P4841C-5R-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating and the WSP45G carbide grade for consistent edge stability and extended tool life in demanding drilling and reaming operations; order directly via Metav Werkzeuge or consult our team for application matching. P4841C-5R-E57 WSP45G – drilling/reaming indexable insert for Stahl, rostfreier Stahl and heat‑resistant alloys, Walter Tools The P4841C-5R-E57 WSP45G is a Tiger·tec Gold coated indexable insert engineered for high‑performance drilling and reaming across a wide range of materials, offering a balance of wear resistance and toughness for industrial machining. Tiger·tec Gold PVD coating Robust WSP45G coated carbide grade For Stahl, rostfreier Stahl and superalloys Stable cutting edge for long tool life Maximise throughput with a high‑performance coating The Tiger·tec Gold PVD coating and the WSP45G grade combine to deliver improved wear resistance and thermal stability under continuous cutting conditions. This surface treatment reduces adhesion and protects the cutting edge at elevated temperatures, which translates into fewer interruptions for tool changes and a more predictable production rhythm. For operations where cycle time and repeatability matter, the coated carbide offers a measurable advantage in maintaining process efficiency and reducing overall machining costs. Consistent results across demanding materials Designed for the ISO groups P, M and S, the insert performs reliably when machining Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. The substrate and coating pairing is tuned to handle the typical chip formation and heat generation of these materials, supporting stable chip control and minimising build‑up on the cutting edge. This makes the insert suitable for shops that require flexibility across mixed production runs without frequent grade changes. Process security and longer tool life for economic machining The combination of a robust grade and a defined chipbreaker (5R‑E57) supports controlled cutting forces and repeatable surface finishes, which improves process security and reduces scrap rates. The insert’s geometry and edge integrity contribute to extended service intervals and predictable performance, lowering tooling-related downtime. In production environments where reproducible quality and cost per hole are key metrics, this solution helps to achieve a favourable balance between performance and economy. For tailored recommendations on machining programmes or to specify the right Tiger·tec Gold WSP45G insert for an application, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability Technical data SKU: P4841C-5R-E57-WSP45G-WALTER Designation: P4841C-5R-E57 WSP45G Product type: drilling/reaming indexable insert Manufacturer: Walter Tools Facts Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 5R‑E57 Material classification: P / M / S Special features Coating: Tiger·tec Gold (PVD coated carbide) Material compatibility: Stahl; rostfreier Stahl; heat‑resistant superalloys and titanium Robust, stable cutting edge for extended life Versatile for mixed production and demanding applications FAQ What materials is this insert suitable for? The P4841C-5R-E57 WSP45G insert from Walter Tools is suited for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (ISO groups P, M, S), reflecting the WSP45G grade’s balance of toughness and wear resistance. How does the Tiger·tec Gold coating benefit drilling operations? Tiger·tec Gold on the WSP45G grade reduces adhesion and improves thermal resistance during drilling and reaming, so the P4841C-5R-E57 maintains a stable cutting edge and delivers more consistent hole quality over longer tool life. Which chipbreaker is integrated and what is its effect? The insert features the 5R‑E57 chipbreaker; together with the geometry of the P4841C-5R-E57 it supports controlled chip formation and reliable evacuation, which helps to reduce rework and improve cycle stability in Walter Tools drilling applications. Can the insert be used for mixed material batches in a single tool set? Yes, the WSP45G grade and the P4841C-5R-E57 geometry are designed for flexible use across Stahl, rostfreier Stahl and selected superalloys, enabling fewer tool changes for mixed production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is a leading manufacturer of precision cutting tools and is part of the global Sandvik group. Protected trademarks and trade names are the property of their respective owners and are used here for explanatory purposes only; there is no affiliation implied between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
P4841C-5R-E57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of uncoated carbide reliability, precise chip control, and seamless integration into drilling and boring cycles for consistent production results. Order the insert directly via Metav Werkzeuge or consult the team for application advice. P4841C-5R-E57 WXP40 — drill/reaming indexable insert by Walter Tools, chipbreaker 5R‑E57 P4841C-5R-E57 WXP40 is an indexable insert designed for drilling and reaming operations where the stability of chip formation and uncoated carbide performance are required across a variety of machining tasks. Uncoated carbide grade WXP40 Chipbreaker 5R‑E57 for controlled chips ISO designation P4841C-5R-E57 Suitable for drilling and reaming applications Improved cycle performance through consistent chip control The insert delivers stable chip formation thanks to the engineered chipbreaker 5R‑E57, which reduces the risk of clogging and improves evacuation in bore operations. As an uncoated carbide grade, the substrate provides predictable wear behaviour and straightforward regrinding options where applicable, supporting uninterrupted machining sequences and predictable tool-change intervals. This reliability translates into higher uptime and more consistent hole quality in production environments. Check material suitability and ensure the right process parameters Material compatibility must be verified according to the manufacturer’s product matrix before application; the WXP40 grade is an uncoated cemented carbide and its suitability depends on workpiece material and cutting data. The insert is optimised for drilling and boring operations, but cutting speeds, feeds and coolant strategy determine final results. Clarifying these parameters early reduces trial time and helps secure the desired surface finish and dimensional accuracy. Built for integration in standard drilling toolholders and repeatable results Belonging to Walter’s open-series grade, this insert is intended for standard drill and reamer tool systems and supports reproducible outcomes in series production. The design emphasises process stability and predictable tool life under consistent operating conditions, helping to streamline setup routines and reduce variability between batches. Where higher process security is required, pairing the right cutting data with this grade helps achieve reliable cycle times and consistent hole tolerances. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts, sample recommendations and cutting data — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number/SKU: P4841C-5R-E57-WXP40-WALTER Product designation: Bohr-/Aufbohrwendeschneidplatte P4841C-5R-E57 WXP40 Type: drill/reaming indexable insert Manufacturer: Walter Tools ISO designation: P4841C-5R-E57 WXP40 Facts Grade: WXP40 (uncoated carbide) Chipbreaker: 5R‑E57 Series: Walter Schneidstoffsorte - Serie offen Material information: catalogue-dependent Special features Application: drilling and reaming operations Stable chip formation through dedicated chipbreaker Designed for reproducible tool life in series production Workpiece suitability: verify via manufacturer product matrix FAQ What materials is the P4841C-5R-E57 WXP40 suited for? Material suitability depends on the specific workpiece and process; the P4841C-5R-E57 WXP40 is an uncoated carbide grade and material compatibility should be checked against Walter Tools’ product matrix prior to use. How does the 5R‑E57 chipbreaker affect machining? The 5R‑E57 chipbreaker on the insert promotes controlled chip formation and improved evacuation during drilling and reaming, reducing the risk of clogging and supporting consistent hole quality with the Walter Tools insert. Can the insert be reground or reused? As an uncoated carbide grade, grinding and reconditioning options depend on the geometry and wear pattern; consult Walter Tools’ recommendations for regrinding limits and restore procedures for this insert. Is the insert suitable for high-speed drilling? Cutting speed capability depends on workpiece material and machine setup; the WXP40 grade provides predictable wear behaviour, but cutting parameters should be validated against Walter Tools’ cutting data before high-speed application. What should be checked before integrating the insert into production? Verify the toolholder compatibility, confirm the chipbreaker 5R‑E57 orientation for effective evacuation, and consult the Walter Tools product matrix to confirm material suitability and recommended cutting parameters. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any connection with our company. The offered item is original, brand-new factory product.
P4841C-5R-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of reliable holemaking, Tiger‑tec Silver coating performance and a chipbreaker optimised for consistent chip formation to keep machining cycles productive. Order the insert directly via Metav Werkzeuge or consult the technical team for tailored process data. P4841C-5R-F57 WKP35S — drilling/boring indexable insert, Tiger‑tec Silver (Walter Tools) The P4841C-5R-F57 WKP35S is a coated carbide indexable insert from the Tiger‑tec Silver series, engineered for drilling and boring operations in steel and cast iron. Coated Tiger‑tec Silver grade WKP35S Designed for steel and cast iron machining Stable chip formation for consistent performance Suitable for drilling and boring operations Greater process reliability during holemaking The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers measurable improvements in process reliability. The advanced coating reduces flank wear and helps maintain a consistent cutting edge over longer cycles, which lowers the frequency of tool changes and supports uninterrupted production. For operations that demand repeatable hole quality, this coated carbide indexable insert offers predictable results and contributes directly to improved spindle utilisation and reduced rework. Optimised chip control for fewer interruptions The 5R‑F57 chipbreaker geometry is designed to produce short, manageable chips in both steel and cast iron, improving evacuation from the cutting zone and reducing the risk of built-up edge. Better chip control shortens cycle interruptions and minimises manual clearing, which in turn increases uptime. In practical terms, the geometry helps to maintain surface integrity of the bore and supports stable tool life under typical drilling and boring feeds and speeds. Broad applicability across P and K materials Engineered for the ISO material groups P and K, this insert covers a wide spectrum of common workshop materials: unalloyed and alloyed steel as well as cast iron. The grade and coating are matched to the thermal and abrasive conditions encountered when machining these groups, providing a balance between wear resistance and toughness. For jobs that switch between cast components and steel parts, the insert permits process standardisation with fewer tool variants to manage. Seamless integration into machining workflows As an indexable insert with the designation P4841C‑5R‑F57, it fits holders designed for this geometry and is straightforward to implement within existing tool assemblies. The Tiger‑tec Silver technology from Walter Tools is backed by consistent manufacturing standards, supporting predictable changeover times and repeatable performance. Combined with correct holder selection and process parameters, the insert contributes to efficient inventory management and reliable production planning. Contact Metav Werkzeuge for application-specific recommendations and to arrange supply of Walter Tools P4841C-5R-F57 WKP35S inserts tailored to machining requirements Technical data Article number: P4841C-5R-F57-WKP35S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte P4841C-5R-F57 WKP35S Walter Tools Manufacturer: Walter Tools Facts Grade: WKP35S Series: Tiger‑tec Silver Chipbreaker: 5R‑F57 Material groups: P / K (steel, cast iron) Special features Coated carbide insert Designed for drilling and boring Stable chip formation Indexable insert geometry P4841C‑5R‑F57 FAQ What materials is this insert suitable for? The P4841C‑5R‑F57 WKP35S insert is optimised for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the 5R‑F57 chipbreaker benefit machining? The 5R‑F57 geometry promotes short, controllable chips and improved evacuation, which reduces interruptions and helps maintain consistent bore quality with the WKP35S grade. Which series and coating does this grade use? This insert belongs to the Tiger‑tec Silver series and is a coated carbide grade, designed to balance wear resistance and toughness for holemaking tasks. Is the insert intended for drilling or boring? The cutting geometry and designation indicate suitability for both drilling and boring applications where the specified holder accepts the P4841C‑5R‑F57 geometry. Can this insert reduce tool changes and downtime? Yes, the combination of the WKP35S grade and Tiger‑tec Silver coating supports longer tool life and more stable cutting edges, which reduces the frequency of tool changes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not indicate any affiliation between our company and the trademark owners. The offered item is original, brand‑new production from the manufacturer.
P4841C-5R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust WSP45G carbide grade and the 5R‑F57 chipbreaker for dependable chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult our team for application advice. P4841C-5R-F57 WSP45G — drilling/boring indexable insert by Walter Tools (Tiger·tec Gold, 5R‑F57 chipbreaker) The P4841C-5R-F57 WSP45G is a drilling and boring indexable insert designed for demanding metalcutting applications, combining a PVD‑based Tiger·tec Gold coating with a chipbreaker optimised for stable swarf formation and consistent cycle times. Tiger·tec Gold PVD coating for performance For Stahl, rostfreier Stahl and heat‑resistant alloys Chipbreaker 5R‑F57 for controlled chip formation Coated carbide grade WSP45G for enhanced wear resistance Proven process reliability and longer tool life The combination of the Tiger·tec Gold coating and the WSP45G grade offers a clear production benefit: improved wear resistance leads to fewer tool changes and higher uptime. The PVD coating enhances thermal and abrasive resistance while the substrate maintains edge stability under interrupted cuts. For machining tasks where consistency matters, such as multi‑part production runs or high‑feed drilling cycles, this insert supports a steady machining rhythm and reduces unplanned downtime. The result is measurable productivity gains and lower overall tooling costs through extended component life. Versatile material capability for mixed production schedules Engineered for the ISO groups P / M / S, the insert covers a broad material range — from general-purpose Stahl through demanding, work‑hardening rostfreier Stahl to high‑temperature superalloys and titanium alloys. The 5R‑F57 chipbreaker is tuned for reliable swarf control across these groups, reducing the risk of built‑up edge and facilitating safer evacuation of chips from deep holes. This versatility makes the insert a practical choice for job shops and production lines that encounter varied workpiece materials, helping to streamline tooling inventories and reduce setup complexity. Practical handling and integration in machining cells As an indexable insert intended for drilling and boring heads, this item is compatible with common toolholder systems and is simple to change during planned maintenance intervals. The geometry balances edge strength and cutting action to permit stable feeds and depths of cut without excessive spindle loads. When used with appropriate coolant strategies and standard clamping practice, the insert supports repeatable hole quality and surface finish, translating technical capability into trustworthy shopfloor results and a predictable process window. Contact Metav Werkzeuge today to discuss the ideal setup for this Walter Tools indexable insert and how the Tiger·tec Gold WSP45G grade can improve your machining throughput — email info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance Technical data Article number: P4841C-5R-F57-WSP45G-WALTER SKU: P4841C-5R-F57-WSP45G-WALTER Product type: drilling/boring indexable insert Grade: WSP45G Series: Tiger·tec Gold Facts Applicable material groups: P / M / S Chipbreaker: 5R‑F57 Coating technology: PVD (Tiger·tec Gold) Material designation: coated carbide Special features Designed for stable chip formation Suited for unalloyed and alloyed Stahl Suited for rostfreier Stahl applications Intended for high thermal stress materials (superalloys/titanium) Robust edge stability for interrupted cuts FAQ What materials can this insert machine reliably? The insert is specified for machining groups P, M and S — that is, unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys and titanium — making the P4841C‑5R‑F57 WSP45G suitable for mixed production. What is the benefit of the Tiger·tec Gold coating on this insert? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and thermal stability, which extends the service life of the insert under demanding drilling and boring conditions. How does the 5R‑F57 chipbreaker affect machining? The 5R‑F57 chipbreaker controls chip shape and evacuation, reducing the likelihood of built‑up edge and supporting consistent hole quality during continuous or interrupted cuts. Is this insert compatible with standard drilling heads and toolholders? The insert is an indexable cutting insert designed for typical drilling and boring holders; appropriate seat and clamp geometries are required for secure mounting and repeatable performance. Can this grade handle interrupted cuts or heavy feed rates? Yes — the WSP45G grade, combined with the insert geometry, provides edge stability suitable for interrupted cuts and applications with elevated feed rates, improving productivity while maintaining tool life. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841C-5R-F57 WXP40 Wendeplatten - Walter Tools
Benefit from a robust, uncoated cemented‑carbide grade and the precisely matched 5R‑F57 chipbreaker for reliable holemaking and productive machining; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. P4841C-5R-F57 WXP40 drilling / boring indexable insert, uncoated cemented carbide — Walter Tools The P4841C-5R-F57 WXP40 is an indexable insert designed for drilling and boring applications where a durable, uncoated cemented‑carbide grade and a defined 5R‑F57 chipbreaker geometry support consistent chip control and machining stability. Uncoated cemented‑carbide grade WXP40 5R‑F57 chipbreaker geometry Designed for productive holemaking Precision and performance that reduce cycle time The insert combines an uncoated cemented‑carbide substrate with a dedicated chipbreaker to deliver stable chip formation and repeatable edge performance. In practice, this means fewer interruptions for chip clearance and more consistent cycle times across batch production. The specified 5R‑F57 geometry guides chips away from the cutting zone, which helps maintain surface quality and reduces the likelihood of rework. For planners and production engineers, the main benefit is increased throughput without requiring extensive parameter changes on existing machines. Predictable behaviour and straightforward integration Manufactured in the Walter Tools range, the cutting grade WXP40 is an uncoated grade optimised for general turning and holemaking tasks; the open-series designation indicates broad applicability. The insert is a direct fit for systems and toolholders that accept the P4841C‑style indexable geometry, enabling fast changeovers and low inventory complexity. Because the cutting material is uncoated, heat‑resistant machining strategies and proper cutting‑fluid selection are recommended to preserve edge life under higher cutting temperatures. The technical design supports process stability, making it suitable for mixed‑material shops where predictable tool life is valued. Application guidance and quality considerations Selection of this insert should follow the product matrix and material suitability checks supplied by Walter Tools: verify substrate compatibility and machining parameters for each workpiece material. The WXP40 grade offers a balance of wear resistance and toughness that can be advantageous in variable batch sizes and multi‑shift environments. When integrating into a production cell, monitor tool change intervals and surface finish targets to quantify the economic impact: the combination of WXP40 and the 5R‑F57 chipbreaker frequently yields improved productivity and reduced scrap rates compared with generic inserts. Contact Metav Werkzeuge today to confirm suitability for intended materials and to obtain application advice for the P4841C-5R-F57 WXP40 insert Technical data Article number: P4841C-5R-F57-WXP40-WALTER SKU: P4841C-5R-F57-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841C-5R-F57 WXP40 Walter Tools Facts Grade: WXP40 Chipbreaker: 5R‑F57 Coating: uncoated (cemented carbide) Special features Series: Walter Schneidstoffsorte - Serie offen Material note: Katalogabhängig Application note: Check the product matrix for workpiece suitability Brand: Walter Tools FAQ What materials is this insert intended for? The P4841C‑5R‑F57 WXP40 insert is supplied as an uncoated cemented‑carbide grade; suitability for specific materials should be checked in the Walter Tools product matrix to determine optimal feeds and speeds. How does the 5R‑F57 chipbreaker improve machining? The 5R‑F57 geometry promotes controlled chip formation and evacuation in drilling and boring operations, improving surface quality and reducing stoppages due to chip accumulation when the correct cutting data are applied. Is this insert compatible with standard P4841C toolholders? The insert follows the P4841C indexable geometry and is intended for use in toolholders and drilling systems designed for that designation; confirm holder compatibility before fitting. Does the uncoated nature of WXP40 affect tool life compared with coated grades? As an uncoated cemented‑carbide grade, WXP40 provides a trade‑off between toughness and wear resistance; in many scenarios it delivers reliable performance, but for applications with high thermal loads a coated grade may extend tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer.
P4841C-6R-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S grade and the 6R‑A57 chipbreaker for reliable performance in steel and cast iron machining; order directly via Metav Werkzeuge or contact our consultants for application advice. P4841C-6R-A57 WKP35S drilling/boring indexable insert — Tiger·tec Silver (Walter Tools) The P4841C-6R-A57 WKP35S is an indexable insert engineered for drilling and boring applications in steel and cast iron, delivering consistent chip control and extended tool life. Tiger·tec Silver coating extends tool life WKP35S grade for steel and cast iron machining 6R‑A57 chipbreaker for stable chip formation Suited for drilling and boring operations High-efficiency performance for demanding production The coating and substrate combination of this insert focuses on process reliability and productivity. The Tiger·tec Silver coating reduces flank wear and supports higher cutting parameters, while the WKP35S grade provides a wear-resistant, coated carbide substrate suitable for the thermal and abrasive conditions encountered when machining steel and cast iron. These properties translate into longer tool life and reduced tool changes, which helps to keep cycle times predictable and production costs down. Predictable chip control and surface quality The integrated 6R‑A57 chipbreaker is optimised to produce short, controllable chips when working with typical steels and cast irons. Stable chip formation reduces the risk of re-cutting and tool chatter, contributing to a consistent surface finish and fewer downstream corrective operations. For tool rooms and production shops aiming for steady, repeatable results, this geometry supports a smoother process window and simplified chip evacuation. Application guidance and material suitability The insert is specified for ISO material groups P (steel) and K (cast iron). In practice, that means the grade and geometry are tailored to cope with the heat generation and chip forms typical of unalloyed and alloyed steels, as well as the abrasive, often brittle chips of cast iron. The coated carbide composition offers a balanced combination of toughness and hardness, making the insert appropriate for roughing and medium finishing operations in these material classes. Process assurance and brand reliability From a production-management perspective, the combination of a coated carbide grade and a purpose-designed chipbreaker means fewer interruptions for tool changes and a higher degree of process security. Walter Tools’ engineering focus on stable cutting edges and consistent manufacturing contributes to reproducible tool performance. Operators benefit from predictable wear behaviour and improved uptime when this insert is matched to appropriate cutting parameters and machine rigidity. For process-stable drilling and boring with Tiger·tec Silver technology, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: P4841C-6R-A57-WKP35S-WALTER Designation: P4841C-6R-A57 WKP35S Product type: drilling/boring indexable insert Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: 6R‑A57 Manufacturer: Walter Tools Measured characteristics ISO material groups: P (steel), K (cast iron) Intended operations: drilling, boring Coating type: Tiger·tec Silver (coated carbide) Article code: P4841C-6R-A57 Special features Coated carbide substrate Optimised chip control geometry Designed for stable wear behaviour Suitable for production and serial machining FAQ What materials can this insert machine effectively? The P4841C-6R-A57 WKP35S insert is designed for ISO groups P and K, meaning it machines steel and cast iron effectively when used with appropriate cutting data. Which chipbreaker is fitted and what benefit does it provide? The insert uses the 6R‑A57 chipbreaker, which promotes stable, short chip formation and improved chip evacuation in drilling and boring operations. Is the WKP35S grade suitable for higher cutting speeds? WKP35S, with the Tiger·tec Silver coating, supports elevated cutting parameters compared with uncoated grades; selection of speeds should still consider machine rigidity and coolant strategy. Can this insert be used for finishing as well as roughing? The geometry is primarily optimised for drilling and boring with good chip control; it is suitable for roughing and certain medium finishing tasks depending on the specific application and cutting data. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating reduces flank wear and helps maintain a stable cutting edge, which extends tool life and contributes to consistent machining quality under typical steel and cast iron conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original factory-new product of the manufacturer.
P4841C-6R-A57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G grade and a controlled chipbreaker to maintain stable machining across steels, stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. P4841C-6R-A57 WSP45G — Drilling/boring indexable insert with Tiger·tec Gold coating by Walter Tools The P4841C-6R-A57 WSP45G is an indexable insert for drilling and boring applications, optimised for machining steels, stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for longer tool life WSP45G grade for versatile P / M / S applications 6R‑A57 chipbreaker for controlled chip formation Compatible ISO designation for standard tool assemblies Longer tool life through coated carbide technology The combination of the Tiger·tec Gold series and the WSP45G grade provides a coated carbide solution designed for sustained performance under thermally demanding cutting conditions. The PVD‑based coating reduces wear rates and improves resistance to flank and crater wear, which translates into longer tool life and more consistent cycle times. For production environments where predictable tool change intervals and minimised downtime are priorities, this insert offers a balance of hardness and edge stability that supports higher productivity without sacrificing component quality. Reliable chip control and safer machining The integrated chipbreaker 6R‑A57 is engineered to shape and segment chips effectively in drilling and reaming operations. Stable chip formation reduces the risk of built‑up edge and tool pull‑out, improving surface finish and reducing secondary operations. The chip control design also assists in evacuation of chips from the hole, helping to protect the cutting edge and the workpiece. In short, the insert’s geometry enhances process reliability and supports efficient, repeatable machining on a range of component geometries. Broad material capability for versatile workshop use Rated for materials in the ISO groups P / M / S, this grade is suitable for unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys and titanium‑based materials. The metallurgical balance of the cutting grade and the coating technology helps manage the differing heat conduction and adhesion behaviours of these material groups, enabling secure chip formation and edge retention. This makes the insert a practical choice for mixed‑material production runs where a single grade must deliver consistent results across variable workpiece alloys. Practical selection and process advice The ISO designation ensures straightforward identification and compatibility with matching tool holders and bodies that accept the P4841C family of inserts. When choosing cutting parameters, favour moderate feeds with coolant flow targeted into the cutting zone for stainless steels and superalloys to control temperature and chip evacuation. For steels, higher cutting speeds are possible thanks to the coating’s protective properties. For application‑specific recommendations and to confirm seat and clamping compatibility, consult the technical data sheet or discuss requirements with an applications engineer. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to confirm the best setup for production demands Technical data Article number: P4841C-6R-A57-WSP45G-WALTER Designation: P4841C-6R-A57 WSP45G Product type: Drilling/boring indexable insert Brand: Walter Tools Core specifications Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 6R‑A57 Material designation: P / M / S ISO designation: P4841C-6R-A57 WSP45G UID: P4841C-6R-A57-WSP45G-WALTER Materials & special features Coated carbide (PVD) technology Suitable for steel machining Suitable for stainless steel machining Suitable for heat‑resistant alloys and titanium Designed for drilling and boring indexable applications FAQ What materials can be machined with this insert? The insert is suitable for steels, stainless steels and heat‑resistant superalloys; the WSP45G grade is formulated to handle the thermal and mechanical demands of P / M / S materials. What does the Tiger·tec Gold series offer? Tiger·tec Gold denotes a PVD coating technology that enhances wear resistance and thermal stability, providing better tool life and process consistency with the P4841C‑6R‑A57 WSP45G insert. How does the 6R‑A57 chipbreaker affect performance? The 6R‑A57 chipbreaker promotes reliable chip segmentation and evacuation during drilling and boring, which improves surface finish and reduces the likelihood of built‑up edge on the cutting edge. Is the insert compatible with standard tool holders? The ISO designation P4841C‑6R‑A57 WSP45G corresponds to industry standard insert geometries; confirm holder compatibility with the tool body manufacturer or Metav Werkzeuge for exact seating and clamping details. How does this grade compare to other Walter grades for milling? WSP45G is a versatile PVD grade optimised for a broad range of milling and drilling tasks, offering a compromise of toughness and wear resistance where mixed‑material capability is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer, Walter Tools.
P4841C-6R-A57 WXP40 Wendeplatten - Walter Tools
The uncoated carbide grade WXP40 combined with the 6R-A57 chipbreaker delivers dependable chip control and contributes to economical machining. For availability or application advice, order directly via Metav Werkzeuge or consult the technical team for suitability checks against the product matrix. P4841C-6R-A57 WXP40 drill/bore insert – uncoated carbide with 6R-A57 chipbreaker | Walter Tools The P4841C-6R-A57 WXP40 is a drill/bore insert designed for precision material removal where reliable chip formation and predictable wear are priorities. *Uncoated carbide grade WXP40 *Chipbreaker 6R-A57 for reliable chip control *Design: drill/bore insert *Walter Tools open-series cutting grade Improved productivity through consistent chip control The integrated 6R-A57 chipbreaker optimises chip formation and evacuation, which stabilises the cutting process and reduces the risk of interruptions. A well-shaped chip former lowers the frequency of manual interventions at the machine, supporting smoother cycle times and reduced downtime. By controlling chip behaviour, the insert helps maintain the cutting edge geometry for longer periods, contributing to predictable tool life and steady part quality. Economical uncoated carbide for predictable performance Manufactured in the WXP40 grade, this insert is an uncoated carbide solution offering a balance between cost-effectiveness and wear resistance. Uncoated carbide provides straightforward edge behaviour and is often preferred where coating adhesion or thermal effects require careful management. The cutting-grade designation indicates a specific binder and carbide composition; therefore, material compatibility should be verified against the product matrix to ensure that the selected grade meets the demands of the intended workpiece materials. Clear identification and integration into tool systems The insert bears the ISO-style designation P4841C-6R-A57 WXP40, which identifies form, chipbreaker geometry and grade for rapid selection in production planning. This labelling simplifies inventory management and ensures the correct insert geometry is matched to holders and drilling systems. Manufactured to Walter Tools standards, the component supports consistent edge formation and repeatable results in serial production, making it a pragmatic choice when process reliability matters. For specification clarification or a suitability assessment for specific workpiece materials, contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: P4841C-6R-A57-WXP40-WALTER Designation: P4841C-6R-A57 WXP40 Type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Material: catalogue-dependent Core data Chipbreaker: 6R-A57 Grade: WXP40 Special features Cutting class: uncoated carbide Series: Walter cutting-grade series (open) Reference designation without grade: P4841C-6R-A57 UID: P4841C-6R-A57-WXP40-WALTER FAQ What material class is the insert manufactured in? The insert is supplied in the WXP40 cutting grade, which is an uncoated carbide class; specific workpiece suitability should be verified using the product matrix. Does the 6R-A57 chipbreaker suit heavy interrupted cuts? The 6R-A57 chipbreaker is designed to promote predictable chip formation and evacuation; its performance under interrupted-cut conditions depends on application parameters and should be evaluated in the process setup. How is the insert identified for ordering and stock management? Identification is by the ISO-style designation P4841C-6R-A57 WXP40 and SKU P4841C-6R-A57-WXP40-WALTER, which indicate geometry, chipbreaker and grade for straightforward ordering. Is the insert coated? No; the WXP40 grade for this insert is an uncoated carbide variant, chosen for its specific edge behaviour and wear characteristics. How to confirm if this insert suits a particular workpiece material? Material suitability must be checked against the product matrix referenced for the WXP40 grade; consult the technical documentation or request application guidance. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not imply any affiliation. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer; the brand Walter Tools is used for identification purposes only.
P4841C-6R-E57 WKP35S Wendeplatten - Walter Tools
Combine Tiger·tec Silver coating with the WKP35S grade and the 6R‑E57 chipbreaker for stable chip control and long edge life; order the insert directly via Metav Werkzeuge or ask our consultants for application support. P4841C-6R-E57 WKP35S – drill/boring indexable insert with Tiger·tec Silver coating by Walter Tools The P4841C-6R-E57 WKP35S is an indexable cutting insert engineered for drilling and bore-enlargement tasks, optimised for machining steel (P) and cast iron (K) where reliable chip control and consistent tool life are required. Tiger·tec Silver coating technology WKP35S coated carbide grade For steel (P) and cast iron (K) 6R‑E57 chipbreaker geometry High-performance coating and material combination for productive metalcutting The combination of Tiger·tec Silver coating and a coated carbide substrate delivers a balance of thermal resilience and wear resistance that supports productive machining in demanding applications. The grade WKP35S is formulated for the typical heat generation and chip formation encountered when machining steel and is also suitable for many cast-iron conditions. For non-specialists: a coated carbide insert features a hard substrate with a thin functional coating that reduces friction, improves heat management and extends the usable life of the cutting edge. This results in fewer tool changes and more consistent cycle times on the shop floor. Geometry and chip management for process stability The 6R‑E57 chipbreaker geometry is designed to shape and control swarf during drilling and bore enlargement, reducing the risk of long, troublesome chips and supporting smooth evacuation. Improved chip control lowers the likelihood of workpiece damage and helps maintain steady cutting forces, contributing to process stability and repeatable results. For production engineers, this means less downtime for clearing chips and a reduced incidence of edge deterioration caused by inconsistent chip flow. Production benefits: uptime, surface quality and repeatability Using an insert from the WKP35S family supports stable chip formation and reliable edge life, which together drive higher machine uptime and more predictable surface finishes. The optimised coating and geometry help achieve a consistent contact condition between tool and workpiece, aiding dimensional repeatability across batches. In practice, this translates to fewer reworks, reduced inspection overhead and a smoother production flow when machining components in steel and cast iron. Contact Metav Werkzeuge for application advice and to secure Walter Tools Tiger·tec Silver WKP35S inserts; consultation available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P4841C-6R-E57-WKP35S-WALTER ISO designation: P4841C-6R-E57 WKP35S Product type: drill/boring indexable insert Series: Tiger‑tec Silver Grade: WKP35S Core data Chipbreaker: 6R‑E57 Material groups: P / K (steel, cast iron) Applicable workpiece materials: steel; cast iron Special features Coated carbide insert Tiger·tec Silver coating technology Suitable for steel (P) and cast iron (K) Walter Tools brand FAQ What materials is the insert suitable for? The insert is specified for steel (P) and cast iron (K); the WKP35S grade and the Tiger·tec Silver coating are chosen to handle the heat and chip formation typical for these material groups. How does the 6R‑E57 chipbreaker affect machining? The 6R‑E57 chipbreaker improves chip control and evacuation during drilling and bore enlargement, which supports stable cutting forces and reduces the risk of surface damage from erratic swarf. Is this insert compatible with standard drill/boring holders? The P4841C‑6R‑E57 WKP35S indexable insert follows common ISO designation practices for its geometry; compatibility depends on the toolholder pocket for this ISO-type insert shape and size. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver coating offers improved thermal resistance and reduced friction, helping to extend edge life and maintain cutting performance in continuous or high-load operations. Can the WKP35S grade be used for mixed production of steel and cast iron? Yes—the WKP35S grade is formulated to perform across steel and cast iron applications, making it suitable for production environments that process both material groups. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original factory-new merchandise of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P4841C-6R-E57 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the versatile WSP45G grade for stable, repeatable drilling and boring results across steel, stainless steel and heat‑resistant alloys; order or request tailored cutting data via Metav Werkzeuge if required. P4841C-6R-E57 WSP45G drill/boring indexable insert – Tiger·tec Gold, coated carbide (Walter Tools) The P4841C-6R-E57 WSP45G is a coated carbide indexable insert designed for drilling and boring operations in steel, stainless steel and heat‑resistant alloys, offering reliable chip control with the 6R‑E57 chipbreaker. Tiger·tec Gold PVD coating WSP45G: versatile coated carbide grade For steel, stainless and superalloys 6R‑E57 chipbreaker for controlled chips Deliver consistent machining across mixed materials The combination of the Tiger·tec Gold PVD technology and the WSP45G grade provides a balance between wear resistance and toughness. As a coated carbide insert, it supports the thermal and mechanical stresses typical of machining P / M / S groups (steel, stainless steel and superalloys/titanium). The 6R‑E57 chipbreaker promotes predictable chip formation, which reduces the risk of chip-related interruptions and makes process planning more reliable. For production environments that run mixed batches, this reduces tool inventory while maintaining component quality. Maintain productivity with a stable cutting edge A stable cutting edge leads directly to fewer tool changes and more uptime. The PVD coating on this grade enhances surface hardness and abrasion resistance, helping to extend tool life under cyclic loads and heat. Controlled chip evacuation from the 6R‑E57 geometry reduces recutting and surface damage, resulting in improved first‑pass yields and less rework. In short, the insert is engineered to convert wear resistance into measurable productivity gains on both roughing and semi‑finishing cycles. Integrate quickly and achieve predictable results The insert is optimised for standard drilling and boring toolholders and can be introduced without major programme changes. The chipbreaker geometry is designed to function across a range of feeds and cutting speeds, so cycle times become more predictable and setup trials are shortened. For engineers familiar with coated carbide grades, the performance characteristics are straightforward: high cutting stability, consistent surface finish and repeatable dimensional control — all contributing to predictable output and easier process validation. Trusted series and practical application advice Walter Tools’ Tiger·tec Gold series is known for its combination of toughness and coating technology, making it a pragmatic choice where both edge stability and wear resistance matter. The insert’s versatility suits jobshops and production floors that require a single grade for multiple alloys. For application optimisation — such as recommended cutting speeds, feeds and coolant strategy — Metav Werkzeuge can provide cutting data and guidance to match machine capability and component tolerance requirements. For tailored cutting data and reliable supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the P4841C-6R-E57 WSP45G and its best use in specific applications. Technical data SKU: P4841C-6R-E57-WSP45G-WALTER Designation: P4841C-6R-E57 WSP45G Manufacturer: Walter Tools Product type: Drill/boring indexable insert Grade series: Tiger·tec Gold Sort: WSP45G Chipbreaker: 6R‑E57 Material group: P / M / S UID: P4841C-6R-E57-WSP45G-WALTER Facts Applicable materials: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Coating type: PVD (Tiger·tec Gold) Tool family: Coated carbide insert Special features Coating: Tiger·tec Gold (PVD) Material: Coated carbide Intended use: Drilling and boring operations Chip control: 6R‑E57 chipbreaker Series characteristics: Versatile PVD grade for mixed material use FAQ Which materials can be machined with this insert? The P4841C-6R-E57 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys (P / M / S groups) when used with appropriate cutting data. What does the WSP45G grade mean in practice? WSP45G denotes a Walter Tools PVD‑coated carbide grade optimised for toughness and wear resistance, offering reliable edge stability across a range of feeds and speeds. How does the 6R‑E57 chipbreaker affect machining? The 6R‑E57 geometry promotes controlled chip formation and evacuation, reducing recutting and improving surface finish for both roughing and semi‑finishing cycles. Is this insert suited to high‑temperature alloys like titanium? Yes; the grade is classified for the S group, meaning it is designed for heat‑resistant superalloys and titanium alloys with attention to edge stability under poor heat conduction. Can the insert be used with standard drill/boring toolholders? Yes; the insert is intended for standard drilling and boring applications and integrates into common indexable toolholder systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P4841C-6R-E57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective uncoated carbide performance, a 6R‑E57 chipbreaker geometry for stable chip control and the reliability of a Walter Tools production standard for dependable machining results; order directly via Metav Werkzeuge or ask the consultants for application support. P4841C-6R-E57 WXP40 – Drill/Boring indexable insert, uncoated carbide, 6R‑E57 chipbreaker (Walter Tools) A P4841C-6R-E57 WXP40 indexable insert designed for drilling and bore-enlargement tasks, offering an open-series, uncoated carbide grade for versatile general machining applications. Uncoated carbide grade WXP40 Engineered 6R‑E57 chipbreaker geometry Open series for broad workpiece compatibility Manufactured by Walter Tools Consistent productivity with uncoated carbide grade WXP40 The WXP40 grade is an uncoated carbide formulation intended for reliable cutting performance where coating is not required. This indexable insert delivers a balanced combination of toughness and wear resistance that supports consistent edge life in medium-duty drilling and boring operations. For production environments where predictable tool behaviour and straightforward reconditioning are priorities, the absence of a coating reduces sensitivity to thermal shocks and enables repeatable results when machining a variety of common engineering materials. The design supports steady material removal without unnecessary complexity. Controlled chip formation thanks to 6R‑E57 geometry The defining 6R‑E57 chipbreaker geometry is engineered to promote stable chip control during holemaking and bore-enlargement. By directing chip flow and breaking continuous swarf into manageable segments, this geometry reduces the risk of chip packing and improves surface finish in the machined bore. The geometry also helps maintain a stable cutting edge under fluctuating cutting parameters, which contributes to reduced cycle interruptions and lower scrap rates. The result is improved process reliability and easier handling in automated or manual tool-change scenarios. Practical selection and application guidance for workshop use Selection of the right grade and geometry should be guided by the workpiece material and the specific machining strategy; the open series designation indicates a broadly applicable product family, but suitability must be checked against the product matrix for demanding alloys or specialised materials. For typical drilling and bore-enlargement tasks, this insert provides an economical and technically sound option when an uncoated solution is preferred. Documentation and standard tooling data from Walter Tools can be consulted to match cutting parameters and holder interfaces, ensuring the insert integrates smoothly into existing tool setups. Quality assurance, handling and reconditioning considerations Produced by Walter Tools, the insert adheres to industry manufacturing standards and benefits from a clear specification that supports process repeatability. Handling and seat preparation of the toolholder influence performance: correct seating, clean clamping faces and adherence to recommended speeds and feeds extend operational life. When inserts show edge wear, straightforward inspection and replacement intervals simplify maintenance planning and contribute to predictable uptime in the production cycle. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to request detailed cutting parameter recommendations by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: P4841C-6R-E57-WXP40-WALTER Product type: Drill/Boring indexable insert Designation: P4841C-6R-E57 WXP40 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WXP40 Facts Chipbreaker: 6R‑E57 Coating: uncoated carbide Material specification: Katalogabhängig SKU: P4841C-6R-E57-WXP40-WALTER Special features Uncoated carbide grade for predictable behaviour Open series for versatile application Suitable for standard drilling and bore-enlargement operations Sorteneinsatz: check product matrix for specific workpiece suitability FAQ What materials is this insert intended for? The P4841C-6R-E57 WXP40 insert is an uncoated carbide grade intended for general engineering materials; specific suitability should be verified in the product matrix for specialised alloys. Does the 6R‑E57 geometry help prevent chip packing? Yes, the 6R‑E57 chipbreaker is designed to promote controlled chip formation and reduce the risk of chip packing during drilling and bore-enlargement. Is this insert part of an open series and what does that mean? The insert belongs to an open series, indicating a broadly applicable family; it is optimised for versatile use rather than a single narrow application. Can cutting parameters for the P4841C-6R-E57 WXP40 be provided? Cutting parameter recommendations are available from Walter Tools documentation; Metav Werkzeuge can supply tailored suggestions based on the specific machine and workpiece combination. How is tool life affected by the uncoated nature of the WXP40 grade? Uncoated grades like WXP40 offer predictable wear behaviour and improved resilience to thermal fluctuations; tool life will depend on material, speed, feed and operating conditions Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision cutting tools and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned exclusively for explanatory purposes and do not imply any affiliation between our company and the named manufacturers. The item offered is original and brand‑new from the manufacturer.
P4841C-6R-F57 WKP35S Wendeplatten - Walter Tools
Benefit from a combination of long tool life from the Tiger·tec Silver coating, precise chip control via the 6R‑F57 chipbreaker and reliable performance on both steel and cast iron for uninterrupted machining. Order directly via Metav Werkzeuge or consult the specialists for application advice. P4841C-6R-F57 WKP35S drilling/bore-enlargement indexable insert — Tiger·tec Silver grade, Walter Tools The P4841C-6R-F57 WKP35S is a drilling/bore-enlargement indexable insert engineered to deliver stable cutting results in mixed production environments, primarily for steel and cast iron machining. Tiger·tec Silver coating for robust edge life WKP35S grade for steel and cast-iron machining 6R‑F57 chipbreaker ensures controlled chip formation Increased productivity through extended edge life The coated carbide Tiger·tec Silver grade WKP35S is formulated to extend tool life under typical high-load drilling and bore-enlargement cycles. The coating reduces flank wear and thermal damage, which translates into fewer index changes and longer uninterrupted runs. By using a grade optimised for both steel (P) and cast iron (K), this insert supports mixed-series production where material changeovers occur, helping to maintain throughput and reduce downtime. Safer, more consistent chip control for efficient machining The 6R‑F57 chipbreaker geometry is designed to produce predictable, short chips during interrupted cuts and varying feed conditions. Controlled chip formation improves surface finish and reduces the risk of chip entanglement in the bore, which in turn lowers the chance of tool damage and machine stoppages. For operations where consistent part quality and cycle-time stability matter, the chip management provided by this geometry enhances process reliability and repeatability. Clear application scope and handling benefits Designed as a drilling/bore-enlargement indexable insert, the component is suitable for machining applications classified under ISO group P (steel) and K (cast iron). The insert’s geometry and grade combination make it particularly useful in production and contract machining where both materials are processed. As a coated carbide insert, it offers a balance of wear resistance and toughness, enabling productive cutting parameters without compromising edge integrity. Handling is simplified by standard insert indexing and proven seat interfaces, supporting fast changeovers and predictable tool life management. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss the best grade and geometry for specific steel or cast-iron applications. Technical Data Article number: P4841C-6R-F57-WKP35S-WALTER Type designation: P4841C-6R-F57 WKP35S Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 6R-F57 Tool type: drilling/bore-enlargement indexable insert Manufacturer: Walter Tools Facts Suitable materials: Steel (P), Cast iron (K) Coating type: Tiger·tec Silver (coated carbide) Product family: Tiger·tec Silver series Special features Coated carbide grade for improved wear resistance Geometry optimised for controlled chip breaking Application focus: drilling and bore enlargement FAQ What materials is this insert suitable for? The P4841C-6R-F57 WKP35S insert is suitable for steel (ISO group P) and cast iron (ISO group K), reflecting the WKP35S grade and Tiger·tec Silver coating characteristics. How does the 6R‑F57 chipbreaker improve performance? The 6R‑F57 chipbreaker on the insert promotes short, controllable chips during interrupted and continuous drilling, enhancing surface finish and reducing the risk of chip-related interruptions. Is this insert compatible with standard drilling tool holders? The P4841C-6R-F57 WKP35S is designed for typical indexable insert interfaces used in drilling/bore-enlargement applications; compatibility should be confirmed with the tool holder manufacturer or Metav Werkzeuge specialists. What benefits does the Tiger·tec Silver series provide in practice? Tiger·tec Silver provides a combination of thermal resistance and wear control, extending edge life and maintaining dimensional stability under production conditions, which benefits operational efficiency and cost-effectiveness. Where can one get application support or more technical data? Metav Werkzeuge can provide further technical details and application advice for the P4841C-6R-F57 WKP35S insert, including recommended cutting parameters and workpiece-specific strategies. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand representation: Walter Tools) is part of the Sandvik group and is known for precision cutting tools and global service. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
P4841C-6R-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for durable cutting performance, combining reliable chip control from the 6R‑F57 chipbreaker with broad material capability for efficient production. Request technical advice or place the order directly via Metav Werkzeuge for a seamless supply chain. P4841C-6R-F57 WSP45G — Drilling/reaming indexable insert with Tiger·tec Gold coating (Walter Tools) P4841C-6R-F57 WSP45G is a drilling/reaming indexable insert designed to provide stable cutting performance in mixed-production environments where steels, stainless steels and heat-resistant alloys are machined Tiger·tec Gold PVD coating for high wear resistance Optimised 6R‑F57 chipbreaker for consistent chips Suitable for steel, stainless steel and superalloys Extended life from advanced coating and grade The combination of the Tiger·tec Gold PVD coating with the WSP45G coated carbide grade yields enhanced wear resistance and a stable cutting edge under cyclic thermal and mechanical loads. This engineered coating reduces adhesion and flank wear, thereby prolonging tool life and reducing tooling changes. For manufacturing setups that require predictable tool change intervals, the use of a high-performance coated grade delivers measurable gains in uptime and process reliability. Consistent chip control and improved process stability The 6R‑F57 chipbreaker is optimised to produce controlled chip forms during drilling and reaming operations, supporting smooth evacuation and reduced risk of chip entanglement. Stable chip formation leads to lower cutting forces and improved dimensional repeatability on the workpiece surface. Where constant productivity and surface quality are essential, the insert’s geometry supports reliable machining across variable batch sizes and component families. Versatile application guidance for production use Marked for material groups P / M / S, the insert is suited to machining unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The designation P4841C‑6R‑F57 WSP45G identifies the specific geometry and chipbreaker combination, enabling straightforward replacement and stock management. For parameter selection and optimisation in a particular machine setup, consult the technical database or our in‑house specialists for cutting data adapted to spindle speed, feed and coolant strategy. If further technical information or suitability checks are required, Metav Werkzeuge can provide tailored support by email or phone. For targeted performance with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for cutting data, availability and order placement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P4841C-6R-F57-WSP45G-WALTER Designation: P4841C-6R-F57 WSP45G Product type: Drilling/reaming indexable insert Manufacturer: Walter Tools Measurements & codes SKU: P4841C-6R-F57-WSP45G-WALTER Series: Tiger·tec Gold Grade: WSP45G Special features Coating: Tiger·tec Gold (PVD) Chipbreaker: 6R‑F57 Material compatibility: P / M / S Material_wpl: P / M / S Product family: Tiger‑tec Gold inserts FAQ What materials can this insert machine? The P4841C‑6R‑F57 WSP45G insert is specified for P / M / S groups, meaning it is suitable for machining steel, stainless steel and heat‑resistant superalloys/titanium. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSP45G grade improves wear resistance and edge stability, which helps extend tool life and maintain consistent part quality over longer cycles. What is the role of the 6R‑F57 chipbreaker? The 6R‑F57 chipbreaker is designed for controlled chip formation during drilling and reaming tasks, supporting efficient chip evacuation and stable cutting conditions. Is this insert compatible with automated tool changers? The insert designation and geometry are compatible with standard indexable insert holders used for drilling and reaming operations; confirm holder compatibility with the machine tool supplier. Where can cutting data and speeds be obtained? Cutting data tailored to specific machines and materials are available from Metav Werkzeuge or the manufacturer’s technical literature for the P4841C‑6R‑F57 WSP45G insert. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841C-6R-F57 WXP40 Wendeplatten - Walter Tools
Benefit from the combination of economical uncoated carbide, precise 6R‑F57 chip control and straightforward integration into Walter tool systems for dependable drilling and reaming cycles. Order the P4841C-6R-F57 WXP40 insert directly via Metav Werkzeuge or ask our consultants for application guidance. P4841C-6R-F57 WXP40 — Drill/Reaming Indexable Insert by Walter Tools A robust P4841C-6R-F57 WXP40 insert designed for drilling and reaming operations, offering stable chip formation and consistent edge performance in general machining applications. Uncoated carbide grade WXP40 6R-F57 chipbreaker for stable chips Drill and reaming applications Compatible with Walter tool series Consistent chip control for reliable cycles The P4841C-6R-F57 WXP40 is configured around the 6R‑F57 chipbreaker, a geometry engineered to produce predictable, short chips that enhance evacuation and reduce the risk of built-up edge. Combined with the WXP40 uncoated carbide grade, this configuration supports steady cutting forces and consequently more reproducible cycle times. Improved chip control directly reduces interruptions for manual chip clearing, which in turn helps maintain spindle load stability and keeps machining processes running smoothly with fewer operator interventions. Lower process variation and streamlined tool handling As an indexable insert, the design enables fast corner changes and cost-effective replacement of the cutting edge rather than the whole tool body, supporting higher machine uptime and easier inventory management. The uncoated carbide core provides a neutral base grade that can suit a range of general applications when matched correctly; because the grade is catalog-dependent for specific demands, it is important to consult the product matrix for exact performance data. Where appropriate, the combination of a predictable chipbreaker and a robust carbide substrate will result in a lower total cost of ownership through reduced tool change frequency and consistent surface quality. Practical guidance for application and selection This insert is intended for drilling and reaming tasks within the Walter tool family; its indexable format simplifies integration into existing toolholders and reduces setup time. While the insert offers stable performance characteristics, material suitability must be verified against the manufacturer's product matrix to ensure optimal results for specific workpiece materials. For operations requiring special coatings or very high cutting speeds, alternative grades or surface treatments may be preferable. Specifying the correct chip geometry and grade at the planning stage ensures reproducible results and minimises trial cuts on critical components. Contact Metav Werkzeuge today for tailored advice on Walter Tools P4841C-6R-F57 WXP40 inserts and to verify suitability for specific machining tasks; our consultants are available to support selection and application decisions. Technical Data Article number: P4841C-6R-F57-WXP40-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841C-6R-F57 WXP40 Walter Tools Manufacturer: Walter Tools Type: Drill/reaming indexable insert Grade: WXP40 Chipbreaker: 6R-F57 Series: Walter Schneidstoffsorte - Serie offen ISO designation: P4841C-6R-F57 WXP40 Base designation: P4841C-6R-F57 Material: catalog-dependent Internal ID: P4841C-6R-F57-WXP40-WALTER Facts Chipbreaker designation: 6R-F57 Grade type: uncoated carbide (WXP40) Intended use: drilling and reaming Format: indexable insert ISO name: P4841C-6R-F57 WXP40 Special features Uncoated carbide grade for broad applicability Designed for stable chip formation and evacuation Quick insert change for reduced downtime Compatible with Walter tool systems Sorteneinsatz / meaning: check product matrix for exact workpiece suitability FAQ What materials is the P4841C-6R-F57 WXP40 suitable for? Material suitability depends on the specific product matrix; the P4841C-6R-F57 WXP40 is an uncoated carbide grade and should be matched to the workpiece material using the manufacturer's data to ensure optimal cutting parameters. How does the 6R‑F57 chipbreaker affect machining? The 6R‑F57 chipbreaker promotes predictable, shorter chips and improved evacuation, which stabilises cutting forces and helps maintain consistent machining cycles with fewer stoppages for chip clearing. Can the insert be used in existing Walter drill bodies? The insert is shaped and designated for Walter tooling families; compatibility with a given drill body should be confirmed against the holder and tool system specifications to ensure correct seating and clamping. Is the WXP40 grade coated or uncoated? WXP40 is specified as an uncoated carbide grade in the product series description, offering a neutral baseline for general applications while alternative coated grades may be available for specialised conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
P4841C-7R-A57 WKP35S Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Silver coating and the WKP35S grade together with the 7R‑A57 chipbreaker ensures stable chip control, long tool life and consistent machining results on steel and cast iron — order directly via Metav Werkzeuge or contact our consultants for application advice. Boring/Enlarging Indexable Insert P4841C-7R-A57 WKP35S — Tiger‑tec Silver (Walter Tools) The P4841C-7R-A57 WKP35S is a precision indexable insert engineered for boring and enlarging operations, optimised for machining steel and cast iron in industrial production environments Tiger‑tec Silver coating for extended life Optimised 7R‑A57 chipbreaker for stable chips Suited to steel and cast iron machining Indexable design for predictable tool changes Greater productivity through predictable wear and chip control The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers measurable improvements in tool life and process stability. The advanced coating reduces abrasive and adhesive wear while the substrate maintains cutting-edge toughness; together these characteristics lead to fewer unplanned tool changes and a steadier surface finish. As a result, cycle times and scrap rates fall, contributing to a lower cost per part and more consistent throughput on the shop floor. Reliable performance on steel and cast iron with clear application logic Designed according to the ISO material groups, the insert is coded P / K, which means it is purpose-built for steel (P) and cast iron (K) applications. For steel this grade copes with the typical heat generation and continuous chip formation, while for cast iron the geometry and coating resist abrasive wear and handle short, breaking chips. This dual suitability reduces tool inventory and simplifies tooling decisions for mixed-production environments. Practical handling and toolroom benefits that save time The insert’s indexable format and the 7R‑A57 chipbreaker geometry make tool changes quick and repeatable, supporting stable chip evacuation and reduced rework. The ISO designation and clear part coding ease spare-part management and integration into existing holders; the result is less downtime during changeovers and a faster return to full production. Backed by Walter Tools’ established manufacturing quality, the insert supports long-term reproducibility and predictable productivity. Contact Metav Werkzeuge today for a tailored recommendation on using the Walter Tools P4841C-7R-A57 WKP35S in current setups; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for expert application support Technical data SKU: P4841C-7R-A57-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841C-7R-A57 WKP35S Walter Tools Product type: Boring/Enlarging indexable insert Brand: Walter Tools Grade: WKP35S Series: Tiger‑tec Silver Chipbreaker: 7R‑A57 Material designation: P / K ISO designation: P4841C-7R-A57 WKP35S UID: P4841C-7R-A57-WKP35S-WALTER Facts Geometry code: 7R‑A57 Article designation: P4841C-7R-A57 WKP35S SKU code: P4841C-7R-A57-WKP35S-WALTER Special features Coating: Tiger‑tec Silver (coated carbide) Suitable for: Steel (P), Cast iron (K) Product form: Indexable insert for boring/enlarging Grade characteristics: wear-resistant, process-stable Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert is specified for steel (ISO group P) and cast iron (ISO group K); the WKP35S grade and Tiger‑tec Silver coating are tuned to those material behaviours. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating improves resistance to abrasive and adhesive wear, extending tool life and stabilising cutting conditions, which helps the WKP35S grade deliver consistent results over longer tool lives. Is the geometry 7R‑A57 important for chip control? Yes, the 7R‑A57 chipbreaker is designed to shape and break chips reliably during boring and enlarging, promoting efficient evacuation and reducing the risk of chip-related surface defects. Which product designation helps ordering the correct insert? Refer to the ISO designation P4841C-7R-A57 WKP35S or SKU P4841C-7R-A57-WKP35S-WALTER to ensure compatibility with the intended holder and application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer Walter Tools.
P4841C-7R-A57 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade to extend tool life and maintain process stability in drilling and boring operations; order the insert directly via Metav Werkzeuge or consult our technical team for application support. P4841C-7R-A57 WSP45G indexable insert for drilling and boring – Tiger·tec Gold by Walter Tools The P4841C-7R-A57 WSP45G is an indexable insert for drilling and boring applications, designed for robust performance in machining Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. Tiger·tec Gold coating for extended tool life Versatile P/M/S material compatibility Stable cutting edge under high thermal load Optimised chip control for drilling and boring Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WSP45G grade provides a clear advantage where edge stability and wear resistance matter. The PVD-coated carbide substrate resists abrasion and adhesion wear, which translates into fewer indexings and longer intervals between tool changes. For production environments this means higher uptime and lower handling costs per hole. The insert’s coating technology also supports higher cutting temperatures, so feeds and speeds can be exploited more effectively without premature wear. Reliable machining across challenging materials Engineered for the P/M/S groups (Stahl, rostfreier Stahl and heat-resistant superalloys/titanium), the geometry and material composition of the insert support consistent performance when thermal loads and material toughness vary. The specified 7R-A57 chipbreaker forms predictable chips during drilling and boring, reducing the risk of built-up edge and improving surface integrity of the workpiece. As a result, process reliability increases even on components that require repeatable dimensional accuracy. Predictable chip control and process stability Chip formation is a core contributor to safe, efficient drilling. The 7R-A57 chipbreaker is tuned to evacuate chips cleanly under typical coolant conditions used in industrial drilling, helping to prevent recutting and tool pressure spikes. Stable chip flow also reduces cycle-time variability and minimises the chance of workpiece damage. Where coolant access is limited, the insert’s geometry maintains acceptable chip control, aiding in continuous production and easier downstream handling. Practical benefits for workshop and production use For machining operations that prioritise productivity, this insert offers straightforward integration: compatible tool bodies and standard clamping procedures apply, and the coated carbide grade supports a balance between toughness and wear resistance suitable for both roughing and finishing passes in drilling and boring sequences. Selecting this insert can lead to measurable reductions in tool consumption and improved component quality, particularly where repeatability and surface finish are essential. Contact Metav Werkzeuge for tailored application advice and availability — Metav Werkzeuge provides technical consultation by email or phone and can advise on suitable tool holders and cutting data Technical Data Article number: P4841C-7R-A57-WSP45G-WALTER SKU: P4841C-7R-A57-WSP45G-WALTER Product: Bohr-/Aufbohrwendeschneidplatte (indexable insert for drilling/boring) Brand: Walter Tools Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 7R-A57 Material groups: P / M / S Identifier: P4841C-7R-A57 ISO designation: P4841C-7R-A57 WSP45G UID: P4841C-7R-A57-WSP45G-WALTER Facts Coating type: Tiger·tec Gold Material of insert: coated carbide (PVD) Suitable for: Stahl; rostfreier Stahl; heat-resistant superalloys and titanium Intended use: drilling and boring operations Special features PVD-coated Tiger·tec Gold technology WSP45G grade for toughness and wear resistance 7R-A57 chipbreaker for controlled chips Designed by Walter Tools for industrial production FAQ What materials are suitable for this insert? The P4841C-7R-A57 WSP45G insert is specified for the P/M/S groups, meaning Stahl, rostfreier Stahl and heat-resistant superalloys or titanium, offering balanced performance across those materials. How does the Tiger·tec Gold coating benefit drilling operations? The Tiger·tec Gold coating on the WSP45G grade increases wear resistance and thermal stability, which helps the insert retain a stable cutting edge during extended drilling cycles. Which chipbreaker is supplied with the insert and why does it matter? The insert uses the 7R-A57 chipbreaker, designed to produce predictable chips and improve evacuation during drilling and boring, reducing the risk of built-up edge and workpiece damage. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
P4841C-7R-A57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of uncoated carbide reliability and a defined 7R‑A57 chipbreaker for consistent chip control in drilling and bore-enlarging operations; order via Metav Werkzeuge or consult the specialists for application-specific selection. P4841C-7R-A57 WXP40 — Drilling/boring indexable insert, uncoated carbide, 7R‑A57 (Walter Tools) The P4841C-7R-A57 WXP40 is an indexable insert designed for drilling and bore-enlarging applications, offering a defined chipbreaker and an uncoated cemented-carbide grade for predictable machining behaviour. Uncoated carbide grade WXP40 7R‑A57 chipbreaker for controlled chips Indexable insert for drilling and boring Walter Tools quality and consistency Stable chip control that keeps cycles predictable The insert is supplied in the WXP40 cemented-carbide class, which is specified as an uncoated hardmetal in Walter’s open series. The integrated 7R‑A57 chipbreaker is intended to produce manageable chips under recommended conditions, so the machining process is stabilised and tool-change interruptions can be reduced. Where cutting-edge tolerances are required, the controlled chip formation contributes to consistent hole geometry and less variability in subsequent finishing steps. Material suitability must be verified in the product matrix to ensure the expected chip behaviour under the actual machining parameters. Productivity benefits from a straightforward cutting grade Because the grade is uncoated, the wear behaviour is predictable and machining cycles can be planned around a consistent life expectancy. The open-series composition provides an economic option where coated grades are not necessary or where reconditioning strategies are in place. The result is a cost-effective balance between performance and serviceability: predictable wear leads to fewer unscheduled stops, and stocking requirements are simplified by a widely applicable grade concept. For process engineers seeking to optimise cycle times, the insert can be evaluated as part of a toolset aimed at productive machining. Selection guidance and practical application notes Selection and application are supported by the manufacturer's series information: the cutting-grade assignment and the precise workpiece suitability must be checked against the published product matrix. If the workpiece material, spindle speed or feed per revolution differ from standard recommendations, a cross-check is required before series use. For procurement and process planning, identification is simplified by the ISO-style designation P4841C-7R-A57 WXP40, which clarifies geometry, chipbreaker and grade at a glance. For further specification details or assistance with grade matching, Metav Werkzeuge provides technical consultation and can supply the relevant matrices. For tailored application advice and availability of the P4841C-7R-A57 WXP40 indexable insert from Walter Tools, please contact Metav Werkzeuge for precise recommendations and delivery information: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: P4841C-7R-A57-WXP40-WALTER Type: Drilling/boring indexable insert Designation: P4841C-7R-A57 WXP40 Grade: WXP40 Chipbreaker: 7R-A57 Material: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Manufacturer: Walter Tools Core data No numerical core data provided in the source Design / Special features Uncoated cemented carbide (hardmetal) Open series grade description Defined chipbreaker for controlled chips ISO-style designation for easy identification Product-matrix-based material suitability – check before use FAQ What cutting grade is used in this insert and what does it mean? The P4841C-7R-A57 WXP40 insert uses the uncoated cemented-carbide grade WXP40, which is part of Walter’s open series; this denotes an uncoated hardmetal with predictable wear characteristics and requires consultation of the product matrix for material-specific recommendations. Which chip control can be expected from the insert? The integrated 7R‑A57 chipbreaker is designed to generate controlled chip formation during drilling and bore-enlarging operations when cutting parameters align with the manufacturer’s guidance. Is this insert suitable for all workpiece materials? Workpiece suitability is not universal; the P4841C-7R-A57 WXP40 insert’s compatibility must be verified in the product matrix to determine the correct application for specific materials and hardness ranges. How is the insert identified for procurement and tool lists? Identification is simplified by the ISO-style designation P4841C-7R-A57 WXP40, which indicates geometry, chipbreaker and grade for straightforward stocking and replacement. Can the insert be used in reconditioning strategies? As an uncoated grade, the insert presents predictable wear patterns that may be favourable for reconditioning programmes; process planners should assess regrinding and life-cycle procedures in conjunction with the product matrix. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841C-7R-E57 WKP35S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the WKP35S grade for extended tool life and consistent surface quality. The 7R-E57 chipbreaker supports stable chip control in demanding drilling and boring cycles. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. P4841C-7R-E57 WKP35S drilling/boring indexable insert for steel and cast iron — Walter Tools P4841C-7R-E57 WKP35S is an indexable insert engineered for productive drilling and boring operations in industrial machining, with a focus on robust performance in steel and cast iron applications. Tiger·tec Silver coating for durability Optimised for steel and cast iron 7R-E57 chipbreaker for stable chips Coated carbide grade WKP35S Sustained productivity with advanced coating The combination of the Tiger·tec Silver coating and the WKP35S grade provides reliable wear resistance and consistent cutting-edge performance across extended tool life. The coated carbide substrate reduces abrasive wear and corrosion of the cutting edge, which translates into fewer tool changes and steadier cycle times. This results in measurable improvements in production uptime and contributes to predictable process windows during medium- to high-duty drilling and boring sequences. Reliable chip control to keep cycles running The integrated 7R-E57 chipbreaker is designed to shape chips favourably during interrupted and continuous cuts, ensuring stable chip control and safe evacuation from the cutting zone. Improved chip formation reduces the risk of recutting, helps maintain surface integrity and lowers the likelihood of tool damage. For machining centres where consistent part finish and reduced rework rates are priorities, this geometry supports uninterrupted cycles and predictable machining results. Clear suitability for steel and cast iron machining The insert is optimised for ISO groups P (steel) and K (cast iron): P denotes suitability for unalloyed and alloyed steels with typical heat generation and continuous chips, while K indicates adaptability to abrasive cast-iron chips that tend to break more readily. This targeted design enables dependable performance across a wide workpiece spectrum without compromising on surface quality or tool life. The material assignment simplifies tooling decisions in mixed-production environments. Shop-floor benefits and process integration As a drilling/boring indexable insert from Walter Tools, the component is intended for straightforward integration into established toolholders and machining sequences. Its design promotes consistent gripping and repeatable positioning, which supports tool-change efficiency and traceable quality in serial production. For customers seeking to validate cutting parameters or adapt the insert to specific setups, Metav Werkzeuge provides application guidance to align cutting data with machine capability and workpiece characteristics. For tailored advice on integrating the Walter Tools P4841C-7R-E57 WKP35S insert into specific machining processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultancy and selection support Technical Data SKU: P4841C-7R-E57-WKP35S-WALTER Article: Bohr-/Aufbohrwendeschneidplatte P4841C-7R-E57 WKP35S Walter Tools Product type: Drilling/boring indexable insert Series: Tiger-tec Silver Grade: WKP35S Geometry / chipbreaker: 7R-E57 Material of insert: Coated carbide Material applications: Steel (P), Cast iron (K) Manufacturer: Walter Tools UID: P4841C-7R-E57-WKP35S-WALTER Key figures No numerical data specified in the provided product information Special features Tiger·tec Silver coating Coated carbide grade WKP35S Optimised for steel (P) and cast iron (K) 7R-E57 chipbreaker for controlled chips Intended for drilling and boring applications Walter Tools brand and series Tiger-tec Silver FAQ What materials is this insert suitable for? The P4841C-7R-E57 WKP35S insert is optimised for P (steel) and K (cast iron) workpiece groups, offering balanced performance for both continuous and interrupted cutting conditions. What is the main benefit of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, extending edge life and improving consistency in surface finish over prolonged cycles. How does the 7R-E57 chipbreaker affect machining? The 7R-E57 chipbreaker produces controlled chip shapes that evacuate reliably, reducing recutting and helping to maintain a stable process in drilling and boring operations. Is this insert suitable for high-speed applications? The coated carbide composition and Tiger·tec Silver technology favour elevated cutting performance; final suitability for high-speed regimes depends on machine rigidity and specific cutting parameters. Can the insert improve process repeatability in serial production? Yes, the insert’s geometry and coated grade support consistent cutting behaviour and repeatable tool changes, which contributes to traceable quality in series machining. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
P4841C-7R-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the versatile WSP45G grade for reliable chip control and extended tool life; order directly via Metav Werkzeuge or consult the technical team for process optimisation. P4841C-7R-E57 WSP45G — drilling/boring indexable insert, Tiger·tec Gold, Walter Tools A P4841C-7R-E57 WSP45G indexable insert designed for drilling and boring operations across steel, stainless steel and high-temperature alloys Tiger·tec Gold coating for extended tool life Suitable for steel, stainless and superalloys 7R‑E57 chipbreaker for consistent chip control Coated carbide grade WSP45G for versatile machining Maximised process stability and uptime with optimised wear resistance The combination of the Tiger·tec Gold coating and the WSP45G grade provides pronounced wear resistance and a stable cutting edge, resulting in longer tool life and fewer interruptions in production. As a coated carbide insert for drilling and boring, the design reduces flank wear and maintains dimensional stability over longer series runs. This leads to measurable gains in throughput and reduced tool consumption for operations requiring repeatable, high-volume machining. Consistent chip control reduces cycle variability The integrated 7R‑E57 chipbreaker is engineered to produce predictable chip forms when machining steel, stainless steel and superalloys, improving evacuation and reducing the risk of recutting. Controlled chip flow directly supports consistent surface quality and lowers the frequency of tool changes and part rework. In process terms, improved chip control translates into fewer stoppages and a steadier cycle time, which supports higher overall equipment effectiveness (OEE). One grade for multiple materials lowers inventory and simplifies setup The WSP45G grade covers ISO groups P, M and S, making the insert suitable for unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys and titanium. Using a single, versatile grade across these material groups reduces the number of tool variants kept in stock and shortens changeover planning. For shops handling mixed production runs, this versatility supports faster response to varying orders while keeping procurement and storage costs down. Easy integration into machining cells and documented performance advantages The insert is supplied with a clear ISO-type designation and a dedicated chipbreaker geometry, enabling straightforward integration into existing drilling and boring toolholders. Performance benefits such as improved surface integrity and reduced tool wear are documented characteristics of the coated grade and the chipbreaker geometry. For complex or high-value components the documented stability contributes to predictable process windows and simplified machining parameter selection. Technical advice and detailed cutting data are available from Metav Werkzeuge to support parameter optimisation. Discuss process optimisation with Metav Werkzeuge and request technical consultation on the Walter Tools P4841C-7R-E57 WSP45G insert to align the grade and chipbreaker with specific production requirements—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P4841C-7R-E57-WSP45G-WALTER Product: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: 7R‑E57 Manufacturer: Walter Tools Facts Price (net): €19.98 Materials & features Material suitability: steel (P), stainless steel (M), superalloys / titanium (S) Coating: Tiger·tec Gold (coated carbide) Material composition: coated carbide Typical application: drilling and boring ISO designation: P4841C-7R-E57 WSP45G FAQ What materials is this insert suitable for? This insert is specified for steel, stainless steel and superalloys/titanium; the WSP45G grade covers ISO groups P, M and S for broad applicability. How does the 7R‑E57 chipbreaker affect machining? The 7R‑E57 chipbreaker produces controlled chip forms that improve evacuation and reduce interruptions, enabling steadier cycles with the P4841C-7R-E57 WSP45G insert. What are the benefits of the Tiger·tec Gold coating? The Tiger·tec Gold coating increases wear resistance and thermal stability, contributing to longer life and consistent edge retention under drilling and boring loads. Can the WSP45G grade handle both drilling and boring operations? Yes, the WSP45G coated carbide grade is engineered for versatile use in drilling and boring contexts where consistent edge stability and chip control are required. What does the ISO designation P4841C-7R-E57 WSP45G indicate? The designation identifies the insert geometry (P4841C-7R-E57) combined with the grade WSP45G, clarifying the chipbreaker, series and coating for correct application. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
P4841C-7R-E57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, robust uncoated carbide grade WXP40 and a dedicated 7R-E57 chipbreaker to maintain consistent productivity in drilling and boring operations; order or request advice via Metav Werkzeuge for a reliable supply and application support. P4841C-7R-E57 WXP40 Drilling/Boring indexable insert by Walter Tools — uncoated carbide, chipbreaker 7R-E57 P4841C-7R-E57 WXP40 is an indexable insert developed for drilling and boring processes where reproducible chip formation and tool life are priorities Uncoated carbide grade WXP40 Chipbreaker 7R-E57 for controlled chips For drilling and boring applications Walter Tools — industrial performance Consistent chip control for fewer interruptions The combination of the chipbreaker 7R-E57 and the WXP40 grade is designed to deliver predictable chip formation, reducing rework and machine downtime. The insert’s geometry directs chips away from the cutting zone, which improves evacuation in deep-hole drilling and boring cycles. For production environments this translates into higher uptime and more consistent cycle times, supporting lean manufacturing goals without compromising component quality. Robust uncoated carbide for predictable wear behaviour The WXP40 designation indicates an uncoated carbide class tailored for general cutting performance under moderate to demanding conditions. Uncoated grades can offer stable edge behaviour where adhesion of built-up material is a concern. In practice, this means repeatable tool life across batches and improved reproducibility of hole diameters and surface finish. Material suitability should be checked against the manufacturer’s product matrix to confirm the best match for specific steels or alloys. Designed to integrate into productive tool systems As a drilling/boring insert, the P4841C-7R-E57 WXP40 fits typical indexable toolholders and is intended for fast index changes and straightforward inventory handling. The geometry and grade aim to balance tool life and process security, supporting automated and semi-automated machining cells alike. For procurement and tool-room managers this results in simplified logistics and fewer adjustments during production ramps, contributing directly to overall process efficiency. Contact Metav Werkzeuge for an application review, availability or to request the P4841C-7R-E57 WXP40 insert for testing; Metav Werkzeuge offers technical consultation and prompt delivery coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P4841C-7R-E57-WXP40-WALTER Designation: P4841C-7R-E57 WXP40 Product type: Drilling/boring indexable insert Facts No numerical specifications provided in the data Special features Grade: WXP40 (uncoated carbide) Chipbreaker: 7R-E57 Series: Walter Schneidstoffsorte - Serie offen Material information: catalogue-dependent Manufacturer: Walter Tools FAQ What materials is this insert intended for? Material suitability must be verified in the product matrix; the WXP40 grade is an uncoated carbide designed for a broad range of machining tasks and should be matched to the workpiece material using Walter Tools’ recommendations. Is the insert coated? The insert in the designation P4841C-7R-E57 WXP40 is an uncoated carbide grade, selected where controlled edge stability and reduced adhesion build-up are desired. What is the function of the 7R-E57 chipbreaker? The 7R-E57 chipbreaker is engineered to produce compact, well-directed chips that improve evacuation during drilling and boring, helping to reduce interruptions and enhance process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
P4841C-7R-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S grade for reliable chip control and productive machining of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. P4841C-7R-F57 WKP35S – Drilling/boring indexable insert, Tiger‑tec Silver coating (Walter Tools) for steel and cast iron The P4841C-7R-F57 WKP35S is a robust indexable insert designed for drilling and boring operations, optimised for machining steel and cast iron in production environments where consistent chip formation and tool life are essential Tiger‑tec Silver coating for extended tool life WKP35S grade optimised for steel and cast iron Stable chip control and predictable performance Designed for drilling and boring indexable systems Longer tool life through advanced coating and grade The combination of the Tiger‑tec Silver coating with the WKP35S cutting grade delivers a significantly improved resistance to abrasive wear and thermal loading compared with conventional grades. This coated carbide chemistry reduces flank and crater wear during continuous drilling or boring cycles, which in turn extends tool life and reduces downtime for insert changes. For operations where thermal peaks and intermittent contact occur, the stable cutting edge behaviour contributes to fewer rework cycles and more predictable maintenance intervals, improving overall process reliability. Predictable chip formation and application range Designed for ISO material groups P (steel) and K (cast iron), the geometry and the 7R‑F57 chipbreaker support consistent chip breaking and evacuation during deep hole drilling and boring tasks. The insert’s chip control capability reduces the risk of damage to bores and cutting edges, enhancing surface finish quality and minimising secondary operations. For shops working across unalloyed, alloyed steels and a variety of cast iron grades, this cutting solution provides a balanced performance profile that supports productivity without requiring frequent parameter changes. Practical benefits for workshop productivity Integrating this grade into indexable drill or boring systems provides tangible process benefits: fewer insert changes, stable cycle times and improved throughput. The combination of coating technology and a geometry focused on chip guidance means reduced heat build‑up at the cutting zone and lower likelihood of built‑up edge formation. Process planners will find that the insert supports higher consistent machining performance, while operators appreciate the predictable behaviour during multi‑piece runs—factors that contribute to better machine utilisation and lower per‑part cost. Contact Metav Werkzeuge to specify the ideal Walter Tools Tiger‑tec Silver insert for the intended steel or cast iron application — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations Technical Data SKU: P4841C-7R-F57-WKP35S-WALTER Designation: P4841C-7R-F57 WKP35S Product type: Drilling/boring indexable insert Brand: Walter Tools Facts Series: Tiger‑tec Silver Chipbreaker: 7R‑F57 Grade: WKP35S Applicable ISO groups: P, K Special features Coating: Tiger‑tec Silver Material: coated carbide Primary application: Stahl and Gusseisen Optimised for stable chip formation and productive machining FAQ What materials are suitable for this insert? The insert is designed for ISO groups P (steel) and K (cast iron); the WKP35S grade and Tiger‑tec Silver coating specifically support machining of these workpiece families with stable chip control. Can the insert be used for both drilling and boring operations? Yes, the geometry and chipbreaker make the insert suitable for drilling and boring indexable systems, providing reliable chip evacuation and surface quality in both applications. How does the Tiger‑tec Silver coating help in daily production? The coating increases resistance to abrasive wear and thermal stress, which results in longer tool life and more consistent performance across production runs. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P4841C-7R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating, the WSP45G coated-carbide grade and the 7R‑F57 chipbreaker to secure consistent cutting edges and predictable cycle times in mixed-material drilling operations; order the insert directly via Metav Werkzeuge or consult the specialists for process integration. P4841C-7R-F57 WSP45G drilling/reaming indexable insert by Walter Tools — Tiger·tec Gold, P/M/S suitability The P4841C-7R-F57 WSP45G is an indexable insert designed for drilling and boring applications, optimised for steel, stainless steel and heat‑resistant alloys under medium to high cutting conditions. Tiger·tec Gold PVD coating for high wear resistance Versatile for Steel, Stainless steel and Superalloys Stable cutting edge with 7R‑F57 chipbreaker Coated carbide grade WSP45G for long tool life Increased productivity through engineered coating and substrate The combination of a PVD-coated surface and a tough carbide substrate ensures that wear progression is slowed and edge life is extended, which translates directly into longer tool life and fewer interruptions for index changes. The Tiger·tec Gold technology enhances thermal resistance and reduces adhesion on the cutting edge, so the insert maintains cutting performance when machining steel, stainless steel and superalloys. This means fewer tool swaps and a more predictable production rhythm, which supports tighter process planning and lowers per‑part tooling costs. Predictable chip formation and edge stability to reduce rework A defined chipbreaker geometry is essential for controlled chip evacuation and stable cutting forces. The 7R‑F57 chipbreaker is tuned for drilling and boring operations where consistent chip control reduces the risk of built‑up edge and improves surface finish. The WSP45G coating grade offers a balance of toughness and hardness suited to interrupted cuts and varying feed conditions; as a result, the cutting edge resists chipping and the number of rejected parts due to tool failure is reduced. Improved edge stability also supports higher feed rates under safe conditions, improving throughput. Easy integration into existing tool chains and material flexibility This indexable plate is prepared for straightforward mounting in compatible drilling and boring holders and is applicable across a wide material mix—P/M/S groups—so fewer inventory variants are needed for mixed‑workshop environments. The design supports rapid index changes and predictable wear cycles, simplifying maintenance planning. For shops aiming to harmonise tooling across different alloys, the combination of a robust substrate and a high‑temperature coating delivers a practical compromise between longevity and performance, making it suitable for both stable production runs and varied single‑part orders. Discuss machining scenarios and holder compatibility with Metav Werkzeuge to ensure optimal performance of the Tiger·tec Gold WSP45G insert — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P4841C-7R-F57-WSP45G-WALTER Article name: Bohr-/Aufbohrwendeschneidplatte P4841C-7R-F57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Drilling/reaming indexable insert Series: Tiger·tec Gold Facts Chipbreaker: 7R‑F57 Grade: WSP45G Material compatibility code: P / M / S Special features Coating: Tiger·tec Gold (PVD) Substrate: Coated carbide Applications: Drilling and boring/reaming operations Suitable for: Steel, Stainless steel, Heat‑resistant superalloys and Titanium Designation: P4841C-7R-F57 WSP45G FAQ What materials can be machined with this indexable insert? The P4841C‑7R‑F57 WSP45G insert is specified for P / M / S groups, i.e. steel, stainless steel and heat‑resistant superalloys/titanium, with the grade tuned to handle typical heat and chip‑formation challenges in those materials. How does the Tiger·tec Gold coating benefit drilling operations? The Tiger·tec Gold PVD coating increases thermal resistance and reduces adhesion at the cutting edge, which helps maintain tool life and cutting performance during drilling and boring cycles. What role does the 7R‑F57 chipbreaker play in performance? The 7R‑F57 chipbreaker controls chip shape and evacuation during drilling and reaming, promoting stable cutting forces and improved surface finish while reducing the risk of built‑up edge. Which toolholders are compatible with this insert designation? Holders that accept the P4841C‑7R‑F57 geometry and indexable plate format are compatible; verify seat and clamping dimensions in the holder specification to ensure correct fit and secure clamping. Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is original and brand new.
P4841C-7R-F57 WXP40 Wendeplatten - Walter Tools
The combination of WXP40 uncoated carbide and the 7R-F57 chipbreaker delivers reliable chip control and consistent cutting behaviour; benefit from stable process performance and straightforward insert replacement. Order directly via Metav Werkzeuge or consult the technical team for selection support. P4841C-7R-F57 WXP40 — Drill / boring indexable insert by Walter Tools, uncoated carbide with 7R-F57 chipbreaker P4841C-7R-F57 WXP40 is an indexable insert developed for drilling and boring operations where predictable chip formation and repeatable results are required. Open-series WXP40 uncoated carbide grade 7R-F57 chipbreaker for reliable chip control Designed for drilling and boring operations Stable chip formation for continuous productivity The combination of the WXP40 grade and the 7R-F57 chipbreaker focuses on consistent chip control, which reduces interruptions in production caused by poor chip evacuation. The insert’s composition—an uncoated carbide formulation from Walter Tools' open series—supports steady cutting performance across varied conditions. For industrial users this means fewer unexpected stoppages and a smoother tool-change rhythm, increasing uptime without relying on complex process changes. Clear guidance on material suitability and selection Material compatibility is determined by the manufacturer's product matrix; the insert’s uncoated carbide nature makes it versatile, but specific workpiece materials and hardness levels should be verified before application. The design is intended to offer balanced cutting behaviour rather than extreme hardness resistance, so process planners are advised to consult the technical data sheet to match the insert to the machining task. This approach protects component quality while optimising machining parameters. Operational advantages that support efficient machining The insert’s geometry and chipbreaker support stable cutting forces and predictable surface finish. Engineered for straightforward indexing and replacement in suitable toolholders, the component helps to shorten machine downtime associated with complex regrinds. Emphasis on reproducibility and process stability assists production engineers in maintaining consistent part tolerances and surface quality over long runs. Choose with confidence for predictable outcomes Walter Tools’ open-series grade targets broad applicability and steady performance rather than niche conditions; the WXP40 grade is an uncoated carbide choice that supports reliable, repeatable results when used within its application window. For procurement and process engineering teams, the insert represents a practical option where process security and routine replaceability are priorities. Always verify the detailed product matrix for final material and parameter recommendations. For reliable process performance with Walter Tools' WXP40 grade, contact Metav Werkzeuge for tailored selection advice and delivery assistance via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: P4841C-7R-F57-WXP40-WALTER Name: Bohr-/Aufbohrwendeschneidplatte P4841C-7R-F57 WXP40 Walter Tools Type: Drill / boring indexable insert Grade: WXP40 Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: 7R-F57 UID: P4841C-7R-F57-WXP40-WALTER Facts No numerical cutting parameters provided in the dataset No tool dimensions specified in the dataset Special features Coating: uncoated (unbeschichtetes Hartmetall) Material specification: Katalogabhängig (catalogue dependent) Intended application: drilling and boring operations Manufacturer brand: Walter Tools FAQ What materials is the P4841C-7R-F57 WXP40 suitable for? Material suitability must be checked against the manufacturer's product matrix; the P4841C-7R-F57 WXP40 is an uncoated carbide grade intended for a range of drilling and boring tasks but the precise workpiece compatibility depends on the selected machining parameters. Is the insert coated or uncoated? The P4841C-7R-F57 WXP40 is specified as uncoated carbide, which affects wear behaviour and the recommended cutting conditions for the intended machining applications. How does the 7R-F57 chipbreaker influence performance? The 7R-F57 chipbreaker is designed to promote controlled chip formation and evacuation during drilling and boring, contributing to process stability and fewer interruptions in standard machining operations. Can this insert be used in precision drilling where surface finish matters? When applied within the recommended parameters and matched to the correct toolholder and machine settings, the insert can help achieve consistent surface quality; final results depend on the full process setup and material choice. How is replacement and indexing handled for this insert? The insert is intended for straightforward indexing and replacement in compatible holders; users should confirm holder compatibility and follow standard safety and replacement procedures as documented by the toolholder and insert suppliers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and belongs to the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original factory-new merchandise of the manufacturer.
P4841C-8R-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and reliable chip control in demanding drilling and reaming operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. P4841C-8R-A57 WKP35S drilling/reaming indexable insert by Walter Tools — Tiger·tec Silver, 8R-A57 chipbreaker The P4841C-8R-A57 WKP35S is a drilling and reaming indexable insert engineered for high-productivity machining of steel and cast iron in industrial metalcutting applications Tiger·tec Silver coating for extended life Optimised 8R-A57 chipbreaker for controlled swarf Suited to steel and cast iron (ISO P / K) Robust grade WKP35S for industrial runs Sustained productivity through advanced coating and grade The combination of the Tiger·tec Silver coating with the WKP35S grade delivers a balance of wear resistance and toughness that supports longer tool life in repetitive operations. Coated carbide inserts use a hard, thin layer applied to a carbide substrate to resist abrasive wear and reduce thermal softening; this means fewer indexings and longer uninterrupted cycles in production. For shops machining ISO group P (steel) and K (cast iron), the result is a more predictable tool life and reduced tooling intervention, which translates into measurable gains in throughput and process reliability. Stable chip formation for clean drilling and reaming cycles The integrated 8R-A57 chipbreaker is designed to shape swarf consistently under the cutting conditions typical of drilling and reaming. Effective chip control reduces the risk of clogging, improves coolant access and supports consistent surface quality in the hole. Controlled chip flow prevents sudden load peaks on the tool and machine, enhancing process security and enabling higher metal removal rates with lower scrap risk. For engineers assessing cycle optimisation, improved chip management directly reduces machine downtime and rework. Designed for dependable industrial use and straightforward integration As an indexable insert for drilling and reaming applications, this geometry simplifies tool management: the insert locates accurately in a tool holder, is easy to replace or index, and provides repeatable positioning for serial production. The coated carbide composition is suitable for a wide range of steels and common casting alloys, offering a pragmatic compromise between toughness and hardness. For production planners, this means consistent hole quality, fewer tool changes and a reliable basis for process planning in machining cells and centres. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger·tec Silver inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for specific recommendations and availability Technical data Article number: P4841C-8R-A57-WKP35S-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte P4841C-8R-A57 WKP35S Walter Tools Manufacturer: Walter Tools Facts Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 8R-A57 Applicable material groups: P / K Special features Coating: Tiger·tec Silver (coated carbide) Material base: coated carbide grade WKP35S Typical application: drilling and reaming indexable insert Suitable for: steel (ISO P), cast iron (ISO K) FAQ What materials is this insert suitable for? The P4841C-8R-A57 WKP35S insert is specified for ISO groups P and K, meaning it is intended for machining steel and cast iron in drilling and reaming operations. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade increases wear resistance and thermal stability, allowing longer operating intervals and more consistent hole quality in serial machining. What is the role of the 8R-A57 chipbreaker? The 8R-A57 chipbreaker shapes chips predictably during drilling and reaming, improving chip evacuation, reducing clogging and supporting stable cutting conditions. Is this insert suitable for automated production cells? Yes, the indexable design and the robust WKP35S grade make the insert well suited to industrial production cells where repeatability and reduced tool changes are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools: The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tooling for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are used solely for clarification; there is no affiliation implied between our company and the named manufacturers. The offered item is original, factory-new merchandise of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com