RDMW1605M0T-A27 WKP35G W - Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and the WKP35G grade for stable edge life and broad material coverage; the round insert geometry and A27 chipbreaker ensure controlled chip formation and predictable machining results. Order the insert directly via Metav Werkzeuge or consult the team for cutting data and application guidance. RDMW1605M0T-A27 WKP35G indexable milling insert — Tiger‑tec Gold, for steel & cast iron (Walter Tools) RDMW1605M0T-A27 WKP35G is an indexable milling insert designed to deliver consistent performance in demanding steel and cast‑iron applications, combining a specialised grade with a round geometry for stable contact and chip control Tiger‑tec Gold coated carbide grade WKP35G Optimised for steel and cast iron machining Round form, 16 mm diameter, 15° relief angle Chipbreaker A27 for controlled chip form Consistent machining performance for production environments The combination of a coated carbide grade and the Tiger‑tec Gold technology provides a balance between wear resistance and toughness. This results in predictable tool life and stable cutting behaviour when machining unalloyed and alloyed steel as well as cast iron, covering the ISO P and K groups. The moderate 15° relief angle supports reliable edge engagement in interrupted cuts and reduces the risk of premature chipping, which translates into fewer tool changes and improved process uptime. Emphasis on measurable, repeatable performance helps planning in batch production and mixed‑lot workshops. Coating and chip control that support productivity The Tiger‑tec Gold treatment on the WKP35G grade reduces abrasive and adhesion wear while maintaining a strong cutting edge; this means the insert sustains performance under higher heat and mechanical loads. The A27 chipbreaker is designed to produce short, consistent chips in the stated materials, lowering the likelihood of threading or tangling and improving evacuation. For practical use, the coated surface lowers friction and can improve surface finish; in short runs or larger production volumes this contributes to a better cost‑per‑cut metric and fewer interruptions for chip management. Geometry and tolerance for stable toolset integration The round insert form and designation code reflect a compact, indexable geometry that promotes uniform load distribution and stable contact with the workpiece. The size code 16 and thickness code 05 are industry‑standard references for toolholders that accept this family; the tolerance class M ensures interchangeability across compatible tool systems and predictable assembly. These geometric characteristics—combined with the WKP35G grade—support consistent results in face milling and light shoulder operations. The RDMW1605M0T‑A27 WKP35G insert is particularly useful where repeatable surface finish and controlled chip formation are part of the process specification. Contact Metav Werkzeuge for tailored application advice on Walter Tools indexable inserts or request detailed cutting data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: RDMW1605M0T-A27-WKP35G-WALTER Designation: RDMW1605M0T-A27 WKP35G Brand: Walter Tools Series: Tiger‑tec Gold Facts Plate size: 16 Thickness code: 05 Relief angle: 15° Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Grade: WKP35G Chipbreaker: A27 Application: Steel (P) and Cast iron (K) Insert form: Round Execution: W FAQ Which materials is this insert suitable for? The RDMW1605M0T‑A27 WKP35G insert from Walter Tools is specified for ISO groups P (steel) and K (cast iron), with the WKP35G grade tailored to these materials. How does the Tiger‑tec Gold coating affect machining? Tiger‑tec Gold on the WKP35G grade improves resistance to abrasive and thermal wear, which enhances tool life and supports consistent surface quality when cutting steel and cast iron. What is the effect of the A27 chipbreaker? The A27 chipbreaker on the RDMW1605M0T‑A27 promotes short, controllable chips in the intended materials, improving evacuation and reducing chip interference during milling. Is the round form beneficial for interrupted cuts? Yes, the round insert geometry provides a robust cutting edge and even distribution of cutting forces, which is advantageous in interrupted cuts and when stable edge life is required. What does tolerance class M mean for tool setup? Tolerance class M indicates medium interchangeability precision, ensuring reliable seating and repeatable positioning in compatible toolholders for this insert type. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
RDMW1605M0T-A27 WKP35S Wendeplatten - Walter Tools
Built for process-stable milling of demanding workpieces, the RDMW1605M0T-A27 WKP35S pairs Tiger·tec Silver coating with an A27 chipbreaker to improve tool life and chip control; order via Metav Werkzeuge or request application advice from our specialists. RDMW1605M0T-A27 WKP35S milling insert, Tiger·tec Silver, Walter Tools A RDMW1605M0T-A27 WKP35S round milling insert designed for versatile machining of Stahl and cast iron with a 15° clearance for reliable chip formation Tiger·tec Silver coating for wear resistance WKP35S grade for Stahl and cast iron 15° clearance for reliable chip flow Round form Ø16 mm for versatile milling Higher productivity through targeted wear control The combination of Tiger·tec Silver coating and the WKP35S grade delivers consistent performance in demanding interrupted and continuous cuts. The coating reduces abrasive wear on the cutting edge, which translates into longer tool life and fewer index changes — a clear productivity gain for series production. The A27 chipbreaker is designed to control chip shape during machining of Stahl and cast iron, reducing built-up edge and helping to maintain surface finish. For process planning, the insert’s geometry supports steady feed rates with predictable tool-change intervals, which makes machining cycles more economical and easier to schedule. Robust cutting geometry for repeatable results The round form with Ø16 mm and the specified plate thickness (05) provide stable support in the pocket and allow secure clamping forces to be used without compromising edge integrity. The 15° clearance improves chip evacuation and reduces friction between the flank face and the workpiece, which helps to limit thermal loading at the cutting zone. In practice, this leads to improved dimensional stability and repeatable component tolerances. For shops aiming for consistent part quality, the insert’s geometry helps to reduce rework and rejects while maintaining cycle times. Application guidance and machining benefits Designed primarily for machining Stahl and cast iron, the WKP35S grade is optimised for the typical heat and chip characteristics of these materials. The coated carbide substrate tolerates the mixed demands of abrasive and adhesive wear encountered when cutting cast iron and alloyed Stahl. Use moderate cutting speeds and appropriate coolant strategies for best results with the A27 chipbreaker; this encourages short, controllable chips and reduces the risk of chip entanglement. Where surface finish and tool life are prioritised, the insert’s balanced design supports a reliable compromise between productivity and finish quality. For process-consistent milling with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: RDMW1605M0T-A27-WKP35S-WALTER Name: RDMW1605M0T-A27 WKP35S Type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 16 Plate thickness: 05 Clearance angle: 15° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: A27 Form: Round Material suitability: Stahl, cast iron FAQ What materials is this insert suitable for? The RDMW1605M0T-A27 WKP35S is specified for machining Stahl and cast iron; the WKP35S grade and Tiger·tec Silver coating are optimised for those material groups. What is the clearance angle and why does it matter? This insert features a 15° clearance angle, which aids chip flow and reduces flank contact, improving edge life and surface stability during milling. What are the dimensional specifics of the insert? The insert is a round form with Ø16 mm and a plate thickness designated as 05, intended for secure clamping and stable cutting performance. How does the A27 chipbreaker affect machining? The A27 chipbreaker produces short, controlled chips in interrupted and continuous cuts, enhancing chip evacuation and supporting consistent surface quality with less risk of built-up edge. Is the insert recommended for rostfreier Stahl (stainless steel)? No specific data is provided for rostfreier Stahl; the RDMW1605M0T-A27 WKP35S is described for Stahl and cast iron applications rather than rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the global precision tooling community. Walter Tools is cited here as the manufacturer of the above original factory-new product. Protected trademarks and brand names remain the property of their respective owners. Mark names are used exclusively for explanation and identification purposes.
RDMW1605M0T-A27 WPP35G W - Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, reliable WPP35G carbide grade and a 15° relief angle for efficient steel machining and consistent tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. RDMW1605M0T-A27 WPP35G round milling insert — Tiger·tec Gold, for steel, Walter Tools RDMW1605M0T-A27 WPP35G is a round indexable milling insert designed for versatile steel machining applications, offering a balanced mix of wear resistance and toughness for stable production performance. Tiger·tec Gold coating for longer tool life Optimised A27 chipbreaker for steel machining Round insert Ø16 for reduced radial cutting forces 15° relief angle for controlled cutting action Improved productivity for steel machining The Tiger·tec Gold coating combined with the WPP35G grade delivers a measurable improvement in wear resistance while maintaining toughness where interrupted cuts or varying loads occur. Designed for machining steel, the insert supports typical heat and chip-formation conditions encountered in serial production. The A27 chipbreaker is optimised to produce short to medium chips in steel, reducing build-up and downtime. This translates into more consistent cycle times and less frequent tool changes, which benefits throughput and process stability. Predictable surface quality and chip control A round insert geometry with a Ø16 format and a 15° relief angle offers smooth engagement and reduced cutting forces, which helps to lower vibration and enhance surface finish. The combination of geometry and the coated carbide substrate enables stable chip flow even under moderate depths of cut. For operators new to coated grades, the coating provides thermal protection while the substrate maintains edge strength; this balance explains why the insert is recommended for a broad range of steel grades according to ISO P classifications. Reliable tolerance and mounting for series production Manufactured to tolerance class M, the insert provides repeatable seating and consistent radial run-out when mounted in compatible cutters, contributing to predictable part tolerances. The 0.5 thickness designation and round form minimise stress concentrations and make the cutting edge more forgiving in mixed production batches. For process engineers, this means easier tool-indexing and reduced scrap rates when the insert is used within the recommended machining parameters. For machining applications that demand reliable performance in steel, choose the Walter Tools Tiger·tec Gold inserts and contact Metav Werkzeuge for tailored recommendations — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: RDMW1605M0T-A27-WPP35G-WALTER Product: Round milling insert, indexable Manufacturer: Walter Tools Core data Grade/Sort: WPP35G Series: Tiger·tec Gold Form/Shape: Round, Ø16 Relief angle: 15° Chipbreaker: A27 Thickness: 0.5 Tolerance class: M Material designation: P (steel) Special features Coating: Tiger·tec Gold (coated carbide) Application: Optimised for steel (ISO P) Characteristics: Balanced wear resistance and toughness Geometry benefit: Reduced radial cutting forces for stability FAQ What materials is this insert intended for? The insert is specified for steel machining (ISO P); the WPP35G grade and Tiger·tec Gold coating are tuned to handle typical steel chip formation and thermal loads. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold provides thermal and wear protection that extends service life of the WPP35G insert under standard steel cutting conditions, improving consistency between index changes. What is the significance of the A27 chipbreaker? The A27 chipbreaker is designed to produce controllable short to medium chips in steel, aiding chip evacuation and reducing the risk of chip entanglement during milling. Is this insert suitable for interrupted cuts? Yes, the combination of a tough substrate and the Tiger·tec Gold coating makes this insert capable of handling interrupted cuts typical in many milling operations. Which tolerance class does the insert comply with and why it matters? The insert is made to tolerance class M, which supports precise seating and repeatable run-out characteristics in standard cutter bodies, beneficial for series production. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mention of brand names such as Walter Tools serves explanatory purposes only and does not imply any affiliation. The offered article is an original, factory-new product of the manufacturer.
RDMW2006M0T-A27 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP25S grade for consistently productive milling of steel and cast iron; the A27 chipbreaker and round form ensure reliable chip control and reduced downtime. Order directly via Metav Werkzeuge or contact our specialists for application advice. RDMW2006M0T-A27 WKP25S Milling Indexable Insert — Tiger·tec Silver for Steel & Cast Iron (Walter Tools) The RDMW2006M0T-A27 WKP25S is a round milling indexable insert engineered for high-productivity finishing and roughing of steel and cast iron components in industrial machining applications Tiger·tec Silver coating for extended tool life Optimised A27 chipbreaker for consistent chips Round 20 form with 15° clearance for versatile milling Grade WKP25S for steel and cast iron machining Maximise machining uptime with consistent chip control The Tiger·tec Silver technology delivers a durable, coated carbide surface that resists abrasive wear and heat, resulting in extended tool life and fewer tool changes. Combined with the A27 chipbreaker, the insert promotes stable chip formation, which lowers the risk of built-up edge and improves process reliability. For production environments where cycle time and reproducibility matter, these features translate into predictable performance and less unplanned downtime. Versatile performance across steel and cast iron applications Designed for the ISO groups P and K, this cutting grade WKP25S is tuned to the thermal and mechanical demands of steel and cast iron. The round form factor and 15° clearance allow flexible engagement geometries and smooth transitions between finishing and semi-finishing passes. This adaptability reduces the need for frequent insert changes, supporting more efficient tool planning and a streamlined machining process. Predictable integration and robust specifications for workshop use The insert’s specification—round form, plate size 20 and plate thickness 06 with tolerance class M—supports consistent seating and repeatability in standard milling cutters. The medium tolerance ensures a reliable fit, while the round geometry simplifies indexable orientations for balanced cutting forces. Together, these attributes make the component easy to integrate into existing tool systems and help maintain surface quality across batch runs. Discuss Walter Tools' Tiger·tec Silver solutions with Metav Werkzeuge — contact our product consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to verify suitability and availability Technical Data Article number: RDMW2006M0T-A27-WKP25S-WALTER Product designation: RDMW2006M0T-A27 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Core dimensions / measurable data Plate size: 20 Plate thickness: 06 Relief angle: 15° Tolerance class: M Materials & special features Grade: WKP25S Coating/technology: Tiger·tec Silver Chipbreaker: A27 Shape: Round Material applicability: P / K Execution: W FAQ What materials is this insert suitable for? The RDMW2006M0T-A27 WKP25S insert from Walter Tools is suitable for machining steel (P) and cast iron (K), matching its WKP25S grade and Tiger·tec Silver technology. What is the purpose of the A27 chipbreaker? The A27 chipbreaker is designed to produce consistent, controllable chips with the listed insert geometry, reducing the likelihood of chip-related interruptions when using the RDMW2006M0T-A27 WKP25S. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver enhances wear resistance and heat protection of the carbide substrate, which improves tool life and process stability for Walter Tools milling inserts under industrial machining loads. What does the round form and 15° clearance mean for my operations? The round form and 15° clearance offer flexible engagement angles and balanced cutting forces, supporting both finishing and semi-finishing passes with stable results using the RDMW2006M0T-A27 WKP25S. Is the insert compatible with standard milling cutter bodies? The insert’s tolerance class M and standard plate dimensions allow predictable seating in common indexable milling cutter bodies, facilitating straightforward integration into current tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from Walter Tools.
RDMW2006M0T-A27 WKP35G W - Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance, the WKP35G grade and a 15° relief angle for reliable chip control and extended tool life; the round 20 mm form ensures versatile milling in mixed production runs. Order the insert via Metav Werkzeuge or consult our specialists for process-matching recommendations. RDMW2006M0T-A27 WKP35G milling insert — round 20 mm, 15° relief, Tiger‑tec Gold (Walter Tools) A RDMW2006M0T-A27 WKP35G insert designed for productive milling of steel and cast iron, combining a coated carbide grade with a dedicated chipformer for stable cutting. Tiger‑tec Gold coating for long tool life Suitable for steel and cast iron 15° relief angle for stable cutting Round 20 mm form for versatile milling Increase uptime with Tiger‑tec Gold wear resistance The Tiger‑tec Gold technology delivers a coating system engineered for stable edge retention and predictable wear behaviour. This translates into fewer tool changes and more continuous machining time, reducing non-productive intervals on the shop floor. The WKP35G grade is a coated carbide formulation optimised for the thermal and mechanical conditions encountered when machining steels and cast irons, providing a clear efficiency gain for batch and series production. Consistent chip control for reliable surface quality With the integrated A27 chipbreaker and a 15° relief angle, the geometry promotes short, controllable chips and a steady cutting action. That results in improved surface finish and reduced risk of chip-related interruptions. The round insert geometry further aids radial engagement and smooth entry at varying immersion depths, helping to maintain dimensional consistency across components made from unalloyed and alloyed steel or cast iron. Versatility and predictable performance in mixed production The round 20 mm form factor offers flexibility for trochoidal, ramp and contour milling strategies where tool strength and stability are essential. The insert’s coated carbide base, noted for abrasion resistance, supports use across a range of catalogue-dependent applications. Combined with the insert’s tolerance class M, this provides repeatable positioning and secure clamping in standardized tool holders for consistent process results. Practical benefits and integration into the workflow Selecting this insert contributes to a lower total machining cost through extended edge life and dependable chip behaviour. The format and grade are suitable for straightforward integration into existing milling setups, enabling quick optimisation of cutting parameters without extensive trial runs. For specialised applications or material combinations beyond steel and cast iron, process advice can be provided to align cutting data with the WKP35G characteristics. Contact Metav Werkzeuge today for application-specific cutting data and fast availability of the RDMW2006M0T-A27 WKP35G from Walter Tools Technical Data Article number: RDMW2006M0T-A27-WKP35G-WALTER Designation: RDMW2006M0T-A27 WKP35G Manufacturer: Walter Tools Product type: Milling insert Facts Relief angle: 15° Insert form: Round Size: 20 Thickness: 06 Chipbreaker: A27 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G Substrate: coated carbide (beschichtetes Hartmetall) Material applicability: Steel (P) and Cast iron (K) Execution: W FAQ What materials is this insert suited for? The RDMW2006M0T-A27 WKP35G from Walter Tools is designed primarily for steel and cast iron machining in accordance with the grade’s intended material groups. How does the A27 chipbreaker affect machining? The A27 chipformer promotes short, controllable chips and steady cutting action, improving surface finish and reducing chip‑related interruptions during milling. Is the insert compatible with standard round insert holders? Yes, the round 20 form factor and tolerance class M enable secure clamping in standard tool holders designed for R‑type round milling inserts. What process benefits does the Tiger‑tec Gold series provide? Tiger‑tec Gold enhances edge stability and wear resistance, resulting in longer edge life and fewer tool changes for continuous production environments. Can the insert be used for profile and slot milling operations? The round geometry and robust grade make it suitable for a variety of milling operations, including profiling and trochoidal strategies, where stable cutting and chip control are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; no affiliation or endorsement by the mentioned manufacturers is implied.
RDMW2006M0T-A27 WKP35S Wendeplatten - Walter Tools
High wear resistance and stable chip control are combined in the Tiger·tec Silver grade and the WKP35S cutting material, delivering consistent performance when machining steel and cast iron. Order the RDMW2006M0T-A27 WKP35S directly via Metav Werkzeuge or consult our technical team for application-specific advice. RDMW2006M0T-A27 WKP35S – Milling Insert for Steel & Cast Iron | Walter Tools The RDMW2006M0T-A27 WKP35S is a round milling insert designed for productive and repeatable finishing and roughing of steel and cast iron components High-performance Tiger·tec Silver coating Suitable for Steel (P) and Cast Iron (K) 15° clearance angle for stable cutting Round 20 mm form, thickness 06 Maximum productivity through advanced grade and coating The combination of the Tiger·tec Silver series and the WKP35S grade provides high resistance to abrasive wear and stable cutting-edge behaviour. As a coated carbide solution, this insert balances toughness and hardness to resist attrition during interrupted and continuous cuts. For practical terms: the coating reduces flank wear and the substrate maintains edge stability, which together extend tool life and reduce downtime. This results in a measurable productivity advantage for batch production and longer tool-change intervals. Geometry engineered for reliable chip control and repeatability The insert’s round 20 mm form paired with the A27 chipbreaker design ensures predictable chip control, especially when machining materials prone to short or brittle chips. The 15° clearance angle gives a secure cutting engagement, while the thickness 06 and tolerance class M support consistent seating in standard toolholders. These geometric choices reduce vibration and promote repeatable surface results, simplifying process setup for series production and helping maintain dimensional consistency across parts. Clear application range and handling recommendations Specifically optimised for the ISO material groups P (steel) and K (cast iron), the insert is suitable for unalloyed and alloyed steels as well as abrasive cast materials. The WKP35S grade is tuned to the heat and chip-formation characteristics typical of these groups, delivering balanced wear performance and secure chip formation. For integrators and workshop planners, the indexable design allows fast replacement without regrinding; the round shape affords multi-edge utilisation where applicable, making it an efficient choice for mixed-production environments. For reliable, high-productivity milling with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored recommendations or to place an order – info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: RDMW2006M0T-A27-WKP35S-WALTER Name: RDMW2006M0T-A27 WKP35S Manufacturer: Walter Tools Product type: Milling insert Facts Insert diameter: 20 mm Thickness: 06 Clearance angle: 15° Tolerance class: M Special features Grade: WKP35S (Tiger·tec Silver) Coating: coated carbide Chipbreaker: A27 Suitable for: Steel (P), Cast iron (K) Shape: Round FAQ What materials is this insert intended for? The RDMW2006M0T-A27 WKP35S is designed for machining Steel (ISO P) and Cast iron (ISO K), reflecting its tailored WKP35S grade and Tiger·tec Silver technology. How does the Tiger·tec Silver grade improve performance? Tiger·tec Silver on the WKP35S grade provides elevated wear resistance and edge stability, which together extend service life and support dependable chip formation during production runs. Which insert geometry ensures good chip control? The round 20 mm form combined with the A27 chipbreaker and 15° clearance angle creates consistent chip breakage and secure cutting conditions for a wide range of steel and cast-iron operations. Is this insert compatible with standard toolholders? Yes, the insert conforms to common indexable insert conventions and the tolerance class M ensures repeatable seating and interchangeability with compatible holder systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Walter Tools is named for identification and comparison purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners implied by this listing. The offered article is an original, factory-new product of the stated manufacturer.
RDMW2006M0T-A27 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP35G grade for reliable steel machining, reduced tool changes and consistent part quality; order directly via Metav Werkzeuge or request application advice from the consultants. RDMW2006M0T-A27 WPP35G milling indexable insert, round, 15° relief — Walter Tools The RDMW2006M0T-A27 WPP35G is a round milling insert designed for steel machining (ISO P), combining a coated carbide grade with a specialised chipbreaker for stable, productive cutting in general milling applications Tiger·tec Gold coated grade WPP35G Suited for steel machining (ISO P) 15° relief for versatile engagement Round insert with A27 chipbreaker Consistent performance for steel machining and lower operating costs The WPP35G grade, part of the Tiger·tec Gold series, is a coated carbide solution optimised for steel (ISO P). Its composition and coating design deliver high wear resistance, which reduces the frequency of index changes and supports longer tool life. In practical terms, fewer interventions at the machine and steadier cutting parameters translate into improved uptime and a better short-term cost balance for production lines. Predictable chip control and stable cutting geometry A round design with the A27 chipbreaker provides reliable chip formation and evacuation in typical steel cutting regimes. The geometry supports multi-edge indexing, so the insert offers repeated, reproducible cutting edges that maintain component quality across batches. The 15° relief reduces entry forces and enables flexible engagement angles, helping to maintain surface finish while controlling cutting forces during interrupted cuts or varying depths of cut. Machine integration and process security for workshops The insert’s tolerance class M and standardised designation simplify replacement and tool inventory management. Its form and execution allow seamless integration into common milling toolholders used in CNC and conventional machines. This stability in geometry and interchangeability supports consistent cycle times and helps to secure process parameters in serial production without constant requalification. Productivity through material-specific optimisation Designed specifically for steels, the grade balances toughness and wear resistance to withstand the thermal and mechanical challenges of machining unalloyed and alloyed steels. The result is a product that favours productive machining with fewer tool changes and predictable edge life, aiding planning and reducing the administrative burden of frequent retooling. The combination of coated grade and chipbreaker fosters efficiency and consistent part quality. For tailored application advice or to secure supply of the Walter Tools RDMW2006M0T-A27 WPP35G insert, contact Metav Werkzeuge for an application assessment and delivery details via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RDMW2006M0T-A27-WPP35G-WALTER Designation: RDMW2006M0T-A27 WPP35G Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Facts Plate size: 20 Plate thickness: 06 Relief angle: 15° Tolerance class: M Special features Coating: Tiger·tec Gold Material suitability: P (steel) Chipbreaker: A27 Plate form: Round Execution: W Base designation: RDMW2006M0T-A27 FAQ What materials is this insert suitable for? The RDMW2006M0T-A27 WPP35G is formulated for machining steels (ISO P); the WPP35G grade and Tiger·tec Gold coating are optimised for typical steel cutting conditions. How does the A27 chipbreaker affect machining? The A27 chipbreaker on this round insert promotes controlled chip formation and evacuation when cutting steel, supporting stable cutting and consistent surface finish. Is this insert compatible with standard toolholders? The insert follows a standardised designation and tolerance class M, enabling straightforward integration into conventional milling toolholders designed for round inserts. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and edge life in steel machining, reducing the frequency of index changes and improving process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
RDMX0501M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and a dedicated WSM35G grade for demanding alloys to keep milling processes reliable and productive; order the insert directly via Metav Werkzeuge or consult our team for technical details and application advice. RDMX0501M0-D57 WSM35G milling insert — Tiger·tec Gold, 15° clearance RDMX0501M0-D57 WSM35G is a round milling indexable insert designed for reliable machining of stainless steels and heat-resistant alloys in demanding milling operations High wear resistance from Tiger·tec Gold Suited for stainless steels and superalloys Round geometry for versatile milling Chip control via D57 chipbreaker Durable cutting grade for challenging materials The insert is based on the WSM35G cutting grade within the Tiger·tec Gold family, a coated carbide solution engineered for machining materials that generate heat and tend to work-harden. This makes the component particularly suitable for stainless steels and superalloys, where stable edge retention and controlled wear are essential. The coating promotes consistent performance under thermal and mechanical stress, supporting longer tool life and predictable reconditioning intervals. Geometry engineered for consistent chip control A round geometry combined with the chipbreaker D57 provides dependable chip formation across variable engagement conditions. The 15° clearance angle helps to reduce rubbing and limit heat transfer to the cutting edge, while the compact size (series designation 05, thickness 01) allows the grade to be used in a variety of cutter bodies for operations requiring small corner radii or interrupted cuts. These geometry choices translate into steadier cutting forces and improved process stability. Productivity benefits and process reliability The coated carbide construction and the grade’s focus on edge stability enable higher effective productivity without compromising surface quality. By promoting secure chip evacuation and reducing edge chipping, the insert contributes to lower machine downtimes and fewer unplanned tool changes. In production terms, this means more consistent cycle times and an improved ratio of parts produced per tool life—advantages that add up across medium to large series runs. Practical application and selection advice This round indexable insert is intended for demanding milling tasks on materials classified under ISO groups M and S; it is effective for components where heat generation and material toughness challenge conventional grades. Use the grade when machining rostfreier Stahl (stainless steel) and heat-resistant alloys or titanium, depending on cutter geometry and fixture rigidity. For integration, match the insert to a compatible cutter body designed for round inserts and verify clamping and runout specifications before committing to series production. For tailored selection or to confirm suitability for a specific component, contact Metav Werkzeuge for application support and availability — eMail: info@metav-werkzeuge.com; Phone: +49 2822 7131930 Technical data SKU: RDMX0501M0-D57-WSM35G-WALTER Designation: RDMX0501M0-D57 WSM35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Grade family: Tiger·tec Gold Cutting grade: WSM35G Clearance angle: 15° Shape: Round Size: 05 Thickness: 01 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: S / M (superalloys/titanium and stainless steels) Chipbreaker: D57 Application focus: Machining of difficult-to-cut materials Series: Tiger·tec Gold FAQ What materials is this insert best suited for? The RDMX0501M0-D57 WSM35G insert is optimised for stainless steels and heat-resistant superalloys (ISO groups M and S), providing the edge stability required for such materials. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and evacuation; this reduces the risk of built-up edge and supports steady cutting forces during milling operations. Is the Tiger·tec Gold coating beneficial for long runs? Yes, the Tiger·tec Gold coating enhances wear resistance and thermal stability, extending tool life and improving process reliability in longer production series. Can this round insert handle interrupted cuts? The round geometry combined with the insert’s edge stability and chip control makes it suitable for many interrupted-cut conditions, provided the cutter body and clamping are appropriate. What does tolerance class M mean for my setup? Tolerance class M indicates manufacturing tolerances that support consistent seating and repeatable performance; verify the cutter body match to maintain that repeatability. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands beyond the sale of original, factory-new products.
RDMX0501M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from enhanced machining performance thanks to the Tiger‑tec Gold coating and the versatile WSP45G grade, combined with a 15° clearance for stable cutting and long tool life. The combination of robust chip control and a round insert geometry ensures consistent results across steel, stainless steel and heat‑resistant alloys. Order the RDMX0501M0‑D57 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. RDMX0501M0‑D57 WSP45G Fräswendeschneidplatte by Walter Tools — Tiger‑tec Gold, 15° clearance The RDMX0501M0‑D57 WSP45G is a round milling indexable insert engineered for versatile milling of steel, stainless steel and high‑temperature alloys in general machining applications. Tiger‑tec Gold PVD coating for wear resistance Suitable for steel, stainless and superalloys 15° clearance angle for stable cutting Round insert form with D57 chipbreaker Consistent performance across demanding materials The combination of a Tiger‑tec Gold coating and the WSP45G grade provides a balance between toughness and wear resistance that favours sustained cutting performance. Designed for the ISO material groups P / M / S, this insert copes with the thermal loads and varied chip formation encountered when machining unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The benefit is fewer unplanned tool changes and a more predictable production rhythm, which supports higher process reliability in serial operations. Round geometry for secure cutting and longer tool life A round insert offers a stronger cutting edge and the possibility of multiple indexed cutting positions, which increases effective tool life compared with sharper geometries. The integrated chipbreaker D57 promotes controlled chip fragmentation and evacuation, reducing the risk of built‑up edge and ensuring consistent surface finish. For users less familiar with chipbreaker design: the chipbreaker forms the chip flow path on the insert, breaking long swarf into manageable segments and lowering cutting forces in many milling conditions. Precision class and clearance angle tuned for stability The insert’s tolerance class M and a 15° clearance angle ensure repeatable seating and stable engagement in the cutter body, minimising vibration and improving dimensional consistency. A properly seated insert in tolerance class M reduces runout and makes clamping more secure, which is particularly valuable when milling interrupted cuts or faced with variable component geometry. These features combine to reduce scrap rates and to enhance first‑pass accuracy in machining chains. Practical machining notes and application scope For best results, pair this insert with a compatible round‑insert milling cutter and adapt feeds and speeds to the workpiece and machine rigidity. The WSP45G grade performs well at moderate to elevated cutting speeds and is particularly suited where stable chip control and edge integrity are required. When machining stainless‑type alloys, promote chip evacuation and avoid excessive dwell at the same cutting edge to limit heat build‑up. The RDMX0501M0‑D57 WSP45G insert is a practical choice for general and semi‑finished milling tasks where a balance of tool life and process security is required. Contact Metav Werkzeuge for application advice, stock availability and to request the RDMX0501M0‑D57 WSP45G from Walter Tools — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: RDMX0501M0-D57-WSP45G-WALTER Type: Fräswendeschneidplatte Designation: RDMX0501M0-D57 WSP45G Core data Insert size: 05 Clearance angle: 15° Thickness: 01 Versions / Special features Series / coating: Tiger‑tec Gold Grade: WSP45G Material rating: P / M / S Chipbreaker: D57 Tolerance class: M Shape: Round FAQ What materials can be machined with this insert? The RDMX0501M0‑D57 WSP45G insert is rated for ISO groups P / M / S, making it suitable for steel, stainless steel and heat‑resistant superalloys or titanium in a wide range of milling tasks. What is the advantage of the Tiger‑tec Gold coating? The Tiger‑tec Gold coating on the WSP45G grade increases thermal resistance and wear protection, extending edge life and maintaining surface quality during sustained milling operations. How does the D57 chipbreaker affect performance? The chipbreaker D57 promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving swarf management, which is beneficial for consistent surface finish and tool life. Is this insert compatible with standard round‑insert cutters? Yes, the round shape and the specified size (05) make the insert compatible with milling cutters designed for round indexable inserts; ensure the cutter seat matches the tolerance class M for best results. What machining conditions benefit most from this insert? This insert excels in jobs requiring a balance of wear resistance and edge stability, such as semi‑roughing to finishing passes in steel, stainless steel and high‑temperature alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected brand names and trademarks are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is original, brand‑new merchandise from the stated manufacturer.
RDMX07T1M0-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating, the round geometry and the 15° clearance for controlled chip formation and consistent tool life; combine these strengths for reliable cast iron milling and contact Metav Werkzeuge for process support or ordering. RDMX07T1M0-D57 WKK25G — round milling indexable insert, Tiger·tec Gold, for cast iron (Walter Tools) The RDMX07T1M0-D57 WKK25G is a round milling insert engineered for efficient machining of cast iron, offering a coated carbide grade tuned for abrasive materials and consistent performance in serial production Tiger·tec Gold coated for long tool life Optimised for abrasive cast iron machining Round insert design for versatile milling 15° clearance angle for stable cutting Consistent productivity when machining cast iron The combination of the WKK25G grade and the Tiger·tec Gold coating provides a balance between wear resistance and toughness that is particularly effective on cast iron. This composition reduces flank wear under the short, breaking-chip conditions typical for grey and nodular cast irons, so tool changes become less frequent and uptime increases. For production environments seeking repeatable results, the insert’s engineered surface treatment supports longer intervals between regrinds and contributes to a more predictable process cycle. Coating and grade explained for confident tooling decisions The coated carbide grade is designed to resist abrasive wear while maintaining edge robustness. In practical terms, the Tiger·tec Gold layer acts as a thermal and mechanical barrier that delays coating delamination and substrate abrasion. This means the insert keeps a usable cutting edge for longer, which translates into fewer interruptions, lower tooling consumption and improved cost-efficiency per part. For users unfamiliar with coating technology: the coating reduces direct contact between chip and substrate, limiting heat build-up and abrasive attack during each cutting pass. Geometry and chip control for stable milling processes The round form and the D57 chipbreaker are configured to offer stable chip formation and smooth engagement during peripheral and face milling. The round shape allows economical indexation and multi-directional use, which enhances flexibility in fixture layouts. The 15° clearance reduces rubbing at the flank and lowers cutting forces, supporting vibration damping and improved surface finish. Together, these geometric choices contribute to predictable tool behaviour, especially when cutting interrupted surfaces or variable wall sections typical in cast-iron components. Application scope and operational benefits Designed primarily for the ISO group K, this insert suits a range of cast-iron machining tasks where abrasive wear is the dominant challenge. The format with plate size 07 and thickness T1 gives a compact yet robust option for medium-duty milling cutters. Operators will find the grade effective in serial production and batch runs, where reliability, reduced tool change frequency and consistent part quality are priorities. When integrated into a controlled process, the insert supports higher overall productivity and a clearer cost-per-component calculation. For detailed process recommendations on the RDMX07T1M0-D57 WKK25G or to discuss integration into an existing machining setup, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant Technical data SKU: RDMX07T1M0-D57-WKK25G-WALTER Designation: RDMX07T1M0-D57 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Sort: WKK25G Material group: K Form: Round Facts Clearance angle: 15° Plate size: 07 Plate thickness: T1 Tolerance class: M Special features Coating: Tiger·tec Gold Substrate: coated carbide Chipbreaker: D57 Application: cast iron machining Execution: X FAQ What materials is this insert designed to machine? The RDMX07T1M0-D57 WKK25G is tailored for cast iron applications (ISO group K), optimised for abrasive, short-chipping cast materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold increases wear resistance and thermal stability on the coated carbide, allowing the insert to maintain cutting edge integrity longer during abrasive cast-iron operations. Can the round shape be indexed multiple times for extended use? Yes, the round insert geometry supports multiple index positions, enabling extended service life through economical rotation. What does the chipbreaker D57 provide in practice? The D57 chipbreaker promotes controlled chip formation and evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions. Is this insert suitable for heavy interrupted cuts? The combination of the WKK25G grade and the insert’s geometry offers a robust option for many interrupted cutting scenarios in cast iron, enhancing process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter brand is a registered trademark of its respective owner. Protected trademarks and product names are used solely for descriptive purposes. There is no affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
RDMX07T1M0-D57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the wear‑resistant WKP25S grade for longer tool life and consistent surface quality when machining steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. RDMX07T1M0-D57 WKP25S milling indexable insert – Walter Tools, Tiger‑tec Silver, 15° The RDMX07T1M0-D57 WKP25S is a round milling insert engineered for productive machining of steel and cast iron components in medium‑to‑high cutting regimes. Tiger‑tec Silver coating for wear resistance Suitable for steel and cast iron machining Round insert geometry for smooth cutting action Chipbreaker D57 for controlled chip formation Increased productivity through advanced coating and grade The combination of Tiger‑tec Silver technology and the WKP25S coated carbide grade delivers a measurable boost in productivity by improving wear resistance and thermal stability. The tailored coating reduces flank and crater wear at elevated cutting temperatures, so cycle times can be optimised without compromising tool life. For machining operations involving long engagement or interrupted cuts in steel and cast iron, this results in fewer indexings and a more predictable tool‑change schedule. Consistent chip control for improved surface quality The dedicated chipbreaker D57 has been designed to produce short, controlled chips even under varying cutting conditions. Effective chip control reduces the risk of built‑up edge and contributes to a consistent surface finish on the workpiece. This geometry helps maintain stable cutting forces, which supports process reliability and reduces vibration-related tool wear. Operators and process planners can therefore expect repeatable results and fewer reworks. Versatile round geometry and optimised relief angle The round geometry of the insert provides smooth entry and exit in the cut, distributing cutting forces evenly and enabling lower cutting edge sensitivity when radial depths vary. The 15° free angle supports good contact conditions between the insert and workpiece, balancing strength at the cutting edge with favourable shear conditions. Combined with the T1 thickness and tolerance class M, the insert is suitable for both finishing and productive semi‑finishing passes where stability and edge security are required. Application scope and handling benefits Designed for ISO groups P (steel) and K (cast iron), this indexable insert is a practical choice for mixed‑material job shops and production environments seeking a single grade to cover a broad material range. The stable chip formation and robust coating make the insert effective in both continuous and interrupted cutting. Replacement and handling are straightforward thanks to the standardised designation and geometry, which simplifies tool selection and inventory management across milling toolholders compatible with this round insert. For specific cutting data, application guidance or to acquire the RDMX07T1M0-D57 WKP25S from Walter Tools, contact Metav Werkzeuge for availability and tailored support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: RDMX07T1M0-D57-WKP25S-WALTER Designation: RDMX07T1M0-D57 WKP25S Product type: Milling indexable insert Manufacturer: Walter Tools Numbers / Core technical data Free angle: 15° Plate size: 07 Plate thickness: T1 Tolerance class: M Plate form: Round Chipbreaker: D57 Designs / Special features Series: Tiger‑tec Silver Grade: WKP25S Applicable material groups: P (steel), K (cast iron) Execution: X FAQ What materials is this insert suitable for? The RDMX07T1M0‑D57 WKP25S insert is engineered for ISO groups P (steel) and K (cast iron), making it suitable for a wide range of unalloyed and alloyed steels as well as common cast irons. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP25S grade increases thermal resistance and reduces abrasive wear, which extends the service life of the insert under higher cutting temperatures. What advantage does the chipbreaker D57 offer? The chipbreaker D57 produces short, controllable chips that help prevent edge build‑up and support a consistent surface finish, particularly useful in mixed cutting conditions. Is the round geometry suitable for finishing operations? Yes, the round geometry combined with the 15° free angle provides smooth cutting entry and even force distribution, which benefits finishing and semi‑finishing applications. How is the tolerance class relevant for setup? Tolerance class M ensures consistent insert dimensions for accurate seat repeatability and reliable clamping, simplifying setup and reducing variation between indexings. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer.
RDMX07T1M0-D57 WKP35G W KP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WKP35G grade combined with a round geometry and a 15° free angle for reliable performance in steel and cast-iron milling operations. The balanced design with chipbreaker D57 ensures stable chip control and consistent surface quality, supporting productive cycle times. Order the insert via Metav Werkzeuge or consult our technical team for application-specific recommendations. RDMX07T1M0-D57 WKP35G round milling insert, 15° clearance — Walter Tools RDMX07T1M0-D57 WKP35G is a coated indexable milling insert designed for general milling tasks in steel and cast iron, offering a versatile solution for medium-duty and finishing operations Tiger·tec Gold coating for extended life Grade WKP35G for steel and cast iron Round geometry for versatile milling Chipbreaker D57 for controlled chips Consistent productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade delivers a pronounced improvement in wear resistance and heat protection compared with uncoated grades. This insert is a coated carbide design optimised for typical heat and chip formation encountered when machining steel and cast iron (ISO groups P and K). The coating reduces flank and crater wear, enabling longer tool life and fewer index changes, which benefits throughput and lowers per-part tooling costs. Geometry and chip control that stabilise machining processes A round geometry brings strength at the cutting edge and enables varied cutting strategies, including trochoidal and up/down milling, with predictable performance. The 15° clearance reduces rubbing on the flank and helps maintain surface finish during interrupted cuts. The integrated chipbreaker D57 supports short, controlled chips on cast iron and well-formed chips on steel, reducing the risk of entanglement and improving evacuation in confined toolpaths. Application guidance for workshop integration and cost efficiency This indexable insert suits a wide range of operations from finishing to semi-finish where a balance of edge strength and surface quality is required. The grade is engineered to handle the thermal loads and abrasive tendencies of ferrous materials while delivering repeatable results. For machining strategies that require fewer tool changes and predictable wear, the insert’s properties contribute to reduced downtime and consistent component quality across batch and serial production runs. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold WKP35G inserts at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RDMX07T1M0-D57-WKP35G-WALTER Designation: RDMX07T1M0-D57 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Product type: Milling insert (indexable) Facts Free angle: 15° Shape: Round Size: 07 Thickness: T1 Chipbreaker: D57 Tolerance class: M Special features Coating technology: Tiger·tec Gold Material: Coated carbide Suitable for: Steel (P), Cast iron (K) Execution: X Round insert geometry for flexible toolpaths FAQ What material groups is this insert suitable for? The RDMX07T1M0-D57 WKP35G insert (Walter Tools) is suitable for steel and cast iron applications, corresponding to ISO groups P and K. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the RDMX07T1M0-D57 WKP35G insert improves heat resistance and wear behaviour, which typically extends the service life and reduces flank wear during steel and cast-iron machining. Which chipforming behaviour can be expected with chipbreaker D57? Chipbreaker D57 on this round insert produces controlled, short chips in cast iron and improved chip control in steel, aiding evacuation and reducing the risk of chip re-cutting. Is the round geometry suitable for trochoidal milling? Yes, the round geometry and 15° clearance of the RDMX07T1M0-D57 WKP35G make it compatible with trochoidal and high-efficiency milling strategies where edge robustness and smooth engagement are required. Can the insert be used for finishing operations? The grade WKP35G and the insert geometry provide a good balance between edge strength and surface finish, making it appropriate for finishing and semi-finishing cuts in ferrous materials. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer Walter Tools. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a recognised supplier of precision cutting tools.
RDMX07T1M0-D57 WKP35S Wendeplatten - Walter Tools
Benefit from stable chip formation, broad material coverage for steel and cast iron, and the wear‑resistant Tiger‑tec Silver grade for sustained milling productivity; order the RDMX07T1M0‑D57 WKP35S via Metav Werkzeuge or consult the technical team for application advice. RDMX07T1M0‑D57 WKP35S milling insert — Tiger‑tec Silver, round geometry, 15° clearance (Walter Tools) RDMX07T1M0‑D57 WKP35S is a round milling insert designed for general milling operations, offering reliable performance in steel and cast‑iron applications with an emphasis on controlled chip formation and repeatable seating. Tiger‑tec Silver coated grade WKP35S Suitable for steel and cast iron Round insert with 15° clearance Chipbreaker D57 for controlled chips High productivity through an advanced cutting grade The Tiger‑tec Silver chemistry combined with the WKP35S grade offers a balanced coated‑carbide system that emphasises wear resistance and thermal stability. This results in a predictable reduction in flank and crater wear rates when machining steel and cast iron, supporting longer tool life and fewer index changes during production runs. Process reliability and consistent tool behaviour translate directly into higher uptime and lower tool‑related variability on the shop floor. Precision geometry for reliable chip control and surface quality The insert’s round geometry together with the chipbreaker D57 provides consistent chip fragmentation and evacuation, minimising the risk of built‑up edge and part rework. The 15° clearance reduces rubbing at the flank face, which improves surface finish and lowers cutting forces in interrupted milling. With multiple usable edges per index, this round insert design helps lower the cost per cutting edge while maintaining steady machining conditions across varied operations. Repeatable seating and robust edge performance Manufactured to industrial tolerances, the T1 thickness and tolerance class M ensure secure and repeatable clamping in compatible toolholders. The RDMX07T1M0‑D57 WKP35S plate benefits from a substrate and coating pairing optimised for mixed‑material environments, delivering a stable cutting edge under cyclic loads. The execution marked X denotes the specific geometry variant tailored for standard milling fixtures, simplifying insert changes and setup verification. Practical application scope and operational guidance This insert is suitable for face and peripheral milling tasks in batch and continuous production where flexibility across materials matters. Backed by the Walter Tools manufacturing standard, the grade contributes to high process security and consistent outcomes in everyday machining. For exact feeds, speeds and recommended cutting conditions adapted to a given machine, tooling and workpiece combination, Metav Werkzeuge can supply tailored parameter sheets and application notes to support efficient implementation. For tailored cutting data, availability and rapid supply of the RDMX07T1M0‑D57 WKP35S from Walter Tools, contact Metav Werkzeuge for specialised advice and local delivery at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: RDMX07T1M0-D57-WKP35S-WALTER Designation: RDMX07T1M0‑D57 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Geometry: Round Plate size: 07 Thickness: T1 Clearance angle: 15° Chipbreaker: D57 Tolerance class: M Execution: X Applicable material groups: P / K Facts Clearance angle: 15° Plate size: 07 Thickness: T1 Tolerance class: M Special features Series Tiger‑tec Silver coating technology Coated carbide (optimized for wear resistance) Suitable for steel (P) and cast iron (K) Chipbreaker D57 for controlled chip formation Round indexable insert with multiple cutting edges Grade WKP35S for versatile milling tasks Execution: X (design variant for standard toolholders) Brand: Walter Tools FAQ What materials can this insert machine effectively? The RDMX07T1M0‑D57 WKP35S is formulated for machining steel and cast iron, with the WKP35S grade and Tiger‑tec Silver technology providing the wear resistance and chip behaviour needed for these groups. What advantage does the chipbreaker D57 offer? The chipbreaker D57 on this milling insert promotes controlled fragmentation and evacuation of chips, reducing rework and improving surface finish during the milling of both steel and cast‑iron components. How does the round geometry affect tool life and cost? Round insert geometry provides multiple effective cutting edges per index, which lowers the cost per cutting edge and extends the usable life before replacement, supporting economical production with reliable edge performance. Is the clearance angle important for interrupted milling? Yes — the 15° clearance decreases flank contact and rubbing, which is particularly beneficial for interrupted cuts and improves surface quality while reducing cutting forces. What does tolerance class M mean for setup? Tolerance class M indicates industry‑standard dimensional precision for repeatable seating in toolholders, ensuring accurate tool‑to‑part relationships and stable machining across index changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are cited for explanation only; no affiliation between Metav Werkzeuge and the respective trademark owners is implied. The offered item is an original, brand‑new product of the manufacturer.
RDMX07T1M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G grade and a precise 15° relief angle for consistent chip control and extended tool life; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application advice. RDMX07T1M0-D57 WSM35G round milling indexable insert by Walter Tools — coated Tiger·tec Gold, for rostfreier Stahl and heat‑resistant superalloys RDMX07T1M0-D57 WSM35G is a round milling indexable insert designed for high demands in difficult‑to‑machine materials, offering stable cutting edges and reliable chip formation in interrupted and continuous milling. Tiger·tec Gold coated carbide grade WSM35G Optimised D57 chipbreaker for secure chip control 15° relief angle for stable cutting edge Round 07 format, T1 thickness, tolerance M High‑performance grade for demanding materials The RDMX07T1M0-D57 WSM35G insert combines a Tiger·tec Gold coating with a specially developed coated carbide grade to address machining challenges in rostfreier Stahl and heat‑resistant superalloys. The coating improves thermal resistance and wear behaviour, which in turn supports stable cutting edges under high temperatures. For operations where material toughness and heat generation impair process security, this grade contributes to predictable tool behaviour and reduced edge breakdown, helping to maintain production throughput and avoid premature rework. Predictable chip control for improved surface quality The geometry centres on an optimised D57 chipbreaker that promotes consistent chip segmentation and evacuation. Controlled chip formation reduces the risk of built‑up edge and supports a cleaner workpiece finish, shortening downstream finishing steps. In combination with the round form factor, the insert offers smooth engagement with the workpiece, lowering vibration tendencies and helping to achieve repeatable surface quality in both roughing and semi‑finishing operations. Robust geometry for extended cutting life A 15° relief angle and tolerance M deliver durable cutting performance and dimensional reliability in demanding milling cycles. The compact T1 thickness and the RDMX07 format balance rigidity and accessibility for a wide range of tool holders. These geometric choices help protect the cutting edge during heavy engagement and when machining materials that generate high cutting forces, thereby supporting longer tool life and fewer indexings during production. Application scope and process integration Designed for the machining of rostfreier Stahl (ISO group M) and superalloys/titanium (ISO group S), this insert is particularly suited to components that require secure chip control and thermal stability. The coated carbide grade is tailored to support stable chip formation across variable geometries, making it a practical option for workshops that handle mixed batches of difficult‑to‑machine materials. For integration into existing tool systems, process engineers can match the insert to compatible milling cutters that accept the RDMX07 family and consult Metav Werkzeuge for holder and parameter recommendations. For secure, high‑productivity milling with Walter Tools quality, contact Metav Werkzeuge for procurement and application support via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the RDMX07T1M0-D57 WSM35G insert and suitable toolholder combinations. Technical Data SKU: RDMX07T1M0-D57-WSM35G-WALTER Label: Fräswendeschneidplatte RDMX07T1M0-D57 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade series: Tiger‑tec Gold Facts Relief angle: 15° Plate size: 07 Plate thickness: T1 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G Chipbreaker: D57 Shape: Round Material compatibility: S / M (heat‑resistant superalloys/titanium and rostfreier Stahl) FAQ Which materials is this insert suitable for? The RDMX07T1M0-D57 WSM35G insert is formulated for rostfreier Stahl and heat‑resistant superalloys/titanium (ISO groups M and S), offering thermal stability and controlled chip formation for these materials. What advantage does the WSM35G grade provide? WSM35G, incorporated in the Tiger·tec Gold series, provides improved wear resistance and thermal stability, which helps the RDMX07T1M0-D57 WSM35G insert maintain a stable cutting edge under elevated temperatures. How does the D57 chipbreaker affect machining? The D57 chipbreaker on this insert promotes consistent chip segmentation and evacuation, reducing the likelihood of built‑up edge and improving surface finish during milling of challenging materials. Is the round format beneficial for specific operations? Yes; the round form offers smooth engagement and uniform cutting edge distribution, which is beneficial in interrupted cuts and when a forgiving entry angle improves process stability. What are the key geometric identifiers to check when replacing inserts? Refer to the designation RDMX07T1M0‑D57 and the T1 thickness, 07 size and 15° relief angle to ensure compatibility with the intended toolholder and machining strategy. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RDMX07T1M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the hard-wearing Tiger‑tec Gold coating, the controlled D57 chipbreaker and the 15° clearance angle for consistent milling performance and long tool life. Order the RDMX07T1M0-D57 WSP45G insert directly via Metav Werkzeuge or ask our consultants if needed. RDMX07T1M0-D57 WSP45G milling indexable insert — Round geometry, Tiger‑tec Gold coating (Walter Tools) The RDMX07T1M0-D57 WSP45G is a round milling indexable insert designed for demanding finishing and light roughing in a wide range of materials, combining PVD coating technology with a stable chipforming geometry. Tiger‑tec Gold PVD-coated carbide Versatile for Stahl, rostfreier Stahl and Superalloys 15° clearance angle for secure cutting Round plate size 07 with D57 chipbreaker High-performance coating for extended tool life The combination of the Tiger‑tec Gold surface treatment with a PVD-coated carbide substrate provides enhanced resistance against built-up edge and thermal loads. This coating chemistry improves flank and crater wear behaviour and therefore extends the effective life of the cutting edge. For manufacturing operations that prioritise predictable tool-life and fewer index changes, the coated grade WSP45G delivers measurable process stability and repeatability. Wide material compatibility for fewer tool changes Engineered for the ISO groups P, M and S, this insert supports machining of Stahl, rostfreier Stahl and heat-resistant alloys such as Superalloys and titanium. The substrate and coating are tuned to manage the typical chip formation and temperatures of these groups, which reduces the risk of build-up and maintains surface quality. As a result, tool inventories can be simplified and setup times reduced when one grade covers several workpiece families. Geometry and edge control for consistent surfaces The round plate form with a dedicated D57 chipbreaker and a 15° relief angle ensures steady chip control and a robust edge line during interrupted cuts and varying engagement angles. The nominal plate size (07) and plate thickness T1, together with tolerance class M, provide the mechanical stability required for repeatable finishing passes. This geometry enables reliable heat distribution and a consistent part finish with less burr formation and improved process security. Integration into production and process support The insert is straightforward to mount in common round-cutter tool holders and benefits from Walter Tools’ focus on stable cutting edges and predictable results. Its execution and series characteristics favour productive milling in both job-shop and serial environments. For customers seeking application data, cutting parameters or holder recommendations, technical consultation can optimise cutting speeds and feeds to match machine power and workpiece properties. Contact Metav Werkzeuge for personalised cutting data and to arrange supply of this Walter Tools RDMX07T1M0-D57 WSP45G milling insert — Metav Werkzeuge provides practical support and quick delivery options Technical Data Article number: RDMX07T1M0-D57-WSP45G-WALTER SKU: RDMX07T1M0-D57-WSP45G-WALTER Product name: Fräswendeschneidplatte RDMX07T1M0-D57 WSP45G Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Plate size: 07 Plate thickness: T1 Relief angle: 15° Chipbreaker: D57 Tolerance class: M Plate form: Rund Execution: X Special features PVD-coated carbide grade Suited for Stahl, rostfreier Stahl, Superalloys and titanium Round geometry for multi-directional engagement Stable chipformer for consistent chips Designed for finishing and versatile milling operations FAQ What materials can this insert machine effectively? The RDMX07T1M0-D57 WSP45G insert is engineered for machining Stahl, rostfreier Stahl and Superalloys, offering stable chip formation and edge security across these groups. Which series and coating technology does the insert use? This insert belongs to the Tiger‑tec Gold series and uses a PVD coating on a carbide substrate to improve wear resistance and thermal stability. What does the D57 chipbreaker provide in practice? The D57 chipbreaker is designed to produce controlled, compact chips for finishing to reduce recutting, enhance surface quality and ease chip evacuation in typical milling set-ups. How does the round plate geometry benefit milling operations? The round geometry allows variable entry angles and smooth indexing, improving tool life and enabling consistent performance in light roughing and finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
RDMX1003M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a proven D57 chipbreaker for higher milling productivity and consistent edge stability; order directly via Metav Werkzeuge or request tailored advice from our consultants. RDMX1003M0-D57 WSP45G milling insert — Tiger·tec Gold, 15° clearance, round geometry (Walter Tools) A RDMX1003M0-D57 WSP45G milling indexable insert for versatile milling tasks, optimised for steel, rostfreier Stahl and heat-resistant superalloys in high-performance applications Tiger·tec Gold PVD coating Suitable for steel, rostfreier Stahl, superalloys Round insert with D57 chipbreaker 15° clearance angle, tolerance class M Higher throughput thanks to a resilient coating system The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balance of wear resistance and toughness that supports higher cutting parameters. The coated carbide substrate, designed for milling, provides stable cutting edges under thermal and mechanical load, which translates into longer tool life and fewer indexings. The D57 chipbreaker promotes consistent chip formation during interrupted cuts, while the 15° clearance reduces rubbing and helps to preserve surface quality. This performance-oriented design supports sustained productivity in batch and series production. Broad material capability with controlled chip behaviour The insert is specified for the ISO groups P/M/S, meaning suitability for unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. The PVD-based Tiger·tec Gold technology enhances heat resistance and reduces adhesion on the cutting edge, which is particularly important for rostfreier Stahl and nickel-base alloys that tend to work-harden and form built-up edge. The round geometry inherently supports smooth transitions and stable engagement, while the chipbreaker maintains secure chip evacuation—benefits that reduce rework and improve cycle-time reliability. Reliable process integration and economy of operation With a compact plate size and tolerance class M, this round milling insert offers predictable seating accuracy and repeatable results across toolholders that accept the specified format. The plate thickness 03 and the round shape make it suitable for a variety of pocketing and slotting strategies where edge robustness is required. The Tiger·tec Gold series is engineered to provide a productive balance between wear resistance and fracture toughness, supporting longer runs and fewer tool changes. For production environments aiming to lower downtime and maintain consistent surface finish, this insert provides measurable process security. Discuss specific application requirements with Metav Werkzeuge to ensure optimal grade selection and toolholder compatibility — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RDMX1003M0-D57-WSP45G-WALTER Product type: Milling insert (indexable) Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Geometry: Round Core data Clearance angle: 15° Plate size: 10 Thickness designation: 03 Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger·tec Gold (PVD) Substrate: Coated carbide Material suitability: P / M / S Shape: Round Execution: X FAQ What workpiece materials are suitable for this insert? The insert is designed for the ISO groups P, M and S; the RDMX1003M0-D57 WSP45G is therefore suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit milling performance? The Tiger·tec Gold PVD coating enhances heat resistance and wear protection, improving edge life and stability under the thermal loads typical of milling rostfreier Stahl and high-temperature alloys. Is the round geometry advantageous for interrupted cuts? Yes; the round shape combined with the D57 chipbreaker provides smooth engagement and reliable chip control, which helps to absorb shocks during interrupted cuts and reduces the risk of edge chipping. What does tolerance class M indicate for this insert? Tolerance class M specifies the manufacturing precision of the insert seating and dimensions; this supports consistent repeatability when indexing and contributes to predictable machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer (Walter Tools).
RDMX1003M0T-A27 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for consistent chip control and longer tool life in steel and cast iron milling; order directly via Metav Werkzeuge or consult our specialists for application support. RDMX1003M0T-A27 WKP25S — round indexable milling insert, Tiger‑tec Silver coating, for steel and cast iron (Walter Tools) The RDMX1003M0T-A27 WKP25S is a round milling indexable insert designed for general and interrupted milling operations, optimised for machining Steel and Cast iron with a robust A27 chipbreaker and a 15° clearance for reliable engagement. Round insert RDMX1003M0T-A27 WKP25S Tiger‑tec Silver coated grade WKP25S A27 chipbreaker for stable chip control 15° clearance angle for versatile milling Consistent chip control reduces cycle times and scrap The combination of the A27 chipbreaker and the Tiger‑tec Silver coating delivers reliable chip control, especially during medium to heavy milling of ISO group P (steel) and K (cast iron) materials. The geometry of the insert channels chips away from the cutting zone, which minimises rework and machine downtime. As the grade WKP25S is a coated carbide, it is tuned for the heat and abrasion typical of steel and cast‑iron machining; this translates into fewer tool changes and a more stable machining process for serial production environments. Robust cutting edge and clearance for predictable tool life A rounded geometry combined with a 15° clearance and the insert’s construction supports a stable cutting edge under variable loads. The coated carbide substrate and the specified tolerance class M ensure dimensional repeatability and resistance to edge chipping in mixed cutting conditions. For shop floors requiring predictable tool life and straightforward insert indexing, this configuration reduces the risk of unexpected edge failure and supports planned maintenance cycles, improving overall process security. Broad applicability across steels and cast irons Designed around ISO classifications, the insert’s material compatibility covers a wide range of unalloyed and alloyed steels as well as grey and nodular cast iron. The designation for machinable materials (P / K) indicates suitability for typical industrial steels and abrasive cast materials; users benefit from a single insert type covering multiple workpiece families. Explaining the terms: ISO P refers to steel workpieces with heat‑related chip behaviour, while ISO K targets the often abrasive, short‑chip characteristics of cast irons—this insert handles both with minimal setup changes. Productivity gains and economical operation in production By combining a proven grade with a controlled chipbreaker geometry, the insert supports higher uninterrupted cutting rates and consistent surface finish quality. Reduced flank wear and stable chip evacuation lower the frequency of regrinds and replacement, contributing to a better cost‑per‑part figure in batch production. For manufacturers aiming to improve throughput without sacrificing repeatability, the insert provides a pragmatic balance of productivity and tool life that integrates easily into established machining cycles. For application advice, stock availability or to request cutting data specific to the intended material and machine, contact Metav Werkzeuge for expert guidance and fast processing at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: RDMX1003M0T-A27-WKP25S-WALTER Article designation: RDMX1003M0T-A27 ISO designation: RDMX1003M0T-A27 WKP25S Series: Tiger‑tec Silver Grade: WKP25S Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 10 Plate thickness: 03 Clearance angle: 15° Chipbreaker: A27 Tolerance class: M Special features Coated carbide grade (Tiger‑tec Silver) Material suitability: P / K (Steel / Cast iron) Round insert geometry Execution: X FAQ What materials is this insert suitable for? The insert is optimised for machining steel and cast iron; the WKP25S grade and Tiger‑tec Silver coating enable reliable performance on both ISO P and ISO K workpieces. How does the A27 chipbreaker benefit milling operations? The A27 chipbreaker on the RDMX1003M0T-A27 WKP25S promotes controlled chip formation and evacuation, reducing re-cutting and improving surface consistency during general milling. Is this insert compatible with interrupted cuts or unstable setups? The round geometry and 15° clearance provide robustness in variable engagement conditions, helping to maintain edge stability during interrupted cuts. Can this insert reduce overall tooling costs in production? By extending tool life through a wear‑resistant coating and stable chip control, the insert contributes to a lower cost per part in repetitive production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for descriptive purposes only. There is no affiliation between our company and the trademark holders. The offered item is original, factory‑new product of the manufacturer.
RDMX1003M0T-A27 WKP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold wear resistance, a dedicated WKP35G grade and precise geometry for reliable machining of steel and cast iron; order via Metav Werkzeuge or consult our specialists for application-specific advice. RDMX1003M0T-A27 WKP35G milling indexable insert — Tiger·tec Gold coated, for steel and cast iron | Walter Tools The RDMX1003M0T-A27 WKP35G is a round milling indexable insert designed for contour and face operations in steel and cast iron, combining a robust coated carbide grade with a dedicated A27 chipbreaker for consistent chip control. Tiger·tec Gold coated for extended tool life Optimised for steel and cast iron machining 15° clearance angle for secure chip control Round size 10 insert for profile and face milling Increased productivity through advanced coating technology The insert's Tiger·tec Gold technology and WKP35G coated carbide grade deliver a clear productivity advantage: improved wear resistance and stable cutting edges reduce downtime for insert changes and maintain dimensional accuracy over longer production runs. For industrial environments where cycle times and tool-change frequency affect output, the coating prolongs effective tool life while keeping maintenance predictable. This results in fewer interruptions and a more consistent throughput on high-volume milling tasks. Reliable chip formation and surface quality Equipped with the A27 chipbreaker and a 15° clearance angle, the round plate ensures reliable chip formation when machining group P (steel) and group K (cast iron) materials. The geometry is optimised to handle the typical heat and chip characteristics of these material families, improving surface finish and reducing the risk of built-up edge. As a consequence, workpieces benefit from steady dimensional results and less rework, especially in applications requiring repetitive contour or face milling. Practical geometry for flexible application The component is a round, size 10 insert with thickness code 03 and tolerance class M, offering straightforward handling and repeatable mounting in standard indexable milling holders. The round form supports profile and face milling where radial engagement varies, while the tolerance class ensures consistent seating and reproducible results across tool changes. For operations transitioning between steel and cast iron, the insert’s specifications make it a versatile choice without the need for frequent tool swaps. Clear specification for process planning The grade WKP35G is a Walter Tools coated-carbide solution optimised for a wide range of steels and many cast iron variants according to ISO 513. The designation indicates a balance between toughness and abrasion resistance suitable for typical industrial cutting parameters. Process planners will appreciate the predictable wear behaviour, which supports reliable tool-life forecasts and helps to fine-tune cutting data for both roughing and finishing passes with minimal trial-and-error. For high-process stability with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored application advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RDMX1003M0T-A27-WKP35G-WALTER Name: RDMX1003M0T-A27 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Clearance angle: 15° Insert size: 10 Thickness code: 03 Tolerance class: M Special features Grade: WKP35G (coated carbide) Chipbreaker: A27 Form: Round Applicable for: P (steel), K (cast iron) FAQ Is this insert suitable for both steel and cast iron? Yes. The RDMX1003M0T-A27 WKP35G is specified for ISO groups P and K, meaning it is optimised for machining various steels and many cast iron grades. What advantage does Tiger·tec Gold offer? Tiger·tec Gold coating on the WKP35G grade improves wear resistance and edge stability, extending insert life and supporting consistent machining performance. What does the A27 chipbreaker provide? The A27 chipbreaker is designed for reliable chip control in face and profile milling, reducing the likelihood of long, stringy chips and improving surface finish. How does the round form affect application choice? A round insert with size 10 offers flexibility for profile and face milling where variable radial engagement is required, allowing smoother transitions and fewer specialised inserts. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and Walter Tools. The offered article is original, brand-new goods from the manufacturer.
RDMX1003M0T-A27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the A27 chipbreaker to achieve stable, long‑lasting milling of steel; the round RDMX1003M0T-A27 WPP35G insert combines wear resistance and consistent chip control for reliable cycle times — order via Metav Werkzeuge or consult the team for application advice. RDMX1003M0T-A27 WPP35G — milling indexable insert, Tiger·tec Gold coating for steel machining | Walter Tools The RDMX1003M0T-A27 WPP35G is a round indexable milling insert developed for steel machining applications, combining a wear‑resistant Tiger·tec Gold grade with an A27 chipbreaker for improved chip control and process stability. Tiger·tec Gold coating for extended wear resistance Optimised A27 chipbreaker for reliable chip control 15° clearance angle, round plate Ø10, thickness 03 Suited for machining steel (ISO group P), tolerance M Consistent performance in steel machining The WPP35G grade of the insert is a coated carbide developed for the thermal and chip‑formation characteristics of steel (ISO group P). The combination of the Tiger·tec Gold technology and the substrate composition provides improved wear resistance and edge stability, which translates into longer tool life and fewer changes during production. As a result, machining cycles become more predictable and productive, reducing scrap risk and supporting higher machine utilisation. Reduced downtime through reliable wear resistance The A27 chipbreaker is designed to shape chips consistently in common steel grades, improving evacuation and reducing the chance of re‑cutting. Coupled with the 15° clearance angle, the geometry supports stable cutting forces and modest cutting temperatures, which helps maintain dimensional repeatability. The tolerance class M indicates consistent manufacturing accuracy of the insert, contributing to predictable seat fit and repeatable component quality in serial production. Compatibility and practical application guidance The round Ø10 plate with a thickness designation 03 and execution X makes the insert versatile for radial engagement and contouring operations where a round geometry is preferred. The item is specified as suitable for steel, and the series Tiger·tec Gold is geared towards production environments that demand both wear resistance and balanced toughness. For optimisation of cutting data, select speeds and feeds in accordance with the machine rigidity, workpiece condition and coolant strategy; modest reductions in speed can extend edge life in interrupted cuts. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools Tiger·tec Gold inserts and compatibility checks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: RDMX1003M0T-A27-WPP35G-WALTER Label: Fräswendeschneidplatte RDMX1003M0T-A27 WPP35G Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Designation: RDMX1003M0T-A27 WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 15° Insert size: 10 Thickness: 03 Tolerance class: M Special features Coating / grade: WPP35G (Tiger·tec Gold) Chipbreaker: A27 Shape: Round Execution: X Material group: P (steel) Suitable for steel: Yes FAQ What materials is this insert intended for? The RDMX1003M0T-A27 WPP35G insert is intended primarily for steel machining, corresponding to ISO group P, and its grade and coating are optimised for the heat and chip characteristics of those materials. How does the A27 chipbreaker affect machining? The A27 chipbreaker on the RDMX1003M0T-A27 WPP35G promotes controlled chip formation and evacuation when machining steel, which reduces the risk of built‑up edge and supports stable surface finish. What does the tolerance class M mean for production? Tolerance class M for the RDMX1003M0T-A27 WPP35G indicates a medium dimensional accuracy of the insert, supporting consistent seat fit and repeatable positioning in tool holders for serial production. Can this insert be used for interrupted cuts? The Tiger·tec Gold grade of the RDMX1003M0T-A27 WPP35G provides balanced toughness and wear resistance suitable for many interrupted‑cut conditions in steel, though adjustment of cutting parameters is advised for heavy interruptions. What geometry features should be considered when selecting this insert? Consider the round shape, Ø10 designation and 03 thickness of the RDMX1003M0T-A27 WPP35G when planning radial engagement and contouring operations; the 15° clearance angle and A27 chipbreaker support general steel milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
RDMX12T3M0T-A27 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP25S grade for consistent performance when machining steel and cast iron; the A27 chipbreaker and 15° relief promote stable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. RDMX12T3M0T-A27 WKP25S — milling insert, round 12 mm, 15° clearance (Walter Tools, Tiger·tec Silver) RDMX12T3M0T-A27 WKP25S is a round milling insert designed for productive machining of steel and cast iron, combining Tiger·tec Silver coating with a dedicated chipbreaker geometry for reliable chip control in interrupted and continuous cuts Tiger·tec Silver coated grade WKP25S Optimised A27 chipbreaker for stable chips Suitable for steel and cast iron machining 15° clearance angle for improved engagement Consistent machining performance through coating and grade The combination of the Tiger·tec Silver coating and the WKP25S substrate delivers a balance of wear resistance and toughness tailored for machining steel and cast iron. This pairing reduces flank wear and maintains a sharp cutting edge under varying cutting conditions, which translates into more predictable tool life and fewer insert changes. The design is especially effective where heat generation and abrasive wear demand a coated, robust grade. Secure chip control and surface quality with A27 geometry The A27 chipbreaker is engineered to control chip formation for both continuous and interrupted milling operations. Stable chip evacuation reduces the risk of recutting and helps preserve workpiece finish, contributing to consistent surface quality. For applications where cycle time and reproducibility are important, the tailored chip control offers a measurable improvement in process stability. Geometry and dimensions that aid process integration The insert’s round form and nominal 12 mm size provide a compact cutting edge geometry that is easy to index and integrate into existing toolholders. The T3 thickness and 15° clearance angle improve tool engagement and reduce cutting forces in radial entries, which can be beneficial in light to medium depth cuts. These geometric features support smoother entry behaviour and reduce shock loading in interrupted cuts. Application focus and operational benefits Specifically optimised for ISO material groups P (steel) and K (cast iron), this insert supports a broad range of shop-floor applications from general-purpose roughing to finishing passes where a coated carbide grade is required. The tolerance class M ensures dimensional consistency for repeatable set-ups, aiding in quicker tool changeover and less downtime. Where productivity and predictable performance are priorities, the insert offers a practical combination of robustness and surface integrity. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools Tiger·tec Silver inserts and to confirm the optimal grade and geometry for specific machining tasks Technical Data Article number: RDMX12T3M0T-A27-WKP25S-WALTER Label: Fräswendeschneidplatte RDMX12T3M0T-A27 WKP25S Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Size: 12 mm Thickness: T3 Clearance angle: 15° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: A27 Plate form: Round Material designation: P / K (steel and cast iron) Execution: X ISO designation: RDMX12T3M0T-A27 WKP25S FAQ What materials is this insert suitable for? The RDMX12T3M0T-A27 WKP25S insert is suitable for ISO groups P and K, meaning it is recommended for machining steel and cast iron. What is the advantage of the Tiger·tec Silver coating? The Tiger·tec Silver coating on this Walter Tools insert improves wear resistance and heat management, offering longer edge life and consistent cutting performance in steel and cast iron operations. How does the A27 chipbreaker influence the process? The A27 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of recutting and helping to maintain surface quality during both continuous and interrupted milling. Is the round 12 mm form intended for specific toolholders? The round 12 mm form offers a compact cutting edge that fits a variety of milling toolholder designs; check the holder’s compatible insert designation and seating for the RDMX12T3M0T-A27 geometry. Does the tolerance class affect interchangeability? Yes, the M tolerance class indicates consistent dimensional accuracy, facilitating repeatable set-ups and easier interchangeability between inserts and holders. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, brand-new merchandise from the manufacturer Walter Tools.
RDMX12T3M0T-A27 WKP35G X Wendeplatten - Walter Tools
Take advantage of the combination of robust Tiger·tec Gold coating, precise 15° clearance angle and compatibility with both steel and cast iron to reduce tool changes and maintain stable production. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. RDMX12T3M0T-A27 WKP35G – Round milling indexable insert with Tiger·tec Gold coating for steel and cast iron | Walter Tools The RDMX12T3M0T-A27 WKP35G is a round milling insert designed for productive and reliable machining of steels and cast irons in industrial milling applications. Tiger·tec Gold coating for long tool life Designed for steel and cast iron machining Round form, 12 mm size for versatile milling 15° clearance angle for stable cutting Longer tool life through advanced coating technology The combination of the Tiger·tec Gold series and a coated carbide base provides enhanced wear resistance and thermal stability during continuous milling. The advanced coating reduces flank wear and helps maintain the cutting edge under the thermal loads typical when machining steel and cast iron, which in turn reduces the frequency of tool changes and unplanned downtime. For production environments looking to improve uptime, this cutting grade delivers consistent performance through extended tool life. Stable chip control and reliable cutting behaviour Equipped with an A27 chipbreaker and a 15° clearance angle, this round insert is engineered to produce controlled chip formation and reliable evacuation. The geometry supports predictable chip breaking in both ductile and brittle materials, lowering the risk of built-up edge and improving surface finish. As a result, machining cycles become more repeatable and setup adjustments are minimised, contributing to a steadier process and better part quality. Precision and process consistency for industrial workflows Tolerance class M and the compact T3 thickness with a nominal 12 size support tight repeatability during index changes. The round form is forgiving in interrupted cuts and allows multiple cutting edges to be indexed, which increases overall tool utilisation. These characteristics translate into a favourable balance between tool cost and part output, making the insert suitable for medium- to high-volume milling where process consistency and predictable component quality are priorities. Clear material classification and application range The cutting grade is tailored for ISO groups P and K, meaning it is optimised for both unalloyed/low-alloy steels and a range of cast iron grades. ISO group designations indicate the typical workpiece families the insert is intended for; P covers steels with their characteristic chip and heat behaviours, while K addresses abrasive grey and nodular cast irons with short, brittle chips. This clarity helps planners and buyers select the right grade without unnecessary testing, accelerating tool selection for varied production tasks. Speak with Metav Werkzeuge for tailored application advice on the RDMX12T3M0T-A27 WKP35G insert and arrange supply for your next production run — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: RDMX12T3M0T-A27-WKP35G-WALTER Article designation: RDMX12T3M0T-A27 WKP35G Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Size: 12 Thickness: T3 Clearance angle: 15° Tolerance class: M Special features Chipbreaker: A27 Coating / grade: WKP35G (coated carbide) Shape: Round Material suitability: P (steel) and K (cast iron) FAQ What materials is this insert suitable for? The RDMX12T3M0T-A27 WKP35G is specified for ISO groups P and K, which means suitability for a broad range of steel grades and cast iron workpieces. How does the Tiger·tec Gold series improve performance? The Tiger·tec Gold coating on the WKP35G grade increases wear resistance and thermal stability, helping maintain edge life and consistent cutting performance in industrial milling. What does the A27 chipbreaker do? The A27 chipbreaker promotes controlled chip formation and evacuation, reducing chip-related issues and supporting a better surface finish during milling of steels and cast irons. Are there special handling or indexing recommendations? Indexing should follow standard safety and clamping procedures for round inserts; the geometry permits multiple edge uses and benefits from consistent torque and stable cutter holders for best results. What are the key dimensional specifications to check when replacing an insert? Verify size (12), thickness (T3), clearance angle (15°) and tolerance class (M) when selecting a direct replacement to ensure correct fit and process repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and brand names mentioned, including Walter Tools, are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the brands cited. The offered article refers to original, factory-new goods from the manufacturer.
RDMX12T3M0T-A27 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear protection, the WKP35S grade and the compact round form for consistent chip control and long tool life; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. RDMX12T3M0T-A27 WKP35S indexable milling insert — Walter Tools, Tiger·tec Silver, round 12 mm, 15° clearance The RDMX12T3M0T-A27 WKP35S is a round indexable milling insert designed for productive machining of steel and cast iron in general milling operations. Tiger·tec Silver coating for enhanced wear resistance Suitable for steel and cast iron machining 15° clearance and round 12 mm form for versatility Grade WKP35S with stable chip control Consistent productivity for steel and cast iron machining The insert is based on the Tiger·tec Silver coating technology and the WKP35S coated-carbide grade, delivering improved wear resistance and stable performance in demanding conditions. Designed for machining group P (steel) and K (cast iron) according to ISO 513, the geometry and coating combination promotes predictable chip formation and extended tool life, which reduces tool-change frequency and supports a lower cost per part in medium- to high-volume production. The chipbreaker designation A27 helps to control broken chips typical of steel and abrasive cast-iron machining, so machining cycles remain smooth and repeatable. Compact geometry for flexible cutter integration and process reliability Featuring a round 12 mm plate form with a 15° free angle and T3 thickness, the insert offers compact geometry that is suitable for multi-edge indexing and versatile cutter designs. The tolerance class M ensures consistent interchangeability within tolerance-sensitive toolholders. Round-form inserts allow multiple cutting edges per index, increasing usable life before regrinding or replacement is required and enabling straightforward mounting strategies for production tooling where space and flexibility are priorities. The execution marked X corresponds to specific nominal dimensions and seating geometry, supporting predictable clearance and cutting engagement. Durable grade and economical machining for production environments The WKP35S grade is a modern coated carbide formulation optimised for broad material coverage and reliable edge stability. In practice, this means fewer interruptions from flank or crater wear and a more consistent surface finish across batches. For operations where process stability and repeatability are essential, the insert’s design contributes to reduced scrap rates and less process variation. The combination of coated carbide and an effective chipbreaker reduces the risk of tool-related downtime and supports a more economical machining strategy in mixed steel and cast-iron applications. Contact Metav Werkzeuge for specific recommendations on Walter Tools Tiger·tec Silver inserts and inform the team of the intended application to receive an individual machining suggestion at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: RDMX12T3M0T-A27-WKP35S-WALTER Article designation: RDMX12T3M0T-A27 WKP35S Product type: Indexable milling insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Applicable material groups: P / K Facts Plate diameter: 12 mm Thickness: T3 Free angle: 15° Tolerance class: M Plate form: Round Chipbreaker: A27 Execution: X Special features Coated carbide grade Stable chip control (A27) Suitable for steel (P) and cast iron (K) Compact round insert for multi-edge indexing Part of the Tiger·tec Silver family FAQ What materials is this insert intended for? The RDMX12T3M0T-A27 WKP35S insert is intended for machining steel (P) and cast iron (K) as defined by ISO 513. How does the Tiger·tec Silver series affect tool life? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and edge stability, which typically extends tool life and maintains cutting performance under elevated thermal loads. What advantages does the round 12 mm form offer? The round 12 mm form provides multiple indexable cutting edges and flexibility in cutter design; combined with a 15° free angle it supports reliable engagement and consistent chip control. Which chip control behaviour is expected from this insert? Chipbreaker A27 is engineered for stable chip formation in steel and cast iron, promoting short, controlled chips and reducing risk of chip entanglement in standard milling operations. What does the tolerance class M mean for production? Tolerance class M indicates a medium tolerance level that ensures consistent interchangeability and predictable seating in toolholders, supporting repeatable production quality. Manufacturer/Responsible: Walter Tools (Walter Deutschland GmbH); Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
RDMX12T3M0T-A27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coated carbide grade with a WPP35G composition and an optimised A27 chipbreaker for reliable steel machining; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data. RDMX12T3M0T-A27 WPP35G indexable milling insert — Tiger·tec Gold coated carbide for steel, round Ø12, Walter Tools The RDMX12T3M0T-A27 WPP35G is a round indexable insert engineered for milling steel, offering a combination of wear-resistant coating and a chipbreaker geometry tailored to stable chip formation in general-purpose and tougher machining tasks Tiger‑tec Gold coated carbide grade WPP35G Optimised A27 chipbreaker for steel machining 15° clearance angle for consistent chip flow Round insert Ø12 with T3 thickness for stability High-performance grade engineered for steel productivity The insert is based on the WPP35G grade within the Tiger·tec Gold family, a coated carbide formulation designed specifically for ISO group P (steel). The coating improves surface hardness and thermal resistance, which translates into longer tool life and fewer changeovers in serial production. By adopting a grade tuned to the heat and chip characteristics of steel, the component enables a more predictable machining process and reduced scrap rates compared with uncoated or general-purpose alternatives. Chip control and geometry that improve cycle stability A central benefit of the round design is repeatable chip formation: the A27 chipbreaker combines with the 15° clearance angle to channel chips away from the cutting zone and reduce re-cutting. This geometry supports a steady cut and helps to preserve the cutting edge under variable feed conditions, which is particularly useful in interrupted milling or mixed batch work. The result is improved surface finish and lower spindle load peaks, allowing higher average feeds while maintaining process security. Robustness, tolerance and consistent edge performance Constructed to a tolerance class M and a thickness of T3, the insert offers mechanical stability that aids repeatability across pockets and tool bodies. The round shape with a nominal diameter of 12 mm gives multiple indexed positions, so each insert provides several usable edges. This geometry, combined with the coated grade, yields good wear resistance and stable dimensional results across runs, supporting steady productivity and fewer toolholders to manage. Practical application and compatibility in workshop setups The insert is suitable for milling a wide range of steels including unalloyed and alloyed steels as defined by ISO P, making it a versatile choice for general machining shops and production environments. It is intended for use in standard indexable milling cutters accepting round inserts and can be combined with common tool clamping systems. The manufacturing grade is optimised to balance toughness and wear resistance, offering a reliable compromise when facing mixed steel batches or varying cutting conditions. The RDMX12T3M0T-A27 WPP35G performs well in both continuous and moderately interrupted milling operations. For process-secure milling with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for precise cutting data and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RDMX12T3M0T-A27-WPP35G-WALTER Label: Fräswendeschneidplatte RDMX12T3M0T-A27 WPP35G Walter Tools Product type: Indexable milling insert Facts Insert diameter: 12 mm Clearance angle: 15° Thickness: T3 Tolerance class: M Special features Round insert geometry Chipbreaker: A27 Coated carbide, Tiger·tec Gold technology Grade: WPP35G Material application: Steel (ISO P) Execution: X FAQ Which steels are best machined with this insert? The RDMX12T3M0T-A27 WPP35G is designed primarily for ISO group P materials, meaning unalloyed and alloyed steels; the WPP35G grade balances wear resistance and toughness for common steel machining tasks. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WPP35G grade increases thermal stability and surface hardness, resulting in improved tool life and more consistent performance when machining steel. How does the A27 chipbreaker influence cutting? The A27 chipbreaker promotes controlled chip formation and evacuation, which reduces the risk of built-up edge and enhances surface finish during both continuous and interrupted milling. Is the insert suitable for cutters with indexable round pockets? Yes, the round geometry and Ø12 size make the insert suitable for milling cutters designed for round indexable inserts, providing multiple indexing positions per insert. What are the key dimensional and tolerance details? Expect a 12 mm nominal diameter, T3 thickness and clearance angle of 15° with tolerance class M for consistent seating and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
RDMX1604M0T-A27 WKP25S WKP25S Wendeplatten - Walter Tools
Reliable machining performance for medium-duty milling, thanks to the combination of Tiger·tec Silver coating, the WKP25S grade and an efficient A27 chipbreaker—designed for stable chip formation and extended tool life. Order the milling insert directly via Metav Werkzeuge or ask our consultants for application advice. RDMX1604M0T-A27 WKP25S — Milling indexable insert, 15° clearance | Walter Tools RDMX1604M0T-A27 WKP25S is a round milling insert optimised for conventional and interrupted cuts in Stahl and Gusseisen, combining a robust substrate with Tiger·tec Silver coating for consistent performance Tiger·tec Silver coating for long tool life Optimised for Stahl and Gusseisen machining Round 16 mm form for flexible indexing 15° clearance angle for secure cutting High productivity through coating and chip control The Tiger·tec Silver technology delivers a coated carbide surface that balances wear resistance and thermal stability. This results in more predictable tool life and fewer indexings during a shift, which directly improves machining throughput. Combined with the WKP25S grade, the insert is tuned for the heat and chip behaviour typical of unalloyed and alloyed Stahl as well as abrasive cast materials. The integrated A27 chipbreaker ensures reliable chip evacuation in varying cut conditions, reducing downtime for manual chip handling and minimising the risk of rework. Precise geometry for repeatable results A consistent cutting geometry is essential for surface finish and dimensional control. The round 16 mm form with a 15° clearance provides a stable cutting edge contact and smooth engagement during entry and exit. The insert’s tolerance class M supports repeatable seating in typical milling holders, ensuring that each index position maintains cutting integrity. For shops seeking dependable finishing without complex parameter changes, this geometry offers a straightforward setup and less variance between cycles. Application flexibility and handling benefits The grade and series make this insert suitable across a range of common workshop tasks: from roughing in interrupted castings to semi-finishing components in Stahl. The plate format allows multiple cutting edges per insert, lowering tooling costs per part and simplifying inventory. The round form increases the number of usable edges and provides flexibility in approach angles. For procurement and process planning, the insert ships as a ready-to-fit indexable plate that integrates with standard milling toolholders designed for round inserts. Contact Metav Werkzeuge for an application check, availability and to order genuine Walter Tools Tiger·tec Silver inserts — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical Data Article number: RDMX1604M0T-A27-WKP25S-WALTER Designation: RDMX1604M0T-A27 WKP25S Type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Size: 16 mm Plate thickness code: 04 Clearance angle: 15° Plate form: Round Chipbreaker: A27 Tolerance class: M Special features Grade: WKP25S Substrate/coating: Tiger·tec Silver (coated carbide) Material suitability: Stahl, Gusseisen Execution: X FAQ What materials is this insert designed for? The RDMX1604M0T-A27 WKP25S insert is designed primarily for machining Stahl and Gusseisen, with the WKP25S grade optimised for the chip and wear conditions typical of those groups. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the insert reduces abrasive and thermal wear, so the Walter Tools insert maintains cutting performance longer and supports higher productivity with fewer tool changes. Which chipbreaker is fitted and what is its advantage? The insert uses an A27 chipbreaker, which promotes reliable chip control across both continuous and interrupted cuts, reducing the risk of recutting and improving surface quality. Is this insert suitable for interrupted milling? Yes, the round format and robust WKP25S grade make the insert well suited to interrupted milling in cast parts and variable engagement typical in such operations. How many usable cutting edges does the round insert provide? The round 16 mm form allows multiple index positions; specific edge counts depend on the holder used but the geometry is chosen to maximise usable edges for cost-effective machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for clarification purposes only. There is no affiliation implied between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com