SCMT09T308-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of WEP10C cermet for consistent edge life and the FP4 chipbreaker for stable chip formation; the combination supports reliable finishing and predictable process results, so order directly via Metav Werkzeuge or consult the technical team for application advice. SCMT09T308-FP4 WEP10C — Indexable turning insert (FP4 chipbreaker, 0.8 mm radius) by Walter Tools SCMT09T308-FP4 WEP10C is an indexable turning insert engineered for precision finishing and controlled chip formation in conventional and semi-finishing turning operations. Cermet grade WEP10C for fine finishes FP4 chipbreaker for stable chip control 0.8 mm corner radius for edge strength 7° clearance angle for low cutting forces Delivering consistent finish and extended edge life The SCMT09T308-FP4 WEP10C is designed to deliver consistent surface quality and extended edge stability in medium-speed turning applications. The WEP10C cermet grade combines thermal resistance with a fine-grained cutting edge, which supports repeatable finishes on demanding workpieces. Where surface quality and tool life affect downstream processes, the insert’s geometry reduces the need for rework and contributes to predictable cycle times. The 0.8 mm corner radius balances robustness with the ability to maintain fine contours, making it suitable for finishing passes where dimensional tolerance and appearance matter. Predictable chip control that improves process reliability Stable chip formation is central to efficient production; the FP4 chipbreaker on this insert helps produce compact, controllable chips that evacuate reliably at typical cutting parameters. With a 7° clearance angle, cutting forces are reduced and heat generation at the cutting edge is moderated, which in turn reduces flank wear and helps maintain part tolerances over longer runs. The chip control and geometry together enhance machine uptime by lowering the risk of chip-related interruptions, supporting a leaner production flow and fewer unscheduled tool changes. Easy integration into existing toolholders and quality workflows The insert’s square 90° form and standard format make it straightforward to integrate into common toolholder systems used across turning operations. Marked tolerance class M and the designation T3 thickness ensure predictable seating and repeatable indexability, which simplifies tool management and inventory control. For process validation, the insert’s behaviour is compatible with standard finishing strategies; the combination of cermet cutting material and specifically tuned chipbreaker supports both manual setup and automated optimisation routines in production environments. For detailed application advice on Walter Tools’ Walter Cermet grade and to confirm suitability for specific materials, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will recommend the optimal cutting data and holder combination for the SCMT09T308-FP4 WEP10C. Technical data SKU: SCMT09T308-FP4-WEP10C-WALTER Product: Indexable turning insert Series: Walter Cermet Grade: WEP10C Chipbreaker: FP4 Geometry: Square 90° Form/Execution: T Designation: SCMT09T308-FP4 Key measurements Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Size designation: 09 Tolerance class: M Materials & special features Cermet cutting material (WEP10C) FP4 chipbreaker for stable chips Square 90° insert form for versatile turning Series: Walter Cermet Material specification: catalogue dependent FAQ What types of turning operations suit this insert best? The insert is optimised for finishing and semi-finishing turning; the SCMT09T308-FP4 WEP10C excels where surface finish and dimensional stability are priorities, thanks to its cermet grade and FP4 chipbreaker. Which materials can be processed with the WEP10C grade? Material suitability should be checked against the product matrix, but WEP10C is a cermet grade designed for fine finishes and is typically used on materials where thermal resistance and a sharp edge are beneficial. How does the FP4 chipbreaker affect productivity? The FP4 chipbreaker produces compact, predictable chips that reduce the risk of entanglement and machine stoppages, improving process reliability and decreasing unplanned tool interventions when using the insert. Is the insert compatible with standard toolholders? Yes. The square 90° form and tolerance class M mean the insert fits common toolholder systems; verify holder compatibility and clamping method before final assembly for best results. What documentation is available for cutting data? Cutting data and recommendations can be provided by Metav Werkzeuge; consult the technical team for specific parameters tailored to the workpiece material and machine conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SCMT09T308-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating, the FP4 chipbreaker and the square 90° geometry with a 0.8 mm corner radius to secure stable chip control and long tool life in steel and cast iron operations; order the SCMT09T308-FP4 WKP01G directly via Metav Werkzeuge or request application support from their consultants. SCMT09T308-FP4 WKP01G turning indexable insert for steel and cast iron — Walter Tools SCMT09T308-FP4 WKP01G is a square 90° turning insert designed for productive medium-duty turning of steels and cast iron in industrial machining environments. Tiger·tec Gold coating for long tool life Optimised FP4 chipbreaker for stable chips Square 90° geometry with 0.8 mm corner radius Suitable for steel and cast iron machining Enhanced wear resistance from advanced coating technology The combination of Tiger·tec Gold coating and the WKP01G grade gives a robust, wear-resistant cutting edge that reduces flank wear and maintains dimensional stability over extended runs. This coating technology is engineered to manage the heat and abrasive conditions typical when machining steel and cast iron, so the insert sustains cutting performance under higher thermal loads. By choosing a coated cemented carbide grade tuned for these materials, process reliability increases and tool change intervals are extended, which supports predictable production planning and lower total machining cost. Predictable chip formation and improved surface quality The FP4 chipbreaker is configured to produce short, controllable chips with consistent chip flow, reducing the risk of tangled chips and unexpected interruptions. Stable chips limit vibration and help maintain a better finish on the workpiece, so one can expect more consistent component surfaces and fewer rework cycles. For machining environments where repeatability and process security are critical, the chip control geometry directly contributes to cycle-time reduction and steady productivity. Robust geometry for versatile turning applications The square 90° form with a 0.8 mm corner radius and 7° clearance angle delivers a balanced mix of strength and versatility. The larger corner radius supports effective engagement in turning passes that require a stronger cutting edge, while the square format offers four usable cutting edges per insert for economical tool usage. The tolerance class M and T3 thickness ensure consistent seat fitment and stable clamping in compatible toolholders, simplifying tool management on the shop floor and minimising setup variability. Practical advantages for shop-floor integration This insert is produced by Walter Tools under the Tiger·tec Gold series and is catalogued as SCMT09T308-FP4 WKP01G, making it straightforward to specify for procurement and tool lists. Compatibility with ISO group P (steel) and K (cast iron) means clear material guidance for process planners and operators. Metav Werkzeuge provides technical advising and product availability for straightforward replacement strategies and process optimisation, helping workshops to integrate these inserts without disrupting existing tool systems. For tailored recommendations and stock enquiries, contact Metav Werkzeuge for application advice and reliable supply of Walter Tools SCMT09T308-FP4 WKP01G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: SCMT09T308-FP4-WKP01G-WALTER Designation: SCMT09T308-FP4 WKP01G Product type: Turning indexable insert Series: Tiger·tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Size: 09 Geometry: Square 90° Clearance angle: 7° Corner radius: 0.8 mm Thickness: T3 Tolerance class: M Special features Chipbreaker: FP4 Coated cemented carbide grade (Tiger·tec Gold) Suitable for: steel (P) and cast iron (K) according to ISO 513 Application: Turning Format: four-edged square insert FAQ What materials is the SCMT09T308-FP4 WKP01G best suited for? The SCMT09T308-FP4 WKP01G insert is optimised for steel (ISO group P) and cast iron (ISO group K), offering tailored wear resistance and chip control for these material families. Which chip behaviour can be expected with the FP4 chipbreaker? The FP4 chipbreaker produces short, controlled chips and consistent chip flow, which supports stable cutting conditions and improved surface finish when using the SCMT09T308-FP4 WKP01G insert. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for productive turning passes and provides a compromise between tool robustness and surface quality, extending tool life in many medium-duty operations. Is this insert compatible with standard toolholders? Yes, the geometry and tolerance class M ensure reliable seat fitment in compatible toolholders designed for SCMT-style square inserts; confirmation with the toolholder specification is recommended. How many cutting edges are available on this insert format? The square 90° format offers four usable cutting edges per insert, which improves economy and reduces tooling replacement frequency in production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SCMT09T308-FP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, reliable FP4 chip control, and the sturdy square 90° geometry for consistent steel turning results; order directly via Metav Werkzeuge or consult our specialists for application advice. SCMT09T308-FP4 WPP10G indexable turning insert – Square 90°, 7° clearance, for steel | Walter Tools SCMT09T308-FP4 WPP10G is a coated indexable insert designed for turning operations on steel, delivering a balance of wear resistance and toughness for productive industrial machining. Tiger·tec Gold coated carbide WPP10G Square 90° insert with 0.8 mm corner radius 7° clearance angle for general steel turning Chipbreaker FP4 for controlled chip formation Engineered for dependable steel turning performance The indexable insert is built on the Tiger·tec Gold platform and the WPP10G grade, which combine a coated carbide substrate with tailored surface technology to extend tool life when machining steels (ISO P). The result is reliable thermal and mechanical resistance during typical turning cycles, which reduces the need for frequent insert changes. With a tolerance class of M and a standard T3 thickness, the geometry supports repeatable seating and stable cutting forces in production environments, improving process consistency and part quality. Consistent chip control and improved surface finish Equipped with the FP4 chipbreaker, the insert actively manages chip flow and breakage, reducing the risk of entangling or long curl formation during medium-duty turning of steels. The modest 0.8 mm corner radius helps to distribute cutting forces over a larger edge, yielding a better surface finish and longer edge life under interrupted cuts. The 7° clearance reduces rubbing on the flank face, lowering heat build-up and helping to maintain dimensional accuracy across runs, which is particularly beneficial in batch production and automated turning cells. Geometry and mounting that support productivity The Square 90° form and size designation 09 allow straightforward integration into common turning toolholders for square inserts, offering flexibility across a range of external and internal turning applications. The insert’s standardised dimensions and tolerance class M ensure predictable fit and repeatability when indexed, which reduces setup time and minimises variations between tool changes. These design attributes contribute to stable chip loads and enable higher average cutting speeds while maintaining component tolerances. Coating technology that lengthens uptime and economy The Tiger·tec Gold coating technology emphasises both wear resistance and toughness, delivering a balance that suits mixed steel grades encountered in daily production. This performance reduces the frequency of insert exchange and contributes to lower overall tooling costs per part. Using a coated grade optimised for P-group materials supports higher metal removal rates and consistent edge integrity, which in turn improves machine utilisation and lowers operating costs over a production cycle. For reliable, high-productivity turning with the Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCMT09T308-FP4-WPP10G-WALTER Designation: SCMT09T308-FP4 WPP10G Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 7° Insert size: 09 Thickness: T3 Shape: Square 90° Tolerance class: M Special features Chipbreaker: FP4 Coating: Tiger·tec Gold (coated carbide) Suitable for: Steel (ISO P) Application: general turning of steel Series properties: wear resistance and toughness balance FAQ What materials is the SCMT09T308-FP4 WPP10G designed for? The SCMT09T308-FP4 WPP10G insert is formulated for machining steels (ISO P), providing a balance of wear resistance and toughness appropriate for unalloyed and alloy steels. How does the FP4 chipbreaker benefit machining? The FP4 chipbreaker on the SCMT09T308-FP4 WPP10G promotes controlled chip formation and reliable evacuation, which reduces the risk of chip-related interruptions during turning of steel components. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius on the SCMT09T308-FP4 WPP10G spreads cutting loads over a larger edge, improving surface finish and edge stability, especially under interrupted or moderate cutting conditions. Is the insert compatible with common toolholders for square inserts? Yes; the Square 90° form and size 09 of the SCMT09T308-FP4 WPP10G match standard toolholders for square indexable inserts, enabling straightforward mounting and repeatable positioning. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the SCMT09T308-FP4 WPP10G enhances wear resistance while maintaining toughness, which lengthens edge life and supports consistent performance when turning steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer.
SCMT09T308-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, reliable FP4 chip control and a 0.8 mm corner radius for stable steel turning and predictable tool life; order the insert directly via Metav Werkzeuge or contact the technical consultants for application advice. SCMT09T308-FP4 WPP20G square 90° turning insert – coated carbide for steel applications (Walter Tools) The SCMT09T308-FP4 WPP20G is a square 90° indexable insert designed for steel turning, combining a wear-resistant Tiger·tec Gold coating with a medium-duty chipbreaker for consistent machining performance. Tiger·tec Gold coated carbide FP4 chipbreaker for reliable chip control Suitable for steel (ISO P) applications Square 90° insert, corner radius 0.8 mm Consistent tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade delivers high wear resistance and thermal stability, which translates into longer tool life and fewer insert changes during production. The grade is a coated carbide developed for typical steel machining conditions (ISO P), offering a balance between wear resistance and toughness—described in the manufacturer data as 10 for wear-resistant, 20 for universal and 30/35 for toughness. This balance reduces unexpected tool failures and supports predictable process planning, which in turn lowers overall machining costs and improves throughput. Predictable chip control and surface quality with FP4 The FP4 chipbreaker is optimised for general steel turning and promotes controlled chip formation across a range of feeds and depths of cut. Controlled chips reduce the risk of re-cutting and improve surface finish, allowing for more consistent downstream processes and less manual rework. The insert’s corner radius of 0.8 mm contributes to edge strength and influences the final component finish; a larger radius increases robustness, whereas the selected 0.8 mm is a compromise that supports both strength and acceptable surface integrity for many turning tasks. Tool geometry designed for rigidity and versatility The square 90° shape provides four indexable cutting edges per insert and a stable seating for axial and radial loads. The 7° relief angle lowers flank contact and heat generation at the cutting zone, which helps maintain dimensional accuracy on longer-running operations. This geometry suits typical medium- to heavy-duty steel turning operations where stability and repeatability are priorities. The insert designation indicates the format and chipbreaker clearly, enabling straightforward tool selection for production planners and buyers. Practical benefits for production and planning Using an insert from the Tiger·tec Gold family with the WPP20G grade and FP4 chipbreaker supports a reduction in process variability, fewer tool changes and more consistent batch quality. For production managers, this means better utilisation of machine time and simplified inventory management due to the insert’s universal applicability across many steels. For operators, predictable chip behaviour and a robust edge reduce interruptions and improve safety at the machine. For tailored selection of Walter Tools Tiger·tec Gold inserts and to ensure the SCMT09T308-FP4 WPP20G fits the intended steel application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast supply Technical Data Article number: SCMT09T308-FP4-WPP20G-WALTER Designation: SCMT09T308-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: FP4 Grade: WPP20G Coating/Material: coated carbide (Tiger·tec Gold) Intended material group: ISO P (steel) Execution: T FAQ What materials is this insert intended for? The SCMT09T308-FP4 WPP20G from Walter Tools is specified for the ISO P material group and is intended primarily for machining steel. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker provides controlled chip formation for general steel turning, improving surface finish and reducing the risk of recutting. What benefits does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, which helps extend tool life in steel machining. Is the corner radius suitable for finishing passes? The 0.8 mm corner radius offers a compromise between edge strength and surface quality; it is suitable for many semi-finish and general finishing operations but may be adjusted according to final surface requirements. How many cutting edges are available per insert and what is the seating geometry? The square 90° geometry provides four indexable cutting edges per insert and a stable seat for axial and radial loads, supporting robust turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
SCMT09T308-FP6 WPP20G FP6 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, secure FP6 chip control and compact geometry for consistent turning of steel components; order directly via Metav Werkzeuge or consult our team for application advice. SCMT09T308-FP6 WPP20G turning insert — Tiger·tec Gold coating, 7° clearance | Walter Tools A robust square turning insert designed for efficient steel machining with a Tiger·tec Gold coated carbide grade and optimised FP6 chipbreaker for reproducible results Tiger·tec Gold coated carbide Optimised FP6 chip control Suited for steel machining 0.8 mm corner radius and 7° clearance Consistent performance for steel turning The SCMT09T308-FP6 WPP20G is engineered to deliver reproducible outcomes when machining steels. The combination of the WPP20G coated carbide grade and the FP6 chipbreaker provides stable chip formation, reducing workpiece and tool vibration. This geometry suits common turning operations on unalloyed and alloyed steel, where thermal load and chip evacuation are decisive for process stability. The square 90° format and the 0.8 mm corner radius are optimised for a balance between edge strength and achievable surface finish, while the 7° clearance angle assists in maintaining cutting edge integrity under moderate cutting forces. Geometry and coating that improve productivity A focus on measurable benefits: the Tiger·tec Gold coating improves wear resistance and edge life compared with conventional grades, which translates into fewer insert changes and more uptime on the lathe. The coated carbide substrate is tailored for the thermal and mechanical demands typical of steel machining, enabling a cost-effective trade-off between productivity and tool life. The FP6 chipbreaker is designed to produce controllable chip shapes across a range of cutting parameters, simplifying downstream handling and reducing manual chip management during series production. Application guidance and process integration This insert is intended primarily for turning applications on steel, following ISO classifications for material group P. The compact plate size and square 90° form allow flexible use in finishing and light to medium roughing, with the 0.8 mm radius supporting reproducible edge conditions. For best results, pair the insert with a matching toolholder and establish cutting data aligned to the workpiece alloy and hardness; adjustments to feed and speed will refine surface quality and tool life. If supplementary technical data or cutting tables are required, Metav Werkzeuge provides detailed guidance and can advise on optimal parameters for specific steels and production settings. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to discuss suitable cutting data for production requirements Technical data Article number: SCMT09T308-FP6-WPP20G-WALTER Designation: SCMT09T308-FP6 WPP20G Product type: Drehwendeschneidplatte / turning insert Series: Tiger-tec Gold Grade: WPP20G Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: FP6 Coating: Tiger·tec Gold (coated carbide) Material application: Steel Execution: T Geometry: Quadrant for robust edge strength FAQ Which materials is this insert suitable for? The insert is designed for machining steel in accordance with ISO group P; the WPP20G grade and FP6 chipbreaker support typical chip formation and thermal loads encountered when turning steels. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this turning insert improves wear resistance and edge life, resulting in reduced insert changes and increased process stability during longer production runs. How does the FP6 chipbreaker affect machining? The FP6 chipbreaker produces controlled chip forms across a range of feeds and speeds, easing chip disposal and helping to maintain consistent surface quality in turning operations. Is the 0.8 mm corner radius suitable for finishing? The 0.8 mm radius offers a compromise between edge robustness and achievable surface finish, making it suitable for finishing and light to medium roughing on steel components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods of the manufacturer. Walter AG (brand appearance: Walter Tools) is a recognised manufacturer of precision tools for metalworking and forms part of the Sandvik group.
SCMT09T308-MK4 WKK10S Wendeplatten - Walter Tools
The combination of a Tiger‑tec Silver coated grade and a purpose‑built MK4 chipbreaker ensures efficient, repeatable machining of abrasive cast‑iron grades while maintaining tool life and process stability; order the SCMT09T308-MK4 WKK10S inserts directly via Metav Werkzeuge or ask the consultants for specific machining parameters. SCMT09T308-MK4 WKK10S — Indexable turning/boring insert for cast iron (Tiger‑tec Silver) | Walter Tools The SCMT09T308-MK4 WKK10S is an indexable turning and boring insert engineered for productive cast‑iron machining, combining a Tiger‑tec Silver coating with an MK4 chipbreaker and a 0.8 mm corner radius for consistent surface finish and chip control Tiger‑tec Silver coated carbide grade Optimised for cast iron (K materials) MK4 chipbreaker for stable chip control 0.8 mm corner radius, 7° relief angle Higher throughput from advanced coating technology The Tiger‑tec Silver coating delivers a balance of wear resistance and thermal stability that translates directly into longer cutting edge life and fewer tool changes. For abrasive workpieces like cast iron, the WKK10S grade is formulated to resist abrasive wear and accommodate the often short, brittle chips typical of these materials. The result is improved process reliability and reduced downtime, which supports continuous production runs and predictable maintenance intervals. Consistent chip formation and surface quality The combination of the MK4 chipbreaker and a square 90° insert geometry provides controlled chip formation and evacuation in interrupted and continuous cuts. With a 0.8 mm corner radius and a 7° relief angle, the insert offers a robust cutting edge that helps maintain dimensional stability and surface finish. The insert geometry reduces the risk of built‑up edge and promotes regular chip breaking, which eases handling and minimises cycle interruptions on the shop floor. Practical benefits for workshop integration The insert thickness (T3) and compact 09 size make it suitable for a range of toolholders and tool‑post arrangements used in turning and boring operations. The grade’s focus on cast‑iron applications simplifies tooling decisions where abrasive wear and short chips dominate. Where process windows are tight, the coated grade and chipbreaker combination deliver a predictable compromise between productivity and tool life, enabling operations to plan inserts per component batch with confidence. Application guidance and process advice For optimal results in cast‑iron turning, select cutting parameters consistent with abrasive material behaviour: moderate cutting speeds and controlled feeds to exploit the WKK10S wear resistance while keeping cutting temperatures manageable. The insert’s design supports interrupted cuts and varying depths of cut; for unfamiliar setups, recommend a brief trial cut to establish the machine‑specific settings. Technical enquiries and cutting data requests can be directed to Metav Werkzeuge for tailored recommendations. Contact Metav Werkzeuge for machining advice and to secure Walter Tools SCMT09T308-MK4 WKK10S inserts tailored to cast‑iron applications Technical Data Article number / SKU: SCMT09T308-MK4-WKK10S-WALTER Designation: SCMT09T308-MK4 WKK10S Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: MK4 Numbers / Core technical data Insert size: 09 Plate form: Square 90° Corner radius: 0.8 mm Relief (free) angle: 7° Thickness: T3 Tolerance class: M Special features / Versions Coating: Tiger‑tec Silver Material class suitability: Cast iron (K) Application: Indexable turning and boring Manufacturer: Walter Tools FAQ What materials is this insert designed for? The SCMT09T308-MK4 WKK10S is specifically developed for cast iron applications and is optimised for abrasive, short‑chip conditions typical of that material group. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKK10S grade improves wear resistance and thermal stability, which extends cutting edge life and supports higher process reliability in abrasive cast‑iron work. Which chipbreaker should be expected and what is its effect? This insert features an MK4 chipbreaker that promotes stable chip fragmentation and evacuation, reducing the risk of chip entanglement and improving surface finish consistency during turning operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
SCMT09T308-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, optimized wear resistance and straightforward indexable design for efficient cast iron turning; order Walter Tools inserts via Metav Werkzeuge or consult our specialists for application advice. SCMT09T308-MK4 WKK20S turning insert for cast iron, square 90° — Walter Tools A SCMT09T308-MK4 WKK20S indexable turning insert engineered for productive cast iron machining with Tiger·tec Silver coating. Tiger·tec Silver coated grade WKK20S Optimised for cast iron (ISO group K) Square 90° geometry, 0.8 mm corner radius MK4 chipbreaker for reliable chip control Boosted productivity for abrasive cast iron work The insert combines a Tiger·tec Silver coating with the WKK20S grade to deliver improved wear resistance specifically for cast iron. This combination reduces flank and crater wear under the short, brittle-chip conditions typical of grey and nodular cast irons, enabling longer cutting intervals and fewer index changes. The result is a measurable increase in productivity on serial and batch turning operations, with a stable cutting behaviour that supports consistent cycle times. Stable chip control and secure edge performance The integrated MK4 chipbreaker is designed to shape and evacuate short chips reliably, lowering the risk of built-up edge and interrupted cuts. Coupled with the square 90° geometry and a 0.8 mm corner radius, the insert provides a robust cutting edge that tolerates interrupted cuts and secures process reliability. The moderate 7° clearance angle further supports edge strength while maintaining acceptable cutting forces, so machinists benefit from repeatable surface quality and fewer rejects. Practical economy through easy indexing and broad applicability As an indexable solution, the insert keeps maintenance times low and toolholding costs manageable: four usable edges reduce per-edge expenses and shorten downtime for replacements. The coated carbide substrate and chipbreaker pairing make the component versatile across standard cast iron turning tasks, from roughing to finishing passes where stable edge life and surface consistency are priorities. Specification and selection are straightforward for production planners seeking process stability and predictable tool life. For reliable cast iron turning with Walter Tools quality, contact Metav Werkzeuge for application guidance or to order matching cutters and inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed support. Technical Data Article number: SCMT09T308-MK4-WKK20S-WALTER Designation: SCMT09T308-MK4 WKK20S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Corner radius: 0.8 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: MK4 Material application: cast iron (ISO K) Geometry: square 90° FAQ Which materials is this insert best suited for? The SCMT09T308-MK4 WKK20S insert by Walter Tools is optimised for cast iron (ISO group K) machining thanks to its Tiger·tec Silver coated carbide and chipbreaker design. What advantages does the Tiger·tec Silver grade provide? Tiger·tec Silver in the WKK20S grade improves wear resistance and edge stability on abrasive cast iron, supporting longer service intervals and consistent surface finish during turning. How does the MK4 chipbreaker affect performance? The MK4 chipbreaker produces short, controllable chips that reduce the likelihood of chip entanglement and built-up edge, improving process reliability for Walter Tools turning inserts. Is the geometry suitable for interrupted cuts? Yes—the square 90° form with a 0.8 mm corner radius and 7° clearance angle offers a robust edge that tolerates interrupted cuts and roughing applications. Can this insert be used for finishing passes? The insert’s coated carbide grade and controlled chip formation permit use in finishing operations where stable tool life and repeatable surface quality are required. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SCMT09T308-MM4 WMP20G MM4 Wendeplatten - Walter Tools
Efficient machining of stainless steel is achieved by combining the Tiger·tec Gold coating and a robust MM4 chipbreaker, delivering stable chip formation and extended tool life; this insert also offers a 0.8 mm corner radius and a 7° relief for reliable edge performance. Order the SCMT09T308-MM4 WMP20G directly via Metav Werkzeuge or ask our consultants for application support and process optimisation. SCMT09T308-MM4 WMP20G — Drilling/boring and turning indexable insert, Tiger·tec Gold, Walter Tools The SCMT09T308-MM4 WMP20G is a square 90° indexable insert engineered for turning and boring tasks in stainless steel, combining a coated carbide grade with a specific chipformer for consistent machining under medium to robust conditions. Tiger·tec Gold coated for long life MM4 chipbreaker for stable chip control 0.8 mm corner radius for robust edges 7° relief angle for demanding stainless steel Stable chips and improved surface quality through optimised geometry The Tiger·tec Gold technology and the WMP20G grade provide a coated carbide substrate designed to resist abrasive and adhesive wear typical of stainless steel applications. The MM4 chipbreaker promotes controlled chip segmentation even when machining materials prone to built-up edge, which reduces interruptions and rework. The combination of coating and chip control translates into a more consistent surface finish and less lateral tool deflection, allowing stable production runs and fewer insert changes per batch. This makes the insert particularly suitable where reproducible parts quality and predictable tool life are required. Geometry that supports productivity and process security The square 90° plate form with a 0.8 mm corner radius and 7° relief provides a balance between edge strength and cutting aggressiveness. The T3 thickness and size designation 09 ensure compatibility with standard turning and boring toolholders and permit multiple indexings before replacement. The geometry reduces edge chipping under interrupted cuts and supports safe engagement depths in common turning sequences. For workshops seeking to improve uptime, the insert’s design helps maintain cutting parameters longer, thereby reducing non-productive time for tool changes. Application notes and setup recommendations for dependable results Designed primarily for stainless steel (ISO group M), the insert excels in medium to robust cutting conditions and where secure chip evacuation is essential. The coated grade supports higher thermal and adhesive resistance, but stable fixturing and appropriate coolant/lubrication remain important to prevent workhardening and to control temperatures. For best outcomes, match the insert to a suitable toolholder rated for square 90° inserts and ensure a rigid machine setup. For process-specific cutting data or to confirm compatibility with a given holder system, Metav Werkzeuge offers technical guidance and can assist with optimisation. For tailored advice on Walter Tools Tiger·tec Gold inserts such as the SCMT09T308-MM4 WMP20G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt application support and recommendations. Technical data Article number: SCMT09T308-MM4-WMP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT09T308-MM4 WMP20G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Size: 09 Thickness: T3 Tolerance class: M Special features Coating/technology: Tiger·tec Gold Chipbreaker: MM4 Material: coated carbide Suitable for: stainless steel Application: turning and drilling/boring indexable insert FAQ Which materials are suitable for this insert? The SCMT09T308-MM4 WMP20G is optimised for stainless steel (ISO group M) and is designed to manage the adhesion and heat-related challenges these materials present while maintaining stable chip formation. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on the SCMT09T308-MM4 WMP20G promotes controlled chip segmentation, which reduces the risk of entangling chips and improves surface quality during continuous and interrupted cuts. What does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WMP20G grade enhances wear resistance and thermal stability, supporting longer tool life and more consistent cutting-edge performance when machining stainless steel. Is this insert compatible with common square insert holders? Yes, the square 90° form and T3 thickness of the SCMT09T308-MM4 WMP20G are compatible with standard holders for 09-size square turning and boring inserts; verify holder clamping dimensions before mounting. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and cutting forces: it provides robustness against chipping while still allowing acceptable surface finish and manageable cutting loads in stainless steel applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T308-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, consistent edge life and the productivity of the Tiger·tec Silver grade for efficient rostfreier Stahl machining; order directly via Metav Werkzeuge or ask the consultants for tailored recommendations. SCMT09T308-MM4 WMP20S — Walter Tools square indexable turning/boring insert, Tiger·tec Silver, for rostfreier Stahl SCMT09T308-MM4 WMP20S is a square 90° indexable insert designed for robust rostfreier Stahl turning and boring applications, offering stable chip formation and durable performance under medium to heavy cutting conditions. Tiger·tec Silver coating Optimised for rostfreier Stahl (ISO group M) Stable chip formation and edge life Square 90° insert, 0.8 mm corner radius Stable chip control that reduces downtime The insert features the MM4 chipbreaker, which promotes predictable chip formation when machining rostfreier Stahl — a material class prone to long, stringy chips and high heat. The controlled chips reduce the risk of tool interference and workpiece damage, leading to fewer interruptions on the production floor. For operators unfamiliar with chipbreaker terminology: this is a dedicated surface geometry that shapes the chip as it forms, directing it away from the cutting zone and improving process reliability. The result is measurable process stability and reduced tool-change frequency. Coating and grade for longer tool life in demanding conditions The Tiger·tec Silver technology combined with the WMP20S grade provides a coated cemented-carbide composition tailored for rostfreier Stahl. This combination improves wear resistance and supports a stable cutting edge under elevated temperatures typical of that material group. In practice, this means extended tool life and more consistent part quality over longer production runs. The coated substrate helps to limit built-up edge formation, which is a common cause of premature wear when machining tough, heat-generating alloys. Geometry designed for accuracy and flexibility With a square 90° form, 0.8 mm corner radius and a 7° clearance, the insert allows secure positioning in standard toolholders while offering the versatility to perform both finishing and light roughing tasks. The 0.8 mm radius balances edge strength and the ability to achieve acceptable surface finish; larger radii improve durability, smaller radii enhance finish. The T3 thickness specification ensures sufficient support for axial and radial cutting forces typical in boring and turning, helping to maintain dimensional accuracy across batch production. Practical benefits and recommended use cases This indexable insert is intended for shops focusing on rostfreier Stahl components where repeatability and process security are priorities. Typical applications include shaft and sleeve turning, interrupted cuts in repair work and batch production where tool-change intervals and consistent surface quality influence throughput. The insert’s combination of chip control, coated grade and robust geometry translates into lower overall machining costs by reducing scrap, stabilising cycle times and simplifying tool inventory management. For reliable rostfreier Stahl machining with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge to discuss application-matched tool selection and ensure optimal process performance; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SCMT09T308-MM4-WMP20S-WALTER SKU: SCMT09T308-MM4-WMP20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Silver Facts Free angle: 7° Corner radius: 0.8 mm Insert size designation: 09 Thickness: T3 Special features Chipbreaker: MM4 Grade: WMP20S Geometry: Square 90° Coating technology: Tiger·tec Silver Tolerance class: M Suitable for: rostfreier Stahl (ISO group M) FAQ What materials is this insert suitable for? The SCMT09T308-MM4 WMP20S insert is specified for rostfreier Stahl (ISO group M) and is optimised to handle the toughness and heat generation typical of these alloys. How does the MM4 chipbreaker help in practice? The MM4 chipbreaker on this Walter Tools insert shapes and controls chips during cutting, reducing chip entanglement and contributing to steadier machining cycles and fewer stoppages. Can this insert be used for both finishing and roughing? Yes, the square 90° geometry with a 0.8 mm corner radius allows flexibility for light roughing and finishing operations while maintaining edge strength. What is the advantage of the Tiger·tec Silver coating on this grade? Tiger·tec Silver enhances wear resistance and thermal stability, meaning the WMP20S grade maintains a stable cutting edge longer during continuous rostfreier Stahl machining. Which toolholders are compatible with this insert form? Standard holders designed for SCMT-style square 90° inserts are compatible; correct clamping and seat condition are essential to achieve the stated performance of the SCMT09T308-MM4 WMP20S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SCMT09T308-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high cutting-edge stability, targeted chip control and the Tiger·tec Silver grade for reliable machining of difficult materials; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SCMT09T308-MM4 WSM10S turning insert — Walter Tools, Tiger·tec Silver, MM4 chipbreaker SCMT09T308-MM4 WSM10S is a coated carbide turning insert designed for heavy-duty and heat-prone materials, offering stable cutting performance in demanding turning applications Walter Tools Tiger·tec Silver grade WSM10S Suitable for rostfreier Stahl and superalloys MM4 chipbreaker for reliable chip control Square 90° form with 0.8 mm corner radius Built for machining rostfreier Stahl and superalloys with confidence The insert is based on the Tiger·tec Silver coating technology and the WSM10S grade, which together deliver enhanced wear resistance and thermal stability. This combination is particularly effective when machining rostfreier Stahl and materials from the S group (heat‑resistant superalloys and titanium), where heat accumulation and edge wear are the main challenges. The coated carbide substrate supports secure chip formation and reduces the risk of built‑up edge, which improves component surface quality and extends tool life. Consistent chip control for uninterrupted production The MM4 chipbreaker geometry provides predictable chip flow and efficient evacuation during turning operations. Stable chip control reduces interruptions caused by clogging or awkward chip shapes, which in turn lowers rework rates and increases uptime on the machine. Because chip behaviour is made more consistent, coolant strategies and cutting parameters can be optimised with confidence, resulting in a measurable improvement in process efficiency. Geometry that secures precision and repeatability A square 90° format combined with 0.8 mm corner radius and 7° clearance angle gives a reliable seating and a well‑defined cutting edge for repeatable part finishing. The T3 plate thickness and SCMT format ensure robust clamping and reduced vibration at the cutting zone, which benefits dimensional accuracy and surface finish. These geometric details translate into fewer rejects and more predictable tool cycles for serial production. Practical benefits for workshop productivity and cost control By choosing an insert from the Tiger·tec Silver range, users benefit from longer intervals between tool changes and fewer process adjustments. The grade’s resistance to thermal and mechanical loads helps preserve the cutting edge, decreasing overall tooling consumption. In practice this means higher first‑pass yields and lower per‑part tooling costs, especially on components made from rostfreier Stahl or other difficult alloys where conventional grades would wear quickly. Contact Metav Werkzeuge for tailored cutting data and fast supply of Walter Tools Tiger·tec Silver inserts; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: SCMT09T308-MM4-WSM10S-WALTER Product name: SCMT09T308-MM4 WSM10S Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coated carbide grade Tiger·tec Silver Chipbreaker: MM4 Suitable for rostfreier Stahl (M) Suitable for heat‑resistant superalloys and titanium (S) Designed for stable chip formation and long edge life FAQ What materials is this insert suitable for? The SCMT09T308-MM4 WSM10S insert from Walter Tools is designed for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and secure chip formation. Which chipbreaker does the insert use and what is the benefit? The insert features the MM4 chipbreaker, which ensures predictable chip shapes and improved evacuation, reducing machine stoppages and improving process reliability. How does the Tiger·tec Silver grade affect tool life? The Tiger·tec Silver coating and the WSM10S grade enhance wear resistance and heat tolerance, which typically translates into longer tool life and fewer insert changes when machining demanding materials. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SCMT09T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a precise MM4 chipbreaker for reliable performance in demanding materials; the insert’s square 90° form with a 0.8 mm corner radius ensures long tool life and consistent surface finish. Order the product directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T308-MM4 WSM20S indexable insert by Walter Tools — Tiger·tec Silver coating, for rostfreier Stahl and superalloys The SCMT09T308-MM4 WSM20S is a square 90° indexable insert designed for drilling, boring and turning applications in rostfreier Stahl and heat-resistant superalloys and titanium. Tiger·tec Silver coated carbide grade WSM20S Optimised MM4 chipbreaker for stable chips Square 90° form with 0.8 mm corner radius 7° clearance angle for secure cutting performance Increase throughput with stable chip control and higher productivity The combination of the WSM20S grade and the Tiger·tec Silver coating is engineered to provide consistent process security when machining demanding materials. The MM4 chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and interruptions during operation. For rostfreier Stahl and nickel-based alloys, where chips can weld and cooling is challenging, this insert helps maintain stable cutting forces and longer tool cycles, contributing to a measurable increase in machining efficiency and reduced downtime. Achieve reliable surface quality and extended tool life The insert’s square 90° geometry together with a 0.8 mm corner radius balances cutting-edge strength and surface finish. The 7° clearance angle prevents rubbing while ensuring a stable engagement with the workpiece, which supports repeatable dimensional accuracy. Coated carbide with the Tiger·tec Silver system improves heat resistance and wear performance, so fewer index changes are required and consistent component quality can be maintained over longer series runs. Clear selection and straightforward application across materials With a plate size of 09 and thickness T3, this insert suits compact toolholders and operations that demand rigidity. The designation and geometry make it suitable for a range of machining tasks, from light finishing to heavier interrupted cuts in superalloys. Technical terms clarified: a chipbreaker shapes chips to avoid entanglement; clearance angle is the relief behind the cutting edge that prevents rubbing; corner radius affects strength and surface finish. These features together make the insert a pragmatic choice for workshops requiring dependable performance in rostfreier Stahl and high-temperature alloys. Contact Metav Werkzeuge for tailored application advice and secure supply of Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT09T308-MM4-WSM20S-WALTER Designation: SCMT09T308-MM4 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Core specifications Clearance angle: 7° Corner radius: 0.8 mm Shape: Square 90° Plate size: 09 Thickness: T3 Tolerance class: M Materials & features Suitable for: rostfreier Stahl (M) Suitable for: Superalloys and titanium (S) Coating: Tiger·tec Silver Material type: Coated carbide Application: Drilling, boring and turning FAQ Which materials is this insert suitable for? The SCMT09T308-MM4 WSM20S insert is specified for rostfreier Stahl and for heat-resistant superalloys and titanium, corresponding to ISO groups M and S. What advantage does the MM4 chipbreaker provide? The MM4 chipbreaker on this Walter Tools insert promotes stable chip formation and easier evacuation, which reduces the risk of built-up edge and improves process consistency when machining sticky materials. How does the corner radius affect performance? A corner radius of 0.8 mm increases edge strength compared with sharper radii, improving resistance to edge chipping and helping to achieve a consistent surface finish under varying cutting conditions. For which operations is the insert intended? The geometry and designation make it suitable for drilling, boring and turning tasks; the square 90° form allows robust positioning for a range of cutting strategies. What benefits does the Tiger·tec Silver coating deliver? Tiger·tec Silver coating enhances thermal resistance and wear behaviour of the coated carbide grade WSM20S, resulting in improved tool life and steady cutting performance in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation or partnership. The offered item is original and brand-new from the manufacturer.
SCMT09T308-MM4 WSM30S MM4 Wendeplatten - Walter Tools
A reliable choice for heavy-duty turning tasks, combining the WSM30S Tiger·tec Silver grade with an MM4 chipbreaker and a robust 0.8 mm corner radius for secure edge life; ideal where stable chip formation and high process security are required. Order or request technical advice via Metav Werkzeuge for straightforward integration into production. SCMT09T308-MM4 WSM30S turning and boring indexable insert — Tiger·tec Silver for rostfreier Stahl and superalloys | Walter Tools A versatile turning and boring insert, the SCMT09T308-MM4 WSM30S is designed for demanding machining of rostfreier Stahl and heat‑resistant alloys, offering controlled chip formation and long tool life. Tiger·tec Silver coating, WSM30S grade Optimised MM4 chipbreaker for stable chips 0.8 mm corner radius, 7° relief angle Square 90° insert, T3 thickness Consistent performance on rostfreier Stahl and high‑temperature alloys The Tiger·tec Silver WSM30S grade is a coated carbide developed for materials that are difficult to machine. In applications involving rostfreier Stahl and superalloys, the combination of the coating technology and the substrate ensures secure chip formation and protects the cutting edge against thermal and mechanical stress. This results in fewer interruptions, more predictable tool life and improved process stability, particularly in serial production where repeatability matters. Geometry and chip control that protect the edge and surface finish The insert’s MM4 chipbreaker is engineered to produce short, controllable chips under typical turning and boring conditions, reducing the risk of entanglement and machine downtime. The 0.8 mm corner radius and 7° relief angle increase edge strength while supporting an acceptable surface finish on shoulders and external profiles. The square 90° form offers multiple effective cutting corners, making the component suitable for robust shoulder cuts and heavy interruptions with reliable support at the cutting zone. Practical advantages for workshop productivity and process security With tolerance class M and a compact T3 thickness, the insert balances rigidity and adaptability for a range of toolholders and setups. The grade’s emphasis on stable cutting edges minimises flank wear and contributes to longer intervals between indexings. In practice, the result is higher uptime and lower scrap rates when machining demanding alloys, which supports a measurable improvement in machining efficiency and cost control for production environments. Ask Metav Werkzeuge about Walter Tools Tiger·tec Silver inserts for reliable machining of rostfreier Stahl and superalloys — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order support Technical Data Article number: SCMT09T308-MM4-WSM30S-WALTER Designation: SCMT09T308-MM4 WSM30S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Shape: Square 90° Tolerance class: M Special features Grade: WSM30S (Tiger·tec Silver) Chipbreaker: MM4 Substrate: coated carbide Material groups: ISO M (rostfreier Stahl), ISO S (superalloys/titanium) Application: turning and boring indexable insert FAQ Is this insert suitable for rostfreier Stahl? Yes. The SCMT09T308-MM4 WSM30S by Walter Tools is specified for ISO group M, which includes rostfreier Stahl, and its Tiger·tec Silver grade supports secure chip formation when machining these alloys. What advantages does the MM4 chipbreaker provide? The MM4 chipbreaker on the SCMT09T308-MM4 WSM30S promotes short, controlled chips, reducing chip entanglement and improving process safety during turning and boring operations. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases the edge strength of the insert, allowing more robust engagement and improved resistance to wear while maintaining acceptable surface quality on shoulder and profile cuts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T308-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, reliable MP4 chip control and precise 0.8 mm corner radius for consistent steel turning results; order the SCMT09T308-MP4 WPP10G inserts directly via Metav Werkzeuge or consult the team for application support. SCMT09T308-MP4 WPP10G — indexable insert for steel turning with Tiger·tec Gold coating SCMT09T308-MP4 WPP10G is a square 90° indexable insert designed for productive turning and drilling applications in steel, combining a Tiger·tec Gold coated grade with an MP4 chipbreaker for stable machining. Tiger·tec Gold coating for high wear resistance Square 90° form with 0.8 mm corner radius MP4 chipbreaker for stable chip control Optimised for steel machining (ISO group P) Consistent tool life thanks to Tiger·tec Gold and WPP10G The combination of the Tiger·tec Gold technology and the WPP10G grade provides a balance between wear resistance and toughness. This coating system reduces flank and crater wear under typical steel turning temperatures, which leads to longer insert life and fewer index changes. For production environments, the result is more predictable tool life and reduced downtime, as the coated cemented carbide substrate resists thermal degradation while maintaining edge stability. Predictable cutting behaviour with MP4 chip control The MP4 chipbreaker geometry is engineered to channel chips reliably during both turning and drilling operations. By promoting short, controllable chips the insert lowers the risk of entanglement, improves evacuation in through-hole and face operations, and contributes to consistent surface finishes. The 7° free cutting angle supports smooth shear formation, while the square 90° shape offers robust edge support for interrupted cuts or shoulder turning. Application focus: optimised for steels (ISO group P) This insert is specifically formulated for machining steel, including unalloyed and alloyed grades as indicated by the ISO group P. The carbide grade selection within the WPP10G family accommodates the typical heat generation and chip form found in steel turning, offering a compromise between abrasive wear resistance and fracture toughness. For shops processing mixed steel batches, this insert performs well in general-purpose turning tasks where repeatability and process stability are priorities. Geometry and handling benefits that aid process control With a 0.8 mm corner radius and a thickness marked as T3, the insert offers a robust cutting edge for durability and strength in shoulder and facing operations. The square 90° geometry creates stable clamping in compatible toolholders and supports higher radial engagement when required. These geometric features, combined with the MP4 chipbreaker, translate into fewer edge failures and improved machining reliability across batch and single-piece production. For reliable steel turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and application advice — Metav Werkzeuge can advise on grade selection and compatible toolholders to maximise process efficiency Technical data Article number: SCMT09T308-MP4-WPP10G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT09T308-MP4 WPP10G Walter Tools Brand: Walter Tools Type: Indexable insert for turning and drilling Grade: WPP10G Series: Tiger·tec Gold Facts Corner radius: 0.8 mm Relief angle: 7° Insert form: Square 90° Size code: 09 Thickness code: T3 Tolerance class: M Special features Chipbreaker: MP4 Coating technology: Tiger·tec Gold Material application: Steel (ISO group P) Intended use: Turning and drilling/boring indexable insert FAQ What materials is this insert suited for? The SCMT09T308-MP4 WPP10G insert is optimised for steel machining in accordance with ISO group P and performs well on both unalloyed and alloyed steels. How does the MP4 chipbreaker improve machining? The MP4 chipbreaker on the WPP10G grade promotes short, controllable chips, improving evacuation and surface finish while reducing the risk of chip entanglement during turning and drilling. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and thermal stability, extending insert life and maintaining cutting-edge integrity under the heat and stresses typical of steel turning. Is the SCMT09T308-MP4 suitable for shoulder cuts and intermittent machining? Yes, the square 90° form and 0.8 mm corner radius provide strong edge support, making the insert well suited to shoulder turning and interrupted cuts where edge robustness is important. Can the insert be used in drilling operations as well as turning? The product designation indicates suitability for both drilling/boring and turning applications; the MP4 chip control and robust geometry help bridge these uses where toolholder compatibility allows. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names remain the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the named manufacturers. The item offered is an original, factory-new product of the manufacturer.
SCMT09T308-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, reliable MP4 chipforming, and a 0.8 mm nose radius for a stable production process and consistent surface quality; order the SCMT09T308-MP4 WPP20G directly via Metav Werkzeuge or ask our consultants for tailored recommendations. SCMT09T308-MP4 WPP20G indexable insert — Tiger·tec Gold coating, MP4 chipformer, for steel — Walter Tools The SCMT09T308-MP4 WPP20G is an indexable insert designed for drilling/boring and turning operations, optimised for ISO P (steel) machining where controlled chip formation and long tool life are essential. Tiger·tec Gold coating for coated carbide MP4 chipformer for stable chip control 0.8 mm nose radius for reliable surface finish Optimised for ISO P (steel) applications Greater productivity through optimised coating and geometry Thanks to the Tiger·tec Gold coating and the WPP20G grade, this insert delivers improved wear resistance and consistent cutting performance when machining steel. The combination of a coated carbide substrate and a modern coating system reduces flank wear and supports higher cutting parameters, which in turn raises throughput. The MP4 chipformer is engineered to break and evacuate chips predictably, reducing interruptions and machine idle time. These technical choices translate into measurable gains in cycle time and process stability for production-focused workshops. Predictable surface quality and dimensional control A 0.8 mm nose radius and a square 90° insert form ensure a stable cutting edge geometry that helps achieve consistent surface finish and dimensional repeatability. The 7° relief angle contributes to a predictable cutting force and favourable engagement with the workpiece, especially in interrupted cuts or when plunge-turning. Such geometric parameters mean fewer rework cycles and less reliance on manual correction, supporting both quality targets and shop-floor efficiency. Application focus: steel machining with ISO P compatibility The grade is specified for steel under ISO P; the insert is therefore suited to a wide range of unalloyed and alloyed steels commonly encountered in industrial parts production. Coated carbide combined with the specified chipbreaker provides good thermal stability and controlled chip flow during medium to high cutting speeds. For operations prioritising repeatable results in steel, the insert offers a robust balance between wear resistance and toughness, helping to avoid premature edge chipping while maintaining productivity. Handling, tool life and integration into existing toolchains The insert is available in size 09 with a T3 thickness and mounting execution T, enabling straightforward integration into standard toolholders that accept the SCMT09T308-MP4 form factor. Its tolerance class M reflects machining-grade accuracy suitable for general turning and boring tasks. Selection of this insert supports longer tool life and fewer index changes, reducing downtime and simplifying inventory management for workshops that process steel components regularly. For high-productivity steel turning and boring, request the Walter Tools SCMT09T308-MP4 WPP20G from Metav Werkzeuge or contact our technical consultants at Metav Werkzeuge for specific cutting data and holder recommendations. Technical data Article number / SKU: SCMT09T308-MP4-WPP20G-WALTER Designation: SCMT09T308-MP4 WPP20G Product type: Indexable insert for drilling/boring and turning Brand: Walter Tools Grade / Coating: WPP20G / Tiger·tec Gold Core specifications Insert shape: Square 90° Size: 09 Corner radius: 0.8 mm Relief angle: 7° Chipformer: MP4 Thickness: T3 Tolerance class: M Substrate: Coated carbide Applications & features Material application: Steel (ISO P) Suitable for: unalloyed and alloyed steels Benefits: stable chip control, wear resistance, productivity focus Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suited for? The SCMT09T308-MP4 WPP20G is specified for steel machining (ISO P), covering unalloyed and alloyed steels typical in industrial production. Which chipformer is used and why does it matter? This insert features the MP4 chipformer, which provides controlled chip breakage and evacuation, improving process stability and reducing the risk of chip-related interruptions. What are the key geometry values relevant for setup? Important geometry values are a 0.8 mm corner radius, 7° relief angle and square 90° shape; these influence surface finish, cutting forces and suitability for plunge or interrupted cuts. How does the Tiger·tec Gold coating benefit the operation? The Tiger·tec Gold coating increases wear resistance and thermal stability on the coated carbide substrate, enabling higher cutting speeds and extended tool life in steel applications. Can this insert be used in existing toolholders for SCMT form inserts? Yes, the SCMT09T308-MP4 WPP20G matches the SCMT09 form factor and a T3 thickness, allowing integration into standard holders designed for this insert type. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T308-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, a dedicated RK4 chipbreaker and the square 90° geometry for consistent cast‑iron machining; this insert delivers economical running and predictable tool life for serial production. Order the SCMT09T308-RK4 WKK10S directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T308-RK4 WKK10S square 90° turning insert for cast iron – Walter Tools The SCMT09T308 WKK10S is a square 90° indexable insert designed for efficient turning and boring operations in cast iron, combining a Tiger‑tec Silver coated carbide grade with an RK4 chipbreaker for robust chip control. Tiger‑tec Silver coating for abrasive wear Optimised for machining cast iron RK4 chipbreaker for reliable chip control Square 90° form, 0.8 mm corner radius Higher productivity for abrasive cast‑iron work The combination of the Tiger‑tec Silver coating and the WKK10S carbide grade makes this insert particularly suited to abrasive cast‑iron applications. The coating reduces flank and crater wear under typical cast‑iron cutting conditions, which leads to longer tool life and fewer indexings. The RK4 chipbreaker is engineered to manage the short, brittle chips typical of cast iron, reducing the risk of built‑up edge and improving surface consistency; this translates directly into more stable cycle times on production parts. Geometry that supports consistent part quality A square 90° plate form paired with 7° clearance and a 0.8 mm corner radius gives a balance between strength and edge sharpness. The sturdy corner supports heavier cuts while the modest radius helps maintain acceptable surface finish without compromising edge life. The T3 plate thickness and tolerance class M contribute to repeatable clamping and indexing, so process engineers can rely on predictable tool offsets and maintain tight machining tolerances in series production. Application guidance and process benefits The insert is purpose‑built for cast‑iron turning and is a practical choice for both roughing cycles and general‑purpose finishing where abrasive wear is the dominant concern. With the specification optimised for G‑group materials, the design reduces downtime related to frequent insert changes. As an indexable insert from Walter Tools, it supports fast changeover and straightforward inventory management, helping shops to improve throughput and cost per part while maintaining surface quality and dimensional stability. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Silver inserts and arrange availability or machining recommendations for the SCMT09T308-RK4 WKK10S via Metav Werkzeuge. Technical data Article number: SCMT09T308-RK4-WKK10S-WALTER Designation: SCMT09T308-RK4 WKK10S Brand: Walter Tools Facts Plate form: Square 90° Clearance angle: 7° Corner radius: 0.8 mm Thickness: T3 Plate size: 09 Special features Series: Tiger‑tec Silver Grade: WKK10S (coated carbide) Chipbreaker: RK4 Material application: Cast iron (K) Tolerance class: M FAQ What materials is this insert intended for? The SCMT09T308-RK4 WKK10S is formulated for cast iron machining, with the Tiger‑tec Silver grade adapted to abrasive wear conditions typical of G‑group materials. Which chipbreaker is fitted and what is its benefit? The insert features an RK4 chipbreaker, designed to produce controlled, short chips in cast‑iron turning and to reduce the likelihood of edge build‑up. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, allowing moderate depths of cut while maintaining acceptable part quality. Is the insert suitable for finishing as well as roughing? Yes, the geometry and coated grade are suitable for general‑purpose use, offering productive roughing and stable finishing where abrasive wear is prevalent. What series and coating technology does the insert use? This product belongs to the Tiger‑tec Silver series and employs a coated carbide grade designated WKK10S for enhanced wear resistance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for clarification only. There is no affiliation between our company and the mentioned brands. The offered article is an original factory‑new product of the manufacturer.
SCMT09T308-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a tailored WKK20S grade and the RK4 chipbreaker for consistent chip control and economical machining of cast iron; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SCMT09T308-RK4 WKK20S indexable insert for boring and turning – Walter Tools, Tiger·tec Silver, optimised for cast iron A SCMT09T308-RK4 WKK20S indexable turning and boring insert designed for reliable machining of cast iron components in industrial production environments Tiger·tec Silver coated carbide Optimised for cast iron machining RK4 chipbreaker for controlled chips Square 90° geometry with 0.8 mm radius High-performance cutting for abrasive cast iron work The combination of the Tiger·tec Silver coating and the WKK20S grade delivers a balance between wear resistance and toughness specifically for cast iron. The coated carbide construction reduces abrasive wear from graphite and hard inclusions, while the grade’s design copes with the typically short, breaking chips of many cast irons. The RK4 chipbreaker ensures predictable chip formation and evacuation during both boring and turning operations, reducing the risk of built-up edge and interrupted cutting. This results in more stable machining cycles and fewer unplanned interruptions. Consistent productivity and predictable tool life A moderate clearance angle (7°) and the 0.8 mm corner radius provide a robust cutting edge that tolerates machining variations without sacrificing surface quality. The square 90° geometry offers versatility for shoulder cuts and general turning tasks, while the plate size 09 and thickness T3 suit common toolholder systems. These technical choices emphasise process reliability and repeatability: reduced downtime, stable cutting forces and easier planning of tool-change intervals contribute directly to improved output per shift. Practical integration and application guidance for workshop use For practical setup, select a compatible indexable toolholder rated for square inserts and confirm insert clamping torque per holder manufacturer guidelines. The insert is primarily intended for cast iron (material group K) and performs well on abrasive and brittle grey and nodular irons. The RK4 chipbreaker simplifies chip control at typical cutting parameters for roughing and finishing passes; for users less familiar with chipbreaker function, it channels and breaks chips to prevent entanglement and permit higher feed rates while maintaining surface integrity. For adaptations to specific workpieces, consult the technical data sheet or our application engineers. Contact Metav Werkzeuge today for tailored advice on integrating Walter Tools Tiger·tec Silver WKK20S inserts into production — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder compatibility and order options Technical Data Article number: SCMT09T308-RK4-WKK20S-WALTER Designation: SCMT09T308-RK4 WKK20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Plate form: Square 90° Chipbreaker: RK4 Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Tolerance class: M Special features Coated carbide grade for abrasive wear resistance Optimised for cast iron (material group K) Reliable chip control with RK4 chipbreaker Suitable for boring and turning applications Square geometry for shoulder and general turning FAQ What materials is this insert suitable for? The SCMT09T308-RK4 WKK20S insert by Walter Tools is optimised for cast iron (material group K) and designed to resist abrasive wear typical of many cast-iron grades. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker on the SCMT09T308-RK4 WKK20S shapes and breaks chips to improve evacuation and reduce the risk of chip-related interruptions during boring and turning. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius provides a compromise between edge strength and surface quality: it improves edge robustness for interrupted cuts while still achieving good surface integrity on cast-iron components. Which series and coating technology does the insert use? This insert belongs to the Tiger·tec Silver series and uses the WKK20S coated carbide grade developed for process-stable machining of cast iron. Is this insert compatible with standard square insert toolholders? Yes, the square 90° geometry and size 09 make the insert compatible with common toolholders designed for square turning and boring inserts; verify clamping and seating dimensions against the holder specification. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T308-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger‑tec Gold grade, precise RM4 chip control and a compact square form for reliable rostfreier Stahl turning — order directly via Metav Werkzeuge or consult our technical team for process recommendations. SCMT09T308‑RM4 WMP20G square 90° turning insert — 0.8 mm nose radius, Tiger‑tec Gold, Walter Tools A SCMT09T308‑RM4 WMP20G turning insert engineered for medium to robust machining of rostfreier Stahl in demanding production environments Tiger‑tec Gold coating for stable edge life Optimised RM4 chipbreaker for consistent chips Square 90° form with 0.8 mm nose radius Consistent edge performance for demanding rostfreier Stahl machining The coated carbide grade WMP20G, part of the Tiger‑tec Gold series, offers a balance of wear resistance and toughness that supports reliable machining of rostfreier Stahl. The insert’s design reduces build‑up of material on the cutting edge, so component tolerances remain stable across longer tool cycles. With a clearance angle of 7° and a precisely formed cutting geometry, the insert delivers repeatable cutting conditions, translating to fewer tool changes and improved uptime. This section focuses on measurable production benefits rather than abstract claims, emphasising process stability and reduced scrap rates. Better chip control and surface quality through optimised geometry Equipped with the RM4 chipbreaker and a 0.8 mm nose radius, the insert promotes controlled chip formation under variable cutting conditions. Controlled chips reduce the risk of rework and machine downtime, particularly when dealing with the sticky, heat‑sensitive behaviour of rostfreier Stahl. The square 90° form provides robust corner strength for shoulder cuts and interrupted cuts, offering a reliable balance between strength and finish. Clear technical attributes lead to practical advantages: fewer interruptions, consistent surface quality and predictable tool life. Robust construction and straightforward integration into workflows The insert’s coated carbide substrate and the Tiger‑tec Gold coating technology combine to offer good resistance to abrasive and adhesive wear while maintaining a stable cutting edge. The format SCMT09T308‑RM4 is compatible with common clamping systems for indexable turning, enabling quick insert changes and straightforward inventory management. Designed for industrial production, the insert supports optimisation of cycle times and tool utilisation rates. Where process reliability matters, this solution integrates into existing toolholders with minimal adaptation. Process support and selection guidance for secure implementation For workshops upgrading tooling for rostfreier Stahl, selecting the right grade and chipformer is crucial. The WMP20G grade is specified for medium to robust conditions and is particularly suited where sticky chip formation and thermal load demand a balanced coating and substrate. When combining this insert with appropriate feeds and speeds adapted to the component geometry, operators can expect improved edge stability and predictable wear patterns. If further machining data or comparators are required, technical advisors can supply cutting parameters aligned to the specific machine and workpiece setup. Contact Metav Werkzeuge for tailored cutting data, sample availability and process advice on Walter Tools Tiger‑tec Gold inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SCMT09T308‑RM4‑WMP20G‑WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT09T308‑RM4 WMP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Clearance angle: 7° Nose radius: 0.8 mm Thickness: T3 Size: 09 Tolerance class: M Special features Grade: WMP20G Coating technology: Tiger‑tec Gold Chipbreaker type: RM4 Form: Square 90° Base material: coated carbide Suitable for: rostfreier Stahl FAQ What materials is this insert intended for? The SCMT09T308‑RM4 WMP20G insert is specified for rostfreier Stahl and designed to handle the toughness and thermal behaviour typical of these alloys. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker provides consistent chip segmentation and evacuation, reducing the likelihood of entanglement and improving process stability when turning rostfreier Stahl. Is the insert compatible with standard turning toolholders? Yes, the SCMT09T308‑RM4 format conforms to common indexable insert geometries and can be used with suitable square insert toolholders for secure clamping and easy indexation. What advantage does the Tiger‑tec Gold coating offer? Tiger‑tec Gold on the WMP20G grade enhances wear resistance while maintaining edge toughness, which supports longer tool life under medium to robust cutting conditions on rostfreier Stahl. Can this insert be used for interrupted cuts? The square 90° form and robust corner geometry make the insert appropriate for interrupted cuts and shoulder machining, offering good resistance to mechanical shock. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SCMT09T308-RM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the RM4 chipbreaker for reliable machining of stainless steel; the square geometry with a 0.8 mm corner radius ensures stable clamping and consistent edge life. Order directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. SCMT09T308-RM4 WMP20S — Square turning indexable insert, Tiger·tec Silver, Walter Tools The SCMT09T308-RM4 WMP20S is a square 90° indexable insert engineered for drilling, boring and turning applications, optimised for medium to robust machining of stainless steel under demanding conditions. Tiger·tec Silver coated carbide RM4 chipbreaker for stable chips 7° clearance to reduce rubbing 0.8 mm corner radius for edge strength High-performance coating for heat-prone materials The Tiger·tec Silver coating combined with coated carbide substrate is designed to improve wear resistance and maintain a stable cutting edge when processing stainless steel, which typically generates heat and tends to work-harden. This surface treatment reduces friction at the cutting zone and supports secure chip formation, so that machining cycles remain consistent and predictable. For production environments where repeatability and process security matter, the coating technology helps to extend effective tool life and reduces unscheduled tool changes, contributing to greater overall productivity. Geometry and chip control that protect the edge The insert’s square 90° geometry, paired with the RM4 chipbreaker and a 7° clearance, provides an effective balance between chip control and cutting stability. The 0.8 mm corner radius increases edge strength and resistance to chipping during interrupted cuts or heavier depths of cut. The T3 thickness contributes to rigidity in the clamping pocket, reducing vibration and improving surface finish. Together, these features enable a stable machining process with fewer edge failures and more consistent surface quality on challenging stainless applications. Productivity advantages and process reliability Using this grade and geometry supports a more economical machining strategy: predictable flank and crater wear, steady chip flow and a robust edge reduce downtime and rework. The combination of coating and chipbreaker design delivers a lower risk of built-up edge and improved dimensional stability across production batches. For operations aiming to increase throughput without compromising quality, these characteristics translate into fewer tool changes, more consistent part conformity and a tangible improvement in overall process efficiency. Practical guidance for integrating the insert The insert is identified as SCMT09T308-RM4 WMP20S and is best paired with toolholders designed for square 90° inserts and secure clamping to exploit its rigidity. The grade WMP20S is specified for stainless steel in accordance with ISO group M, so select cutting parameters that account for work-hardening and heat generation typical of these alloys. If cutting-data tuning is required for a particular alloy or machine setup, Metav Werkzeuge can supply tailored recommendations and practical tips to help adapt feed and speed to maximise tool life and part quality. For tailored advice on using Walter Tools Tiger·tec Silver inserts for stainless steel, contact Metav Werkzeuge for application-specific cutting data and recommendations on the SCMT09T308-RM4 WMP20S solution. Technical data Article number / SKU: SCMT09T308-RM4-WMP20S-WALTER Name / designation: SCMT09T308-RM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: RM4 Geometry: Square 90° Grade: WMP20S (coated carbide) Suitable for: stainless steel Application: Drilling/boring and turning indexable insert Execution: T FAQ What materials is this insert suited for? The SCMT09T308-RM4 WMP20S is specified for machining stainless steel (ISO group M) and is engineered to manage the heat and work-hardening tendencies of those alloys. How does the RM4 chipbreaker affect machining performance? The RM4 chipbreaker promotes consistent chip control and evacuation, reducing the risk of built-up edge and helping to maintain surface quality during medium to robust cutting. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances wear resistance and reduces friction at the cutting edge, improving edge life and process stability when machining heat-generating stainless materials. Why is the 0.8 mm corner radius important? A 0.8 mm corner radius increases edge strength and resistance to chipping, particularly beneficial during interrupted cuts or when higher depths of cut are required. How can the insert be identified on the tool list? Look for the ISO-style designation SCMT09T308-RM4 WMP20S; this includes geometry, chipbreaker and grade information to ensure correct selection. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods from the manufacturer.
SCMT09T308-RM4 WMP30G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the RM4 chipbreaker and a 0.8 mm corner radius for stable, efficient turning of stainless steel; order via Metav Werkzeuge or contact consultants for process support. SCMT09T308-RM4 WMP30G — Square indexable insert for turning, Tiger·tec Gold, Walter Tools SCMT09T308-RM4 WMP30G is a square 90° indexable insert designed for turning and boring applications in stainless steel, optimising both edge life and chip control Tiger·tec Gold coated carbide grade WMP30G RM4 chipbreaker for secure chip control Optimised for stainless steel (ISO group M) 0.8 mm corner radius for robust edge stability Secure chip control keeps production flowing The coated carbide WMP30G grade, part of the Tiger·tec Gold series, combines a wear-resistant coating with substrate properties tailored to the demands of machining stainless steel. The RM4 chipbreaker is engineered to produce consistent chip segmentation under the high-heat, adhesive conditions typical for this material group; this results in fewer interruptions for chip clearing and a more predictable cycle time. For production planning, that means improved process reliability and fewer unscheduled stops, improving overall equipment effectiveness. Stable edges and consistent surface quality A square 90° insert form with a 0.8 mm corner radius delivers strong edge support and resistance to thermal and mechanical shock, which is crucial when turning tough alloys. The 7° clearance angle reduces rubbing and helps maintain cutting geometry under load, while the insert thickness (T3) contributes to rigidity in the toolholder. Together these characteristics help to produce repeatable surface finishes and dimensional consistency, reducing downstream rework and inspection time. Easier tool management, longer intervals between changes The SCMT designation corresponds to common toolholder systems, simplifying inventory and replacement on the shop floor. The coated, grade-optimised insert promotes longer edge life in medium to robust cutting conditions, often translating into lower tooling costs per component and less frequent intervention by operators. If uncertainty remains about suitability for a specific job or cutting data, Metav Werkzeuge offers technical advice and can provide cutting parameter recommendations tailored to the component material and machine conditions — email info@metav-werkzeuge.com or call +49 2822 7131930 for guidance. For tailored recommendations and ordering of Walter Tools inserts such as the SCMT09T308-RM4 WMP30G, contact Metav Werkzeuge for expert support and availability: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: SCMT09T308-RM4-WMP30G-WALTER Designation: SCMT09T308-RM4 WMP30G Series: Tiger·tec Gold Grade: WMP30G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Square 90° Insert size: 09 Thickness: T3 Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RM4 Material group: stainless steel (ISO group M) Typical application: turning / boring indexable insert Sort class: coated cemented carbide FAQ What materials is this insert optimised for? The SCMT09T308-RM4 WMP30G is optimised for stainless steel (ISO group M), offering secure chip formation and stable cutting edges under the high heat and toughness typical of these alloys. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip fragmentation during turning operations, which reduces the risk of long, tangled chips and supports uninterrupted production when machining stainless steel. Can the insert be used in standard toolholders? Yes, the SCMT designation corresponds with common insert and toolholder systems for turning and boring, simplifying tool changes and stockkeeping. What performance advantage does Tiger·tec Gold provide? The Tiger·tec Gold coating increases wear resistance and thermal stability, extending edge life under medium to robust cutting conditions and improving process consistency for the WMP30G grade. What corner radius is recommended for roughing vs finishing? The 0.8 mm corner radius on this insert provides a balance between edge strength and surface finish; it is particularly suitable for stable roughing and semi-finishing when robustness is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanatory purposes only and do not imply any affiliation. The listed article is an original, brand-new product from Walter Tools.
SCMT09T308-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM10S grade for secure chip control and extended tool life when machining demanding alloys; order the insert via Metav Werkzeuge or consult the specialists for process-specific recommendations. SCMT09T308-RM4 WSM10S turning and drilling insert — Walter Tools, Tiger·tec Silver, RM4 chipbreaker SCMT09T308-RM4 WSM10S is a multi‑purpose indexable insert designed for demanding machining of heat‑resistant alloys and stainless steel in turning and drilling operations Tiger·tec Silver coated for high thermal resistance WSM10S grade for tough, heat‑resistant materials RM4 chipbreaker for controlled chip formation Square 90° form for stable seat and cutting edge Consistent performance on tough, heat‑resistant materials The combination of the WSM10S grade with the Tiger·tec Silver coating delivers a reliable balance between thermal resistance and wear protection. This insert is optimised for materials classified under ISO group M (stainless steel) and S (heat‑resistant superalloys and titanium), where workpiece toughness and poor thermal conductivity demand a coated, robust carbide. The result is stable chip formation and reduced edge breakdown, which translates into fewer tool changes and more predictable production cycles. Secure chip control and edge stability for safer machining With the engineered RM4 chipbreaker and a 0.8 mm corner radius, the insert supports predictable chip evacuation and a durable cutting edge under intermittent loads. The specified 7° clearance angle reduces rubbing on the flank, improving surface quality and lowering cutting temperatures. These geometry choices help maintain dimension and surface integrity during heavy engagement or when machining difficult batches, increasing overall process reliability. Versatile form factor for integrated tool systems The square 90° shape and size designation offer good indexing options and a stable seating in common holders. The T3 thickness and tolerance class M provide mechanical strength and consistent fit in pocketed tool bodies, making the insert suitable for both turning and approach‑boring operations where rigidity matters. Compatibility with common clamping systems allows straightforward integration into existing tooling setups, supporting efficient changeover and inventory management. Shop‑floor benefits: productivity, predictability, and lower total cost Using a coated, application‑focused grade minimises unexpected interruptions and supports higher cutting parameters where material and machine permit. The insert reduces scrap risk when machining stainless steel and superalloys by promoting stable cutting action and improved surface finish, which conserves operator time and downstream processing. For production environments aiming for repeatable cycles and traceable tool life, this insert offers a clear route to enhanced throughput and cost effectiveness. For tailored recommendations on applying Walter Tools' Tiger·tec Silver inserts in specific machining processes, contact Metav Werkzeuge — experts are available to advise on cutter selection, compatible holders and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SCMT09T308-RM4-WSM10S-WALTER Designation: SCMT09T308-RM4 WSM10S Manufacturer: Walter Tools Facts Grade: WSM10S Series: Tiger·tec Silver Free angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: RM4 Coating technology: Tiger·tec Silver (coated carbide) Suitable for: stainless steel (ISO M) Suitable for: heat‑resistant superalloys and titanium (ISO S) Application: turning and drilling indexable insert Manufacturer brand: Walter Tools FAQ What materials is this insert best suited to machine? This insert is designed primarily for stainless steel and heat‑resistant superalloys or titanium; the WSM10S grade and Tiger·tec Silver coating support stable cutting in these groups. Can the insert be used for both turning and boring operations? Yes, the SCMT09T308‑RM4 geometry and square 90° form permit use in turning and approach‑boring tool holders where the seat and clamping match the insert specification. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and supporting consistent surface finish during intermittent or continuous cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
SCMT09T308-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Silver coating, a secure RM4 chipbreaker and a stable 7° clearance for reliable machining of stainless steel and heat-resistant alloys; order or consult Metav Werkzeuge for tailored recommendations. SCMT09T308-RM4 WSM20S — Boring/turning indexable insert, RM4 chipbreaker, Tiger·tec Silver, Walter Tools The SCMT09T308-RM4 WSM20S is a square, 90° indexable insert engineered for heavy-duty turning and boring of stainless steel and heat-resistant superalloys in demanding production environments. Tiger·tec Silver coating for edge stability Optimised RM4 chipbreaker for secure chips 7° clearance angle for reliable cutting Square 90° form with 0.8 mm nose radius Consistent chip control for demanding materials The combination of the RM4 chipbreaker and the WSM20S grade (Tiger·tec Silver technology) promotes stable chip formation when machining tough alloys. As an indexable insert designed for heavy-duty use, the geometry supports uninterrupted chip flow and reduces the risk of built-up edge. This results in fewer interruptions on the shop floor and a steadier surface finish when working with stainless steel and heat-resistant superalloys. Stable cutting edges and extended tool life The coated carbide composition in WSM20S emphasises thermal resistance and edge stability under high cutting temperatures. The Tiger·tec Silver coating improves wear resistance and helps preserve the cutting edge over extended cycles, which contributes to process security and predictable tool-change intervals. The 7° clearance angle reduces flank rubbing and supports reliable contact conditions at the cutting zone. Versatile geometry for accurate turning and boring The square 90° form combined with a 0.8 mm nose radius and plate thickness T3 delivers a balance between strength and surface quality. This geometry allows secure axial engagement in boring bars or toolholders and provides a consistent contact profile for shoulder turning and external facing. The result is reproducible dimensional control and good edge robustness without sacrificing workpiece finish. Practical integration and selection guidance When integrating the insert into a tooling system, match the insert designation and holder geometry for correct seating and clamping. The SCMT09T308-RM4 WSM20S maintains compatibility with standard indexable turning and boring toolholders that accept square 90° inserts; selection should favour holders that ensure minimal overhang to exploit the grade’s thermal and mechanical advantages. For process optimisation, pair the insert with cutting parameters suited to stainless steel and high-temperature alloys to benefit from the stable chip control and enhanced edge life. For robust machining of stainless steel and heat-resistant superalloys, contact Metav Werkzeuge for expert selection of Walter Tools Tiger·tec Silver inserts—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: SCMT09T308-RM4-WSM20S-WALTER Designation: SCMT09T308-RM4 WSM20S Product type: Boring/turning indexable insert / turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Plate form: Square 90° Special features Grade: WSM20S (coated carbide) Chipbreaker: RM4 Coating: Tiger·tec Silver technology Applicable materials: stainless steel (M), heat-resistant superalloys / titanium (S) Application: Heavy-duty machining of stainless and superalloys FAQ What materials is this insert suitable for? The SCMT09T308-RM4 WSM20S is formulated for stainless steel and heat-resistant superalloys, reflecting the WSM20S grade’s thermal and edge-strength properties. Which operations are ideal for this insert? This Walter Tools turning insert is suitable for heavy-duty turning and boring operations where stable chip control and edge life are required. What does the WSM20S grade indicate? WSM20S denotes a coated carbide grade within the Tiger·tec Silver family, optimised for temperature resistance and reliable cutting-edge performance on tough alloys. How does the RM4 chipbreaker benefit production? The RM4 chipbreaker promotes safe chip formation and evacuation, which reduces interruptions and supports consistent surface quality during continuous turning and boring cycles. How should the geometry be matched to holders? Select toolholders compatible with square 90° inserts and ensure correct seating and minimal overhang to make full use of the insert’s 0.8 mm radius and 7° clearance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for clarification only and do not imply any affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
SCMT09T308-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Combining high thermal resistance, stable chip control and a robust corner radius, this insert supports secure machining of tough alloys and rostfreier Stahl while keeping tool life and process reliability high; order the insert via Metav Werkzeuge or contact our consultants for application advice. SCMT09T308-RM4 WSM30S indexable turning/boring insert – Tiger·tec Silver, RM4 chipbreaker (Walter Tools) The SCMT09T308-RM4 WSM30S is a coated carbide indexable insert designed for turning and boring applications in rostfreier Stahl and heat‑resistant superalloys, offering high cut‑edge stability and reliable chip control. Tiger·tec Silver coating for heat resistance Optimised RM4 chipbreaker for stable chips 90° square geometry with 0.8 mm corner radius Suited for rostfreier Stahl and superalloys Secure machining of rostfreier Stahl and superalloys The WSM30S grade, part of the Tiger·tec Silver family, is formulated for materials classified as M and S according to ISO 513. The chemical and physical behaviour of these materials leads to high cutting temperatures and a tendency to form built‑up edge; the coated hardmetal composition provides increased heat resistance and a durable cutting edge. This translates into fewer edge failures and a more consistent tool life in demanding production runs, reducing unexpected downtime and variances in part quality. Geometry engineered for consistent results A 90° square insert with a 0.8 mm corner radius and 7° relief offers a balanced compromise between edge strength and profile definition. The square form allows four cutting corners per indexable insert, supporting economical use, while the corner radius improves load distribution on the cutting edge for interrupted cuts or tougher feeds. With T3 plate thickness and tolerance class M, the insert provides the rigidity and dimensional reliability required for repeatable turning operations in a production environment. Optimised chip control for reliable production The RM4 chipbreaker is designed to control chip formation in sticky and cohesive material groups, aiding consistent chip evacuation and reduced recut. Controlled chip shaping helps to protect the insert’s edge and the machine tool, enabling stable machining parameters and predictable cycle times. For process planners, this means easier parameterisation and lower scrap rates when working with heat‑resistant alloys or rostfreier Stahl that typically present chip management challenges. Practical advantages on the shop floor Using a coated, medium‑tolerance insert such as this can simplify tool selection across a range of difficult‑to‑machine alloys. The combination of a modern coating system and a robust substrate reduces the frequency of index changes and supports longer intervals between tool inspections. Where surface finish and dimensional consistency matter, the stable cutting edge and optimised chip control contribute directly to part quality, while the insert’s design promotes efficient use of inventory and predictable maintenance intervals. For machining rostfreier Stahl and high‑temperature alloys with reliable tool life, contact Metav Werkzeuge to discuss the Walter Tools SCMT09T308-RM4 WSM30S insert and its suitability for specific applications; expert advice and order support are available via Metav Werkzeuge. Technical Data SKU: SCMT09T308-RM4-WSM30S-WALTER Article: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT09T308-RM4 WSM30S Walter Tools Manufacturer: Walter Tools Facts Grade / Sort: WSM30S Series: Tiger·tec Silver Geometry: Square 90° Plate size: 09 Relief angle: 7° Corner radius: 0.8 mm Chipbreaker: RM4 Plate thickness: T3 Tolerance class: M Material designation: S / M Special features Coated hardmetal grade Suitable for rostfreier Stahl (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Designed for stable chip formation and edge strength FAQ What materials is this insert intended for? The SCMT09T308‑RM4 WSM30S insert is designed for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), benefiting from the Tiger·tec Silver coating for improved heat resistance. How does the RM4 chipbreaker help on the shop floor? The RM4 chipbreaker shapes and breaks chips reliably in cohesive materials, improving evacuation and reducing recutting when machining difficult alloys with the Walter Tools insert. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and distributes cutting forces, helping to maintain dimensional stability and reduce edge chipping on demanding cuts. Is this insert suitable for interrupted cuts or heavy feeds? Yes; the combination of the coated substrate, T3 thickness and a robust corner radius delivers the mechanical stability required for interrupted cuts and heavier feeds in production. How many indexable corners are available with this geometry? The square 90° form provides four cutting corners per insert, supporting cost‑efficient indexing and predictable tool usage. Protected trademarks and brand names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The article offered is original, factory‑new goods of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SCMT09T308-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the RP4 chipbreaker to secure longer tool life and predictable chip control in steel turning operations; combine this with the universal WPP10G grade for consistent productivity across a wide range of steels. Order through Metav Werkzeuge or consult the technical team for application guidance. SCMT09T308-RP4 WPP10G turning insert – Tiger·tec Gold coated, RP4 chipbreaker (Walter Tools) The SCMT09T308-RP4 WPP10G is a square 90° turning insert designed for machining Stahl in medium cutting conditions, offering robust chip control and extended tool life. Tiger·tec Gold coating for long tool life Universal WPP10G grade for Stahl machining RP4 chipbreaker for controlled chip formation Square 90° insert with 0.8 mm nose radius Durable coating for extended tool life and consistent edge performance The Tiger·tec Gold multilayer coating delivers improved wear resistance and thermal stability compared with standard grades, extending service intervals and reducing unplanned tool changes. This coating technology, combined with the WPP10G grade, is formulated to balance hardness and toughness for reliable performance across unalloyed and alloyed Stahl, which helps to lower operating costs through longer insert life and fewer tool regrinds. For shops aiming to reduce downtime while maintaining surface quality, the coating offers quantifiable advantages in tool longevity. Controlled chips and safer production with the RP4 geometry The RP4 chipbreaker is engineered for reliable chip control in turning operations, producing predictable, compact chips that reduce the risk of entanglement and improve evacuation. The square 90° form and 0.8 mm nose radius support stable cutting forces and enable reproducible geometries in routine turning tasks. By stabilising chip flow and cutting behaviour, the geometry contributes directly to process security and repeatable component quality in batch production. Optimised for the ISO P group — practical versatility in Stahl applications Selected for the ISO P material group, this insert is suitable for a broad spectrum of Stahl types encountered in general machining. Its combination of grade and geometry allows efficient material removal in finishing and medium roughing, while maintaining surface integrity. The insert’s tolerance class M and consistent cutting edge preparation provide predictable tool life, making it a dependable choice for mixed-production environments where material mix varies between standard structural steels and alloyed grades. Integration into production for predictable throughput and maintenance planning With a standard SCMT09T308-RP4 designation and compact dimensions, the insert integrates easily into common toolholders and automated change systems. The design supports efficient re-indexing and inventory rotation, helping to simplify tool management and cost accounting. When paired with Walter Tools’ product range and supported by Metav Werkzeuge’s application advice, workshops gain a measurable uplift in process efficiency and planning reliability, facilitating smoother production runs and improved overall equipment effectiveness. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts, delivery options and compatibility with existing toolholders via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SCMT09T308-RP4-WPP10G-WALTER Article name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT09T308-RP4 WPP10G Walter Tools Manufacturer: Walter Tools ISO designation: SCMT09T308-RP4 WPP10G Series: Tiger·tec Gold Facts Plate size: 09 Nose radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Tolerance class: M Shape: Square 90° Execution: T Special features Grade: WPP10G Chipbreaker: RP4 Coating technology: Tiger·tec Gold Material application: Stahl (ISO P group) Material code: P FAQ What types of material is this insert intended for? The insert is specified for the ISO P group and is intended primarily for Stahl machining; the WPP10G grade and Tiger·tec Gold coating optimise wear resistance and chip control for these materials. How does the RP4 chipbreaker affect production reliability? The RP4 geometry produces compact, controlled chips that improve evacuation and reduce the risk of tool and part damage, enhancing process security and repeatable component quality when using the SCMT09T308-RP4 WPP10G insert. Is the insert suitable for finishing and roughing operations? Yes; the combination of a 0.8 mm nose radius and the universal WPP10G grade permits efficient finishing and medium roughing operations in Stahl, delivering a balance between cutting performance and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools (Walter AG, brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The mention of brand names and trademarks is for explanatory purposes only and does not imply any connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SCMT09T308-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the universal WPP20G grade to achieve stable chip formation and reliable performance when machining steel; order the SCMT09T308-RP4 WPP20G insert directly via Metav Werkzeuge or consult our specialists for application advice. SCMT09T308-RP4 WPP20G — square 90° turning insert, Tiger·tec Gold coating, Walter Tools SCMT09T308-RP4 WPP20G is a square 90° insert designed for robust turning and boring applications in steel, featuring a 0.8 mm corner radius and a 7° clearance angle for consistent engagement Square 90° insert for robust turning Tiger·tec Gold coated for longer life Universal WPP20G grade for steel machining 0.8 mm corner radius for reliable finishes Higher productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance of wear resistance and toughness tailored for steel machining. As a coated carbide insert, it resists abrasion and maintains cutting-edge integrity under the thermal and mechanical loads typical of ISO P materials. The integrated RP4 chipbreaker supports controlled chip formation, which reduces the risk of build-up and helps maintain consistent cycle times. These characteristics translate into fewer tool changes and improved uptime on production lathes and live-tooling centres. Consistent part quality with a sturdy geometry A square 90° plate form combined with a 0.8 mm corner radius provides edge strength for shoulder and profiling cuts while still allowing a good surface finish. The plate thickness T3 and the medium tolerance class M ensure sufficient rigidity for repeatable machining conditions. This geometry limits deflection in interrupted cuts and helps sustain dimensional accuracy across batches, leading to predictable component quality and lower rework rates for series production. Process reliability and wider material coverage The WPP20G grade is formulated as a universal solution for steel applications, accommodating both unalloyed and alloyed steels within ISO P. Its wear behaviour supports steady-state cutting and makes it suitable for mixed production environments where material grades vary. The insert’s design supports higher metal removal rates without disproportionate tool wear, contributing to shorter cycle times and improved overall process efficiency. Where tighter surface requirements or special alloys are in use, the insert’s robustness provides a reliable baseline for process optimisation. Practical handling and shop-floor benefits The insert’s identification as SCMT09T308-RP4 WPP20G simplifies tooling lists and reordering in busy production settings. Its universal orientation reduces the number of tool variants required in the tool crib, while the chipbreaker geometry helps with chip evacuation in standard turning and boring operations. If additional process data or cutting parameters are required for specific machine tools or materials, further technical guidance is available from our team to support setup and feed/speed selection — ensuring rapid integration into existing workflows. Contact Metav Werkzeuge for tailored application support and recommendations on the Walter Tools SCMT09T308-RP4 WPP20G insert or to request detailed cutting data and availability Technical Data SKU: SCMT09T308-RP4-WPP20G-WALTER Article designation: SCMT09T308-RP4 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 09 Plate form: Square 90° Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Material application: Steel (ISO P) Design optimised for stable chip formation and productive turning FAQ What materials is this insert suited for? The SCMT09T308-RP4 WPP20G insert from Walter Tools is intended primarily for ISO P materials, meaning it is optimised for unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance under the heat and abrasion typical of steel machining, resulting in longer usable tool life and more consistent performance. What is the benefit of the RP4 chipbreaker? The RP4 chipbreaker promotes predictable chip formation and evacuation during turning and boring, reducing the likelihood of chip entanglement and improving process reliability on the shop floor. Can this insert be used for finishing and shoulder cuts? Yes — the 0.8 mm corner radius and square 90° geometry make the insert suitable for shoulder cuts and operations where a combination of edge strength and surface finish is required. Hersteller: Walter AG; Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a leading manufacturer of precision cutting tools. Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com