RCMT1204M0-HU6 WPP30G Wendeplatten - Walter Tools
Take advantage of a high-performance, Tiger·tec Gold-coated carbide grade that combines durable wear behaviour and consistent chip control for efficient steel machining; order through Metav Werkzeuge or consult the team for application advice. RCMT1204M0-HU6 WPP30G — turning insert for steel machining, Walter Tools A RCMT1204M0-HU6 WPP30G turning insert engineered for productive steel turning operations, featuring Tiger·tec Gold coating and the HU6 chipbreaker for optimised chip formation. Tiger·tec Gold coated carbide grade WPP30G Optimised HU6 chipbreaker for steel chips 7° clearance for reliable cutting geometry Round form 12 for versatile approach angles Boosted productivity through advanced coating and grade The Tiger·tec Gold technology and WPP30G grade deliver a combination of wear resistance and toughness that supports longer tool life and stable cutting conditions. As a coated carbide insert designed for steel applications, it reduces flank wear and preserves edge stability at elevated cutting temperatures. The result is fewer insert changes, more consistent component quality and improved throughput in repetitive turning cycles. Consistent chip control and surface quality The HU6 chipbreaker is optimised for typical chip formation when machining steel, promoting short, controlled chips and stable evacuation. Combined with a 7° clearance angle and the round form, the geometry lowers the risk of built-up edge and contributes to homogeneous surface finish. For operations where reproducible part appearance and reduced secondary finishing are priorities, this insert supports reliable results and shorter total process time. Designed for secure seating and repeatable accuracy Manufactured to tolerance class M and specified as RCMT geometry, the insert fits standard RCMT-style toolholder pockets, ensuring secure clamping and repeatable positioning. The compact plate size (12) and thickness code (04) provide a stable cutting edge and vibration damping in typical lathe setups. This mechanical consistency simplifies tool setup and helps maintain dimensional tolerances across production runs. Economic machining for production environments Targeted at workshops and production lines that machine steel, the insert offers a pragmatic balance between durability and versatility. The coated grade addresses a broad range of steel alloys, offering an economical solution where both uptime and consistent quality matter. For manufacturing teams aiming to reduce process variability and tooling costs per part, the insert supports predictable performance and easier tool management. Contact Metav Werkzeuge for tailored application support and to secure original Walter Tools Tiger·tec Gold turning inserts for reliable steel machining Technical data SKU: RCMT1204M0-HU6-WPP30G-WALTER Article designation: RCMT1204M0-HU6 WPP30G Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Grade: WPP30G Numbers / Core technical data Clearance angle: 7° Plate size: 12 Plate thickness code: 04 Tolerance class: M Special features Tiger·tec Gold coated carbide grade WPP30G HU6 chipbreaker optimised for steel Round plate form for versatile approach angles Suitable for machining steel (P) RCMT geometry for indexed toolholder seating FAQ What materials is this insert primarily intended for? The RCMT1204M0-HU6 WPP30G insert is designed primarily for steel machining (designation P), with the coating and grade optimised for typical heat and chip characteristics of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP30G grade increases wear resistance and thermal stability, allowing longer cutting times and more consistent edge integrity during continuous turning operations. Which chipbreaker should be selected for reliable chip control? The HU6 chipbreaker integrated in this insert was developed to produce short, controllable chips when turning steel, improving evacuation and surface finish during typical lathe cycles. Is this insert compatible with standard RCMT toolholders? Yes, the RCMT designation indicates geometry compatible with RCMT-style indexed turning toolholders, enabling secure seating and repeatable indexing. Walter Tools; Walter AG, Tübingen, Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for clarification only and indicate no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
RCMT1204M0-RK4 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKK10S grade for durable, consistent machining of abrasive cast iron; the RK4 chipbreaker promotes stable chip formation and reduces the risk of rework. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. RCMT1204M0-RK4 WKK10S — indexable turning insert, Tiger·tec Silver for cast iron (Walter Tools) The RCMT1204M0-RK4 WKK10S is an indexable turning insert engineered for cast iron machining, combining a coated-carbide grade with a round geometry to deliver reliable chip control and extended edge life. Tiger·tec Silver coated carbide grade WKK10S Optimised for cast iron machining RK4 chipbreaker for stable chip control Round insert, size 12 with 7° clearance Boosted process stability through coating and geometry The combination of the Tiger·tec Silver technology and the WKK10S grade provides a coated carbide solution aimed at resisting abrasive wear common in cast iron workpieces. The coating reduces flank wear and helps to maintain a consistent cutting edge, which in turn supports repeatable results and longer tool life. By choosing a round geometry, the insert offers dependable edge strength and simple indexability, helping to reduce tool changes and maintain productive cycles. Cleaner machining of cast iron with effective chip control The RK4 chipbreaker is designed for the typical short, brittle chips produced when machining cast iron, promoting predictable breakage and safe evacuation from the cut. This feature reduces the likelihood of chip-related surface defects and minimises operator intervention. In practical terms, improved chip control contributes to lower scrap rates and fewer interruptions, which supports leaner production and better use of machine capacity. Simple integration and handling for workshop efficiency The round insert form and the specified 7° clearance make the component compatible with common clamping systems and stable in turning applications that demand robust edge security. Size designation 12 and thickness 04 align with standard tooling holders for turning operations. Technical teams value the clear match between insert geometry, chipbreaker and the coated grade because it simplifies tooling planning and helps to maintain consistent component quality across batches. Contact Metav Werkzeuge for tailored cutting-parameter recommendations and application advice for the RCMT1204M0-RK4 WKK10S indexable turning insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RCMT1204M0-RK4-WKK10S-WALTER Name: RCMT1204M0-RK4 WKK10S Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 7° Insert shape: Round Insert size: 12 Thickness: 04 Tolerance class: M Special features Chipbreaker: RK4 Grade/coating: WKK10S, coated carbide (Tiger·tec Silver) Application: cast iron Execution: T FAQ Which materials is this insert intended for? The RCMT1204M0-RK4 WKK10S is optimised for machining cast iron, with the grade and chipbreaker tuned for abrasive, short-chip behaviour typical of that material. What does the designation WKK10S indicate? WKK10S denotes a Walter Tools carbide grade within the Tiger·tec Silver coating family designed for wear resistance and broad applicability in cast iron turning. How does the RK4 chipbreaker affect cutting performance? The RK4 chipbreaker promotes short, consistent chips during turning, improving evacuation and reducing chip-related surface marks in cast iron machining. Is the round geometry advantageous for interrupted cuts? The round form increases edge strength and indexability, making it suitable where robustness and repeatable seating of the insert are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1204M0-RK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Silver coating, the WKK20S carbide grade optimised for cast iron and the RK4 chipbreaker for stable chip control — a practical choice for consistent productivity. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. RCMT1204M0-RK4 WKK20S round indexable turning insert — Walter Tools, Tiger-tec Silver, 7° clearance RCMT1204M0-RK4 WKK20S is a round indexable turning insert designed for reliable machining of cast iron components in production environments Tiger-tec Silver coating for wear resistance WKK20S grade, tuned for cast iron machining RK4 chipbreaker for controlled chip formation Round form with 7° clearance for flexible cutting Stable chip control for abrasive cast iron work The combination of the RK4 chipbreaker with the WKK20S grade provides predictable chip formation when machining cast iron, reducing the risk of irregular chips and improving process reliability. The cutting geometry and the round insert shape allow smooth engagement and consistent cutting forces, which helps to avoid unexpected tool behaviour on brittle or abrasive cast materials. The Tiger-tec Silver coating further suppresses abrasive wear, extending usable edge life and maintaining dimensional stability over longer tool cycles. Predictable tool life and process security Coated carbide in the WKK20S formulation delivers a balance between wear resistance and toughness tailored to the demands of cast iron. With tolerance class M and a 7° clearance, the insert supports repeatable seating and reliable edge performance across multiple indexings. These characteristics contribute to lower process variation and reduced setup adjustments, supporting efficient batch production and predictable maintenance intervals. The combination of geometry and coating increases the probability of consistent component quality. Practical fit and handling for series production The RCMT-compatible designation indicates an insert geometry that fits a wide range of standard tool holders engineered for round inserts, making it simple to integrate into existing turning setups without special tooling changes. The insert’s balanced design supports both intermittent and continuous cuts encountered in cast iron workpieces. For application planning, the grade and chipbreaker selection mean fewer process experiments are needed, saving machine time and improving throughput. If additional machining parameters are required for a specific part geometry, technical advice is available to align cutting data with production targets. Contact Metav Werkzeuge today to discuss the RCMT1204M0-RK4 WKK20S insert for cast iron machining and to get tailored recommendations for integration into existing turning operations Technical Data Article number: RCMT1204M0-RK4-WKK20S-WALTER SKU: RCMT1204M0-RK4-WKK20S-WALTER Label: Drehwendeschneidplatte RCMT1204M0-RK4 WKK20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Facts Free angle: 7° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Grade: WKK20S (coated carbide) Chipbreaker: RK4 Plate form: Round Suitability: Cast iron (K) Execution: T FAQ What materials is this insert suited for? The RCMT1204M0-RK4 WKK20S insert is formulated for machining cast iron (workpiece group K) and is optimised for the abrasive and short-chipping behaviour typical of these materials. What advantage does the Tiger-tec Silver series offer? The Tiger-tec Silver coating on the WKK20S grade improves resistance to abrasive wear and supports longer edge life in cast iron applications, increasing process stability during production runs. Which chipbreaker is fitted and what is its benefit? The insert features the RK4 chipbreaker, which promotes controlled, repeatable chip formation in cast iron, reducing the likelihood of entangling or damaging chips and helping to maintain surface quality. How does the insert geometry influence mounting and use? The RCMT designation denotes a round insert geometry compatible with standard round-insert tool holders, offering flexible entry angles and reliable seating for repeated indexing during production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer Walter Tools.
RCMT1204M0-RM4 WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, the wear-resistant Tiger·tec Gold coating and a compact round geometry for consistent results when machining stainless steel; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. RCMT1204M0-RM4 WMP20G turning insert for stainless steel — round insert, 7° clearance | Walter Tools The RCMT1204M0-RM4 WMP20G is a round turning insert engineered for dependable performance in medium to robust stainless steel applications, offering stable chip formation and extended edge life. Tiger·tec Gold coating for extended tool life Optimised for stainless steel machining RM4 chipbreaker for stable chip control Round insert with 7° clearance for versatility Stable machining through optimised chip control The circular geometry combined with the RM4 chipbreaker provides consistently controlled chip formation even under varying depths of cut. The chipformer design reduces the risk of built-up edge and supports a predictable chip flow, which improves process stability and reduces interruptions. This results in a more reliable cycle time and a better surface finish, particularly important when working with stainless steel, where chips tend to stick and temperatures can rise. Longer runtimes thanks to advanced coating and grade The cutting grade WMP20G, implemented within the Tiger·tec Gold coating technology, is a coated carbide solution tailored to resist abrasive and adhesive wear in demanding stainless applications. The combination of a robust substrate and multi-layer coating supports a stable cutting edge and delays flank wear, leading to fewer indexings and longer tool life. For production environments seeking consistent output, this translates into lower tooling downtime and predictable replacement intervals. Versatile form and geometry for workshop flexibility The round insert shape, a 7° clearance and the compact RCMT1204M0-RM4 designation make the component easy to seat in a wide range of toolholders and lathe setups. The insert’s geometry allows neutral to light cutting angles, enabling simple set-up and reliable engagement in interrupted cuts or less rigid setups. In practice, this geometry supports adaptability across a shop floor without sacrificing the cutting edge stability required for stainless steel workpieces. Choose Walter Tools’ RCMT1204M0-RM4 WMP20G when process reliability and predictable tool life are priorities; contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: RCMT1204M0-RM4-WMP20G-WALTER Article designation: RCMT1204M0-RM4 WMP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Free angle: 7° Inscribed circle: 12 Plate thickness code: 04 Tolerance class: M Special features Cutting grade: WMP20G Coating / series: Tiger·tec Gold Plate form: Round Chipbreaker: RM4 Material application: stainless steel FAQ Which materials is this insert suitable for? The RCMT1204M0-RM4 WMP20G insert is specified for machining stainless steel and is optimised for the toughness and heat characteristics of these materials. What benefit does the RM4 chipbreaker provide? The RM4 chipbreaker on this Walter Tools insert supports stable chip control, reducing build-up and promoting consistent chip evacuation during stainless steel turning. Is the insert coated and what does the coating do? Yes, the insert uses the Tiger·tec Gold coating technology; this multi-layer coating on the WMP20G grade enhances wear resistance and helps maintain a sharp, stable cutting edge. What insert shape and clearance are featured? The product is a round insert with a 7° clearance, offering flexibility in toolholder selection and reliable edge engagement for a range of turning tasks. How does the WMP20G grade affect productivity? WMP20G is designed to provide stable chip formation and extended edge life in stainless steel, which supports longer runtimes and fewer tool changes during production. Walter Tools / Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1204M0-RM4 WMP20S Wendeplatten - Walter Tools
Take advantage of a robust combination of long tool life and reliable chip control for stable turning of stainless steel components; the Tiger·tec Silver coating and RM4 chipbreaker reduce downtime and improve surface finish. Order directly via Metav Werkzeuge or consult our technical team for application support. RCMT1204M0-RM4 WMP20S turning insert – Tiger·tec Silver, Walter Tools The RCMT1204M0-RM4 WMP20S is a round turning insert engineered for medium to robust machining of stainless steel with a 7° clearance for secure cutting edge engagement Tiger·tec Silver coating for longer tool life Optimised RM4 chipbreaker for stable chips Round form for versatile entering and profiling Suitable for stainless steel machining Reliable cutting performance for stainless steel The coated carbide grade from the Tiger·tec Silver family is formulated to handle the toughness and built-up-edge tendencies of stainless steel. The combination of a wear-resistant coating and a precision ground edge means that consistent cutting forces are maintained, which reduces the frequency of tool changes and supports predictable cycle times. The round insert geometry delivers secure engagement when profiling and entering, while the 7° clearance helps avoid rubbing and contributes to improved surface quality. Improved productivity through stable chip control The RM4 chipbreaker is designed to form short, controllable chips under the cutting conditions typical for austenitic and martensitic stainless steels. Stable chip formation decreases the risk of workpiece damage and simplifies chip evacuation in automated cells. With fewer interruptions for chip management, machining throughput is increased. The coated grade also enhances thermal resistance, so tool life is extended under the elevated temperatures encountered when machining corrosion-resistant alloys. Versatility and machine compatibility for practical workshop use Dimensioned as size 12 with thickness 04 and a round plate form, this insert is compatible with a broad range of clamping systems and toolholders suited to finishing and light to medium roughing operations. The grade WMP20S is tuned for reliable performance in the M material group; selection of the correct feed and speed is advised to exploit the coating benefits fully. For application advice or cutting data adapted to specific machines and stainless steel grades, Metav Werkzeuge can provide tailored recommendations. Contact Metav Werkzeuge for a technical consultation on the Walter Tools RCMT1204M0-RM4 WMP20S turning insert, including cutting parameters and delivery options; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: RCMT1204M0-RM4-WMP20S-WALTER Article: Drehwendeschneidplatte RCMT1204M0-RM4 WMP20S Walter Tools Product type: turning insert Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Clearance angle: 7° Chipbreaker: RM4 Special features Series: Tiger·tec Silver Grade: WMP20S Plate form: Round Material group: M (stainless steel applications) Execution: T FAQ What materials is this insert best suited for? The RCMT1204M0-RM4 WMP20S insert is specified for stainless steel machining and belongs to the M material group, making it suitable for a range of corrosion-resistant alloys. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WMP20S grade increases thermal and wear resistance, which prolongs edge life and supports consistent surface finish across longer tool life cycles. Which chipbreaker is integrated and what is its benefit? This insert features the RM4 chipbreaker, developed to create short, controllable chips when machining tough, ductile stainless steels, improving chip evacuation and reducing secondary operations. Can the insert be used for profiling and shoulder cuts? The round plate form and the 7° clearance make the insert versatile for profiling and light shoulder work; selection of appropriate feeds and speeds is advised to avoid excessive cutting forces. Is this a Walter Tools original product and how is authenticity ensured? The RCMT1204M0-RM4 WMP20S is an original Walter Tools turning insert; product authenticity is maintained as supplied new from the manufacturer Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
RCMT1204M0-RM4 WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, a thermally stable coating and reliable chip control for consistent productivity in stainless and superalloy turning; order the inserts through Metav Werkzeuge or request consultation for optimal grade and geometry selection. RCMT1204M0-RM4 WSM20S — turning insert, Tiger·tec Silver grade for rostfreier Stahl and superalloys by Walter Tools The RCMT1204M0-RM4 WSM20S is a round turning insert designed for medium‑ to high‑demand machining of rostfreier Stahl and heat‑resistant superalloys, offering a thermally resistant coating and a chipbreaker tuned for stable cutting. Tiger·tec Silver coating for high process security Grade WSM20S optimised for rostfreier Stahl and superalloys Round RCMT form with 7° clearance angle Stable chip formation with RM4 chipbreaker Consistent cutting performance for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade provides a coated carbide solution that is designed to resist thermal loading and maintain edge integrity when machining tough materials. The grade is formulated for applications in rostfreier Stahl and in heat‑resistant superalloys and titanium alloys, where heat generation and edge wear are primary concerns. As a result, machining operations benefit from more consistent tool life and repeatable surface finish, which supports cycle‑time reduction and fewer tool changes in production environments. Geometry engineered for control and surface quality The insert’s RCMT geometry, a round insert with an inscribed circle of 12 mm and a plate thickness of 4 mm, provides strength at the cutting edge and flexibility in feed direction. The 7° clearance angle reduces rubbing while preserving support behind the cutting edge, enabling secure chip formation. The RM4 chipbreaker is tuned for reliable evacuation and short, controllable chips in medium feeds, simplifying swarf management and lowering the risk of built‑up edge. These characteristics make the insert suitable for semi‑finishing and finishing passes depending on the chosen toolholder and cutting data. Practical benefits for shopfloor productivity Specifically developed for challenging alloys, the insert supports stable machining where thermal resistance and edge stability matter most. The WSM20S grade, belonging to the Tiger·tec Silver family, emphasises process security and consistent performance across batches. Selection of this insert can reduce unplanned downtime and improve first‑pass yields. For grade and geometry matching to machine capability and component tolerances, Metav Werkzeuge’s technical advisors can provide data‑driven recommendations, including suggested holder types and parameter windows based on the workpiece material and cycle requirements. Contact Metav Werkzeuge for tailored grade and geometry recommendations or to order Walter Tools RCMT1204M0‑RM4 WSM20S inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: RCMT1204M0-RM4-WSM20S-WALTER Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Designation: RCMT1204M0-RM4 WSM20S Facts Inscribed circle: 12 mm Thickness: 4 mm Clearance angle: 7° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: RM4 Shape: Round Material application: rostfreier Stahl (M), superalloys/titan (S) Execution: T FAQ Which materials is this insert intended for? The RCMT1204M0‑RM4 WSM20S insert is intended primarily for rostfreier Stahl and for heat‑resistant superalloys/titanium (ISO groups M and S), where thermal stability and edge resilience are required. What are the key geometric dimensions of the insert? The insert has an inscribed circle of 12 mm and a thickness of 4 mm; it is a round RCMT form with a 7° clearance angle and an RM4 chipbreaker. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver offers enhanced thermal resistance and wear properties for coated carbide grades, resulting in improved process security and longer life under thermally demanding turning conditions. Is this insert suitable for finishing and semi‑finishing? Yes, depending on the chosen toolholder geometry and cutting data, the insert can be used for both semi‑finishing and finishing operations thanks to its stable edge and chip control characteristics. How does the RM4 chipbreaker affect chip behaviour? The RM4 chipbreaker is designed to produce short, controlled chips in medium feed ranges, reducing swarf entanglement and improving evacuation in continuous turning operations. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any commercial relationship or endorsement. The offered article is an original, factory‑new product of the manufacturer.
RCMT1204M0-RM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM30S grade for extended edge life and reliable chip control; the RM4 chipbreaker and round geometry ensure stability in interrupted cuts and demanding materials. Order the Walter Tools insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. RCMT1204M0-RM4 WSM30S indexable turning insert by Walter Tools — Tiger‑tec Silver, RM4 chipbreaker RCMT1204M0-RM4 WSM30S is a round, coated carbide turning insert designed for machining stainless steels and heat‑resistant superalloys and titanium in demanding turning applications Tiger‑tec Silver coated carbide grade WSM30S Optimised RM4 chipbreaker for stable chips Suitable for stainless steels and superalloys Round geometry with 7° clearance angle High thermal stability for tough materials The WSM30S grade, part of the Tiger‑tec Silver family, is a coated carbide formulation engineered to resist thermal softening and maintain edge integrity under elevated cutting temperatures. That makes the insert particularly effective when machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where heat concentration and work‑hardening are common. The practical benefit is fewer tool changes and more consistent cycle times, reducing unplanned downtime in production. Stable chip control that reduces rework Equipped with the RM4 chipbreaker, this insert promotes predictable chip formation and evacuation even in sticky or stringy materials. Stable chips lower the risk of built‑up edge and minimise surface damage to the workpiece, which translates directly into improved first‑pass part quality. For workshops targeting repeatable finishes and reduced secondary operations, the chip control provided by this geometry supports those quality goals without complex process adjustments. Geometry and clearance designed for secure cutting The round form combined with a 7° clearance angle provides excellent edge strength and resilience in interrupted cuts or when turning radii. The robust geometry spreads cutting forces across the nose radius, which increases resistance to chipping and ensures reliable performance during tougher cutting conditions. This results in longer tool life and a steadier surface finish, especially in applications where rigidity and tool life are priorities. Practical handling and integration into production The insert designation RCMT1204M0-RM4 WSM30S corresponds to a standard indexable format that fits common turning toolholders for round inserts. The tolerance class M and the execution marked T reflect manufacturing precision suited for industrial turning processes. For production planners, the main advantage is straightforward integration: the insert offers a balance between process stability and flexibility across a broad range of stainless and high‑temperature alloys, allowing consistent results across multiple workpieces with minimal setup variation. For application guidance or to procure the Walter Tools RCMT1204M0-RM4 WSM30S insert through Metav Werkzeuge, contact Metav Werkzeuge for tailored recommendations and prompt supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RCMT1204M0-RM4-WSM30S-WALTER Label: Drehwendeschneidplatte RCMT1204M0-RM4 WSM30S Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Facts Clearance angle: 7° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: RM4 Plate form: Round Material applicability: stainless steels (M) Material applicability: superalloys and titanium (S) Execution: T FAQ What materials is this insert suited for? The RCMT1204M0-RM4 WSM30S insert is designed for stainless steels (ISO M) and heat‑resistant superalloys and titanium (ISO S), providing thermal stability and edge strength for these demanding materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface finish when machining sticky or cohesive materials. Why choose a round insert for turning tasks? A round form offers high nose strength and durability in interrupted cuts or when turning contours, distributing cutting forces to resist chipping and extend tool life. Is the WSM30S grade suitable for long production runs? Yes, WSM30S in the Tiger‑tec Silver family is formulated for process stability under heat and load, supporting longer runs with consistent performance. Which toolholders are compatible with the RCMT1204M0-RM4 format? The RCMT designation matches standard toolholder interfaces for round indexable inserts; check the holder catalogue to confirm seating and clamping specifications. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1204M0-RP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Gold coating and the wear‑resistant WPP10G grade for reliable machining of steel; the optimised RP4 chipbreaker and 7° clearance ensure stable chip control and consistent surface results. Order the RCMT1204M0‑RP4 WPP10G insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. RCMT1204M0‑RP4 WPP10G turning insert — Tiger·tec Gold, RP4 chipbreaker, for steel, Walter Tools The RCMT1204M0‑RP4 WPP10G is a round turning insert designed for efficient steel turning with a Tiger·tec Gold coated carbide grade and an RP4 chipbreaker for predictable chip formation Tiger·tec Gold coated carbide grade WPP10G Optimised RP4 chipbreaker for steel turning Round 12 insert with 7° clearance Consistent wear resistance and process security Higher throughput thanks to coating and grade The combination of the Tiger·tec Gold coating and the WPP10G grade delivers increased tool life and repeatable performance in steel turning. The coated carbide substrate resists adhesion and abrasive wear typically encountered when machining unalloyed and alloyed steels, which reduces interruptions for index changes and contributes to measurable productivity gains. This technical pairing is geared towards operations seeking steady cutting performance and longer service intervals rather than frequent index replacements, supporting cost‑efficient production runs. Predictable chip control and surface quality The RP4 chipbreaker geometry is engineered to produce short, controllable chips when machining Stahl, reducing the risk of entanglement and improving evacuation in confined setups. Combined with a 7° clearance angle, the insert maintains a stable cutting edge engagement that helps achieve consistent surface finish and dimensional stability. For users less familiar with chipbreaker terminology: the RP4 land and groove geometry control chip curl and breakage, which simplifies coolant strategies and lowers the likelihood of rework. Simple integration and workshop benefits As a round, indexable insert in size 12 with thickness code 04, this component fits a wide range of standard turning toolholders designed for round inserts, enabling quick retrofits in existing tool assemblies. The RCMT1204M0‑RP4 WPP10G insert from Walter Tools supports flexible tooling layouts and predictable tool change cycles, which simplifies inventory planning and enhances process reliability. Technical teams will appreciate the clear grade designation and the established coating technology when specifying inserts for serial production or prototype runs. For high‑reliability steel turning with excellent chip control, request a personalised quote or machining recommendation from Metav Werkzeuge for Walter Tools inserts and benefit from our application expertise Technical data Article number: RCMT1204M0-RP4-WPP10G-WALTER Designation: RCMT1204M0-RP4 WPP10G Type: Turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Plate size: 12 Thickness code: 04 Clearance angle: 7° Tolerance class: M Chipbreaker: RP4 Special features Coating: Tiger·tec Gold Grade: WPP10G Form: Round Material suitability: P (Stahl) FAQ Which materials is this insert intended for? The RCMT1204M0‑RP4 WPP10G turning insert is specified for machining P materials, i.e. Stahl, and the WPP10G grade and Tiger·tec Gold coating are optimised for the thermal and chip‑formation conditions typical of steel turning. What advantage does the RP4 chipbreaker offer? The RP4 chipbreaker on this Walter Tools insert controls chip curl and promotes short, repeatable chips, which improves evacuation and reduces interruptions during continuous turning operations. How many cutting edges per index are available? The RCMT1204M0‑RP4 geometry provides multiple index positions per insert; exact edge counts depend on the toolholder and mounting orientation used with the insert. Can this insert be used without external coolant? The WPP10G grade with Tiger·tec Gold coating is tolerant to a range of cutting conditions; however, coolant requirements depend on the specific application and machine setup. Consult Metav Werkzeuge for tailored recommendations. Is the insert compatible with standard round‑insert toolholders? Yes, the round form and size designation make the insert compatible with common toolholders designed for RCMT‑style round inserts; check holder specifications for seat and clamping compatibility. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
RCMT1204M0-RP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an optimised RP4 chipbreaker for reproducible productivity and long tool life; the round insert geometry with a 7° clearance ensures robust performance in steel turning. Order or request tailored cutting data via Metav Werkzeuge for reliable integration into existing turning processes. RCMT1204M0-RP4 WPP20G — Turning indexable insert, Tiger·tec Gold, for steel — Walter Tools RCMT1204M0-RP4 WPP20G is a round turning indexable insert designed for versatile steel machining applications and is part of the Walter Tools Tiger·tec Gold series. Tiger·tec Gold coating for extended life Optimised RP4 chipbreaker for stable chips Suitable for steel machining (ISO P) Round form, inscribed circle 12 mm Consistent edge life through advanced coating technology The Tiger·tec Gold coating and the underlying coated carbide substrate are engineered to balance wear resistance and toughness for steel cutting. This combination reduces flank wear and extends service intervals, which improves aggregate productivity in batch and continuous production. Thermal stability of the coating supports higher cutting speeds while maintaining a controlled cutting edge, contributing to predictable tool performance and reduced rework rates. Predictable chip control and secure cutting geometry The insert features the RP4 chipbreaker, optimised for the ISO P material group to shape chips reliably during turning operations; this promotes machine uptime and safe chip evacuation. The round design and the specified 7° clearance support a robust cutting edge that resists chipping under fluctuating loads. Together, these elements improve process stability and help achieve consistent surface quality without complex adjustment. Adapted for productive steel turning and process reliability Intended primarily for steel (ISO P), this insert suits a wide range of turning tasks where repeatability and tool life are priorities. The combination of the Tiger·tec Gold grade and the plate geometry enables efficient metal removal while preserving dimensional accuracy. In production environments, this leads to fewer tool changes and reduced cycle-time variability, which directly supports higher throughput and lower unit manufacturing costs. Practical fitment, inspection and handling notes The insert comes in the standard RCMT form factor with a 12 inscribed circle and a thickness code 04, tolerance class M and is identified by the RCMT1204M0-RP4 WPP20G designation. The round insert form reduces orientation sensitivity and simplifies clamping. For process set-up, manufacturers typically record cutting data per material grade; the insert’s consistent behaviour under steel-cutting conditions makes initial parameter selection straightforward and repeatable across batches. Contact Metav Werkzeuge for cutting-data sheets, compatibility checks and application advice on Walter Tools Tiger·tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: RCMT1204M0-RP4-WPP20G-WALTER Article: RCMT1204M0-RP4 WPP20G Type: Turning indexable insert Brand: Walter Tools Facts Inscribed circle: 12 mm Thickness code: 04 Clearance angle: 7° Tolerance class: M Chipbreaker: RP4 Special features Coating: Tiger·tec Gold (WPP20G) Material group suitability: P (steel) Plate shape: Round Series: Tiger-tec Gold Execution: T FAQ What materials is this insert intended for? The RCMT1204M0-RP4 WPP20G insert is designed primarily for the ISO P group; it is optimised for machining steel with balanced wear resistance and toughness. How does the RP4 chipbreaker influence performance? The RP4 chipbreaker on this Walter Tools insert produces stable chips under typical steel cutting conditions, improving chip flow and contributing to process reliability. What are the key dimensional identifiers for compatibility? Compatibility is determined by the RCMT1204M0-RP4 form—inscribed circle 12 mm and thickness code 04—so toolholders matching RCMT geometry will accept the insert. Is this insert suitable for higher cutting speeds? The Tiger·tec Gold coating and coated carbide substrate provide thermal stability that supports increased cutting speeds compared with uncoated grades, while maintaining edge life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. There is no affiliation between our company and the referenced manufacturers. The offered article is original, factory-new goods of the manufacturer.
RCMT1204M0-RP4 WPP30G Wendeplatten - Walter Tools
Take advantage of high process reliability and controlled chip formation through the combination of the WPP30G coated carbide grade and the RP4 chipbreaker; ideal for efficient steel turning operations. Order this insert directly via Metav Werkzeuge or consult our team for cutting parameters and application advice. RCMT1204M0-RP4 WPP30G — Walter Tools turning insert, Tiger·tec Gold coated, RP4 chipbreaker The RCMT1204M0-RP4 WPP30G is a round indexable turning insert optimised for general steel machining, offering a Tiger·tec Gold coating and a chipbreaker tuned for stable swarf control in ISO P applications. Tiger·tec Gold coated carbide RP4 chipbreaker for stable chips 12 mm round insert, 4 mm thickness Designed for steel machining (ISO P) Improved productivity through reliable chip control The combination of the RP4 chipbreaker and the WPP30G grade reduces interruptions caused by erratic chip formation and tool changes. The chipbreaker is designed to produce short, controllable chips when machining steels, which lowers the risk of rework and tool collisions. Meanwhile, the Tiger·tec Gold coating reduces friction at the cutting edge and improves heat resistance so that cutting regimes can be maintained for longer periods. In practice, this leads to fewer tool interventions, steadier cycle times and increased machine uptime. Better surface quality and longer tool life A coated carbide substrate with the Tiger·tec Gold technology protects the cutting edge against abrasive wear and built-up edge formation, delivering more consistent finishes on turned components. The coating’s thermal stability helps maintain the effective edge geometry under typical steel cutting temperatures, which in turn preserves dimensional accuracy across longer production runs. The result is measurable savings through reduced insert consumption and improved part-to-part quality. Application guidance for steel machining and parameter planning The insert is intended for ISO group P (steel) applications and suits a range of unalloyed and alloyed steels. The geometry includes a 7° clearance angle and a round form that supports stable engagement and easy indexability. For best results, machining parameters should be matched to workpiece grade and operation type: the WPP30G grade is balanced between wear resistance and toughness, making it suitable for general to semi-rough turning. Refer to cutting data tables or consult Metav Werkzeuge advisers to adapt speed, feed and depth of cut to specific steels and machine capabilities. Contact Metav Werkzeuge for tailored cutting data or to request this Walter Tools RCMT1204M0-RP4 WPP30G turning insert with Tiger·tec Gold coating: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: RCMT1204M0-RP4-WPP30G-WALTER Label: Drehwendeschneidplatte RCMT1204M0-RP4 WPP30G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Grade/series: WPP30G / Tiger-tec Gold Facts Insert diameter: 12 mm Thickness: 4 mm Clearance angle: 7° Tolerance class: M Special features Coating technology: Tiger·tec Gold Carbide grade: WPP30G (coated carbide) Chipbreaker: RP4 Shape: Round Material suitability: Steel (ISO P) Execution: T FAQ What steels is this insert best suited to? The RCMT1204M0-RP4 WPP30G is optimised for ISO P steels, covering unalloyed and alloyed grades that require balanced wear resistance and toughness. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker promotes short, manageable chips when turning steel, which improves process reliability and reduces the likelihood of chip entanglement at the tool or workpiece. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold increases thermal stability and reduces friction at the cutting edge, leading to improved tool life and a more consistent surface finish during extended runs. Is this insert suitable for finishing and semi-roughing? Yes. The WPP30G grade and round geometry deliver versatility for both finishing and semi-roughing operations in steel when cutting parameters are set accordingly. Can the insert be indexed to present a fresh cutting edge? The round insert design and standard RCMT clamping enable indexing to a new edge, making it a practical choice for multi-edge utilisation and cost-effective production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, brand-new product from the manufacturer.
RCMT1605M0-RK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the RK4 chipbreaker for stable chip control and extended tool life in cast iron machining — order the RCMT1605M0-RK4 WKK20S turning insert directly via Metav Werkzeuge or ask the consultants for application support. RCMT1605M0-RK4 WKK20S Turning insert (Tiger·tec Silver) – for cast iron (Walter Tools) RCMT1605M0-RK4 WKK20S is a round indexable turning insert designed for reliable performance when machining cast iron, offering a coated-carbide grade and a chipforming geometry optimised for abrasive materials Tiger·tec Silver coating for wear resistance RK4 chipbreaker for stable chip control Round insert geometry for profile versatility 7° clearance angle for reduced rubbing Consistent edge life for abrasive cast iron applications The combination of the Tiger·tec Silver coating and the WKK20S grade provides a robust solution for machining cast iron, where abrasive wear and short, brittle chips are typical. The coated carbide composition increases resistance to abrasive damage and helps maintain a sharp cutting edge over longer production runs, which translates into fewer tool changes and improved uptime. The specified RK4 chipbreaker is engineered to manage the fragmented chips common with grey and nodular cast irons, supporting predictable chip flow and minimising the risk of tool or workpiece damage during interrupted cuts. Geometry that improves process security and flexibility With its round insert format and 7° clearance, this insert offers a balance between cutting stability and geometric versatility. The round shape permits multiple effective cutting edges and is suitable for profiling and general turning tasks, while the positive clearance reduces friction at the flank, lowering heat generation and wear. The product’s M tolerance class signals consistent dimensional accuracy, which supports repeatable set-ups and reproducible results across batches — a decisive factor in medium- to high-volume production where process security is essential. Application-focused performance and handling benefits This grade is explicitly tailored for cast iron applications and therefore adapts to the typical chip break behaviour of those materials. The coated grade combination provides advantages in abrasive environments, enabling longer tool life and stable surface finishes without aggressive interventions. Handling and indexing remain straightforward thanks to the well-known RCMT insert format; maintenance routines are simplified and changeover times are reduced, contributing to an efficient machining cycle and lower overall production costs when compared with less specialised solutions. Contact Metav Werkzeuge for detailed application advice on the Walter Tools RCMT1605M0-RK4 WKK20S turning insert and to confirm availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: RCMT1605M0-RK4-WKK20S-WALTER Product type: Turning insert / indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Facts Shape: Round Size: 16 Thickness: 05 Clearance angle: 7° Tolerance class: M Special features Chipbreaker: RK4 Coating: Tiger·tec Silver (coated carbide grade) Material application: Cast iron (Gusseisen) Execution: T FAQ What materials is this insert optimised for? The RCMT1605M0-RK4 WKK20S insert from Walter Tools is optimised for machining cast iron, with the WKK20S grade specifically tuned for abrasive wear and short, brittle chips typical of these materials. How does the RK4 chipbreaker affect machining of cast iron? The RK4 chipbreaker on the Walter Tools insert promotes controlled chip fragmentation, reducing chip entanglement and improving surface quality when turning cast iron. Is the Tiger·tec Silver coating relevant for productivity? Yes, the Tiger·tec Silver coating increases wear resistance and edge life for this grade, which supports longer tool life and more consistent cycle times in cast iron production. Does the round geometry suit profiling operations? The round insert geometry provides multiple usable cutting edges and good adaptability for profiling and general turning tasks, making it a versatile choice in workshops. What does the tolerance class M indicate for users? The M tolerance class denotes consistent dimensional accuracy for the insert, helping to ensure repeatable set-ups and predictable tool performance across production runs. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is original and brand-new from the manufacturer.
RCMT1605M0-RP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the RP4 chipbreaker for reliable, productive steel turning; the robust round geometry and 7° clearance ensure consistent chip control and reduced rework. Order the RCMT1605M0-RP4 WPP10G directly via Metav Werkzeuge or ask our consultants for application advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 RCMT1605M0-RP4 RCMT1605M0-RP4 WPP10G for steel — Walter Tools RCMT1605M0-RP4 WPP10G is an indexable turning insert designed for efficient steel machining, combining a Tiger·tec Gold coating with an RP4 chipbreaker for predictable performance Tiger·tec Gold coating for extended tool life Optimised RP4 chipbreaker for steel machining Round insert, 16 mm size for versatile turning 7° clearance angle for secure chip control Maximise uptime with a coated grade made for steel The RCMT1605M0-RP4 WPP10G insert uses the Tiger·tec Gold coating technology to resist abrasive wear and maintain cutting edge integrity during continuous operation. As a coated carbide grade, WPP10G is tailored for machining steel (ISO group P) where typical heat generation and chip formation demand a balanced, wear-resistant composition. The result is longer tool life and fewer indexings, which translates into higher machine availability and lower process costs per component. Consistent chip formation and improved surface quality The RP4 chipbreaker is engineered to produce short, controllable chips when turning steels, reducing the risk of entanglement and improving machining stability. Combined with the insert’s round geometry and 7° clearance angle, this geometry supports smooth entry and exit behaviour and helps to achieve a consistent surface finish. In practice, shorter, uniform chips reduce secondary operations and cleaning time, supporting more predictable cycle times on series production. Streamlined stock management and process reliability With a standard size designation of 16 and a plate-thickness code 05, the insert fits established toolholders and offsets, simplifying tooling logistics. The tolerance class M ensures repeatable positioning and interchangeability, which helps to reduce setup time and supports reproducible results across shifts. For manufacturing environments seeking robust, economical cutting solutions, the combination of a proven coating, defined chip control and a standardised form factor offers a practical balance of productivity and ease of tool management. For tailored tooling recommendations and to ensure optimal chipformer and grade pairing, contact Metav Werkzeuge to discuss the RCMT1605M0-RP4 WPP10G from Walter Tools and its suitability for specific steel grades Technical Data Article number: RCMT1605M0-RP4-WPP10G-WALTER Designation: RCMT1605M0-RP4 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Size designation: 16 Plate-thickness code: 05 Clearance angle: 7° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RP4 Shape: round Material application: steel (ISO group P) FAQ What material is this insert primarily intended for? The RCMT1605M0-RP4 WPP10G insert is optimised for steel (ISO group P) applications and is designed to handle the heat and chip formation typical of steel turning. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on this grade reduces abrasive wear and maintains cutting-edge strength, so the insert keeps sharper edges for longer in continuous steel machining. Which chipbreaker is fitted and what is its advantage? The insert features the RP4 chipbreaker, which promotes short and controllable chips during steel turning, improving process stability and surface quality. Is the round geometry suitable for profiling operations? Yes, the round shape provides smooth cutting transitions and can be used for a range of turning operations where consistent surface finish and controlled entry/exit are required. What does the plate-thickness code '05' indicate? The code relates to the insert’s standard thickness designation used for matching to compatible toolholders and ensuring correct seating and rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand name: Walter Tools) is a global provider of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and product names mentioned are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and these brand owners. The offered article is an original, factory-new product of the manufacturer.
RCMT1605M0-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Gold coating, precise RP4 chip control and a compact round geometry for consistent steel turning performance; order the RCMT1605M0-RP4 WPP20G insert through Metav Werkzeuge or consult the specialists for application-specific recommendations. RCMT1605M0-RP4 WPP20G – Round turning insert, Tiger‑tec Gold (Walter Tools) The RCMT1605M0-RP4 WPP20G is a coated carbide round insert designed for steel turning, offering robust chip control and extended tool life in general turning and finishing operations. Tiger‑tec Gold coating for higher wear resistance RP4 chipbreaker optimised for steel turning 7° clearance angle for reliable cutting stability Round 16 mm form for versatile contouring Longer cutting life through a high‑performance coating The insert benefits from the Tiger‑tec Gold coating technology and the WPP20G grade, a coated carbidesort designed specifically for the thermal and mechanical challenges of machining steel. This combination reduces flank wear and extends service intervals, which leads to fewer insert changes and improved process economy. The applied coating enhances adhesion resistance at elevated temperatures and supports stable cutting edges in cyclic operations. For production environments where uptime and predictable tool life matter, the coated grade delivers repeatable results and easier process planning. Reliable chip control and surface quality from optimised geometry The RP4 chipbreaker and the round 16 mm form create controlled chip formation and evacuation in a wide range of turning conditions. The round geometry enables smooth engagement with workpiece contours, reducing vibration and supporting consistent surface finish in finishing and light profiling tasks. The chipbreaker design balances strength at the cutting edge with reliable chip segmentation, which simplifies chip flow in both interrupted and continuous cuts. Users benefit from reduced rework and more stable machining parameters, resulting in higher first‑pass quality. Practical benefits for workshop productivity and part consistency With a 7° clearance angle and an M tolerance class, this insert is engineered for robust cutting and predictable seat fitment in standard toolholders. The compact thickness and round form allow flexibility across tool systems while the WPP20G grade offers a balance between toughness and wear resistance suitable for general steel machining. In practice, this means fewer unplanned stoppages, lower tooling consumption per component and more consistent cycle times. For application review or to ensure optimal toolholder selection, Metav Werkzeuge can provide tailored recommendations based on the intended material and machining strategy. Contact Metav Werkzeuge for application advice and to order Walter Tools Tiger‑tec Gold inserts tailored to specific steel turning tasks Technical Data SKU: RCMT1605M0-RP4-WPP20G-WALTER Article designation: RCMT1605M0-RP4 WPP20G Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Facts Form diameter: 16 mm Relief/clearance angle: 7° Thickness: 0.5 mm Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Plate form: Round Suitable for: Steel (P) FAQ What materials is this insert suitable for? The RCMT1605M0-RP4 WPP20G insert is specified for steel machining (ISO group P) and its WPP20G grade and chipbreaker are tuned to the heat and chip characteristics typical of that material. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and reduces adhesion at elevated temperatures, extending insert life and enabling more consistent cutting conditions in steel turning. What advantages does the round 16 mm form provide? The round geometry offers smooth engagement with profiles and enhanced resistance to edge chipping, making it suitable for contour turning, finishing passes and operations requiring reliable chip control. Is the RP4 chipbreaker suitable for interrupted cuts? Yes, the RP4 chipbreaker balances edge strength and controlled chip formation, providing stable performance in both continuous and interrupted turning applications on steel. What does the M tolerance class mean for toolfit? Tolerance class M indicates a medium tolerance level for seat and dimensional accuracy, supporting a secure fit in compatible toolholders and predictable repeatability across insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original factory‑new product of the manufacturer (Walter Tools).
RCMT1605M0-RP4 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger‑tec Gold coated carbide grade and an RP4 chipbreaker for steady chip control and extended tool life, together with a compact round form that supports versatile turning operations. Order the insert directly via Metav Werkzeuge or consult the team for application-specific cutting data. RCMT1605M0-RP4 WPP30G turning insert — coated carbide for steel, Tiger‑tec Gold by Walter Tools The RCMT1605M0-RP4 WPP30G is a round turning insert engineered for efficient machining of steel, offering a 7° clearance angle and an RP4 chipbreaker for predictable chip formation. Tiger‑tec Gold coated carbide grade WPP30G RP4 chipbreaker for consistent chip control 7° clearance angle for stable cutting Round 16 form for versatile turning Increased productivity with a wear-resistant grade The WPP30G grade, based on Tiger‑tec Gold coating technology, delivers a balance of wear resistance and toughness that is optimised for machining steel. This results in reduced flank wear under typical cutting temperatures and contributes to longer tool life, which in turn lowers tool-change frequency and downtime. The coated carbide construction supports higher cutting speeds while maintaining a reliable cutting edge, making it a rational choice when process stability and production throughput are priorities. Predictable chips and improved surface quality Equipped with the RP4 chipbreaker, the insert provides consistent chip control in a wide range of turning conditions. The chipbreaker geometry guides material flow to produce short, manageable chips, reducing the risk of surface damage and machine interruptions. For operators and programmers unfamiliar with chipbreaker behaviour: a chipbreaker modifies the local cutting geometry to curl and break chips, improving evacuation and enabling a cleaner surface finish with fewer secondary passes. Stable geometry for repeatable performance The round form with a 16 designation and a clearance angle of 7° supports versatile turning operations, from roughing to form finish, and the tolerance class M ensures reproducible seating in compatible toolholders. The insert’s plate thickness is indicated as 05 and the design execution is T, which together define stiffness and edge support in the cut. This stable geometry helps maintain dimensional consistency across batches, an essential factor for shops that require repeatable component quality and reduced rework. Application guidance and material suitability Marked as material group P, the insert is intended for unalloyed and alloyed steel, addressing typical heat generation and chip formation patterns encountered when machining these materials. For machinists seeking to optimise parameters, start from conservative feeds and speeds recommended for Tiger‑tec Gold grades and increase cautiously while monitoring tool wear and chip shape. The combination of grade, chipbreaker and geometry makes the insert particularly effective where a compromise between wear resistance and toughness is required. Contact Metav Werkzeuge for tailored cutting data and to order genuine Walter Tools Tiger‑tec Gold inserts; call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: RCMT1605M0-RP4-WPP30G-WALTER Label: Drehwendeschneidplatte RCMT1605M0-RP4 WPP30G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Plate size / form: 16, round Plate thickness: 05 Tolerance class: M Special features Series / coating: Tiger‑tec Gold Grade: WPP30G Chipbreaker: RP4 Designation without grade: RCMT1605M0-RP4 ISO designation: RCMT1605M0-RP4 WPP30G Material group: P (steel) Execution: T FAQ What materials is this insert recommended for? The RCMT1605M0-RP4 WPP30G insert is designed for machining steel (material group P) and performs well on both unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on the RCMT1605M0-RP4 WPP30G helps to control chip shape and evacuation, producing short chips that protect the workpiece and toolholder. What advantage does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold coating in the WPP30G grade increases wear resistance while maintaining toughness, resulting in longer tool life and higher process stability when turning steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1606M0-HU6 WPP10G Wendeplatten - Walter Tools
Take advantage of high wear resistance and stable chip control from the Tiger·tec Gold grade combined with a round geometry and HU6 chipbreaker for efficient steel turning; order through Metav Werkzeuge or consult their engineers for cutting data and availability. RCMT1606M0-HU6 WPP10G — Round turning indexable insert with HU6 chipbreaker and 7° clearance (Walter Tools) The RCMT1606M0-HU6 WPP10G is a round turning indexable insert engineered for machining steel, offering reliable chip control and extended tool life through its Tiger·tec Gold coated-carbide grade. Tiger·tec Gold coated carbide grade WPP10G Optimised HU6 chipbreaker for stable chips 7° clearance for secure chip flow Round R16 form for versatile entry angles Consistent machining on steel through optimised grade and coating The insert’s WPP10G grade, part of the Tiger·tec Gold series, is a coated carbide formulation developed for machining steel (ISO group P). This material combination targets the typical heat and chip formation encountered when turning unalloyed and alloyed steels, delivering stable wear behaviour and a predictable tool life. In practice, the coating reduces flank wear and supports higher productive cutting windows while maintaining surface quality, which helps to lower rework rates and overall machining cost. Geometry and chip control that improve process reliability The round design and integrated HU6 chipbreaker are configured to produce controlled chip forms across a range of feeds and depths of cut. The 7° clearance angle supports secure chip evacuation and reduces rubbing at the cutting edge, while the insert’s consistency within tolerance class M ensures reproducible results when indexing. Together these features provide flexibility for interrupted cuts and varying approach angles, enabling stable cutting performance in serial turning operations. Economic advantages through predictable tool life and easy indexability By combining a wear-resistant grade with a reliable chipbreaker, the insert supports longer service intervals and fewer tool changes, which reduces unproductive downtime and tool inventory turnover. The RCMT1606M0-HU6 WPP10G delivers reproducible edge condition and surface finish, simplifying process planning and boosting overall throughput. For workshops seeking consistent results with minimal setup adjustments, this insert contributes directly to process stability and cost-efficiency. Contact Metav Werkzeuge for specific cutting data, stock information and tailored recommendations for Walter Tools Tiger·tec Gold inserts — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data SKU: RCMT1606M0-HU6-WPP10G-WALTER Designation: RCMT1606M0-HU6 WPP10G Manufacturer: Walter Tools Product type: Turning indexable insert Facts Size: 16 Thickness: 06 Clearance angle: 7° Tolerance class: M Special features Grade: WPP10G (Tiger·tec Gold, coated carbide) Chipbreaker: HU6 Shape: Round Series: Tiger·tec Gold Material group suitability: P (steel) Execution: T FAQ What materials is this insert designed for? The RCMT1606M0-HU6 WPP10G is formulated for steel applications (ISO group P) using the Tiger·tec Gold coated-carbide grade for improved wear resistance. How does the HU6 chipbreaker affect machining? The HU6 chipbreaker on this insert promotes stable chip formation and consistent evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions. What advantages does the round insert form provide? A round geometry offers multiple cutting edge orientations and improved entry-angle flexibility, making it suitable for interrupted cuts and varied turning scenarios. Is this insert suitable for high-volume production? Yes; the combination of a wear-resistant grade and consistent tolerance class M delivers predictable tool life and process reliability for serial production. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. They are mentioned for explanatory purposes only and there is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise from Walter Tools.
RCMT1606M0-HU6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and a precision HU6 chipbreaker to secure consistent productivity and longer tool life in steel turning. The well-balanced geometry with a 7° clearance angle ensures dependable engagement and surface quality. Order the RCMT1606M0-HU6 WPP20G insert directly via Metav Werkzeuge or ask our consultants for application advice. RCMT1606M0-HU6 WPP20G turning insert — Tiger·tec Gold coated, for steel turning (Walter Tools) RCMT1606M0-HU6 WPP20G is a round turning insert designed for reliable, high-productivity machining of steel (ISO P) in a wide range of industrial turning applications Tiger·tec Gold coating for stable cutting Universally suited for steel (ISO P) HU6 chipbreaker for controlled chips 7° clearance angle for reliable engagement Longer cutting life through advanced coating technology The Tiger·tec Gold coating on this indexable insert provides enhanced wear resistance and thermal stability compared with conventional coatings, which translates into longer tool life and fewer changeovers. The WPP20G grade is a coated carbide designed specifically for steel machining, combining abrasion resistance and toughness to handle typical heat and chip-formation during turning. For production environments where uptime matters, the coated layer reduces flank wear and helps maintain dimensional consistency over extended tool runs. Predictable chip control and surface finish for efficient throughput With the HU6 chipbreaker geometry, the insert delivers controlled chip formation across a broad range of depths of cut and feeds. The shaped breaker reduces risk of long, stringy chips and supports stable evacuation, which lowers the chance of surface damage and machine interruptions. This results in more predictable cycle times and a steady surface quality, helping to meet batch tolerances and improve overall throughput in turned steel components. Geometry optimised for secure engagement and dimensional accuracy The round plate form and its specified relief of 7° give a smooth cutting entry and even distribution of cutting forces, supporting consistent tool behaviour in interrupted and continuous cuts alike. The nominal plate size 16 and thickness 06 provide a stable seat in standard toolholders, while the tolerance class M ensures repeatable positioning. These design choices reduce vibration and contribute to improved part concentricity and repeatable surface integrity in serial production. Application economy and operational reliability Classified for ISO group P (steel), the insert suits a wide range of unalloyed and alloyed steels, making it a versatile choice for job shops and production lines that prioritise both economy and quality. The combination of a robust coated substrate and a defined chip control strategy reduces unplanned downtime and tooling costs per part. For customers seeking evidence-based performance, Walter Tools’ Tiger·tec Gold series is known for its stable cutting behaviour and consistent edge retention in steel applications. Contact Metav Werkzeuge for tailored machining recommendations for Walter Tools inserts and secure the best process reliability for steel turning Technical data Article number: RCMT1606M0-HU6-WPP20G-WALTER Name: Drehwendeschneidplatte RCMT1606M0-HU6 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade/series: WPP20G / Tiger·tec Gold Numbers / Core technical data Plate size: 16 Plate thickness: 06 Relief / clearance angle: 7° Tolerance class: M Designs / Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: HU6 Plate form: Round ISO designation: RCMT1606M0-HU6 WPP20G Material application: Steel (ISO P) FAQ What materials is this insert intended for? The RCMT1606M0-HU6 WPP20G insert is specified for machining steel (ISO P); the WPP20G grade is optimised for the heat and chip-formation typical of steel turning. How does the HU6 chipbreaker improve machining? The HU6 chipbreaker on this insert shapes and breaks chips consistently, improving chip evacuation and reducing the risk of surface damage during turning operations. Is the Tiger·tec Gold coating suitable for high-speed turning? Yes, the Tiger·tec Gold coating provides thermal and wear resistance that supports elevated cutting speeds in steel applications while maintaining flank and crater wear control. Which toolholder types are compatible with this round insert? Round inserts with the RCMT geometry and the given thickness are compatible with standard toolholders designed for RCMT-style indexable inserts; correct clamping and seat condition remain essential for performance. How does the 7° clearance angle affect cutting performance? A 7° clearance angle provides reliable tool engagement and helps distribute cutting forces evenly, supporting improved surface finish and repeatability in many turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1606M0-HU6 WPP30G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coating, a proven HU6 chipbreaker and a 7° relief angle ensures efficient, repeatable steel machining with reduced tooling change intervals; order the inserts via Metav Werkzeuge or consult the technical team for application-specific recommendations. RCMT1606M0-HU6 WPP30G – Turning insert (round, 16 mm), Tiger‑tec Gold, Walter Tools RCMT1606M0-HU6 WPP30G is a coated carbide turning insert engineered for productive steel machining in general turning and interrupted-cut applications. Tiger‑tec Gold coating for extended life HU6 chipbreaker for stable chip control Suitable for unalloyed and alloyed steel Round insert, 16 mm for versatile engagement Consistent productivity through advanced coating technology The Tiger‑tec Gold coating on this insert delivers a reliable combination of wear resistance and thermal stability, which translates into longer tool life and more consistent component quality. As a coated carbide grade, the WPP30G variety is tuned for the heat and chip formation typical of steel machining (ISO P), reducing the need for frequent index changes and supporting uninterrupted production cycles. The result is measurable improvement in machining economy and lower tool consumption per component when compared with uncoated grades, while maintaining predictable performance under varying cutting conditions. Stable chip control and surface finish with HU6 geometry The integrated HU6 chipbreaker promotes controlled chip formation and evacuation, lowering the risk of tangling or re-cutting chips in medium to heavy cuts. Combined with the 7° relief angle, the round insert geometry reduces cutting edge pressure spikes and improves the handling of interrupted cuts or varying engagement. For operations focused on surface consistency, this geometry helps achieve improved finishes without sacrificing productivity; the chipbreaker design also assists in consistent coolant access and reduces heat concentration at the cutting edge. Practical application and tooling considerations for steel turning The round 16 mm insert with thickness code 06 and tolerance class M fits a broad range of turning holders designed for indexable round inserts, offering flexibility across roughing and finishing tasks. The insert belongs to the Tiger‑tec Gold series and the WPP30G grade, which is optimised for steel machining including both unalloyed and alloyed steels. For secure performance, selection of a compatible seat and clamping system is advised to maintain repeatability and to exploit the coating benefits; careful control of cutting data and coolant strategy will extend the interval between index changes and increase overall process reliability. For production queries or to secure supplies of Walter Tools RCMT1606M0-HU6 WPP30G turning inserts, contact Metav Werkzeuge for tailored recommendations and prompt order processing Technical data SKU: RCMT1606M0-HU6-WPP30G-WALTER Label: Drehwendeschneidplatte RCMT1606M0-HU6 WPP30G Walter Tools Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Grade / sort: WPP30G Series: Tiger‑tec Gold Facts Insert diameter: 16 Thickness code: 06 Relief angle: 7° Tolerance class: M Chipbreaker: HU6 Special features Coated carbide grade Tiger‑tec Gold Suitable for steel (ISO P) Round plate form Execution: T Base designation: RCMT1606M0-HU6 High process stability and wear resistance FAQ What materials is this insert intended for? The RCMT1606M0-HU6 WPP30G insert is specified for machining steel (ISO P), covering unalloyed and alloyed steels with focus on typical steel heat and chip formation. What are the main benefits of the Tiger‑tec Gold coating? The Tiger‑tec Gold coating on the WPP30G grade provides increased wear resistance and thermal stability, which helps to extend tool life and maintain consistent component quality in steel turning. How does the HU6 chipbreaker influence machining? The HU6 chipbreaker promotes reliable chip formation and evacuation, improving process stability and surface finish while reducing the likelihood of chip-related issues during medium to heavy cuts. Is the insert suitable for stainless steel or hardened materials? The technical data for the RCMT1606M0-HU6 WPP30G specifies suitability for steel (ISO P); suitability for stainless steel or hardened materials is not listed in the provided data. Which toolholder types are compatible with this round insert? The round RCMT1606M0-HU6 geometry fits turning holders designed for round indexable inserts; selection of a matching seat and secure clamping is recommended to exploit the insert’s coating and chip control benefits. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
RCMT1606M0-RK4 WKK10S Wendeplatten - Walter Tools
Combining Tiger‑tec Silver wear resistance, the WKK10S carbide grade and an RK4 chipbreaker, this turning insert delivers consistent edge life and stable chip formation in cast‑iron production; order directly via Metav Werkzeuge or consult our specialists for process matching. RCMT1606M0-RK4 WKK10S Turning Indexable Insert – Tiger‑tec Silver for Cast Iron (Walter Tools) A RCMT1606M0-RK4 WKK10S turning insert designed for productive machining of cast iron, pairing a Tiger‑tec Silver coating with RK4 chip control for reliable results Tiger‑tec Silver coating for wear resistance WKK10S grade optimised for cast iron RK4 chipbreaker for stable chip control Round 16 mm form with 7° clearance Increased process reliability for cast‑iron machining The coated carbide composition from the Tiger‑tec Silver series enables significantly improved wear resistance under abrasive conditions typical of cast‑iron workpieces. The chosen grade, WKK10S, is tuned for the short, brittle chips of cast materials, which supports predictable cutting forces and reduces the frequency of insert changes. This results in a steadier production rhythm and fewer unscheduled interruptions, contributing to measurable gains in throughput and consistent component quality. Fewer stoppages thanks to controlled chip behaviour An integrated RK4 chipbreaker provides dependable chip control across common lathe setups, reducing entanglement and enhancing operator safety. Stable chips simplify coolant and conveyor handling and cut down on manual interventions at the machine. The round form and the insert’s geometry promote uniform wear distribution across the cutting edge, extending usable life and lowering tool‑related downtime — a clear efficiency advantage in series production. Easy integration and predictable performance The insert’s form factor — round with a 16 designation and a 7° clearance — fits standard turning toolholders and allows straightforward implementation into existing toolrooms. The coated, indexable design simplifies inventory management: multiple cutting edges per insert reduce stocking complexity while maintaining high repeatability in component finishes. For process planning, the combination of chipbreaker, grade and coating offers a robust baseline for cutting data, making it easier to calculate cost‑per‑part and tool‑change intervals. Contact Metav Werkzeuge today for tailored advice on Walter Tools Tiger‑tec Silver inserts and to match the RCMT1606M0-RK4 WKK10S to specific cast‑iron applications Technical Data Article number: RCMT1606M0-RK4-WKK10S-WALTER Designation: RCMT1606M0-RK4 WKK10S Manufacturer: Walter Tools Facts Size: 16 mm Thickness: 6 Clearance angle: 7° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: RK4 Form: Round Coating: coated carbide Suitable for: cast iron FAQ What materials is this insert suitable for? The RCMT1606M0-RK4 WKK10S insert from Walter Tools is specifically optimised for cast iron machining and delivers stable performance under abrasive conditions. How does the RK4 chipbreaker affect production? The RK4 chipbreaker on the Walter Tools insert produces short, controllable chips that reduce machine stoppages and simplify post‑process handling. Can the insert be used in standard toolholders? Yes, the round RCMT form and the 16 designation allow the insert to be mounted in common turning toolholders designed for indexable round inserts. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1606M0-RK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process stability and economical wear behaviour for reliable, productive turning of cast iron. The RK4 chipbreaker and Tiger‑tec Silver coated grade deliver controlled chips and longer edge life — order the insert directly via Metav Werkzeuge or consult the technical team for application support. RCMT1606M0-RK4 WKK20S Turning Insert for Cast Iron — Tiger‑tec Silver (Walter Tools) A RCMT1606M0-RK4 WKK20S turning indexable insert engineered for productive cast iron machining with a round geometry and optimised chip control. Round insert RCMT1606M0-RK4 in 16 mm size Tiger‑tec Silver coated carbide grade WKK20S RK4 chipbreaker optimised for cast iron 7° clearance angle for stable cutting Consistent chip control for abrasive cast iron turning The round geometry combined with the RK4 chipbreaker provides reliable segmentation of short, brittle chips typical of cast iron. This results in stable cutting, fewer interruptions and improved cycle times in serial production. The insert’s form delivers a predictable contact zone between tool and workpiece, which reduces vibration and contributes to repeatable surface quality. As a consequence, process planning benefits from lower scrap rates and steadier machine loading. Extended tool life through Tiger‑tec Silver coated grade The insert uses the WKK20S carbide grade within the Tiger‑tec Silver coating family, a combination developed for abrasive materials. The coated carbide substrate improves wear resistance and maintains a sharp cutting edge for longer intervals, lowering tooling cost per part and supporting continuous operation. The grade is specifically tuned for cast iron applications, offering a balance between toughness and abrasion resistance so that tool changes become less frequent and productivity rises. Practical geometry and mounting advantages for workshop use With a nominal size of 16 mm and a 7° clearance angle, the round insert adapts well to different approach angles and turning strategies. The standard ISO designation facilitates selection for modular toolholders and quick indexable replacement. The form and tolerance class M ensure reliable seating and repeatability after indexing, supporting efficient setup routines. For applications demanding consistent chip breaking and surface integrity when turning cast iron, this insert is a practical choice that contributes to process security and high uptime. For productive cast iron machining with Walter Tools’ Tiger‑tec Silver inserts, contact Metav Werkzeuge for ordering and tailored technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number (SKU): RCMT1606M0-RK4-WKK20S-WALTER Designation: RCMT1606M0-RK4 WKK20S Product type: Turning indexable insert Manufacturer: Walter Tools Data Size: 16 Thickness code: 06 Clearance angle: 7° Shape: Round Chipbreaker: RK4 Tolerance class: M Special features Coating technology: Tiger‑tec Silver Carbide grade: WKK20S (coated carbide) Application focus: Cast iron machining Optimised for short, breaking chips Execution: T FAQ Which materials is this insert intended for? The RCMT1606M0-RK4 WKK20S insert is designed primarily for cast iron machining; the WKK20S grade within the Tiger‑tec Silver family is tuned for abrasive cast materials. What role does the RK4 chipbreaker play in machining? The RK4 chipbreaker segments short, brittle chips commonly produced when turning cast iron, improving chip evacuation and process stability during continuous cutting. Is the insert compatible with standard ISO toolholders? The RCMT designation follows ISO indexing for turning inserts; the round geometry and specified tolerance class enable fitment in compatible modular toolholders that accept RCMT inserts. How does the Tiger‑tec Silver coating benefit production runs? The Tiger‑tec Silver coating enhances wear resistance on abrasive cast iron, prolonging edge life and reducing the frequency of tool changes — this supports longer uninterrupted production cycles. Can this insert be used for stainless steel or aluminium? This grade is optimised for cast iron; for stainless steel or aluminium, selection of a grade and geometry tailored to those materials is recommended to ensure optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1606M0-RM4 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coated grade and the RM4 chipbreaker for reliable machining of stainless steels; the combination of stable chip control, low friction and a precise round geometry supports consistent production and longer tool life. Order directly via Metav Werkzeuge or consult our specialists for application advice. RCMT1606M0-RM4 WMP20G Drehwendeschneidplatte — Walter Tools (Tiger‑tec Gold, for stainless steels, round 16) A RCMT1606M0-RM4 WMP20G turning insert designed for stainless steel turning, combining Tiger‑tec Gold coating technology with an RM4 chipbreaker for secure chip formation and process stability in medium to robust conditions Tiger‑tec Gold coated grade WMP20G Optimised RM4 chipbreaker for stable chips 7° clearance angle reduces rubbing Round insert, size 16, tolerance class M Consistent edge performance for demanding stainless steel operations The WMP20G grade, part of the Tiger‑tec Gold series, is a coated carbide designed specifically for machining stainless steels. These materials typically display toughness, a tendency to form built-up edge and high heat generation; the coating and substrate balance in this grade supports stable chip formation and a resilient cutting edge, which reduces interruption from frequent index changes. The result is improved process efficiency and fewer tool changes, translating into measurable productivity gains on mixed or continuous production runs. Geometry and chip control that support repeatable quality The round insert geometry and the RM4 chipbreaker deliver controlled chip flow and consistent contact conditions at the cutting edge. The specified 7° clearance angle helps to limit flank rubbing and thermal load, promoting superior surface integrity on the workpiece. With tolerance class M, the insert maintains dimensional repeatability for predictable toolholder seating and interchangeability, which supports shorter setup times and steady part-to-part accuracy. Practical advantages for workshop integration and tooling systems The insert's format (round, size 16, thickness code 06) and the RCMT1606M0-RM4 designation make it compatible with common turning toolholders for indexable insert systems. The combination of coated carbide and chipbreaker reduces rework and contributes to consistent cycle times, especially in medium to robust cutting conditions. For production planners, the insert offers a balance of tool life and cutting reliability that helps to stabilise throughput while keeping maintenance intervals manageable. Contact Metav Werkzeuge for application-specific recommendations and to check insert compatibility; reach out by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: RCMT1606M0-RM4-WMP20G-WALTER Designation: RCMT1606M0-RM4 WMP20G Manufacturer: Walter Tools Product type: Turning insert (drehwendeschneidplatte) Facts Size: 16 Clearance angle: 7° Chipbreaker: RM4 Thickness code: 06 Tolerance class: M Special features Coating technology: Tiger·tec Gold (WMP20G coated carbide) Material group: M (suitable for stainless steels) Shape: Round insert Series: Tiger‑tec Gold FAQ What materials is this insert designed for? The RCMT1606M0-RM4 WMP20G is intended primarily for stainless steels, with the WMP20G grade optimised for secure chip formation and edge stability in those applications. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker provides controlled chip formation and evacuation, reducing the risk of entangling long chips and supporting consistent surface quality during turning. Is the insert suitable for heavy roughing or finishing operations? The coated carbide grade and geometry balance toughness and wear resistance to perform in medium to robust cutting conditions; finish quality will depend on cutting parameters and holder rigidity. What does tolerance class M mean for the end user? Tolerance class M ensures consistent insert dimensions and repeatable seating in compatible toolholders, which supports reliable tool indexing and stable part tolerances. Can this insert be used in standard indexable turning holders? Yes, the RCMT format and size 16 correspond to widely used turning systems; verification of seat type and clamping method is advised before use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, support@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1606M0-RM4 WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of proven thermal stability, reliable chip control and precise cutting geometry to improve process security and component quality; order directly via Metav Werkzeuge or consult our technical advisors for cutting data and optimal insert selection. Indexable insert RCMT1606M0-RM4 WSM20S — turning insert, Tiger·tec Silver, Walter Tools The RCMT1606M0-RM4 WSM20S is a round indexable turning insert designed for machining stainless steels and heat-resistant superalloys, offering a balance of thermal resistance and stable edge performance. Tiger·tec Silver coating for thermal stability Optimised RM4 chipbreaker for secure chips Round RCMT form, 16 mm inscribed diameter 7° clearance angle for consistent cutting Maximise process stability when machining tough alloys The combination of the Tiger·tec Silver coating and the WSM20S grade provides measurable benefits when working with high-strength, heat-prone materials. The coating enhances thermal resistance and reduces crater wear, while the substrate and coating interaction support a stable cutting edge under elevated temperatures. This results in fewer interruptions for tool changes and a more predictable machining cycle when tackling stainless steels and heat‑resistant nickel‑based alloys. Secure chip control and improved surface quality The RM4 chipbreaker geometry is configured to generate compact, controllable chips across a range of feeds and depths of cut. For operations that require consistent surface finish and reduced secondary operations, this geometry reduces the risk of built-up edge and irregular chip formation. The circular insert form contributes to even wear distribution, helping to maintain a steady profile and consistent part quality over longer runs. Reliable cutting geometry for repeatable performance Featuring a clearance of 7° and the standard RCMT form factor, the insert supports stable cutting forces and predictable engagement with the workpiece. The size designation (inscribed diameter 16) and plate thickness 06 give clear mounting expectations for toolholders specified for this insert family. As a result, set‑up time is shortened and the process window becomes easier to reproduce across different workstations. Application range and material suitability explained This insert is graded for machining both stainless steel (ISO group M) and heat‑resistant alloys and titanium (ISO group S). Stainless steels typically demand tools that prevent adhesion and cope with high ductility, while superalloys and titanics impose thermal and mechanical loads on the cutting edge. The WSM20S grade is tuned to these demands by balancing edge toughness and thermal stability, enabling efficient turning of difficult‑to‑machine components with fewer interruptions. Contact Metav Werkzeuge for tailored cutting data, availability of Walter Tools Tiger·tec Silver inserts and advice on optimal insert‑holder combinations — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: RCMT1606M0-RM4-WSM20S-WALTER Label: Drehwendeschneidplatte RCMT1606M0-RM4 WSM20S Walter Tools Product type: Turning indexable insert ISO designation: RCMT1606M0-RM4 WSM20S Brand: Walter Tools Facts Inscribed diameter: 16 Plate thickness: 06 Clearance angle: 7° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: RM4 Insert form: Round (RCMT) Series: Tiger·tec Silver Execution: T Material suitability: stainless steel (M), heat‑resistant alloys and titanium (S) FAQ What materials is this insert suitable for? The RCMT1606M0-RM4 WSM20S insert from Walter Tools is specified for stainless steel (ISO group M) and heat‑resistant alloys/titanium (ISO group S), offering a balance of edge toughness and thermal resistance. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces thermal attack and enhances edge stability, so the WSM20S grade maintains cutting performance longer under high temperatures typical of stainless and superalloy turning. Which chipbreaker should be selected for long turning cycles? The RM4 chipbreaker on this insert produces compact, manageable chips, making it suitable for extended turning cycles where consistent chip evacuation and surface finish matter. Is the RCMT form compatible with standard toolholders? The RCMT form (16 inscribed diameter, plate thickness 06) fits conventional indexable toolholders designed for RCMT inserts; verify seat and clamping compatibility with the chosen holder. What are the main production benefits of using this insert? Using the WSM20S grade with Tiger·tec Silver coating and the RM4 chipbreaker increases process stability, reduces unscheduled tool changes and supports consistent surface quality in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for clarification only; there is no affiliation between our company and the named brands. The offered article is an original factory‑new product of the manufacturer.
RCMT1606M0-RM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant Tiger·tec Silver grade, a stable RM4 chipbreaker and a round geometry for consistent machining of stainless steel and heat‑resistant superalloys — the result is improved process security and longer edge life. Order the insert via Metav Werkzeuge or consult our specialists for application‑specific recommendations. RCMT1606M0-RM4 WSM30S indexable turning insert — Tiger·tec Silver, RM4 chipbreaker | Walter Tools The RCMT1606M0-RM4 WSM30S is a round indexable turning insert designed for reliable cutting of stainless steel and heat‑resistant superalloys, combining a heat‑resistant Tiger·tec Silver grade with an RM4 chip control geometry for stable machining. Tiger·tec Silver coating for heat resistance RM4 chipbreaker for stable chip control 7° clearance for reliable cutting geometry Round insert Ø16 mm for versatile turning Consistent chip control and thermal resilience for stainless steel The insert’s combination of the WSM30S grade and Tiger·tec Silver coating is engineered for operations that generate high temperatures and sticky chips. The coated cemented carbide composition promotes stable chip formation, reducing the risk of built‑up edge and thermal damage during interrupted cuts. For machining stainless steel and similar materials, this chemistry supports longer edge life and more predictable tool change intervals, which in turn increases overall machine utilisation and reduces unplanned stoppages. The RM4 chipbreaker contributes actively to controlled chip segmentation, aiding safe evacuation in through‑turning and finishing passes. Geometry and tolerance designed for repeatable surface quality The round insert geometry, specified as Ø16 mm, paired with a 7° clearance angle and tolerance class M, delivers a robust cutting edge and reproducible positioning in the toolholder. The designation 06 indicates the insert thickness group, providing a stiff cutting edge that lowers vibration and improves surface finish on the workpiece. This geometry is particularly effective where consistent part tolerances and excellent surface integrity are required; the combination of form and tolerance supports reliable repeatability across batch runs and helps to maintain machining parameters between indexings. Application guidance and process advantages with Walter Tools technology Designed under the Tiger·tec Silver series philosophy, the insert suits operations on both the M and S ISO material groups — namely stainless steel and high‑temperature superalloys or titanium‑based workpieces. The WSM30S grade balances wear resistance with edge stability, enabling productive turning where heat resistance and chip control are decisive. For shops seeking to improve process security and extend dressing intervals, this insert offers a practical route to higher productivity without complex parameter changes. For selection of compatible clamping systems and optimal cutting data, reference toolholder specifications and trial cuts under representative conditions are recommended. For demanding turning of stainless steel and superalloys, choose the Walter Tools RCMT1606M0-RM4 WSM30S insert through Metav Werkzeuge — contact our application engineers for tailored cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RCMT1606M0-RM4-WSM30S-WALTER Label: Drehwendeschneidplatte RCMT1606M0-RM4 WSM30S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Inscribed circle: Ø16 mm Thickness designation: 06 Tolerance class: M Special features Grade: WSM30S (Tiger·tec Silver) Chipbreaker: RM4 Insert form: Round Material suitability: S / M (superalloys, stainless steel) Series: Tiger‑tec Silver Execution: T FAQ What materials is this insert suitable for? The RCMT1606M0-RM4 WSM30S insert is specified for ISO groups S and M, i.e. heat‑resistant superalloys and stainless steel, offering a balanced performance for both material classes. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker promotes controlled chip segmentation and evacuation, which helps maintain a stable cutting edge and reduces the likelihood of built‑up edge when turning difficult materials. Which series and coating technology does the insert use? This grade belongs to the Tiger·tec Silver series (WSM30S), a coated cemented carbide technology optimised for thermal resistance and edge stability. Is the round form advantageous for finishing or roughing? The round insert geometry provides a robust cutting edge and even wear distribution, making it suitable for a range of turning tasks from finishing to moderate roughing when correctly parameterised. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are quoted for explanation purposes only; no connection between Metav Werkzeuge and the mentioned brands is implied. The offered article is original and new from the listed manufacturer.
RCMT1606M0-RP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP10G grade for long tool life and consistent chip control in steel turning; order the insert via Metav Werkzeuge or consult our advisors for application-specific recommendations. RCMT1606M0-RP4 WPP10G indexable turning insert — Tiger·tec Gold, suited for steel (P) The RCMT1606M0-RP4 WPP10G is a round indexable turning insert designed for reliable steel machining, featuring the Tiger·tec Gold coated grade and an RP4 chipbreaker for stable performance. Tiger·tec Gold coated for long tool life RP4 chipbreaker for reliable chip control 7° clearance angle for smooth engagement Round RCMT16 with 6 mm thickness Longer tool life through balanced coating and grade The combination of Tiger·tec Gold coating with the WPP10G grade delivers a balance of wear resistance and toughness that supports extended tool life in steel turning. The coated carbide construction provides a barrier against flank wear and thermal stress during typical steel operations, which reduces the need for frequent insert changes and contributes to steady production flow. For production planners, this means fewer interruptions and a predictable replacement rhythm that improves overall machining economy. Predictable chip behaviour and stable cutting Built with the RP4 chipbreaker and a 7° relief angle, this insert promotes consistent chip control and stable cutting forces. The RP4 geometry is engineered to form chips suitable for interrupted and continuous cuts in unalloyed and alloyed steels, helping to prevent clogging and reduce the risk of tool edge damage. The round form of the insert inherently supports smooth engagement and is forgiving under varying cutting conditions, which increases process reliability and reduces scrap rates in daily workshop use. Flexible indexing and secure interchangeability The round RCMT geometry combined with a 6 mm plate thickness allows multiple effective cutting edges per insert, enabling cost-efficient indexing and straightforward handling. The tolerance class M ensures compatibility with standard toolholders and repeatable positioning at index changes. These characteristics simplify tool management in batch production or mixed-series work, while the insert’s execution and form keep setup time short and tool inventory streamlined. Application guidance for steel machining Classified for material group P, this grade is optimised for machining steels as defined by ISO 513, including unalloyed and alloyed steels. The WPP10G chemistry and Tiger·tec Gold technology are tuned to manage the heat and chip formation typical of steel cutting, offering a compromise between wear resistance (category 10) and toughness (category 30/35) for universal use. For best results, match the insert to appropriate holder geometry, cutting parameters and coolant strategy consistent with steel machining practices. Contact Metav Werkzeuge for tailored cutting data, application advice or a quotation for Walter Tools indexable inserts; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RCMT1606M0-RP4-WPP10G-WALTER SKU: RCMT1606M0-RP4-WPP10G-WALTER Designation: RCMT1606M0-RP4 WPP10G Manufacturer: Walter Tools Product type: Indexable turning insert Facts Size: 16 mm Thickness: 6 mm Relief angle: 7° Tolerance class: M Special features Grade: WPP10G (Tiger·tec Gold) Chipbreaker: RP4 Form: Round (RCMT) Material suitability: Steel (P) Series: Tiger·tec Gold Execution: T FAQ What steels is this insert best suited for? The RCMT1606M0-RP4 WPP10G is designed for the ISO material group P, covering unalloyed and alloyed steels commonly encountered in turning operations. How does the RP4 chipbreaker affect performance? The RP4 chipbreaker on this Walter Tools insert promotes reliable chip formation and evacuation, reducing the likelihood of built-up edge and improving process stability. Can this insert be indexed multiple times for cost efficiency? Yes, the round RCMT form and 6 mm thickness allow several cutting edges to be used sequentially, increasing usable life per insert and lowering tool costs. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
RCMT1606M0-RP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, RP4 chipbreaker geometry and a dedicated steel application for consistent chip control and extended edge life; order the insert via Metav Werkzeuge or consult our specialists for process optimisation. RCMT1606M0-RP4 WPP20G — Turning indexable insert, Tiger‑tec Gold, for steel (Walter Tools) RCMT1606M0-RP4 WPP20G is a round turning insert designed for general steel turning with a robust chipbreaking geometry Tiger‑tec Gold coated carbide grade RP4 chipbreaker for medium feeds 7° clearance angle for reduced rubbing Round form for profile versatility Reliable cutting performance for steel applications The RCMT1606M0-RP4 WPP20G insert combines the Tiger‑tec Gold coating with a coated carbide substrate to deliver improved wear resistance and thermal stability in turning operations on steel. The combination of a wear‑resistant coating and a geometry optimised for chip control reduces the frequency of index changes and supports longer uninterrupted cycles. This results in measurable productivity gains and a more predictable tool life in batch production and series turning. Consistent chip control and stable cutting conditions The RP4 chipbreaker is tuned for a broad range of cutting parameters, enabling reliable chip segmentation and evacuation during medium‑duty turning. Together with a 7° clearance the insert minimises frictional contact and heat build‑up at the cutting edge, which helps preserve surface finish and dimensional stability. For workshops seeking process consistency, this geometry supports repeatable results across varying feed rates and cutting depths. Robust design for straightforward integration The insert’s round form and standard RCMT geometry allow straightforward mounting in commonly used toolholders, while the nominal 16 mm size and 06 thickness maintain rigidity for stable turning. Tolerance class M ensures consistent fit and interchangeability in standard clamping systems. The grade is flagged for steel work under ISO classification, making material selection and process planning more transparent for production engineers and buyers. Practical benefits and process advice By selecting this grade, shops gain a balance of wear resistance and toughness—suitable for a wide spectrum of steels from less alloyed to more demanding grades. The coated carbide substrate helps withstand thermal loads, while the chipbreaker simplifies swarf handling. When integrating into existing processes, moderate increases in cutting speed compared with uncoated grades can be trialled to exploit the coating’s thermal protection; consult Metav Werkzeuge for parameter recommendations tailored to the specific machine and material mix. For reliable turning performance with extended edge life, specify this Walter Tools Tiger‑tec Gold insert and contact Metav Werkzeuge for tailored technical advice and supply coordination Technical data Article number: RCMT1606M0-RP4-WPP20G-WALTER Designation: RCMT1606M0-RP4 WPP20G Manufacturer: Walter Tools Product type: Turning indexable insert Series: Tiger‑tec Gold Core specifications Free (clearance) angle: 7° Plate size: 16 Plate thickness: 06 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: RP4 Shape: Round Material application: Steel (ISO group P) Execution: T FAQ What materials is this insert intended for? The insert is developed for machining steel (ISO group P); the WPP20G grade is optimised for typical heat and chip formation when turning steel. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating on the insert increases wear resistance and thermal stability, which supports longer edge life and more consistent cutting when machining a variety of steel grades. Is the RP4 chipbreaker suitable for finishing passes? The RP4 chipbreaker is designed for medium feeds and good chip control; it supports stable cuts and acceptable surface quality but parameter adjustment may be needed for fine finishing operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com