and alloyed steel, stainless steel and heat-resistant superalloys and titanium. The 6N-F57 edge geometry promotes controlled chip formation and evacuation, lowering the risk of built-up edge and improving dimensional repeatability. As a result, machining cycles remain consistent and the need for corrective finishing is minimised, benefitting throughput and part quality. Consistent surface quality and repeatability in industrial settings A stable cutting edge and precise insert geometry combine to produce reliable surface finishes and dimensional accuracy. This is particularly valuable in medium- to high-volume production where component conformity is critical. The insert’s construction supports repeatable results over many cycles, reducing scrap rates and enhancing overall process economics. The focus here is on measurable improvements: fewer rejects, less inspection time and smoother downstream operations. Integration into existing tool systems and practical handling The designation P2841S-6N-F57 identifies the insert form and edge specification, enabling straightforward integration into compatible drill and boring toolholders. The WSP45G grade, a Walter Tools offering, is a coated carbide optimised for milling-related toughness demands transferred to drilling tasks. Users can expect straightforward identification for tool management and consistent replacement intervals when using identical insert codes across similar operations. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to arrange supply or application consultation — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: P2841S-6N-F57-WSP45G-WALTER Article designation: P2841S-6N-F57 ISO designation: P2841S-6N-F57 WSP45G Grade: WSP45G Series: Tiger-tec Gold Edge breaker: 6N-F57 Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Material groups: P / M / S Facts Suitable for steel (P) Suitable for stainless steel (M) Suitable for heat-resistant superalloys and titanium (S) Special features PVD coating technology (Tiger·tec Gold) Coated carbide grade (WSP45G) Designed for controlled chip formation Stable cutting edge for repeatability FAQ What materials is this insert suitable for? The P2841S-6N-F57 WSP45G insert is formulated for steel, stainless steel and heat-resistant superalloys (ISO groups P, M, S). How does the Tiger·tec Gold coating improve tool life? The Tiger·tec Gold PVD layer on the WSP45G grade increases wear resistance and heat tolerance, which prolongs edge life and maintains cutting performance in demanding cycles. Is this insert compatible with standard drilling and boring holders? The insert form P2841S-6N-F57 follows common indexable insert designation practices and is intended for compatible drill and boring toolholder systems that accept this geometry. What performance benefits does the 6N-F57 edge give? The 6N-F57 edge geometry promotes stable chip control and a robust cutting edge, resulting in improved surface finish and reduced risk of built-up edge in challenging materials. Can the WSP45G grade be used in high-temperature applications? Yes, WSP45G as a PVD-coated carbide is designed to cope with the thermal and mechanical stresses typical when machining stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-6N-F57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of controlled chip formation, robust uncoated carbide specification and an insert geometry optimised for reliable holemaking — ensuring fewer interruptions and higher process stability. Order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. P2841S-6N-F57 WXP40 Bohr-/Aufbohrwendeschneidplatte by Walter Tools — uncoated solid carbide, 6N‑F57 chipformer The P2841S-6N-F57 WXP40 is an indexable drill/boring insert designed for efficient holemaking applications where controlled chip formation and consistent edge performance are required. Uncoated solid carbide grade WXP40 6N‑F57 chipformer for controlled chips Designed for drilling and reaming operations Compatible with Walter tool systems Greater productivity through stable chip control The insert’s core advantage is its ability to deliver predictable chip behaviour. The integrated 6N‑F57 chipformer shapes chips to reduce entanglement and evacuation issues, which in turn lowers the frequency of process interruptions and tool handling. For operators this means higher spindle uptime and fewer manual interventions during consecutive holemaking cycles. The grade used is an uncoated solid carbide formulation intended to balance wear resistance and toughness; this offers reliable cutting-edge life in a range of common machining tasks. By converting technical attributes into concrete gains — fewer stoppages and steadier cycle times — the component supports a measurable increase in production efficiency. Precision holemaking with repeatable performance Indexable geometry allows rapid reconditioning of the cutting edge without full-tool replacement, increasing process repeatability and reducing overall tooling costs. The insert’s design is tuned for drilling and bore enlargement duties and is compatible with established Walter clamping and toolholder systems, enabling straightforward integration into existing toolchains. The geometry supports consistent hole quality by maintaining a stable cutting edge under varying feed rates. For production planners this translates to reduced scrap rates and less downstream rework. Where dimensional tolerances are critical, the combination of a stable insert grade and a controlled chipformer contributes to a reproducible machining outcome. Application guidance and integration support Selection of the WXP40 grade should be validated against the specific workpiece material and machining parameters; the grade is an uncoated carbide class and its suitability depends on the application matrix. If material compatibility or parameter adaptation is required, technical consultation is recommended to determine optimal speeds, feeds and coolant strategy. Metav Werkzeuge can provide pragmatic advice for tool assembly choices and machining recipes to integrate the insert into a productive process. The association with a recognisable tooling brand also brings the reassurance of tested geometry and manufacturing control, supporting safer, more efficient production planning. Contact Metav Werkzeuge for tailored application advice and order handling — technical consultants assist with compatibility checks and process recommendations Technical data Article number: P2841S-6N-F57-WXP40-WALTER SKU: P2841S-6N-F57-WXP40-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte Grade: WXP40 Chipformer: 6N‑F57 Manufacturer: Walter Tools ISO designation: P2841S-6N-F57 WXP40 Core technical facts No dimensional or coating specifications supplied No mass or packaging data supplied Special features and versions Uncoated solid carbide (sorten- and series info in product matrix) Series: Walter Schneidstoffsorte - Serie offen Sort: WXP40 Intended for drilling and reaming applications Compatibility with Walter toolholder systems FAQ Which materials is this insert suitable for? The P2841S-6N-F57 WXP40 insert is a general-purpose uncoated carbide grade; suitability should be checked against the specific workpiece material in the product matrix and adjusted by process parameters where necessary. How does the 6N‑F57 chipformer benefit machining? The 6N‑F57 chipformer shapes chips to improve evacuation and reduce entanglement, which enhances cycle time stability and lowers the risk of tool breakage during holemaking operations. Is the insert supplied with a coating? The WXP40 designation denotes an uncoated carbide grade; no coating is specified for this variant in the available data. Can this insert be used in existing Walter tool systems? Yes — the insert is designed for compatibility with Walter toolholder systems, allowing integration into established drilling and boring setups. How to confirm correct feed and speed for an application? Feed and speed depend on the workpiece material and toolholder; consult the application matrix for WXP40 or contact Metav Werkzeuge for tailored recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-7N-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for reliable, productive machining of Stahl and cast iron; the coated cemented carbide substrate delivers stable chip formation and extended tool life. Order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. P2841S-7N-A57 WKP25S drilling/boring indexable insert — Walter Tools, Tiger‑tec Silver, for Stahl and cast iron P2841S-7N-A57 WKP25S is a drilling/boring indexable insert engineered for demanding metalcutting applications, offering a coated cemented carbide grade from Walter Tools' Tiger‑tec Silver family. Series Tiger-tec Silver coating WKP25S coated carbide grade Optimised for Stahl and cast iron Stable chip formation and wear resistance Higher productivity thanks to advanced coating and grade The combination of the Tiger‑tec Silver coating and WKP25S grade yields a balanced performance profile: improved heat resistance allows higher cutting speeds while the coated cemented carbide substrate maintains edge integrity. This results in measurable gains in productivity and a reduced need for frequent insert changes. The coating technology reduces built‑up edge and improves oxidation resistance, which is particularly beneficial in continuous drilling or bore enlargement operations where consistent cutting conditions are critical. Reliable machining of Stahl and cast iron with controlled chip behaviour Designed specifically for ISO groups P and K, the insert matches the thermal and mechanical demands of Stahl and cast iron workpieces. The geometry and chipbreaker designation (7N‑A57) promote chip control, reducing the risk of chip packing and improving process stability. For customers less familiar with chipbreaker nomenclature: the chipbreaker is the engineered surface geometry that shapes and breaks chips into manageable lengths, thereby protecting the workpiece and toolholder and facilitating unattended or automated cycles. Consistent surface quality and reduced downtime through robust edge performance Stable flaking behaviour and wear resistance from the coated substrate contribute to repeatable surface finishes and dimensional stability in production. The insert’s attributes support longer intervals between changeovers, lowering machine downtime and process variability. In series production, this consistency translates into higher first‑pass yield and fewer rework operations, strengthening overall cost efficiency without compromising precision. Straightforward integration and economical operation in existing tooling systems As an indexable insert, the component is intended for quick indexing and replacement in compatible drill or boring heads, delivering low per‑part tooling costs over time. The standard ISO designation and the clear grade identification simplify inventory management and substitute selection across operations. For efficient implementation, pairing the insert with suitable coolant strategy and stable clamping is recommended to exploit its full potential while maintaining toollife. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts and to discuss tailored supply and process optimisation for Stahl and cast iron machining Technical data SKU: P2841S-7N-A57-WKP25S-WALTER Name: Bohr-/Aufbohrwendeschneidplatte P2841S-7N-A57 WKP25S Walter Tools Manufacturer: Walter Tools Facts Grade: WKP25S Series: Tiger‑tec Silver Chipbreaker: 7N‑A57 Material suitability: P / K Applicable materials: Stahl, cast iron Special features Coating technology: Tiger·tec Silver Substrate: coated cemented carbide Optimised for Stahl and cast iron Stable chip formation and good wear resistance Designed for productive machining and wide material coverage FAQ What materials is this insert suited for? The P2841S-7N-A57 WKP25S insert is optimised for machining Stahl and cast iron according to ISO P and K classifications. What does WKP25S indicate? WKP25S designates Walter Tools’ coated cemented carbide grade tailored for balanced wear resistance and toughness in the Tiger‑tec Silver series. How does the 7N‑A57 chipbreaker affect performance? The 7N‑A57 chipbreaker geometry promotes reliable chip control, reducing the chance of long, stringy chips and improving process stability during drilling and bore enlargement. Can this insert handle high cutting speeds? Yes; the Tiger‑tec Silver coating enhances thermal resistance, enabling elevated cutting speeds compared with uncoated grades while maintaining toollife. Is the insert compatible with standard indexable drill holders? The insert follows standard ISO designation conventions and is compatible with tooling systems designed for this insert geometry; check holder specifications for fit and clamping requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for clarification and comparison only; there is no affiliation between our company and the trademark owners. The offered item is an original, brand‑new product from Walter Tools.
P2841S-7N-A57 WKP35S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating with the WKP35S grade to achieve reliable chip control and extended tool life in demanding steel and cast iron applications; order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. P2841S-7N-A57 WKP35S — drilling/boring indexable insert for steel and cast iron | Walter Tools The P2841S-7N-A57 WKP35S is a coated carbide indexable insert engineered for drilling and boring operations, optimised for machining steel (ISO group P) and cast iron (ISO group K). Tiger·tec Silver coated carbide grade WKP35S Optimised 7N‑A57 chipformer for reliable chips Designed for steel and cast iron machining High process stability and extended tool life Maximise machining efficiency in steel and cast iron The Tiger·tec Silver technology combined with the WKP35S cutting grade offers a balance of wear resistance and toughness that favours productivity in mixed production environments. As a coated carbide insert, it is designed to tolerate the thermal and mechanical loads typical for ISO group P (steel) and K (cast iron) materials. This results in consistent tool life and reduced frequency of index changes, lowering machine downtime and improving overall throughput. The coating reduces abrasive wear while maintaining edge stability in common industrial cutting conditions. Reliable chip control for fewer interruptions The integrated 7N‑A57 chipformer geometry is tailored to produce manageable, short or curled chips in both steel and cast iron, reducing the risk of entanglement and improving evacuation from the cutting zone. Controlled chip formation decreases the likelihood of surface damage and flank wear, which directly supports consistent surface quality and reduces rework. Clear chip flow also aids coolant access and thermal control, contributing to stable cutting forces and predictable cycle times in repetitive drilling and boring operations. Improved process stability and economical production Designed for stable performance under a range of cutting parameters, this insert supports higher feed rates and longer tool life compared with uncoated alternatives. The combination of coating technology and grade selection reduces flank wear and chipping, permitting reliable operation across batch runs. For production managers this translates into lower unit costs through fewer tool changes and steadier part quality. The insert’s compatibility with standard indexable toolholders keeps integration straightforward, enabling rapid adoption without special fixture investment. Contact Metav Werkzeuge for application-specific recommendations and genuine Walter Tools inserts featuring the WKP35S grade — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: P2841S-7N-A57-WKP35S-WALTER Product type: drilling/boring indexable insert Series: Tiger·tec Silver Grade: WKP35S Chipformer: 7N‑A57 Brand: Walter Tools Facts Applicable material groups: P (steel) Applicable material groups: K (cast iron) Special features Coating technology: Tiger·tec Silver Material of insert: coated carbide Main application: drilling and boring operations Optimised for stable chip formation and extended tool life FAQ What materials is this insert suitable for? The P2841S-7N-A57 WKP35S insert is specified for steel (ISO group P) and cast iron (ISO group K) machining under standard drilling and boring conditions. What does the 7N‑A57 designation mean? The 7N‑A57 code refers to the chipformer geometry calibrated to produce reliable, short chips that improve evacuation and surface finishing during drilling and boring. How does the Tiger·tec Silver series benefit production? The Tiger·tec Silver coating on the WKP35S grade enhances wear resistance and edge strength, leading to longer tool life and consistent component quality in repetitive production. Is this insert compatible with common indexable drilling holders? Yes, the insert is designed for standard indexable drilling and boring tool systems and can be integrated without special adaptors, supporting quick tool changes. Can the insert handle continuous production runs? The combination of coated carbide and the WKP35S grade ensures process stability and reduced flank wear, making it suitable for extended production sequences in industrial environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered item is original, factory-new merchandise from the manufacturer.
P2841S-7N-A57 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WSP45G grade for longer tool life and predictable chip control; order directly via Metav Werkzeuge or consult their application specialists for process integration. P2841S-7N-A57 WSP45G — drilling/boring indexable insert (Walter Tools) The P2841S-7N-A57 WSP45G is a drilling/boring indexable insert engineered for robust, versatile machining across steel, rostfreier Stahl and heat‑resistant alloys in industrial production environments. Tiger·tec Gold PVD coating for enhanced wear resistance Designed for steel, rostfreier Stahl and superalloys Stable cutting edge and effective chip control 7N‑A57 Durable coating and material versatility for reliable cycle times The insert belongs to the Tiger·tec Gold family and uses the WSP45G PVD grade, combining a tough substrate with a high‑performance coating to reduce flank wear and maintain cutting geometry over extended runs. This PVD technology is specifically engineered to withstand the thermal and mechanical loads encountered when machining Stahl and rostfreier Stahl, while also providing improved resilience when cutting difficult high‑temperature alloys and Titan. For production planners this translates into more consistent tool life and fewer unscheduled interruptions, supporting predictable cycle times and stable throughput. Predictable chip formation and a secure cutting edge for fewer reworks The integrated 7N‑A57 chipbreaker promotes controlled chip formation under the typical cutting conditions of drilling and boring, reducing the risk of built‑up edge and erratic chip behaviour. Effective chip control reduces the need for secondary cleaning and minimises the chance of surface damage, which in turn lowers scrap rates and rework. A stable cutting edge is central to maintaining dimensional accuracy throughout batch production, and this insert’s geometry is selected to balance cutting forces and edge strength for reliable performance in demanding operations. Process efficiency and cost‑effectiveness through reduced tool changes As an indexable solution, this drilling/boring insert supports quick replacement and simple tool management, contributing to improved uptime on machining centres. The combination of long tool life and consistent performance enhances cost‑effectiveness by reducing insert consumption and maintenance intervals. For engineers and buyers, the practical advantage is a reduction in total process cost per hole or bore, achieved without compromising surface finish or dimensional stability. Application guidance and compatibility to simplify selection The insert is specified for material groups P, M and S, reflecting suitability for unalloyed and alloyed Stahl, rostfreier Stahl, and heat‑resistant superalloys including Titan. Its geometry and Tiger·tec Gold coating make it particularly useful where a balance between wear resistance and edge toughness is required. For integration into existing toolholders, confirm insert seat and clamping compatibility using the ISO designation P2841S‑7N‑A57 WSP45G; the combination of grade and chipbreaker should be matched to expected cutting speeds and feeds to achieve the best trade‑off between productivity and tool life. For machining teams seeking robust, process‑stable performance from Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored application support and stock availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: P2841S-7N-A57-WSP45G-WALTER Designation: P2841S-7N-A57 WSP45G Product type: drilling/boring indexable insert Manufacturer: Walter Tools Facts Grade family: Tiger·tec Gold Sort: WSP45G Chipbreaker: 7N-A57 Material code: P / M / S Special features Coating: Tiger·tec Gold (PVD) Substrate: coated cemented carbide Application focus: versatile for milling‑derived grades used in drilling/boring Suitable materials: Stahl, rostfreier Stahl, superalloys/Titan ISO designation included on product label FAQ What materials can this insert machine reliably? The P2841S‑7N‑A57 WSP45G insert is specified for P, M and S groups—suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys such as Titan when appropriate cutting parameters are applied. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and maintains cutting geometry, which helps the insert deliver consistent tool life and repeatable results in series production. What is the role of the 7N‑A57 chipbreaker? The 7N‑A57 chipbreaker is designed to produce controlled chip shapes during drilling and boring, improving chip control and reducing the likelihood of built‑up edge and surface damage. Is this insert suitable for high‑temperature alloys and titanium? Yes; the WSP45G grade and geometry are engineered to cope with the demands of S‑group materials, including superalloys and Titan, offering heat resistance and edge stability under challenging conditions. Which designation should be quoted when ordering? Please refer to the ISO designation P2841S‑7N‑A57 WSP45G and the SKU P2841S‑7N‑A57‑WSP45G‑WALTER for unambiguous ordering. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-7N-A57 WXP40 Wendeplatten - Walter Tools
Take advantage of a durable, uncoated carbide grade and a precisely shaped chipbreaker to improve drilling and reboring stability. The combination of the WXP40 cutting grade and the 7N-A57 chipbreaker supports consistent chip control and repeatable performance; order via Metav Werkzeuge or consult our technical team for application matching. P2841S-7N-A57 WXP40 — Indexable insert for drilling and reboring (Walter Tools) P2841S-7N-A57 WXP40 is an indexable cutting insert intended for drilling and reboring operations; it features the open Walter grade series and a 7N‑A57 chipbreaker for controlled chip formation. Uncoated carbide WXP40 for consistent edge 7N‑A57 chipbreaker for controlled chip formation Suited for drilling and reboring indexable applications Walter Tools open-grade series, catalogue-dependent Consistent cutting performance to raise process reliability The WXP40 grade is an uncoated carbide designed for reliable edge behaviour in a variety of turning and drilling contexts; its open-grade designation means users should consult the product matrix to confirm material compatibility. Combined with the 7N‑A57 chipbreaker, the geometry promotes predictable chip detachment and reduces the risk of chip accumulation in confined bores. By focusing on process stability and repeatability, this insert helps maintain cycle times and reduces scrap rates, which supports a measurable improvement in production throughput. Clear chip control that supports efficient machining The insert’s chipbreaker is engineered to manage chip form during plunge and peripheral cutting phases typical of drilling and reboring. Controlled chip formation minimises interruptions from manual chip clearing and lowers the likelihood of tool or workpiece damage. This yields more consistent surface finishes and fewer interrupted cycles. For workshops seeking to optimise machining windows, the combination of a precision insert geometry and the WXP40 substrate offers a pragmatic balance between cutting-edge retention and reliable wear characteristics. Practical use and handling for machining shops Designed for indexable drilling and reboring holders, the insert fits common toolholders where the P2841S family is specified. Users benefit from straightforward indexing to expose a fresh cutting edge and from the inherent economy of replaceable inserts. Although the grade is uncoated, its behaviour in mixed workloads can be advantageous where coating might impair chip evacuation; nevertheless, checking the product matrix for recommended workpiece materials is advised before series deployment. Choose this insert when the priority is consistent chip control and dependable performance under repetitive bore machining. Contact Metav Werkzeuge for availability or to discuss which applications best suit the Walter Tools WXP40 grade and 7N‑A57 chipbreaker — technical consultation and order support are available from Metav Werkzeuge. Technical Data Article number: P2841S-7N-A57-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-7N-A57 WXP40 Walter Tools Product type: Indexable insert for drilling and reboring Grade: WXP40 Chipbreaker: 7N-A57 Facts No numerical machining parameters provided No dimensional data provided Special features Uncoated carbide grade (catalogue-dependent) Walter open-grade series Designed for controlled chip formation Intended for indexable drilling/reboring applications Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The WXP40 grade is an uncoated carbide whose material suitability should be verified in the product matrix; consult the specifications to confirm performance on specific workpiece materials. How does the 7N‑A57 chipbreaker improve drilling? The 7N‑A57 chipbreaker promotes predictable chip shapes and evacuation during drilling and reboring, reducing the need for manual intervention and supporting more stable cycle times. Can the insert be indexed when the edge is worn? Yes, the insert is designed as an indexable cutting element; indexing exposes a fresh cutting edge and extends tool life compared with single‑edge inserts. Where to get technical advice for selecting the correct grade? Metav Werkzeuge provides application support and can advise on whether the Walter Tools WXP40 grade with the 7N‑A57 chipbreaker matches the intended machining task. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-7N-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating in combination with the WKP35S grade and the 7N-E57 chipbreaker to secure consistent wear resistance and controlled chip formation when enlarging or finishing holes in steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. P2841S-7N-E57 WKP35S drilling/reaming indexable insert – Tiger·tec Silver (Walter Tools) The P2841S-7N-E57 WKP35S is a coated carbide indexable insert optimised for holemaking and hole-enlarging operations on steel and cast iron, offering a balance of wear resistance and reproducible cutting performance. Tiger·tec Silver coating for wear resistance Optimised 7N-E57 chip control Designed for steel and cast iron (P/K) Coated carbide grade WKP35S for long tool life Increase productivity with a wear-resistant holemaking solution The combination of Tiger·tec Silver technology and the WKP35S grade delivers a stable cutting edge and extended tool life, reducing downtime for insert changes and lowering per-part costs in volume production. The insert’s coated carbide substrate is engineered to withstand the thermal and mechanical loads typical of holemaking in steel and cast iron, so machining parameters can be pushed for shorter cycle times without sacrificing component quality. By improving flank and crater wear behaviour, this geometry supports constant cutting forces and predictable tool-change intervals, which benefits process planning and overall shop-floor efficiency. Controlled chips and consistent surface quality for holemaking The 7N-E57 chipbreaker is designed to break and evacuate chips reliably during drilling and reaming operations, especially where chip shape and evacuation affect component integrity and tool life. Predictable chip control reduces the risk of recutting, scoring or built-up edge on internal surfaces, resulting in repeatable surface finish and dimensional stability. For users less familiar with chipbreaker terminology: the chipformer’s geometry channels and fractures the swarf so that it clears from the bore, lowering the chance of tool jamming and improving reproducibility across batches. Application guidance and compatibility for process planning This insert is tailored to the ISO P and K workpiece groups, meaning it is suitable for a broad range of unalloyed and alloyed steel grades as well as a variety of cast iron materials. The WKP35S grade is a coated hardmetal formulation optimised for the thermal and abrasive conditions encountered in these materials, offering a compromise between wear resistance and toughness. In practice, the insert excels in standard and slightly elevated cutting-speed ranges; when planning cuts, consider flank-wear limits and machine rigidity to make the most of the insert’s potential. For interrupted cuts or unstable clamping, review feed and speed reductions to preserve the cutting edge and maintain consistent hole geometry. For productive and reliable holemaking with the Tiger·tec Silver WKP35S grade, contact Metav Werkzeuge for tailored technical advice and swift supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: P2841S-7N-E57-WKP35S-WALTER Designation: P2841S-7N-E57 WKP35S Product type: drilling/reaming indexable insert Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 7N-E57 Material group: P / K Brand: Walter Tools Facts SKU / UID: P2841S-7N-E57-WKP35S-WALTER Applicable ISO groups: P, K Special features Coating: Tiger·tec Silver Substrate: coated carbide (WKP35S) Suitable for: steel (P), cast iron (K) Typical applications: holemaking, hole enlargement, reaming Manufacturer brand: Walter Tools FAQ Which materials can be machined with this insert? The insert is suitable for machining steel (ISO P) and cast iron (ISO K); the WKP35S grade and Tiger·tec Silver coating are tuned to those groups. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating improves wear resistance and thermal stability, extending the service life of the WKP35S coated carbide insert under the heat and abrasion typical of holemaking. How does the 7N-E57 chipbreaker affect performance? The 7N-E57 chipbreaker ensures controlled chip formation and evacuation during drilling and reaming, which supports consistent surface finish and reduces the risk of tool jamming. Is this insert suitable for interrupted cuts or unstable conditions? The WKP35S grade offers a balance of toughness and wear resistance; for highly interrupted cuts or poor rigidity, adjust feeds and speeds to reduce shock and preserve the cutting edge. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
P2841S-7N-E57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the WSP45G grade for consistent chip control and extended tool life in demanding drilling and boring operations; order directly via Metav Werkzeuge or request application advice from the consultants. P2841S-7N-E57 WSP45G – Drilling/boring indexable insert with 7N‑E57 chipformer – Walter Tools P2841S-7N-E57 WSP45G is a drilling and boring indexable insert engineered for high‑productivity metallic machining, especially where stable cutting edges and reliable chip control are required. Tiger·tec Gold PVD coating for longer tool life Versatile for Stahl, rostfreier Stahl and superalloys 7N‑E57 chipformer for stable chip control Productive wear resistance for extended tool life The Tiger·tec Gold coating combined with the WSP45G coated‑carbide grade provides a balance of hardness and toughness that reduces flank wear under continuous cutting. This results in longer tool life and fewer insert changes, which supports uninterrupted production runs. The PVD coating improves thermal stability at the cutting edge, so the insert maintains its geometry under higher cutting temperatures typically encountered in deep drilling and boring cycles. Consistent chip control and improved surface finish A key operational advantage is the 7N‑E57 chipformer, designed to produce predictable chip shapes and evacuation behaviour. Stable chip formation reduces the risk of built‑up edge and workpiece damage, leading to better surface quality and fewer secondary operations. In practice, this means more consistent bore tolerances and surface integrity when machining demanding components. Broad material capability for mixed‑material shops The grade is specified for material groups P, M, S, which covers unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys/titanium. Such versatility allows a single insert family to be deployed across different components without frequent tool changes. The result is simplified inventory management and reliable performance when the workpiece mix includes both tough, heat‑generating alloys and conventional steels. Practical benefits for day‑to‑day machining The indexable format of this drilling/boring insert enables economical edge management: worn edges can be rotated or replaced without discarding the entire tool body, lowering tooling cost per hole. The ISO designation and chipbreaker code make integration into tool lists and CAM setups straightforward, aiding reproducible setup and process documentation. The specification supports shops seeking predictable production rhythms and reduced process variability. Contact Metav Werkzeuge for tailored inserts and application recommendations for Walter Tools products; send application details to info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: P2841S-7N-E57-WSP45G-WALTER Designation: P2841S-7N-E57 WSP45G Product type: Drilling/boring indexable insert Grade: WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Core specifications Applicable material groups: P / M / S Chipformer: 7N‑E57 Material composition: coated carbide (PVD) UID: P2841S-7N-E57-WSP45G-WALTER Special features Tiger·tec Gold PVD coating Suited for Stahl, rostfreier Stahl and superalloys/titanium Designed for stable chip formation and edge integrity Indexable insert format for economical edge changes FAQ Which materials can this insert machine reliably? The P2841S-7N-E57 WSP45G insert by Walter Tools is specified for the ISO groups P, M and S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. What advantage does the Tiger·tec Gold technology provide? Tiger·tec Gold in the WSP45G grade improves thermal stability and wear resistance, so the Walter Tools insert maintains cutting‑edge integrity for longer in demanding drilling and boring operations. How does the 7N‑E57 chipformer affect production? The 7N‑E57 chipformer offers controlled chip breaking and evacuation, which reduces the chance of built‑up edge and enhances bore finish when using the P2841S-7N-E57 insert from Walter Tools. Is the insert suitable for mixed production runs? Yes, the WSP45G grade is versatile across P/M/S groups and allows the same insert family to be used on different materials, helping streamline tooling in mixed‑material production. What practical benefits does the indexable format offer? Indexable inserts such as the P2841S-7N-E57 WSP45G enable rotated or replaced cutting edges without changing the tool body, lowering tooling costs and minimising machine downtime. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-7N-E57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control and the WXP40 uncoated carbide grade for consistent, productive drilling and boring operations; order the insert via Metav Werkzeuge or request advice from our technical consultants for system compatibility. P2841S-7N-E57 WXP40 – Drilling and boring indexable insert by Walter Tools, chipbreaker 7N‑E57 The P2841S-7N-E57 WXP40 is an indexable insert developed for drilling and boring applications where reliable chip formation and repeatable cutting performance are required in a flexible production environment. Walter grade WXP40 uncoated carbide Chipbreaker 7N‑E57 for controlled chips Open series for versatile use Designed for drilling and boring inserts Performance that keeps production moving The insert is engineered to support productive machining through a chipbreaker geometry optimised for drilling and bore enlargement tasks. The 7N‑E57 chipbreaker promotes consistent chip formation, which reduces interruptions during automatic cycles and helps maintain stable cutting conditions. Manufactured in the WXP40 uncoated carbide grade, the insert offers predictable wear behaviour and is suited where an uncoated cutting edge delivers the required balance between toughness and hardness. The result is a component that contributes to fewer tool changes and improved process throughput in high-mix or repeat production settings. Clear guidance on material application and process planning The cutting-grade selection follows Walter Tools’ open-series philosophy: the WXP40 grade is an uncoated cemented carbide whose specific suitability depends on the workpiece and the selected operating parameters. For precise application, the product matrix should be consulted to match cutting data and workpiece material. Explaining technical terms: an uncoated carbide substrate provides inherent toughness and thermal stability without an additional thin-film layer, which can be advantageous for interrupted cuts or applications where coating adhesion may be a concern. This factual approach supports reliable planning and reduces uncertainty in process design. Compatibility and toolholding benefits As an indexable insert for drilling and boring, the geometry and designation align with established Walter Tools systems, enabling straightforward integration into holders designed for the P2841S family. The indexable insert format simplifies replacement and reduces spindle downtime compared with solid tooling options. The open-series design offers flexibility for adapting insert geometry to specific diameter and depth requirements, while the emphasis on chip control keeps bore quality consistent and lowers the risk of rework. Why this grade is a dependable choice in production Choosing an insert from a recognised toolmaker like Walter Tools brings the advantages of tested material grades and documented performance characteristics. The focus on stable chip formation and repeatable cutting edge behaviour supports process reliability — a decisive factor where production consistency affects downstream operations. The combination of an engineered chipbreaker and the WXP40 grade creates a balanced solution for many drilling and boring tasks, offering both technical transparency and practical benefits in everyday machining. For technical clarification on the Walter Tools P2841S‑7N‑E57 WXP40 insert and to confirm compatibility with specific toolholders or machining centres, contact Metav Werkzeuge for tailored advice and current availability at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: P2841S-7N-E57-WXP40-WALTER Designation: P2841S-7N-E57 WXP40 Product type: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Manufacturer: Walter Tools Grade: WXP40 Chipbreaker: 7N‑E57 Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig UID: P2841S-7N-E57-WXP40-WALTER Facts No measurable specifications provided in the data set Special features Uncoated carbide grade WXP40 Chipbreaker geometry 7N‑E57 for controlled chips Open series for flexible application Intended for drilling and boring operations Suitability to be checked via product matrix FAQ What is the primary application for this insert? The insert is intended for drilling and boring operations; the P2841S‑7N‑E57 WXP40 insert provides controlled chip formation for such tasks. Is the WXP40 grade coated or uncoated? The WXP40 grade is an uncoated carbide grade as indicated in the product series description. How does the 7N‑E57 chipbreaker affect machining? The 7N‑E57 chipbreaker promotes consistent chip formation and reduces interruptions, improving bore quality and process stability when using the insert. Can this insert be used for all materials? Material suitability varies; the product matrix should be consulted to confirm whether the WXP40 grade is appropriate for a specific workpiece material and operating conditions. Which tool systems is the insert compatible with? The geometry and designation align with Walter Tools’ P2841S-family holders and similar systems designed for drilling/boring indexable inserts. Manufacturer: Walter Tools; part of the Walter AG group. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The offered article is an original, factory-new product of the manufacturer.
P2841S-7N-E67 WKP35S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, the WKP35S cutting grade and a proven chipbreaker geometry delivers extended tool life and stable chip formation for demanding drilling and bore-enlarging operations; order the insert via Metav Werkzeuge or contact the consultants for tailored cutting data. P2841S-7N-E67 WKP35S drilling/bore-enlarging indexable insert – Tiger·tec Silver, for steel & cast iron (Walter Tools) The P2841S-7N-E67 WKP35S is a drilling and bore-enlarging indexable insert engineered for productive machining of steel and cast iron components in industrial production environments. Tiger·tec Silver coating for long tool life WKP35S coated carbide grade Chipbreaker 7N-E67 for controlled chip formation Designed for steel and cast iron machining Longer tool life through optimised coating and grade The insert combines the Tiger·tec Silver coating with the WKP35S coated carbide grade to reduce abrasive and adhesive wear during interrupted and continuous drilling cycles. The surface treatment improves heat resistance and reduces flank wear, which translates into longer intervals between indexings and fewer tool changes. For production-focused workshops this means more uptime and a predictable wear pattern that supports process planning and consistent output. Stable chip control for safer, faster cycles A dedicated chipbreaker, the 7N‑E67 geometry, is specified to shape and control chips in both short-breaking and semi-continuous forms. This results in reliable evacuation from holes and bores, reduced risk of entanglement and fewer interruptions caused by poor chip behaviour. When machining both steel (ISO group P) and cast iron (ISO group K) the chip control reduces coolant pressure spikes and helps maintain component surface quality without complex process adjustments. Practical use and compatibility with common materials Designed as an indexable solution for drilling and bore-enlarging operations, the insert is suited for standard and high-productivity machining centres. The cutting grade and coating combination is balanced for a wide material range, focusing on steel and cast iron, which are the primary suitable materials for this geometry and grade. The term "coated carbide" here indicates a base carbide substrate with a multi-layer coating system optimised for thermal stability and wear resistance, explained in straightforward terms for production planners and purchasing managers. Process reliability and productivity advantages Choosing a branded solution from a recognised toolmaker supports repeatable results across batches and shifts. The insert’s construction and geometry prioritise wear resistance and operational process security, helping to reduce scrap rates and rework. For manufacturing environments with mixed-series production, the consistency of cutting behaviour offered by this grade simplifies tooling lists and streamlines inventory management while maintaining surface finish and dimensional stability. Contact Metav Werkzeuge today for machine-specific recommendations or detailed cutting data; Metav Werkzeuge can advise on insert selection, grade suitability and supply options – eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: P2841S-7N-E67-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-7N-E67 WKP35S Walter Tools Product type: Drilling/bore-enlarging indexable insert Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: 7N-E67 Material group: P / K Manufacturer: Walter Tools Facts Compatible material groups: P (steel), K (cast iron) Coating technology: Tiger·tec Silver Geometry designation: 7N-E67 Cutting substrate: coated carbide Special features Coated carbide cutting grade WKP35S Optimised for steel and cast iron machining Stable chip formation and evacuation Designed for drilling and bore-enlarging applications Brand: Walter Tools FAQ What materials is this insert intended for? The insert is specified for steel (ISO group P) and cast iron (ISO group K); the grade WKP35S is optimised for those material families. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases thermal resistance and reduces flank and crater wear on the WKP35S grade, extending cutting life and stabilising cutting forces. Is the chipbreaker suitable for deep-hole drilling? The 7N‑E67 chipbreaker is designed for controlled chip formation and reliable evacuation, which supports deeper bore operations when combined with appropriate coolant and evacuation strategies. Can this insert be used for stainless or other exotic alloys? The data supplied specifies suitability for steel and cast iron; compatibility with stainless or high-alloy materials is not stated and should be verified with cutting data for those specific alloys. Who manufactures the insert and what can be expected from the brand? Walter Tools supplies this grade and geometry; the product is manufactured to the brand’s industrial standards for dimensional accuracy and repeatable cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The described article is offered as original, factory-new goods from the stated manufacturer.
P2841S-7N-E67 WSP45G Wendeplatten - Walter Tools
Order the indexable insert for drilling and reaming where a combination of durable coating technology and versatile material compatibility ensures fewer tool changes and reliable chip formation; purchase directly via Metav Werkzeuge or consult our specialists for application-specific advice. Bohr-/Aufbohrwendeschneidplatte P2841S-7N-E67 WSP45G – indexable insert with Tiger·tec Gold coating (Walter Tools) A robust indexable insert designed for drilling and bore-up operations, combining the WSP45G PVD grade with a 67° cutting geometry for versatile use in demanding machining tasks. Tiger·tec Gold coated PVD grade WSP45G Suitable for steel, stainless steel, superalloys Stable cutting edge, extended tool life Cutting geometry: 67° clearance angle Improve process reliability through controlled chip formation and edge stability The Tiger·tec Gold grade delivers a stable cutting edge that significantly improves chip control during drilling and bore-up operations. The WSP45G composition is optimised for the heat and strain typical of cutting steel and stainless materials, reducing the risk of built-up edge and unplanned interruptions. With a consistent chipbreaker geometry, the insert supports predictable machining behaviour, which in turn reduces scrap rates and increases overall equipment effectiveness. This leads to measurable productivity gains in serial and job-shop environments where repeatability matters. Reduce downtime with a wear-resistant coating and predictable performance The PVD-based Tiger·tec Gold coating enhances wear resistance and edge strength, translating into longer tool life and fewer index changes. The insert’s combination of a tough substrate and a hard, thermally stable top layer helps to withstand the temperatures generated in high-engagement drilling, especially in tougher materials. For production planners, this means reduced tooling logistics and lower frequency of insert replacement, which simplifies scheduling and lowers indirect machining costs without compromising surface quality. One solution for demanding material groups: P / M / S compatibility Specifically developed for the ISO material groups P (steel), M (stainless steel) and S (superalloys and titanium), the insert offers versatility across a wide range of components. The geometry with a 67° characteristic supports effective cutting forces and clearance for chip evacuation in deeper holes. For components requiring high dimensional stability or made from heat-resistant alloys, the insert’s wear behaviour and edge stability preserve hole quality and reduce the need for subsequent finishing. This adaptability makes it a reliable choice for mixed-production shops and aerospace or energy-sector applications. For application advice or to secure the P2841S-7N-E67 WSP45G insert from Walter Tools, contact Metav Werkzeuge for targeted guidance and procurement support. Technical data SKU: P2841S-7N-E67-WSP45G-WALTER Product designation: P2841S-7N-E67 WSP45G (indexable insert) Series: Tiger·tec Gold Brand: Walter Tools Facts Coating type: PVD (Tiger·tec Gold) Cutting geometry angle: 67° Material groups: P / M / S Special features Grade: WSP45G (coated carbide) Chipbreaker: 7N-E67 Application: drilling and bore-up operations Optimised for steel, stainless steel, superalloys and titanium FAQ What materials can this insert machine reliably? The P2841S-7N-E67 WSP45G insert is designed for P (steel), M (stainless steel) and S (superalloys and titanium) materials, offering stable cutting behaviour across these groups. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating increases wear resistance and edge stability, which leads to longer tool life and more consistent surface quality during drilling and reaming operations. Is the 67° geometry suitable for deep-hole drilling? Yes, the 67° characteristic of the chipbreaker and clearance design supports effective chip evacuation and cutting force distribution in many bore-up and through-hole applications. Which production environments benefit most from this insert? Job shops and production lines that require versatile, repeatable performance in mixed materials—especially where downtime and tool-change frequency must be minimised—will gain the most from this insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; info@walter-tools.com The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the stated manufacturer.
P2841S-7N-E67 WXP40 Wendeplatten - Walter Tools
P2841S-7N-E67 WXP40 Bohr-/Aufbohrwendeschneidplatte von Walter Tools Die P2841S-7N-E67 WXP40 ist eine unbeschichtete Hartmetall-Wendeplatte für universelle Bohr- und Aufbohranwendungen in der Zerspanung und richtet sich an produktiv orientierte Werkstätten. Universelle Aufbohr- und Bohranwendung Unbeschichtetes Hartmetall für hohe Standzeit Optimierter Spanbrecher 7N-E67 für zuverlässige Spanbildung Walter Schneidstoffsorte WXP40 für breite Werkstoffabdeckung Dauerhaftigkeit durch passende Werkstoffwahl Für produktive Bearbeitungsprozesse bietet die Wendeplatte eine unbeschichtete Hartmetall-Sorte, die für stabile Schneidkante und wirtschaftliche Standzeiten ausgelegt ist. Die Wahl eines unbeschichteten Hartmetalls reduziert Ausschuss durch planbare Verschleißcharakteristik und vereinfacht die Nachschärfbarkeit. Das wirkt sich direkt auf die Produktionskosten aus: geringere Wechselintervalle und vorhersagbare Werkzeugkosten sorgen für planbare Fertigungsprozesse ohne unnötige Stillstände. Verbesserte Spanbildung und Prozesssicherheit Mit dem Spanbrecher 7N-E67 sorgt die Platte für definierte Spanbildung und gute Abfuhr bei unterschiedlichen Zerspanungsbedingungen. Ein Spanbrecher formt den Span so, dass die Kühlschmierstoffzufuhr und die Späneabfuhr optimiert werden, was die Standzeit der Schneidkante verlängern kann. Anwender sollten die konkrete Werkstoffmatrix prüfen, da die Sortenbeschreibung angibt, dass die Werkstoffeignung anhand der Produktmatrix zu verifizieren ist. Einsatzprofil und wirtschaftlicher Nutzen Die Platte eignet sich besonders für Unternehmen, die zuverlässige und produktive Bohr- und Aufbohrzyklen benötigen, etwa Lohnfertiger und Serienfertigungen. Durch die Kombination aus WXP40-Sorte und optimiertem Spanformer lässt sich die Maschinenauslastung steigern, weil Rüstzeiten reduziert und Bearbeitungsschritte stabilisiert werden. Die Bauart bietet eine gute Grundlage, um Prozesse zu standardisieren und Fertigungsqualität langfristig zu sichern. Empfehlung: Für wirtschaftliche Aufbohr- und Bohranwendungen die WXP40-Sorte von Walter Tools anfragen und bei Bedarf die passende Produktmatrix bei Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 klären Produktmerkmale Artikelnummer: P2841S-7N-E67-WXP40-WALTER Marke: Walter Tools Produktart: Bohr-/Aufbohrwendeschneidplatte Bezeichnung: P2841S-7N-E67 Wendeplattenbezeichnung: P2841S-7N-E67 WXP40 Baureihe: Walter Schneidstoffsorte - Serie offen Sorte: WXP40 Material: Katalogabhängig Fakten Besonderheiten Spanbrecher: 7N-E67 — optimierter Spanformer für stabile Spanbildung Schneidstoffklasse: unbeschichtetes Hartmetall Sortenhinweis: Werkstoffeignung anhand der konkreten Produktmatrix prüfen Baureihenangabe: Walter Schneidstoffsorte - Serie offen FAQ Für welche Bearbeitungsaufgaben eignet sich die Platte besonders? Die Bohr-/Aufbohrwendeschneidplatte P2841S-7N-E67 WXP40 von Walter Tools ist für Bohr- und Aufbohranwendungen konzipiert und bietet durch den Spanbrecher 7N-E67 zuverlässige Spanabfuhr bei Serienprozessen. Ist die Platte beschichtet und welche Vorteile hat das Material? Die Wendeplatte verwendet unbeschichtetes Hartmetall; das unbeschichtete Material ermöglicht planbare Verschleißverläufe und vereinfachte Nachbearbeitung, was in vielen Fertigungsprozessen wirtschaftliche Vorteile bringt. Wie lässt sich die Werkstoffeignung prüfen? Die Sortenbeschreibung der Walter Schneidstoffsorte WXP40 empfiehlt die Prüfung der Werkstoffeignung anhand der konkreten Produktmatrix; dadurch wird die optimale Kombination aus Schnittdaten und Werkstoff sichergestellt. Kann die Platte in Serienfertigung den Rüstaufwand reduzieren? Ja, durch stabile Spanbildung und vorhersehbare Standzeiten trägt die P2841S-7N-E67 WXP40 zur Reduzierung von Rüst- und Stillstandzeiten bei, was die Maschinenauslastung verbessert. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-7N-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver durability, precise chip control and an indexable format optimised for drilling and boring to maintain consistent production output. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. P2841S-7N-F57 WKP35S drilling/boring indexable insert for Steel and Cast iron – Walter Tools The P2841S-7N-F57 WKP35S is an indexable cutting insert designed for drilling and boring applications, optimised to machine steel and cast iron with high process stability. Tiger·tec Silver coating for extended wear life Chipbreaker 7N‑F57 for controlled chip formation Suitable for steel (P) and cast iron (K) machining Indexable design for efficient drilling and boring Longer tool life and predictable production gains The insert is part of the Tiger·tec Silver family and is engineered to deliver wear resistance under continuous machining. The advanced coating and grade combination reduces flank and crater wear, which prolongs effective tool life and decreases downtime for insert changeover. For production environments where repeatability matters, this translates into fewer interruptions and a more stable process window, helping to protect cycle times and overall throughput. More consistent chip control for safer machining Equipped with the chipbreaker 7N‑F57, the insert supports chip control patterns that suit both short and semi-continuous chips commonly encountered in steel and cast iron. The geometry manages heat development and promotes predictable chip segmentation, lowering the risk of built-up edge and improving surface integrity. Improved chip formation reduces manual chip handling and contributes to a cleaner, safer machining area while maintaining dimensional accuracy. Practical efficiency: fewer operations, reliable results The indexable design enables rapid replacement and compatibility with standard holders that accept the P2841S geometry, simplifying tool inventory and set-up changes. The grade WKP35S is a coated carbide formulation tailored for the thermal and abrasive demands of steel and cast iron, offering a balance between toughness and hardness. These features support efficient drilling and boring routines, reducing the number of resharpens or insert swaps required and enhancing overall cost-efficiency in the production cycle. For application advice or to ensure the correct geometry and grade for a specific operation, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 for personalised guidance and ordering. Technical Data Article number: P2841S-7N-F57-WKP35S-WALTER Designation: P2841S-7N-F57 WKP35S Product type: drilling/boring indexable insert Manufacturer: Walter Tools Core specifications No measurable numeric data provided in source Special features Coating/series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: 7N‑F57 Material suitability: Steel (P), Cast iron (K) Application: drilling and boring operations Material group: P / K FAQ What materials can be machined with this insert? The P2841S-7N-F57 WKP35S is designed for machining steel (P) and cast iron (K) and offers tailored performance for the thermal and abrasive characteristics of these groups. Which coating technology does this grade use? The insert utilises the Tiger·tec Silver technology; the combination of grade and coating enhances wear resistance and supports longer service life in demanding production cycles. How does the chipbreaker affect machining performance? The 7N‑F57 chipbreaker promotes controlled chip formation and improved chip evacuation, which helps maintain dimensional stability and reduces the likelihood of built-up edge when working with steel and cast iron. Is the insert suitable for high-volume production? Yes, the insert’s coated grade and robust geometry are aimed at delivering consistent performance and extended tool life, making it suitable for repetitive, high-volume drilling and boring tasks. How can compatibility with toolholders be ensured? Compatibility follows the P2841S insert geometry; toolholders and adaptors that accept this designation will be compatible—refer to holder specifications for confirmation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter Tools brand is part of the Walter AG group and is associated with leading precision tooling for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered article is an original, factory-new product of the manufacturer.
P2841S-7N-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSP45G grade for stable edge life and consistent chip control in holemaking operations; order the insert directly via Metav Werkzeuge or consult our specialists for application support. P2841S-7N-F57 WSP45G — indexable insert for drilling and boring, Tiger·tec Gold, Walter Tools The P2841S-7N-F57 WSP45G is an indexable insert engineered for precision drilling and bore enlargement in demanding materials, offering a PVD-coated cutting surface and a dedicated 7N‑F57 chipformer for controlled swarf formation. Tiger·tec Gold PVD coating Versatile for steel, stainless and superalloys Stable cutting edge for tough materials Chipformer 7N‑F57 for reliable chip control Highly efficient holemaking for mixed-material production The coated carbide grade utilises Tiger·tec Gold PVD technology and the WSP45G specification to deliver a balance of wear resistance and toughness. This combination is designed to reduce flank wear while avoiding premature chipping when machining steel, stainless steel and heat‑resistant superalloys. The result is more predictable tool life and fewer unplanned stops, which supports higher overall throughput in batch and single‑piece flow operations. Predictable chip control and edge stability for safer processes The integrated 7N‑F57 chipformer is created to shape chips consistently during drilling and boring, reducing the risk of entanglement and improving evacuation from the hole. Stable edge geometry and a PVD surface treatment mean the cutting edge is protected against abrasive wear and thermal loading; this leads to steadier hole quality and reduced need for frequent index changes. For processes sensitive to surface finish and dimensional repeatability, these features contribute directly to lower scrap rates. Simple process integration with measurable benefits As an indexable insert for drilling and boring, the component is intended for fast seat replacement and minimal spindle downtime. The grade’s versatility across ISO groups P / M / S simplifies tooling lists and inventory management when multiple materials are encountered in production. In practical terms, the insert enables consistent cycle times and better utilisation of machine capacity, so line planners can rely on documented cutting behaviour and repeatable results rather than continual trial adjustments. For procurement and application advice on the Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and ordering assistance Technical data Article number: P2841S-7N-F57-WSP45G-WALTER Designation: P2841S-7N-F57 WSP45G Type: Indexable insert for drilling and boring Manufacturer: Walter Tools Grade: WSP45G Series: Tiger·tec Gold Chipformer: 7N‑F57 Material applicability: P / M / S Product type (original): Bohr-/Aufbohrwendeschneidplatte Core data SKU / UID: P2841S-7N-F57-WSP45G-WALTER / P2841S-7N-F57-WSP45G-WALTER Applicable ISO material groups: P, M, S Coating type: PVD (Tiger·tec Gold) Special features Coated carbide grade (PVD coated) Designed for drilling and bore enlargement Optimised chip control via 7N‑F57 chipformer Balanced wear resistance and toughness for mixed materials Suitable for use in steels, rostfreier Stahl and high‑temperature alloys FAQ What materials is this insert suitable for? The P2841S-7N-F57 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for machining steels, rostfreier Stahl and heat‑resistant superalloys including titanium alloys. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold is a PVD coating that increases surface hardness and thermal resistance; applied to the P2841S-7N-F57 WSP45G, it helps reduce wear and extend edge life under elevated cutting temperatures. What is the role of the 7N‑F57 chipformer? The 7N‑F57 chipformer is engineered to produce controlled chip shapes during drilling and boring, improving evacuation from the hole and reducing the likelihood of chip build‑up or jamming. Can the insert be used across different machines and holders? As an indexable insert for drilling and boring, the geometry is intended for standard toolholders compatible with this insert designation; toolholder verification is recommended before mounting. How does this insert support process reliability? By combining a stable cutting edge with a wear‑resistant coating and a dedicated chipformer, the insert helps deliver stable hole quality and predictable tool life, supporting consistent production results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the brands listed. The offered item is original and factory‑new.
P2841S-7N-F57 WXP40 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of high productivity, predictable chip control and reliable edge stability offered by this indexable insert; its 7N-F57 chipbreaker and WXP40 uncoated cemented carbide grade support efficient drilling and reaming operations. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. P2841S-7N-F57 WXP40 — Drill/reaming indexable insert, uncoated cemented carbide (Walter Tools) A practical choice for machining operations that require controlled chip formation and stable cutting edges, the P2841S-7N-F57 WXP40 is designed for productive drilling and reaming tasks across a broad range of component materials. Drill/reaming insert P2841S-7N-F57 Chipbreaker 7N-F57 for controlled chips Uncoated cemented carbide WXP40 grade Walter open-series for broad applications Increased productivity through consistent chip control The combination of the 7N-F57 chipbreaker and the WXP40 uncoated cemented carbide grade delivers predictable chip formation and reduced interruption from chip-related issues. For operations where process reliability and throughput matter, this indexable insert translates into fewer machine stoppages and a smoother production flow. The chipbreaker geometry is engineered to direct chips away from the cutting zone, which reduces recutting and improves heat management during high-material-removal-rate cycles. This results in a tangible gain in machining efficiency without the need for special coolant strategies. Broad application and material handling explained Although the insert is supplied in an uncoated cemented carbide composition, the open-series design supports versatile use across many workshop applications; suitability for specific workpiece materials should be verified against the product matrix. The uncoated carbide core provides a stable cutting edge and wear resistance under standard drilling and reaming conditions. For engineers and purchasing specialists, this means an insert that balances edge life with economical performance, especially in environments where coatings offer no clear advantage or where intermittent sharpening and edge reconditioning are standard practice. Practical handling and integration into production The insert’s designation and chipbreaker code simplify tool selection and process planning. The clear marking of P2841S-7N-F57 and the WXP40 grade enables straightforward inventory management and compatibility checks with existing toolholders. When fitting the insert, ensure correct seating and torque for clamping screws to maintain repeatable run-out and surface finish. For teams transitioning new inserts into serial production, updating process sheets with the chipbreaker orientation and recommended speeds will help achieve immediate, repeatable results. For any uncertainty about tooling parameters or surface finish targets, technical guidance is available. Contact Metav Werkzeuge for application advice or to request an order for the P2841S-7N-F57 WXP40 insert; experienced advisers are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number / SKU: P2841S-7N-F57-WXP40-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte P2841S-7N-F57 WXP40 Walter Tools Product type: Drill/reaming indexable insert Facts Grade: WXP40 Chipbreaker: 7N-F57 Series: Walter Schneidstoffsorte - Serie offen Special features Material: Uncoated cemented carbide (catalog dependent) Designation: P2841S-7N-F57 ISO designation: P2841S-7N-F57 WXP40 Brand: Walter Tools FAQ What is the primary function of the 7N-F57 chipbreaker? The 7N-F57 chipbreaker on this insert is designed to produce controlled chips and reduce chip entanglement during drilling and reaming operations, improving process stability for the P2841S-7N-F57 WXP40 insert. Is the WXP40 grade coated or uncoated? The WXP40 grade is supplied as an uncoated cemented carbide; this offers a robust cutting edge suitable for many standard drilling and reaming applications. Which machining tasks is this insert best suited for? This indexable insert is intended for productive drilling and reaming where chip control and consistent edge performance are priorities; suitability for specific materials should be checked against the product matrix. How should toolmakers integrate this insert into an existing tool system? Select a compatible toolholder and ensure correct clamping and orientation for the P2841S-7N-F57 WXP40 insert to maintain run-out tolerances and achieve the expected surface finish. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P2901-1R WAK15 Wendeplatten - Walter Tools
P2901-1R WAK15 Fräswendeschneidplatte – Walter Tools Die P2901-1R WAK15 Fräswendeschneidplatte ist eine unbeschichtete Hartmetallplatte, speziell entwickelt für die Bearbeitung von Aluminium und anderen Nichteisenmetallen in produktiven Fräsprozessen. Unbeschichtetes Hartmetall mit scharfer Schneide Optimierter Spanformer 1R für saubere Späne Speziell für Aluminium und Nichteisenmetalle ausgelegt Teil des Walter N‑Sortensystems für einfache Sortenwahl Präzise Schnittführung und langlebige Schneidkante für Aluminium Bei der Bearbeitung von Aluminium sorgt die Kombination aus unbeschichtetem Hartmetall und einer scharfen Geometrie für reduzierte Anhäufungen und gleichmäßige Spanbildung. Die Wendeschneidplatte liefert eine konstante Oberflächengüte, da der Schneidstoff speziell auf niedrige Reibung ausgelegt ist. Anwender profitieren von stabilen Bearbeitungsparametern und weniger Nacharbeit, was die Prozesssicherheit in Serienfertigungen erhöht. Effiziente Spankontrolle durch den Spanformer 1R Der integrierte Spanformer 1R ermöglicht kontrollierte Späne beim Fräsen von weichen und duktilen Werkstoffen, wodurch Werkzeugstandzeiten verlängert und Maschinenstillstände reduziert werden. Für Anwender bedeutet das weniger Eingriffe während der Schichten und eine vorhersehbare Werkzeugkostenrechnung. Zudem erleichtert die saubere Spanabfuhr die Entsorgung und reduziert das Risiko von Maschinenverschmutzung. Systematik und Sortenwahl im Alltag integrieren Als Teil des Walter N‑Sortensystems ist die Platte leicht in bestehende Lager- und Bestellprozesse integrierbar. Die klare Sortenbezeichnung WAK15 unterstützt eine schnelle Zuordnung für Aluminium‑Anwendungen und vereinfacht die Werkzeugrotation in der Produktion. Diese Systematik fördert effiziente Bevorratung und minimiert Fehlbestellungen in kleinen wie großen Fertigungsumgebungen. Einsatzgebiet und Nutzerprofil Die Wendeschneidplatte richtet sich an Fertigungsbetriebe und Lohnbearbeiter, die häufig Aluminium und andere Nichteisenmetalle fräsen. Sie ist geeignet für Anwendungen, bei denen scharfe Kanten und kontrollierte Spanbildung gefragt sind, etwa beim Schruppen und Schlichten leichter Legierungen. Durch die robuste, aber präzise Schneidstoffauslegung werden Produktionsprozesse planbarer und kosteneffizienter. Empfehlung: Für produktive Aluminium‑Bearbeitung die P2901-1R WAK15 von Walter Tools wählen; bei technischen Fragen oder Bestellwunsch Metav Werkzeuge kontaktieren – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: P2901-1R-WAK15-WALTER Marke: Walter Tools Produktart: Fräswendeschneidplatte Bezeichnung: P2901-1R WAK15 Serie: Walter N-Sortensystem Sorte: WAK15 Spanformer: 1R Fakten Besonderheiten unbeschichtetes Hartmetall Bearbeitbar: Aluminium Einsatzgebiet: Nichteisenmetalle N: Nichteisenmetalle (Aluminium, Kupfer, Messing) Teil des Walter N‑Sortensystems FAQ Für welche Werkstoffe ist die Platte geeignet? Die P2901-1R WAK15 Fräswendeschneidplatte von Walter Tools ist primär für Aluminium und andere Nichteisenmetalle vorgesehen und liefert dort die beste Performance. Handelt es sich um eine beschichtete Wendeschneidplatte? Nein, die Wendeschneidplatte ist unbeschichtet; der unbeschichtete Schneidstoff ist speziell auf die Eigenschaften von Aluminium und vergleichbaren Werkstoffen abgestimmt. Was bewirkt der Spanformer 1R in der Praxis? Der Spanformer 1R formt kurze, kontrollierbare Späne und reduziert Materialanhaftungen, was die Standzeit der Schneide und die Sauberkeit am Werkstück verbessert. Wie unterstützt das Walter N‑Sortensystem die Lagerhaltung? Das Walter N‑Sortensystem mit der Sorte WAK15 erlaubt eine schnelle Sortenzuordnung und vereinfacht Bestellung sowie Bevorratung, sodass Produktionsunterbrechungen minimiert werden. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2901-1R WHH15X WHH15X Wendeplatten - Walter Tools
Benefit from the combination of WHH15X coated-carbide performance and a 1R chipbreaker for consistent chip control and productive milling cycles; order the parts directly via Metav Werkzeuge or consult the specialists for selection advice. P2901-1R WHH15X – milling indexable insert, 1R chipbreaker | Walter Tools A P2901-1R WHH15X milling indexable insert designed for versatile roughing and profiling within an open Walter carbide series Coated carbide grade WHH15X 1R chipbreaker for controlled chips Open series for broad application Designed for productive milling Consistent productivity through optimised cutting geometry The combination of the WHH15X coated-carbide grade and the 1R chipbreaker produces reliable chip formation and removal, reducing cycle interruptions and contributing to stable machining. As an indexable milling insert, this component is engineered to maintain cutting-edge integrity over repeated indexings, which supports predictable tool-life and less frequent intervention at the machine. The geometry promotes efficient evacuation of swarf in interrupted cuts and continuous milling alike, yielding improved process throughput and a lower cost per component when integrated into a systematic tool management strategy. Broad application scope with clear selection guidance The open-series design of this insert targets flexibility across common milling tasks and workpiece materials. Material suitability is matrix-dependent; the P2901-1R WHH15X is a coated carbide grade, so compatibility with specific steels, cast irons or non-ferrous alloys should be verified against the product matrix before use. For production planners and process engineers, this means the insert can be deployed where reliable chip control and repeatable results are priorities, while final selection and cutting parameters are matched to the application to maximise efficiency and surface finish. Material characteristics and practical handling recommendations The insert is supplied as a coated hardmetal grade intended to balance wear resistance and edge toughness for everyday milling operations. Because the base material and coating are catalogue-dependent, it is important to reference the exact article specification when ordering replacement inserts or setting machining parameters. Indexing the insert at first signs of wear helps to preserve component quality; similarly, pairing the insert with an appropriate cutter body and correct clamping torque ensures repeatable seating and runout control, which directly affects surface quality and tool life. Contact Metav Werkzeuge to request matching Walter Tools WHH15X inserts, confirm the correct grade for the application and secure the P2901-1R WHH15X for optimised milling performance Technical Data SKU: P2901-1R-WHH15X-WALTER Designation: P2901-1R WHH15X Product type: milling indexable insert Brand: Walter Tools Core specifications Chipbreaker: 1R Grade: WHH15X Material: catalogue-dependent ISO designation: P2901-1R WHH15X Special features Coated carbide grade Open series for broad application Optimised chip control for productive milling Sorteneinsatz: check product matrix for material suitability FAQ Which materials is this insert intended for? Material compatibility depends on the exact configuration; the P2901-1R WHH15X is a coated carbide grade—refer to the product matrix to confirm suitability for specific steels, cast iron or non‑ferrous alloys. What chip control can be expected from this insert? The 1R chipbreaker provides controlled chip formation and evacuation, supporting uninterrupted machining and reliable swarf handling in typical milling operations. How is the insert identified for ordering? The ISO designation P2901-1R WHH15X and SKU P2901-1R-WHH15X-WALTER identify the article and grade for precise ordering and stock management. Is the coating and substrate information fixed? Coating and substrate are catalogue-dependent; the WHH15X class denotes a coated hardmetal grade, but always verify the exact specification in the product sheet before procurement. What should be considered when integrating the insert into an existing toolset? Ensure the correct cutter body and clamping system for the indexable milling insert, check runout tolerances and select cutting parameters in line with the product matrix to achieve consistent surface quality and tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the listed brands. The offered article is original, brand-new goods from the manufacturer.
P2901-1R WK10 WK10 Wendeplatten - Walter Tools
Benefit from a cost-effective, uncoated WK10 carbide grade combined with the 1R chipbreaker for consistent chip formation and productive milling cycles. The compact designation and series compatibility make the insert a practical choice for inventory rotation; order the P2901-1R WK10 milling insert via Metav Werkzeuge or consult the sales engineers for specification matching. P2901-1R WK10 milling indexable insert (1R chipbreaker) by Walter Tools The P2901-1R WK10 is a milling indexable insert designed for general-purpose milling tasks, offering an uncoated carbide grade from Walter Tools intended for broad industrial applications where reliable cutting-edge behaviour is required. Uncoated carbide grade WK10 1R chipbreaker for reliable chip control Suitable for broad material range Productive, uncoated carbide for reliable machining The insert is built on an uncoated carbide basis, designated WK10, which provides a balance between cost-efficiency and wear resistance in many milling operations. As an indexable insert the component reduces downtime during tool changes and supports stable cutting conditions. The combination of the grade and geometry promotes repeatable performance across batches, contributing to predictable tool life and more efficient process planning. Controlled chip formation and process stability The integrated 1R chipbreaker is engineered to guide chips away from the cutting zone, improving evacuation and reducing the risk of re-cutting. Improved chip control lowers machine downtime and helps maintain surface quality without requiring complex coolant strategies. In practical terms, this results in steadier feeds and cuts, which supports higher productivity and consistent component finish in serial production. Selection guidance and application scope The insert is supplied within the Walter Schneidstoffsorte - Serie offen and the material specification is catalogue-dependent; therefore, material suitability should be verified against the product matrix for the intended application. For flexible workshop operations, the insert’s designation facilitates easy matching with toolholders and milling cutters. When integrating this component, factor in workpiece material, machining strategy and machine capability to exploit the WK10 grade’s strengths effectively. For application advice, batch procurement or to confirm material suitability of the Walter Tools P2901-1R WK10 insert contact Metav Werkzeuge by eMail: info@metav-werkzeuge.com or by phone: +49 2822 7131930 for prompt technical support and ordering information Technical Data SKU: P2901-1R-WK10-WALTER Designation: P2901-1R WK10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WK10 Facts Chipbreaker: 1R Designation without grade: P2901-1R ISO designation: P2901-1R WK10 Special features Uncoated carbide (as per series) Catalogue-dependent material specification Indexable insert for milling Check product matrix for material suitability FAQ What materials is the insert suitable for? Material suitability must be verified in the product matrix; the P2901-1R WK10 insert is supplied as an uncoated carbide grade intended for a broad material range, but exact compatibility depends on the specific workpiece material. Does this insert come with a coating? No, the WK10 grade is supplied as an uncoated carbide according to the series description, which can be preferable for certain interrupted cuts and where coating may impair edge formation. What benefit does the 1R chipbreaker provide? The 1R chipbreaker improves chip control and evacuation during milling, supporting consistent surface quality and reducing the likelihood of recutting chips into the workpiece. How should the insert be matched to a milling cutter? Match the P2901-1R designation and chipbreaker geometry with the cutter’s seat and clamping system; confirm the WK10 grade’s suitability for the planned cutting speeds and feeds via the product matrix. What distinguishes the WK10 grade within Walter’s range? WK10 is an uncoated hardmetal grade from Walter Tools intended to offer a practical balance of wear resistance and economical performance; suitability for specific workpiece materials should be checked in the technical matrix. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
P2901-1R WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the WPM15G coated carbide grade and the Tiger·tec Gold platform to achieve longer tool life and consistent chip control with the 1R chipbreaker; a combination that increases productivity and reduces downtime in milling operations. Order directly via Metav Werkzeuge or consult our specialists for application-specific selection. P2901-1R WPM15G Fräswendeschneidplatte – Tiger·tec Gold by Walter Tools The P2901-1R WPM15G insert is a coated carbide indexable milling insert designed for productive milling and broad material coverage within industrial machining applications. P2901-1R insert in Tiger‑tec Gold series WPM15G coated carbide for broad material range 1R chipbreaker for reliable chip control Designed for productive milling processes Longer tool life through advanced coating technology The Tiger·tec Gold coating combined with the WPM15G grade provides a high-performance, coated carbide solution that increases run time under demanding conditions. The multilayer surface treatment reduces abrasive wear and improves resistance to heat, which translates directly into fewer tool changes and more continuous production time. For manufacturers seeking measurable gains in output, this grade supports elevated cutting speeds and consistent component quality, helping to lower manufacturing costs per part while maintaining predictable tool behaviour. Better process stability and surface quality with engineered chip control The 1R chipbreaker geometry offers controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface finish on the workpiece. As an indexable milling insert, the design enables fast replacement of cutting edges without regrinding, which shortens set-up and maintenance intervals. The optimized chip control also lessens machine load fluctuations, leading to improved process reliability and repeatable results across batches. Application matrices should be consulted to match the insert’s strengths to specific materials and cutting parameters. Practical integration and selection for production environments This insert is engineered for straightforward integration into standard milling tool bodies and is suitable for a wide variety of milling strategies where increased productivity is required. The coated carbide nature of the grade means it performs well across many common materials, but the precise suitability must be checked against the product matrix to ensure optimal performance in specialised alloys. For technical advice on toolholders, cutting data or process adjustments, Metav Werkzeuge provides tailored guidance and selection support to align the insert’s capabilities with specific production targets. Contact Metav Werkzeuge for individual application consulting on Walter Tools inserts and for fast delivery information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: P2901-1R-WPM15G-WALTER SKU: P2901-1R-WPM15G-WALTER Name: Fräswendeschneidplatte P2901-1R WPM15G Walter Tools Facts Chipbreaker: 1R Series: Tiger‑tec Gold Grade: WPM15G Special features Coated carbide (Katalogabhängig) Designation: P2901-1R Indexable milling insert Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P2901-1R WPM15G insert, part of the Tiger·tec Gold series from Walter Tools, is designed for a broad material range; suitability for a specific alloy should be checked against the product matrix. How does the 1R chipbreaker improve machining? The 1R chipbreaker controls chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions when using Walter Tools indexable milling inserts. Can this insert be used at high cutting speeds? Yes, the Tiger·tec Gold coating and the WPM15G grade are engineered to support elevated cutting speeds while maintaining tool life and thermal stability. What is the main benefit of using an indexable milling insert like this one? Indexable inserts reduce tool change time and enable repeatable edge geometry, which increases uptime and keeps production processes consistent with Walter Tools components. Is there technical support for selecting cutting parameters? Technical selection and cutting data guidance can be provided for the P2901-1R WPM15G insert to match the grade and chipbreaker to the intended machining task. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2903-2R WAK15 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated carbide cutting edge and a geometry optimised for aluminium and other non‑ferrous metals to improve cycle times and surface quality; the Walter N‑series grade WAK15 provides consistent chip control. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. P2903-2R WAK15 milling indexable insert — uncoated carbide for aluminium, Walter Tools The P2903-2R WAK15 is an indexable milling insert engineered for high‑efficiency machining of aluminium and other non‑ferrous metals, featuring a 2R chipbreaker geometry within the Walter N series. Uncoated carbide grade WAK15 Optimised for aluminium and non‑ferrous metals Walter N‑series geometry for chip control Chipbreaker type 2R for secure swarf management Faster, cleaner machining of non‑ferrous materials The insert is designed to deliver reliable chip control and reduced built‑up edge when working with aluminium and similar materials. The combination of a very sharp, uncoated carbide cutting edge and the 2R chipbreaker reduces material adhesion and promotes stable swarf formation, which in turn cuts tool change frequency and improves process stability. For workshops seeking a measurable boost in throughput, this geometry supports higher feed rates while maintaining surface quality. Why the WAK15 grade suits aluminium and non‑ferrous alloys The WAK15 grade is an uncoated cemented carbide specifically selected for non‑ferrous applications. Its microstructure and edge preparation favour low friction and minimal tendency for material buildup, so operators can expect better consistency in finish and dimensional control. Where conventional coated grades can trap swarf or bind on soft metals, an uncoated solution often ensures a cleaner cut and fewer interruptions in production. Seamless integration into existing milling systems As a standard sized insert within the Walter N‑series, the P2903‑2R fits common milling cutters that accept P2903 style parts. The defined chipbreaker and grade combination reduces the need for frequent process optimisation when changing workpiece batches of aluminium or other non‑ferrous metals. This results in less downtime for setup and a simpler inventory strategy for indexable parts. Where compatibility checks are required, Metav Werkzeuge’s consultants can advise on seat fitment and cutting parameters. For reliable aluminium machining with Walter Tools' WAK15 grade, contact Metav Werkzeuge for tailored application support or to arrange procurement through their technical sales team Technical data Article number: P2903-2R-WAK15-WALTER Designation: P2903-2R WAK15 Manufacturer: Walter Tools Series: Walter N‑Sortensystem Data Grade: WAK15 Material group: N (non‑ferrous) Chipbreaker: 2R Special features Uncoated carbide grade WAK15 Optimised for aluminium and non‑ferrous metals Part of the Walter N‑series geometry Intended to reduce material adhesion and improve chip control FAQ Which materials is this insert intended for? The P2903‑2R WAK15 insert is optimised for aluminium and other non‑ferrous metals, reflecting the N material group. Is the WAK15 grade coated? No. The WAK15 grade used in this Walter Tools insert is an uncoated carbide grade chosen for low friction and minimal material buildup on soft metals. What chipbreaker does the insert use? The insert features a 2R chipbreaker geometry designed to control swarf in non‑ferrous machining. Can this insert be used for steel machining? This insert is optimised for non‑ferrous materials; steel machining is not the intended application for the WAK15 grade. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new article of the stated manufacturer.
P2903-2R WHH15X Wendeplatten - Walter Tools
Take advantage of the WHH15X coated-carbide performance and the 2R chipbreaker for consistent chip control and prolonged cutting-edge life; this combination supports productive milling cycles and lowers tool-change frequency. Order the insert directly via Metav Werkzeuge or request advice from the technical consultants for application matching. P2903-2R WHH15X Fräswendeschneidplatte — coated carbide insert, 2R chipbreaker (Walter Tools) The P2903-2R WHH15X is a milling indexable insert engineered for productive general milling applications, combining a coated carbide grade with a defined 2R chipbreaker to promote stable cutting behaviour and consistent results. Coated carbide grade WHH15X 2R chipbreaker for controlled chip formation Suitable for productive milling operations Open series — check application matrix Enhance productivity with reliable chip control and lasting edge life The combination of a coated carbide grade and a dedicated 2R chipbreaker delivers tangible benefits for continuous milling tasks. The coating improves resistance to abrasive wear while the chipbreaker geometry supports predictable chip formation, reducing the risk of instable evacuation and downtimes. Such attributes translate into longer effective tool life and fewer interruptions for insert change, which in turn supports higher overall machine uptime and more consistent part quality in serial production. Practical guidance for selecting the correct insert and verifying compatibility Selection is driven by the specific machining task and workpiece material; the WHH15X grade is a coated hardmetal type and its suitability depends on the concrete product matrix. The chipbreaker influences cutting forces and surface finish: a 2R geometry is oriented towards controlled chip breaking in a range of feed and depth settings. For engineers and buyers with limited tooling experience, this means checking the manufacturer’s matrix for recommended cutting parameters and matching the insert geometry to the intended operation to achieve efficient and safe machining. Consistent results backed by a recognised tooling brand As a component from Walter Tools, the insert benefits from industrial development focused on process security and predictable performance. The open series designation signals flexibility across applications while the clearly specified grade aids repeatable procurement. For manufacturing environments that prioritise stable production and reproducible surface quality, this insert supports the rational goal of reduced cycle variability and improved part conformity through reliable cutting-edge behaviour and consistent chip control. For procurement or technical clarification on Walter Tools inserts in grade WHH15X, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number / SKU: P2903-2R-WHH15X-WALTER Product type: Fräswendeschneidplatte Designation: P2903-2R WHH15X Wendeplatten ISO: P2903-2R WHH15X Manufacturer: Walter Tools Data No specific dimensional or cutting-parameter data provided Special features Grade / Sort: WHH15X Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: 2R Material: Katalogabhängig Storytrigger: wendeplatten UID: P2903-2R-WHH15X-WALTER FAQ What machining tasks is this insert intended for? The P2903-2R WHH15X fräswendeschneidplatte is designed for productive milling applications where a coated-carbide insert with a 2R chipbreaker is beneficial; final suitability should be confirmed in the product matrix. How does the 2R chipbreaker affect performance? The 2R chipbreaker on the WHH15X grade promotes controlled chip formation and evacuation, which supports stable cutting behaviour and can improve surface quality under appropriate cutting parameters. Is the WHH15X grade suitable for all materials? WHH15X is a coated hardmetal grade; material compatibility varies. The product matrix must be consulted to determine suitability for specific workpiece materials and machining conditions. How should cutting parameters be chosen for this insert? Cutting parameters should follow the manufacturer’s recommendations for the WHH15X grade and the P2903-2R geometry; consult the technical matrix to select feeds, speeds and depths relevant to the workpiece material and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2903-2R WK10 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of predictable wear, controlled chip formation and straightforward handling for a more efficient milling process — order via Metav Werkzeuge or ask their consultants for material-matrix advice. P2903-2R — P2903-2R WK10 (WK10) Milling indexable insert — uncoated carbide, 2R chipbreaker by Walter Tools A P2903-2R WK10 milling indexable insert engineered for productive milling applications; the uncoated carbide grade offers consistent wear behaviour while the 2R chipbreaker delivers controlled chip formation for stable machining. Uncoated carbide grade WK10 2R chipbreaker for controlled chips Productive milling with stable chips Consistent productivity through predictable wear The open-series WK10 grade is an uncoated carbide designed to provide reproducible edge behaviour in a wide range of general milling tasks. Using an uncoated hardmetal composition simplifies tool management by offering a predictable wear curve, which supports cycle planning and tool-change intervals. The result is a reliable contribution to process stability and reduced unplanned downtime. Emphasising measurable outcomes, the geometry and grade together promote steady material removal rates and help to maintain part tolerances over longer tool life. Controlled chips and improved machining security The 2R chipbreaker geometry focuses on breaking and evacuating chips reliably under typical milling conditions. By actively influencing chip form, the insert reduces the risk of chip entanglement and tool–workpiece interference, which in turn lessens thermal peaks and mechanical loading on the cutter body. For shops aiming at higher first-pass quality, this leads to more consistent surface finish and fewer rework cycles. The insert format and chip control also make it easier to integrate the component into existing fixturing and coolant strategies. Practical handling and application guidance As an indexed tool element, the insert supports rapid seat changes and repeatable positioning, contributing to short set-up times and uniform part quality. The P2903-2R WK10 is supplied in a standard insert form that is compatible with many milling cutters; however, workpiece suitability should be verified in the product matrix before selection. The matrix clarifies which materials and cutting parameters align best with the WK10 grade. For workshops seeking an economical but technically robust milling solution, this insert balances cost-efficiency with straightforward application and predictable performance. Contact Metav Werkzeuge for tailored application advice and to request availability of the Walter Tools P2903-2R WK10 insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: P2903-2R-WK10-WALTER Article: Milling indexable insert P2903-2R WK10 Manufacturer: Walter Tools Grade: WK10 (uncoated carbide) Chipbreaker: 2R Series: Walter Schneidstoffsorte - Serie offen Material: Catalogue-dependent Facts No numerical specifications provided in dataset Special features Indexable milling insert format P2903-2R Uncoated carbide for predictable wear 2R chipbreaker for controlled chip formation Verify workpiece suitability via the product matrix FAQ What materials can this insert machine effectively? Material suitability must be checked against the product matrix; the P2903-2R WK10 by Walter Tools is an uncoated carbide grade intended for general milling tasks and should be matched to the specific workpiece material via the matrix. How does the 2R chipbreaker improve machining? The 2R chipbreaker on the insert shapes and fractures chips into manageable lengths, improving evacuation and reducing the risk of chip-related faults; this supports more consistent surface finish and repeatable cycle times when using the P2903-2R WK10 milling indexable insert. Is the WK10 grade coated? No — WK10 is an uncoated carbide grade, chosen to provide consistent and predictable wear behaviour that eases tool management and scheduling in production environments. Can this insert be used for high-speed milling? The dataset does not specify high-speed suitability; check the product matrix and cutting-parameter recommendations to confirm whether the P2903-2R WK10 matches the intended spindle speeds and feeds. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2903-2R WPM15G WPM15G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPM15G grade for productive milling and stable chip formation; order the insert directly via Metav Werkzeuge or consult our specialists if further technical clarification is required. P2903-2R WPM15G Milling indexable insert — Tiger·tec Gold, 2R chipbreaker (Walter Tools) A P2903-2R WPM15G is a coated carbide milling indexable insert from Walter Tools, designed for productive milling operations with controlled chip formation using a 2R chipbreaker. Tiger·tec Gold coating for long tool life WPM15G grade: coated carbide performance 2R chipbreaker for controlled chip formation Designed for productive milling operations Boosted productivity through modern coating technology The combination of the Tiger·tec Gold coating and the WPM15G grade brings a clear productivity advantage in many milling tasks. The multilayer coating reduces flank wear and enables a more consistent tool life, which translates into fewer tool changes and higher machine uptime. For production-minded operations, this means reduced cycle interruptions and a more reliable machining process. Material suitability should be confirmed against the product matrix before selection to ensure optimal performance for the intended application. Reliable chip control and process stability A dedicated 2R chipbreaker geometry provides predictable chip formation and evacuation, helping to maintain stable cutting forces and improve surface quality. Controlled chip formation reduces the risk of chip re-cutting and contributes to consistent tool life across batches. The insert’s geometry supports efficient swarf management in typical milling set-ups, which is particularly relevant when cycle times and machine utilisation are critical performance indicators in a production environment. Practical guidance for application and selection The insert is manufactured as a coated carbide solution under the Tiger·tec Gold family and is supplied with catalogue-dependent substrate information; users are advised to consult the product matrix for specific material recommendations. For workshops and job shops seeking reproducible results, the insert offers a balance between wear resistance and edge toughness. If any uncertainty exists regarding the match between the tool and the workpiece material or machining strategy, technical advice is available from Metav Werkzeuge to ensure an informed selection. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts and to confirm compatibility with specific machining tasks — Metav Werkzeuge can provide application guidance and ordering support. Technical Data Article number: P2903-2R-WPM15G-WALTER Label: Fräswendeschneidplatte P2903-2R WPM15G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger-tec Gold Grade: WPM15G Chipbreaker: 2R ISO designation: P2903-2R WPM15G Internal code: P2903-2R UID: P2903-2R-WPM15G-WALTER Material note: Katalogabhängig Facts No numerical specifications provided Special features Tiger·tec Gold coating technology Coated carbide grade WPM15G 2R chipbreaker for controlled chips Material suitability to be checked in product matrix Catalogue-dependent substrate information FAQ What is the primary benefit of this milling insert? The main advantage of the P2903-2R WPM15G milling indexable insert (Walter Tools, SKU P2903-2R-WPM15G-WALTER) is its Tiger·tec Gold coating combined with the WPM15G grade, which supports longer tool life and consistent performance in productive milling operations. Which materials can be machined with this insert? Material compatibility depends on the specific substrate and coating combination; the product matrix should be consulted to determine suitable workpiece materials for the P2903-2R WPM15G insert and to ensure optimal cutting conditions. How does the 2R chipbreaker affect machining? The 2R chipbreaker promotes controlled chip formation, improving swarf evacuation and stabilising cutting forces, which helps maintain consistent surface finish and tool life during routine milling cycles. Is this insert suitable for finishing as well as roughing? The insert’s geometry and coated carbide grade are primarily aimed at productive milling; suitability for finishing versus roughing should be verified in the technical product matrix and by considering the specific machining parameters. What information is available about the coating and substrate? The insert belongs to the Tiger·tec Gold family and uses the WPM15G coated carbide grade; detailed substrate information is catalogue-dependent and should be referenced in the manufacturer’s product documentation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com