RDMT10T3M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the D57 chipbreaker to secure reproducible chip control and extended tool life during steel milling; the round RDMT10T3M0‑D57 WPP35G insert combines consistent performance with straightforward handling, ensuring productive milling cycles — order availability and technical consultation are provided via Metav Werkzeuge. RDMT10T3M0-D57 WPP35G – Milling indexable insert (Tiger‑tec Gold, D57 chipbreaker) – Walter Tools The RDMT10T3M0‑D57 WPP35G is a round indexable milling insert designed for efficient steel machining, offering a hard‑wearing coated carbide grade and an optimised chipbreaker for stable removal processes. Tiger‑tec Gold coating for long life D57 chipbreaker for controlled chip formation Round geometry for versatile milling Suited for machining steel (ISO P) Higher throughput through optimised coating and geometry The insert’s Tiger‑tec Gold coating and the WPP35G grade deliver a combination of wear resistance and toughness tailored to steel machining. Coated carbide technology reduces flank wear and helps maintain a consistent cutting edge over longer tool life, which directly translates into higher machining uptime and fewer tool changes in serial production. Choosing a grade engineered for steel ensures the thermal and mechanical behaviour during cutting is addressed, reducing the risk of unexpected tool failure and improving process predictability. Reliable chip control for improved surface quality The D57 chipbreaker is configured to produce short, controllable chips when cutting steels within ISO P. Reliable chip formation reduces the chance of re‑cutting and tool interference, which supports consistent surface finishes and dimensional stability across batches. With a 15° clearance angle, the insert balances cutting aggressiveness and edge support, aiding in the achievement of consistent component quality even under variable cutting conditions. Economical operation and repeatable results Using a dedicated grade such as WPP35G helps to lower the total cost per component by extending the interval between indexings and replacements. The round insert geometry supports a variety of milling strategies and pocketing routines, enabling flexibility across multiple operations without switching tool types. For production environments where repeatable results and predictable tool life are essential, this insert provides the economic advantage of fewer interruptions and steady output. Simple integration into existing tool systems The RDMT‑style insert is compatible with standard clamping systems and is straightforward to handle during tool set‑up and reconditioning. Clearly marked ISO designation and tolerance class M simplify tool management and inventory control. Because the grade is explicitly intended for steel (ISO P), process planners can integrate the insert into machining data sheets with confidence, reducing trial time and accelerating ramp‑up to full productivity. For reliable steel machining backed by Walter Tools’ Tiger‑tec Gold technology, request availability and cutting recommendations for the RDMT10T3M0‑D57 WPP35G from Metav Werkzeuge to align tool choice with production goals. Technical data Article number: RDMT10T3M0-D57-WPP35G-WALTER SKU / UID: RDMT10T3M0-D57-WPP35G-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert ISO designation: RDMT10T3M0-D57 WPP35G Core data Size / diameter: 10 Thickness: T3 Relief / clearance angle: 15° Chipbreaker: D57 Tolerance class: M Series: Tiger‑tec Gold Materials & features Grade: WPP35G (coated carbide) Application: Steel (ISO P) Shape: Round Style / execution: T Designed for reproducible chip control and extended tool life FAQ What materials is this insert intended for? The RDMT10T3M0‑D57 WPP35G insert is specified for machining steels (ISO P) and the WPP35G grade is optimised for the thermal and mechanical conditions encountered when cutting steel. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the WPP35G grade improves wear resistance and protects the cutting edge, enabling longer tool life and more consistent performance with the RDMT10T3M0‑D57 insert. What is the purpose of the D57 chipbreaker? The D57 chipbreaker promotes controlled, short chips for steel machining, reducing the risk of entanglement and improving surface finish when using the RDMT10T3M0‑D57 WPP35G. Is the insert suitable for finishing and roughing? The balanced toughness and wear resistance of the WPP35G grade make the insert suitable for a range of operations; process parameters determine whether it is used for roughing or finishing cycles. What documents help with tool selection for this insert? Technical data sheets and machining recommendations for the Walter Tools RDMT10T3M0‑D57 WPP35G should be consulted to select optimal cutting speeds and feeds for specific steel grades. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The item offered is original, factory‑new merchandise from the manufacturer.
RDMT10T3M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a D57 chipbreaker and a 15° relief angle to ensure stable chip formation and consistent tool life in demanding milling operations; order the RDMT10T3M0‑D57 WSP45G milling insert directly via Metav Werkzeuge or contact our consultants for machining advice. RDMT10T3M0‑D57 WSP45G milling insert — Tiger‑tec Gold, Walter Tools The RDMT10T3M0‑D57 WSP45G is a round milling insert engineered for robust milling of steel, stainless steel and heat‑resistant superalloys in general milling applications. Tiger‑tec Gold PVD coating for extended tool life Suitable for Steel, stainless steel and superalloys 15° relief angle for stable cutting performance Round insert with D57 chipbreaker for secure chip control Greater productivity through advanced coating technology The combination of the WSP45G grade and the Tiger‑tec Gold coating delivers a measurable improvement in process stability. As a PVD‑coated carbide grade, the material offers high resistance to wear and maintains a stable cutting edge under elevated temperatures. This results in longer intervals between indexings and fewer tool changes, which supports continuous production and lowers overall machining costs. For shops seeking predictable tool life and consistent component quality, the coating technology reduces flank wear and improves resistance to built‑up edge formation during steel and stainless‑steel milling. Reliable chip control and edge stability for consistent results The round geometry combined with the D57 chipbreaker is designed to control chip shape and evacuation during interrupted or continuous milling. The 15° relief angle provides a compromise between cutting edge strength and cutting entry ease, reducing vibration and supporting repeatable surface finishes. The T3 thickness ensures adequate insert bulk for stable clamping and resistance to edge chipping. Together, these characteristics allow the insert to perform reliably across a range of feeds and depths of cut, making it suitable for both semi‑roughing and finishing operations where predictable chip behaviour is critical. Application guidance and material suitability Designed for the ISO material groups P / M / S, this indexable insert is suitable for unalloyed and alloyed steels, stainless steel and heat‑resistant superalloys or titanium. The grade’s toughness supports secure chip formation in materials that tend to work‑harden or generate high thermal loads. When selecting cutting parameters, prioritise stable clamping and appropriate coolant or dry‑cut strategies to match the workpiece characteristics. If process security and repeatable surface quality are priorities, this insert provides a balanced solution for many milling tasks while keeping setup changes to a minimum. For ordering or technical recommendations on the RDMT10T3M0‑D57 WSP45G from Walter Tools, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: RDMT10T3M0-D57-WSP45G-WALTER Item: RDMT10T3M0‑D57 WSP45G Type: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Grade: WSP45G Series: Tiger‑tec Gold Facts Relief angle: 15° Insert size: 10 Thickness code: T3 Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger‑tec Gold (PVD) Grade material: P / M / S Form: Round Sortenbeschreibung: PVD‑coated carbide, versatile for milling Intended use: Milling of steel, stainless steel and superalloys FAQ What materials is this insert suitable for? The RDMT10T3M0‑D57 WSP45G is intended for ISO groups P, M and S, covering steel, stainless steel and heat‑resistant superalloys or titanium. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance and thermal stability on the RDMT10T3M0‑D57, extending tool life and supporting consistent cutting performance under elevated temperatures. How does the D57 chipbreaker affect milling? The D57 chipbreaker on the insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of edge build‑up during intermittent cuts. Is the insert suitable for both roughing and finishing? Yes; the round geometry and robust grade make the insert adaptable for semi‑roughing and finishing, offering a balance between edge strength and cutting smoothness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by the trademark holders. The offered article is an original, factory‑new product of the stated manufacturer; all brand names are used solely to clarify product compatibility and origin.
RDMT1204M0-D57 WKP35G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WKP35G grade together with a precise 15° relief for consistent, high-productivity milling of steel and cast iron; order inserts via Metav Werkzeuge or consult our advisors for application-specific recommendations. RDMT1204M0-D57 WKP35G milling insert — Round geometry, Tiger·tec Gold, for steel & cast iron — Walter Tools RDMT1204M0-D57 WKP35G is a round milling insert designed for reliable finishing and semi-finishing operations in steel and cast iron where consistent chip control and long tool life are essential Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron 15° relief angle for stable cutting forces Round insert with D57 chipbreaker performance Process reliability through advanced coating and grade The Tiger·tec Gold coating combined with the WKP35G substrate provides optimised wear resistance and predictable flank behaviour, which translates into longer tool life and fewer interruptions for tool changes. The coated hardmetal technology reduces abrasive wear when machining ferrous materials, helping to maintain dimensional stability over longer production runs. For machining operations that demand repeatable surface quality, this insert supports stable feeds and allows consistent component tolerances with reduced rework. Better chip control for uninterrupted production The D57 chipbreaker on the round geometry directs chips reliably during interrupted and continuous cuts, reducing the risk of entanglement and machine downtime. Controlled chip formation lowers heat concentration at the cutting edge and facilitates evacuation from the cut zone, which improves surface finish and reduces the need for secondary operations. The combination of round insert form and chipbreaker design is particularly effective where varied depths of cut and mixed interruptions occur. Broad material capability keeps tooling simple This insert is specified for ISO groups P (steel) and K (cast iron), enabling a single grade to cover a wide range of workpiece materials commonly encountered in general machining and component production. Using one versatile grade reduces inventory complexity and simplifies tool selection, while still delivering the cutting performance required for both unalloyed and alloyed steels as well as abrasive cast iron grades. Geometry and tolerance that support precision and repeatability A 15° relief angle reduces cutting forces and helps to stabilise the cutting edge under varying engagement conditions, while the round plate geometry offers robustness at the nose and consistent contact conditions during radial engagement. The M tolerance class ensures reliable interchangeability and repeatable positioning in modern toolholders. Together these characteristics support efficient mass production with sustained surface quality and dimension control. For tailored cutting data or to request application-specific recommendations for Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical assistance. Technical Data Article number / SKU: RDMT1204M0-D57-WKP35G-WALTER Label: Fräswendeschneidplatte RDMT1204M0-D57 WKP35G Walter Tools Facts Relief angle: 15° Plate size: 12 Thickness code: 04 Tolerance class: M Special features Grade: WKP35G Series: Tiger·tec Gold Material suitability: P / K Chipbreaker: D57 Plate form: Round Execution: T FAQ Which materials can this insert machine effectively? The RDMT1204M0-D57 WKP35G insert is intended for steel (ISO group P) and cast iron (ISO group K), offering balanced wear resistance and chip control for both material families. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this insert improves abrasive wear resistance and thermal stability, which contributes to longer tool life and more consistent component quality across extended runs. How does the D57 chipbreaker affect machining performance? The D57 chipbreaker promotes short, controllable chips and efficient evacuation, reducing the chance of chip re-cutting and supporting uninterrupted machining cycles with better surface finish. What does the 15° relief angle mean for cutting forces? A 15° relief angle reduces radial cutting forces and helps to stabilise the cutting edge, which benefits finish quality and tool life when milling variable engagement profiles. Is the round plate geometry advantageous for interrupted cuts? Yes, the round geometry offers a strong cutting nose and even load distribution, making it well suited to operations with interruptions and varied engagement depths. Manufacturer/Responsible: Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Markenznamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT1204M0-D57 WKP35S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, reliable WKP35S grade and a 15° clearance angle for consistent chip control and long tool life; order the milling insert directly via Metav Werkzeuge or consult our application specialists for material‑specific guidance. RDMT1204M0-D57 WKP35S milling insert — Tiger‑tec Silver, for steel and cast iron | Walter Tools A versatile milling insert, RDMT1204M0-D57 WKP35S, engineered for medium‑to‑high productivity milling in steel and cast iron applications, featuring a round form and D57 chipbreaker for controlled swarf formation Tiger‑tec Silver coating for stable edges WKP35S grade for steel and cast iron 15° clearance angle for versatile engagement Round form Ø12 with D57 chipbreaker High process reliability for steel machining The coated carbide grade from the Tiger‑tec Silver range offers a balance of wear resistance and edge toughness suited to machining steel. The patterned coating technology reduces flank wear and supports repeatable cuts under fluctuating loads. With a WKP35S specification, the insert is tailored to the thermal and chip‑forming behaviour typical of unalloyed and alloyed steels; the result is stable cutting performance and improved corner life compared with standard grades. This enables fewer tool changes and steadier cycle times on production machines. Robust performance when cutting cast iron For cast iron work, the chipbreaker geometry D57 and the round insert form promote short, fragmenting chips and effective evacuation. The combination of the chip control geometry and the coated substrate reduces abrasive wear common with grey and nodular cast irons. When used in the recommended application window, this geometry supports consistent surface quality and reduces the risk of chip entanglement in interrupted cuts. The specification explicitly targets the P and K groups of ISO 513, meaning suitability for both steel and cast iron operations. Versatile geometry and dimensional control The insert is supplied in a round form with a nominal size of 12 and a plate thickness indicated as 04, paired with a 15° clearance angle that allows reliable engagement across a range of cutting depths and axial feeds. The tolerance class M ensures consistent seat fit and repeatability in standard toolholders, which is crucial for indexed multi‑edge use. The round geometry also permits easy orientation on the toolbody and reduces sensitivity to small positional deviations, enhancing process robustness on high‑volume machining lines. Practical benefits for production planning Choosing this grade and geometry leads to measurable operational advantages: improved tool life through advanced coating, controlled chip formation with the D57 breaker and fewer interruptions for tool changes. These benefits translate into higher uptime and more predictable tool‑change intervals, supporting lean production workflows. For users less familiar with technical designations, the insert combines a modern coating technology with a grade optimised for common ferrous materials, delivering straightforward performance gains in everyday milling tasks. Select the Walter Tools RDMT1204M0‑D57 WKP35S when process stability and chip control matter, and contact Metav Werkzeuge for delivery options and application advice — Metav Werkzeuge is available to support material‑specific recommendations Technical data Article number: RDMT1204M0-D57-WKP35S-WALTER Type: Milling insert Designation: RDMT1204M0‑D57 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Size: 12 Clearance angle: 15° Plate thickness: 04 Tolerance class: M Chipbreaker: D57 Special features Coating / technology: Tiger‑tec Silver Suitable for: steel (P) and cast iron (K) Shape: Round Execution: T Material composition: coated carbide FAQ What materials is this insert designed for? The RDMT1204M0‑D57 WKP35S insert is specified for steel and cast iron machining (ISO groups P and K) and combines the Tiger‑tec Silver technology with the WKP35S grade for those materials. How does the D57 chipbreaker affect cutting? The D57 chipbreaker on this round insert promotes short, controllable chips and reliable evacuation, improving surface finish and reducing the risk of chip clogging in interrupted or heavy cuts. Is the clearance angle suitable for general milling tasks? Yes; the 15° clearance angle provides versatile engagement across a range of axial depths and feeds, offering a compromise between positive cutting action and edge strength for varied milling operations. Can the insert be used in multi‑edge indexing applications? The round geometry and tolerance class M ensure repeatable seating and reliable indexing, making the insert suitable for tools designed to use multiple cutting edges per index. What benefits does the Tiger‑tec Silver series provide? Tiger‑tec Silver coating reduces flank wear and enhances edge stability under thermal and mechanical load, contributing to longer edge life and consistent cutting performance in both production and jobbing environments. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
RDMT1204M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a high‑performance Tiger‑tec Gold coating and the wear‑resistant WPP35G grade for efficient steel machining, combined with the stabilising D57 chipbreaker and a 15° clearance angle for reliable cutting results. Order the RDMT1204M0‑D57 WPP35G milling insert directly via Metav Werkzeuge or consult our advisors for application guidance. RDMT1204M0‑D57 WPP35G milling insert (for steel) — Walter Tools RDMT1204M0‑D57 WPP35G is a round milling indexable insert engineered for productive steel machining with Tiger‑tec Gold coating Tiger‑tec Gold coated carbide grade WPP35G Optimised D57 chipbreaker for steel machining 15° clearance angle for stable cutting Round 12 mm insert, tolerance class M Consistent cutting performance thanks to advanced coating technology The combination of the Tiger‑tec Gold coating and the WPP35G grade gives a balance of wear resistance and toughness specifically tuned for machining steel (P). The coating reduces flank wear and heat transfer, which extends tool life and maintains dimensional accuracy over longer runs. This means fewer tool changes and higher machine uptime, supporting predictable production schedules and lower overall tooling cost per component. The plated surface also helps to maintain a stable cutting edge under elevated temperatures typical for steel machining. Predictable chip control and secure cutting with the D57 geometry The insert’s D57 chipbreaker is developed to control chip formation when cutting a wide range of steels, improving evacuation and reducing the risk of built‑up edge. Combined with a 15° clearance angle, the geometry reduces cutting forces and vibration, delivering a more stable process and improved surface finish. For CNC milling operations where repeatability matters, this geometry supports consistent part quality and fewer downstream operations for finishing. Practical application and machinability guidance for workshop use Designed as a versatile solution for roughing and finishing operations in steel, the insert suits various feed and speed windows thanks to its coated carbide substrate. The round form and size 12 promote multi‑edge use on indexable holders, helping to make tool inventory economical. When specifying cutting parameters, start from conservative feeds and speeds appropriate for the material grade and increase stepwise while monitoring surface finish and tool wear. The tolerance class M ensures reliable fit in standard toolholders and repeatable positioning for amplitude‑sensitive milling tasks. Backed by Walter Tools’ Tiger‑tec Gold technology, contact Metav Werkzeuge for supply and tailored technical advice on integrating the RDMT1204M0‑D57 WPP35G into production. Technical data Article number: RDMT1204M0-D57-WPP35G-WALTER Designation: RDMT1204M0-D57 WPP35G Manufacturer: Walter Tools Core specifications Size: 12 Thickness: 04 Clearance angle: 15° Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP35G (coated carbide) Chipbreaker: D57 Form: Round Material application: Steel (P) Series: Tiger‑tec Gold FAQ What types of steel is this insert best suited for? The RDMT1204M0‑D57 WPP35G insert is designed for a broad range of steel grades (ISO group P), offering a balanced combination of wear resistance and toughness for common unalloyed and alloyed steels. How does the Tiger‑tec Gold coating improve tool life? The Tiger‑tec Gold coating on WPP35G reduces flank wear and improves heat resistance, allowing the insert to maintain cutting edge integrity for longer periods during steel machining. Is the D57 chipbreaker suitable for finishing operations? Yes, the D57 chipbreaker supports controlled chip formation and can be used in both roughing and finishing when cutting parameters are adapted to the desired surface quality. Can the insert be indexed multiple times to use all cutting edges? The round form and grade permit multiple indexes; the insert’s geometry and tolerance class M ensure consistent seating and repeatable positioning in compatible holders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for clarification purposes only. There is no affiliation between Metav Werkzeuge and the cited manufacturers. The offered item is original, brand‑new product of the manufacturer.
RDMT1204M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, WSM35G grade and a 15° clearance angle for secure chip control in demanding stainless and superalloy milling; order the RDMT1204M0-D57 WSM35G milling insert directly via Metav Werkzeuge or consult the specialists for application-specific advice. RDMT1204M0-D57 WSM35G milling indexable insert — Tiger·tec Gold, 15° clearance, Walter Tools RDMT1204M0-D57 WSM35G is a round milling indexable insert engineered for controlled chip formation and stable cutting performance when machining stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for thermal stability 15° clearance angle for reliable cutting D57 chipbreaker for controlled chip formation Designed for stainless steel and superalloys Consistent performance in demanding materials The WSM35G grade from the Tiger·tec Gold series combines a wear‑resistant, coated carbide substrate with a geometry optimised for challenging materials. The insert’s round form and the D57 chipbreaker promote stable chip control, especially when processing tough stainless steels and heat‑resistant superalloys that tend to work‑harden and generate high temperatures. The result is fewer unexpected interruptions, reduced tendency for built‑up edge and a more predictable tool life, which supports steady production cycles and quality consistency. Edge security and thermal stability explained A 15° clearance angle reduces flank rubbing and helps maintain a clean cutting action under load; paired with the Tiger·tec Gold coating this provides thermal stability and resistance to edge breakdown. The coating enhances heat protection at the cutting edge while the substrate supports mechanical strength — together they deliver edge stability and reliable re‑indexing in multi‑flank operations. In practice, this means the insert keeps a sharper effective cutting edge for longer, which is particularly valuable when feeds and speeds are constrained by workpiece material properties. Operational advantages for process security The round geometry and standard designations make the insert straightforward to replace and index in common milling systems, improving uptime and simplifying tool inventory. Its suitability for the ISO material groups S and M supports flexibility across mixed production runs where both superalloys and stainless steels are present. By focusing on controlled chip flow and durable edge condition, the insert helps reduce cycle variability and supports consistent surface finish, so machining centres can run with greater confidence and fewer interventions. Contact Metav Werkzeuge to specify the correct Walter Tools RDMT1204M0-D57 WSM35G solution for stainless and superalloy machining Technical data Article number: RDMT1204M0-D57-WSM35G-WALTER Designation: RDMT1204M0-D57 WSM35G Product type: milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Facts Clearance angle: 15° Size designation: 12 Thickness designation: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Material groups: S / M Chipbreaker: D57 Form: round Suitable for: stainless steels, heat‑resistant superalloys FAQ Which materials are suitable for this insert? The RDMT1204M0-D57 WSM35G insert by Walter Tools is designed for ISO groups S and M, i.e. heat‑resistant superalloys and stainless steels, offering reliable chip control in both material families. What benefit does the D57 chipbreaker provide? The D57 chipbreaker promotes controlled fragmentation and evacuation of chips; in the WSM35G grade the chipbreaker works with the coated substrate to reduce built‑up edge and improve process stability. Why is the 15° clearance angle important? A 15° clearance angle minimises flank contact and rubbing during cutting, helping to preserve the cutting edge and maintain consistent surface quality under higher thermal and mechanical loads. How is the insert designated and what does the size mean? The RDMT1204M0-D57 designation describes the insert geometry and chipbreaker; the size designation "12" and thickness code "04" are manufacturer designations used to match the insert to the corresponding toolholder. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory‑new product of the stated manufacturer.
RDMT1204M0-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G grade and the D57 chipbreaker to secure stable chip formation and extended tool life in milling operations; order directly via Metav Werkzeuge or consult the team for machining data and cutting parameters. RDMT1204M0-D57 WSP45G milling indexable insert, Tiger·tec Gold coating — Walter Tools A RDMT1204M0-D57 WSP45G milling indexable insert engineered for dependable performance in machining Stahl, rostfreier Stahl and high-temperature alloys, suited to versatile roughing and finishing operations Tiger·tec Gold PVD coating for long tool life Versatile grade WSP45G for P / M / S materials Round insert with D57 chipbreaker for stable chips 15° clearance for reliable cutting geometry High process reliability across diverse materials The Tiger·tec Gold coating combined with the WSP45G grade provides a balance of toughness and thermal resistance, which translates into consistent edge life when machining a wide range of alloys. Designed for the P / M / S groups, the insert supports applications in Stahl, rostfreier Stahl and heat-resistant superalloys or titanium, reducing the risk of edge breakdown and enabling longer productive runtime per index. This technical balance helps maintain component accuracy and reduces downtime for insert changes while keeping machining costs under control. Better chip control and surface quality with D57 geometry The D57 chipbreaker and the insert’s round form produce controlled chip formation and reliable evacuation in interrupted and continuous cuts. The combination of chipformer geometry and a 15° free angle lowers built-up edge tendencies during heavy feeds and high temperatures, delivering improved surface finish and minimised rework. Stable chip flow also supports safer machining conditions and enhances process predictability when taking on mixed-batch work or challenging geometries. Economic advantages through predictable tool behaviour The coated carbide grade and the insert’s construction aim to provide repeatable performance and extended life, supporting a clear cost-benefit calculation for production runs. Fewer indexings and predictable wear patterns reduce tool management overhead. The RDMT1204M0-D57 WSP45G insert’s design focuses on productivity—enhanced cutting security and steady edge retention contribute to shorter cycle times and a lower total cost per component in both jobbing environments and series production. Practical compatibility and application guidance The insert suits a broad spectrum of milling tasks, from general-purpose roughing to semi-finish passes, and demonstrates particular strength where material mix and temperature load vary. Compatible materials are described by the P / M / S classification: P for Stahl, M for rostfreier Stahl and S for superalloys and titanium—each demanding a combination of toughness and wear resistance that this grade delivers. For users less familiar with ISO material groups, the classification indicates suitability rather than the insert’s composition. Contact Metav Werkzeuge for tailored cutting data, application recommendations and ordering support for Walter Tools inserts — info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: RDMT1204M0-D57-WSP45G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Designation: RDMT1204M0-D57 Grade: WSP45G Series: Tiger·tec Gold Core specifications Free angle: 15° Insert size: 12 Thickness: 04 Tolerance class: M Materials & features Coating technology: Tiger·tec Gold (PVD) Material suitability: P / M / S (Stahl, rostfreier Stahl, superalloys/titanium) Chipbreaker: D57 Shape: Round Execution: T FAQ What applications suit this insert best? The RDMT1204M0-D57 WSP45G insert is intended for milling applications across Stahl, rostfreier Stahl and superalloys, providing a versatile solution for roughing and semi-finishing tasks. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold coating on the WSP45G grade improves thermal resistance and wear behaviour, helping the insert maintain cutting-edge stability under varying temperatures and loads. What role does the D57 chipbreaker play in performance? The D57 chipbreaker promotes controlled chip formation and evacuation, which supports surface quality and reduces built-up edge, particularly in mixed or interrupted milling cuts. Is the insert suitable for high-temperature alloys and titanium? Yes, the S classification within the P / M / S suitability indicates applicability to heat-resistant superalloys and titanium, where thermal and mechanical stresses demand a robust grade Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT1605M0-D57 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver grade and the WKP25S chemistry to increase process stability and reduce tool changes; the combination of a round geometry with a D57 chipbreaker and a 15° clearance angle delivers reliable chip control and consistent surface finish in mixed steel and cast iron production. Order via Metav Werkzeuge or consult their technical team for cutting-parameter recommendations. RDMT1605M0-D57 WKP25S milling insert (RDMT1605M0-D57) – Tiger‑tec Silver grade for Steel and Cast iron | Walter Tools A RDMT1605M0-D57 WKP25S indexable milling insert designed for versatile pocketing and roughing operations in Steel and Cast iron, offering stable wear and reliable chip control. Tiger‑tec Silver coated grade WKP25S Round form for versatile pocketing 15° clearance angle for stable cutting Suited for steel and cast iron machining Consistent productivity through a hard‑wearing grade The WKP25S grade from the Tiger‑tec Silver family emphasises extended life under the heat and abrasion typical of machining Steel and Cast iron. The coated, wear‑resistant substrate reduces flank and crater wear, which in turn lowers the frequency of tool changes and increases overall productivity. For operations with variable batch sizes, this means fewer interruptions and a steadier output rate. The chemistry and coating are tuned to maintain edge integrity during intermittent or continuous cuts, supporting predictable performance across shifts. Stable cutting and improved chip management A round insert geometry combined with the D57 chipbreaker and a 15° clearance angle supports controlled chip formation and evacuation in pocketing and shoulder milling. The chipbreaker design promotes short, manageable chips when cutting cast iron and segmented chips when machining steel, which reduces the risk of chip packing and feed interruptions. The geometry also offers a forgiving cutting edge that helps protect the tool during entry and exit, contributing to a stable process and improved consistent surface finish over multiple passes. Application guidance for longer tool life and repeatability This insert is suited where mixed machining of Steel (P) and Cast iron (K) occurs; the grade balances toughness and wear resistance to withstand both adhesive and abrasive wear mechanisms. Choosing appropriate feeds and depths that match machine rigidity will exploit the insert’s strengths—reduced vibration, stable edge retention and predictable wear progression—resulting in optimised tool life and repeatable component quality. The round shape and tolerance class M also simplify toolholder selection for multi‑purpose cutters, allowing efficient inventory and tool management. For tailored cutting parameters, batch suitability checks and delivery options for Walter Tools Tiger‑tec Silver WKP25S inserts contact Metav Werkzeuge for expert consultation and prompt processing Technical Data SKU: RDMT1605M0-D57-WKP25S-WALTER Article: RDMT1605M0-D57 WKP25S Product type: Milling insert Manufacturer: Walter Tools Grade / Series: WKP25S / Tiger‑tec Silver Shape: Round Chipbreaker: D57 Clearance angle: 15° Execution: T Tolerance class: M Base material designation: P / K Designation without grade: RDMT1605M0-D57 ISO designation: RDMT1605M0-D57 WKP25S Plate size: 16 Plate thickness: 05 Numerical data Insert size: 16 Plate thickness: 05 Clearance angle: 15° Tolerance class: M Applications & Features Coating / Grade: WKP25S (Tiger‑tec Silver) Material suitability: Steel (P) Material suitability: Cast iron (K) Shape: Round Chip control: D57 chipbreaker Series information: Tiger‑tec Silver Execution: T FAQ What materials is this insert suitable for? The RDMT1605M0-D57 WKP25S insert is designed for machining Steel (P) and Cast iron (K), leveraging the Tiger‑tec Silver grade for balanced wear resistance and toughness. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP25S grade improves heat and wear resistance, which enhances tool life and helps maintain a consistent surface finish during extended runs with the RDMT1605M0-D57 insert. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and evacuation for both steel and cast iron operations, reducing the risk of chip packing and supporting steady cutting conditions with this insert. Is the round geometry suitable for shoulder milling? Yes, the round form of this insert provides versatility for pocketing and shoulder milling, offering a resilient cutting edge that tolerates entry/exit loads and supports stable cutting. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer.
RDMT1605M0-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a WKP35G grade optimised for abrasive and adhesive wear, and a compact round form for steady chip control — engineered to keep milling cycles productive and predictable; order via Metav Werkzeuge or consult their team for application guidance. RDMT1605M0-D57 WKP35G milling insert — Tiger‑tec Gold, 15° relief (Walter Tools) RDMT1605M0-D57 WKP35G is a round milling indexable insert designed for general-purpose finishing and medium-duty roughing in steel and cast materials Tiger‑tec Gold coating for high productivity Optimised for Stahl and Gusseisen machining 15° relief for stable cutting performance Round 16 form with D57 chipbreaker Faster machining thanks to advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G carbide grade provides a balance of thermal stability and wear resistance that translates into extended tool life and fewer insert changes. The surface treatment reduces friction and supports consistent cutting-edge behaviour under typical milling loads, which results in higher process reliability and steady throughput. For workshops focusing on efficiency, this means fewer interruptions and a more predictable production rhythm. Consistent chip control and geometry for cleaner surfaces The D57 chipbreaker geometry in the round 16 form creates controlled chip formation that reduces built-up edge and promotes smooth evacuation, particularly when working with Stahl and Gusseisen. The insert’s 15° relief angle contributes to cutting stability and lowers the risk of premature edge failure by managing cutting forces effectively. As a result, operators can expect improved surface finishes and repeatable dimensional outcomes on a range of component geometries. Robust tolerance and form for flexible clamping solutions Manufactured to toleranzklasse M, the insert offers the dimensional consistency required for reliable repeatability in production environments. The compact thickness and round form support flexible cutter body designs and allow secure seating in standard indexable milling holders. This combination of accurate form and a wear-resistant grade ensures economical performance across batch production, making the insert suitable for both job-shop and in-house machining operations. Contact Metav Werkzeuge for tailored recommendations on cutter bodies, grade selection and order placement for the WKP35G Tiger‑tec Gold inserts Technical data SKU: RDMT1605M0-D57-WKP35G-WALTER Designation: RDMT1605M0-D57 Grade: WKP35G Series: Tiger‑tec Gold Numbers / Core data Form size: 16 Relief angle: 15° Thickness: 05 Tolerance class: M Designs / Special features Round insert form Chipbreaker: D57 Suitability: Stahl and Gusseisen Execution: T FAQ What materials is this insert best suited for? The RDMT1605M0‑D57 WKP35G insert is designed primarily for machining Stahl and Gusseisen, leveraging the Tiger‑tec Gold technology to handle both adhesive and abrasive wear modes. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold on the WKP35G grade reduces friction and increases thermal resistance, which leads to longer edge life and more consistent cutting conditions for milling operations. What benefits does the round 16 form with D57 chipbreaker provide? The round 16 geometry combined with the D57 chipbreaker ensures controlled chip formation and good surface quality, especially in applications where chip evacuation and edge integrity are critical. Is the insert compatible with standard cutter bodies? Yes, the insert’s form and toleranzklasse M allow reliable seating in many standard indexable milling cutters; toolbody selection should match the round form and seat geometry. Can this insert be used for heavy roughing? The WKP35G grade and coating favour finishing and medium-duty roughing; for heavy interrupted cuts or extremely abrasive conditions, consider a grade specified for heavy-duty operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT1605M0-D57 WKP35S Wendeplatten - Walter Tools
High-performance Tiger‑tec Silver grade and a 15° clearance angle ensure stable chip control and long tool life when machining steel and cast iron; the round Ø16 geometry and tailored D57 chipbreaker support reliable milling performance. Order the RDMT1605M0‑D57 WKP35S insert via Metav Werkzeuge or consult their specialists for application advice. RDMT1605M0-D57 WKP35S milling insert — Tiger‑tec Silver grade, 15° clearance — Walter Tools The RDMT1605M0‑D57 WKP35S is a round milling insert engineered for efficient machining of steel and cast iron, offering a blend of wear resistance and process stability for general-purpose and interrupted milling. Tiger‑tec Silver coated carbide grade WKP35S Suitable for steel (P) and cast iron (K) Round insert Ø16 with 15° clearance angle Chipbreaker D57 for improved chip control Consistent wear resistance and extended tool life The Tiger‑tec Silver coating combined with the WKP35S grade provides robust wear resistance and predictable edge behaviour in demanding operations. The coated carbide substrate is designed to tolerate the thermal and mechanical loads typical of machining steel and cast iron, which reduces flank wear and extends indexable insert life. This stability leads to fewer tool changes and a more continuous production flow, translating into lower process costs and improved uptime. The description of the grade emphasises stable chip formation and broad workpiece coverage, supporting consistent productivity in mixed-batch workshops. Material suitability and reliable chip control Designed for the ISO P and K groups, the geometry and the D57 chipbreaker are optimised for the short, often brittle chips of cast materials and the continuous chips of steel. The chipbreaker reduces re-cutting and helps evacuate chips from the cut, improving surface finish and reducing heat accumulation at the cutting edge. For shops transitioning between cast iron and unalloyed or alloyed steels, this insert offers a balanced compromise between toughness and abrasion resistance, ensuring dependable results across common industrial applications without the need for frequent grade swaps. Practical geometry for efficient handling and repeatability The round form and nominal size Ø16 simplify seat alignment and index changes, while the clearance angle of 15° supports general-purpose milling and interrupted cuts where an aggressive entry edge could otherwise chip. The tolerance class M indicates consistent manufacturing accuracy for repeatable clamping and predictable run-out. The thin profile (code 05) is suited to applications requiring a compact cutting edge; the insert designation and chipbreaker code make tool selection straightforward for process planners and toolroom staff. Overall, the design reduces setup complexity and contributes to reproducible component quality. Application advice and process integration For effective integration into an existing toolset, match the insert seat and cutter body to the RDMT family and confirm clamping suitability for the round geometry. Given its balance of abrasion resistance and toughness, this insert is particularly effective in mixed-production environments where flexibility between steel and cast iron is a priority. When process windows are uncertain, request cutting-parameter guidance from the distributor to establish feed and speed baselines for the chosen workpiece material and machine rigidity. For enquiries about application suitability, stock availability or to request tailored cutting-data recommendations for the Tiger‑tec Silver WKP35S grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RDMT1605M0-D57-WKP35S-WALTER Label: Fräswendeschneidplatte RDMT1605M0-D57 WKP35S Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Silver Grade: WKP35S Core Data Diameter: 16 mm Thickness code: 05 Clearance angle: 15° Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Suitable for: P (steel), K (cast iron) Chipbreaker: D57 Shape: Round Execution: T ISO designation: RDMT1605M0-D57 WKP35S FAQ What materials is this insert suitable for? The RDMT1605M0‑D57 WKP35S insert is specified for ISO groups P and K, meaning it is suitable for steel and cast iron applications. What does the WKP35S grade offer in practice? WKP35S, a Tiger‑tec Silver coated grade from Walter Tools, combines abrasion resistance and edge stability to provide predictable wear behaviour and good performance across a wide material range. How does the D57 chipbreaker affect machining? The D57 chipbreaker assists controlled chip formation and evacuation, which improves surface finish and reduces the risk of chip packing during milling operations. Is the 15° clearance angle suitable for interrupted cuts? Yes—the 15° clearance offers a compromise between strength and cutting action that suits many interrupted and general-purpose milling tasks. Which cutter bodies are compatible with this insert designation? This insert follows the RDMT family geometry; it is intended for milling bodies that accept RDMT1605‑style round inserts and provide the appropriate seat for secure clamping. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for identification and explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
RDMT1605M0-D57 WPP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP35G grade for extended tool life and stable chip formation, ensuring fewer tool changes and consistent throughput. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. RDMT1605M0-D57 WPP35G Fräswendeschneidplatte (for steel) — Walter Tools, Tiger·tec Gold coated carbide, 15° relief RDMT1605M0-D57 WPP35G is a round indexable milling insert designed for productive machining of steel; its Tiger·tec Gold coating and D57 chipbreaker deliver reliable chip control and durable cutting edges. Tiger·tec Gold coating for long life Grade WPP35G, coated carbide performance Round geometry for flexible indexing 15° relief for reduced cutting forces High wear resistance that reduces downtime The Tiger·tec Gold coating combined with the WPP35G carbide grade provides a hard-wearing surface that resists abrasive wear and maintains edge stability under typical steel machining temperatures. This results in longer tool life and fewer unscheduled tool changes, which improves machine uptime. For production environments aiming to reduce tooling costs per component, the coated grade offers a measurable improvement in service intervals while keeping process parameters stable. Optimised chip control for safer, predictable machining Equipped with the D57 chipbreaker, the insert promotes consistent chip formation when cutting steels classified under ISO P. The chipbreaker geometry supports reliable evacuation and lowers the risk of built-up edge, improving both surface finish and operator safety. The 15° relief angle reduces cutting forces and vibration, enabling smoother feeds and more predictable tool behaviour in moderate- to heavy-duty milling operations. Flexible round geometry for economical tool utilisation The round insert format allows multiple effective cutting positions through indexing, which spreads wear across several edges and enhances cost efficiency per edge. The RDMT designation indicates a geometry optimised for stable seating and repeatable positioning in compatible toolholders. Combined with the medium tolerance class M, the design supports consistent results in serial production where repeatability and process reliability are priorities. Practical advantages for workshop productivity By pairing the insert’s coated carbide grade and chip control features, operators achieve a balance of productivity and surface quality that suits general steel machining. The format and grade are particularly helpful in mixed-batch production where quick tool changes and consistent part quality are required. For customers seeking further guidance on machining parameters or toolholder options, Metav Werkzeuge can provide tailored recommendations based on material grade and machine capability. Contact Metav Werkzeuge for application recommendations and availability of Walter Tools Tiger·tec Gold inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: RDMT1605M0-D57-WPP35G-WALTER Designation: RDMT1605M0-D57 WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert size: 16 Thickness: 05 Relief angle: 15° Tolerance class: M Special features Grade: WPP35G (coated carbide) Chipbreaker: D57 Geometry: round insert (RDMT) Application: Steel (ISO P) Execution: T FAQ What steels is this insert intended for? The RDMT1605M0-D57 WPP35G insert is formulated for machining steels (ISO P); the WPP35G grade and Tiger·tec Gold coating handle the heat and chip formation typical of steel cutting. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and evacuation during milling with this Walter Tools insert, which helps maintain consistent surface finish and reduces the likelihood of built-up edge. What is the benefit of the 15° relief angle? A 15° relief reduces cutting forces and vibration, enabling smoother feeds and more stable cutting conditions when using the RDMT1605M0-D57 WPP35G insert. Can the round geometry be indexed multiple times? Yes; the round RDMT geometry permits multiple effective cutting positions, spreading wear and improving cost efficiency per insert edge. Is this insert suitable for general production or specialised applications? The combination of WPP35G grade and Tiger·tec Gold coating makes the insert versatile for general steel production work, offering a good compromise between tool life and surface quality. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT1605M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WSM35G grade delivers sustained edge stability and reduced tooling costs in demanding milling operations; the optimised D57 chipbreaker and 15° relief angle support consistent chip control and surface quality. Order genuine Walter Tools inserts or consult Metav Werkzeuge for tailored application advice. RDMT1605M0-D57 WSM35G indexable milling insert — Tiger·tec Gold, 15° relief (Walter Tools) RDMT1605M0-D57 WSM35G is an indexable milling insert designed for high-demand machining of stainless steels and heat-resistant alloys, offering robust performance where thermal and mechanical loads are high *Tiger·tec Gold coating for high wear resistance *Optimised chipbreaker D57 for stable chip control *Suitable for stainless steel and superalloys *Round 16 mm form for versatile milling Maximised cutting performance for difficult materials The combination of the WSM35G coated-carbide grade and the Tiger·tec Gold technology is engineered for machining materials that challenge conventional grades. As a coated carbide cutting solution, the insert offers enhanced resistance to thermal softening and abrasive wear, which translates into a longer tool life and fewer indexings. The specified grade is tailored for the ISO groups M and S, meaning rostfreier Stahl (stainless steel) and heat-resistant superalloys are processed with improved process security. This reduces unexpected downtime and supports steady production output. Reliable chip control and consistent surface finish The integrated chipbreaker D57 promotes controlled chip formation even under interrupted cuts, while the 15° relief angle maintains a stable cutting edge geometry. Together these design choices lower the risk of built-up edge and support a consistent surface quality on the workpiece. For shops requiring repeatable results, the engineered chip flow minimises rework and smoothing operations, delivering a measurable improvement in cycle-time stability and downstream processes. Geometry that supports flexible milling strategies The round 16 mm form and the insert’s rated geometry provide multiple engagement possibilities, making it suitable for light profiling as well as heavier shoulder milling where dependable edge strength is required. The round shape increases the number of available cutting positions per index, contributing to reduced tooling inventory and simplified logistics. As part of a modular tool system, the insert allows straightforward indexing and replacement, promoting efficient tool change routines and reduced machine idle time. Efficiency and cost-effectiveness in production By combining a wear-resistant coating with an insert geometry optimised for stable cutting, this grade helps lower cost per component through extended life and fewer tool changes. Fewer interventions on the machine mean higher net machining hours and improved overall equipment effectiveness. In many production scenarios, the balance of edge stability and wear resistance pays off via reduced downtime and lower consumable spend across medium to long production runs. Clear guidance for material compatibility This cutting grade and insert geometry are explicitly suitable for stainless steel and heat-resistant superalloys (ISO groups M and S). These materials typically demand thermal resilience and edge-holding capacity because they generate high cutting temperatures and tend to work-harden. Using a purpose-designed coated carbide reduces the tendency for rapid wear and supports predictable machining parameters in both roughing and finishing passes. Practical integration and technical support The insert is supplied in the standard RDMT form factor and fits toolholders engineered for this geometry, enabling quick adoption into existing tool families. For shops seeking parameter recommendations or confirmation of holder compatibility, technical consultations are available to adapt cutting speeds and feeds to specific setups. Integration of this insert into a standardised tooling inventory promotes repeatable set-ups and easier process documentation for quality assurance. Contact Metav Werkzeuge for application-specific recommendations and to arrange supply of genuine Walter Tools RDMT1605M0-D57 WSM35G milling inserts Technical data SKU: RDMT1605M0-D57-WSM35G-WALTER Label: Fräswendeschneidplatte RDMT1605M0-D57 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Grade: WSM35G Series: Tiger·tec Gold Facts Diameter: 16 mm Relief angle: 15° Thickness code: 05 Chipbreaker: D57 Tolerance class: M Execution: T Special features Coated carbide grade WSM35G (Tiger·tec Gold) Optimised chipbreaker D57 Round insert form Application: stainless steel (ISO M), heat‑resistant superalloys/titanium (ISO S) Designed for high thermal and mechanical load stability FAQ What materials is this insert best suited for? The RDMT1605M0-D57 WSM35G insert (Walter Tools) is optimised for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering improved edge stability under high temperatures. How does the D57 chipbreaker affect machining? The D57 chipbreaker on this insert supports controlled chip formation and evacuation, which enhances process stability and contributes to a more consistent surface finish during milling. Can this insert be used for finishing as well as roughing? Yes, the combination of the WSM35G grade and the Tiger·tec Gold coating provides sufficient wear resistance for both heavier roughing passes and controlled finishing, depending on the chosen cutting parameters. Is the relief angle important for performance? The 15° relief angle helps maintain a secure cutting edge under load, reducing built-up edge tendencies and improving surface integrity on demanding materials. How many cutting positions are available before indexing? The round insert form and RDMT geometry allow multiple indexing positions per insert, extending the usable life before replacement and simplifying inventory handling. Walter Tools; part of Walter AG; Tübingen, Germany; www.walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer (Walter Tools).
RDMT1605M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the versatile P / M / S grade to secure consistent edge stability and reliable chip control in demanding milling operations; the round 16 mm form with a 15° clearance and D57 chipbreaker helps maintain process stability and machining quality — order via Metav Werkzeuge or consult our specialists for application advice. RDMT1605M0-D57 WSP45G milling insert — round 16 mm, Tiger·tec Gold (Walter Tools) The RDMT1605M0-D57 WSP45G is a round milling insert designed for general and high-demand milling of steel, stainless steel and heat‑resistant alloys, combining a PVD-coated grade with a chipbreaker optimised for controlled swarf formation. Tiger·tec Gold PVD coating for stable edges Suitable for steel, stainless and superalloys Round 16 mm insert with 15° clearance D57 chipbreaker for consistent chip control High-performance coating and predictable cutting behaviour The insert combines the WSP45G grade within the Tiger·tec Gold series to provide a PVD-coated, wear-resistant surface that promotes stable cutting edges and extended tool life. The combination of coating and substrate hardness reduces adhesion and flank wear during the machining of tougher materials, which means fewer unplanned tool changes and more consistent component quality. The construction supports reliable cutting at elevated temperatures typical of steel and stainless steel machining, helping to keep cycle times predictable and processes repeatable. Versatile material capability with controlled swarf formation Specified for the ISO groups P / M / S, the insert is engineered to machine unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys (including titanium). The D57 chipbreaker geometry actively shapes swarf and assists in controlled evacuation during milling, which reduces the risk of entanglement and improves surface finish. The 15° clearance angle balances approach and flank contact to lower cutting forces in interrupted cuts, while the round form contributes to smooth engagement and even wear distribution across the cutting edge. Process benefits and workshop integration By using this insert in suitably clamped indexable cutter bodies, shops gain improved process stability and predictable reconditioning intervals. The round 16 mm format distributes cutting forces evenly, reducing sensitivity to small runout and enabling more consistent part tolerances. The grade’s toughness supports secure chip formation when machining materials prone to built-up edge, while the coating enhances resistance to abrasive wear — together delivering higher uptime and better overall productivity. For application advice or compatibility checks with existing tool holders, Metav Werkzeuge can provide specification support and practical recommendations. For robust, multi‑material milling with proven edge stability, request availability of the Walter Tools RDMT1605M0-D57 WSP45G milling insert from Metav Werkzeuge or contact our application specialists for tailored machining advice. Technical Data Article number: RDMT1605M0-D57-WSP45G-WALTER SKU: RDMT1605M0-D57-WSP45G-WALTER Designation: RDMT1605M0-D57 WSP45G Brand: Walter Tools Facts Insert size: 16 Clearance angle: 15° Plate thickness: 05 Tolerance class: M Shape: round Design & Features Coating: Tiger·tec Gold Grade: WSP45G Chipbreaker: D57 Material groups: P / M / S Series: Tiger‑tec Gold Execution: T ISO designation: RDMT1605M0-D57 WSP45G FAQ What materials can this insert machine effectively? The Walter Tools RDMT1605M0-D57 WSP45G milling insert is suitable for ISO groups P, M and S, meaning it is designed for steel, stainless steel and heat‑resistant superalloys. How does the D57 chipbreaker improve performance? The D57 chipbreaker shapes and controls swarf to enable consistent chip evacuation and improved surface quality when the RDMT1605M0-D57 WSP45G insert is used in compatible cutter bodies. Is the round form advantageous for interrupted cuts? Yes — the round 16 mm geometry helps distribute forces evenly and is more forgiving in cases of minor runout, offering smoother engagement and reduced risk of localised damage. What does the Tiger·tec Gold coating contribute? Tiger·tec Gold provides a PVD surface that enhances wear resistance and reduces adhesion, which contributes to longer edge life and more stable machining across a range of materials. Which cutter bodies accept the RDMT1605M0-D57 WSP45G designation? This insert follows the RDMT16... geometry and is intended for indexable milling cutters designed for round inserts of the same ISO designation and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT2006M0-D57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger-tec Silver coating, the wear-resistant WKP35S grade and the D57 chipbreaker geometry for consistently stable chip control and reduced tool changes. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. RDMT2006M0-D57 WKP35S – Milling indexable insert with Tiger-tec Silver, D57 chipbreaker | Walter Tools The RDMT2006M0-D57 WKP35S is a round milling indexable insert engineered for medium to heavy machining of steel and cast iron, featuring a 15° free angle and a D57 chipbreaker for reliable chip formation Tiger-tec Silver coating for increased wear resistance WKP35S grade tuned for steel and cast iron D57 chipbreaker for controlled chip formation Round 20 mm form for versatile milling applications High-performance coating and cutting grade for reliable productivity The combination of Tiger-tec Silver and the WKP35S cutting grade delivers a balanced performance that addresses the thermal and abrasive demands of ISO P and K materials. As a coated carbide solution, this insert is optimised for machining unalloyed and alloyed steel as well as cast iron, offering improved resistance to flank and crater wear compared with standard grades. The engineered coating reduces friction at the cutting edge, which translates into longer tool life, fewer interruptions for index changes and a lower cost per component in continuous production runs. Precision geometry for consistent chips and machining stability The D57 chipbreaker geometry, combined with the insert’s round 20 mm form and a 15° free angle, promotes predictable chip detachment and evacuation during intermittent or continuous cuts. This design supports stable cutting forces and reduces vibration across a range of feed rates, contributing to reproducible surface quality and dimensional control. Tolerance class M ensures that seating and repeatability in toolholders remain reliable, simplifying tool setting and reducing setup time in serial production. The overall geometry is thus tailored to deliver both process security and efficient material removal. Practical benefits for workshop integration and process optimisation Specifically shaped for demanding milling tasks, this indexable insert reduces downtime by extending the interval between indexing and replacements, while maintaining a consistent cutting edge for repetitive operations. The grade’s suitability for both steel and cast iron means fewer tool changes across mixed-production environments, boosting throughput and allowing shops to consolidate tooling inventory. If clarification is needed regarding compatibility with specific toolholders or machining parameters, Metav Werkzeuge provides application advice and supplementary technical data to align the insert with the intended process. Contact Metav Werkzeuge today to discuss the RDMT2006M0-D57 WKP35S insert, obtain tailored cutting data or arrange rapid supply; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RDMT2006M0-D57-WKP35S-WALTER Designation: RDMT2006M0-D57 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Insert form: round Insert size: 20 mm Thickness code: 06 Free angle: 15° Tolerance class: M Special features Coating: Tiger-tec Silver Material applicability: ISO P (steel), ISO K (cast iron) Chipbreaker: D57 Execution: T Material group: P / K FAQ What materials is this insert suitable for? The RDMT2006M0-D57 WKP35S insert is designed for ISO P and K materials, meaning it is suitable for machining various steels and cast iron. How does the Tiger-tec Silver coating affect tool life? The Tiger-tec Silver coating on the WKP35S grade reduces friction and wear at the cutting edge, extending service life and supporting stable machining performance. Which chip behaviour can be expected with the D57 geometry? The D57 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during interrupted cuts. Is this insert compatible with standard round insert toolholders? The round form and tolerance class M make the insert compatible with standard holders designed for a 20 mm round geometry; refer to holder specifications for seat dimensions. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the respective manufacturer (Walter Tools).
RDMT2006M0-D57 WPP35G Wendeplatten - Walter Tools
Achieve more productive steel machining with the combination of the Tiger·tec Gold coating and the WPP35G grade for durable cutting performance; the round chipformer and 15° clearance angle support reliable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. RDMT2006M0-D57 WPP35G milling indexable insert — round, Tiger·tec Gold, Walter Tools The RDMT2006M0-D57 WPP35G is a round milling indexable insert designed for high-performance machining of steel, combining a coated carbide grade with a D57 chipbreaker for stable chip formation. Tiger·tec Gold coated grade WPP35G Optimised for steel machining P group Round form with D57 chipbreaker 15° clearance for secure edge engagement Reliable cutting performance from advanced coating technology The combination of Tiger·tec Gold coating and a WPP35G carbide grade delivers a balance of wear resistance and toughness that reduces flank wear and extends interval between index changes. This coated carbide substrate enables consistent cutting forces in typical steel machining conditions, which translates into fewer interruptions and higher machine utilisation. The construction and coating technology are geared towards predictable tool life and steady performance across a range of steel alloys. Precision chip control and improved surface quality A purpose-designed D57 chipformer and the insert’s round geometry support controlled chip curl and evacuation, reducing the risk of built-up edge and surface damage. The 15° free angle helps maintain a stable cutting engagement, lowering vibration and promoting a uniform finish on workpieces. These characteristics are particularly beneficial in interrupted cuts and when working with long-chipping steels, where reliable chip control directly improves component quality. Productivity gains through process stability Tolerance class M and the insert’s engineered edge behaviour contribute to repeatable results and reduced scrap rates. Stable edge geometry and the coated grade combine to deliver measurable productivity benefits: longer intervals between index changes and fewer tool-related stoppages. The result is an insert that supports efficient production cycles while maintaining surface integrity—key for batch production and mixed-lot machining environments. Practical compatibility and application guidance The round insert with designation RDMT2006M0-D57 WPP35G is supplied in the Tiger-tec Gold series and is optimised for the ISO P material group (steel). Its nominal size and thickness make it suitable for a variety of milling cutter bodies that accept round inserts with D57 chipformers. Walter Tools’ product design emphasizes stable chip formation and broad material coverage, offering a tool solution that balances wear resistance with toughness for everyday workshop and industrial applications. Contact Metav Werkzeuge today for tailored application advice and to secure the RDMT2006M0-D57 WPP35G insert for your machining tasks. Email info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical guidance and ordering options. Technical data Article number: RDMT2006M0-D57-WPP35G-WALTER Product type: milling indexable insert Brand: Walter Tools Series: Tiger-tec Gold Core data Size: 20 Thickness: 06 Free angle: 15° Chipbreaker: D57 Tolerance class: M Special features Grade: WPP35G (coated carbide) Shape: round Material application: steel (P) Execution: T ISO designation: RDMT2006M0-D57 WPP35G FAQ What materials is this insert suitable for? The RDMT2006M0-D57 WPP35G insert is optimised for the ISO P material group and is intended primarily for machining steel. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold coating on the WPP35G grade improves wear resistance and heat management, which enhances tool life and maintains cutting-edge stability in steel machining. Which chipformer does this insert use and why is it important? This insert features a D57 chipbreaker; the D57 geometry is designed to control chip curl and evacuation, reducing built-up edge and helping to secure surface finish quality. Is the RDMT2006M0-D57 WPP35G compatible with a wide range of cutter bodies? The round form and standard ISO designation facilitate compatibility with milling cutters that accept RDMT-style round inserts; confirm seat and clamping details on the specific cutter body before assembly. SKU: RDMT2006M0-D57-WPP35G-WALTER What are the main advantages of choosing this Walter Tools insert? The insert offers a balance of wear resistance and toughness for reliable steel machining, consistent chip control via the D57 chipformer, and the process benefits associated with the Tiger·tec Gold series. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMT2006M0-D57 WSM35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G grade and a stable chipformer D57 for secure cutting of stainless steels and heat-resistant alloys; order the RDMT2006M0-D57 WSM35G milling insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. RDMT2006M0-D57 WSM35G — milling insert by Walter Tools (Tiger·tec Gold, for stainless steels and superalloys) RDMT2006M0-D57 WSM35G is a round milling insert designed for demanding finishing and roughing tasks in stainless steels and heat-resistant superalloys, featuring a 15° relief angle and a specialised chipformer D57 to promote stable chip control. Tiger·tec Gold coating for thermal stability Optimised chipformer D57 for consistent chips 15° relief angle for secure edge engagement Suitable for stainless steels and superalloys High-temperature resistance that stabilises machining The WSM35G grade, based on coated carbide technology within the Tiger·tec Gold family, is engineered to resist thermal and adhesive wear encountered when machining high-strength and heat-prone materials. This results in a stable cutting edge and reduced risk of built-up edge, which in turn extends tool life and helps maintain consistent surface quality. For operations where material stickiness and heat generation are primary concerns, the combination of grade and coating delivers measurable process reliability. Predictable chip control and improved surface quality A round insert geometry paired with the chipformer D57 promotes regular chip formation and evacuation, reducing the likelihood of entanglement in pocketed or interrupted cuts. The insert’s geometry supports a balanced cutting action that lowers vibration and delivers a more uniform finish on the workpiece. The design is particularly advantageous when machining stainless steel, where chip control directly influences both tool life and the final surface condition. Built for process security and repeatability The insert’s 15° relief angle and the M tolerance class aim to provide a predictable engagement with the workpiece, supporting repeatable positioning and stable cutting forces. The RDMT2006M0-D57 format is compatible with common milling toolholders and toolpaths used in modern CNC machining, offering straightforward integration into existing setups. This leads to reduced set-up variability and contributes to consistent production outputs over long runs. Application focus and practical benefits Intended primarily for machining rostfreiem Stahl (stainless steel) and heat-resistant superalloys such as titanium-based materials, the insert is suitable for both roughing under heavy loads and semi-finishing where edge security is critical. The coated carbide substrate and Tiger·tec Gold treatment help maintain a sharp, wear-resistant edge, enabling higher cutting parameters when process conditions allow. For precise selection of cutting data and holder compatibility, technical consultation is available to align the insert’s capabilities with the machining task. Contact Metav Werkzeuge today for supply and tailored machining advice on Walter Tools Tiger·tec Gold inserts and the RDMT2006M0-D57 WSM35G grade. Technical data Article number: RDMT2006M0-D57-WSM35G-WALTER Designation: RDMT2006M0-D57 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Dimensions & key specs Insert size designation: 20 Thickness designation: 06 Relief angle: 15° Chipformer: D57 Execution: T Tolerance class: M Materials & applications Suitable for: stainless steels (M) Suitable for: heat-resistant superalloys and titanium (S) Substrate: coated carbide Coating technology: Tiger·tec Gold Grade: WSM35G FAQ What materials is this insert suited for? The RDMT2006M0-D57 WSM35G milling insert is designed for stainless steels and heat-resistant superalloys, reflecting the WSM35G grade’s emphasis on thermal stability and edge integrity. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM35G grade enhances resistance to thermal and adhesive wear, improving tool life and helping to maintain a stable cutting edge during prolonged machining of tough materials. What role does the chipformer D57 play? The chipformer D57 promotes consistent chip breaking and evacuation, which reduces clogging and supports a better surface finish when using the RDMT2006M0-D57 insert in interrupted or continuous milling operations. Is the insert suitable for both roughing and finishing? Yes; depending on geometry and cutting data, the RDMT2006M0-D57 insert can be applied for robust roughing and semi-finishing, offering a balance between cutting-edge stability and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names belong to their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
RDMT2006M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating, the D57 chipbreaker and the 15° relief angle for consistent chip control and extended tool life; order the insert directly via Metav Werkzeuge or request advice from our consultants to match the insert to specific milling tasks. RDMT2006M0-D57 WSP45G — Milling insert, Tiger·tec Gold (15° relief) by Walter Tools The RDMT2006M0-D57 WSP45G is a round milling indexable insert designed for versatile slotting and face milling across Stahl, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and superalloys 15° relief angle for stable cutting Round form with D57 chipbreaker Proven wear resistance for high productivity The RDMT2006M0-D57 WSP45G benefits from the Tiger·tec Gold family: a PVD coating system engineered for wear resistance and prolonged edge life. This results in fewer tool changes and a steadier process on demanding series production. The coated cemented carbide substrate supports a reproducible cutting edge, which translates into measurable gains in productivity and lower total machining costs when processing steels and similar alloys. Reliable chip control and smoother surface finishes The combination of the D57 chipbreaker and the insert’s round form produces predictable chip segmentation and evacuation, reducing built-up edge and improving stability in interrupted cuts. The 15° relief angle contributes to a controlled cutting geometry that reduces cutting forces and promotes consistent surface finish quality. For applications that require repeatable chip formation, this geometry supports safer machining and less scrap. Broad material capability for fewer tool variants The cutting grade is specified for the ISO groups P, M and S, which means suitability for Stahl (unalloyed and alloyed steels), rostfreier Stahl (stainless steels) and heat-resistant superalloys or titanium. Each group has distinct machining challenges—from sticky chips in rostfreier Stahl to high-temperature loads in superalloys—and the WSP45G grade is tailored to provide stable cutting across these material classes, reducing the need for multiple specialised grades. Workshop integration and handling advantages With a nominal plate diameter of 20 mm, thickness code 06 and tolerance class M, the insert is compatible with common toolholders and repeatable clamping systems, supporting quick indexability and short setup times. The round format offers multiple cutting edges and forgiving entry behaviour, which helps when adapting to varying workpiece conditions. As a component from Walter Tools, the insert benefits from recognised engineering standards and consistent production quality, assisting in predictable process planning. For reliable, high-process milling choose the Walter Tools Tiger·tec Gold RDMT2006M0-D57 WSP45G insert — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: RDMT2006M0-D57-WSP45G-WALTER Item label: Fräswendeschneidplatte RDMT2006M0-D57 WSP45G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Execution: T Facts Plate diameter: 20 Thickness code: 06 Relief angle: 15° Tolerance class: M Special features Round plate form Chipbreaker: D57 Coating: Tiger·tec Gold (PVD) Material applicability: P / M / S FAQ What materials is this insert suited for? The RDMT2006M0-D57 WSP45G is formulated for ISO groups P, M and S, meaning it is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip segmentation and removal, improving stability and surface quality during milling operations. Why is the Tiger·tec Gold coating beneficial? The Tiger·tec Gold PVD system enhances wear resistance and edge stability, extending tool life and maintaining consistent cutting performance in series production. What does the tolerance class M indicate? Tolerance class M denotes a medium dimensional precision suitable for common industrial toolholders, enabling reliable repeatability and straightforward replacement. Is the round plate form advantageous for interrupted cuts? Yes. The round form offers a forgiving entry angle and multiple usable edges, which helps manage the stresses of interrupted milling and reduces the risk of edge chipping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by Metav Werkzeuge. The offered item is an original, factory-new product of the manufacturer.
RDMW0803M0T-A27 WKP35S W - Wendeplatten - Walter Tools
Take advantage of the combination of precision geometry, the Tiger‑tec Silver coating and proven WKP35S carbide for consistent machining of steel and cast iron; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. RDMW0803M0T-A27 WKP35S milling insert — round R08, 15° relief, Tiger‑tec Silver by Walter Tools RDMW0803M0T-A27 WKP35S is a round indexable milling insert designed for efficient roughing and semi‑finishing of steel and cast iron, featuring a coated carbide grade optimised for stable cutting performance. Tiger‑tec Silver coating for long tool life Optimised for steel and cast iron machining Round insert R08 with 15° relief angle Robust WKP35S coated carbide grade Higher metal removal rates with predictable performance The Tiger‑tec Silver coating combined with the WKP35S grade enables increased cutting speeds while maintaining edge stability. The coated carbide construction reduces flank wear and supports consistent tool life, which translates into fewer interruptions and higher throughput on production runs. For decision makers, this means improved process reliability and lower tooling-related downtime compared with uncoated or generic grades. Broad application range for mixed production batches Designed for the machining groups P and K, the insert handles a variety of unalloyed and alloyed steel grades as well as abrasive cast iron. The geometry and chipbreaker A27 were selected to cope with the typical heat generation and chip forms encountered in these materials. The designation relates directly to ISO material groups and signals that the grade is tuned to balance wear resistance and toughness for common industrial applications. Practical geometry that eases integration and regrind planning The round R08 form and the 15° relief angle provide a compact cutting edge and uniform load distribution, which is beneficial when slotting or peripheral milling with variable engagement. The standardised bore and insert size make the component straightforward to fit into compatible holders; this reduces setup complexity and supports repeatable results in machining centres. The low‑vibration behaviour contributes to surface quality and tool life extension. Reliability and economical use in daily production With a medium tolerance class and a focus on stable chip control, the insert supports repeatable production cycles. The coated carbide composition and the engineered chipbreaker lower the risk of premature edge failure in mixed‑material lots, helping to control overall tooling costs. For procurement and process engineers, the predictable wear behaviour means easier stock planning and fewer emergency purchases. Contact Metav Werkzeuge for expert advice on integrating Walter Tools Tiger‑tec Silver inserts into existing machining processes or to check stock availability and delivery options Technical data Article number: RDMW0803M0T-A27-WKP35S-WALTER Type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger‑tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Size: 08 (R08) Thickness: 03 Relief angle: 15° Tolerance class: M Special features Coating: Tiger‑tec Silver Carbide grade: WKP35S (coated carbide) Applicable materials: steel (P), cast iron (K) Chipbreaker: A27 Plate form: round Execution: W FAQ What materials is this insert suitable for? The RDMW0803M0T-A27 WKP35S insert from Walter Tools is specified for machining steel (P) and cast iron (K), offering a balance of wear resistance and toughness for these groups. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP35S grade reduces abrasive wear and improves thermal stability, which helps the insert maintain cutting edge integrity under increased speeds and temperatures. Is the round R08 geometry suitable for slotting operations? Yes, the round R08 form with a 15° relief angle provides uniform edge loading and vibration damping, making the insert a practical choice for both slotting and peripheral milling on compatible holders. Can this insert be used in automated production environments? The repeatable geometry and stable wear behaviour of the RDMW0803M0T-A27 WKP35S support consistent cycle times and predictable tool changes, making it suitable for automated machining centres. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
RDMW0803M0T-A27 WPP35G W - Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating and reliable chip control from the A27 chipformer ensure consistent performance in demanding milling operations. Order directly via Metav Werkzeuge or request tailored advice from our consultants to match the insert to specific machining tasks. RDMW0803M0T-A27 WPP35G milling insert — Tiger·tec Gold coated, 15° relief, Walter Tools RDMW0803M0T-A27 WPP35G is a round milling insert designed for general steel machining with a 15° relief angle for stable cutting and the Tiger·tec Gold coating for extended tool life Tiger·tec Gold coated for long wear life 15° relief angle for robust cutting edge A27 chipformer for steady chip control Round form, size 08 for versatile milling Prolonged tool life through advanced coating technology The combination of the Tiger·tec Gold coating and a coated carbide substrate provides enhanced resistance to abrasive and adhesive wear, extending service cycles in serial production. This insert is specified for the ISO group P, meaning it is optimised for machining Stahl where heat generation and chip formation demand a balanced grade. As a result, productive milling operations benefit from fewer tool changes and more predictable tool life, supporting efficient production planning and reduced machine downtime. Stable cutting and dependable chip control for steel applications A round geometry together with the A27 chipformer gives consistent chip breaking and evacuation during interrupted cuts and slotting. The 15° relief angle contributes to a strong cutting edge that tolerates moderate radial forces, useful when facing variable material batches. For applications in roughing and profile milling of Stahl, the geometry helps maintain surface integrity while minimising the risk of built-up edge, translating technical features into clear process reliability. Versatility and process security in everyday milling The insert’s round form and size designation enable flexible use across pocketing, shoulder milling and trochoidal strategies where a robust edge is preferred over aggressive chip thinning. The grade WPP35G, part of the Tiger·tec Gold family, is characterised by a balanced mix of wear resistance and toughness, supporting a wide range of cutting parameters. Integrating this insert into standard toolholders simplifies inventory management and ensures consistent component quality across runs. Practical selection guidance and application overview When selecting an insert for machining Stahl, consider the workpiece hardness, depth of cut and engagement type: the presented insert is best suited to operations favouring a durable edge over extreme shear performance. The round insert form reduces the need for exact radial indexing and helps maintain repeatable results in medium-duty milling. Where higher feed rates or specialised alloys are required, the choice of grade and cutting data should be validated; Metav Werkzeuge consultants can assist with parameter selection and optimisation. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange immediate delivery or technical consultation Technical Data Article number: RDMW0803M0T-A27-WPP35G-WALTER SKU: RDMW0803M0T-A27-WPP35G Product type: Fräswendeschneidplatte / milling insert Grade: WPP35G Series: Tiger-tec Gold Data Relief angle: 15° Plate size: 08 Plate thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Substrate: coated carbide Chipformer: A27 Shape: Round Material application: Stahl (ISO P) Execution: W FAQ What materials is this insert suitable for? The RDMW0803M0T-A27 WPP35G insert is formulated for machining Stahl (ISO group P), offering balanced wear resistance and toughness for a wide range of steel grades. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on the WPP35G grade improves abrasive wear resistance and thermal stability, which helps extend tool life and maintain consistent dimensional results over long runs. Which chipformer does this insert use and why is it relevant? This insert uses the A27 chipformer, which provides reliable chip control and evacuation for general milling operations, reducing the risk of clogging and improving surface quality. Is the round form advantageous for specific milling strategies? Yes, the round form offers flexibility for pocketing and shoulder milling where a robust, index-insensitive cutting edge improves process stability. Can Metav Werkzeuge provide cutting data for this insert? Metav Werkzeuge can supply recommended cutting parameters and application advice for this Walter Tools insert to match workpiece and machine conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMW10T3M0T-A27 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and versatile material capability to maintain steady machining cycles and reduce tool changes. Order the RDMW10T3M0T-A27 WKP35S insert directly via Metav Werkzeuge or ask our consultants if needed. RDMW10T3M0T-A27 WKP35S milling indexable insert — Tiger·tec Silver, A27 chipbreaker, Walter Tools The RDMW10T3M0T-A27 WKP35S is a round milling insert designed for efficient finishing and roughing in steel and cast iron applications Tiger·tec Silver coating for extended tool life Optimised for steel and cast iron machining A27 chipbreaker for reliable chip control Round 10 mm insert with 15° clearance Stable chip control for uninterrupted productivity The combination of the A27 chipbreaker and the WKP35S grade ensures consistent evacuation of chips during interrupted cuts, which reduces the risk of built-up edge and improves surface finish. This geometry is particularly effective when machining unalloyed and alloyed steel, where predictable chip formation lowers machining forces. The benefit is a more stable process with fewer unexpected interruptions and a reduced need for rework. High wear resistance for longer tool life Built on the Tiger·tec Silver coating technology, the insert offers enhanced resistance against abrasive wear and thermal influence. The coated carbide structure provides a durable cutting edge that tolerates typical heat generation when cutting steel and cast iron, resulting in longer production runs between indexings. Longer runtimes translate into lower tooling costs per component and more efficient use of machine time. Versatile performance across common workshop materials This indexable insert has been designed to cover the ISO material groups P and K, which means reliable performance on steel and cast iron workpieces. The combination of grade and chip control adapts to the short, often brittle chips produced when machining cast iron and to the continuous chips from many steel grades. Fewer insert variants are required in the tool drawer, simplifying inventory while maintaining process quality. Precision geometry that reduces setup and downtime The round insert form and the specified 15° relief angle provide predictable engagement and low vibration when clamped in suitable toolholders. The standardised size and the M tolerance class help ensure repeatable positioning in indexable milling cutters, which reduces setup iterations and minimises machine downtime. Clear, reliable positioning supports faster changeovers and steadier part quality. For machining operations that demand reproducible results and long tool life, contact Metav Werkzeuge to discuss the RDMW10T3M0T-A27 WKP35S and to find the optimal cutter body and machining parameters for the application Technical Data Article number: RDMW10T3M0T-A27-WKP35S-WALTER Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Shape: Round Size: 10 Thickness code: T3 Relief angle: 15° Chipbreaker: A27 Execution: W Tolerance class: M Applicable material groups: P / K Material: Coated carbide Facts Diameter designation: 10 mm Relief angle: 15° Thickness code: T3 Tolerance: M Special features Tiger·tec Silver coating technology WKP35S coated carbide grade Optimised for steel (P) and cast iron (K) A27 chipbreaker for controlled chip formation Round insert form for multi-directional cutting FAQ What materials is this insert suitable for? The RDMW10T3M0T-A27 WKP35S insert is suitable for ISO groups P and K, meaning it is intended primarily for steel and cast iron machining. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade increases wear resistance and thermal stability, allowing longer runtimes and more consistent tool performance when machining steel and cast iron. Is the A27 chipbreaker suitable for interrupted cuts? Yes, the A27 chipbreaker is engineered to manage chips reliably during interrupted and continuous cuts, improving process stability and surface quality. What size and geometry does the insert have? This is a round insert with a size designation of 10 and a relief angle of 15°, supplied in thickness code T3 and tolerance class M for consistent seating in compatible cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
RDMW10T3M0T-A27 WPP35G W - Wendeplatten - Walter Tools
Take advantage of the combination of high cutting performance, stable chip control and simple tool integration to keep machining processes predictable and productive. The coated carbide grade delivers durable edge life on steels while the A27 chipbreaker supports consistent chip flow. Order the inserts through Metav Werkzeuge or consult the technical team for application advice. RDMW10T3M0T-A27 WPP35G – Milling indexable insert, Tiger‑tec Gold, 15° clearance (Walter Tools) RDMW10T3M0T-A27 WPP35G is a round milling insert for steel machining, offering Tiger‑tec Gold coating and a 15° clearance angle for high-performance metalcutting. Tiger‑tec Gold coated, high cutting performance Optimised A27 chipbreaker for steel machining 15° clearance angle for stable cutting Round insert, size 10, T3 thickness Higher throughput for steel machining with coated carbide technology The Tiger‑tec Gold coating combined with the WPP35G grade provides a robust coated carbide solution tailored for ISO P applications. This composition is developed to control the typical heat and chip formation encountered when machining steel, resulting in longer effective tool life and fewer interruptions for index changes. The outcome is a measurable increase in productive machining time and lower unit costs per component when compared with uncoated alternatives. Predictable chip control and edge stability for consistent results The integrated A27 chipbreaker is optimised for steel cutting, promoting short, controlled chips that evacuate reliably from the cutting zone. In conjunction with the 15° clearance angle, the insert reduces rubbing and cutting forces, which stabilises the cutting process and improves repeatability. The round geometry and T3 plate thickness add rigidity at the insert seat, supporting steady material removal and consistent surface quality on machined parts. Simple integration into existing milling systems for process reliability Designed in the familiar insert form RDMW10T3M0T-A27, the component fits common indexable milling toolholders, enabling quick replacement and minimal setup changes. The tolerance class M ensures interchangeability and repeatable positioning in tooling bodies, so the productivity gains from the grade and geometry are realised without complex fixture modifications. For applications requiring tailored cutting data, Metav Werkzeuge can provide guidance on feeds and speeds to match the component geometry and workpiece batch size. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools inserts such as the RDMW10T3M0T-A27 WPP35G and arrange procurement or technical consulting via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RDMW10T3M0T-A27-WPP35G-WALTER Label: Fräswendeschneidplatte RDMW10T3M0T-A27 WPP35G Walter Tools SKU: RDMW10T3M0T-A27-WPP35G-WALTER Manufacturer: Walter Tools Series: Tiger‑tec Gold Designation: RDMW10T3M0T-A27 WPP35G Core technical data Clearance angle: 15° Plate shape: Round Plate size: 10 Plate thickness: T3 Chipbreaker: A27 Tolerance class: M Material grade: WPP35G (coated carbide) Special features Coating technology: Tiger‑tec Gold Suitable for ISO P (steel) machining Execution: W Stable chip formation, designed for steel processing Manufacturer: Walter Tools FAQ Is this insert suitable for machining steel? Yes. The RDMW10T3M0T-A27 WPP35G insert is optimised for ISO P materials and is intended specifically for machining various steels. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP35G grade improves wear resistance and heat tolerance, which extends effective cutting life during heavy or continuous steel machining. How does the A27 chipbreaker affect machining behaviour? The A27 chipbreaker produces short, controlled chips in steel cutting, improving chip evacuation and reducing the risk of recutting or workpiece damage. What does the 15° clearance angle mean for tool performance? A 15° clearance angle reduces rubbing on the flank face, lowering cutting forces and delivering a more stable cut with less heat generation at the edge. Are these inserts compatible with standard indexable milling holders? The RDMW10T3M0T-A27 form is a common indexable insert geometry; compatibility depends on the holder design, but the tolerance class M supports reliable seating and repeatable positioning. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; www.walter-tools.com Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMW1204M0T-A27 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP35S grade to secure consistent edge stability and efficient machining of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. RDMW1204M0T-A27 WKP35S — indexable milling insert (round, A27 chipbreaker) by Walter Tools The RDMW1204M0T-A27 WKP35S is an indexable milling insert engineered for productive finishing and semi‑finishing on steel and cast iron, combining a coated carbide substrate with a geometry optimised for controlled chip formation. Tiger‑tec Silver coated carbide grade WKP35S Optimised A27 chipbreaker for stable chips Suited to steel and cast iron machining Round 12 mm insert with 15° clearance Increased productivity through consistent edge life The combination of the Tiger‑tec Silver coating and the WKP35S grade provides a durable, wear‑resistant cutting edge that supports longer tool life and stable performance under varying cutting conditions. The coated carbide composition reduces flank wear and improves thermal resistance, which translates into fewer indexings and reduced tool change time. For manufacturing operations targeting repeatable cycle times, this insert delivers measurable gains in throughput by maintaining cutting geometry and limiting unexpected downtime. Improved chip control and surface quality for reliable finishing The A27 chipbreaker and the round insert form ensure predictable chip breaking and evacuation when machining ISO groups P and K (steel and cast iron). The 15° clearance reduces rubbing at the flank while maintaining a secure cutting edge engagement; this helps achieve a consistent surface finish and lowers the risk of built‑up edge. Controlled chip formation reduces the likelihood of surface damage and protects the workpiece, especially in mixed production batches where material variability can affect process stability. Easy integration and process security for workshop routines With a nominal 12 mm diameter and a thickness corresponding to the “04” specification, the insert fits standard round seat milling cutters and is available in tolerance class M for predictable seating accuracy. The combination of geometry and coating makes it suitable for a wide range of operations from light finishing to more aggressive semi‑finish passes. Process planners benefit from reduced set‑up sensitivity and simpler tool inventory, while operators gain confidence from a broadly applicable insert that supports both productivity and repeatability. Discuss application requirements with Metav Werkzeuge for Walter Tools Tiger‑tec Silver inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RDMW1204M0T-A27-WKP35S-WALTER SKU: RDMW1204M0T-A27-WKP35S-WALTER Designation: RDMW1204M0T-A27 Product type: Indexable milling insert (round) Series: Tiger‑tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Insert size: 12 mm Thickness: 04 Clearance angle: 15° Chipbreaker: A27 Tolerance class: M Execution: W Special features Coating: Tiger‑tec Silver (coated carbide) Shape: Round Material suitability: Steel (P) and cast iron (K) per ISO 513 Application: Finishing and semi‑finishing operations Material label: P / K FAQ What materials is this insert intended for? The RDMW1204M0T-A27 WKP35S is specified for steel and cast iron machining (ISO groups P and K) and the WKP35S grade is tuned for typical wear mechanisms in these groups. How does the A27 chipbreaker influence performance? The A27 chipbreaker promotes short, manageable chips and enhances evacuation in interrupted cuts, improving process security and surface quality when using the round insert geometry. What does the 15° clearance achieve in practice? A 15° clearance reduces flank contact and heat transfer to the cutting edge, which helps maintain edge integrity and supports consistent surface finishes over extended tool life. Is the insert compatible with standard round‑seat milling cutters? Yes, the round form with a 12 mm nominal size and tolerance class M is intended for standard round‑seat toolholders matching the RDMW designation. Which proprietary technology is used for the coating? This insert uses the Tiger‑tec Silver coating technology to provide enhanced thermal resistance and wear protection on a coated carbide substrate. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
RDMW1204M0T-A27 WPP35G W - Wendeplatten - Walter Tools
Take advantage of a high-performance coated carbide grade and a robust chipbreaker geometry to achieve consistent steel machining; the combination of Tiger‑tec Gold technology and a 15° clearance angle delivers reliable tool life and process stability. Order the inserts directly via Metav Werkzeuge or consult our specialists for application support. RDMW1204M0T-A27 WPP35G — round milling indexable insert, 15° clearance (Walter Tools) The RDMW1204M0T-A27 WPP35G is a round milling insert engineered for efficient steel machining in general-purpose and finishing operations, combining a balanced coating philosophy with a dedicated chip‑control geometry. Tiger‑tec Gold coating technology Optimised for steel (ISO P) 15° clearance for reliable chip flow Round 12 mm insert with A27 chipbreaker Optimised performance for steel machining The insert uses WPP35G, a coated carbide grade from the Tiger‑tec Gold series, developed specifically for machining steel (ISO P). This grade offers a purposeful balance between wear resistance and toughness, enabling stable cutting under variable conditions. The A27 chipbreaker supports reproducible chip formation and evacuation, reducing heat concentration at the cutting edge and helping to maintain dimensional consistency across medium‑duty feeds and speeds. Geometry and tooling advantages for productive cycles Round insert geometry provides high load distribution and is particularly forgiving in interrupted cuts or when tool path variations occur. The 15° clearance angle lowers contact on the flank face, reducing rubbing and enabling smoother engagement at the workpiece. Combined with the insert’s 12 mm nominal size and 4 mm plate thickness, the geometry is well suited to pocketing and light shoulder milling where consistent surface quality and tool life are priorities. Practical benefits and process reliability Using the coated grade together with the A27 chipbreaker leads to fewer tool changes and more predictable component output. The coating type reduces adhesion and abrasion, extending the interval between index changes; at the same time, the insert’s construction supports reliable repeatability in batch production. For shops seeking steady throughput and reduced setup overhead, this insert contributes to lower lifecycle machining costs and improved uptime. Application guidance and compatibility pointers The insert is designated for standard toolholders that accept the RDMW‑series round inserts; its tolerance class M ensures consistent fit and performance in compatible cutters. While optimised for steels, the grade is intended for typical P‑group applications—unalloyed and alloyed steels—where thermal and chip‑forming characteristics are those most commonly encountered during finishing and medium‑duty roughing. For specific holder compatibility or machining parameters, please consult Metav Werkzeuge’s technical advisers. Contact Metav Werkzeuge for application advice, stock availability and tailored recommendations for Walter Tools RDMW1204M0T-A27 WPP35G inserts Technical data SKU: RDMW1204M0T-A27-WPP35G-WALTER Article: RDMW1204M0T-A27 WPP35G Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Gold Core specifications Insert shape: Round Nominal size: 12 mm Thickness: 4 mm Clearance angle: 15° Chipbreaker: A27 Tolerance class: M Materials & features Grade: WPP35G Coating/technology: Tiger‑tec Gold Substrate: Coated carbide Application group: ISO P (steel) Execution: W FAQ Is this insert suitable for stainless steel? No. The insert is specified for ISO P applications and is optimised for steel; it is not designated for stainless (rostfreier Stahl) machining. What machining tasks does this grade suit best? The WPP35G grade is intended for general steel machining, offering a balance of wear resistance and toughness for finishing and medium‑duty operations with reliable chip control. Will the insert fit standard RDMW‑style toolholders? The RDMW1204M0T‑A27 geometry is compatible with toolholders designed for RDMW round inserts; tolerance class M supports consistent seating in suitable cutters. How does the A27 chipbreaker affect productivity? The A27 chipbreaker promotes controlled chip formation and evacuation, reducing heat build‑up and enabling longer, more predictable tool life in steel machining. Can Metav Werkzeuge provide cutting data for this insert? Yes. Metav Werkzeuge’s consultants can recommend cutting parameters and holder recommendations for the Walter Tools RDMW1204M0T‑A27 WPP35G insert based on the specific application. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMW1605M0T-A27 WKP25S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating and the WKP25S grade ensures durable, stable performance and excellent chip control when machining steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. RDMW1605M0T-A27 WKP25S — Round milling indexable insert, A27 chipbreaker, Tiger‑tec Silver by Walter Tools A high‑performance RDMW1605M0T-A27 WKP25S milling indexable insert developed for versatile, productive machining of steel and cast iron in series production and jobbing environments Tiger‑tec Silver coating technology Designed for steel and cast iron machining Round 16 mm insert with A27 chipbreaker Consistent machining quality for steel and cast iron The combination of the WKP25S grade and the Tiger‑tec Silver coating delivers controlled wear behaviour under the thermal and mechanical loads typical of steel (P) and cast iron (K) machining. The cutting material is coated carbide, which balances toughness and hardness to resist abrasive wear while maintaining a stable cutting edge. This results in fewer tool changes, predictable component tolerances and more consistent surface finish across long production runs, which supports higher throughput and reduced downtime. Long tool life through advanced coating and grade The Tiger‑tec Silver finish reduces friction at the cutting zone and improves heat resistance, extending the service life of the insert compared with uncoated grades. The WKP25S grade is tuned for typical chip formation in steel and for the abrasive nature of cast iron, so the insert sustains edge integrity under interrupted cuts and varying feed conditions. For shops seeking cost‑effective, repeatable results, this combination means fewer insert changes and lower per‑part tooling costs. Efficient chip control with the A27 geometry The A27 chipbreaker geometry is optimised to produce short, controllable chips when milling a wide range of steels and cast irons. The round, indexable configuration enables multiple cutting edges per insert and flexibility in entering and leaving interrupted cuts. Improved chip control reduces the risk of chip packing and minimises rework, while the round insert form gives smooth engagement and predictable cutting forces in radial and axial milling operations. Practical integration into production workflows The insert’s round form and compact 16 mm size enable use in compact milling heads and modular tooling systems; the 15° relief angle supports secure edge engagement and reduces built‑up edge formation. Specifying this insert in process planning supports stable machine loads and predictable tool life, which simplifies planning for inserts per shift and helps to achieve consistent component quality. For integration questions or cutting parameter recommendations, application data from the manufacturer and practical shop trials are advisable. For tailored advice on using Tiger‑tec Silver inserts in specific materials or to place an order, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants can provide cutting data and application support. Technical data Article number: RDMW1605M0T-A27-WKP25S-WALTER Article designation: RDMW1605M0T-A27 ISO designation: RDMW1605M0T-A27 WKP25S Brand: Walter Tools Product type: milling indexable insert Facts Diameter: 16 Relief angle: 15° Thickness: 05 Tolerance class: M Execution: W Special features Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: A27 Shape: round Material application: P (steel), K (cast iron) Coated carbide FAQ What materials is this insert suitable for? The RDMW1605M0T-A27 WKP25S insert is designed primarily for machining steel (P) and cast iron (K) in accordance with ISO material groupings. What does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating on the WKP25S grade reduces friction and improves heat resistance, resulting in longer tool life and more consistent performance in steel and cast iron applications. How does the A27 chipbreaker help in milling? The A27 geometry yields short, controllable chips and supports stable cutting in interrupted cuts, reducing chip entanglement and improving process reliability with the round insert form. Can this insert be indexed to use multiple cutting edges? Yes, the round form and indexable design of the RDMW1605M0T-A27 allow multiple orientations to be used, extending effective tool life and reducing tooling costs. Where can cutting data or application support be obtained? Application‑specific cutting data and process recommendations are available through Metav Werkzeuge; their consultants can advise on feeds, speeds and suitable toolholders for the WKP25S grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com