RDHW2006M0-A57 WHH15X Wendeplatten - Walter Tools
Die Kombination aus präziser Schneidkante, beschichtetem Hartmetall und einer 15° Freiwinkelgeometrie sorgt für konstante Zerspanungsergebnisse und lange Standzeiten. Bestellen Sie die passende Ausführung direkt über Metav Werkzeuge oder kontaktieren Sie unsere Fachberater für Anwendungsempfehlungen. RDHW2006M0-A57 WHH15X — Indexable milling insert with 15° relief (Walter Tools) The RDHW2006M0-A57 WHH15X is a coated carbide indexable milling insert designed for versatile milling tasks where predictable chip control and repeatable edge performance are required Coated carbide grade WHH15X 15° relief angle for flexible application Round insert geometry for secure seating Integrated chipbreaker A57 Consistent cutting performance for industrial milling The coated carbide grade WHH15X delivers a balance between wear resistance and reliable edge stability. As a coated carbide insert, it reduces flank wear under steady cutting conditions and supports consistent surface quality during batch production. The integrated chipbreaker A57 is engineered to influence chip form and evacuation, which in turn lowers the risk of re-cutting and promotes predictable cycle times. For production planning, the combination of a defined relief geometry and a robust coating contributes directly to process stability and reduced tool-change frequency. Simple assembly and predictable handling in tool systems The round plate geometry and standardised ISO designation allow straightforward integration into toolholders that accept this insert family. The 15° relief angle helps to moderate cutting forces and can be advantageous in applications that require a compromise between edge strength and cutting penetration. Where alignment and seating are critical, the radial form offers repeatable positioning, leading to fewer setting corrections and more uptime on the shop floor. Check the product matrix for exact holder compatibility before ordering. Economical machining through durability and chip control Durability is delivered through the coated carbide substrate and the insert’s optimized geometry, which together support longer tool life and improved cost-efficiency per component. The chip management provided by the A57 breaker reduces vibration and surface irregularities, enabling higher material removal rates in suitable operations. While material suitability should be verified against the manufacturer’s matrix, the overall design focuses on lowering total machining costs by extending intervals between indexings and replacements. For application advice or to order Walter Tools inserts such as the RDHW2006M0-A57 WHH15X, contact Metav Werkzeuge for fast delivery and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: RDHW2006M0-A57-WHH15X-WALTER Label: Fräswendeschneidplatte RDHW2006M0-A57 WHH15X Walter Tools Manufacturer: Walter Tools Facts Plate size: 20 Plate thickness: 06 Relief angle: 15° Tolerance class: H Special features Grade: WHH15X (coated carbide) Chipbreaker: A57 Series: Walter Schneidstoffsorte - Serie offen Execution: W Plate form: Rund Material: Katalogabhängig ISO designation: RDHW2006M0-A57 WHH15X FAQ What materials is the RDHW2006M0-A57 WHH15X suitable for? Suitability depends on the specific machining matrix; the RDHW2006M0-A57 WHH15X is a coated carbide insert and material compatibility should be checked against Walter Tools’ product matrix before use. What benefit does the 15° relief angle provide? The 15° relief angle reduces rubbing on the flank and helps balance cutting penetration with edge strength, offering more predictable forces and improved surface finish in many milling applications. How does the A57 chipbreaker influence machining? The A57 chipbreaker supports controlled chip formation and evacuation, which decreases the likelihood of re-cutting and contributes to stable cycle times and improved surface integrity. Is the insert compatible with standard ISO toolholders? The ISO designation RDHW2006M0-A57 WHH15X defines the geometry; compatibility requires a holder designed for this insert family and should be verified against the toolholder specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names, including Walter Tools, are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is original factory-new merchandise of the manufacturer.
RDHX0501M0-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the WHH15X grade and the 15° clearance geometry to achieve stable cutting and predictable edge life in milling operations; for application-specific advice or ordering options contact Metav Werkzeuge or consult the technical team. RDHX0501M0-A57 WHH15X milling indexable insert — round form, 15° clearance, Walter Tools The RDHX0501M0-A57 WHH15X is a coated carbide milling insert designed for versatile milling operations where predictable chip control and reliable edge retention are required; material suitability should be checked against the manufacturer’s product matrix. Coated carbide WHH15X grade 15° clearance angle for stable cutting Round form for versatile cutter designs Chipbreaker A57 for consistent chip control Extended durability through optimised grade and coating The core advantage of the WHH15X grade is its coating on cemented carbide, which supports wear resistance and consistent performance under varied cutting conditions. The coated substrate reduces flank wear and extends tool life compared with uncoated alternatives, translating into fewer indexings and longer productive runs. The tolerance class H guarantees dimensional consistency for high-speed operations and simplifies tool-set preparation, which benefits process reliability and repeatability on production lines. Geometry tailored for flexible milling setups A 15° clearance angle combined with the round form gives this insert smooth entry characteristics and the possibility of multi-edge indexing, ideal for operations that demand quick edge changes. The chipbreaker A57 is engineered to manage chip formation effectively across a range of cutting depths, helping to avoid built-up edge and promoting consistent surface finish. Designations such as size 05 and thickness 01 indicate the nominal insert geometry commonly used in modular cutter bodies; match these to the cutter seat when planning tool assemblies. Practical guidance for process integration Although the insert provides broad utility, material compatibility must be verified against the product matrix to ensure optimal cutting data and coolant strategy. The coated carbide construction suits many general-purpose milling roles, but testing under actual process conditions is advised to determine cutting speeds and feeds that yield the best balance of productivity and tool life. The round shape and robust chip control reduce vibration sensitivity in interrupted cuts, supporting steadier surface quality and fewer scrap parts. For tailored recommendations on integrating the Walter Tools RDHX0501M0-A57 WHH15X insert into existing tooling systems or to confirm material suitability, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss technical details and availability. Technical Data SKU: RDHX0501M0-A57-WHH15X-WALTER ISO designation: RDHX0501M0-A57 WHH15X Product type: milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Execution: X Bezeichnung without grade: RDHX0501M0-A57 Core data Free angle: 15° Plate size: 05 Plate thickness: 01 Tolerance class: H Special features Grade: WHH15X (coated carbide) Chipbreaker: A57 Plate form: round Material designation: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability depends on the chosen cutting data and the product matrix; the WHH15X grade is a coated cemented carbide and its performance should be checked against the manufacturer’s matrix for specific materials. How does the A57 chipbreaker affect machining? The chipbreaker A57 promotes controlled chip formation and evacuation, improving surface finish and reducing risk of built-up edge under appropriate cutting conditions. Can the round form be used in different cutter bodies? Yes, the round plate form enables flexible integration into various cutter designs and supports multi-edge indexing to extend usable life per insert. What does tolerance class H indicate? Tolerance class H denotes a dimensional tolerance suitable for consistent seating in precision tool holders, which helps maintain concentricity and repeatable cutting geometry. Is the WHH15X grade coated or uncoated? WHH15X is specified as a coated carbide grade, combining a hard substrate with a wear-resistant coating for extended edge life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation or endorsement.
RDHX0702M0-A57 WHH15X Wendeplatten - Walter Tools
Fräswendeschneidplatte RDHX0702M0-A57 WHH15X von Walter Tools Die RDHX0702M0-A57 WHH15X Fräswendeschneidplatte ist eine runde, indexierbare Schneideinlage für produktive Zerspanungsvorgänge mit kontrollierter Spanformung und hohem Anspruch an Maßhaltigkeit Beschichtetes Hartmetall WHH15X für Produktivität 15° Freiwinkel für sichere Spanabfuhr Rundplatte Größe 07, Dicke 02 für Indexierung Spanbrecher A57 für kontrollierte Spanformung Toleranzklasse H für hohe Maßgenauigkeit Höhere Prozesssicherheit und Standzeit Die Kombination aus beschichtetem Hartmetall der Sorte WHH15X und dem speziell gestalteten Spanbrecher A57 sorgt für stabile Spanbildung und gleichmäßige Abnutzung der Schneidkante. Durch den reduzierten Reibwert der Beschichtung werden Schnittkräfte gesenkt, was die Standzeit verlängert und Stillstandszeiten reduziert. Der 15° Freiwinkel unterstützt dabei die Spanabfuhr und verringert Aufbauschneiden, wodurch die Produktivität bei Serienfertigung steigt. Vielseitige Einsatzmöglichkeiten und Planungssicherheit Die Wendeplatte eignet sich als Baustein in modularen Frässystemen, wenn eine robuste, wiederholgenaue Einlage gefragt ist. Da die konkrete Werkstoffeignung von der Produktmatrix abhängt, empfiehlt sich eine kurze Abstimmung mit der technischen Dokumentation oder Beratung, um die optimale Kombination aus Schnittdaten und Kühlung zu wählen. So lässt sich die Effizienz im Fertigungsprozess zuverlässig planen. Passgenauigkeit und Einbauvorteile Die runde Plattenform in Größe 07 und die Plattendicke 02 ermöglichen einfache Indexierung und schnellen Wechsel ohne aufwändige Nachjustage. Die Toleranzklasse H garantiert hohe Maßtreue bei wiederholter Montage, was besonders in automatisierten Werkzeugplatten relevant ist. Materialangabe ist katalogabhängig; daher ist auf die passende Ausführung im Bestellfall zu achten, um Passung und Leistung sicherzustellen. Empfehlung: Die WHH15X-Fräswendeschneidplatte von Walter Tools eignet sich besonders für Anwender, die produktive, wiederholgenaue Zerspanung mit kontrollierter Spanabfuhr benötigen — bei Fragen zur Anwendung erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: RDHX0702M0-A57-WHH15X-WALTER Bezeichnung: RDHX0702M0-A57 Wendeplatte ISO Bezeichnung: RDHX0702M0-A57 WHH15X Marke: Walter Tools Produktart: Fräswendeschneidplatte Daten Freiwinkel: 15° Plattenform: Rund Plattengröße: 07 Plattendicke: 02 Spanbrecher: A57 Toleranzklasse: H Besonderheiten WHH15X: beschichtetes Hartmetall, universelle Schneidstoffsorte A57: Spanbrecher, kontrollierte Spanformung Katalogabhängig: Materialangabe je nach Ausführung prüfen Ausführung: X FAQ Welche Vorteile bietet die WHH15X-Beschichtung? Die WHH15X-Beschichtung der Fräswendeschneidplatte von Walter Tools reduziert den Reibwert und erhöht die Standzeit, wodurch sich Stillstandszeiten in der Fertigung verringern. Für welche Maschinen ist die RDHX0702M0-A57 geeignet? Die RDHX0702M0-A57 Wendeplatte ist für modulare Frässysteme mit indexierbaren Plattenaufnahmen vorgesehen; genaue Kompatibilität ist anhand der Werkzeugaufnahme und der Herstellerdaten zu prüfen. Wie unterstützt der Spanbrecher A57 die Bearbeitung? Der Spanbrecher A57 formt die Späne gleichmäßig und fördert die Abfuhr, was Schnittstabilität und Oberflächenqualität verbessert. Was bedeutet die Toleranzklasse H für die Anwendung? Toleranzklasse H steht für hohe Maßgenauigkeit bei der Plattengeometrie, was wiederholgenaue Montage und konstante Bearbeitungsergebnisse ermöglicht. Wo finde ich Informationen zur Werkstoffeignung? Die Werkstoffeignung für die RDHX0702M0-A57 WHH15X Fräswendeschneidplatte ist in der Produktmatrix des Herstellers dokumentiert; bei Unklarheiten hilft die technische Beratung von Metav Werkzeuge weiter. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
RDHX07T1M0-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of a balanced combination of coated-carbide performance, consistent chip control and straightforward tool logistics for reliable milling results; order the insert via Metav Werkzeuge or consult our technical advisers for application-specific guidance. RDHX07T1M0-A57 WHH15X — Milling indexable insert, 15° free angle (Walter Tools) A RDHX07T1M0-A57 WHH15X indexable milling insert designed for general milling and finishing operations where consistent chip formation and predictable tool life are priorities Coated carbide grade WHH15X Round insert, size 07 15° free angle for improved access Chipbreaker A57 for uniform chips Precise chip control for steady productivity The coated-carbide grade WHH15X combines a tailored coating with a substrate formulated for consistent wear behaviour. With the integrated chipbreaker A57, the insert produces predictable, uniform chips that reduce secondary operations and machine downtime. This translates into measurable efficiency: fewer interruptions for chip clearing and a steadier machining rhythm. The design supports both finishing passes and light semi-finishing, helping to lower overall machining costs by improving process stability and repeatability. Compact geometry that eases setup and tool handling The round insert with size 07 and T1 thickness offers a compact footprint while retaining sufficient cutting edge for reliable engagement. The 15° free angle improves approach clearance on complex contours and reduces rubbing in narrow pockets, which protects the cutting edge and the workpiece. Tolerance class H ensures consistent seating in standard toolholders, simplifying inventory and reducing set-up time during tool changes. Together these attributes simplify tool logistics and support leaner workshop processes. Application guidance and material suitability This indexable insert is produced as a coated hardmetal grade; material suitability should be checked against the specific product matrix before selection. Where workpiece materials and cutting conditions vary, the WHH15X grade offers a broad performance window, but verification against recommended parameters ensures optimal results. For cutting data recommendations and the most compatible toolholders, Metav Werkzeuge’s technical team can provide tailored guidance, helping to match spindle speeds and feeds to the intended operation. Reliability and brand provenance for demanding workflows Produced under the Walter Tools umbrella, this insert benefits from a manufacturer known for precision tooling and process-orientated development. The combination of a stable cutting edge and repeatable performance supports high process security in serial production. Choosing a well-tested grade reduces the risk of unexpected wear and contributes to consistent surface quality, supporting quality assurance regimes and predictable throughput in continuous machining environments. For reliable, application-matched tooling choose the Walter Tools RDHX07T1M0-A57 WHH15X and contact Metav Werkzeuge for availability and tailored machining advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RDHX07T1M0-A57-WHH15X-WALTER Product type: Milling indexable insert Brand: Walter Tools ISO designation: RDHX07T1M0-A57 WHH15X Designation without grade: RDHX07T1M0-A57 Core measurements Free angle: 15° Insert size: 07 Thickness: T1 Tolerance class: H Special features Grade: WHH15X (coated hardmetal) Chipbreaker: A57 Shape: Round Execution: X Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig FAQ What materials is this insert suitable for? The insert’s WHH15X coated hardmetal grade is designed for a broad range of materials; compatibility should be confirmed using the product matrix and the RDHX07T1M0-A57 WHH15X specifications. How does the chipbreaker A57 affect machining? The A57 chipbreaker produces consistent chip forms, improving evacuation and reducing the need for secondary cleaning operations when using the RDHX07T1M0-A57 WHH15X milling insert. Can the RDHX07T1M0-A57 WHH15X be used for finishing and semi-finishing? Yes, the insert’s geometry and coating balance wear resistance and edge stability, making it suitable for finishing and light semi-finishing passes in appropriate materials. Which tolerance class and thickness are specified for the insert? The insert is supplied in tolerance class H with a thickness of T1, ensuring reliable seating and repeatable clamping in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
RDHX07T1M0-A57 WKK25G WKK25G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating and the A57 chipbreaker, this insert offers durable wear resistance and reliable chip control for cast iron milling; order the RDHX07T1M0-A57 WKK25G directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. RDHX07T1M0-A57 WKK25G milling indexable insert — Tiger·tec Gold grade for cast iron — Walter Tools A precision milling indexable insert designed for productive cast iron machining, combining a round geometry with a 15° clearance for stable engagement in demanding operations. Tiger·tec Gold coating for wear resistance Optimised A57 chipbreaker for cast iron chips 15° clearance for reliable edge engagement Size 07, T1 thickness for compact toolholders Longer life and consistent edge stability for heavy use The WKK25G grade, part of the Tiger·tec Gold series, is a coated carbide solution optimised for the abrasive nature of cast iron. The multilayer coating and substrate pairing provide improved wear resistance, which extends tool life under intermittent cutting and short, breaking chip conditions. This results in fewer insert changes and more predictable production cycles. The insert’s H tolerance and specified geometry support consistent tool setting and repeatable performance across serial production, enhancing overall process reliability. Predictable chip control and secure cutting performance A core benefit of this design is the A57 chipbreaker, tailored to control brittle, short chips typical of cast iron. Combined with the round geometry and 15° clearance, the insert delivers steady cutting forces and reduced tendency for chatter. The compact T1 thickness and size 07 format allow integration into tight toolholders while maintaining edge strength. These features translate into improved surface finishes and reduced rework, supporting quicker cycle times and increased throughput on medium- to high-productivity milling operations. Practical integration, selection and application advice The RDHX07T1M0-A57 series is supplied in execution X with a tolerance class H, making it suitable for standard toolholder systems that accept round inserts. Material classification indicates primary suitability for cast iron; use in other materials is not specified here. For optimal results, match the insert to appropriate cutting parameters and machine stiffness, and consider Walter Tools' established reputation for process security when selecting grades for production tasks. If additional technical data or application-specific recommendations are required, Metav Werkzeuge is available to advise — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed assistance. For reliable cast iron milling with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge to discuss the RDHX07T1M0-A57 WKK25G and find the best configuration for the application Technical data Article number: RDHX07T1M0-A57-WKK25G-WALTER Label: Fräswendeschneidplatte RDHX07T1M0-A57 WKK25G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Facts Free angle: 15° Plate size: 07 Plate thickness: T1 Tolerance class: H Geometry: Round Special features Series: Tiger·tec Gold Grade: WKK25G Chipbreaker: A57 Material application: Cast iron (K) Execution: X ISO designation: RDHX07T1M0-A57 WKK25G FAQ Is this insert suitable for machining cast iron? Yes. The RDHX07T1M0-A57 WKK25G milling indexable insert by Walter Tools is specifically formulated for cast iron applications, with the WKK25G grade and A57 chipbreaker optimised for abrasive, short-chip behaviour. What makes the Tiger·tec Gold grade different? The Tiger·tec Gold technology combines a tailored coating and substrate to improve wear resistance and edge stability under the intermittent and abrasive cutting conditions common in cast iron machining. Can the RDHX07T1M0-A57 be used in compact toolholders? Yes. The size 07 and T1 thickness allow use in compact toolholder designs while maintaining sufficient edge strength for productive cutting. How does the A57 chipbreaker affect machining results? The A57 chipbreaker promotes controlled, short chips and stabilises cutting forces, which helps to reduce vibrations and improves surface quality in cast iron milling. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation or endorsement beyond the sale of original, factory-new goods of the respective manufacturer.
RDHX07T1M0-A57 WKP25S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating with the WKP25S grade to achieve durable cutting edges and reliable chip control for steel and cast iron machining; order directly via Metav Werkzeuge or ask our consultants for application advice. RDHX07T1M0-A57 WKP25S milling insert — for steel and cast iron | Walter Tools The RDHX07T1M0-A57 WKP25S is a round milling insert designed for productive machining of steel and cast iron, optimised for consistent chip formation and long tool life. Tiger·tec Silver coating for extended tool life Optimised A57 chipbreaker for reliable chip control Round 07 form with 15° relief for versatile milling Suitable for steel and cast iron machining Consistent performance for demanding metalcutting The insert from the Tiger·tec Silver series delivers consistent cutting performance across interrupted and continuous cuts. Thanks to the WKP25S grade and a robust coated carbide substrate, the tool maintains its edge and reduces flank wear, which supports predictable tool-change intervals and higher uptime. The round geometry and 15° relief provide a stable engagement with the workpiece, enabling reliable material removal rates while preserving surface quality. This balance between durability and stability is particularly useful in batch production where repeatability matters. Reliable chip control and reduced machining risk Built around the A57 chipbreaker, the insert controls chip formation for both long and short chips typical of steel and cast iron. Controlled chips reduce the risk of re-cutting and tool blockages, improving process safety and lowering downtime. The combination of the chipbreaker and the Tiger·tec Silver surface treatment decreases built-up edge and supports a steady cutting temperature; the result is improved tool life and consistent component finish. For shops seeking fewer interruptions and more predictable cycle times, this configuration is a practical choice. Broad material coverage with straightforward application Engineered for workpiece groups P and K, the insert is suitable for a wide range of steels and grey or nodular cast irons. The round form in size 07 and the thin T1 geometry allow adaptable usage across grooving and face-milling operations where a compact cutting edge or tight corner access is required. As the grade addresses the thermal and abrasive demands of these materials, the insert helps to maintain process reliability and component tolerance, making it suitable for both stable and slightly variable setups in modern machining centres. Contact Metav Werkzeuge today to discuss how the Walter Tools Tiger·tec Silver WKP25S grade fits specific machining tasks and to arrange supply through our technical sales team, who can advise on insert selection and application Technical Data Article number: RDHX07T1M0-A57-WKP25S-WALTER Product type: milling insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WKP25S ISO designation: RDHX07T1M0-A57 WKP25S Facts Relief angle: 15° Insert size: 07 Thickness: T1 Tolerance class: H Form: Round Chipbreaker: A57 Applications & Features Material compatibility: Steel (P), Cast iron (K) Coating / substrate: Tiger·tec Silver coated cemented carbide Execution: X Label: Fräswendeschneidplatte RDHX07T1M0-A57 WKP25S Walter Tools UID / SKU: RDHX07T1M0-A57-WKP25S-WALTER FAQ What materials is this insert suitable for? The RDHX07T1M0-A57 WKP25S milling insert by Walter Tools is designed primarily for steel (P) and cast iron (K) applications, matching the thermal and abrasive requirements of these groups. What is the benefit of the A57 chipbreaker on this insert? On the RDHX07T1M0-A57 WKP25S, the A57 chipbreaker provides controlled chip formation to reduce re-cutting and the risk of chip-related interruptions, improving process security and surface consistency. Which coating and grade does this insert use? The RDHX07T1M0-A57 WKP25S belongs to the Tiger·tec Silver series and uses the WKP25S coated carbide grade for enhanced edge stability and wear resistance. What are the geometric characteristics of the insert? The RDHX07T1M0-A57 WKP25S is a round form insert in size 07 with a 15° relief and a T1 thickness, suitable for versatile milling operations where compact engagement is required. For which machining tasks is this insert recommended? The RDHX07T1M0-A57 WKP25S is recommended for productive milling of steel and cast iron where reliable chip control and long tool life are priorities; specific application windows are catalogue- and geometry-dependent. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Stainless Steel durch rostfreien Stahl Steel durch Stahl Brass durch Messing Wood and Plastic durch Holz und Plastik Stainless durch rostfrei
RDHX07T1M0-A57 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and a compact, round geometry for reliable milling productivity; the insert’s compatibility with steel and cast iron reduces tool inventory and keeps cycle times steady. For application advice or to place an order, contact Metav Werkzeuge or request consultancy from their technical team. RDHX07T1M0-A57 WKP35G milling insert — round geometry, 15° relief, Walter Tools A RDHX07T1M0-A57 WKP35G milling insert designed for robust steel and cast iron machining, combining Tiger‑tec Gold coated carbide with a controlled A57 chipbreaker for stable cutting. Tiger‑tec Gold coating for wear resistance Optimised for steel and cast iron (ISO P/K) 15° relief angle for secure cutting Round insert 07 with A57 chipbreaker Consistent wear resistance for longer production runs The WKP35G grade, produced with Tiger‑tec Gold coating, provides a high level of wear resistance and stable cutting-edge behaviour under typical milling loads. As a coated carbide solution, the insert is engineered to withstand the thermal and abrasive stresses encountered when machining steels and cast irons. The result is fewer tool changes and a more predictable process, which supports continuous operation and reduces unplanned downtime. Broad material compatibility reduces tool inventory Designed for the ISO groups P and K, the insert covers a broad range of applications in steel and cast iron machining. This dual compatibility allows a single insert geometry and grade to be applied across multiple workpiece materials, simplifying tool selection and storage. For production environments that run mixed batches, this versatility translates into lower inventory complexity and faster job set‑ups while maintaining consistent chip formation and surface quality. Geometry and chip control for secure milling The round geometry combined with a 15° relief angle and the A57 chipbreaker ensures reliable performance in interrupted cuts and varying engagement conditions. Round inserts offer increased edge strength and a forgiving contact profile, which reduces the risk of edge chipping in heavy or shock‑prone milling operations. The A57 chipbreaker is formed to promote controlled chip segmentation for the specified material groups, supporting safe chip evacuation and steady surface finish with each cut. Productivity benefits and production economics Compact dimensions (size 07, thickness T1) and a robust tolerance class H make the insert suitable for repeatable, high‑volume machining tasks where process reliability is crucial. The coated grade and secure geometry contribute to extended tool life and consistent results, lowering per‑component tooling costs and minimising stoppages for indexing or replacement. These factors together enhance throughput and support predictable manufacturing schedules in workshop and industrial settings. For detailed application recommendations on Walter Tools Tiger‑tec Gold inserts or to discuss suitable cutter bodies and machining parameters, contact Metav Werkzeuge for expert assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: RDHX07T1M0-A57-WKP35G-WALTER Label: Fräswendeschneidplatte RDHX07T1M0-A57 WKP35G Walter Tools Manufacturer: Walter Tools Core data Relief angle: 15° Size: 07 Thickness: T1 Tolerance class: H Materials & special features Grade/series: Tiger‑tec Gold / WKP35G Coating: Tiger‑tec Gold (coated carbide) Material compatibility: P (steel), K (cast iron) Chipbreaker: A57 Geometry: round insert Execution: X Story trigger: wendeplatten FAQ Which materials can this insert machine effectively? The RDHX07T1M0‑A57 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining a wide range of steel and cast iron materials. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WKP35G grade increases wear resistance and process stability, which helps the insert maintain cutting performance and extend service life under typical milling conditions. Why is the round geometry advantageous for milling? Round inserts offer enhanced edge strength and are less sensitive to impact during interrupted cuts; the RDHX07T1M0‑A57 design helps secure the cutting edge and supports consistent machining results. What is the role of the A57 chipbreaker? The A57 chipbreaker is engineered to promote controlled chip breakage and evacuation for steel and cast iron, improving surface finish and reducing the risk of chip‑related issues during milling. How does the 15° relief angle influence cutting behaviour? A 15° relief angle provides a balance between cutting engagement and support behind the cutting edge, contributing to stable tool life and reduced edge wear in typical milling applications. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only; no connection between our company and the named brands is implied. The offered article is original, factory‑new merchandise.
RDHX07T1M0-A57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of cost-effective productivity, the Tiger‑tec Silver coating and the 15° clearance for reliable chip control; order the RDHX07T1M0-A57 WKP35S directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Fräswendeschneidplatte RDHX07T1M0-A57 WKP35S — indexable milling insert, Tiger‑tec Silver, for steel and cast iron (Walter Tools) The RDHX07T1M0-A57 WKP35S is an indexable milling insert optimised for productive machining of steel and cast iron, combining coated carbide performance with a round geometry for secure chip formation Tiger‑tec Silver coating for extended life Designed for steel and cast iron machining 15° clearance angle for consistent cutting Round 07 form with A57 chipbreaker Deliver consistent chip control in steel and cast iron The insert is specified for the machining groups P (steel) and K (cast iron) according to ISO 513, which means the grade and geometry are designed to manage the heat and chip behaviour typical of these materials. The WKP35S grade is a coated carbide designed to provide stable cutting performance under mixed production loads. With the A57 chipbreaker and a 15° clearance angle, the geometry supports predictable chip segmentation and evacuation, reducing the risk of re-cutting and improving surface consistency on workpieces produced in series. Designed to raise productivity and reduce downtime Built within the Tiger‑tec Silver family, the insert focuses on process security and long tool life, which contribute to lower overall machining costs. The coated substrate delivers wear resistance in abrasive conditions often encountered with cast iron and many steel grades, so tool-change intervals are extended and machine uptime improves. This balance of robust cutting edge and coating performance suits applications where repeatable results and cycle-time reliability are priorities. Practical handling and integration into existing tooling systems The round insert form and standard designation make integration into compatible indexable cutter bodies straightforward; the designation RDHX07T1M0‑A57 indicates the geometry and mounting form, and the grade WKP35S identifies the coating and substrate technology. For users less familiar with insert selection: the designation groups geometry, thickness (T1), chipbreaker (A57) and size (07), enabling correct pairing with cutter holders that accept round 07 inserts for secure clamping and concentricity. Why the Tiger‑tec Silver technology is relevant in demanding jobs Tiger‑tec Silver technology focuses on consistent performance across a broad range of steels and cast irons, combining coating characteristics that improve thermal and abrasive resistance. This results in steady tool life and predictable machining behaviour, which is particularly beneficial for small-batch changeovers and larger production runs where process stability is economically valuable. The WKP35S grade emphasises balanced wear control and edge robustness to maintain surface quality and dimensional repeatability. For application advice, availability or tailored recommendations concerning Tiger‑tec Silver inserts, contact Metav Werkzeuge directly to discuss the RDHX07T1M0-A57 WKP35S and its suitability for specific machining tasks Technical data Article number: RDHX07T1M0-A57-WKP35S-WALTER SKU: RDHX07T1M0-A57-WKP35S-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 15° Size: 07 Thickness: T1 Tolerance class: H Materials & features Grade: WKP35S Series: Tiger‑tec Silver Applicable materials: P / K (steel and cast iron) Shape: Round Chipbreaker: A57 Execution: X FAQ What materials is this insert suitable for? The RDHX07T1M0-A57 WKP35S is specified for steel (P) and cast iron (K) machining in accordance with ISO 513; the WKP35S grade and A57 chipbreaker are tuned to these groups. What does the designation RDHX07T1M0-A57 WKP35S mean? The designation describes the insert geometry (round form, size 07), thickness (T1), chipbreaker type (A57) and the cutter grade (WKP35S) within the Tiger‑tec Silver family, indicating its intended cutting characteristics. Is the A57 chipbreaker suitable for continuous production? Yes, the A57 chipbreaker is designed for consistent chip formation in steel and cast iron, supporting serial production by promoting reliable chip evacuation and reducing interruptions. Can this insert be used for stainless steel? Stainless steel is not listed among the specified application groups for this insert; the RDHX07T1M0-A57 WKP35S is optimised for steel and cast iron, and use on stainless steel is not specified in the provided data. How does the Tiger‑tec Silver series improve performance? Tiger‑tec Silver combines a coated carbide substrate with surface technology that enhances thermal and abrasive resistance, delivering improved tool life and stable cutting performance across a range of steels and cast irons. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used here for identification and explanation only. There is no affiliation or connection between Metav Werkzeuge and the manufacturers beyond distribution. The offered item is original and factory-new from the stated manufacturer.
RDHX1003M0-A57 WHH15X Wendeplatten - Walter Tools
Benefit from a reliable combination of coated carbide performance, stable chip control and a positive 15° rake for secure engagement; the result is predictable milling and improved process stability. Order or request a machining consultation directly via Metav Werkzeuge for tailored parameter advice. RDHX1003M0-A57 WHH15X milling insert — 15° rake, A57 chipbreaker by Walter Tools A RDHX1003M0-A57 WHH15X round milling insert designed to deliver consistent chip formation and dependable performance in general milling operations. Coated carbide grade WHH15X 15° rake angle for positive engagement Round insert, 10 mm diameter A57 chipbreaker for consistent chips Predictable chip control for reliable production The combination of a coated carbide grade and the A57 chipbreaker is designed to provide stable chip formation under varying cutting conditions. The chipbreaker geometry reduces the risk of long, tangled chips and supports safer chip evacuation, which in turn contributes to fewer interruptions at the machine and more consistent cycle times. For process planners and shopfloor engineers this translates into improved machine uptime and easier handling during continuous milling. Positive engagement and cutting security A 15° rake promotes a positive entry into the workpiece, lowering cutting forces on each tooth and helping to maintain tool life under moderate depths of cut. The round insert form offers reliable engagement in interrupted cuts and contours where robust edge support is required. In practical terms this means a balance between economical material removal and preserved edge integrity, particularly when the coated carbide substrate is matched to the correct workpiece family as specified in the product matrix. Practical workshop integration and handling benefits The insert is supplied in a compact geometry with a 10 mm diameter and a thickness code of 03, allowing simple mounting and repeatable positioning in standard toolholders designed for round inserts. The tolerance class H ensures consistent fit and concentricity, so toolsetting routines remain steady and reproducible. Material suitability should be verified against the manufacturer’s matrix; the entry coated carbide grade is intended for a broad range of applications, but cutting data must be adapted to the specific workpiece material and machine capability. For tailored recommendations on Walter Tools inserts such as the RDHX1003M0-A57 WHH15X and to discuss achievable cutting parameters or availability, contact Metav Werkzeuge for a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 — specialists are available to advise on the optimal machining approach Technical Data Article number: RDHX1003M0-A57-WHH15X-WALTER SKU: RDHX1003M0-A57-WHH15X-WALTER Designation: RDHX1003M0-A57 WHH15X Product type: Fräswendeschneidplatte Brand: Walter Tools Facts Rake angle: 15° Shape: Round Size: 10 Thickness code: 03 Chipbreaker: A57 Tolerance class: H Special features Coated carbide grade WHH15X Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig Recommendation: Werkstoffeignung anhand der konkreten Produktmatrix prüfen FAQ What materials is this insert suitable for? Material suitability should be checked in the manufacturer’s product matrix; the WHH15X is a coated carbide grade intended for a broad range of applications but requires verification for specific materials. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes short, controlled chips and improves evacuation, which reduces the likelihood of chip entanglement and supports continuous milling processes. What does the 15° rake mean for cutting forces? A 15° rake produces a positive cutting engagement that typically lowers instantaneous cutting forces and helps to extend edge life under comparable cutting conditions. Is this insert compatible with standard round-insert toolholders? The round insert shape and tolerance class H are suitable for holders designed for this geometry; correct mounting and clamping ensure repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is part of the Sandvik group and is a recognised manufacturer of precision tools for metalworking. Protected trademarks and product names belong to their respective owners and are used here for explanation only. There is no affiliation implied between our company and the named brands; the offered article is an original, factory-new product of the manufacturer.
RDHX1003M0T-A27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, a WPP35G carbide grade tuned for Stahl machining, and a compact round form for consistent production results; order the insert directly via Metav Werkzeuge or consult the Metav team for application support. RDHX1003M0T-A27 WPP35G milling insert – Tiger·tec Gold, 15° relief (Walter Tools) The RDHX1003M0T-A27 WPP35G is a round milling insert designed for versatile Stahl machining, combining a Tiger·tec Gold coating with a 15° clearance angle for stable, productive cutting. Tiger·tec Gold coated carbide grade WPP35G Optimised for Stahl machining (ISO P) 15° clearance angle for stable cutting Round form, size 10 for versatile milling Longer tool life and predictable productivity The Tiger·tec Gold technology and the WPP35G grade deliver a wear-resistant, coated carbide solution that reduces flank and crater wear during continuous and interrupted cuts. This combination results in fewer tool changes and more predictable tool life, which directly improves process economy in batch and serial production. The coating enhances thermal stability and abrasion resistance, so cutting edge integrity is maintained even under the heat and chip loads typical for Stahl machining. For production environments seeking reliable cycle times, this insert offers a measurable benefit in uptime and overall machining efficiency. Stable cutting behaviour for Stahl applications Designed specifically for ISO P materials, the insert’s 15° clearance promotes secure chip evacuation and reduces rubbing at the flank, contributing to a consistent surface finish and lower cutting forces. The round plate geometry provides multiple effective cutting positions and allows for gentler engagement at varying depths of cut, which is advantageous when roughing and semi-finishing in the same setup. The integrated chipbreaker A27 supports controlled chip formation for common Stahl grades, reducing the risk of built-up edge and improving repeatability in dimensional results. Dimensions, compatibility and practical use The insert is supplied in the RDHX1003M0T-A27 designation with a plate size of 10 and plate thickness 03, manufactured to tolerance class H for consistent seating and repeatable positioning in standard milling holders. The A27 chipbreaker and the Tiger·tec Gold surface treatment make the insert suited to a broad range of unalloyed and alloyed Stahl. For parameter selection, start from conservative feeds and speeds recommended for coated carbide in ISO P work, then fine-tune for component quality and tool life. The RDHX1003M0T-A27 WPP35G is effective in applications that value process stability and predictable performance across mixed batch runs. Contact Metav Werkzeuge for tailored cut‑data and to order Walter Tools Tiger·tec Gold inserts; Metav Werkzeuge can advise on holder compatibility and application optimisation — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: RDHX1003M0T-A27-WPP35G-WALTER Label: Fräswendeschneidplatte RDHX1003M0T-A27 WPP35G Walter Tools Product type: milling insert Manufacturer: Walter Tools Core Technical Data Relief angle: 15° Insert form: Round Plate size: 10 Plate thickness: 03 Tolerance class: H Special features Grade: WPP35G Series: Tiger·tec Gold Chipbreaker: A27 Material application: Stahl Execution: X FAQ Is this insert suitable for general Stahl machining? Yes. The insert’s WPP35G grade and Tiger·tec Gold series are optimised for ISO P materials, making it suitable for a wide range of Stahl operations. What is the relief angle and why does it matter? The relief angle is 15°, which supports stable cutting and reduces rubbing on the flank, improving surface finish and tool life for Stahl machining. What geometry and size does the insert have? The insert is a round form with size 10 and plate thickness 03, supplied in the RDHX1003M0T-A27 designation for versatile milling applications. How does the A27 chipbreaker affect chip control? The A27 chipbreaker promotes controlled chip formation for common Stahl grades, which helps maintain consistent machining performance and reduces risk of built-up edge. Can this insert be used for finishing as well as roughing? Yes. The combination of Tiger·tec Gold coating and the round geometry allows the insert to perform across roughing and semi-finishing tasks when cutting data are adjusted accordingly. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDHX12T3M0-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide wear resistance, precise A57 chip control and a compact round 12 mm form for a dependable milling routine; order directly via Metav Werkzeuge or consult the specialists for application support. RDHX12T3M0-A57 WHH15X milling insert, round 12 mm by Walter Tools — 15° relief The RDHX12T3M0-A57 WHH15X is a round milling indexable insert designed for versatile milling tasks where a 15° relief and an A57 chipbreaker ensure controlled chip formation and stable cutting conditions. Coated carbide for consistent wear resistance 15° relief angle for stable cutting action Round 12 mm form for flexible milling applications A57 chipbreaker for reliable chip control Improved process stability through material and geometry The insert combines a coated carbide grade with a compact geometry that supports continuous machining cycles. The specific coating and the WHH15X grade contribute to improved wear behaviour, which translates into longer intervals between tool changes and predictable tool life. In production terms, this means fewer interruptions and steadier throughput on CNC milling centres. The round form and moderate relief angle reduce cutting forces during engagement, which helps maintain machine tool stability and lowers the risk of chatter in many common milling operations. Consistent chip control and surface outcome Thanks to the A57 chipbreaker and the 15° relief, chip evacuation is improved and surface integrity is preserved. Controlled chip formation reduces the likelihood of built-up edge and minimises rework, while the insert geometry supports a smoother finish with reduced tool marks. For operators handling mixed batches or medium-duty finishing passes, this behaviour helps achieve consistent component quality and predictable downstream processes. The chipbreaker design is particularly beneficial when machining materials that produce long, stringy chips under less favourable cutting conditions. Practical fitment, tolerance and handling benefits The insert is produced to tolerance class H and a standard round form, which simplifies replacement and indexing in compatible toolholders. The T3 thickness and 12 mm diameter offer a balance between stiffness and accessibility in tight or pocketed features. As the material selection is catalogue-dependent, it is advisable to confirm the exact substrate and coating variant when planning for specific workpiece materials. The overall configuration supports straightforward inventory management and rapid changeovers on multi-insert milling heads. Targeted efficiency for production environments Engineers and production planners will appreciate the combination of WHH15X grade characteristics and the insert’s geometry for achieving repeatable results across batch runs. The insert is aimed at shops seeking a reliable mid-range solution that emphasises process security and manageable tool costs. When matched with suitable cutting data and coolant strategy, the insert can contribute to lower overall machining costs per part while preserving surface quality and dimensional integrity. Contact Metav Werkzeuge today for tailored application advice and to secure RDHX12T3M0-A57 WHH15X inserts from Walter Tools for immediate process optimisation Technical Data Article number: RDHX12T3M0-A57-WHH15X-WALTER Designation: RDHX12T3M0-A57 WHH15X Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Insert diameter: 12 mm Thickness: T3 Relief angle: 15° Tolerance class: H Form: round Special features Grade: WHH15X Chipbreaker: A57 Coating / substrate: coated cemented carbide (catalogue-dependent) Product family: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suitable for? The insert in the WHH15X grade is a coated cemented carbide type; material suitability should be checked against the product matrix, and the insert is intended for a range of general milling applications. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes controlled chip formation and improved evacuation, which helps reduce rework and supports consistent surface quality when using the RDHX12T3M0-A57 WHH15X insert. Is the insert compatible with standard round insert toolholders? The round 12 mm form and T3 thickness match common round-insert milling holders; ensure the holder and clamping method accept this specific designation before fitting. What does tolerance class H imply for assembly? Tolerance class H indicates a defined manufacturing tolerance that facilitates predictable seating and repeatable indexing in suitable toolholders for stable machining performance. Can the WHH15X grade be used for high-speed machining? WHH15X is a coated carbide grade designed for broad use; confirm the specific coated variant and cutting data in the catalogue to determine suitability for high-speed machining regimes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDHX12T3M0T-A27 WKP25S WKP25S Wendeplatten - Walter Tools
Reliable, high-performance cutting for demanding milling tasks thanks to the Tiger‑tec Silver WKP25S grade and the A27 chipbreaker; the 15° relief angle and T3 thickness deliver stable cutting and predictable tool life. Order directly via Metav Werkzeuge for fast delivery or request application advice from our consultants. RDHX12T3M0T-A27 WKP25S milling insert — round 12 mm, A27 chipbreaker — Walter Tools The RDHX12T3M0T-A27 WKP25S is a round milling indexable insert optimised for productive machining of steel and cast iron in high-demand production environments. Tiger‑tec Silver coated grade WKP25S Designed for steel and cast iron 15° relief angle for stable cutting Round 12 mm insert with A27 chipbreaker Higher productivity in steel and cast-iron milling The Tiger‑tec Silver coating combined with the WKP25S grade enables higher cutting speeds and improved wear resistance when machining steel and cast iron. The A27 chipbreaker is designed to produce short, controllable chips in typical interrupted or continuous milling operations, reducing the risk of chip entanglement and improving surface finish. By converting these coating and geometry advantages into consistent metal removal rates, the insert supports shorter cycle times and fewer tool changes, which directly benefits throughput for batch and serial production. Consistent edge life and fewer process interruptions A 15° relief angle and T3 thickness result in a compact but robust cutting edge that tolerates the elevated temperatures and abrasive wear common when machining ferrous materials. The combination of geometry and coating yields repeatable performance and predictable tool-life windows, enabling reliable scheduling of tool changes and reducing unexpected downtime. For operations that prioritise process stability, this insert translates technical properties into measurable savings through reduced rework and more stable part quality. Simple integration and versatile application The round 12 mm form factor provides compatibility with a wide range of standard milling holders and cutters; indexing the insert allows rapid restoration of a fresh cutting edge without full tool replacement. As an indexable insert, it offers economical management of cutting-edge consumption: when one edge wears, the insert is indexed or replaced while the toolbody remains in service. This reduces tooling cost per part and simplifies inventory logistics for workshops running mixed-series production on steel and cast-iron components. Contact Metav Werkzeuge for tailored tooling recommendations and ordering assistance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific setups and delivery options Technical data SKU: RDHX12T3M0T-A27-WKP25S-WALTER Label: Fräswendeschneidplatte RDHX12T3M0T-A27 WKP25S Walter Tools Manufacturer: Walter Tools Core specifications Insert size: 12 mm Thickness: T3 Relief angle: 15° Tolerance class: H Shape: Round Chipbreaker: A27 Materials & special features Series / coating: Tiger‑tec Silver Grade: WKP25S Suitable for: Steel (P), Cast iron (K) Execution: X Plate designation: RDHX12T3M0T-A27 FAQ What materials is this insert suited for? This RDHX12T3M0T-A27 WKP25S insert from Walter Tools is intended primarily for steel (P) and cast iron (K) applications, offering optimised performance for those material groups. How does the A27 chipbreaker improve machining? The A27 chipbreaker on this insert promotes short, manageable chips in milling operations, which improves chip evacuation and surface quality while lowering the risk of chip-related interruptions. Can the insert be indexed to restore cutting edges? Yes, as an indexable milling insert the RDHX12T3M0T-A27 design allows rotation or replacement of the insert to present a fresh cutting edge without changing the toolbody, supporting economical tooling management. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, allowing higher cutting parameters and more consistent tool life when machining abrasive ferrous materials. Is this insert suitable for high-volume production? The combination of robust geometry, predictable wear characteristics and the ability to index makes this insert suitable for high-volume and serial production where process reliability and reduced downtime are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
RDHX12T3M0T-A27 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WKP35G grade for reliable machining of steel and cast iron; the round 12 mm insert with 15° relief and A27 chipbreaker supports stable chip control and predictable tool life. Order the RDHX12T3M0T-A27 WKP35G milling insert directly via Metav Werkzeuge or consult our specialists for application advice. RDHX12T3M0T-A27 WKP35G milling insert — Tiger‑tec Gold, for Steel & Cast Iron — Walter Tools A RDHX12T3M0T-A27 WKP35G milling insert engineered for high-productivity finishing and roughing operations on steel and cast iron with a coated carbide grade from the Tiger‑tec Gold series. Tiger‑tec Gold coated for long tool life Suitable for Steel and Cast Iron machining Round insert, 12 mm diameter, 15° relief Stable chip control with A27 chipbreaker Boosted productivity through advanced coating technology The combination of the Tiger‑tec Gold coating and the WKP35G carbide grade delivers enhanced wear resistance and consistent cutting-edge performance. Because the coating is optimised for the thermal and abrasive demands of turning and milling, the insert maintains its cutting geometry longer, which reduces downtime for index changes and increases overall throughput. This results in a measurable cost-benefit when used in repetitive production runs on steel and cast iron. Consistent chip behaviour and process stability The A27 chipbreaker geometry provides controlled shear and fragmenting of chips, improving evacuation in interrupted cuts and helping to avoid re-cutting of swarf. The round shape combined with a 15° relief angle supports secure seating and smooth entry into the workpiece, reducing vibration and promoting a reliable surface finish. For production environments where repeatability matters, these design choices contribute directly to lower scrap rates and stable cycle times. Versatile application range for common engineering materials Designed for the ISO groups P and K, this insert is suitable for a wide selection of unalloyed and alloyed steels as well as grey and nodular cast irons. The geometry and grade selection make the insert adaptable to both finishing and medium-depth material removal, enabling flexible tool set-ups and fewer tool types in the tool cabinet. Clear material-group alignment simplifies process planning for engineers and shopfloor technicians. Practical handling and integration into tooling systems The RDHX12T3M0T-A27 design, with its 12 mm nominal size and T3 thickness, fits standard round-holder configurations and allows quick interchange without modifying existing toolholders. The tolerance class H ensures consistent fit and repeatable positioning after indexation, which helps maintain workpiece tolerances across multiple tool changes. Walter Tools’ series documentation gives recommendations for feeds and speeds to match machining strategy and machine capability. Contact Metav Werkzeuge for tailored application guidance on Walter Tools’ Tiger‑tec Gold WKP35G insert and assistance integrating the RDHX12T3M0T-A27 into existing machining processes Technical Data Article number (SKU): RDHX12T3M0T-A27-WKP35G-WALTER Product: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Grade: WKP35G Series: Tiger‑tec Gold Dimensions & Core Data Insert size: 12 mm Relief angle: 15° Thickness: T3 Tolerance class: H Materials & Special Features Coating: Tiger‑tec Gold Chipbreaker: A27 Shape: Round Suitable for: Steel (P), Cast iron (K) Execution: X ISO designation: RDHX12T3M0T-A27 WKP35G FAQ What materials is this insert best suited for? The RDHX12T3M0T-A27 WKP35G insert is optimised for steel (ISO group P) and cast iron (ISO group K), as indicated by the WKP35G grade and the Tiger‑tec Gold coating. How does the A27 chipbreaker affect machining? The A27 chipbreaker provides controlled chip formation for both interrupted and continuous cuts, improving evacuation and reducing the risk of recutting, which supports consistent surface quality. Is the insert compatible with standard round toolholders? Yes; the 12 mm round geometry and T3 thickness are designed to integrate with common round-holder systems and allow straightforward indexation. Does the Tiger‑tec Gold coating reduce tool changes? The Tiger‑tec Gold coating enhances wear resistance and edge stability, which typically extends tool life and reduces the frequency of index changes under comparable operating conditions. What tolerance and repeatability can be expected? The insert is supplied in tolerance class H, offering precise fit and repeatable seating to help maintain dimensional consistency after indexation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
RDHX1604M0-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of predictable cutting performance, controlled chip formation and simple tool identification to keep milling processes productive and repeatable; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. RDHX1604M0-A57 WHH15X – Milling indexable insert, round geometry, 15° relief (Walter Tools) RDHX1604M0-A57 WHH15X is a round milling insert designed for variable engagement and reliable chip control in milling operations Round geometry for stable cutting 15° relief angle for versatile engagement A57 chipbreaker for controlled chips Coated carbide grade WHH15X for durability Increased process stability through geometry and relief The combination of round geometry and a 15° relief produces a stable cutting engagement that reduces vibration and evens out load peaks during interrupted cuts. As a result, the insert ensures consistent performance across successive passes and contributes to improved surface quality on the workpiece. The integrated A57 chipbreaker optimises chip flow for typical milling applications, helping to avoid re-cutting of chips and minimising the need for secondary chip handling. For varied part programmes, this geometry supports predictable cycle times and steady tool life. Predictable economy from durable grade and chip control A focus on machining economy is achieved through the WHH15X coated carbide grade and the controlled chipbreaking geometry. The coating and substrate combination supports wear resistance under standard milling conditions and helps to maintain an even flank condition over consecutive parts. This reduces the frequency of insert changes and machine downtime, improving overall shop-floor efficiency. Where process reliability and repeatable results matter, the insert contributes to a lower cost per part through extended effective cutting intervals and stable performance. Simple identification and application guidance for quick integration Identification of the insert is straightforward thanks to the ISO-style designation and series marking; the tolerance class H and the series description indicate suitability checks should be carried out against the specific product matrix. The design code and chipbreaker make it compatible with common round-insert milling toolholders that accept the RDHX form. For optimal results, verify seat geometry and clamping arrangement on the cutter body and consult the product matrix for recommended cutting data; the RDHX1604M0-A57 WHH15X designation simplifies matching inserts to suitable tool systems. For high productivity with Walter Tools' WHH15X inserts, contact Metav Werkzeuge for application advice or to request current availability: info@metav-werkzeuge.com – Tel +49 2822 7131930 Technical Data Article number: RDHX1604M0-A57-WHH15X-WALTER Core specifications Size code: 16 Thickness code: 04 Relief angle: 15° Chipbreaker: A57 Tolerance class: H Execution: X Materials and features Carbide grade: WHH15X (coated carbide) Geometry: round Series: Walter Schneidstoffsorte - Serie offen Designation: RDHX1604M0-A57 Product type: Milling indexable insert FAQ What materials is the insert suited for? Material suitability should be verified against the official product matrix; the WHH15X grade is a coated carbide formulation intended to provide broad applicability in milling applications. What is the relief angle and why does it matter? The insert uses a 15° relief, which moderates cutting engagement and supports versatile approach angles while helping to reduce cutting forces and vibration. Which chipbreaker does the insert feature? This insert is supplied with an A57 chipbreaker, designed to control chip formation and facilitate stable evacuation during milling. How are size and thickness identified? Size and thickness are given by the code markings: 16 for the size code and 04 for the thickness code; these identifiers match the RDHX format used in tooling documentation. How to ensure compatibility with a cutter body? Match the RDHX form and the chipbreaker/relief characteristics to the toolholder’s seat and clamping type; consult the product matrix for recommended seat geometries and cutting parameters. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; The Walter AG (brand presentation: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the mentioned brands beyond the sale of original, factory-new articles.
RDHX1604M0T-A27 WKP25S WKP25S Wendeplatten - Walter Tools
Combine high process reliability and broad material versatility with the Tiger·tec Silver WKP25S grade and a 15° clearance angle for consistent milling performance; order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. RDHX1604M0T-A27 WKP25S milling indexable insert — Tiger·tec Silver, for steel and cast iron (Walter Tools) RDHX1604M0T-A27 WKP25S is a round milling insert engineered for productive face and peripheral milling of steel and cast iron, offering a stable cutting edge and optimised chip formation. Tiger·tec Silver coated carbide grade WKP25S Optimised A27 chipbreaker for stable chip control 15° clearance angle for reliable cutting geometry Round 16 mm form for versatile milling applications Increase throughput with proven grade technology The Tiger·tec Silver WKP25S grade combines a wear-resistant coating with a robust substrate to deliver consistent tool life and dependable performance during extended runs. This creates a measurable improvement in process stability and reduces the risk of unexpected tool changes, which in turn supports higher machine utilisation and predictable production planning. The coated carbide construction ensures thermal and abrasive resistance suited to the heat generation typical of machining steels, while still maintaining edge integrity for repeatable results. Precise chip control and surface quality The A27 chipbreaker is designed to produce short, controllable chips when working with both steel and cast iron, lowering the likelihood of chip entanglement and enhancing surface finish. With the insert’s 15° clearance angle, cutting forces are guided to preserve the cutting edge geometry, improving dimensional consistency. These characteristics translate into fewer rework operations and a higher first-pass yield for components where surface quality and tolerance adherence are critical. Versatile geometry for various milling strategies The circular form and 16 mm diameter offer flexibility across a range of milling strategies, from light finishing passes to more aggressive material removal when programmed accordingly. The insert’s geometry supports stable engagement in pocketing and shoulder milling operations, enabling process engineers to balance cutting parameters for optimal productivity. Use of this geometry can simplify tool management by reducing the variety of insert types required for mixed production environments. Clear material scope and practical application benefits Engineered for machining in the ISO P (steel) and K (cast iron) groups, the insert is a practical choice where mixed-material production demands consistent performance. The coated carbide technology reduces abrasive wear on cast iron and controls deformation when cutting unalloyed or alloyed steels. For workshop planners and production managers, this means improved repeatability across batches and simpler inventory logistics when a single grade can cover multiple workpiece families. For reliable performance with Walter Tools’ Tiger·tec Silver WKP25S inserts, contact Metav Werkzeuge for application-specific recommendations and order placement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RDHX1604M0T-A27-WKP25S-WALTER Product: Milling indexable insert RDHX1604M0T-A27 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Shape: Round Size: 16 mm Clearance angle: 15° Thickness: 04 Chipbreaker: A27 Grade: WKP25S Material suitability: P (steel), K (cast iron) Tolerance class: H Special features Coating: Tiger·tec Silver (coated carbide) Application: Productive milling of steel and cast iron Execution: X FAQ Which materials can this insert machine effectively? The RDHX1604M0T-A27 WKP25S insert from Walter Tools is suitable for ISO P (steel) and ISO K (cast iron) applications, offering wear resistance for common steel grades and abrasion resistance for cast materials. What benefits does the WKP25S grade provide in daily production? WKP25S, part of the Tiger·tec Silver family, delivers improved tool life and stable cutting-edge behaviour, which helps maintain consistent cycle times and reduces unexpected tool changes during longer runs. How does the A27 chipbreaker influence machining? The A27 chipbreaker produces short, controlled chips that improve chip evacuation and surface finish, reducing downtime due to chip management and lowering the risk of workpiece damage. What are the key geometric features to consider when programming cuts? The insert’s round 16 mm form and 15° clearance angle favour versatile engagement angles and steady cutting forces, enabling reliable peripheral and face milling strategies with predictable dimensional results. Is this insert suitable for finish as well as roughing passes? Yes; the combination of coated carbide grade and chipbreaker design allows the insert to be used for both finishing and moderate roughing, depending on the selected cutting parameters and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDHX2006M0T-A27 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, reliable A27 chip control, and suitability for both steel and cast iron to keep milling operations productive and predictable; order the RDHX2006M0T-A27 WKP35S directly via Metav Werkzeuge or ask our consultants if needed. RDHX2006M0T-A27 WKP35S — Indexable milling insert, Tiger·tec Silver, Walter Tools The RDHX2006M0T-A27 WKP35S is a round indexable milling insert designed for efficient machining of steel and cast iron in industrial milling applications. Tiger·tec Silver coating for long tool life Suitable for steel and cast iron machining Round 20 mm insert with 15° relief angle A27 chipbreaker for reliable chip control Consistent productivity through advanced substrate and coating The combination of a coated carbide substrate and the Tiger·tec Silver technology provides a stable cutting edge and extended wear resistance. This insert supports continuous production processes by reducing tool changes and downtime: the coating lowers flank wear and improves heat resistance, while the substrate retains edge stability under the thermal and mechanical loads typical of steel and cast iron machining. The result is an economical solution for high-volume milling where predictable tool life is essential. Precise chip control and surface quality from optimised geometry With an integrated A27 chipbreaker and a 15° relief angle, the geometry of the insert promotes controlled chip formation and evacuation, which helps maintain consistent surface finish and reduces the risk of built-up edge. The round 20 mm form factor ensures multi-edge indexing and even wear distribution across cutting edges, supporting repeatable results in slotting and peripheral milling routines. For operations sensitive to chip behaviour, this insert reduces manual intervention and improves process stability. Versatile application spectrum and straightforward integration The WKP35S grade is tailored for the ISO P and K groups, making the insert suitable for a broad range of steels and cast irons. Its compatibility with common milling cutters allows straightforward retrofitting in existing tool holders without complex parameter changes. Material-specific adjustments—such as feed and speed tuning—are recommended to exploit the grade’s strengths: higher cutting speeds for alloyed steels and moderated feeds for abrasive cast-iron grades. For further process parameters and compatibility checks, contact Metav Werkzeuge for detailed guidance at info@metav-werkzeuge.com or +49 2822 7131930. For specific ordering, grading advice or technical data on the Walter Tools RDHX2006M0T-A27 WKP35S indexable milling insert, contact Metav Werkzeuge by e‑mail or phone for direct consultation and reliable order processing. Technical data SKU: RDHX2006M0T-A27-WKP35S-WALTER ISO designation: RDHX2006M0T-A27 WKP35S Product type: Indexable milling insert / Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Insert diameter: 20 mm Insert thickness: 6 mm Relief angle: 15° Tolerance class: H Shape: Round Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: A27 Material suitability: Steel (P), Cast iron (K) Execution: X FAQ What materials is this insert suitable for? The RDHX2006M0T-A27 WKP35S is designed for ISO P and K materials, making it suitable for machining steel and cast iron. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the WKP35S grade increases wear resistance and thermal stability, which extends tool life and supports consistent productivity in milling operations. What chip behaviour can be expected with the A27 chipbreaker? The A27 chipbreaker promotes controlled chip formation and efficient evacuation, reducing recutting and improving surface finish when using the RDHX2006M0T-A27 WKP35S insert. Is the round 20 mm form suitable for multi-edge indexing? Yes; the round 20 mm geometry allows multiple usable edges and even wear distribution, which helps reduce tool change frequency and overall tooling costs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer Walter Tools.
RDHX2006M0T-A27 WPP35G WPP35G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated carbide grade and a purpose‑matched A27 chipbreaker ensures efficient machining of steel with consistent chip control and reliable tool life; the round 20 mm format and 15° relief make this insert a versatile choice for a wide range of milling operations. Order the RDHX2006M0T‑A27 WPP35G directly via Metav Werkzeuge or ask the consultants if needed. RDHX2006M0T‑A27 WPP35G indexable milling insert by Walter Tools — Tiger‑tec Gold, 15° relief The RDHX2006M0T‑A27 WPP35G is a round indexable milling insert designed for machining steel, combining Tiger‑tec Gold coated carbide with an A27 chipbreaker and a 15° relief angle for predictable performance in general milling applications. Tiger‑tec Gold coated carbide grade WPP35G Suitable for steel according to ISO P Round 20 mm insert with 15° relief A27 chipbreaker for controlled chip formation Faster, more predictable metal removal through reliable chip control The coated carbide grade WPP35G from the Tiger‑tec Gold family is developed to balance wear resistance and toughness for typical steel machining demands. With the integrated A27 chipbreaker, the insert stabilises chip formation, which reduces interruptions from long, stringy chips and supports uninterrupted feed rates. This results in a more efficient machining cycle and reduced risk of rework. The 15° relief angle contributes to a stable cutting geometry, lowering cutting forces and improving surface interaction during each pass. Robust performance for common steel applications with extended tool life Engineered for ISO group P materials, the insert’s coated carbide construction provides a wear-resistant layer while retaining a tough substrate beneath. This combination helps to withstand the heat and abrasion encountered when machining unalloyed and alloyed steels. The result is consistent flank wear behaviour and fewer unexpected tool changes, which supports improved process reliability and predictable production planning for batch and single‑piece manufacturing alike. Practical geometry and handling that simplify workplace routines The round, 20 mm format and plate thickness (06) deliver a compact cutting edge with multiple effective cutting positions where applicable, supporting fast indexability and straightforward inventory management. The round design gives good edge strength and tolerance to interrupted cuts, while the H tolerance class ensures dimensional consistency for reliable seat and repeatability in multi‑insert cutters. Operators gain a simple, durable solution for general milling without the need for specialist fixturing. How to integrate the insert into production for best results When pairing this insert with appropriate cutter bodies and feeds, the RDHX2006M0T‑A27 WPP35G performs best under moderate to high feed rates consistent with steel machining practice. Selecting compatible cutter bodies that accept round inserts and ensuring correct seating and clamping will preserve the coated layer and cutting edge geometry. For unfamiliar processes, testing a single cutter set-up before large runs helps to establish optimal feeds and speeds while protecting component quality and tool life. Contact Metav Werkzeuge for availability, cutter compatibility advice and application guidance on the RDHX2006M0T‑A27 WPP35G indexable milling insert by Walter Tools Technical Data Article number: RDHX2006M0T-A27-WPP35G-WALTER Article name: Fräswendeschneidplatte RDHX2006M0T-A27 WPP35G Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger‑tec Gold Grade: WPP35G Facts Insert size: 20 Plate thickness: 06 Relief angle: 15° Tolerance class: H Special features Chipbreaker: A27 Coating: Tiger‑tec Gold (coated carbide) Shape: Round Material application: Steel (ISO P) Execution: X FAQ What materials is this insert designed for? The RDHX2006M0T‑A27 WPP35G from Walter Tools is specified for ISO group P materials and is intended primarily for steel machining. Which chip control behaviour can be expected with the A27 chipbreaker? The A27 chipbreaker on the WPP35G grade promotes short, controllable chips when machining steel, improving process stability and reducing downtime for chip management. Is the insert suitable for interrupted cuts? Yes, the round insert geometry combined with the Tiger‑tec Gold coated carbide delivers edge strength and toughness that tolerate interrupted cutting conditions typical in milling. How should the insert be seated in the cutter body? Ensure the seat is clean and undamaged, use the correct clamping torque specified by the cutter body manufacturer, and verify the insert sits flush to benefit from the H tolerance and repeatable positioning. Does the WPP35G grade favour wear resistance or toughness? WPP35G is formulated to balance wear resistance and toughness for steel machining; the coating increases wear resistance while the substrate maintains toughness under typical steel cutting stresses. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT0803M0-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, optimised D57 chip control and the RDMT0803 geometry for consistent, productive milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. RDMT0803M0-D57 WKP35S milling insert by Walter Tools — Tiger·tec Silver coating, for steel and cast iron The RDMT0803M0-D57 WKP35S is a round indexable milling insert designed for efficient machining of steel and cast iron, offering stable cutting behaviour and reliable chip formation. Tiger·tec Silver coating for long tool life Optimised chipformer D57 for reliable chip control RDMT0803 geometry, 15° clearance angle Suited for steel (P) and cast iron (K) machining Consistent cutting performance for uninterrupted production The RDMT0803 geometry combined with the WKP35S grade from the Tiger·tec Silver family ensures a balanced mix of toughness and hardness that supports steady metal removal. The coated carbide substrate reduces flank wear under cyclic loads, which leads to fewer interruptions for tool changes and a more predictable production rhythm. This regularity in performance supports planned cycle times and reduces the risk of unexpected downtime, a decisive advantage in mixed-volume manufacturing. Coating and grade that extend tool life and surface quality The Tiger·tec Silver coating technology provides thermal stability and improved oxidation resistance at elevated cutting temperatures, which translates directly into edge stability and repeatable surface finish. The WKP35S grade is formulated for the thermal and mechanical demands of machining steel and cast iron, so component tolerances are maintained for longer between regrinds. The result is reduced tooling consumption and more consistent part quality across batches. Geometry and chip control that reduce rework and machine stress An optimised chipformer D57 and a 15° clearance angle promote controlled chip breaking and efficient evacuation from the cutting zone. Effective chip control prevents chip re-cutting and lowers the risk of built-up edge or surface damage, thereby improving machining reliability. The insert’s round shape provides smooth engagement in interrupted cuts and supports higher feed rates where process stability is required, boosting material removal without compromising tool life. Material scope and application efficiency in daily work Designed for the ISO P and K groups, this insert is suitable for common tasks in steel and cast iron milling, from roughing to semi-finishing operations. Its combination of geometry and grade is particularly useful where practitioners need a single, robust insert to cover several workpiece types, reducing tool inventory complexity. For detailed parameters and process windows, Metav Werkzeuge can supply cutting data and application charts to match specific machines and setups. For tailored advice on the Walter Tools RDMT0803M0-D57 WKP35S and to verify suitability for specific production tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RDMT0803M0-D57-WKP35S-WALTER Description: Fräswendeschneidplatte RDMT0803M0-D57 WKP35S Walter Tools Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Core specifications Clearance angle: 15° Insert size: 08 Insert thickness: 03 Chipformer: D57 Tolerance class: M Shape: Round Version: T Materials & applications Coating: Tiger·tec Silver Material class: P / K Suitable for: steel Suitable for: cast iron ISO designation: RDMT0803M0-D57 WKP35S FAQ What materials is this insert intended for? The RDMT0803M0-D57 WKP35S is designed for ISO groups P and K and is suitable for machining steel and cast iron with optimised chip control. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade improves thermal resistance and wear behaviour, which helps maintain tool life and consistent surface finish over longer runs. What is the function of the D57 chipformer? The D57 chipformer is engineered to break and evacuate chips reliably, reducing recutting and improving process stability in both continuous and interrupted milling. Is the insert geometry suitable for interrupted cuts? Yes, the round RDMT0803 geometry with a 15° relief angle provides robustness in interrupted cuts and supports stable engagement and feed rates. Can this insert be used for both roughing and semi-finishing? The WKP35S grade and the insert geometry are suitable for a range of operations from roughing to semi-finishing, offering flexibility for mixed production requirements. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT0803M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
High wear resistance from the Tiger‑tec Gold coating and precise chip control from the D57 breaker lower tool changes and improve process stability; choose the RDMT0803M0‑D57 WPP35G for productive steel machining. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. RDMT0803M0‑D57 WPP35G Fräswendeschneidplatte — Tiger‑tec Gold coating, for Steel (Walter Tools) The RDMT0803M0‑D57 WPP35G is a round milling indexable insert designed for steel machining, combining a Tiger‑tec Gold coated carbide substrate with a D57 chipbreaker for controlled chip formation and consistent cutting performance Tiger‑tec Gold coating for long tool life Optimised D57 chipbreaker for steel Round 08 insert with 15° relief angle Coated carbide grade WPP35G for universal use Longer productive cycles through advanced coating and grade The combination of Tiger‑tec Gold coating and the WPP35G carbide grade increases wear resistance and maintains a stable cutting edge during extended operations. As a coated carbide insert, it resists abrasive wear and thermal loading typical of steel machining, which reduces the frequency of index changes and machine downtime. For production environments this means fewer interruptions and more predictable tool life, supporting reliable batch processing and steady output. Controlled chips and improved surface quality for steel Equipped with the D57 chipbreaker and classified for ISO P (steel) applications, the insert shapes chips to prevent entanglement and to direct material away from the cutting zone. Improved chip control minimises recutting and contributes to a better surface finish on the workpiece. The geometry is optimised for the heat and deformation characteristics of unalloyed and alloyed steels, enabling stable cutting conditions and consistent part quality across successive workpieces. Precision geometry for consistent setup and repeatability The round‑form 08 insert with a 15° relief angle and tolerance class M ensures reliable seating in standard milling heads and repeatable positioning during index changes. The modest thickness and well‑defined geometry favour predictable force distribution and ease of clamping, supporting dimensional accuracy and process security. Integration into existing tool systems is straightforward, while the coated surface supports a balance between toughness and wear resistance for versatile machining tasks. Contact Metav Werkzeuge for tailored application advice and fast supply of RDMT0803M0‑D57 WPP35G inserts from Walter Tools: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: RDMT0803M0-D57-WPP35G-WALTER Designation: RDMT0803M0-D57 WPP35G Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 08 Plate thickness: 03 Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger‑tec Gold Grade: WPP35G Material class: Coated carbide Applicable material: Steel (ISO P) Shape: Round Execution: T FAQ Which materials are best machined with this insert? The RDMT0803M0‑D57 WPP35G from Walter Tools is intended for steel workpieces and is optimised for the heat and chip characteristics typical of ISO P materials. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, extending the insert’s useful life under continuous cutting conditions. How does the D57 chipbreaker affect machining? The D57 chipbreaker controls chip formation to reduce entanglement and recutting, which enhances surface finish and promotes consistent process behaviour during steel milling. Is the insert suitable for heavy interrupted cuts? The coated carbide construction and the WPP35G grade provide a balance of toughness and wear resistance that supports demanding operations; assessment for specific interrupted cutting regimes is recommended. What does tolerance class M mean for repeatability? Tolerance class M indicates consistent manufacturing accuracy for the insert geometry, supporting repeatable seating and predictable part tolerances in serial production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer (Walter Tools).
RDMT0803M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of thermal stability from the Tiger‑tec Gold coating, the WSM35G grade for demanding materials, and the D57 chipbreaker for consistent chip control; order the RDMT0803M0‑D57 WSM35G insert directly via Metav Werkzeuge or consult our specialists for application advice RDMT0803M0‑D57 WSM35G — Fräswendeschneidplatte (round indexable milling insert) with Tiger‑tec Gold coating for rostfreier Stahl and superalloys A RDMT0803M0‑D57 WSM35G indexable milling insert designed for high thermal and edge stability when machining rostfreier Stahl and heat‑resistant alloys Tiger‑tec Gold coating for heat resistance Optimised D57 chipbreaker for stable chips Round insert RDMT0803 for flexible milling 15° clearance angle for secure cutting High process reliability for tough materials The coated carbide grade WSM35G, part of the Tiger‑tec Gold series, offers enhanced thermal resistance and a robust cutting edge that reduces the tendency for built‑up edge when machining rostfreier Stahl and similar alloys. Because the grade is developed specifically for the demands of Group M and S materials, the insert maintains a predictable wear behaviour at elevated temperatures. This leads to fewer tool changes, improved component repeatability and more stable cycle times on production lines, which supports overall process reliability. Predictable chip control and machining stability The dedicated D57 chipbreaker geometry promotes controlled chip formation, reducing the risk of long stringy chips and ensuring safe evacuation. Combined with the round insert form and the specified 15° clearance, this geometry enables consistent engagement and resilience under interrupted cutting conditions. The result is a measurable reduction in machine downtime related to chip issues and a lower scrap rate from component damage caused by erratic chip flow. Versatile application and ease of integration With a compact size code 08 and a plate thickness of 03, the insert integrates into common milling toolholders for finishing and semi‑finishing operations on demanding materials. Its classification for machining rostfreier Stahl and superalloys/titanium means the component is suitable for aerospace, energy and medical applications where heat resistance and edge stability are paramount. The round geometry also allows neutral cutting direction and flexible entry angles, simplifying toolpath planning and tool inventory. Economic performance and maintenance benefits By combining a wear‑resistant coating system with a geometry tuned for stable cutting, the insert supports longer tool life and predictable reconditioning intervals. This leads to lower tool consumption per part and reduced handling for regrinding or replacement. Operators benefit from straightforward grade identification and the ability to compare cutting intervals against previous tool sets, making cost‑per‑part calculations and productivity optimisations more reliable. Contact Metav Werkzeuge for specific machining recommendations for the RDMT0803M0‑D57 WSM35G insert and to arrange tailored delivery or technical consultation Technical data SKU: RDMT0803M0‑D57‑WSM35G‑WALTER Designation: RDMT0803M0‑D57 WSM35G Type: Fräswendeschneidplatte (indexable milling insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Core specifications Plate size: 08 Plate thickness: 03 Free/clearance angle: 15° Chipbreaker: D57 Plate form: Round Tolerance class: M Material group: S / M Special features Coating technology: Tiger‑tec Gold Suitable for rostfreier Stahl Applicable to superalloys and titanium Robust coating for thermal stability Optimised chip control for interrupted cuts FAQ What materials is this insert suited for? The RDMT0803M0‑D57 WSM35G insert is formulated for machining rostfreier Stahl and heat‑resistant superalloys, with the WSM35G grade providing thermal and edge stability. Is the insert coated and what benefit does the coating provide? Yes — the insert uses the Tiger‑tec Gold coating technology, which increases heat resistance and helps maintain a stable cutting edge during demanding operations. Which chipbreaker is fitted and why does it matter? The insert features the D57 chipbreaker, designed to produce short, controllable chips and improve evacuation, reducing the risk of chip‑related interruptions. Can this insert be used in interrupted milling or slotting? The round geometry and 15° clearance angle provide resilience in interrupted cuts; the combination reduces chipping risk and supports stable machining under variable engagement. How does the grade affect tool life compared with standard carbide? The WSM35G grade, tailored for tough materials, offers improved wear resistance at elevated temperatures, which typically extends tool life and results in fewer replacements compared with uncoated or general‑purpose grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT0803M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSP45G grade for reliable performance in demanding milling tasks; the 15° clearance angle and round D57 chipbreaker support stable cutting and predictable chip control. Order directly via Metav Werkzeuge or consult our technical advisors for selection and availability. RDMT0803M0-D57 WSP45G milling insert (Tiger·tec Gold) – Walter Tools, 15° clearance The RDMT0803M0-D57 WSP45G is a round, coated carbide milling insert designed for versatile milling of steel, stainless steel and heat‑resistant alloys; ideal for robust production milling where edge stability and consistent chip formation are required. Tiger·tec Gold PVD coating For steel, stainless steel and superalloys 15° clearance angle for stable cutting Round insert D57, size 08 Increase process stability with a proven coated grade The combination of the WSP45G grade and Tiger·tec Gold coating is engineered to provide consistent wear resistance and reliable cutting edge behaviour in milling operations. Designed for mixed production, the insert supports predictable chip formation and reduces the risk of edge build‑up when machining steel and stainless steel. The coating technology improves thermal resistance and adhesion, which extends tool life under typical milling heat loads. Predictable chip control and secure seating for repeatable results A round geometry with the D57 chipbreaker delivers controlled chip flow and reduces intermittent cutting loads, which benefits cycle‑time stability on shoulder and peripheral milling. The 15° clearance angle lowers rubbing and supports a clean cutting action, while the size 08 and thickness 03 provide a compact profile that suits many standard milling holders. These geometrical choices translate into fewer process interruptions and more reproducible surface finishes. Broad material range and application focus explained Marked for P / M / S in accordance with ISO groupings, the insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. In practical terms, this means the grade is optimised for the thermal and mechanical challenges associated with these groups: heat dissipation, tendency to form built‑up edge and material toughness. For shops running mixed batches, a single grade like this reduces tooling complexity. Practical considerations for workshop integration Tolerance class M indicates a medium accuracy level appropriate for stable, production‑orientated setups where repeatability is required rather than ultra‑precision alignment. The designation RDMT0803M0‑D57 describes the insert form and size for straightforward matching with compatible milling cutters. As a coated carbide insert from a reputable range, it supports efficient, economical machining when combined with suitable cutting parameters and holder rigidity. For tailored recommendations on cutter compatibility, batch planning or fast delivery of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team can advise on the optimal grade and geometry for specific applications. Technical Data Article number: RDMT0803M0-D57-WSP45G-WALTER Designation: RDMT0803M0-D57 WSP45G Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 08 Thickness: 03 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G Material suitability: P / M / S Shape: Round Chipbreaker: D57 Execution: T FAQ What materials is this insert suitable for? The RDMT0803M0‑D57 WSP45G insert is suitable for steel, stainless steel and heat‑resistant superalloys (P / M / S) as indicated by the grade and series. What does the Tiger·tec Gold series provide? Tiger·tec Gold is a PVD coating technology that enhances wear resistance and thermal stability; the WSP45G grade within this series aims for robust edge stability in milling. Which geometrical data define the insert? The insert is round with a D57 chipbreaker, a 15° clearance angle, size 08 and thickness 03, offering controlled chip flow and stable engagement in standard holders. What does tolerance class M mean for the user? Tolerance class M denotes medium dimensional accuracy suitable for production milling where repeatability and process stability are priorities. Is this an original product from the manufacturer? Yes, the item is offered as an original, factory‑new Walter Tools insert (RDMT0803M0‑D57 WSP45G). Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
RDMT10T3M0-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver wear resistance and the WKP25S grade for consistent tool life and productive machining of steel and cast iron. The combination of a D57 chipbreaker and a 15° clearance angle delivers stable chip control and repeatable surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. RDMT10T3M0-D57 WKP25S round milling insert — D57 chipbreaker, 15° clearance | Walter Tools The RDMT10T3M0-D57 WKP25S is a round milling indexable insert with Tiger·tec Silver coating, engineered for efficient roughing and general milling of steel and cast iron in industrial production environments. Tiger·tec Silver coating for long tool life Optimised D57 chipbreaker for reliable chips Suitable for steel (P) and cast iron (K) 15° clearance angle for secure cutting Increased productivity through proven coating technology The combination of the Tiger·tec Silver coating and the WKP25S grade provides a balance of wear resistance and toughness that supports longer operating cycles and fewer index changes. This coating system reduces abrasive and adhesive wear on the cutting edges, which translates to more consistent cutting conditions and improved productivity in repetitive milling operations. The result is predictable tool life and less downtime for regrinding or replacement, which benefits batch production and high-volume machining. Reliable chip control for consistent surface finish The D57 chipbreaker geometry and the round plate form offer controlled chip formation under varying cutting conditions. The dedicated breaker helps evacuate chips reliably, reducing the risk of re-cutting and surface damage. With a 15° clearance angle and a T3 plate thickness, the insert supports steady cutting forces and a secure edge engagement, improving dimensional stability and component surface quality in both continuous and interrupted cuts. Broad material capability with ISO-based designation Designed for classification groups P (steel) and K (cast iron) according to ISO 513, the insert adapts to the thermal and mechanical challenges of these material families. For steel, the grade is tuned to manage heat generation and chip formation; for cast iron, the structure and coating resist abrasive wear and handle the commonly brittle, breaking chips. This versatility reduces the need for multiple specialised grades across mixed-material production runs. Robust tolerance and practical mounting for workshop efficiency The M tolerance class ensures consistent plate dimensions for accurate seat fit and repeatable machining results. The round plate geometry simplifies indexing and maximises the number of usable cutting edges per insert, while the standardised ISO designation supports straightforward integration into existing toolholders. These factors combine to lower set-up time and simplify inventory management in toolrooms and production shops. For tailored advice on integrating Walter Tools inserts into production and to arrange prompt supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the optimal insert and supply options Technical data Article number: RDMT10T3M0-D57-WKP25S-WALTER Product type: Fräswendeschneidplatte ISO designation: RDMT10T3M0-D57 WKP25S Facts Plate size: 10 Plate thickness: T3 Clearance angle: 15° Tolerance class: M Special features Tiger·tec Silver coating Grade: WKP25S Chipbreaker: D57 Plate form: Round Material suitability: Steel (P), Cast iron (K) FAQ What materials is this insert suitable for? The RDMT10T3M0-D57 WKP25S insert is optimised for steel (P) and cast iron (K) applications, leveraging the Tiger·tec Silver coating for abrasion and heat resistance. How does the D57 chipbreaker improve machining? The D57 chipbreaker on this round insert provides controlled chip formation and reliable evacuation, which helps maintain surface quality and reduces the chance of chip-related interruptions. What benefits does the Tiger·tec Silver coating offer? Tiger·tec Silver increases wear resistance and edge robustness, extending tool life and enabling more consistent performance across production batches. Is the RDMT10T3M0-D57 WKP25S compatible with standard toolholders? Yes, the insert uses an ISO-standard designation and the M tolerance class to ensure straightforward fitting into compatible round insert toolholders and adapters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is a registered brand. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation. The offered article is original, brand-new merchandise from the manufacturer.
RDMT10T3M0-D57 WKP35G Wendeplatten - Walter Tools
Benefit from high productivity and consistent chip control thanks to the Tiger·tec Gold coating and the WKP35G grade, engineered for steel and cast iron machining; order the insert directly via Metav Werkzeuge or consult our product specialists for application advice. RDMT10T3M0-D57 WKP35G – milling insert (round, 15° free angle) by Walter Tools The RDMT10T3M0-D57 WKP35G is a round milling insert designed for general steel and cast iron applications, delivering stable cutting performance and extended tool life under demanding conditions Tiger·tec Gold coating for extended tool life Optimised WKP35G grade for steel and cast iron Round insert, 15° free angle, stable cutting D57 chipbreaker for reliable chip control Boosted productivity for steel and cast iron operations The combination of a coated carbide substrate and the WKP35G grade provides a balance of wear resistance and fracture toughness aimed at high-throughput milling. This geometry reduces unplanned downtime by maintaining a stable cutting edge over longer tool life, which in turn improves process reliability. The round shape and 15° free angle enable consistent engagement across interrupted cuts and varied pocketing tasks, making the insert suitable for both roughing and semi-finishing operations on steel and cast iron. Coating and grade explained for clearer machinability choices The Tiger·tec Gold technology is a multi-layer coating system optimised for thermal and abrasive wear typical in steel and cast iron machining. The WKP35G grade is a Walter Tools specification of coated cemented carbide that emphasises stable chip formation and resistance to abrasive wear. The D57 chipbreaker supports controlled chip breaking and evacuation, reducing the risk of built-up edge and ensuring consistent surface quality. These combined features mean fewer tool changes and more predictable component output, especially in mixed‑batch production. Shop-floor advantages and handling guidance With a tolerance class M and a compact T3 thickness, the insert suits standard toolholders for indexed milling operations; the round form reduces orientation sensitivity during indexing. The geometry supports reliable performance in interrupted cuts and offers forgiving engagement when toolpaths vary. For best results, pair the insert with a toolholder specified for the RDMT series geometry and adjust feeds to match workpiece hardness. This approach reduces scrap rates and contributes to measurable cycle-time savings on recurring parts. For high‑productivity milling in steel and cast iron, contact Metav Werkzeuge to source the Walter Tools RDMT10T3M0‑D57 WKP35G insert and receive application support via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data SKU: RDMT10T3M0-D57-WKP35G-WALTER Product: Milling insert RDMT10T3M0-D57 WKP35G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Facts Size: 10 Thickness: T3 Free angle: 15° Insert form: Round Chipbreaker: D57 Tolerance class: M Material designation: P / K Special features Coated cemented carbide Optimised for steel and cast iron Stable chip formation Suitable for interrupted cuts Designed for reliable tool life FAQ What materials is this insert suitable for? The RDMT10T3M0‑D57 WKP35G insert is specified for steel (P) and cast iron (K), reflecting the WKP35G grade and Tiger·tec Gold coating designed for these workpiece groups. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes predictable chip control and evacuation; when combined with the WKP35G grade it reduces the risk of built‑up edge and supports consistent surface finish during milling. Which toolholders are compatible with this insert geometry? Round inserts with a T3 thickness and the RDMT family designation fit toolholders designed for the RDMT10T3M0‑D57 geometry; match the holder to the insert's diameter and clamping style for secure indexing. Is this insert suitable for interrupted cutting? Yes, the round form and 15° free angle provide robust edge engagement and resilience in interrupted cuts, making the insert a reliable choice for pocketing and face milling where engagement varies. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
RDMT10T3M0-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coating and the WKP35S grade to extend edge life and secure steady chip control during heavy and interrupted milling; for tailored assistance, request application advice from Metav Werkzeuge or consult their technical team. RDMT10T3M0-D57 WKP35S milling insert — Tiger‑tec Silver, for steel and cast iron by Walter Tools A RDMT10T3M0-D57 WKP35S indexable milling insert designed to deliver consistent cutting performance in roughing and finishing operations on steel and cast iron. Tiger‑tec Silver coating for long tool life WKP35S: coated carbide for steel and cast iron 15° clearance angle for stable cutting Round form RDMT10 with D57 chipbreaker Higher productivity through consistent edge life The combination of the Tiger‑tec Silver coating and the WKP35S grade yields a reliable edge that stands up to thermal and abrasive wear typical of machining steel and cast iron. The coated carbide substrate reduces flank wear and allows for longer cutting times between indexings, resulting in improved process stability and fewer tool changes. This directly supports higher machine utilisation and lower unit costs per part, making the insert particularly suitable for continuous production and mixed-batch work. Predictable chip control and surface quality The D57 chipbreaker geometry is engineered to control chip formation across a range of feeds, which reduces the risk of chip entanglement and supports consistent surface finish. Combined with the 15° clearance angle, the design promotes stable cutting forces and reduces vibration during heavy cuts. For applications where repeatability and component appearance matter, these features contribute to predictable component quality and reduced reworking. Versatile form factor and simple handling The round RDMT form and T3 thickness provide a robust seating and a balanced cutting edge suitable for a variety of toolholders intended for RDMT‑style inserts. The insert’s tolerance class M supports precise locating and repeatable positioning in the cutter body, helping to shorten set‑up time and simplify index changes. Operators benefit from straightforward handling and the ability to maintain consistent toolpaths over long runs. Practical advantages in everyday machining Designed for the ISO material groups P and K, the grade supports conventional steels and cast irons by addressing their characteristic heat and chip behaviour. The coated surface enhances resistance to built‑up edge and abrasive wear, which in turn delivers more predictable tool life and less unscheduled downtime. These practical benefits make the insert a sound choice for shops prioritising throughput and surface integrity. Discuss machining requirements and application optimisation with Metav Werkzeuge — contact Metav Werkzeuge for personalised recommendations and sample availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: RDMT10T3M0-D57-WKP35S-WALTER Article designation: RDMT10T3M0-D57 WKP35S Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Silver Grade: WKP35S Facts Insert size: 10 Thickness: T3 Clearance angle: 15° Tolerance class: M Special features Coating: Tiger‑tec Silver Material suitability: steel (P) and cast iron (K) Chipbreaker: D57 Shape: round (RDMT) Grade material: coated carbide FAQ What materials is this insert suitable for? The RDMT10T3M0-D57 WKP35S is specified for machining steel and cast iron, matching ISO groups P and K for general turning and milling tasks. How does the Tiger‑tec Silver coating help in production? Tiger‑tec Silver improves wear resistance and thermal stability on the WKP35S grade, which extends cutting intervals and supports steadier productivity in serial machining. What is the purpose of the D57 chipbreaker? The D57 chipbreaker promotes controlled chip formation across varying feeds, reducing chip tangling and helping to maintain consistent surface finish during both roughing and finishing cuts. Which toolholders are compatible with this insert form? The round RDMT form corresponds to standard RDMT‑style cutter bodies; the RDMT10 geometry ensures a secure seating and ease of indexing in compatible holders. What does the tolerance class M mean for workshop practice? Tolerance class M indicates a medium tolerance for dimensional and positional accuracy, supporting reliable repeatability and straightforward replacement without excessive re‑adjustment. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only; there is no affiliation between our company and the named brands. The offered article is original and brand‑new from the manufacturer. The brand in this listing is Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com