P2841S-5N-A57 WKP25S Wendeplatten - Walter Tools
Reliable performance for drilling and boring is achieved with the P2841S-5N-A57 WKP25S through the combination of Tiger‑tec Silver coating and the WKP25S carbide grade, delivering stable chip control and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. P2841S-5N-A57 WKP25S – Indexable drill/boring insert, Tiger‑tec Silver, Walter Tools The P2841S-5N-A57 WKP25S is an indexable cutting insert designed for drilling and bore-enlarging operations, optimised for machining steel and cast iron. Tiger‑tec Silver coating technology WKP25S coated carbide grade Optimised for steel and cast iron machining Stable chip formation and productive cutting Engineered for reliable drilling and boring performance The insert is based on the Tiger‑tec Silver family and the WKP25S coated carbide grade, engineered to withstand the thermally demanding conditions of steel machining while maintaining wear resistance against abrasive cast iron. This combination results in consistent cutting behaviour and helps to reduce the frequency of tool changes. The geometry and coating synergy support predictable tool life and minimise process variation, which directly contributes to uninterrupted production and a lower cost per hole in high‑volume operations. Consistent chip control reduces interruptions The integrated 5N‑A57 chipbreaker is designed to produce controlled, repeatable chip shapes when working with both steel (P) and cast iron (K). Improved chip control prevents clogging and reduces the risk of rework or machine stoppages. For machining environments that alternate between interrupted cuts and continuous runs, this insert’s chipformer and coated substrate deliver smoother evacuation and less heat concentration at the cutting edge, translating into longer edge life and fewer unscheduled interventions. Productivity gains through process reliability Using a grade and coating technology aligned to the workpiece material enables higher cutting data and more aggressive feed strategies where appropriate. The coated carbide substrate supports reliable cutting under varying conditions, offering measurable productivity benefits such as fewer indexings, reduced tool inventory turnover and improved spindle uptime. These operational gains are particularly relevant for job shops and production cells aiming to increase throughput without compromising surface finish or dimensional stability. Material compatibility and practical application advice Marked for workpiece groups P and K, the insert is suitable for a wide range of unalloyed and alloyed steels as well as common cast irons. The designation and geometry make it suitable for integration into standard indexable drill and boring toolholders that accept the P2841S family of inserts. For best results, match the insert grade with coolant strategy and holder rigidity: steel applications tend to benefit from controlled coolant and stable clamping, while cast iron machining often tolerates higher chip-breaking demands. For selection assistance and cutting parameter recommendations, technical consultation is available. For tailored selection and to discuss toolholder compatibility or trial samples, contact Metav Werkzeuge – phone +49 2822 7131930 or email info@metav-werkzeuge.com for fast, application-specific support. Technical data SKU: P2841S-5N-A57-WKP25S-WALTER Article designation: P2841S-5N-A57 WKP25S Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Core characteristics Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: 5N-A57 Material code: P / K Materials and special features Coating/technology: Tiger‑tec Silver Substrate: coated carbide Suitable for: Steel (P) Suitable for: Cast iron (K) Application: drilling and bore enlarging FAQ What materials is this insert suitable for? The P2841S-5N-A57 WKP25S insert is specified for machining steel (P) and cast iron (K), reflecting its coating and grade design. How does the 5N‑A57 chipbreaker help in production? The 5N‑A57 chipbreaker promotes stable chip formation and evacuation, reducing interruptions and supporting longer effective cutting periods. Is this insert compatible with standard indexable drill holders? Yes, the insert conforms to the P2841S family designation and is intended for use in toolholders that accept this insert geometry for drilling and boring operations. What advantages does Tiger‑tec Silver provide? The Tiger‑tec Silver technology combines a wear‑resistant coating with a robust substrate to improve edge stability, thermal resistance and overall tool life during machining of steel and cast iron. Can this grade handle interrupted cuts and mixed operations? The WKP25S grade, together with the chipformer, is designed to tolerate interrupted cutting and variable load conditions, offering repeatable performance across mixed operations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tooling for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands beyond the distribution of original, factory-new products from the respective manufacturers.
P2841S-5N-A57 WKP35S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and WKP35S grade for productive, durable machining of steel and cast iron; their combined performance supports stable chip formation and longer tool life. Order the P2841S-5N-A57 WKP35S cutting insert directly via Metav Werkzeuge or ask our consultants if needed. P2841S-5N-A57 WKP35S — Drilling/boring indexable insert, Tiger‑tec Silver (Walter Tools) The P2841S-5N-A57 WKP35S is an indexable insert designed for drilling and boring operations, optimised for machining steel and cast iron with a coated carbide grade for reliable production use Tiger‑tec Silver coating for long tool life WKP35S: coated carbide grade for steels and cast iron Geometry 5N‑A57 for reliable chip control Walter Tools quality and consistent performance Increased productivity through modern coating technology The combination of Tiger‑tec Silver coating and the WKP35S grade provides measurable gains in tool life and process stability in production environments. The coating reduces abrasive and adhesive wear on the cutting edges, which in turn extends service intervals and lowers tool-change frequency. For operations where uptime matters, this means a higher number of finished components per shift and improved overall equipment effectiveness. Geometry engineered for controlled chips and surface quality The 5N‑A57 geometry acts as an effective chipbreaker, facilitating predictable chip formation and evacuation during drilling and boring cycles. Predictable chip behaviour reduces the risk of rework caused by chip re-cutting and helps to maintain consistent surface finish. This geometry is particularly beneficial when working with interruption-prone castings and tougher steel grades, as it minimises vibration and stabilises the cutting process. Application-focused advantages for workshop and production use Specified for ISO material groups P (steel) and K (cast iron), the insert combines a robust, coated carbide substrate with a geometry tailored for holemaking. The result is a balance between wear resistance and edge stability that supports both short-run and high-volume production. By choosing this insert, operators gain a practical solution for machining varying workpiece materials without frequent tool swaps, helping to streamline set-up and inventory management. Practical integration and technical support readiness The indexable format allows fast replacement without complex regrinding, keeping setup times low and making the insert suitable for automated drilling and boring centres as well as manual machines. Technical documentation and cutting data are available on request to support process optimisation and feed/speed selection. For customers requiring machining recommendations, the insert’s characteristics aid in selecting appropriate coolant and parameter windows to achieve consistent results. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Silver inserts, request cutting data or place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P2841S-5N-A57-WKP35S-WALTER Designation: P2841S-5N-A57 WKP35S Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Core specifications Material groups: P (steel), K (cast iron) Grade: WKP35S Geometry: 5N-A57 Series: Tiger‑tec Silver Special features Coated carbide Optimised chip control Intended for drilling and boring operations Suitable for production machining and workshops FAQ What materials can this insert machine? The P2841S-5N-A57 WKP35S insert from Walter Tools is designed for ISO groups P and K, meaning it is suitable for machining steels and cast iron. What does the WKP35S grade indicate? The WKP35S grade in the P2841S-5N-A57 WKP35S denotes a coated carbide formulation optimised under the Tiger‑tec Silver technology for balanced wear resistance and edge stability. How does the 5N‑A57 geometry affect cutting? The 5N‑A57 geometry provides controlled chip formation and evacuation, improving surface finish and reducing vibration during drilling and boring operations. Is this insert suitable for both short runs and high-volume production? Yes, the design of the P2841S-5N-A57 WKP35S supports stable tool life and repeatable performance, making it appropriate for workshop jobs and continuous production environments. Can the insert help reduce machine downtime? By offering extended edge life and predictable chip behaviour, the insert contributes to fewer tool changes and more consistent cycle times, which supports reduced downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods of the manufacturer. Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group.
P2841S-5N-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile material suitability for P / M / S, and the 5N-A57 chipbreaker to achieve stable chip formation and extended edge life in drilling and boring operations; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. P2841S-5N-A57 WSP45G – Drilling/Boring indexable insert with Tiger·tec Gold by Walter Tools P2841S-5N-A57 WSP45G is a drilling and boring indexable insert engineered for productive metalcutting in demanding materials, combining a PVD-coated carbide grade with a specialised chipbreaker for reliable machining. Tiger·tec Gold PVD-coated carbide Versatile for Steel, Stainless and Superalloys 5N-A57 chipbreaker for controlled chips Robust edge stability for productive milling Consistent performance in demanding machining The WSP45G grade, part of the Tiger·tec Gold family, delivers coated carbide performance tuned for toughness and thermal resistance. This produces a notable improvement in tool life where interrupted cuts or variable cutting conditions are common. The coating technology reduces friction at the cutting edge, which means less heat transfer into the substrate and a lower risk of premature flank wear. For production environments this translates into fewer tool changes and more stable cycle times, supporting higher overall productivity. Reliable chip control and reduced rework Built around the chipbreaker 5N-A57, this insert promotes chip control that is consistent across a range of feeds and depths of cut. The controlled chip form improves evacuation in through-tool and external coolant setups alike, reducing the incidence of recut material and the associated surface defects. As a result, workpieces frequently meet dimensional and surface finish requirements with fewer passes, improving process efficiency and reducing secondary operations. Broad material capability for flexible production planning The insert is specified for machining groups P / M / S, meaning it is suitable for unalloyed and alloyed steel, rostfreier Stahl (stainless steel), and heat-resistant superalloys or Titan. Each material group imposes different demands—such as high temperatures or tenacious chip formation—and the WSP45G composition is tuned to retain edge integrity under these conditions. This versatility allows a single tooling family to be deployed across mixed-production schedules, simplifying inventory and setup choices. Seamless integration into productive tool systems As a drilling/boring indexable insert, the component is intended for fitment in standard drilling and boring toolholders used in metalcutting centres. The combination of a stable cutting edge and the Tiger·tec Gold surface treatment supports uninterrupted machining at elevated temperatures, which can reduce cycle times and improve batch consistency. The resulting process security is particularly beneficial where repeatability and component quality directly affect downstream assembly or finishing steps. For tailored application advice, availability of Walter Tools Tiger·tec Gold inserts, or to discuss optimal cutting parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and order processing Technical Data SKU: P2841S-5N-A57-WSP45G-WALTER Designation: P2841S-5N-A57 WSP45G Product type: Drilling/Boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core Specifications Grade: WSP45G Chipbreaker: 5N-A57 Applicable materials: P / M / S Material class: Coated carbide Features & Applications Suitable for steel, rostfreier Stahl and superalloys/Titan Designed for drilling and boring operations Stable chip formation and controlled evacuation Optimised for edge stability and process security Versatile choice for mixed-production environments FAQ What materials can be machined with this insert? The P2841S-5N-A57 WSP45G insert is engineered for machining Steel (P), rostfreier Stahl (M) and heat-resistant Superalloys/Titan (S), offering broad versatility across these ISO material groups. What benefit does the Tiger·tec Gold surface provide? The Tiger·tec Gold coating on the WSP45G grade reduces friction, improves thermal resistance and enhances edge life, which helps maintain cutting performance under elevated temperatures and demanding conditions. How does the 5N-A57 chipbreaker affect machining? The 5N-A57 chipbreaker produces a controlled chip form that eases evacuation, reduces the risk of recutting and supports consistent surface quality during drilling and boring tasks. Is this insert suitable for both drilling and boring tool systems? Yes, the insert is a drilling/boring indexable type intended for integration into compatible toolholders, delivering stable cutting behaviour for holemaking and bore-enlargement operations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used solely for explanation and identification purposes. There is no affiliation between our company and the named brands. The offered item is original and factory-new from the manufacturer.
P2841S-5N-A57 WXP40 Wendeplatten - Walter Tools
Combine robust uncoated carbide performance with precise 5N‑A57 chip control for consistent machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. P2841S-5N-A57 WXP40 – Indexable insert for drilling and boring, 5N‑A57 chipbreaker — Walter Tools The P2841S-5N-A57 WXP40 is an indexable insert designed for drilling and boring operations, offering uncoated carbide grading and a dedicated chipbreaker for improved chip formation and process stability. Uncoated carbide grade WXP40 Dedicated 5N‑A57 chipbreaker For drilling and boring applications Reliable chip control for steady production The insert is engineered around the 5N‑A57 chipbreaker, which promotes consistent chip control during interrupted and continuous cuts. Better chip formation reduces the risk of recutting and tool damage, contributing to more stable cycle times and lower scrap rates. The combination of a sharp cutting edge and a purposeful chip geometry makes this component particularly useful in production environments where repeatability and predictable chip flow are priorities. For sectors that require controlled chip evacuation, the chipbreaker design aids coolant flow and swarf management without additional process changes. Consistent cutting performance from uncoated carbide Made from the WXP40 uncoated carbide grade, the insert delivers a balance between edge strength and economical tool life. Uncoated carbide often offers a sharper initial cutting edge and improved resistance to certain thermal and mechanical loads where coatings are unnecessary or undesirable. That characteristic can be advantageous for applications with variable cutting parameters or when the workpiece material demands a basic carbide substrate. Given the product matrix approach to material selection, customers should verify the WXP40 grade against specific workpiece materials to determine optimal cutting speeds and feeds. Practical handling, compatibility and integration The insert’s geometry and ISO designation suit standard insert holders and drilling/boring tool bodies commonly used in workshop and CNC setups. The indexable format simplifies replacement: when the cutting edge wears, rotating or exchanging the insert restores performance without regrinding. This reduces machine downtime and simplifies inventory management. While the insert is ready for typical toolholders, confirm compatibility with the chosen tool body and check clamping torque specifications in the toolholder documentation to ensure secure seating and repeatable runout control. Application guidance and process benefits Using this insert can contribute to higher process reliability through predictable tool change intervals and consistent chip behaviour. The uncoated substrate and the chipbreaker together support applications that prioritise mechanical robustness and straightforward machining strategies. For accurate selection, refer to the manufacturer’s product matrix to establish whether the insert suits specific materials and hardness ranges. Where process optimisation is required, consider pairing the insert with appropriate coolant strategies and validated feed/speed tables for the best balance of productivity and component surface quality. For tailored application advice or to request availability for the Walter Tools P2841S-5N-A57 WXP40 insert, contact Metav Werkzeuge for technical guidance and prompt supply: eMail info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: P2841S-5N-A57-WXP40-WALTER SKU: P2841S-5N-A57-WXP40-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte (indexable insert) Core data Grade: WXP40 Chipbreaker: 5N‑A57 Series: Walter Schneidstoffsorte - Serie offen Special features Material information: Katalogabhängig ISO designation: P2841S-5N-A57 WXP40 Format: indexable insert for drilling/boring Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P2841S-5N-A57 WXP40 is supplied in the WXP40 uncoated carbide grade; users should consult the Walter Tools product matrix to verify suitability for specific workpiece materials. Is the insert coated? The WXP40 designation indicates an uncoated carbide grade for the P2841S-5N-A57 insert, offering a sharp cutting edge and mechanical robustness. How does the 5N‑A57 chipbreaker improve machining? The 5N‑A57 chipbreaker on this indexable insert promotes controlled chip formation and evacuation, reducing recutting and supporting stable cycle times in drilling and boring operations. Can this insert be used in standard toolholders? The indexable format of the P2841S-5N-A57 is compatible with commonly used drilling and boring tool bodies, but confirmation of holder compatibility and clamping specifications is recommended. Manufacturer: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) is part of the global tooling community and is mentioned here for explanatory purposes. Protected trademarks and brand names remain the property of their respective owners. There is no affiliation implied between our company and the named manufacturers. The offered article is an original, factory-new product of the manufacturer.
P2841S-5N-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP25S carbide grade for high wear resistance and stable chip formation in steel and cast iron machining; order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. P2841S-5N-E57 WKP25S Boring/Counterboring indexable insert (Tiger·tec Silver) – Walter Tools The P2841S-5N-E57 WKP25S is a coated indexable insert designed for precise boring and counterboring in steel and cast iron, combining a wear-resistant Tiger·tec Silver surface with a controlled 5N‑E57 chipformer for predictable machining. Tiger·tec Silver coating for high wear resistance WKP25S coated carbide grade for stable cutting Optimised 5N-E57 chipformer for reliable chips Suited for machining steel and cast iron Boosted productivity through a wear-resistant coating The Tiger·tec Silver surface treatment delivers improved wear resistance under the thermal and mechanical loads typical of steel machining. Combined with the WKP25S cutting grade, the insert sustains cutting edge integrity for longer intervals, reducing the frequency of tool changes and supporting a smoother production flow. This translates into measurable gains in uptime and lower per-part tooling cost when used in systematic boring cycles. Predictable chip formation for safer, faster cycles The integrated 5N‑E57 chipformer is engineered to produce short, controllable chips when working in both unalloyed and alloyed steels as well as cast iron. Predictable chip behaviour simplifies chip evacuation and reduces the risk of surface damage or rework, supporting higher cutting speeds and more aggressive feeds where process reliability is critical. The result is consistent component quality and fewer interruptions for manual chip clearing. Versatile use on steel and cast iron materials Designed according to ISO material groups P and K, this insert is suitable for a wide range of applications in steel and cast iron. The coated carbide construction balances toughness and hardness to resist abrasive wear from cast materials while coping with the heat and deformation typical of steel cutting. For workshops processing mixed batches, the insert offers a practical compromise between performance and flexibility. Ease of integration and stable results in production The geometry and coating make the insert a pragmatic choice for standard boring toolholders and multi‑station boring heads, enabling straightforward integration into existing tooling systems. Its repeatable performance helps to maintain surface finish quality and dimensional consistency across production runs, supporting quality assurance targets and reducing downstream inspection effort. Contact Metav Werkzeuge for a tailored recommendation or to confirm compatibility with existing boring systems and insert holders. Metav Werkzeuge provides practical application advice and order support for Walter Tools inserts. Technical Data Article number: P2841S-5N-E57-WKP25S-WALTER SKU: P2841S-5N-E57-WKP25S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-5N-E57 WKP25S Walter Tools Facts Coating technology: Tiger·tec Silver Grade: WKP25S Chipformer: 5N-E57 Special features Coated carbide cutting grade Suitable for steel (P) and cast iron (K) Series: Tiger·tec Silver Optimised for predictable chip control Designed for boring and counterboring operations FAQ What materials is this insert intended for? The P2841S-5N-E57 WKP25S insert is intended for machining steel (ISO group P) and cast iron (ISO group K) and is optimised for those material behaviours. Does the Tiger·tec Silver coating improve tool life? Yes, the Tiger·tec Silver coating on the WKP25S grade enhances wear resistance and helps to extend tool life under typical boring conditions. What is the purpose of the 5N‑E57 chipformer? The 5N‑E57 chipformer is designed to produce short, controllable chips for safer evacuation and more consistent surface quality when boring steel and cast iron. Can this insert be used in existing boring holders? The insert’s geometry and designation P2841S-5N-E57 are compatible with standard boring and counterboring holders that accept this family of indexable inserts; toolholder compatibility should be verified against holder specifications. Is this an original Walter Tools product? This is an original, factory-new Walter Tools insert in the Tiger·tec Silver series and carries the WKP25S grade designation. Walter Tools: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-5N-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for reliable, long-lasting performance in steel and cast iron machining; efficient chip control and stable edge life support continuous productivity. Order the insert via Metav Werkzeuge or request tailored application advice from the technical team. P2841S-5N-E57 WKP35S — Bohr-/Aufbohrwendeschneidplatte for steel & cast iron by Walter Tools A P2841S-5N-E57 WKP35S indexable drill insert designed for drilling and counterboring operations in steel and cast iron, featuring a Tiger·tec Silver coating and a 5N-E57 chipbreaker. Tiger·tec Silver coating for longer tool life WKP35S coated carbide grade Optimised for steel and cast iron machining Stable chip formation and high productivity Consistent productivity through coating and grade The combination of Tiger·tec Silver surface technology and the WKP35S grade delivers a clear productivity advantage in component machining. The coating reduces abrasive wear and improves thermal resistance, resulting in a longer effective tool life and fewer interruptions for index changes. By prioritising cutting stability and consistent edge retention, the insert supports uninterrupted production cycles and predictable tool-change intervals, which helps to plan machining runs with greater accuracy. Controlled chip formation for safer, cleaner processes The 5N-E57 chipbreaker geometry is engineered for reliable chip control when working with both steel and cast iron. Short, controlled chips reduce the risk of re-cutting and help maintain surface finish quality while easing swarf management. For unfamiliar terms: a chipbreaker shapes the metal swarf at the cutting edge so that chips break into manageable segments, which is particularly beneficial in operations where swarf evacuation and machine cleanliness are critical to cycle time and component integrity. Broad applicability with a coated carbide substrate Built on a coated carbide substrate, the insert is suited for typical ISO P and K applications, meaning it is appropriate for unalloyed and alloyed steel as well as cast iron. The material and coating pairing offers a good balance between toughness and wear resistance, enabling productive machining across a range of part geometries and process conditions. This makes the insert a practical choice for job shops and production lines aiming to reduce tooling complexity while maintaining flexible material coverage. Practical procurement and application support The insert’s standardised designation and clear grade labelling simplify tool selection and inventory management. Technical teams benefit from the familiar ISO-based coding and the documented material suitability, which reduces decision time during process planning. For clients seeking application optimisation, consultation on cutting data and insert clamping arrangements can further enhance performance and tool life in serial production environments. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts with WKP35S grade, including application data and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: P2841S-5N-E57-WKP35S-WALTER Article designation: P2841S-5N-E57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Core facts Grade: WKP35S Coating series: Tiger·tec Silver Chipbreaker: 5N-E57 Suitable for: Steel (P), Cast iron (K) Special features Coated carbide substrate Optimised chip control Designed for productive machining Stable chip formation FAQ What materials are suitable for this insert? The insert is designed for machining steel and cast iron (ISO groups P and K); the WKP35S grade and Tiger·tec Silver coating balance toughness and wear resistance for these materials. How does the 5N-E57 chipbreaker affect performance? The 5N-E57 chipbreaker promotes short, controlled chips, improving swarf evacuation and surface quality in drilling and counterboring operations with steel and cast iron. Is this insert compatible with standard indexable drill bodies? The insert follows indexable insert conventions; compatibility depends on the drill body clamping and seat geometry matching the P2841S-5N-E57 insert designation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not indicate any affiliation with or endorsement by the trademark owners. The described article is an original, brand-new product supplied by the manufacturer.
P2841S-5N-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a combination of reliable edge stability and wide material versatility for consistent machining results; the coated Tiger·tec Gold grade ensures durable performance and controlled chip formation. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. P2841S-5N-E57 WSP45G — drilling and boring indexable insert, Tiger·tec Gold (Walter Tools) The P2841S-5N-E57 WSP45G is an indexable insert designed for drilling and bore-enlargement operations, offering a versatile PVD-coated grade for demanding work on steel, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold coated carbide grade WSP45G Optimised 5N-E57 chipbreaker for stable chips Suitable for steel, rostfreier Stahl and superalloys Robust edge for elevated thermal loads Predictable chip control and prolonged edge life The combination of the Tiger·tec Gold coating and the WSP45G grade provides reliable wear resistance and temperature tolerance, which together improve edge life under intermittent and continuous cutting conditions. The 5N-E57 chipbreaker is engineered to produce short, controllable chips during bore enlargement and drilling, reducing the risk of chip entanglement and promoting uninterrupted machining cycles. This results in fewer interruptions and a steadier process flow, especially when working with stickier or tougher batches. Higher process security and efficiency in production A consistent cutting edge reduces variability in part quality and cycle time, delivering tangible improvements in process security and overall productivity. The coated carbide substrate supports stable cutting when encountering fluctuating material properties or heat loads, so cycle-to-cycle reproducibility is enhanced. For production environments where repeatability matters, this insert contributes to predictable tool-change intervals and more stable surface finishes on the machined bore. Clear suitability guidance for common application groups The insert was developed for the ISO material groups P, M and S: that is, steel, rostfreier Stahl (stainless steel) and superalloys or titanium-containing materials. In practice, this means the grade copes with both the high heat generation seen in steels and the adhesive tendencies of rostfreier Stahl, while offering sufficient edge stability for nickel- and cobalt-based alloys. Choose cutting parameters that favour controlled chip evacuation and moderate engagement for the best balance between tool life and productivity. For machining tasks that demand consistent chip control and durable cutting performance from a trusted brand, contact Metav Werkzeuge to discuss the P2841S-5N-E57 WSP45G insert by Walter Tools and check availability or application-specific recommendations by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: P2841S-5N-E57-WSP45G-WALTER Brand: Walter Tools Product type: Drilling/boring indexable insert Grade: WSP45G Facts Chipbreaker: 5N-E57 Material group suitability: P / M / S Series: Tiger·tec Gold SKU: P2841S-5N-E57-WSP45G-WALTER Special features PVD-coated carbide grade Versatile for drilling, bore enlargement and milling-related operations Designed for stable chip formation and enhanced edge stability FAQ What materials can this insert machine effectively? The P2841S-5N-E57 WSP45G insert from Walter Tools is suitable for machining steel, rostfreier Stahl and heat-resistant superalloys, covering the ISO groups P, M and S. What advantages does the Tiger·tec Gold grade provide? The Tiger·tec Gold coating on the WSP45G grade enhances wear resistance and thermal stability, which supports longer tool life and consistent performance in demanding operations. How does the 5N-E57 chipbreaker affect machining? The 5N-E57 chipbreaker produces short, manageable chips that improve evacuation and help maintain a stable cutting edge, reducing downtime due to chip-related issues when using the insert. Is this insert suitable for milling as well as drilling? Yes; although designed for drilling and bore enlargement, the WSP45G grade is described as versatile and performs well in many milling-related operations where similar chip control and edge stability are required. What practical benefit does the coated carbide substrate deliver? The coated carbide substrate offers a combination of toughness and thermal resistance that reduces flank and crater wear, supporting repeatable part quality and extended intervals between tool changes. Die Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names and trademarks is for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product from the listed brand.
P2841S-5N-E57 WXP40 Wendeplatten - Walter Tools
High productivity and stable chip control result from the combination of the WXP40 uncoated carbide grade and the 5N‑E57 chipbreaker, delivering consistent performance in drilling and bore‑enlargement operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching. P2841S-5N-E57 WXP40 – drilling/boring indexable insert with 5N‑E57 chipbreaker (Walter Tools) P2841S-5N-E57 WXP40 is an indexable insert developed for drilling and bore‑enlargement tasks, designed to provide controlled chip formation and repeatable machining results in production environments. Uncoated carbide grade WXP40 Chipbreaker 5N‑E57 for reliable chips Built for drilling and boring operations Walter cutting‑grade, open series Increased throughput through predictable chip formation The combination of the WXP40 grade and the 5N‑E57 chipbreaker is engineered to promote stable chip formation, which reduces interruptions and tool handling during batch production. The uncoated carbide substrate delivers consistent cutting geometry and predictable wear behaviour, enabling longer tool life under appropriate conditions. For process planners, the clear chip control translates into fewer stoppages and a more continuous machining cycle, contributing directly to overall productivity and shop‑floor efficiency. Reliable behaviour in production drilling and bore enlargement Designed as a drill/boring indexable insert, this component targets repeatable results in production setups. The uncoated carbide composition supports steady cutting edges, and the open series configuration provides flexibility for integration into a range of tool bodies. While the insert offers broad performance characteristics, suitability for specific workpiece materials should be verified against the manufacturer’s product matrix to ensure optimal cutting parameters and process stability. Correct selection of feeds and speeds is essential to exploit the insert’s strengths. Practical process guidance and integration tips For integration into existing tool systems, attention to clamping stability and toolholder condition will enhance the repeatability of results. The chipbreaker geometry aims to produce controllable chips across a range of cutting conditions; pairing the insert with appropriate coolant strategy and rigid setup will support surface quality and tool life. When material compatibility or unusual alloys are involved, consult the technical documentation to check the material matrix and recommended cutting data before series use. This pragmatic approach reduces trial time and helps maintain consistent output. Contact Metav Werkzeuge for application advice and request the Walter Tools P2841S-5N-E57 WXP40 insert to evaluate chip control and process suitability Technical data SKU: P2841S-5N-E57-WXP40-WALTER Article designation: P2841S-5N-E57 WXP40 Product type: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Manufacturer: Walter Tools Material: Katalogabhängig Core data No measurable technical data provided in the dataset Special features Grade: WXP40 (uncoated carbide) Chipbreaker: 5N‑E57 Series: Walter cutting grade – open series Designation indicates geometry and chipbreaker for drilling/boring applications FAQ Which workpiece materials is this insert suitable for? Suitability depends on the specific product matrix; the WXP40 grade is an uncoated carbide intended for a range of applications, but the P2841S‑5N‑E57 WXP40 insert should be checked against the manufacturer’s material matrix for exact compatibility. Is the P2841S‑5N‑E57 WXP40 insert coated? No — the WXP40 designation denotes an uncoated carbide grade designed to deliver consistent edge geometry and wear behaviour. What chip control can be expected from the 5N‑E57 chipbreaker? The 5N‑E57 chipbreaker is engineered for controlled chip formation in drilling and bore‑enlargement operations, improving process reliability when matched with suitable cutting data. Can this insert be used for high‑speed applications? High‑speed suitability is not specified in the provided dataset; reference the product matrix and cutting recommendations to determine whether the P2841S‑5N‑E57 WXP40 is appropriate for elevated cutting speeds. How does the designation P2841S‑5N‑E57 inform geometry and application? The code reflects the insert geometry and the 5N‑E57 chipbreaker type; this indicates the intended chip control and primary application area for drilling/boring. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only and to explain compatibility or origin. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the listed manufacturer.
P2841S-5N-E67 WKP35S Wendeplatten - Walter Tools
Benefit from a tool combination that prioritises productivity and consistent edge life: the Tiger·tec Silver coating paired with the WKP35S grade delivers stable chip formation and reliable performance when machining steel and cast iron. Order the P2841S-5N-E67 WKP35S insert directly via Metav Werkzeuge or consult our specialists for application advice. P2841S-5N-E67 WKP35S – Drilling/Boring indexable insert for steel and cast iron by Walter Tools The P2841S-5N-E67 WKP35S is a drilling/boring indexable insert designed for productive metalcutting, optimised specifically for machining steel and cast iron in industrial production environments. Tiger·tec Silver coating for extended life WKP35S grade for reliable edge stability Optimised for steel and cast iron machining Stable chip formation and productive cutting Increased process throughput for steel and cast iron workpieces This insert is engineered to raise machining efficiency in repetitive drilling and boring operations. The combination of the Tiger·tec Silver coating and the specified geometry reduces flank wear and extends life, which translates into fewer tool changes and shorter downtime. For manufacturers processing ISO group P (steel) and K (cast iron), the result is a measurable increase in throughput and a predictable tool maintenance schedule, supporting leaner production flows and improved overall equipment effectiveness. Coating and grade that protect the cutting edge under load The WKP35S grade is a coated cemented carbide designed to withstand the thermal and abrasive stresses typical of steel and cast iron cutting. The Tiger·tec Silver coating improves heat resistance and reduces adhesion, which maintains a sharp cutting edge for longer. In practice, this means consistent hole quality over longer tool life and fewer scrap parts; the technology is particularly beneficial where stable dimensional accuracy and surface finish are required across long production runs. Better chip control and stable cutting behaviour A tailored chipbreaker geometry (5N-E67) promotes predictable chip formation and evacuation during drilling and boring, reducing the risk of chip re-cutting and improving surface integrity. Stable chip control not only protects the workpiece finish but also reduces vibration and cutting forces, which supports higher cutting parameters where the machine and setup allow. The result is improved component quality and a more efficient cycle time per hole or bore. Compatibility and straightforward integration into existing toolsets The insert designation and geometry align with common drill and boring tool holders used in industrial workshops and machining centres. The P2841S-5N-E67 form factor makes retrofitting into compatible tool bodies straightforward, allowing rapid implementation without extensive process changes. For applications in medium- to high-volume production, the insert supports consistent results across batches and simplifies inventory by focusing on a robust, multi-material grade. For demanding machining of steel and cast iron, contact Metav Werkzeuge to source the Walter Tools P2841S-5N-E67 WKP35S insert and discuss optimisation for specific machines and cutting conditions Technical Data Article number: P2841S-5N-E67-WKP35S-WALTER Designation: P2841S-5N-E67 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Material compatibility: P / K Facts ISO groups: P (steel), K (cast iron) Chipbreaker: 5N-E67 Grade: WKP35S Special features Coating: Tiger·tec Silver Insert type: Drilling/boring indexable insert Main applications: Steel machining, Cast iron machining Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The P2841S-5N-E67 WKP35S insert is suitable for steel and cast iron, corresponding to ISO groups P and K, and is optimised for those material behaviours. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade improves heat resistance and reduces adhesion, which extends tool life and supports stable cutting performance in repetitive drilling and boring operations. Can this insert be used in standard drilling holders? Yes, the P2841S-5N-E67 form factor is compatible with matching drilling and boring tool holders; integration into existing toolsets is straightforward where the holder accepts this insert geometry. What is the primary advantage of the 5N-E67 chipbreaker? The 5N-E67 chipbreaker promotes predictable chip formation and evacuation, reducing the chance of chip interference and contributing to consistent surface quality and dimensional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P2841S-5N-E67 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a versatile WSP45G grade to ensure stable cutting edges and reliable chip control across steels, stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. P2841S-5N-E67 WSP45G drilling/bore indexable insert — Tiger·tec Gold by Walter Tools P2841S-5N-E67 WSP45G is a coated carbide indexable insert developed for drilling and bore-enlarging operations in demanding materials. Tiger·tec Gold PVD coating for enhanced edge life Suitable for steel, stainless steel and superalloys Stable cutting edge for consistent performance Chip control system 5N-E67 for reliable swarf evacuation Reliable performance across demanding alloys The combination of the Tiger·tec Gold coating and the WSP45G alloy delivers a balance of wear resistance and fracture toughness that supports productive metalcutting in the P/M/S groups. In practice this means secure machining of unalloyed and alloyed steel, of stainless steel grades prone to built-up edge, and of temperature-resistant superalloys or titanium where heat is concentrated at the cutting zone. The applied PVD coating reduces flank wear and helps maintain a stable cutting edge, which minimises unexpected tool changes and supports predictable batch throughput. For engineers seeking a solution that copes with mixed workpiece fleets, the material range coverage reduces inventory complexity while maintaining surface quality. Higher productivity through controlled chip formation The designated chipbreaker 5N‑E67 is optimised for consistent swarf formation in interrupted and continuous drilling cycles, enhancing evacuation and reducing recutting. Effective chip control lowers cutting forces and moderates temperature peaks at the tool–workpiece interface, which in turn extends the insert life and improves process economy. The coated carbide substrate used in this grade resists edge breakdown during elevated temperatures typical of drilling and reaming in tougher alloys. As a rational benefit, the insert supports longer tool life and fewer tool changes per shift, contributing directly to reduced cycle times and lower cost per hole. Seamless integration and dependable workshop handling The insert is identified as P2841S-5N-E67 and conforms to common indexable toolholders for drilling and bore-enlarging operations, simplifying retrofitting into existing tool systems. Indexable inserts like this one permit quick replacement without regrinding, which reduces machine downtime and supports fast tool change procedures on the shop floor. Technical teams will appreciate the clear designation and the ability to standardise on a coated carbide grade that performs across multiple material classes, facilitating consistent setup sheets and tool lists. For procurement and process planning, the insert’s versatile profile supports both small-batch flexibility and high-volume stability. For tailored recommendations on using Walter Tools Tiger·tec Gold inserts in specific applications, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — and request guidance for optimal toolholder compatibility and cutting strategies Technical Data SKU: P2841S-5N-E67-WSP45G-WALTER Name: P2841S-5N-E67 WSP45G drilling/bore indexable insert Manufacturer: Walter Tools Product type: Indexable insert (drilling/bore) Facts Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: 5N-E67 Material groups: P / M / S Special features Coating: Tiger·tec Gold (PVD) Substrate: Coated carbide Application: drilling and bore-enlarging operations Designation: P2841S-5N-E67 FAQ What materials can this insert machine reliably? The insert is specified for the P / M / S groups, meaning it is suitable for steel, stainless steel and heat-resistant superalloys or titanium; the WSP45G grade supports these material families. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold PVD coating reduces flank wear and improves thermal resistance, which helps the insert maintain a stable cutting edge and extends life under typical drilling loads. Is the chipbreaker suitable for interrupted drilling? Yes — the 5N‑E67 chipbreaker is designed to produce manageable chips and reliable evacuation during both continuous and interrupted cutting conditions. Which designation should be ordered to match this insert? Order reference P2841S-5N-E67 WSP45G to ensure the correct geometry, chipbreaker and coating are supplied for drilling/bore applications. Can this insert be used across mixed production batches? The combination of the WSP45G grade and the Tiger·tec Gold series makes the insert a practical choice for mixed batches, reducing the need for numerous specialised grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is used here for identification and descriptive purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
P2841S-5N-E67 WXP40 Wendeplatten - Walter Tools
Benefit from a cost-efficient solution that pairs stable chip control with uncoated carbide performance for consistent boring operations; order the insert via Metav Werkzeuge or consult the advisors for application support. P2841S-5N-E67 WXP40 – boring/enlarging indexable cutting insert by Walter Tools, chipbreaker 5N‑E67 The P2841S-5N-E67 WXP40 is an indexable cutting insert engineered for precision boring and enlargement tasks in production and workshop environments, offering controlled chip formation and predictable edge life. Uncoated carbide grade WXP40 Chipbreaker 5N‑E67 for predictable chips Optimised for boring and enlargement operations Stable chip control for uninterrupted machining The insert delivers predictable chip formation thanks to the integrated 5N‑E67 chipbreaker, which reduces the risk of long, stringy swarf and minimises downtime caused by chip entanglement. Predictable chips improve process reliability and allow higher feed rates without compromising surface finish. For operations that demand continuous throughput, the combination of the WXP40 grade and the dedicated chip geometry helps sustain machining cycles and reduces manual intervention. Efficient cutting at competitive cost-per-part Manufactured in an uncoated carbide composition, the grade focuses on a balance between toughness and wear resistance, resulting in a favourable cost-per-part ratio for medium-duty boring. The geometry of the insert supports stable cutting forces, which translates into reduced tool-change frequency and lower overall tooling costs. These practical benefits are particularly relevant in series production where predictable consumable behaviour directly affects productivity and budgeting. Consistent edge life and process security The insert’s substrate and geometry provide reliable edge retention, enabling repeatable results across batches. Edge stability contributes to consistent diameters and surface integrity during enlargement operations, which is essential for meeting tolerance requirements. Where tool life matters for process control, the insert supports an efficient balance between cutting performance and tool longevity, reducing the need for frequent requalification of setups. Easy selection and application guidance The grade designation and chipbreaker—WXP40 and 5N‑E67—indicate an uncoated carbide solution with a chipbreaking profile tailored to boring tasks; this allows straightforward matching to workpiece conditions when referenced against a tooling matrix. While the insert suits a range of common materials, the exact workpiece suitability should be verified against the product matrix to ensure optimal performance in specific alloys and hardness ranges. Technical consultation is recommended for novel or demanding materials. Handling and mounting considerations As an indexable unit, the insert simplifies tool handling and replacement, shortening downtime during maintenance. Correct clamping and seat cleanliness are decisive for repeatable results; the insert benefits from stable, rigid toolholding and consistent mounting torque. Following recommended operating parameters for feeds and speeds—adjusted according to material and machine capability—ensures the indexable insert reaches its designed performance level. Production support and traceable quality Choosing this insert aligns with a pragmatic approach to machining: stable chip control, clear material classification, and a proven geometric concept enable predictable process outcomes. For operators seeking support with parameter selection or adaptation to specific machines, expert guidance helps integrate the insert seamlessly into existing toolsets and machining cycles, contributing to measurable production gains. For application advice, availability or tailored recommendations on Walter Tools inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge provides practical support and rapid delivery options. Technical data Article number: P2841S-5N-E67-WXP40-WALTER SKU: P2841S-5N-E67-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-5N-E67 WXP40 Walter Tools Facts Grade: WXP40 Chipbreaker: 5N‑E67 Series: Walter Schneidstoffsorte - Serie offen Special features Uncoated carbide substrate Indexable cutting insert for boring/enlargement Series designation indicates product matrix compatibility FAQ What materials is the insert suited for? The insert is based on the WXP40 uncoated carbide grade; suitability for specific materials should be checked in the manufacturer matrix and by consulting Metav Werkzeuge for recommendations tailored to the application. How does the 5N‑E67 chipbreaker affect machining? The 5N‑E67 chipbreaker promotes compact, predictable chips that ease chip evacuation and reduce the likelihood of swarf-related interruptions during boring and enlargement tasks. Can the insert be rotated to extend service life? As an indexable unit, the insert can be indexed to present a fresh cutting edge when the geometry permits, extending tool life and maintaining dimensional accuracy without full tool replacement. Is this insert suitable for high-speed cutting? The uncoated carbide design provides a balance of toughness and wear resistance; high-speed suitability depends on workpiece material and machine capability—refer to process parameters or contact Metav Werkzeuge for optimisation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P2841S-5N-F57 WKP35S Wendeplatten - Walter Tools Technical details: - Coating: Tiger-tec Silver - Material: P / K - Suitable for steel - Suitable for cast iron
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for consistent, productive machining of steel and cast iron; order directly via Metav Werkzeuge or consult our team for application-specific cutting data. P2841S-5N-F57 WKP35S – Drill/bore indexable insert for steel and cast iron | Walter Tools The P2841S-5N-F57 WKP35S is a drill and bore-enlargement indexable cutting insert designed for reliable performance in steel and cast iron machining. Tiger·tec Silver coating for longer service life WKP35S grade optimised for steel and cast iron Coated carbide for reliable, repeatable cutting Stable chip formation for productive machining Consistent productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade delivers measurable improvements in process stability and tool life. The coating reduces abrasive wear and heat impact, which in turn supports longer intervals between insert changes and fewer unplanned tool interventions. For production environments working with steel and cast iron, this results in higher machine uptime and a more predictable manufacturing process. Controlled chip formation and geometry that aid throughput Equipped with the 5N-F57 chipbreaker, this indexable insert manages chip flow to reduce interruptions and improve surface finish. The geometry promotes short, controllable chips when machining the ISO P and K materials, which lowers the risk of surface damage and tool marling. As a consequence, cycle times can be stable or reduced while maintaining consistent part quality — a crucial advantage in medium- to high-volume operations. Simplicity in selection and repeatable cutting results The insert’s specification — including the ISO designation and the WKP35S sort — makes it straightforward to match to common drilling and bore-enlargement toolholders and cutting conditions used in industry. The coated carbide construction ensures repeatable cutting behaviour, helping to standardise processes across batches and operators. Technical teams benefit from clearer tool life expectations and fewer trial-and-error adjustments at setup. Request expert guidance from Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver WKP35S inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P2841S-5N-F57-WKP35S-WALTER Type: Drill/bore-enlargement indexable insert Grade: WKP35S Series: Tiger·tec Silver Facts Chipbreaker: 5N-F57 Applicable material groups (ISO): P (steel), K (cast iron) Material composition: Coated carbide Special features Coating: Tiger·tec Silver Suitability: Steel machining Suitability: Cast iron machining Sort: WKP35S Product family: Tiger-tec Silver FAQ What materials are suitable for this insert? The P2841S-5N-F57 WKP35S insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Silver coating benefit cutting performance? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and thermal impact, extending tool life and improving process reliability during drilling and bore-enlargement operations. What is the role of the 5N-F57 chipbreaker? The 5N-F57 chipbreaker controls chip shape and evacuation, promoting short, consistent chips in steel and cast iron and reducing the likelihood of tool or workpiece damage. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
P2841S-5N-F57 WSP45G Wendeplatten - Walter Tools - Coating: Tiger-tec Gold (PVD) - Material: P / M / S - Suitable for steel - Suitable for stainless steel - Application: milling-oriented, versatile cutting tasks
Take advantage of the combination of the Tiger·tec Gold coating and the 5N‑F57 chipbreaker to achieve stable edge life and consistent chip control across Stahl, rostfreier Stahl and heat‑resistant alloys; the result is predictable process performance and reduced downtime. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. P2841S-5N-F57 WSP45G Drill/Boring Indexable Insert – Tiger·tec Gold, 5N‑F57 (Walter Tools) The P2841S-5N-F57 WSP45G is a coated carbide insert engineered for drilling and boring operations, optimised for use in Stahl, rostfreier Stahl and high‑temperature superalloys. Tiger·tec Gold PVD coating for high wear resistance Versatile for Stahl, rostfreier Stahl and superalloys 5N‑F57 chipbreaker for reliable chip control Coated carbide grade WSP45G for stable cutting edges High‑performance coating for longer tool life and predictable output The Tiger·tec Gold series brings a PVD‑based surface treatment that improves wear resistance and heat management on the cutting edge. Combined with the WSP45G grade, the indexable insert offers a balance between toughness and hardness that supports sustained cutting in demanding materials such as Stahl and rostfreier Stahl. This coating technology reduces flank wear and contributes to a more consistent tool life, which in turn lowers the variability in cycle times and scrap rates. The result is enhanced process reliability and easier planning for production cycles. Precise chip control and edge stability for safer machining The engineered 5N‑F57 chipbreaker promotes controlled chip formation during drilling and boring, reducing the risk of built‑up edge and erratic chip flow. Stable chips make coolant and chip evacuation more effective and improve surface integrity, leading to better surface finish and reduced rework. The insert’s combination of a coated carbide base and a tailored chipbreaker supports continuous and interrupted cuts alike, enabling secure machining of tougher alloys while maintaining a robust cutting edge. Compatibility with common tool systems and production workflows As a drill/boring indexable insert, this component integrates into standard toolholders and is suited to high‑productivity environments that demand repeatable results. The insert’s suitability for the ISO material groups P, M and S means one grade covers a broad spectrum of applications—from general machining of Stahl to the tougher demands of rostfreier Stahl and heat‑resistant superalloys. This versatility helps to reduce tool inventory complexity and supports faster job changeovers, contributing to overall shop‑floor efficiency and lower total machining costs. Choose the Walter Tools Tiger·tec Gold WSP45G insert for dependable process security and contact Metav Werkzeuge for tailored recommendations and rapid availability Technical data Article number: P2841S-5N-F57-WSP45G-WALTER Designation: P2841S-5N-F57 WSP45G Product type: Drill/boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Applicable material groups: P / M / S Chipbreaker: 5N‑F57 Grade: WSP45G Special features Coating: Tiger·tec Gold (PVD) Base material: coated carbide Suitable for: Stahl, rostfreier Stahl, heat‑resistant superalloys and titanium Intended use: drilling and boring applications FAQ What materials can be machined with this insert? The P2841S-5N-F57 WSP45G is designed for machining across ISO groups P (Stahl), M (rostfreier Stahl) and S (heat‑resistant superalloys), offering a single‑grade option for a wide material range. How does the 5N‑F57 chipbreaker affect performance? The 5N‑F57 chipbreaker ensures controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built‑up edge when using the WSP45G grade in drilling and boring operations. Is the coating suitable for high‑temperature applications? Yes. The Tiger·tec Gold PVD coating enhances heat resistance and wear protection, making the insert appropriate for elevated cutting temperatures encountered with rostfreier Stahl and superalloys. Which toolholders are compatible with this indexable insert? The insert fits standard drill and boring toolholders specified for this insert designation; toolholder selection should match the insert geometry and the intended machining parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
P2841S-5N-F57 WXP40 WXP40 Wendeplatten - Walter Tools
Take advantage of a robust combination of uncoated carbide WXP40, a dedicated chipbreaker 5N-F57 and an ISO-stamped insert for consistent drilling and boring cycles; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. P2841S-5N-F57 WXP40 drilling/boring indexable insert by Walter Tools — uncoated carbide, chipbreaker 5N‑F57 The P2841S-5N-F57 WXP40 is an indexable insert designed for drilling and boring operations where reliable chip control and repeatable performance are required. Uncoated carbide WXP40 grade Chipbreaker 5N-F57 for controlled chips ISO designation P2841S-5N-F57 simplifies ordering Open series for broad application range Productivity and process reliability for drilling and boring The cutting geometry is optimised to support steady material removal during drilling and bore enlargement, delivering measurable improvements to cycle stability and tool life. With an emphasis on process reliability, the insert’s design reduces vibration and promotes consistent cutting conditions, which in turn supports predictable machining outcomes. Using an ISO-based designation makes tool management and replenishment straightforward for production planning and procurement teams. Material grade and chip control explained for safer machining The WXP40 grade denotes an uncoated carbide composition aimed at general-purpose metalcutting; paired with the chipbreaker 5N‑F57, the insert channels chips away from the cutting zone to reduce recutting and heat concentration. For shops unfamiliar with chipbreaker nomenclature: the chipbreaker is a micro-geometry that shapes and fragments the swarf, improving evacuation in through-tool or flute-assisted drilling. Material compatibility should be verified in the manufacturer’s product matrix to ensure the grade matches the intended workpiece. Handling, integration and selection guidance for streamlined operations As an indexable cutting component, the insert fits into standard compatible tool bodies and supports quick replacement to minimise downtime. Identification by the ISO-style code simplifies inventory labelling and reduces the risk of mismatches on the shop floor. When selecting the appropriate insert and holder combination, consider cutting parameters and coolant strategy to maximise the benefit of the uncoated carbide composition and the 5N‑F57 chipformer. If additional technical measurements or application-specific recommendations are required, documentation and matrix data are available for consultation. For high-process reliability choose Walter Tools inserts and contact Metav Werkzeuge for availability and tailored advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: P2841S-5N-F57-WXP40-WALTER Article: P2841S-5N-F57 WXP40 Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Facts Chipbreaker: 5N-F57 Grade: WXP40 Series: Walter Schneidstoffsorte - Serie offen ISO designation: P2841S-5N-F57 UID: P2841S-5N-F57-WXP40-WALTER Special features Material specification: Katalogabhängig Uncoated carbide (sort description indicates uncoated hardmetal) Designed for drilling and boring applications Sorteneinsatz: check product matrix for material suitability Base designation: P2841S-5N-F57 FAQ What materials is this insert suitable for? Material suitability must be checked in the product matrix; the WXP40 grade is an uncoated carbide family intended for broad application ranges, so verify the workpiece material against the manufacturer's recommendations. What is the purpose of the 5N‑F57 chipbreaker? The 5N‑F57 chipformer shapes and breaks swarf to improve evacuation from the cutting zone, reducing recutting and temperature build-up during drilling and boring cycles. How can the insert be identified for reordering? Order using the ISO-style designation P2841S-5N-F57 WXP40 or the SKU P2841S-5N-F57-WXP40-WALTER to ensure the correct geometry and grade are supplied. Is the insert coated? The insert is described as an uncoated carbide grade (WXP40); no coating is indicated in the product data. Can this insert be used with standard holders for drilling/boring? Yes, the indexable design is intended for compatible toolholders; ensure the holder accepts the P2841S form and that recommended cutting parameters are observed. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is original, factory-new goods of the manufacturer.
P2841S-6N-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for reliable chip control and extended tool life; the optimised 6N‑A57 chipformer reduces interruptions in steel and cast-iron production. Order the insert directly via Metav Werkzeuge or contact the technical consultants for specification support. P2841S-6N-A57 WKP25S – Drilling/Reaming Indexable Insert, Tiger‑tec Silver, for Steel & Cast Iron | Walter Tools The P2841S-6N-A57 WKP25S is a drilling and bore‑enlargement indexable insert engineered for productive removal of material in steel and cast iron operations, combining a coated carbide grade with an optimised chipformer for stable cutting conditions Tiger‑tec Silver coating for wear resistance Optimised 6N‑A57 chipformer for chip control Suited to ISO P (steel) and K (cast iron) machining Improved throughput through consistent chip control and coating technology The combination of the Tiger‑tec Silver technology and the WKP25S coated carbide grade delivers tangible improvements in cutting stability and reduced flank wear during drilling and bore‑enlargement operations. The 6N‑A57 chipformer is designed to shape and evacuate chips reliably under the thermal and mechanical loads typical for ISO P and K groups, which helps to maintain feed rates and reduce unplanned stoppages. By promoting predictable chip breakage and evacuation, the insert supports higher machine utilisation and contributes to lower manufacturing costs per hole. Predictable tool life and surface quality for production environments The coated carbide construction and series design offer an advantageous balance between wear resistance and edge toughness, which translates into more reproducible component surfaces and fewer rejected parts. With the WKP25S grade, abrasive wear from cast‑iron machining is managed while retaining the edge integrity needed for steel workpieces. This predictability in wear behaviour makes process planning simpler and reduces the frequency of changeovers, supporting continuous production and improved economic efficiency. Easy specification and integration into tool families The geometry and designation of the insert are structured to allow selection according to toolholder and application geometry; catalogue‑ and geometry‑dependent deployment ensures the right grade is matched to the task. The insert’s assigned code and chipformer identify its intended role clearly, making procurement and tool inventory management straightforward for workshop managers and production engineers. Documentation of grade, chipbreaker and series simplifies ordering and ensures reproducibility across batches. Application guidance and practical advantages in use For machining tasks that alternate between steel and cast iron, the coated grade offers broad applicability and reduced setup complexity compared with single‑purpose grades. The insert supports finishing and semi‑finishing drilling/reaming operations where consistent chip formation and edge stability are required. Selection of the correct tool geometry remains important; the P2841S‑type designation and 6N‑A57 chipformer indicate the intended application profile, enabling process engineers to align cutting data with material group recommendations for reliable results. For application support or assistance selecting the P2841S-6N-A57 WKP25S Tiger‑tec Silver grade for specific tool geometries, contact Metav Werkzeuge for tailored advice and order processing Technical data Article number: P2841S-6N-A57-WKP25S-WALTER Product: Drilling/reaming indexable insert P2841S-6N-A57 WKP25S Manufacturer: Walter Tools Facts Grade/series: Tiger‑tec Silver Cutting material designation: P / K Chipformer: 6N-A57 Special features Coated carbide grade WKP25S Optimised for steel and cast iron machining Catalogue/geometry-dependent main application FAQ Which materials is the insert suitable for? The P2841S-6N-A57 WKP25S insert is optimised for ISO P (steel) and ISO K (cast iron) applications and is designed to handle the typical thermal and mechanical conditions of these material groups. What benefit does the Tiger‑tec Silver series provide? The Tiger‑tec Silver series, embodied in the WKP25S grade, offers a balance of wear resistance and edge toughness that supports longer tool life and consistent surface quality in drilling and bore‑enlargement tasks. How does the 6N‑A57 chipformer affect machining? The 6N‑A57 chipformer promotes controlled chip breakage and evacuation, reducing the risk of chip entanglement and helping to maintain steady feeds and speeds during production. Is the insert intended for finishing or roughing operations? The insert is suitable for both finishing and semi‑finishing drilling/reaming where stable chip formation and edge integrity are required; final application depends on toolholder geometry and process parameters. How should the grade be selected for mixed production of steel and cast iron? For mixed production, the WKP25S grade within the Tiger‑tec Silver family provides versatile performance across steel and cast‑iron tasks; match the insert geometry and cutting data to the specific hole size and machine capacity for best results. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-6N-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and WKP35S grade for longer tool life and reliable chip control in demanding steel and cast iron operations; order directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. P2841S-6N-A57 WKP35S drilling/reaming indexable insert – Tiger·tec Silver, for steel and cast iron | Walter Tools P2841S-6N-A57 WKP35S is a drilling/reaming indexable insert designed for productive machining of steel and cast iron components Tiger·tec Silver coating for extended life WKP35S coated carbide for robust cutting 6N-A57 chipbreaker ensures controlled chips Suited to steel and cast iron machining Consistent cutting performance and extended tool life The insert’s Tiger·tec Silver technology combines a wear-resistant coating with a tailored substrate to reduce flank and crater wear. This coated carbide construction improves thermal and mechanical resistance, which translates into longer tool life and fewer interruptions for tool changes. For manufacturing operations that prioritise uptime, the optimised coating and grade selection deliver predictable performance across batch runs. The technical choice of a coated grade helps manage heat and adhesion during high-contact drilling and reaming operations, ensuring repeatable results and stable edge life. Precise chip control for reliable surface quality With the 6N-A57 chipbreaker geometry, the insert provides dependable chip control in both short and mixed-chip conditions typical of steel and cast iron. Good chip formation reduces re-cutting, protects the cutting edge and helps maintain a consistent surface finish on the machined bore. The ISO groups P and K identify the insert’s compatibility with steel and cast iron, respectively, so the geometry and grade are matched to the thermal and abrasive characteristics of those materials. For workshops seeking fewer stoppages and improved process stability, predictable chip evacuation directly supports higher machine efficiency. Efficient machining and application guidance Designed as a drilling/reaming indexable insert, this variant supports productive operations where indexable solutions are preferred over solid tools for economical tooling costs and quick edge changes. The combination of a robust WKP35S grade and a proven chipbreaker reduces the frequency of regrinds and replacements, improving overall cost-efficiency in production. For mixed fleets and varying batch sizes, selecting an insert with this balance of wear resistance and chip control simplifies tooling decisions and contributes to consistent part quality. For customers with specific cycle times or bore requirements, process parameters can be adjusted to exploit the coating and geometry benefits fully. For high-process reliability with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for expert machining advice and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P2841S-6N-A57-WKP35S-WALTER Article designation: P2841S-6N-A57 WKP35S Type: drilling/reaming indexable insert Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 6N-A57 Material suitability: P / K (steel / cast iron) Manufacturer: Walter Tools Facts ISO material groups: P, K Material substrate: coated carbide Intended applications: drilling, reaming Special features Coating technology: Tiger·tec Silver Sort: WKP35S (coated carbide) Optimised for heat and abrasive wear resistance Designed for stable chip formation and process security FAQ What materials is this insert suitable for? The insert is specified for ISO groups P and K, meaning compatibility with steel and cast iron applications when using the P2841S-6N-A57 WKP35S insert from Walter Tools. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating offers improved wear resistance and thermal stability for the WKP35S grade, resulting in longer edge life and fewer tool changes under typical drilling and reaming loads. What benefit does the 6N-A57 chipbreaker provide? The 6N-A57 chipbreaker controls chip shape and flow to reduce re-cutting and support a consistent surface finish, especially beneficial when machining mixed chip-forming steels and cast irons. Can this insert be used for high-speed operations? The combination of coated carbide and optimised chip geometry supports elevated cutting conditions; final parameters should be set according to machine capability and the specific workpiece material. Is this insert suitable for small-batch production and large series? Yes; the balance of wear resistance and chip control in the WKP35S grade makes the insert appropriate for both single-part prototyping and extended production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are used for clarification only. The offered item is an original, factory-new product of the manufacturer.
P2841S-6N-A57 WSP45G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the robust 6N‑A57 chipbreaker for longer tool life, secure chip control and consistent results when machining Stahl, rostfreier Stahl and heat‑resistant alloys. Order the P2841S‑6N‑A57 WSP45G directly via Metav Werkzeuge or consult our technical advisors for application support. P2841S-6N-A57 WSP45G – drill/reaming indexable insert, Tiger·tec Gold, for Stahl/M/S, Walter Tools The P2841S-6N-A57 WSP45G is a drill/reaming indexable insert engineered for high‑productivity metalcutting in Stahl, rostfreier Stahl and superalloys; optimised for secure chip formation and extended tool life. Tiger·tec Gold PVD for extended tool life Stable 6N‑A57 chipbreaker for reliable chips Versatile for Stahl, rostfreier Stahl and superalloys Consistent chip control for uninterrupted production The combination of the 6N‑A57 chipbreaker and a precisely ground geometry provides reliable chip control, reducing recutting and machine downtime. A stable chip flow minimises the risk of built‑up edge and tool breakage, which leads to more predictable cycle times and fewer interruptions during serial production. The insert’s geometry is tailored for effective evacuation of chips in both drilling and boring operations, supporting continuous machining sequences and smoother tool change routines. Material versatility: from Stahl to high‑temperature alloys Rated for material groups P, M and S, this grade covers unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. The letters denote the workpiece groups according to ISO classification: P = Stahl, M = rostfreier Stahl, S = superalloys/Titan. This broad applicability means fewer tool variants are required on the shop floor and simplifies tool selection for mixed‑material batches, helping to streamline inventory and job setup. Durable coating and edge stability for longer service life The Tiger·tec Gold PVD coating on coated carbide substrate improves wear resistance and maintains a stable cutting edge under thermal and mechanical stress. PVD coating enhances surface hardness while preserving toughness at the cutting edge, which is particularly beneficial for intermittent cutting and demanding feeds. The result is reduced flank wear, extended index life and more consistent surface finishes — all contributing to lower overall tooling cost per part and higher process reliability. Contact Metav Werkzeuge today for tailored application advice and secure supply of the P2841S‑6N‑A57 WSP45G Tiger·tec Gold insert from Walter Tools Technical data Article number: P2841S-6N-A57-WSP45G-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte (drill/reaming indexable insert) Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: 6N‑A57 Material designation: P / M / S Base designation: P2841S-6N-A57 Facts Material suitability: P = Stahl, M = rostfreier Stahl, S = superalloys/Titan Coating technology: Tiger·tec Gold (PVD) Grade family: WSP45G (coated carbide) Special features Coating: Tiger·tec Gold (PVD) Substrate: coated carbide Typical application: drilling and reaming inserts for demanding materials FAQ What materials can be machined with this insert? The P2841S‑6N‑A57 WSP45G insert is specified for P / M / S materials: that is mainly Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the 6N‑A57 chipbreaker benefit production? The 6N‑A57 chipbreaker promotes stable chip formation and evacuation, reducing the chance of recutting and improving process reliability when using the P2841S‑6N‑A57 WSP45G insert. What performance improvements does Tiger·tec Gold offer? The Tiger·tec Gold PVD coating increases wear resistance and edge life, delivering more consistent surface finish and longer index life under thermally demanding cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-6N-A57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of economical uncoated carbide, dependable chip control and suitability for drilling and reaming operations to keep production running smoothly; order original inserts from Metav Werkzeuge or consult our experts for application advice. P2841S-6N-A57 WXP40 drilling/reaming indexable insert – Walter Tools The P2841S-6N-A57 WXP40 drilling/reaming indexable insert delivers a robust cutting edge for high-output drilling and reaming tasks in industrial machining. Uncoated carbide grade WXP40 Chipbreaker 6N-A57 for chip control Designed for drilling and reaming Walter Tools quality and consistency High productivity through stable cutting performance The P2841S-6N-A57 WXP40 is an indexable insert specified for drilling and reaming operations where consistent material removal and repeatable edge performance are required. The WXP40 grade is an uncoated carbide designed to offer a balance between economy and cutting resistance; combined with the 6N-A57 chipbreaker, it supports controlled chip formation and evacuation. This results in fewer interruptions for chip clearance and a steadier cycle time, contributing to measurable productivity gains on repetitive or long-run machining tasks. Practical benefits for process reliability and tool life Built around a proven carbide composition, the insert prioritises stable chip formation and reliable edge behaviour under typical drilling and reaming loads. The Walter Tools specification emphasises broad process applicability and consistent tool life, making this insert suitable for users seeking predictable performance. As the grade is uncoated, the cutting behaviour is direct and easy to assess in trial cuts; final selection should be guided by the manufacturer's product matrix to match feed and speed ranges with specific workpiece materials. Simple integration into indexable tooling systems Indexable inserts reduce downtime thanks to multiple cutting edges and straightforward indexing; the P2841S-6N-A57 designation identifies the geometry and chipbreaker 6N-A57, which is optimised for chip control in axial drilling and bore-finishing steps. Installation into compatible holders is quick, and replacement is immediate when an edge is indexed, lowering overall maintenance effort. For precise application, verify holder compatibility and refer to the product matrix for recommended cutting data and material ranges to ensure peak performance in production environments. For high process reliability, choose Walter Tools inserts such as the P2841S-6N-A57 WXP40 and contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: P2841S-6N-A57-WXP40-WALTER Description: Bohr-/Aufbohrwendeschneidplatte P2841S-6N-A57 WXP40 Walter Tools Manufacturer: Walter Tools Grade: WXP40 Chipbreaker: 6N-A57 Facts No numerical specifications provided in the supplied data Special features Material: catalogue-dependent Carbide type: uncoated carbide Series: Walter Schneidstoffsorte - open series Insert designation: P2841S-6N-A57 Application note: Check material suitability in the product matrix FAQ What materials is this insert suitable for? Material suitability must be checked in the product matrix; the P2841S-6N-A57 WXP40 is an uncoated carbide grade intended for a broad range of machining tasks, with final selection depending on the workpiece material. Is the WXP40 grade coated? No, WXP40 is specified as an uncoated carbide grade for direct cutting behaviour and economical edge replacement. What advantage does the 6N-A57 chipbreaker provide? The 6N-A57 chipbreaker supports controlled chip formation and evacuation during drilling and reaming, improving process stability and reducing interruptions. Can this insert be used in any holder? The insert geometry is referenced by the designation P2841S-6N-A57; compatibility depends on the holder system—verify mechanical fit and clamping method before use. Manufacturer: Walter Tools; The Walter AG (brand: Walter Tools) with headquarters in Tübingen belongs to the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The described article is an original, factory-new product of the manufacturer.
P2841S-6N-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S grade for reliable edge life and consistent chip control, ensuring productive boring and reaming cycles in steel and cast iron; order directly via Metav Werkzeuge or contact the consultancy team for application advice. P2841S-6N-E57 WKP35S – Boring/reaming indexable insert, Tiger‑tec Silver (Walter Tools) The P2841S-6N-E57 WKP35S is an indexable insert engineered for productive enlargement and finishing operations on steel and cast iron, delivering stable chip control and extended tool life in industrial machining Tiger‑tec Silver coating for enhanced wear resistance WKP35S grade: coated carbide for reliable edge life Optimised for machining steel and cast iron Stable chip formation and consistent surface finish Reliable cutting performance that reduces cycle times The combination of the Tiger‑tec Silver coating and the WKP35S grade produces a hard-wearing cutting surface that resists abrasive wear while managing heat generation during aggressive cutting. This leads to longer edge life and fewer index changes, which supports uninterrupted production runs. For tooling planners and shopfloor engineers, this means reduced setup frequency and improved overall equipment effectiveness. The insert’s geometry and chipbreaker promote predictable chip flow, lowering the risk of built-up edge and improving dimensional stability across a series of holes Optimised for steel (P) and cast iron (K) applications Manufactured for the ISO P and K material groups, the insert is tailored to the thermal and mechanical demands of steel and cast iron. The chipbreaker designation 6N‑E57 is developed to handle the typical chip forms of these materials: long, stringy chips in many steels and shorter, breaking chips in cast iron. As a result, the insert provides consistent surface quality and repeatable bore tolerances, making it suitable for both roughing and semi-finish stages where machine uptime and part accuracy are priorities Coating and grade explained for straightforward selection The coated carbide construction offers a balance between toughness and wear resistance. The WKP35S grade is a coated hardmetal formulation optimised for stable cutting in a broad range of steels and many cast irons. The Tiger‑tec Silver coating enhances thermal resistance and reduces abrasive wear, which is particularly beneficial in high-material-removal operations. For purchasers and process engineers with limited metallurgical background, this means a versatile insert that minimises the need for multiple grades while maintaining process reliability Process considerations and pairing recommendations To exploit the insert’s strengths, select cutting parameters that match the material group and desired surface finish: moderate cutting speeds with stable feeds during roughing, increasing speed and reducing feed for semi-finishing where the coating’s wear resistance contributes to surface quality. The insert geometry supports secure clamping in standard boring heads; ensure correct seating and torque to maintain consistent runout and tool life. For challenging workpieces or special alloys, consult Metav Werkzeuge’s technical advisors for grade matching and optimisation For application guidance or to secure batch supply of Tiger‑tec Silver WKP35S inserts, contact Metav Werkzeuge’s specialists for tailored recommendations and ordering support Technical data SKU: P2841S-6N-E57-WKP35S-WALTER Designation: P2841S-6N-E57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Brand: Walter Tools Facts Material class: P / K Chipbreaker: 6N‑E57 Series: Tiger‑tec Silver Special features Grade: WKP35S (coated carbide) Suitable for: steel (P) and cast iron (K) Key benefits: wear resistance, stable chip formation, consistent surface finish FAQ What material groups is this insert suitable for? The P2841S-6N-E57 WKP35S insert is specified for ISO material groups P and K, making it suitable for various steels and cast irons How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal and abrasive resistance on the cutting edge, improving wear life and maintaining cutting stability under elevated temperatures What chip shape can be expected with the 6N‑E57 chipbreaker? The 6N‑E57 chipbreaker is designed to promote controlled chip formation: long chips in many steels and short, brittle chips in cast iron, aiding safe evacuation and surface consistency Can this insert be used for both roughing and finishing operations? Yes, the insert’s coated carbide grade and geometry allow it to perform in both roughing and semi-finishing stages, depending on selected cutting parameters Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
P2841S-6N-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSP45G grade for consistent edge stability and extended tool life; the insert is tailored for demanding drilling and bore-widening operations in Stahl and rostfreier Stahl. Order the P2841S-6N-E57 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. P2841S-6N-E57 WSP45G drilling/bore-widening indexable insert by Walter Tools — Tiger·tec Gold PVD, chipformer 6N‑E57 The P2841S-6N-E57 WSP45G is an indexable insert engineered for drilling and bore-widening tasks, offering high thermal resistance and stable cutting edges for steel, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating for edge stability Compatible with Stahl and rostfreier Stahl machining ISO-grade WSP45G for versatile applications Chipformer 6N‑E57 for reliable chip control Increased productivity through coating and grade The combination of Tiger·tec Gold technology and the WSP45G cutting grade results in markedly improved edge stability and wear resistance under elevated temperatures. This PVD-coated hardmetal formulation is designed to manage the typical heat and chip formation encountered when machining Stahl and rostfreier Stahl, reducing downtime for indexable insert changes and supporting a more predictable production flow. The technical design supports consistent cutting performance across interrupted and continuous cuts, which translates directly into higher throughput and fewer process interruptions. Safer machining and better surface quality with controlled chips The integrated 6N‑E57 chipformer in this insert facilitates efficient chip breaking and evacuation, reducing the risk of re-cutting and surface damage in bore operations. Effective chip control contributes to improved surface finish and dimensional consistency, particularly important in finishing passes and precision bore-widening. The insert’s geometry and coating work together to maintain a stable cutting edge, ensuring repeatable results and minimised tool-related scrap. For operations where thermal load and material adherence are concerns, this insert provides a robust solution. Practical selection and process advantages for workshop use Specifying the P2841S-6N-E57 WSP45G insert supports a wide range of applications thanks to its material suitability and proven coating technology. The designation P / M / S indicates compatibility with unalloyed and alloyed Stahl, rostfreier Stahl, and heat-resistant superalloys or titanium, allowing fewer tool variants in stock and simplifying inventory. The design also aims for stable chip formation and reliable edge life, which helps to lower overall machining costs through longer service intervals and consistent part quality. For shops seeking a balance of performance and economy, this insert is a strong candidate. Discuss Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge for optimised machining strategies and dependable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P2841S-6N-E57-WSP45G-WALTER Article designation: P2841S-6N-E57 WSP45G Product type: drilling/bore-widening indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Grade: WSP45G Chipformer: 6N‑E57 Material designation: P / M / S ISO-related designation: P2841S-6N-E57 WSP45G Special features Coating: Tiger·tec Gold (PVD coated hardmetal) Suitable for: Stahl, rostfreier Stahl, heat-resistant superalloys and titanium Application: drilling and bore-widening operations Robust chip control for secure machining FAQ Is this insert suitable for machining stainless materials? Yes. The P2841S-6N-E57 WSP45G is specified for rostfreier Stahl and offers coating and geometry optimised for the associated thermal and adhesion challenges. What material groups does the WSP45G grade cover? The WSP45G grade is formulated for P / M / S groups, covering Stahl, rostfreier Stahl and heat-resistant superalloys/titanium for versatile workshop use. How does the 6N‑E57 chipformer affect machining? The 6N‑E57 chipformer improves chip breaking and evacuation, supporting better surface finish and reducing the likelihood of chip-related interruptions during bore-widening. Can this insert be used for interrupted cuts in drilling operations? Yes. The combination of Tiger·tec Gold coating and the WSP45G grade enhances edge stability, making the insert suitable for many interrupted and continuous drilling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P2841S-6N-E57 WXP40 Wendeplatten - Walter Tools
Benefit from the combination of WXP40 uncoated carbide, the 6N-E57 chipbreaker geometry and Walter Tools' open-series production for consistent chip control and predictable tool life — a practical match for standard drilling and boring applications; order directly via Metav Werkzeuge or consult our technical team for selection support. P2841S-6N-E57 WXP40 – Drilling/boring indexable insert by Walter Tools, uncoated carbide with 6N-E57 chipbreaker P2841S-6N-E57 WXP40 is an indexable insert designed for drilling and bore-enlarging operations where stable chip formation and repeatable edge performance are required Uncoated carbide grade WXP40 6N-E57 chipbreaker geometry Precision ground cutting edges Walter Tools open-series grade Stable chip control for reliable cycle times The insert is engineered to promote consistent chip formation through the 6N-E57 chipbreaker geometry, which reduces vibration and supports uninterrupted evacuation in common drilling and boring setups. This leads to fewer interruptions and more stable cycle times. The uncoated WXP40 grade provides a predictable wear behaviour that helps planners estimate tool change intervals more reliably, improving process planning and reducing unforeseen downtime. Clear guidance on application and compatibility The component is part of an open series from Walter Tools and is intended for general drilling/boring use; specific workpiece material suitability should be checked against the product matrix supplied by the manufacturer. The specification explains machining implications plainly: the insert’s geometry favours controlled chips in conventional metal-cutting conditions, while the uncoated carbide chemistry provides straightforward reconditioning and inspection options for workshop maintenance teams. Practical handling and inspection benefits A precision-ground cutting edge simplifies seating and alignment in the tool holder and supports reproducible results after re-indexing. The design reduces the need for complex cutting-fluid strategies in many cases, enabling straightforward process parameterisation. Inspection routines benefit from the visible wear patterns that uncoated carbide exhibits, allowing maintenance staff to make informed decisions about redeployment or replacement without specialised testing. For tailored advice on matching the P2841S-6N-E57 WXP40 insert to a specific application, and for current stock and delivery details, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss configuration and availability Technical data Article number: P2841S-6N-E57-WXP40-WALTER SKU: P2841S-6N-E57-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P2841S-6N-E57 WXP40 Walter Tools Product type: Drill/boring indexable insert Manufacturer: Walter Tools Grade: WXP40 Chipbreaker: 6N-E57 Series: Walter Schneidstoffsorte - Serie offen Material: Catalog-dependent Core data ISO designation: P2841S-6N-E57 WXP40 Designation without grade: P2841S-6N-E57 UID: P2841S-6N-E57-WXP40-WALTER Special features Uncoated carbide (unbeschichtetes Hartmetall) Open-series Walter grade for broad application checks Intended for drilling and bore enlargement Workpiece material suitability: check product matrix FAQ What chipbreaker does this insert use? The insert features the 6N-E57 chipbreaker geometry; in the P2841S-6N-E57 WXP40 this element is the primary factor for controlled chip formation during drilling and boring operations. Is the WXP40 grade coated or uncoated? The WXP40 grade in the P2841S-6N-E57 WXP40 is described as uncoated carbide, offering predictable wear patterns and straightforward inspection for maintenance teams. Which applications suit this indexable insert? This insert is intended for drilling and bore-enlarging tasks where stable chip control is required; specific suitability for a given workpiece material must be verified against the manufacturer’s product matrix for the Walter Tools open series. How should the cutting-edge condition be assessed? Inspect the cutting edge visually for uniform wear and check the insert seating; the uncoated WXP40 grade shows clear wear signatures that aid decision-making on re-indexing or replacement. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
P2841S-6N-E67 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, Tiger·tec Silver coated carbide, and suitability for both Stahl and Gusseisen to keep machining cycles consistent and productive. Order the P2841S-6N-E67 WKP35S directly via Metav Werkzeuge or ask our consultants if needed. P2841S-6N-E67 WKP35S drilling/boring indexable insert — Tiger·tec Silver by Walter Tools A P2841S-6N-E67 WKP35S indexable insert designed for drilling and boring operations in Stahl and Gusseisen, offering optimised chip control and robust wear resistance. Tiger·tec Silver coated carbide grade WKP35S Optimised chipformer 6N-E67 for reliable chips Designed for Stahl (P) and Gusseisen (K) machining Robust performance for high productivity operations Optimised chip control reduces interruptions and cycle time The insert’s 6N-E67 chipformer is designed to break and evacuate chips reliably during drilling and enlarging operations, which minimises re-cutting and tool downtime. With Tiger·tec Silver surface technology and the WKP35S carbide grade, the geometry and coating work together to influence chip shape and flow; this results in fewer machine stoppages and steadier cutting forces. For production environments where uninterrupted cycles matter, the combination of targeted chip control and consistent edge behaviour supports higher component throughput and predictable process windows. Predictable wear behaviour boosts productivity on mixed materials Manufactured as a coated carbide insert, the grade WKP35S is tailored for the thermal and abrasive conditions encountered when machining Stahl and Gusseisen. The coating stabilises the cutting edge under heat and reduces adhesive wear, while the carbide substrate provides the toughness required for intermittent drilling loads. The result is improved tool life and more consistent surface quality, allowing longer runs between tool changes and fewer unplanned interventions. This makes the insert especially suitable for batch production or mixed-series machining where repeatable performance is essential. Clear selection and application guidance for shop-floor use The indexable insert is intended for drilling and boring tool bodies that accept the P2841S geometry (designation P2841S-6N-E67). When selecting the insert for a specific application, match the chipformer 6N‑E67 to the hole depth and coolant strategy to ensure chip evacuation. The coated carbide nature of the grade means cooling and feed rates should be chosen to balance cutting temperature and mechanical load. For practical setup, align toolholder geometry and clamping to the insert seat specification to achieve the described stability and surface finish benefits from Walter Tools' technology. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to arrange specification support or delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P2841S-6N-E67-WKP35S-WALTER Article name: Bohr-/Aufbohrwendeschneidplatte P2841S-6N-E67 WKP35S Walter Tools Series: Tiger-tec Silver Grade: WKP35S Chipformer: 6N-E67 Material designation: P / K Product type: drilling/boring indexable insert ISO designation: P2841S-6N-E67 WKP35S Manufacturer: Walter Tools Facts SKU: P2841S-6N-E67-WKP35S-WALTER UID: P2841S-6N-E67-WKP35S-WALTER Special features Coated carbide grade WKP35S Optimised chipformer 6N-E67 Suited for Stahl (P) and Gusseisen (K) Series benefits: Tiger·tec Silver coating technology Application: drilling and boring operations Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P2841S-6N-E67 WKP35S insert is suitable for Stahl (group P) and Gusseisen (group K) machining, reflecting the WKP35S grade’s balance of wear resistance and toughness for these materials. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver coating on the WKP35S grade improves thermal stability and reduces adhesive wear, helping the insert maintain edge integrity and extend useful tool life under typical drilling loads. How does the 6N‑E67 chipformer affect performance? The 6N‑E67 chipformer produces controlled, short chips in drilling and boring operations, which improves evacuation and reduces the risk of re-cutting or tool clogging, supporting continuous machining cycles. Is this insert intended for finishing or roughing operations? The insert’s balance of coating and substrate toughness makes it versatile; it can be used in both productive roughing passes and in cuts where stable surface quality is required, depending on cutting parameters and holder geometry. Which toolholders or systems accept the P2841S designation? Use the P2841S-6N-E67 cutting geometry in toolholders and drilling systems designed for the P2841S insert form; correct seating and clamping are essential to achieve the advertised stability and chip control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
P2841S-6N-E67 WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the tough WSP45G grade for reproducible machining of steel, stainless steel and heat‑resistant alloys; the insert delivers consistent chip control and extended edge life for drilling and reaming operations. Order directly via Metav Werkzeuge or request application advice from our consultants. P2841S-6N-E67 WSP45G indexable drill/ream insert — Tiger·tec Gold, chipbreaker 6N‑E67 by Walter Tools The P2841S-6N-E67 WSP45G is an indexable insert designed for drilling and reaming applications, optimised to handle steel, stainless steel and high‑temperature superalloys with reliable edge stability. Tiger·tec Gold PVD‑coated grade WSP45G Stable edge for high‑temperature alloys Suitable for steel, stainless steel and superalloys Consistent chip formation and extended tool life Increased process security through a robust coated grade The combination of Tiger·tec Gold technology and the WSP45G grade provides a PVD‑coated carbide surface engineered for wear resistance and thermal stability. This composition reduces flank wear and supports a predictable cutting edge over longer cycles, which directly improves machining uptime. For operations on steels and stainless steels the heat‑resistant coating mitigates adhesive wear and helps avoid built‑up edge; for difficult‑to‑machine superalloys the enhanced edge stability reduces the risk of catastrophic tool failure. The result is measurable process security and fewer unexpected tool changes. Better chip control for safer, faster holes The 6N‑E67 chipbreaker geometry is designed to produce short, controllable chips across a wide range of materials. By promoting stable chip formation, the insert minimises chip entanglement and reduces surface damage to the bore wall, improving repeatability and surface finish. In practical terms, this means shorter cycle times, less manual intervention and improved component quality when drilling and reaming difficult alloys. The chipbreaker also lowers cutting forces during interrupted cuts, supporting more aggressive feed rates where the machine and setup allow. Integration benefits and economical tooling strategy As an indexable drill/ream insert from Walter Tools, the design fits standard indexable drill holders, enabling straightforward retrofitting in existing tool inventories. The coated carbide grade and chip management reduce tool consumption per part, which improves cost per hole and simplifies regrind or replacement planning. For production shops that run mixed materials, the multi‑material suitability (steel, stainless steel, superalloys) reduces inventory complexity and supports a leaner tooling strategy while maintaining surface quality and dimensional consistency. Contact Metav Werkzeuge for tailored application support on the Tiger·tec Gold WSP45G insert and to discuss compatible toolholders and delivery options; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: P2841S-6N-E67-WSP45G-WALTER Designation: P2841S-6N-E67 Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 6N‑E67 Product type: Indexable drill/ream insert Material suitability: P / M / S Manufacturer: Walter Tools UID: P2841S-6N-E67-WSP45G-WALTER Facts Multi‑material capability: steel, stainless steel, superalloys Coating: PVD (Tiger·tec Gold) Carbide base: coated hard carbide Typical applications: drilling, reaming, holemaking Special features Optimised chip control geometry Enhanced thermal and wear resistance Designed for repeatable edge stability Compatible with standard indexable drill holders FAQ What materials can this insert machine effectively? The P2841S‑6N‑E67 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys, thanks to the Tiger·tec Gold PVD coating and the WSP45G grade. How does the 6N‑E67 chipbreaker improve holemaking? The 6N‑E67 chipbreaker promotes short, consistent chips that reduce entanglement and surface damage, resulting in improved bore finish and more stable production when using the Walter Tools indexable insert. Can the insert be used in existing toolholders? Yes, the insert is designed to integrate with standard indexable drill holders, allowing retrofit into many existing tool systems to simplify tooling logistics. What are the main advantages of the Tiger·tec Gold coating? Tiger·tec Gold provides a hard, thermally stable PVD surface that increases wear resistance and edge life, supporting higher productivity and more predictable tool life on demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
P2841S-6N-E67 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of durable uncoated carbide, precise 6N‑E67 chip control, and a design optimised for efficient drilling and boring operations to maintain a stable production flow; order directly via Metav Werkzeuge or request application advice from our consultants. P2841S-6N-E67 WXP40 Drill/Boring Indexable Insert — 6N‑E67 chipbreaker, Walter Tools P2841S-6N-E67 WXP40 is a drill/boring indexable insert designed for general drilling and boring tasks in workshop and production environments. Uncoated carbide grade WXP40 Optimised 6N‑E67 chipbreaker Robust for production drilling Part of Walter open grade series Reliable material performance for mixed-component machining The P2841S-6N-E67 WXP40 insert is manufactured from uncoated carbide, a material choice that favours predictable wear behaviour and stable cutting edges under a range of cutting conditions. This indexable insert concept enables rapid seat changes in toolholders, reducing downtime and simplifying tool management. The open-series WXP40 classification indicates a general-purpose grade; end-users should verify the specific workpiece matrix in their application to confirm optimal suitability. The factual basis of the insert’s composition supports straightforward planning of tool life and replacement intervals. Controlled chips and improved operational consistency Equipped with the 6N‑E67 chipbreaker, the insert provides consistent chip formation during drilling and boring cycles, which reduces the risk of chip entanglement and tool damage. Improved chip control contributes directly to higher process reliability and fewer interruptions on the shop floor, translating into measurable uptime improvements. For production operations where cycle time and repeatability matter, this chip geometry helps maintain steady surface quality and dimensional stability throughout long runs. Economic throughput and machining advantages By combining a general-purpose uncoated carbide grade with a designed chipbreaker, this insert supports efficient metal removal while keeping tooling costs manageable. The ability to replace only the insert rather than the entire tool body reduces consumable expenditure and inventory complexity. In practice, adopting such an insert can deliver a favourable cost-to-performance ratio when applied within its recommended material range and machining parameters, enhancing overall shop productivity. Practical compatibility and ordering information The insert is listed under the designation P2841S-6N-E67 WXP40 and fits standard holders designed for this family of inserts. Since the material specification is catalogue-dependent, confirm the exact substrate and grade details against the product listing when specifying replacements or planning trials. For bespoke applications or uncertainty about workpiece compatibility, consultancy with Metav Werkzeuge ensures correct selection of grade and geometry for the intended drilling or boring task. Contact Metav Werkzeuge for precise application advice on Walter Tools P2841S-6N-E67 WXP40, request a datasheet or discuss toolholder compatibility via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P2841S-6N-E67-WXP40-WALTER SKU: P2841S-6N-E67-WXP40-WALTER Product type: Drill/boring indexable insert Designation: P2841S-6N-E67 WXP40 Facts No core numerical data provided Special features Grade: WXP40 (uncoated carbide) Chipbreaker: 6N‑E67 Series: Walter Schneidstoffsorte - Serie offen Material specification: catalogue-dependent Manufacturer: Walter Tools Label: Bohr-/Aufbohrwendeschneidplatte P2841S-6N-E67 WXP40 Walter Tools UID: P2841S-6N-E67-WXP40-WALTER FAQ Is this insert suitable for stainless steel machining? Compatibility with stainless steel depends on the specific workpiece and cutting parameters; the P2841S-6N-E67 WXP40 is an uncoated carbide grade and suitability should be verified in the product matrix for stainless steel applications. What advantage does the 6N‑E67 chipbreaker provide? The 6N‑E67 chipbreaker improves chip control during drilling and boring, reducing the likelihood of chip build-up and contributing to consistent surface finish and process reliability for the insert. Can the grade WXP40 be used for high-speed machining? WXP40 is a general-purpose, uncoated carbide grade; for assured high-speed performance, check the catalogue-dependent material specification and machining recommendations before implementation. How is the insert identified for replacement orders? Order using the designation P2841S-6N-E67 WXP40 or the SKU P2841S-6N-E67-WXP40-WALTER to ensure the correct chipbreaker and grade are supplied. Will this insert fit existing drill holders? The insert fits holders designed for the P2841S insert family; confirm holder compatibility and seating specifications against the toolholder documentation prior to fitting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter Tools brand is mentioned for identification purposes only. Protected trademarks and trade names remain the property of their respective owners. There is no affiliation between our company and the named brands. The offered item is original factory-new merchandise of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com