P4841C-8R-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a robust chipforming geometry for consistent productivity and fewer tool changes; order directly via Metav Werkzeuge or consult our specialists for process optimisation. P4841C-8R-A57 WSP45G – Drilling/Boring indexable insert with Tiger·tec Gold by Walter Tools A P4841C-8R-A57 WSP45G drilling/boring indexable insert engineered for demanding machining of steel, stainless steel and heat‑resistant alloys across drilling and reaming operations. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Optimised 8R‑A57 chipformer for stable chips Designed for productive drilling and finishing Durable PVD coating for extended running times The combination of Tiger·tec Gold and a coated carbide substrate ensures a high degree of wear resistance and thermal stability under continuous cutting. This PVD technology reduces flank and crater wear while maintaining edge integrity, which leads to longer intervals between indexings and predictable tool life. The grade WSP45G is formulated as a tough, versatile option for applications in steel, stainless steel and superalloys, so production runs benefit from fewer interruptions and a more constant surface finish. Predictable chip control and cutting‑edge stability The integrated 8R‑A57 chipbreaker is engineered to form controllable chips even under varying feed and speed conditions. A reliable chipformer promotes safe evacuation, lowers the risk of built‑up edge and reduces workpiece rework. Thanks to the stable cutting edge geometry, the insert provides consistent dimensional accuracy during drilling and related operations, supporting tighter process windows and less scrap. The clear result is improved cycle times and a reduction in handling for downstream operations. Process integration that improves throughput As an indexable insert for drilling and boring, this item simplifies inventory and tooling setups by matching a resilient grade with a universal chip control design. Compatibility with a range of ISO material groups minimises the need for frequent insert changes, enabling smoother tool management and cost control. Where high productivity and repeatable results are required, the Walter Tools Tiger·tec Gold family supports consistent surface quality and high process reliability, which translates into reliable part output and measurable efficiency gains on the shop floor. Contact Metav Werkzeuge for application advice or to arrange delivery of Walter Tools Tiger·tec Gold inserts and complementary tooling solutions Technical data Article number: P4841C-8R-A57-WSP45G-WALTER Designation: P4841C-8R-A57 WSP45G Product type: Drilling/Boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material groups: P / M / S Chipbreaker: 8R‑A57 Grade: WSP45G Special features Coating: Tiger·tec Gold (PVD) Material composition: Coated carbide Suitable for: Steel, stainless steel, superalloys and titanium Application focus: Productive drilling, reaming and related finishing tasks FAQ Which workpiece materials can this insert machine effectively? The P4841C-8R-A57 WSP45G insert is suitable for steel, stainless steel and superalloys (ISO groups P / M / S) as designed by Walter Tools. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold offers enhanced wear resistance and thermal stability, extending tool life and maintaining cutting‑edge integrity during continuous operations with the P4841C-8R-A57 WSP45G. How does the 8R‑A57 chipbreaker affect machining? The 8R‑A57 chipformer produces controlled chips for safer evacuation and reduced built‑up edge, improving surface finish and decreasing the likelihood of tool failure. Is this insert suitable for both drilling and finishing operations? Yes, the geometry and the WSP45G grade make the insert appropriate for drilling, reaming and light finishing tasks where stable cutting performance is required. Can the insert be used for high‑temperature alloys such as titanium? The WSP45G grade and chip control design allow machining of heat‑resistant superalloys and titanium within appropriate parameters defined for the operation and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer Walter Tools.
P4841C-8R-A57 WXP40 Wendeplatten - Walter Tools
High process reliability and consistent chip control are delivered by the uncoated carbide WXP40 grade combined with the 8R-A57 chipformer, making this insert a cost-effective choice for stable drilling and boring operations; order the part directly via Metav Werkzeuge or consult our specialists for application matching and cutter selection. P4841C-8R-A57 WXP40 Bohr-/Aufbohrwendeschneidplatte — uncoated carbide insert with chipformer 8R-A57 (Walter Tools) The P4841C-8R-A57 WXP40 is a drill and bore insert engineered for controlled chip formation and consistent performance in general machining and reaming-related applications. Uncoated carbide grade WXP40 Optimised chipformer 8R-A57 Insert designation P4841C-8R-A57 Improved process efficiency through material and geometry The open-series WXP40 grade is an uncoated carbide formulation optimised for a broad range of machining tasks. Its material composition emphasises predictable wear behaviour and stable cutting action, which helps to reduce unplanned tool changes and downtime. The 8R-A57 chipformer is designed to shape chips reliably during drilling and boring operations, improving evacuation and decreasing the risk of build-up at the cutting edge. Together, these attributes contribute to measurable cycle-time savings and a more consistent quality of the finished bore. Consistent chip control for safer, cleaner machining Chip control is central to safe and economical shop-floor operation. The combination of the insert’s geometry and the 8R-A57 chipbreaker reduces long, stringy chips and promotes short, manageable swarf. This lowers the likelihood of component or tool damage and simplifies post-process cleaning. For users less familiar with chipbreaker nomenclature: a chipformer is the small relief and flank shaping that directs how material separates during cutting. On this insert, it is tuned to produce compact chips that assist coolant access and support steady cutting forces. Application guidance and handling benefits Selection of the right grade and geometry should be corroborated with the product matrix for specific workpiece materials. The insert designation and series information identify the part precisely for procurement and tool assembly. Handling the insert follows standard practice for indexable tooling: secure correct seat orientation, verify torque settings for the clamping screw, and inspect the cutting edge before use. When correctly applied, the WXP40 grade offers a balance between tool life and consistent finish quality, making it suitable for workshops seeking reliable repeatability without the complexity of specialised coated grades. For assistance with selection, stock availability or matching the P4841C-8R-A57 WXP40 to a machining task, contact Metav Werkzeuge for expert guidance and ordering: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: P4841C-8R-A57-WXP40-WALTER Insert designation: P4841C-8R-A57 WXP40 Type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Facts Grade: WXP40 (uncoated carbide) Chipformer: 8R-A57 Series: Walter grade — open series Material note: uncoated (check product matrix for specific workpiece suitability) Special features Uncoated carbide composition Optimised chip formation for drilling/boring Precise insert geometry for consistent cutting Application recommendation: verify with technical matrix FAQ Is the WXP40 grade coated or uncoated? The WXP40 grade supplied with the P4841C-8R-A57 insert is an uncoated carbide grade, intended for users who require predictable wear and straightforward reconditioning options. What is the purpose of the 8R-A57 chipformer? The 8R-A57 chipformer is designed to control chip shape during drilling and boring; on the P4841C-8R-A57 WXP40 insert it promotes short, manageable chips to support coolant access and steady cutting forces. Can this insert be used across different workpiece materials? The insert’s WXP40 grade provides broad applicability, but the exact suitability depends on the specific workpiece material; users should consult the product matrix to confirm compatibility for individual materials. How should the insert be mounted and inspected before use? Mount the insert according to the tool-holder manufacturer’s instructions, ensure secure clamping, check the seating surface for cleanliness, and visually inspect the cutting edges for damage before starting the operation. What is the exact designation to order this insert? Order as P4841C-8R-A57 WXP40 (SKU: P4841C-8R-A57-WXP40-WALTER) to ensure the correct uncoated carbide grade and chipformer configuration. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification; there is no affiliation between our company and the named manufacturers. The offered item is original, brand-new merchandise from the manufacturer.
P4841C-8R-E57 WKP35S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver coating and the WKP35S carbide grade delivers extended tool life and consistent chip control for efficient drilling and bore-enlargement operations; order genuine Walter Tools inserts through Metav Werkzeuge or consult the Metav team for application support. P4841C-8R-E57 WKP35S indexable insert for drilling and boring (steel, cast iron) – Walter Tools The P4841C-8R-E57 WKP35S is an indexable insert engineered for high-productivity drilling and bore-enlargement in steel and cast iron, combining a durable coated carbide grade with a dedicated chipformer. Tiger·tec Silver coating for extended life Optimised chipbreaker 8R-E57 for reliable chips Suited for steel and cast iron machining More throughput with advanced coating technology The Tiger·tec Silver coating, paired with the WKP35S grade, reduces flank wear and improves thermal resistance, which translates into a longer tool life and fewer tool changes during batch production. This insert’s coated carbide composition is designed to withstand the heat and abrasive conditions typical of machining steel and cast iron, so production runs can be carried out with greater continuity and lower tooling overhead. Consistent chip control for uninterrupted machining The 8R-E57 chipbreaker geometry provides stable chip formation, preventing blockages and minimising machine downtime. By controlling chip flow reliably, swarf evacuation is improved and surface finish remains consistent, which supports higher feed rates and dependable cycle times. The result is reduced process interruptions and a predictable machining rhythm for metal-cutting operations. Broad applicability across steel and cast-iron workpieces Designed in accordance with ISO material groups, this insert is suitable for the P and K categories, making it a practical choice when machining both unalloyed and alloyed steel as well as cast iron. The wide material coverage reduces the need for multiple tool types, simplifying tool inventories and enabling flexible production scheduling without sacrificing performance. Process security and repeatable results Manufactured by a well‑established brand, the insert offers process reliability and reproducible results in series machining. The combination of a robust grade and a proven chipformer supports consistent dimensional accuracy and surface quality, helping to maintain component tolerances and reduce rework rates. Integration into existing toolholders and machining strategies is straightforward, allowing efficient adoption into standard workflows. Contact Metav Werkzeuge for tailored application advice and to request original Walter Tools P4841C-8R-E57 WKP35S indexable inserts for your drilling and boring needs Technical Data SKU: P4841C-8R-E57-WKP35S-WALTER Designation: P4841C-8R-E57 WKP35S Product type: Drilling / boring indexable insert Manufacturer: Walter Tools Facts Material groups (ISO): P (steel), K (cast iron) Coating series: Tiger·tec Silver Chipbreaker: 8R-E57 Special features Grade: WKP35S (coated carbide) Suitability: steel and cast iron machining Stable chip formation and optimised chipformer High process reliability; broad material coverage FAQ What materials can be machined with this insert? The P4841C-8R-E57 WKP35S insert is suitable for ISO groups P and K, enabling efficient machining of both steel and cast iron workpieces. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade increases thermal resistance and reduces wear, which leads to longer tool life and fewer interruptions in production. What is the purpose of the 8R-E57 chipbreaker? The 8R-E57 chipbreaker is designed to produce controlled chips and improve evacuation during drilling and boring, reducing the risk of clogging and stabilising cycle times. Is this insert suitable for high-feed machining? Yes, the combination of the WKP35S grade and the 8R-E57 geometry supports higher feed rates by maintaining stable chip formation and resisting abrasive wear. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841C-8R-E57 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold coating and the versatile WSP45G grade combined with the dedicated 8R‑E57 chipbreaker for reliable chip control and extended edge life; order via Metav Werkzeuge or consult their specialists for application support. P4841C-8R-E57 WSP45G – Boring/drilling indexable insert (Walter Tools) The P4841C-8R-E57 WSP45G is a coated carbide indexable insert for drilling and boring operations, designed to deliver stable chip formation and consistent tool life across a broad material range. Tiger·tec Gold PVD-coated grade WSP45G Stable chip control with 8R‑E57 geometry Suitable for steel, stainless steel and superalloys Robust coated carbide for high process security Improved edge life through advanced coating technology The combination of Tiger·tec Gold coating and a WSP45G substrate provides a balanced wear resistance and toughness profile that reduces flank wear and extends usable life. The PVD-based surface layer increases thermal resistance and lowers adhesive wear, which means fewer interruptions for tool changes and more predictable batch output. For production environments where repeatability matters, the reduced wear rate translates directly into higher machine utilisation and lower per-part tooling costs. Predictable chip behaviour for stable machining cycles The 8R‑E57 chipbreaker geometry actively shapes and evacuates chips during turn‑and‑bore operations, supporting secure swarf flow and minimising the risk of recutting. Stable chip control reduces vibration and protects the cutting edge from irregular loads, improving surface finish and dimensional consistency. In practice, this means shorter setup times, fewer rejects and a smoother workflow on automated machining centres where reliable swarf evacuation is essential. Broad material capability reduces tool inventory Engineered for applicability across ISO groups P / M / S, the grade covers unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. This wide coverage limits the need for multiple dedicated grades and simplifies tooling logistics. The result is a leaner store of inserts, faster changeovers and higher flexibility when scheduling varied jobs — beneficial for job shops and production cells that handle mixed batches. Contact Metav Werkzeuge today to discuss how Walter Tools Tiger·tec Gold inserts can be integrated into existing toolholders or to check immediate availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: P4841C-8R-E57-WSP45G-WALTER Designation: P4841C-8R-E57 WSP45G Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Core specifications Applicable materials: P / M / S Chipbreaker: 8R‑E57 Grade/series: Tiger·tec Gold Sort: WSP45G Features & applications Coating/grade: coated carbide, PVD technology Suitable for: steel, stainless steel, heat‑resistant superalloys and titanium Series: Tiger·tec Gold — versatile cutting performance Chipformer/geometry: 8R‑E57 for stable chip formation FAQ Which materials can be machined with this insert? The P4841C-8R-E57 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys (ISO groups P, M and S). What are the benefits of the Tiger·tec Gold coating on this insert? The Tiger·tec Gold coating on the WSP45G grade improves thermal resistance and wear behaviour, extending edge life and enabling more consistent batch production. How does the 8R‑E57 chipbreaker affect machining? The 8R‑E57 geometry promotes controlled chip formation and evacuation, reducing vibration and improving surface finish during drilling and boring cycles. Is this insert compatible with standard boring holders and tool bodies? The design follows common indexable insert conventions; compatibility should be verified against the holder geometry and clamping method for optimal fit and performance. Walter Tools (Walter AG), headquartered in Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. The mentioned brand is cited for explanatory purposes only; the offered item is original and new from the manufacturer.
P4841C-8R-E57 WXP40 Wendeplatten - Walter Tools
Robust uncoated cemented carbide in the Walter grade WXP40 paired with the chipbreaker 8R‑E57 delivers consistent chip control and economical machining for drilling and boring indexable systems. Order the P4841C-8R-E57 WXP40 directly via Metav Werkzeuge or ask our consultants if needed P4841C-8R-E57 WXP40 – Drill and bore indexable insert, chipbreaker 8R‑E57 by Walter Tools The P4841C-8R-E57 WXP40 is an indexable insert engineered for drilling and boring applications in industrial metalcutting, designed to provide repeatable cutting performance within modular tool systems Open-series uncoated carbide grade WXP40 Chipbreaker 8R‑E57 for controlled chip formation Designed for drilling and boring indexable systems Reliable chip control for steady production The insert offers predictable chip formation thanks to the chipbreaker 8R‑E57, which helps to reduce interruptions and cycle-time variability in serial machining. The combination of the WXP40 cemented carbide grade and the dedicated chip geometry supports consistent evacuation of swarf in drilling and boring operations, contributing to longer uninterrupted runs and less manual chip clearing. This results in improved process efficiency and a more stable production flow for workshops using indexable systems. Simple integration with modular toolholders As an indexable insert, this item is intended for straightforward mounting in standard drilling and boring toolholders, enabling rapid replacement and minimal machine downtime. The geometry and designation match common industrial tool families, allowing fast tool set-up and repeatable alignment. The open-series design of the Walter grade assists toolroom planning by offering a standardised insert that can be stocked and exchanged quickly, supporting productive shopfloor logistics and reduced changeover times. Material guidance and selection notes for safe application The grade is supplied as uncoated cemented carbide; this should be interpreted as providing a steady cutting edge suitable for a range of operations, with specific workpiece compatibility to be verified. Material suitability must be checked against the product matrix and machining data provided for the insert to determine optimal feeds and speeds. For customers seeking process stability, pairing the insert with appropriate coolant and validated cutting parameters is recommended to achieve the best balance of tool life and surface quality. For tailored advice on Walter Tools inserts like the P4841C-8R-E57 WXP40 and to discuss suitable parameters or stocking options, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: P4841C-8R-E57-WXP40-WALTER Name: Bohr-/Aufbohrwendeschneidplatte P4841C-8R-E57 WXP40 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WXP40 ISO designation: P4841C-8R-E57 WXP40 Chipbreaker: 8R-E57 Material: Katalogabhängig Core data Item UID: P4841C-8R-E57-WXP40-WALTER Special features Uncoated cemented carbide (unbeschichtetes Hartmetall) Open-series Walter grade for standardisation Check workpiece suitability via product matrix FAQ What cutting material is the insert intended for? Workpiece compatibility for the P4841C-8R-E57 WXP40 must be determined from the product matrix; the insert is supplied in an uncoated cemented carbide grade and suitability depends on the specific material and application. Is the insert coated or uncoated? The P4841C-8R-E57 WXP40 is an uncoated cemented carbide insert, supplied in the Walter open series for standard indexable applications. How does the chipbreaker 8R‑E57 affect performance? The chipbreaker 8R‑E57 is designed to shape and control swarf during drilling and boring, promoting steady chip evacuation and reducing the risk of clogging in indexable tool systems. Can the insert be used in standard drilling toolholders? Yes, the design of the insert is intended for integration into common indexable drilling and boring toolholders, allowing rapid replacement and consistent positioning. What information is needed to select cutting parameters? To select feeds and speeds for the P4841C-8R-E57 WXP40, consult the product matrix and machining data for the Walter grade WXP40, and consider the workpiece material, toolholder rigidity and cooling strategy. Manufacturer: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is a brand of Walter AG and part of the Sandvik group. Protected trademarks and brand names remain the property of their respective owners. Mention of brand names is for explanatory purposes only; there is no affiliation implied between our company and the mentioned brands. The item offered is original, factory-new goods from the manufacturer.
P4841C-8R-F57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WKP35S grade and the 8R‑F57 chipformer to increase tool life and cutting performance; order directly via Metav Werkzeuge or consult our specialists for application advice. P4841C-8R-F57 WKP35S drilling/boring indexable insert, Tiger‑tec Silver, for steel and cast iron — Walter Tools A P4841C-8R-F57 WKP35S drilling/boring indexable insert engineered for productive machining, offering durable coated carbide and precise chip control in steel and cast iron applications Tiger‑tec Silver coating for long tool life WKP35S coated carbide grade Optimised 8R‑F57 chipformer for clean chips Designed for steel and cast iron machining Boost in-process productivity through extended tool life The combination of Tiger‑tec Silver coating and the WKP35S cutting grade provides a measurable improvement in wear resistance and edge stability. Coated carbide substrates reduce flank and crater wear under typical machining temperatures, which translates into longer service intervals and fewer index changes. For production environments that prioritise consistent cycle times, this insert offers a robust balance between tool life and cutting performance. Reliable chip control and stable cutting for smoother cycles The 8R‑F57 chipformer geometry is designed to promote predictable chip breakage and evacuation during drilling and boring operations. Stable chip formation reduces the risk of re-cutting and tool vibration, improving surface finish and dimensional repeatability. For processes where reliable material removal and reduced downtime are critical, the optimised chipformer contributes directly to improved machine utilisation and part quality. Application range and handling made straightforward Classified for ISO groups P and K, the insert is suitable for machining steel and cast iron, addressing the typical thermal and abrasive conditions associated with these materials. As an indexable insert for drilling and boring tools, it integrates into standard toolholder systems that accept the P4841C family geometry. For operators less familiar with technical codes: the grade denotes a coated carbide solution and the chipbreaker code reflects the insert’s flute and groove design for chip management. Contact Metav Werkzeuge to specify tooling with Walter Tools' Tiger‑tec Silver inserts or request an application review via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P4841C-8R-F57-WKP35S-WALTER SKU: P4841C-8R-F57-WKP35S-WALTER Product: Bohr-/Aufbohrwendeschneidplatte P4841C-8R-F57 WKP35S Walter Tools Facts Series: Tiger-tec Silver Grade: WKP35S Chipformer: 8R‑F57 Material groups: P / K Special features Coating: Tiger‑tec Silver Material: coated carbide Suitable for: steel, cast iron Type: drilling/boring indexable insert ISO designation: P4841C-8R-F57 WKP35S FAQ What materials is this insert intended for? The P4841C-8R-F57 WKP35S insert is intended for machining steel and cast iron, following the ISO P and K group classifications. What advantages does the Tiger‑tec Silver coating offer? Tiger‑tec Silver coating enhances wear resistance and thermal stability on the WKP35S grade, contributing to longer tool life and consistent cutting performance. How does the 8R‑F57 chipformer affect machining? The 8R‑F57 chipformer promotes controlled chip breakage and evacuation, which helps maintain surface finish and reduces the likelihood of tool chatter during drilling and boring. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841C-8R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life, consistent chip control and broad material versatility to improve productivity and reduce downtime. The Tiger·tec Gold-coated insert delivers economic machining across steels, stainless steels and heat-resistant alloys — order directly via Metav Werkzeuge or consult our specialists for application-specific support. P4841C-8R-F57 WSP45G drilling/reaming indexable insert, Tiger·tec Gold coating – Walter Tools The P4841C-8R-F57 WSP45G is an indexable insert designed for drilling and reaming tasks, offering robust performance for steels, stainless steels and heat‑resistant superalloys in demanding machining environments. Tiger·tec Gold PVD coating for longevity Versatile for steel, stainless and superalloys Stable chip control with 8R‑F57 chipbreaker Reliable edge stability for demanding cuts Improved productivity through proven coating technology The insert is built on the WSP45G grade using the Tiger·tec Gold coating concept, which combines a wear‑resistant surface with a tough substrate to extend tool life under high thermal and mechanical loads. This technical pairing reduces flank wear and supports longer tool cycles, thereby lowering changeover frequency and increasing overall component throughput. The design is particularly effective where heat generation is significant, making it a pragmatic choice for shops seeking measurable gains in uptime and cost efficiency. Consistent chip control for reliable processes Equipped with the 8R‑F57 chipbreaker geometry, the cutting edge promotes secure and predictable chip formation during drilling and reaming operations. Controlled chip flow decreases the risk of built‑up edge and helps maintain surface quality on bores and internal features. As a result, process stability and repeatability are enhanced, which is essential for batch production and precision manufacturing where consistent results and reduced rework are priorities. Versatility across demanding materials Rated for ISO groups P, M and S, the insert is suitable for a wide range of applications: conventional and alloyed steels, stainless steels that tend to work‑harden, and heat‑resistant superalloys or titanium where thermal resistance and edge stability are required. This broad applicability simplifies tooling lists and enables standardisation across mixed‑material production, reducing inventory complexity while maintaining machining capability for challenging components. Integration benefits and quality assurance The geometry and substrate of this indexable insert facilitate straightforward integration into existing drilling and reaming toolholders, enabling quick tool changes and predictable cutting conditions. The combination of a engineered chipbreaker and PVD surface treatment supports improved surface finishes and dimensional stability, contributing to reduced downstream processing. Backed by Walter Tools’ tooling know‑how, the insert represents a balance of durability and precision for industrial metalcutting operations. Contact Metav Werkzeuge today for tailored advice on implementing the P4841C-8R-F57 WSP45G insert in specific machining setups and request application‑aligned recommendations from our technical team. Technical data Item number: P4841C-8R-F57-WSP45G-WALTER SKU: P4841C-8R-F57-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841C-8R-F57 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Applicable ISO groups: P, M, S Chipbreaker: 8R‑F57 Material class: coated carbide (PVD) Product type: drilling/reaming indexable insert Special features Coating technology: Tiger·tec Gold (PVD) Designed for steels, stainless steels and superalloys Stable chip control and edge stability WPL designation: P4841C-8R-F57 WSP45G FAQ What materials can be machined with this insert? The P4841C-8R-F57 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for steels, stainless steels and heat‑resistant superalloys including titanium. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WSP45G grade combines wear resistance with substrate toughness to reduce flank wear and thermal damage, thereby extending tool life in heavy or high‑temperature cutting conditions. What benefit does the 8R‑F57 chipbreaker provide? The 8R‑F57 chipbreaker promotes controlled chip formation and evacuation during drilling and reaming, which enhances process stability and improves bore surface quality. Is this insert compatible with existing holders? The insert is designed as a standard indexable drilling/reaming insert and will integrate with compatible toolholders; check holder specifications for geometry matching. Who manufactured this insert? The insert is a Walter Tools product and utilises Walter’s Tiger·tec Gold technology for coated carbide solutions. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation; there is no affiliation between our company and the named manufacturers. The offered item is original, brand‑new merchandise from the manufacturer.
P4841C-8R-F57 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of WXP40 uncoated carbide performance and the 8R-F57 chipbreaker for stable chip formation and predictable tool life, improving machining throughput; order the insert directly via Metav Werkzeuge or consult our specialists for suitability in specific material matrices. P4841C-8R-F57 WXP40 drilling/boring indexable insert by Walter Tools The P4841C-8R-F57 WXP40 is a drilling and boring indexable insert designed for efficient chip control and reliable performance in general machining when used in accordance with the product matrix. Walter uncoated carbide grade WXP40 Chipbreaker 8R-F57 for reliable chip control Suitable for drilling and boring applications Open-grade series for adaptable cutting conditions Stable chip control and extended tool life The combination of the 8R-F57 chipbreaker and the WXP40 uncoated carbide results in consistently shaped chips and predictable cutting behaviour. The chip geometry reduces the risk of clogging in through-tool or conventional drilling operations, which contributes to fewer interruptions and a more productive machining cycle. Thanks to its design, the insert supports repeatable results across batches, enabling a more efficient production rhythm and a lower rate of tool changes. This translates into tangible improvements in cycle time and process reliability. Versatile application — verify material compatibility Designed for drilling and boring operations, this insert is part of an open-grade series intended for adaptable use across different cutting conditions. Material suitability should be confirmed against the detailed product matrix to ensure optimal selection for specific alloys and hardness ranges. When correctly matched, the insert delivers consistent cutting action and surface integrity; when selection is unclear, checking the matrix prevents premature wear and maintains component quality. The technical matrix-based approach helps integrate the insert into defined process windows for stable, predictable results. Simple integration into existing tool inventories The insert’s designation and series make it straightforward to integrate into standard drilling and boring tool holders designed for indexable inserts. The open-grade philosophy provides production engineers with flexibility when balancing tool life, surface finish and productivity. Using this insert can contribute to a cost-conscious tooling strategy by offering stable chip formation, robust uncoated carbide performance and consistent repeatability. For production environments aiming to maintain throughput while controlling tooling inventory, the insert represents a practical choice within an engineered tooling system. Contact Metav Werkzeuge for advice on the P4841C-8R-F57 WXP40 insert, material compatibility checks and current availability through Metav Werkzeuge. Technical Data Article number: P4841C-8R-F57-WXP40-WALTER Designation: P4841C-8R-F57 WXP40 Product type: drilling/boring indexable insert Grade: WXP40 (uncoated carbide) Chipbreaker: 8R-F57 Series: Walter open-grade series Material note: catalog-dependent Facts No measurable data provided Special features Open-grade carbide insert Uncoated carbide material class Designed for chip control in drilling/boring Series information included in product matrix Manufacturer brand: Walter Tools FAQ What types of operations is this insert suitable for? The P4841C-8R-F57 WXP40 insert by Walter Tools is intended for drilling and boring operations; verify the exact application and cutting parameters against the product matrix before use. Is the WXP40 grade coated or uncoated? The WXP40 grade is an uncoated carbide grade; selection should be based on the part material and cutting conditions recommended in the product matrix. How does the 8R-F57 chipbreaker benefit machining? The 8R-F57 chipbreaker shapes chips reliably to reduce clogging and improve chip evacuation during drilling and boring, which supports continuous operation and consistent surface quality with the Walter Tools insert. Where to check if this insert fits specific materials? Compatibility and the recommended cutting windows for the P4841C-8R-F57 WXP40 insert are provided in the manufacturer’s product matrix; consult the matrix or Metav Werkzeuge for precise recommendations. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Trademark and brand names are the property of their respective owners. Marked names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
P4841P-1R-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP25S grade for improved wear resistance and stable chip formation in steel and cast iron machining; the result is predictable tool life and higher process productivity. Order the insert directly via Metav Werkzeuge or ask our consultants if specialist advice is required. P4841P-1R-A57 WKP25S — Drilling/boring indexable insert for steel and cast iron, Walter Tools The P4841P-1R-A57 WKP25S is a coated carbide indexable insert from the Tiger·tec Silver series, engineered for efficient drilling and boring in steel and cast iron applications. Tiger·tec Silver coating for extended life Optimised for steel and cast iron machining Stable chip formation and consistent edge Reliable performance in steel and cast iron machining The insert combines the WKP25S grade with the Tiger·tec Silver coating to deliver consistently low wear rates when machining the ISO groups P (steel) and K (cast iron). The chemistry and coating architecture are tuned to the thermal and abrasive demands of these materials, so the component maintains edge stability under varying cutting conditions. For production environments this means fewer tool changes and reduced unplanned downtime, resulting in a measurable improvement to overall throughput. Coating technology that extends service intervals The coated carbide substrate, together with the Tiger·tec Silver top layer, improves resistance to adhesion and abrasive wear. This surface treatment supports a stable cutting edge and helps prevent premature flank wear during extended cycles. The practical benefit is longer intervals between regrinds or insert changes and more consistent surface finish on turned or bored features, which translates directly into lower unit costs and faster cycle times on batch and single-part production. Geometry and chip control for secure machining The 1R-A57 chipbreaker geometry is designed to produce short, manageable chips in a wide range of cutting conditions, promoting stable chip formation and safe evacuation from the hole. Stable chips reduce the risk of built-up edge and machine interruptions; the consequence is improved process reliability and repeatable hole quality. In workshops where predictable tool life and shop-floor efficiency are priorities, this insert contributes to fewer scrap parts and a smoother production flow. Technical drawings and cutting data can be provided to align insert selection with specific spindle speeds and feed rates. For demanding drilling and boring tasks in steel and cast iron, specify the Walter Tools Tiger·tec Silver grade—contact Metav Werkzeuge for tailored recommendations or to secure regular supply of P4841P-1R-A57 WKP25S inserts. Technical data Article number: P4841P-1R-A57-WKP25S-WALTER SKU: P4841P-1R-A57-WKP25S-WALTER Name: P4841P-1R-A57 WKP25S Type: Drilling/boring indexable insert Brand: Walter Tools Key specifications Grade: WKP25S Coating: Tiger·tec Silver Chipbreaker: 1R-A57 Applicable material groups: P (steel), K (cast iron) Series: Tiger·tec Silver Features & materials Coated carbide construction Stable chip formation Optimised for unalloyed and alloyed steel Adapted for abrasive cast iron materials Designed for productive, repeatable machining FAQ What materials is this insert designed to machine? The P4841P-1R-A57 WKP25S insert is intended for ISO groups P and K, meaning it is suitable for machining a range of steel grades and cast iron. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WKP25S grade improves wear resistance and reduces adhesive wear, helping the insert to maintain a sharp cutting edge and prolonging service life in demanding drilling applications. Which chip behaviour can be expected with the 1R-A57 geometry? The 1R-A57 chipbreaker produces short, controllable chips that promote safe evacuation and minimise the risk of built-up edge, improving process reliability during drilling and boring. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
P4841P-1R-A57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S grade for extended tool life and reliable chip control in demanding drilling and enlargement operations; order via Metav Werkzeuge or consult the technical team for application support. P4841P-1R-A57 WKP35S Drilling/boring indexable insert — Tiger·tec Silver by Walter Tools The P4841P-1R-A57 WKP35S is a coated indexable insert engineered for drilling and bore-enlargement tasks, delivering consistent performance in machining steel and cast iron. Tiger·tec Silver coating for longer tool life WKP35S grade for steel and cast iron 1R-A57 chipbreaker for consistent chip control Stable cutting edge for productive machining Longer tool life through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP35S grade delivers a wear-resistant cutting edge, which translates into fewer tool changes and longer uninterrupted production cycles. The insert’s substrate and coating system form a coated carbide structure that resists thermal and abrasive wear typical for P- and K-group materials. This technical pairing reduces flank wear progression and supports predictable tool life, improving overall process efficiency and lowering unit machining costs. Consistent chip formation and reduced cycle interruptions The integrated 1R-A57 chipbreaker is designed to produce manageable chip shapes during drilling and bore enlargement, preventing chip congestion in the cutting zone and supporting stable coolant flow. Controlled chip formation leads to more reliable hole quality and less manual intervention, which increases machine uptime and contributes to higher throughput. The geometry supports repeatable performance across batch runs and aids in maintaining surface finish and dimensional accuracy. Broad applicability and process confidence for production shops Optimised for the ISO groups P (steel) and K (cast iron), the insert is suitable for both unalloyed and alloyed steels as well as a wide range of cast-iron grades. The proven cutting-edge stability and coating technology make this insert a practical choice for manufacturers seeking consistent results in mixed-production environments. For specific machining strategies, tooling holders or cutting parameters, application advice is available from Metav Werkzeuge to ensure the insert meets the intended process requirements. Contact Metav Werkzeuge for tailored application support and reliable supply of the Walter Tools P4841P-1R-A57 WKP35S insert at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: P4841P-1R-A57-WKP35S-WALTER Article designation: P4841P-1R-A57 WKP35S Type: Drilling/boring indexable insert Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Core specifications Included angle: 57° Chipbreaker: 1R-A57 Material application groups: P / K Materials & special features Coating technology: Tiger·tec Silver Tool material: coated carbide (beschichtetes Hartmetall) Suitable for: Steel (P), Cast iron (K) Typical applications: drilling and bore enlargement Stable cutting edge for productive machining FAQ What materials can be machined with this insert? The P4841P-1R-A57 WKP35S insert is optimised for ISO groups P (steel) and K (cast iron) and is suitable for unalloyed and alloyed steels as well as a broad range of cast-iron grades. What does the Tiger·tec Silver designation mean for performance? Tiger·tec Silver denotes a modern coating technology and, together with the WKP35S grade, provides enhanced wear resistance and thermal stability for extended tool life under drilling and bore-enlargement loads. How does the 1R-A57 chipbreaker improve machining? The 1R-A57 chipbreaker promotes controlled chip formation, reducing the risk of chip accumulation in the hole and helping to maintain consistent surface finish and dimensional accuracy during production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are used here solely for explanation. There is no connection between our company and the mentioned brands beyond the sale of genuine, factory-new products of the manufacturer.
P4841P-1R-A57 WSP45G Wendeplatten - Walter Tools
P4841P-1R-A57 WSP45G Bohr-/Aufbohrwendeschneidplatte von Walter Tools Die P4841P-1R-A57 WSP45G ist eine vielseitige Bohr-/Aufbohrwendeschneidplatte für produktive Zerspanung von Stahl, rostfreiem Stahl und hitzebeständigen Legierungen Tiger-tec Gold Beschichtung für hohe Prozesssicherheit Vielseitige Sorte WSP45G für Stahl, rostfrei und Superlegierungen Spanbrecher 1R-A57 für kontrollierte Spanbildung Beschichtetes Hartmetall für stabile Schneidkante Optimiert für Fräs- und Aufbohranwendungen Höhere Prozesssicherheit und Standzeit durch Beschichtung Die Kombination aus Tiger-tec Gold Beschichtung und beschichtetem Hartmetall sorgt für verbesserte Verschleißfestigkeit und konstante Schneidkantengüte. Das Ergebnis ist eine längere Nutzungsdauer des Werkzeugs und eine zuverlässige Bearbeitung auch bei erhöhten Temperaturbelastungen. Anwender profitieren von gleichbleibender Oberflächenqualität und reduzierten Stillstandszeiten. Präzise Spanformung und definierte Schnittbedingungen Der Spanbrecher 1R-A57 wurde zur stabilen Spanbildung entwickelt und reduziert Aufbauschneiden sowie Vibrationen bei Bohr- und Aufbohrprozessen. Für Fertigungsprozesse bedeutet das eine geringere Maschinenbelastung und weniger Nacharbeit. Die gezielte Spanlenkung unterstützt konstante Prozessparameter und erleichtert die Integration in bestehende Bearbeitungszyklen. Einsatzfelder und Werkstoffabdeckung für produktive Zerspanung Die Wendeschneidplatte ist ausgelegt für die Bearbeitung von Stahl, rostfreiem Stahl und hitzebeständigen Superlegierungen/Titan, entsprechend der ISO 513 Einordnung P / M / S. Durch die zähe und vielseitige Sortencharakteristik eignet sich das Produkt besonders für anspruchsvolle Fräs- und Aufbohranwendungen, bei denen Wärmeentwicklung und Zähigkeit beherrscht werden müssen. Empfehlung: Die Bohr-/Aufbohrwendeschneidplatte P4841P-1R-A57 WSP45G von Walter Tools direkt bei Metav Werkzeuge anfragen – Telefon +49 2822 7131930 oder per eMail info@metav-werkzeuge.com Produktmerkmale Artikelnummer: P4841P-1R-A57-WSP45G-WALTER Marke: Walter Tools Baureihe: Tiger-tec Gold Sorte: WSP45G Spanbrecher: 1R-A57 Produkttyp: Bohr-/Aufbohrwendeschneidplatte Fakten Besonderheiten Material: beschichtetes Hartmetall Beschichtung: Tiger·tec Gold (PVD) Bearbeitbare Werkstoffe: P (Stahl), M (rostfreier Stahl), S (Superlegierungen/Titan) Sorteneigenschaft: zäh und vielseitig, ausgelegt für Fräsanwendungen Ziel: stabile Schneidkante und optimierte Spanformer FAQ Was kennzeichnet die Sorte WSP45G? WSP45G ist eine beschichtete Hartmetallsorte aus der Tiger-tec Gold Serie, die zähe und vielseitige Eigenschaften für Fräs- und Aufbohranwendungen bietet und so eine sichere Spanbildung bei Stahl, rostfreiem Stahl und Superlegierungen ermöglicht. Für welche Werkstoffe eignet sich die Wendeschneidplatte besonders? Die Platte eignet sich für Stahl, rostfreien Stahl und hitzebeständige Superlegierungen/Titan entsprechend der ISO-Zuordnung P / M / S und bietet dabei zuverlässige Schneidkantenstabilität. Wie unterstützt der Spanbrecher 1R-A57 die Bearbeitung? Der Spanbrecher 1R-A57 sorgt für kontrollierte Spanbildung, reduziert Aufbauschneiden und verbessert die Prozessstabilität bei Bohr- und Aufbohrvorgängen. Lässt sich die P4841P-1R-A57 WSP45G in bestehende Fräszellen integrieren? Ja, die Wendeschneidplatte wurde für produktive Fräs- und Aufbohrprozesse entwickelt und lässt sich aufgrund konstanter Schnittbedingungen gut in vorhandene Bearbeitungsprozesse integrieren. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841P-1R-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP25S grade and the 1R‑E57 chipbreaker to increase process stability and tool life in demanding drilling and bore‑enlargement operations. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific guidance. P4841P-1R-E57 WKP25S drilling/bore‑enlargement indexable insert – Walter Tools The P4841P-1R-E57 WKP25S is a drilling and bore‑enlargement indexable insert engineered for productive machining of steel and cast iron, utilising the Tiger‑tec Silver coating technology. Tiger‑tec Silver coated for improved wear resistance WKP25S grade for reliable chip control Suitable for steel and cast iron machining 1R‑E57 chipbreaker for stable cutting performance Maximised tool life and more predictable processes The combination of the Tiger‑tec Silver coating and the WKP25S coated carbide substrate delivers enhanced durability under the thermal and mechanical loads typical of drilling and reaming operations. The coating reduces abrasive wear and improves edge strength, which translates into fewer index changes and longer uninterrupted production runs. For shops aiming to improve tool life and reduce tooling-related downtime, this insert offers a clear economic advantage through extended service intervals and more consistent component quality. Improved chip control for safer, faster cycles Thanks to the 1R‑E57 chipbreaker geometry, chip formation is more predictable when machining a broad range of steels and cast irons. Controlled, short chips reduce the risk of workpiece or tool damage and simplify chip evacuation from bores, allowing higher feed rates where the machine and workholding permit. The insert’s geometry supports reliable cutting performance, making process optimisation and cycle-time reduction more achievable without compromising surface finish. Application fit, handling and supplier support Designed for productive use in standard drilling and bore‑enlargement toolholders, this indexable insert is suited to workshop and production environments machining steel and cast iron per ISO 513 classifications. The insert’s designation and series allow straightforward specification in tool lists and procurement systems, while Walter Tools’ heritage ensures reproducible quality. For customers seeking application advice or verification of compatibility with a specific toolbody, Metav Werkzeuge can provide tailored recommendations and technical clarification. Contact Metav Werkzeuge for availability and application advice on Walter Tools Tiger‑tec Silver inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: P4841P-1R-E57-WKP25S-WALTER Designation: P4841P-1R-E57 WKP25S Product type: drilling/bore‑enlargement indexable insert Brand: Walter Tools Facts No numerical specifications provided in the source data Special features Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: 1R‑E57 Material suitability: P / K Applicable materials: steel and cast iron Original designation without grade: P4841P-1R-E57 UID: P4841P-1R-E57-WKP25S-WALTER FAQ What materials can this insert machine effectively? The insert is designed for machining steel and cast iron, with the WKP25S grade and Tiger‑tec Silver coating optimised for the typical heat and chip conditions of these material groups. How does the 1R‑E57 chipbreaker improve production? The 1R‑E57 chipbreaker produces controlled, short chips that ease evacuation from bores and reduce the likelihood of rework, enabling more stable cutting conditions and potential cycle‑time improvements with the P4841P-1R-E57 WKP25S insert. Is this insert compatible with standard drilling toolholders? The insert is intended for drilling and bore‑enlargement toolholders; compatibility depends on the toolbody’s pocket and clamping system—dimension checks against the insert designation are recommended. What are the main benefits of the Tiger‑tec Silver series? Tiger‑tec Silver enhances wear resistance and edge stability, which helps to extend insert life and maintain consistent surface quality in serial operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841P-1R-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, broad material compatibility for steel and cast iron, and stable chip formation to increase machining productivity; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. P4841P-1R-E57 WKP35S – drilling/reaming indexable insert with Tiger·tec Silver coating | Walter Tools A P4841P-1R-E57 WKP35S indexable insert designed for drilling and reaming applications, optimised to deliver consistent performance when machining steel and cast iron. Tiger·tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining Stable chip formation for consistent results High wear resistance for longer tool life Increase throughput with a wear-resistant coating and consistent chip control The combination of the Tiger·tec Silver coating and the WKP35S grade provides a clear productivity advantage: improved wear resistance reduces downtime for insert changes and maintains dimensional stability across longer production runs. As a coated carbide cutting solution, this insert is designed to cope with the heat and abrasion typical of machining unalloyed and alloyed steels, which supports faster cycle times and more reliable planning of tool-change intervals. The result is measurable process stability and fewer interruptions. Reliable chip behaviour and predictable surface quality for steel and cast iron Built around a specific chipbreaker geometry (1R‑E57), the insert promotes stable chip formation, which reduces the risk of built-up edge and improves surface finish on challenging materials. Its geometry and coating combination have been selected for the typical chip characteristics of both steel and cast iron, so machinists benefit from controlled chip flow and fewer secondary operations. This translates into consistent part quality and reduced rework, particularly in serial manufacturing and demanding workshop environments. Practical application notes and advantages in production settings This insert is suitable for drilling and reaming operations where repeatable results and cost-effective tool life are priorities. The indexable insert concept allows for rapid index changes, lowering set-up time and supporting lean workflows. Because the grade targets the P/K material groups, it is a versatile option across mixed production runs that include both steel and cast iron components. Integrating these inserts into existing toolholders typically yields immediate gains in stability and repeatability without complex process changes. For technical recommendations on selecting the correct Walter Tools Tiger·tec Silver WKP35S insert for specific machines or materials, contact Metav Werkzeuge for tailored advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P4841P-1R-E57-WKP35S-WALTER Article designation: P4841P-1R-E57 WKP35S Product type: drilling/reaming indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Material groups: P / K Applicable for: steel (P), cast iron (K) Chipbreaker: 1R‑E57 Special features Coating: Tiger·tec Silver Substrate: coated carbide Application: drilling and reaming operations Focus: stable chip control and extended tool life FAQ What materials is this insert suited for? The P4841P-1R-E57 WKP35S insert is specified for the P and K material groups, meaning it is suited for machining steel (P) and cast iron (K). What is the advantage of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade improves thermal resistance and wear properties, which contributes to longer life and more consistent performance during drilling and reaming. Which chipbreaker is used and why does it matter? The insert uses the 1R‑E57 chipbreaker, which promotes stable chip formation and helps maintain surface quality and process reliability in serial machining. Can this insert be used for finishing operations? While primarily designed for reliable drilling and reaming, the controlled chip behaviour and wear resistance of the WKP35S grade can support fine finishes where geometry and cutting parameters are appropriately set. How does this insert support productivity in a production environment? By combining a robust coated carbide substrate with an optimised chipbreaker and the Tiger·tec Silver coating, the insert reduces tool-change frequency and improves repeatability, helping to streamline machining cycles. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. The mention of brand names is for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product from the manufacturer.
P4841P-1R-E57 WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold PVD coating and the WSP45G grade provides a tough, heat‑resistant cutting edge for reliable drilling and boring in steel, stainless steel and high‑temperature alloys; paired with the 1R‑E57 chipbreaker it ensures controlled chip formation and stable cutting. Order directly via Metav Werkzeuge or request application advice from our consultants for optimal integration. P4841P-1R-E57 WSP45G Drilling/Boring Indexable Insert — Tiger·tec Gold, Walter Tools The P4841P-1R-E57 WSP45G is a coated indexable insert engineered for drilling and boring operations on steel, stainless steel and heat‑resistant superalloys. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys 1R‑E57 chipbreaker for stable chips Coated carbide for extended tool life High-output machining with predictable edge stability The combination of the Tiger·tec Gold coating and the WSP45G grade is engineered to deliver a balance of toughness and thermal resistance that supports sustained metal removal rates. The PVD coating reduces flank wear and improves heat tolerance, which contributes to a stable cutting edge under intermittent and continuous engagement. For production environments this means fewer unplanned tool changes and a more predictable machining cycle, improving overall throughput and process reliability. Consistent chip control across mixed materials An optimised 1R‑E57 chipbreaker design controls chip formation and evacuation for a broad range of alloys. In practice, the chip geometry produced by this insert reduces the risk of chip re-cutting and tool damage during drilling and boring passes. For components that require consistent surface quality and repeatable dimensions, the improved chip control promotes cleaner holes and reduces secondary operations caused by poor chip behaviour. Durability that reduces changeover frequency Manufactured from coated carbide, the insert is aimed at extended tool life while machining demanding materials. The WSP45G grade is formulated for toughness, helping to resist chipping on interrupted cuts and during tool entry and exit. When machining stainless steels and heat‑resistant alloys, the insert’s construction mitigates edge breakdown, which lowers maintenance effort and contributes to predictable tool life in serial production. Practical selection and application guidance The insert is classified for material groups P / M / S (steel, stainless steel and heat‑resistant superalloys/titanium) according to ISO conventions, making it a versatile choice for mixed‑material production runs. For best results match the insert geometry to a compatible drilling or boring holder and establish cutting parameters that reflect the workpiece material and machine rigidity. Where process windows are narrow, pairing the insert with appropriate coolant strategy and moderate feed rates will often deliver the best compromise between tool life and productivity. For tailored application recommendations or to source Walter Tools Tiger·tec Gold inserts such as the P4841P‑1R‑E57 WSP45G, contact Metav Werkzeuge for direct advice and rapid supply. Technical data SKU: P4841P-1R-E57-WSP45G-WALTER Designation: P4841P-1R-E57 WSP45G Product type: Drilling/Boring indexable insert Manufacturer: Walter Tools Facts Material groups: P / M / S Chipbreaker: 1R‑E57 Grade / coating: WSP45G (Tiger·tec Gold) Series: Tiger·tec Gold Special features Coated carbide (PVD) Suitable for steel, stainless steel and superalloys/titanium Optimised chip control for drilling and boring Stable cutting edge and consistent productivity FAQ Which materials are suitable for this insert? The P4841P‑1R‑E57 WSP45G insert is suitable for materials grouped as P, M and S — covering steel, stainless steel and heat‑resistant superalloys/titanium — and is designed to handle the specific thermal and mechanical demands of these groups. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on the WSP45G grade improves thermal resistance and reduces flank wear, which results in longer service life and greater process stability when machining demanding alloys. How does the 1R‑E57 chipbreaker improve drilling operations? The 1R‑E57 chipbreaker promotes controlled chip formation and reliable evacuation during drilling and boring, reducing the risk of re‑cutting and improving hole quality and dimensional repeatability. Is the insert suitable for interrupted cuts or entry/exit conditions? Yes, the WSP45G grade is formulated for toughness and edge stability, making it appropriate for interrupted cuts and the entry/exit phases common in drilling and boring operations. What should be considered when integrating the insert into a toolholder? Match the insert geometry to a compatible drilling/boring holder and select cutting parameters that reflect machine rigidity and workpiece material; fine‑tuning feed and coolant will help achieve the expected tool life and surface finish. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841P-1R-F57 WKP35S Wendeplatten - Walter Tools
High-performance Tiger·tec Silver coating and the WKP35S grade provide extended tool life and consistent chip control; the 1R‑F57 chipbreaker ensures predictable swarf formation in mixed production runs. Order the P4841P-1R-F57 WKP35S directly via Metav Werkzeuge or consult the technical team for application advice. P4841P-1R-F57 WKP35S — drilling/boring indexable insert for steel and cast iron | Walter Tools The P4841P-1R-F57 WKP35S is a drilling/boring indexable insert engineered for high-productivity machining of steel and cast iron, combining a coated carbide grade with a chipbreaker designed for stable cutting performance. Tiger·tec Silver coating for extended tool life WKP35S substrate for reliable wear resistance 1R‑F57 chipbreaker for controlled chip formation Proven coating and grade for longer tool life The combination of Tiger·tec Silver coating and the WKP35S coated carbide grade is optimised for the thermal and abrasive demands of machining steel and cast iron (ISO groups P and K). The coating enhances thermal resistance and reduces adhesion, which leads to improved edge stability and prolonged service intervals. In practice, this means fewer insert changes and more consistent production output, particularly where heat generation and intermittent cutting conditions would otherwise accelerate wear. Predictable chip control for safer, faster machining The 1R‑F57 chipbreaker is designed to shape and break chips reliably during drilling and boring operations, reducing the risk of long swarf and improving evacuation from the hole. Controlled chip formation lowers the chance of re-cutting and associated surface damage, so the insert supports a steady cycle time and better surface quality. For operators less familiar with chipbreaker terminology: a chipbreaker is a groove or geometry that alters the chip flow to produce short, manageable segments. Integration benefits and economic impact As an indexable insert for drilling and boring applications, the design facilitates quick index changes and consistent performance across batches. The resulting reduction in downtime and tooling consumption contributes to lower overall machining costs and higher process reliability. Where mixed material runs are common, the grade’s broad applicability to P (steel) and K (cast iron) materials simplifies inventory and tooling planning, supporting a more economic and flexible production strategy. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to specify the P4841P-1R-F57 WKP35S for the next production cycle. Technical data Article number: P4841P-1R-F57-WKP35S-WALTER Designation: P4841P-1R-F57 WKP35S Product type: drilling/boring indexable insert Brand: Walter Tools Facts ISO material groups: P, K Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 1R‑F57 Special features Coated carbide (WKP35S) Suitable for steel and cast iron machining Designed for stable chip formation and improved edge life FAQ What materials is this insert suitable for? The P4841P-1R-F57 WKP35S is suitable for ISO groups P and K, i.e. steel and cast iron, thanks to the Tiger·tec Silver coating and WKP35S grade. How does the 1R‑F57 chipbreaker improve machining? The 1R‑F57 chipbreaker shapes chips into short segments for reliable evacuation, which reduces re-cutting and improves surface finish when machining with this Walter Tools insert. Is the WKP35S grade coated or uncoated? WKP35S is a coated carbide grade within the Tiger·tec Silver series, offering enhanced thermal resistance and wear performance. Can this insert reduce tooling costs in batch production? Yes; the extended tool life and broad material applicability of the P4841P-1R-F57 WKP35S lower insert consumption and simplify tooling inventories, improving overall cost efficiency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original and factory-new.
P4841P-1R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WSP45G grade delivers a durable, heat‑resistant cutting edge and reliable chip control for drilling and boring operations; enhanced tool life and consistent results support productive machining. Order the P4841P‑1R‑F57 WSP45G insert directly via Metav Werkzeuge or consult the team for application advice. P4841P‑1R‑F57 WSP45G drilling/boring indexable insert by Walter Tools — Tiger·tec Gold, 1R‑F57 chipbreaker P4841P‑1R‑F57 WSP45G is an indexable insert engineered for drilling and boring tasks, optimised for machining Stahl, rostfreier Stahl and heat‑resistant alloys. Tiger·tec Gold PVD coating for long life Versatile WSP45G grade for P / M / S applications 1R‑F57 chipbreaker for stable chip formation Designed for demanding drilling and boring operations Improved productivity through a tougher coating The Tiger·tec Gold PVD coating and the WSP45G carbide composition combine to reduce flank wear and withstand elevated temperatures during interrupted cutting. This results in longer tool life and fewer insert changes, which directly improves process uptime. The coated substrate is specifically developed to handle the thermal and mechanical loads typical of drilling and boring, meaning that the insert offers consistent cutting performance even under challenging feeds and depths. Precise chip control for safer, cleaner machining The 1R‑F57 chipbreaker is engineered to promote predictable chip formation during holemaking. By controlling chip flow and breaking long swarf into manageable segments, the insert reduces the risk of chip entanglement and improves surface finish. The controlled chip geometry also minimises the chance of built‑up edge formation on the cutting face, supporting repeatable hole quality and lowering the need for secondary operations. Broad material capability with application clarity Rated for P / M / S groups, the insert is suitable for machining Stahl, rostfreier Stahl and high‑temperature superalloys including titanium. The WSP45G grade is a tough, PVD‑coated carbide optimised for demanding milling and drilling regimes where stable edge life and good wear resistance are required. For users transitioning between materials, the insert’s versatility helps to reduce tooling complexity and inventory variety while keeping machining parameters within a practical window for productive cycles. For reliable holemaking performance with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for stock availability and machining recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P4841P-1R-F57-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841P-1R-F57 WSP45G Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Brand: Walter Tools Grade: WSP45G Series: Tiger-tec Gold Chipbreaker: 1R-F57 Material groups: P / M / S Designation: P4841P-1R-F57 ISO designation: P4841P-1R-F57 WSP45G UID: P4841P-1R-F57-WSP45G-WALTER Facts Chipbreaker designation: 1R-F57 Series designation: Tiger·tec Gold Special features PVD-coated carbide grade Suitable for Stahl machining Suitable for rostfreier Stahl machining Suitable for heat-resistant superalloys and titanium Designed for drilling and boring applications Walter Tools quality and process reliability FAQ What materials is this insert intended for? The P4841P‑1R‑F57 WSP45G insert from Walter Tools is specified for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (group S), providing versatility across common holemaking applications. What advantage does the Tiger·tec Gold series offer? Tiger·tec Gold PVD coating enhances thermal stability and wear resistance, so inserts like WSP45G yield longer life and more consistent performance in demanding drilling and boring cycles. How does the 1R‑F57 chipbreaker affect machining? The 1R‑F57 geometry supports controlled chip breaking and evacuation during drilling, improving surface finish and reducing the risk of chip-related interruptions. Is the insert suitable for interrupted cuts or difficult feeds? Yes; the WSP45G grade and Tiger·tec Gold coating are designed to handle the stresses of interrupted cutting and higher thermal loads commonly encountered in holemaking. How does this insert support process reliability? By combining a robust grade with a proven chipbreaker form and a heat‑resistant coating, the insert delivers repeatable edge life and stable cutting behaviour, which helps maintain consistent production quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the referenced brands. The described item is an original, factory‑new product from the manufacturer.
P4841P-2R-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coated carbide grade, optimised 2R‑A57 chipbreaker geometry, and compatibility with both steel and cast iron for steady machining performance. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and stock availability. P4841P-2R-A57 WKP25S drilling/bore indexable insert — Tiger‑tec Silver, for steel and cast iron — Walter Tools The P4841P-2R-A57 WKP25S is a precision drilling/boring indexable insert designed for productive metalcutting in steel and cast iron applications. Tiger‑tec Silver coating for long life WKP25S coated carbide grade Optimised chip control with 2R‑A57 geometry Suited to steel and cast iron machining Boosted throughput with predictable tool performance The insert’s combination of Tiger‑tec Silver coating and the WKP25S carbide grade delivers higher process reliability and extended tool life under typical steel and cast iron conditions. The coating reduces flank wear and improves resistance to thermal and abrasive loading, which translates into longer intervals between index changes and fewer unexpected stoppages. For production environments this results in a more consistent cycle time and simplified tool inventory management, supporting continuous, high‑output machining. Precise chip control for stable machining and surface finish The 2R‑A57 chipbreaker geometry (angle 57°) is engineered to produce short, manageable chips on both unalloyed and alloyed steels as well as abrasive cast irons. Clear chip formation reduces the risk of recutting and tool interference, supporting stable cutting conditions and improved surface integrity of workpieces. In practice, the geometry helps maintain repeatable component quality during series production and aids coolant penetration to the cutting zone for consistent temperature control. Application overview and process guidance Designed for use in standard drilling and boring toolholders, this insert is intended for operations on materials classified under ISO group P (steel) and K (cast iron). As a coated carbide grade, it is suited to typical machining speeds and feeds used for these families of materials; the coating supports short to medium engagement times common in production runs. For best results, select toolholder geometry that secures the insert firmly and apply cutting parameters matched to the workpiece grade and machine rigidity to exploit the insert’s stability and wear resistance. Economic advantages and brand reliability Using a robust indexable insert such as this reduces tooling change frequency and improves overall equipment effectiveness through fewer interruptions. The blend of a modern coating technology and a production‑oriented carbide sort aims to deliver consistent performance and good value across a wide range of components. Backed by the manufacturing standards associated with Walter Tools, the insert supports reproducible machining outcomes and straightforward grade assignment in organised toolrooms. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss integrating Tiger‑tec Silver inserts into existing tool cycles Technical Data Article number: P4841P-2R-A57-WKP25S-WALTER Product name: Bohr-/Aufbohrwendeschneidplatte P4841P-2R-A57 WKP25S Walter Tools Manufacturer: Walter Tools Product type: Drilling/boring indexable insert Grade/series: WKP25S / Tiger‑tec Silver Facts Cutting geometry: 2R‑A57 Angle: 57° Material groups: P (steel), K (cast iron) Material of insert: Coated carbide Special features Coating technology: Tiger‑tec Silver Chipbreaker form: 2R‑A57 Suitability: Steel machining, Cast iron machining Series characteristics: stable chip formation, productive cutting behaviour FAQ What materials is this insert suitable for? The P4841P-2R-A57 WKP25S insert is suited for ISO group P (steel) and K (cast iron), combining a WKP25S coated carbide grade with Tiger‑tec Silver for abrasion and heat resistance. Which chipbreaker geometry does the insert use and what is the benefit? The insert features the 2R‑A57 chipbreaker (57°), which promotes short, controlled chips and improved surface quality during drilling and boring in steel and cast iron. Is the insert compatible with standard drilling toolholders? Yes, the P4841P-2R-A57 WKP25S is designed for use in conventional drilling and boring indexable toolholders; correct clamping and matched cutting parameters are advised for optimal performance. How does the Tiger‑tec Silver coating influence tool life? Tiger‑tec Silver provides increased wear resistance and thermal stability, helping to extend index life and maintain consistent cutting results over longer production runs. The Walter AG (brand: Walter Tools) is part of the Sandvik Group and is recognised for precision tooling and reliable machining solutions. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanation only and does not indicate any affiliation. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
P4841P-2R-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S coated-carbide grade and the 2R-A57 chipbreaker for reliable chip control and extended tool life; intended for machining steel and cast iron. Order the insert directly via Metav Werkzeuge or consult the team for application advice. P4841P-2R-A57 WKP35S drilling/boring indexable insert, Tiger·tec Silver – Walter Tools P4841P-2R-A57 WKP35S is an indexable insert developed for drilling and bore-enlarging operations in steel and cast iron, combining a coated-carbide substrate with a geometry optimised for controlled chip formation. Tiger·tec Silver coating for long tool life Grade WKP35S, coated carbide Optimised for steel and cast iron Chipbreaker 2R-A57 for reliable chip control Enhanced lifetime through advanced coating and substrate The insert is built on a coated carbide substrate from the Tiger·tec Silver family, which provides enhanced wear resistance under the thermal and mechanical loads typical of machining steel and cast iron. The WKP35S grade is a coated hardmetal designed to balance toughness and hardness; this combination reduces flank and crater wear, which translates into longer tool life and fewer indexings. For production environments where predictable tool behaviour is essential, the coating technology helps maintain cutting edge stability across varied workpiece batches. Predictable chip control and process stability A decisive asset of this geometry is the 2R-A57 chipbreaker, engineered to produce short, controllable chips in both ISO P (steel) and ISO K (cast iron) applications. Controlled chip formation reduces the risk of interrupted cuts and machine stoppages, supporting higher average cutting speeds and improved cycle-time consistency. The geometry also contributes to stable cutting forces, which helps preserve the machine spindle and workpiece accuracy — a critical factor in series production and tight-tolerance machining. Application scope and practical benefits in the workshop Rated for machining under the ISO groups P and K, this insert suits tasks where mixed batches of unalloyed or alloyed steel and cast iron are processed. The coated grade is intended for a broad material coverage, offering an economical choice when one insert must cover several workpiece types. In practice, that means fewer tool changes and simplified tool stock management, supporting higher machine availability and lower handling overhead. When selecting holders and feeds, pair the insert with stable clamping and ensure recommended coolant or high-pressure strategies are assessed with the machine tool vendor. Integration, handling and selection advice As an indexable solution, the insert requires the correct pocket and clamping torque to achieve the promised performance; incorrect seating can affect runout and surface finish. For new setups, verify the holder compatibility and, if possible, perform a short trial under representative cutting conditions to confirm expected chip form and tool life. The P4841P-2R-A57 WKP35S designation helps ensure the correct insert geometry and grade are ordered; for tailored advice on holders or cutting data, Metav Werkzeuge can provide application support and recommendations based on production constraints. Contact Metav Werkzeuge for holder and application advice for the Walter Tools P4841P-2R-A57 WKP35S insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: P4841P-2R-A57-WKP35S-WALTER ISO designation: P4841P-2R-A57 WKP35S Product type: drilling/boring indexable insert Grade: WKP35S Series: Tiger·tec Silver Facts No numerical specifications provided in source data Special features Coated carbide grade WKP35S Chipbreaker geometry 2R-A57 Suitable for ISO P (steel) and ISO K (cast iron) Designed for stable chip formation and productive machining Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P4841P-2R-A57 WKP35S insert is specified for steel and cast iron applications (ISO groups P and K), reflecting the design intent of the WKP35S coated-carbide grade. What does the Tiger·tec Silver designation mean for performance? Tiger·tec Silver denotes the coating and substrate technology used on the Walter Tools insert, providing enhanced wear resistance and a balance between toughness and hardness for prolonged tool life. How does the 2R-A57 chipbreaker affect machining? The 2R-A57 chipbreaker is designed to produce short, controllable chips in both steel and cast iron, improving process stability and reducing the chance of chip-related interruptions. Is the insert suitable for high-speed cutting? The WKP35S coated-carbide combination and Tiger·tec Silver technology support productive cutting conditions; actual speed suitability depends on machine capability, cooling strategy and workpiece specifics. How should the insert be mounted and checked before use? Seat the insert squarely in the correct holder pocket and apply the specified clamping torque; check for runout and perform a short trial cut to confirm chip form and surface finish with the P4841P-2R-A57 WKP35S insert. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, brand-new merchandise from the manufacturer.
P4841P-2R-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life and reliable chip control for more productive drilling and boring operations; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. P4841P-2R-A57 WSP45G indexable drilling/reaming insert — Tiger·tec Gold grade for steel, stainless steel and superalloys (Walter Tools) A P4841P-2R-A57 WSP45G indexable insert engineered for robust drilling and boring in demanding materials, offering high edge stability and reproducible performance Tiger·tec Gold PVD coating for extended tool life Universal grade for Steel, Stainless and Superalloys 2R‑A57 chipbreaker for stable chip formation Outstanding wear resistance and reliable edge life for high-output machining The WSP45G cutting grade, part of the Tiger·tec Gold series, is a PVD‑coated cemented carbide designed to deliver a balance of toughness and heat resistance. In drilling and reaming cycles where temperatures at the cutting edge rise rapidly, the PVD coating reduces flank wear and protects the carbide substrate, which translates into longer service intervals and fewer index changes. This capability is particularly important when machining steel and stainless steel, where consistent heat management prevents premature chipping and reduces the risk of built‑up edge. The insert’s composition supports a reproducible cutting edge, aiding predictable tool life and process planning. Stable chip control and improved surface quality through optimised geometry Equipped with the 2R‑A57 chipbreaker, the insert promotes controlled chip formation in interrupted and continuous cuts, reducing the likelihood of entangling or stringy chips that slow cycle times. Stable chip evacuation results in fewer rework operations and enhanced bore surface integrity, which benefits downstream processes such as honing or assembly. The insert geometry and grade combination minimise vibration and support steady cutting forces, helping maintain dimensional accuracy during serial production. These aspects make the component a pragmatic choice for operations that prioritise throughput and consistent part finish. Versatile application scope and process guidance for best results Rated for machining groups P / M / S (unalloyed and alloyed steel, stainless steel, and heat‑resistant superalloys/titanium), the insert suits a broad range of workshop and production scenarios. As an indexable insert for drilling and boring, it enables fast replacement without reclamping, contributing to reduced downtime. When integrating this grade into a process, select cutting parameters that reflect material thermal behaviour: lower feed per rev for tough alloys and moderated cutting speeds for stainless grades to avoid workhardening. For customers seeking tailored parameter sheets or batch availability, technical consultation ensures the insert is matched to machine power, spindle stability and coolant strategy. For machining operations that require consistent edge stability and controlled chips, contact Metav Werkzeuge for availability and process advice — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data Article number / SKU: P4841P-2R-A57-WSP45G-WALTER Product type: Indexable drilling/reaming insert Designation: P4841P-2R-A57 Full ISO designation: P4841P-2R-A57 WSP45G Manufacturer: Walter Tools Facts Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 2R‑A57 Suitable material groups: P / M / S Special features PVD-coated cemented carbide grade Designed for drilling and boring operations Promotes stable chip formation and consistent edge life Broad material coverage: steel, stainless steel, superalloys/titanium FAQ What materials is this insert suitable for? The P4841P-2R-A57 WSP45G from Walter Tools is specified for machining P / M / S materials — i.e. unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys/titanium. What does the WSP45G grade offer compared with uncoated grades? WSP45G is a PVD‑coated Walter Tools grade in the Tiger·tec Gold family; it provides enhanced wear resistance and heat protection compared with uncoated carbide, improving lifetime under elevated cutting temperatures. When is the 2R‑A57 chipbreaker preferable? The 2R‑A57 chipbreaker is tailored to produce short, controllable chips in drilling and boring tasks, supporting safe evacuation and better bore surface quality when used with the appropriate cutting parameters. Can the insert be used for serial production on CNC machines? Yes. The P4841P-2R-A57 WSP45G insert is designed for reproducible performance and is suitable for serial production when combined with appropriate feeds, speeds and coolant strategies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification and identification only; there is no affiliation between Metav Werkzeuge and the referenced brands. The offered article is an original, factory‑new product from the stated manufacturer.
P4841P-2R-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, predictable edge life and reliable chip control for uninterrupted drilling and reaming operations; order directly via Metav Werkzeuge or contact our application consultants for tailored cutting data. P4841P-2R-E57 WKP25S — Drilling/reaming indexable insert, Tiger‑tec Silver coating, for Steel & Cast iron (Walter Tools) The P4841P-2R-E57 WKP25S is a coated carbide indexable insert from the Tiger‑tec Silver series, engineered for drilling and reaming tasks in steel and cast iron, delivering consistent performance in demanding production environments Tiger‑tec Silver coating for enhanced wear resistance WKP25S grade optimised for steel and cast iron 2R‑E57 chipbreaker for controlled chip formation Consistent edge life for productive machining Increased tool life through advanced coating technology The Tiger‑tec Silver coating used on this insert is formulated to resist abrasive and adhesive wear during heavy machining cycles. As a coated carbide grade, WKP25S combines a hard substrate with a specialised surface layer to reduce flank and crater wear, which in turn prolongs the interval between index changes. For production-oriented shops, this translates into fewer tool changes, more uptime and steadier cycle times. The technical integration of a surface treatment specifically designed for the thermal and mechanical loads of drilling and reaming ensures repeatable performance across batches. Reliable chip control and safer metalworking processes The 2R‑E57 chipbreaker geometry focuses on predictable chip formation when machining steel (P) and cast iron (K). A controlled chip flow reduces the risk of long, tangled swarf and lowers tool vibration during cutting, improving hole quality and surface integrity. The insert geometry also eases swarf evacuation in drilled holes, which benefits tool stability and reduces the chance of workpiece damage. For CNC machinists and job-shop professionals, better chip control leads to higher first-pass yields and a reduction in secondary operations. Productivity benefits and application guidance for daily use Designed for productive machining, this insert supports consistent cutting-edge life and repeatability in serial production. The combination of a robust substrate and the Tiger‑tec Silver surface enables effective heat management and wear resistance in common ferrous materials, reducing unplanned stoppages. Specification and tooling decisions are simplified by the clear material-group suitability (steel and cast iron), allowing planners to standardise on grades that fit a wide range of parts. For tailored feed and speed recommendations, Metav Werkzeuge can provide application-specific data to optimise cycle time and component finish. For application advice on Walter Tools indexable inserts such as the P4841P-2R-E57 WKP25S, or to discuss matching inserts to specific materials and machines, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for customised recommendations Technical Data SKU: P4841P-2R-E57-WKP25S-WALTER Designation: P4841P-2R-E57 WKP25S Product type: Drilling/reaming indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Grade: WKP25S Chipbreaker: 2R‑E57 Material groups: P / K (steel / cast iron) Coating: Tiger‑tec Silver Special features Coated carbide construction Optimised for drilling and reaming operations Stable chip formation and evacuation Designed for productive, repeatable machining FAQ What materials is this insert suitable for? The P4841P-2R-E57 WKP25S is specified for the ISO material groups P and K, which means it is suitable for steel and cast iron applications. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP25S grade reduces abrasive and adhesive wear, improving cutting-edge life and enabling steadier machining in demanding drilling and reaming cycles. What benefit does the 2R‑E57 chipbreaker provide during drilling? The 2R‑E57 chipbreaker promotes predictable chip fragmentation and controlled evacuation, which enhances hole quality and reduces the risk of swarf-related interruptions. Is this insert intended for serial production or single-part machining? Designed with a focus on productive machining, the insert provides consistent edge life and repeatability that supports serial production and frequent machining runs. The Walter AG (trading as Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
P4841P-2R-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of proven coating technology and broad material capability to achieve stable chip control and extended tool life in drilling and boring operations; order originals via Metav Werkzeuge or consult our specialists for application-specific advice. P4841P-2R-E57 WKP35S drill/boring indexable insert — Tiger·tec Silver coating, for steel and cast iron | Walter Tools The P4841P-2R-E57 WKP35S is a coated drill/boring indexable insert designed for high‑productivity machining of steel and cast iron in serial production environments. Tiger·tec Silver coated carbide for long life Suitable for steel and cast iron Stable chip formation for consistent results Compatible with standard drill geometries Consistent cutting performance for steel and cast iron The insert combines the Tiger·tec Silver coating with a WKP35S coated‑carbide grade to deliver thermal stability and wear resistance under the typical temperatures encountered when machining steel and cast iron. The chemical and mechanical design of the grade supports stable edge life, which reduces tool changes and helps maintain repeatable part quality. For shops seeking an efficient balance between productivity and predictable maintenance intervals, this solution reduces process variation and supports continuous operation. Predictable chip control to reduce downtime Equipped with the 2R‑E57 chipbreaker geometry, the insert promotes controlled chip formation and evacuation when used in drilling and boring tool bodies. Controlled chips lower the risk of interruptions from entanglement or recuts and contribute to a better surface condition on the workpiece. The result is fewer stoppages for cleaning or part rework and a steady machining rhythm that increases net output per shift. This functional design is particularly valuable where cycle time and machine utilisation are primary KPIs. Practical integration and application guidance for production The geometry and specification make the insert straightforward to integrate into existing drilling and boring tool assemblies that accept this form factor. Its focus on steel and cast iron applications simplifies tool selection for mixed production runs. Where toolholder selection or coolant strategy needs confirmation, Metav Werkzeuge offers application consultancy to match holder geometry and cutting data for optimum results. The combination of a robust grade and a high‑performance coating supports a cost‑effective machining strategy in high‑volume environments while maintaining component consistency. Choose the Walter Tools Tiger‑tec Silver WKP35S insert for proven productivity — contact Metav Werkzeuge for tailored advice or to check current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P4841P-2R-E57-WKP35S-WALTER SKU: P4841P-2R-E57-WKP35S-WALTER Description: Drill/boring indexable insert P4841P-2R-E57 WKP35S Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts No additional numerical data provided Special features Coating: Tiger·tec Silver Grade material: coated carbide (WKP35S) Material suitability: steel (P) Material suitability: cast iron (K) Chipbreaker: 2R‑E57 Product type: drill/boring indexable insert FAQ What materials is this insert intended for? The P4841P-2R-E57 WKP35S insert is specified for machining steel and cast iron, with the grade and coating tuned to those ISO material groups. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, extending tool life and helping to maintain consistent cutting performance during longer cycles. How does the 2R‑E57 chipbreaker affect machining? The 2R‑E57 chipbreaker promotes controlled chip formation and evacuation in drilling and boring operations, reducing the likelihood of chip interference and supporting stable surface finish. Is this insert suitable for stainless steel? Stainless steel suitability is not indicated for this grade; the insert is optimised for steel and cast iron applications as specified. Can this insert be used in standard drilling toolholders? Yes — the geometry is compatible with common drilling and boring assemblies that accept this indexable insert form; confirm seat and clamping specifications with the chosen toolholder. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
P4841P-2R-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and versatile P / M / S material compatibility to keep machining processes productive and predictable; order the insert directly via Metav Werkzeuge or consult our technicians for application-specific recommendations. P4841P-2R-E57 WSP45G drilling/boring indexable insert by Walter Tools — Tiger·tec Gold PVD, 2R-E57 chipbreaker A P4841P-2R-E57 WSP45G indexable cutting insert engineered for drilling and boring applications, providing enhanced edge stability and predictable chip formation across a wide range of materials Tiger·tec Gold PVD coating for long tool life Indexable insert for drilling and boring operations Stable cutting edge for Stahl and rostfreier Stahl Suited to heat-resistant alloys and titanium Durable coating for extended productivity The combination of the Tiger·tec Gold technology and a PVD-coated cemented carbide substrate delivers a tangible increase in tool life and process reliability. The coated carbide resists abrasive wear and thermal degradation during interrupted cuts, which means fewer index changes and longer uninterrupted production runs. This results in measurable productivity gains in setups where consistent cycle times are required and reduces the frequency of tool handling and machine downtime. Predictable chip formation and dimensional consistency Equipped with the 2R-E57 chipbreaker geometry, the insert supports stable chip control and reliable evacuation during drilling and boring operations. The chipformer geometry is optimised to manage the typical heat and deformation behaviours of both Stahl and rostfreier Stahl, lowering the risk of built-up edge and improving surface finish. For process planners this translates into more consistent hole tolerances and fewer rework cycles when component accuracy is a priority. Broad material range with high thermal stability The substrate and coating combination is tailored to the P / M / S ISO groups, making the insert suitable not only for unalloyed and alloyed steels but also for tougher materials such as rostfreier Stahl and heat-resistant superalloys or titanium. The grade WSP45G is formulated as a tough, versatile option optimised for milling-style demands adapted here for drilling/boring, offering a balance between wear resistance and edge strength; this allows confident application in mixed-production environments and in shops where single-tool flexibility reduces tool inventory. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts and to discuss the P4841P-2R-E57 WSP45G for specific machining tasks — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: P4841P-2R-E57-WSP45G-WALTER Article designation: P4841P-2R-E57 WSP45G Product type: drilling/boring indexable insert Manufacturer: Walter Tools Grade/series: Tiger·tec Gold / WSP45G Chipbreaker: 2R-E57 Facts Material groups: P / M / S Coating: PVD (Tiger·tec Gold) Substrate: coated cemented carbide Suitable applications: drilling, boring Special features Tough, versatile PVD-coated grade Optimised chip control geometry Stable cutting edge for mixed materials Designed for reduced tool change frequency FAQ What materials can the insert machine? The P4841P-2R-E57 WSP45G is suitable for material groups P, M and S, meaning it is designed for Stahl, rostfreier Stahl and heat-resistant superalloys including titanium. Is this insert intended only for milling? Although the WSP45G grade is commonly used in milling, the P4841P-2R-E57 geometry is configured for drilling and boring indexable applications and benefits from the same Tiger·tec Gold wear performance. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold’s PVD layers enhance wear resistance and thermal stability, which for the P4841P-2R-E57 WSP45G reduces flank and crater wear and extends the effective life of the insert on demanding operations. Can the insert help with chip evacuation in deep holes? The 2R-E57 chipbreaker supports controlled chip formation and evacuation; while chip flow also depends on toolholder, coolant and process parameters, the insert’s geometry is designed to improve predictability in drilling and boring. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841P-2R-F57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of durable coated carbide, proven chip control and versatile material capability for steady production. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. P4841P-2R-F57 WKP35S indexable insert (Drilling/Boring) – for steel and cast iron | Walter Tools A P4841P-2R-F57 WKP35S indexable insert engineered for high-productivity drilling and bore-enlargement, optimised for machining steel and cast iron. Tiger·tec Silver coating for long tool life Optimised for steel and cast iron machining Coated carbide grade WKP35S for abrasion resistance Stable chip control with 2R-F57 chipbreaker Longer tool life through advanced coating technology The combination of Tiger·tec Silver surface engineering and the WKP35S grade provides a balanced solution between wear resistance and toughness. The coated carbide composition reduces abrasive wear during interrupted cuts and under elevated temperatures common in drilling operations, which translates into fewer tool changes and lower production downtime. This performance-oriented coating technology is selected specifically to extend cutting edge life while maintaining dimensional stability during series production. Consistent chip formation and improved machining reliability Equipped with the 2R-F57 chipbreaker geometry, the insert ensures predictable chip breaking and evacuation in both through-hole drilling and bore finishing situations. Stable chip control reduces the risk of re-cutting and tool clogging, improving cycle time reliability. The geometry and coating work together to moderate cutting forces and heat generation, which results in reliable hole quality and reproducible process parameters across batches. Suited for steel and cast iron applications with ISO guidance The insert is specified for material groups P (steel) and K (cast iron) in line with ISO 513 designations, reflecting its adaptability to the typical thermal and mechanical demands of these workpiece families. For users transitioning between unalloyed, alloyed steels and a range of cast irons, the WKP35S grade offers a pragmatic compromise: sufficient toughness for interrupted cuts in steel and enhanced abrasion resistance for abrasive cast-iron compounds. This makes the insert suitable for mixed-production environments where flexibility is essential. Easy integration into existing tooling systems and workflows As an indexable cutting insert, the P4841P-2R-F57 design simplifies stock keeping and reduces setup time compared with solid tools. Insert changeover is fast, and the standardised geometry allows integration into common drilling and boring toolholders. The result is an economical solution for workshops and production lines aiming to increase uptime and reduce tooling complexity while keeping surface finish and hole tolerance within reliable limits. The product supports process stability and helps streamline maintenance intervals. For application advice or to equip production with the Walter Tools WKP35S grade insert, contact Metav Werkzeuge for tailored recommendations and ordering support. Technical data Article number: P4841P-2R-F57-WKP35S-WALTER Item designation: P4841P-2R-F57 WKP35S Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Chipbreaker: 2R-F57 Material grade: P / K Facts SKU: P4841P-2R-F57-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841P-2R-F57 WKP35S Walter Tools Special features Coated carbide cutting grade WKP35S Optimised for steel (P) and cast iron (K) Tiger·tec Silver coating technology Stable chip control geometry Suitable for drilling and bore-enlargement operations FAQ What materials is this insert intended for? The P4841P-2R-F57 WKP35S insert is intended for machining steel (P) and cast iron (K) as designated by ISO 513, offering a balance of toughness and abrasion resistance. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WKP35S grade increases wear resistance and reduces thermal impact at the cutting edge, which helps extend insert life and maintain consistent hole quality under industrial conditions. What role does the 2R-F57 chipbreaker play? The 2R-F57 chipbreaker provides controlled chip formation and evacuation, reducing the chance of chip-related interruptions and supporting stable cycle times for drilling and boring tasks. Is this insert compatible with standard toolholders? The insert’s geometry is designed for use in compatible indexable drilling and boring holders; compatibility should be verified against the specific toolholder dimensions and clamping system in use. Can the insert be used for interrupted cuts and varying feed rates? Yes, the WKP35S grade and coating combination offers sufficient toughness for interrupted cuts and adapts to a range of feed rates commonly used in industrial drilling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no commercial affiliation implied between our company and the named manufacturers. The offered item is original, factory-new goods from the manufacturer.
P4841P-2R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
High-performance machining without compromise: the combination of Tiger‑tec Gold PVD technology and the WSP45G grade delivers extended tool life and consistent chip control across demanding materials. Order the insert directly via Metav Werkzeuge or ask our consultants for process support to achieve reliable production results. P4841P-2R-F57 WSP45G — Drill/Reaming Indexable Insert, Tiger‑tec Gold, 2R‑F57 chipbreaker (Walter Tools) A P4841P-2R-F57 WSP45G indexable insert designed for drilling and reaming tasks, engineered to machine Stahl, rostfreier Stahl and high‑temperature superalloys with a robust chipbreaker Tiger‑tec Gold PVD coating for long life WSP45G grade for tough, versatile performance 2R‑F57 chipbreaker for secure chip control Suitable for Stahl, rostfreier Stahl and superalloys Maximise uptime with proven coating technology The Tiger‑tec Gold coating combined with the WSP45G grade provides consistent wear resistance and predictable flank behaviour, reducing unplanned tool changes and interruptions. This PVD‑coated carbide insert is formulated to balance toughness and edge stability, meaning the component life is extended under typical drilling and reaming loads. For production environments where cycle time and repeatability matter, the hardwearing surface treatment directly contributes to process reliability and less frequent tool handling. Stable chip formation and secure cutting edge control Thanks to the 2R‑F57 chipbreaker geometry, the insert ensures controlled chip breakage and evacuation during interrupted or continuous cuts. Stable chip control reduces the risk of recutting and surface defects, helping to maintain dimensional accuracy and surface integrity. The engineered chipfloor works particularly well when machining difficult‑to‑cut alloys, ensuring that the cutting edge remains protected and the machining process stays consistent over longer tool life. Broad material capability for diverse production needs The grade is specified for the ISO groups P, M and S, which corresponds to applications in Stahl, rostfreier Stahl and heat‑resistant superalloys and titanium. This broad applicability allows a single tooling solution to cover a range of components, simplifying tool inventory and setups. When a workshop faces mixed batches or changing material lots, the adaptable performance of this insert reduces tool changes while maintaining surface quality and dimensional targets. Productivity and process security in everyday use Designed by a recognised tooling specialist, the insert supports productive metalcutting through a combination of edge stability and versatile substrate behaviour. The geometry and coating reduce edge fractures and nose wear, promoting repeatable hole quality and longer intervals between inspection. For engineering teams seeking dependable, production‑grade tooling, this solution contributes directly to shorter cycle times and consistent output without sacrificing component finish. For application advice, tool recommendations or to request Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for expert consultation and local supply: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Technical data Article number: P4841P-2R-F57-WSP45G-WALTER Designation: P4841P-2R-F57 WSP45G Type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Grade / Series: Tiger‑tec Gold / WSP45G Chipbreaker: 2R‑F57 Material compatibility: P / M / S Facts No measurable numerical data provided in the dataset Special features Coating: Tiger‑tec Gold (PVD technology) Substrate: coated carbide (WSP45G) Application groups: Stahl, rostfreier Stahl, superalloys / titanium Use case: drilling and reaming indexable insert Robust chip control via 2R‑F57 geometry FAQ What materials can be machined with this insert? The P4841P-2R-F57 WSP45G insert is suitable for Stahl, rostfreier Stahl and high‑temperature superalloys (ISO groups P, M, S) as specified by the WSP45G grade. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold PVD coating on the WSP45G grade increases wear resistance and edge stability, which extends tool life and enhances process reliability during drilling and reaming operations. Which chipbreaker does this insert use and why is it important? The insert features the 2R‑F57 chipbreaker, designed to produce short, controllable chips and support secure chip evacuation—critical for maintaining hole quality and preventing recutting. Is this insert suitable for interrupted cuts or difficult geometries? Yes, the combination of WSP45G substrate properties and the 2R‑F57 chipbreaker provides toughness and stability that are advantageous for interrupted cuts and complex hole profiles. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the named brand. The offered item is an original, factory‑new product from Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com