SCMT060204-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WMP20G grade for secure chip formation, and the compact square form for stable turning operations; order the insert via Metav Werkzeuge or contact the consultants for tailored application advice. SCMT060204-FM4 WMP20G indexable turning insert, Tiger·tec Gold — for rostfreier Stahl | Walter Tools The SCMT060204-FM4 WMP20G is a square 90° indexable turning insert designed for robust machining of rostfreier Stahl under medium to demanding conditions, providing stable cutting performance with an optimised FM4 chipbreaker. Tiger·tec Gold coating for wear resistance Optimised FM4 chipbreaker for secure chip control Square 90° form with 0.4 mm corner radius Designed for rostfreie Stahl machining (ISO M) Increase process reliability when machining rostfreier Stahl The combination of the Tiger·tec Gold coating and the WMP20G carbide grade is engineered to control heat and wear during continuous turning operations of rostfreier Stahl. The coated hardmetal composition is designed to reduce flank wear and support stable edge integrity under the higher temperatures and work-hardening tendencies of stainless materials. This results in more predictable tool life and fewer unplanned tool changes, which supports higher uptime in production environments. The FM4 chipbreaker contributes to consistent chip geometry, which aids automatic conveyor and coolant efficiency while reducing the risk of built-up edge. Precise geometry for repeatable surface quality and edge security The insert’s square 90° form and 0.4 mm corner radius deliver a reliable compromise between strength and finish: the small corner radius supports fine turning and dimensional control, while the square shape offers four usable cutting edges for economical indexing. The relief angle of 7° reduces rubbing on the flank and helps maintain a clean cutting action. Size and thickness are coded for standard toolholders (size 06, thickness 02), enabling straightforward integration into existing tool assemblies. Together, these geometric parameters are selected to balance cutting forces and surface integrity, making the insert suitable where repeatable part quality is essential. Application benefits: productivity, repeatability and low risk The FM4 chipbreaker, paired with the coating and grade characteristics, is aimed at optimising chip flow and minimising interruptions from entangling or long chips in rostfreier Stahl turning tasks. In practice, this means fewer stoppages for chip clearance and a reduced tendency for scratch marks caused by errant chips. The insert has been developed for production and job-shop contexts where process security and reproducible results are priorities. As part of Walter Tools’ portfolio, the design supports predictable tool life and simplified grade selection when switching between similar stainless workpieces. For machining rostfreier Stahl with the reliability of Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for individual application support and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: SCMT060204-FM4-WMP20G-WALTER Designation: SCMT060204-FM4 WMP20G Product type: indexable turning insert (drehwendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Square 90° Size code: 06 Thickness code: 02 Special features Grade: WMP20G Chipbreaker: FM4 Tolerance class: M Execution: T Material group suitability: rostfreier Stahl (ISO M) FAQ What materials is this insert intended for? The SCMT060204-FM4 WMP20G insert is intended primarily for rostfreier Stahl (ISO M), with the grade and chipbreaker tuned for the toughness and heat characteristics of those alloys. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the SCMT060204-FM4 WMP20G promotes controlled chip formation and evacuation, which reduces interruptions and supports consistent surface finish when turning rostfreier Stahl. What are the key geometric advantages of the square form? A square 90° form provides four indexing positions per insert, improving economy, while the 0.4 mm corner radius balances edge strength and surface precision for repeatable part quality. Is the insert compatible with standard toolholders? The insert uses standard coding (size 06, thickness 02) and is compatible with conventional toolholders designed for SCMT-style inserts; toolholder geometry should be checked for correct seat and clearance. Walter Tools is a brand of Walter AG and belongs to the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Mark names and trade designations are mentioned solely for clarification; there is no affiliation between Metav Werkzeuge and the named brands. The offered article is original and factory-new.
SCMT060204-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Silver coating, stable chip control and precise geometry for consistent productivity in stainless steel turning. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. SCMT060204-FM20S WMP20S – Indexable Turning Insert, 0.4 mm Corner Radius, 7° Clearance (Walter Tools) A SCMT060204-FM20S WMP20S indexable insert designed for reliable machining of stainless steel under medium to robust conditions. Tiger‑tec Silver coated grade WMP20S Optimised FM4 chipbreaker for stable cutting Square 90° form for versatile turning operations 0.4 mm corner radius for consistent surface finish Consistent chip control for stainless steel machining The Tiger‑tec Silver-based grade WMP20S delivers a balanced combination of wear resistance and toughness tailored for stainless steel. The coated tungsten carbide composition supports stable chip formation, which reduces the risk of built-up edge and improves cycle-time predictability. In practice, this means fewer interruptions for chip clearing and a steadier process window during medium to robust machining tasks. Precision geometry that protects the cutting edge With a 0.4 mm corner radius and 7° clearance, the insert geometry is tuned to produce reproducible surface quality while maintaining edge integrity. The FM4 chipbreaker promotes short, controllable chips that evacuate reliably in typical turning setups, reducing surface damage and machine downtime. The square 90° format offers rigid support and simple indexing for repeatable positioning and efficient tool path planning. Productivity gains through longer tool life and process security The combination of the Tiger‑tec Silver coating and the WMP20S grade yields improved tool life under thermal and mechanical stress typical of stainless steel workpieces. The indexable insert strategy reduces tooling costs per component by enabling fast re-indexing or replacement without reclamping the holder. For production environments seeking consistent part quality and fewer tool changes, this insert supports higher uptime and easier process standardisation. For tailored recommendations on integrating Walter Tools Tiger‑tec Silver inserts into existing toolholders or for assistance selecting the optimal grade for a given stainless steel alloy, contact Metav Werkzeuge: eMail info@metav-werkzeuge.com | Tel +49 2822 7131930 — consulting and supply available to support fast implementation Technical data Article number: SCMT060204-FM4-WMP20S-WALTER Designation: SCMT060204-FM4 WMP20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WMP20S Core technical data Corner radius: 0.4 mm Clearance angle: 7° Plate form: Square 90° Insert size: 06 Plate thickness: 02 Special features Chipbreaker: FM4 Coating technology: Tiger‑tec Silver Material code: M (suitable for stainless steel) Execution: T FAQ What materials is this insert suitable for? The SCMT060204-FM4 WMP20S insert is formulated for machining stainless steel (material group M) and performs well in medium to robust cutting conditions where stable chip control is required. How does the FM4 chipbreaker affect cutting performance? The FM4 chipbreaker ensures reliable fragmentation and evacuation of chips in stainless steel turning, promoting consistent surface finish and reduced tendency for built-up edge when using the WMP20S grade. Is the 0.4 mm corner radius suitable for finishing passes? A 0.4 mm corner radius offers a balance between edge strength and surface quality; it is appropriate for many finishing and semi-finishing operations where a robust edge is still required. Can the insert be used in standard square toolholders? The square 90° form of the insert is compatible with standard holders designed for SCMT‑type geometries; confirmation with the specific holder manufacturer is recommended for optimal seating and clamping. What process benefits does the Tiger‑tec Silver technology bring? Tiger‑tec Silver coating provides enhanced wear resistance and thermal stability, which together contribute to longer tool life, improved process security and more consistent part quality in challenging stainless steel operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
SCMT060204-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a robust combination of thermal resistance and stable chip control for high‑performance turning in stainless steel and heat‑resistant alloys. The coated carbide grade and optimised FM4 chipbreaker ensure consistent cutting edge life and predictable component finishes; order via Metav Werkzeuge or consult our technical team for cutting‑data recommendations. SCMT060204-FM4 WSM20S square 90° indexable turning insert — Tiger‑tec Silver by Walter Tools SCMT060204-FM4 WSM20S is a square 90° indexable insert designed for heavy‑duty turning and finishing of stainless steel and heat‑resistant superalloys Tiger‑tec Silver coated carbide grade WSM20S Optimised FM4 chipbreaker for secure chips 7° clearance and 0.4 mm corner radius Square 90° insert, size 06, thickness 02 Reliable machining of stainless steel and superalloys for constant productivity The Tiger‑tec Silver coating combined with the WSM20S substrate provides a balanced resistance to heat and wear, which is essential when machining stainless steel and high‑temperature alloys. The coating technology reduces adhesion and protects the cutting edge against thermal degradation, enabling longer tool life under demanding conditions. This results in fewer indexings and a more predictable process, supporting consistent cycle times on production lines. Secure chip formation and improved surface quality through geometry Equipped with an FM4 chipbreaker and a 0.4 mm corner radius, the geometry promotes controlled chip flow and reduces the risk of built‑up edge on tough materials. The insert’s 7° clearance minimises rubbing while maintaining adequate cutting contact, which contributes to a better surface finish and reduced workpiece heat input. For shops seeking predictable outcomes, these features translate into fewer reworks and stable dimensional results. Process reliability and efficiency for industrial turning operations Offering high process reliability, the insert is engineered to support repeatable performance in serial production. Walter Tools development focuses on a robust cutting edge and broad applicability, which helps to shorten setup times and reduce tool inventory complexity. Favourable wear rates and thermal stability lower overall tool consumption, improving productivity and supporting cost‑efficient machining of challenging alloys. Practical compatibility and selection guidance for toolrooms The square 90° format and the SCMT ISO specification make this insert compatible with a wide range of standard turning toolholders for 90° cutting applications. The coated carbide construction suits both roughing and finishing passes depending on cutting data and holder rigidity. For customers seeking exact cutting speeds and feeds, the SCMT060204-FM4 WSM20S can be matched to holder choice and machine rigidity to achieve the intended balance of material removal rate and surface quality. For optimised results in stainless steel and superalloys, request cutting‑data advice from Metav Werkzeuge or procure the SCMT060204‑FM4 WSM20S through Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SCMT060204-FM4-WSM20S-WALTER Designation: SCMT060204-FM4 WSM20S Manufacturer: Walter Tools Facts Insert form: Square 90° Size: 06 Corner radius: 0.4 mm Thickness: 02 Clearance angle: 7° Special features Chipbreaker: FM4 Grade / coating: Tiger‑tec Silver, coated carbide WSM20S Tolerance class: M Suitable materials: stainless steel (ISO group M), heat‑resistant superalloys / titanium (ISO group S) Execution: T (top geometry / specification) FAQ What materials is this insert intended for? The SCMT060204‑FM4 WSM20S turning insert from Walter Tools is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S). How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes controlled chip formation and evacuation, improving process stability and surface quality when machining tough alloys with the SCMT060204‑FM4 WSM20S. What are the key geometry specifications to consider? Important specifications include the square 90° shape, a 0.4 mm corner radius and a 7° clearance angle; together they influence cutting forces, tool engagement and final surface finish. Is the insert suitable for both roughing and finishing? Yes, the coated carbide grade and the FM4 geometry allow flexibility for roughing and finishing operations depending on cutting parameters and holder rigidity with the SCMT060204‑FM4 WSM20S. Which toolholders are compatible with this insert? Standard ISO toolholders for SCMT inserts will accept the square 90° insert; match holder rigidity and clearance requirements to the SCMT060204‑FM4 WSM20S for best results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered item is original and brand‑new from the manufacturer. Walter Tools: The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metal machining and is part of the Sandvik group.
SCMT060204-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability and the FP4 chipbreaker for consistent productivity and predictable chip control in Stahl turning; order the SCMT060204-FP4 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. SCMT060204-FP4 WPP10G indexable turning insert — FP4 chipbreaker, Tiger·tec Gold, Walter Tools SCMT060204-FP4 WPP10G is a square 90° indexable turning insert designed for efficient turning of Stahl components in production environments Tiger·tec Gold coating for extended tool life FP4 chipbreaker for controlled chip formation 7° relief angle for cutting stability 0.4 mm corner radius for improved surface finish More parts per tool: increase uptime with a wear-resistant grade The combination of the WPP10G carbide grade and the Tiger·tec Gold coating provides a robust cutting edge engineered for high productivity. The coated hardmetal composition is optimised for the thermal and mechanical conditions typical when machining Stahl, which translates into more consistent tool life and fewer insert changes. As a result, machining cycles remain stable and machine uptime improves, supporting predictable production rhythms and reduced process interruptions. Reliable chip control for safer, more efficient turning The insert’s FP4 chipbreaker is designed to form manageable chips across a broad range of feeds and depths of cut, reducing the risk of entanglement and improving throughput. Controlled chip breakage contributes directly to operator safety and simplifies chip handling downstream. At the same time, the 7° relief geometry supports stable cutting forces, so the insert maintains cutting performance even under medium-duty turning conditions. Precision finishes with consistent edge geometry With a square 90° form and a 0.4 mm corner radius, this insert produces predictable radii and repeatable surface quality in contouring and finishing passes. The tolerance class M ensures consistent dimensions across batches, which benefits setups that demand interchangeability and repeatable results. The product’s geometry and coating synergy reduce the need for secondary finishing while maintaining the dimensional accuracy required in modern metalworking. For a tailored recommendation on using Walter Tools Tiger·tec Gold inserts in production—including availability and suitable grades for specific Stahl alloys—contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss options and delivery Technical data Article number: SCMT060204-FP4-WPP10G-WALTER Designation: SCMT060204-FP4 WPP10G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core dimensions and numbers Insert size: 06 Thickness: 02 Relief angle: 7° Corner radius: 0.4 mm Geometry: Square 90° Chipbreaker: FP4 Tolerance class: M Materials and special features Grade: WPP10G (coated carbide, Tiger·tec Gold) Suitable for: Stahl (ISO group P) Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suitable for? The SCMT060204-FP4 WPP10G insert is specified for machining Stahl (ISO group P) and is optimised for the heat and chip characteristics of steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on this Walter Tools insert promotes controlled chip formation, improving chip evacuation and contributing to safer, more efficient turning cycles. Is the WPP10G grade suitable for finishing and roughing? WPP10G, as part of the Tiger·tec Gold family, offers a balanced mix of wear resistance and toughness, making it suitable for a wide range of applications from general-purpose turning to light finishing on Stahl. What geometry should the toolholder have for this insert? A toolholder compatible with square 90° inserts and the SCMT clamping system is required; ensure the holder provides the correct seating for the 06 size and supports the 7° relief angle for optimal performance. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance, robust E47 chip control and precise geometry for reliable steel machining; order directly via Metav Werkzeuge or consult technical advisers for application support. SCMT09T304-E47 WPP20G Drilling/Boring Indexable Insert for Stahl, Tiger‑tec Gold (Walter Tools) SCMT09T304-E47 WPP20G is a square 90° indexable insert optimised for drilling and boring in Stahl, offering a balanced mix of wear resistance and process stability for industrial machining. Tiger‑tec Gold coated grade WPP20G Designed for Stahl machining Square 90° geometry, 0.4 mm corner radius 7° clearance angle for secure cutting Prolonged tool life through advanced coating technology The coated carbide grade WPP20G from the Tiger‑tec Gold family provides improved wear resistance and consistent edge stability under typical steel cutting temperatures. This coating reduces flank wear and helps maintain cutting geometry for longer tool life, which in turn supports predictable process windows and fewer tool changes. For production environments where uptime and reproducible performance matter, the combination of coating and substrate enables more consistent component quality and lower per-part tooling costs. Stable cutting with geometry tuned for holemaking A square 90° plate form combined with a 0.4 mm corner radius and a 7° clearance angle stabilises the cutting edge during drilling and boring operations, reducing chatter and improving surface finish. The integrated E47 chipbreaker promotes controlled chip formation and evacuation, which is crucial in interrupted cuts and deep-hole operations. For those less familiar with chipbreakers: they shape how the metal is segmented during cutting, directly affecting heat dissipation and tool wear; the result is fewer rework cycles and improved process reliability. Consistent accuracy and economical machining cycles Classified to tolerance M and supplied in a robust plate thickness T3, this insert supports repeatable seatings and reliable indexability in tool holders. The stable cutting behaviour contributes to predictable tool life and minimised machine downtime. As a result, workshop throughput becomes more economical: fewer unscheduled tool replacements, steady cycle times and consistent component tolerances. The technical design makes the insert well suited for medium to high-volume production where repeatability and surface integrity are priorities. Application guidance and compatibility with typical steels Engineered specifically for the ISO group P (Stahl), this insert is intended for the machining of unalloyed and alloyed steels where typical heat and chip characteristics occur. The plate size and form suit a range of drilling and boring tool bodies; selection should be matched to cutting parameters, hole depth and machine rigidity. Should additional technical data or process recommendations be required, Metav Werkzeuge offers application advice and material‑specific parameter guidance by email or phone to ensure optimal setup. Choose the Walter Tools SCMT09T304-E47 WPP20G for robust Stahl machining — contact Metav Werkzeuge to discuss tool selection and availability. Technical Data SKU: SCMT09T304-E47-WPP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte SCMT09T304-E47 WPP20G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Series / coating: Tiger‑tec Gold, grade WPP20G Chipbreaker: E47 Material designation: P (Stahl) Designation without grade: SCMT09T304-E47 ISO designation: SCMT09T304-E47 WPP20G FAQ What materials is this insert suitable for? The insert is designed for the ISO group P and is suitable for machining Stahl; the WPP20G grade is optimised for the heat and chip characteristics typical of steel. How does the E47 chipbreaker affect machining? The E47 chipbreaker promotes consistent chip segmentation and evacuation, reducing the risk of chip re-cutting and contributing to a more stable cutting process with improved surface quality. Can this insert be used in standard drilling toolholders? Yes, the insert’s square 90° geometry and standard ISO designation make it compatible with matching drilling and boring toolholders designed to accept the SCMT09T304-E47 form. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances wear resistance and edge durability, resulting in longer tool life and more predictable performance when machining Stahl. How should the corner radius influence parameter selection? The 0.4 mm corner radius balances strength and sharpness; choose cutting parameters that match machine rigidity and desired surface finish to exploit the radius for stable cutting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for descriptive purposes and do not imply any affiliation or endorsement. The described article is an original, factory‑new product of the stated manufacturer (Walter Tools).
SCMT09T304-E47 WPP20S Wendeplatten - Walter Tools
The SCMT09T304-E47 WPP20S insert pairs Tiger·tec Silver coating with a robust WPP20S carbide grade and a chipbreaker optimised for steel, delivering extended tool life and consistent chip control; order directly via Metav Werkzeuge or consult our specialists for application support. SCMT09T304-E47 WPP20S drilling/reaming indexable insert by Walter Tools — Tiger·tec Silver, for steel SCMT09T304-E47 WPP20S is a square 90° indexable insert designed for drilling and bore-enlarging operations, intended primarily for efficient machining of steel in production and workshop environments. Tiger·tec Silver coating for long tool life Grade WPP20S optimised for steel machining Square 90° shape for secure seating 0.4 mm corner radius for edge stability Maximise productivity with proven cutting performance The combination of the Tiger·tec Silver coating and the WPP20S carbide substrate provides a balance between wear resistance and toughness that reduces downtime and keeps cycle times steady. The insert is designed for the thermal and chip-formation behaviour typical of steel machining, so tool changes are less frequent and process stability improves. The integrated chipbreaker E47 supports continuous chip control, which lowers the risk of rework and machine stoppages — a direct benefit to production output and cost-efficiency. Geometry and coating explained for dependable results A 7° free angle and a 0.4 mm corner radius create a secure cutting edge that tolerates interruptions and maintains dimensional stability during bore enlargement. The square 90° form provides stable clamping in compatible tool holders and ensures predictable wear progression across indexed edges. The insert thickness T3 and the SCMT designation describe the geometry that matches common drilling/reaming tool bodies; these dimensions contribute to reliable seating and vibration resistance. The Tiger·tec Silver coating is a multilayer solution that improves oxidation resistance and preserves the cutting edge under elevated temperatures. Practical application advice for workshops and small series production This insert is assigned to ISO group P (steel), making it suitable for a broad range of unalloyed and alloyed steels encountered in general engineering. The grade allocation emphasises universality and wear resistance, which means fewer tool variants need to be stocked for mixed steel work. In practice, the insert performs well in bore finishing and light reaming passes where consistent surface quality and repeatable diameters are required. For optimisation, pairing the insert with a holder compatible with SCMT geometry and ensuring correct clamping torque will maintain accuracy and extend service life. Contact Metav Werkzeuge for Walter Tools Tiger·tec Silver inserts to discuss tailored cutting parameters and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCMT09T304-E47-WPP20S-WALTER Designation: SCMT09T304-E47 WPP20S Label: Bohr-/Aufbohrwendeschneidplatte SCMT09T304-E47 WPP20S Walter Tools Series: Tiger·tec Silver Grade: WPP20S Execution: T Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coated carbide grade (Tiger·tec Silver) Chipbreaker: E47 Designed for steel (ISO P) Stable chip formation and good edge security Suitable for drilling and bore-enlarging operations FAQ What materials is this insert suitable for? The SCMT09T304-E47 WPP20S insert is intended for ISO group P, specifically for unalloyed and alloyed steel, as indicated by its WPP20S grade and Tiger·tec Silver coating. What does the SCMT09T304-E47 designation indicate? The SCMT09T304-E47 code describes the insert geometry: square 90° shape, size 09, edge form E47 and the nominal thickness/execution suited to compatible tool holders. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating increases oxidation resistance and wear life, allowing the insert to maintain cutting-edge integrity under the heat and stresses typical of steel machining. Is the corner radius suitable for interrupted cuts? The 0.4 mm corner radius offers a compromise between edge strength and cutting precision, making it appropriate for many drilling and bore-enlarging applications that may involve slight interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanation purposes only; there is no affiliation between our company and the brands listed. The offered article is an original, factory-new product of the respective manufacturer.
SCMT09T304-E47 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WSM10S grade and a compact square geometry for reliable chip control and extended edge life; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. SCMT09T304-E47 WSM10S Drill/boring indexable insert for rostfreier Stahl — Walter Tools The SCMT09T304-E47 WSM10S is a coated carbide indexable insert from the Tiger·tec Silver series, engineered for drilling and boring tasks in rostfreier Stahl and heat‑resistant alloys where secure chip formation and edge stability are required. Tiger·tec Silver coated carbide grade WSM10S For rostfreier Stahl and heat‑resistant alloys 7° relief angle with 0.4 mm corner radius Square 90° insert, chipbreaker E47 Improved process stability for difficult‑to‑machine materials The combination of the Tiger·tec Silver coating and the WSM10S grade provides enhanced thermal resistance and wear performance when machining rostfreier Stahl and superalloys. The coated carbide composition supports stable chip formation, reducing the tendency for built‑up edge and ensuring more predictable cutting behaviour. For production environments this translates into fewer unscheduled tool changes and a steadier machining cycle, which helps to maintain throughput on series runs. Reliable edge control and consistent surface quality The insert’s geometry — a Square 90° form with a 0.4 mm corner radius and a 7° relief — promotes robust cutting edges and consistent surface finish on internal bores and reamed features. The chipbreaker E47 is designed to control chip shape under difficult conditions, preventing long, thread‑forming swarf and improving evacuation. The relief angle reduces rubbing and heat generation at the flank, so the tool spends more time cutting and less time suffering premature edge deterioration. Designed for productive tool handling and predictable intervals A square insert offers multiple indexed cutting edges, which allows economical utilisation of the insert body and fast replacement in the toolholder. The T3 plate thickness and the M tolerance class ensure a stable clamping interface and repeatable seat position, supporting tight process windows. In continuous production, these attributes contribute to lower unit costs through extended edge life and reduced downtime, while the clear ISO grouping (S / M) simplifies tool selection for rostfreier Stahl and heat‑resistant materials. Secure consistent machining with Walter Tools' SCMT09T304-E47 WSM10S — contact Metav Werkzeuge for tailored technical advice and reliable supply. Technical Data Article number: SCMT09T304-E47-WSM10S-WALTER Article name: Bohr-/Aufbohrwendeschneidplatte SCMT09T304-E47 WSM10S Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte (Drill/boring indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate form: Square 90° Thickness: T3 Tolerance class: M Special features Grade: WSM10S (coated carbide) Chipbreaker: E47 Material suitability: S / M Suitable for: rostfreier Stahl (M) Short designation: SCMT09T304-E47 FAQ What materials is this insert suitable for? The SCMT09T304-E47 WSM10S insert is specified for S and M groups; it is particularly suitable for rostfreier Stahl and heat‑resistant superalloys. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the WSM10S grade increases thermal stability and wear resistance, helping the insert to maintain edge integrity during extended machining cycles. What is the advantage of the 0.4 mm corner radius? A 0.4 mm corner radius improves edge strength and supports a consistent surface finish while reducing the risk of chipping on interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
SCMT09T304-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Combines a WSM20S grade and Tiger‑tec Silver coating for secure edge stability in demanding stainless steels and heat‑resistant alloys. The square 90° geometry with a 0.4 mm corner radius and E47 chipbreaker ensures consistent hole quality and process security. Order directly via Metav Werkzeuge or consult the specialists for application-specific parameters. SCMT09T304-E47 WSM20S drill/reaming indexable insert, Tiger‑tec Silver — Walter Tools SCMT09T304-E47 WSM20S is a square 90° indexable insert engineered for drilling and boring in stainless steels and heat‑resistant superalloys Tiger·tec Silver coating technology Grade WSM20S for tough alloys Square 90° form, 0.4 mm corner radius 7° clearance angle for secure cutting Reliable performance in difficult materials The WSM20S grade, combined with Tiger‑tec Silver, is formulated for machining stainless steels and superalloys where heat and material tenacity demand a robust solution. The coated carbide substrate increases thermal resistance and supports stable chip formation, reducing the risk of built‑up edge and unexpected tool failure. This translates into more consistent hole quality and fewer interruptions on the shop floor when working with materials that are otherwise prone to work hardening. Geometry that improves hole accuracy and repeatability A square 90° plate form with a 0.4 mm corner radius and an E47 chipbreaker provides predictable cutting behaviour in drilling and boring operations. The 7° clearance contributes to reliable chip evacuation and lower cutting forces, which helps maintain concentricity and surface finish in through‑hole and blind‑hole applications. These geometric choices are designed to reduce vibration and support reproducible results across batch production. Productivity through tool life and process security The insert’s combination of grade and coating supports extended tool life under severe conditions, improving overall productivity. Stable cutting edges and controlled chip segmentation reduce downtime and tool changes, which is particularly valuable for high‑mix or volume production. The result is a balance between performance and economy: fewer interruptions and more predictable component quality without compromising machining speed where the workpiece allows. Practical application and pairing recommendations For best results pair the insert with drilling/boring toolholders optimised for indexable inserts and select cutting parameters according to workpiece alloy and diameter. When machining stainless steels or heat‑resistant alloys, favour moderate feeds and appropriate coolant strategies to avoid thermal shock to the cutting edge. The SCMT09T304-E47 WSM20S insert performs well in routines requiring stable chip control; Metav Werkzeuge can advise on matching holders and parameter windows for specific machines and components. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts and guidance on cutting data or toolholder pairing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SCMT09T304-E47-WSM20S-WALTER Designation: SCMT09T304-E47 WSM20S Product type: drill/reaming indexable insert Facts Size: 09 Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Plate form: Square 90° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: E47 Material suitability: S / M (superalloys, stainless steels) Application: drilling and reaming operations FAQ Which materials is this insert intended for? The SCMT09T304-E47 WSM20S insert is designed primarily for stainless steels and heat‑resistant superalloys (S / M), offering thermal stability and controlled chip formation for these groups. What advantage does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances thermal resistance and reduces friction at the cutting edge, supporting longer tool life and improved process security when machining demanding materials. How does the plate geometry influence machining results? The square 90° form with a 0.4 mm corner radius and E47 chipbreaker delivers stable cutting conditions, improved chip control and repeatable hole quality in drilling and boring tasks. Can the insert be used for general steel machining? This grade is optimised for S / M groups; for general or carbon steel machining a grade tailored to steels should be considered instead of the WSM20S variant. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-FK6 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and an optimised FK6 chipbreaker for reliable wear resistance and consistent chip control in cast‑iron turning; order directly via Metav Werkzeuge or consult our specialists for application advice. SCMT09T304-FK6 WKK10S – Turning indexable insert, Tiger·tec Silver coating for cast iron (Walter Tools) SCMT09T304-FK6 WKK10S is a turning indexable insert designed to combine durable coating technology with a chipformer tuned for abrasive cast‑iron machining Tiger·tec Silver coated carbide grade WKK10S Optimised FK6 chipbreaker for cast iron Square 90° insert with 0.4 mm corner radius Consistent edge stability for productive turning Increased throughput through tailored coating and chip control The Tiger·tec Silver coating in combination with the WKK10S carbide grade delivers improved resistance against abrasive wear and thermal loading during continuous turning operations. This results in longer tool life and fewer changeovers, which raises machine uptime and reduces production interruptions. The coating technology is especially effective where frequent, brittle chip formation occurs, so cycle times and productivity benefit directly from a more stable cutting edge. Stable cutting and predictable chip formation for cast‑iron work The integrated FK6 chipbreaker is engineered for the typical short, breaking chips found when machining cast iron; it channels and controls swarf to reduce recutting and risk of surface damage. A chipbreaker alters chip flow and cutting forces, improving process reliability even under variable conditions. For shops shifting between roughing and finishing passes, the chip control improves repeatability and reduces the need for secondary processes to remove irregularities. Precision geometry for consistent component quality The square 90° form with a 0.4 mm corner radius and a 7° clearance angle provides a robust cutting profile that supports dimensional accuracy and edge stability. The tolerance class M ensures repeatable fitment in standard toolholders and consistent seating against the clamping faces, so each indexation returns predictable geometry. This combination simplifies setup, shortens calibration time and supports uniform surface finishes across batches. For reliable cast‑iron turning with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for tailored advice or to request availability via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: SCMT09T304-FK6-WKK10S-WALTER Designation: SCMT09T304-FK6 ISO designation: SCMT09T304-FK6 WKK10S Manufacturer: Walter Tools Product type: Turning indexable insert Facts Corner radius: 0.4 mm Free angle: 7° Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: FK6 Shape: Square 90° Suitable for: Cast iron (ISO K) FAQ What materials is this insert designed to machine? The SCMT09T304-FK6 WKK10S insert from Walter Tools is designed primarily for cast‑iron machining (ISO group K), with cutting geometry and chip control optimised for abrasive, brittle materials. How does the FK6 chipbreaker improve machining performance? The FK6 chipbreaker guides chip formation into short, manageable segments, reducing recutting and improving surface integrity; this makes the SCMT09T304-FK6 WKK10S particularly effective in continuous cast‑iron turning operations. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and thermal stability, extending the service life of the insert and maintaining edge strength under higher cutting speeds and abrasive conditions. How does the 0.4 mm corner radius affect part quality? A 0.4 mm corner radius balances strength and accuracy: it reinforces the cutting edge against chipping while allowing fine surface finishes and tight dimensional control when used in appropriate feed ranges. Is the insert compatible with standard toolholders? Yes, the insert’s tolerance class M and square 90° form ensure compatibility with common indexable‑insert toolholders, enabling straightforward integration into existing turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
SCMT09T304-FK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, optimised chip control and precise geometry for reliable cast iron production. Benefit from extended tool life, consistent surface quality and predictable performance — order through Metav Werkzeuge or request expert advice from our consultants. SCMT09T304-FK6 WKK20S square 90° turning insert, Tiger‑tec Silver coating — Walter Tools The SCMT09T304-FK6 WKK20S is a square 90° turning insert designed for productive machining of cast iron, featuring a Tiger‑tec Silver coating and an FK6 chipbreaker for controlled chip formation Tiger‑tec Silver coating for wear resistance Optimised FK6 chipbreaker for cast iron machining Square 90° form with 0.4 mm corner radius 7° clearance angle for stable cutting Durable coating for abrasive cast iron work The combination of the Tiger‑tec Silver coating and the WKK20S grade targets the abrasive wear typical of cast iron components. Coating technology provides a protective layer that reduces flank and crater wear, which translates directly into longer tool life and fewer indexings. For production environments where downtime and insert changes are costly, this results in measurable efficiency gains and a more predictable tool-change schedule. Geometry designed for consistent surfaces and dimensional control A square 90° insert with a 0.4 mm corner radius and a 7° clearance angle delivers mechanical stability and repeatable contact conditions during turning. The robust geometry reduces vibration and supports a steady cutting edge, producing reliable surface finish and dimensional accuracy. In practice, this means fewer rework cycles and improved first-pass yield when finishing cast iron components. Chip control that keeps cycles running smoothly The FK6 chipbreaker has been developed specifically for brittle, breaking chips from cast iron. It promotes short, manageable chip segments that evacuate reliably from the cutting zone, lowering the risk of entanglement and interruption. Improved chip control shortens non-productive time and supports higher uninterrupted cycle times, contributing to overall productivity improvements on CNC lathes. Practical use and process integration With a compact T3 thickness and ISO designation matching standard toolholders, the insert integrates easily into established toolpacks for turning cast iron. The substrate and coating combination is optimised for abrasive materials, providing stable edge behaviour under typical cutting forces. For machining strategies, moderate feeds combined with the FK6 geometry usually yield the best balance between tool life and productivity; process trials in the actual production setup are recommended to determine optimal cutting data. For high-performance cast iron turning with Walter Tools’ Tiger‑tec Silver inserts, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SCMT09T304-FK6-WKK20S-WALTER Designation: SCMT09T304-FK6 WKK20S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Shape: Square 90° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: FK6 Application: Cast iron machining Material substrate: coated cemented carbide FAQ What materials is this insert suitable for? The SCMT09T304-FK6 WKK20S is specifically designed for machining cast iron, with the WKK20S grade and FK6 chipbreaker tuned for abrasive, breaking chips typical of these materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases wear resistance and stabilises cutting-edge behaviour, which helps to extend the service life of the insert and maintain consistent results in cast iron turning. Which geometry features contribute to surface quality? The square 90° form together with a 0.4 mm corner radius and 7° clearance provides rigidity and predictable contact, supporting repeatable surface finish and dimensional control. Is the FK6 chipbreaker suitable for continuous production? Yes, the FK6 chipbreaker promotes short, controlled chips in cast iron, reducing interruptions and supporting longer uninterrupted cycle times in series production. Will this insert fit standard SCMT09T3 toolholders? The insert follows the ISO-style designation SCMT09T3 format and is compatible with toolholders designed for SCMT09T3 inserts; appropriate clamping and seat condition are recommended for optimal results. Manufacturer: Walter Tools Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered article is an original, factory-new product of the manufacturer.
SCMT09T304-FM4 WMP20G Wendeplatten - Walter Tools
Choose the combination of Tiger·tec Gold coating and the FM4 chipbreaker for confident machining of stainless steels; the square 90° form with a 0.4 mm nose radius supports a stable cutting edge and consistent surface quality. Order the SCMT09T304-FM4 WMP20G directly via Metav Werkzeuge or ask the consultants for tailored application advice. SCMT09T304-FM4 WMP20G turning insert, square 90°, for stainless steels — Walter Tools A SCMT09T304-FM4 WMP20G indexable turning insert engineered for medium to robust stainless-steel turning, combining a Tiger·tec Gold grade with a dedicated chipformer for reliable swarf control. Tiger·tec Gold coated carbide grade WMP20G Square 90° geometry for edge stability FM4 chipbreaker optimised for stainless steels 0.4 mm nose radius for consistent surface finish High process reliability through tailored grade and coating The insert’s WMP20G grade, part of the Tiger·tec Gold family, offers a coated carbide combination developed for the specific demands of stainless steels. This results in improved edge stability under the high temperatures and work-hardening tendencies typical of these materials. In practical terms, the specialised coating reduces adhesion and supports predictable wear behaviour, which contributes to longer tool life and fewer unplanned tool changes — a direct benefit for shop-floor productivity. Stable cutting performance from geometry and chip control The square 90° configuration and the modest 0.4 mm nose radius provide robust support at the cutting edge, reducing the risk of chipping during interrupted cuts or heavier radial engagement. Combined with the FM4 chipbreaker, this geometry ensures controlled chip formation and evacuation when turning stainless steels, helping to avoid built-up edge and improve surface consistency. The design enables stable turning under varying depths of cut and feed rates. Clear advantages for workshop efficiency Using this insert supports a pragmatic balance between productivity and reliability: the coated grade and chip control help maintain cutting parameters for longer periods, which can lead to fewer tool changes and reduced downtime. The solid build and proven coating technology mean fewer surprises in process planning, enabling confident selection of cutting conditions for a range of stainless-steel grades per ISO M classifications. Application guidance and practical use cases The insert is suited to external turning operations on a variety of stainless steels, including typical martensitic and austenitic grades that require careful management of heat and chip formation. Typical tasks include semi-finish and finish turning where consistent surface quality and repeatable tool life are priorities. For best results, pair the insert with appropriate coolant strategies and adjust feeds to match the nose radius and edge preparation. For production environments requiring dependable stainless-steel performance, choose the Walter Tools WMP20G grade and contact Metav Werkzeuge for specific machining recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SCMT09T304-FM4-WMP20G-WALTER Designation: SCMT09T304-FM4 WMP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Nose radius: 0.4 mm Plate size: 09 Thickness: T3 Shape: Square 90° Special features Grade: WMP20G (Tiger·tec Gold) Chipbreaker: FM4 Coated carbide Application: stainless steels (ISO M) Series: Tiger·tec Gold FAQ What materials is this insert intended for? The SCMT09T304-FM4 WMP20G turning insert from Walter Tools is designed primarily for stainless steels (ISO M), offering improved chip control and edge life in such materials. How does the FM4 chipbreaker help in machining? The FM4 chipbreaker on the Walter Tools insert promotes controlled chip formation during turning of stainless steels, reducing the likelihood of built-up edge and aiding chip evacuation for safer, more stable machining. Which cutting conditions suit the 0.4 mm nose radius best? A 0.4 mm nose radius is ideal for achieving a balance between surface finish and strength; the Walter Tools insert performs well at moderate feeds and finishing to light semi-finishing cuts where consistent surface quality is required. Is this insert suitable for interrupted cuts? The square 90° geometry and robust grade of the SCMT09T304-FM4 WMP20G support resistance to chipping during interruptions, making it appropriate for applications with occasional interruptions or variable engagement. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-FM4 WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated WMP20S carbide grade and a precise FM4 chipbreaker for dependable machining of rostfreien Stahl; order directly via Metav Werkzeuge or request guidance from the sales consultants for tight integration into production. SCMT09T304-FM4 WMP20S — indexable turning insert with Tiger·tec Silver for rostfreien Stahl A SCMT09T304-FM4 WMP20S indexable turning insert engineered for reliable machining of rostfreien Stahl under medium to robust cutting conditions, offering controlled chip formation and consistent edge life. Tiger·tec Silver coating for improved wear resistance Optimised for rostfreien Stahl machining FM4 chipbreaker for secure chip control Square 90° geometry with 0.4 mm corner radius Consistent cutting when machining tough alloys The combination of the Tiger·tec Silver coating and the WMP20S carbide grade delivers a balance between wear resistance and toughness that suits the demands of rostfreien Stahl. The coated carbide resists abrasive wear and thermal softening while the grade itself supports stable cutting edge retention under higher temperatures. This results in reduced tool change frequency and fewer unplanned interruptions to production, which is particularly relevant for shops that machine a range of corrosion-resistant alloys where strain-hardening and built-up edge are common challenges. Geometry that secures surface finish and tool life The square 90° plate form, paired with a 0.4 mm corner radius and a 7° clearance angle, is designed for robust turning tasks where axial and radial loads vary. The FM4 chipbreaker provides a predictable chip form that helps to avoid entanglement and improves evacuation from the cutting zone. The geometric setup supports consistent contact between workpiece and tool, which contributes directly to reproducible surface quality and a longer effective edge life under the specified operating window. Practical benefits for process reliability and integration As an indexable insert from a recognised manufacturer, this grade and geometry allow straightforward replacement and repeatability across a holder family, promoting efficient tool management. The insert’s attributes make it suitable for medium to heavy-duty turning operations on rostfreien Stahl, where process stability and economic tool life are priorities. For integration into an existing cutting strategy, the insert supports predictable performance; machining parameters should be set to match the workpiece properties and machine rigidity to fully exploit the Tiger·tec Silver advantages. For reliable process security with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored application advice and fast availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SCMT09T304-FM4-WMP20S-WALTER Manufacturer: Walter Tools Product type: Turning insert Designation: SCMT09T304-FM4 WMP20S Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate form: Square 90° Thickness: T3 Tolerance class: M Special features Coating technology: Tiger·tec Silver Carbide grade: WMP20S Chipbreaker: FM4 Series: Tiger·tec Silver Suitable for: rostfreien Stahl FAQ What materials is this insert intended for? The SCMT09T304-FM4 WMP20S insert from Walter Tools is optimised for rostfreien Stahl and for medium to robust cutting conditions where secure chip control is required. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver improves wear resistance and thermal stability of the cutting edge; the coating on this insert supports longer edge life and greater process consistency when machining rostfreien Stahl. How does the FM4 chipbreaker influence machining behaviour? The FM4 chipbreaker promotes reliable chip formation and evacuation, reducing the risk of entangling chips and enhancing productivity and safety during turning operations. Why choose a square 90° insert with a 0.4 mm corner radius? Square 90° geometry with a 0.4 mm radius offers robustness for a range of turning operations, improving stability under varying loads and supporting repeatable surface finish results. Is this insert suitable for finishing passes? The WMP20S grade is designed for medium to robust conditions on rostfreien Stahl; finishing passes are possible where machine rigidity and cutting data are optimised, though fine-finishing grades may be preferred for ultra-fine surface requirements. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
SCMT09T304-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Silver coating and an FM4 chipbreaker for secure chip control and stable cutting edges when machining rostfreier Stahl and heat‑resistant alloys. The insert delivers repeatable performance and reduced risk of built‑up edge, helping to keep production running smoothly; order directly via Metav Werkzeuge or contact our consultants for tailored advice. SCMT09T304-FM4 WSM20S – indexable turning insert (Tiger·tec Silver, FM4) by Walter Tools A robust SCMT09T304-FM4 WSM20S indexable turning insert engineered for secure chip formation and edge stability during the machining of rostfreier Stahl and high‑temperature alloys. Tiger·tec Silver coating for edge stability Suitable for rostfreier Stahl and superalloys FM4 chipbreaker for secure chip control Square 90° geometry with 0.4 mm corner radius Consistent performance where heat and toughness challenge process stability The combination of Tiger·tec Silver coating and the WSM20S grade targets applications with elevated temperatures and adhesive tendencies, notably rostfreier Stahl and nickel‑based alloys. The coating enhances thermal resistance and reduces flank wear, which translates into longer tool life and fewer interruptions for index changes. For production environments where cycle time and component surface quality are measured, this insert supports a predictable tool change interval and a stable cutting process. Chip control and surface quality that support reliable throughput Equipped with an FM4 chipbreaker and a 0.4 mm corner radius, the insert promotes controllable chip formation even under unfavourable cutting conditions. Controlled chips minimise machine downtime and ease chip evacuation in automatic systems, while the square 90° geometry contributes to robust axial engagement and consistent part geometry. Together these features improve first‑pass yields and reduce the need for secondary finishing on sensitive parts. Practical selection and machining guidance for workshop integration The insert's specification—short relief angle 7°, thickness T3 and tolerance class M—makes it suitable for turning operations where edge strength and stable geometry are priorities. In practice, select cutting parameters that balance speed and feed to exploit the grade’s thermal properties: modest increases in feed can often improve chip breaking without compromising surface finish. For assistance tuning parameters to specific machines or material batches, Metav Werkzeuge consultants provide application support and cutting‑data recommendations. Contact Metav Werkzeuge for application‑specific advice on Walter Tools inserts, availability and suitable cutting parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance Technical data SKU: SCMT09T304-FM4-WSM20S-WALTER Label: Drehwendeschneidplatte SCMT09T304-FM4 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Core technical data Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Thickness: T3 Geometry: Square 90° Tolerance class: M Special features Coating technology: Tiger·tec Silver Chipbreaker: FM4 Material designation: S / M Intended for: rostfreier Stahl and heat‑resistant superalloys Execution: T FAQ What materials is this insert suitable for? The SCMT09T304-FM4 WSM20S indexable turning insert from Walter Tools is designed for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), providing improved thermal resistance and edge stability. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the Walter Tools insert shapes chips for secure evacuation and reduced entanglement, which supports continuous operation and simplifies handling in automated turning processes. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver increases thermal stability and wear resistance for the WSM20S grade, helping to maintain a stable cutting edge and extend index intervals under demanding conditions. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius offers a compromise between edge strength and surface finish; it helps to avoid premature edge failure while still allowing for good workpiece quality in medium‑ to finishing cuts. Can this insert be used interchangeably in standard toolholders? The insert conforms to the SCMT geometry and can be mounted in compatible toolholders designed for 09‑size, square 90° inserts; verify holder compatibility before assembly. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SCMT09T304-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of high temperature resistance, proven chip control and robust edge stability for reliable turning in stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. SCMT09T304-FM4 WSM30S turning insert — Square 90°, 0.4 mm radius — Walter Tools The SCMT09T304-FM4 WSM30S is a square indexable turning insert developed for demanding applications in stainless steel and heat‑resistant superalloys, offering a balance of thermal endurance and cutting‑edge stability. Tiger·tec Silver coating for high temperature resistance FM4 chipbreaker for reliable chip control Square 90° geometry with 0.4 mm corner radius Improved tool life and process stability for demanding alloys The Tiger·tec Silver coating paired with the WSM30S grade provides enhanced heat resistance and wear protection, which directly supports longer tool life when machining stainless steel or nickel‑based materials. Coating technology reduces adhesion and crater wear at elevated cutting temperatures, so operators benefit from fewer tool changes and more consistent cycle times. The result is measurable improvement in component throughput and a reduction in unplanned downtime, making the insert a cost‑effective choice for batch production and serial turning tasks. Controlled cutting and finer surface quality through optimised geometry The insert’s FM4 chipbreaker and Square 90° geometry work together to produce short, controllable chips and a reliable cutting process. The 0.4 mm corner radius helps to distribute cutting forces and improves fatigue resistance at the cutting edge, which supports repeatable surface finishes and dimensional consistency. For machinists unfamiliar with chipbreaker nomenclature: FM4 denotes a geometry tailored for medium to heavy interrupted cuts and for applications where stable chip formation is critical. This combination enables predictable tool behaviour and simplified process setup. Practical benefits for workshop efficiency and repeatability With a tolerance class of M and the T3 thickness, the insert fits standard toolholders while maintaining the dimensional accuracy needed for serial production. The stable cutting edge and optimised chip control lower the risk of workpiece damage and rework, supporting higher first‑pass yields. As a Walter Tools product, the insert is manufactured to tight quality standards that ease integration into existing tooling systems and support consistent results across shifts. For operations facing mixed batches of stainless and heat‑resistant alloys, this insert offers a practical balance of productivity and reliability. Contact Metav Werkzeuge for tailored application advice on Walter Tools SCMT09T304-FM4 WSM30S inserts and to identify the optimal grades and cutting data for stainless steel and superalloy machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SCMT09T304-FM4-WSM30S-WALTER Designation: SCMT09T304-FM4 WSM30S Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Corner radius: 0.4 mm Relief angle: 7° Insert size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: FM4 Grade: WSM30S Geometry: Square 90° Material suitability: S / M Intended application: machining stainless steel and heat‑resistant superalloys FAQ Which materials is this insert suitable for? The SCMT09T304-FM4 WSM30S insert is designed for stainless steel and heat‑resistant superalloys; the WSM30S grade emphasises thermal endurance and edge stability. What advantage does the FM4 chipbreaker offer? FM4 provides reliable chip control under varying depths of cut, producing short, manageable chips and contributing to a consistent machining process with improved surface quality. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius balances edge strength and finish: it reduces edge chipping at higher feeds while still allowing acceptable surface finishes for many turning operations. Is this insert compatible with standard toolholders? The insert follows common dimensional standards for its designation, so it is compatible with toolholders specified for SCMT‑style square inserts when the correct seat and clamping are used. What does tolerance class M mean for production? Tolerance class M indicates medium tolerance suitable for general turning tasks where consistent fit and repeatability are required across production lots. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of Walter Tools. The Walter AG (market appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
SCMT09T304-FM6 WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a FM6 chipbreaker and a compact 90° square geometry for consistent chip control and extended tool life in demanding materials; order this turning solution directly via Metav Werkzeuge or contact our consultants for application advice. SCMT09T304-FM6 WSM30S Turning indexable insert — Tiger·tec Silver for stainless steels and superalloys | Walter Tools A SCMT09T304-FM6 WSM30S is a square 90° turning insert with FM6 chipbreaker designed for heavy‑duty machining of stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated carbide Stable edge for stainless steel machining FM6 chipbreaker for controlled chips Square 90° insert with 0.4 mm corner radius High‑performance coating for extended tool life The combination of the Tiger·tec Silver technology and a coated carbide substrate delivers thermal resilience and wear resistance where it matters most. Designed for machining stainless steels (ISO group M) and heat‑resistant alloys (ISO group S), the grade supports stable chip formation under high temperatures and tough cutting conditions. This results in fewer interruptions, longer intervals between indexings and a predictable tool life that benefits throughput and production planning. Geometry and chip control for reliable surface quality The insert’s FM6 chipbreaker and 0.4 mm corner radius are optimised for controlled chip formation and consistent cutting forces, improving repeatability across batches. A 7° relief angle helps reduce rubbing and heat build‑up while the square 90° form offers straightforward toolholder compatibility for conventional turning operations. These geometric choices translate into reliable surface finish and fewer reworks, helping maintain quality standards on serial production. Workshop integration and economic machining With tolerance class M and T3 thickness, the design balances rigidity and accessibility for a wide range of tool holders and setups. The insert’s focus on stainless and high‑temperature alloys makes it a practical choice for job shops and production environments seeking to reduce cycle times and tool consumption. The robust edge stability reduces unexpected tool change events, supporting smoother processes and lower unit machining costs. For tailored application recommendations or stock information, contact Metav Werkzeuge for technical support and rapid supply of this Walter Tools turning insert. Technical data Article number: SCMT09T304-FM6-WSM30S-WALTER Description: Turning indexable insert SCMT09T304-FM6 WSM30S, Walter Tools Facts Size: 09 Thickness: T3 Relief angle: 7° Corner radius: 0.4 mm Form: Square 90° Tolerance class: M Series: Tiger·tec Silver Grade: WSM30S Materials and features Coated carbide technology: Tiger·tec Silver Chipbreaker: FM6 Suitable for: Stainless steels (M) and heat‑resistant superalloys / titanium (S) Application: Heavy‑duty machining and demanding materials Designation: SCMT09T304-FM6 WSM30S FAQ Is this insert suitable for machining stainless steels? Yes. The SCMT09T304-FM6 WSM30S is specifically formulated for stainless steels (ISO group M) and offers stabilised chip formation and edge life in these materials. What does the FM6 chipbreaker achieve? The FM6 chipbreaker on this Walter Tools insert promotes controlled chips and stable cutting forces, improving surface quality and reducing the risk of built‑up edge. Can this grade handle heat‑resistant alloys and titanium? Yes. The WSM30S grade is intended for challenging materials, including heat‑resistant superalloys and titanium (ISO group S), where thermal and mechanical stress on the cutting edge are high. Which geometric details affect setup choices? Key setup factors are the square 90° form, 0.4 mm corner radius, 7° relief angle and T3 thickness, which determine holder compatibility and cutting conditions for consistent performance. How does the Tiger·tec Silver series benefit production? Tiger·tec Silver coated carbide provides improved wear resistance and thermal stability, which extends edge life and contributes to predictable tool behaviour across longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for clarification only and do not imply any association between our company and the named manufacturers. The offered item is original and brand new.
SCMT09T304-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of reliable finishing performance and consistent chip control offered by this cermet-grade insert. Combining precision geometry with Walter Tools manufacturing yields repeatable surface quality and reduced tooling costs; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SCMT09T304-FP4 WEP10C Walter Tools – Cermet Insert for Turning, FP4 Chipbreaker, 7° Relief The SCMT09T304-FP4 WEP10C is a square 90° indexable insert intended for precision turning tasks where fine surface finish and stable cutting are required Walter Cermet WEP10C for fine finishing FP4 chipbreaker for stable chip control 7° relief angle reduces rubbing Square 90° form with 0.4 mm corner radius High-precision finishing with economical running costs The cermet composition of this grade is designed to deliver a superior surface texture while maintaining dimensional repeatability. The WEP10C grade offers a controlled wear behaviour that supports long, predictable tool life and minimises rework. The insert geometry, including the square 90° form and 0.4 mm corner radius, helps achieve stable cutting conditions in finishing operations. For process planners, the combination of controlled flank contact and consistent edge retention translates into reduced downtime and a more efficient production flow. Improved chip control and process stability Built around the FP4 chipbreaker, the insert channels chips reliably away from the cutting zone, reducing the risk of entanglement and tool interruption. The modest 7° relief angle reduces rubbing against the workpiece, which lowers cutting forces and heat generation during light finishing cuts. These features contribute to reproducible results across serial production. For less experienced technicians, the chip management and geometry reduce the need for frequent parameter adjustments and support a steadier cycle time. Clear handling and application guidance for planners and operators The insert is supplied in T3 thickness and tolerance class M, suitable for precision turning setups requiring standard clamping and indexable insert holders. The designation SCMT09T304-FP4 WEP10C indicates the insert shape and chipbreaker family; check the manufacturer's product matrix to confirm suitability for specific workpiece materials and machining parameters. While the cermet grade favours fine finishing, machining data should be validated on representative samples to ensure optimal feed and cutting speed selection. For further specification details, technical teams can consult Metav Werkzeuge for tailored recommendations. Reliable brand performance and consistent results Walter Tools' Cermet series is engineered for consistent edge integrity and predictable wear patterns in finishing contexts. The series aims to combine productivity with high-quality surface outcomes, offering a stable cutting edge that supports repeatable processes. Where process security and surface quality are priorities, the insert's targeted geometry and material treatment help maintain consistent part-to-part quality and reduce scrap rates over long production runs. Contact Metav Werkzeuge for tailored application advice on Walter Tools cermet inserts and to confirm the correct insert grade and clamping for specific turning operations Technical Data Article number: SCMT09T304-FP4-WEP10C-WALTER Designation: SCMT09T304-FP4 WEP10C SKU: SCMT09T304-FP4-WEP10C-WALTER Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Grade: WEP10C (cermet) Chipbreaker: FP4 Form: Square 90° Series: Walter Cermet Material information: Catalogue dependent FAQ What materials is this insert suitable for? The SCMT09T304-FP4 WEP10C from Walter Tools is a cermet-grade insert; suitability for specific materials should be checked against the manufacturer's product matrix and validated in application testing. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes stable chip formation and evacuation, improving process reliability and surface finish when using the SCMT09T304-FP4 WEP10C in finishing operations. What does the T3 designation mean for clamping? T3 indicates the nominal insert thickness; ensure the matching toolholder is specified for T3 inserts to maintain correct clamping and cutting clearance for the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product from Walter Tools; descriptions and brand references are provided solely for explanation and correct identification.
SCMT09T304-FP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WPP10G carbide grade and the FP4 chipbreaker for consistent, productive steel turning; order the SCMT09T304-FP4 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T304-FP4 WPP10G – Square 90° turning insert with Tiger‑tec Gold coating by Walter Tools The SCMT09T304-FP4 WPP10G is a square indexable insert designed for turning steel, combining a robust coated-carbide grade with a reliable chipbreaker and precision geometry for stable, repeatable machining. Tiger‑tec Gold coating for extended tool life Grade WPP10G optimised for steel machining FP4 chipbreaker for controlled chip formation Square 90° geometry with 0.4 mm corner radius Increased process reliability through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP10G grade delivers a durable cutting edge that reduces flank wear and preserves edge stability under typical steel turning conditions. The coated carbide construction is engineered to withstand the temperatures and forces associated with ISO P materials, giving a clear benefit in terms of tool life and fewer indexings per part. This results in more predictable cycle times and lower tooling consumption, which supports cost-efficient production. Consistent chip control and surface quality from the FP4 breaker The FP4 chipbreaker has been developed to produce consistent chip forms in common steel grades, reducing interruptions from tangling or clogging during continuous turning. Reliable chip evacuation contributes to a steady surface finish and minimises the risk of built-up edge formation. When paired with the insert’s geometry, the chipbreaker helps maintain machining stability, particularly on medium to long turning cycles where consistent swarf behaviour is essential. Geometry and tolerances that support precise turning The insert’s square 90° shape and 0.4 mm corner radius provide a balanced compromise between strength and finishing capability, while the 7° clearance angle helps to control cutting forces and contact conditions. The tolerance class M ensures dimensional consistency across production batches, offering easier toolpath verification and predictable part tolerances. These geometric attributes make the insert suitable for a wide range of turning tasks where repeatability and process security are required. Practical selection and application guidance for machining steel As a grade formulated for the ISO P group, WPP10G is targeted at steel applications where a mixture of wear resistance and toughness is needed. The insert thickness T3 and the SCMT09T304-FP4 designation indicate compatibility with toolholders accepting SCMT-style square inserts, enabling straightforward integration into existing tool setups. For best results, match cutting parameters to the chosen steel grade and consider the FP4 chipbreaker’s behaviour when setting feeds to promote short, controllable chips. Contact Metav Werkzeuge for tailored product matching, delivery options and advice on integrating Walter Tools SCMT09T304-FP4 WPP10G inserts into production Technical Data Article number: SCMT09T304-FP4-WPP10G-WALTER Designation: SCMT09T304-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coated carbide Chipbreaker: FP4 Material application: Steel (ISO P) Execution: T FAQ What materials is this insert intended for? The SCMT09T304-FP4 WPP10G is designed for ISO P materials, primarily steel, and the WPP10G grade optimises wear resistance and toughness for typical steel turning tasks. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the SCMT09T304-FP4 WPP10G promotes predictable chip formation and evacuation, which supports stable surface quality and reduces the likelihood of chip-related interruptions. What are the key geometric specifications of the insert? This square insert features a 90° form with a 0.4 mm corner radius and a 7° clearance angle, providing a balance between edge strength and finishing capability. Is the insert coated and what are the benefits? Yes; the insert uses the Tiger‑tec Gold coating technology, which enhances thermal and abrasive wear resistance and helps maintain a stable cutting edge in steel machining. Which toolholders accept this insert format? The SCMT09T304-FP4 WPP10G fits holders designed for SCMT09-style square inserts; compatibility should be confirmed against the toolholder’s clamping and seat geometry. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-FP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold durability, precise FP4 chip control and the compact 0.4 mm corner radius for consistent turning results; order the insert directly via Metav Werkzeuge or request technical advice for optimal process integration. SCMT09T304-FP4 WPP20G indexable insert — Tiger‑tec Gold coating, for Stahl turning SCMT09T304-FP4 WPP20G is a square, 90° turning insert designed for general Stahl applications and stable chip formation Tiger‑tec Gold coated grade WPP20G Chipbreaker type FP4 for reliable chip control Square 90° shape with 0.4 mm corner radius 7° clearance angle for reduced rubbing Consistent productivity through optimised grade and coating The graded WPP20G insert combines a Tiger‑tec Gold coating with a wear‑resistant carbide substrate to deliver predictable life when machining Stahl. The coating reduces flank wear and helps maintain cutting-edge integrity, which in turn reduces process variation and part rework. For manufacturing operations where repeatability matters, this grade supports longer cycles between tool changes and contributes to steady cycle times. The compact corner geometry also enables dependable finishing without sacrificing durability. Improved chip control and surface quality from FP4 geometry The FP4 chipbreaker in this insert is tuned for common turning feeds in Stahl, promoting short, uniform chips and lowering the risk of built-up edge. Short, controlled chips protect the workpiece surface and the machine spindle, while the square 90° configuration allows secure clamping and radial stability. By converting geometric features into practical benefits—less manual chip clearing, fewer interruptions and a consistent surface finish—the insert supports higher uptime and reduced manual intervention. Precision geometry for dimensional accuracy and flexibility A 0.4 mm corner radius with a 7° clearance angle balances strength and finish capability: the radius gives edge robustness for general turning tasks, while the clearance limits flank contact that can cause heat buildup. The SCMT09T304-FP4 format is suitable for facing and light to medium turning operations on Stahl, offering a flexible option for batch production and jobbing work alike. The standardised square shape simplifies toolholder selection and indexation routines, supporting fast, repeatable insert changes. Contact Metav Werkzeuge for tailored recommendations on integrating Walter Tools' Tiger‑tec Gold inserts into production—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SCMT09T304-FP4-WPP20G-WALTER Article designation: SCMT09T304-FP4 WPP20G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade/series: WPP20G, Tiger‑tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: FP4 Coating/grade: Tiger‑tec Gold (WPP20G) Base material: coated carbide Application: Stahl Execution: T Series description: High wear resistance and universal performance FAQ What materials is this insert suitable for? The SCMT09T304-FP4 WPP20G insert is specified for machining Stahl, with the WPP20G grade optimised for typical heat and chip conditions encountered in steel turning. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes short, controlled chips and consistent evacuation during turning, which improves surface quality and reduces manual chip handling. What are the geometric highlights of this insert? This square 90° insert features a 0.4 mm corner radius and a 7° clearance angle, offering a balance of edge strength and good finishing capability for general turning. Can this insert be used for roughing and finishing? The combination of the WPP20G coating and a modest corner radius makes the insert versatile for light to medium roughing and finishing operations on Stahl, depending on cutting parameters. What is the exact designation to order? Order using the full designation SCMT09T304-FP4 WPP20G (Walter Tools) to ensure the correct grade, chipbreaker and geometry are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-FP6 WPP20G Wendeplatten - Walter Tools
Take advantage of precise, repeatable tool life and broad steel capability to boost turning productivity; the combination of the Tiger·tec Gold grade and the FP6 chipbreaker ensures stable chip control and efficient material removal. Order the SCMT09T304-FP6 WPP20G turning insert directly via Metav Werkzeuge or contact our consultants for tailored application advice. SCMT09T304-FP6 WPP20G square 90° turning insert, optimised for steel machining — Walter Tools The SCMT09T304-FP6 WPP20G is a square 90° indexable turning insert designed for general-purpose turning of steel, offering a balanced mix of wear resistance and toughness thanks to the Tiger·tec Gold coating technology. Tiger·tec Gold coated grade WPP20G FP6 chipbreaker for controlled chips Square 90° form with 0.4 mm corner radius 7° relief angle for versatile cutting Faster, more consistent production through optimised grade choice The combination of the Tiger·tec Gold coating and the WPP20G grade provides a reliable balance between wear resistance and toughness, which contributes to consistent tool life across batches. For operations involving unalloyed and alloyed steel (ISO group P), this coating reduces flank wear and maintains a stable cutting edge, helping to keep cycle times predictable. The FP6 chipbreaker is engineered to produce manageable chips under typical turning parameters, lowering the risk of machine interruptions and improving throughput. Practical geometry that improves process security A square 90° shape with a 0.4 mm corner radius and a 7° relief angle gives a robust edge for a wide range of turning tasks, from light finishing to medium roughing. The compact plate size (09) and T3 thickness support secure clamping and repeatable positioning in standard toolholders. These geometric choices mean fewer indexing events and reduced setup interventions, translating into lower overall labour per part and improved process security on the shop floor. Clear advantages for workshop planning and tool management Standardised tolerance class M and the ISO designation ensure easy identification and compatibility with existing tool systems, simplifying inventory control. The insert’s composition and design suit mixed production environments where steel is the main material, enabling fewer tool types to cover diverse component families. Predictable wear behaviour also supports more accurate tooling cost calculations and scheduling, helping to justify the grade selection on economic grounds. Application guidance and performance expectations The carbides and coating technology integrated in this insert favour stable chip formation and consistent surface quality in turning operations of steel. For best results, pair the insert with toolholders that support square inserts and follow manufacturer-recommended cutting data for the workpiece grade. Where medium to high durability is required, the WPP20G grade will deliver a balance of durability and toughness, making it suitable for production runs that demand both finish and repeatability. For detailed application recommendations or to source SCMT09T304-FP6 WPP20G inserts in larger quantities, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable cutting data and delivery options. Technical data Article number: SCMT09T304-FP6-WPP20G-WALTER Designation: SCMT09T304-FP6 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Relief angle: 7° Corner radius: 0.4 mm Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold coated carbide) Chipbreaker: FP6 Execution: T Material application: Steel (ISO group P) FAQ What materials is this insert intended for? The SCMT09T304-FP6 WPP20G is specified for machining steel (ISO group P) and is optimised for the heat and chip formation typical of turning steel. How does the FP6 chipbreaker affect machining? The FP6 chipbreaker on the insert promotes controlled chip formation during turning operations, improving evacuation and reducing the chance of entanglement with workpieces or fixtures. Is this insert compatible with standard square insert toolholders? Yes, the square 90° form and the designation SCMT09T304-FP6 align with standard toolholders designed for square indexable inserts. What does the WPP20G grade deliver in production? WPP20G as part of the Tiger·tec Gold family provides a balance of wear resistance and toughness, delivering repeatable tool life and good surface quality in steel turning. Can this insert be used for finishing as well as roughing? The geometry and grade are suitable for both finishing and medium roughing on steel; select cutting parameters according to the desired surface finish and material removal rate. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. They are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered article is original, brand-new goods supplied by the manufacturer.
SCMT09T304-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver grade, an MK4 chipbreaker and a 0.4 mm corner radius to achieve predictable, productive results when machining cast iron; order the SCMT09T304-MK4 WKK10S directly via Metav Werkzeuge or consult our technical team for process recommendations. SCMT09T304-MK4 WKK10S — Square 90° turning insert, Tiger‑tec Silver grade, for cast iron (Walter Tools) SCMT09T304-MK4 WKK10S is a square 90° indexable turning insert designed for productive machining of cast iron components, featuring an MK4 chipbreaker and a coated carbide grade optimised for abrasive grey and nodular cast irons. Tiger‑tec Silver coated carbide grade WKK10S Optimised for cast iron (ISO group K) MK4 chipbreaker for consistent chip control Square 90° geometry with 0.4 mm corner radius Durable grade for abrasive cast iron machining The insert uses the Tiger‑tec Silver programme and the WKK10S grade, a coated carbide designed specifically for the demands of cast iron workpieces. This combination increases wear resistance under the abrasive conditions typical of cast materials and improves tool life in series production. Coating technology reduces flank wear and supports repeatable component quality, while the grade formulation is balanced to handle short, brittle chips that commonly form when turning cast iron. The result is a robust cutting edge that maintains performance over longer tool cycles, raising productivity in batch and continuous operations. Predictable chip control and reduced rework Equipped with the MK4 chipbreaker, the insert promotes stable chip formation and controlled evacuation during turning. A well-matched chipbreaker reduces the risk of long, entangling swarf, protects the workpiece surface and helps avoid interruptions at the machine. The chip control geometry is particularly effective when combined with the insert’s grade for cast iron, delivering consistent swarf behaviour and fewer secondary operations. For manufacturing environments where uptime and surface integrity are priorities, this insert supports reliable process results and lower scrap rates. Geometry that balances strength and versatility The square 90° shape with a 0.4 mm corner radius and 7° clearance provides a compromise between rigidity and finish capability: the larger corner angle increases edge strength for interrupted cuts and heavier depth of cut, while the moderate radius supports acceptable surface quality without sacrificing durability. The T3 thickness and insert format 09 give predictable seating in standard toolholders and stable clamping. This geometry is suitable for medium to roughing cuts in cast iron components and can also be adapted for semi‑finishing where a balance of productivity and dimensional control is required. Practical application advice for process reliability As an indexable solution, the insert integrates into common turning toolholders without special setup and is suited to batch and continuous production of cast iron parts. The WKK10S grade prioritises process security in abrasive materials, making it appropriate for finishing and higher‑productivity roughing operations where stable cutting forces and repeatable tool life are needed. When selecting cutting parameters, focus on steady feed and adequate coolant or air blast to assist chip evacuation; the combination of Tiger‑tec Silver coating and MK4 geometry will help maintain a consistent surface finish and long edge life in typical cast iron machining scenarios. For tailored application support or to request SCMT09T304-MK4 WKK10S inserts from Walter Tools, contact Metav Werkzeuge for technical advice and order coordination Technical data Article number: SCMT09T304-MK4-WKK10S-WALTER SKU: SCMT09T304-MK4-WKK10S-WALTER Designation: SCMT09T304-MK4 WKK10S Facts Insert shape: Square 90° Corner radius: 0.4 mm Clearance (relief) angle: 7° Thickness: T3 Insert size: 09 Chipbreaker: MK4 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK10S (coated carbide) Application: Cast iron (ISO group K) Suitable for short, broken chips typical of cast materials Manufacturer: Walter Tools FAQ What materials is this insert designed for? The SCMT09T304-MK4 WKK10S is formulated for machining cast iron (ISO group K); the WKK10S grade and coating are adapted to abrasive cast materials. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of long swarf and improving surface integrity when turning cast iron with this turning insert. Can the insert be used for interrupted cuts? Yes, the square 90° geometry and a 0.4 mm corner radius provide robustness that is advantageous for interrupted cuts and heavier engagement in cast iron applications. Is this insert compatible with standard toolholders? The SCMT09T304-MK4 format fits conventional indexable turning toolholders designed for square 90° inserts; correct seating and secure clamping are recommended for repeatable performance. How does the Tiger‑tec Silver series improve process reliability? The Tiger‑tec Silver coating improves wear resistance and edge protection in abrasive materials, delivering more consistent tool life and fewer interruptions in cast iron turning. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only; there is no connection between our company and the referenced brands. The offered item is an original, factory‑new product of the manufacturer.
SCMT09T304-MK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK20S grade for abrasive cast-iron machining; the square 90° geometry with a 0.4 mm corner radius delivers reliable cutting performance and easy indexability. Order the SCMT09T304-MK4 WKK20S directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T304-MK4 WKK20S square 90° indexable insert — Walter Tools (Tiger·tec Silver, for cast iron) SCMT09T304-MK4 WKK20S is an indexable cutting insert designed for machining cast iron; it combines a wear-resistant coating with a robust geometry for secure chip control. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining Square 90° geometry for robust indexability 0.4 mm corner radius for stable cutting Consistent tool life through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKK20S carbide grade is engineered for cast iron applications, where abrasive wear and short, breaking chips are common. The coated cemented carbide resists abrasive attack and maintains edge integrity over longer tool cycles, which reduces downtime for tool changes and supports predictable production planning. For shops seeking stable performance in repetitive machining tasks, this insert offers a measured balance between wear resistance and toughness, improving process reliability during finishing and medium-depth turning or boring operations. Geometry that supports rigidity and predictable chips A square 90° plate form with a 7° relief angle and a 0.4 mm corner radius provides a sturdy cutting edge with good shock resistance. The MK4 chipbreaker is tailored to produce short, controlled chips in brittle materials, lowering the risk of entanglement and enhancing surface quality. The plate thickness T3 contributes to torsional stiffness in the toolholder, which helps maintain dimensional accuracy and repeatable results when indexing the insert. These geometrical choices translate into fewer interruptions for regripping or part rework and make the insert a practical choice where repeatability matters. Practical guidance for application and process stability Classified with tolerance grade M, the insert meets medium precision requirements relevant to many workshop and production environments. Its design suits both drilling/boring and turning indexable applications where cast iron is the principal workpiece material. In practice, pairing the insert with a suitably rigid toolholder and an appropriate coolant strategy will support stable chip formation and extend tool life. The insert’s specifications—such as the square geometry, chipbreaker type and corner radius—should be matched to the workpiece grade and the intended cutting parameters to achieve the best balance between productivity and component finish. For reliable cast-iron machining with Walter Tools’ Tiger·tec Silver grade WKK20S, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical advice. Technical data Article number: SCMT09T304-MK4-WKK20S-WALTER Product designation: SCMT09T304-MK4 WKK20S Manufacturer: Walter Tools Product type: Indexable insert (drilling/boring and turning) Facts Grade/Sort: WKK20S Coating series: Tiger·tec Silver Relief angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Chipbreaker: MK4 Plate thickness: T3 Tolerance class: M Special features Suitable for: Cast iron (K) Coated cemented carbide Optimised for short, breaking chips Robust geometry for indexability FAQ Is this insert suitable for machining cast iron? Yes. The SCMT09T304-MK4 WKK20S is specifically formulated for cast iron machining; the WKK20S grade and Tiger·tec Silver coating are tuned to resist abrasive wear and to produce short chips in grey and nodular cast irons. What does the Tiger·tec Silver finish provide? The Tiger·tec Silver coating increases surface hardness and wear resistance compared with uncoated grades, which helps the insert maintain cutting edge integrity in abrasive cast-iron conditions. What are the key geometry features to consider? The square 90° plate form, 7° relief angle and 0.4 mm corner radius give a stable cutting edge and improved shock resistance; the MK4 chipbreaker promotes controlled, short chip formation for safer chip disposal. Can this insert be used for stainless steel or general steel? The SCMT09T304-MK4 WKK20S is optimised for cast iron; no specification for stainless steel or general steel machining is provided for this grade, so selection should follow the manufacturer’s material recommendations. What does tolerance class M indicate? Tolerance class M denotes a medium dimensional tolerance suitable for standard production tasks where balanced accuracy and economy are required; it supports stable seating and repeatable indexing in suitable toolholders. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
SCMT09T304-MM4 WMP20G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, secure chip control and consistent edge stability to maintain productive stainless‑steel turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. SCMT09T304‑MM4 WMP20G — Square Turning Insert (Tiger·tec Gold) for Stainless Steel, Walter Tools The SCMT09T304‑MM4 WMP20G is a square indexable turning insert engineered for medium to robust machining of stainless steel, offering coated‑carbide durability and stable chip formation in demanding conditions. Tiger·tec Gold coating for stainless steel performance 7° clearance angle for secure chip control 0.4 mm corner radius for reliable edge strength Square 90° form for versatile turning and boring Consistent cutting performance for stainless‑steel workpieces The Tiger·tec Gold‑based grade WMP20G is formulated to address the specific challenges of machining stainless steel — toughness, built‑up edge tendency and high heat generation. As a coated carbide solution, the insert supports controlled cutting temperatures and predictable wear behaviour; this translates into longer tool life and fewer unplanned tool changes in serial production. The MM4 chipbreaker contributes to stable chip control, reducing the risk of entanglement and improving surface integrity on finished components. Geometry and edge design that secure process reliability A square 90° plate shape together with a 0.4 mm corner radius balances edge strength and versatility for plunge cuts, general turning and light boring operations. The specified 7° clearance angle helps to avoid rubbing and reduces cutting forces where material stickiness is a concern. The T‑thickness construction (T3) provides mechanical support for the cutting edge under moderate to heavy cut conditions, while the MM4 groove geometry is tuned to promote predictable chip formation when machining austenitic and other stainless grades. Production advantages for workshops and toolrooms As an indexable insert, the SCMT09T304‑MM4 format allows rapid replacement and multiple usable edges, supporting high uptime and efficient tool‑room logistics. The combination of the WMP20G grade and Tiger·tec Gold coating yields a favourable trade‑off between wear resistance and toughness, making it suitable for series production where reproducible surface finish and dimensional stability are required. Compatibility with common ISO‑style toolholders and the standard SCMT geometry ensures straightforward integration into existing tool assemblies and quick changeover in multi‑station setups. Specify the WMP20G grade for demanding stainless‑steel turning and contact Metav Werkzeuge for tailored tool selection and ordering assistance Technical data SKU: SCMT09T304‑MM4‑WMP20G‑WALTER Designation: SCMT09T304‑MM4 WMP20G Product type: Turning / boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Facts Corner radius: 0.4 mm Clearance angle: 7° Insert size: 09 Plate form: Square 90° Plate thickness: T3 Chipbreaker: MM4 Tolerance class: M Special features Coated carbide grade Tiger·tec Gold Optimised for stainless steel machining Stable chip formation and edge control Suitable for medium to robust cutting conditions Indexable insert with multiple cutting edges FAQ What stainless‑steel applications suit this insert? The SCMT09T304‑MM4 WMP20G is designed for medium to robust turning of stainless steel grades where toughness and heat build‑up require a coated‑carbide solution for stable cutting and repeatable surface quality. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this insert promotes controlled chip formation and evacuation during turning of stainless steel, helping to reduce built‑up edge and improve process stability with the WMP20G grade. Is the SCMT09T304‑MM4 compatible with standard toolholders? Yes; the SCMT geometry follows ISO indexable insert standards and is compatible with holders designed for SCMT‑type square inserts, enabling straightforward retrofitting into existing tool assemblies. What are the main advantages of the Tiger·tec Gold grade? Tiger·tec Gold provides enhanced wear resistance combined with sufficient toughness, delivering consistent cutting edge performance and improved tool life when machining demanding materials such as stainless steel. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names are used for description only and indicate original factory‑new products of the stated manufacturer.
SCMT09T304-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Silver coating and the WMP20S grade for dependable machining of stainless steel; the MM4 chipbreaker and 0.4 mm corner radius deliver stable chip control and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Drilling/Boring and Turning Indexable Insert SCMT09T304-MM4 WMP20S – for stainless steel, Walter Tools SCMT09T304-MM4 WMP20S is a square 90° indexable insert engineered for demanding boring and turning tasks in stainless steel, offering a balanced geometry and a robust coating technology for secure chip formation. Tiger·tec Silver coating for improved wear resistance Specifically graded WMP20S for stainless steel MM4 chipbreaker for stable chip control Square 90° geometry with 0.4 mm corner radius Reliable performance on stainless steel for predictable results The insert’s core advantage is its WMP20S carbide grade combined with Tiger·tec Silver technology, designed to cope with the toughness and heat sensitivity of stainless steel. This pairing promotes stable cutting edges and reduced adhesion at the rake face, which in practice improves tool life and lowers the frequency of insert changes. The specification supports medium to robust cutting conditions, translating into fewer unexpected stoppages and a more predictable production flow. Geometry and chip control that protect the workpiece and tool A square 90° format with a 0.4 mm corner radius and a 7° clearance angle provides a firm platform for radial cuts and bore enlargements while helping to distribute cutting forces evenly. The MM4 chipbreaker is tuned for continuous, controllable chip formation in stainless steel, reducing the risk of built-up edge and improving surface finish. For operations where component integrity and repeatability matter, this geometry reduces the need for manual rework and supports tighter tolerances. Process security that improves efficiency and reduces costs Using a coated insert from a recognised tool family such as Tiger·tec Silver promotes consistent performance across batches and operators. The robust coating and the WMP20S grade maintain a sharp edge for longer, cutting down on downtime for insert index changes. This reliability, combined with proven chip control, enhances machining throughput and often leads to lower overall production costs per component, particularly in high-mix or long-run stainless steel applications. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts or to request a machining recommendation and delivery details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SCMT09T304-MM4-WMP20S-WALTER Designation: SCMT09T304-MM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert form: Square 90° Size designation: 09 Thickness: T3 Materials & features Grade: WMP20S (coated carbide) Chipbreaker: MM4 Intended application: stainless steel Execution: T FAQ What materials is this insert suitable for? The SCMT09T304-MM4 WMP20S insert from Walter Tools is intended primarily for stainless steel and is optimised for the typical challenges of those alloys. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the SCMT09T304-MM4 WMP20S improves wear resistance and helps maintain cutting-edge stability, which supports longer tool life and consistent component quality. Which chipbreaker is fitted and what is its effect? The insert features the MM4 chipbreaker, which promotes controlled chip formation in stainless steel and reduces the risk of built-up edge and surface defects. Is the geometry suitable for both boring and turning operations? Yes; the square 90° form and 0.4 mm corner radius of the SCMT09T304-MM4 WMP20S provide a stable cutting platform suitable for both boring and turning tasks under medium to robust conditions. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-MM4 WSM10S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust MM4 chip control and precise 0.4 mm corner radius for reliable performance in demanding turning and boring operations. Order the SCMT09T304-MM4 WSM10S directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T304-MM4 WSM10S — Square turning/boring insert, Tiger·tec Silver, Walter Tools SCMT09T304-MM4 WSM10S is a square 90° indexable insert engineered for tough turning and boring tasks in rostfreier Stahl and heat-resistant superalloys. Tiger·tec Silver coating 7° clearance angle 0.4 mm corner radius MM4 chipbreaker for stable chips High-performance cutting for difficult-to-machine alloys The SCMT09T304-MM4 WSM10S combines a coated cemented carbide substrate with the Tiger·tec Silver coating to provide increased wear resistance and thermal stability. This results in longer tool life and consistent component quality when machining rostfreier Stahl and superalloys (ISO groups M and S). The MM4 chipbreaker is designed to form controllable chips under interrupted cuts and tougher materials, reducing the risk of built-up edge and improving process reliability. Technical advantages such as a 7° clearance angle and a 0.4 mm corner radius contribute to a balance between edge strength and surface finish, enabling productive machining without sacrificing stability. Precision geometry that supports productivity and surface quality The square 90° insert shape and the insert size designation support versatile toolholder setups for turning and boring applications. The 0.4 mm nose radius provides enough robustness for shoulder work and light profiling while still permitting acceptable surface finishes in many finishing passes. Because the grade WSM10S is a coated carbide engineered for thermal resistance, it maintains a stable cutting edge at elevated cutting temperatures typical of rostfreier Stahl and titanium alloys. For production environments seeking predictable cycle times, this combination reduces the need for frequent tool changes and supports consistent output. Practical handling and application guidance The insert is supplied in the SCMT09T304-MM4 geometry with thickness T3 and the MM4 chip control, so it is suited to a range of turning and boring toolholders that accept square inserts. When selecting cutting parameters, prioritise moderate feeds and appropriate coolant strategies for rostfreier Stahl to avoid excessive heat build-up; the Tiger·tec Silver coating assists with heat management and edge integrity. For advice on optimal cutting speeds and feeds for specific alloys or machine setups, Metav Werkzeuge provides technical consultation and application support to match the insert to the task. Contact Metav Werkzeuge for tailored application advice on the Walter Tools SCMT09T304-MM4 WSM10S insert and for stock availability and delivery options Technical Data SKU: SCMT09T304-MM4-WSM10S-WALTER Article designation: SCMT09T304-MM4 WSM10S Base designation: SCMT09T304-MM4 Manufacturer: Walter Tools Product type: Turning/boring indexable insert Facts Clearance angle: 7° Corner radius: 0.4 mm Insert form: Square 90° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM10S (coated cemented carbide) Chipbreaker: MM4 Material groups: M (rostfreier Stahl), S (superalloys / titanium) Series: Tiger·tec Silver FAQ What materials is this insert suitable for? The SCMT09T304-MM4 WSM10S is designed for rostfreier Stahl (ISO group M) and heat-resistant superalloys and titanium (ISO group S), benefiting from the Tiger·tec Silver coating for thermal resistance. Which chipbreaker is fitted and what is its advantage? This insert features the MM4 chipbreaker, which promotes stable chip formation and reduces the likelihood of built-up edge under interrupted or heavy cutting conditions. What is the nose radius and how does it affect surface finish? The insert has a 0.4 mm corner radius; this provides a compromise between edge strength and achievable surface finish, suitable for many finishing and semi-finishing passes. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating improves thermal stability and wear resistance, extending tool life and supporting consistent component quality in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com