ROMX1204M0T8-A27 WKP35G Wendeplatten - Walter Tools
The ROMX1204M0T8-A27 WKP35G insert combines Tiger·tec Gold wear resistance with a dedicated chipbreaker A27 for stable chip control, making it a productive choice for steel and cast iron milling; order directly via Metav Werkzeuge or consult their specialists for application support. ROMX1204M0T8-A27 WKP35G indexable milling insert – Walter Tools (Tiger·tec Gold, for steel & cast iron) ROMX1204M0T8-A27 WKP35G is a round indexable milling insert designed for productive machining of steels and cast irons, offering a coated-carbide grade optimised for stable cutting performance in a wide range of milling applications. Tiger·tec Gold coating for extended tool life Optimised chip control with A27 chipbreaker Suitable for steel and cast iron machining Round insert, 12 size, tolerance class M Consistent edge life through advanced coating technology The combination of Tiger·tec Gold technology and the WKP35G grade delivers coated carbide performance that resists abrasive wear during typical steel and cast iron operations. The coating system reduces flank and crater wear, which results in longer intervals between indexings and fewer unplanned tool changes. This stability is particularly beneficial where reproducible results are required in series production; the formation of a reliable wear layer helps to maintain dimensional accuracy over extended cuts. Predictable chip formation for safer, faster machining Equipped with a specific chipbreaker A27 and a round form, the insert promotes controlled chip breaking and smooth engagement at varying depths of cut. The chipbreaker design reduces the risk of long, stringy chips and supports efficient evacuation, which improves process reliability and surface finish. The tolerance class M and the dimension code 12 with 04 thickness code ensure that the insert seats consistently in compatible milling cutter bodies, reducing runout and vibration during high-feed or interrupted cuts. Versatile application and measurable production benefits Rated for ISO P/K materials, the insert is suitable for machining unalloyed and alloyed stahl as well as gusseisen, offering process security across common workshop tasks. Using a grade optimised for both material groups minimises tool inventories and simplifies grade selection. In practice, fewer insert changes and stable cutting conditions translate into higher machine uptime and better overall productivity; the economical profile supports both roughing passes and geometry-dependent finishing when combined with the correct cutter body and cutting data. Contact Metav Werkzeuge for tailored application advice on the Walter Tools ROMX1204M0T8-A27 WKP35G indexable milling insert and to confirm cutter compatibility and recommended cutting data — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ROMX1204M0T8-A27-WKP35G-WALTER Name: Fräswendeschneidplatte ROMX1204M0T8-A27 WKP35G Manufacturer: Walter Tools Core dimensions & tolerances Insert form: Round Size: 12 Thickness code: 04 Chipbreaker: A27 Tolerance class: M Materials & features Series: Tiger·tec Gold Grade: WKP35G Substrate/coating: Coated carbide Material suitability: ISO P (Steel), ISO K (Cast iron) Execution: X FAQ What materials is this insert suitable for? The ROMX1204M0T8-A27 WKP35G insert from Walter Tools is specified for ISO P (steel) and ISO K (cast iron), making it suitable for a broad range of unalloyed and alloyed steels as well as typical cast-iron grades. How does the A27 chipbreaker affect machining performance? The chipbreaker A27 promotes controlled chip segmentation and reliable evacuation; with the round geometry this reduces vibrations and supports consistent surface quality when the ROMX1204M0T8-A27 WKP35G insert is used in appropriate cutter bodies. Which cutter bodies accept this ROMX insert? The ROMX1204M0T8-A27 WKP35G is designed for milling systems that accept the ROMX1204M0T8-A27 form inserts; compatibility depends on the cutter body pocket geometry and clamping system, so matching the insert code with the cutter manufacturer specification is recommended. What production benefits can be expected from using this grade? Using the WKP35G grade in the Tiger·tec Gold series typically yields improved tool life and stable cutting performance across steel and cast iron applications, reducing index changes and supporting higher overall productivity in series production. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1204M0T8-A27 WKP35S X Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S grade and the A27 chipbreaker for consistent, productive milling of steel and cast iron; order directly via Metav Werkzeuge or consult the Metav team for application advice. ROMX1204M0T8-A27 WKP35S — Fräswendeschneidplatte (milling insert) for steel and cast iron by Walter Tools A robust ROMX1204M0T8-A27 WKP35S milling insert engineered for general milling tasks, optimised for reliable chip control and long tool life in steel and cast iron machining. ROMX1204M0T8-A27 WKP35S by Walter Tools Tiger·tec Silver coating for stable tool life Suitable for steel (P) and cast iron (K) Round 12 insert with A27 chipbreaker Longer running times and predictable edge stability for productive milling The insert combines the Tiger·tec Silver coating with the WKP35S grade to deliver stable wear behaviour and consistent cutting performance. The coating reduces abrasive wear on the cutting edge, while the grade composition supports repeatable operation under typical steel and cast iron cutting conditions. This results in fewer tool changes and a more predictable production rhythm, helping to reduce non-productive time in medium- to high-volume milling. Reliable chip control and surface quality with a dedicated chipbreaker Equipped with an A27 chipbreaker, the insert offers controlled chip formation that reduces the risk of built-up edge and improves surface finish. The chip geometry is optimised for interrupted and continuous cuts commonly encountered in general milling, which helps to maintain dimensional accuracy and reduces the need for secondary finishing. Improved chip evacuation also contributes to safer, cleaner working conditions at the machine. Geometry and form designed for flexible milling strategies The round insert shape and size code 12 give flexibility for different milling strategies and radii requirements. The insert’s design supports stable cutting in a variety of toolholders and milling cutters, enabling efficient material removal rates without compromising tool life. The tolerance class M ensures consistent seat fit and repeatable mounting, which supports process stability and reduces assembly time during tool changes. Application-oriented performance across common machinable groups Designed primarily for the ISO groups P (steel) and K (cast iron), the cutting material and coating balance thermal and abrasive resistance to cope with the specific challenges of these workpiece materials. The insert’s coated carbide construction is suited to the heat and chip characteristics of steel and to the abrasive nature of cast iron, providing a reliable all-round solution for workshops and production lines that require versatile performance from a single insert type. For detailed application guidance or to secure the right quantity of Walter Tools inserts for a specific process, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation and fast delivery. Technical Data Article number: ROMX1204M0T8-A27-WKP35S-WALTER Label: Fräswendeschneidplatte ROMX1204M0T8-A27 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Grade: WKP35S Facts Plate size: 12 Thickness code: 04 Tolerance class: M Form: Round Special features Coating: Tiger·tec Silver Material: P / K (steel and cast iron) Chipbreaker: A27 Type: Coated carbide Designation: ROMX1204M0T8-A27 WKP35S FAQ What materials is this insert suitable for? The ROMX1204M0T8-A27 WKP35S insert is designed for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What does the Tiger·tec Silver coating achieve? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and improves thermal resistance, which helps to lengthen tool life and stabilise performance during prolonged milling. How does the A27 chipbreaker affect machining? The A27 chipbreaker is tuned for controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during both continuous and interrupted cuts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1605M0-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold performance and the durable WKP35G coated carbide to secure reliable chip control and broad material capability; order the insert directly via Metav Werkzeuge or consult our experts for application-specific advice. ROMX1605M0-D57 WKP35G — Walter Tools indexable milling insert, Tiger·tec Gold, round 16 mm The ROMX1605M0-D57 WKP35G is a round indexable milling insert engineered for productive machining of steel and cast iron in a wide range of milling operations Tiger·tec Gold coated carbide Optimised for steel and cast iron Round insert, 16 mm diameter D57 chipbreaker for secure chip control High productivity through advanced coating technology The combination of the WKP35G grade with the Tiger·tec Gold coating delivers measurable process advantages in steel and cast iron machining. Designed as a coated carbide insert, it provides enhanced wear resistance and improved heat management compared with uncoated grades. This results in more consistent cutting performance and extended tool life, which supports higher component throughput and reduced machine downtime. The formulation is tuned to the typical thermal and chip-formation conditions of ISO P (steel) and ISO K (cast iron) materials, enabling reliable productivity across mixed production runs. Consistent chip control and precise geometry for predictable results The round geometry and the D57 chipbreaker ensure stable chip formation and evacuation, helping to prevent recutting and to maintain surface finish. At 16 mm diameter with a thickness of 0.5 mm and M tolerance class, the insert fits systems specified for the ROMX1605M0-D57 designation and offers repeatable seating and indexing accuracy. These geometric features reduce set-up variance and make wear behaviour more predictable, which supports process planning and quality control in series production. The design emphasises secure clamping and a robust cutting edge to support reproducible results over multiple indexings. Practical integration and application advice for shop-floor use The insert is intended for use in milling cutters compatible with the ROMX1605M0-D57 geometry and is primarily specified for machining steel and cast iron according to ISO groupings. Selection of cutting parameters should consider workpiece hardness, coolant strategy and depth of cut to exploit the Tiger·tec Gold advantages fully. For operations where chip control and tool life are priorities, pairing the insert with suitable cutter bodies and optimised feeds can lower total machining costs. If further machining data or compatibility checks are required, technical consultation is available to tailor the solution to specific production requirements. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and secure the correct ROMX1605M0-D57 WKP35G for your machining needs Technical data Article number: ROMX1605M0-D57-WKP35G-WALTER Name: Fräswendeschneidplatte ROMX1605M0-D57 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Shape: Round Designation: ROMX1605M0-D57 Core data Diameter: 16 mm Thickness: 0.5 mm Chipbreaker: D57 Tolerance class: M Execution: X Special features Coated carbide grade WKP35G (Tiger·tec Gold) Application: Steel (ISO P), Cast iron (ISO K) Suitable for indexable milling operations Stable chip formation and predictable wear FAQ What materials is the ROMX1605M0-D57 WKP35G suitable for? The ROMX1605M0-D57 WKP35G is specified for steel (ISO P) and cast iron (ISO K), with the coating and grade tuned to typical wear and chip-formation conditions in these material groups. What are the key geometric specifications of this insert? The insert ROMX1605M0-D57 WKP35G is a round format with a 16 mm diameter, a thickness of 0.5 mm, a D57 chipbreaker and an M tolerance class, suitable for cutters designed for the ROMX1605M0-D57 designation. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold on the ROMX1605M0-D57 WKP35G improves wear resistance and thermal stability, leading to more consistent cutting performance and longer service life under typical steel and cast iron machining conditions. Can the ROMX1605M0-D57 WKP35G be used in standard cutter bodies? The ROMX1605M0-D57 WKP35G is designed for integration into cutter systems that accept ROMX1605M0-D57 geometry; compatibility depends on the cutter body specification and clamping system. How should chip control be managed with this insert? Chip control with the ROMX1605M0-D57 WKP35G is supported by the D57 chipbreaker; selecting appropriate feed rates and depths of cut for the workpiece material helps maintain consistent chip formation and surface quality. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the respective trademark owners. The offered item is an original, factory-new product of the manufacturer.
ROMX1605M0-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and reliable chip control in mixed production of steel and cast iron; order the ROMX1605M0-D57 WKP35S milling insert via Metav Werkzeuge or consult the team for selection support. ROMX1605M0-D57 WKP35S – round milling insert with Tiger·tec Silver coating (Walter Tools) The ROMX1605M0-D57 WKP35S is a round indexable milling insert designed for productive machining of steel and cast iron, optimised for stable chip formation and consistent edge life. Tiger·tec Silver coating for extended tool life WKP35S grade optimised for steel and cast iron Round 16 mm insert with D57 chipbreaker Longer tool life and predictable manufacturing costs The combination of the Tiger·tec Silver coating and the WKP35S carbide grade delivers a robust cutting edge that resists abrasive wear and thermal degradation. Coated carbide technology provides a protective layer that reduces flank wear and maintains cutting geometry over longer intervals, which translates into fewer tool changes and lower cost per component. For production environments where process stability is critical, this insert supports consistent cycle times and easier planning of tool-change intervals. The design focuses on measurable performance gains rather than vague promises, so toolroom managers can quantify improvements in uptime and tooling budgets. Reliable chip control and suitability for steels and cast irons The D57 chipbreaker and the round geometry create predictable chip forms when machining typical ISO group P (steel) and K (cast iron) materials. Round inserts are advantageous in interrupted cuts and heavy crop milling because the contact angle distributes cutting forces and reduces the risk of edge chipping. The cutting geometry is tailored to handle both ductile steels and the more abrasive, breakable chips of cast iron, improving surface finish and reducing secondary operations. In practice, this means fewer stoppages for chip clearing and more stable machining when workpieces vary in microstructure or hardness. Easy integration into production with consistent tolerance control With a compact size and tolerance class M, the insert fits common milling toolholders and clamping systems with minimal setup adjustment, shortening changeover times on the shop floor. The round 16 mm plate thickness and geometry simplify inventory management when a single insert type can cover a range of milling tasks. Backed by Walter Tools’ process know-how, the design supports reproducible results across shifts and machines, which helps maintain part quality and reduces scrap. For specification checks or tailored recommendations, Metav Werkzeuge can provide application guidance and help match cutting parameters to the chosen workpiece material. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Silver inserts and to ensure the ROMX1605M0-D57 WKP35S fits the intended machining cycle Technical Data SKU: ROMX1605M0-D57-WKP35S-WALTER Label: Fräswendeschneidplatte ROMX1605M0-D57 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Milling insert Series: Tiger-tec Silver Grade: WKP35S Form: Round (R) Designation: ROMX1605M0-D57 Facts Insert size: 16 Plate thickness: 05 Chipbreaker: D57 Tolerance class: M Material grouping: P / K Special features Coating and grade: Tiger·tec Silver; coated carbide Application: Steel and cast iron machining Geometry: round insert for stable engagement Suitability: designed for stable chip formation and productive milling FAQ What materials is this insert suitable for? The ROMX1605M0-D57 WKP35S insert is designed primarily for machining steel and cast iron (ISO groups P and K) with optimised chip control and wear resistance. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive and thermal wear, extending edge life and contributing to predictable tool-change intervals for higher overall equipment effectiveness. What does the D57 chipbreaker do in practice? The D57 chipbreaker shapes chip formation to suit both ductile and brittle materials, helping to avoid long stringy chips and improving surface finish during milling operations. Is this insert compatible with standard toolholders for round plates? Yes, the round geometry and tolerance class M allow straightforward integration into common toolholders for milling applications where round indexable inserts are specified. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
ROMX1605M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear protection and the WPP35G coated-carbide grade for consistent performance in steel machining; the round geometry with D57 chipbreaker supports reliable chip control and stable cutting. Order directly via Metav Werkzeuge or consult our specialists for application advice. ROMX1605M0-D57 WPP35G milling indexable insert, round, for steel — Walter Tools The ROMX1605M0-D57 WPP35G is a round milling insert designed for productive steel machining, offering coated-carbide durability and a D57 chipbreaker for controlled chip formation. Tiger·tec Gold coating for improved wear resistance Coated carbide grade WPP35G for steel applications Round 16 size with D57 chipbreaker Medium tolerance class M for stable mounting Consistent cutting performance for steel operations The combination of Tiger·tec Gold coating and the WPP35G grade yields a balance of wear resistance and toughness specifically tailored for steel (ISO group P) machining. The coating reduces flank and crater wear under the heat and stresses typical of steel cutting, which translates into longer edge life and fewer interruptions. As a coated carbide insert, the component tolerates higher cutting temperatures than uncoated grades, enabling steady tool performance over extended cutting times and supporting predictable cycle planning in production. Reliable chip control and tool stability The D57 chipbreaker geometry is engineered to form compact, controllable chips when turning and light milling steel, decreasing the risk of re-cutting and facilitating safe chip evacuation. The round form and the insert’s thickness code ensure a secure seating in standard toolholders, and the tolerance class M supports repeatable positioning in multi-edge applications. For workshops seeking process reliability, these features reduce downtime caused by chip-related issues and contribute to consistent surface finishes with minimal operator intervention. Practical benefits in workshop use and economy Using this indexable insert in serial production brings immediate practical advantages: fewer insert changes, reduced tool inventory complexity through a versatile grade, and improved uptime. The insert’s suitability for a wide spectrum within steel workpiece groups supports a consolidated tooling strategy, which can lower overall tooling costs and simplify logistics. Clear labelling and standard ISO designation ease tool management and help technicians match insert grade to cutting parameters quickly. Brand quality and application guidance Manufactured under the Walter Tools reputation for precision tooling, this round milling insert aligns with expectations for robust edge integrity and repeatable performance. The WPP35G sort is optimised for steel machining demands and benefits from Walter’s material and coating know-how; this makes it a reliable choice where stable chip formation and sustained productivity are priorities. For uncertain applications or when transferring processes between machines, technical consultation is recommended to select the correct cutting data and holder combination. Discuss Walter Tools Tiger·tec Gold solutions with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical recommendations and supply options. Technical data Article number: ROMX1605M0-D57-WPP35G-WALTER Label: Fräswendeschneidplatte ROMX1605M0-D57 WPP35G Walter Tools Manufacturer: Walter Tools Core specifications Size: 16 Thickness code: 05 Chipbreaker: D57 Grade: WPP35G Tolerance class: M Design & features Coating technology: Tiger·tec Gold Material: Coated carbide (insert) Geometry: Round insert Application group: P (steel) Execution code: X Series: Tiger-tec Gold ISO designation: ROMX1605M0-D57 WPP35G FAQ What materials is this insert intended for? The insert is specified for steel machining (ISO group P); the WPP35G grade and Tiger·tec Gold coating are optimised for typical heat and chip behaviour when cutting steel. How does the chipbreaker D57 affect performance? The D57 chipbreaker promotes compact chips and controlled evacuation in steel operations, improving safety and helping to maintain consistent surface quality with the round insert geometry. Is this insert suitable for heavy interrupted cuts? The WPP35G coated-carbide grade offers toughness and wear resistance that improve performance under variable cutting conditions, but cutting data and holder rigidity should be verified for severe interruptions. How should the insert be identified in inventory? Use the ISO designation ROMX1605M0-D57 WPP35G and the SKU ROMX1605M0-D57-WPP35G-WALTER to ensure correct grade, chipbreaker and series tracking. What are the main benefits of Tiger·tec Gold on this insert? Tiger·tec Gold coating increases resistance to flank and crater wear, allowing higher process stability and extended edge life when machining steel. Manufacturer: Walter AG (brand: Walter Tools); head office in Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
ROMX1605M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G grade and a compact round 16 mm form for reliable machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. ROMX1605M0-D57 WSM35G round milling insert — Tiger·tec Gold, Walter Tools The ROMX1605M0-D57 WSM35G is a round indexable milling insert optimised for heavy‑duty machining of stainless steel and heat‑resistant superalloys, combining thermal stability with secure chip control. Tiger·tec Gold coating for heat resistance Optimised for stainless steel and superalloys Round 16 mm insert with D57 chipbreaker Robust grade WSM35G for stable cutting edges High thermal resistance that secures machining performance The combination of the Tiger·tec Gold coating with the WSM35G substrate delivers enhanced temperature resistance and improved wear behaviour under sustained cutting conditions. This results in a reduction of unexpected tool changes and a more consistent machining cycle. The coated cemented‑carbide chemistry provides a protective barrier against abrasive and adhesive wear mechanisms common when machining stainless steel. Operators can expect longer edge life and steadier dimensional results during extended runs, which supports predictable throughput in serial production. Designed for stainless steel and demanding alloys Selected for ISO groups M and S, the grade thrives where both adhesion and thermal load are critical factors. The geometry and the D57 chipbreaker are tailored to produce manageable chips when cutting tough, ductile materials; this enhances process security and reduces the need for frequent manual intervention. In practical terms, the insert is suitable for components where surface integrity and repeatability are required—particularly in stainless applications and challenging superalloy workpieces—offering a balance between controlled chip formation and a stable cutting edge. Geometry and handling that aid productivity The round 16 mm format provides a compact footprint while maintaining multiple cutting edges per indexable insert, enabling cost‑effective index changes without compromising stiffness. The round plate shape supports varied engagement angles and is forgiving under interrupted cuts, which benefits mixed‑operation workpieces and tough milling tasks. The thickness and tolerance class M ensure consistent seating and repeatable positioning in compatible insert holders, allowing shops to integrate the insert into existing tool sets with minimal adjustment. Predictable edge life and process reliability With a focus on reliable chip formation and edge stability, the WSM35G grade reduces the risk of build‑up and edge chipping typical of stainless steel machining. The combined material and coating technology is engineered to maintain a sharp cutting profile over longer cycles, supporting higher cumulative material removal before regrinding or replacement. This predictability supports process planning and can improve overall machine utilisation, contributing to efficient production flows and fewer unscheduled interruptions. For application‑specific recommendations or to specify the ROMX1605M0‑D57 WSM35G Tiger·tec Gold insert for stainless steel operations, contact Metav Werkzeuge for detailed technical advice and order support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: ROMX1605M0-D57-WSM35G-WALTER Label: Fräswendeschneidplatte ROMX1605M0-D57 WSM35G Walter Tools UID: ROMX1605M0-D57-WSM35G-WALTER Core specifications Insert diameter: 16 mm Thickness code: 05 Tolerance class: M Plate form: Round Chipbreaker: D57 Materials & features Grade: WSM35G (Tiger·tec Gold) Coating type: coated cemented carbide Suitable for: stainless steel (ISO group M) Also suitable for: heat‑resistant superalloys and titanium (ISO group S) Series: Tiger·tec Gold FAQ What materials is this insert intended for? The ROMX1605M0‑D57 WSM35G insert is specified for stainless steel (ISO group M) and is also suitable for heat‑resistant superalloys and titanium (ISO group S), reflecting the grade’s focus on thermal stability and secure chip control. What are the main benefits of the Tiger·tec Gold coating? Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and wear protection, helping the insert maintain a stable cutting edge and extend useful life under demanding milling conditions. How does the D57 chipbreaker influence machining? The D57 chipbreaker produces controlled chip formation for ductile and work‑hardening materials, improving process security and helping to avoid entangling or long stringy chips during milling of stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1605M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile material compatibility (Stahl, rostfreier Stahl, heat‑resistant alloys) and precise D57 chip control for consistent milling results. Order the ROMX1605M0‑D57 WSP45G directly via Metav Werkzeuge or consult the technical team for application support. ROMX1605M0‑D57 WSP45G Fräswendeschneidplatte – Tiger·tec Gold coating, round insert for versatile milling, Walter Tools ROMX1605M0‑D57 WSP45G is a round milling indexable insert designed for reliable material removal across Stahl, rostfreier Stahl and heat‑resistant superalloys Tiger·tec Gold PVD coating for edge stability Coated carbide grade WSP45G for milling For Stahl, rostfreier Stahl and heat‑resistant alloys Round insert Ø16 with D57 chipbreaker Consistent milling performance through advanced coating The ROMX1605M0‑D57 WSP45G insert combines a coated carbide substrate with the Tiger·tec Gold PVD technology to deliver extended tool life and stable cutting edges. The combination of coating and substrate reduces flank wear and helps maintain dimensional accuracy during prolonged runs. This design is particularly effective where thermal load is high: the PVD layer provides heat resistance, while the substrate supports mechanical strength. As a result, the insert supports predictable tool changes and fewer interruptions to production, improving overall process efficiency and cost effectiveness. Stable chip control and improved surface finish A round insert geometry with the D57 chipbreaker supports controlled chip segmentation and evacuation under varying cutting conditions. The rounded profile provides smooth transitions during axial engagement, reducing vibration and promoting a consistent surface finish. For milling applications where chip control is crucial—such as interrupted cuts or mixed‑material batches—the geometry helps avoid built‑up edge and unstable chips. This leads to improved repeatability and fewer rework steps, which is valuable for batch production and high‑mix environments. Material range and recommended applications The grade WSP45G is developed for versatile use across the ISO groups P / M / S, meaning suitability for Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. The composition and coating balance toughness and wear resistance to manage the different challenges each group presents: heat generation in Stahl, adhesion tendencies in rostfreier Stahl and the abrasive or adhesive nature of superalloys. Typical applications include general milling, profile and shoulder milling where a robust, multi‑purpose insert reduces tool inventory and simplifies grade selection. For fine finishing, the stability of the cutting edge supports consistent surface quality with fewer passes. Contact Metav Werkzeuge today for tailored application advice or to request the ROMX1605M0‑D57 WSP45G from Walter Tools; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data SKU: ROMX1605M0-D57-WSP45G-WALTER Article: ROMX1605M0-D57 WSP45G Type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Core specifications Insert size: 16 Thickness: 05 Chipbreaker: D57 Form: Round Tolerance class: M Materials & features Grade: WSP45G (coated carbide) Coating technology: Tiger·tec Gold (PVD) Material suitability: Stahl; rostfreier Stahl; heat‑resistant superalloys and titanium Execution: X FAQ What materials can be machined with this insert? The ROMX1605M0‑D57 WSP45G insert is suitable for Stahl, rostfreier Stahl and heat‑resistant superalloys (ISO groups P / M / S), offering a versatile solution across these material families. Which chipbreaker is fitted and what benefit does it provide? The insert features the D57 chipbreaker, which promotes controlled chip formation and improved evacuation, helping to maintain surface finish and process stability during milling. Is the WSP45G grade suitable for finishing operations? Yes, the WSP45G grade with Tiger·tec Gold coating delivers edge stability and wear resistance that support finishing passes while also being robust enough for roughing applications. What is the insert geometry and clamping form? This is a round indexable insert (Ø16) designed for flexible engagement angles and smooth axial transitions, enabling reliable performance in a range of milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
ROMX1605M08-D57 WKK25G Wendeplatten - Walter Tools
Taking advantage of Tiger·tec Gold wear resistance and the WKK25G grade tailored for cast iron machining delivers consistent tool life and stable chip formation; the round 16 mm form with D57 chipbreaker supports reliable chip control and surface quality. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific optimisation. ROMX1605M08-D57 WKK25G – round milling insert, Tiger·tec Gold, for cast iron | Walter Tools The ROMX1605M08-D57 WKK25G is a round milling indexable insert engineered for efficient, high-performance machining of cast iron, combining a Tiger·tec Gold coating with a D57 chipbreaker for stable cutting in interrupted and continuous milling. Tiger·tec Gold coating for wear resistance Optimised for abrasive cast iron machining Round 16 mm form with D57 chipbreaker Boosted productivity through advanced coating technology The coated carbide grade WKK25G from the Tiger·tec Gold family is formulated for abrasive cast iron applications, where frequent, brittle chips and hard inclusions challenge tool life. The combination of a robust multi-layer coating and a wear-oriented substrate reduces flank and crater wear, which in turn extends tool life and increases cumulative cutting time between changes. This performance translates into fewer tool exchanges, lower tooling consumption and steadier machine uptime — measurable benefits for batch production and continuous milling operations. Reliable chip control for consistent surface quality The D57 chipbreaker geometrically favours short, manageable chips in interrupted cuts and during heavy-engagement passes, limiting chip entanglement and protecting the workpiece finish. The round insert geometry ensures even load distribution around the cutting edge, which supports stable cutting forces and a consistent contact zone. As a result, the machining process yields improved surface quality and reduced risk of rework, particularly in operations where cast iron’s microstructure can produce irregular chip shapes. Designed for straightforward process integration Marked to ISO group K for cast iron, the ROMX1605M08-D57 uses a proven insert form and tolerance class M, enabling straightforward clamping and replacement in standard toolholders. The insert thickness code and execution offer compatibility with common milling cutters, so integration into existing tool assemblies is uncomplicated. The coated grade’s balance between edge robustness and toughness helps in mixed-operation environments where interrupted cuts and moderate entry angles are routine, providing a reliable baseline for machining parameter selection. Practical selection and application advantages Specifying the ROMX1605M08-D57 WKK25G supports process reliability and reproducible results across series production. The grade’s emphasis on wear resistance and stable chip formation reduces unexpected scrap and promotes predictable tool-change intervals, which benefits planning and overall equipment effectiveness. For customers seeking to refine feeds and speeds or to match insert geometry to a specific cutter body, technical advice is available to align cutting data with machine capability and component quality targets. Contact Metav Werkzeuge today for tailored application advice on the ROMX1605M08-D57 WKK25G by Walter Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed parameter support and ordering. Technical data SKU: ROMX1605M08-D57-WKK25G-WALTER Article designation: ROMX1605M08-D57 WKK25G Manufacturer: Walter Tools Product type: Milling indexable insert (fräswendeschneidplatte) Facts Insert form: Round Size / diameter: 16 Thickness code: 05 Chipbreaker: D57 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKK25G (coated carbide) Execution: X Suitable for: cast iron (ISO group K) Storytrigger: wendeplatten FAQ What materials is this insert intended for? The ROMX1605M08-D57 WKK25G by Walter Tools is intended primarily for cast iron (ISO group K), with the grade and chipbreaker optimised for abrasive, brittle chip behaviour. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKK25G grade increases wear resistance and thermal stability, which helps to extend cutting edge life and maintain consistent performance during production runs. Which chipbreaker should be selected for interrupted cuts? The D57 chipbreaker integrated in this round insert is suitable for interrupted and mixed cuts in cast iron, producing short chips and improving evacuation to reduce re-cutting risk. Is this insert compatible with standard round insert toolholders? Yes; the ROMX1605M08-D57 WKK25G uses a conventional round insert form and a tolerance class M, allowing secure seating in standard milling cutter bodies designed for 16 mm round inserts. Hersteller: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1605M08-D57 WKP35G Wendeplatten - Walter Tools
The ROMX1605M08-D57 WKP35G combines the robustness of a Tiger·tec Gold grade with stable chip control and a compact round form for efficient machining of steel and cast iron; benefit from consistent tool life and reliable repeatability and order directly via Metav Werkzeuge or consult the technical team for application advice. ROMX1605M08-D57 WKP35G milling indexable insert – Tiger·tec Gold, Ø16 mm | Walter Tools The ROMX1605M08-D57 WKP35G is a round milling insert engineered for productive machining of steel and cast iron, optimised for stable cutting performance in demanding industrial operations. Tiger·tec Gold coating for high process security Suitable for steel and cast iron machining Round insert, Ø16 mm for flexible milling Stable chip control with D57 chipbreaker Maximise uptime through reliable grade and coating The combination of the WKP35G grade and Tiger·tec Gold coating prioritises process stability and long tool life when machining steel and cast iron. The coated carbide composition provides enhanced resistance to thermal and abrasive wear, meaning fewer tool changes and more predictable production cycles. For users accustomed to frequent interruptions caused by edge wear, this insert supports a smoother workflow and more consistent component tolerances over longer runs. Consistent chip formation and secure cutting with D57 geometry The D57 chipbreaker is designed to manage the short, often brittle chips typical of cast iron and the continuous chips from steels, improving evacuation and reducing interference with the machining zone. Improved chip control reduces rework risk and cleaning time at the machine, which translates into measurable productivity gains. The round geometry further enhances strength at the cutting edge, offering robustness under interrupted cuts and heavy engagement. Practical benefits from shape, tolerance and series design The round plate form with a size designation of 16 and a thickness designation of 05 combines multiple cutting edges with a compact footprint, enabling flexible application across a range of milling fixtures. The tolerance class M ensures repeatable seating and reliable clamping accuracy in standard toolholders. These design choices mean fewer set-up adjustments and consistent performance across batch production, especially where repeatability and short cycle times are required. Clear application scope and process advantages Marked for ISO groups P (steel) and K (cast iron), the insert is tailored to handle the thermal loads and wear characteristics of these material families. The result is an insert that supports both roughing and productive semi-finishing passes where stable edge life and reproducible surface results are priorities. The combination of grade, coating and chipbreaker delivers a pragmatic balance between edge robustness and surface integrity, suitable for industrial shops seeking steady, economical machining results. For tailored recommendations on the Walter Tools Tiger·tec Gold insert ROMX1605M08-D57 WKP35G or assistance selecting the correct version for a specific application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical advice and rapid supply Technical data SKU: ROMX1605M08-D57-WKP35G-WALTER Label: Fräswendeschneidplatte ROMX1605M08-D57 WKP35G Walter Tools Product type: milling indexable insert Series: Tiger·tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Plate size designation: 16 Plate thickness designation: 05 Chipbreaker: D57 Tolerance class: M Material group suitability: P / K Special features Coated carbide grade WKP35G Round plate form for robust cutting edge Engineered for steel and cast iron machining Series focus on process security and wear resistance FAQ What materials is this insert suitable for? The ROMX1605M08-D57 WKP35G is specified for ISO groups P and K, which means it is intended for machining steel and cast iron. What does WKP35G indicate? WKP35G denotes Walter Tools' coated carbide cutting grade within the Tiger·tec Gold family, optimised for wear resistance and process stability. How does the round form influence performance? A round plate delivers a strong cutting edge and multiple usable cutting corners, increasing robustness under interrupted cuts and extending usable life between indexings. What is the benefit of the D57 chipbreaker? The D57 geometry improves chip control for both the short, breaking chips from cast iron and the continuous chips from many steels, aiding evacuation and surface quality. Is the tolerance class M relevant for clamping accuracy? Yes, tolerance class M provides a medium tolerance standard that supports reliable seating and repeatable clamping in compatible holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) is a leading global manufacturer of precision metalworking tools and is part of the Swedish Sandvik group. Protected trademarks and product names belong to their respective owners. Brand names and registered trademarks are used for explanatory purposes only. The offered item is an original, factory-new product from the manufacturer.
ROMX1605M08-D57 WPP35G WPP35G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coated carbide grade and a dedicated D57 chipformer provides consistent cutting performance and reliable chip control in steel machining; order the insert directly via Metav Werkzeuge or request application advice from their specialists. ROMX1605M08-D57 WPP35G round milling insert — high-performance steel machining by Walter Tools The ROMX1605M08-D57 WPP35G is a round milling insert engineered for efficient removal of steels, offering a coated‑carbide grade designed for balanced wear resistance and toughness. Coated carbide Tiger·tec Gold WPP35G Controlled chip formation with D57 breaker Round insert, size 16 mm Tolerance class M for consistent fit Optimised for steel machining (ISO P) Consistent productivity through a coated‑carbide grade The combination of the Tiger·tec Gold technology and the WPP35G grade yields a wear‑resistant, coated carbide that is tuned for the thermal and mechanical demands of steel machining. This results in extended tool life and fewer insert changes, which improves uptime and reduces tooling costs per component. The manufacturing tolerance M ensures reliable interchangeability across compatible toolholders, supporting efficient set‑ups and repeatable dimensions in series production. Emphasis on measurable process stability contributes to predictable machining results and easier process planning. Predictable chip control and surface quality An optimised chipformer D57 provides controlled chip breakage and evacuation, reducing the risk of chip re-cutting and heat concentration at the cutting edge. Controlled chips contribute directly to a cleaner cutting zone and a more consistent surface finish, lowering the need for secondary operations. The round geometry of the insert spreads cutting forces and can support stable engagement strategies, particularly in interrupted cuts or trochoidal milling, where predictable chip behaviour enhances both component quality and machine load management. Simple integration and operational reliability The round insert form and the clear designation of the series simplify tool selection and permit straightforward integration into existing tool systems. The grade is explicitly intended for steel (ISO P) applications, giving clarity for material selection and cutting data. Robust coating characteristics and the coated‑carbide substrate help maintain a sharp cutting edge over longer cycles, supporting reproducible process windows and reducing the frequency of tool changes. Overall, the design aims to combine operational reliability with efficient chip control for productive machining. For application-specific recommendations on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and batch availability Technical data SKU: ROMX1605M08-D57-WPP35G-WALTER Label: Fräswendeschneidplatte ROMX1605M08-D57 WPP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WPP35G Core specifications Insert size: 16 Thickness code: 05 Chipbreaker: D57 Tolerance class: M Material code: P (steel) Form: Rund Special features Coated carbide grade (Tiger·tec Gold) Optimised for steel machining (ISO P) Stable chip formation characteristics Designed for consistent fit and repeatability Suitable for productive cutting strategies FAQ What materials is this insert designed for? The ROMX1605M08-D57 WPP35G is optimised for steel machining (ISO P), with its WPP35G grade tailored to the thermal and chip formation behaviour typical of steels. How does the D57 chipbreaker affect machining? The D57 chipformer provides controlled chip breakage and reliable evacuation, which helps maintain surface quality and reduces the risk of recutting and heat concentration at the edge. Is this insert compatible with standard round insert toolholders? The round form and tolerance class M support consistent fitment in compatible toolholders; verify seat geometry and clamping system to ensure secure installation. What performance benefits does the Tiger·tec Gold technology deliver? Tiger·tec Gold coating enhances wear resistance and edge stability, offering an improved balance between durability and toughness for extended tool life in steel applications. Can this insert be used for interrupted cuts or trochoidal milling? Yes, the round geometry and robust coated‑carbide grade make the insert suitable for strategies involving intermittent engagement, where chip control and edge stability are important. Manufacturer: Walter Tools Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1605M08-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of thermal stability from the Tiger‑tec Gold coating and reliable chip control from the D57 chipbreaker for consistent productivity; order the ROMX1605M08-D57 WSM35G directly via Metav Werkzeuge or ask our consultants if needed. ROMX1605M08-D57 WSM35G — Round milling insert (Tiger‑tec Gold, D57) by Walter Tools A ROMX1605M08-D57 WSM35G round indexable milling insert engineered for machining rostfreier Stahl and heat‑resistant superalloys in demanding milling applications. Tiger‑tec Gold coating for heat resistance Optimised D57 chipbreaker for stable chip control Round insert, 16 mm size for interrupted cuts Suitable for rostfreier Stahl and superalloys High thermal resistance for demanding alloys The Tiger‑tec Gold coating combined with the WSM35G grade provides enhanced thermal stability and wear resistance during high‑temperature cutting of rostfreier Stahl and nickel‑base alloys. Coated carbide construction ensures a progressive wear pattern that preserves the cutting edge under heavy load, so cycle times remain consistent and tool changes are less frequent. This proven surface technology supports predictable tool behaviour, which is essential for automated production and batch machining where reproducible results matter. Reliable chip control and edge stability The D57 chipbreaker geometry promotes controlled chip formation even in sticky or heat‑sensitive materials, reducing the risk of built‑up edge and improving surface finish. The combination of chip control and a stable cutting edge increases effective tool life and lowers downtime for regrinding or index changes. As a round indexable insert, the geometry helps distribute cutting forces evenly, which supports vibration damping and consistent feed performance in interrupted milling operations. Geometry and tolerance that aid process security A compact round insert with size 16 and thickness code 05, produced to tolerance class M, offers robust seating and repeatable clamping accuracy. The round shape allows multiple cutting edges and versatile entry angles, making the design particularly suited to complex paths and cyclic cutting forces. These mechanical features translate into fewer stops for inspection and a smoother workflow on multi‑tool machining centres, supporting higher overall equipment effectiveness. Practical application guidance and process benefits This indexable insert is targeted at workshops and production facilities processing rostfreier Stahl and high‑temperature alloys (ISO groups M and S). For best results, pair the insert with toolholders recommended for interrupted cuts and moderate depths of cut; adjust speeds to account for the material’s heat conduction characteristics. The grade is optimised for secure chip formation and edge integrity, which helps achieve consistent surface quality and dimensional stability across serial production. If further technical parameters or cutting data are required, the technical team can provide tailored recommendations. For application advice or to source the ROMX1605M08-D57 WSM35G from Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for direct support and ordering guidance Technical data Article number: ROMX1605M08-D57-WSM35G-WALTER Product: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Designation: ROMX1605M08-D57 WSM35G Core data Size: 16 mm Thickness code: 05 Tolerance class: M Execution: X Special features Coating: Tiger‑tec Gold Material: coated carbide Shape: Round Chipbreaker: D57 Applicable material groups: rostfreier Stahl (M), Superalloys / Titanium (S) FAQ Which materials is this insert suitable for? The ROMX1605M08-D57 WSM35G is designed for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), where thermal resistance and stable chip formation are required. What is the benefit of the Tiger‑tec Gold coating on this insert? The Tiger‑tec Gold coating on the WSM35G grade improves heat resistance and wear performance, supporting longer edge life and consistent cutting behaviour in demanding milling tasks. How does the D57 chipbreaker influence performance? The D57 chipbreaker promotes controlled chip formation and reduces built‑up edge in difficult‑to‑machine materials, which enhances surface finish and extends the period between tool changes. Is the round geometry suitable for interrupted cuts? Yes, the round insert shape and the size 16 form provide robust seating and even force distribution, which is advantageous for interrupted milling and complex toolpaths. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and Walter Tools. The offered article is original, brand‑new goods from the manufacturer.
ROMX1605M08-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile P/M/S material capability and proven chip control for stable, productive milling results; order the ROMX1605M08-D57 WSP45G directly via Metav Werkzeuge or consult the technical team for application support. ROMX1605M08-D57 WSP45G – Milling indexable insert, Tiger·tec Gold (Walter Tools) The ROMX1605M08-D57 WSP45G is a round milling indexable insert engineered for versatile finishing and semi-finishing of Stahl, rostfreier Stahl and heat-resistant superalloys in demanding production environments Tiger·tec Gold PVD coating for longer tool life Suitable for Stahl, rostfreier Stahl and superalloys Round 16 mm geometry for flexible milling D57 chipbreaker for reliable chip control Stable chip control keeps machines running The combination of the D57 chipbreaker and the insert's round form delivers consistent chip control, reducing interruptions and minimising rework. For milling operations where chips, temperatures and edge wear interact, this geometry helps to form short, manageable chips and prevents tangling or jamming in many common setups. The immediate practical benefit is fewer stoppages and more predictable cycle times, which supports higher machine utilisation and smoother production scheduling. Extended edge life across a wide material range Built on the Tiger·tec Gold series and using a PVD-coated cemented carbide grade (WSP45G), the insert offers enhanced wear resistance and stable cutting edges in applications across P/M/S (Stahl, rostfreier Stahl, superalloys/titan). This balanced performance means longer intervals between index changes and fewer tool purchases over time, improving cost efficiency in batch and continuous production. The robust coating strategy also improves resistance to built-up edge and thermal softening during elevated cutting temperatures. Practical handling and process benefits in the workshop The round 16 mm form and the clear tolerance class M facilitate reliable seating in standard milling holders and repeatable positioning after indexing. The insert's design reduces set-up variability and simplifies inventory management: one versatile grade handles a range of workpiece materials, lowering the variety of inserts required at the tool crib. Combined with the specification clarity of the series, the result is improved process security and easier integration into existing cutting strategies. For tailored recommendations on using the ROMX1605M08-D57 WSP45G in specific applications or to source this Walter Tools insert via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order support Technical Data Article number: ROMX1605M08-D57-WSP45G-WALTER Label: Fräswendeschneidplatte ROMX1605M08-D57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Facts Insert size: 16 mm Thickness code: 05 Chipbreaker: D57 Grade/sort: WSP45G Tolerance class: M Special features PVD-coated cemented carbide Round insert geometry Suitable for P/M/S material groups Robust chip control for milling Execution code: X ISO designation: ROMX1605M08-D57 WSP45G FAQ What materials can be machined with this insert? The ROMX1605M08-D57 WSP45G is suited for Stahl, rostfreier Stahl and heat-resistant superalloys (P/M/S), offering versatile performance across these groups. Which series and coating does the insert use? The insert belongs to the Tiger·tec Gold series and features a PVD-coated cemented carbide grade (WSP45G) for improved wear resistance. How does the D57 chipbreaker benefit production? The D57 chipbreaker promotes predictable chip formation and short chips, reducing stoppages and supporting continuous operation in milling cycles. Is the insert compatible with standard holders? Yes; the round 16 mm form and tolerance class M ensure reliable seating and repeatable indexing in compatible milling toolholders. What thickness and size specification should be ordered? Order the specification matching the 16 size and thickness code 05, as listed in the product designation ROMX1605M08-D57 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX1605M08-F67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a stable cutting geometry and proven wear resistance for reliable machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our team for application advice. ROMX1605M08-F67 WSM35G — Round milling indexable insert with Tiger·tec Gold coating by Walter Tools The ROMX1605M08-F67 WSM35G is a round milling indexable insert designed for demanding roughing and trochoidal milling in stainless steel and heat‑resistant superalloys, offering a robust chipbreaker geometry for stable cutting. Tiger·tec Gold coated carbide grade WSM35G Round insert, Ø16 mm, 0.5 mm thickness F67 chipbreaker for stable chip control Tolerance class M for consistent mounting Increased process reliability through optimised coating and geometry The combination of the Tiger·tec Gold coating and the WSM35G substrate provides a balance of thermal resistance and edge stability that directly improves tool life when machining tough materials. The specialised F67 chipbreaker promotes consistent chip formation, which reduces the risk of built‑up edge and unexpected downtime. For production environments where cycle time and repeatability matter, this design translates into fewer change‑overs and a steadier output. The round form factor and the tight tolerance class M ensure repeatable seating in standard milling cutters, supporting predictable machining results and simplified tool management. Performance advantages for challenging materials Engineered for stainless steel and heat‑resistant superalloys, the grade emphasises heat resistance and wear control to maintain the cutting edge under heavy thermal load. The coated carbide construction allows higher cutting speeds than uncoated alternatives and supports aggressive feeds while keeping flank wear in check. As a result, the insert enables improved metal removal rates without sacrificing surface quality. For operations that process exotic alloys or stainless grades, this means shorter cycle times and fewer rework cycles, delivering measurable gains in productivity. Practical benefits for the workshop and purchasing decision The insert's straightforward round geometry and robust chipbreaker reduce set‑up complexity and make it suitable for both conventional and high‑feed milling strategies. Reduced vibration and reliable chip evacuation protect the machine spindle and downstream processes, lowering maintenance intervals and indirect costs. Given its Tiger·tec Gold technology and the grade characteristics, the component supports a wide workpiece spectrum—making it a versatile inventory item for job shops and production departments seeking cost‑effective, high‑performance tooling. Contact Metav Werkzeuge today to discuss suitability for specific stainless steel grades or to request batch availability for the ROMX1605M08-F67 WSM35G insert Technical data Article number: ROMX1605M08-F67-WSM35G-WALTER Label: Fräswendeschneidplatte ROMX1605M08-F67 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Key dimensions Shape: Round Diameter: 16 mm Thickness: 0.5 mm Chipbreaker: F67 Tolerance class: M Materials & features Grade/sort: WSM35G Coating technology: Tiger·tec Gold Material suitability: S / M (heat‑resistant superalloys and stainless steel) Execution: X FAQ What materials is this insert suitable for? The ROMX1605M08-F67 WSM35G insert is engineered for stainless steel and heat‑resistant superalloys (material groups M and S), leveraging its Tiger·tec Gold coating for thermal and wear resistance. How does the F67 chipbreaker affect machining? The F67 chipbreaker on this round insert controls chip formation and evacuation for stable cutting, reducing built‑up edge and improving process reliability when machining tough alloys. Can the insert be used in high‑feed milling strategies? Yes, the combination of the WSM35G grade and Tiger·tec Gold coating enables higher cutting parameters and supports aggressive feeds while maintaining acceptable tool life for many applications. Manufacturer: Walter AG; Tübingen, Germany; part of the Sandvik Group. The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for description only; there is no affiliation between our company and the mentioned manufacturers.
ROMX1605M08-F67 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade, stable cutting-edge performance and a chipbreaker designed for secure chip formation to achieve consistent results when machining stainless steels and heat-resistant alloys; order the ROMX1605M08-F67 WSM45X directly via Metav Werkzeuge or consult the team for application advice. ROMX1605M08-F67 WSM45X – Milling indexable insert, coated carbide, chipbreaker F67 by Walter Tools A high-performance ROMX1605M08-F67 WSM45X milling indexable insert engineered for long life and reliable cutting when machining stainless steels and heat-resistant superalloys in demanding production environments. Coated carbide grade WSM45X Optimised for stainless steels (ISO M) Round 16 mm insert form F67 chipbreaker for secure chip control Consistent milling in tough materials for repeatable production The coated WSM45X carbide grade is formulated for stability when cutting stainless steels and nickel-based alloys, so chip formation and edge wear are controlled under thermal and mechanical stress. This results in fewer interruptions for tool changes and a steadier process flow, which is especially valuable in batch production and when repeatability is required. The insert’s construction supports consistent dimensional results and reduces scrap rates by maintaining cutting performance over longer tool life. Improved chip control and protected cutting edge for safer machining Equipped with the F67 chipbreaker, the insert promotes manageable chip shapes and evacuation during milling, reducing the risk of re-cutting and tool damage. The round insert form and tailored geometry contribute to edge strength, which mitigates chipping when encountering tough grains or interrupted cuts. In practical terms, the combination of geometry and coating means safer, more predictable machining cycles with reduced need for process intervention. Practical compatibility and straightforward integration into tool programmes The round 16 format and tolerance class M make the insert compatible with a wide range of milling toolholders and face-milling applications; toolset-up is therefore uncomplicated. The grade’s suitability for both ISO groups M (stainless steels) and S (superalloys and titanium), where indicated, offers flexibility across mixed-material production runs. Technical teams will appreciate that the insert’s characteristics permit high cutting temperatures while preserving edge integrity, supporting stable cycle times and consistent surface quality. For application-specific recommendations on the ROMX1605M08-F67 WSM45X and to discuss optimised parameters for stainless steels or superalloys, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange expert consultation Technical data Article number: ROMX1605M08-F67-WSM45X-WALTER Designation: ROMX1605M08-F67 WSM45X Manufacturer: Walter Tools Product type: milling indexable insert Series: Walter Schneidstoffsorte - Serie offen Facts Insert form: Round Insert size: 16 Thickness: 05 Chipbreaker: F67 Grade: WSM45X Tolerance class: M Special features Coated cemented carbide (described as a coated hardmetal grade) Material applicability: S / M Suitable for stainless steels (ISO M) Suited for heat-resistant superalloys and titanium depending on geometry Round geometry for robust edge strength FAQ What materials is this insert designed for? The ROMX1605M08-F67 WSM45X insert is specified for stainless steels (ISO M) and, depending on cutter geometry, for heat‑resistant superalloys and titanium (ISO S). How does the F67 chipbreaker improve machining? The F67 chipbreaker on the ROMX1605M08-F67 promotes secure chip formation and evacuation, reducing re-cutting and enhancing edge protection during milling. Which insert form and size does this product use? This series uses a round insert form with size designation 16 and thickness code 05, enabling strong cutting edges and compatibility with common milling holders. Is this a coated or uncoated grade and what benefits does the coating provide? The WSM45X is a coated carbide grade; the coating improves heat resistance and cutting‑edge stability, extending tool life in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ROMX1605M08-F67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the high process reliability and versatile material capability of this insert: the combination of the Tiger·tec Gold technology and the WSP45G grade delivers stable cutting edges and consistent chip formation for productive milling. Order directly via Metav Werkzeuge or consult our technical team for application advice. ROMX1605M08-F67 WSP45G — Milling indexable insert, Tiger·tec Gold, Walter Tools A ROMX1605M08-F67 WSP45G milling insert designed for versatile face and peripheral milling of steels, rostfreier Stahl and heat‑resistant alloys, offering a round shape and chipformer F67 for controlled chip flow Tiger·tec Gold PVD-coated grade WSP45G Round insert form for flexible engagement Chipformer F67 for secure chip control Suitable for Stahl, rostfreier Stahl and Titan Faster, more consistent material removal with proven grade technology The Tiger·tec Gold coating combined with the WSP45G grade is optimised for productive milling of a wide material spectrum. Engineered as a PVD-coated carbide grade, it supports secure chip formation under the typical thermal loads associated with machining Stahl and rostfreier Stahl, reducing the incidence of built-up edge and enabling more consistent metal removal rates. For operations seeking a measurable uplift in throughput, the insert’s design promotes stable cutting action and predictable wear patterns, which in turn simplifies process planning and reduces unplanned interruptions. Controlled chip formation and edge stability for reliable finishes The integrated chipformer F67 is tailored to guide swarf away from the cut, decreasing the risk of surface damage and facilitating a consistent surface finish. The round insert geometry broadens allowable engagement parameters, allowing positive outcomes in both face and slot milling. This mechanical combination—coating, grade and chipformer—translates into a stable cutting edge that maintains performance over longer tool life, giving production teams greater confidence in repeatability and part quality. Versatility across demanding materials, explained for shopfloor planning The insert’s suitability is indicated by the material groups P / M / S: P for unalloyed and alloyed Stahl, M for rostfreier Stahl, and S for heat‑resistant superalloys and Titan. These designations mean the insert composition and coating address the thermal and mechanical challenges typical of these groups—heat generation, work hardening and difficult chip shapes—so the tool performs reliably across mixed production batches. For process engineers, this reduces the need for frequent tool changes and simplifies tooling inventories. Practical benefits for productivity and process security Beyond metallurgical compatibility, the geometry and grade selection reduce cycle‑time variability by mitigating sudden edge failure and enabling higher average cutting parameters where machine and fixture rigidity permit. The insert’s tolerance class M and execution X support interchangeability and consistent seating in compatible toolholders, which helps shorten set‑up times. In sum, the component is aimed at manufacturers prioritising throughput, repeatable surface quality and predictable tool life. For application-specific recommendations or to place an order through Metav Werkzeuge—reference the ROMX1605M08-F67 WSP45G insert and the Tiger·tec Gold series when contacting our team at Metav Werkzeuge for prompt technical support and delivery coordination Technical Data Article number: ROMX1605M08-F67-WSP45G-WALTER Description: Fräswendeschneidplatte ROMX1605M08-F67 WSP45G Brand: Walter Tools Grade: WSP45G Series: Tiger·tec Gold Facts Size: 16 Thickness: 05 Chipformer: F67 Tolerance class: M Special features Shape: Rund Material compatibility: P / M / S Execution: X Coating technology: Tiger·tec Gold Sortenbeschreibung: beschichtetes Hartmetall, zäh und vielseitig FAQ What materials can this insert machine effectively? The ROMX1605M08-F67 WSP45G is specified for machining groups P / M / S — covering Stahl, rostfreier Stahl and heat‑resistant alloys including Titan, making it suitable for mixed production runs. How does the chipformer F67 improve processing? The F67 chipformer promotes controlled chip formation and evacuation, which reduces swarf re‑cutting and helps preserve the cutting edge for more consistent surface finishes when using the ROMX1605M08-F67 WSP45G. Is the WSP45G grade coated and what is the benefit? Yes, WSP45G is a PVD-coated carbide grade within the Tiger·tec Gold family; the coating enhances wear resistance and thermal stability, extending effective tool life under typical milling conditions. Can the round insert geometry handle both face and peripheral milling? The round form offers flexible engagement angles and is well suited to both face and light peripheral milling applications; the ROMX1605M08-F67 designation indicates the specific form and chipformer combination. What does the tolerance class M mean for production? Tolerance class M denotes the insert’s dimensional accuracy and interchangeability, supporting consistent seating and repeatability in compatible toolholders, which simplifies setup and reduces variance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
ROMX1605M0T8-A27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WKK25G grade for abrasive cast-iron machining and the proven A27 chip control for steady production results; order the insert or consult Metav Werkzeuge for application advice. ROMX1605M0T8-A27 WKK25G milling insert (cast iron) — Walter Tools The ROMX1605M0T8-A27 WKK25G is a round milling insert optimised for productive machining of cast iron with Tiger·tec Gold coating. Round insert for stable engagement Tiger·tec Gold coating for wear resistance Optimised for cast iron machining A27 chipbreaker for reliable chip control Longer tool life through optimised grade and coating The combination of the WKK25G grade and Tiger·tec Gold coating provides a high resistance to abrasive wear commonly encountered in cast-iron applications. The substrate is coated carbide, engineered to maintain a stable cutting edge under intermittent and heavy engagement. As a result, interrupted machining cycles and the abrasive nature of many cast components lead to fewer tool changes and reduced process interruptions. This translates into measurable productivity gains and lower per-part tooling costs. Consistent chip control and machining stability Equipped with the A27 chipbreaker and a round insert form, the design ensures controlled chip formation and reliable evacuation in short, breaking chips typical of cast materials. The specification includes tolerance class M, which supports repeatable seating and dimensional stability in indexed cutters. Together these features reduce the risk of workpiece damage and rework while improving surface integrity on finished components. Practical integration in milling operations This insert suits milling systems that accept the ROMX format and benefits operations focused on cast-iron components, as confirmed by its material group: K (cast iron) designation. The geometry and chip control are aimed at productive component removal with stable cutting forces, simplifying cutter balance and tool-path planning. For machining operations that prioritise uptime and steady tool performance, the combination of grade, coating and chipbreaker offers clear process advantages. For reliable cast-iron milling performance with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 — the team will advise on the best cutter and indexable insert combination for each application. Technical data SKU: ROMX1605M0T8-A27-WKK25G-WALTER Designation: ROMX1605M0T8-A27 ISO designation: ROMX1605M0T8-A27 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKK25G Core specifications Shape: Round Size: 16 Thickness: 05 Chipbreaker: A27 Tolerance class: M Execution: X Materials & features Material group: K (cast iron) Coating technology: Tiger·tec Gold Substrate: coated carbide Application: machining of cast components Optimised for abrasive cast materials and short, breaking chips FAQ What materials is this insert designed for? The ROMX1605M0T8-A27 WKK25G is formulated for cast iron machining (material group K), with geometry and grade tuned to handle abrasive grey and nodular cast alloys. What are the main advantages of the Tiger·tec Gold grade? Tiger·tec Gold provides enhanced wear resistance and stable edge life, reducing tool changes and maintaining consistent cutting performance in abrasive cast-iron applications. Which chipbreaker does the insert use and what is the benefit? This insert features the A27 chipbreaker, which supports reliable chip control for short, breaking chips, improving evacuation and reducing the likelihood of built-up edge. Is the insert suitable for indexed milling systems requiring precise seating? Yes — the tolerance class M and round geometry provide repeatable seating and stable engagement, supporting dimensional consistency in indexable milling cutters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
ROMX1605M0T8-A27 WKP35G X Wendeplatten - Walter Tools
Benefit from high wear resistance, consistent cutting performance and broad material coverage—ideal for productive milling of steel and cast iron; order directly via Metav Werkzeuge or contact our advisors for application guidance. ROMX1605M0T8-A27 WKP35G milling indexable insert — Walter Tools (for steel and cast iron) The ROMX1605M0T8-A27 WKP35G is a round, coated milling indexable insert engineered for reliable high-volume machining of steel and cast iron in industrial milling applications Tiger·tec Gold coating for high wear resistance Optimised for steel and cast iron machining Round 16 mm format, 0.5 mm thickness Tolerance class M for stable machining results Longer tool life and predictable performance for production milling The Tiger·tec Gold series grade WKP35G combines a coated carbide substrate with a modern multilayer coating designed to reduce abrasive wear and maintain a sharp cutting edge. This results in longer tool life and consistent dimension control across runs, which reduces tool changes and machine downtime. For operations that demand repeatable results, the coated geometry and the round insert form support stable chip control and even wear distribution, translating directly into improved throughput and lower unit machining cost. Efficient cutting for steel and cast iron applications Designed for the ISO workpiece groups P and K, the insert is optimised for the thermomechanical and chip-forming characteristics of both steel and cast iron. The A27 chipbreaker geometry helps to break and evacuate chips reliably during interrupted or continuous milling, reducing recutting and the risk of built-up edge. The combination of substrate and coating provides a balance between toughness and hardness, enabling effective machining across a wide range of steel grades and typical cast iron compositions. Compact round format that simplifies tool inventory The round plate format with a nominal 16 mm size and a slim 0.5 mm thickness offers flexibility for indexable milling systems where space, repeatability and low vibration are priorities. The compact geometry allows multiple cutting edges per insert and simplifies logistics: the same insert can be rotated to present fresh cutting edges, improving process efficiency. The tolerance class M ensures consistent seat fit and repeatable positioning in compatible toolholders, which supports quick, reliable index changes on the production floor. Practical advantages for workshop integration Beyond material compatibility, the insert’s standardised ISO designation (ROMX1605M0T8-A27 WKP35G) makes it straightforward to match with existing toolholders and programming references. Because the grade is part of a widely used series, replacement and scale-up are uncomplicated, supporting lean inventory strategies. The product’s balance of wear resistance and edge stability is particularly relevant for mixed-production environments where operators require a single, dependable insert solution for both steel and cast iron tasks. Contact Metav Werkzeuge for tailored recommendations on tooling combinations, holder compatibility and batch supply—Metav Werkzeuge can advise on optimal cutter assemblies and order fulfilment. Technical Data Article number: ROMX1605M0T8-A27-WKP35G-WALTER SKU: ROMX1605M0T8-A27-WKP35G-WALTER Manufacturer: Walter Tools Product type: milling indexable insert Grade: WKP35G Series: Tiger·tec Gold ISO designation: ROMX1605M0T8-A27 WKP35G Material groups: P / K Shape: round Chipbreaker: A27 Tolerance class: M Core measurements Insert size: 16 mm Thickness: 0.5 mm Tolerance class: M Special features and suitability Coating: Tiger·tec Gold coating technology Substrate: coated cemented carbide (WKP35G) Suitable for: steel (P) and cast iron (K) according to ISO 513 Insert form: round, multi-edge indexing Application focus: productive milling, stable chip control FAQ What workpiece materials is this insert suitable for? The ROMX1605M0T8-A27 WKP35G insert is formulated for steel (ISO group P) and cast iron (ISO group K), offering balanced wear resistance and toughness for these materials. Which series and coating technology does the grade belong to? This insert is part of the Tiger·tec Gold series; the WKP35G grade uses a modern multilayer coating designed to improve abrasive wear performance and edge stability. How does the round format benefit milling operations? The round 16 mm format provides multiple usable edges per insert and even wear distribution; combined with the A27 chipbreaker it improves chip control and reduces downtime for tool changes. Is the insert compatible with standard toolholders? The ISO designation ROMX1605M0T8-A27 WKP35G corresponds to common indexable insert families and, with tolerance class M, is suitable for holders designed for this form factor. Can this insert be used for interrupted cuts? Yes — the coated carbide substrate and the round geometry are forgiving under interrupted cutting conditions, and the chipbreaker supports stable fragmentation and evacuation. Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
ROMX1605M0T8-A27 WKP35S WCP35S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP35S grade for stable chip control and high process security when machining steel and cast iron; order the ROMX1605M0T8-A27 WKP35S directly via Metav Werkzeuge or consult the specialists for application-specific guidance. ROMX1605M0T8-A27 WKP35S — Milling indexable insert by Walter Tools with Tiger‑tec Silver coating for steel & cast iron The ROMX1605M0T8-A27 WKP35S is a round milling insert engineered for robust face and shoulder milling tasks, combining a coated carbide grade with an A27 chipbreaker to handle the thermal and abrasive demands of steel and cast iron machining. Tiger‑tec Silver coating for extended tool life WKP35S grade optimised for steel and cast iron Round 16 plate for versatile face milling A27 chipbreaker for reliable chip control Maximise machining reliability with a coated, application‑focused grade The insert’s WKP35S grade, developed within the Tiger‑tec Silver family, is a coated carbide solution tailored for the heat generation and chip behaviour typical of steel and the abrasive nature of cast iron. This combination yields improved process reliability and longer edge life compared with uncoated grades, allowing machine shops to maintain consistent cycle times and reduce unplanned tool changes. The design supports predictable wear patterns, which simplifies tool-life planning and improves overall throughput on mixed-production runs. Consistent chip control and surface quality for demanding operations Equipped with an A27 chipbreaker, this round insert promotes controlled chip formation under a range of cutting conditions, reducing the risk of built-up edge and providing a more stable cutting action. The controlled chips minimise rework and help secure a more consistent surface finish on machined components. Where component tolerance and surface integrity are critical, the insert’s geometry supports safer feeds and depths of cut while maintaining dimensional stability throughout the tool life. Versatility through form and material suitability The insert’s round form and 16 designation make it well suited to a variety of milling tasks, from face milling to light profiling. The material designation P / K indicates suitability for both steel (P) and cast iron (K) applications, enabling fewer tool changes on mixed-material production schedules. For operations that switch between unalloyed and alloyed steels or different cast iron grades, this insert provides a practical balance of adaptability and performance, reducing complexity in tool inventories. Practical benefits for production planning and shopfloor efficiency With a tolerance class M and the execution type X, the product supports predictable mounting and repeatability in multi-index toolholders, contributing to quick index changes and stable set-ups. The combination of a coated carbide grade and the A27 chipbreaker delivers measurable gains in uptime and process repeatability, supporting leaner inventories and fewer emergency stops. For engineers seeking to improve cycle consistency or to extend intervals between tool interventions, this insert represents a pragmatic choice backed by Walter Tools’ machining expertise. For application advice on the ROMX1605M0T8-A27 WKP35S or to confirm suitability for a specific component and machining strategy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical data Article number / SKU: ROMX1605M0T8-A27-WKP35S-WALTER Product type: Milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Plate designation: ROMX1605M0T8-A27 Execution: X Core data Plate size: 16 Thickness: 05 Tolerance class: M Special features Coating technology: Tiger‑tec Silver Material application: P / K (steel and cast iron) Chipbreaker: A27 Plate form: Round Coated carbide grade FAQ What materials is this insert intended for? The ROMX1605M0T8-A27 WKP35S is designed for steel and cast iron applications, corresponding to the P and K ISO groups, and is supplied in a coated carbide grade optimised for these materials. Which machining processes benefit most from this insert? Face milling and shoulder milling applications profit from the round insert geometry and the A27 chipbreaker, delivering reliable chip control and consistent surface quality in production work. How does the Tiger‑tec Silver technology influence performance? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, which in turn increases process security and extends tool life under typical milling conditions for steel and cast iron. Is the insert compatible with multi‑index holders and repeatable set‑ups? Yes—the insert’s execution and tolerance class are suited to standard indexable toolholders, facilitating quick indexing and repeatable seating for stable production. What chip control advantages does the A27 breaker provide? The A27 chipbreaker promotes short, controllable chips in both steel and cast iron, reducing the risk of entanglement and improving machining consistency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original, brand‑new goods from the manufacturer.
ROMX2006M08-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, secure chip control and robust cutting-edge stability to keep machining cycles consistent when working with cast iron; request cutting data and availability via Metav Werkzeuge for a smooth supply chain and prompt technical advice. ROMX2006M08-D57 WKK25G milling indexable insert — Tiger·tec Gold coating for cast iron, Walter Tools The ROMX2006M08-D57 WKK25G is a round milling insert designed for efficient machining of cast iron, offering a coated carbide grade and a D57 chipbreaker for controlled chip formation in interrupted and continuous cuts. Tiger·tec Gold coating for enhanced wear resistance Optimised for cast iron machining (ISO K) Round insert with D57 chipbreaker Stable cutting edge, universal performance Consistent productivity for cast iron operations The combination of the WKK25G grade and the Tiger·tec Gold coating provides high resistance to abrasive wear typical of cast iron machining. This means fewer tool changes and more predictable cycle times; shops benefit from improved process stability and a reduced cost per component through extended edge life. The coated carbide composition is adapted to the short, often brittle chips of cast irons, so the insert sustains cutting forces while preserving surface quality on the workpiece. Secure chip control and reduced rework The D57 chipbreaker geometry on this round insert directs broken chips reliably away from the cutting zone, lowering the risk of chip entanglement and machine downtime. Controlled chip behaviour improves heat dissipation at the cutting edge and supports consistent surface finish, which is especially valuable in series production where repeatability and minimal rework are priorities. The geometry also helps maintain stable cutting forces during interrupted cuts. Easy integration and simplified tool management The ROMX2006M08-D57 form factor fits common toolholder systems for round inserts, enabling straightforward inventory handling and rapid tool changes. Standardised geometry and a universal performance profile reduce the number of grades and shapes required on the shop floor, supporting efficient stock management and quicker set-ups without sacrificing machining capability. Reliability and process safety under demanding conditions The coated grade emphasises a robust cutting edge and reliable wear behaviour, increasing confidence in longer tool life under the abrasive conditions of cast iron. Stable edge life leads to more consistent part tolerances and predictable maintenance intervals, which improves overall plant throughput. For operations seeking robust, repeatable results in cast iron, this insert offers measurable gains in process safety and quality assurance. Contact Metav Werkzeuge today for availability, specific cutting data and application advice for the Walter Tools ROMX2006M08-D57 WKK25G milling indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support Technical data Article number: ROMX2006M08-D57-WKK25G-WALTER Article name: Fräswendeschneidplatte ROMX2006M08-D57 WKK25G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Designation: ROMX2006M08-D57 ISO designation: ROMX2006M08-D57 WKK25G Facts Insert size: 20 Plate thickness: 06 Tolerance class: M Shape: Round Chipbreaker: D57 Special features Coating: Tiger·tec Gold Grade: WKK25G Material group suitability: K (cast iron) Series: Tiger-tec Gold Execution: X FAQ What materials is this insert intended for? The ROMX2006M08-D57 WKK25G insert from Walter Tools is optimised for cast iron (ISO group K) and is designed to handle the abrasive wear and chip characteristics typical of these materials. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip breaking and evacuation, which improves heat management and reduces the chance of chip-related interruptions when using the ROMX2006M08-D57 WKK25G in cast iron operations. Is this insert suitable for interrupted cuts? Yes; the round geometry and stable cutting edge of the ROMX2006M08-D57 with the WKK25G grade provide the robustness required for many interrupted and mixed cutting conditions encountered in milling cast iron. What benefits does Tiger·tec Gold coating bring? The Tiger·tec Gold coating enhances wear resistance and cutting-edge stability, extending tool life and supporting consistent surface finishes when the ROMX2006M08-D57 WKK25G is used in abrasive cast iron applications. Can this insert reduce tool inventory complexity? The universal performance profile and the round insert format help standardise tooling requirements, so the ROMX2006M08-D57 WKK25G can contribute to a leaner, more manageable tool stock. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
ROMX2006M08-D57 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WKP35G grade delivers extended tool life and consistent cutting performance for demanding milling operations; the round geometry with D57 chipbreaker ensures reliable chip control when machining steel and cast iron. Order directly via Metav Werkzeuge or request application advice from our consultants. ROMX2006M08-D57 WKP35G — Indexable milling insert (round, D57 chipbreaker) by Walter Tools ROMX2006M08-D57 WKP35G is a round indexable milling insert designed for robust milling of steel and cast iron in general industrial applications Tiger·tec Gold coating for extended tool life Optimised for steel and cast iron (P / K) Round 20 mm insert with D57 chipbreaker Greater productivity through Tiger·tec Gold surface technology The Tiger·tec Gold coating combined with the WKP35G grade provides significant wear resistance and a stable cutting edge, which reduces downtime due to tool changes and improves process reliability. This surface technology is engineered to withstand the thermal and abrasive loads typical when machining steel and cast iron, so operators can expect more consistent cycle times and fewer rework operations. The result is measurable efficiency: less time spent replacing inserts and more uninterrupted production. Reliable chip control and secure edge geometry for milling A round insert with an integrated chipbreaker D57 gives dependable chip formation and evacuation in a range of milling strategies. The circular form offers a durable cutting edge that tolerates entry angles and intermittent cutting forces, improving resistance to chipping during heavy engagement. The D57 chipbreaker is designed for the characteristic chips of P and K ISO groups, supporting smoother chip flow and safer swarf management—key for stable surface finish and predictable tool life in series production. Clear selection and application guidance for workshop planning The ISO designation ROMX2006M08-D57 WKP35G indicates the geometry and the grade; the insert is available in a 20 mm diameter and 06 thickness with tolerance class M, making it suitable for common toolholders that accept round milling inserts. The material code P / K confirms suitability for steel (P) and cast iron (K). Choosing this insert simplifies tooling decisions where a balance of durability and broad material capability is required, especially for mixed-production runs that process both unalloyed/legged steels and various cast irons. For specific cutting-data sheets, toolholder compatibility checks or tailored recommendations from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange application support and ordering Technical Data SKU: ROMX2006M08-D57-WKP35G-WALTER ISO designation: ROMX2006M08-D57 WKP35G Product type: Fräswendeschneidplatte (indexable milling insert) Series: Tiger·tec Gold Grade: WKP35G Manufacturer: Walter Tools Core data Diameter: 20 mm Thickness: 06 Chipbreaker: D57 Form: Round Tolerance class: M Special features Material suitability: steel (P) and cast iron (K) Coating: Tiger·tec Gold Material code: P / K Execution: X Base designation: ROMX2006M08-D57 FAQ What materials is this insert suitable for? The ROMX2006M08-D57 WKP35G insert by Walter Tools is specified for ISO groups P (steel) and K (cast iron), making it suitable for unalloyed and alloyed steels as well as a range of cast iron grades. What does the WKP35G grade mean? WKP35G is Walter Tools’ coated carbide grade within the Tiger·tec Gold family; it emphasises wear resistance and stable cutting performance under the thermal and abrasive conditions typical of steel and cast-iron machining. How does the D57 chipbreaker affect machining? The D57 chipbreaker is tailored for effective chip control when machining P and K materials, promoting short, manageable chips and helping to maintain surface quality and machine uptime during continuous milling. What are the key dimensions and tolerances? Key data: diameter 20 mm, thickness 06, form round, and tolerance class M; these values correspond to the ROMX2006M08-D57 designation for proper toolholder matching. Can the insert be used for finishing and roughing operations? The combination of round geometry and the WKP35G grade with Tiger·tec Gold coating makes this insert versatile for both robust roughing and many semi-finish tasks, where a balance between edge life and surface integrity is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered marks are mentioned solely for explanation; there is no association between our company and the mentioned brands. The offered article is an original, factory-new product from the manufacturer.
ROMX2006M08-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust D57 chipbreaker and a round form for consistent steel machining performance; order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. ROMX2006M08-D57 WPP35G milling insert — Walter Tools, Tiger·tec Gold, for steel A ROMX2006M08-D57 WPP35G milling insert designed for productive steel machining, offering a coated‑carbide grade optimised for stable chip formation and extended tool life. Tiger·tec Gold coating for extended tool life D57 chipbreaker optimised for steel machining Round insert, size 20 and thickness 06 Grade WPP35G: coated carbide, robust edge Consistent productivity and lower process costs The coated‑carbide grade WPP35G from the Tiger·tec Gold series provides consistent wear behaviour when machining steels, which translates directly into fewer tool changes and less downtime. The combination of a wear‑resistant coating and a tough substrate means the insert balances edge stability with resistance to thermal and mechanical loads. For production environments this reduces the number of inserts required per shift, improving the cost‑per‑part ratio and supporting predictable machining cycles. Design choices that improve chip control and surface quality The D57 chipbreaker is developed for the typical chip formation of steel, promoting controlled chip curl and evacuation even in mixed operations. The insert’s round geometry gives a positive engagement and promotes stable cutting conditions on interrupted or rough surfaces. In practical terms, this leads to improved surface finish and reduced vibration, allowing higher feed rates and more reliable toolpaths in both roughing and semi‑finishing operations. Simple handling, wide application range and machining advice The ROMX geometry combines easy seatability with a robust cutting edge, making the insert suitable for a broad range of steel grades classified under group P. When selecting cutting data, favour moderate chip thickness and progressive feed to exploit the tough substrate while letting the coating manage abrasive wear. For users seeking quick process validation, Metav Werkzeuge provides material‑specific recommendations to match the insert’s capabilities with machine rigidity and workpiece conditions. For reliable steel machining choose the Walter Tools Tiger·tec Gold grade ROMX2006M08‑D57 WPP35G and contact Metav Werkzeuge for tailored cutting data and supply: eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: ROMX2006M08-D57-WPP35G-WALTER Type designation: ROMX2006M08-D57 WPP35G Series: Tiger‑tec Gold Grade: WPP35G Form: Round Facts Size: 20 Thickness: 06 Chipbreaker: D57 Tolerance class: M Execution: X Special features Coating: Tiger·tec Gold (coated carbide) Material group suitability: P (steel) Manufacturer brand: Walter Tools Range: Robust edge and optimised chip former FAQ What materials is this insert suitable for? The ROMX2006M08‑D57 WPP35G is specified for steel (material group P); the WPP35G grade is designed to handle the heat and chip characteristics encountered when machining unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP35G grade provides improved wear resistance and thermal stability, which helps maintain cutting edge integrity and reduces the frequency of tool changes in continuous production. Is the D57 chipbreaker suitable for finishing operations? The D57 chipbreaker promotes controlled chip formation for both roughing and semi‑finishing in steels, supporting improved surface quality when combined with appropriate feeds and speeds using the ROMX geometry. Can the insert withstand interrupted cuts? The round form and robust edge of the ROMX2006M08‑D57 WPP35G offer good resistance to impact and make the insert well suited to interrupted cuts common in milling operations on steel components. Where can cutting data and application guidance be obtained? Application guidance for the ROMX2006M08‑D57 WPP35G and material‑specific cutting data are available from Metav Werkzeuge; the manufacturer’s grade characteristics also assist in selecting feeds and speeds. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of the Walter AG group and is widely recognised for precision tools in metalworking. Protected trademarks and brand names belong to their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the brand owner. The item offered is an original, factory‑new product of the manufacturer.
ROMX2006M08-D57 WSM35G X Wendeplatten - Walter Tools
Take advantage of the combination of high edge stability, broad material coverage and proven Tiger·tec Gold coating for consistently productive milling of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or request application advice from our consultants. ROMX2006M08-D57 WSM35G — Round milling insert with Tiger·tec Gold, Walter Tools A ROMX2006M08-D57 WSM35G round milling insert engineered for demanding milling of stainless steel and heat‑resistant superalloys in industrial machining. Tiger·tec Gold coating for improved edge life Optimised for stainless steel and superalloys Round plate geometry for stable cutting edges Chipbreaker D57 for controlled chip formation Consistent cutting performance for high‑demand materials The WSM35G grade, part of the Tiger·tec Gold series, is a coated carbide solution developed to deliver edge stability under heavy thermal and mechanical loads. The round plate geometry increases the available cutting edge length and supports repeatable performance in interrupted and continuous milling operations. This combination of material science and geometry means fewer tool changes and improved machine uptime, supporting higher productivity in series production. Reliable machining of stainless steel and heat‑resistant alloys Designed for ISO groups M and S, the insert excels when machining stainless steel and heat‑resistant superalloys or titanium. These workpiece groups are prone to built‑up edge and heat concentration; the WSM35G grade balances toughness and thermal resistance to promote secure chip formation and a stable cutting edge. The specified chipbreaker D57 supports predictable chip control, which reduces rework and contributes to consistent surface quality in demanding applications. Practical advantages during setup and production The round insert form and the plate thickness 06 provide mechanical robustness and allow for flexible entry angles in milling tools. The ROMX2006M08‑style geometry is commonly used where a reliable, multi‑edge solution is required, enabling economical indexation and longer tool life per index. Integration into existing milling systems is straightforward; for specific clamping or cutter compatibility, Metav Werkzeuge offers application guidance and technical information to match the insert to the intended cutter body. For machining stainless steel and superalloys with Walter Tools' proven Tiger·tec Gold technology, contact Metav Werkzeuge for purchase and tailored application recommendations. Technical data SKU: ROMX2006M08-D57-WSM35G-WALTER Article: ROMX2006M08-D57 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Dimensions & core data Plate size: 20 Thickness: 06 Chipbreaker: D57 Form: Round Grade: WSM35G Execution: X Tolerance class: M Special features Coating technology: Tiger·tec Gold Material suitability: S / M Targeted applications: stainless steel; heat‑resistant superalloys and titanium Intended use: milling insert, indexable cutting tool FAQ What materials is this insert best suited for? The ROMX2006M08‑D57 WSM35G insert is developed for ISO groups M and S, making it suitable for stainless steel and heat‑resistant superalloys as described by Walter Tools. How does the Tiger·tec Gold technology benefit production? Tiger·tec Gold coating on the WSM35G grade enhances thermal and mechanical resistance, improving edge life and supporting stable chip formation during continuous machining. What advantage does the round plate form offer? Round geometry increases edge strength and provides multiple equivalent cutting edges, supporting interrupted cuts and offering economical indexing during prolonged production runs. Is the chipbreaker D57 suitable for heavy cutting? Chipbreaker D57 is designed to produce controlled chips under the cutting conditions typical for stainless steel and superalloys, aiding consistent surface finish and machine cycle reliability. Can the insert be used in standard milling cutter bodies? The ROMX2006M08 format corresponds to common indexable milling systems; compatibility depends on the cutter body interface — Metav Werkzeuge can advise on matching cutter holders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for clarification. There is no connection between our company and the named brands. The offered article is original, brand‑new merchandise from Walter Tools.
ROMX2006M08-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating and the WSP45G grade for long tool life and consistent chip control; the round form and robust chipbreaker enable secure milling across steels, stainless steels and superalloys. Order directly via Metav Werkzeuge or consult our technical team for application support. ROMX2006M08-D57 WSP45G — Round milling indexable insert, Tiger·tec Gold PVD, Walter Tools The ROMX2006M08-D57 WSP45G is a round milling insert designed for versatile face and profile milling of steels, stainless steels and heat‑resistant alloys in industrial machining environments. Tiger·tec Gold PVD coating Round insert form for smooth feed Suitable for steel, stainless and superalloys Stable cutting edge and controlled chip flow Higher productivity through stable edge life The ROMX2006M08-D57 WSP45G combines a coated carbide substrate with Tiger·tec Gold PVD technology to extend edge life under cyclic thermal and mechanical loads. The result is fewer indexings and longer tool cycles, which translates into measurable productivity gains on milling centres and line operations. This grade is engineered for consistent wear patterns, which simplifies process windows and reduces the frequency of quality deviations during series production. Versatile material coverage and secure chip control Designed for the machining groups P / M / S, the insert supports efficient cutting of unalloyed and alloyed steel, stainless steels and high‑temperature superalloys. The integrated D57 chipbreaker promotes reliable chip formation and evacuation, improving surface finish and reducing the risk of built‑up edge on demanding materials. With its round geometry, the insert allows stable engagement at variable depths of cut, providing process security where material properties vary or where interrupted cuts occur. Simple handling and seamless process integration The round form and standard ISO designation enable easy replacement and predictable cutting behaviour in existing toolholders. Tolerance class M and execution X provide consistent seating and repeatability, helping to maintain concentricity and balance in high‑speed operations. The combination of a proven chipbreaker design and a versatile grade reduces the need for multiple tool types, supporting lean tooling strategies and fast changeovers on the shop floor. For tailored advice or to secure supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for application support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ROMX2006M08-D57-WSP45G-WALTER Article: Fräswendeschneidplatte ROMX2006M08-D57 WSP45G Brand: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Execution: X Facts Insert size: 20 Thickness: 06 Chipbreaker: D57 Tolerance class: M Form: Round Special features Material compatibility: P / M / S Coating technology: Tiger·tec Gold PVD Insert designation: ROMX2006M08-D57 ISO designation: ROMX2006M08-D57 WSP45G UID: ROMX2006M08-D57-WSP45G-WALTER FAQ What materials can be machined with this insert? The ROMX2006M08-D57 WSP45G is suitable for machining steel, stainless steels and heat‑resistant superalloys, as indicated by its P / M / S compatibility. Which coating and grade does this insert use? This insert uses the Tiger·tec Gold coating and the WSP45G grade, providing enhanced wear resistance and process stability for milling applications. Is the chip control suitable for interrupted cuts? Yes. The D57 chipbreaker and the round geometry deliver stable chip formation and evacuation, which helps during interrupted cuts and variable engagement conditions. How does the round form affect tool life and feed strategy? The round insert form enables smooth feed progression and distributed cutting forces, which often results in improved tool life and the possibility to apply more aggressive feed rates with maintained surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer Walter Tools.
ROMX2006M0T8-A27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of a dedicated grade and coating for abrasive materials: the combination of Tiger·tec Gold technology and the WKK25G grade ensures extended tool life and consistent chip behaviour when machining cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for process integration and availability. ROMX2006M0T8-A27 WKK25G milling indexable insert — Tiger·tec Gold grade for cast iron, Walter Tools ROMX2006M0T8-A27 WKK25G is a round milling insert engineered for robust cast iron machining, offering a coated carbide grade and an A27 chipbreaker for reliable chip control in interrupted or abrasive cuts Tiger·tec Gold coating for high wear resistance Optimised for abrasive cast iron machining Round insert Ø20 with A27 chipbreaker Grade WKK25G for stable chip control Longer tool life through tailored coating and grade The Tiger·tec Gold coating paired with the WKK25G carbide composition is designed specifically for abrasive materials, delivering improved wear resistance and predictable tool performance. This combination reduces the frequency of index changes and contributes to a steadier process, which helps maintain consistent component quality in repetitive production. The engineered coating technology mitigates the impact of short, breaking chips typical for this material group, so the milling tool keeps a stable cutting edge and requires fewer unplanned interruptions. Predictable chips and fewer process interruptions The insert’s A27 chipbreaker and its round insert geometry produce controlled chip formation and evacuation when working with cast iron. Predictable chip behaviour reduces the chance of workpiece damage and cutter jamming, which in turn lowers downtime and improves overall throughput. These geometric choices support efficient removal of brittle, fragmented chips and make the component suitable for both conventional and more demanding milling operations where reliable chip control is essential. Seamless integration into machining workflows Built by Walter Tools, this indexable solution supports quick insert changes and straightforward tool management, helping to keep machine uptime high. The combination of the Ø20 format and the stable grade allows for flexible use in a range of milling cutters where round inserts are required. Process planners benefit from the reproducible results: stable cutting conditions mean fewer adjustments, consistent surface quality and a predictable maintenance rhythm for production tooling. Material suitability and application notes Assigned to the material group K, the insert is optimised for cast iron applications and for situations dominated by abrasive wear and short, breaking chips. The grade selection focuses on productive machining of grey and nodular cast irons, offering a balance between resistance to abrasive attack and toughness. For process tuning, select appropriate feeds and speeds for cast iron families and consider coolant and chip evacuation strategies to complement the insert’s chip-breaking characteristics. For tailored machining recommendations or to arrange supply of Walter Tools ROMX2006M0T8-A27 WKK25G, contact Metav Werkzeuge for technical advice and rapid delivery coordination. Technical Data Article number / SKU: ROMX2006M0T8-A27-WKK25G-WALTER Label: Fräswendeschneidplatte ROMX2006M0T8-A27 WKK25G Walter Tools Manufacturer: Walter Tools Type: Fräswendeschneidplatte (milling indexable insert) Grade: WKK25G Series: Tiger-tec Gold Facts Size designation: 20 Thickness designation: 06 Chipbreaker: A27 Shape: Round Tolerance class: M Special features Coating: Tiger·tec Gold Material group suitability: K (cast iron) Execution: X Plate designation without grade: ROMX2006M0T8-A27 ISO designation: ROMX2006M0T8-A27 WKK25G FAQ Which materials are recommended for this insert? The ROMX2006M0T8-A27 WKK25G from Walter Tools is recommended for machining cast iron (material group K) and is tuned to handle abrasive wear and short, breaking chips typical of those materials. What is the main benefit of the Tiger·tec Gold coating? The Tiger·tec Gold coating on this grade improves wear resistance and helps maintain a stable cutting edge during prolonged machining of abrasive cast iron, supporting longer tool life and consistent results. How does the A27 chipbreaker affect machining? The A27 chipbreaker promotes predictable chip formation and evacuation for cast iron, reducing the risk of chip-related interruptions and contributing to a steadier production flow when using this insert. Can this round insert be used in interrupted cuts? Yes, the design and grade of the insert make it suitable for operations that involve interrupted cuts in cast iron, offering stable performance and controlled chip behaviour. Is the ROMX2006M0T8-A27 WKK25G compatible with standard cutters accepting Ø20 round inserts? The insert’s Ø20 designation and round format are intended for use in cutters that accept this geometry; confirm cutter compatibility and clamping requirements before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the respective manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com