SCMT09T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver grade and the MM4 chipbreaker for reliable chip control and extended tool life when machining stainless steels and heat‑resistant alloys; combine durability, consistent surface quality and simple indexable‑insert handling for efficient production. Order or request application advice via Metav Werkzeuge for fast procurement and tailored cutting parameters. SCMT09T304-MM4 WSM20S — Square 90° indexable insert, Tiger·tec Silver, Walter Tools The SCMT09T304-MM4 WSM20S is an indexable turning and boring insert designed for heavy machining of stainless steels and heat‑resistant superalloys, offering a robust square 90° form with a 0.4 mm corner radius. Tiger·tec Silver coated carbide technology Optimised for stainless steels and superalloys Square 90° insert with 0.4 mm corner radius MM4 chipbreaker for stable chip control Reliable performance for difficult-to-cut materials The Tiger·tec Silver coating combined with the WSM20S grade provides enhanced wear resistance and temperature stability, which translates into longer tool life and fewer indexings during production cycles. Coated carbide chemistry and a coating architecture tuned to heavy machining improve chip formation and reduce adhesion tendencies typical of stainless steels and nickel‑based alloys. The practical effect is more consistent cycle times and lower tool consumption, supporting cost‑efficient machining without sacrificing component quality. Stable geometry for consistent surface finish A square 90° shape with a 0.4 mm corner radius delivers rigidity at the cutting edge and helps maintain dimensional stability on facing and profiling operations. This geometry reduces deflection under load and contributes to a predictable surface finish even when machining materials that tend to work‑harden. The tolerance class M ensures repeatable insert seating and interchangeability, which benefits shops aiming for reproducible part quality across multiple tool changes. Efficient machining through controlled chips and clearance The integrated MM4 chipbreaker is built for secure chip control in long, continuous cuts and semi‑finishing passes. Combined with a 7° clearance angle, the insert reduces rubbing and heat build‑up at the flank, improving cutting efficiency and extending edge life. The insert thickness T3 and size 09 are standard dimensions that enable straightforward integration into common indexable toolholders, keeping changeovers quick and maintenance effort low — a practical advantage for production environments. Application scenarios and handling recommendations This insert is particularly suited to turning and boring operations in demanding materials groups S and M (heat‑resistant alloys and stainless steels). Use the grade where thermal stability and edge robustness are priorities; adjust feeds and speeds conservatively during initial trials to confirm chip behaviour. The insert’s features favour heavy cuts followed by a finishing pass with modest feed rates to achieve the required surface quality while preserving edge integrity. For further application guidance or to verify compatibility with specific holders, Metav Werkzeuge can provide technical parameters and recommendations. Contact Metav Werkzeuge today for tailored cutting data, compatibility checks and to source Walter Tools SCMT09T304-MM4 WSM20S inserts for robust stainless and superalloy machining Technical data Article number: SCMT09T304-MM4-WSM20S-WALTER Type: Indexable turning/boring insert Series: Tiger·tec Silver Grade: WSM20S Facts Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Square 90° Insert size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: MM4 Material suitability: S / M (heat‑resistant superalloys, stainless steels) Coating: Tiger·tec Silver coated carbide Typical application: Heavy machining and challenging materials FAQ Which materials are best suited for this insert? The SCMT09T304-MM4 WSM20S insert and the WSM20S grade are optimised for group M (stainless steels) and group S (heat‑resistant superalloys and titanium), where edge stability and thermal resistance are required. What benefits does the Tiger·tec Silver series provide? Tiger·tec Silver coating enhances wear resistance and heat tolerance, enabling the insert to maintain a stable cutting edge and deliver more consistent results in demanding machining conditions. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes controlled chip formation and evacuation in continuous and semi‑continuous cuts, reducing the risk of built‑up edge and improving process reliability with the SCMT09T304-MM4 WSM20S insert. Is this insert compatible with standard toolholders? The insert follows common indexable dimensions (size 09, T3 thickness, square 90°) and is compatible with toolholders designed for SCMT‑type inserts; verify holder specifications for seat and clamping compatibility before use. What machining strategy is recommended for initial trials? Begin with conservative speeds and moderate feeds to observe chip behaviour and temperature; the WSM20S grade is designed for thermal stability, but setting appropriate parameters will extend tool life and ensure desired surface quality. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanation; no affiliation exists between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
SCMT09T304-MP4 WPP20G Wendeplatten - Walter Tools
Take advantage of a high-performance cutting grade and a controlled-chip geometry to keep cycle times stable and reduce unplanned tool changes; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. SCMT09T304-MP4 WPP20G square turning/drilling insert by Walter Tools — Tiger·tec Gold, MP4 chipbreaker, 7° clearance SCMT09T304-MP4 WPP20G is a square indexable insert designed for turning and boring applications on Stahl, combining a Tiger·tec Gold coating with a robust chipbreaking geometry for reliable production performance. Tiger·tec Gold coating for extended life WPP20G grade optimised for Stahl machining MP4 chipbreaker for reliable chip control 7° clearance and 0.4 mm corner radius Extended tool life through an advanced grade The insert is produced in the Tiger·tec Gold series and uses the WPP20G grade, a coated carbide formulation that balances wear resistance and toughness for machining Stahl. This combination reduces crater and flank wear under the thermal and mechanical loads typical of steel turning, which translates into longer service intervals and fewer tool changes. The coating adheres to the substrate and reduces built-up edge; as a result, process stability is improved and surface quality is more consistent. Predictable chip control for smooth production Equipped with the MP4 chipbreaking geometry, the insert delivers controlled chip formation in a wide range of turning and boring conditions. The chipbreaker design breaks and ejects chips reliably, reducing the risk of entanglement and leaving a steady cutting load on the tool. This predictable behaviour minimises downtime caused by chip-related incidents and supports continuous operation on automated or unattended machines, while also helping to maintain a repeatable surface finish. Geometry tuned for dimensional consistency The square 90° form with 7° clearance and a 0.4 mm corner radius provides a good balance between strength and finishing capability. The T3 plate thickness and tolerance class M ensure rigid seating in the toolholder and repeatable positioning, which is essential for tight tolerances and batch-to-batch consistency. A smaller corner radius supports finer surface finish where required, while the 90° shape enables robust turning and light profiling without sacrificing stability. Practical application and productivity gains Intended as an indexable insert for both drilling/boring and turning tool families, this design supports flexible machining strategies where one carbide grade can cover a variety of operations on Stahl. By standardising on a single, universal grade like WPP20G, tool inventories are simplified and tool-change frequency is reduced, which positively impacts overall equipment effectiveness. The insert’s combination of coating and geometry is geared towards sustaining throughput while maintaining predictable tool life. Contact Metav Werkzeuge for tailored tooling advice or sample availability; Metav Werkzeuge’s technical team can recommend cutting data and holder compatibility for optimal results Technical data Article number: SCMT09T304-MP4-WPP20G-WALTER Name/Designation: SCMT09T304-MP4 WPP20G Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger·tec Gold Grade: WPP20G Designation without grade: SCMT09T304-MP4 Execution: T Tolerance class: M Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Special features Chipbreaker: MP4 Coating: Tiger·tec Gold (coated carbide) Application group: P (Stahl) according to ISO 513 Suitable for turning and drilling/boring indexable systems Optimised for stable chip formation and long tool life FAQ What materials is this insert intended for? The SCMT09T304-MP4 WPP20G insert is specified for the ISO P group and is intended for machining Stahl (unalloyed and alloyed steels). How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on this Walter Tools insert promotes short, controllable chips and consistent cutting forces, which reduces downtime and improves surface quality during turning and boring. What advantage does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, extending tool life and supporting more stable production cycles on Stahl components. Which geometrical features support accurate workpiece tolerances? The square 90° form combined with a 7° clearance and a 0.4 mm corner radius ensures rigid seating and repeatable tool engagement, aiding dimensional accuracy in serial production. Is this insert compatible with both turning and boring holders? Yes, the product type indicates suitability for both turning and drilling/boring insert systems; verify holder compatibility with the SCMT09T304-MP4 designation for correct seating and clamp fit. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
SCMT09T304-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and straightforward geometry for efficient cast-iron machining. Order the inserts directly via Metav Werkzeuge or ask the consultants for material-specific recommendations and application guidance. SCMT09T304-RK4 WKK10S – Drilling/bore and turning indexable insert, Tiger·tec Silver, Walter Tools SCMT09T304-RK4 WKK10S is a coated indexable insert developed for productive machining of cast iron in both drilling and turning operations Tiger·tec Silver coated carbide Optimised for cast iron machining RK4 chipbreaker for consistent chip control 7° clearance, 0.4 mm nose radius Engineered for productive cast-iron machining The insert uses the WKK10S grade from the Tiger·tec Silver series, a coated cemented carbide formulation tailored to the abrasive wear and frequently short, breaking chips typical of cast iron (ISO K). This composition provides a balance between wear resistance and toughness, which extends service intervals and reduces unexpected tool changes. For shops running continuous shifts, the predictable performance of this grade supports stable cycle times and lowers per-part tooling costs while maintaining reproducible results. Reliable geometry for consistent chip control and surface quality The RK4 chipbreaker and square 90° cutting form ensure controlled chip formation and evacuation in interrupted and continuous cuts. With a 7° clearance angle and a 0.4 mm corner radius, the geometry is tuned to deliver steady cutting forces and a good surface finish on grey and nodular cast irons. The modest nose radius improves edge strength while limiting radial forces, which helps to maintain dimensional accuracy and reduce vibration during both light and medium finishing passes. Dual-purpose capability for turning and bore operations This insert’s SCMT geometry represents a standard square insert form with four usable cutting edges and a stable pocket seat. The T3 thickness and size code 09 offer a compact profile suitable for many turning and small-bore drilling holders that accept SCMT-style inserts. The result is flexibility at the tool crib: one insert type can be stocked for multiple operations, simplifying inventory and enabling quick tool changes without sacrificing process reliability. Measurable benefits for workshop productivity Applying this grade and geometry yields two clear operational benefits: extended cutting life through the Tiger·tec Silver coating and reduced setup frequency thanks to consistent chip behaviour from the RK4 breaker. These technical advantages translate into higher machine uptime and more predictable component throughput. For production planners, that means fewer interruptions and a clearer understanding of tool consumption rates across cast-iron jobs. For application-specific advice on deploying the Walter Tools SCMT09T304-RK4 WKK10S insert in a machining cell or to request availability from Metav Werkzeuge, please contact Metav Werkzeuge for tailored recommendations and order support. Technical data Article number: SCMT09T304-RK4-WKK10S-WALTER Designation: SCMT09T304-RK4 WKK10S Manufacturer: Walter Tools Product type: Drilling/bore and turning indexable insert Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade: WKK10S (Tiger·tec Silver) Coating: coated cemented carbide Chipbreaker: RK4 Series: Tiger·tec Silver Application: cast iron (ISO K) FAQ What materials can this insert machine effectively? The SCMT09T304-RK4 WKK10S insert from Walter Tools is optimised for cast iron (ISO K); the WKK10S grade and Tiger·tec Silver coating address abrasive wear and promote controlled chip breaking in this material group. What does the WKK10S grade indicate? WKK10S is a Walter Tools grade within the Tiger·tec Silver coating technology; it identifies a coated cemented carbide designed for wear resistance and reliable edge life when machining cast-iron workpieces. How does the RK4 chipbreaker influence performance? The RK4 chipbreaker produces short, controllable chips and aids coolant access to the cutting zone, which improves chip evacuation and reduces the risk of entangling or long, stringy chips during interrupted cuts. Which geometric features affect surface finish and stability? Key geometry parameters are the 7° clearance angle and the 0.4 mm corner radius combined with a 90° cutting edge; these control contact conditions, limit deflection and support consistent surface quality in turning and bore operations. Is the insert suitable for both drilling and turning toolholders? The SCMT designation corresponds to a standard square insert form with four cutting edges; the SCMT09T304-RK4 geometry is intended for holders that accept SCMT-size inserts, offering versatility across compatible drilling and turning tool systems. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter AG (marketed as Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group.
SCMT09T304-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
High process reliability and long tool life result from the Tiger‑tec Silver coating and the WKK20S grade, delivering stable chip formation and effective resistance against abrasive wear. Combined with the RK4 chipbreaker and a robust square geometry, this insert supports continuous, productive machining of cast iron. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SCMT09T304-RK4 WKK20S — Indexable Turning Insert for Cast Iron, Tiger‑tec Silver — Walter Tools A compact SCMT09T304-RK4 WKK20S indexable insert engineered for productive cast iron turning, featuring the Tiger‑tec Silver coating and an RK4 chipbreaker for controlled chip shape. Tiger‑tec Silver coating for wear resistance Optimised RK4 chipbreaker for brittle chips Square 90° geometry with 0.4 mm corner radius Suitable for cast iron machining (ISO group K) Proven wear resistance for abrasive cast iron work The coated carbide grade offers excellent wear resistance tailored to the high abrasion typical of cast iron. The WKK20S grade, part of the Tiger‑tec Silver family, is a coated cemented carbide designed to manage the frequent short, breaking chips encountered in grey and nodular castings. This results in longer tool life and fewer interruptions for tool changes, supporting predictable production cycles and improved overall efficiency. The product's material pairing and coating chemistry ensure that edge integrity is maintained under cyclic thermal and mechanical loads, which is essential for abrasive workpiece materials. Controlled chip formation and consistent surface results Chip control is secured by the RK4 chipbreaker, which is optimised for brittle chips and promotes stable evacuation during turning operations. The square 90° geometry combined with a 0.4 mm corner radius produces a robust cutting edge that balances strength with the ability to achieve a consistent surface finish. The 7° free angle reduces cutting forces and supports reliable dimensional control, particularly when machining interrupted surfaces or complex cast-iron contours. Explained simply: the chipbreaker shapes the chips to avoid tangling and the small corner radius helps maintain edge stability without sacrificing surface quality. Integration into productive tooling systems With a plate size of 09 and a thickness of T3, the insert fits standard square-turning holders and is straightforward to index or replace, reducing clamping time and downtime. The tolerance class M ensures repeatable seating and secure clamping in modern toolholders, which is beneficial for medium- to high-volume production runs. By combining a durable grade and a pragmatic geometry, this insert supports higher machining rates and consistent part quality, contributing to improved process economy and lower unit production costs over time. Application scope and practical guidance Designed specifically for ISO group K (cast iron) applications, the insert is best used for general turning and medium-duty finishing of cast components where brittle chip behaviour and abrasive wear dominate. The combination of Tiger‑tec Silver coating and the RK4 geometry makes it less suitable for austenitic stainless steels or highly ductile alloys; selection should match workpiece material and intended cutting parameters. If further technical information or cutting data are required for a specific operation, Metav Werkzeuge’s application team can advise on cutting speeds, feeds and holder selection to achieve the desired balance between productivity and surface quality. Choose the Walter Tools SCMT09T304-RK4 WKK20S for reliable cast iron performance and contact Metav Werkzeuge for tailored application support and rapid supply. Technical Data Article number: SCMT09T304-RK4-WKK20S-WALTER Designation: SCMT09T304-RK4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Geometry: Square 90° Chipbreaker: RK4 Facts Corner radius: 0.4 mm Free angle: 7° Plate size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver Material: Coated cemented carbide Suitable for: Cast iron (ISO group K) Sorteneinsatz: Optimised for abrasive wear and short chips FAQ Which materials is this insert intended for? The SCMT09T304-RK4 WKK20S is formulated primarily for cast iron (ISO group K); the WKK20S grade and Tiger‑tec Silver coating are tuned to manage abrasive wear and short, breaking chips in cast materials. What does the RK4 chipbreaker do? The RK4 chipbreaker controls chip shape for brittle materials, promoting stable evacuation and preventing entanglement; combined with the insert geometry it supports consistent surface quality when turning cast iron. What geometric details influence cutting performance? Key specs are the 0.4 mm corner radius, square 90° outline and 7° free angle, together providing a robust edge for medium-duty turning while assisting dimensional stability and surface finish. Is this insert suitable for finishing operations? The insert can be used for general finishing and medium machining of cast iron; for ultra-fine finishes or very low cutting forces, a smaller radius or specialised finishing geometry may be preferable. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
SCMT09T304-RM4 WMP20G RM4 Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WMP20G grade ensures reliable wear resistance and stable chip formation in demanding stainless applications, while the RM4 chipbreaker and a 0.4 mm corner radius deliver consistent surface finish and process security. Order the SCMT09T304-RM4 WMP20G directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T304-RM4 WMP20G — Square 90° turning/boring indexable insert with Tiger·tec Gold coating (Walter Tools) The SCMT09T304-RM4 WMP20G is a square 90° indexable insert designed for robust turning and reboring tasks, optimised for machining rostfreier Stahl under medium to heavy cutting conditions. Tiger·tec Gold coated carbide grade WMP20G Optimised RM4 chipbreaker for stable chips Square 90° form with 0.4 mm corner radius 7° clearance for secure cutting-edge stability Stable cutting in rostfreier Stahl for fewer interruptions The coated carbide WMP20G grade, part of the Tiger·tec Gold series, is developed specifically to address the challenges of machining rostfreier Stahl: high toughness, tendency to form built-up edge and elevated cutting temperatures. The premium coating improves thermal and abrasive resistance, which translates into longer tool life and more consistent component quality. This results in fewer tool changes and a more predictable production rhythm, supporting higher overall process efficiency. Predictable chip control and enhanced edge life The RM4 chipbreaker geometry is engineered to deliver controlled fragmentation and smooth evacuation of chips in tougher material groups. Combined with the coated substrate, the geometry promotes stable cutting forces and reduces the risk of workpiece damage from erratic chip formation. The outcome is a balance between reliable chip control and extended edge integrity, reducing rework and improving first-pass yield. Robust geometry for consistent surface finish The square 90° form with a 0.4 mm corner radius provides a compromise between edge strength and surface quality: the radius adds toughness for interrupted cuts while still enabling acceptable finishes on the component. A 7° clearance angle reduces flank rubbing and helps maintain the cutting edge at higher temperatures commonly encountered when machining rostfreier Stahl. The insert’s size 09 and thickness T3 ensure mechanical stability in typical toolholders for turning and boring tasks. Practical deployment and process integration This indexable design suits both turning and reboring applications where material conformity and process security are priorities. The combination of grade and chipbreaker makes the insert appropriate for medium to robust cutting parameters; it is particularly effective where consistent chip behaviour and wear resistance are required. Technical teams often value the repeatability and reduced variance in cutting performance, which simplifies process setup and quality control during series production. Choose the Walter Tools Tiger·tec Gold SCMT09T304-RM4 WMP20G insert for dependable rostfreier Stahl turning and contact Metav Werkzeuge for personalised cutting data and swift supply coordination via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: SCMT09T304-RM4-WMP20G-WALTER ISO designation: SCMT09T304-RM4 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Facts Corner radius: 0.4 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Geometry: square 90° Chipbreaker: RM4 Design and special features Coating: Tiger·tec Gold (coated carbide) Substrate: coated carbide Suitable for: rostfreier Stahl Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The SCMT09T304-RM4 WMP20G is optimised for machining rostfreier Stahl; the WMP20G grade supports secure chip formation and stable cutting edges under medium to robust conditions. Which geometry and dimensions does the insert offer? The insert has a square 90° form, corner radius 0.4 mm, clearance angle 7°, insert size 09 and thickness T3, making it suitable for stable turning and reboring setups. How does the RM4 chipbreaker affect performance? The RM4 chipbreaker is designed to produce controlled chips and reliable evacuation in tougher materials, improving process stability and protecting the cutting edge during continuous operation. For which operations is this insert intended? This indexable insert is intended for turning and reboring applications where process security and wear resistance are critical, especially when machining rostfreier Stahl in industrial production. Walter Tools (Walter AG), Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanatory purposes and do not indicate a commercial relationship between our company and the owners of those marks. The listed article is offered as original, factory-new goods from the named manufacturer.
SCMT09T304-RM4 WMP30G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating for extended tool life, RM4 chip control for reliable machining of rostfreier Stahl, and a compact square 90° format for versatile turning and drilling cycles; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. SCMT09T304-RM4 WMP30G drilling/turning indexable insert, Tiger·tec Gold, for rostfreier Stahl — Walter Tools The SCMT09T304-RM4 WMP30G is a coated carbide indexable insert designed for turning and boring operations on rostfreier Stahl, combining stable chip formation with robust cutting-edge performance. Tiger·tec Gold coating for long tool life Optimised RM4 chipbreaker for stable chips Designed for rostfreier Stahl machining Square 90° format with 0.4 mm corner radius Consistent edge life for steady production The Tiger·tec Gold grade delivers a coated carbide substrate engineered for higher wear resistance and thermal stability. For workshop managers and production engineers this translates into fewer insert changes and more predictable process windows. The combination of the grade and the insert’s geometry promotes durable cutting edges, reducing the risk of edge breakdown when machining the tough and heat-generating demands of rostfreier Stahl. The result is measurable productivity gains through longer tool life and less unscheduled downtime. Precise chip control and improved surface quality The RM4 chipbreaker is tailored to manage chip formation during medium to heavy-duty cuts. By producing short, controlled chips, the insert lowers the chance of surface damage and improves coolant penetration to the cutting zone. The 0.4 mm corner radius and 7° clearance angle balance robustness with finishing capability: the radius supports stronger edge retention under interrupted cuts, while the relief angle reduces rubbing and heat build-up. For applications where consistent finish and repeatable dimensions are required, this insert offers a reliable compromise between strength and form accuracy. Simple integration and predictable results Presented in a square 90° format, the insert fits many common toolholders and offers four usable corners, supporting economical index changes in production. Identification by the designation and series makes inventory handling straightforward: the Tiger·tec Gold series and the WMP30G grade are optimised specifically for rostfreier Stahl, ensuring compatibility with material behaviour governed by ISO 513 M-classifications. With clear specifications and a standardised geometry, the insert facilitates reproducible cutting conditions and easier process documentation for quality assurance. Contact Metav Werkzeuge to discuss the best toolholder pairing and cutting parameters for the SCMT09T304-RM4 WMP30G or to request tailored application advice Technical data SKU: SCMT09T304-RM4-WMP30G-WALTER Designation: SCMT09T304-RM4 WMP30G Product type: Drilling/boring and turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Size: 09 Thickness: T3 Corner radius: 0.4 mm Relief angle: 7° Plate shape: Square 90° Special features Grade / coating: WMP30G (coated carbide, Tiger·tec Gold) Chipbreaker: RM4 Material application: rostfreier Stahl Execution: T Format: Quadrate insert (square 90°) FAQ What materials is this insert suitable for? The SCMT09T304-RM4 WMP30G insert from Walter Tools is specified for machining rostfreier Stahl; the WMP30G grade and Tiger·tec Gold coating are optimised for the toughness and heat characteristics of this material group. How does the RM4 chipbreaker affect cutting performance? The RM4 chipbreaker creates short, manageable chips and reduces the risk of built-up edge, which improves surface quality and process stability when using the SCMT09T304-RM4 WMP30G in turning or boring applications. Which cutting edge geometry supports roughing and finishing? The combination of the 0.4 mm corner radius and 7° clearance angle gives a balance between robust cutting for higher feeds and the ability to achieve fine surface finishes with appropriate feed and speed settings using this Walter Tools insert. How many cutting edges are available per insert and what is the form factor? The square 90° format provides four usable cutting corners per insert, making the SCMT09T304-RM4 WMP30G a cost-effective option for shops that require frequent indexing and predictable replacement intervals. Is the insert compatible with common toolholders? Yes; the SCMT09T304-RM4 WMP30G follows standard insert geometry and can be mounted in compatible holders designed for square 90° turning and boring inserts—confirming holder seat dimensions ensures correct seating and performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM20S grade for stable cutting performance in challenging materials; the RM4 chipbreaker and a 0.4 mm corner radius ensure controlled chip formation and secure cutting-edge life. Order the SCMT09T304-RM4 WSM20S directly via Metav Werkzeuge or consult our specialists for application advice. SCMT09T304-RM4 WSM20S indexable insert — square 90° insert for stainless and superalloys, Walter Tools SCMT09T304-RM4 WSM20S is a multi‑purpose indexable insert designed for demanding applications in heat‑resistant alloys and rostfreier Stahl, combining a robust geometry with advanced coating technology Tiger‑tec Silver coating for thermal stability WSM20S grade for tough materials and titanium RM4 chipbreaker for secure chip control 0.4 mm corner radius with 7° clearance angle Consistent performance on rostfreier Stahl and superalloys The combination of the WSM20S carbide grade and Tiger‑tec Silver coating is engineered for materials that generate high cutting temperatures and tend to form built‑up edge. With a focus on thermal resistance and edge stability, this insert supports a controlled chip flow and reduces the risk of rapid flank wear. The specified grade targets both rostfreier Stahl and heat‑resistant superalloys, offering manufacturers higher process reliability when machining difficult alloys. Geometry and chip control that reduce rework The RM4 chipbreaker and the 0.4 mm corner radius work together to produce short, manageable chips and to distribute cutting forces across a stable cutting edge. The square 90° form delivers robust support in interrupted cuts and provides versatile orientation options in common toolholders. The 7° clearance angle helps maintain a secure cutting geometry that reduces rubbing and promotes repeatable surface quality, translating into fewer corrective operations and increased throughput. Integration into productive workflows As a coated carbide indexable insert with the proven Tiger‑tec Silver technology, this plate supports predictable tool life and consistent results across shifts. The insert’s dimensions and tolerance class facilitate rapid indexing and reliable seating in the toolholder, contributing to shorter set‑up times and steady production rates. For applications where material variation and thermal load are critical, the insert offers a balance of wear resistance and edge stability to help sustain productive machining cycles. Contact Metav Werkzeuge for tailored cutting data and to discuss the SCMT09T304-RM4 WSM20S application in specific rostfreier Stahl or superalloy projects Technical data Article number: SCMT09T304-RM4-WSM20S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT09T304-RM4 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S ISO designation: SCMT09T304-RM4 WSM20S Facts Shape: Square 90° Size: 09 Thickness: T3 Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: RM4 Tolerance class: M Special features Coating: Tiger‑tec Silver Material suitability: S / M Application focus: rostfreier Stahl and heat‑resistant superalloys/titanium Robust geometry for interrupted cuts Coated carbide construction FAQ What materials is this insert suitable for? The SCMT09T304-RM4 WSM20S from Walter Tools is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S) and can be used where thermal resistance and edge stability are required. How does the RM4 chipbreaker help machining stainless steels? The RM4 chipbreaker on the SCMT09T304-RM4 WSM20S promotes secure chip formation and reduces built‑up edge tendencies, improving process stability when machining rostfreier Stahl. Why is the 0.4 mm corner radius important? A 0.4 mm corner radius balances edge strength and surface finish, offering a robust cutting edge that withstands higher mechanical loads while maintaining acceptable machined surface quality. Can this insert be used for interrupted cuts or heavy engagement? The square 90° geometry and the insert’s coated carbide composition from Walter Tools deliver the mechanical support and edge resilience suitable for interrupted cuts and demanding engagement conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
SCMT09T304-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust RM4 chipbreaker and a 7° clearance for stable cutting in demanding stainless steel and superalloy applications; order directly via Metav Werkzeuge or contact the sales team for technical advice. SCMT09T304-RM4 WSM30S indexable insert for drilling and turning — Walter Tools, Tiger·tec Silver, RM4 chipbreaker SCMT09T304-RM4 WSM30S is an indexable insert designed for demanding drilling/reaming and turning tasks in stainless steel and heat-resistant superalloys, combining a coated carbide grade with a geometry optimised for secure chip formation. Tiger·tec Silver coated carbide grade WSM30S RM4 chipbreaker for predictable chip control 7° clearance angle for secure edge engagement Square 90° form with 0.4 mm corner radius Edge stability and thermal resistance for hard-to-cut alloys The combination of the Tiger·tec Silver coating and the WSM30S grade provides improved thermal stability and wear resistance for machining tough materials. The coated carbide construction reduces flank wear and supports sustained cutting at elevated temperatures, which is particularly important when machining stainless steel and heat-resistant superalloys. The RM4 chipbreaker contributes to consistent chip formation, reducing the risk of built-up edge and improving process reliability. These characteristics translate into longer effective edge life and fewer tool changes on the shop floor. Predictable performance and productivity in production cycles With a 7° relief angle and a 0.4 mm corner radius on a square 90° platform, the insert offers a predictable contact geometry that benefits repeatable part quality. The robust geometry supports stable cutting forces and contributes to a consistent surface finish, while the grade’s resistance to thermal loading helps maintain the cutting edge under intermittent and continuous cuts. For manufacturing environments focused on throughput and reproducibility, the insert’s design helps reduce downtime associated with rework and frequent tool replacement, delivering measurable improvements in process stability. Simple integration and application flexibility The ISO-style designation and compact 09 size make the insert straightforward to identify and integrate into existing toolholder systems for drilling and turning tasks. Its T3 thickness and square shape provide versatility across a range of tooling set-ups, while the combination of coating and chipbreaker allows application in both turning and drilling/reaming operations depending on holder geometry. For further compatibility checks or recommendations for specific holders and cutting data, Metav Werkzeuge provides technical support and application guidance tailored to production needs. Contact Metav Werkzeuge today to discuss how the Walter Tools SCMT09T304-RM4 WSM30S insert can improve cutting stability for stainless steel and superalloy projects — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number / SKU: SCMT09T304-RM4-WSM30S-WALTER ISO designation: SCMT09T304-RM4 WSM30S Series: Tiger·tec Silver Grade: WSM30S Brand: Walter Tools Core data Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Shape: Square 90° Materials & features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: RM4 Tolerance class: M Suitable for: stainless steel; heat-resistant superalloys and titanium Application: drilling/reaming and turning indexable insert FAQ What materials is this insert suitable for? The SCMT09T304-RM4 WSM30S insert from Walter Tools is specified for machining stainless steel and heat-resistant superalloys and titanium, offering a grade and coating tuned to those material demands. How does the RM4 chipbreaker benefit production? The RM4 chipbreaker on the SCMT09T304-RM4 promotes stable chip formation and reliable evacuation, reducing interruptions and supporting consistent surface quality during turning and drilling operations. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal resistance and wear protection for the insert, which helps to extend edge life under elevated cutting temperatures and demanding machining conditions. Is the insert compatible with standard holders and ISO tooling systems? Yes — the ISO-style designation and square 90° form of the SCMT09T304-RM4 make it compatible with corresponding standard toolholders for both drilling/reaming and turning, depending on holder geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new merchandise from the manufacturer (Walter Tools).
SCMT09T304-RP4 WPP10G RP4 Wendeplatten - Walter Tools
SCMT09T304-RP4 WPP10G Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte von Walter Tools Die SCMT09T304-RP4 WPP10G ist eine Wendeschneidplatte für präzise Zerspanung von Stahl in Dreh- und Bohrprozessen und bietet hohe Standzeit dank moderner Beschichtungstechnologie. SCMT09T304-RP4 WPP10G von Walter Tools Tiger·tec Gold Beschichtung für lange Standzeit Optimierter Spanbrecher RP4 für Stahl Quadratische Form 90° mit Eckenradius 0,4 Freiwinkel 7° und Plattendicke T3 für Stabilität Hohe Verschleißfestigkeit durch moderne Beschichtung und Schneidstoff Die SCMT09T304-RP4 WPP10G nutzt die Tiger·tec Gold Beschichtung auf beschichtetem Hartmetall, wodurch die Lebensdauer der Wendeschneidplatte deutlich steigt. Diese Kombination reduziert den Verschleiß bei typischen Stahlanwendungen und sorgt für konstante Schneidkanten. Für Anwender bedeutet das weniger Rüst- und Stillstandszeiten sowie planbare Werkzeugwechselintervalle. Prozesssicherheit und Zerspanungsbild dank Geometrie Der speziell entwickelte Spanbrecher RP4 ist auf die Spanbildung beim Drehen und Aufbohren von Stahl abgestimmt und liefert gleichmäßige Spanformung. Der Freiwinkel 7° und der Eckenradius 0,4 verbessern die Stabilität der Schneide und tragen zu besserer Oberflächengüte bei. Quadratische Plattenform 90° bietet bei Dreh- und Bohroperationen zusätzliche Positionierungsflexibilität. Einfache Integration in Produktionsprozesse und Anwendernutzen Mit Toleranzklasse M, Plattengröße 09 und Plattendicke T3 ist die Platte für den robusten Einsatz in Werkstatt und Produktion ausgelegt. Die Wendeschneidplatte richtet sich an Anwender, die auf reproduzierbare Ergebnisse und wirtschaftliche Zerspanung setzen. Für Einsteiger: Der Spanbrecher steuert die Spanabfuhr, der Freiwinkel beeinflusst Schnittkräfte und Standzeit. Empfehlung: Setzen Sie auf die Kombination aus Tiger·tec Gold Beschichtung und optimiertem Spanbrecher für zuverlässige, effiziente Zerspanung; bei Fragen oder Bedarf an technischer Beratung erreichen Sie Metav Werkzeuge GmbH per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: SCMT09T304-RP4-WPP10G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Typ: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Bezeichnung: SCMT09T304-RP4 Sorte: WPP10G Fakten Freiwinkel: 7° Eckenradius: 0,4 mm Plattenform: Quadrat 90° Plattengröße: 09 Plattendicke: T3 Toleranzklasse: M Besonderheiten Spanbrecher: RP4 Beschichtung: Tiger·tec Gold Schneidstoff: beschichtetes Hartmetall Anwendungsgruppe: Stahl (ISO P) FAQ Welche Werkstoffe verarbeitet die Platte vorrangig? Die SCMT09T304-RP4 WPP10G von Walter Tools ist speziell für die Bearbeitung von Stahl konzipiert und eignet sich für unlegierte sowie legierte Stähle entsprechend ISO P. Was bewirkt die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung erhöht die Verschleißfestigkeit und Standzeit der Wendeschneidplatte und sorgt für konstante Schneidkanten bei anspruchsvollen Stahlanwendungen. Wie beeinflusst der Spanbrecher RP4 den Prozess? Der Spanbrecher RP4 formt die Späne kontrolliert, reduziert Aufbauschneiden und verbessert die Spanabfuhr, was zu stabiler Zerspanung und besserer Oberflächengüte führt. Für welche Einsatzfälle ist die Platte besonders geeignet? Die Platte eignet sich für produktive Dreh- und Aufbohrprozesse in der Serienfertigung und für Anwender, die lange Werkzeugstandzeiten und konstante Ergebnisse benötigen. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) ist weltweit tätig. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT09T304-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Combining Tiger‑tec Gold coating and the RP4 chipbreaker, this indexable insert delivers consistent performance and extended tool life for steel machining; its square 90° form and 0.4 mm corner radius ensure robust edge strength in demanding turning and boring tasks. Order via Metav Werkzeuge or consult our specialists for technical advice and availability. SCMT09T304-RP4 WPP20G indexable insert – Square 90°, 7° relief for steel | Walter Tools The SCMT09T304-RP4 WPP20G is a square indexable insert, part of the Tiger‑tec Gold range, engineered for efficient turning and drilling/boring applications in steel (ISO P). Tiger‑tec Gold coated, enhanced tool life RP4 chipbreaker for stable chip control Square 90° shape with 0.4 mm corner radius Designed for steel machining (ISO P) High process reliability through advanced coating and chip control The Tiger‑tec Gold coating combined with a coated carbide substrate provides a balanced mix of wear resistance and toughness that supports longer tool life under the typical heat and chip formation encountered when machining steel. The RP4 chipbreaker is optimised to produce predictable, short chips in a range of turning and light boring operations, reducing downtime due to chip-related interruptions. This technical pairing results in improved cycle times and repeatable surface quality, which is particularly important in production environments that prioritise throughput and consistency. Robust edge geometry for stable cutting and tool life A square 90° insert with a 0.4 mm corner radius delivers a stable cutting edge that resists chipping while maintaining dimensional control in interrupted cuts or when taking heavier depths of cut. The modest 7° relief angle supports a secure cutting engagement without excessive cutting forces, and the T3 insert thickness contributes to mechanical rigidity in the toolholder. These geometric choices make the insert suitable for operators seeking predictable tool behaviour and a reduced risk of edge breakouts during demanding sequences. The grade WPP20G is specified for general-purpose steel machining, giving a reliable compromise between wear resistance and toughness. Production-ready choice with trusted manufacturer backing Selection of a Tiger‑tec Gold grade from Walter Tools delivers not only technical performance but also the assurance of a recognised tooling partner. The combination of balanced grade chemistry and engineered chip control supports stable manufacturing processes and consistent part quality. For integrators and workshop managers, this insert offers a pragmatic route to lower overall tooling costs through fewer index changes and fewer rejects. For further specification of feeds and speeds or to match the insert to a particular toolholder and operation, Metav Werkzeuge’s technical consultants are available to advise with application-specific recommendations. For application support and current availability of Walter Tools inserts such as the SCMT09T304‑RP4 WPP20G, contact Metav Werkzeuge for expert guidance and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCMT09T304-RP4-WPP20G-WALTER Designation: SCMT09T304-RP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Specifications Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: M Shape: Square 90° Materials & applications Material: Coated carbide (Tiger‑tec Gold technology) Chipbreaker: RP4 Application: Steel (ISO P) Execution: T Suitable for turning and drilling/boring tasks in production environments FAQ What materials is this insert designed for? The SCMT09T304‑RP4 WPP20G is specified for steel machining (ISO P); the WPP20G grade is tailored to manage the heat and chip formation typical of steel. How does the RP4 chipbreaker affect performance? The RP4 chipbreaker promotes stable, controllable chip formation during turning and light boring, improving process security and reducing interruptions from long or tangled chips. What does the 0.4 mm corner radius mean for tool life and surface finish? A 0.4 mm corner radius provides a durable cutting edge that resists chipping under heavier cuts while still enabling acceptable surface finishes and dimensional control in many turning applications. Is this insert suitable for interrupted cuts? With its square 90° shape, modest relief angle and robust corner radius, the insert is well suited to applications that include moderate interruption; however, toolholder rigidity and cutting parameters should be matched to the operation. Where can technical recommendations for feeds and speeds be obtained? Application‑specific feeds and speeds for the SCMT09T304‑RP4 WPP20G are available from Metav Werkzeuge’s technical team, who can advise based on machine, material and clamping conditions. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
SCMT09T304-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WPP30G grade and a 0.4 mm corner radius for dependable, efficient steel turning and boring. Order the SCMT09T304-RP4 WPP30G insert directly via Metav Werkzeuge or consult our specialists for cutting-data and application advice. SCMT09T304-RP4 WPP30G – Square 90° turning and drilling indexable insert, for steel, Walter Tools The SCMT09T304-RP4 WPP30G is a Tiger·tec Gold‑coated square 90° indexable insert engineered for productive steel turning and light boring tasks, offering controlled chip formation and stable edge life. Tiger·tec Gold coating for high process security WPP30G grade optimised for steel machining Square 90° geometry with 0.4 mm corner radius RP4 chipbreaker for consistent chip control Improved productivity through proven coating and grade The combination of the Tiger·tec Gold coating and WPP30G grade delivers consistent wear resistance and predictable tool life in steel applications. The coating reduces friction and improves temperature resistance at the cutting edge, which results in fewer unplanned indexings and longer productive cycles. For production-oriented environments this means higher machine uptime and a lower cost per component when compared with uncoated or older generation grades. The insert’s specification as a coated carbide component ensures compatibility with standard cutting parameters for carbon and alloy steels. Precise chip control and stable surfaces for reliable finishing Equipped with an RP4 chipbreaker, the geometry is tuned to produce short, controllable chips during common turning operations, which reduces the need for frequent machine pauses to clear chips and minimises the risk of surface damage. The 0.4 mm corner radius promotes a balance between edge strength and surface finish, enabling stable results in shoulder and light profiling passes. The square 90° form supports a robust cutting edge for facing and shoulder cuts while still permitting economical insert indexing. Geometry and specification tailored for workshop integration With a 7° clearance angle and a nominal plate thickness of T3, the insert fits into standard square‑seat toolholders designed for this ISO designation. The compact insert size (09) and the standardised SCMT geometry simplify tool setup and changeover across machines, facilitating fast replacement and consistent repeatability. The insert’s tolerance class M supports reliable positioning and repeat accuracy in automated tool magazines and manual tool changes alike. Application clarity and material suitability Designed primarily for machining steel, the grade distribution within the WPP30G family emphasises wear resistance while retaining sufficient toughness for general‑purpose operations. The cutting‑edge design and coating make the insert particularly suitable for continuous and interrupted turning where a reliable balance between edge life and surface quality is required. For engineers seeking predictable machining outcomes, the insert provides a clear compromise between aggressive feed capability and surface integrity. Contact Metav Werkzeuge for tailored cutting data, sample trials and advice on integrating the Walter Tools SCMT09T304-RP4 WPP30G insert into existing tool setups Technical data Article number: SCMT09T304-RP4-WPP30G-WALTER Item designation: SCMT09T304-RP4 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 0.4 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Tolerance class: M Features Coating: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP4 Geometry: Square 90° Material suitability: steel Product type: drilling/boring and turning indexable insert Substrate: coated carbide FAQ What materials is this insert designed for? The SCMT09T304-RP4 WPP30G is specified for machining steel; the WPP30G grade and Tiger·tec Gold coating are optimised for typical steel heat and chip formation. Which chipbreaker is fitted and what benefit does it bring? The insert features an RP4 chipbreaker that ensures short, manageable chips and stable cutting conditions, improving surface quality and reducing downtime for chip clearance. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold coating reduces flank and crater wear by lowering friction and improving thermal resistance, which contributes to a more consistent tool life under industrial turning conditions. Is the SCMT09T304-RP4 compatible with standard toolholders? Yes; the SCMT form and the T3 thickness conform to widely used square‑seat toolholder standards, facilitating straightforward integration and quick index changes. What are the main advantages of the 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between edge robustness and surface finish capability, suitable for shoulder cuts and general turning where moderate strength and good finish are required. Manufacturer: Walter Tools; part of Walter AG; Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the Sandvik group. Marked trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
SCMT09T308-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from productive machining and reliable edge life thanks to the Tiger‑tec Gold grade and the E47 chipbreaker; order the SCMT09T308‑E47 WPP20G inserts directly via Metav Werkzeuge or contact our consultants for application support. SCMT09T308-E47 WPP20G – square 90° indexable insert for drilling/boring, Tiger‑tec Gold (Walter Tools) The SCMT09T308‑E47 WPP20G is a square 90° indexable insert intended for drilling and boring in steel; optimised to deliver consistent chip formation and extended tool life under typical steel cutting conditions Tiger‑tec Gold coating for high wear resistance E47 chipbreaker for consistent chip control Square 90° form with 0.8 mm corner radius Optimised for steel machining (ISO P) High wear resistance for sustained productivity The combination of the Tiger‑tec Gold coating and the WPP20G grade provides a robust coated carbide surface that balances wear resistance with toughness. This makes the insert particularly suited to the thermal and mechanical demands of steel machining. The coating reduces flank and crater wear during continuous operation, which supports longer tool life and fewer indexings. Where process stability and predictable performance are priorities, the E47 chipbreaker further contributes by shaping chips to improve evacuation and reduce the likelihood of re-cutting, resulting in steadier cycle times and less machine downtime. Stable geometry that improves hole quality and repeatability A square 90° plate form combined with a 0.8 mm corner radius and a clearance angle of 7° yields a stable cutting edge for drilling and boring operations. The specified tolerance class M and plate thickness T3 support secure clamping and repeatable positioning in the toolholder, helping to maintain concentricity and surface finish across multiple indexings. These geometric attributes translate into fewer rejects and reduced secondary operations, which is particularly beneficial in production runs where dimensional consistency is essential. Application focus and process advantages for steel workpieces Designed for the ISO P material group, this insert is suitable for unalloyed and alloyed steels, where typical chip formation and heat generation demand a dedicated grade. The WPP20G grade is engineered to offer a compromise between wear resistance and toughness, making it a versatile choice across a range of cutting conditions. For shops seeking improved throughput, the insert’s combination of coating, chipbreaker and geometry supports higher effective cutting lengths and consistent surface integrity, helping to lower total machining cost per hole over time. For tailored application advice or to secure SCMT09T308‑E47 WPP20G inserts from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SCMT09T308-E47-WPP20G-WALTER Designation: SCMT09T308-E47 WPP20G Label: Bohr-/Aufbohrwendeschneidplatte SCMT09T308-E47 WPP20G Walter Tools Manufacturer: Walter Tools Core specifications Plate size: 09 Plate form: Square 90° Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Tolerance class: M Features & applications Coating/grade: Tiger‑tec Gold (WPP20G) Chipbreaker: E47 Material suitability: Steel (ISO P) Series: Tiger‑tec Gold FAQ Which materials is this insert suitable for? The SCMT09T308‑E47 WPP20G insert is specified for the ISO P group and is suitable for machining steel, including unalloyed and alloyed steels, as described for the WPP20G grade. What advantages does the Tiger‑tec Gold WPP20G grade provide? The Tiger‑tec Gold WPP20G grade offers a coated carbide solution that improves wear resistance while maintaining toughness, which leads to longer tool life and stable machining performance in steel applications. How does the E47 chipbreaker affect machining? The E47 chipbreaker produces controlled chips that evacuate more reliably from the hole, reducing re-cutting and contributing to steadier cutting forces and improved surface quality during drilling and boring. Why is the 0.8 mm corner radius important? A 0.8 mm corner radius increases edge strength and helps resist chipping under interrupted cuts or higher feed rates, supporting consistent hole geometry and fewer edge failures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of Walter Tools.
SCMT09T308-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable cutting geometry and clear suitability for steel applications to keep machining processes productive and predictable. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. SCMT09T308-E47 WPP20S square boring/reaming indexable insert, Tiger·tec Silver coating, for steel – Walter Tools The SCMT09T308-E47 WPP20S is a square 90° indexable insert designed for efficient boring and reaming of steel components in production environments Tiger·tec Silver coated for durability Optimised for steel machining 7° relief angle for stable cutting 0.8 mm corner radius for robustness Reliable cutting performance for demanding steel work The combination of the WPP20S grade and a coated carbide substrate gives a clear advantage when working with steel: high abrasion resistance and predictable wear behaviour. Thanks to the Tiger·tec Silver technology, the insert sustains longer cutting edge life under typical steel cutting temperatures, which reduces the frequency of tool changes and minimises unplanned downtime. This results in more stable cycle times and contributes to improved process efficiency on medium- to high-volume production runs. Longer tool life through advanced coating and geometry The Tiger·tec Silver coating, paired with a deliberately chosen 0.8 mm corner radius and a 7° relief, emphasises a balance between edge strength and cutting efficiency. The coated surface reduces adhesive wear and improves thermal resistance, while the moderate corner radius protects the edge from chipping during interrupted cuts. These design choices mean fewer regrinds and a higher yield per insert, supporting cost-effective machining without compromising surface finish expectations. Stable chip control and repeatable accuracy for boring operations A square 90° plate form with chipbreaker E47 and size 09 provides consistent chip formation and evacuation in typical steel turning and boring tasks. The tolerance class M and plate thickness T3 ensure reproducible clamping and positioning in standard tool holders, which helps to maintain workpiece accuracy across multiple tool changes. By combining stable geometry with a reliable chip control design, the insert supports higher metal-removal rates while preserving dimensional stability in serial production. For tailored selection or process advice on Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for application support and fast guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: SCMT09T308-E47-WPP20S-WALTER Article designation: SCMT09T308-E47 WPP20S Manufacturer: Walter Tools Product type: boring/reaming indexable insert Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.8 mm Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: M Special features Grade/coating: WPP20S (coated carbide) Chipbreaker: E47 Designation without grade: SCMT09T308-E47 Suitable for: Steel (P) Execution: T FAQ Is this insert suitable for machining steel? Yes. The insert grade WPP20S is designed specifically for steel (P) and offers the wear properties and chip control needed for reliable steel machining. What coating and substrate does the insert have? The insert uses Tiger·tec Silver coating on a coated carbide substrate, which improves thermal resistance and wear behaviour for demanding operations. What are the key geometry specifications of the insert? The plate is a square 90° form with a 0.8 mm corner radius and a 7° relief angle, suitable for stable boring and reaming applications; chip control is provided by the E47 breaker. Which tool designation should be ordered for this insert? Order using the designation SCMT09T308-E47 WPP20S (SKU: SCMT09T308-E47-WPP20S-WALTER) to ensure the correct grade and geometry are supplied. Is the insert designed for interrupted cuts or continuous finishing? The geometry, including the corner radius and relief, provides a compromise between edge strength and finishing capability, making it suitable for a range of steel machining tasks where stability and consistent surface quality are required. Manufacturer: Walter Tools / Responsible: AB Sandvik Coromant; Mossvägen 10; 811 34 Sandviken; Sweden; support.coromant@sandvik.com Protected trademarks and product names are the property of their respective owners and are used for descriptive purposes only. The item offered is an original, factory-new product of the manufacturer.
SCMT09T308-E47 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from a combination of thermal-resistant Tiger·tec Silver grade, a WSM10S coating for secure chip formation, and a precise 0.8 mm corner radius to support reproducible edge life; this increases process stability when machining rostfreien Stahl and high-temperature alloys. Order the SCMT09T308-E47 WSM10S directly via Metav Werkzeuge or ask our consultants if needed. SCMT09T308-E47 WSM10S Drilling/Boring Indexable Insert, Tiger·tec Silver – Walter Tools The SCMT09T308-E47 WSM10S is a square 90° indexable insert engineered for drilling and boring tasks in rostfreien Stahl and heat-resistant superalloys, offering stable cutting edges under elevated thermal and mechanical loads Tiger·tec Silver heat-resistant grade Optimised chip control with E47 chipbreaker 7° relief angle for secure cutting engagement 0.8 mm corner radius for reproducible edge life Higher process stability and cutting performance The combination of the Tiger·tec Silver series and the WSM10S grade provides enhanced thermal resistance and reliable chip formation, which translates into measurable productivity gains in demanding machining operations. The coated carbide composition of the grade is designed to withstand the adhesive tendencies and elevated temperatures typical when machining rostfreien Stahl; this reduces the frequency of edge build-up and supports longer tool cycles. With a 7° relief angle and a square 90° geometry the insert gives predictable engagement and improved cutting stability in axial drilling and enlarging operations, helping to keep tolerances consistent in series production. Clear material guidance and effective chip control The insert is specified for the ISO material groups M (rostfreie Stähle) and S (heat-resistant superalloys and titanium), so selection is straightforward when switching between stainless components and high-temperature alloys. The E47 chipbreaker geometry is optimised to break and evacuate chips in interrupted cutting and in the confined conditions of bores, reducing the risk of re-cutting and surface damage. Such controlled chip flow, together with the insert’s geometry, eases process setup and reduces the need for frequent operator intervention, supporting leaner machining cycles and increased throughput without sacrificing surface quality. Reproducible edge life and consistent results A 0.8 mm corner radius gives a robust cutting edge that balances strength and cutting performance, enabling consistent edge life and easier indexation during reconditioning. The square format allows four cutting edges per insert, improving economy per indexable item, while the tolerance class M ensures interchangeability and precise fit in standard toolholders. Walter Tools’ production tolerances and the Tiger·tec Silver technology contribute to reliable surface finishes and predictable wear behaviour, which supports scheduling and reduces unexpected downtime in the workshop. Consult Metav Werkzeuge for application matching and availability of the SCMT09T308-E47 WSM10S from Walter Tools — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: SCMT09T308-E47-WSM10S-WALTER Designation: SCMT09T308-E47 WSM10S Brand: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.8 mm Insert form: Square 90° Size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: E47 Grade: WSM10S (coated carbide) Material suitability: rostfreien Stahl; heat-resistant superalloys and titanium (S / M) Application: drilling and boring/indexable insert use FAQ What materials is this insert suited for? The SCMT09T308-E47 WSM10S is suitable for rostfreien Stahl and for heat-resistant superalloys and titanium (ISO groups M and S), reflecting the grade’s emphasis on thermal resistance and stable chip formation. Which chipbreaker is used and why does it matter? The insert features the E47 chipbreaker, which is optimised for controlled chip formation in confined drilling and boring operations; this improves evacuation and reduces re-cutting risks when using the SCMT09T308-E47 WSM10S. How does the corner radius affect performance? A 0.8 mm corner radius provides a stronger, more wear-resistant edge that balances durability with cutting efficiency, offering reproducible edge life for repetitive production tasks with the SCMT09T308-E47 WSM10S. Can this insert be used in interrupted cuts? Yes, the combination of the Tiger·tec Silver technology, the E47 chipbreaker and the square 90° geometry supports interrupted cutting situations typically encountered during drilling and enlarging operations with this insert. What tolerance class and size should be expected? This insert is supplied in tolerance class M, size 09 and thickness T3, which ensures precise seating in compatible toolholders and predictable indexation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used here for identification and explanation only and imply no affiliation between Metav Werkzeuge and the trademark holders. The offered item is an original, factory-new product of the manufacturer.
SCMT09T308-E47 WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating, the WSM20S grade and the compact square geometry with a 0.8 mm corner radius for reliable machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application support. SCMT09T308-E47 WSM20S — Drilling/boring indexable insert, Tiger·tec Silver, Walter Tools; 0.8 mm radius, 7° clearance A SCMT09T308-E47 WSM20S indexable insert engineered for drilling and boring operations in stainless steel and high‑temperature alloys, providing stable chip control and consistent cutting performance. Tiger·tec Silver coating for high-temperature stability WSM20S grade for stainless steels and superalloys Square 90° shape with 0.8 mm corner radius 7° clearance angle for secure cutting-edge contact Consistent performance in stainless steel and superalloys The combination of the WSM20S grade with the Tiger·tec Silver coating targets the common challenges of machining stainless steel and heat‑resistant superalloys: high heat generation, work‑hardening and difficult chip formation. The coated cemented‑carbide substrate is tailored to support stable chip formation and to resist thermal and mechanical wear, resulting in fewer unscheduled tool changes and more predictable component quality. This reduces scrap rates and increases process reliability on serial production runs. Geometry engineered for edge security and surface quality A square 90° geometry paired with a 0.8 mm corner radius and a 7° clearance angle balances edge strength and surface finish. The corner radius increases the cutting‑edge robustness for plunge and axial cuts, while the moderate relief angle limits rubbing and heat build‑up. The fitted E47 chipbreaker is designed to promote controlled chip segmentation under typical drilling and boring feed conditions, helping to avoid built‑up edge and to sustain a consistent surface integrity on the workpiece. Productivity gains through predictable tool life and straightforward handling The insert’s dimensions and tolerances favour quick indexing and repeatable set‑up in compatible toolholders, supporting short changeover times and steady cycle times. As a coated, indexable solution, it offers an economical path to extended cutting life and fewer complete tool replacements. The result is improved uptime and lower cost‑per‑part in medium to high‑volume machining of demanding materials, with the added confidence of a brand‑grade design focused on process stability. For recommendation and supply of Walter Tools inserts such as the SCMT09T308‑E47 WSM20S, please contact Metav Werkzeuge for tailored advice and fast delivery — eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: SCMT09T308-E47-WSM20S-WALTER Designation: SCMT09T308-E47 Full designation: SCMT09T308-E47 WSM20S Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Shape: Square 90° Thickness: T3 Tolerance class: M Applications & features Coating / substrate: Coated cemented carbide (Tiger·tec Silver) Chipbreaker: E47 Suitable for: stainless steel Suitable for: heat‑resistant superalloys and titanium Typical use: drilling and boring operations FAQ Which materials is this insert intended for? The SCMT09T308‑E47 WSM20S insert is designed primarily for stainless steel and for heat‑resistant superalloys and titanium, reflecting the WSM20S grade’s emphasis on thermal stability and secure chip formation. What is the corner radius and how does it affect cutting? The insert features a 0.8 mm corner radius; this radius strengthens the cutting edge for plunge and axial engagements and contributes to a consistent surface finish when machining demanding materials. Which chipbreaker is fitted and what is its benefit? This insert uses the E47 chipbreaker, which promotes controlled chip segmentation and reliable evacuation in drilling and boring operations, reducing the risk of built‑up edge. How does the Tiger·tec Silver series support production? The Tiger·tec Silver coating increases heat resistance and wear performance; paired with the WSM20S grade, it helps to extend tool life and maintain process stability over longer runs. Is the insert compatible with standard toolholders for drilling and boring? The SCMT09T308‑E47 insert conforms to common square 90° insert dimensions and tolerance class M, enabling straightforward indexing in compatible drilling and boring toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarked names and product designations are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the named brands. It is an original, factory‑new product of the manufacturer.
SCMT09T308-E47 WSM30S WSM30S Wendeplatten - Walter Tools
Reliable machining performance for demanding materials: high wear resistance from the Tiger·tec Silver coating, precise E47 chip control and a robust 0.8 mm corner radius deliver stable cutting in stainless steels and heat‑resistant alloys. Order originals via Metav Werkzeuge or consult the Metav team for application guidance. SCMT09T308-E47 WSM30S — drill/boring indexable insert, Tiger·tec Silver, Walter Tools The SCMT09T308-E47 WSM30S is a square 90° indexable insert engineered for drilling and boring operations in stainless steels and heat‑resistant superalloys, combining a wear‑resistant coating with an optimised chipbreaker for consistent metal removal. Tiger·tec Silver coating for wear resistance Optimised E47 chipbreaker for reliable chips 0.8 mm corner radius for strong cutting edge Suitable for stainless steels and superalloys Proven process security when machining stainless and superalloys The Tiger·tec Silver grade delivers consistent wear resistance and temperature tolerance, which is crucial when working with ISO group M (stainless steels) and S (superalloys and titanium). The coated cemented carbide grade supports stable cutting edges during interrupted cuts and high thermal loads, reducing the frequency of tool changes and improving overall machine uptime. Clear, repeatable behaviour under load translates into fewer production stops and a more predictable cost per part. Stable chip formation and surface quality through engineered geometry The E47 chipbreaker has been developed to control long, stringy chips that are typical in austenitic stainless steels. By promoting defined chip segmentation and evacuation, the chipbreaker reduces the risk of built‑up edge and improves surface finish on bore and drill exits. Combined with a 7° clearance angle, the geometry lowers friction and helps maintain dimensional accuracy over a longer tool life, so the machining process stays both efficient and reliable. Robust edge strength for demanding operations A 0.8 mm corner radius increases edge stability during plunge and radial cutting, offering a balance between strength and cutting precision. This radius helps absorb impact loads and resists micro‑chipping when encountering hard inclusions or workpiece variability. The square 90° insert form provides four usable cutting edges per insert, enabling economical edge usage and quick index changes to sustain cycle times in production environments. Application guidance and selection advice for process optimisation For bore and reaming tasks in tougher materials, selecting the WSM30S grade ensures thermal stability and controlled wear. The insert thickness T3 and size 09 suit medium‑duty drill/boring holders where rigidity and chip control matter. When setting cutting parameters, favour slightly reduced cutting speeds and increased feed per tooth for stainless steels to avoid work hardening; for superalloys, focus on maintaining coolant or appropriate lubrication to manage heat. Correct holder clamping and stable workholding complete the process chain for predictable results. Discuss the Walter Tools Tiger·tec Silver inserts with Metav Werkzeuge for tailored recommendations and fast delivery from Metav Werkzeuge Technical Data Article number: SCMT09T308-E47-WSM30S-WALTER Product designation: SCMT09T308-E47 WSM30S Product type: Drill/boring indexable insert Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Square 90° Size: 09 Thickness: T3 Tolerance class: M Features & applications Chipbreaker: E47 Grade: WSM30S Coating/series: Tiger·tec Silver Material groups: S / M Suitable for: stainless steels (ISO M), superalloys and titanium (ISO S) FAQ What materials is this insert designed for? The SCMT09T308-E47 WSM30S from Walter Tools is designed primarily for stainless steels (ISO M) and for heat‑resistant superalloys and titanium (ISO S), offering thermal stability and controlled wear. How does the E47 chipbreaker improve machining? The E47 chipbreaker on the SCMT09T308-E47 WSM30S promotes defined chip segmentation and evacuation, reducing built‑up edge and improving surface finish in drilling and boring operations. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and resistance to chipping during plunge or interrupted cuts, enhancing component quality and prolonging service intervals for the insert. Can this insert be used in standard drill holders? The insert form and T3 thickness suit common drill and boring toolholders for medium‑duty applications; ensure correct clamping and holder rigidity to exploit the insert’s performance. Which series and coating technology does this grade belong to? This grade is part of the Tiger·tec Silver series; the coating technology supports wear resistance and temperature tolerance under demanding cutting conditions. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SCMT09T308-FK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the high productivity and stable chip control of a Tiger·tec Silver grade insert, paired with a proven FK6 chipbreaker and a 0.8 mm corner radius for reliable cast iron turning. Order genuine inserts directly via Metav Werkzeuge or consult the team for application-specific advice. SCMT09T308-FK6 WKK20S indexable turning insert – Tiger·tec Silver, for cast iron, Walter Tools The SCMT09T308-FK6 WKK20S is a square indexable turning insert designed for efficient machining of cast iron components, combining a robust coated-carbide grade with a chipbreaker tuned for short, brittle chips. Tiger·tec Silver coating for extended tool life Optimised for cast iron machining (ISO group K) FK6 chipbreaker for controlled chip formation Square 90° insert with 0.8 mm corner radius Higher throughput with predictable tool life The coated-carbide WKK20S grade from the Tiger·tec Silver family is engineered to resist the abrasive wear typical of cast iron machining. The combination of a wear-resistant coating and a tough substrate means fewer interruptions for tool changes and more consistent component quality, which translates into measurable production gains. The insert’s economy becomes apparent over multi-shift runs where tool life stability reduces scrap and rework, supporting a more efficient machining cycle. Secure chip control and stable cutting performance A dedicated FK6 chipbreaker and the square 90° geometry provide controlled chip formation and evacuation when machining grey or ductile cast iron. The 0.8 mm corner radius softens the cutting edge load, improving edge strength without compromising dimensional stability. The 7° clearance angle supports smooth entry and exit of the insert, reducing vibration and improving surface integrity. These features together deliver reliable cutting behaviour, simplifying process parameter selection and reducing the need for frequent adjustments. Seamless integration and dependable manufacturing support The insert is produced to a tolerance class M and a plate thickness code T3, with the standard 09 size format for broad compatibility with common toolholders. As a square insert, it offers four usable cutting edges, enhancing cost-efficiency per indexation compared with single-edge alternatives. The coated carbide composition and chipbreaker design make the insert particularly suitable for abrasive cast iron alloys (ISO group K), ensuring repeatable results in serial production and repair tasks. For application-specific queries, technical data and assortment advice are available from Metav Werkzeuge. Contact Metav Werkzeuge today for tailored application advice or to order genuine Walter Tools SCMT09T308-FK6 WKK20S indexable turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT09T308-FK6-WKK20S-WALTER Designation: SCMT09T308-FK6 WKK20S Manufacturer: Walter Tools Product type: Indexable turning insert (square 90°) Facts Corner radius: 0.8 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: FK6 Geometry: Square 90° Suitable for: Cast iron (ISO group K) FAQ What materials is this insert intended for? The WKK20S grade and Tiger·tec Silver coating make the SCMT09T308-FK6 particularly suitable for machining cast iron (ISO group K), optimised for abrasive wear and short, breaking chips. Which chipbreaker and geometry are included? The insert features an FK6 chipbreaker with a square 90° geometry and a 0.8 mm corner radius, designed for controlled chip formation in cast iron turning. What are the key dimensional and tolerance specifications? The insert is size 09 with thickness code T3 and tolerance class M; clearance angle is 7° and the corner radius is 0.8 mm, suitable for standard toolholders accepting SCMT-style inserts. Is the coating and grade suitable for production runs? Yes. The Tiger·tec Silver coating combined with the WKK20S coated-carbide grade provides enhanced wear resistance and repeatable tool life for serial production on cast iron components. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only and do not indicate any affiliation with our company. The offered item is an original, factory-new product of the manufacturer.
SCMT09T308-FM4 WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, optimised chip control and robust edge geometry for reliable performance when machining stainless steel; order the SCMT09T308-FM4 WMP20G directly via Metav Werkzeuge or consult our team for tailored tooling advice. SCMT09T308-FM4 WMP20G – Indexable turning insert, Tiger·tec Gold, for stainless steel (Walter Tools) The SCMT09T308-FM20G WMP20G indexable turning insert is designed to provide stable cutting performance and consistent chip formation when machining stainless steel under medium to robust conditions. Tiger·tec Gold coated carbide for high productivity Optimised FM4 chipbreaker for stable chip control Designed for stainless steel machining (ISO group M) 0.8 mm corner radius, 7° relief for reliable edge strength High stability and predictable chip formation for stainless steel The SCMT09T308-FM4 WMP20G insert combines a Tiger·tec Gold coated carbide grade with an FM4 chipbreaker to address the typical challenges of machining stainless steel such as toughness, built-up edge and heat generation. The combination yields stable chip control and reduces the risk of unpredictable edge wear, which translates into more consistent component quality and fewer process interruptions. The coated substrate supports secure chip evacuation even in tougher feeds, maintaining productivity in batch and single-piece production. Coated carbide technology that extends tool life and process reliability The Tiger·tec Gold technology used in this grade is a PVD/CVD-style coating solution optimised for coated carbide substrates; it improves thermal stability and wear resistance during interrupted cuts and elevated temperatures. For ISO group M materials, the coating helps prevent adhesion and reduces flank wear, which can lengthen effective tool life and lower tooling costs per part. Explaining the term: coated carbide means a hard metal body with a thin engineered surface layer that enhances abrasion and heat resistance, enabling higher cutting parameters without compromising reliability. Geometry tailored to edge security and surface finish The insert’s 0.8 mm corner radius and 7° relief angle combine to deliver a balance between edge strength and surface quality. A square 90° insert form provides rigidity and allows economical use of four cutting corners. The FM4 chipbreaker is designed to produce short, controllable chips in stainless steels, reducing entanglement and supporting safer automated operations. These geometric choices reduce the likelihood of chipping at the cutting edge while offering reproducible dimensional results and a predictable surface finish in prismatic turning tasks. Practical use, holder compatibility and process integration This indexable insert is suitable for standard toolholders that accept the SCMT09T3 geometry and is intended for users seeking a practical, production-ready solution for machining rostfreiem stainless steel (ISO group M). In process planning, the grade supports moderate to robust cutting conditions and is a fitting choice where tool life and component consistency are priorities. For technical queries about holder selection, cutting data or process optimisation, Metav Werkzeuge provides application advice to ensure the insert is integrated effectively into existing turning centres and setups. For tailored recommendations on using Walter Tools’ Tiger·tec Gold grade in production, contact Metav Werkzeuge to discuss cutting data, toolholder compatibility and batch strategies via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: SCMT09T308-FM4-WMP20G-WALTER Article designation: SCMT09T308-FM4 Type: Indexable turning insert Manufacturer: Walter Tools Grade/Sort: WMP20G Series: Tiger·tec Gold Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Shape: Square 90° Special features Chipbreaker: FM4 Coating/grade: Tiger·tec Gold (coated carbide) Suitable for: stainless steel (ISO group M) Tolerance class: M FAQ What materials is this insert best suited for? The SCMT09T308-FM4 WMP20G is primarily designed for stainless steel (ISO group M), where its coating and chipbreaker offer improved chip control and reduced adhesion. How does the FM4 chipbreaker affect machining performance? The FM4 chipbreaker optimises chip formation for tougher, ductile materials; in combination with the Tiger·tec Gold grade it promotes short, controllable chips and steadier cutting forces. Which corner radius and relief does the insert provide? This insert features a 0.8 mm corner radius and a 7° relief angle, offering a compromise between edge strength and surface finish for demanding turning operations. Is the insert suitable for automated or unattended machining? Yes, the combination of the coated grade and FM4 chipbreaker supports predictable chips and stable cutting, making it a suitable choice for automated turning centres and lights-out production. Can the SCMT09T308-FM4 fit standard toolholders? The geometry corresponds to common SCMT-style holders; confirm holder compatibility by matching the insert designation and clamping seat before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new product from the manufacturer Walter Tools.
SCMT09T308-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WMP20S grade for secure chip control and extended edge life in stainless steel turning; order directly via Metav Werkzeuge or request application advice from our consultants. SCMT09T308-FM4 WMP20S Drehwendeschneidplatte – Walter Tools (Tiger‑tec Silver, for stainless steel) SCMT09T308-FM4 WMP20S is a square indexable turning insert designed for reliable stainless steel machining in medium to robust conditions Tiger‑tec Silver coated carbide grade WMP20S Optimised for stainless steel machining 7° relief angle for secure cutting Square 90° insert with 0.8 mm corner radius Consistent chip control and durable cutting edge for stainless steel The SCMT09T308-FM4 WMP20S insert combines a Tiger‑tec Silver coating with a robust WMP20S substrate to address the specific demands of stainless steel. The coating technology reduces built-up edge and improves thermal resistance, which in turn supports stable chip formation and fewer interruptions in production. The integrated FM4 chipbreaker is engineered to form short, controllable chips under moderate to heavy turning conditions, helping to reduce manual chip handling and protect workpiece finish. This results in higher effective tool life and more predictable reconditioning intervals. Geometry engineered for repeatable surface quality and edge protection The insert’s square 90° geometry and 0.8 mm corner radius provide a balance between strength and finish: the larger corner radius increases edge stability for robust cuts while maintaining a consistent surface result. A 7° relief angle reduces radial forces and supports secure cutting action without excessive rubbing, which benefits both dimensional accuracy and insert life. The T3 thickness offers a solid seating in standard toolholders, improving clamping stability and repeatability across multiple indexings. These geometric choices make the insert suitable for facing, light profiling and general turning tasks where process reliability is essential. Shop-floor efficiency through predictable performance and easy integration Adopting this insert in production brings measurable gains: the coating and substrate pairing reduce the need for frequent edge changes, while the FM4 chipbreaker minimises secondary operations related to chip control. The result is improved throughput and fewer unscheduled stops, supporting higher overall productivity. Compatibility with common square indexable toolholders permits straightforward replacement and inventory harmonisation. For operations seeking reproducible results in stainless steel turning, this insert offers a pragmatic balance of process reliability and operational economy. For precise stainless steel turning, request application advice and availability for Walter Tools inserts from Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCMT09T308-FM4-WMP20S-WALTER Designation: SCMT09T308-FM4 WMP20S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Shape: Square 90° Thickness: T3 Special features Grade / coating: Tiger‑tec Silver WMP20S Chipbreaker: FM4 Material application: stainless steel Series: Tiger‑tec Silver Tolerance class: M FAQ What materials is this insert optimised for? The insert is optimised for stainless steel; the WMP20S grade and Tiger‑tec Silver coating support secure chip formation and reduced built-up edge when machining stainless steels. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker produces short, controllable chips in turning operations, improving safety at the machining centre and reducing the need for manual chip management. What are the benefits of the 0.8 mm corner radius and square 90° shape? A 0.8 mm corner radius increases edge strength for tougher cuts while the square 90° shape provides four usable cutting edges per index, supporting economical tool use and consistent surface quality. Is this insert compatible with standard toolholders? Yes; the SCMT09T308-FM4 WMP20S insert uses a common square seating and T3 thickness for secure clamping in compatible indexable turning toolholders. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating enhances thermal resistance and wear control, which extends tool life and stabilises cutting performance in demanding stainless steel applications. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.
SCMT09T308-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of the WSM20S Tiger‑tec Silver grade, FM4 chipbreaker and a 0.8 mm corner radius to secure consistent chip control and extended edge life when machining stainless steel and high‑temperature alloys. Order the insert directly via Metav Werkzeuge or consult our technical advisors for process optimisation. SCMT09T308-FM4 WSM20S — indexable turning insert with FM4 chipbreaker for stainless steel and superalloys | Walter Tools SCMT09T308-FM4 WSM20S is a coated carbide indexable insert engineered for demanding turning applications in stainless steel and high‑temperature alloys Tiger‑tec Silver coated grade WSM20S FM4 chipbreaker for secure chip control Square 90° geometry with 0.8 mm radius 7° clearance and T3 thickness for stability Consistent chip control for uninterrupted production The combination of the FM4 chipbreaker and the Tiger‑tec Silver coating prioritises reliable chip formation, which reduces the risk of built‑up edge and interruptions in the machining process. For components made from stainless steel and heat‑resistant alloys the chipformer promotes predictable swarf evacuation and lowers rework rates. Using a dedicated chip control geometry translates into fewer cycle stops and improved process throughput, making the operation more economical and easier to monitor. Machining performance on challenging materials The insert’s WSM20S grade is a coated carbide specifically balanced for the thermal and mechanical demands of superalloys and stainless‑type materials. The material grouping S / M indicates suitability for heat‑resistant superalloys and stainless steel, where heat resistance and edge stability are critical. The square 90° form and 0.8 mm corner radius support both robust roughing and controlled finishing cuts, delivering a consistent surface finish without compromising tool life. Stable seating and repeatable results at the toolpost A 7° clearance combined with T3 thickness enhances insert support and reduces vibration at the toolholder interface. This geometrical setup improves dimensional stability and repeatability across batches, which is particularly valuable in series production. The tolerance class M ensures consistent fitment in compatible toolholders, while the coated grade and optimised chipbreaker contribute to reliable edge life and fewer tool changes during a shift. For guidance on selecting the correct Walter Tools Tiger‑tec Silver insert for a given application or to place an order via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT09T308-FM4-WSM20S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools ISO designation: SCMT09T308-FM4 WSM20S Facts Clearance angle: 7° Corner radius: 0.8 mm Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: M Special features Grade: WSM20S Series: Tiger‑tec Silver Chipbreaker: FM4 Material groups: S / M Applications: stainless steel; heat‑resistant superalloys and titanium FAQ What materials is this insert designed to machine? The SCMT09T308-FM4 WSM20S insert is specified for stainless steel (group M) and for heat‑resistant superalloys and titanium (group S) according to the grade’s capabilities. How does the FM4 chipbreaker improve machining of stainless materials? The FM4 chipbreaker on this Walter Tools insert promotes stable chip formation and evacuation, helping to prevent built‑up edge when machining stainless steel and thereby improving surface integrity. Is the insert suitable for both roughing and finishing operations? Yes, the square 90° geometry with a 0.8 mm corner radius offers a compromise between strength for roughing and the ability to produce controlled finishes when cutting stainless steel and superalloys. What does the Tiger‑tec Silver designation mean for tool life? Tiger‑tec Silver is a coated carbide technology that enhances thermal resistance and edge stability; in the SCMT09T308-FM4 WSM20S it contributes to longer, more predictable tool life when machining demanding materials. Does the insert require a special toolholder or clamping system? The insert uses standard clamping for inserts of its ISO designation; the tolerance class M ensures repeatable seating in compatible toolholders for Walter Tools indexable turning systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanatory purposes and to identify the original manufacturer. The offered article is an original, factory‑new product of the manufacturer.
SCMT09T308-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of durable edge stability and the Tiger·tec Silver coating for consistent performance when machining stainless steels and heat‑resistant superalloys. The robust FM4 chipbreaker and 0.8 mm corner radius support secure chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. SCMT09T308-FM4 WSM30S — Indexable turning insert with Tiger·tec Silver coating for stainless steels and superalloys | Walter Tools The SCMT09T308-FM4 WSM30S is a square 90° turning insert optimised for stable cutting in stainless steels (M) and heat‑resistant superalloys/titanium (S), combining a FM4 chipbreaker with a strong 0.8 mm corner radius for secure machining Tiger·tec Silver coated for high temperature resistance Stable edge geometry for stainless steels M FM4 chipbreaker for dependable chip control Square 90° form with 0.8 mm corner radius Maximise productivity on tough materials with proven coating technology The SCMT09T308‑FM4 WSM30S insert is built around the Tiger·tec Silver coating and the WSM30S grade, which together improve thermal resistance and wear behaviour when machining difficult‑to‑cut alloys. This combination reduces the risk of built‑up edge and supports a stable cutting edge, translating into longer tool life and fewer interruptions. For workshops processing stainless steels and high‑temperature alloys, the result is a measurable increase in productivity and predictable performance under sustained loads. Confident chip control and process reliability for consistent surface quality Equipped with the FM4 chipbreaker, the insert controls chips reliably in medium to heavy turning operations, reducing rework and machine downtimes. The square 90° geometry and the 0.8 mm corner radius provide a strong cutting edge that resists chipping and maintains form tolerances over longer series runs. This leads to consistent surface finishes and repeatable components—key for precision production environments that demand both accuracy and throughput. Practical design that supports easy integration and safer machining With a 7° clearance angle and a standard SCMT format, the insert fits established toolholders and clamping systems, enabling quick tool changes and minimal setup time. The WSM30S grade is specifically tuned for the thermal and mechanical loads of stainless steels (M) and superalloys (S), offering a balance between edge toughness and wear resistance. Shops seeking dependable turning performance will find this insert a pragmatic choice for demanding applications where stability and process security matter. For reliable turning of stainless steels and superalloys, contact Metav Werkzeuge to discuss the Walter Tools SCMT09T308‑FM4 WSM30S insert and receive application guidance — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: SCMT09T308-FM4-WSM30S-WALTER Label: Drehwendeschneidplatte SCMT09T308-FM4 WSM30S Walter Tools ISO designation: SCMT09T308-FM4 WSM30S Product type: Drehwendeschneidplatte Manufacturer brand: Walter Tools Facts Corner radius: 0.8 mm Clearance (relief) angle: 7° Insert form: Square 90° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade / sort: WSM30S Chipbreaker: FM4 Material suitability: S / M (superalloys/titanium and stainless steels) Series: Tiger‑tec Silver FAQ What materials is this insert designed for? The SCMT09T308‑FM4 WSM30S from Walter Tools is designed for stainless steels (M) and heat‑resistant superalloys/titanium (S), making it suitable where thermal stability and edge strength are required. How does the FM4 chipbreaker benefit machining? The FM4 chipbreaker provides controlled chip formation and evacuation, which improves process reliability and surface quality when using the SCMT09T308‑FM4 WSM30S in turning operations. What role does the Tiger·tec Silver coating play? The Tiger·tec Silver coating increases heat and wear resistance for the WSM30S grade, extending edge life during continuous machining of demanding materials. Is the insert compatible with standard SCMT toolholders? Yes, the SCMT09T308‑FM4 format is compatible with standard SCMT toolholders and clamping systems, allowing quick integration into existing turning setups. Why choose a 0.8 mm corner radius for turning? A 0.8 mm radius balances edge strength and cutting forces, offering improved resistance to chipping while maintaining acceptable surface finish for many turning tasks with the SCMT09T308‑FM4 WSM30S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory‑new goods from the manufacturer.
SCMT09T308-FM6 WMP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, an FM6 chipbreaker for stable swarf control and precise geometry for consistent component finish — order or request advice via Metav Werkzeuge for a seamless supply. SCMT09T308-FM6 WMP30G turning insert — Tiger‑tec Gold coating, for stainless steel (Walter Tools) SCMT09T308-FM6 WMP30G is a square 90° indexable turning insert engineered for reliable performance in machining stainless steel under medium to robust conditions Tiger‑tec Gold coating for improved wear resistance Optimised FM6 chipbreaker for stable chip control 7° clearance and 0.8 mm nose radius for finish Suitable for stainless steel machining High‑performance wear resistance for reliable cycle times The coated WMP30G grade, based on Tiger‑tec Gold technology, offers a balanced combination of abrasion resistance and edge strength suitable for stainless steel. The coated carbide construction supports consistent tool life in conditions that promote workhardening and built‑up edge formation. By choosing a grade optimised for this material group, process stability is enhanced and unplanned interruptions are reduced, which helps maintain predictable production throughput and component tolerances. Precise geometry for surface quality and chip management The square 90° form with a 0.8 mm nose radius and 7° clearance is designed to combine robust cutting edge support with the ability to achieve fine surface finishes. The integrated FM6 chipbreaker improves chip segmentation during interrupted or continuous cuts, lowering the risk of entangling swarf and enhancing coolant access. For workshop planners and operators this geometry means fewer reworks and a reduced need for secondary finishing when machining tougher stainless grades. Practical benefits for tooling choice and process security As an indexable insert, the SCMT09T308-FM6 presents a clear economic advantage through multiple indexed cutting edges and straightforward replacement routines. The FM6 chip control and Tiger‑tec Gold coating work together to extend effective edge life under moderate to heavy cutting conditions, reducing tool change frequency and associated machine downtime. Specifying this insert supports reproducible results and contributes to a more predictable cost per component in serial production. For application advice or to secure supply of Walter Tools SCMT09T308-FM6 WMP30G turning inserts, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — recommended for robust stainless steel machining applications Technical Data Article number: SCMT09T308-FM6-WMP30G-WALTER Designation: SCMT09T308-FM6 WMP30G Product type: turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Nose radius: 0.8 mm Insert size: 09 Thickness: T3 Shape: square 90° Special features Series: Tiger‑tec Gold Grade: WMP30G (coated carbide) Chipbreaker: FM6 Application group: M (stainless steel) Tolerance class: M FAQ What material is this insert designed for? The SCMT09T308-FM6 WMP30G is intended for stainless steel machining; the WMP30G grade targets the specific challenges of these alloys. Which chipbreaker does the insert use and what is its advantage? This insert features the FM6 chipbreaker, which promotes controlled chip formation and improved evacuation, reducing the chance of swarf interference in the cut. What are the key geometric details to note? Geometry highlights include a square 90° shape, 0.8 mm nose radius and a 7° clearance angle to balance edge strength with surface finish capability. Is the grade coated and what coating is used? Yes, the grade is a coated carbide belonging to the Tiger‑tec Gold series, optimised for wear resistance and edge stability. How does the insert support production reliability? By combining a robust geometry with an application‑specific grade and a dedicated chipbreaker, the insert reduces tool changes and contributes to consistent component quality and stable cycle times. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SCMT09T308-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Take advantage of a wear-resistant coated grade and a controlled chipbreaker to maintain stable cutting edges and predictable performance in demanding stainless and heat‑resistant alloys; the combination of Tiger·tec Silver coating and the WSM20S grade reduces downtime and supports consistent surface quality — order the insert via Metav Werkzeuge or consult the technical team for application parameters. SCMT09T308-FM6 WSM20S — Indexable turning insert with Tiger·tec Silver and FM6 chipbreaker (Walter Tools) SCMT09T308-FM6 WSM20S is a precision turning insert engineered for long tool life and secure chip control in stainless steels and heat‑resistant superalloys Tiger·tec Silver coating for durable edges WSM20S grade for stainless and superalloys FM6 chipbreaker for consistent chip control 7° clearance with 0.8 mm corner radius Proven cutting performance for difficult materials The SCMT09T308-FM6 WSM20S insert combines a Tiger·tec Silver surface treatment with a WSM20S coated carbide body to address the thermal and mechanical demands of tough materials. The grade has been developed for machining stainless steel and superalloys, where heat resistance and edge stability are critical. Through improved adhesion and a hard, wear‑resistant coating, the insert extends service intervals and preserves a predictable cutting edge, supporting higher productive running times and fewer unexpected tool changes. Consistent chip control and improved surface quality A dedicated FM6 chipbreaker geometry ensures controlled chip formation and evacuation even at elevated cutting temperatures. The combination of the chipbreaker with a 7° clearance and a 0.8 mm corner radius helps to reduce built‑up edge and stabilise cutting forces, which directly benefits the surface finish of the workpiece. Stable chips and lower vibration lead to repeatable part quality and reduce the need for downstream finishing, making the insert a reliable choice for serial production and demanding one‑off work. Geometry and tolerance for repeatable accuracy The square configuration (square 90°) and the compact size lend themselves to robust seat contact and low radial deflection during turning. Manufactured to tolerance class M with a plate T3 thickness, the component offers consistent positional accuracy in pocketed toolholders and turret systems. As an indexable turning insert, it combines convenient indexing with dimensional stability, enabling straightforward re‑use of remaining edges and predictable tool life across multiple machining cycles. Production advantages and application guidance Designed by Walter Tools, this insert supports higher productivity through prolonged edge life and fewer interruptions for insert changes. The grade’s compatibility with stainless steel and heat‑resistant alloys reduces the need for multiple specialised grades in mixed‑material production. For best results, pair the insert with suitable carbide toolholders and adapt feeds and speeds to the workpiece alloy; this approach maximises tool life and process reliability while maintaining consistent dimensional accuracy. For tailored advice on integrating Walter Tools Tiger·tec Silver inserts into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SCMT09T308-FM6 WSM20S and recommended machining parameters. Technical Data Article number: SCMT09T308-FM6-WSM20S-WALTER Designation: SCMT09T308-FM6 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Core Specifications Corner radius: 0.8 mm Clearance angle: 7° Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: M Features & Applications Coating: Tiger·tec Silver Chipbreaker: FM6 Material suitability: Stainless steel (M), Superalloys/Titanium (S) Intended use: Indexable turning insert Execution: T FAQ Which materials is this insert suitable for? The SCMT09T308-FM6 WSM20S insert is designed for stainless steel and heat‑resistant superalloys (ISO groups M and S), leveraging the WSM20S grade for thermal and edge stability. How does the FM6 chipbreaker affect machining? The FM6 chipbreaker on the SCMT09T308-FM6 WSM20S promotes consistent chip formation and evacuation, improving process stability and reducing the risk of built‑up edge during cutting. What are the important geometric details to consider when selecting this insert? Key geometry includes a square 90° form, 0.8 mm corner radius, 7° clearance, T3 thickness and tolerance class M, all of which influence seating, cutting forces and finish quality. Can this insert be used for serial production on bar or chucking machines? Yes; the combination of Tiger·tec Silver coating and WSM20S grade is intended to support longer running times and repeatable performance in serial production, particularly when machining stainless and heat‑resistant alloys. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes; there is no affiliation between our company and the brands named. The offered item is an original, factory‑new product from the manufacturer.
SCMT09T308-FM6 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, reliable chip control and the hard-wearing Tiger·tec Silver coating to improve cycle times and tool life; order directly via Metav Werkzeuge or consult our specialists for application advice. SCMT09T308-FM6 WSM30S turning insert — Walter Tools, Tiger·tec Silver, FM6 chipbreaker The SCMT09T308-FM6 WSM30S is a hardened, square 90° turning insert designed for heavy-duty machining of stainless steels and heat-resistant alloys, offering stable cutting edges and consistent chip formation in demanding turning operations. SCMT09T308-FM6 WSM30S turning insert Tiger‑tec Silver coated carbide grade Optimised FM6 chipbreaker for stainless/titanium 0.8 mm nose radius, 7° clearance angle Increased productivity through a stable cutting edge The Tiger·tec Silver coating paired with the WSM30S grade delivers improved wear resistance and thermal stability in continuous turning. This combination reduces flank wear and supports longer intervals between indexings, which translates into measurable productivity gains. The FM6 chipbreaker is engineered to promote secure chip control when machining tough, ductile materials, helping to avoid built-up edge and frequent interruptions. For manufacturers chasing higher throughput, the result is fewer tool changes and steadier cycle times. Reliable performance on stainless and heat‑resistant alloys Designed specifically for the challenges of stainless steels and superalloys, the insert’s geometry and substrate provide resistance to thermal softening and edge chipping. The 0.8 mm nose radius contributes to dimensional stability and good surface finish without compromising edge strength, while the 7° clearance angle reduces rubbing at the flank. These features make the indexable insert especially suitable where stable cutting forces and consistent surface quality are essential for downstream processes. Precision geometry for consistent component quality The square 90° format and the insert’s T3 thickness deliver rigidity and repeatable seating in tool holders, which supports tighter machining tolerances. The M tolerance class ensures consistent size accuracy across production batches, simplifying tool management and replacement planning. When process reliability matters, the combination of a robust insert form and predictable geometry reduces rework and inspection effort, contributing to smoother production workflows. Practical advantages for workshop integration The insert is supplied in the ISO designation SCMT09T308-FM6 WSM30S, enabling straightforward selection for existing tool holders and holders lists. The coated carbide substrate permits elevated cutting parameters compared with uncoated grades, often allowing for faster metal removal rates while maintaining tool life. Where operators require clear machining windows, the product’s defined chip control and material suitability provide a rational basis for cutting-speed and feed recommendations, supporting rapid process set-up and repeatability. Contact Metav Werkzeuge today to discuss how the Walter Tools SCMT09T308-FM6 WSM30S insert can be integrated into production for improved chip control and longer tool life; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: SCMT09T308-FM6-WSM30S-WALTER Label: Drehwendeschneidplatte SCMT09T308-FM6 WSM30S Walter Tools Manufacturer: Walter Tools Core dimensions Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Designs & special features Coating technology: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM6 Shape: Square 90° Suitable for: stainless steels, heat‑resistant superalloys and titanium FAQ What materials is this insert designed for? The WSM30S grade is formulated for machining stainless steels and heat‑resistant alloys; the coated carbide and FM6 chipbreaker support secure chip formation in these materials. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating increases thermal resistance and reduces wear, allowing higher cutting parameters and extended tool life with the SCMT09T308-FM6 insert. Which chipformer is integrated and what is its advantage? The integrated FM6 chipbreaker promotes controlled chip evacuation and reduces the risk of built-up edge when turning ductile or heat‑resistant materials. Is the geometry suitable for finishing or roughing? With a 0.8 mm nose radius and robust square format, the insert is adaptable to both finishing and medium‑to‑heavy turning operations depending on the chosen feeds and depths of cut. How does the tolerance class affect production? The M tolerance class ensures consistent insert dimensions for predictable seating and repeatable machining, which supports stable tolerances across production runs. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for clarification only and does not imply any affiliation between our company and the brand owners.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com