SCGT09T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the WSM20S cutting grade together with the Tiger·tec Silver coating to achieve secure chip control and extended tool life in demanding turning tasks. The square 90° geometry with a 0.8 mm corner radius and 7° clearance provides stable cutting performance in stainless steel and heat‑resistant superalloys. Order via Metav Werkzeuge or ask our consultants for application-specific recommendations. SCGT09T308-MM4 WSM20S – Square 90° turning insert, Tiger·tec Silver (Walter Tools) The SCGT09T308-MM4 WSM20S is a square 90° indexable insert optimised for heavy-duty turning of stainless steel and high-temperature alloys in industrial machining environments. Tiger·tec Silver coating performance WSM20S grade for stainless steel & superalloys Square 90° geometry for stable indexing 7° clearance with 0.8 mm corner radius Consistent productivity for difficult-to-cut materials The combination of the WSM20S coated cemented‑carbide grade and the Tiger·tec Silver technology is designed to improve process stability when machining materials that tend to work‑harden or produce troublesome chips. The dedicated MM4 chipbreaker supports repeatable chip formation, reducing the risk of built‑up edge and unplanned interruptions. For production environments where cycle time and tool life directly affect output, this insert offers a measurable improvement in productivity and fewer tool changes. Improved part quality and reliable cutting edge life The square 90° form, paired with a 0.8 mm corner radius and 7° clearance, balances edge strength and surface finish. A larger corner radius increases edge robustness for interrupted cuts and roughing passes, while the clearance angle helps to avoid rubbing and heat build‑up. This results in more consistent dimensional accuracy and surface quality on turned components. The insert thickness designation T3 ensures adequate insert support in modern toolholders, contributing to predictable performance. Practical application guidance and economic benefit Designed for ISO material groups M and S, the insert is suitable for stainless steel (stainless steels) and heat‑resistant superalloys including titanium and nickel‑based materials. Using an indexable insert of this specification reduces tooling downtime because several cutting edges are available per insert, which lowers overall machining cost per part. For process optimisation, pairing this insert with appropriate cutting data and coolant strategy enhances its wear resistance and extends service intervals. Contact Metav Werkzeuge for tailored cutting data and supply of Walter Tools inserts; our technical advisors are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to discuss the best setup for specific applications. Technical Data SKU: SCGT09T308-MM4-WSM20S-WALTER Designation: SCGT09T308-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Square 90° Size designation: 09 Tolerance class: G Special features Grade: WSM20S Chipbreaker: MM4 Thickness: T3 Execution: T Material code: S / M Suitable for stainless steel and high‑temperature superalloys FAQ What materials is this insert suitable for? This Walter Tools turning insert is designed for stainless steel and heat‑resistant superalloys; the WSM20S grade targets toughness and heat resistance in these groups. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the SCGT09T308-MM4 promotes controlled chip formation, improving machining stability and reducing the risk of built‑up edge on challenging materials. What does the 0.8 mm corner radius mean for part finish? A 0.8 mm corner radius increases edge strength for roughing and interrupted cuts while maintaining a good surface finish when combined with appropriate feeds and speeds. Is the insert compatible with standard square insert holders? The square 90° geometry and T3 thickness of this indexable insert are compatible with standard toolholders designed for this insert shape and size; ensure correct clamping and seat contact. How many cutting edges are available per insert? The SCGT09T308-MM4 is a square indexable insert; each index provides a fresh cutting edge, allowing multiple repositions before replacement and reducing tooling costs. Manufacturer: Walter Tools; Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer. The Walter Tools brand denotes established tool quality and is noted here for identification purposes.
SCGT09T308-MN2 WN10 MN2 Wendeplatten - Walter Tools
Take advantage of a robust square 90° geometry, a 0.8 mm corner radius and the MN2 chipbreaker to achieve consistent chip control and predictable tool life in general turning operations; order the insert directly via Metav Werkzeuge or consult the team for application-specific guidance. SCGT09T308-MN2 WN10 – Indexable turning insert, uncoated carbide, 7° relief (Walter Tools) The SCGT09T308-MN2 WN10 is a square 90° indexable turning insert designed for general-purpose turning, offering stable cutting geometry and controlled chip formation with the MN2 chipbreaker Square 90° insert shape for robust turning 7° relief angle for stable cutting geometry 0.8 mm corner radius for smooth profiles Uncoated carbide grade WN10 for general machining Reliable chip control for steady production The square insert geometry combined with the MN2 chipbreaker provides consistent chip formation, which reduces interruptions and eases downstream handling. The MN2 design guides chips away from the cutting edge, so operations run with fewer stoppages and improved reproducibility. For production environments where process stability matters, this combination reduces the need for unscheduled intervention and supports efficient cycle times. Predictable edge behaviour and surface quality With a 0.8 mm corner radius and a 7° relief, the insert achieves a balance between edge strength and surface finish. A larger corner radius distributes cutting forces over a greater area, enhancing the stable cutting edge and reducing notch wear in interrupted cuts. As a result, the insert helps maintain consistent component geometry and a reliable surface finish during medium-duty turning tasks. Material adaptability and straightforward selection The insert is supplied in WN10, an uncoated carbide grade intended for a variety of general machining tasks; the grade is suitable where an uncoated carbide solution is preferred for predictable wear characteristics. Because the grade and series are catalogue-dependent, checking the product matrix for specific workpiece materials ensures optimal performance; this approach supports correct selection and reduces the risk of premature wear or suboptimal cycle times. Operational advantages for fleet management Using standardised geometry—square 90° form, T3 thickness and the specified tolerance class—simplifies toolholder setup and inventory management. The repeatable dimensions and robust design contribute to reliable tool life and easier replacement routines, which can lower total machining costs across batches. For shops seeking consistent throughput, adopting standard inserts like this one streamlines logistics and operator training. For dependable turning results with Walter Tools' uncoated WN10 grade, contact Metav Werkzeuge for tailored advice and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SCGT09T308-MN2-WN10-WALTER Label: Drehwendeschneidplatte SCGT09T308-MN2 WN10 Walter Tools Product type: Drehwendeschneidplatte Brand: Walter Tools Execution: T Facts Relief angle: 7° Corner radius: 0.8 mm Insert shape: Quadrate 90° Insert size: 09 Plate thickness: T3 Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig ISO designation: SCGT09T308-MN2 WN10 UID: SCGT09T308-MN2-WN10-WALTER FAQ What applications suit this indexable insert best? The SCGT09T308-MN2 WN10 is intended for general turning tasks where a square 90° geometry and controlled chip formation with the MN2 chipbreaker are advantageous. Is this insert coated or uncoated and what does that mean for machining? This insert uses the uncoated WN10 carbide grade; uncoated carbide tends to offer predictable wear behaviour and can be preferable for applications where coating effects are not required. How does the 0.8 mm corner radius affect component finish? A 0.8 mm corner radius helps deliver smoother profiles and distributes cutting forces, contributing to enhanced surface consistency and reduced edge chipping in medium-duty turning. Can the insert handle interrupted cuts or tough contact conditions? The square 90° geometry combined with the 7° relief and the robust corner radius provides improved edge strength, making the insert suitable for moderate interrupted cuts when used within appropriate machining parameters. Which chipbreaker and insert dimensions should be considered when choosing a toolholder? Select a toolholder compatible with a square 90° insert of size 09 and T3 thickness, and account for the MN2 chipbreaker geometry to ensure correct chip flow and secure seating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SCGT09T308-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Efficient turning through a combination of the coated carbide grade WNN10, the MN2 chipbreaker and a precise 0.8 mm corner radius ensures stable chip formation and reliable edge life; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SCGT09T308-MN2 WNN10 turning insert — square 90°, MN2 chipbreaker, Walter Tools The SCGT09T308-MN2 WNN10 is a square, coated carbide turning insert for general turning and facing tasks, designed to deliver predictable chip control and consistent edge strength in production environments. Coated carbide grade WNN10 MN2 chipbreaker for consistent chips Square 90° geometry for facing and turning Corner radius 0.8 mm for robust cutting edge Increased throughput through controlled chip formation The design centres on efficient material removal: the MN2 chipbreaker produces small, manageable chips that reduce rework and improve cycle times. Combined with the coated carbide grade identified as WNN10, the insert offers wear resistance suited to serial machining. This results in fewer interruptions for tool changes and a steadier production flow, supporting higher productivity in turning operations. Stable tool life from robust geometry and relief A square 90° insert geometry with a 0.8 mm corner radius and a 7° relief angle delivers a balance between edge strength and accurate profile control. The slightly positive relief reduces cutting forces while the corner radius supports edge integrity during interrupted cuts, giving repeatable performance across batches. These geometric choices help maintain dimensional accuracy and extend service intervals for tooling systems. Selection guidance and compatibility notes The grade WNN10 is a coated cemented carbide; suitability for specific workpiece materials should be verified against the manufacturer’s application matrix. The item is specified as catalogue-dependent for base material information, so verify the exact material version when planning an operation. For specialised materials or alternative chip control needs, consider matching the chipbreaker and insert size to the lathe capacity and the intended feed and depth of cut. For application advice or availability of the Walter Tools SCGT09T308-MN2 WNN10, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and immediate guidance. Technical data SKU: SCGT09T308-MN2-WNN10-WALTER ISO designation: SCGT09T308-MN2 WNN10 Designation (without grade): SCGT09T308-MN2 Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.8 mm Insert shape: Square 90° Insert size: 09 Thickness: T3 Tolerance class: G Features Chipbreaker: MN2 Coated cemented carbide grade: WNN10 Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig Designation of execution: T FAQ What materials is this insert suited for? The SCGT09T308-MN2 WNN10 insert uses a coated cemented carbide grade; suitability for specific materials should be checked in Walter Tools’ application matrix prior to use. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on this Walter Tools insert promotes consistent chip control, lowering the risk of entanglement and improving handling during continuous turning operations. Can this insert be used for facing and general turning? Yes, the square 90° geometry of the SCGT09T308-MN2 WNN10 makes it suitable for both facing and general turning where a robust cutting edge is required. What cutting edge strength does the 0.8 mm radius provide? A corner radius of 0.8 mm balances edge strength and profile accuracy, offering improved tool life on interrupted cuts and steady dimensional results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCGT09T308-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Take advantage of a robust cutting solution that combines the WSM01 coated-carbide grade with the Tiger‑tec Silver series for reliable machining of stainless steels and heat-resistant alloys. The optimised MN2 chipbreaker, 7° clearance and 0.8 mm corner radius deliver consistent chip control and stable cutting-edge behaviour. Order or request application advice via Metav Werkzeuge for smooth integration into production. SCGT09T308-MN2 WSM01 indexable turning insert — Square 90°, 0.8 mm radius by Walter Tools The SCGT09T308-MN2 WSM01 is an indexable turning insert designed for demanding turning tasks, especially on stainless steels and heat-resistant superalloys, offering reliable chip control and extended edge life. Tiger‑tec Silver series, WSM01 grade Optimised MN2 chipbreaker for stable chips Square 90° form with 0.8 mm corner radius 7° clearance and T3 plate thickness Reliable machining on difficult-to-cut materials The combination of the WSM01 cutting grade and the Tiger‑tec Silver series provides a high level of process security when machining tough materials. Coated carbide technology supports stable chip formation, reducing the risk of built-up edge and thermal softening during sustained cuts. For production environments handling rostfreiem Stahl and hot-work alloys, the insert’s geometry and grade work together to keep machining consistent and predictable, which reduces unplanned tool changes and improves component throughput. Predictable chip control and longer tool life The MN2 chipbreaker is optimised for secure, continuous chip separation in sticky or work-hardening materials. By shaping the chip flow and controlling its segmentation, the chipbreaker reduces the chance of entanglement and improves surface finish. This in turn contributes to longer tool life and fewer interruptions on the shop floor. The coated-carbide chemistry of the grade supports a durable cutting edge, balancing wear resistance with toughness for repeated performance across medium- to heavy-duty turning tasks. Geometry engineered for strength and surface quality A square 90° plate form with a 0.8 mm corner radius offers enhanced edge strength for general turning operations while enabling acceptable surface finishes on radiused and flat features. The 7° clearance angle reduces flank contact and thermal loading, helping to avoid rubbing and minimise chatter. With a T3 plate thickness, the insert provides mechanical stability in a wide range of toolholder styles and lathe setups, simplifying clamping and set-up procedures for production-focused environments. Practical suitability and industrial benefits Designed with ISO groups M and S in mind, the insert is suitable for stainless steel and heat-resistant superalloys, including many aerospace and energy-sector alloys where thermal resistance and edge integrity are critical. The robust edge geometry and coating synergy mean fewer tool changes, consistent surface quality and improved process reliability. For workshops aiming to increase uptime and reproducibility, this type of insert supports leaner production cycles and measurable efficiency gains. For application-specific recommendations and supply of Walter Tools inserts, contact Metav Werkzeuge for tailored advice and rapid ordering: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCGT09T308-MN2-WSM01-WALTER Designation: SCGT09T308-MN2 WSM01 Manufacturer: Walter Tools Product type: indexable turning insert Specifications Clearance angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Features & suitability Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MN2 Material suitability: stainless steel (M) and superalloys/titanium (S) Style: SCGT indexable turning plate Typical application: turning of difficult-to-cut materials FAQ What materials is this insert recommended for? The SCGT09T308-MN2 WSM01 insert is recommended primarily for stainless steel and heat-resistant superalloys (ISO groups M and S), where its grade and chipbreaker provide reliable performance. How does the MN2 chipbreaker improve machining? The MN2 chipbreaker shapes and segments chips for controlled evacuation, which reduces entanglement, improves surface finish and contributes to extended insert life in demanding cuts. Is the insert compatible with standard SCGT toolholders? Yes, the SCGT09T308-MN2 format conforms to the SCGT form and is compatible with standard toolholders designed for SCGT-style square 90° inserts. What benefit does the 0.8 mm corner radius offer? A 0.8 mm corner radius balances edge strength and finish capability, providing robustness for heavier cuts while still achieving acceptable surface quality on turned features. Does the Tiger‑tec Silver series include a coating? Tiger‑tec Silver denotes a coated-carbide solution; combined with the WSM01 grade, it enhances wear resistance and supports thermal stability at the cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
SCGT09T308-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, an MP4 chipbreaker and a 7° relief angle for secure, efficient machining of Stahl; order the SCGT09T308-MP4 WPP20G insert directly via Metav Werkzeuge or consult Metav Werkzeuge' specialists for application support. SCGT09T308-MP4 WPP20G — Square 90° turning and boring indexable insert, Tiger·tec Gold (Walter Tools) A SCGT09T308-MP4 WPP20G turning and boring insert engineered for reliable performance in Stahl machining, optimised for stable chip control and consistent surface quality Tiger·tec Gold coated for long tool life Optimised for Stahl machining (ISO P) 7° relief angle for reliable cutting control 0.8 mm corner radius for stable finishing High productivity through optimised coating and grade The Tiger·tec Gold coating and the WPP20G grade combine to deliver high productivity and predictable tool life when machining Stahl. The MP4 chipbreaker is designed to form short, controllable chips under the typical heat and strain of turning operations, reducing downtime and enhancing process stability. For production environments seeking repeatable cycle times, this insert supports consistent cutting behaviour and reduced flank wear, translating directly into lower per‑part machining costs and fewer tool changes. Geometry that supports surface quality and edge security A relief angle of 7° and a corner radius of 0.8 mm give the insert a balanced geometry for both finishing and semi‑finishing passes. The square 90° shape provides four usable cutting edges per indexable plate, while the T3 thickness contributes to insert rigidity. For operators unfamiliar with these terms: the relief angle controls clearance behind the cutting edge to avoid rubbing, and the corner radius influences the achievable surface finish and the insert’s tendency to dull. Together, these features improve dimensional stability and help achieve consistent part tolerances. Application range, process advice and compatibility Specified for the ISO P group, the insert is suitable for unalloyed and alloyed Stahl grades encountered in general turning and boring. The combination of grade and chipbreaker supports a wide cutting‑parameter window, making the insert appropriate for both conventional and high‑productivity roughing strategies. For process integration, Metav Werkzeuge can advise on recommended cutting speeds, feeds and insert seat conditions. For further technical data or parameter recommendations, Metav Werkzeuge is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge for tailored application support or to arrange supply of the SCGT09T308-MP4 WPP20G Tiger·tec Gold insert; Metav Werkzeuge' consultants can recommend cutting parameters and delivery options to suit production needs. Technical Data SKU: SCGT09T308-MP4-WPP20G-WALTER Article designation: SCGT09T308-MP4 WPP20G Manufacturer: Walter Tools Product type: Turning and boring indexable insert Series: Tiger·tec Gold Core Data Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Grade: WPP20G Chipbreaker: MP4 Coating technology: Tiger·tec Gold Material group: P (Stahl) Execution: T FAQ What materials is this insert designed for? The SCGT09T308-MP4 WPP20G insert is designed for the ISO P material group, i.e. a wide range of Stahl grades including unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on the SCGT09T308-MP4 WPP20G promotes controlled chip formation, improving chip evacuation and stabilising cutting forces during turning or boring operations. How many cutting edges are available per insert? The square 90° geometry provides four usable edges on the SCGT09T308-MP4 WPP20G insert, supporting economical indexing and extended tool usage. Is this insert suitable for finishing passes? Yes; the combination of a 0.8 mm corner radius and 7° relief angle on the SCGT09T308-MP4 WPP20G helps achieve consistent surface quality and dimensional stability in finishing applications. Who supplies technical parameter recommendations for this insert? Metav Werkzeuge can provide cutting‑speed and feed guidance for the SCGT09T308-MP4 WPP20G; consult Metav Werkzeuge for process recommendations and specific application advice. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SCGT110502-G51 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, WKP35G grade and precise geometry for reliable chip control and long tool life; order via Metav Werkzeuge or request guidance from the consultants for optimal integration into production. SCGT110502-G51 WKP35G milling insert – Tiger·tec Gold for steel and cast iron (Walter Tools) SCGT110502-G51 WKP35G is a square milling insert engineered for productive metal removal in steel and cast iron, offering a coated carbide grade and a chipformer optimised for stable machining. Tiger·tec Gold coating for extended tool life Optimised for steel and cast iron machining Square 90° geometry, 0.2 mm corner radius Chipformer G51 for stable chip control Boosted productivity through advanced coating and grade The combination of the Tiger·tec Gold coating with the WKP35G coated-carbide grade provides a measurable improvement in wear resistance and process stability. This technical pairing reduces flank and crater wear under cyclic loads, which translates into longer intervals between indexings and fewer tool changes. In practical terms, the enhanced coating supports elevated cutting parameters on steel and cast iron, allowing a focus on throughput without compromising tool life. The result is a more consistent production flow and lower machining downtime. Consistent component quality from precise geometry A square 90° insert with a 0.2 mm corner radius and a 7° relief angle delivers reliable edge strength while maintaining the capability for tight corner definition and surface finish. The G51 chipformer is designed to control chip formation for typical steel and cast iron cuts, reducing the risk of built-up edge and stabilising cutting forces. These geometry features help ensure repeatable surface quality and dimensional consistency, especially in interrupted cuts and shoulder milling where predictable chip evacuation is essential. Practical integration for workshop applications This insert is suitable for a wide range of milling strategies where high process security and productivity are required. The SCGT110502-G51 WKP35G designation indicates the ISO geometry and the specific grade, making it straightforward to match with compatible tool holders. Selection of feeds and speeds should follow material-specific guidelines for P (steel) and K (cast iron) workpieces; the insert's coating and chip control permit conservative increases in cutting data for improved cycle times. For complex jobs or mixed-material batches, technical advice is available to align the insert choice with machine capability and fixture design. Contact Metav Werkzeuge for tailored application advice and order coordination; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCGT110502-G51-WKP35G-WALTER Article: Fräswendeschneidplatte SCGT110502-G51 WKP35G Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger-tec Gold Grade: WKP35G Chipbreaker: G51 Execution: T Facts Size: 11 mm Thickness: 0.5 mm Relief angle: 7° Corner radius: 0.2 mm Geometry: square 90° Tolerance class: G Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: P / K (steel, cast iron) Plate designation: SCGT110502-G51 WKP35G Chip control: G51 Series information: Tiger-tec Gold FAQ Which materials are best suited to this insert? The insert is engineered for machining steel and cast iron (material groups P and K), with the WKP35G grade and Tiger·tec Gold coating optimised for these applications. What does the G51 chipformer provide? The G51 chipformer promotes controlled chip breaking and stable evacuation during milling of steels and cast irons, contributing to consistent cutting forces and surface quality. How does the 0.2 mm corner radius affect results? A 0.2 mm corner radius balances edge strength and detail definition, improving resistance to edge chipping while supporting acceptable surface finish in standard milling operations. Is this insert suitable for interrupted cuts and shoulder milling? Yes; the square 90° geometry combined with the WKP35G grade and G51 chip control offers good performance in interrupted cuts and shoulder milling on steel and cast iron. How is the insert identified for tooling cross-reference? Identification uses the ISO-style designation SCGT110502-G51 WKP35G, which indicates the geometry, chipformer and grade to simplify holder and process matching. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SCGT110502-G51 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, precise geometry and robust chip control for reliable Stahl machining and longer tool life; order the insert via Metav Werkzeuge or consult our specialists for application advice. SCGT110502-G51 WPP35G milling indexable insert — Tiger·tec Gold coating, for Stahl | Walter Tools SCGT110502-G51 WPP35G is a square 90° milling insert designed for general and finish operations in Stahl, providing consistent cutting performance within the Tiger·tec Gold series Tiger·tec Gold coating for stable edge Optimised for machining Stahl Square 90° insert, 7° relief 0.2 mm corner radius for fine finish Consistent cutting with advanced coating technology The Tiger·tec Gold coating and the WPP35G grade combine to deliver a balance of wear resistance and toughness suited to common Stahl machining tasks. The multi-layer coating reduces friction and helps maintain a stable cutting edge under thermal load, which improves tool life and reduces downtime. For production environments this translates into more consistent component tolerances and fewer interrupted cycles, supporting higher throughput with predictable performance. Geometry tuned for accuracy and surface quality A square 90° shape with a 7° relief and a 0.2 mm corner radius provides a controlled cutting edge for both profiling and shoulder milling. The geometry reduces vibrations and supports stable chip formation, which contributes directly to improved surface finish and dimensional accuracy. In practice, this means fewer rework passes and less reliance on secondary finishing operations, benefiting both small-batch and serial production workflows. Process reliability and application benefits As a coated indexable insert, the component offers simple indexing and predictable behaviour across a range of Stahl grades. The G51 chipbreaker promotes manageable chip flow and reduces the risk of built-up edge, while the insert’s design supports reproducible clamping and repeatable machining results. This combination of features helps maximise machine uptime and can contribute to lower overall machining costs through longer intervals between tool changes. Contact Metav Werkzeuge to discuss the SCGT110502-G51 WPP35G insert and ensure the optimal tool setup for your Stahl applications — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: SCGT110502-G51-WPP35G-WALTER Name: Fräswendeschneidplatte SCGT110502-G51 WPP35G Walter Tools Product type: milling indexable insert Series: Tiger-tec Gold Grade: WPP35G Manufacturer: Walter Tools Facts Insert size: 11 Corner radius: 0.2 mm Relief angle: 7° Thickness: 05 Tolerance class: G Special features Coating: Tiger·tec Gold Chipbreaker: G51 Shape: Square 90° Material designation: P (for Stahl) Execution: T Application focus: Stahl FAQ What materials is this insert intended for? The SCGT110502-G51 WPP35G insert is designed primarily for Stahl machining and the grade optimises chip control and wear behaviour for a broad range of steel alloys. How does the Tiger·tec Gold coating affect productivity? The Tiger·tec Gold coating on this Walter Tools milling insert reduces friction and improves thermal stability, which commonly leads to longer tool life and fewer tool changes during production runs. Can the insert be used for both roughing and finishing? Yes, the geometry and the 0.2 mm corner radius make the insert suitable for mixed operations; the square 90° form supports both accurate shoulder milling and controlled finishing passes. Is chip control addressed by the design? The G51 chipbreaker is engineered to promote dependable chip formation and evacuation, reducing the risk of tangled chips and stabilising the cutting process. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. No affiliation is implied between our company and the named brands. The offered article is an original factory-new product of Walter Tools.
SCGT110502-G51 WSP45G Wendeplatten - Walter Tools
Benefit from the high productivity of the Tiger·tec Gold coating and the versatile WSP45G grade combined with the precise geometry (7° clearance and 0.2 mm corner radius) for consistent milling of demanding materials. Order the SCGT110502-G51 WSP45G directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. SCGT110502-G51 WSP45G – indexable milling insert with Tiger·tec Gold coating (Walter Tools) A SCGT110502-G51 WSP45G indexable milling insert designed for productive milling across a wide range of materials, offering stable edge life and reliable chip control in demanding operations. Tiger·tec Gold coated grade WSP45G Suitable for Stahl, rostfreier Stahl and superalloys Square 90° form with 0.2 mm corner radius 7° clearance for stable cutting Boosted productivity through a tough, coated grade The combination of the Tiger·tec Gold coating and the WSP45G PVD grade gives a durable, wear-resistant cutting edge that supports longer tool life and fewer changeovers. The coated carbide substrate reduces flank wear and helps maintain cutting geometry under thermal load, leading to more consistent component dimensions and surface quality. For production lines the result is measurable: fewer interruptions and a clearer path to predictable cycle times. Reliable performance across diverse workpiece groups This insert is engineered for machining the ISO material groups P/M/S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan-based materials. The grade balances toughness and thermal stability to handle the typical heat and chip formation challenges of these alloys, supporting secure chip control and reduced tendency to build up on the cutting edge. The result is stable machining where surface finish and process repeatability matter. Geometry tuned for accuracy and surface quality The square 90° form combined with a 0.2 mm corner radius delivers a balance between strength and edge definition, enabling improved edge stability and good corner strength when interrupted cuts occur. The chipbreaker G51 is optimised to promote regular chip shape and evacuation under a range of feeds, while the 7° clearance reduces rubbing on the flank face to protect the cutting edge and improve finish. These geometric choices reduce rework and support tighter tolerances in serial production. Practical advantages for workshop and production planning The SCGT designation and tolerance class G make tool management straightforward: clear identification, repeatable mounting and consistent indexing reduce setup time. The coated carbide construction and robust chip control lower tooling costs over time through extended tool life and fewer scrap parts. Combined with Walter Tools’ established quality standards, the insert supports an efficient production workflow and predictable maintenance cycles. For adaptation to specific machining strategies, Metav Werkzeuge’s consultants can advise on cutting data and toolholders. For tailored advice on incorporating the Tiger·tec Gold WSP45G insert into a production process, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and application guidance. Technical data SKU: SCGT110502-G51-WSP45G-WALTER Article designation: SCGT110502-G51 WSP45G Product type: milling indexable insert Manufacturer: Walter Tools Core technical data Clearance angle: 7° Corner radius: 0.2 mm Insert size: 11 Shape: Square 90° Grade: WSP45G Thickness: 05 Tolerance class: G Materials and special features Series: Tiger·tec Gold Coating: PVD coated carbide Chipbreaker: G51 Applicable material groups: P / M / S Execution: T Suitable for machining Stahl and rostfreier Stahl and heat-resistant superalloys FAQ What materials is this insert suitable for? The SCGT110502-G51 WSP45G insert is specified for ISO groups P / M / S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan-based alloys. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating enhances edge wear resistance and thermal stability, which leads to longer cutting life and more consistent surface finishes when using the SCGT110502-G51 WSP45G insert. What does the chipbreaker G51 provide? The chipbreaker G51 promotes controlled chip formation and evacuation over a range of feeds, reducing the risk of poor chip control and helping to protect the cutting edge during continuous milling. How does the insert geometry affect accuracy? The square 90° form with a 0.2 mm corner radius and 7° clearance supports strong corners and reduced flank contact, improving dimensional stability and surface quality in finished parts. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and designated trademarks are mentioned for explanation only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SCGT120408-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WSM20S grade for secure chip control and extended edge life in demanding materials; order via Metav Werkzeuge or consult its specialists for machining advice on challenging stainless and heat-resistant alloys. SCGT120408-FM2 WSM20S square turning insert — Walter Tools, Tiger·tec Silver, FM2 chipbreaker SCGT120408-FM2 WSM20S is a square-indexable turning insert designed for robust external and shoulder turning in difficult-to-machine materials such as stainless steels and superalloys. Tiger·tec Silver coating for high wear resistance Optimised chipbreaker FM2 for stable chip control Suitable for stainless steels (M) and superalloys (S) Square 90° insert with 0.8 mm corner radius Consistent cutting performance in demanding alloys The WSM20S grade, combined with the Tiger·tec Silver coating, provides a durable cutting edge that resists the heat and adhesion typical of stainless steels and heat-resistant superalloys. Coated carbide means a thin, engineered coating layer is applied to the substrate to improve wear resistance and thermal stability; this supports longer running times between index changes and reduces the risk of built-up edge that spoils surface finish. The result is a more reliable production process and predictable tool life under challenging conditions. Geometry that balances strength and surface quality A square 90° geometry with a 0.8 mm corner radius delivers rigidity where it matters and enables stable shoulder turning and facing operations. The relatively small corner radius helps achieve acceptable surface finish without compromising the robustness of the cutting edge. The insert’s relief angle of 7° contributes to a controlled cutting action and avoids excess rubbing on the flank. Together, these geometric features translate into consistent dimensional accuracy and reduced vibration during short overhang setups. Chip control engineered for secure processes The FM2 chipbreaker is optimised to form short, manageable chips in sticky or temperature-sensitive materials. Effective chip control lowers the likelihood of entanglement, reduces downtime for chip clearing and helps maintain coolant flow around the cutting zone. In combination with the coated carbide grade, the chipbreaker supports stable cutting conditions over a range of feeds and depths, improving process security in batch production or single-piece machining of high-value components. Practical application and system integration This insert fits standard ISO toolholders for square 90° plates and is intended for external turning and shoulder work in components made from stainless steels and nickel‑based alloys or titanium, depending on machining parameters and holder stiffness. The coated grade is particularly suitable when reliable edge stability and good wear resistance are required. For best results, pair the insert with a rigid holder and adjust cutting data to the material’s thermal and mechanical properties; Metav Werkzeuge can advise on cutting-data windows and suitable toolholder pairings. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and request specific cutting parameter guidance for your applications. Technical data Article number: SCGT120408-FM2-WSM20S-WALTER SKU: SCGT120408-FM2-WSM20S-WALTER Product: Drehwendeschneidplatte (turning insert) Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 12 Thickness code: 04 Tolerance class: G Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: FM2 Material suitability: stainless steels (M), superalloys/titanium (S) Execution: T FAQ Is this insert suitable for machining stainless steels? Yes. The SCGT120408-FM2 WSM20S insert from Walter Tools is specifically designed for stainless steels (ISO group M) and supports secure chip formation and improved edge life in these materials. What does the FM2 chipbreaker offer in practice? The FM2 chipbreaker produces short, controlled chips in sticky or heat-prone materials, reducing chip entanglement and helping to maintain steady machining conditions with the SCGT120408-FM2 WSM20S insert. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius offers a compromise between edge strength and surface finish: it provides a robust cutting edge for interrupted cuts and shoulders while still enabling good surface quality in normal turning operations. Can this insert be used for titanium or nickel-based superalloys? Yes. The WSM20S grade is indicated for ISO group S materials, which covers heat-resistant superalloys and titanium when machining parameters and holder rigidity are appropriate. What toolholder considerations are recommended? Use a rigid toolholder compatible with square 90° indexable inserts and ensure minimal overhang. Proper clamping and a stable setup help to exploit the coating and chipbreaker benefits of the SCGT120408-FM2 WSM20S insert. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer: Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
SCGT120408-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a WNN10 coated carbide grade and the FN2 chipbreaker for stable chip formation and reliable edge life; order directly via Metav Werkzeuge or consult our advisors for application support. SCGT120408-FN2 WNN10 – Indexable turning insert, FN2 chipbreaker, 90° square (Walter Tools) SCGT120408-FN2 WNN10 is an indexable turning insert designed for versatile turning tasks where consistent chip control and predictable tool life are required WNN10 coated carbide grade FN2 chipbreaker for reliable chip control 90° square insert for robust turning 0.8 mm corner radius for stable edge life Predictable chip control for efficient turning The combination of the FN2 chipbreaker and the WNN10 coated carbide grade focuses on reliable swarf formation, which reduces interruptions in automated and manual turning processes. The chipbreaker geometry is designed to break chips consistently across a range of cutting parameters, so the result is improved process uptime and fewer stoppages for clearing. In practical terms, this leads to a steadier material feed and a reduction in secondary handling. The coated carbide composition offers wear resistance under typical finishing and semi-roughing feeds, supporting repeatable surface quality and longer tool cycles compared with uncoated substrates. Robust geometry that supports heavier cuts and stability A 90° square plate with a 0.8 mm corner radius provides strong support at the cutting edge, increasing stability during interrupted cuts and plunge turning. The insert’s 7° clearance angle helps to avoid rubbing on the workpiece while maintaining contact where it matters, and the compact plate thickness 04 with nominal size 12 fits common toolholders used in general turning operations. These geometric choices balance edge strength with versatility: the square format allows multiple index positions per insert, reducing tooling costs, while the modest corner radius delivers both improved edge life and consistent dimensional control on turned components. Designed for reliable process selection and material coverage The insert belongs to the Walter grade series and is specified as a coated carbide class (WNN10). This grade is intended for a broad range of turning tasks; however, material suitability should be verified against the manufacturer’s product matrix for optimised cutting data. The tolerance class G and execution T signal consistent manufacturing tolerances and a standardised fit in compatible clamping systems, supporting repeatable positioning and stable cutting conditions. For engineers seeking to standardise inserts across a production cell, the predictable tolerance and grade characteristics simplify tool selection and inventory management. Workshop benefits: handling, indexing and stable part quality Handling is straightforward: the square form allows several indexing positions which extends the effective life per insert and reduces downtime for tool changeovers. The FN2 chip control reduces the risk of snarled swarf in automatic lathes and improves operator safety in manual operations. From a quality perspective, the interplay of grade and geometry contributes to steady surface finish and predictable dimensional outcomes, which is particularly beneficial when running small-series production or mixed-batch machining. The robust design supports both productivity and process reliability, helping to keep machining cycles consistent under varying load conditions. For procurement of Walter Tools inserts such as the SCGT120408-FN2 WNN10 or for advice on suitable grades and clamping solutions, please contact Metav Werkzeuge: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SCGT120408-FN2-WNN10-WALTER Product label: Drehwendeschneidplatte SCGT120408-FN2 WNN10 Walter Tools Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 7° Insert form: Square 90° Chipbreaker: FN2 Tolerance class: G Special features Coated carbide grade WNN10 Series: Walter grade series – open series Execution: T Material specification: catalogue dependent Intended use: turning / indexable insert FAQ What materials is this insert suitable for? The insert’s WNN10 coated carbide grade is intended for a broad range of turning operations; suitability for specific materials should be checked against the manufacturer’s product matrix before selection. How does the FN2 chipbreaker influence machining? The FN2 chipbreaker promotes short, controllable chips across many feed ranges, improving process uptime and reducing swarf-related interruptions during turning. How many index positions are available with this insert form? The 90° square format provides multiple usable cutting edges; this increases the number of index positions and extends the service life per insert compared with single-use geometries. What does the tolerance class G mean for clamping? Tolerance class G indicates standardised manufacturing tolerances that support consistent fit and repeatable positioning in compatible insert pockets, aiding stable cutting performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SCGT120408-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM20S grade and an MM4 chipbreaker delivers reliable edge stability and controlled chips when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or ask consultants for tailored recommendations. SCGT120408-MM4 WSM20S — turning and drilling indexable insert, Tiger·tec Silver, 7° relief (Walter Tools) SCGT120408-MM4 WSM20S is a square 90° indexable insert designed for combined drilling, boring and turning tasks in stainless steel and heat‑resistant superalloys, offering stable cutting performance and consistent surface quality. Tiger·tec Silver coating for heat resistance Optimised MM4 chip control Suitable for stainless steel and superalloys Square 90° geometry, 0.8 mm corner radius Proven performance for demanding materials The WSM20S grade, within the Tiger·tec Silver series, is developed for machining stainless steel and heat‑resistant superalloys where thermal loading and material toughness challenge tool life. The combination of a coated cemented carbide substrate and a robust microstructure offers improved cutting-edge stability, which reduces the frequency of insert changes and supports higher productive throughput. Practical benefits include fewer unplanned tool exchanges and more predictable cycle times in batch production. Geometry and chip control that improve process reliability Square 90° form and a 0.8 mm corner radius provide a balance between strength and accessibility for shoulder turning and boring operations. The MM4 chipbreaker is tuned to produce short, controllable chips in tough workpiece materials; this lessens the risk of chip entanglement and enhances coolant access to the cutting zone. A 7° relief angle reduces rubbing on the flank, supporting consistent surface finish and minimising heat build‑up at the cutting edge. Integration into the workshop and economic advantages The insert is supplied in the SCGT family format for holders commonly used in combined drilling and turning toolheads; the standardised form enables straightforward interchangeability and simplifies inventory management. The tolerance class G and execution T support repeatable seating and stable clamping, translating into repeatable component quality and lower scrap rates. For operations aiming to improve overall equipment effectiveness, this insert contributes to longer tool life and a lower cost per component when compared to uncoated or softer grades. Practical application recommendations and handling When machining stainless steel or titanium alloys with this grade and geometry, moderate cutting speeds combined with stable feed rates are advantageous to maintain edge life; coolant application assists thermal control and chip evacuation. The insert’s coated surface supports intermittent higher temperatures, permitting short bursts of increased productivity when process conditions permit. For adaptation to specific machines, holders or finishing requirements, technical consultation is recommended to match speeds and feeds to the workpiece and machining strategy. Contact Metav Werkzeuge for customised process recommendations and availability of Walter Tools Tiger·tec Silver inserts, and let our specialists advise on the optimal insert geometry for specific materials and machines. Technical Data Article number: SCGT120408-MM4-WSM20S-WALTER Designation: SCGT120408-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Size: 12 mm Corner radius: 0.8 mm Relief angle: 7° Thickness: 4 mm Tolerance class: G Special features Coating: Tiger·tec Silver Chipbreaker: MM4 Geometry: Square 90° Execution: T Material suitability: stainless steel (M), heat‑resistant superalloys / titanium (S) FAQ What materials is this insert suitable for? The insert is suitable for stainless steel and heat‑resistant superalloys; the WSM20S grade and Tiger·tec Silver coating support secure chip formation and edge stability in these materials. Can the SCGT120408-MM4 be used for both drilling and turning operations? Yes, the SCGT120408-MM4 form is designed for combined drilling/boring and turning applications when used with compatible toolholders. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker produces controllable, short chips in tough materials, improving chip evacuation and reducing the risk of chip re-cutting. What advantage does the 0.8 mm corner radius offer? A 0.8 mm corner radius increases edge strength for shoulder cuts while still allowing acceptable access for finishing passes, helping to balance tool life and surface quality. Is the insert suitable for interrupted cuts or high thermal loads? The Tiger·tec Silver coating and the WSM20S grade enhance thermal resistance and edge robustness, which helps under intermittent cutting and elevated temperatures; matching cutting parameters remains important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Registered trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
SCGT120408-MN2 WN10 Wendeplatten - Walter Tools
The combination of a square 90° geometry, the WN10 uncoated carbide grade and the MN2 chipbreaker delivers consistent chip control and reliable edge life for routine turning applications; order directly via Metav Werkzeuge or consult the team for application guidance. SCGT120408-MN2 WN10 turning insert (Square 90°, MN2 chipbreaker) – Walter Tools SCGT120408-MN2 WN10 is a square-indexable turning insert designed for general turning tasks where predictable chip formation and reproducible performance are required. Uncoated cemented carbide WN10 Square 90° geometry for robust shoulder turning MN2 chipbreaker for controlled chips 0.8 mm corner radius for edge stability Consistent geometry for predictable results The square 90° geometry combined with a 0.8 mm corner radius provides a robust cutting edge that resists chatter and supports shoulder operations. The 7° clearance angle reduces rubbing and helps to maintain steady cutting forces, which contributes directly to repeatable part quality. By choosing an insert with standardised geometry and tolerance class G, process planners benefit from consistent seating in negative-style toolholders and predictable engagement behaviour during serial production. Practical grade and economical performance The WN10 designation denotes an uncoated cemented carbide grade intended for broad, general-purpose turning; it balances cost and wear resistance for many routine jobs. As an uncoated grade, this insert can be preferable where oxidation or coating interactions are a concern, or where light reconditioning is part of the process. Checking the manufacturer’s product matrix is recommended to confirm suitability for specific workpiece materials and cutting conditions; the grade is aimed at delivering good overall economy and straightforward tool management. Chip control that stabilises the process The integrated MN2 chipbreaker is engineered to break and direct chips reliably under a range of cutting parameters, reducing the risk of long, stringy chips that complicate handling and inspection. Controlled chips improve operator safety, minimise interruptions for chip clearing and support higher process uptime. The insert’s 12 mm size and the thickness code 04 combine with the chipbreaker geometry to ensure a balance between edge strength and the chip-formation behaviour expected in routine turning cycles. Easy integration and handling in the shop The insert follows standard ISO-style designation conventions, which simplifies selection for holders compatible with negative square inserts. The nominal dimensions and tolerance class enable straightforward replacement and predictable seating, reducing setup time during tool changeovers. With its uncomplicated design and proven material class, the indexable cutting element suits batch production and mixed-series environments where reliable interchangeability and downtime reduction are priorities. For machining tasks demanding dependable chip control and repeatable performance, select the Walter Tools SCGT120408-MN2 WN10 turning insert and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SCGT120408-MN2-WN10-WALTER Article designation: SCGT120408-MN2 WN10 Manufacturer: Walter Tools Product type: turning insert (indexable) Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Square 90° Insert size: 12 mm Thickness code: 04 Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated cemented carbide) Series: Walter Schneidstoffsorte - Serie offen Base designation: SCGT120408-MN2 Execution: T FAQ What workpiece materials is this insert suitable for? Suitability depends on the manufacturer’s product matrix; the WN10 grade is an uncoated cemented carbide intended for general turning tasks, so material compatibility should be verified against the specific cutting data for the intended workpiece. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes segmented, controllable chips across a range of feeds, improving chip evacuation and reducing the likelihood of entangling or long continuous chips that disturb the process. What does the thickness code "04" mean? The code indicates the standardised thickness designation for this insert family; exact nominal thickness corresponds to the ISO/series specification and should be cross-checked with the toolholder and technical drawing for precise assembly. Which toolholder type is required for this insert designation? The SCGT-style designation corresponds to negative-square indexable inserts; the insert fits holders designed for SCGT inserts with a 90° nose profile and the specified clamping method. How does the 0.8 mm corner radius influence finished parts? A 0.8 mm corner radius provides a compromise between strength and surface finish: it enhances edge robustness for interrupted cuts while producing a moderate contour that can improve surface integrity versus very sharp radii. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer; the manufacturer in this case is Walter Tools.
SCGT120408-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of a coated carbide grade that delivers consistent edge life and reliable chip control, combined with a robust MN2 chipbreaker and a square 90° form for stable turning results. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific selection. SCGT120408-MN2 WNN10 — Turning indexable insert, square 90°, MN2 chipbreaker (Walter Tools) The SCGT120408-MN2 WNN10 is a square 90° turning insert in coated carbide, designed for general turning tasks where predictable chip control and repeatable edge life are required Coated carbide cutting grade WNN10 MN2 chipbreaker for consistent chips Square 90° form with 0.8 mm radius 7° clearance and 04 thickness Predictable cutting performance with optimised chip control The insert combines a coated carbide grade with an engineered MN2 chipbreaker, delivering controlled chip formation and steady cutting forces. The square 90° geometry and 0.8 mm corner radius provide a balance between edge strength and cutting precision, making the component suitable for a range of turning tasks. Material suitability should be verified against the official product matrix; the cutting grade is intended for versatile use across many workpiece families when matched correctly. By highlighting repeatability and consistent chip evacuation, the design reduces the need for frequent intervention while maintaining surface integrity on the workpiece. Increased process stability and extended tool life A modest 7° clearance limits flank rubbing while preserving the active cutting edge under varying feed conditions. The plate thickness (04) and square format promote rigidity in the toolholder, which in turn reduces vibration and supports longer tool life. The coated surface of the grade enhances wear resistance and contributes to a steadier flank wear progression, helping to maintain dimensional accuracy over longer cutting runs. This focus on process stability benefits production environments that require consistent cycle times and a reliable component finish. Practical selection and integration guidance for workshop use The insert is supplied in the standard SCGT contour and bears the designation SCGT120408-MN2 WNN10, making it directly compatible with toolholders designed for SCGT-style plates. The MN2 chipbreaker is optimised for general turning operations; however, selection should be guided by the cutting data sheet and the product matrix to ensure correct matching to workpiece material and cutting conditions. Indexable inserts of this format allow for simple rotation to a fresh cutting edge, reducing tooling downtime and improving cost-efficiency per edge. For bespoke machining strategies or uncertain material classes, technical consultation is recommended. Contact Metav Werkzeuge today for tailored selection and availability of Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SCGT120408-MN2-WNN10-WALTER Article name: Drehwendeschneidplatte SCGT120408-MN2 WNN10 Walter Tools Brand: Walter Tools ISO designation: SCGT120408-MN2 WNN10 Core specifications Size: 12 Thickness: 04 Corner radius: 0.8 Clearance angle: 7° Shape: Square 90° Design & features Coating: Katalogabhängig Cutting grade: WNN10 Chipbreaker: MN2 Execution: T Tolerance class: G Series: Walter Schneidstoffsorte - Serie offen Designation without grade: SCGT120408-MN2 FAQ What materials is this insert suitable for? Material suitability must be checked in the official product matrix; the SCGT120408-MN2 WNN10 is a coated carbide grade designed for broad application, but specific performance depends on the matched workpiece material. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on the insert promotes short, controlled chips and stable cutting forces, which supports consistent surface finish and reduces interruption from long, stringy chips when the cutting data are applied correctly. Can this insert be rotated to a fresh edge during production? Yes, the square 90° format of the SCGT120408-MN2 WNN10 allows multiple usable edges; indexed rotation reduces tool change frequency and improves cost-efficiency per edge. What is the effect of the 0.8 mm corner radius? The 0.8 mm corner radius increases edge robustness compared with a smaller radius, enhancing resistance to chipping and improving dimensional stability under intermittent cuts or heavier feeds. Which toolholders accept this insert geometry? Holders designed for SCGT-style inserts are compatible with the SCGT120408-MN2 WNN10; correct clamping and seat conformity are essential to achieve the stated process stability. Is the grade suitable for finishing operations? The coated grade and controlled chipbreaking behaviour support good surface quality; final suitability for finishing should be validated against the cutting parameter recommendations and the product matrix. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, unused product of the manufacturer.
SCGT120408-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the wear-resistant Tiger·tec Gold coating together with the MP4 chipbreaker for consistent chip control and extended tool life in steel machining. The square 90° geometry with a 0.8 mm corner radius delivers predictable edge strength and repeatable component tolerances. Order the insert directly via Metav Werkzeuge or consult our application specialists for process optimisation. SCGT120408-MP4 WPP20G – Square 90° turning/boring insert for steel by Walter Tools The SCGT120408-MP4 WPP20G is a square 90° indexable insert designed for turning and boring operations in steels, featuring a Tiger·tec Gold coated grade for enhanced wear resistance. Tiger·tec Gold coated grade WPP20G Designed for ISO P (steel) machining Square 90° form, 0.8 mm corner radius MP4 chipbreaker for stable chip control Extended tool life through advanced coating technology The coated carbide grade WPP20G, part of the Tiger·tec Gold series, combines a wear-resistant coating with a substrate optimised for the temperatures and chip forms typical in steel turning. This results in improved flank and crater wear resistance, which extends tool life and reduces changeover frequency. Coated grades are engineered to maintain cutting-edge integrity under thermal and mechanical load; in practice this means fewer interruptions to production and more consistent part quality over long runs. Predictable geometries for accurate and repeatable results A square 90° insert profile paired with a 0.8 mm corner radius yields a robust cutting edge that balances strength and surface finish. The modest radius enhances edge stability during heavier cuts while still enabling good surface quality in finishing passes. The 7° clearance angle reduces rubbing and helps maintain dimensional accuracy across tool life. These geometric parameters support tight tolerances and repeatable cycle times in batch production. Controlled chips and stable processes with the MP4 breaker The MP4 chipbreaker is tuned for chip formation in steels (ISO P), promoting short, manageable chips that evacuate reliably from the cutting zone. Stable chip control lowers the risk of chip entanglement, protects the workpiece surface and toolholder, and contributes to safer, more predictable machining. For manufacturers seeking to improve process stability, the chipbreaker design is a direct contributor to reduced scrap rates and fewer machine interventions. Integration into production and practical advantages The insert designation SCGT120408-MP4 follows standard indexable insert geometry, enabling straightforward integration into toolholders that accept the SCGT format. With tolerance class G and execution T, the insert provides consistent seating and repeatable indexing for multi-edge use. The WPP20G grade is primarily intended for steel machining, offering a versatile balance between wear resistance and toughness suitable for a broad range of turning tasks from roughing to light finishing. Discuss Tiger·tec Gold performance and application options with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations and availability Technical data Article number: SCGT120408-MP4-WPP20G-WALTER Designation: SCGT120408-MP4 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Specifications Plate size: 12 mm Plate thickness: 04 Corner radius: 0.8 mm Clearance angle: 7° Features Coating: Tiger·tec Gold Chipbreaker: MP4 Applicable material group: Steel (ISO P) Tolerance class: G Execution: T Plate form: Quadrat 90° Insert type: SCGT turning/boring insert FAQ Is this insert suitable for stainless steel? The WPP20G grade and SCGT120408-MP4 insert are optimised for ISO P (steel); they are not specified for stainless steel applications and performance may differ on austenitic or high-alloy stainless types. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating improves wear resistance and thermal stability during turning of steels, which helps extend tool life and maintain dimensional consistency in longer production runs. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes short, controllable chips in steel machining, enhancing evacuation from the cutting zone and reducing the chance of entanglement or surface damage. Which toolholders are compatible with this insert? The insert follows the SCGT format; it fits holders designed for SCGT120408 geometry and the corresponding clamping system—verify holder compatibility and clamping torque before first use. Can this insert be used for finishing passes? Yes, the combination of the square form, 0.8 mm corner radius and the WPP20G grade supports a range of operations from roughing to light finishing, depending on cutting data and machine stability. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
SCGW09T304FS-9 WDN10 W - Wendeplatten - Walter Tools
Benefit from the combination of PCD-grade wear resistance, a 0.4 mm corner radius and a 7° clearance angle for productive, low-wear turning of abrasive non-ferrous materials; order the insert directly via Metav Werkzeuge or ask our consultants if needed. SCGW09T304FS-9 WDN10 — indexable turning insert, PCD grade, Walter Tools The SCGW09T304FS-9 WDN10 is an indexable turning insert engineered for abrasive, non‑ferrous materials and fine finishing operations on demanding components. PCD grade WDN10 for abrasive materials Square 90° geometry for stable turning 0.4 mm corner radius for controlled finishing 7° clearance angle for secure cutting action Durable, wear‑resistant cutting for abrasive tasks The insert is manufactured in a polycrystalline diamond (PCD) grade designated WDN10, which is tailored to resist abrasion when machining hard, non‑ferrous and composite materials. The use of PCD provides significantly improved tool life compared with conventional carbide on abrasive workpieces, reducing downtime for tool changes and supporting steady productivity. For production planning this translates into fewer interruptions, a reduced tooling bill over time and more predictable cycle outcomes. The material choice should be matched to the specific workpiece; the grade WDN10 is optimised for high abrasion resistance and broad material coverage in the non‑ferrous sector. Geometry that delivers consistent surface quality and process security The square 90° form and a 0.4 mm corner radius create a robust cutting edge that balances strength with the ability to produce fine surface finishes. A larger corner radius strengthens the tip against edge chipping and helps maintain consistent dimensional accuracy, while the 7° clearance angle ensures the insert runs with predictable cutting forces and reduced rubbing. Together these geometry features support reliable chip formation and enhance surface finish without excessive tool loading. Operators will notice steadier cutting behaviour and fewer reworks when the insert is applied within its intended process window. Chip control and handling for stable machining This variant includes a dedicated chipbreaker pattern (designation: 9) which assists in producing short, manageable chips during turning operations. Effective chip control reduces the risk of entanglement, protects the workpiece surface and simplifies evacuation in automated setups. The insert thickness (T3) and the SCGW09T304FS-9 platform contribute to secure clamping and repeatable positioning in standard toolholders, supporting consistent machining results part after part. When combined with appropriate feeds and speeds for PCD tooling, this leads to higher throughput and lower scrap rates. Application guidance and compatibility considerations As a PCD insert, this component is primarily suited to abrasive, non‑ferrous materials rather than hardened steels. The WDN10 grade excels on materials such as aluminium alloys with abrasive fillers, graphite‑filled plastics and certain non‑ferrous composites. Correct selection of holder geometry and machining parameters is essential: use recommended cutting data from toolholder manufacturers and verify compatibility with the machine’s rigidity and power. If tool life optimisation or cutting data adjustments are required, Metav Werkzeuge’s consultants can advise on feeds, speeds and coolant strategies to ensure reliable process integration. Contact Metav Werkzeuge for tailored application advice on Walter Tools PCD inserts and to secure the correct specification for the production task. Technical Data SKU: SCGW09T304FS-9-WDN10-WALTER Product: indexable turning insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Designation: SCGW09T304FS-9 Numbers / Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Chipbreaker: 9 Thickness: T3 Tolerance class: G Special features / Versions Material: catalogue dependent Cutting material class: polycrystalline diamond (PCD) Shape: square 90° Axite note: WDN10 is a Walter PCD grade optimised for abrasive non‑ferrous materials Platform designation: SCGW09T304FS-9 FAQ What materials is this insert designed for? The SCGW09T304FS-9 WDN10 insert is designed primarily for abrasive, non‑ferrous materials and composite applications; the PCD WDN10 grade excels where abrasion resistance is required. How does the corner radius affect performance? A 0.4 mm corner radius increases edge strength and supports a consistent surface finish; the combination of the radius and square 90° geometry helps prevent chipping during interrupted cuts. Is this insert suitable for hardened steels? No; PCD grades such as WDN10 are not intended for hardened steels. The insert performs best on non‑ferrous and abrasive materials — verify suitability with the product matrix before application. Which chip control features are included? This insert includes chipbreaker designation 9 to promote short, controllable chips and safer evacuation in turning operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; [no direct contact provided] Walter Tools and related names are protected trademarks and are used here for description of the original factory‑new products. The Walter AG brand (Walter Tools) is part of the Sandvik Group; the company is a leading global manufacturer of precision tools for metalworking. Marked brand names remain the property of their respective owners.
SCGW09T304TS-4 WBK20 Wendeplatten - Walter Tools
Take advantage of a wear-resistant CBN grade, a robust 90° square geometry and a precise 0.4 mm corner radius to secure longer tool life and reliable hard-turning productivity; order the insert via Metav Werkzeuge or contact our consultants for application advice. SCGW09T304TS-4 WBK20 indexable turning insert by Walter Tools — CBN grade for hard, wear-intensive machining The SCGW09T304TS-4 WBK20 is a square indexable turning insert engineered for hard and heavily wear-prone machining tasks, offering a combination of CBN cutting material and a geometry tuned for stable shoulder cuts and predictable edge life. *CBN grade WBK20 for hard materials *Square 90° insert geometry *7° clearance angle for stable cutting *0.4 mm corner radius for precise edge High productivity through CBN material and consistent edge life The use of CBN as the cutting material (WBK20) delivers a decisive advantage when turning hardened steels and other high-wear alloys: significantly improved wear resistance and thermal stability compared with conventional carbide grades. For production environments where insert change intervals and process stability influence cycle time, the CBN composition reduces tool change frequency and maintains cutting performance over longer runs. This leads to lower process variability and helps stabilise surface finish across batches. Geometry that promotes robustness and surface quality A 90° square form combined with a 0.4 mm corner radius provides a strong cutting edge that resists chipping in intermittent or heavy cuts, while the modest radius balances cutting force and surface integrity. The listed 7° clearance reduces flank rubbing and helps maintain dimensional accuracy on shoulders and faces. Together, these geometric choices support a reliable finish on critical components and reduce rework rates in finishing operations. Stable chip control and secure clamping for repeatable results With chipbreaker 4 and a plate thickness of T3, the insert is designed to manage chips effectively in medium to heavy cutting conditions, assisting coolant flow and evacuation. The combination of chip control and stable thickness supports predictable cutting forces and repeatable tool performance, which is essential in serial production or automated turning centres. Using the correct seat and clamping arrangement further ensures repeatable positioning and consistent tolerance achievement. Application guidance and compatibility checks The insert originates from the Walter open series and carries the WBK20 designation; suitability for specific alloys should be verified against the manufacturer product matrix before application. While optimised for hardened steel and comparable wear-prone materials, the exact workpiece mix and machining parameters determine achievable tool life and cycle efficiency. For shops integrating CBN into existing processes, small validation runs and adjustments to cutting speed and feed will typically unlock the best balance between productivity and edge longevity. Contact Metav Werkzeuge for detailed application support and to discuss Walter Tools CBN turning inserts for hardened-steel machining Technical Data Article number: SCGW09T304TS-4-WBK20-WALTER Product name: SCGW09T304TS-4 WBK20 Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Insert form: Square 90° Corner radius: 0.4 mm Clearance (free) angle: 7° Insert size: 09 Thickness: T3 Chipbreaker: 4 Tolerance class: G Grade series: Walter Schneidstoffsorte - Serie offen Special features Cutting material: CBN (WBK20) Material specification: Katalogabhängig Designed for hard, wear-intensive machining tasks Optimised for stable edge life and process repeatability Sorteneinsatz guidance: check product matrix for workpiece suitability FAQ What materials is this insert best suited for? This insert, the SCGW09T304TS-4 WBK20 from Walter Tools, is formulated as a CBN grade primarily for hardened steels and other highly abrasive alloys; verify exact compatibility in the product matrix. Can the insert tolerate interrupted cuts? The 90° square geometry and a 0.4 mm corner radius give the indexable insert robust resistance to chipping, making it suitable for many interrupted and shoulder-cutting applications. How does the chipbreaker affect performance? The chipbreaker 4 aids controlled chip formation and evacuation under medium to heavy cutting, supporting stable cutting forces and improving process security when used with appropriate cutting parameters. Which machine settings should be adjusted for CBN inserts? When adopting CBN inserts, increase cutting speed and monitor feed and depth to find the optimal balance; consult Metav Werkzeuge for recommended starting parameters tailored to the workpiece material and machine. Is this insert compatible with common tool holders? The SCGW09T304TS-4 WBK20 is a standard square indexable format; compatibility with tool holders depends on seat type and clamping system—confirm holder suitability prior to assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any association or endorsement between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
SCGW09T308TS-4 WBK20 Wendeplatten - Walter Tools
Benefit from the combination of CBN wear resistance, precise geometry and effective chip control to maintain steady production on hardened components; order the insert directly via Metav Werkzeuge or ask our consultants if needed. SCGW09T308TS-4 WBK20 – CBN indexable turning insert (square 90°) by Walter Tools, for hard, wear‑intensive machining The SCGW09T308TS-4 WBK20 is a square 90° indexable turning insert intended for wear‑resistant operations on hardened steels and similar demanding materials, offering a balance of durability and consistent cutting performance. CBN grade WBK20 for hard, wear‑intensive machining Square 90° form with 0.8 mm corner radius 7° clearance angle for consistent cutting performance Chipbreaker 4 and T3 plate thickness Increased productivity through CBN wear resistance The CBN composition of the WBK20 grade is engineered for hard, highly abrasive turning operations, which translates into longer tool life and fewer changeovers on heat‑treated components. Cubic boron nitride excels where conventional carbides wear quickly; using a CBN insert reduces unscheduled downtime and improves process stability. For production environments with frequent hard material work, the insert’s wear resistance can deliver measurable productivity gains and more predictable tool‑life cycles. Geometry that stabilises cutting and finish A square 90° form combined with a 0.8 mm corner radius and a 7° clearance angle provides mechanical stability and repeatable contact geometry, which helps to achieve a reliable surface finish on turned parts. The corner radius controls edge strength and influences cutting forces; a modest radius like 0.8 mm balances robustness and the ability to produce precise contours. The clearance angle reduces rubbing and heat build‑up, contributing to consistent tool behaviour over longer runs. Controlled chips and simple integration into existing toolholders The chipbreaker 4 design and T3 plate thickness support stable chip control in many finishing and semi‑finishing operations where CBN is appropriate. Although the insert is optimised for hard, wear‑intensive applications, compatibility with specific workpiece materials should be confirmed against the product matrix to ensure the right grades and cutting data are selected. The insert is supplied in a standard square form that fits common clamping systems, enabling straightforward adoption in established turning setups. For production advice on integrating Walter Tools CBN inserts into hardened‑steel machining, contact Metav Werkzeuge for tailored recommendations and data: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SCGW09T308TS-4-WBK20-WALTER ISO designation: SCGW09T308TS-4 WBK20 Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WBK20 Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Thickness: T3 Chipbreaker: 4 Tolerance class: G Special features Cutting material: CBN (WBK20) Execution: W Material reference: catalog-dependent Intended for hard, wear‑intensive machining; check product matrix FAQ What materials is this insert intended for? The SCGW09T308TS-4 WBK20 insert is a CBN grade designed primarily for hardened steels and other hard, wear‑intensive materials; final suitability should be checked in the product matrix. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius on this insert increases edge strength and stabilises cutting forces, which helps produce a consistent surface finish while offering improved resistance to chipping. Can the insert be used in existing toolholders? The insert is a standard square 90° form that fits common clamping systems; ensure correct seat and clamping geometry for optimal performance with the SCGW09T308TS-4 WBK20. What benefit does chipbreaker 4 provide? Chipbreaker 4 is intended to improve chip control under the insert’s recommended cutting conditions, contributing to safer chip removal and more reliable turning cycles. Is there any special handling or inspection recommended for CBN inserts? CBN grades like WBK20 require careful control of cutting parameters and regular inspection for edge wear; inspect the SCGW09T308TS-4 WBK20 for flank wear and edge integrity at set intervals during production. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are used here for clarification only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the stated manufacturer.
SCHT110502-K85 WN15 Wendeplatten - Walter Tools
Combining the WN15 uncoated cemented carbide grade with the K85 chipbreaker and a 7° relief angle delivers stable chip formation and reliable milling performance; this insert is a compact solution for precise, repeatable cuts. Order the (SCHT110502-K85 WN15) directly via (Metav Werkzeuge) or ask our consultants if needed. SCHT110502-K85 WN15 – Milling indexable insert, square 90°, 11 mm by Walter Tools A SCHT110502-K85 WN15 milling insert engineered for predictable chip control and robust performance in general milling applications Uncoated carbide grade WN15 K85 chipbreaker for stable chips 7° relief for reliable cutting Square 90° form, 0.2 mm radius Consistent chip control reduces interruptions and improves surface quality The combination of the K85 chipbreaker with an uncoated cemented carbide grade provides controlled chip formation that reduces rework and downtime. A well-designed chipbreaker directs chips away from the cutting zone, which helps maintain cutting-edge integrity and supports longer tool cycles. The 7° relief angle keeps the cutting geometry efficient while limiting rubbing on the flank, so milling operations benefit from consistent performance and fewer stoppages for chip clearing. Geometry and small radius enhance edge strength and finish The insert’s square 90° form and 0.2 mm corner radius balance edge strength with achievable surface finish. A small corner radius increases resistance to edge chipping while still allowing accurate contouring of features; this is particularly useful when working with interrupted cuts or varying engagement. Tolerance class H and the series coding indicate the manufacturer’s dimensional control, helping planners match the insert to suitable cutter bodies and holders for repeatable results. Selection guidance that supports process reliability This grade belongs to Walter’s open series and is identified by the WN15 designation; material suitability should be verified against the manufacturer’s product matrix before production use. The insert is identified by the code series and the chipbreaker type, which simplifies matching to existing tool bodies. For production planning, consider the intended cutting strategy, feed rates and depth of cut — the insert’s design supports stable milling when these parameters are aligned with the toolholder and machine capability. For tailored application advice, availability checks or help with tool selection for the SCHT110502-K85 WN15 insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930; our consultants will assist with integration into the machining process Technical data SKU: SCHT110502-K85-WN15-WALTER Designation: SCHT110502-K85 WN15 Manufacturer: Walter Tools Product type: Milling indexable insert Series: Walter Schneidstoffsorte - Serie offen Grade: WN15 Material: Uncoated cemented carbide Facts Relief angle: 7° Corner radius: 0.2 mm Plate size: 11 mm Thickness code: 05 Tolerance class: H Special features Chipbreaker: K85 Plate form: Square 90° Execution code: T Open grade series for general applications FAQ What does the K85 chipbreaker achieve? The K85 chipbreaker on the SCHT110502-K85 WN15 insert promotes controlled chip segmentation and evacuation, helping to reduce recutting of chips and supporting more stable machining cycles. Is the insert coated? This insert is an uncoated cemented carbide grade (WN15); the lack of coating makes it suitable for certain cutting strategies and requires selection based on the workpiece material via the product matrix. How does the 0.2 mm corner radius affect cut quality? A 0.2 mm radius increases edge robustness and reduces the likelihood of chipping under higher loads while still allowing a fine surface finish on milled faces. Which cutter pockets accept this insert family? Inserts of the SCHT110502 series are intended for milling cutters designed for square 90° inserts; compatibility depends on the cutter manufacturer’s pocket geometry and clamping method. How to verify material suitability for a specific job? Material suitability for this WN15 grade should be checked in the manufacturer’s product matrix and by reviewing machining parameters; the matrix indicates which materials and cutting conditions are recommended. Hersteller: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are referenced for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SCHT110502-K85 WXN15 K85 Wendeplatten - Walter Tools
Take advantage of the combination of sharp uncoated carbide and an optimised K85 chipbreaker for efficient, burr‑free machining of non‑ferrous materials; the square 90° geometry and 0.2 mm corner radius support stable cutting and repeatable results. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. SCHT110502-K85 WXN15 milling indexable insert – square 90°, K85 chipbreaker (Walter Tools) SCHT110502-K85 WXN15 is a sharp, uncoated carbide milling insert designed for high‑productivity machining of non‑ferrous metals such as aluminium, copper and brass in a Walter N‑series geometry. Uncoated carbide grade WXN15 Optimised for non‑ferrous metals Square 90° geometry for stability 0.2 mm corner radius for precision 7° clearance angle reduces rubbing Precision and performance for non‑ferrous machining The uncoated carbide composition of the WXN15 grade delivers a low‑friction cutting edge tailored for non‑ferrous alloys. This ensures reduced material adhesion and a cleaner chip flow when machining aluminium, copper and brass, which in turn lowers downtimes for rework. Combined with the chipbreaker K85, the insert promotes consistent chip control, allowing higher feed rates and predictable tool life in production environments where process reliability matters. Stable geometry for repetitive accuracy A square 90° shape with a 0.2 mm corner radius provides mechanical rigidity at the cutting edge, improving stability in shoulder milling and slotting operations. The 7° clearance angle reduces flank contact and rubbing, helping to maintain surface finish and dimensional accuracy across repeated cycles. These geometric choices translate into fewer deflections, more consistent tolerances and a simpler set‑up routine for batch production. Practical benefits and ease of specification The insert belongs to the Walter N‑series and is supplied in the SCHT110502‑K85 format, making it straightforward to specify for programmers and toolroom staff. Its uncoated, sharp‑edge concept is especially suitable for shops prioritising high metal removal rates in NE‑materials while keeping tool inventories compact. Where operators require quick decisions, the combination of WXN15 and K85 offers an economical balance of cutting performance and predictable wear behaviour. For application advice and to order Walter Tools inserts such as SCHT110502‑K85 WXN15, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical Data Article number: SCHT110502-K85-WXN15-WALTER Label: Fräswendeschneidplatte SCHT110502-K85 WXN15 Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Relief angle: 7° Corner radius: 0.2 mm Inscribed circle / size: 11 mm Thickness: 0.5 mm Special features Walter N‑series Grade: WXN15 (uncoated carbide) Chipbreaker: K85 Square 90° plate form Execution: T Tolerance class: H Suitable for non‑ferrous metals (N) FAQ What materials is this insert suitable for? The SCHT110502‑K85 WXN15 insert is optimised for non‑ferrous metals such as aluminium, copper and brass, thanks to its sharp, uncoated cutting edge and K85 chipbreaker. Is the insert coated or uncoated? The WXN15 grade for this insert is an uncoated carbide, chosen to provide a razor‑sharp cutting edge and reduced material adhesion in NE‑materials. What applications suit the square 90° geometry? The square 90° form is ideal for shoulder milling and slotting operations where rigidity and repeatable edge engagement are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT060204-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold wear resistance and the WPP20G grade’s reliability for consistent steel machining; the square 90° geometry with a 0.4 mm corner radius and 7° relief ensures stable cutting and predictable chip formation. Order directly through Metav Werkzeuge or request application advice from the consultants. SCMT060204-E47 WPP20G drilling/boring indexable insert — Square 90°, Tiger·tec Gold — Walter Tools The SCMT060204-E47 WPP20G is a square, 90° indexable insert designed for drilling and boring operations in steel, optimised for stable chip control and long tool life. Tiger·tec Gold coating for extended tool life Optimised for steel (ISO group P) machining Square 90° geometry with 0.4 mm corner radius 7° relief angle for consistent cutting engagement Reliable productivity for steel machining The combination of a Tiger·tec Gold coating and the WPP20G grade produces a balance between wear resistance and toughness that favours repeatable machining in a variety of steel grades. The coated carbide substrate maintains a stable cutting edge under the thermal loads typical of steel turning and boring, which reduces unexpected tool changes and downtime. This results in predictable process windows and contributes to improved cycle times on medium- to high-volume production runs. Predictable cutting behaviour and chip control A square 90° insert form and a dedicated E47 chipbreaker deliver defined chip formation that facilitates evacuation during drilling and enlarging operations. The 0.4 mm corner radius helps to distribute cutting forces and improves edge strength, while the 7° relief angle reduces friction at the flank, lowering the risk of edge build-up. These geometric choices support consistent hole quality and surface finish while limiting tool-induced vibration. Practical benefits for workshop efficiency Selecting this insert simplifies tooling decisions for steel applications: the grade is expressly engineered for ISO group P materials, covering unalloyed and alloyed steels with an emphasis on balanced wear behaviour. The insert’s square shape provides four usable cutting edges per index, enhancing economic efficiency and reducing tooling cost per part. In processes where tool life and consistent part quality are key, this insert contributes to fewer interventions and smoother throughput. Application guidance and compatibility The insert is specified as SCMT060204-E47 WPP20G, thickness “02” and size “06”, with tolerance class M and execution T, making it compatible with a broad range of standard drill and boring toolholders that accept this ISO designation. As a coated carbide insert optimised for steel, it suits operations that demand both edge stability and reliable wear resistance rather than extreme high-speed specialist cutting. When integrating into a tool system, attention to correct clamping and cutting data will maximise the benefits of the coating and geometry. Contact Metav Werkzeuge for tailored cutting-data recommendations or to discuss how the Walter Tools SCMT060204-E47 WPP20G can be integrated into existing holder systems Technical Data Article number: SCMT060204-E47-WPP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte SCMT060204-E47 WPP20G Walter Tools ISO designation: SCMT060204-E47 WPP20G Core figures Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: E47 Shape: Square 90° Application: Steel (P) Tolerance class: M Execution: T FAQ What steels is this insert suited for? The SCMT060204-E47 WPP20G is engineered for ISO group P materials, covering unalloyed and alloyed steel grades where a balance of wear resistance and toughness is required. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating enhances thermal and abrasive wear resistance on the insert, extending tool life and stabilising performance during prolonged drilling or boring in steel. Can the insert be indexed to use multiple edges? Yes, the square 90° design permits multiple edge indexing; the SCMT060204-E47 WPP20G provides several usable cutting edges to improve cost efficiency per operation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SCMT060204-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WPP20S grade and a compact square geometry for consistent, long-lasting performance when machining steel; order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge’s experts for application advice. SCMT060204-E47 WPP20S – Drilling/Boring indexable insert, Tiger·tec Silver coating (for steel) — Walter Tools SCMT060204-E47 WPP20S is a square 90° indexable insert designed for drilling and boring operations in steel, combining a robust corner radius with a coated carbide grade optimised for general-purpose steel machining. Tiger·tec Silver coating for improved wear resistance WPP20S grade optimised for steel machining Square 90° form with 0.4 mm corner radius 7° clearance angle for stable cutting High-performance grade and coating for predictable tool life The WPP20S grade, part of the Tiger·tec Silver series, is a coated carbide formulation engineered for the typical thermal and chip-formation conditions encountered when machining steel (ISO P group). The coating system reduces adhesive wear and helps preserve the cutting edge under continuous operation, which translates into longer intervals between indexings and fewer insert changes. This results in predictable productivity gains and reduced process variability for repetitive drilling and boring tasks. Geometry that balances strength and surface result The square 90° SCMT geometry with a 0.4 mm corner radius provides a robust cutting edge that resists chipping while delivering a consistent workpiece finish. The 7° clearance (relief) angle reduces friction at the flank and supports stable cutting forces during bore enlargement or pilot-drilling tasks. The tolerance class M ensures interchangeability in standard toolholders and helps maintain repeatable tool setting and run-out control, which is essential for high-accuracy batches. Practical application guidance and compatibility This insert is specified for operations in steel and is suitable where a universal, wear-resistant grade is required. The chipbreaker E47 geometry supports controlled chip fragmentation in the typical chip formation patterns of unalloyed and alloyed steels, reducing the risk of built-up edge. When selecting cutting parameters, follow established recommendations for coated carbide in steel and consider moderate feeds to exploit the edge strength offered by the 0.4 mm radius; trial cuts in representative material are advised to validate finish and cycle time. For procurement or technical assistance with SCMT060204-E47 WPP20S, contact Metav Werkzeuge for tailored recommendations and secure supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SCMT060204-E47-WPP20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte SCMT060204-E47 WPP20S Walter Tools Designation: SCMT060204-E47 Grade: WPP20S Series: Tiger·tec Silver Manufacturer: Walter Tools Execution: T Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coated carbide (Tiger·tec Silver) Chipbreaker: E47 Suitable for machining steel (ISO P) Robust cutting edge for stable chip formation FAQ What materials is this insert intended for? The SCMT060204-E47 WPP20S insert is formulated for machining steel (ISO P group) and its WPP20S grade is optimised for the thermal and chip-formation characteristics of these materials. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the Walter Tools insert reduces adhesive and abrasive wear, preserving the cutting edge and extending tool life under typical steel machining conditions. Which toolholders accept this insert form? The SCMT square 90° geometry and tolerance class M make the insert compatible with standard indexable toolholders designed for SCMT-format inserts; confirm seat and clamp compatibility with the chosen holder. What does the 0.4 mm corner radius affect in machining? A 0.4 mm corner radius increases edge strength and resistance to chipping, improving robustness during interrupted cuts and promoting a consistent surface finish in bore enlargement operations. Is the chipbreaker E47 suitable for continuous boring operations? Yes, the E47 chipbreaker promotes controlled chip segmentation for typical steel chip forms and supports continuous boring and drilling cycles when paired with appropriate feeds and speeds. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is original, factory-new goods from Walter Tools.
SCMT060204-E47 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM10S grade ensures secure chip formation and extended edge life when machining stainless steels and heat‑resistant superalloys; the square 90° geometry with a 0.4 mm corner radius provides consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. SCMT060204-E47 WSM10S drilling/boring indexable insert, Tiger·tec Silver by Walter Tools The SCMT060204-E47 WSM10S is a square indexable insert designed for drilling and boring tasks in stainless steel and heat‑resistant superalloys, optimised for stable cutting and secure chip control. Tiger·tec Silver coated carbide grade Suitable for stainless steel and superalloys 7° clearance angle for stable cutting 0.4 mm corner radius for improved surface finish High‑performance grade for demanding materials The coated carbide WSM10S grade, part of the Tiger·tec Silver family, is tailored for machining stainless steels and heat‑resistant superalloys. Its coating and substrate combination improves resistance to thermal loading and supports stable chip formation, which reduces the risk of built‑up edge and unexpected tool failure. For production environments where component quality and repeatability matter, this grade provides a measurable improvement in process stability while maintaining tool life under challenging conditions. Geometry and edge design that enhance reliability A 7° clearance angle combined with a 0.4 mm corner radius and the square 90° insert form delivers a balance between edge robustness and surface finish. The modest clearance angle reduces flank contact and heat generation, while the corner radius helps distribute cutting forces and avoids premature chipping. The specified E47 chipbreaker geometry supports predictable chip control in interrupted cuts and variable depths, leading to fewer process interruptions and a cleaner swarf flow in automatic machining centres. Practical advantages across production workflows Using this insert in appropriate toolholders for boring and drilling brings practical benefits: consistent component tolerances, reduced rework, and improved uptime through longer edge life. The insert’s designation and size make it compatible with established clamping systems for square inserts, simplifying inventory and changeover. For engineers specifying tooling solutions, the combination of grade, chipbreaker and geometry enables a clear trade‑off between surface quality and tool robustness, particularly when machining tough, heat‑retaining materials. For technical advice on using Walter Tools Tiger·tec Silver inserts or to order the SCMT060204-E47 WSM10S directly through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: SCMT060204-E47-WSM10S-WALTER Article name: Bohr-/Aufbohrwendeschneidplatte SCMT060204-E47 WSM10S Walter Tools Manufacturer: Walter Tools SKU: SCMT060204-E47-WSM10S-WALTER Core data Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Grade/series: WSM10S, Tiger·tec Silver Coated carbide Chipbreaker: E47 Application: stainless steel and heat‑resistant superalloys Designation: SCMT060204-E47 WSM10S FAQ What materials is this insert suitable for? The SCMT060204-E47 WSM10S insert is suitable for stainless steel and heat‑resistant superalloys, reflecting the WSM10S grade’s focus on secure chip formation and edge stability. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM10S grade increases thermal resistance and reduces adhesion on the cutting edge, which improves performance when machining high‑temperature alloys and stainless steels. What does the E47 chipbreaker provide? The E47 chipbreaker supports predictable chip control in interrupted cuts and variable depths, helping maintain consistent swarf evacuation and reducing the risk of chip entanglement. Is this insert compatible with standard square insert toolholders? Yes, the SCMT060204-E47 follows common square‑insert geometries (90°), making it compatible with established toolholding systems designed for this insert form. What does the tolerance class M indicate? Tolerance class M designates the insert’s dimensional tolerance standard suitable for metalcutting operations where consistent fit and repeatability in the clamping seat are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT060204-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of advanced coating technology, stable chip control and precise edge geometry for consistent productivity in demanding drilling and reaming operations; order the SCMT060204-E47 WSM20S insert directly via Metav Werkzeuge or consult their specialists if required. SCMT060204-E47 WSM20S drilling/reaming indexable insert (for stainless steel & superalloys) — Walter Tools The SCMT060204-E47 WSM20S is a square 90° indexable insert engineered for drilling and reaming applications, optimised for rostfreiem Stahl and heat‑resistant superalloys in high‑demand industrial machining. *Tiger·tec Silver coating for high-temp performance *Designed for stainless steels and superalloys *Square 90° insert with 0.4 mm corner radius *7° relief angle for secure chip control High‑temperature performance and reliable chip control The insert uses the Tiger·tec Silver coating combined with the WSM20S grade to deliver enhanced thermal stability and wear resistance when machining rostfreiem Stahl and heat‑resistant alloys. This combination supports stable chip formation and a secure cutting edge under elevated temperatures, reducing the frequency of tool changes and keeping cycle times predictable. The integrated E47 chipbreaker promotes controlled chips in interrupted or continuous drilling and reaming passes, which helps prevent built‑up edge and enhances process reliability even in challenging materials. Geometry designed for edge strength and dimensional stability A square 90° plate form with a 0.4 mm corner radius and a 7° relief angle creates a robust cutting geometry that balances edge strength with heat evacuation. The modest corner radius increases resistance to chipping while preserving the ability to achieve accurate hole profiles, and the relief geometry supports repeatable seating in the toolholder. These characteristics translate into consistent hole quality and fewer rejects in series production, particularly where hole tolerances and surface finish matter. Productivity gains and predictable tool life The coated, grade‑specific construction focuses on long effective life and reduced downtime. The combination of coating and substrate chemistry improves wear resistance and maintains a sharp cutting line over extended runs, which contributes directly to higher uptime and lower per‑part tooling costs. Process engineers benefit from the predictable wear behaviour: once cutting parameters are optimised for the insert and the workpiece group, machining can proceed with fewer interruptions and more consistent output. Application scope and practical recommendations This insert is intended for use in drilling and reaming tool bodies and is suitable for workpiece groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium) as defined in ISO 513. The design supports both continuous and interrupted machining where thermal loads are high. For best results, match the insert geometry and chipbreaker to the toolbody and machining strategy, adjust cutting speeds to the grade’s recommendations and verify coolant strategy where applicable. For complex assemblies or unusual alloys, a short feasibility check is advisable before large runs. Contact Metav Werkzeuge for precise application advice on the Walter Tools SCMT060204-E47 WSM20S insert: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability, cutting data and availability Technical data Article number: SCMT060204-E47-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte SCMT060204-E47 WSM20S Walter Tools Designation: SCMT060204-E47 Grade: WSM20S Series/coating: Tiger·tec Silver Chipbreaker: E47 Facts Plate form: Square 90° Plate size: 06 Corner radius: 0.4 mm Plate thickness: 02 Relief angle: 7° Tolerance class: M Special features Suitable for rostfreiem Stahl (workpiece group M) Suitable for heat‑resistant superalloys/titanium (workpiece group S) Coated carbide grade for elevated temperatures Robust edge geometry for productive drilling/reaming FAQ What materials is this insert suitable for? The SCMT060204-E47 WSM20S insert is designed for rostfreie Stähle (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering secure chip formation and edge stability in these materials. Which chipbreaker does the insert use and why is it important? This insert features the E47 chipbreaker; it controls chip flow during drilling and reaming to reduce built‑up edge and improve hole quality, especially in rostfreiem Stahl and difficult alloys. How does the Tiger·tec Silver series benefit holemaking operations? Tiger·tec Silver provides enhanced thermal resistance and wear protection, leading to longer tool life, fewer interruptions and more consistent surface finishes in high‑temperature drilling and reaming. Is this insert compatible with standard drilling tool bodies? The geometry (square 90°) and designation match common indexable insert tool systems for drilling/reaming; toolbody compatibility should be verified against the SCMT060204-E47 seat and clamping specifications. What cutting data adjustments are recommended for stainless steels? Due to the toughness and heat generation of rostfreie Stähle, moderate cutting speeds with controlled feed and effective chip evacuation are recommended; consult Metav Werkzeuge or technical datasheets for precise parameters. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and registered trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new material from the manufacturer.
SCMT060204-E47 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM30S grade and a 7° relief for consistent chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult the Metav team for tailored machining recommendations. SCMT060204-E47 WSM30S — Drilling/Boring indexable insert, Tiger‑tec Silver, for stainless steels (Walter Tools) The SCMT060204-E47 WSM30S is a square 90° indexable insert designed for drilling and boring applications, optimised to deliver stable cutting performance in stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for improved wear resistance WSM30S grade for stainless steels and superalloys 7° relief angle for stable cutting edge Square 90° form with 0.4 mm corner radius Consistent performance in difficult materials The combination of Tiger‑tec Silver coating and the WSM30S graded, coated carbide substrate provides a robust balance between wear resistance and edge stability when machining stainless steels and superalloys. The coating reduces flank wear and supports a consistent cutting edge, which in practice means fewer index changes and more predictable cycle times. The insert construction is particularly beneficial where heat build‑up and workpiece toughness typically reduce tool life; the result is improved component repeatability and lower overall process costs. Geometry that supports secure chip control and surface quality A square 90° insert form together with the E47 chipbreaker promotes controlled chip formation in interrupted cuts and continuous boring passes. The modest 0.4 mm corner radius balances edge strength and surface finish, reducing the risk of built‑up edge while still enabling acceptable roughness on demanding workpieces. The 7° relief angle helps maintain a stable cutting edge under high temperatures common in machining stainless and heat‑resistant alloys, supporting consistent dimensional accuracy and improved component integrity. Practical application guidance and machining benefits This insert is intended for operations where a stable cutting edge and reliable chip evacuation are essential. The WSM30S grade is tuned for the thermal and mechanical challenges of stainless steels and temperature‑resistant alloys, allowing higher cutting forces and moderate speeds without premature wear. In shop practice, selecting appropriate coolant strategies and modest DOC values enhances the coated insert’s lifetime; the coating’s heat resistance further supports extended tool life and more productive tool indexing schedules. Integration, handling and process advantages The insert’s ISO designation and compact size make it compatible with standard toolholders designed for SCMT inserts, facilitating quick integration into existing drilling and boring setups. The coated carbide construction and Tiger‑tec Silver series design reduce unexpected downtime through longer index life and stable cutting behaviour. For operations aiming to improve throughput while keeping quality high, this insert offers a pragmatic route to process stabilisation and lower unit machining costs. For customised advice on holder selection, cutting data or process integration, contact Metav Werkzeuge for dedicated support and ordering assistance. Technical Data Article number: SCMT060204-E47-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte SCMT060204-E47 WSM30S Walter Tools Manufacturer: Walter Tools Product type: Drilling/Boring indexable insert Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Square 90° Insert size code: 06 Thickness code: 02 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM30S (coated carbide) Chipbreaker: E47 Material suitability: S / M (superalloys / stainless steels) ISO designation: SCMT060204-E47 WSM30S FAQ What materials is this insert suitable for? The SCMT060204‑E47 WSM30S insert (Walter Tools) is suitable for stainless steels and heat‑resistant superalloys, as indicated by its S/M material suitability. Which chipbreaker is used and what does it do? The insert features the E47 chipbreaker, which supports reliable chip formation and evacuation during drilling and boring operations, enhancing surface finish and process stability for the WSM30S grade. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating provides improved wear resistance and thermal stability, which together extend index life and reduce flank wear when machining tough, heat‑generating materials. Is the insert compatible with standard SCMT holders? Yes; the ISO designation SCMT060204 indicates compatibility with standard toolholders designed for SCMT‑type square inserts, enabling straightforward integration into existing tooling systems. What role does the 0.4 mm corner radius play? A 0.4 mm corner radius improves edge strength and contributes to a consistent surface finish while limiting the tendency for built‑up edge on demanding materials. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com