ROMX10T3M0T8-A27 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coated carbide grade and round geometry for reliable chip control and extended cutting-edge life; order the ROMX10T3M0T8-A27 WKP35S directly via Metav Werkzeuge or ask the consultants for application advice. ROMX10T3M0T8-A27 WKP35S — Round milling insert, Tiger‑tec Silver (Walter Tools) The ROMX10T3M0T8-A27 WKP35S is a round milling insert engineered for machining steel and cast iron, applying the Tiger‑tec Silver coated carbide grade to deliver consistent wear resistance and stable chip formation in productive milling operations. Tiger‑tec Silver coated grade WKP35S Optimised for steel and cast iron Round insert geometry for stable cutting Reliable chip control with A27 chipbreaker High wear resistance for consistent production The combination of Tiger‑tec Silver technology and coated carbide construction provides pronounced wear resistance and preserved cutting performance over extended runs. The coating minimises abrasive and adhesive wear while the substrate maintains toughness under intermittent loads. For production environments demanding reproducible tool life, this cutting grade reduces tool changes and contributes to steadier cycle times. The result is fewer interruptions and more predictable machining schedules, particularly when processing medium- to high-strength steels. Material compatibility that matches ISO groups P and K Designed for the machining of steel (ISO group P) and cast iron (ISO group K), the cutting grade is adapted to the heat and chip characteristics typical for these materials. Steel machining benefits from the grade's thermal stability, while cast iron operations profit from optimised resistance to abrasive wear and the management of short, breaking chips. The designation P / K indicates suitability across these groups and helps selecting processes in multi-material production environments where one insert type must serve varied workpieces. Geometry and chip control that reduce rework The round geometry of the insert, combined with the A27 chipbreaker, promotes steady engagement and controlled chip evacuation. A round form increases resistance to impact and enables comfortable entry into interrupted cuts, while the chipbreaker shapes the chip curl to prevent entanglement and tool nose heat build-up. These geometric features improve surface finish and reduce the need for secondary operations, offering a tangible gain in productivity and quality for batch production and flexible milling tasks. Practical features for reliable integration in tool systems Manufactured to tolerance class M with size 10 and thickness T3, the insert fits standard round-insert milling pockets and toolholders that accept the ROMX designation. The execution marked as X denotes the specific geometrical variant within the series. The WKP35S grade is part of the Tiger‑tec Silver family and is intended to offer a balance between tool life and consistent performance, particularly in mixed-production shops where process security and repeatability are priorities. For tailored application recommendations or a quotation for the Walter Tools ROMX10T3M0T8-A27 WKP35S insert, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ROMX10T3M0T8-A27-WKP35S-WALTER Label: Fräswendeschneidplatte ROMX10T3M0T8-A27 WKP35S Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S ISO designation: ROMX10T3M0T8-A27 WKP35S UID: ROMX10T3M0T8-A27-WKP35S-WALTER Facts Size: 10 Thickness: T3 Tolerance class: M Special features Coated hardmetal (coated carbide) Material groups: P / K (steel, cast iron) Shape: Round Chipbreaker: A27 Execution: X Series description: Tiger·tec Silver Material code: P / K FAQ What materials is this insert suitable for? The ROMX10T3M0T8-A27 WKP35S is specified for steel (ISO group P) and cast iron (ISO group K), reflecting the P / K material designation. Which chipbreaker is fitted to this insert? The insert uses the A27 chipbreaker, designed to promote controlled chip formation and safe evacuation in milling. What are the key dimensional specifications of the insert? The insert is listed as size 10 with thickness T3 and a tolerance class of M, matching common round-insert toolholders. Which series and grade does the insert belong to? This item is part of the Tiger‑tec Silver series and the cutting grade is WKP35S, a coated carbide grade tailored for production reliability. Is this an original Walter Tools product? The ROMX10T3M0T8-A27 WKP35S is offered as an original factory-new Walter Tools milling insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are used for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The item offered is an original, brand-new product from the manufacturer.
ROMX1204M0-D57 W3536 W3536 Wendeplatten - Walter Tools
Take advantage of the combination of proven Walter Tools grade performance, the D57 chipbreaker for controlled chip flow and the compact size 12 / thickness 04 geometry for reliable milling cycles; order the insert directly via Metav Werkzeuge or consult the technical team for application matching. ROMX1204M0-D57 W3536 — Round milling insert, D57 chipbreaker (Walter Tools) The ROMX1204M0-D57 W3536 is a round milling insert designed for industrial milling applications, offering robust chip control and stable cutting-edge performance in general metalcutting operations. Walter W3536 grade for reliable edge life Round insert with D57 chipbreaker for stable chips Size 12 and thickness 04 for consistent tolerance Faster cycles through controlled chip formation The combination of the W3536 grade and the chipbreaker D57 prioritises consistent chip geometry, which supports uninterrupted machining and reduced tool-change frequency. The round geometry of the insert provides a resilient cutting edge that absorbs radial forces and helps maintain cut stability. These technical qualities translate into measurable improvements in process reliability and throughput, especially in production setups where predictable cycle times are critical. Clear specification and application guidance for flexible use With a catalog-dependent base material specification, the insert is suitable for integration into a wide range of tool bodies and machining strategies; the material matrix within Walter documentation determines the optimal workpiece matches. The simple designation and ISO-style naming make procurement and tool management straightforward, while the tolerance class M and execution X ensure consistent interchangeability within precision tool systems, supporting standardised industrial processes. Features that sustain long tool life and surface consistency The engineering behind the Walter grade aims at stable chip formation and a durable cutting edge, enhancing both tool life and part quality. The insert’s specification—round form, D57 chipbreaker and compact size 12—is intended to reduce vibration sensitivity and assist in producing repeatable surface finishes. These attributes contribute to reduced rework and improved overall equipment effectiveness, which are decisive factors for production-oriented operations. Practical next steps and technical checks before implementation Before integrating this insert into a specific operation, verify the Walter product matrix for the intended workpiece material and cutting parameters. The designation ROMX1204M0‑D57 W3536 provides a concise reference for matching holder systems and insert seatings. For companies seeking to standardise a production cell or to refine machining parameters, the technical documentation and consultant input help align the insert’s strengths with machining goals and cutting data. Contact Metav Werkzeuge for application advice or to request the ROMX1204M0-D57 W3536 insert and technical matching to production requirements Technical data Article number: ROMX1204M0-D57-W3536-WALTER Description: Fräswendeschneidplatte ROMX1204M0-D57 W3536 Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Grade: W3536 Chipbreaker: D57 Insert form: Rund Execution: X Base designation: ROMX1204M0-D57 ISO designation: ROMX1204M0-D57 W3536 Material: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Storytrigger: wendeplatten FAQ What materials is this insert intended for? The ROMX1204M0‑D57 W3536 should be matched against the Walter material matrix; the insert’s material is catalog-dependent, so suitability must be checked in the manufacturer’s documentation. How does the D57 chipbreaker influence machining? The D57 chipbreaker on the ROMX1204M0‑D57 W3536 promotes controlled chip breakage and evacuation, supporting stable cutting and reducing interruptions in continuous milling operations. Why choose a round insert form? A round insert provides a stronger cutting edge and higher resistance to cutting forces; the ROMX1204M0‑D57 W3536 benefits from this geometry when process robustness and vibration damping are priorities. What does tolerance class M mean for tool set-up? Tolerance class M indicates a medium tolerance standard for the insert seat and interchangeability; when using ROMX1204M0‑D57 W3536, ensure holders and seats conform to this class for accurate positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
ROMX1204M0-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP35G grade for productive machining of steel and cast iron; the round 12 insert with chipbreaker D57 ensures consistent chip control and stable cutting performance. Order the insert via Metav Werkzeuge or consult their technical team for application support. ROMX1204M0-D57 WKP35G milling insert — Walter Tools The ROMX1204M0-D57 WKP35G is a round milling insert designed for productive machining of steel and cast iron, using the Tiger‑tec Gold coating technology. Tiger‑tec Gold coating for long tool life WKP35G grade for steel and cast iron Round 12 insert with thickness code 04 Chipbreaker D57 for stable chip control Consistent productivity for steel and cast iron The combination of the Tiger‑tec Gold series and the WKP35G grade delivers a balance of wear resistance and edge stability tailored to steel (P) and cast iron (K) applications. The coating technology reduces adhesive and abrasive wear, which translates into longer productive intervals and fewer insert changes. For manufacturing environments where process reliability and repeatable component quality are priorities, this insert supports sustained cutting performance and predictable tool life. Stable chip control and surface quality Equipped with a D57 chipbreaker and a round geometry, the insert assists in controlled chip formation during milling operations. Stable chips reduce the risk of tool damage and improve surface finish on workpieces made from common engineering materials. The geometry supports consistent contact conditions, which helps to maintain dimensional accuracy and decreases the need for rework, contributing to more efficient machining cycles. Easy integration into existing toolholders and operations The insert’s designation and form factor correspond to common toolholder systems, enabling straightforward tool setup and replacement. The WKP35G sort is a coated carbide composition developed for robust cutting edges under typical steel and cast iron cutting temperatures and chip behaviour. Using standard clamping systems minimises downtime during tool changes and streamlines inventory management in production shops. Application guidance and process advantages Designed for catalogue- and geometry-dependent main applications in steel and cast iron, the grade performs well across a wide range of cutting conditions. The WKP35G composition and Tiger‑tec Gold coating promote stable flank wear and reliable surface integrity. For process optimisation, pairing the insert with appropriate feed and speed parameters and stable workholding yields the best compromise between productivity and tool life. For ordering and tailored process advice on Walter Tools inserts in the Tiger‑tec Gold range, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and application recommendations Technical Data Article number: ROMX1204M0-D57-WKP35G-WALTER Name: Fräswendeschneidplatte ROMX1204M0-D57 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Size: 12 Thickness code: 04 Tolerance class: M Chipbreaker: D57 Special features Series: Tiger‑tec Gold Grade: WKP35G (coated carbide) Material groups: P (steel), K (cast iron) Insert form: Round Execution: X FAQ What materials is this insert suitable for? The ROMX1204M0-D57 WKP35G is intended for steel (P) and cast iron (K) machining, reflecting the grade characteristics of WKP35G within the Tiger‑tec Gold series. What is the function of the D57 chipbreaker? The D57 chipbreaker on this round insert promotes controlled chip segmentation and evacuation, improving chip control and surface finish during milling of steel and cast iron. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold offers a combination of improved wear resistance and edge security, allowing the WKP35G grade to maintain cutting performance under the thermal and mechanical loads typical of steel and cast iron cutting. Is this insert compatible with standard toolholders? The ROMX1204M0-D57 WKP35G follows common indexable insert geometries and can be used in compatible holders designed for this insert form and size. What does the thickness code 04 indicate? The thickness code 04 denotes the insert thickness class used in tooling specifications; consult the toolholder documentation to confirm compatibility with the ROMX1204M0-D57 WKP35G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1204M0-D57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance and broad material coverage provided by this milling insert. The coated WKP35S grade and Tiger·tec Silver technology deliver stable chip formation and extended tool life, supporting productive milling of steel and cast iron. Order the insert via Metav Werkzeuge or request application advice from their consultants. ROMX1204M0-D57 WKP35S — Round milling insert with Tiger·tec Silver coating, Walter Tools A ROMX1204M0-D57 WKP35S round milling insert designed for productive milling of steel and cast iron, offering a robust coated-carbide grade and a D57 chipbreaker for controlled chip formation Tiger·tec Silver coating for high wear resistance WKP35S grade optimised for steel and cast iron Round form for axial versatility Stable chip control with D57 breaker Increased productivity through coated-carbide technology The Tiger·tec Silver coating and the WKP35S coated-carbide grade combine to provide substantially improved wear resistance and consistent cutting performance. This technology reduces flank and crater wear under typical milling conditions, which helps maintain dimensional accuracy over longer tool life. For production environments where downtime is critical, the insert's coating supports higher cutting speeds and reliable edge stability, translating into fewer index changes and a steadier process. Reliable chip control and process stability for heavy cuts Equipped with the D57 chipbreaker, the insert ensures controlled fragmentation of chips when machining steels and cast irons (ISO groups P and K). The breaker geometry is optimised for stable chip flow, lowering the risk of chip accumulation and machine downtime. As a round insert, it enables multi-directional cutting and can suit both slotting and shoulder operations where a predictable chip evacuation pattern improves surface finish and operator safety. Practical specification and workshop advantages The insert is supplied in the ROMX1204M0-D57 geometry with size designation 12 and thickness 04, tolerance class M and execution X, providing a balance between strength and accessibility for a range of milling cutters. Compatibility with a broad spectrum of steel and cast-iron applications makes this insert a flexible choice for job shops and production lines seeking a cost-effective, reproducible cutting solution. The round shape further supports stable engagement and even wear distribution across the cutting edge. Contact Metav Werkzeuge for tailored cutting data and to discuss the ROMX1204M0-D57 WKP35S from Walter Tools for optimised milling performance Technical Data SKU: ROMX1204M0-D57-WKP35S-WALTER Designation: ROMX1204M0-D57 WKP35S Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Core data Size: 12 Thickness: 04 Chipbreaker: D57 Tolerance class: M Material suitability: P / K Special features Series: Tiger-tec Silver Grade: WKP35S (coated carbide) Shape: Round Execution: X Label: Fräswendeschneidplatte ROMX1204M0-D57 WKP35S Walter Tools FAQ What materials is this insert designed to machine? The ROMX1204M0-D57 WKP35S is formulated for machining steel (P) and cast iron (K) in accordance with ISO material groupings, with the WKP35S grade tuned for those applications. How does the Tiger·tec Silver coating benefit cutting performance? Tiger·tec Silver on the WKP35S grade improves wear resistance and thermal stability during milling, which helps to extend the service life of the insert and maintain consistent surface quality. What is the role of the D57 chipbreaker? The D57 chipbreaker provides controlled chip formation and evacuation when milling steels and cast irons, reducing the likelihood of chip build-up and improving process reliability. Is the round form suitable for different milling operations? Yes, the round shape of this insert offers axial flexibility and even wear distribution, making it suitable for a variety of milling tasks including slotting and shoulder milling. Which product designation should be used when ordering or requesting data? Refer to the full designation ROMX1204M0-D57 WKP35S (SKU ROMX1204M0-D57-WKP35S-WALTER) when ordering or requesting cutting data to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1204M0-D57 WMP45G WMP45G Wendeplatten - Walter Tools
Take advantage of reliable machining of stainless steel with a coated carbide grade designed for stable chip formation and long tool life; the insert’s chipformer D57 improves process security while the compact Ø12 mm / 4.0 mm geometry supports precise, productive milling — order directly via Metav Werkzeuge or request application advice from the consultants. ROMX1204M0-D57 WMP45G milling insert by Walter Tools — Tiger·tec Gold for stainless steel machining A ROMX1204M0-D57 WMP45G round milling insert engineered for medium to robust stainless-steel applications, combining Walter Tools’ Tiger·tec Gold technology with a D57 chipformer for secure chip control in demanding conditions Tiger·tec Gold coating for stable cutting edge Optimised chipformer D57 for secure chip control Round insert Ø12 mm, 4.0 mm thickness Proven cutting performance for stainless-steel operations The coated carbide grade WMP45G is tailored for machining stainless steel and similar ISO M materials, where toughness and a tendency to build up on the tool can challenge process stability. The Tiger·tec Gold coating provides improved heat resistance and wear properties, which promotes a stable cutting edge and reduces the frequency of insert changes. This leads to predictable tool life and fewer interruptions in production, making the component a rational choice where machining reliability and reproducible results are priorities. Secure chip control and reliable geometry for productive milling Round geometry together with the D57 chipformer supports reliable chip breakage and evacuation during interrupted cuts and continuous milling alike. The compact design (Ø12 mm with a 4.0 mm thickness) permits use in small to medium toolholders while maintaining sufficient edge strength for medium to robust cutting parameters. The chipbreaker works by shaping the chip flow to avoid long, stringy chips that can damage the workpiece or tool, thereby improving surface finish and reducing the likelihood of built-up edge on the coated carbide grade. Engineered for process efficiency and repeatability Tolerance class M and the overall insert design enable consistent seating and stable repeatability in appropriate holder systems. The insert’s construction supports efficient changeover and predictable behaviour under elevated temperatures typical of stainless-steel cutting. By choosing a grade optimised for these conditions, workshops benefit from greater process security, reduced scrap rates and improved productivity — a technical investment that quickly shows returns through lower downtime and steadier part quality. For application support with Walter Tools’ Tiger·tec Gold inserts or tailored recommendations for stainless-steel milling, contact Metav Werkzeuge for expert advice via e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav Werkzeuge can recommend suitable toolholders and cutting parameters for the ROMX1204M0-D57 WMP45G insert Technical data Article number: ROMX1204M0-D57-WMP45G-WALTER Label: Fräswendeschneidplatte ROMX1204M0-D57 WMP45G Walter Tools Product type: Milling indexable insert Grade: WMP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Insert designation: ROMX1204M0-D57 WMP45G Facts Diameter: 12 mm Thickness: 4.0 mm Chipformer: D57 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Application group: ISO M (rostfreie Stähle / stainless steel) Insert form: Round Designation without grade: ROMX1204M0-D57 Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The WMP45G grade is formulated for stainless steel (ISO M); the ROMX1204M0-D57 insert is intended to handle the toughness and heat generation typical of these alloys. Is the insert coated and what benefit does the coating provide? Yes — the Tiger·tec Gold coating on the WMP45G insert improves heat resistance and wear performance, which helps to maintain a stable cutting edge and extend effective tool life. What are the key dimensions and geometry of the insert? The insert is a round geometry with Ø12 mm and 4.0 mm thickness and features the D57 chipformer to control chip formation during milling. How does the D57 chipformer influence machining results? The D57 chipformer shapes and breaks chips to avoid long, stringy swarf, improving chip evacuation and surface finish while reducing built-up edge risk in stainless-steel milling. Is this insert suitable for interrupted cuts and general face milling? The round insert geometry and robust grade make it appropriate for many milling tasks, including interrupted cuts and face milling, under medium to robust cutting conditions. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original factory-new product from the manufacturer (Walter Tools).
ROMX1204M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP35G grade for extended tool life and consistent chip control in steel machining; order the insert via Metav Werkzeuge or ask the consultants for application-specific advice. ROMX1204M0-D57 WPP35G milling indexable insert — round, for steel, Walter Tools The ROMX1204M0-D57 WPP35G is a round milling insert engineered for productive steel machining with Tiger‑tec Gold coating and a D57 chipbreaker. Tiger‑tec Gold coated for extended life WPP35G grade for productive steel machining Round geometry ROMX1204 for stable cutting D57 chipbreaker for consistent chip control Proven coating and grade for longer tool life The combination of the Tiger‑tec Gold coating and the WPP35G grade provides a reliable balance between wear resistance and toughness, which translates into longer tool life and fewer indexings in medium to high duty steel operations. As a coated carbide solution optimised for ISO group P (steel), this grade mitigates abrasive wear while still coping with the thermal and mechanical loads typical of steel turning and milling. The primary benefit is improved process uptime and lower tooling costs per component when compared with uncoated or less optimised grades. Round insert geometry and chip control for stable performance The round form and dedicated D57 chipbreaker deliver a stable contact geometry that supports smooth cutting forces and predictable chip formation. This geometry reduces vibration and distributes cutting stress evenly across the cutting edge, which helps maintain surface quality and extend cutter life. The ROMX-style configuration emphasises reliability in interrupted cuts and trochoidal milling strategies, offering stable cutting behaviour in dynamic machining cycles and when machining variable cross-sections. Process reliability, tolerance and practical selection tips With tolerance class M and the specified execution, the insert supports repeatable seating and stable clamping in standard milling cutters. Selection of the WPP35G grade helps achieve consistent results across a wide range of unalloyed and alloyed steels by focusing on wear control and a robust cutting edge. For optimised tool life, pair the insert with appropriate cutter bodies rated for ROMX inserts and select feeds and speeds aligned with the workpiece hardness and machining strategy. For additional material lists and application examples, technical consultants at Metav Werkzeuge can provide tailored recommendations. For application guidance on the Walter Tools Tiger‑tec Gold WPP35G inserts and to discuss cutter-body compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for individual advice Technical data SKU: ROMX1204M0-D57-WPP35G-WALTER Designation: ROMX1204M0-D57 WPP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Insert diameter: 12 mm Thickness: 4 mm Chipbreaker: D57 Tolerance class: M Series: Tiger‑tec Gold Special features Grade: WPP35G Coating: coated carbide Shape: Round Material suitability: Steel (ISO P) Execution: X FAQ What materials is this insert designed for? The insert is specified for steel applications (ISO P); the WPP35G grade and Tiger‑tec Gold coating make it particularly suited to unalloyed and alloyed steels. What is the chipbreaker designation and its purpose? The D57 chipbreaker is integrated to promote consistent chip control and reduce the risk of long, stringy chips during milling. What are the key geometry details of the insert? This is a round insert with a diameter of 12 mm and a thickness of 4 mm, engineered for stable cutting and even edge loading. Which Walter Tools product series does this belong to? The insert is part of the Tiger‑tec Gold series and carries the WPP35G grade for balanced wear resistance and toughness. How is repeatability ensured in the tool system? Tolerance class M and the ROMX seating geometry support consistent clamping and repeatable positioning in compatible cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1204M0-D57 WSM35G X Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a stable WSM35G grade and precise round geometry for consistent chip control and extended edge life; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. ROMX1204M0-D57 WSM35G Fräswendeschneidplatte by Walter Tools — Tiger·tec Gold coated, for rostfreier Stahl and high-temperature alloys ROMX1204M0-D57 WSM35G is a round milling indexable insert designed for demanding machining of rostfreier Stahl and heat-resistant superalloys, offering robust edge stability and proven Tiger·tec Gold coating performance Tiger·tec Gold coated grade WSM35G Round geometry for multi-edge use Chipbreaker D57 for controlled chip flow Tolerance class M for repeatable results Consistent performance on tough alloys The WSM35G grade, part of the Tiger·tec Gold series, is a coated carbide developed for applications with high thermal loads and material adhesion tendencies. In practice this means reliable cutting when machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S). The coating improves wear resistance and reduces built-up edge, which supports stable production runs and extends the interval between tool changes. For operations where tool life and process security matter, the coated substrate contributes to measurable productivity gains. Why round inserts reduce downtime A round insert form provides multiple effective cutting edges and inherent strength at the nose, making the geometry particularly forgiving under variable cutting conditions. Combined with the D57 chipbreaker, the insert channels swarf reliably, helping to avoid clogging and reducing machine stops. The compact geometry suits pocketing, ramping and heavy-interrupted cuts where consistent chip formation translates directly to fewer interventions and more continuous machining. Practical benefits from tolerancing and design The toleranzklasse M classification ensures dimensional consistency across batches, which supports predictable seating and runout control in receptacles and toolholders. Consistent fitment reduces set-up time and the need for frequent checking, delivering savings in both labour and measurement overhead. The combination of grade and tight tolerance aids in achieving reproducible surface finish and part tolerances over longer tool life. Clear advantages for production planning The component’s measured attributes — size 12 and thickness 04 — allow planners to match insert inventories precisely to holder systems and cutting strategies. Specifying the correct chipbreaker and insert shape reduces recipe development time on new parts, while the robust coated substrate allows for higher cutting speeds in many cases, improving throughput without compromising edge stability. Application scope and recommended uses This indexable insert is suitable for job shops and production environments addressing rostfreier Stahl and high-temperature alloys in sectors such as energy, aerospace and heavy engineering. The WSM35G alloy support makes the insert well suited to operations that require secure chip formation and a balance between wear resistance and substrate toughness. The design is optimised for productive roughing and general-purpose finishing where a stable edge and coating performance are required. Integration and support for machining teams When integrating the insert into existing tool systems, confirm holder compatibility and seating for the round geometry to exploit multiple indexing positions. Technical advice is available for process parameters and application windows to help achieve the best balance between cutting speed, feed and tool life. The ROMX1204M0-D57 WSM35G insert performs well as part of a structured tooling strategy that prioritises uptime and consistent part quality. For application-specific guidance or to reserve the ROMX1204M0-D57 WSM35G from Walter Tools, contact Metav Werkzeuge for tailored recommendations and procurement support. Technical Data SKU: ROMX1204M0-D57-WSM35G-WALTER Product: Milling indexable insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Facts Size: 12 Thickness: 04 Tolerance class: M Shape: Round Chipbreaker: D57 Execution: X Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: S / M Suitable for rostfreier Stahl: yes Designation: ROMX1204M0-D57 Label: Fräswendeschneidplatte ROMX1204M0-D57 WSM35G Walter Tools FAQ What materials are recommended for this insert? The ROMX1204M0-D57 WSM35G is recommended for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S) due to its Tiger·tec Gold coated carbide composition. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and evacuation, improving process stability when using the round insert in interrupted or continuous cuts. Is the insert compatible with standard round insert holders? The round geometry and execution X are intended for round-insert holders; match the insert size 12 and thickness 04 to compatible toolholders for secure seating. What does the tolerance class M mean for production? Tolerance class M indicates consistent dimensional accuracy that supports repeatable seating and reduced setup variation across batches. Can this insert be used for finishing operations? Yes, depending on geometry and cutting parameters, the coated grade and stable edge make it suitable for finishing as well as robust roughing strategies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and imply no affiliation between our company and the named manufacturers. The described item is an original, new product from the stated manufacturer.
ROMX1204M0-D57 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade engineered for heat resistance, a dedicated D57 chipbreaker for controlled swarf formation, and the round ROMX geometry that delivers robust process security in interrupted or difficult cuts. Order the insert directly via Metav Werkzeuge or consult the team for application advice. ROMX1204M0-D57 WSM45X milling indexable insert – coated carbide for stainless steel and superalloys (Walter Tools) ROMX1204M0-D57 WSM45X is a round milling insert engineered for heavy-duty machining of stainless steels and heat-resistant superalloys, providing stable cutting edges and reliable chip control for demanding applications Coated carbide grade WSM45X for heat resistance Optimised chip control with D57 chipbreaker Round ROMX geometry for high process security Suitable for stainless steel and superalloys High-performance carbide for challenging materials The coated carbide composition of the WSM45X grade is designed to withstand elevated cutting temperatures and abrasive conditions encountered when machining stainless steel and heat-resistant superalloys. The coating reduces adhesion and wear on the cutting edge, which in turn supports stable cutting-edge life and consistent tool performance. For production environments where component integrity and repeatable results matter, this insert offers a balance between wear resistance and edge toughness, allowing for sustained machining without frequent index changes. The combination of grade and coating ensures predictable results when tackling materials that tend to work-harden or generate built-up edge. Precise chip control for improved surface and productivity The D57 chipbreaker geometry has been optimised to promote manageable swarf and minimise disruptive long chips. Controlled chip formation not only improves operator safety and downstream handling but also reduces thermal peaks at the cutting edge, contributing to a better surface finish and fewer interruptions for chip clearance. In many operations, this leads to higher effective material removal rates and reduced cycle variability. The chip management design supports both continuous and semi-interrupted cuts, making the insert a practical choice where consistent surface quality and process repeatability are required. Geometry that increases process security in interrupted cuts The round ROMX form delivers mechanical robustness and a favourable distribution of cutting forces, which is particularly valuable in interrupted or unstable cutting conditions. The radial geometry reduces the risk of localised edge failure and offers a forgiving contact profile when engaging complex contours or interrupted surfaces. Combined with the tolerance class M and the specified plate thickness, the insert supports reliable clamping and repeated indexing, improving uptime and reducing the risk of assembly-related tolerance issues in production tooling systems. Compatibility, handling and application overview The ROMX1204M0-D57 design with execution X and plate size 12 makes the insert compatible with a wide range of indexable milling pockets and toolholders designed for round inserts. The S / M material suitability indicates effective performance across heat-resistant superalloys and stainless steel, enabling flexible deployment across different workpiece families with the same tool body. For operators and process planners, the predictable wear characteristics and stable chip formation translate into simplified setup, fewer interruptions and a focus on throughput rather than frequent tool changes. Discuss application requirements with Metav Werkzeuge to identify the optimal Walter Tools coated carbide insert for specific materials and cutting conditions – contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: ROMX1204M0-D57-WSM45X-WALTER Label: Fräswendeschneidplatte ROMX1204M0-D57 WSM45X Walter Tools Product type: Fräswendeschneidplatte Grade: WSM45X Form: Round (ROMX) Chipbreaker: D57 Plate size: 12 Plate thickness: 04 Tolerance class: M Execution: X Series: Walter Schneidstoffsorte - Serie offen Material suitability: S / M ISO designation: ROMX1204M0-D57 WSM45X Facts Plate diameter: 12 Thickness designation: 04 Tolerance: M Special features Coated carbide grade WSM45X Optimised D57 chipbreaker for swarf control Suitable for stainless steel (M) and superalloys/titanium (S) Round geometry for interrupted cuts and process security Designed for stable cutting-edge behaviour and predictable wear FAQ What materials are best machined with this insert? The ROMX1204M0-D57 WSM45X insert is intended primarily for stainless steel (ISO group M) and heat-resistant superalloys or titanium (ISO group S), with the WSM45X coating supporting heat resistance and edge stability. How does the D57 chipbreaker help in production milling? The D57 chipbreaker on the ROMX1204M0-D57 promotes controlled chip formation, which improves surface finish and reduces the likelihood of long, entangling swarf during milling operations. Is the ROMX geometry suitable for interrupted cutting conditions? Yes, the round ROMX form provides a robust contact profile and distributes cutting forces effectively, making the insert well suited to interrupted cuts and operations with varying engagement angles. Can this insert be used on standard indexable milling holders? The ROMX1204M0-D57 follows common indexable insert dimensions for round forms; compatibility depends on the specific holder pocket, but the design supports widespread application in appropriate tool bodies. What benefits does the WSM45X grade offer compared with uncoated grades? WSM45X is a coated carbide grade optimised for elevated temperatures and work-hardening materials; compared with uncoated grades it provides improved wear resistance, reduced adhesion and longer effective edge life under demanding cutting conditions. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer (Walter Tools).
ROMX1204M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the versatile WSP45G grade for consistent tool life and reliable chip control in mixed-material milling; order the ROMX1204M0-D57 insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. ROMX1204M0-D57 WSP45G milling indexable insert — Tiger·tec Gold for steel, stainless steel and superalloys (Walter Tools) ROMX1204M0-D57 WSP45G is a round milling insert engineered for robust, versatile milling across a broad range of materials, including steels, stainless steel and heat-resistant superalloys Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Round 12 mm insert with D57 chipbreaker Stable cutting edge, tolerance class M Improved process reliability when machining mixed materials The combination of the WSP45G grade and Tiger·tec Gold coating delivers improved wear resistance and predictable cutting behaviour across diverse workpiece materials. Designed for the common thermal and mechanical stresses encountered when machining steel (P), stainless steel (M) and superalloys/titanium (S), this insert balances toughness and hardness to reduce edge chipping and support consistent chip formation. The result is fewer unplanned tool changes and a steadier production flow, which supports leaner machining processes and reduced downtime. Precision chip control and stable cutting performance The circular geometry and integrated chipbreaker D57 promote compact, controllable chips that ease evacuation during both up‑cut and down‑cut milling. With tolerance class M and a compact insert thickness, the component ensures repeatable seating in toolholders and predictable radial runout, enhancing surface finish and dimensional consistency. These characteristics support efficient heat dissipation at the cutting edge and help maintain a stable cutting edge over longer tool lives, contributing directly to higher overall process reliability. Productivity-oriented design for economical milling Built for productive milling operations, the insert’s coating and substrate combination prioritises a long usable edge life while maintaining good surface quality in finishing passes. The PVD-coated cutting grade is optimised for a range of cutting speeds, enabling higher material removal rates with controlled wear. For manufacturers seeking a balance between throughput and part quality, this solution offers measurable gains in machining efficiency and repeatability, particularly in mixed-material production environments. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and request availability of ROMX1204M0-D57 WSP45G — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data Article number: ROMX1204M0-D57-WSP45G-WALTER Article name: Fräswendeschneidplatte ROMX1204M0-D57 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade / series: WSP45G / Tiger·tec Gold Core data Insert size: 12 Insert thickness: 04 Chipbreaker: D57 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Applicable materials: P / M / S Plate form: Round Substrate: P / M / S suitable carbide grade Series designation: Tiger·tec Gold FAQ What materials can this insert machine effectively? The ROMX1204M0-D57 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys/titanium, reflecting its P / M / S designation and the versatile WSP45G grade. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and heat tolerance, which helps to extend edge life and maintain consistent cutting performance in continuous milling. What role does the D57 chipbreaker play in performance? The chipbreaker D57 produces compact, manageable chips that ease evacuation and reduce the risk of re‑cutting, supporting cleaner surface finishes and steadier tool life during both roughing and finishing. Is this insert interchangeable with common round milling holders? The round plate form and the defined tolerance class M ensure predictable seating in compatible round‑insert milling toolholders; however, holder compatibility should be verified against the toolholder’s clamping system and seat design. Can the ROMX1204M0-D57 WSP45G be used for both roughing and finishing? Yes, the combination of the WSP45G grade and the Tiger·tec Gold coating is designed to offer a compromise between toughness and wear resistance suitable for productive roughing and quality finishing, depending on cutting parameters. How does tolerance class M affect machining accuracy? Tolerance class M indicates medium dimensional tolerance, providing a reliable fit and repeatability in tool assemblies which contributes to consistent surface quality and dimensional control. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the brand owners; the item offered is an original, factory‑new product from the specified manufacturer.
ROMX1204M0-D67 WMP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP45G grade for secure chip formation and longer tool life when machining stainless steel; order directly via Metav Werkzeuge or contact our consultants for application advice. ROMX1204M0-D67 WMP45G – Round milling insert for stainless steel by Walter Tools ROMX1204M0-D67 WMP45G is a round milling insert designed for reliable machining of stainless steel, combining Tiger·tec Gold coating with a D67 chipbreaker for secure chip control Tiger·tec Gold coating for extended tool life WMP45G grade for stainless steel applications Round insert Ø12 with chipbreaker D67 Consistent edge stability from Walter Tools Improve process reliability when machining stainless steel The combination of Tiger·tec Gold technology and the WMP45G grade provides a stable cutting edge and improved wear resistance when working with stainless steel. The insert is a coated carbide solution engineered to reduce built-up edge and manage heat generation; this leads to fewer interruptions for edge changes and a steadier production rhythm. For shops targeting repeatable quality, the design reduces the risk of unexpected tool failure and supports predictable machining cycles. Better chip control and consistent surface finish The chipbreaker D67 and the geometry of the round insert work together to shape chips reliably and evacuate them from the cutting zone. A well-designed chipbreaker reduces re-cutting of chips and lowers the chance of surface damage, which in turn shortens finishing passes. For users with limited experience in insert selection, the chipbreaker function simplifies process setup: it channels chips into manageable forms and helps deliver a consistent surface quality on each pass. Operational benefits that reduce downtime and costs Manufactured by Walter Tools to a medium tolerance class, the insert is sized for flexible milling applications and quick indexation. The robust cutting material and coating combination supports longer edge life, meaning fewer tool changes and lower tooling costs over time. In practice, shops will see productivity gains through improved edge stability and reduced scrap rates, while maintenance routines remain straightforward thanks to the insert’s predictable wear behaviour. For tailored advice on applying Walter Tools Tiger·tec Gold inserts in stainless steel machining, contact Metav Werkzeuge for specification support and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: ROMX1204M0-D67-WMP45G-WALTER Designation: ROMX1204M0-D67 WMP45G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Dimensions / Core data Plate size: 12 Thickness: 04 Plate form: Rund Chipbreaker: D67 Tolerance class: M Materials & Features Material group: M (stainless steel) Coated carbide (WMP45G) Grade: WMP45G Execution: X Shape: Round Suitable for stainless steel FAQ What materials is this insert intended for? The ROMX1204M0-D67 WMP45G is specified for the ISO group M and is suitable for machining stainless steel; the WMP45G grade and Tiger·tec Gold coating support secure chip formation in these alloys. How does the chipbreaker D67 influence machining? The chipbreaker D67 controls chip geometry to prevent long, stringy chips and to facilitate evacuation from the cutter, improving process stability and contributing to a consistent surface finish. Which dimensions and format should be expected for toolholder selection? The insert is a round format with a plate size of 12 and a thickness of 04; these dimensions make it compatible with milling cutters designed for ROMX-style round inserts. What performance improvements are typical with this grade and coating? Users can expect improved edge stability and longer tool life thanks to the Tiger·tec Gold-coated WMP45G grade, which reduces built-up edge and supports sustained cutting under medium to robust conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ROMX1204M0-D67 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade that delivers stable chip formation and extended edge life in demanding applications; combine WSM45X robustness with effective chip control from the D67 breaker for smoother milling of stainless steel and superalloys. Order the ROMX1204M0‑D67 WSM45X insert directly via Metav Werkzeuge or request technical advice from our consultants. ROMX1204M0‑D67 WSM45X round milling indexable insert Ø12 mm, chipbreaker D67 — Walter Tools A ROMX1204M0‑D67 WSM45X round milling insert engineered for secure chip control and durable performance when machining stainless steel and heat-resistant superalloys Coated carbide grade WSM45X for hard alloys Round insert Ø12 mm for robust milling Chipbreaker D67 ensures stable chip control Optimised for stainless steel and superalloys Stable chip control that raises process reliability The combination of a dedicated chipbreaker D67 and a coated WSM45X grade provides consistent chip formation even under high thermal stress. The controlled chip flow reduces the likelihood of built-up edge and unstable cutting conditions, which in turn minimises unplanned stoppages and rework. For production environments machining stainless steel or nickel‑based alloys, this behaviour translates into fewer insert changes and a more predictable tool life, supporting tight tolerances and higher overall equipment effectiveness. Material capability and longer cutting performance The WSM45X grade is a coated carbide designed specifically for difficult‑to‑cut materials: its substrate and coating combination are balanced for heat resistance and edge stability when cutting stainless steel and superalloys (ISO groups M and S). This prioritisation of thermal and mechanical robustness helps to preserve the cutting edge under elevated temperatures, delivering a favourable cost‑per‑cut metric through reduced frequency of indexation and replacement. Where component quality and surface finish matter, the insert’s performance contributes directly to consistent, repeatable results. Practical integration and geometry benefits for milling operations With a round form and a nominal size of Ø12 mm, this indexable insert fits into a wide range of milling cutters that accept circular geometries and benefits from the insert’s multiple indexing positions. The tolerance class M and the plate geometry support reliable seating and repeat accuracy in the cutter pocket. The capability code and chipbreaker selection allow planners to match cutting data to workpiece material and operation type, simplifying process setup. Explanations: a round insert delivers even cutting forces and good strength; the chipbreaker is a micro‑geometry that directs chips away from the cutting zone to prevent clogging. Request a cutting test or a tailored application consultation from Metav Werkzeuge to verify performance of the ROMX1204M0‑D67 WSM45X insert for specific stainless steel or superalloy operations Technical data Article number: ROMX1204M0-D67-WSM45X-WALTER Name: ROMX1204M0‑D67 WSM45X milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Facts Shape: Round Diameter: 12 Thickness code: 04 Chipbreaker: D67 Tolerance class: M Special features Material suitability: S / M Suitable for: stainless steel Coated carbide (grade description) ISO designation: ROMX1204M0‑D67 WSM45X Construction: X execution FAQ What materials is this insert intended for? This insert is specified for machining stainless steel and heat‑resistant superalloys (ISO groups M and S); the WSM45X grade supports secure chip formation in these materials. How does the D67 chipbreaker affect machining? The D67 chipbreaker directs and controls chips to reduce built‑up edge and improve process stability; with the ROMX1204M0‑D67 WSM45X insert, chip control contributes to longer effective cutting life. Is the round geometry suitable for heavy milling operations? Round inserts offer strong cutting edges and uniform load distribution; the Ø12 form of this insert is suitable for robust milling when applied in compatible cutter bodies. Can this insert be used across different cutter systems? Compatibility depends on the cutter pocket and clamping system; the ROMX1204M0‑D67 WSM45X follows common round insert dimensions and tolerance class M, but toolholders must be checked for seat and clamping fit Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ROMX1204M0-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, proven chip control and broad material capability to maintain a steady production flow; ideal for high‑security milling of steel, stainless steel and heat‑resistant alloys. Order the ROMX1204M0‑D67 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ROMX1204M0‑D67 WSP45G milling insert — round design with Tiger·tec Gold coating by Walter Tools ROMX1204M0‑D67 WSP45G is a round milling insert designed for general milling applications where process stability and predictable tool life are required Tiger·tec Gold PVD coating for long tool life Suitable for steel, stainless steel and superalloys Round insert, size 12 for versatile pocketing D67 chipbreaker for controlled swarf evacuation Consistent performance across demanding materials The Tiger·tec Gold coating combined with the WSP45G grade provides a robust, PVD‑based wear barrier that helps to extend cutting edge life in interrupted and continuous milling. This combination reduces flank wear and supports consistent machining results over longer tool life, which in turn lowers setup frequency and increases uptime. The design is optimised for typical heat and chip formation when machining steel grades, offering reliable material removal rates and reduced secondary finishing. Predictable stability and improved chip control The round geometry and the D67 chipbreaker create a balance between form strength and swarf control, delivering a stable cutting edge that tolerates variations in feed or slight deflection. In practice this means fewer edge failures when machining stainless steel and superalloys, where adhesion and heat concentration are common issues. The insert’s form helps maintain surface quality while reducing the risk of built‑up edge, improving both process security and component consistency. Practical application notes for efficient setup As a round insert marked ROMX1204M0‑D67, the component fits a broad range of milling pockets and is particularly useful where indexable versatility is needed. The size 12 format and tolerance class M allow straightforward positioning for many standard cutters; execution code X denotes the specification variant for this series. For mixed‑material production involving steel, stainless steel and high‑temperature alloys, the grade WSP45G supports a single‑grade approach that simplifies tooling inventory while maintaining performance. For questions about specific cutter compatibility or recommended cutting data, technical advice is available from Metav Werkzeuge. For tailored advice on integrating Walter Tools inserts into existing processes, contact Metav Werkzeuge to discuss recommended assemblies and cutting data. Technical Data Article number: ROMX1204M0-D67-WSP45G-WALTER Designation: ROMX1204M0‑D67 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core specifications Size: 12 Thickness code: 04 Tolerance class: M Chipbreaker: D67 Execution: X Materials & features Series: Tiger·tec Gold Grade: WSP45G (coated carbide) Applicable materials: P / M / S Form: Round Application focus: versatile milling tasks FAQ What materials can this insert machine reliably? The ROMX1204M0‑D67 WSP45G is suited for machining groups P, M and S, meaning unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. Is the WSP45G grade coated and what benefit does that provide? Yes, WSP45G is a coated carbide grade from the Tiger·tec Gold series; the PVD coating improves wear resistance and helps to maintain a stable cutting edge under elevated temperatures. Which chipbreaker does the insert use and why does it matter? This insert features the D67 chipbreaker, designed to produce controlled chips for safer evacuation and improved surface finish during milling operations. Can the insert be used for interrupted cuts and pocketing? The round geometry and robust grade make the insert well suited to interrupted cuts and pocketing, where edge strength and repeatable performance are required. How to obtain cutting data or confirm holder compatibility? Technical enquiries and cutting data recommendations can be provided by Metav Werkzeuge; reference ROMX1204M0‑D67 WSP45G and the Walter Tools designation when requesting support. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, brand‑new product from Walter Tools.
ROMX1204M0-F67 WMP45G WMP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, the WMP45G grade optimised for rostfreier Stahl, and the secure F67 chipbreaker for stable chip control and consistent performance in series production. Order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. ROMX1204M0-F67 WMP45G round milling insert with F67 chipbreaker — Walter Tools A ROMX1204M0-F67 WMP45G round indexable milling insert engineered for dependable machining of rostfreier Stahl under medium to robust cutting conditions. Tiger·tec Gold coated carbide grade WMP45G Optimised F67 chipbreaker for secure chip control Suitable for rostfreier Stahl machining (ISO M) Round 12 mm plate, 4.0 mm thickness High-process reliability for rostfreier Stahl machining The combination of the Tiger·tec Gold coating with the WMP45G grade provides a balance of wear resistance and edge strength that supports stable machining of rostfreier Stahl. The coating technology reduces built-up edge tendency and improves heat resistance, which helps maintain a consistent cutting edge under elevated thermal loads. As a result, the insert delivers predictable tool life and repeatable component quality even when conditions become demanding. Improved surface finish and controlled chip formation Equipped with the F67 chipbreaker on a round 12 mm plate, this design promotes reliable chip segmentation and evacuation during milling. The plate geometry and 4.0 mm thickness contribute to cutting edge stability, reducing chatter and supporting enhanced surface integrity on the workpiece. For production environments where consistent finish and dimensional adherence matter, the combination of chip control and mechanical stiffness translates directly into fewer reworks and steadier cycle times. Easy integration and efficient machining operations As an indexable insert in a standard milling system, the item fits established toolholders and clamping systems for quick replacement and minimum downtime. The coated carbide construction is suited to the particular demands of rostfreier Stahl, offering a compromise between toughness and hardness that supports both roughing and semi-finishing passes. The result is improved process efficiency: longer intervals between tool changes and a stronger capacity to absorb small process deviations without sudden failure, which benefits productivity across batch and continuous production runs. Contact Metav Werkzeuge to discuss suitability of the ROMX1204M0-F67 WMP45G Tiger·tec Gold inserts for specific rostfreier Stahl applications or to request application data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ROMX1204M0-F67-WMP45G-WALTER Product designation: ROMX1204M0-F67 WMP45G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Plate size: 12 mm Thickness: 4.0 mm Chipbreaker: F67 Tolerance class: M Plate form: Round Special features Series: Tiger·tec Gold Grade: WMP45G Coating/material: Coated carbide Application: rostfreier Stahl Execution: X Base designation: ROMX1204M0-F67 FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The ROMX1204M0-F67 WMP45G is specifically designed for machining rostfreier Stahl, with the WMP45G grade and Tiger·tec Gold coating supporting secure chip formation and edge stability. What does the F67 chipbreaker do? The F67 chipbreaker promotes controlled chip segmentation and evacuation, which reduces the risk of built-up edge and contributes to consistent surface quality when milling rostfreier Stahl. Which plate size and thickness are delivered? The insert is supplied in a round 12 mm plate format with a 4.0 mm thickness, providing mechanical rigidity for stable milling operations. Can this insert be used for finishing passes? Yes. The coated carbide grade and chip control allow the insert to be applied in both roughing and semi-finishing or finishing strategies depending on cutting data and machine stability. Is the ROMX1204M0-F67 compatible with standard toolholders? The ROMX1204M0-F67 design follows common indexable insert formats and is intended for use with compatible toolholders that accept the round plate geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarked names and designations are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the specified manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
ROMX1204M0-F67 WSM45X WSM45X Wendeplatten - Walter Tools
The combination of a WSM45X coated carbide grade with a dedicated F67 chipbreaker delivers stable cutting edges and reliable chip control for demanding materials; the round 12 geometry and tolerance class M ensure flexible use and repeatable accuracy. Order genuine Walter Tools inserts directly via Metav Werkzeuge or request application guidance from our consultants. ROMX1204M0-F67 WSM45X — Round milling indexable insert, F67 chipbreaker | Walter Tools A ROMX1204M0-F67 WSM45X round milling indexable insert designed for secure, consistent machining of stainless steels and heat‑resistant superalloys such as titanium Coated carbide grade WSM45X Optimised chip control F67 Round 12 size, thickness 04 Tolerance class M for precision High performance for hard-to-machine materials The WSM45X grade is a coated carbide designed to cope with the demands of stainless steels and heat‑resistant superalloys (S). The combination of a robust substrate and a protective coating improves wear resistance and reduces the tendency for built‑up edge during interrupted cuts. For production environments this translates into longer tool life and fewer indexings, which supports higher machine uptime and consistent part quality. The round geometry further increases flexibility for trochoidal and high‑feed milling strategies while maintaining a stable cutting edge. Reliable chip formation and surface quality The integrated F67 chipbreaker shapes chips to reduce clogging and evacuate material reliably, which is crucial when working with heat‑sensitive alloys that tend to form long, stringy chips. Controlled chip flow minimises thermal loads at the cutting zone and helps achieve a better surface finish with less manual rework. The insert’s tolerance class M offers repeatable seating and positional accuracy in the cutter body, supporting stable process parameters and predictable machining results across production batches. Process benefits and practical integration As a round indexable insert with a compact profile, this grade is suitable for both roughing and semi‑finishing passes depending on cutter geometry. The coated surface provides an additional barrier to chemical and thermal wear, improving performance where cooling and lubrication are limited. For engineering teams the outcome is a measurable efficiency gain: fewer tool changes, consistent cycle times and reduced scrap. The insert’s specification and geometry allow straightforward interchange in tooling systems that accept round 12 inserts, enabling quick deployment without extensive requalification. For tailored application recommendations and secure supply of genuine Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ROMX1204M0-F67-WSM45X-WALTER Name: ROMX1204M0-F67 WSM45X Type: Milling indexable insert Brand: Walter Tools Grade / series: WSM45X; Walter coated carbide series (open) Execution: X Form: Round Facts Size: 12 Thickness: 04 Tolerance class: M Special features Chipbreaker: F67 Material groups: S / M (heat‑resistant superalloys/titanium and stainless steels) Coated carbide (beschichtetes Hartmetall) Round geometry for flexible milling strategies Series information: Walter Schneidstoffsorte - Serie offen FAQ Which materials is this insert suitable for? The ROMX1204M0-F67 WSM45X insert from Walter Tools is formulated for stainless steels (M) and heat‑resistant superalloys and titanium (S), aligning with the ISO 513 material groups quoted for this grade. What is the function of the F67 chipbreaker? F67 is a chip control geometry that promotes short, controllable chips and efficient evacuation, reducing the risk of chip entanglement and helping to protect the cutting edge when machining sticky or ductile alloys. What does the WSM45X grade offer? WSM45X is a coated carbide grade that emphasises edge stability and wear resistance for demanding applications; it supports consistent performance in materials that generate high heat or promote built‑up edge. Can the round 12 geometry be used for high‑feed strategies? Yes, the round profile of the insert permits trochoidal and high‑feed approaches when combined with compatible cutter bodies, offering flexibility between aggressive material removal and more conservative finishing passes. What does tolerance class M mean for mounting accuracy? Tolerance class M indicates a manufacturing tolerance that supports repeatable seating in the cutter, which contributes to stable tool life and consistent part dimensions across production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
ROMX1204M0-F67 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating and the WSP45G grade for extended tool life and reliable chip control with the F67 chipbreaker; this insert delivers versatile performance across steel, stainless steel and superalloys. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored machining advice. ROMX1204M0-F67 (ISO ROMX1204M0-F67) WSP45G milling insert by Walter Tools ROMX1204M0-F67 WSP45G — a coated indexable milling insert engineered for robust milling of steel, stainless steel and heat-resistant alloys in general machining applications. Tiger·tec Gold PVD coating for extended tool life Versatile for steel, stainless steel and superalloys Round insert, size 12, stable cutting edge F67 chipbreaker for reliable chip control Deliver predictable productivity with a wear-resistant grade The combination of the Tiger·tec Gold coating technology and the WSP45G grade provides a balance between wear resistance and edge toughness that supports higher productivity and fewer tool changes. The PVD-coated carbide substrate is designed to reduce flank wear and maintain cutting-edge stability under the thermal and mechanical loads typical of turning and milling processes. This results in a measurable improvement in component throughput and process repeatability for medium to heavy-duty milling operations. Consistent chip control and geometry benefits The F67 chipbreaker is optimised for controlled chip formation across a range of feeds and depths of cut, enabling safe evacuation and reduced risk of chip re-cutting. The round geometry of the insert distributes cutting forces evenly, improving robustness in interrupted cuts and heavy radial engagement. The insert’s form and the stable cutting edge reduce the likelihood of edge chipping, which in turn supports longer intervals between indexings and a more consistent surface finish. Suitable for a broad material spectrum and demanding alloys This grade explicitly covers the ISO groups P, M and S, meaning suitability for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys/titanium. The design addresses common machining challenges such as high heat generation and sticky chip behaviour in stainless steel, and the strong, heat-resistant edge required for nickel- and cobalt-based alloys. For operations where material mix or variable batch composition is common, the insert offers a practical balance of reliability and versatility. Practical handling and process guidance for reliable results The insert is delivered in the specified round form with size 12 and thickness 04, tolerance class M, and is intended for use as an indexable milling insert in compatible toolholders. The tolerance class ensures repeatable seating and reliable indexing. For best results, align cutting parameters with the workpiece material class and machine rigidity; the grade supports stable performance under a range of feeds and cutting conditions. If clarification on compatibility with a specific toolholder or machining scenario is required, technical advisors can provide targeted recommendations. For application-specific recommendations or to secure availability of this Walter Tools Tiger·tec Gold ROMX1204M0-F67 WSP45G insert, contact Metav Werkzeuge for advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: ROMX1204M0-F67-WSP45G-WALTER Label: Fräswendeschneidplatte ROMX1204M0-F67 WSP45G Walter Tools Manufacturer: Walter Tools / Walter Deutschland GmbH Product type: Milling insert Series / Grade: Tiger·tec Gold / WSP45G Geometry: Round Chipbreaker: F67 Execution: X Tolerance class: M Material suitability: P / M / S Facts Size: 12 Thickness: 04 Tolerance class: M Grade designation: WSP45G Special features PVD-coated carbide (Tiger·tec Gold) Versatile for steel, stainless steel and superalloys Designed for stable chip formation and edge life Indexable insert, round shape FAQ What materials is this insert suitable for? The ROMX1204M0-F67 WSP45G insert from Walter Tools is suitable for ISO groups P, M and S, covering steels, stainless steels and heat-resistant superalloys. What does the Tiger·tec Gold coating provide? Tiger·tec Gold is a PVD coating system that enhances wear resistance and edge stability for the WSP45G grade, extending service life in demanding milling applications. How does the F67 chipbreaker improve machining? The F67 chipbreaker on this round insert supports controlled chip formation and evacuation, reducing re-cutting and helping to maintain surface quality during milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are cited for explanation and classification only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ROMX1204M08-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, cast-iron suitability and stable chip control for productive milling. Order the ROMX1204M08-D57 WKK25G indexable milling insert directly via Metav Werkzeuge or ask our consultants if needed. ROMX1204M08-D57 WKK25G — round indexable milling insert, Tiger·tec Gold, for cast iron | Walter Tools The ROMX1204M08-D57 WKK25G is a round indexable milling insert designed for efficient machining of cast iron components, combining a robust coated grade with a dedicated chipbreaker for stable production processes. Tiger·tec Gold coating for high wear resistance Optimised for abrasive cast iron machining Round 12 mm insert with D57 chipbreaker Consistent tool life and stable chip formation Prolonged component life through advanced coating technology The Tiger·tec Gold coating and the WKK25G grade deliver significantly improved wear resistance when machining abrasive cast iron. The engineered multilayer coating reduces flank and crater wear, which translates into longer intervals between indexings and more predictable tool life. For production environments this means fewer tool changes, more uptime and a measurable improvement in process stability compared with uncoated grades. The grade is tailored to the ISO group K, so expectations for cutting behaviour and longevity can be reliably planned. Stable chip control that supports higher feed rates The D57 chipbreaker and the round insert geometry combine to break short, brittle chips typical of cast iron and to evacuate them consistently from the cutting zone. This results in lower risk of chip recutting, reduced vibration and improved surface finish on the machined part. The round shape also allows for flexible entry angles and smoother tool paths, making this insert suitable for shoulder milling, ramping and trochoidal strategies where chip control is critical. Designed for predictable production and simple tool management A compact nominal size of 12 with a thickness designation of 04 and tolerance class M supports repeatable clamping and reliable seating in standard round-pocket milling heads. The series design and consistent geometry make inventory management straightforward: fewer SKU variants, clear grade allocation and uniform tool behaviour across batches. The result is an efficient shop-floor routine with predictable component tolerances and reduced inspection cycles. Clear application guidance for machining operations This insert is primarily intended for cast iron workpieces and is optimised for the short, breaking chip forms that such materials produce. The WKK25G grade is a coated cemented carbide designed to tolerate abrasive constituents in cast iron while maintaining edge stability. For combined-material operations or for different steel grades, selection should follow the material group guidance; when in doubt, consult tooling data sheets or the technical advisers to align insert choice with the specific workpiece alloy and machining strategy. Contact Metav Werkzeuge to discuss how the Walter Tools ROMX1204M08-D57 WKK25G can be integrated into existing milling processes and to arrange prompt delivery through Metav Werkzeuge. Technical data SKU: ROMX1204M08-D57-WKK25G-WALTER Article: ROMX1204M08-D57 WKK25G Brand: Walter Tools Product type: indexable milling insert Series: Tiger·tec Gold Facts Insert size: 12 Thickness designation: 04 Tolerance class: M Special features Grade: WKK25G Coating: Tiger·tec Gold Geometry: round Chipbreaker: D57 Material group suitability: cast iron (ISO K) Execution: X FAQ What materials is this insert suitable for? The ROMX1204M08-D57 WKK25G is designed primarily for cast iron (ISO group K) and performs best on abrasive, brittle cast-iron grades. What does the D57 chipbreaker do? The D57 chipbreaker promotes short-chip formation and reliable evacuation during milling of cast iron, reducing vibration and improving surface quality. Can this round insert be used for shoulder milling? Yes, the round geometry is well suited to shoulder milling and trochoidal strategies where flexible entry angles and smooth tool paths are required. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating enhances wear resistance and edge stability, resulting in longer index intervals and more consistent tool life in abrasive machining applications. Is the ROMX1204M08-D57 WKK25G compatible with standard round-pocket milling heads? The insert’s dimensions and tolerance class M make it compatible with common round-pocket milling heads; verify seat type and clamping method with the toolholder specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer.
ROMX1204M08-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WKP35G coated-carbide grade and the stable round geometry for reliable machining of steel and cast iron — order the ROMX1204M08-D57 WKP35G directly via Metav Werkzeuge or consult our specialists for application support ROMX1204M08-D57 WKP35G – Indexable milling insert, Tiger·tec Gold, for steel and cast iron | Walter Tools The ROMX1204M08-D57 WKP35G is a round indexable milling insert engineered for efficient material removal and consistent performance when machining steel and cast iron Tiger·tec Gold coating for extended tool life Optimised for machining steel and cast iron Round 12 insert with D57 chipbreaker Robust WKP35G coated carbide grade Extended service life through advanced coating The combination of Tiger·tec Gold surface engineering and the WKP35G coated-carbide grade provides a clear production advantage: enhanced wear resistance and prolonged cutting-edge stability. Coated carbide refers to a cemented carbide body with a multi-layer coating that reduces abrasive wear and increases thermal protection during cutting. For everyday shop-floor conditions this translates into fewer index changes, lower tooling costs over time and improved process consistency when working with unalloyed or alloyed steels and cast irons. The result is a measurable reduction in downtime and a more predictable tool-life cycle. Consistent chip control for higher productivity The D57 chipbreaker geometry is configured to manage typical chips from steel and cast iron effectively, reducing the risk of entanglement and improving swarf evacuation. A dedicated chipbreaker shapes chips to be short and controllable, which supports uninterrupted cutting and simplifies automation or conveyor handling. Combined with the round insert form, the geometry promotes stable cutting forces and reduces vibration, allowing for steady material removal rates and safer, more efficient milling in serial production environments. Precise geometry for dependable machining results Tolerance class M and the round format contribute to repeatable seating and clamping accuracy in standard toolholders. The insert’s dimensions (plate size 12, plate thickness 04) and the round outline enable multiple usable cutting positions per index, so replacement cycles are economical. Precise geometry means that the cutting edge engagement is consistent part to part, which aids surface-finish control and dimension stability. For shops aiming to maintain tighter tolerances, this reproducibility supports shorter set-up times and simpler tool qualification. Practical selection guidance for production use When specifying the ROMX1204M08-D57 WKP35G for a machining task, prioritise matching the WKP35G grade to the workpiece group (P / K — steel and cast iron). If operation requirements include high abrasion (typical in certain cast iron grades) or intermittent cuts, the coated-carbide grade and chip control will help maintain edge integrity. For mixed production runs consider the round insert’s flexibility: it tolerates slight engagement variations and supports a range of cutting conditions. For precise cutting parameter recommendations or to evaluate compatibility with a particular holder or machining strategy, consult the technical advisers at Metav Werkzeuge for tailored guidance. For tailored application advice or to request technical documentation from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: ROMX1204M08-D57-WKP35G-WALTER Article: ROMX1204M08-D57 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Plate size: 12 Plate thickness: 04 Chipbreaker: D57 Tolerance class: M Features Shape: Round Grade: WKP35G (coated carbide) Application: P / K (Steel / Cast iron) Execution: X FAQ What materials is this insert suitable for? The ROMX1204M08-D57 WKP35G is designed for machining steel and cast iron; the grade and coating are tuned to the thermal and abrasive conditions typical for these workpiece groups. How does the D57 chipbreaker improve cutting performance? D57 is a dedicated chipbreaker geometry that promotes short, controlled chips and improves swarf evacuation, which supports continuous cutting and reduces the risk of chip-related interruptions with the ROMX1204M08-D57 WKP35G. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold enhances wear resistance and thermal protection on the cutting edge, extending tool life and delivering more consistent performance under standard milling loads for the WKP35G grade. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing accuracy of the insert, contributing to repeatable seating and stable cutting behaviour when the insert is mounted and indexed in compatible toolholders. Is the round insert form beneficial for mixed production runs? Yes; the round outline offers robustness and multiple indexed cutting positions, making it suitable for different engagement angles and a variety of milling operations with the same insert Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer (Walter Tools).
ROMX1204M08-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and stable chip control for predictable, productive milling. Request supply or specialist advice via Metav Werkzeuge to secure a consistent tool flow and reduced downtime. ROMX1204M08-D57 WPP35G — Milling indexable insert by Walter Tools, Tiger·tec Gold coating for steel machining The ROMX1204M08-D57 WPP35G is a round milling indexable insert designed for reliable steel machining with optimised chip formation and extended service intervals. Tiger·tec Gold coating for long tool life Optimised D57 chipbreaker for steel machining Round insert, 12 mm diameter for flexible mounting Coated carbide grade WPP35G for consistent wear Productivity through optimised coating and grade The Tiger·tec Gold series and the WPP35G grade combine coated carbide technology with a tested balance of wear resistance and toughness to deliver predictable tool life in steel operations. The advanced coating reduces flank and crater wear under the typical thermal loads encountered when machining steels (ISO P group), so cycle times remain stable and tool change frequency falls. For production environments where uptime and repeatable part quality matter, the improved thermal stability and consistent cutting edge integrity translate directly into measurable productivity gains. Controlled chips and stable cutting for fewer process interruptions The D57 chipbreaker is engineered to produce short, manageable chips when cutting steels, reducing the risk of entanglement and toolholder interference. The round insert geometry offers reliable engagement in trochoidal and slotting operations while maintaining a smooth entry and exit behaviour. With a tolerance class M and a nominal size of 12, the insert supports predictable assembly and repeatable positioning in compatible tool bodies, aiding machining accuracy and lowering scrap rates. Economic machining with broad steel suitability The cutting grade is optimised for steels: the specification rates the material as suitable for typical steel applications, offering a compromise between the 10 (wear-resistant) and 30/35 (tougher) performance bands described by the manufacturer. This makes the insert a versatile choice for mixed-production shops where a single grade must handle a range of carbon and alloy steels. The result is fewer grade changes, simplified inventory and a clear return on investment through longer intervals between replacements and consistent surface finish quality. Contact Metav Werkzeuge for application-specific recommendations and secure supply of Walter Tools ROMX1204M08-D57 WPP35G inserts Technical data Article number: ROMX1204M08-D57-WPP35G-WALTER Label: Fräswendeschneidplatte ROMX1204M08-D57 WPP35G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Gold Grade: WPP35G Execution: X Facts Insert size: 12 Thickness: 04 Chipbreaker: D57 Shape: Round Tolerance class: M Special features Coated carbide grade WPP35G Designed for ISO P (steel) applications Optimised for stable chip control Suitable for productive, repeatable machining FAQ What materials is this insert designed for? The ROMX1204M08-D57 WPP35G insert is specified for steel (ISO P); the grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation characteristics typical of steel machining. How does the D57 chipbreaker affect machining? The D57 chipbreaker produces short, controlled chips during steel cutting, reducing chip-related interruptions and improving process reliability when using the ROMX1204M08-D57 WPP35G in compatible milling operations. Is the insert suitable for heavy interrupted cuts? The WPP35G grade balances wear resistance and toughness to handle a range of steel conditions; however, specific suitability for heavily interrupted cuts should be confirmed against the intended cutting parameters and toolholder setup. Which toolholders accept this round insert form? Round indexable inserts with the designation ROMX1204M08-D57 are compatible with tool bodies that accept 12-size round inserts and the associated clamping systems; verify the toolholder’s seat and clamping geometry for exact fitment. What are the main benefits of the Tiger·tec Gold series here? Tiger·tec Gold provides improved edge stability and wear control under elevated temperatures common in steel machining, so the ROMX1204M08-D57 WPP35G achieves consistent surface finish and longer service intervals. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and brand names mentioned (including Walter Tools) are the property of their respective owners and are cited for explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the manufacturer.
ROMX1204M08-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WSM35G grade optimised for high temperatures, and a round geometry with D57 chipbreaker for predictable chip control and extended edge life; order directly via Metav Werkzeuge or contact our consultants for application-specific advice. ROMX1204M08-D57 WSM35G – round indexable milling insert, Tiger·tec Gold coating, Walter Tools The ROMX1204M08-D57 WSM35G is a round indexable milling insert engineered for demanding machining of rostfreier Stahl and heat-resistant superalloys, offering stable cutting performance in high-temperature applications Tiger·tec Gold coated grade WSM35G Optimised for rostfreier Stahl and superalloys Round geometry for consistent chip control D57 chipbreaker for a stable cutting edge High-performance grade engineered for difficult-to-machine alloys The coated carbide WSM35G grade, part of the Tiger·tec Gold family, is designed to maintain a stable cutting edge when machining materials that cause high thermal and mechanical load. For applications in rostfreier Stahl (ISO group M) and heat-resistant alloys (ISO group S), the coating and substrate combination improves heat resistance and wear behaviour, which reduces edge breakdown and supports reproducible component quality. Operators benefit from longer tool life and fewer insert changes, which contributes to process reliability and lower overall machining costs. Geometry and chip control for predictable results The round insert form and the D57 chipbreaker create controlled chip flow and reduce the tendency to form built-up edge on sticky materials. The insert’s tolerance class M and the specified thickness 04 enhance seating stability in standard holders, improving positional repeatability during serial production. This geometry supports steady cutting forces and makes parameter tuning easier on conventional and CNC milling machines, so process engineers can achieve consistent surface finish and dimensional accuracy with minimal rework. Practical integration and benefits for production As a coated indexable insert from Walter Tools, the ROMX1204M08-D57 WSM35G combines a robust substrate with a high-performance coating to deliver predictable performance in demanding environments. Coated carbide means a hard substrate with a thin, wear-resistant coating, which together provide both fracture resistance and improved wear life. For workshops that machine rostfreier Stahl and superalloys, the result is fewer tool changes, improved component repeatability and enhanced productivity — advantages that support leaner production planning and lower tooling-related downtime. Contact Metav Werkzeuge for tailored application advice, delivery options and a quotation based on the ROMX1204M08-D57 WSM35G and the specific materials in use — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: ROMX1204M08-D57-WSM35G-WALTER Description: Fräswendeschneidplatte / Indexable milling insert Series: Tiger-tec Gold Grade: WSM35G Insert designation: ROMX1204M08-D57 WSM35G Manufacturer: Walter Tools Execution: X Material code: S / M Facts Size: 12 Thickness: 04 Chipbreaker: D57 Tolerance class: M Special features Shape: Round Coating: Tiger·tec Gold Substrate: Coated carbide Suitable for: M (rostfreier Stahl), S (heat-resistant superalloys and titanium) Stable chip control and cutting-edge security FAQ What materials is this insert best suited for? The ROMX1204M08-D57 WSM35G is specifically formulated for rostfreier Stahl (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), delivering improved wear resistance and edge stability. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSM35G grade reduces thermal wear and increases resistance to abrasion, which extends insert life and supports consistent component quality in continuous milling operations. Is the round geometry suitable for roughing and finishing? Round geometry with the D57 chipbreaker provides excellent chip control and force distribution, making the insert versatile for both heavy roughing passes and semi-finishing operations when parameters are adapted. What does tolerance class M mean for setup? Tolerance class M indicates a standardised dimensional accuracy that improves repeatable seating in compatible tool holders, supporting predictable runout and minimising setup variation across production batches. Manufacturer/Responsible: Walter Tools / Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ROMX1204M08-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and broad material suitability to keep milling processes productive and predictable. Order these Tiger·tec Gold inserts via Metav Werkzeuge or consult the team for tailored application advice. ROMX1204M08-D57 WSP45G milling indexable insert — Tiger·tec Gold, PVD-coated carbide (Walter Tools) The ROMX1204M08-D57 WSP45G is a round milling indexable insert designed for robust face and shoulder milling in steel, stainless steel and heat‑resistant alloys, offering stable cutting edges and consistent chip evacuation. Tiger·tec Gold PVD-coated carbide Suited for steel, stainless steel and superalloys Round 12 mm insert with D57 chipbreaker Long‑lasting PVD coating for demanding production The Tiger·tec Gold PVD coating combined with a coated carbide substrate gives the insert excellent wear resistance and thermal stability. The WSP45G grade is formulated for a broad range of milling tasks and supports stable cutting edges even under elevated temperatures. This results in predictably long tool life and fewer changes in the tool magazine, which reduces machine downtime and simplifies process planning. Consistent chip control across materials Thanks to the D57 chipbreaker and the round insert geometry, the cutting edge delivers reliable chip formation and evacuation when machining steels, stainless steels and nickel‑based alloys. The grade’s versatility for groups P / M / S helps to control built‑up edge and minimise edge degradation, supporting consistent surface finish and dimensional repeatability in series production or repair tasks. Shop‑floor advantages that improve productivity The insert’s 12 mm nominal size, tolerance class M and execution code X make it straightforward to integrate into compatible milling heads and toolholders. The indexable design provides multiple effective cutting edges per insert, reducing tooling cost per workpiece and facilitating rapid edge renewal. Clear specification codes simplify inventory management and ordering for purchasing and production planners. Contact Metav Werkzeuge for application support and availability of Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ROMX1204M08-D57-WSP45G-WALTER SKU: ROMX1204M08-D57-WSP45G-WALTER Designation: ROMX1204M08-D57 WSP45G Facts Nominal diameter: 12 mm Thickness code: 04 Chipbreaker: D57 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD‑coated carbide) Material suitability: P / M / S Shape: Round Execution: X Brand: Walter Tools FAQ What materials can this insert machine reliably? The ROMX1204M08-D57 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys; the WSP45G grade is optimised for P / M / S material groups. How does the D57 chipbreaker help on the shop floor? The D57 chipbreaker improves chip control and evacuation during milling, which enhances surface finish and reduces the risk of built‑up edge when using the ROMX1204M08-D57 WSP45G insert. Is this insert compatible with standard round insert holders? The round geometry and the ROMX‑designation indicate compatibility with tooling designed for 12 mm round inserts; compatibility should be confirmed against the toolholder specification. What does the Tiger·tec Gold series contribute to performance? Tiger·tec Gold coating provides improved thermal resistance and wear behaviour, helping the WSP45G grade maintain a stable cutting edge under demanding conditions. What does the tolerance class M mean for production? Tolerance class M denotes the manufacturing precision of the insert, supporting predictable fit and repeatable mounting in precision milling systems when using the ROMX1204M08-D57 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
ROMX1204M08-F67 WSM35G X Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G carbide grade, and the F67 chipbreaker to secure longer tool life and reliable chip control in demanding materials; order directly via Metav Werkzeuge or contact our consultants for application advice. ROMX1204M08-F67 WSM35G — round milling indexable insert, Tiger·tec Gold, Walter Tools The ROMX1204M08-F67 WSM35G is a round milling insert designed for high-demand machining of rostfreier Stahl and heat-resistant superalloys in interrupted and continuous cuts Tiger·tec Gold coated carbide WSM35G Optimised chip control with F67 breaker Round 12 mm insert for secure seating Suited for rostfreier Stahl and superalloys Increased edge stability for difficult-to-cut alloys The Tiger·tec Gold technology and the WSM35G grade combine to deliver consistent edge life when machining tough materials. The coated carbide construction provides a balance of wear resistance and toughness, which helps to resist the thermal and mechanical loading typical of rostfreier Stahl and superalloys. This results in fewer unexpected tool changes and more predictable process windows, supporting stable production and improved part quality. Predictable chip formation to reduce interruptions The F67 chipbreaker is engineered to produce short, controllable chips under the flank and face geometries used with this insert. Improved chip control lowers the risk of chip entanglement and reduces secondary operations to clear chips from the work area. For manufacturing lines where uninterrupted cycles matter, this behaviour contributes directly to shorter machining times and improved operator safety. Secure seating and tolerance for stable cutting conditions A round insert geometry with a 12 mm diameter and robust plate thickness offers reliable engagement in typical milling holders and pockets. The tolerance class M supports consistent clamping and repeatable positioning, which in turn minimises vibration and optimises surface finish. The compact round form also tolerates variations in axial positioning, making it suitable for both roughing and semi-finishing passes. Broad material coverage with focused performance Designed for S / M applications, the insert covers heat-resistant superalloys and rostfreier Stahl according to ISO groupings. The Tiger·tec Gold series emphasises thermal stability and a stable cutting edge, enabling productive machining of materials that normally challenge uncoated or less advanced grades. Choosing this insert supports a pragmatic balance between tool life and machining productivity in tougher material classes. Contact Metav Werkzeuge to discuss the Walter Tools ROMX1204M08-F67 WSM35G for specific applications and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation with our specialists Technical Data SKU: ROMX1204M08-F67-WSM35G-WALTER Article designation: ROMX1204M08-F67 WSM35G Product type: milling indexable insert Manufacturer: Walter Tools Measurements / Core data Insert diameter: 12 mm Plate thickness: 04 Tolerance class: M Plate form: Round Chipbreaker: F67 Design / Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Material suitability: S / M Execution: X ISO designation: ROMX1204M08-F67 WSM35G FAQ What materials is this insert suitable for? The ROMX1204M08-F67 WSM35G is designed for machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S) thanks to the Tiger·tec Gold coating and the WSM35G grade. Which chipbreaker should be chosen for long, stringy chips? The F67 chipbreaker on this insert is engineered for improved chip control; in many cases it converts long, stringy chips into short, manageable segments during milling. Can the insert be used for both roughing and semi-finishing? Yes, the round geometry and robust construction of this milling insert make it suitable for both roughing passes and semi-finishing operations, offering a compromise between edge strength and cutting performance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original factory-new product of the manufacturer.
ROMX1204M08-F67 WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a thermally stable, coated carbide grade and an optimised F67 chipbreaker for reliable chip control and consistent edge life when machining challenging alloys; order or request advice via Metav Werkzeuge for application-specific recommendations. ROMX1204M08-F67 WSM45X milling indexable insert (round, F67 chipbreaker) – Walter Tools ROMX1204M08-F67 WSM45X is an indexable milling insert engineered for robust performance in high-temperature alloys and rostfreier Stahl applications WSM45X coated carbide for heat resistance F67 chipbreaker for stable chip control Round insert with 12 mm inscribed circle Engineered for rostfreier Stahl and superalloys High thermal stability for demanding materials The WSM45X grade is a coated carbide developed to withstand elevated cutting temperatures and the adhesive tendencies of rostfreier Stahl. Its coating supports stable chip formation and protects the cutting edge against thermal degradation, which reduces the risk of built-up edge and preserves surface finish. The combination of a dedicated grade and the F67 chipbreaker helps to break and evacuate chips consistently, lowering the likelihood of rework and unplanned stoppages in series production. This results in more predictable tool life and a steadier machining process when turning to higher feeds or aggressive engagement. Process security and measurable cost benefits Using an insert with a focused substrate and chip control geometry improves process security: the cutting edge remains more repeatable across batches, and machining cycles show fewer anomalies. The round geometry with an inscribed circle of 12 mm and thickness code 04 contributes to mechanical rigidity in the cutter body, which benefits vibration resistance and edge stability. For manufacturers working with ISO groups M and S, the grade’s balanced wear resistance and toughness mean fewer index changes and better utilisation of each insert face, helping to lower tooling consumption and supporting productivity goals across shift cycles. Practical selection and application notes The ROMX1204M08-F67 WSM45X insert is particularly suitable for interrupted and continuous milling of rostfreier Stahl and heat-resistant superalloys, where chip control and edge durability are decisive. The round form factor offers multi-edge indexing for economical use, while the F67 chipbreaker is optimised for controlled chip flow under the high temperatures typical of these materials. For tooling set-up, match cutter geometry and clamping rigidity to application demands; small adjustments to feed per tooth and coolant strategy will often yield significant improvements in edge life and surface quality. For further parameter recommendations and compatibility with specific toolholders, consult Metav Werkzeuge’s technical resources. For machining rostfreier Stahl and superalloys with Walter Tools quality, contact Metav Werkzeuge for tailored cutting data, availability and guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ROMX1204M08-F67-WSM45X-WALTER Designation: ROMX1204M08-F67 WSM45X Manufacturer: Walter Tools Facts Inscribed circle: 12 Thickness code: 04 Tolerance class: M Special features Shape: Round Chipbreaker: F67 Grade: WSM45X (coated carbide) Material applicability: S / M Series: Walter Schneidstoffsorte - Serie offen Execution: X FAQ What materials is this insert designed for? The ROMX1204M08-F67 WSM45X insert by Walter Tools is designed for rostfreier Stahl and high-temperature superalloys, covering ISO groups M and S. What does the F67 chipbreaker provide? The F67 chipbreaker on this Walter Tools milling insert enables controlled chip segmentation and evacuation, improving surface quality and reducing the risk of built-up edge during continuous and interrupted milling. How many usable edges are available with the round geometry? Round geometry provides multiple indexable edges; the ROMX1204M08-F67 WSM45X offers economical edge usage when correctly mounted in compatible milling cutters. What does tolerance class M indicate? Tolerance class M denotes the machining tolerance standard applied to the insert geometry; for the ROMX1204M08-F67 WSM45X it ensures consistent fit and repeatability in the toolholder. Is this grade suitable for titanium alloys as well? The WSM45X grade is targeted at materials classified under ISO group S (heat-resistant superalloys and titanium) as well as M, so it can be applied to certain titanium machining tasks depending on cutter geometry and parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is part of the Sandvik Group and is recognised for precision cutting solutions. Protected trademarks and trade names are the property of their respective owners. The mentioned brand names are used for descriptive purposes only and do not imply any affiliation. The offered article is an original, factory-new product of the manufacturer.
ROMX1204M08-F67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge stability, broad material compatibility and optimised chip control for uninterrupted milling cycles; order directly via Metav Werkzeuge or consult the specialists for process-adapted recommendations. ROMX1204M08-F67 WSP45G milling indexable insert — Tiger·tec Gold grade, for steel, stainless steel and superalloys | Walter Tools The ROMX1204M08-F67 WSP45G is a round milling indexable insert engineered for versatile face and slot milling in demanding applications across steel, stainless steel and heat-resistant alloys. Round insert ROMX1204M08-F67 WSP45G Tiger·tec Gold PVD-coated carbide Optimised F67 chipbreaker for stable chips Suitable for steel, stainless and superalloys Stable cutting performance for consistent production The Tiger·tec Gold PVD-coated coated carbide grade delivers a predictable balance between wear resistance and edge toughness. Designed for milling routines that require repeatable life and low downtime, this insert promotes a stable cutting edge and controlled wear progression. The integrated F67 chipbreaker supports reliable chip evacuation and reduces the risk of built-up edge, which translates into fewer interruptions for regrinding or insert changes and therefore improved overall process efficiency. Wide material coverage to reduce tool inventory Built for the material groups P/M/S, the insert covers a broad range of substrates: general steel, stainless steel and superalloys and titanium. This versatility allows consolidation of tooling families and simplifies inventory management without compromising surface finish or dimensional stability. For operations facing mixed batches or frequent material switches, the combination of the grade and geometry means fewer tool changes and a more economical workflow. Precise geometry for predictable results The round geometry paired with the specified dimensions and tolerance class M ensures a repeatable contact zone and stable tool behaviour during milling. The nominal size 12 and thickness 04 (insert format) provide a compact footprint with reliable mechanical support in the cutter; the robust form reduces vibration and supports consistent tolerance achievement across series production. Predictable geometry aids CAM programming and process planning, so cycle times and scrap rates stay low. Practical integration and process benefits As an indexable solution from Walter Tools, the insert is designed for quick seat changes and straightforward tool reconditioning. The grade’s emphasis on toughness helps when encountering interrupted cuts or variable engagement, while the Tiger·tec Gold coating contributes to thermal stability at elevated cutting speeds. These characteristics combine into a rational value proposition: longer effective life, less unplanned maintenance and a more stable machining window—benefits that support higher machine utilisation and lower unit costs. Discuss application-specific parameters with Metav Werkzeuge to adapt cut data and secure optimal results with Walter Tools Tiger·tec Gold inserts; Metav Werkzeuge can provide process advice and availability details via info@metav-werkzeuge.com or on +49 2822 7131930 Technical Data Article number: ROMX1204M08-F67-WSP45G-WALTER Designation: ROMX1204M08-F67 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Material groups: P / M / S Product type: Milling indexable insert Numbers / Core technical data Size: 12 Thickness: 04 Tolerance class: M Execution code: X Special features / Versions Round insert geometry F67 chipbreaker PVD-coated carbide Suitable for steel, stainless steel and superalloys Series and grade optimised for milling applications FAQ What materials can be machined with this insert? The ROMX1204M08-F67 WSP45G insert is specified for the ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat‑resistant superalloys and titanium. How does the Tiger·tec Gold coating help in milling? The Tiger·tec Gold coating on this coated carbide grade improves thermal resistance and wear behaviour, helping to maintain a stable cutting edge during high‑energy milling operations. What is the role of the F67 chipbreaker? The F67 chipbreaker is designed to promote controlled chip formation and evacuation, reducing the likelihood of chip re‑entry and enhancing surface quality and tool life. Is the geometry suitable for interrupted cuts? Yes; the round geometry and the toughness of the WSP45G grade provide resilience in interrupted cutting conditions, supporting longer effective life and fewer tool changes. Can this insert reduce tooling variety in a mixed‑material shop? Because the grade covers P/M/S groups, the insert can reduce the number of dedicated grades required, simplifying inventory while maintaining performance across different materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1204M0T8-A27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, tailored cast iron performance and consistent edge life for reliable series milling; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. ROMX1204M0T8-A27 WKK25G indexable milling insert — Tiger·tec Gold, for cast iron (Walter Tools) ROMX1204M0T8-A27 WKK25G is a round indexable milling insert designed for efficient machining of cast iron components, optimised for abrasive wear and short, breaking chips. Tiger·tec Gold coating for wear resistance Optimised for cast iron (K) applications Round insert form for stable cutting results Chipbreaker A27 for controlled chip formation Longer tool life through Tiger·tec Gold coating The Tiger·tec Gold technology provides a coated carbide grade that significantly increases resistance to abrasive wear commonly encountered in cast iron machining. This results in a more stable cutting edge and longer tool life, which reduces tool-change frequency and improves overall process economy. The coating is engineered to withstand the micro-abrasion and thermal loads typical for grey and nodular cast iron, so the insert delivers reliable performance in repetitive production cycles. Consistent machining performance for serial production Designed with a round insert geometry, the component offers predictable cutting behaviour and improved clamping stability during heavy interrupted cuts. The combination of the WKK25G grade and the A27 chipbreaker promotes regular chip breaking and reduces the risk of built-up edge, leading to consistent dimensional results and surface quality over extended tool life. These characteristics support efficient throughput in medium- to high-volume manufacturing environments. Practical advantages of the A27 chipbreaker and insert form The A27 chipbreaker is tuned to produce short, manageable chips when machining cast iron, lowering the need for manual chip handling and decreasing cycle variability. The ROMX1204M0T8-A27 format with its 12 mm form factor and nominal thickness ensures compatibility with standard holders for round inserts and enables straightforward tooling changes. For workshops seeking predictable finishing and semi-finishing results on cast parts, this insert offers a balanced mix of durability and chip control. Designed for application clarity and process reliability This insert is classified for the ISO material group K (cast iron) and is produced in tolerance class M with execution X, ensuring repeatable fit and reliable seating in tool bodies. Specification clarity — from the grade WKK25G to the chipbreaker and form — simplifies process planning and tool selection. For engineers assessing tool life and process stability, the insert provides measurable benefits in wear resistance and repeatability, supporting a reduction in scrap and rework. For application-specific recommendations or to procure the ROMX1204M0T8-A27 WKK25G insert from Walter Tools, contact Metav Werkzeuge for tailored advice and immediate availability. Technical Data Article number: ROMX1204M0T8-A27-WKK25G-WALTER Label: Fräswendeschneidplatte ROMX1204M0T8-A27 WKK25G Walter Tools Brand: Walter Tools Facts Size/form: 12 (round insert) Thickness: 04 Chipbreaker: A27 Tolerance class: M Special features Tiger·tec Gold coating Coated carbide grade WKK25G Suitable for cast iron (K) Round insert geometry Execution: X Series: Tiger-tec Gold ISO designation: ROMX1204M0T8-A27 WKK25G FAQ What materials is this insert intended for? The insert is specified for cast iron machining; the WKK25G grade and Tiger·tec Gold coating are optimised for abrasive cast iron applications. How does the A27 chipbreaker affect chip control? The A27 geometry is designed to produce short, controlled chips when machining cast iron, improving process reliability and reducing manual chip handling. Is this insert compatible with standard round insert holders? Yes, the ROMX1204M0T8-A27 form factor and tolerance class M make it compatible with holders designed for 12 mm round inserts. Which features contribute most to tool life? The coated carbide grade WKK25G combined with the Tiger·tec Gold coating provides enhanced abrasion resistance, which is the primary contributor to extended tool life during cast iron machining. Can this insert be used for finishing and semi-finishing? The round geometry and chipbreaker make the insert suitable for semi-finishing and finishing operations on cast iron, offering stable cutting and consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com