P3204-D15.87 WSP46G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating, versatile material compatibility (Stahl, rostfreier Stahl and superalloys) and a precise D15.87 chipbreaker for predictable chip control — order the insert directly via Metav Werkzeuge or consult the technical team for process support. P3204-D15.87 WSP46G – milling indexable insert, Tiger‑tec Gold, D15.87 chipbreaker (Walter Tools) The P3204-D15.87 WSP46G is a coated carbide milling indexable insert engineered for versatile milling applications, delivering wear resistance and reliable chip formation across steel, rostfreier Stahl and heat‑resistant alloys. Tiger‑tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and S materials D15.87 chipbreaker for stable chips Boosted productivity with a wear‑resistant coating The combination of the Tiger‑tec Gold PVD coating and a coated carbide substrate provides a measurable increase in tool life under varied cutting conditions. This cutting grade is formulated to balance toughness and thermal resistance, which reduces flank wear and delays crater formation during interrupted or continuous milling. For production environments where tool change intervals affect throughput, the improved wear behaviour translates to fewer interventions and steadier output; the consequence is a more consistent process window and reduced scrap rates. The engineering behind the coating supports higher sustained cutting speeds while preserving edge integrity. Reliable chip control and consistent surface quality A well‑designed chipbreaker is central to process stability. The D15.87 chipbreaker produces short, controllable chips in a broad range of feeds and depths of cut, limiting entanglement and heat concentration at the cutting edge. Stable chip formation reduces the risk of built‑up edge on the rake face and supports repeatable surface finish from pass to pass. In practice, this means less rework and more predictable cycle times for both semi‑finished and finishing operations. The insert’s geometry also helps to maintain a stable cutting edge, which benefits downstream inspection and assembly stages. Versatile use across common and demanding alloys Designed as a tough and versatile PVD grade, the WSP46G sort is particularly suited to milling tasks in steel, rostfreier Stahl and high‑temperature alloys such as nickel‑based superalloys and titanium where appropriate. The grade’s balance of adhesion resistance and edge toughness makes it a strong candidate for mixed‑material production batches and for shops aiming to reduce tool inventories without sacrificing performance. For machinists requiring clear guidance, the grade supports a wide range of milling operations and is compatible with standard tool holders for indexed inserts, enabling straightforward integration into existing tool systems. For tailored machining advice or to purchase the Tiger‑tec Gold WSP46G insert, contact Metav Werkzeuge for technical consultancy and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P3204-D15.87-WSP46G-WALTER Product: milling indexable insert Grade: WSP46G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Geometry code: P3204-D15.87 Chipbreaker: D15.87 Material compatibility code: P / M / S Special features Coating: Tiger‑tec Gold (PVD) Substrate: coated carbide Suitable for: Stahl, rostfreier Stahl, superalloys and titanium Application focus: milling operations, versatile use FAQ Is this insert suitable for stainless steels? The P3204-D15.87 WSP46G insert is designed for rostfreier Stahl and provides stable chip control and edge life when properly applied. What is the main benefit of the Tiger‑tec Gold coating? Tiger‑tec Gold on the WSP46G grade improves wear resistance and thermal stability for longer, more predictable tool life in demanding milling tasks. Which chip behaviour can be expected with the D15.87 chipbreaker? The D15.87 chipbreaker promotes short, controllable chips, helping to avoid entanglement and supporting consistent surface finish during milling. Can the insert be used for mixed‑material production runs? Yes; the toughness and versatility of the WSP46G grade make it suitable for mixed runs involving Stahl, rostfreier Stahl and heat‑resistant alloys, allowing reduced tool inventory and flexible scheduling. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are used here solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
P3204-D16 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of WHH15X coated-carbide performance and the D16 chipbreaker for predictable chip control and stable milling, which supports efficient production. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific selection. P3204-D16 WHH15X – Milling indexable insert by Walter Tools (coated carbide, chipbreaker D16) The P3204-D16 WHH15X is a milling indexable insert engineered for general milling tasks where consistent chip formation and tool life are priorities. Coated carbide grade WHH15X D16 chipbreaker for consistent chip control Designed for a wide range of milling applications Walter open-series grade for flexible selection Predictable chip control for smoother machining The combination of a dedicated chipbreaker D16 and a coated carbide substrate produces consistently shaped chips, reducing rework and downtime. The chipbreaker geometry actively guides chip flow away from the cutting zone, which lessens the risk of recutting and improves surface finish in intermittent and continuous milling. For operations aiming to reduce cycle variance, this insert supports stable material removal rates and repeatable performance. Flexible series design for application-oriented selection Belonging to the Walter open series, the insert offers adaptability across multiple toolholder systems and cutting conditions. The insert’s grade is specified as WHH15X, a coated carbide class; suitability for particular workpiece materials should be verified against the manufacturer’s product matrix. Where the matrix indicates compatibility, the insert can contribute to higher productivity through extended edge life and reliable cutting action. Easy integration and predictable life cycle management As an indexable solution, the insert supports quick replacement and consistent reproducibility of cutting edges, simplifying tool inventory and maintenance planning. The design reduces machine downtime during insert changes and assists in achieving uniform component tolerances across batches. For planners and production engineers, the insert’s repeatability and the clear designation of chipbreaker and grade aid process standardisation and quality control. For application advice or catalogue details about the WHH15X grade and D16 chipbreaker, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific materials and machining conditions Technical Data SKU: P3204-D16-WHH15X-WALTER Designation: P3204-D16 WHH15X Product type: Milling indexable insert Manufacturer: Walter Tools Core data Grade: WHH15X Chipbreaker: D16 Carbide class: coated carbide Special features Series: Walter Schneidstoffsorte - Serie offen Material specification: catalogue-dependent Application: milling indexable insert Recommendation: verify workpiece compatibility via product matrix FAQ What materials is the P3204-D16 WHH15X suitable for? Material compatibility depends on the product matrix; the P3204-D16 WHH15X is a coated carbide grade and its suitability should be checked in the Walter Tools matrix for the intended workpiece. How does the D16 chipbreaker affect machining? The D16 chipbreaker on the P3204-D16 WHH15X promotes controlled chip formation and evacuation, improving surface quality and lowering the likelihood of recutting. Can this insert be used in standard milling toolholders? The P3204-D16 WHH15X is an indexable milling insert designed for integration into common milling toolholder systems; confirm seat and clamping compatibility before assembly. Is the WHH15X grade abrasive- or wear-focused? WHH15X is specified as a coated carbide grade; detailed wear behaviour and recommended cutting parameters are provided in Walter Tools documentation and should be consulted for process optimisation. Where can additional technical data for SKU P3204-D16-WHH15X-WALTER be found? Further specifications, recommended cutting data and the full product matrix are available from Walter Tools literature or via Metav Werkzeuge for application-specific guidance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory-new product of the named manufacturer (Walter Tools).
P3204-D16 WKP25 Wendeplatten - Walter Tools
Benefit from reliable cutting performance, broad suitability for steel and cast iron, and a coated carbide grade engineered for steady tool life — order the insert directly via Metav Werkzeuge or consult our specialists for machining advice. P3204-D16 WKP25 milling indexable insert by Walter Tools — coated carbide for steel and cast iron The P3204-D16 WKP25 is a milling indexable insert designed for productive face and profile milling where consistent chip control and wear resistance are required. Coated carbide grade WKP25 Optimised D16 chipbreaker Suitable for steel and cast iron Stable cutting edge for consistent tool life Consistent productivity for steel and cast iron machining The insert is based on a coated carbide grade developed for machining group P (steel) and group K (cast iron) according to ISO 513. This composition balances hardness and toughness to resist the typical heat and abrasion of steel cutting while remaining effective against the short, brittle chips encountered with cast iron. The result is a reduction in unexpected tool changeovers and a smoother production flow. For users less familiar with insert metallurgy: a coated carbide offers a hard outer layer to reduce abrasive wear and a tough substrate to withstand impact, which together extend usable tool life. Reliable chip control that reduces rework and downtime Equipped with the D16 chipbreaker, the geometry is tuned to produce predictable chip forms across a range of feeds and depths of cut. Controlled chips clear the cutting zone more readily, lowering the risk of built-up edge and surface defects. In practical terms, this means fewer interruptions for chip removal and less need for manual intervention, supporting higher uptime on milling centres. The insert’s geometry also helps maintain dimensional stability of the workpiece, improving first-pass yield. Designed for reproducible performance and simple tool management The WKP25 grade belongs to an open series of Walter cutting materials aimed at broad coverage and straightforward sort assignment. The insert offers a dependable cutting edge that supports repeatable results part-to-part, which benefits batch production and mixed-series manufacturing alike. Using standard indexable insert handling and toolholders keeps changeovers rapid; the coated surface also helps maintain surface finish quality over longer tool life, meaning fewer regrinds or replacements and improved process economy. For machining guidance and to discuss application-specific recommendations for Walter Tools inserts, contact Metav Werkzeuge — our technical team can advise on optimal cutting parameters and holder selection Technical Data Article number: P3204-D16-WKP25-WALTER SKU: P3204-D16-WKP25-WALTER Product type: milling indexable insert Designation: P3204-D16 WKP25 Manufacturer: Walter Tools Facts Chipbreaker: D16 Grade: WKP25 (coated carbide) Series: Walter cutting material series — open Material suitability: P (steel), K (cast iron) Special features Coated carbide construction Optimised chip control geometry Stable cutting edge for reproducible results Suitable for face and profile milling operations FAQ What materials can be machined with this insert? The P3204-D16 WKP25 insert is suitable for steel (ISO group P) and cast iron (ISO group K), making it a versatile choice for mixed workshops. How does the D16 chipbreaker benefit milling operations? The D16 chipbreaker promotes controlled chip formation and evacuation, which improves surface quality and reduces the need for manual chip clearing during runs. Is WKP25 a coated or uncoated grade? WKP25 is a coated carbide grade developed to combine wear resistance with toughness for reliable cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D16 WSM36G WSM36G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM36G grade for superior edge stability and consistent chip control in demanding materials; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. P3204-D16 WSM36G milling insert – Tiger·tec Gold, Walter Tools The P3204-D16 WSM36G is a coated indexable milling insert engineered for heavy-duty machining of stainless steel and high-temperature alloys, offering stable cutting edges and controlled chip formation. Tiger·tec Gold coating for heat resistance Optimised D16 chipbreaker for reliable chips WSM36G grade for tough material performance Consistent edge life in demanding alloys Longer productive runs through improved edge stability The coated carbide grade WSM36G in the Tiger·tec Gold series combines heat resistance and wear control to maintain a sharp cutting edge for longer cycles. This characteristic reduces interruptions for insert changes and minimises unplanned downtime, delivering measurable improvements in machine utilisation and process stability. The combination of a thermally robust coating and a substrate tuned for toughness supports repeatable performance when machining stainless steel and similar difficult-to-cut materials. Predictable chip control that lowers rework rates With the D16 chipbreaker geometry, chip form is directed away from the cutting zone to prevent entanglement and tool interference. Stable chip evacuation reduces surface defects and cutting forces, which in turn lowers the risk of rework and scrap. For production environments where consistency is crucial, the insert’s geometry translates into fewer quality deviations and a more efficient downstream process. Easy specification and integration into production tooling The insert is supplied in the familiar P3204-D16 format, simplifying selection for existing toolholders and reducing setup time. The grade’s suitability for material groups S and M (heat-resistant superalloys, titanium and stainless steel) allows one type of insert to cover several critical applications, streamlining inventory. Technical teams benefit from a straightforward material-to-grade mapping that supports fast decision-making on shop-floor tooling choices. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific stainless steel operations and to order the P3204-D16 WSM36G insert directly from stock Technical Data Article number: P3204-D16-WSM36G-WALTER SKU/UID: P3204-D16-WSM36G-WALTER Name: Fräswendeschneidplatte P3204-D16 WSM36G Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Data Grade: WSM36G Series: Tiger·tec Gold Chipbreaker: D16 Material groups: S / M Special features Coated carbide (Tiger·tec Gold) Suitable for stainless steel and heat-resistant alloys Designed for stable chip formation and edge stability Walter Tools brand FAQ What materials is this insert designed for? The P3204-D16 WSM36G insert is intended primarily for stainless steel and heat‑resistant superalloys (material groups M and S), offering a balance of thermal resistance and edge stability. What does the WSM36G designation indicate? WSM36G denotes Walter Tools’ coated carbide grade optimised for heavy machining of tough alloys; the grade is part of the Tiger·tec Gold coating technology. Which chipbreaker is fitted and what benefit does it bring? The insert features the D16 chipbreaker, which produces controlled chips to improve evacuation and reduce the likelihood of surface damage and tool interference. Is the insert compatible with standard P3204 toolholders? Yes, the P3204-D16 format matches common toolholder interfaces for this insert family, facilitating quick integration into existing tool systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
P3204-D16 WSP46G WSP46G Wendeplatten - Walter Tools
Take advantage of the proven combination of a Tiger·tec Gold PVD-coated carbide grade and a dedicated D16 chipbreaker for stable chip control and longer tool life; this results in more productive milling cycles and predictable process security. Order the Fräswendeschneidplatte P3204-D16 WSP46G directly via Metav Werkzeuge or ask our consultants if needed. Fräswendeschneidplatte P3204-D16 WSP46G – Tiger·tec Gold PVD-coated milling insert by Walter Tools P3204-D16 WSP46G is a PVD-coated carbide milling insert designed for versatile milling tasks across a wide range of workpiece materials, optimised for stable cutting and reliable chip formation. Tiger·tec Gold coating for extended tool life WSP46G PVD-coated carbide for stable cutting D16 chipbreaker for reliable chip control Applicable to steel, stainless and superalloys Higher productivity through stable cutting performance The Tiger·tec Gold series and the WSP46G grade combine a tough, PVD-coated carbide substrate with a geometry tailored for milling. This composition promotes edge stability under the elevated temperatures typical of machining steel and stainless steel, and supports controlled cutting when tackling heat-resistant alloys. The integrated D16 chipbreaker enables consistent chip formation, reducing the risk of entanglement and improving cycle reliability. For manufacturing operations seeking fewer tool changes and more consistent output, these characteristics translate directly into measurable productivity gains. Consistent surface finish and predictable tool life A wear-resistant PVD coating and the specific grade properties of WSP46G reduce built-up edge and maintain a sharper cutting edge for longer intervals. The result is a consistent surface finish across batches and lower scrap rates in serial production. The grade’s design for typical steel and stainless steel behaviours means predictable flank wear progression and improved process security. In practice, this contributes to lower rework and steadier production runs, which is particularly valuable when repeatability and part quality are priorities. Engineered for versatile milling applications Built principally for milling applications, this insert’s material compatibility covers the ISO groups P, M and S, making it suitable for unalloyed and alloyed steel, rostfrei (stainless steel) and high-temperature superalloys/titanium families where toughness and heat resistance are needed. The insert’s combination of geometry and coating supports both roughing and semi-finishing strategies where stable edges and controlled chips are required. For process planners, the grade provides a flexible choice that can reduce tooling complexity across varied component families. Contact Metav Werkzeuge for tailored application support and request the Walter Tools P3204-D16 WSP46G milling insert to improve process reliability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P3204-D16-WSP46G-WALTER Article name: Fräswendeschneidplatte P3204-D16 WSP46G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP46G Chipbreaker: D16 Applicable materials: P / M / S Core Data SKU: P3204-D16-WSP46G-WALTER ISO designation: P3204-D16 WSP46G Material group compatibility: P, M, S Special features PVD-coated carbide grade Tough, versatile composition optimised for milling Designed for stable chip control and edge retention Suited to steel, stainless steel and heat-resistant alloys FAQ What materials can this milling insert machine effectively? The Walter Tools Fräswendeschneidplatte P3204-D16 WSP46G is suitable for ISO groups P, M and S, covering steel, stainless steel and heat-resistant superalloys/titanium. What does the Tiger·tec Gold designation mean for performance? Tiger·tec Gold denotes a PVD-coated carbide technology that enhances wear resistance and heat tolerance, helping the WSP46G grade deliver longer tool life and stable cutting behaviour. How does the D16 chipbreaker influence machining? The D16 chipbreaker on this insert promotes reliable chip formation and evacuation, which supports continuous milling operations and reduces risks of chip re-cutting or entanglement. Is the WSP46G grade suitable for finishing stainless steels? Yes, the WSP46G grade is designed to handle the typical challenges of stainless steels—toughness and tendency for built-up edge—thus aiding consistent surface finishes during finishing passes. Can this insert be used for titanium or nickel-based alloys? The insert is compatible with ISO group S materials, meaning it is engineered to manage the heat and stress associated with titanium and certain superalloys, offering stable edge life under demanding conditions. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned manufacturers. The offered item is an original, brand-new factory product of the manufacturer.
P3204-D19.05 WHH15X Wendeplatten - Walter Tools
Efficient chip control via the D19.05 chipbreaker combined with the WHH15X coated carbide grade supports stable cutting performance and predictable tool life; order the (P3204-D19.05 WHH15X milling insert) directly via (Metav Werkzeuge) or ask our consultants if needed. P3204-D19.05 WHH15X milling insert – coated carbide, D19.05 chipbreaker | Walter Tools The P3204-D19.05 WHH15X is a coated carbide milling insert intended for general milling applications where consistent chip formation and dependable wear resistance are priorities; suitability for specific workpiece materials should be verified against the product matrix. Coated carbide WHH15X for reliable edge life D19.05 chipbreaker for controlled chip formation P3204-D19.05 geometry for versatile milling tasks Consistent chip control that reduces interruptions The integrated D19.05 chipbreaker is designed to improve chip control, separating and evacuating chips evenly during milling. Better chip handling decreases the risk of recutting, shortens machine downtime and reduces the need for manual chip clearing. For production environments where cycle-time consistency matters, the improved chip behaviour contributes directly to higher throughput and fewer quality deviations. Predictable wear life from a coated carbide grade The WHH15X designation refers to a coated carbide grade engineered for balanced performance across a range of applications. The coating enhances wear resistance and helps maintain a stable cutting edge under varied cutting conditions. This predictable performance supports process planning and tool-change intervals, so maintenance schedules can be set with greater confidence and tool costs can be managed more effectively. Practical integration and material guidance for planners The insert’s P3204-D19.05 geometry makes it compatible with holders and tool systems designed for this indexable format; mechanical compatibility should be confirmed with tool-holding specifications. Material compatibility is not declared in the basic data set, so the workpiece suitability must be checked against the manufacturer's product matrix before series use. When matched correctly, the combination of geometry, chipbreaker and coated grade delivers lower rework rates and more stable surface finishes in standard milling operations. Contact Metav Werkzeuge for availability, batch recommendations and application advice on Walter Tools milling inserts Technical data Article number: P3204-D19.05-WHH15X-WALTER Designation: P3204-D19.05 WHH15X Type: milling insert Manufacturer: Walter Tools Material: Katalogabhängig Facts Chipbreaker: D19.05 Grade: WHH15X Series: Walter Schneidstoffsorte - Serie offen UID: P3204-D19.05-WHH15X-WALTER Special features Coated carbide (beschichtetes Hartmetall) Optimised chip formation via D19.05 chipbreaker Designed for stable cutting edge and predictable tool life Workpiece suitability: check product matrix prior to application FAQ Which materials can this insert be used for? Material suitability is not fully specified in the basic data; the P3204-D19.05 WHH15X insert requires verification against the Walter Tools product matrix to determine compatibility with specific workpiece materials. What does the WHH15X grade indicate? WHH15X is a Walter Tools coated carbide grade; it combines a wear-resistant substrate with a coating to improve edge life and performance stability under typical milling conditions. How does the D19.05 chipbreaker benefit production? The D19.05 chipbreaker promotes controlled chip formation and evacuation, reducing recutting and machine interruptions, which supports more consistent cycle times and surface quality. Is the geometry compatible with standard toolholders? The P3204-D19.05 geometry is intended for holders that accept P3204-style inserts; compatibility should be confirmed with the specific tool-holder specifications used in the machining setup. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D19.05 WSM36G WSM36G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM36G grade for secure chip formation and high edge stability when machining demanding materials; order directly via Metav Werkzeuge or request advice from our consultants for an application‑specific recommendation. P3204‑D19.05 WSM36G milling indexable insert – Tiger·tec Gold, D19.05 chipbreaker (Walter Tools) A P3204‑D19.05 WSM36G milling indexable insert designed for heavy machining of stainless steel and heat‑resistant superalloys, combining a coated carbide grade with a dedicated chipbreaker for stable, predictable removal Tiger·tec Gold coating for heat resistance WSM36G grade for stainless steel and superalloys D19.05 chipbreaker for stable chip control Form P3204 for versatile milling applications High thermal stability for tough workpiece materials The coated carbide grade WSM36G, part of the Tiger·tec Gold family, is developed for machining demanding materials such as stainless steel and heat‑resistant superalloys. The coating increases thermal resistance and reduces adhesion, which in turn supports a stable cutting edge and prolonged tool life. For processes where heat buildup and built‑up edge are common, this grade helps maintain consistent performance and reduces the need for frequent index changes, yielding measurable productivity gains. Controlled chip formation to protect the process and workpiece Equipped with the D19.05 chipbreaker and the P3204 form geometry, the insert ensures predictable chip shapes and improved evacuation in interrupted and continuous cuts. The dedicated chip control reduces the likelihood of rework, minimizes machine stoppages and supports higher feed rates where appropriate. In practice, better chip management leads to fewer edge failures and a more reliable cycle time, which benefits both short runs and series production. Efficient use and easy integration into machining lines This milling insert is supplied in the P3204 format and integrates directly into common toolholders for finishing and roughing strategies when the geometry allows. The combination of the WSM36G grade and the chipbreaker provides a balance between wear resistance and toughness, suited to operations that demand process security and repeatability. For shops aiming to raise throughput while keeping quality steady, the insert offers a practical route to improved machining stability with minimal process adjustment. Suitable applications and practical recommendations Ideal applications include components made from stainless steel and high‑temperature alloys where edge breakdown is a frequent challenge. The coated carbide composition supports higher cutting temperatures and helps avoid built‑up edge on sticky materials. For optimal performance, pair the insert with compatible toolholder geometry and adjust feeds to the workpiece batch size and rigidity of the set‑up; a modest increase in feed with the correct chipbreaker often yields better material removal rates without compromising surface finish. For tailored advice on applying the Tiger·tec Gold WSM36G grade to specific stainless steel components, contact Metav Werkzeuge for technical support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P3204-D19.05-WSM36G-WALTER Article: P3204-D19.05 WSM36G Brand: Walter Tools Series: Tiger·tec Gold Core data Grade: WSM36G Chipbreaker: D19.05 Form: P3204 Material groups supported: S / M Features & compatibility Coated carbide (beschichtetes Hartmetall) Designed for stainless steel and heat‑resistant superalloys Focus on stable chip formation and edge stability Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The WSM36G grade is formulated for machining stainless steel and heat‑resistant superalloys; the Tiger·tec Gold coating improves performance where heat and adhesion are critical. How does the D19.05 chipbreaker influence machining? The D19.05 chipbreaker promotes controlled chip formation, improving evacuation and reducing edge stress, which benefits both surface quality and tool life when using this milling indexable insert. Can the insert be used for both roughing and finishing? Depending on the holder and cutting parameters, the P3204 form with WSM36G can be employed in a range of operations from heavy roughing to semi‑finishing, prioritising process security and repeatable results. What is the primary advantage of the Tiger·tec Gold coating on this grade? Tiger·tec Gold coating enhances thermal resistance and reduces built‑up edge, enabling higher cutting temperatures with less adhesive wear on the coated carbide grade. Is this insert compatible with standard Walter Tools holders? Yes, the insert form P3204 and the ISO designation match common Walter Tools toolholder systems designed for these indexable plates. Walter Tools, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D19.05 WSP46G WSP46G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSP46G grade and the D19.05 chipbreaker for reliable, versatile milling of steel, stainless steel and high‑temperature alloys; order directly via Metav Werkzeuge or consult our specialists for process optimisation. P3204-D19.05 WSP46G indexable milling insert — Tiger·tec Gold, D19.05 chipbreaker (Walter Tools) The P3204-D19.05 WSP46G is a Tiger·tec Gold coated indexable milling insert engineered for versatile face and peripheral milling of steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold PVD coating WSP46G grade for edge stability D19.05 chipbreaker for controlled chip formation Suitable for steel, stainless steel and titanium Higher throughput through stable cutting performance The combination of the WSP46G grade and Tiger·tec Gold coating delivers a balance between toughness and wear resistance that supports higher feed rates and longer tool life. The insert is designed to maintain a stable cutting edge under the thermal and mechanical stresses typical of milling steel and stainless steel, which reduces unexpected tool changes and keeps production running. The result is measurable improvement in cycle consistency and less time spent on tool handling and replacement. Broad material compatibility reduces tool inventory Configured for the ISO groups P / M / S, this insert covers a wide spectrum of components from unalloyed and alloyed steel through to stainless steel and heat‑resistant superalloys or titanium. The substrate and coating selection make the grade tolerant to the different chip formation behaviours and thermal loads of these materials, enabling fewer tool variations across mixed production lots while preserving surface quality and dimensional control. Coating and chip control that extend service intervals The Tiger·tec Gold PVD system combined with the D19.05 chipbreaker promotes controlled chip formation and thermal resilience during interrupted and continuous milling. Controlled chips improve process reliability in slotting and shoulder milling, while the coating reduces abrasive wear on the cutting edge. This technical pairing supports consistent surface finish and prolongs the interval between regrinds or insert changes, contributing to a lower total cost of machining in high‑volume or batch operations. Practical application and process guidance for secure integration As an indexable milling insert intended for a wide range of tasks, the component is suitable for both roughing and semi‑finishing when paired with the correct cutter body and cutting data. The insert’s design focuses on predictable behaviour under load, making it straightforward to adopt in standard machining routines. For tailored recommendations on holder selection, feeds and speeds for specific alloys or geometries, Metav Werkzeuge’s technical consultants can advise on optimised process parameters. Contact Metav Werkzeuge for tailored recommendations and ordering assistance for Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P3204-D19.05-WSP46G-WALTER SKU: P3204-D19.05-WSP46G-WALTER Label: Milling insert P3204-D19.05 WSP46G Walter Tools Facts Chipbreaker designation: D19.05 Grade: WSP46G Series: Tiger·tec Gold Material compatibility code: P / M / S Special features PVD‑coated cemented carbide grade Tough, versatile grade for milling applications Designed for stable chip formation Targeted for steel, stainless steel and heat‑resistant alloys FAQ Which materials can be machined with this insert? The P3204-D19.05 WSP46G insert is suitable for machining steel, stainless steel and high‑temperature alloys (ISO groups P / M / S) as indicated by the WSP46G grade. What is the role of the D19.05 chipbreaker? The D19.05 chipbreaker on the insert controls chip formation to support safe evacuation and consistent surface finishes during face and peripheral milling. How does the Tiger·tec Gold coating benefit tool life? Tiger·tec Gold coating on the WSP46G grade enhances wear resistance and thermal stability, which together help to extend insert life under demanding milling conditions. For which milling tasks is this insert intended? This indexable milling insert is engineered for a range of operations from general roughing to semi‑finishing, depending on cutter setup and cutting data. Is the WSP46G grade suitable for interrupted cuts? Yes, the WSP46G grade is designed with toughness to withstand the impact and thermal cycles typical of interrupted milling in steels and stainless steel. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D20 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of the WHH15X coated carbide grade and the D20 chipbreaker to ensure consistent chip control and productive milling results; order directly via Metav Werkzeuge or consult our specialists for application advice. P3204-D20 WHH15X — milling indexable insert, coated carbide, D20 chipbreaker (Walter Tools) The P3204-D20 WHH15X is a coated carbide milling indexable insert crafted for general milling applications where reproducible chip control and robust cutting performance are required. Coated carbide grade WHH15X D20 chipbreaker for controlled chips Engineered for productive milling operations Precision chip control for higher productivity The combination of the WHH15X cutting grade and the D20 chipbreaker provides reliable, repeatable chip formation that helps maintain stable cutting conditions through a range of interrupted and continuous milling tasks. This tailored chip control reduces the need for frequent process adjustments, resulting in measurable gains in cycle time and a more consistent surface quality. The insert’s geometry is optimised to channel chips away from the cutting zone, which supports uninterrupted machining and lowers the risk of rework. Coated carbide for dependable tool life A coated carbide composition forms the core of this insert’s capability: the applied coating enhances wear resistance and contributes to a consistent edge life under industrial machining regimes. The coated carbide construction is especially beneficial when machining a variety of materials; however, the final suitability should be confirmed via the product matrix for specific workpiece materials. The result is a balance between performance and lifetime that supports predictable production planning and reduces tooling-related downtime. Practical integration into existing tool systems Designed as a standard indexable insert format, this component fits common milling toolholders and pocket geometries, enabling straightforward integration into existing setups. The ISO designation and the P3204 family characteristics simplify tool selection and stocking: the designation indicates the insert geometry while the WHH15X marking identifies the cutting material. This clarity supports inventory management and helps maintain consistent machining parameters across tool changes. Application guidance and selection rationale Material compatibility and cutting parameters should be verified against the manufacturer’s product matrix; the WHH15X grade is a coated carbide intended for broad applicability, but optimal cutting data depends on the specific workpiece material and machine conditions. Where cutting-edge stability and chip control are priorities, this insert’s D20 chipbreaker typically delivers improved swarf evacuation and reduced recutting of chips, supporting both productivity and component finish. For milling applications that prioritise reliable chip control and predictable cutting performance, contact Metav Werkzeuge for tailored recommendations on integrating the Walter Tools P3204-D20 WHH15X into production — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P3204-D20-WHH15X-WALTER Article designation: Fräswendeschneidplatte P3204-D20 WHH15X Walter Tools Product type: Milling indexable insert Series: Walter Schneidstoffsorte - Serie offen Grade: WHH15X Chipbreaker: D20 Material: Katalogabhängig ISO designation: P3204-D20 WHH15X UID: P3204-D20-WHH15X-WALTER Core data No numerical specifications provided in the dataset Special features Coated carbide cutting grade Open series for flexible selection Optimised chip control geometry (D20) Standardised indexable insert format for easy holder compatibility Manufacturer: Walter Tools FAQ What materials can be machined with this insert? Material suitability should be checked in the product matrix; the WHH15X grade is a coated carbide designed for wide applicability, but the exact compatibility for the P3204-D20 WHH15X depends on the workpiece material. How does the D20 chipbreaker improve milling performance? The D20 chipbreaker on the P3204-D20 WHH15X promotes controlled chip formation and evacuation, reducing the likelihood of recutting chips and helping to maintain consistent cutting conditions and surface quality. Is this insert suitable for heavy-duty milling? The coated carbide composition and the insert geometry support robust performance; however, cutting conditions and suitability for heavy-duty operations should be validated against the manufacturer’s recommended parameters and the product matrix. How can the insert be specified in tool management systems? Use the ISO designation P3204-D20 WHH15X and the SKU P3204-D20-WHH15X-WALTER for unambiguous ordering and tool tracking; these references ensure consistent stocking and parameter assignment. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names belong to their respective owners and are used for explanation only. The offered article is an original, factory-new product of the manufacturer.
P3204-D20 WKP25 Wendeplatten - Walter Tools
Benefit from the WKP25 coated grade together with the D20 chipbreaker for dependable milling of steel and cast iron; combine consistent chip control and wear resistance to improve process stability. Order directly via Metav Werkzeuge or consult our specialists for application-specific cutting data and process optimisation. P3204-D20 WKP25 milling indexable insert — Coated carbide, D20 chipbreaker | Walter Tools The P3204-D20 WKP25 is a milling indexable insert designed for general milling of steel and cast iron, offering a robust coated-carbide grade and a D20 chipbreaker for stable material removal. Coated WKP25 grade for wear resistance D20 chipbreaker for stable chip control Suited for steel and cast iron milling Walter Schneidstoffsorte open series Predictable chip control reduces downtime and cycle variation The D20 chipbreaker is engineered to produce short, repeatable chips when machining steel and cast iron, which reduces the risk of chip entanglement and tool interference. A controlled chip formation shortens non-productive time for chip clearing and helps maintain consistent cutting conditions; this translates into fewer interruptions on the machine and a more reliable production rhythm. For operators unfamiliar with chipbreaker terminology: a chipbreaker is a micro-geometry that splits and curls the metal chips so they evacuate safely and predictably. Coated WKP25 grade for extended tool life and process stability The WKP25 designation denotes a coated carbide grade selected by Walter Tools for balanced hardness and toughness in mixed applications. The coating enhances resistance to abrasive wear and high-temperature micro-welds at the cutting edge, which helps sustain surface finish and dimensional repeatability. In practice, the coated substrate supports longer edge life in cyclic production runs, offering a favourable ratio of tool life to productivity for batch and continuous milling. Clear application range and ISO-based suitability This indexable insert is matched to ISO material groups P (steel) and K (cast iron), meaning it is tailored for the thermal and mechanical conditions typical of these families. For shops that process mixed batches, the insert’s compatibility across both groups simplifies tool logistics and reduces the need for frequent insert changes. The combination of grade and chip geometry makes the insert suited to a wide range of general-purpose milling tasks where consistent surface quality and process security matter more than extreme niche performance. Straightforward selection and secure integration into tool systems Designated as P3204-D20 and specified in the Walter Schneidstoffsorte open series, the insert integrates with standard milling toolholders that accept this shape and chipbreaker. The indexable format allows quick replacement of cutting edges without regrinding, supporting predictable tool costs and fast turnaround during maintenance. For technical planning, request the cutting data sheet from Metav Werkzeuge or ask for recommended speeds and feeds tailored to workpiece alloy and cutter diameter. Contact Metav Werkzeuge for tailored cutting data and process advice on the Walter Tools P3204-D20 WKP25 and secure the right tool setup for your milling applications Technical data Article number: P3204-D20-WKP25-WALTER Designation: P3204-D20 WKP25 Manufacturer: Walter Tools Core technical data Grade: WKP25 Chipbreaker: D20 Application: Steel (P) and cast iron (K) Material type: coated carbide Special features Series: Walter Schneidstoffsorte - Serie offen Indexable insert for milling Optimised for repeatable short chips Coating for improved wear resistance FAQ What workpiece materials is this insert suitable for? The P3204-D20 WKP25 insert is designed for machining steel (ISO group P) and cast iron (ISO group K), combining a coated carbide grade with a D20 chipbreaker for stable performance on these materials. How does the D20 chipbreaker affect machining? The D20 chipbreaker on this insert promotes short, controlled chips which improve chip evacuation, reduce re-cutting, and help maintain consistent cycle times during milling of steel and cast iron. Is this insert part of a specific Walter Tools series? Yes, the insert belongs to the Walter Schneidstoffsorte open series and is offered in the WKP25 coated-carbide grade for general-purpose milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected products are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original and brand-new from the manufacturer.
P3204-D20 WSM36G WSM36G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold surface engineering, the WSM36G grade and the D20 chipbreaker to achieve stable chip formation and prolonged cutting-edge life in demanding materials; order the inserts directly via Metav Werkzeuge or consult the team for application advice. P3204-D20 WSM36G — milling indexable insert by Walter Tools (Tiger·tec Gold, D20 chipbreaker) P3204-D20 WSM36G is a high-performance milling indexable insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering reliable chip control and extended tool life. Tiger·tec Gold coated for enhanced wear resistance WSM36G grade for rostfreier Stahl and superalloys D20 chipbreaker for reliable chip control Coated carbide for improved cutting-edge stability Consistent performance in demanding materials The insert from the Tiger·tec Gold family combines a WSM36G grade with a proven coating architecture that supports machining of rostfreier Stahl and high-temperature alloys. The substrate is a coated carbide, engineered to resist thermal and mechanical loading; this reduces the tendency for built-up edge and supports more stable cutting conditions. For production environments where process stability and repeatable component quality matter, the combination of grade and coating translates into fewer tool changes and lower scrap rates. The statement “coated cemented carbide” here describes a wear-resistant base material with a multi-layer surface finish that protects the cutting edge under elevated temperatures. Engineered chip control for uninterrupted machining Built around the D20 chipbreaker, this insert ensures consistent chip control even when tackling tough materials that typically form long, stringy chips. The chipbreaker geometry is matched to the grade and coating to promote predictable breakage and evacuation, reducing the risk of recut marks and machine downtime. Explaining the term simply: a chipbreaker alters the way a chip deforms so that chips are broken into manageable segments, improving safety and enabling longer uninterrupted cuts. The result is smoother operation on the machine bed and improved cycle-time reliability for serial production. Reliable wear resistance and predictable tool life The design emphasises wear resistance and cutting-edge stability, delivering longer intervals between indexings and predictable tool-change scheduling. For shops processing rostfreier Stahl or nickel-based alloys, this means more consistent surface finish and dimensional accuracy over a tool’s life. The insert supports conservative productivity gains by decreasing unscheduled interventions and enabling operators and process planners to rely on documented performance characteristics. In addition, the coated architecture contributes to heat management at the cutting zone, which is crucial when machining alloys that are poor conductors of heat. Contact Metav Werkzeuge for tailored application support and secure supply of P3204-D20 WSM36G inserts from Walter Tools Technical Data Article number: P3204-D20-WSM36G-WALTER Name: Fräswendeschneidplatte P3204-D20 WSM36G Manufacturer: Walter Tools Core data Series: Tiger·tec Gold Grade: WSM36G Chipbreaker: D20 Material groups: S / M Special features Coating: Tiger·tec Gold coated cemented carbide Suitable for: rostfreier Stahl; heat-resistant superalloys and titanium (S and M) Application focus: machining hard-to-machine materials FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The P3204-D20 WSM36G insert is specified for rostfreier Stahl (material group M) and provides stable chip formation and edge life in such applications. What does the WSM36G designation mean for performance? WSM36G denotes a Walter Tools grade in the Tiger·tec Gold family that focuses on thermal and mechanical stability, offering enhanced wear resistance when machining high-demand materials. How does the D20 chipbreaker affect machining? The D20 chipbreaker promotes predictable chip breakage and evacuation, improving process reliability and reducing the risk of chip-related interruptions during milling. Can the insert be used for titanium and heat-resistant alloys? Yes. The grade and coating support material group S applications, making the insert suitable for titanium and heat-resistant superalloys where heat resistance and cutting-edge stability are required. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D20 WSP46G WSP46G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD performance, a dedicated D20 chipbreaker and broad material capability (P/M/S) for reliable, high‑productivity milling. Order the insert directly via Metav Werkzeuge or consult our specialists for process recommendations. P3204-D20 WSP46G milling insert — Tiger·tec Gold, D20 chipbreaker (Walter Tools) The P3204-D20 WSP46G is a precision indexable milling insert designed for demanding milling tasks across steels, rostfreier Stahl and heat‑resistant alloys, offering a balance of toughness and wear resistance in general face and profile milling applications. Milling insert P3204‑D20 WSP46G by Walter Tools Tiger·tec Gold PVD for extended tool life Versatile for Stahl, rostfreier Stahl and superalloys D20 chipbreaker for stable chip control Higher productivity through wear‑resistant coating and edge stability The combination of the Tiger·tec Gold series and the WSP46G grade provides a PVD coating on a coated carbide substrate that improves wear resistance while maintaining toughness. This design reduces flank and crater wear during moderate to demanding cuts, which supports longer service intervals and fewer indexings. The integrated D20 chipbreaker promotes consistent chip formation, reducing the risk of built‑up edge and enabling stable cutting forces — a direct benefit for production environments seeking predictable cycle times and reduced tool management. Broad material capability with clear machining orientation Specified for ISO group P / M / S, the insert is suitable for machining Stahl (P), rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The grade WSP46G is engineered to deliver secure chip control and edge stability where conventional grades struggle with heat and adhesion. For users machining mixed batches — including tough, ductile stainless components and demanding superalloys — this solution reduces changeovers and simplifies tooling strategies while maintaining surface integrity and process reliability. Practical gains: efficiency, repeatability and process security In practice, the insert supports efficient material removal rates with a reliable edge life, which contributes to lower overall machining costs per component. The PVD surface treatment complements the carbide substrate to withstand thermally aggressive cuts, while the chipbreaker geometry helps evacuate chips reliably. For workshops aiming to standardise tooling across a range of alloys, this insert offers a pragmatic balance between tool life and productivity, backed by a reputable industrial brand recognised for consistent tool performance. Contact Metav Werkzeuge to discuss how Walter Tools' P3204‑D20 WSP46G can optimise milling cycles and to arrange delivery or tailored technical advice Technical Data Article number: P3204-D20-WSP46G-WALTER Name / designation: P3204-D20 WSP46G Product type: Fräswendeschneidplatte (milling insert) Series: Tiger‑tec Gold Grade: WSP46G Chipbreaker: D20 Material groups: P / M / S Manufacturer: Walter Tools UID: P3204-D20-WSP46G-WALTER Facts Grade designation: WSP46G Coating technology: Tiger·tec Gold (PVD) Chip control: D20 Applicability per ISO 513: P, M, S Material base: coated carbide Special features Coating: PVD, Tiger·tec Gold Substrate: coated carbide (beschichtetes Hartmetall) Suitable for: Stahl, rostfreier Stahl, superalloys/titan Application: general milling operations, stable chip formation Design: indexable insert for efficient machining FAQ What materials can this insert machine effectively? The P3204‑D20 WSP46G insert by Walter Tools is designed for machining Stahl (P), rostfreier Stahl (M) and heat‑resistant alloys/titan (S) as specified for ISO 513 material groups. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on the WSP46G grade reduces adhesive wear and improves thermal resistance, which enhances edge life and repeatability under milling conditions. What is the role of the D20 chipbreaker? The D20 chipbreaker geometry provides controlled chip formation and evacuation, which contributes to stable cutting forces and reduced risk of built‑up edge during medium to high material removal rates. Is this insert suitable for mixed‑material production runs? Yes, the WSP46G's balance of toughness and wear resistance makes it appropriate for mixed batches containing Stahl, rostfreier Stahl and certain superalloys, simplifying tooling logistics. Which brand manufactures this insert and what is the designation? The milling insert P3204‑D20 WSP46G is manufactured by Walter Tools and carries the designation P3204‑D20 WSP46G (SKU P3204‑D20‑WSP46G‑WALTER). Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is a brand of Walter AG Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and do not indicate any affiliation with or endorsement by those trademark holders. The offered item is an original, factory‑new product of the manufacturer.
P3204-D25 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade and a D25 chipbreaker to improve chip control and extend tool life; order directly via Metav Werkzeuge or contact our consultants for tailored advice. P3204-D25 WHH15X – Milling indexable insert, D25 chipbreaker, Walter Tools The P3204-D25 WHH15X is a precision milling indexable insert designed for versatile machining tasks, featuring a coated carbide grade and a D25 chipbreaker for controlled chip formation in a wide range of applications. Universal coated carbide grade WHH15X D25 chipbreaker for reliable chip control Open series for broad material coverage Original Walter Tools quality and consistency Precise chip control for consistent surface finish The insert combines a coated carbide grade with the D25 chipbreaker, producing short, manageable chips and reducing the risk of re-cutting. This results in more consistent surface quality and fewer interruptions in automated processes. The controlled chip flow reduces heat concentration at the cutting edge, which helps to maintain a stable cutting geometry and contributes directly to longer tool life. For production environments where uptime and repeatability matter, the engineered chip control delivers a measurable improvement in cycle reliability while simplifying chip evacuation from the cutting zone. Flexible application scope with a production-oriented edge Delivered in Walter’s open series, the grade WHH15X is a coated hardmetal variant intended for general-purpose milling; material suitability should be confirmed against the product matrix to ensure optimal results. The coating enhances wear resistance and promotes consistent performance across variable cutting conditions. As an indexable solution, the insert supports quick replacement and minimal set-up time, which improves overall operational efficiency. Customers benefit from predictable tool behaviour that eases process planning and reduces the frequency of unexpected tool changes. Practical integration into machining workflows As an indexable component, the insert simplifies inventory management and contributes to cost-effective tooling strategies by enabling multiple edge usages before disposal. Compatibility with standard toolholders and straightforward seating minimise machine downtime during tool changeovers, which supports continuous production. Technical teams will appreciate the clarity of the insert’s designation and chipbreaker specification for process documentation and tooling lists, enabling traceable, repeatable setups and smoother integration into existing machining cycles. For procurement or application advice regarding the Walter Tools milling indexable insert P3204-D25 WHH15X, contact Metav Werkzeuge for tailored recommendations and order support. Technical Data Article number: P3204-D25-WHH15X-WALTER Designation: P3204-D25 WHH15X Product type: Milling indexable insert Manufacturer: Walter Tools Material: Catalogue dependent Chipbreaker: D25 Facts Grade: WHH15X Schneidstoffklasse: Coated carbide Series: Walter Schneidstoffsorte - Serie offen Special features Original Walter Tools product Open series for broad material coverage Check product matrix for material suitability FAQ What chip control does this insert provide? The P3204-D25 WHH15X utilises a D25 chipbreaker that produces short, well-controlled chips, improving evacuation and surface finish during milling. Which grade is used on this insert? This insert is supplied in the WHH15X coated carbide grade, engineered by Walter Tools for balanced wear resistance and performance. Is the insert suitable for all materials? The insert belongs to an open series with broad potential coverage; specific suitability should be checked in the product matrix before application. How is this insert integrated into production tooling? As an indexable insert, it fits standard milling holders and allows rapid edge changes, supporting reduced downtime and consistent setup repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are stated for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item from Walter Tools is original, brand-new goods from the manufacturer.
P3204-D25 WSM36G WSM36G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold combination of thermal resistance and edge stability together with the WSM36G coated‑carbide grade for reliable machining of stainless steels and heat‑resistant superalloys; order via Metav Werkzeuge or consult the technical team for application guidance. P3204-D25 WSM36G milling insert (Tiger·tec Gold, D25) – Walter Tools The P3204-D25 WSM36G is a coated carbide milling insert designed for heavy machining of stainless steels and heat‑resistant superalloys, offering stable chip formation and extended tool life. Tiger·tec Gold coating for high thermal resistance Optimised for stainless steel and superalloys D25 chipbreaker for stable chip control Coated carbide grade WSM36G for long life Increased process reliability through optimised coating and grade The combination of the Tiger·tec Gold coating and the WSM36G coated‑carbide grade provides a marked improvement in thermal resistance and wear behaviour compared with uncoated grades. This results in more consistent cutting forces and fewer unplanned tool changes when machining tough materials. For operations where heat build‑up and built‑up edge are common—particularly in rostfreier Stahl—this insert supports stable chip formation and a reproducible cutting edge, reducing rework and contributing to higher first‑pass yields. The technical design therefore benefits cycle time and machine uptime. Consistent chip control and surface quality for demanding materials The D25 chipbreaker geometry is engineered to produce controllable chip shapes when cutting ductile, heat‑sensitive alloys. Controlled chip evacuation lowers the risk of surface damage and improves productivity by reducing manual intervention. In practical terms, this means fewer interruptions for clearing chips and a more reliable surface finish on complex contours. The insert’s geometry, in combination with the coated carbide substrate, is aimed at balancing cutting stability with the need for good workpiece integrity in stainless steels and superalloys. Efficient tool life and lower tooling costs through targeted performance By focusing on thermal resistance and edge strength, the insert extends effective tool life in challenging applications. The coated carbide construction and the Tiger·tec Gold technology help to delay flank wear and maintain a sharp cutting edge under high thermal load. The result is a reduced frequency of insert indexings and replacements, which lowers tooling consumption and the associated handling time. For production environments where tool change time directly affects throughput, this translates into tangible efficiency gains and a better return on tooling investment. Practical fitment and application guidance for everyday machining This insert is specified with the ISO designation P3204‑D25 WSM36G, making it straightforward to match with compatible toolholders and milling systems. Suitable for a range of operations on stainless steels and heat‑resistant superalloys, the insert is particularly appropriate where secure chip control and thermal stability are priorities. For component families that demand repeatable results and consistent surface quality, this option integrates into established machining cycles without the need for extensive process revalidation. Contact Metav Werkzeuge for tailored application advice or to arrange supply of the Walter Tools P3204‑D25 WSM36G milling insert; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: P3204-D25-WSM36G-WALTER Label: Fräswendeschneidplatte P3204-D25 WSM36G Walter Tools Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Grade/Series: Tiger·tec Gold, WSM36G ISO designation: P3204-D25 WSM36G Core data Material groups: S / M Chipbreaker: D25 Coating technology: Tiger·tec Gold Substrate: coated carbide (as per grade WSM36G) Special features Suited for rostfreier Stahl (stainless steels) and heat‑resistant superalloys Designed for stable chip formation and edge security Optimised for heavy machining where thermal resistance is required ISO‑compatible insert geometry for common milling holders FAQ What materials can this insert machine effectively? The P3204‑D25 WSM36G insert is optimised for machining stainless steels and heat‑resistant superalloys, offering thermal resistance and controlled chip formation for these groups. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating increases thermal resistance and reduces wear, which helps the WSM36G grade maintain edge stability and extend usable tool life under high thermal load. Is the D25 chipbreaker suitable for finishing passes? The D25 chipbreaker is intended to provide stable chip control and can support both semi‑finishing and finishing operations when the cutting data is adapted to the workpiece and machine conditions. Can the insert be used in standard ISO toolholders? Yes, the insert carries the ISO designation P3204‑D25 WSM36G, facilitating straightforward selection of compatible toolholders and integration into existing tool systems. What distinguishes the WSM36G grade from general‑purpose inserts? WSM36G is a Walter‑developed coated‑carbide grade tailored for difficult‑to‑machine materials, prioritising thermal resistance and edge stability to reduce built‑up edge and improve process security. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
P3204-D25 WSP46G WSP46G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust D25 chipbreaker and versatile P/M/S suitability to secure higher process reliability and longer tool life in milling operations — order the insert directly via Metav Werkzeuge or consult the team for application support. P3204-D25 WSP46G indexable milling insert — Tiger·tec Gold, D25 chipbreaker, Walter Tools The P3204-D25 WSP46G is an indexable milling insert designed for versatile machining tasks, optimised for demanding milling of Stahl, rostfreier Stahl and heat‑resistant alloys. Tiger·tec Gold PVD-coated carbide Suitable for Stahl, rostfreier Stahl and superalloys D25 chipbreaker for controlled chip formation Robust cutting edge for stable high‑feed milling Consistent cutting performance across mixed materials The Tiger·tec Gold coating delivers a balance of wear resistance and thermal stability, making the insert particularly effective when machining a range of materials classified P, M and S. The P designation covers unalloyed and alloyed Stahl, the M group denotes rostfreier Stahl and the S group comprises heat‑resistant superalloys and Titan. Because the grade is a PVD‑coated carbide, it supports secure chip formation and reduced flank wear under the higher temperatures typical of milling operations, which in turn helps maintain component tolerances and repeatability. Reliable chip control and uninterrupted production The integrated D25 chipbreaker is engineered to shape and evacuate chips reliably during interrupted or heavy milling, lowering the risk of built‑up edge and tool damage. With a stable cutting geometry and optimised chip segmentation, the insert contributes to steady machining cycles and fewer tool changes. The result is improved process reliability and predictable productivity, especially in high‑mix workshops where stable chip control reduces downtime and rework. Extended tool life through optimised coating technology The Tiger·tec Gold series combines a wear‑resistant substrate with a specialised coating that protects the cutting edge against abrasive and thermal loads. This combination extends tool life and preserves edge integrity in demanding applications, which lowers tooling costs per manufactured part over time. The coated grade WSP46G is formulated for toughness and edge stability, so it resists chipping when encountering varying material batches or challenging cut conditions. Practical selection and application guidance For milling tasks requiring a balance between productivity and finish, select the insert when facing mixed‑material batches or components with intermittent cuts. The designation P3204‑D25 indicates the geometry and chipbreaker type; WSP46G identifies the Tiger·tec Gold grade suited to versatile applications. When toolpath planners prioritise consistent surface quality and reduced tool interventions, this insert offers a pragmatic combination of process security and durability that supports leaner production sequences. For tailored cutting data, reconditioning advice and prompt supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — the team will advise on optimal insert choices and batch availability Technical Data SKU: P3204-D25-WSP46G-WALTER Designation: P3204-D25 WSP46G Manufacturer: Walter Tools Product type: Indexable milling insert Facts Grade / material code: P / M / S Series: Tiger·tec Gold Sort: WSP46G Special features Chipbreaker: D25 Coating: Tiger·tec Gold (PVD) Substrate: Coated carbide Suitable for: Stahl Suitable for: rostfreier Stahl Suitable for: heat‑resistant superalloys and Titan FAQ What is the primary application of this insert? The P3204‑D25 WSP46G insert from Walter Tools is intended for milling operations across Stahl, rostfreier Stahl and heat‑resistant alloys, offering robust chip control and a durable PVD coating. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold extends tool life and improves thermal resistance; in this insert the coating helps maintain a stable cutting edge and consistent surface quality during prolonged milling cycles. Which chipbreaker is fitted and what does it achieve? The D25 chipbreaker controls chip formation for safer evacuation and reduced built‑up edge, supporting uninterrupted machining and predictable tool life. Manufacturer: Walter Tools; Walter AG; Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for clarification only. There is no connection between our company and the mentioned brands; the offered item is an original, factory‑new product of the manufacturer.
P3204-D25.4 WHH15X Wendeplatten - Walter Tools
Take advantage of a coated carbide grade WHH15X and a D25.4 chipbreaker for reliable chip control and productive milling cycles; order the inserts directly via Metav Werkzeuge or consult their specialists for application matching and material compatibility. P3204-D25.4 WHH15X — Indexable milling insert with WHH15X coated carbide, chipbreaker D25.4 | Walter Tools The P3204-D25.4 WHH15X is an indexable milling insert based on a coated carbide grade, designed for versatile industrial milling tasks where predictable wear behaviour and controlled chip formation are required Coated carbide grade WHH15X Chipbreaker D25.4 for reliable chip control Open series for broad application range Designed for productive, repeatable milling Consistent wear resistance for stable production The insert is manufactured in a coated carbide grade, WHH15X, which provides a balance between wear resistance and toughness that supports consistent performance in repetitive milling operations. This composition is intended to reduce flank and crater wear under typical cutting conditions, which leads to longer periods between indexings and fewer unexpected tool changes. For process planning, compatibility with the specific workpiece material should be verified against the product matrix; this ensures the chosen grade matches the thermal and mechanical demands of the application. The result is improved machine uptime and a more predictable production flow. Better chip control reduces rework and downtime A clearly defined chipbreaker D25.4 offers controlled chip formation, which reduces the risk of long, tangled chips and helps to protect both the tool and the workpiece. Controlled chips are easier to evacuate, which supports consistent surface qualities and lowers the likelihood of rework caused by chip-related damage. In practice, this translates to steadier cycle times and a safer machining environment. The insert geometry is tuned so that cutting forces remain stable across the tool life, contributing to higher process security and repeatable results. Flexibility and predictable tool costs in series production Offered as part of an open series, the insert matches a wide selection of toolholders and milling strategies, making it straightforward to integrate into existing tool sets. The indexable concept means worn cutting edges can be rotated or replaced without a full-tool exchange, which reduces consumable costs and simplifies inventory management. The combination of the WHH15X coating and the D25.4 chipbreaker aims to deliver repeatability and consistent finish quality when used within its specified application window. For exact material recommendations and cutting data, consult the manufacturer’s product matrix to align tool life expectations with machining parameters. Contact Metav Werkzeuge for tailored application advice on Walter Tools' P3204-D25.4 WHH15X and to request matching inserts or cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P3204-D25.4-WHH15X-WALTER Manufacturer: Walter Tools Product type: Indexable milling insert Designation: P3204-D25.4 WHH15X Facts Chipbreaker: D25.4 Coating/class: Coated carbide (WHH15X) Special features Series: Walter Schneidstoffsorte - Serie offen Material specification: Katalogabhängig SKU: P3204-D25.4-WHH15X-WALTER Note: Check product matrix for material suitability FAQ What does the WHH15X marking indicate? WHH15X identifies the coated carbide grade used for the insert; it denotes a specific combination of substrate and coating properties that control wear behaviour. Material suitability should be checked against the manufacturer’s product matrix for optimal results. How does the D25.4 chipbreaker affect machining? The D25.4 chipbreaker is a designated geometry that shapes chip formation to promote short, manageable chips. In practice, this improves chip evacuation, supports better surface finish and reduces the risk of chip-induced tool or workpiece damage. Can this insert be used with existing indexable toolholders? The insert is supplied as an indexable milling insert in an open series, facilitating integration with standard toolholders; compatibility should be verified with the toolholder specification and the insert seating geometry. How should the P3204-D25.4 WHH15X be specified for reordering? Use the SKU or designation for reordering: P3204-D25.4-WHH15X-WALTER or the designation P3204-D25.4 WHH15X to ensure the exact grade and chipbreaker are supplied Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes. The offered article is original, factory-new goods of the manufacturer.
P3204-D25.4 WSM36G WSM36G Wendeplatten - Walter Tools
Take advantage of the WSM36G grade together with Tiger‑tec Gold coating for reliable machining of demanding alloys; the combination of heat resistance and stable chip control supports consistent production. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. P3204-D25.4 WSM36G milling insert (Tiger‑tec Gold) by Walter Tools — for stainless steel and superalloys P3204-D25.4 WSM36G is a triangular milling indexable insert designed for heavy-duty and heat-challenging materials, delivering stable cutting behaviour in applications involving stainless steels and heat-resistant superalloys Tiger‑tec Gold coating for heat resistance WSM36G grade for stainless and superalloys D25.4 chipbreaker for secure chip control Stable cutting edge and consistent performance High-performance machining for heat-prone materials The P3204-D25.4 WSM36G insert is engineered for tough applications where temperature and material adhesion challenge tool life. The WSM36G grade is a coated carbide specifically adapted to maintain edge stability when machining stainless steel and superalloys. In practice, this means less edge build-up and fewer interruptions for edge dressing, which raises process uptime. The combination of a robust substrate and advanced coating reduces abrasive and thermal wear so that toolpaths remain predictable even under elevated cutting temperatures. Coating and grade explained for reliable results The Tiger‑tec Gold coating provides improved heat resistance and surface hardness compared with uncoated grades, aiding performance when cutting materials that generate significant heat at the tool interface. The coating works together with the coated carbide substrate to control flank and crater wear. For workshops new to coated grades, this translates into longer intervals between insert changes and more consistent part geometry. The WSM36G designation signals a balance of toughness and temperature resistance suitable for demanding materials rather than general-purpose steel machining. Practical benefits: chip control and edge stability Built-in chip control is critical when working with sticky or ductile alloys. The D25.4 chipbreaker geometry promotes controlled fragmenting and evacuation of chips, reducing the risk of re-cutting and workholding interference. A stable cutting edge also supports repeatable surface finish and dimensional accuracy. These process improvements reduce the need for manual intervention and support higher productive cycles, particularly in batch-oriented or lights-out operations where predictability is paramount. Integration into the toolroom and process planning The insert is compatible with toolholders designed for the P3204 pocket profile and is suited for indexable milling systems used in jobbing and production environments. When specifying feeds and speeds, account for the material group and toolholder rigidity; the Tiger‑tec Gold combination allows for higher cutting temperatures and can permit modest increases in cutting speed where coolant strategy and machine power allow. Process trials are recommended to determine optimal parameters and to match the insert’s strengths to the chosen machining strategy. Contact Metav Werkzeuge to discuss suitability for specific stainless or superalloy applications and to receive tailored recommendations for toolholders and cutting parameters — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: P3204-D25.4-WSM36G-WALTER Article: P3204-D25.4 WSM36G Type: Milling indexable insert (triangle) Brand: Walter Tools Core data Series: Tiger‑tec Gold Grade: WSM36G Chipbreaker: D25.4 Material suitability: S / M Special features Coated carbide grade Optimised for stainless steel and superalloys Designed for stable cutting edge and chip control Suitable for demanding, heat-prone milling operations FAQ What materials is this insert best suited for? The insert is specified for stainless steel and heat-resistant superalloys; the WSM36G grade and Tiger‑tec Gold coating are tailored to these groups. How does the D25.4 chipbreaker affect machining? The D25.4 chipbreaker promotes controlled chip formation and evacuation, improving surface quality and reducing re-cutting during milling. Can the insert withstand high cutting temperatures? Yes, the Tiger‑tec Gold coating increases heat resistance and, together with the substrate, limits thermal wear for more consistent performance. Is this insert compatible with standard P3204 toolholders? The designation corresponds to common P3204 pocket profiles; verification with the chosen toolholder is recommended before series use. Who manufactures this product? The insert is an original Walter Tools product produced under the Walter organisation and distributed through authorised channels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer Walter Tools.
P3204-D25.4 WSP46G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating, the versatile WSP46G grade and the D25.4 chipbreaker for stable cutting and reliable chip control — order the insert directly via Metav Werkzeuge or ask the consultants for application-specific guidance. P3204-D25.4 WSP46G indexable milling insert — Tiger·tec Gold by Walter Tools P3204-D25.4 WSP46G is an indexable milling insert engineered for versatile milling in steel, stainless steel and heat-resistant alloys; optimised for stable edges and consistent performance in demanding cuts Tiger·tec Gold PVD-coated carbide technology Designed for steel, stainless and superalloys D25.4 chipbreaker for reliable chip control Robust grade WSP46G for versatile milling Predictable performance thanks to advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP46G grade delivers consistent wear resistance and a stable cutting edge in a wide range of milling tasks. The coating is a PVD-type layer applied to a coated carbide substrate, which reduces flank wear and extends usable tool life under thermal stress. For production environments this means fewer insert changes and more predictable cycle times, supporting higher overall equipment efficiency. Improved chip control to reduce interruptions Equipped with the chipbreaker D25.4, this insert is designed to promote controlled chip formation during milling. A dedicated chipbreaker geometry guides chip flow away from the cutting zone, which reduces the risk of re-cutting and machine interruptions. The practical benefit is a cleaner process window, easier swarf handling and reduced secondary operations caused by erratic chips. Broad material range simplifies tooling management This grade is specified for ISO groups P / M / S — that is, unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys including titanium. Using one insert family across multiple materials helps to reduce inventory complexity. For workshops that machine mixed batches, the ability to rely on a single, robust grade improves setup flexibility and lowers the number of inserts required on the shelf. Consistent edge stability for dependable surface quality The metallurgical design of the cutting grade emphasises edge strength and resistance to built-up edge under heat-generating cuts. As a result, the insert supports reproducible surface finishes and dimensional stability across production runs. For users seeking to balance tool life with surface integrity, the combination of PVD-coated protection and a tough substrate gives a pragmatic compromise between wear resistance and edge retention. For application advice or to secure reliable supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 — our consultants can recommend the optimised insert selection for each milling task Technical Data SKU: P3204-D25.4-WSP46G-WALTER Article: P3204-D25.4 WSP46G Type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Chipbreaker: D25.4 Material groups: P / M / S Special features Grade: WSP46G Coating technology: Tiger·tec Gold (PVD) Substrate: Coated carbide Typical application: versatile milling in steel, stainless steel and superalloys ISO designation: P3204-D25.4 WSP46G FAQ What materials is this insert suitable for? The P3204-D25.4 WSP46G insert from Walter Tools is intended for materials in ISO groups P, M and S — specifically steel, stainless steel and heat-resistant superalloys. What advantages does Tiger·tec Gold provide? The Tiger·tec Gold PVD coating offers improved thermal and abrasive resistance, which helps the insert maintain a stable cutting edge for longer and supports consistent machining results. When should the D25.4 chipbreaker be chosen? The D25.4 chipbreaker is suitable when reliable chip control is required to prevent long, tangled chips and to improve swarf evacuation in both general milling and mixed-material operations. How does WSP46G compare to more specialised grades? WSP46G is a versatile, tough grade aimed at combining edge stability with good wear resistance across many milling tasks, making it a pragmatic choice where flexibility and robust performance are priorities. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D30 WHH15X Wendeplatten - Walter Tools
Benefit from the combination of coated carbide WHH15X, a D30 chipbreaker and the P3204 geometry for productive, reliable milling with stable chip formation; order the insert directly via Metav Werkzeuge or consult our specialists for selection support. P3204-D30 WHH15X milling insert — coated carbide, D30 chipbreaker (Walter Tools) The P3204-D30 WHH15X is a milling insert engineered for productive metalcutting applications, combining a coated carbide grade with a D30 chipbreaker to enhance chip control and process stability. Coated carbide WHH15X for long tool life D30 chipbreaker for controlled chip flow P3204 geometry for versatile milling Open series for broad material range Predictable chip control for higher throughput The combination of the chipbreaker D30 with a coated carbide grade provides consistent chip formation and evacuation, which directly improves cycle times and reduces downtime. Designed to support productive strategies, the geometry helps to maintain a stable cutting edge under varying depths of cut and feed rates. For machining planners this translates into a lower cost per component and fewer process interruptions. Suitability for specific workpiece materials should be verified against the product matrix to match the grade to the application. P3204 geometry enabling flexible milling strategies The P3204 form offers a balance between entry stability and radial cutting engagement, making it suitable for a range of milling operations from light finishing to more aggressive material removal. The geometry influences cutting forces and tool deflection; when paired with the WHH15X grade, it promotes consistent surface finish while allowing adaptable feeds and speeds. In practice, this means one insert can cover several operations, supporting lean tool inventories and simplified tool setup. Durable performance backed by industry-grade design Manufactured under the Walter Tools portfolio, the insert series features a coated carbide composition intended for robust wear resistance and repeatable performance. The open-grade approach of the series allows selection of the best match for varied materials, while the chip control design reduces the risk of edge build-up and workpiece damage. For process engineers seeking predictable throughput, the mix of longer tool life and process security makes this insert a pragmatic choice; check the product matrix for definitive material suitability. Contact Metav Werkzeuge for assistance in selecting the correct Walter Tools P3204-D30 WHH15X milling insert and to arrange procurement or technical clarification. Technical data Article number: P3204-D30-WHH15X-WALTER SKU: P3204-D30-WHH15X-WALTER Product type: Milling insert Designation: P3204-D30 WHH15X Grade: WHH15X Numbers / Core technical data Form designation: P3204-D30 Chipbreaker: D30 Series: Walter Schneidstoffsorte - Serie offen Designs / Special features Coated carbide (described as coated hardmetal in series) Material details: catalogue-dependent Optimised for stable chip formation Suitable for a broad material range — verify via product matrix FAQ What materials is this insert suitable for? The P3204-D30 WHH15X insert is part of an open series; material suitability depends on the chosen grade — the WHH15X is a coated carbide option and suitability should be checked in the product matrix for each workpiece material. How does the D30 chipbreaker affect machining? The D30 chipbreaker promotes controlled chip formation and evacuation, which improves process stability and reduces the likelihood of chip-related interruptions when using the P3204-D30 WHH15X insert. Can the insert be used for both finishing and roughing? Yes, the P3204 geometry allows flexible engagement; paired with the WHH15X grade the insert supports a range from finishing to more aggressive milling operations depending on cutting parameters. Is the WHH15X grade coated or uncoated? The WHH15X grade is specified as a coated carbide type within the Walter Schneidstoffsorte series, offering enhanced wear resistance for demanding milling tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Gesetzlich geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D30 WSM36G WSM36G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold coating and the WSM36G grade provide excellent heat resistance and a stable cutting edge for heavy-duty milling of difficult materials; combine consistent chip control and extended tool life for improved process security — order directly via Metav Werkzeuge or consult the advisers for application support. P3204-D30 WSM36G — Indexable milling insert, Tiger·tec Gold, Walter Tools P3204-D30 WSM36G is an indexable milling insert engineered for heavy machining of stainless steel and heat‑resistant superalloys, delivering stable cutting performance under thermal and mechanical stress. Tiger·tec Gold coating for heat resistance WSM36G grade for stable cutting edge Optimised D30 chipformer for reliable chip control Maximise process security with high thermal resistance The combination of the Tiger·tec Gold coating and a coated carbide substrate gives the insert exceptional thermal stability and wear resistance during intensive cutting. This thermal robustness reduces the risk of edge breakdown when machining stainless steel and superalloys, where heat builds up quickly and chips tend to weld to the edge. The coating technology increases tool life and ensures more consistent cutting forces, which translates into fewer interruptions and improved overall productivity. Technical terms: the coating is a multi‑layer CVD/PVD style treatment that enhances surface hardness and reduces chemical affinity between chip and tool. Consistent chip control for predictable surface quality The D30 chipformer geometry is designed to produce controllable, segmented chips when cutting tough materials, supporting stable chip evacuation and reducing the tendency to form built‑up edge. Predictable chip formation helps to protect the cutting edge and maintain a constant surface finish on the workpiece. In practice, this means fewer rework steps and more reliable repeatability in series production. The product therefore supports a measurable improvement in process stability and surface quality when compared to unoptimised grades. Robust grade for demanding material groups The WSM36G grade is tailored for ISO groups M and S — specifically stainless steel (M) and heat‑resistant superalloys/titanium (S) — balancing toughness and edge stability for intermittent and continuous cuts. The insert’s composition and coating combination enable secure chip formation and a stable wear pattern, which is particularly valuable where tool life and reproducible performance are required. For users seeking a reliable solution for tough-to-machine alloys, this indexable milling insert combines economy and productivity in industrial environments. Contact Metav Werkzeuge today for tailored advice on Walter Tools Tiger·tec Gold inserts and to secure reliable machining performance — e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P3204-D30-WSM36G-WALTER Article: P3204-D30 WSM36G Type: Indexable milling insert Brand: Walter Tools Series: Tiger·tec Gold Core data Chipbreaker: D30 Grade: WSM36G Material codes: S / M ISO groups: M, S Stainless steel: yes Special features Coated carbide Suitable for difficult‑to‑machine materials Stable cutting edge and optimised chip control Designed for heavy‑duty milling applications FAQ Which materials is the P3204-D30 WSM36G suitable for? The P3204-D30 WSM36G indexable milling insert from Walter Tools is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), supporting secure chip formation in these demanding materials. What does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the P3204-D30 WSM36G increases thermal resistance and surface hardness, which leads to longer tool life and improved process stability when machining tough alloys. How does the D30 chipformer improve machining? The D30 chipformer on this Walter Tools insert shapes chips for controlled evacuation, reducing built‑up edge and helping to maintain a consistent surface finish during prolonged cuts. Is the WSM36G grade suitable for interrupted cuts? WSM36G offers a balance of toughness and edge stability that supports both continuous and moderately interrupted cuts in stainless steel and superalloys, making it a versatile choice for many milling applications. Can the P3204-D30 WSM36G improve production reliability? By combining the Tiger·tec Gold coating with the WSM36G grade and an optimised chipformer, the P3204-D30 WSM36G helps to reduce tool wear variance and contributes to more predictable production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. No connection between our company and the mentioned brands is implied. The offered item is an original factory‑new product of Walter Tools.
P3204-D30 WSP46G WSP46G Wendeplatten - Walter Tools
Take advantage of the combination of high edge stability, versatile material capability and consistent chip control for reliable milling results; order the P3204-D30 WSP46G directly via Metav Werkzeuge or consult the team for application advice. P3204-D30 WSP46G milling insert — Tiger·tec Gold coating, D30 chipbreaker, Walter Tools P3204-D30 WSP46G is a coated carbide milling insert designed for demanding milling tasks in steels, stainless steels and heat-resistant alloys Tiger·tec Gold PVD for high edge stability Grade WSP46G for versatile milling applications D30 chipbreaker for consistent chip control Suited for steel, stainless and superalloys Reliable cut quality and extended edge life for production milling The insert is manufactured in a coated carbide grade belonging to the Tiger·tec Gold family, which combines a wear-resistant PVD layer with a tough substrate to deliver stable cutting edges under varying thermal loads. This combination reduces flank wear and supports longer tool life in continuous production, meaning fewer tool changes and longer uninterrupted machining cycles. The design is particularly effective where temperature and adhesion can compromise a conventional grade, offering measurable improvements in process reliability and surface finish. Predictable chip formation and process control with the D30 breaker The D30 chipbreaker is engineered for controlled chip segmentation during peripheral and face milling. By promoting short, repeatable chips it lowers the risk of entanglement and improves swarf evacuation in medium to heavy cuts. For operations requiring consistent chip form—such as interrupted cuts or mixed-material batches—the insert’s geometry supports stable feeds and reduces the likelihood of built-up edge formation. The result is improved cycle-time predictability and easier handling of machining residues. Flexible application range across P / M / S material groups Designed for the material groups P, M and S, the insert covers a broad spectrum: unalloyed and alloyed steel, stainless steel and heat-resistant superalloys and titanium. This versatility enables a single grade to be employed across multiple workpieces, simplifying tool inventories and reducing changeover complexity. The coated grade balances toughness and wear resistance so it handles the work-hardening tendency of stainless steels as well as the thermal stresses encountered with high-temperature alloys. Integration into productive milling systems and practical advantages Marked as P3204-D30 WSP46G, the insert is compatible with standard milling cutter systems accepting the P3204 form factor and benefits from established clamping interfaces. The consistent geometry supports repeatable positioning and surface outcomes in serial production. As a component of Walter Tools’ Tiger·tec Gold range, the insert contributes to a stable process window, helping machinists achieve reproducible part quality while maintaining attractive tool-life economics. Contact Metav Werkzeuge for tailored recommendations on integrating the Walter Tools Tiger·tec Gold P3204-D30 WSP46G into specific milling processes and to check current availability and lead times Technical data SKU: P3204-D30-WSP46G-WALTER Product type: Fräswendeschneidplatte ISO designation: P3204-D30 WSP46G Grade: WSP46G Series: Tiger·tec Gold Chipbreaker: D30 Manufacturer: Walter Tools Facts Material groups: P / M / S Suitable for steel: yes Suitable for stainless steel: yes Suitable for heat‑resistant alloys/titanium: yes Special features Coating technology: Tiger·tec Gold (PVD) Substrate: coated carbide Application: milling operations, indexable insert format Target benefits: edge stability, versatile application, controlled chip formation FAQ What materials can the P3204-D30 WSP46G be used on? The P3204-D30 WSP46G is suitable for steel (P), stainless steel (M) and heat‑resistant superalloys/titanium (S), matching the Tiger·tec Gold grade’s design for diverse machining challenges. How does the D30 chipbreaker affect milling performance? The D30 chipbreaker gives consistent chip segmentation, which improves chip evacuation and reduces entanglement, supporting stable feeds and easier machine handling during milling. Is the P3204-D30 WSP46G compatible with standard milling cutter systems? Yes, the insert follows the P3204 form factor and is intended for toolholders that accept that insert geometry, enabling straightforward integration into existing cutter bodies. What machining benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on WSP46G enhances wear resistance and heat tolerance, delivering longer edge life and improved process stability in continuous and mixed‑batch production. Where can application support or purchasing information be obtained? For application-specific advice and availability of the P3204-D30 WSP46G from Walter Tools, contact Metav Werkzeuge to discuss cutting conditions and stocking options. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D31.75 WHH15X Wendeplatten - Walter Tools
Benefit from the combination of coated carbide WHH15X and the D31.75 chipbreaker to achieve stable chip formation and consistent machining performance; for application matching and supply, contact Metav Werkzeuge for tailored advice and procurement. P3204-D31.75 WHH15X milling insert with D31.75 chipbreaker by Walter Tools A robust P3204-D31.75 WHH15X indexable milling insert engineered for controlled chip formation and productive milling in industrial indexable milling applications Coated carbide grade WHH15X D31.75 chipbreaker for reliable chip control Part of Walter open-grade carbide series Optimised cutting stability for productive milling The insert is produced in a coated carbide grade that provides consistent edge behaviour under varying cutting conditions. The selection of the WHH15X grade indicates a coated cemented carbide composition designed to balance toughness and wear resistance; this supports longer productive tool life in many milling cycles. By choosing an insert from an open-grade series, workshops gain flexibility when selecting the right grade for their production needs. The technical design reduces unexpected tool changes and contributes to predictable machining cycles, which in turn supports efficient process planning and reduced machine downtime. Consistent chip control and surface quality through D31.75 The dedicated D31.75 chipbreaker is configured to manage chip formation during milling, promoting safe evacuation and preventing chip entanglement. Effective chip control reduces the risk of re-cutting and improves surface finish consistency; this is particularly valuable in serial production where reproducibility is essential. The chipbreaker geometry also eases handling of variable depths of cut and feeds, enabling more stable machining parameters and better overall component quality without extensive parameter rework. Application guidance and integration into production The insert belongs to Walter’s open-grade carbide series and is marked for catalogue-dependent material specification; the product matrix should be consulted to determine exact workpiece suitability and recommended cutting parameters. Where material or process certainty is required—such as selection between finishing and roughing strategies—referencing the matrix ensures correct grade matching. For shops seeking straightforward integration, the indexable insert format simplifies mounting and tool changeover, supporting leaner tool inventories and faster set-ups. For tailored application advice or to order WHH15X inserts from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: P3204-D31.75-WHH15X-WALTER Designation: P3204-D31.75 WHH15X Manufacturer: Walter Tools Product type: Milling insert Grade: WHH15X Series: Walter open-grade carbide series Chipbreaker: D31.75 Material information: catalogue dependent Core figures Chipbreaker: D31.75 Design and features Coated cemented carbide grade WHH15X Indexable design for secure clamping Fits P3204 insert families (designation P3204-D31.75) Intended for industrial milling applications Manufacturer: Walter Tools FAQ What materials is this insert suitable for? Material suitability must be checked against the product matrix; the P3204-D31.75 WHH15X is a coated carbide insert from Walter Tools and the exact workpiece compatibility depends on that matrix. How does the D31.75 chipbreaker affect machining? The D31.75 chipbreaker is designed to control chip formation and evacuation, helping to maintain surface quality and reduce the risk of chip-related interruptions when using the WHH15X grade. Is WHH15X a coated or uncoated grade? WHH15X is specified as a coated cemented carbide grade in the Walter open-grade series, intended to provide a balance between wear resistance and toughness for indexable milling. Where can cutting parameters and application examples be found? Cutting data and recommended applications are supplied in the product matrix and technical documentation; consult the matrix for precise parameters related to the P3204-D31.75 WHH15X insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is an original, factory-new product from the manufacturer. The brand Walter Tools is mentioned where relevant.
P3204-D31.75 WSP46G WSP46G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the robust WSP46G grade for stable, high‑productivity milling across a broad range of workpiece groups; order directly via Metav Werkzeuge or consult Metav Werkzeuge for process and grade selection. Milling Indexable Insert P3204‑D31.75 WSP46G — Coated carbide, Tiger‑tec Gold (Walter Tools) The P3204‑D31.75 WSP46G is a coated milling insert engineered for demanding milling applications, offering reliable chip control and long tool life in operations on Stahl, rostfreier Stahl and heat‑resistant alloys. Tiger‑tec Gold PVD‑coating grade Suitable for Stahl, rostfreier Stahl and superalloys Stable cutting edge for demanding milling Versatile for high‑speed and general milling Greater productivity through coating and grade optimisation The combination of Tiger‑tec Gold coating with the WSP46G grade provides a measurable improvement in cutting performance and tool life. The PVD coating reduces friction at the cutting edge and improves wear resistance, which in turn allows higher cutting speeds or longer uninterrupted cuts. For production environments this translates into fewer tool changes and improved spindle utilisation — a direct gain in throughput. The insert’s geometry and the D31.75 chipformer are engineered to support consistent chip control, reducing recutting and stabilising forces during side and face milling. Reliable performance across core material groups Designed for the machining categories P/M/S, the insert maintains a stable cutting edge when facing the typical challenges of these materials. For Stahl (unalloyed and alloyed steels), the grade handles the usual heat generation and chip forms; for rostfreier Stahl the toughness and built‑up edge tendency are mitigated by the coating and edge stability; for superalloys and titanium the grade’s heat resistance and edge integrity preserve dimensional consistency. The result is predictable surface finish and repeatable part geometry, supporting stringent quality routines in series production. Practical benefits for toolroom and production planning Using this insert supports a pragmatic tool strategy: fewer tool variants are needed when a single grade covers several material groups, simplifying inventory and reducing setup complexity. The coated carbide substrate and tailored chipbreaker mean reliable performance in interrupted cuts and variable engagement angles. Tool holders and clamping systems already in use remain compatible, allowing straightforward integration into existing setups. For process engineers, the measurable benefits are reduced cycle time per component and more consistent tool life, aiding cost‑per‑part calculations and capacity planning. For tailored advice on Walter Tools' Tiger‑tec Gold WSP46G insert and the optimal holder or cutting data for specific applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss selection and process parameters Technical Data SKU: P3204‑D31.75‑WSP46G‑WALTER Article designation: P3204‑D31.75 WSP46G Series: Tiger‑tec Gold Grade: WSP46G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Chipbreaker: D31.75 Applicable groups: P / M / S UID: P3204‑D31.75‑WSP46G‑WALTER Special features Coating technology: Tiger‑tec Gold (PVD) Material compatibility: Stahl, rostfreier Stahl, superalloys (S) Intended use: Milling applications, versatile P/M/S coverage Insert designation: P3204‑D31.75 Durable cutting edge and optimised chip control FAQ What materials can this insert machine effectively? The WSP46G grade is specified for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (group S); the combination of Tiger‑tec Gold coating and the insert geometry supports reliable chip formation in these groups. Is the P3204‑D31.75 suitable for high‑speed milling? Yes, the coated carbide grade and chipbreaker D31.75 are designed to tolerate higher cutting speeds while maintaining stable cutting edge behaviour and consistent chip evacuation. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold PVD coating reduces friction and improves wear resistance, which typically extends tool life and enables longer engagement times under industrial milling conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P3204-D32 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated cemented carbide performance, reliable chip control D32 and Walter Tools manufacturing quality for more productive milling cycles; order or consult Metav Werkzeuge for tailored recommendations and stocking options. P3204-D32 WHH15X Fräswendeschneidplatte – Coated carbide, chipbreaker D32 by Walter Tools The P3204-D32 WHH15X is an indexable milling insert engineered for productive metalcutting operations, offering a coated cemented carbide grade and a D32 chipbreaker for controlled chip formation. Coated cemented carbide grade WHH15X Chipbreaker D32 for consistent chip control Designed for productive milling operations Original Walter Tools manufacturing quality Increase throughput with stable chip control and repeatable cycles The P3204-D32 WHH15X insert is designed to deliver consistent chip evacuation and reduced cutting interruptions thanks to the chipbreaker D32 geometry and a coated cemented carbide substrate. In practice, this means fewer tool changes and less machine idle time during batch runs, which supports higher machining throughput. The coating on the cutting edges improves wear resistance under varied cutting conditions; when combined with the optimised chipformer, the result is more predictable tool life and more stable surface finishes on successive parts. These technical advantages translate directly into measurable productivity gains at the machine. Broad application potential with grade-based selection for process security The WHH15X designation denotes a coated carbide grade tailored for general milling tasks; specific workpiece suitability should be verified against the manufacturer's product matrix. The insert’s construction supports a range of cutting strategies, from roughing to semi-finishing, where stable cutting edges and reliable wear behaviour are essential. For shops with mixed material programmes, selecting the correct grade within the Walter series helps maintain process security and consistent part quality. Where exact material compatibility is critical, the product matrix clarifies performance for individual alloys and hardness ranges. Practical advantages for shop-floor integration and inventory planning As an indexable insert, this format simplifies handling and stocking while enabling fast edge changes that keep machines running. The combination of a recognised grade and a defined chipbreaker means procurement can be standardised across similar milling operations, reducing administrative complexity and supporting predictable spare-part planning. From a tooling management perspective, the Walter Tools provenance adds a level of assurance regarding batch consistency and grade identification, which eases repeatability in production schedules. Assistance for grade selection and application-specific setup is available through Metav Werkzeuge for those seeking alignment with existing processes. Contact Metav Werkzeuge for expert advice on Walter Tools WHH15X inserts and to discuss the best grade and setup for specific milling tasks Technical Data Article number: P3204-D32-WHH15X-WALTER SKU: P3204-D32-WHH15X-WALTER Label: Fräswendeschneidplatte P3204-D32 WHH15X Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core specifications Price (net): 104.76 Design and features Grade: WHH15X Coating: coated cemented carbide Chipbreaker: D32 Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig Story trigger: wendeplatten UID: P3204-D32-WHH15X-WALTER FAQ What materials is this insert intended for? The WHH15X grade is a coated carbide type recommended for general milling applications; specific material suitability for the P3204-D32 WHH15X should be checked in the manufacturer's product matrix. How does the D32 chipbreaker affect machining performance? The chipbreaker D32 promotes controlled chip formation and evacuation, which reduces interruptions and supports more consistent cycle times with the P3204-D32 WHH15X insert. Is this an original Walter Tools product? Yes, the P3204-D32 WHH15X is offered as an original Walter Tools indexable insert and is supplied with the grade and series designation as stated. Can the insert be used for roughing and finishing operations? The coated cemented carbide construction and chipbreaker design allow flexible use across roughing and semi-finishing strategies; selection for finishing should follow the product matrix and machining parameters. Where can technical guidance for application and grade selection be obtained? Application-specific recommendations and grade selection for the P3204-D32 WHH15X are available through Metav Werkzeuge’s technical advisers and the manufacturer’s documentation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com