ROMX2006M0T8-A27 WKP25S Wendeplatten - Walter Tools
Combining Tiger‑tec Silver coating, the WKP25S grade and a round 20 mm form, this insert delivers reliable chip control and extended tool life for steel and cast iron machining; order the ROMX2006M0T8-A27 WKP25S via Metav Werkzeuge or consult our specialists for application support ROMX2006M0T8-A27 WKP25S – Tiger‑tec Silver milling indexable insert (round, 20 mm) | Walter Tools The ROMX2006M0T8-A27 WKP25S is a round milling indexable insert engineered for productive machining of steel and cast iron in medium to heavy cutting operations Tiger‑tec Silver coated carbide grade WKP25S Optimised for steel and cast iron machining Round 20 mm insert with A27 chipbreaker Reliable performance for steel and cast iron production The WKP25S grade, produced in the Tiger‑tec Silver series, combines a coated carbide substrate with an optimised top layer to reduce abrasive wear and maintain a stable cutting edge. This configuration favours consistent batch production where repeatability matters, translating into longer tool life and fewer interruptions for insert changes. For manufacturers processing ISO group P and K materials, the result is measurable uptime and predictable component quality. The round geometry supports versatile milling strategies while the grade chemistry helps cope with the typical heat and chip formation behaviour of steel and cast iron. Clear chip control and simpler machining setups The A27 chipbreaker is designed to manage medium to long chips typical of general milling tasks, improving evacuation and reducing the risk of recutting. In practice, this means more stable cutting forces and fewer surface imperfections on the workpiece. The insert’s round form and the tolerance class M ensure interchangeability in compatible holders, supporting quick index changes and straightforward tool management. For operators with limited experience of advanced coatings, coated carbide denotes a wear-resistant layer bonded to a hard base material—this provides both edge protection and thermal resistance during interrupted cuts. Productivity, process security and workshop integration Adopting this round insert supports a rational approach to process optimisation: fewer tool changes, predictable wear progression and easier inventory control for the common 20 mm size. The insert’s execution X and manufacturing standards align with industrial expectations for mechanical stability, enabling predictable cycle times. Walter Tools’ established reputation for precision tooling contributes to process confidence, and the grade WKP25S is suitable where a balance of productivity and surface quality is required. For technical queries or cutting-data recommendations, Metav Werkzeuge provides application guidance and can assist in selecting toolholders and cutting parameters for specific machines and materials (email: info@metav-werkzeuge.com, phone: +49 2822 7131930). Discuss application requirements and availability with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 to determine if the ROMX2006M0T8-A27 WKP25S by Walter Tools is the right choice for a specific machining task Technical data SKU: ROMX2006M0T8-A27-WKP25S-WALTER Article designation: ROMX2006M0T8-A27 WKP25S Product type: Milling indexable insert (round) Brand: Walter Tools Facts Insert diameter: 20 mm Thickness code: 06 Chipbreaker: A27 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Material suitability: Steel (P) and cast iron (K) Shape: Round Execution: X FAQ What materials is this insert suitable for? The ROMX2006M0T8-A27 WKP25S is specified for ISO groups P and K, meaning it is suitable for machining unalloyed and alloyed steel as well as cast iron. What does the Tiger‑tec Silver designation provide? Tiger‑tec Silver refers to the coating technology applied to the WKP25S grade; it improves wear resistance and thermal stability compared with uncoated grades, yielding longer life in demanding steel and cast iron operations. How does the A27 chipbreaker affect machining? The A27 chipbreaker controls chip shape and evacuation for medium to long chips, which helps maintain surface finish and reduces the likelihood of chip-related interruptions during milling. Why is a round insert useful in milling applications? A round insert offers multi-directional cutting edges and robustness in interrupted cuts; the 20 mm round form is commonly used where flexibility and mechanical stability are required. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of Walter Tools.
ROMX2006M0T8-A27 WKP35G WKP35G Wendeplatten - Walter Tools
Combines extended tool life and controlled chip formation for stable milling results. Suited to steel and cast iron work, this insert offers a cost-effective balance of Tiger·tec Gold durability and precise chip control; order directly via Metav Werkzeuge or consult the technical team for application support. ROMX2006M0T8-A27 WKP35G milling indexable insert by Walter Tools — Tiger·tec Gold, A27 chipbreaker ROMX2006M0T8-A27 WKP35G is a round milling insert designed for versatile milling of steel and cast iron, offering coated-carbide wear resistance and a dedicated chipbreaker for predictable machining. Tiger·tec Gold coating for long tool life Optimised for steel and cast iron machining Round 20 mm insert for flexible milling WKP35G coated carbide grade for wear resistance A27 chipbreaker for controlled chip formation Longer production runs with reduced wear The Tiger·tec Gold coating combined with the WKP35G grade delivers a high wear resistance suited to repetitive milling cycles. As a coated carbide insert, the grade balances toughness and hardness to withstand common abrasive and thermal stresses when machining steel and cast iron. For production environments where tool-change frequency affects uptime, the improved life of this cutting grade reduces interruptions and supports more consistent output. Predictable chips and improved surface quality The A27 chipbreaker geometry enables controlled chip formation and evacuation, which lowers the risk of re-cutting and contributes to a steadier cutting force. This stability typically translates into improved surface quality and reduced vibration during finishing passes. In practice, the chip control aids process predictability, which supports higher feed rates while maintaining acceptable component finish and dimensional consistency. Compact round geometry for machining flexibility The round 20 mm format provides a versatile cutting edge for applications requiring multiple approach angles and interpolated milling. The geometry supports smooth engagement and a balanced cutting action, making the insert appropriate for both slotting and light shoulder milling when combined with suitable holders. The thickness designation 06 and tolerance class M ensure interchangeability and mechanical stability in common toolholders, helping to maintain repeatable results across tool changes. Application guidance and material compatibility Conforming to ISO group indications, the material designation P / K signifies suitability for machining a range of unalloyed and alloyed steel types (P) as well as cast iron (K). The ROMX2006M0T8-A27 WKP35G insert is therefore recommended for mixed-production workshops and jobbing operations that require one cutting grade to cover multiple workpiece materials. Selection of cutting data should follow standard recommendations for coated-carbide inserts, with consideration for material condition, coolant use and machine rigidity. Contact Metav Werkzeuge to discuss matching the ROMX2006M0T8-A27 WKP35G to specific production requirements or to request cutting-parameter recommendations — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data SKU: ROMX2006M0T8-A27-WKP35G-WALTER Designation: ROMX2006M0T8-A27 WKP35G Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Shape: round Size: 20 Thickness designation: 06 Chipbreaker: A27 Tolerance class: M Special features Grade: WKP35G Material groups: P / K (ISO 513) Execution: X Coated carbide cutting material Suited for steel and cast iron machining FAQ What materials is this insert suitable for? The ROMX2006M0T8-A27 WKP35G insert is formulated for ISO groups P and K, meaning it is suitable for machining various steels and cast iron. What benefit does the Tiger·tec Gold series provide? Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, extending tool life in continuous milling operations. How does the A27 chipbreaker influence machining? The A27 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions. Is the round form advantageous for specific milling tasks? Yes; the round geometry provides multiple effective cutting edges and flexibility for varied milling approaches, beneficial in mixed-operation shops. What tolerance and mounting standards apply to this insert? The insert is manufactured to tolerance class M, ensuring interchangeability and consistent seating in compatible toolholders. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. The Walter AG (brand Walter Tools) is a globally recognised provider of precision tools within the Sandvik group.
ROMX2006M0T8-A27 WKP35S X Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating and the WKP35S grade for reliable wear resistance and consistent edge life; the round 20 form with A27 chipbreaker ensures controlled chip formation and tool stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. ROMX2006M0T8-A27 WKP35S – milling indexable insert for steel and cast iron, Tiger‑tec Silver (Walter Tools) A ROMX2006M0T8-A27 WKP35S round milling insert engineered for productive milling of steel and cast iron with a focus on stable cutting edges and predictable tool life Tiger‑tec Silver coated carbide Suitable for steel and cast iron machining Round 20 mm form for versatile toolholders Chipbreaker A27 for controlled chip formation High productivity through advanced coating and grade The Tiger‑tec Silver technology paired with the WKP35S grade provides a coated carbide solution optimised for the thermal and abrasive conditions encountered when machining steel and cast iron. The combination reduces flank and crater wear, which translates into longer tool life and fewer tool changes. For production environments this means a more consistent cycle time and improved process reliability without altering existing cutting strategies. Consistent chip control and reliable geometry The round 20 form and A27 chipbreaker deliver controlled chip formation for a wide range of cutting parameters. The geometry is designed to handle both continuous and interrupted cuts typical of cast components and heavy milling in steels, improving surface finish and reducing the risk of built‑up edge. The insert’s tolerance class M and 06 thickness ensure repeatable positioning in compatible toolholders, supporting predictable machining results across batches. Versatility, compatibility and practical benefits This insert is supplied in the ROMX2006M0T8-A27 configuration and fits a variety of round‑seat toolholders for flexible tooling layouts. The grade’s balance between toughness and wear resistance allows switching between roughing and semi‑finishing without frequent grade changes, helping to simplify tooling inventories. For users seeking to raise throughput, the insert supports higher cutting speeds where appropriate, while maintaining a controlled wear profile to reduce downtime and optimise cost per part. Contact Metav Werkzeuge for tailored application advice on the Tiger‑tec Silver ROMX2006M0T8-A27 WKP35S insert and availability for your production needs Technical Data SKU: ROMX2006M0T8-A27-WKP35S-WALTER Label: Fräswendeschneidplatte ROMX2006M0T8-A27 WKP35S Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Form: Round Plate size: 20 Thickness: 06 Chipbreaker: A27 Tolerance class: M Execution: X Special features Series: Tiger‑tec Silver Grade: WKP35S Material suitability: P / K (steel / cast iron) Material designation: P / K Wendeplatte designation: ROMX2006M0T8-A27 FAQ What materials is this insert suitable for? The ROMX2006M0T8-A27 WKP35S insert is specified for machining steel (P) and cast iron (K), reflecting the WKP35S grade and Tiger‑tec Silver coating. How does the Tiger‑tec Silver technology affect performance? Tiger‑tec Silver enhances wear resistance and thermal stability on the ROMX2006M0T8-A27 WKP35S, resulting in more consistent edge life and reduced frequency of tool changes. What is the purpose of the A27 chipbreaker? The A27 chipbreaker on this round insert provides controlled chip formation for both continuous and interrupted milling, improving surface finish and chip evacuation. Which toolholders are compatible with the round 20 form? The round 20 form is intended for compatible toolholder systems accepting round‑seat inserts; compatibility should be checked against the holder specifications for seat and clamping geometry. Does the tolerance class M affect positioning accuracy? Yes, tolerance class M ensures repeatable positioning and stable clamping in suitable toolholders, supporting consistent machining results across production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original and factory new.
ROMX250700-G77 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold PVD grade, a G77 chipbreaker and material versatility for a productive milling process; the result is stable chip formation, reliable edge life and reduced tool changes. Order the ROMX250700-G77 WSP45G directly via Metav Werkzeuge or contact our consultants for application-specific cutting data. ROMX250700-G77 WSP45G — Round milling insert, Tiger·tec Gold, Walter Tools The ROMX250700-G77 WSP45G is a round milling insert engineered for versatile milling of steels, stainless steels and heat-resistant superalloys, optimised for stable chip formation and long edge life. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys G77 chipbreaker for stable chip control Round 25 mm insert, thickness 07 Engineered for consistent productivity with coated carbide technology The round insert combines a coated carbide grade and the Tiger·tec Gold treatment to deliver consistent performance in milling operations. The PVD-based coating improves wear resistance and supports a stable cutting edge under the typical heat load encountered when machining steel or tougher alloys. This translates into longer intervals between indexing or replacement, which helps maintain uptime and reduces cumulative tooling costs in production environments. Chip control that stabilises machining and reduces rework A dedicated chipbreaker geometry labelled G77 ensures predictable chip formation and evacuation during milling. Controlled chips reduce the risk of recutting, improve surface finish and decrease machine stoppages caused by chip-related issues. The insert’s geometry supports a smooth flow of swarf in both roughing and finishing passes, helping to keep cycle times steady and enhancing process reliability on mixed production runs. Versatility across materials to simplify tooling inventories Designed for the ISO groups P, M and S, the grade is suitable for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. Using a single insert grade across these materials simplifies tooling decisions, lowers the number of different inserts kept in stock and enables faster reaction to mixed work orders. The result is a leaner inventory and fewer changeovers without compromising machining stability. Precision design and clear tolerance for predictable results The round format and specified tolerance class provide repeatable seating and clamping accuracy in indexable milling systems, while the zero corner radius suits applications where a true radius-free profile is required. The insert’s dimensional stability and repeatable edge condition support consistent part quality, especially in settings where surface integrity and dimensional conformity are critical for downstream assembly or heat-treatment steps. For tailored advice on integrating the Walter Tools ROMX250700-G77 WSP45G into an existing toolset, or for material-specific cutting recommendations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ROMX250700-G77-WSP45G-WALTER Name: ROMX250700-G77 WSP45G Manufacturer: Walter Tools Product type: Milling indexable insert Facts Diameter: 25 mm Thickness: 7.0 mm Corner radius: 0° Tolerance class: M Special features Coating: Tiger·tec Gold PVD Grade: WSP45G (coated carbide) Chipbreaker: G77 Shape: Round Material application: P / M / S FAQ What materials can this insert machine effectively? The ROMX250700-G77 WSP45G is designed for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on this Walter Tools insert improves wear resistance and thermal stability, which helps extend edge life and maintain machining consistency. Is the G77 chipbreaker suitable for finishing as well as roughing? Yes, the G77 chipbreaker provides stable chip control across a range of depths of cut, supporting both roughing and finishing strategies when using the ROMX250700-G77 WSP45G insert. Which insert geometry ensures repeatable seating in the cutter? The round shape combined with the specified tolerance class M offers predictable seating and clamping accuracy, aiding repeatable part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for descriptive purposes only; there is no affiliation implied between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
RPGN090300E WIS10 N Wendeplatten - Walter Tools
High-speed-capable SiAlON grade WIS10 combined with a compact round 09 geometry and an 11° clearance delivers temperature-resistant, productive cutting across a broad range of applications; order via Metav Werkzeuge or contact the technical team for tailored cutting data. RPGN090300E WIS10 – round turning/milling indexable insert, 11° clearance (Walter Tools) The RPGN090300E WIS10 is a round indexable insert engineered for high-speed, temperature-resistant turning and light milling operations where SiAlON ceramic performance is required. SiAlON ceramic grade WIS10 for high speeds Round 09 insert for versatile mounting 11° clearance for stable cutting geometry 3 mm thickness for robust edge support High-speed performance with temperature resistance The SiAlON-based WIS10 grade provides a clear advantage where cutting speeds and heat resistance are decisive. As a ceramic cutting material, SiAlON retains hardness at elevated temperatures and reduces flank wear compared with conventional carbides under matching conditions. This indexable insert geometry, in a round 09 format with an 11° clearance angle, supports consistent chip formation and enables higher cutting speeds without rapid degradation of the cutting edge. The result is improved cycle times and a reduced need for frequent regrinding, which contributes directly to process efficiency. Versatility in mounting and stable cutting behaviour A round insert form allows multiple mounting orientations and improved approach flexibility on toolholders designed for circular inserts, supporting both turning and light milling uses. The compact 09 size paired with a 3 mm plate thickness delivers mechanical strength and edge support, which are essential when switching from roughing passes to finishing cuts. The insert’s geometry promotes controlled chip flow and stable cutting forces, which in turn helps to maintain surface finish and dimensional repeatability on serial components. Productivity and predictable tool life By combining a ceramic grade optimised for high-speed machining with a robust plate geometry, the component fosters higher throughput in suitable material groups. The intrinsic wear resistance of the SiAlON material minimises crater and flank wear under thermal load, allowing for longer tool life in temperature-challenging operations. When applied according to the manufacturer’s cutting data and the material-specific product matrix, the result is a measurable reduction in tool-change frequency and more predictable production cycles, supporting leaner machining processes. Selection guidance and safe application practice Selection of the correct grade and cutting parameters should follow the product matrix and application notes provided by the manufacturer. For the round 09 insert in WIS10, compatibility with the workpiece material, cutting speed, and coolant strategy determines real-world performance. The insert is optimised for materials and operations where SiAlON ceramics excel; verify suitability for specific steel grades and hard or sticky alloys by consulting the technical data sheet. Correct clamping and the use of compatible toolholders are necessary to exploit the insert’s full potential and to ensure stable, repeatable results. Contact Metav Werkzeuge to discuss Walter Tools' WIS10 insert for high-speed machining and obtain application-specific cutting data and tooling recommendations Technical Data SKU: RPGN090300E-WIS10-WALTER Designation: RPGN090300E WIS10 Brand: Walter Tools Product type: Turning/milling indexable insert Series: Walter Schneidstoffsorte - Serie offen Core data Clearance angle: 11° Corner radius: 0 Shape: Round Size: 09 Thickness: 03 Tolerance class: G Special features Grade: WIS10 (SiAlON ceramic) Designation without grade: RPGN090300E ISO designation: RPGN090300E WIS10 Execution: N Catalogue-dependent material specification UID: RPGN090300E-WIS10-WALTER FAQ Is this insert suitable for high-speed turning? Yes. The WIS10 grade is a SiAlON ceramic specifically formulated for high-speed, temperature-resistant cutting; the round 09 geometry supports stable high-speed performance when paired with appropriate toolholders and cutting data. Which materials are best processed with this insert? The insert is designed for workpieces and applications where SiAlON ceramics perform well; suitability for particular steels and alloys should be checked against the product matrix and technical recommendations for the RPGN090300E WIS10 insert. How does the round shape affect chip control? A round insert promotes smooth cutting forces and multiple mounting indexes, which can improve chip control and distribute wear evenly; the combination with an 11° clearance angle helps maintain stable cutting geometry. What should be considered when integrating the insert into a tooling system? Ensure compatibility of the toolholder with a round 09 insert and verify clamping stability; correct clamping and recommended cutting data are important to realise the WIS10 grade’s wear resistance and predictable tool life. Can this insert be used for finishing operations? Yes. The mechanical robustness afforded by the 3 mm thickness and the insert’s ceramic grade allow use in finishing passes within the appropriate speed and feed ranges indicated in the technical documentation. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
RPGN090300E WIS30 N Wendeplatten - Walter Tools
Taking advantage of the combination of high-speed SiAlON ceramic performance, precise 11° clearance geometry, and round‑geometry flexibility ensures productive, temperature‑resistant machining with predictable chip control; order the RPGN090300E WIS30 turning and milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. RPGN090300E WIS30 — Turning and milling indexable insert (SiAlON ceramic) by Walter Tools The RPGN090300E WIS30 is a round indexable insert made from a SiAlON ceramic grade, engineered for high‑speed and temperature‑resistant turning and milling applications SiAlON ceramic grade for high cutting speeds 11° clearance angle for enhanced chip control Round geometry, size 09, thickness 03 Zero corner radius for consistent contouring Achieve reliable performance at high cutting speeds The use of SiAlON ceramic provides a material solution optimised for high cutting speeds and thermal resistance. Ceramics of this class maintain hardness at elevated temperatures, so cutting edges remain sharp where carbide grades would soften; this results in sustained machining performance on demanding operations. The material is especially suitable where reduced cooling or dry machining is sought, and the insert is designed to deliver consistent cutting behaviour under thermal load. Suitability for specific workpiece groups should be verified against the product matrix provided by the manufacturer to ensure the chosen grade matches the machining task. Geometry and edge design for consistent chip control The insert’s round geometry combined with an 11° clearance angle and zero corner radius supports stable cutting and predictable chip flow. The round shape permits multiple cutting orientations, extending effective insert life in interrupted cuts and profiling work. The moderate clearance angle reduces rubbing while supporting secure engagement in varied feed conditions, and the flat corner radius simplifies contouring with repeatable results. These design aspects translate into fewer indexings and reduced process variability during series production. Material and application guidance for selection confidence The base substrate is listed as catalog‑dependent, and the cutting grade is from a Walter open series designed as a SiAlON‑based cutting ceramic. This configuration suits temperature‑resistant machining and high‑speed strategies; however, the final choice must consider the ISO workpiece group and machining conditions. For unfamiliar material classes or when switching from carbide, a review of the product matrix is recommended. Technical data sheets and application matrices are available to support grade selection, and they explain the trade‑offs between surface finish, tool life and achievable metal‑removal rates. Productivity advantages and process reliability Using a purpose‑designed ceramic insert can enable higher spindle speeds and, where applicable, reduced cycle times without compromising component quality. The combination of thermal stability and a robust cutting edge means the insert can deliver predictable tool life in suitable operations, reducing downtime for tool changes and increasing uptime at the machine. The Walter Tools pedigree contributes to process confidence, with the insert intended for integration into established toolholders and machining routines where high‑speed performance is required. Contact Metav Werkzeuge for expert guidance on integrating Walter Tools ceramic inserts into machining processes, and to arrange supply or request the product matrix for informed selection via Metav Werkzeuge. Technical data Article number: RPGN090300E-WIS30-WALTER Designation: RPGN090300E WIS30 Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 11° Corner radius: 0 Plate size: 09 Plate thickness: 03 Tolerance class: G Execution: N Materials & features Cutting grade: SiAlON ceramic (WIS30) Shape: Round Material specification: Katalogabhängig Intended use: High cutting speeds, temperature‑resistant machining (check ISO workpiece group) FAQ What materials is this insert suitable for? The RPGN090300E WIS30 insert uses a SiAlON ceramic grade intended for temperature‑resistant, high‑speed machining; suitability for specific materials should be checked in the product matrix against the ISO workpiece group. Can this insert be used dry or with reduced coolant? SiAlON ceramic grades are designed for thermal stability and can perform under reduced coolant conditions depending on the workpiece and cutting parameters; the RPGN090300E WIS30 is optimised for such high‑temperature strategies. How does the round geometry affect tool life? Round inserts allow multiple cutting orientations and better distribution of wear, which can extend effective tool life in interrupted cutting and profiling applications when using the Walter Tools insert. What does the zero corner radius mean for finishing? A zero corner radius provides a defined edge for contouring and consistent contact geometry, which supports predictable surface results when the correct feeds and speeds are applied to the RPGN090300E WIS30. Where can the product matrix and application data be obtained? The manufacturer’s product matrix and application recommendations are available from Metav Werkzeuge; consult the matrix to confirm the WIS30 grade against the intended ISO workpiece group. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
RPGN090300T01020 WIS10 WIS10 Wendeplatten - Walter Tools
Take advantage of the combination of high-speed capability, stable SiAlON cutting performance and precise interchangeability for efficient machining cycles; order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. RPGN090300T01020 WIS10 Round Turning/Milling Insert, SiAlON Ceramic, 11° Clearance — Walter Tools RPGN090300T01020 WIS10 is a round indexable insert designed for high-speed turning and milling tasks in the ISO material groups specified by the product matrix SiAlON ceramic for high cutting speeds 11° clearance angle for secure chip flow Round format for versatile profile finishing Tolerance class G for consistent interchangeability High-speed performance with temperature-resistant cutting material The WIS10 grade is a SiAlON cutting ceramic developed for high cutting speeds and sustained performance under elevated temperatures. Its composition makes the insert suitable where conventional carbide tools reach their limits; the material resists thermal degradation and preserves the cutting edge during demanding passes. This characteristic translates into faster cycle times and potentially longer periods between tool changes when the workpiece material matches the ISO groups indicated in the manufacturer's product matrix. Consistent geometry and controlled chip behaviour for predictable results With a round geometry and a declared 11° clearance, the insert provides a predictable chip flow and stable engagement in both turning and face milling operations. The tolerance class G ensures interchangeability across holders that accept this designation, supporting machine uptime and process repeatability. The specified corner radius of 0 gives a true sharp edge for defined profiling; when a precise form or fine finishing is required, the insert’s geometry supports accurate contour reproduction without unnecessary tool-induced deviation. Application guidance, inspection and integration into the toolset The insert’s catalog-dependent material designation means suitability depends on the selected product variant and the ISO workpiece grouping; therefore, verification against the product matrix is recommended before deployment. The SiAlON-based grade offers advantages for temperature-sensitive machining and for materials that generate high thermal loads at the cutting zone. As a component of a modular tooling system, the round indexable insert can simplify inventory and support a variety of holder styles; consult the technical data sheet and holder compatibility lists to ensure correct seating and clamping for optimal performance. Contact Metav Werkzeuge for tailored application advice and to specify the Walter Tools WIS10 insert for high-speed machining; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: RPGN090300T01020-WIS10-WALTER ISO designation: RPGN090300T01020 WIS10 Grade: WIS10 Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 11° Insert shape: Round Insert size: 09 Thickness: 03 Corner radius: 0 Tolerance class: G Execution: N Special features Cutting material: SiAlON cutting ceramic (see product matrix) Format: Round insert for turning and milling applications Material designation: Catalog-dependent Series note: WIS10 is a Walter cutting grade optimised for high-speed, temperature-resistant machining FAQ What machining tasks suit this SiAlON grade? The WIS10 SiAlON grade is intended for high-speed operations and temperature-resistant machining; suitability for specific workpiece materials should be verified against the product matrix for the RPGN090300T01020 WIS10 insert. Can this round insert be used for both turning and face milling? Yes, the round format and geometry of this indexable insert allow use in turning and certain face milling setups where the holder and clamping design accept the RPGN090300T01020 form. How does the 11° clearance angle affect cutting performance? The 11° clearance reduces rubbing on the flank face and promotes controlled chip flow, supporting consistent surface finish and stable cutting forces when the tool is used within its recommended parameters. Is the RPGN090300T01020-WIS10-WALTER interchangeable with other G tolerance inserts? The tolerance class G indicates consistent dimensional control; compatibility depends on the clamping system and should be confirmed with the holder specification to ensure correct seating and repeatability. Where to find detailed compatibility and material recommendations? Refer to the manufacturer's product matrix and technical documentation for the RPGN090300T01020 WIS10 insert to determine ISO material group suitability and recommended cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
RPGN090300T01020 WIS30 N Wendeplatten - Walter Tools
Take advantage of the combination of high-speed SiAlON performance, precise geometry and robust manufacturing quality for reliable machining results; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. RPGN090300T01020 WIS30 turning and milling indexable insert, 11° free angle — Walter Tools A RPGN090300T01020 WIS30 indexable insert engineered for high-speed ceramic cutting in suitable ISO material groups for both turning and light milling applications. SiAlON cutting ceramic for high cutting speeds 11° free cutting angle for secure chip flow Round form, size 09 for versatile milling and turning High-speed ceramic performance that raises productivity The WIS30 grade is a SiAlON cutting ceramic developed for high cutting speeds and thermal resistance; this enables shorter cycle times where the ISO material group and cutting strategy permit. Ceramic grades such as this are designed to tolerate elevated temperatures and maintain edge integrity when used under appropriate conditions. Machining strategies must be aligned with the workpiece material and machine rigidity, since ceramic inserts favour stable, high-speed approaches rather than heavy interrupted cuts. The result is a significant potential increase in throughput when the process is configured correctly. Precision geometry for repeatable chip control and surface quality The insert’s geometry, including the 11° free cutting angle and round form, contributes to controlled chip formation and predictable tool contact. The designation carries a tolerance class G, which supports consistent seating and repeatable positioning in compatible toolholders. With a corner radius of 0, the edge geometry focuses on sharp engagement and minimal rubbing, which benefits surface finish in finishing passes. These geometric elements are central to converting the material properties of the grade into consistent part quality across batch production. Practical selection guidance and application checks This insert is suitable for both turning and milling tasks where a ceramic grade is specified; however, applicability depends on the concrete ISO material group indicated in the product matrix. The WIS30 series is presented as an open cutting-grade line by the manufacturer, and selection should be based on the workpiece material, machine capability and the intended cutting parameters. For varied production environments, the round form and size 09 offer flexibility in toolpath planning while the thin plate thickness (03) supports precise depth control. Consultation of the manufacturer’s matrix ensures the grade choice matches the intended material and process. For high-speed SiAlON ceramic machining guidance and order placement, contact Metav Werkzeuge for personalised advice and to confirm compatibility with current production requirements; eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data SKU: RPGN090300T01020-WIS30-WALTER Designation: RPGN090300T01020 WIS30 Series: Walter cutting-grade series (open) Grade: WIS30 Facts Free angle: 11° Plate size: 09 Plate thickness: 03 Corner radius: 0 Tolerance class: G Plate form: Round Execution: N Special features SiAlON cutting ceramic (WIS30) Engineered for high cutting speeds and thermal resistance Intended suitability dependent on ISO material group — check product matrix Round insert design for versatile toolpath use FAQ Which materials are best suited for this insert? The RPGN090300T01020 WIS30 insert uses a SiAlON ceramic cutting grade and is intended for high-speed machining where the specific ISO material group matches the grade; suitability should be confirmed via the product matrix. Can the insert be used for both turning and milling operations? Yes, the designation specifies turning and milling capability for the insert, and the round form supports versatile applications in both processes when cutting parameters are adjusted for ceramic performance. What does the WIS30 grade indicate? WIS30 identifies a Walter Tools SiAlON ceramic grade formulated for temperature-resistant, high-speed cutting; exact application limits are determined by the ISO workpiece group. How does the 11° free angle affect cutting? The 11° free angle reduces rubbing and improves chip flow under appropriate cutting conditions, helping to maintain edge life and surface quality in high-speed applications. Is a coating listed for this insert? No coating is specified in the available data for this grade; the product is characterised by its SiAlON ceramic composition rather than an additional coating. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
RPGN120400E WIS10 WIS10 Wendeplatten - Walter Tools
Benefit from the combination of a SiAlON ceramic grade for high cutting speeds, a precise 11° clearance angle and a compact 12 mm round form for reproducible finishing results; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. RPGN120400E WIS10 — turning / milling indexable insert, SiAlON ceramic, 11° clearance (Walter Tools) The RPGN120400E WIS10 is a round turning and milling indexable insert engineered for high-speed finishing and stable, temperature-resistant machining in applications defined by the ISO workpiece matrix SiAlON ceramic grade WIS10 Round insert, 12 mm diameter 11° clearance angle for high-speed turning Zero corner radius for precise profiling High-speed performance through advanced cutting ceramic The insert uses a SiAlON cutting-ceramic grade (WIS10) designed for high cutting speeds and improved thermal resistance. This composition supports sustained machining at elevated temperatures, which translates into higher throughput on suitable materials and more consistent tool life. The ceramic chemistry prioritises stable chip formation and reduces thermal wear, so machining cycles remain productive even under demanding conditions. Check the product matrix for precise ISO-group suitability before selecting cutting data. Geometry that improves surface quality and dimensional control The combination of a round 12 mm form and an 11° clearance angle gives a balanced contact geometry that lowers vibration and supports stable cutting forces. The zero corner radius allows for fine profiling and narrow feature work without unintended material removal, which benefits finishing passes where surface quality and repeatability are essential. These geometric choices contribute to consistent finishes and reduced rework in series production. Practical guidance for application and parameter selection Selection of feeds and speeds should be based on the indicated SiAlON behaviour and the ISO material group for the workpiece; the insert’s catalogue-dependent backing material and grade mean that recommended cutting data will vary. The insert is suitable for indexable turning and certain milling operations where a small round insert is required; consult the machining matrix to confirm compatibility with specific steels, cast irons or non-ferrous materials before trialling at production conditions. Operational advantages and economic rationale for workshops Using a ceramic grade that tolerates heat and sustains sharp cutting edges can reduce tool-change frequency and improve cycle times, delivering clear productivity benefits. The design emphasises repeatability and process stability, helping to achieve predictable tool-life figures and consistent part quality batch after batch. Backed by Walter Tools’ reputation for precision tooling, this insert supports efficient machining strategies that lower total machining cost per part. For tailored cutting data or to confirm suitability of the Walter Tools RPGN120400E WIS10 for a specific application, contact Metav Werkzeuge for expert machining advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RPGN120400E-WIS10-WALTER ISO designation: RPGN120400E WIS10 Series: Walter Schneidstoffsorte - Serie offen Grade: WIS10 Key dimensions Diameter: 12 Thickness: 04 Clearance angle: 11° Corner radius: 0 Tolerance class: G Execution: N Features / suitability SiAlON cutting ceramic (WIS10) Shape: Round Material: catalogue-dependent Intended for turning and milling indexable applications Check product matrix for workpiece suitability FAQ Which materials is this grade suited to? The WIS10 grade is a SiAlON cutting ceramic; suitability depends on the ISO workpiece group and should be verified against the product matrix for the RPGN120400E WIS10 (Walter Tools) to ensure correct application. What does the 11° clearance angle imply for cutting behaviour? An 11° clearance reduces rubbing behind the cutting edge and helps maintain a clean shearing action at high speeds, contributing to stable cutting forces and improved surface finish when using the RPGN120400E WIS10 insert. How does a zero corner radius affect machining results? A zero corner radius provides precise profiling and allows fine-detail finishing without adding corner build-up, making the insert suitable for narrow radii and detailed contours in turning or light milling operations. Is this insert intended for interrupted cuts or continuous finishing? The ceramic composition and geometry favour high-speed finishing and applications where thermal resistance and edge stability are required; suitability for interrupted cuts should be validated within the machining matrix for the specific workpiece material. How should cutting data be chosen for this insert? Cutting speeds and feeds for the RPGN120400E WIS10 must be selected in accordance with the SiAlON behaviour and the target ISO material group; consult the machining recommendations and perform a short trial to establish optimal parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original and new from the manufacturer.
RPGN120400E WIS30 N Wendeplatten - Walter Tools
Take advantage of a combination of high cutting-speed capability and consistent tool life to boost throughput while reducing tool changeovers; the SiAlON-based grade offers thermal stability for demanding operations. Contact Metav Werkzeuge for technical matching or order original Walter Tools inserts through the dealer network. RPGN120400E WIS30 turning/milling indexable insert by Walter Tools — round shape, 11° relief RPGN120400E WIS30 is a round indexable insert designed for high-speed turning and milling in the ISO material groups for which SiAlON ceramics are appropriate SiAlON ceramic grade WIS30 for high speeds 11° relief angle for stable cutting geometry Round plate, diameter 12 mm for versatile use Corner radius 0 for sharp profiling Boosted throughput through high-speed ceramic cutting The SiAlON-based WIS30 grade is engineered for high cutting speeds and thermal resistance, enabling shorter cycle times on suitable components. As a cutting-ceramic solution, this insert maintains a stable cutting edge at elevated temperatures, which translates into fewer interruptions for tool changes and a more predictable process rhythm. For production environments where machining speed and consistent surface quality matter, the use of a ceramic insert like this supports improved component throughput while keeping tool management straightforward. Predictable process behaviour and integration into production A round, indexable design with an 11° relief and a defined corner radius of 0 contributes to reliable chip formation and predictable tool engagement. The geometry minimises vibration in interrupted cuts and can simplify fixture and toolholder selection compared with non-indexable alternatives. Because the grade is specified as SiAlON ceramic, process parameters should be set according to the material group in the product matrix; this ensures stable wear behaviour and repeatable results across batches, improving overall process reliability. Clear compatibility and practical application guidance The insert is intended for machining tasks where ceramic grades are applicable; suitability depends on the target ISO material group. The designation RPGN120400E WIS30 identifies a round insert with a 12 mm diameter and thickness code 04, matched to Walter Tools’ open series of cutting grades. When selecting this ceramic insert, consider workpiece material, cutting speed and machine rigidity: ceramic grades excel in hard, high-temperature cuts but require sufficient stiffness and appropriate feeds to avoid chipping. Technical matching with the product matrix helps ensure the right combination of grade and geometry for the intended component. Contact Metav Werkzeuge to discuss the suitability of Walter Tools WIS30 inserts for the application and to request specific product matching or a quotation Technical data Article number: RPGN120400E-WIS30-WALTER SKU: RPGN120400E-WIS30-WALTER ISO designation: RPGN120400E WIS30 Product type: Turning indexable insert / milling indexable insert Brand: Walter Tools Core data Free angle: 11° Corner radius: 0 Plate diameter: 12 Thickness code: 04 Tolerance class: G Features Grade: WIS30 (SiAlON cutting ceramic) Plate shape: round Series: Walter Schneidstoffsorte - Serie offen Application note: suitability per product matrix (check ISO material group) Wendeplatte designation: RPGN120400E WIS30 FAQ What materials is this ceramic grade suitable for? The WIS30 SiAlON grade is suitable for applications defined in the Walter product matrix; suitability depends on the specific ISO material group of the workpiece and should be checked against the grade recommendations. Can the insert be used for both turning and milling operations? Yes, the RPGN120400E WIS30 is specified as a turning and milling indexable insert and its round form supports versatile engagement geometries for both operation types. How does the 11° relief angle affect cutting performance? An 11° relief angle helps maintain a stable cutting geometry and supports predictable chip formation; this contributes to improved surface finish and process stability when combined with the right speed and feed settings. Is technical matching available for specific parts or materials? Technical matching is recommended: Metav Werkzeuge can assist in selecting the correct grade and geometry for the application to ensure the best balance of tool life and part quality. Manufacturer: Walter Tools (Walter AG), Hauptsitz Tübingen, Germany — The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. The offered item is an original, factory-new product of the manufacturer.
RPGN120400T01020 WIS10 Wendeplatten - Walter Tools
Take advantage of the combination of high-speed-capable SiAlON cutting grade, precise 11° free angle and a compact round form for consistent, productive machining. Order the insert directly via Metav Werkzeuge or contact the consultants for advice on material compatibility and integration. RPGN120400T01020 WIS10 — Walter Tools round indexable insert, SiAlON grade, 11° free angle The RPGN120400T01020 WIS10 is a round indexable insert designed for high-speed, temperature-resistant machining where SiAlON ceramic performance is required in suitable ISO material groups. SiAlON ceramic for high cutting speeds 11° free angle for versatile engagement Round 12 form for flexible insert orientation Sharp edge (r=0) for defined cutting geometry High-speed performance from SiAlON technology This round indexable insert is supplied in the WIS10 SiAlON ceramic grade, engineered for elevated cutting speeds and improved thermal stability. The ceramic composition maintains edge integrity at temperatures that would soften conventional carbides, enabling faster material removal rates in appropriate applications. Translating ceramic characteristics into shop-floor benefits means shorter cycle times and lower risk of thermal edge breakdown when the workpiece and process fit the ISO material group indicated in the product matrix. Geometry that supports consistent engagement and surface quality A 11° free angle provides a balanced approach between tool engagement and clearance, reducing rubbing and heat generation at the flank. The round 12 form allows multiple index positions and stable contact for interrupted cuts or form turning, while the zero corner radius produces a defined cutting edge for predictable dimensioning. Together, these geometric traits support steady surface results and repeatable tool life when combined with the appropriate feeds and speeds for SiAlON ceramics. Application guidance and material scope The insert is intended for use where SiAlON ceramics are suitable; specific material compatibility must be verified against the ISO workpiece groups in the product matrix. The grade excels in temperature-resistant machining and is often selected for non-ferrous high-temperature alloys or hard-to-machine steels where carbide limitations appear. Because ceramics demand different cutting strategies, choose cutting parameters optimised for brittle-hard materials to exploit the WIS10 performance while avoiding undue edge chipping. Integration, inspection and procurement advantages Tolerance class G and a standardised round form simplify replacement and setup in compatible toolholders, reducing machine downtime. The plate thickness and exact dimensions follow the product coding for straightforward matching to existing tool systems. For procurement and technical queries, Metav Werkzeuge provides material-matching support and can assist in selecting the correct ISO group and machining data to ensure the insert delivers the intended cycle-time and surface benefits. Contact Metav Werkzeuge for tailored recommendations on integrating the Walter Tools RPGN120400T01020 WIS10 insert into the production process — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and availability Technical Data Article number: RPGN120400T01020-WIS10-WALTER Label: Drehwendeschneidplatte / Fräswendeschneidplatte RPGN120400T01020 WIS10 Walter Tools ISO designation: RPGN120400T01020 WIS10 Facts Free angle: 11° Corner radius: 0 Plate form: Round Plate size: 12 Plate thickness: 04 Tolerance class: G Special features Series: Walter Schneidstoffsorte - Serie offen Grade: WIS10 (SiAlON cutting ceramic) Execution: N Temperature-resistant machining capability Suitability: Check ISO material group in product matrix FAQ What materials is this insert suitable for? The insert is supplied in the WIS10 SiAlON grade and is suitable where SiAlON ceramics match the ISO workpiece group; consult the product matrix to confirm compatibility. How does the 11° free angle affect machining? An 11° free angle reduces flank contact and heat build-up; with the WIS10 ceramic grade this supports higher cutting speeds while maintaining edge stability. Is the round form advantageous for interrupted cuts? Yes, the round 12 form offers multiple indexing positions and stable engagement, making it a practical choice for interrupted or form machining. What does the zero corner radius mean for edge behaviour? A corner radius of 0 creates a sharp, well-defined cutting edge that can improve dimensional precision; appropriate cutting parameters must be used to avoid edge chipping with ceramic grades. Where to get help selecting cutting data for this insert? Metav Werkzeuge can advise on cutting parameters and suitable ISO groups for the RPGN120400T01020 WIS10 insert — contact info@metav-werkzeuge.com for assistance. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
RPGN120400T01020 WIS30 N Wendeplatten - Walter Tools
Choose the high-speed performance and temperature resistance of the WIS30 SiAlON ceramic grade together with the compact 11° clearance for reliable, productive finishing; order the RPGN120400T01020 WIS30 insert through Metav Werkzeuge or consult their specialists for application support. RPGN120400T01020 WIS30 — Indexable insert for turning and milling, SiAlON ceramic, 11° clearance, Walter Tools RPGN120400T01020 WIS30 is a round indexable insert engineered for high-speed, temperature-resistant machining in demanding applications where ceramic grades bring clear performance advantages SiAlON ceramic grade for high speeds 11° clearance angle for stable cutting Round form for versatile tool paths 12 mm size for compact toolholders Maximise process speed with ceramic cutting technology The SiAlON-based grade delivers a clear advantage where high cutting speeds and heat resistance are required. As a ceramic cutting grade, WIS30 is designed to maintain edge integrity at elevated temperatures, which reduces the need for conservative speed reduction and enables shorter cycle times. This leads to improved throughput on finishing passes and productive roughing cycles where temperature control would otherwise limit cutting parameters. The round geometry additionally supports varied tool orientations, making the insert suitable for interpolated and profile milling as well as turning operations. Consistent chip control and surface quality for reliable production A generous 11° clearance angle helps to maintain consistent cutting conditions across the edge, reducing rubbing and promoting efficient chip formation with this insert. Stable chip formation is a decisive factor for consistent surface quality and repeatable dimensional results in series production. Where materials or process windows cause heat build-up, the grade’s thermal stability contributes to reduced edge wear and a lower tendency for built-up edge, which in turn supports predictable tool life and less frequent index changes. Compact geometry for flexible toolset-ups and tool life economy The insert’s round form and modest 12 mm size make it well suited to compact toolholders and multi-axis arrangements, delivering flexibility for tight setups or small-diameter tool bodies. The combination of a ceramic cutting edge and compact geometry supports longer intervals between interventions in many high-speed finishing tasks, translating into fewer tool changes and improved machine utilisation. For production environments focused on throughput, this can mean a measurable reduction in downtime and a more economical machining cycle overall. Application guidance and compatibility notes for planners Selection of ceramic grades always depends on the ISO workpiece group and the intended cutting strategy; refer to the product matrix for the specific workpiece class suitability before operation. The insert is intended for applications where heat-resistant cutting and higher speeds are priorities; for softer or highly ductile materials alternative grades may be preferable. For process planning, consult Metav Werkzeuge for recommendations on cutting data and matching toolholders to ensure optimal engagement and chip evacuation. For high-speed finishing with the WIS30 ceramic grade, contact Metav Werkzeuge for availability and tailored application advice — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RPGN120400T01020-WIS30-WALTER Designation: RPGN120400T01020 WIS30 Series: Walter Schneidstoffsorte - Serie offen Grade: WIS30 Facts Clearance angle: 11° Corner radius: 0 Insert form: Round Size: 12 Thickness: 04 Tolerance class: G Execution: N Special features Cutting material: SiAlON ceramic cutting grade Intended for high cutting speeds and temperature-resistant machining Sortenbeschreibung: WIS30 is a Walter ceramic grade; suitability per ISO groups to be checked Round insert supports multi-directional cutting FAQ What materials is this insert suited for? The RPGN120400T01020 WIS30 insert employs a SiAlON ceramic grade and is intended for high-speed, temperature-resistant machining; suitability must be checked against the product matrix for the specific ISO workpiece group. How does the 11° clearance angle affect cutting? An 11° clearance angle reduces rubbing at the flank and supports stable chip formation with the ceramic grade, helping to preserve edge condition and improve surface finish during high-speed cuts. Is this insert suitable for both turning and milling operations? Yes, the round geometry of the insert allows use in both turning and milling toolholders where the tooling system accepts the RPGN120400T01020 form and the process demands a ceramic cutting grade. What should be checked before selecting this grade? Check the ISO workpiece classification and consult the Walter Tools product matrix for WIS30 to confirm material compatibility and recommended cutting data for the intended application. Can this insert be used in interrupted cuts? Ceramic grades are generally sensitive to shock loads; evaluate the machining scenario for potential impact or interruptions and refer to Walter Tools guidelines and Metav Werkzeuge for application-specific advice. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked brand names and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer. Walter Tools is mentioned as the product manufacturer.
SCGT09T304-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for reliable machining of stainless steels and heat-resistant superalloys; the square 90° form with a 0.4 mm corner radius provides strong cutting edges and repeatable indexing for series production. Order the insert directly via Metav Werkzeuge or contact the technical consultants for tailored recommendations. SCGT09T304-FM2 WSM20S — Indexable turning insert, Tiger·tec Silver, for stainless steel and superalloys | Walter Tools The SCGT09T304-FM2 WSM20S is a square 90° indexable turning insert designed for stable cutting in stainless steels and heat‑resistant superalloys, combining a Tiger·tec Silver coated grade with an FM2 chipbreaker for controlled chip formation. Tiger·tec Silver coated carbide grade WSM20S Designed for stainless steel and superalloys Square 90° form with 0.4 mm corner radius FM2 chipbreaker and 7° clearance angle Consistent cutting performance with a premium coated grade The combination of the Tiger·tec Silver coating and the WSM20S carbide grade delivers improved heat resistance and a robust cutting edge that supports stable chip formation when tackling difficult‑to‑cut materials. This engineered coating reduces thermal and chemical wear at the cutting zone, which translates into consistent tool life and predictable results in medium to high‑volume production. The specification is optimised for materials that tend to work‑harden or form built‑up edge, so the cutting grade prioritises edge security and repeatable performance. Geometry that strengthens the edge and simplifies tool handling The square 90° form with a 0.4 mm corner radius and a thickness class of T3 provides a balance between strength and versatility. A larger corner radius increases edge resilience under interrupted cuts, while the square geometry allows straightforward indexing for multiple edges, reducing downtime. The 7° clearance angle helps to reduce rubbing and heat transfer into the flank face, supporting more stable surface finishes without sacrificing edge life. These geometric choices are particularly advantageous where repeatability and component quality matter most. Controlled chip flow for safer machining and improved surface finish The FM2 chipbreaker is designed to manage chips in challenging materials, promoting short, controllable fragments and reducing the risk of entanglement or damage to the workpiece. By encouraging consistent chip evacuation and limiting the tendency for built‑up edge on the cutting face, the chipbreaker supports higher productive feeds and steadier cut conditions. For operations where surface integrity and process reliability are priorities, the engineered chip control reduces rejects and eases downstream inspection. Industrial reliability for series production Specified to tolerance class G, this indexable turning insert is suitable for production environments that require predictable interchangeability and minimal variation between edges. The coated grade and shape are selected to deliver stable cutting behaviour across batches, making the insert a practical choice for job shops and OEM machining lines working with stainless steels and superalloys. Backed by the Walter Tools portfolio, the component is intended to integrate into established tooling systems where consistent performance and longer tool life contribute directly to process economy. For machining stainless steel and superalloy components with an emphasis on edge stability and repeatable results, request application advice or place orders through Metav Werkzeuge — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, to ensure the best holder and grade selection for the task. Technical Data SKU: SCGT09T304-FM2-WSM20S-WALTER ISO designation: SCGT09T304-FM2 WSM20S Internal designation: SCGT09T304-FM2 Grade: WSM20S Series: Tiger·tec Silver Product type: Indexable turning insert Chipbreaker: FM2 Core data Corner radius: 0.4 mm Clearance angle: 7° Plate size: 09 Form: Square 90° Thickness: T3 Tolerance class: G Materials & features Applicable for: Stainless steel (M), Superalloys/Titanium (S) Coating technology: Tiger·tec Silver Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The SCGT09T304-FM2 WSM20S is suitable for stainless steels (M) and heat‑resistant superalloys (S), following the intended ISO 513 group assignments for the grade. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver improves thermal resistance and reduces abrasive and chemical wear, helping the WSM20S grade to maintain a stable cutting edge and extend tool life in demanding materials. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker promotes controlled, short chips and consistent evacuation, which reduces built‑up edge risk and supports improved surface finishes when turning stainless steel and superalloys. What does a 0.4 mm corner radius and square form mean for operation? A 0.4 mm corner radius increases edge robustness for interrupted or heavy cuts, while the square 90° form offers multiple usable cutting edges and simple indexing for repeatable setups. Is this insert appropriate for finishing stainless steel components? Depending on the holder geometry and cutting parameters, the SCGT09T304-FM2 WSM20S can be used for finishing operations in stainless steel, offering improved surface quality due to controlled chip formation and edge stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a leading family of precision tooling brands. Protected trademarks and product names mentioned belong to their respective owners. Brand names and registered trademarks are cited solely for explanation; there is no affiliation between Metav Werkzeuge and the trademark holders. The offered item is original, factory‑new merchandise from the manufacturer.
SCGT09T304-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WNN10, a controlled FN2 chipbreaker, and the robust square 90° form to maintain stable turning cycles and consistent part quality; order directly via Metav Werkzeuge or consult the technical team for material-specific selection. SCGT09T304-FN2 WNN10 – Indexable turning insert, square 90°, 0.4 mm corner radius (Walter Tools) The SCGT09T304-FN2 WNN10 is a square 90° indexable turning insert intended for precision external turning where reliable chip control and stable cutting edges are required Coated carbide grade WNN10 Square 90° insert for stable clamping FN2 chipbreaker for controlled chips 0.4 mm corner radius, 7° clearance angle Productive cutting with proven coated carbide The combination of a coated carbide substrate and the WNN10 grade is designed to deliver predictable performance under standard turning conditions. The FN2 chipbreaker assists in producing short, manageable chips, reducing interruptions in automated setups and lowering the risk of entanglement or component damage. This combination aims to improve tool utilisation and contribute to smoother production flow by limiting unplanned stoppages. The data supplied with the insert should be consulted alongside the machine and process parameters to calculate achievable cutting speeds and feeds for specific tasks. Stable edge geometry for consistent part quality A square 90° form combined with a 0.4 mm corner radius provides a good balance between edge strength and surface finish. The modest radius increases resistance to chipping while still allowing acceptable surface quality on turned components, particularly in operations that demand repeatable results. The 7° clearance angle reduces rubbing at the flank and helps maintain dimensional accuracy over longer tool life. The insert’s T3 thickness contributes to clamping stability in standard toolholders, supporting vibration damping and consistent cutting conditions. Straightforward integration and process security The SCGT format ensures compatibility with many standard turning toolholders, facilitating quick retrofits without complex tool changes. The designation SCGT09T304-FN2 identifies the geometry and chipbreaker, while the WNN10 marking denotes the coated hardmetal grade; however, the exact substrate and coating characteristics may be catalogue-dependent, so verification against the product matrix is recommended. Where process reliability is critical, combining this insert’s chip control with appropriate cutting parameters promotes predictable metal removal and less scrap, supporting economic machining. Selection guidance and application notes Material suitability should be checked in the manufacturer’s product matrix because the WNN10 coated grade is optimised for a defined range of applications and workpiece materials. For new applications or mixed-material production, a short trial under representative conditions is recommended to validate feeds and speeds. The open series designation indicates flexibility in ordering variants; technical documentation provides the precise coating and substrate details. For customers seeking process stability and clear documentation, the insert supports structured tool selection and traceable setup records. For advice on integrating Walter Tools inserts into current tooling systems or to confirm suitability for a specific material matrix, contact Metav Werkzeuge – info@metav-werkzeuge.com or call +49 2822 7131930, and request guidance referencing the SCGT09T304-FN2 WNN10 insert. Technical data Article number / SKU: SCGT09T304-FN2-WNN10-WALTER Designation: SCGT09T304-FN2 WNN10 Series: Walter Schneidstoffsorte - Serie offen Numbers / Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features / Versions Chipbreaker: FN2 Coating / grade: WNN10 (coated hardmetal) Geometry: SCGT format Material details: catalogue-dependent FAQ What materials is this insert best suited for? Material suitability for the SCGT09T304-FN2 WNN10 insert should be confirmed in the manufacturer’s product matrix; the WNN10 designation indicates a coated hardmetal grade tailored for a defined range of turning tasks How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on the SCGT09T304-FN2 promotes controlled, short chip formation, improving handling in automated or multi-station lathes and reducing the likelihood of chip-related interruptions Can the insert be used in standard SCGT toolholders? Yes, the insert’s SCGT format and T3 thickness are compatible with common SCGT toolholders, offering straightforward integration and stable clamping for routine turning operations What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength and resistance to chipping, supporting consistent surface quality while maintaining acceptable cutting forces for typical turning cycles Is the coating and substrate consistent across all batches? The WNN10 grade is a defined coated hardmetal class, but precise substrate and coating details are catalogue-dependent; consult the technical datasheet or product matrix for batch-specific information Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCGT09T304-MM4 WSM01 MM4 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, reliable chip control and consistent edge life for demanding turning and drilling applications; order the insert directly via Metav Werkzeuge or consult our technical team for process integration. SCGT09T304-MM4 WSM01 — Square 90° Indexable Insert, Tiger‑tec Silver by Walter Tools The SCGT09T304-MM4 WSM01 is a square 90° indexable insert optimised for heavy-duty machining of rostfreiem Stahl and heat‑resistant superalloys in turning and drilling-adjacent operations Tiger‑tec Silver for thermal stability and wear resistance Optimised MM4 chipbreaker for controlled chips 0.4 mm corner radius for repeatable edge life Increased process reliability through coated‑carbide performance The Tiger‑tec Silver coating and the WSM01 grade combine to deliver consistent tool life and lower risk of built-up edge during continuous production runs. The coated carbide substrate provides improved resistance to thermal degradation; together with the MM4 chipbreaker, it promotes predictable chip formation and evacuation. This results in fewer interruptions for tool changes and reduced scrap rates, supporting higher machine utilisation and dependable component quality. Purpose-built for rostfreiem Stahl and demanding superalloys The grade is specified for ISO groups M and S — that is, rostfreiem Stahl and heat‑resistant superalloys or titanium alloys. These materials generate elevated temperatures and tend to produce tough, stringy chips; the insert’s coating and geometry are engineered to maintain a stable cutting edge under those conditions. For shops transitioning from conventional grades, the insert helps reduce risks associated with work‑hardening and thermal loading, making it suitable where process security and repeatable surface finish matter. Geometry and tolerances for consistent machining results The Square 90° form, 7° relief angle and 0.4 mm corner radius combine to offer a balanced profile between robustness and versatility. The T3 thickness and tolerance class G ensure repeatable seating in toolholders and consistent cutting engagement across indexings. Such geometric stability simplifies tooling management: fewer adjustments are required, insert indexing is reliable and finished part tolerances remain constant over long production cycles, which supports efficient downstream processes. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts such as SCGT09T304-MM4 WSM01 — our consultants provide machining parameters and compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SCGT09T304-MM4-WSM01-WALTER Name: SCGT09T304-MM4 WSM01 Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Core specifications Shape: Square 90° Size: 09 Thickness: T3 Relief angle: 7° Corner radius: 0.4 mm Chipbreaker: MM4 Tolerance class: G Applications & features Material designation: S / M Suitable for rostfreiem Stahl (ISO M) Suitable for heat‑resistant superalloys / titanium (ISO S) Coated carbide grade designed for stable chip control FAQ What materials is this insert best suited for? The SCGT09T304-MM4 WSM01 from Walter Tools is intended for ISO groups M and S, making it suitable for rostfreiem Stahl and heat‑resistant superalloys, where thermal stability and chip control are critical. How does the MM4 chipbreaker affect performance? The MM4 chipbreaker on the SCGT09T304-MM4 WSM01 promotes controlled chip formation and evacuation, reducing the likelihood of entangling chips and improving surface finish consistency during long production runs. What does the tolerance class G mean for tool setup? Tolerance class G indicates tight manufacturing tolerances for the insert, ensuring consistent seating and repeatable geometry when indexing, which simplifies setup and reduces positional variation in the machining process. Can this insert be used for finishing as well as roughing? Depending on the chosen cutting parameters and holder setup, the insert’s geometry and 0.4 mm corner radius allow a balance between robust roughing and acceptable finishing results; parameter optimisation is recommended. Is a special holder required for the Square 90° form? The square 90° form uses standard indexable insert holders compatible with SCGT‑style seats; ensure the holder matches the insert thickness T3 and tolerance G for secure clamping. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and indicate no affiliation. The offered item is original, factory‑new merchandise of the manufacturer.
SCGT09T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust MM4 chipbreaker and precise geometry for reliable machining of difficult materials; order the insert directly via Metav Werkzeuge or consult our application specialists for process optimisation. SCGT09T304-MM4 WSM20S – Indexable insert for boring and external turning with Tiger·tec Silver coating (Walter Tools) The SCGT09T304-MM4 WSM20S is a square 90° indexable insert designed for demanding turning and boring operations in stainless and heat-resistant alloys. Tiger·tec Silver coated grade WSM20S Optimised MM4 chip control for stable cutting Suitable for rostfreier Stahl and superalloys 0.4 mm corner radius with 7° clearance Consistent tool life from a heat-resistant grade The coated cemented carbide grade WSM20S from the Tiger·tec Silver family is formulated for extended performance when machining rostfreier Stahl and heat-resistant alloys. The combination of a wear-resistant coating and a substrate engineered for thermal stability reduces flank wear and edge breakdown. As a result, shops benefit from predictable tool life and fewer tool changes, which supports higher uptime and consistent batch quality. Stable machining through optimised chip control The MM4 chipbreaker provides controlled chip formation even under elevated cutting temperatures typical of challenging materials. Controlled chip flow reduces the risk of built-up edge and tool overload, supporting steady cutting forces and improved surface integrity. This means smoother cycles and reduced secondary operations, delivering measurable gains in cycle time and component finish. Precision geometry for reliable dimensional results With a square 90° form, a 0.4 mm corner radius and a 7° clearance angle, the insert delivers dependable edge strength and repeatable contact conditions in many turning and boring toolholders. These geometric choices support both robustness in interrupted cuts and the generation of consistent axial contact, which helps achieve reproducible dimensions and surface texture with each indexation. Practical application notes and material scope The insert is intended for difficult-to-machine alloys and, depending on the chosen geometry, for rostfreier Stahl (ISO group M) as well as superalloys and titanium (ISO group S). The grade’s balanced properties make it suitable where heat resistance and edge stability are required rather than aggressive roughing alone. For new setups, a conservative speed and feed window and progressive optimisation usually yield the best compromise between productivity and tool life. Contact Metav Werkzeuge for tailored recommendations on the Walter Tools SCGT09T304-MM4 WSM20S and to discuss optimal cutting data and holder selection; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: SCGT09T304-MM4-WSM20S-WALTER Designation: SCGT09T304-MM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Square 90° Size: 09 Thickness: T3 Tolerance class: G Chipbreaker: MM4 Series: Tiger·tec Silver Special features Grade: WSM20S – coated cemented carbide Application: Difficult-to-machine materials; depending on geometry also rostfreier Stahl Stable chip control for secure edge condition Designed for thermal and mechanical load stability FAQ Which materials is this insert suitable for? The SCGT09T304-MM4 WSM20S is specified for machining difficult-to-machine alloys and, depending on geometry, rostfreier Stahl (ISO group M) as well as heat-resistant superalloys and titanium (ISO group S). What does the MM4 chipbreaker deliver in practice? The MM4 chipbreaker promotes controlled chip formation and evacuation, reducing built-up edge and stabilising cutting forces when the insert is used under the recommended cutting conditions. How does the Tiger·tec Silver technology benefit shop performance? Tiger·tec Silver offers a wear-resistant coated substrate that improves thermal stability and tool life, helping to maintain consistent surface quality and reduce the frequency of insert changes. Is the insert suitable for interrupted cuts or heavy engagement? The square 90° shape combined with a 0.4 mm corner radius provides robust edge support for many interrupted and semi-heavy turning tasks, offering good resistance to mechanical shock. How often should the insert be indexed to maintain accuracy? Indexing frequency depends on workpiece material and cutting data; regular inspection of edge condition is recommended and the SCGT09T304-MM4 WSM20S should be indexed or replaced when wear affects dimensional control or surface finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is original, factory-new merchandise of the manufacturer.
SCGT09T304-MN2 WN10 Wendeplatten - Walter Tools
Benefit from cost-effective, reliable machining with the uncoated WN10 carbide and the MN2 chipbreaker that promote stable chip formation; the 7° clearance and 0.4 mm nose radius support consistent turning quality. Order the SCGT09T304-MN2 WN10 directly via Metav Werkzeuge or consult our technical team for application-specific advice. SCGT09T304-MN2 SCGT09T304-MN2 WN10 — Walter Tools turning indexable insert, MN2 chipbreaker, 7° clearance SCGT09T304-MN2 WN10 is a square turning insert designed for general turning tasks where consistent chip control and straightforward indexable handling are required Uncoated carbide grade WN10 MN2 chipbreaker for stable chips 7° clearance angle for secure cutting 0.4 mm nose radius for precise profiles Stable chip control for reliable machining The combination of the MN2 chipbreaker and the uncoated WN10 cemented carbide grade is engineered to promote predictable chip formation. This results in smoother machining cycles and reduced risk of irregular chip piling that can interrupt production. The chipbreaker geometry is tuned for general turning operations and supports consistent surface quality, enabling process planners to maintain stable cutting parameters and minimise rework. Geometry tuned for precision and repeatability With a 7° clearance and a 0.4 mm nose radius, the insert balances edge strength and fine surface finish. The square 90° shape provides versatile approach angles for facing and external turning, while the T3 plate thickness and tolerance class G ensure dimensional reliability across index changes. These geometric choices help to preserve tool life under typical cutting conditions and to reproduce part profiles with minimal adjustment between insert changes. Material class and application guidance The insert is supplied in an uncoated cemented carbide form under the Walter Tools series designation. The grade WN10 is part of an open series; suitability for specific workpiece materials should be verified against the product matrix. Where material compatibility is uncertain, refer to the manufacturer’s application chart or request technical advice to match cutting data and workpiece properties for optimal results. Efficient workshop handling and process benefits As an indexable solution, the insert facilitates fast tool changes and consistent setup repeatability, supporting efficient shop-floor routines. The defined nose radius and stable chip control contribute to predictable tool wear, which aids maintenance scheduling and cost calculation. Combined with Walter Tools’ production standards, the geometry and grade are aimed at delivering reproducible performance for batch production and routine turning tasks. For application-specific recommendations or to secure SCGT09T304-MN2 WN10 inserts from Metav Werkzeuge, please contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt guidance and availability Technical data Article number: SCGT09T304-MN2-WN10-WALTER Designation: SCGT09T304-MN2 WN10 Product type: Turning indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Numbers / Core technical data Clearance angle: 7° Nose radius: 0.4 mm Insert size: 09 Thickness: T3 Insert form: Square 90° Tolerance class: G Designs / Special features MN2 chipbreaker Uncoated cemented carbide (WN10) Open series designation Square 90° insert geometry FAQ What does the MN2 chipbreaker do? The MN2 chipbreaker on the SCGT09T304-MN2 WN10 insert controls chip shape and evacuation, improving stability in standard turning operations. Is WN10 a coated grade? WN10 is supplied as an uncoated cemented carbide grade; the SCGT09T304-MN2 WN10 therefore offers the cutting properties inherent to uncoated hardmetal. Which workpiece materials suit this insert? Material compatibility should be checked in the product matrix; the SCGT09T304-MN2 WN10 is intended for general turning work, but specific applications require verification against the manufacturer’s recommendations. How does the 0.4 mm nose radius affect results? A 0.4 mm nose radius provides a compromise between surface finish and edge strength, allowing finer finishes than larger radii while maintaining sufficient robustness for most turning tasks with this insert. What does tolerance class G imply for production? Tolerance class G indicates standard dimensional accuracy for the insert, helping to ensure repeatable positioning and consistent part geometry when inserts are indexed or replaced. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer. Walter Tools is a well-established provider of precision cutting tools and is recognised for delivering process-stable solutions that support reliable machining and consistent results.
SCGT09T304-MN2 WNN10 Wendeplatten - Walter Tools
Combine the coated carbide grade WNN10, precise 0.4 mm nose radius and a 7° clearance to achieve steady cutting performance and consistent surface quality; order the SCGT09T304-MN2 WNN10 insert directly via Metav Werkzeuge or consult our specialists for application support. SCGT09T304-MN2 WNN10 indexable turning insert — Walter Tools, 7° clearance, 0.4 mm nose radius The SCGT09T304-MN2 WNN10 is a square 90° indexable turning insert engineered for reliable chip control and accurate profile turning in general metalcutting operations. Coated carbide grade WNN10 7° clearance angle for reliable cutting 0.4 mm nose radius for accurate profiles Square 90° insert, T3 thickness Increase throughput with stable cutting edge life The combination of a coated carbide substrate and the WNN10 grade aims to deliver consistent wear behaviour across series production. A coated hardmetal layer reduces flank wear and improves thermal resistance, which translates into longer intervals between indexing and fewer unplanned stoppages. The integrated MN2 chipbreaker promotes controllable chip formation, reducing the risk of long swarf and improving machine uptime. For production planners, this means improved productivity and predictable tool-change cycles. Clear guidance on applications and material suitability Material compatibility should be validated against the manufacturer’s product matrix; the insert’s grade designation and coating determine its optimal uses. Where cutting data is not explicit, the insert is typically suited for a range of turning tasks requiring a balance of wear resistance and toughness. The prescribed approach is to consult the technical matrix to match feed and speed settings with component material, ensuring both surface finish and repeatability in batch production. This helps avoid overloading the cutting edge and secures consistent part quality. Geometry that supports precise profiling and reliable clamping The square 90° form combined with a 0.4 mm nose radius enables accurate profile generation while maintaining edge strength for small radii work. The 7° clearance reduces rubbing on the flank face, lowering heat build-up and minimising vibration in standard setups. A T3 thickness and the defined tolerance class support stable clamping and easy indexing in common toolholders, which simplifies tool management on the shop floor and contributes to process stability. For application-specific advice or to discuss insert selection for a concrete machining task, contact Metav Werkzeuge — our consultants provide practical recommendations and can help integrate Walter Tools inserts into existing production processes. Technical data SKU: SCGT09T304-MN2-WNN10-WALTER Designation: SCGT09T304-MN2 WNN10 Product type: indexable turning insert Manufacturer: Walter Tools Core data Clearance angle: 7° Nose radius: 0.4 mm Insert size: 09 Thickness: T3 Corner angle: 90° Tolerance class: G Special features Coated carbide grade WNN10 Chipbreaker MN2 Square 90° shape Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What materials is this insert suitable for? Material suitability depends on the product matrix; consult the technical matrix to confirm whether the SCGT09T304-MN2 WNN10 is appropriate for a specific workpiece material. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on the SCGT09T304-MN2 insert supports short, controlled chips, which improves chip evacuation and reduces the likelihood of swarf-related interruptions during turning. What benefits does the 0.4 mm nose radius provide? A 0.4 mm nose radius balances profile accuracy and edge strength, enabling fine detail on turned components while preserving tool life under typical feed rates. Is the WNN10 grade a coated or uncoated carbide? WNN10 is a coated carbide grade; the coating enhances wear resistance and thermal stability for repetitive turning tasks. Can this insert be used in standard toolholders? Yes, the square 90° form and T3 thickness are compatible with common indexable turning toolholders designed for this insert size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is a leading manufacturer of precision tools and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
SCGT09T304-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Benefit from the proven combination of the Tiger‑tec Silver series and the WSM01 grade for secure chip control and extended tool life when machining stainless steels and heat‑resistant alloys. Order the SCGT09T304‑MN2 WSM01 insert directly via Metav Werkzeuge or request tailored application advice from our consultants. SCGT09T304‑MN2 WSM01 indexable turning insert, Tiger‑tec Silver – for stainless steels and superalloys by Walter Tools The SCGT09T304‑MN2 WSM01 is a square 90° indexable insert engineered for demanding turning operations in stainless steels (M) and heat‑resistant superalloys / titanium (S), combining a robust chipbreaker with a low‑relief geometry for stable cutting. Tiger‑tec Silver coating for long edge life WSM01 grade for tough, heat‑resistant materials Square 90° form for shoulder and face turning MN2 chipbreaker for controlled chip formation High‑performance grade optimised for tough materials The WSM01 grade in the Tiger‑tec Silver series is a coated carbide designed for machining stainless steels and heat‑resistant superalloys, where heat and work‑hardening demand a resilient cutting edge. The chemical and mechanical bonding of the coating improves thermal stability and abrasion resistance, which translates into longer tool life and fewer insert changes. For production environments, this means reduced machine downtime and more consistent batch results, as the grade helps maintain a stable cutting edge under elevated temperatures and interrupted cuts. Precision geometry that supports consistent surface finish The insert’s square 90° shape paired with a 0.4 mm corner radius and a 7° clearance angle yields a controlled cutting geometry that minimises chatter and rubbing on shoulder faces. A modest corner radius like 0.4 mm provides a good balance between strength and the ability to produce repeatable surface finishes, while the 7° relief reduces flank contact and heat build‑up. These geometric choices help achieve predictable part tolerances and lower scrap rates in series production, particularly when finishing operations demand consistent results. Reliable chip control and practical clamping for efficient turning Equipped with the MN2 chipbreaker, this insert promotes short, segmented chips that evacuate reliably from the cutting zone during turning of ductile stainless steels and difficult superalloys. The chip control system reduces the risk of entanglement and tool damage, improving operator safety and cycle time. The insert thickness T3 and standard 09 size designation make it compatible with many common toolholders, offering straightforward integration into existing tooling systems and helping maintain a productive machining process. For application support or cutting‑data recommendations based on the Tiger‑tec Silver WSM01 grade, please contact Metav Werkzeuge directly by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical advisors are available to recommend optimal feeds, speeds and toolholder pairings Technical data Article number: SCGT09T304-MN2-WSM01-WALTER Name: SCGT09T304‑MN2 WSM01 Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Insert shape: Square 90° Relief angle: 7° Corner radius: 0.4 mm Size designation: 09 Thickness: T3 Tolerance class: G Special features Grade: WSM01 (coated carbide) Chipbreaker: MN2 Material suitability: stainless steels (M), heat‑resistant superalloys and titanium (S) Application focus: turning operations requiring stable edge life and chip control FAQ What materials is this insert best suited for? The SCGT09T304‑MN2 WSM01 is optimised for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), providing thermal and edge stability for these demanding materials. How does the MN2 chipbreaker benefit production? The MN2 chipbreaker on this Walter Tools insert promotes short, manageable chips and improves evacuation, which enhances process reliability and reduces the risk of chip recontact or tool damage. What finishing quality can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between strength and surface finish, enabling consistent tolerances and good face quality on shoulders and finishing passes when the correct cutting data is applied. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
SCGT09T304-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the universal WPP20G grade for efficient steel machining; the square 90° geometry with 0.4 mm corner radius and 7° relief ensures stable cutting and predictable chip control. Order the SCGT09T304-MP4 WPP20G insert via Metav Werkzeuge or consult our technical advisors for application support. SCGT09T304-MP4 WPP20G — square 90° indexable insert for turning and boring (Walter Tools) The SCGT09T304-MP4 WPP20G is a square 90° indexable insert engineered for productive machining of steel, combining the Tiger·tec Gold coating technology with a universal WPP20G grade and an MP4 chipbreaker for controlled chip formation. Tiger·tec Gold coated carbide grade WPP20G Square 90° insert for robust engagement 0.4 mm corner radius for stable cutting 7° relief for controlled chip formation Improve cycle times through a wear-resistant coating and universal grade The combination of Tiger·tec Gold coating and the WPP20G carbide grade provides a clear productivity advantage when machining steels. The coating improves heat resistance and reduces flank wear, while the grade balances hardness and toughness for extended tool life under typical steel cutting conditions. Together with the MP4 chipbreaker, this results in more consistent chip evacuation and fewer interruptions, which supports faster cycle times and reduced tool-change frequency. The insert’s specification aligns with ISO P material groups, making it suitable for a wide range of unalloyed and alloyed steels. Geometry designed for process stability and reproducible surface quality The square 90° form and 0.4 mm corner radius are configured to deliver stable cutting engagement and predictable force distribution at the cutting edge. The 7° relief minimises rubbing and helps maintain sharp cutting action, while the T3 thickness contributes to insert stiffness during heavier cuts. These geometric choices reduce vibration and support repeatable dimensional results, which is particularly valuable in batch production or when tight tolerances are required. The result is improved surface finish and fewer rejects without sacrificing productivity. Practical application: predictable chip control and shop-floor reliability With the MP4 chipbreaker, the insert offers reliable chip formation for turning and boring operations in steel, reducing the risk of long, tangled chips and helping to maintain operator safety and machining continuity. The insert’s robust construction and coating make it well suited to general-purpose turning where a balance of economy and performance is required. For workshops seeking a straightforward upgrade to process reliability, this insert delivers longer intervals between indexings and consistent results across typical steel applications; technical advice is available from Metav Werkzeuge if process-specific optimisation is needed. Contact Metav Werkzeuge for tailored machining recommendations and availability of the Walter Tools SCGT09T304-MP4 WPP20G insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCGT09T304-MP4-WPP20G-WALTER Designation: SCGT09T304-MP4 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert shape: Square 90° Corner radius: 0.4 mm Relief / clearance angle: 7° Chipbreaker: MP4 Thickness: T3 Size designation: 09 Tolerance class: G Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: Steel (ISO P) Applications: Turning and drilling/reaming indexable insert use Balanced wear resistance and toughness for general steel machining FAQ What materials is this insert designed for? The SCGT09T304-MP4 WPP20G insert is designed primarily for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip characteristics typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold reduces flank wear and increases thermal resistance; in the SCGT09T304-MP4 WPP20G this contributes to longer tool life and more consistent cutting behaviour in steel applications. Which operations suit this insert best? This indexable insert is suitable for turning and related boring/drilling operations where a square 90° geometry and reliable chip control from the MP4 breaker are advantageous. What chip behaviour can be expected with the MP4 chipbreaker? The MP4 chipbreaker promotes predictable, controllable chips in steel machining; combined with the 0.4 mm corner radius and 7° relief, the SCGT09T304-MP4 WPP20G delivers safer chip handling and reduced risk of chip-related interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
SCGT09T308-FM2 WSM20S FM2 Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating, the WSM20S carbide grade and the FM2 chipbreaker delivers stable chip formation and extended edge life for demanding applications; order genuine inserts directly via Metav Werkzeuge or ask the consultants for tool-matching advice. SCGT09T308-FM2 WSM20S – turning indexable insert (Tiger·tec Silver) by Walter Tools The SCGT09T308-FM2 WSM20S is a square 90° turning insert designed for heavy-duty machining of stainless steels and heat-resistant superalloys and titanium. Tiger·tec Silver coating technology WSM20S grade for stainless and superalloys FM2 chipbreaker for stable chip control 0.8 mm corner radius, square 90° High performance where heat and toughness meet The insert combines a coated carbide substrate with the Tiger·tec Silver technology, engineered for secure cutting in materials that generate heat and work-harden, such as stainless steels and heat-resistant superalloys. The WSM20S grade promotes a stable cutting edge and consistent wear behaviour, which translates into predictable tool life and fewer interruptions on the shop floor. This results in a more reliable process window and supports higher productivity in serial production and batch machining environments. Geometry engineered for secure cutting and surface quality A compact square 90° form with a 0.8 mm corner radius and a 7° clearance angle provides a robust cutting edge that resists chipping while maintaining good surface finish. The FM2 chipbreaker is designed to encourage short, controllable chips under moderate to heavy cutting depths, reducing the risk of built-up edge and improving swarf evacuation. Together, these geometry choices reduce the likelihood of unplanned tool changes and help maintain consistent part tolerances, particularly when machining sticky or gummy grades. Practical advantages for workshop efficiency The insert’s specification—thin-profile T3 thickness and tolerance class G—makes it compatible with common toolholder systems while offering the rigidity required for interrupted or heavy cuts. The coated surface reduces friction and improves thermal stability, allowing for stable cutting parameters in challenging materials. In production terms, this means fewer set-up iterations and a smoother transition from prototype to series manufacture. For shops seeking reproducibility and economy, the insert supports repeatable performance and predictable maintenance scheduling. Contact Metav Werkzeuge to discuss tool matching, availability and original Walter Tools inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCGT09T308-FM2-WSM20S-WALTER Designation: SCGT09T308-FM2 WSM20S Product type: Turning indexable insert Grade: WSM20S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Clearance angle: 7° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Coating technology: Tiger·tec Silver Coated carbide grade Chipbreaker: FM2 Suitable for ISO groups: M (stainless steels), S (superalloys and titanium) Application focus: heavy-duty and difficult-to-machine materials FAQ What materials is this insert designed for? The SCGT09T308-FM2 WSM20S insert from Walter Tools is optimised for stainless steels (ISO group M) and heat-resistant superalloys and titanium (ISO group S). How does the FM2 chipbreaker influence cutting performance? The FM2 chipbreaker on the SCGT09T308-FM2 promotes short, controlled chips and aids chip evacuation, which lowers the risk of built-up edge and improves process stability when machining tougher materials. What does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal resistance and lubricity on the cutting edge, helping the WSM20S grade maintain a stable edge life under elevated temperatures and adhesive wear conditions. Is the 0.8 mm corner radius suitable for finishing? A 0.8 mm corner radius balances edge strength and surface finish; it is robust enough for heavier cuts while still capable of producing acceptable surface quality in semi-finish to finish operations. Which toolholders are compatible with this insert format? The square 90° form and size 09 of this turning insert are compatible with standard indexable insert toolholders designed for SCGT-style inserts; check clamping and seat geometry for precise fit. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand name: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
SCGT09T308-FN2 WNN10 Wendeplatten - Walter Tools
Benefit from precise geometry and predictable chip control: the combination of the WNN10 coated carbide grade, the FN2 chipbreaker and the square 90° form enables stable cutting and consistent tool life; order the SCGT09T308-FN2 WNN10 insert through Metav Werkzeuge or contact the consultants for selection support. SCGT09T308-FN2 WNN10 – Square 90° turning insert with FN2 chipbreaker | Walter Tools The SCGT09T308-FN2 WNN10 is a square indexable turning insert designed for stable cutting performance and controlled chip formation in general turning operations. Square 90° geometry for stable cutting WNN10 coated carbide grade for consistent wear resistance FN2 chipbreaker for reliable chip control 7° clearance with 0.8 mm corner radius Precise geometry for consistent process stability The square format with a 90° cutting edge and 7° clearance provides a stiff, repeatable cutting geometry that supports tight tolerances and predictable tool behaviour. The insert’s 0.8 mm corner radius reduces edge stress while maintaining dimensional control on shoulders and grooves. As a result, machining setups benefit from reduced vibration and improved surface integrity, which helps to secure consistent part quality in serial production. Coated carbide grade and chip control that support productivity The WNN10 coating on the substrate supplies wear resistance suited to a broad range of turning tasks; combined with the FN2 chipbreaker, this insert promotes effective chip control across varying cut conditions. The controlled chips reduce the risk of rework and machine downtime, while the coated substrate contributes to a predictable tool life. For shops seeking cost-effective productivity, the insert’s balanced performance helps to minimise changeover frequency and maintain steady cycle times. Integration into tool systems and selection guidance The insert’s designation and form match common clamping systems for square turning inserts, enabling straightforward integration into existing toolholders. Selection should consider the workpiece material and cutting parameters; as indicated by the product matrix, the SCGT09T308-FN2 WNN10 is a coated carbide grade intended for general-purpose turning where the FN2 chipbreaker’s characteristics align with the desired chip form. For bespoke applications or unfamiliar materials, consult the manufacturer’s matrix to confirm optimal grade and geometry pairing. Choose Walter Tools inserts via Metav Werkzeuge for reliable turning results; contact Metav Werkzeuge for tailored selection advice and application support. Technical data SKU: SCGT09T308-FN2-WNN10-WALTER Product: SCGT09T308-FN2 WNN10 Type: Indexable turning insert (square) Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: G Special features Grade: WNN10 (coated carbide) Geometry: Square 90° Chipbreaker: FN2 Designation: SCGT09T308-FN2 Form series: Walter Schneidstoffsorte - Serie offen FAQ What clamping system fits this insert? The SCGT09T308-FN2 WNN10 indexable insert is compatible with standard toolholders designed for square 90° inserts; verify holder model and clamping seat dimensions against the insert designation SCGT09T308-FN2-WNN10-WALTER. Which materials is the insert suited for? Material suitability should be checked in the manufacturer’s product matrix; the WNN10 coated carbide grade is formulated for general turning tasks, and the FN2 chipbreaker aims to deliver reliable chip form across typical ferrous machining operations. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker creates short, controllable chips under appropriate cutting parameters, improving handling and reducing the risk of entanglement—this behaviour is a key benefit of the SCGT09T308-FN2 WNN10 insert. Can the insert be reground or reused? Regrinding depends on the insert design and workshop capabilities; consult the manufacturer’s guidelines for the SCGT09T308-FN2 WNN10 to determine reconditioning options and safe limits. Is this insert suitable for high-speed turning? The coated carbide grade WNN10 supports stable performance, but suitability for high-speed turning must be validated against the specific cut conditions and the manufacturer’s recommendations. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
SCGT09T308-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Combine high wear resistance and controlled chip formation with the Tiger‑tec Silver grade WKK20S and MK4 chipbreaker for efficient cast‑iron turning; order the inserts directly via Metav Werkzeuge or contact our consultants for machining guidance. SCGT09T308-MK4 WKK20S — square 90° indexable insert with MK4 chipbreaker for cast iron, Walter Tools The SCGT09T308-MK4 WKK20S is a square, 90° indexable insert engineered for productive turning and boring of cast iron, offering a MK4 chipbreaker and a 7° relief angle to support stable cutting conditions. Tiger‑tec Silver coated carbide grade WKK20S Optimised chip control with MK4 chipbreaker 7° relief angle for stable cutting Suitable for cast iron machining Higher throughput for cast‑iron production The combination of Tiger‑tec Silver technology and the WKK20S grade results in a coated carbide that balances abrasive wear resistance with toughness, which is critical when machining cast iron. The insert geometry and 7° free angle deliver consistent contact conditions at the cutting edge, reducing vibration and enabling higher, more reliable metal removal rates. Designed for repetitive, industrial use, this specification helps maintain cycle times and contributes to predictable tool life in series production. Precise chip control to reduce downtime The MK4 chipbreaker is engineered to produce short, manageable chips when cutting grey and nodular cast irons, improving swarf evacuation and protecting the workpiece surface. As a coated carbide insert, the plate benefits from the series’ optimized coating stack that resists abrasive particle attack and supports repeatable edge stability. These characteristics translate into fewer interruptions for chip clearing and less frequent edge changes, supporting continuous machining and a lower total cost of ownership. Reliable geometry and process security With a square 90° form, T3 plate thickness and a 0.8 mm corner radius, the insert provides robustness where intermittent engagement or interrupted cuts may occur. The tolerance class G ensures consistent fit and repeatable positioning in toolholders, while the designation SCGT09T308-MK4 WKK20S identifies a solution tailored for demanding cast‑iron applications. The product’s build focuses on process security and surface integrity, making it suitable for shops that prioritise stable, predictable results. For tailored application advice and to secure the appropriate Walter Tools SCGT09T308-MK4 WKK20S inserts for high‑volume cast‑iron machining, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tooling and supply options. Technical data Article number: SCGT09T308-MK4-WKK20S-WALTER Designation: SCGT09T308-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Plate form: Quadrat 90° Facts Free angle: 7° Corner radius: 0.8 mm Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Coated carbide grade WKK20S Chipbreaker MK4 Suitable for cast iron Application: turning / boring insert Sorten- und Serienbeschreibung: Tiger·tec Silver FAQ What materials is this insert suitable for? The SCGT09T308-MK4 WKK20S from Walter Tools is formulated primarily for cast iron machining and is optimised for abrasive wear and short, breaking chips typical of that material. What does WKK20S and Tiger‑tec Silver mean for performance? WKK20S denotes a Walter coated carbide grade within the Tiger‑tec Silver family; the combination provides enhanced wear resistance and toughness suited to productive cast‑iron cutting. Which chipbreaker is fitted and what is its effect? The insert features a MK4 chipbreaker designed to produce short, controlled chips in cast‑iron turning, improving chip evacuation and surface quality. How does the 7° relief angle influence cutting? A 7° free angle reduces rubbing and helps maintain a stable cutting edge angle, which supports consistent chip formation and protects the insert edge during interrupted cuts. Is the insert suitable for interrupted cuts and heavy engagement? The square 90° geometry, 0.8 mm corner radius and T3 thickness give the insert the mechanical stability required for intermittent engagement and applications demanding robust edge strength. Walter AG (brand: Walter Tools), Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation; the offered article is an original, factory‑new product of the manufacturer.
SCGT09T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, robust edge stability and optimised chip control for efficient turning of difficult-to-machine alloys. For procurement or technical clarification, request availability or application advice from Metav Werkzeuge. SCGT09T308-MM4 WSM01 turning insert — Tiger‑tec Silver, chipbreaker MM4 by Walter Tools The SCGT09T308-MM4 WSM01 is a square 90° turning insert engineered for heavy-duty machining of stainless steel and heat‑resistant superalloys, offering reliable edge life and reproducible performance. Tiger‑tec Silver coating for wear resistance MM4 chipbreaker for secure chip control 7° relief angle for robust edge stability High cutting performance for demanding materials The insert is designed around the Tiger‑tec Silver concept to deliver consistent wear resistance and stable cutting-edge behaviour when machining tough alloys. Its coated carbide construction and the WSM01 grade combine to reduce edge breakdown and support predictable tool life, which translates into fewer tool changes and improved process efficiency. By focusing on measurable process gains — such as longer time between indexings and stable surface finish — the insert supports productive machining sequences in industrial turning operations. Secure chip control that stabilises the process With the MM4 chipbreaker, the geometry channels chips away from the cutting zone to avoid entanglement and interruption. This chip control enhances coolant access and reduces the risk of built‑up edge formation during interrupted cuts or when working with gummy materials. The feature particularly benefits setups where machine uptime and repeatability are critical, enabling operators to maintain steady feeds and speeds while achieving reproducible results. Edge geometry tuned for strength and versatility A 7° relief angle combined with a corner radius of 0.8 mm gives a robust cutting edge that tolerates higher mechanical loads and thermal stresses. The square 90° plate shape is suitable for general‑purpose turning where a stable cutting seat is required. These geometry choices help deliver a balance between strength and finishing capability, making the insert appropriate for roughing and semi‑finishing operations on stainless steel and similarly challenging materials. Application range and material compatibility The grade and geometry support machining of ISO material groups M and S — specifically stainless steel (M) and heat‑resistant superalloys/titanium (S). The combination of high process reliability and optimised chip formation makes the insert a practical choice when consistent performance is required under elevated cutting temperatures and poor thermal conductivity conditions. Operators benefit from a tool that reduces variability in cycle times and helps maintain quality across batches. Practical handling and workshop integration The insert follows standard ISO indexing conventions and integrates with established toolholder systems for quick insert changes and minimal downtime. Its predictable behaviour reduces setup iteration and simplifies grade selection for job planning. For procurement, the standardised designation enables streamlined inventory management and traceability across production lines. For application advice, toolholder compatibility and immediate availability of Walter Tools SCGT09T308-MM4 WSM01, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SCGT09T308-MM4-WSM01-WALTER ISO designation: SCGT09T308-MM4 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Chipbreaker: MM4 Execution: T Material code: S / M Application: stainless steel and superalloys (ISO groups M and S) WPL designation without grade: SCGT09T308-MM4 FAQ Which materials is this insert suitable for? The SCGT09T308-MM4 WSM01 insert is suitable for stainless steel and heat‑resistant superalloys/titanium, corresponding to ISO material groups M and S. What benefit does the MM4 chipbreaker provide? The MM4 chipbreaker ensures secure chip control and improved coolant access, reducing the chance of built‑up edge and interruptions during turning operations. What are the key edge geometry specifications? The insert features a 7° relief angle and a corner radius of 0.8 mm, providing a balance of edge strength and finishing performance. Is WSM01 a coated grade and what does that mean? WSM01 is a coated carbide grade within the Tiger‑tec Silver series, designed for enhanced wear resistance and stable cutting‑edge behaviour under thermal and mechanical stress. For which machining tasks is this insert primarily intended? This insert is intended for heavy‑duty turning and semi‑finishing of difficult‑to‑machine alloys where process stability and predictable tool life are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original factory‑new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com