SCMT09T308-RP4 WPP30G - Wendeplatten Walter Tools
Benefit from the combination of Tiger‑tec Gold durability, precise RP4 chip control and a 7° relief angle for consistent, productive machining; order via Metav Werkzeuge or consult our specialists for cutting parameters and integration advice. SCMT09T308-RP4 WPP30G — Square 90° indexable insert for turning and boring by Walter Tools SCMT09T308-RP4 WPP30G is a coated carbide indexable insert designed for robust performance in turning and boring operations on Stahl, combining Tiger‑tec Gold coating technology with an RP4 chipbreaker for stable production. Tiger‑tec Gold coating for long edge life Optimised RP4 chipbreaker for stable chips Square 90° form for versatile turning/boring Designed for Stahl: reliable performance Consistent cutting performance for higher productivity The SCMT09T308-RP4 WPP30G insert delivers predictable tool life thanks to the Tiger‑tec Gold coating and a geometry optimised for medium to heavy cuts. The coated carbide grade provides a balanced hardness and toughness profile that reduces flank wear and extends change intervals, which supports uninterrupted production cycles. For operations on Stahl, the combination of the RP4 chipbreaker and the 7° relief angle reduces cutting forces and helps maintain dimensional consistency, leading to fewer process interruptions and a measurable improvement in throughput. Precision geometry for reliable chip control and surface quality A 0.8 mm corner radius and the Square 90° plate form create a stable cutting edge that resists chipping under variable loads. The RP4 chipbreaker is engineered to form short, controllable chips when machining typical steel grades, improving swarf evacuation and reducing rework. This geometry also contributes to a finer surface finish and repeatable tolerances, which is particularly beneficial for batches where consistent part quality matters. The T3 plate thickness enhances stiffness in the seat, reducing vibration and supporting higher metal removal rates with predictable results. Integration benefits and process support for the workshop Compatibility with standard toolholders and a well‑defined tolerance class (M) make the insert straightforward to implement in existing tooling systems. The clear designation and series classification simplify grade selection and tool planning; the WPP30G grade offers a balanced performance across a wide range of Stahl applications, minimizing inventory complexity. Combined with focused cutting data from Metav Werkzeuge, this insert enables a pragmatic, productivity‑oriented approach: fewer changeovers, consistent part quality and improved overall equipment effectiveness. For precision turning and reliable chip control in Stahl, request tailored cutting recommendations from Metav Werkzeuge or order the Walter Tools SCMT09T308‑RP4 WPP30G insert through Metav Werkzeuge for fast, efficient integration into existing tool systems Technical data Article number: SCMT09T308-RP4-WPP30G-WALTER Designation: SCMT09T308-RP4 WPP30G Series / coating technology: Tiger‑tec Gold Grade: WPP30G Shape: Square 90° Size code: 09 Thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Chipbreaker: RP4 Tolerance class: M Material group designation: P (suitable for Stahl) Numbers / Core technical data Relief angle: 7° Corner radius: 0.8 mm Size code: 09 Thickness: T3 Tolerance class: M Special features / Applications Coated carbide (Tiger‑tec Gold) RP4 chipbreaker for controlled chips Suited for machining Stahl For turning and boring applications Square 90° plate form Stable edge life and process reliability FAQ What materials is this insert suitable for? The SCMT09T308‑RP4 WPP30G insert is specified for machining Stahl; the WPP30G grade and Tiger‑tec Gold technology are optimised for typical steel cutting conditions. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this insert promotes short, manageable chips and improved swarf evacuation, which helps maintain surface quality and reduces the risk of chip interference during production. What edge geometry does the insert have? This square 90° insert features a 0.8 mm corner radius and a 7° relief angle to balance edge strength with favourable cutting forces for turning and boring. Is this insert compatible with standard toolholders? Yes, the SCMT09T308‑RP4 designation and tolerance class M ensure compatibility with common indexable insert toolholders designed for square 90° plates. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory‑new product from the stated manufacturer.
SCMT09T312-RP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and a precise 7° clearance for consistent performance in steel machining; order directly via Metav Werkzeuge or contact our consultants for tailored cutting data. SCMT09T312-RP4 WPP10G – indexable insert for drilling/reaming and turning, Walter Tools (Tiger‑tec Gold, suitable for steel) The SCMT09T312-RP4 WPP10G is a square indexable insert engineered for productive machining of steel in combined drilling/reaming and turning operations, offering a controlled chip geometry and a robust coating system. Tiger‑tec Gold coating for high wear resistance WPP10G grade tuned for steel machining RP4 chipbreaker for stable chip control 7° clearance and 1.2 mm corner radius Greater process reliability through a specialised grade and coating The combination of the WPP10G grade with the Tiger‑tec Gold coating provides a consistent cutting edge life under the temperatures typical for steel cutting. Coated carbide is designed to resist abrasive and adhesive wear, which translates into fewer tool changes and higher machine uptime. The result is improved productivity and predictable tool behaviour during longer runs or batch production, making this insert well suited for industrial turning and bore finishing tasks where cycle-time stability is essential. Controlled chip formation and surface quality for fewer reworks The integrated RP4 chipbreaker stabilises the chip flow when machining steel, reducing the likelihood of built-up edge and improving surface finish. The square 90° geometry and 1.2 mm corner radius support robust cutting edges that tolerate intermittent cuts and setup variations, while the 7° clearance angle helps avoid rubbing and reduces thermal loading on the cutting edge. These features together lower the risk of rework and help maintain consistent part tolerances in serial production. Versatile application in drilling/reaming and turning workflows Designed for combined operations, the insert’s geometry and grade enable both axial and radial cutting actions with reliable chip evacuation. The designation SCMT09T312-RP4 indicates a compact square insert with size 09 and thickness T3, making it compatible with common toolholders for drilling/reaming heads and turning toolposts. For operations focused on steel (ISO group P), the insert balances wear resistance and edge toughness, supporting stable performance across a wide range of feed and speed settings. For a consultation on cutting parameters or to discuss how the Walter Tools Tiger‑tec Gold WPP10G grade can improve your steel machining process, contact Metav Werkzeuge for expert advice and application support. Technical Data Article number: SCMT09T312-RP4-WPP10G-WALTER Designation: SCMT09T312-RP4 WPP10G Manufacturer: Walter Tools Data Free angle: 7° Corner radius: 1.2 mm Plate shape: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade: WPP10G (coated carbide, Tiger‑tec Gold) Chipbreaker: RP4 Material application: Steel (P) Suitable for drilling/reaming and turning operations FAQ What material is this insert optimised for? The SCMT09T312-RP4 WPP10G insert is optimised for steel (ISO P); the WPP10G grade and Tiger‑tec Gold coating are formulated for typical steel heat and chip conditions. What does the RP4 chipbreaker provide? The RP4 chipbreaker on the SCMT09T312-RP4 WPP10G promotes stable chip formation and evacuation in turning and bore-finishing tasks, improving surface quality and reducing built-up edge. Which geometry details influence edge strength? The square 90° plate with a 1.2 mm corner radius and a 7° clearance angle together increase edge robustness and reduce rubbing, supporting intermittent cuts and variable setups when machining steel. Is the insert suitable for combined drilling and turning setups? Yes, the SCMT09T312-RP4 WPP10G is specified for drilling/reaming and turning applications; its form and grade support axial and radial cutting actions with reliable chip control. How does the Tiger‑tec Gold series affect tool life? The Tiger‑tec Gold coating on this insert enhances wear resistance and thermal stability, which generally leads to longer and more consistent tool life in steel machining operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
SCMT09T312-RP4 WPP20G - Walter Tools
Take advantage of the Tiger·tec Gold grade and the RP4 chipbreaker for efficient, consistent steel machining; the combination of proven wear resistance and controlled chip formation supports stable production cycles. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. SCMT09T312-RP4 WPP20G – Turning insert, RP4 chipbreaker, 7° relief (Walter Tools) A SCMT09T312-RP4 WPP20G indexable turning insert designed for productive steel machining, combining the Tiger·tec Gold coating technology with an RP4 chipbreaker and a square 90° geometry for versatile finishing and semi-finishing operations. Tiger·tec Gold coated WPP20G grade RP4 chipbreaker for reliable chip control 7° relief angle for stable cutting Square 90° insert with 1.2 mm corner High-efficiency steel machining with proven wear resistance The SCMT09T312-RP4 WPP20G delivers a balance of wear resistance and toughness thanks to the Tiger·tec Gold coating and the WPP20G carbide class. This combination is engineered for steel machining (ISO group P) where thermal loads and varied chip forms occur. The result is longer tool life and fewer interruptions for index changes, which translates into measurable gains in process efficiency and predictable tool consumption. The square 90° format provides rigidity for shoulder cuts and general turning operations while the medium tolerance class contributes to reproducible performance across batches. Consistent chip control and surface quality The RP4 chipbreaker is configured for controlled chip formation in a wide range of steel grades, reducing the risk of entangling long swarf and supporting a safer, cleaner machining environment. Combined with the insert’s 7° relief, the geometry minimises rubbing and improves cutting action, which helps achieve a consistent surface finish and reduces secondary operations. For production environments where cycle time and repeatability matter, this geometry supports reliable part quality and fewer scrap incidents. Robust geometry for secure clamping and economical indexing With a 1.2 mm corner radius and a T3 plate thickness, the insert’s geometry supports stable cutting forces and good edge strength for both finishing and light semi-finishing. The square shape allows four usable cutting edges per insert, improving cost-per-edge and reducing tooling expenditure over time. The medium corner radius provides a compromise between strength and edge fineness, enabling small run-off radii while still offering robustness under interrupted cuts. Together, these features contribute to a predictable, economical turning process in industrial production. Contact Metav Werkzeuge for application trials, availability or material-specific recommendations on Walter Tools inserts — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data SKU: SCMT09T312-RP4-WPP20G-WALTER Article designation: SCMT09T312-RP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 7° Corner radius: 1.2 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold coated carbide) Chipbreaker: RP4 Material application: Steel (ISO group P) Geometry: Square insert, multi-edge indexing Typical use: Finishing and light semi-finishing in steel FAQ What steel grades is this insert suited for? The insert is designed for ISO group P — various unalloyed and alloyed steel grades — and the WPP20G grade offers a balance of wear resistance and toughness for general turning tasks. How does the RP4 chipbreaker improve production? The RP4 chipbreaker shapes chips for predictable evacuation and reduced risk of swarf-related interruptions, supporting continuous operation and improved surface consistency with the Tiger·tec Gold coating. How many usable edges does the square insert provide? The square 90° geometry provides four indexing positions per insert, which helps lower tooling cost per edge and increases uptime between insert replacements. Is the insert suitable for interrupted cuts? Yes. The 1.2 mm corner radius and T3 thickness offer edge strength that tolerates light interruptions while maintaining good surface finish potential. What is the relief angle and why does it matter? The insert features a 7° relief angle; this reduces flank contact and improves chip flow, contributing to lower cutting forces and consistent finishes during turning operations. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned here solely for explanation; there is no connection between our company and the stated manufacturers. The offered item is an original, factory-new product from the manufacturer.
SCMT110502-F55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Gold coating and the WKP35G grade for robust wear resistance and stable chip formation, together with the efficient F55 chipbreaker and square 90° geometry for consistent surface quality; order original Walter Tools inserts via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice. SCMT110502-F55 WKP35G – milling insert (F55 chipbreaker, Tiger‑tec Gold) by Walter Tools The SCMT110502-F55 WKP35G is a square 90° milling insert engineered for productive machining of steel and cast iron, combining a Tiger‑tec Gold coated grade with a chipbreaker optimised for reliable chip control and consistent surface finish. Tiger‑tec Gold coated grade WKP35G F55 chipbreaker for reliable chip control Square 90° form with 0.2 mm corner radius Optimised for steel and cast iron (P/K) Consistent cutting performance for steel and cast iron production The Tiger‑tec Gold coating in the WKP35G grade delivers enhanced wear resistance and improved thermal stability, which directly reduces flank and crater wear under the typical conditions encountered when machining steel and cast iron. Designed in accordance with ISO material groups P and K, this insert supports predictable tool life and steady productivity even in mixed-shop environments. The high‑performance coating and substrate pairing targets efficient material removal with fewer tool changes, thus lowering unplanned downtime and contributing to a smoother production flow. Geometry that stabilises chips and improves surface quality The insert’s F55 chipbreaker and square 90° form are tuned to control chip shape and evacuation, reducing the risk of built‑up edge and erratic cutting forces. The small 0.2 mm corner radius and 7° relief angle generate a balance between edge strength and cutting force moderation, which helps achieve a dependable surface finish while limiting chatter in typical milling set‑ups. The tolerance class M contributes to repeatable seating and positional accuracy in multi‑edge toolholders, supporting consistent results across batches and tool rotations. Shopfloor advantages: uptime, repeatability and application clarity Using a coated grade such as WKP35G promotes stable chip formation and longer intervals between regrinds or indexings, which reduces handling and changeover times on the shopfloor. The insert’s specification and square geometry make it compatible with common milling bodies and clamping concepts, simplifying logistics and tool management. For operators and process planners, the result is fewer adjustments, reliable cycle times and improved cost‑per‑part. If further technical clarification or application matching is required, Metav Werkzeuge offers consultation and can assist with selection for specific machine and workpiece combinations. Contact Metav Werkzeuge for application support and availability of SCMT110502‑F55 WKP35G — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCMT110502-F55-WKP35G-WALTER Designation: SCMT110502-F55 WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Core technical data Free angle: 7° Corner radius: 0.2 mm Shape: Square 90° Size code: 11 Thickness code: 05 Tolerance class: M Applications & special features Material suitability: steel (P) Material suitability: cast iron (K) Chipbreaker: F55 Execution: T Coating/grade: Tiger‑tec Gold coated carbide FAQ What materials is this insert intended for? The SCMT110502‑F55 WKP35G is specified for steel (ISO P) and cast iron (ISO K) applications and is designed to handle the typical thermal and abrasive demands of these groups. How does the WKP35G grade affect tool life? The WKP35G grade, with its Tiger‑tec Gold coating, improves wear resistance and thermal stability, which helps to extend the effective tool life of the SCMT110502‑F55 insert under standard milling conditions. Which chipbreaker should be chosen for reliable chip control? The F55 chipbreaker fitted to this insert is engineered for dependable chip formation and evacuation in a wide range of milling operations, supporting consistent cutting forces and surface finish. Is the SCMT110502‑F55 WKP35G compatible with standard milling cutters? Yes; the insert’s square 90° geometry and tolerance class M ensure secure seating and repeatable indexing in common milling cutter systems designed for SCMT‑type inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of Walter Tools.
SCMT110502-F55 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the wear‑balanced WPP35G grade for efficient, repeatable machining of Stahl; the modest 7° free rake and 0.2 mm corner radius deliver stable cutting and reduced edge chipping. Order the insert via Metav Werkzeuge or request application advice from our consultants. SCMT110502-F55 WPP35G indexable milling insert — Tiger‑tec Gold, for Stahl, 7° free rake A SCMT110502-F55 WPP35G indexable milling insert designed for productive Stahl machining, combining a robust chipbreaker with a balanced grade for general finishing and semi‑finishing applications Tiger‑tec Gold coating for long life Grade WPP35G for mixed wear resistance and toughness Chipbreaker F55 for controlled chips Square 90° form for versatile milling Consistent productivity through an optimised grade and coating The combination of the Tiger‑tec Gold coating and the WPP35G grade is engineered to deliver consistent tool life when machining Stahl. The coating reduces flank wear and improves thermal stability, while the grade balances wear resistance and toughness, making the insert suitable for the typical heat and chip characteristics of the ISO P group. The result is fewer tool changes and more predictable production cycles, which supports higher overall throughput and a more reliable process. Controlled chip formation and secure edge stability The F55 chipbreaker is designed to break and evacuate chips efficiently under moderate to demanding cutting conditions, improving surface quality and reducing recuts. The square 90° plate form and the 0.2 mm corner radius add mechanical strength at the cutting edge, lowering the risk of chipping during interrupted cuts. For shops seeking steady surface finish and reliable chip control in mixed production, this insert provides a pragmatic balance between metal removal rate and finish quality. Practical fitment and process reliability for workshop workflows Tolerance class M and the 7° free rake angle support predictable tool behaviour and stable cutting forces, which benefits fixture design and machine load planning. The insert is compatible with standard square‑seat milling toolholders that accept the SCMT form, allowing simple indexing and quick replacement. Where process consistency is essential, the insert’s combination of geometry and grade helps reduce scrap and cycle time while maintaining reproducible results across batches. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Gold inserts and to check current stock or suitable toolholder pairings Technical Data Article number: SCMT110502-F55-WPP35G-WALTER Label: Fräswendeschneidplatte SCMT110502-F55 WPP35G Walter Tools ISO designation: SCMT110502-F55 WPP35G Series: Tiger‑tec Gold Grade: WPP35G Manufacturer: Walter Tools Facts Free rake angle: 7° Corner radius: 0.2 mm Plate form: Square 90° Plate size: 11 Plate thickness: 05 Tolerance class: M Chipbreaker: F55 Special features Coating: Tiger‑tec Gold Material group: P (Stahl) Execution: T Suitable for: Stahl (ISO P group) Range: Tiger‑tec Gold series FAQ What materials is this insert intended for? The SCMT110502-F55 WPP35G insert is formulated for machining in the ISO P group, specifically Stahl, benefitting from the Tiger‑tec Gold coating and balanced WPP35G grade. Which chipbreaker does the insert use and what is it best for? The insert features the F55 chipbreaker, which offers controlled chip fragmentation and evacuation for medium to demanding cuts, aiding surface finish and process stability. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius increases edge strength for interrupted cuts and improves resistance to chipping while maintaining a good balance between finish and robustness. Is the insert suitable for standard toolholders? Yes. The SCMT form and square 90° plate form are compatible with standard indexable milling toolholders designed for this geometry, allowing straightforward replacement and indexing. What does tolerance class M mean for workshop use? Tolerance class M denotes medium dimensional tolerances that deliver reproducible seating and consistent cutting behaviour, which supports predictable cycle times in production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SCMT110502-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the WSP45G grade for versatile, long-lasting milling performance; order directly via Metav Werkzeuge or consult the team for application-specific advice. SCMT110502-F55 WSP45G milling indexable insert (Tiger·tec Gold) by Walter Tools SCMT110502-F55 WSP45G is a square 90° milling insert designed for versatile face and slot milling in steels, rostfreier Stahl and heat-resistant alloys Tiger·tec Gold coating for long tool life WSP45G grade for versatile material range 0.2 mm corner radius for fine surface finish Square 90° form for stable milling Proven wear resistance for uninterrupted production The Tiger·tec Gold coating combined with the WSP45G grade provides a balance of toughness and thermal resistance that translates into longer tool life and fewer indexings. In practice, this means more consistent cycle times and reduced tool-change frequency when machining a wide range of materials. The coated cemented carbide composition supports secure edge retention during continuous cuts, helping to maintain dimensional accuracy and surface quality over extended runs. Secure chip control and process stability Equipped with the F55 chipbreaker, the insert promotes stable chip formation across different cutting conditions, which reduces the risk of built-up edge and unpredictable chip behaviour. The chip control is particularly effective when working with steel, rostfreier Stahl and nickel-/titanium-based superalloys, where heat generation and ductile material flow can challenge the cutting edge. Stable chips contribute to safer operation, less downtime and improved repeatability in batch production. Precision geometry for consistent surface results The 0.2 mm corner radius and the Square 90° plate form deliver a predictable cutting geometry that helps achieve even surface finishes and reliable component tolerances. A 7° free angle supports controlled cutting engagement and reduces rubbing at the corner, while the tolerance class M ensures consistent manufacture of the inserts so that clamping and runout remain within expected limits. These geometric details are important for customers aiming for repeatable part quality and minimal secondary finishing. Versatile application and efficient inventory use The indexable design allows rapid rotation or replacement, reducing machine downtime and simplifying tooling logistics. With approval for groups P / M / S, the insert covers general steels, rostfreier Stahl and high-temperature alloys, offering a single-grade solution for mixed-material workshops. The combination of multi-material capability and a robust coating supports more economical tool management and a predictable process window across common milling tasks. Contact Metav Werkzeuge today for tailored application advice on the Walter Tools SCMT110502-F55 WSP45G milling insert and to discuss optimal cutting parameters for specific materials Technical Data Article number: SCMT110502-F55-WSP45G-WALTER SKU: SCMT110502-F55-WSP45G-WALTER Product: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Facts Plate size: 11 mm Corner radius: 0.2 mm Free angle: 7° Plate form: Square 90° Thickness: 0.5 mm Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSP45G (P / M / S) Chipbreaker: F55 Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suitable for? The SCMT110502-F55 WSP45G insert from Walter Tools is suitable for machining steel, rostfreier Stahl and heat-resistant superalloys (groups P / M / S). How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSP45G grade improves wear resistance and thermal stability, extending tool life and supporting consistent cycle times. Is the chip control effective for difficult-to-machine alloys? Yes, the F55 chipbreaker and the WSP45G grade enhance chip formation and control when machining ductile or heat-sensitive materials, reducing built-up edge. What geometry features support surface finish? The 0.2 mm corner radius and Square 90° form, together with a 7° free angle, provide stable cutting geometry that helps achieve consistent surface quality. Can this insert reduce tooling inventory complexity? The multi-material capability (P / M / S) and indexable format allow one insert type to serve multiple tasks, simplifying inventory and tooling planning. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Walter Tools wird ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT110502-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, precise chip control from the G55 breaker and a stable square geometry for reliable machining of steel and cast iron; order the SCMT110502-G55 WKP35G via Metav Werkzeuge or consult our specialists for application advice. SCMT110502-G55 WKP35G — indexable milling insert, Tiger·tec Gold coating, G55 chipbreaker | Walter Tools SCMT110502-G55 WKP35G is an indexable milling insert engineered for efficient machining of steel and cast iron, offering a coated grade for extended tool life and consistent surface quality. Tiger·tec Gold coating for extended tool life G55 chipbreaker for improved chip control Square 90° form with 0.2 mm corner radius 7° relief angle for secure cutting geometry Increased production consistency through advanced coating The SCMT110502-G55 WKP35G employs the Tiger·tec Gold coating on a coated carbide substrate to deliver notable wear resistance in mixed-production environments. This premium coating reduces flank and crater wear under fluctuating cutting conditions, which translates into longer tool life and fewer indexings during multi-shift operations. For procurement and process planning, the coated grade is particularly valuable where batch runs combine different steel grades and abrasive cast irons, allowing stable cutting parameters and predictable maintenance intervals. Better chip control and surface quality with G55 geometry The G55 chipbreaker is designed to manage chip form for both ISO P and K materials, improving evacuation and reducing recutting of chips. Controlled chip formation reduces thermal peaks and tool stress, which in turn supports a consistent surface finish and lowers the incidence of workpiece rework. In practical terms, the dedicated chip geometry enables higher material removal rates in roughing while still permitting fine passes for semi-finishing, making the insert a versatile choice for general milling tasks. Geometry that supports precision and process security A square 90° insert with a 0.2 mm corner radius and a 7° clearance angle provides a robust cutting edge for shoulder milling and slotting where tool stability matters. The compact radius assists in achieving fine edge definition on machined faces without compromising edge strength; the relieved geometry reduces rubbing on the flank and helps maintain consistent engagement. Dimension and form designations allow straightforward toolholder selection and predictable clamping behaviour in standard milling cutters. Economic machining and practical application notes Selecting this grade and geometry supports a favourable cost-per-part equation by extending intervals between indexings and simplifying tool inventory through broad material applicability (steel and cast iron). For process setup, consider modest depths of cut when finishing with the 0.2 mm radius to preserve surface integrity, while more aggressive parameters exploit the stability of the square form. For further advice on cutting data, toolholder compatibility or optimal feed rates, Metav Werkzeuge’s technical team can assist with parameter recommendations tailored to the machine and workpiece mix. For tailored application support or to acquire genuine Walter Tools SCMT110502-G55 WKP35G inserts, contact Metav Werkzeuge for technical guidance and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT110502-G55-WKP35G-WALTER SKU: SCMT110502-G55-WKP35G-WALTER Designation: SCMT110502-G55 Full designation: SCMT110502-G55 WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Quadrat 90° Size designation: 11 Thickness designation: 05 Tolerance class: M Special features Grade: WKP35G Series: Tiger-tec Gold Chipbreaker: G55 Material suitability: Steel (P) and Cast iron (K) Coated carbide grade FAQ Which materials are suitable for this insert? The SCMT110502-G55 WKP35G insert from Walter Tools is suitable for machining steel (ISO P) and cast iron (ISO K), reflecting the design intent of the WKP35G grade. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this Walter Tools grade improves wear resistance and heat management, extending the insert’s service life and helping to maintain consistent cutting performance. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes predictable chip control, aiding evacuation and reducing recutting, which improves surface quality and process reliability when machining P and K material groups. What advantages does the square 90° geometry offer? A square 90° form provides robust edge support for shoulder milling and stable engagement in slotting operations, while the 0.2 mm corner radius balances edge strength with the ability to achieve fine finishes. Is this insert suitable for finishing operations? Yes; with the small 0.2 mm radius and precise geometry, the SCMT110502-G55 WKP35G can be applied in finishing passes, provided cutting parameters are adapted to avoid excessive radial depth or feed which could affect surface integrity. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited for explanatory purposes only and do not indicate any affiliation. The offered item is original, factory-new merchandise from Walter Tools. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT110502-G55 WPP35G WPP35G Wendeplatten - Walter Tools
SCMT110502-G55 WPP35G – Fräswendeschneidplatte von Walter Tools Die SCMT110502-G55 WPP35G ist eine beschichtete Hartmetall-Wendeschneidplatte aus der Baureihe Tiger-tec Gold, optimiert für produktives Fräsen von Stahl in der Zerspanungstechnik Hohe Prozesssicherheit durch Tiger-tec Gold Speziell abgestimmt auf die Stahlbearbeitung Quadratische Plattenform 90° für stabile Schnitte Feiner Eckenradius 0,2 für präzise Kantenbearbeitung Materialvorsprung durch Beschichtung und Schneidstoff Die Wendeschneidplatte basiert auf beschichtetem Hartmetall, das in der Baureihe Tiger-tec Gold für verbesserte Verschleißfestigkeit sorgt. Durch die beschichtete Schneidstoffsorte WPP35G wird die Standzeit erhöht und die Spanbildung stabilisiert, was zu gleichbleibenden Ergebnissen bei der Bearbeitung von Stahl führt. Für Anwender bedeutet das weniger Werkzeugwechsel und höhere Maschinenlaufzeiten bei reproduzierbaren Oberflächenqualitäten. Effizienz und Anwendung im Produktionsprozess Mit der quadratischen Plattenform 90° und dem Freiwinkel 7° bietet die Platte eine ausgewogene Kombination aus Stabilität und Zerspanleistung. Der Eckenradius 0,2 ermöglicht präzise Konturen bei gleichzeitig guter Kantenschonung. Diese Eigenschaften machen das Produkt besonders geeignet für Serien- und Schruppfräsprozesse in der Metallbearbeitung, wo Produktivität und konstante Ergebnisse im Vordergrund stehen. Zielgruppe und Einsatzempfehlung Entwickelt für Anwender in der industriellen Zerspanung, profitieren Fertigungsleitende, CAM-Programmierende und Zerspanungsfachkräfte von der robusten Leistung. Die Platte eignet sich insbesondere für Betriebe, die unlegierte und legierte Stähle verarbeiten und einen stabilen Spanfluss benötigen. Durch die Kombination aus Sortenkennzeichnung und Baureihenoptimierung lässt sich die Auswahl in Fertigungszellen vereinfachen. Verarbeitungsvorteile und Sorteigenschaften Die Sorte WPP35G steht für eine ausgewogene Mischung aus Zähigkeit und Verschleißfestigkeit; sie ist auf die typischen thermischen und mechanischen Anforderungen beim Fräsen von Stahl ausgelegt. Die Spanformer G55 unterstützen kontrollierte Spanabfuhr, wodurch Oberflächen sauberer und Werkzeugstandzeiten planbarer werden. Kurz: weniger Ausschuss, höhere Ausbeute und planbare Zerspanprozesse. Empfehlung: Für prozesssichere Stahlbearbeitung die Tiger-tec Gold Sorte WPP35G von Walter Tools einsetzen und technische Beratung per eMail an info@metav-werkzeuge.com anfordern Produktmerkmale Artikelnummer: SCMT110502-G55-WPP35G-WALTER Marke: Walter Tools Baureihe: Tiger-tec Gold Ausführung: T Fakten Plattengröße: 11 Plattendicke: 05 Freiwinkel: 7° Eckenradius: 0,2 Plattenform: Quadrat 90° Spanbrecher: G55 Besonderheiten Beschichtung: Tiger·tec Gold (beschichtetes Hartmetall) Material: P (Bearbeitung von Stahl) Toleranzklasse: M Wendeplatte Bezeichnung: SCMT110502-G55 Wendeplatte ISO Bezeichnung: SCMT110502-G55 WPP35G Sorte: WPP35G Spanformer: G55 Serie: Tiger-tec Gold FAQ Was zeichnet die Schneidstoffsorte WPP35G aus? Die Sorte WPP35G ist eine beschichtete Hartmetallsorte aus der Tiger-tec Gold Familie und kombiniert Verschleißfestigkeit mit ausreichender Zähigkeit, wodurch sie sich besonders für die Bearbeitung von Stahl mit stabiler Spanbildung eignet. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die Platte wurde speziell für die Bearbeitung von Stahl (ISO-Gruppe P) entwickelt und bietet dort optimale Resultate in Bezug auf Standzeit und Oberflächenqualität. Welche Vorteile bringt die quadratische Plattenform 90°? Die Quadratform 90° erhöht die Stabilität beim Fräsen und ermöglicht reproduzierbare Schnittbedingungen, was insbesondere in Serienfertigungen die Prozesssicherheit verbessert. Wie beeinflusst der Eckenradius 0,2 die Bearbeitung? Ein feiner Eckenradius von 0,2 sorgt für präzisere Kantenbilder bei Bauteilen und reduziert gleichzeitig das Risiko übermäßiger Belastung an der Schneidkante, was die Lebensdauer verlängert. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools ist ein Markenauftritt der Walter AG. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT110502-G55 WSP45G WSP45G Wendeplatten - Walter Tools
High-performance PVD-coated carbide for stable chip control and extended tool life, paired with a precise 0.2 mm corner radius and a 7° relief for reliable finishing and roughing operations. Benefit from the combination of the Tiger·tec Gold coating and the G55 chipbreaker for consistent results across steel and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT110502-G55 WSP45G milling indexable insert — Tiger·tec Gold, for steel, stainless and superalloys — Walter Tools SCMT110502-G55 WSP45G is a square 90° milling insert designed for high-performance machining of steels, stainless steels and heat-resistant alloys in general milling applications Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys G55 chipbreaker for stable chip control 0.2 mm corner radius for precise profiles Enhanced tool life through advanced coating and substrate The Tiger·tec Gold surface treatment is a PVD multi-layer coating applied to a coated carbide substrate to resist adhesive wear and thermal loads. This combination reduces flank wear and helps maintain a sharp cutting edge over longer cycles, which leads to fewer tool changes and improved spindle uptime. For shops aiming to increase machining consistency, the coated grade offers a tangible step up in durability without requiring process redesigns. The insert’s construction is optimised to control heat at the cutting edge while preserving edge stability for both finishing and light to moderate roughing. Stable chip formation and improved process security The G55 chipbreaker geometry is engineered for predictable chip segmentation and evacuation when machining a wide material mix. Stable chips reduce the risk of re-cutting and tool damage, translating into a steadier surface finish and fewer interruptions. The moderate 7° relief supports secure entry angles and decreases the tendency for built-up edge on stainless and tougher alloys. As a result, operators benefit from fewer unexpected tool stops and more consistent cycle times, supporting leaner production flows and higher first-pass yields. Versatile material range to reduce tool inventory Designed for groups P, M and S, the insert accommodates unalloyed and alloyed steel, stainless steel and heat-resistant superalloys/titanium. This versatility allows the same geometry and grade to be specified across several part families, simplifying tool selection and lowering the number of SKUs held in stock. The robust grade manages the typical heat and strain encountered in these materials, while the chipformer and edge preparation support controlled cutting forces, helping to avoid chatter and maintain dimensional stability. Edge geometry and component-level benefits The square 90° form with a 0.2 mm corner radius delivers accurate profile transfer and good edge reinforcement for repeated passes. The insert thickness code and shape ensure secure clamping in standard milling cutters, contributing to repeatable positioning and vibration resistance. For applications requiring precise contours or moderate shoulder milling, the geometry balances edge life and cutting precision, making it suitable for component families where both surface quality and tool economy matter. For application guidance on Walter Tools Tiger·tec Gold inserts and to discuss the best insert choice for specific materials or cutter systems, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on process parameters and suitable cutter matchings Technical Data Article number: SCMT110502-G55-WSP45G-WALTER Label: Fräswendeschneidplatte SCMT110502-G55 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Size: 11 mm Thickness code: 05 Corner radius: 0.2 mm Relief angle: 7° Shape: Square 90° Tolerance class: M SKU: SCMT110502-G55-WSP45G-WALTER Special features Tiger·tec Gold PVD coating Coated cemented carbide substrate G55 chipbreaker geometry Suitable for: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Designed for versatile milling applications FAQ What materials is this insert suitable for? The SCMT110502-G55 WSP45G insert from Walter Tools is suitable for machining steel (P), stainless steel (M) and heat-resistant superalloys/titanium (S) thanks to its Tiger·tec Gold coated carbide grade. How does the G55 chipbreaker affect machining? The G55 chipbreaker on the SCMT110502-G55 promotes reliable chip segmentation and evacuation, improving process security and surface finish in mixed-material production. What advantage does the 0.2 mm corner radius provide? A 0.2 mm corner radius balances edge strength and profile accuracy, enabling consistent contours and improved resistance to edge chipping during repeated passes. Is the coating suitable for high-temperature applications? The Tiger·tec Gold PVD coating on this Walter Tools insert increases thermal and adhesive wear resistance, making it appropriate for elevated cutting temperatures encountered in stainless and superalloy machining. Which insert geometry is recommended for finishing versus roughing? The square 90° form with a small corner radius is versatile; lighter feeds and depths favour finishing, while the robust grade and chipformer permit moderate roughing without frequent tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and product identification. There is no affiliation between Metav Werkzeuge and the trademark holders beyond the sale of original, factory-new goods of the listed manufacturer.
SCMT110502-G55W WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from the combination of a heat-resistant, coated carbide grade and precise geometry for reliable, productive machining of stainless steels and superalloys; the chipbreaker design and 7° clearance help secure stable chip formation and reduced cutting forces. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. SCMT110502-G55W WSM45X milling insert — Walter Tools, coated carbide grade for stainless & superalloys A SCMT110502-G55W WSM45X milling insert designed for productive roughing and semi-finishing of stainless steels and heat‑resistant superalloys with a focus on stable chip control and edge security WSM45X grade for stainless and superalloys Chipbreaker G55W for stable chips 7° clearance for reduced cutting forces Square 90° shape with 0.2 mm radius Consistent machining in tough materials The WSM45X grade is a coated carbide developed for materials that challenge conventional grades: stainless steels and heat‑resistant superalloys. Its composition supports stable chip formation and helps avoid built‑up edge under the thermal and mechanical loads typical for these workpiece groups. Combined with the chipbreaker G55W, the insert converts difficult cut conditions into a predictable process, improving productivity and part quality while lowering the risk of unscheduled tool changes. Geometry and edge conditions that extend tool life The insert’s square 90° geometry and a 0.2 mm corner radius provide a robust cutting edge suitable for higher depths of cut and intermittent engagement. A 7° clearance reduces rubbing on the flank face and decreases cutting forces, which together support longer tool life and reproducible surface finish. The tolerance class M and the standardised form ensure interchangeability in common toolholders and enable quick integration into established machining processes. Easy integration and reliable process performance Delivered in the Walter Tools open series, this indexable plate is designed for straightforward use in modern milling operations. The combination of the grade’s heat resistance, the G55W chipbreaker and the insert geometry permits efficient material removal rates with consistent dimensional control. For technical enquiries or to confirm suitability for a specific application, Metav Werkzeuge offers knowledgeable consultancy and data support to match cutter body, cutting parameters and cooling strategy. For applications requiring dependable chip control and edge stability in stainless steels and superalloys, consider the Walter Tools SCMT110502-G55W WSM45X insert — contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SCMT110502-G55W-WSM45X-WALTER Label: Fräswendeschneidplatte SCMT110502-G55W WSM45X Walter Tools Designation: SCMT110502-G55W WSM45X Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Chipbreaker: G55W Clearance angle: 7° Corner radius: 0.2 Plate shape: Quadrat 90° Plate size: 11 Plate thickness: 05 Tolerance class: M Material application: S / M Facts Clearance angle: 7° Corner radius: 0.2 mm Plate shape: Square 90° Plate size: 11 Thickness code: 05 Tolerance class: M Special features Coated carbide grade Optimised chip control with G55W chipbreaker Suitable for stainless steels (ISO group M) Suitable for heat‑resistant superalloys and titanium alloys (ISO group S) Walter Tools open series — industrial grade FAQ Which materials is this insert intended for? This insert is specified for stainless steels and heat‑resistant superalloys; the WSM45X grade targets those ISO groups and supports secure chip formation. What chip control can be expected with the G55W breaker? The chipbreaker G55W is engineered for consistent chip segmentation and evacuation, improving process stability when using the SCMT110502-G55W WSM45X insert. What are the key geometry specifications? The insert has a square 90° shape, a 0.2 mm corner radius and a 7° clearance angle, providing a robust edge for roughing and semi‑finishing operations. Is the insert coated and what does that mean in practice? Yes — the grade is a coated carbide, which enhances heat resistance and edge life during machining of demanding materials such as those in ISO groups M and S. How does the tolerance class affect toolholders? Tolerance class M ensures compatibility with standard toolholders and supports repeatable seating and positioning of the insert in milling cutters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SCMT110502-G55W WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold combination and the WSP45G grade for consistent chip control and extended edge life; the insert’s 7° clearance and 0.2 mm corner radius deliver predictable surface quality and reduced rework. Order the SCMT110502-G55W WSP45G insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT110502-G55W WSP45G milling insert — Tiger·tec Gold PVD-coated carbide, 7° clearance — Walter Tools The SCMT110502-G55W WSP45G is a square milling insert designed for reliable finishing and semi-finishing applications in steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating Versatile for steel, stainless and superalloys 7° clearance for stable cutting 0.2 mm corner radius for high-quality surfaces Optimised wear behaviour for continuous production The Tiger·tec Gold grade WSP45G provides a balance of toughness and wear resistance that reduces unplanned tool changes and supports steady production rhythms. As a PVD-coated carbide grade, this insert is focused on secure chip formation and edge stability when machining steels and more demanding alloys. The result is fewer interruptions for tool replacement and improved component repeatability, which benefits throughput and process reliability. Cutting geometry that ensures surface consistency A square 90° form with a 0.2 mm corner radius and 7° clearance gives a predictable engagement with the workpiece and helps avoid rubbing or accelerated flank wear. The G55W chipbreaker is engineered to control chip shape under varying depths of cut and feed rates, lowering the risk of built-up edge and supporting consistent surface finish. These geometric choices translate into dependable machining results with reduced need for secondary finishing. Application scope and practical guidance for workshop use The insert is specified for the ISO groups P / M / S, meaning suitability for unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys or titanium-grade materials. The designation includes a tolerance class M, and the insert is supplied in size 11 with thickness 05, making it appropriate for a variety of milling toolholders that accept SCMT-style plates. For customers seeking a balance between productivity and tool life, the combination of grade and chip control supports efficient material removal and reliable surface quality. For application advice on the Walter Tools Tiger·tec Gold insert contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SCMT110502-G55W-WSP45G-WALTER Name: Fräswendeschneidplatte SCMT110502-G55W WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Core dimensions Plate size: 11 Thickness: 05 Corner radius: 0.2 Clearance angle: 7° Tolerance class: M Materials & features Grade: WSP45G (Tiger·tec Gold) Coating: coated carbide (PVD) Shape: Square 90° Chipbreaker: G55W Application groups: P / M / S (steel, stainless steel, heat-resistant alloys) FAQ What materials is this insert suitable for? The SCMT110502-G55W WSP45G insert is designed for ISO groups P / M / S, which covers unalloyed and alloyed steel, stainless steel and heat-resistant superalloys including titanium grades. How does the G55W chipbreaker affect machining? The G55W chipbreaker on the WSP45G grade promotes controlled chip formation and reduces the likelihood of built-up edge, improving surface finish and process stability when machining challenging materials. Which toolholders accept this insert form? The SCMT format and square 90° form are compatible with standard toolholders designed for SCMT-style plates; ensure the holder accepts size 11 and thickness 05 inserts. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius balances strength and surface quality, allowing fine profiles and good edge life while minimising cutting forces for finishing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SCMT120404-FM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of the combination of durable edge performance, reliable Tiger·tec Silver coating and precise geometry to maintain stable production when machining stainless steel and heat-resistant alloys; order the SCMT120404-FM4 WSM20S turning insert directly via Metav Werkzeuge or consult the team for tailored cutting data. SCMT120404-FM4 WSM20S turning insert — Square 90° form, FM4 chipbreaker (Walter Tools) The SCMT120404-FM4 WSM20S is a square 90° turning insert engineered for medium to heavy interrupted machining and specifically suited to stainless steel and heat-resistant superalloys, offering stable edge life under thermal load. Tiger·tec Silver coating for edge security WSM20S grade for stainless steel and superalloys FM4 chipbreaker for stable chip control Square 90° form with 0.4 mm corner radius Durable coating and grade for consistent edge life The combination of the Tiger·tec Silver coating and the WSM20S grade delivers improved thermal resilience and stable chip formation, which reduces the risk of built-up edge when working with challenging materials. For machining stainless steel and nickel‑based alloys, this results in fewer insert changes, longer tool life and more consistent surface quality. The coated carbide construction supports elevated cutting conditions while helping to protect the cutting edge from abrasion and heat. Geometry that ensures predictable cutting behaviour The square 90° format with a 0.4 mm corner radius and 7° relief angle provides a robust edge that resists deformation and maintains dimensional accuracy in repetitive turning operations. The insert size of 12 mm and plate thickness 04 give a compact but strong cutting edge; this geometry supports stable cutting forces, reduces vibration and simplifies toolpath setup, so process repeatability is improved and setup time is reduced. Chip control and productivity in demanding materials The FM4 chipbreaker is designed to produce short, controllable chips under a range of cutting conditions, aiding chip evacuation and reducing the risk of re-cutting. Improved chip control contributes directly to higher machine uptime and predictable cycle times, enhancing throughput on production runs. The combination of grade and chipformer supports higher feed rates where appropriate, translating into a measurable productivity advantage in serial machining. Material range and application guidance This insert is intended for machining groups M and S according to ISO classification; in practice it is well suited to stainless steel (stainless steels) and to heat‑resistant superalloys and titanium where thermal stability and edge security are critical. When paired with appropriate cutting data and coolant strategies, the design reduces the likelihood of edge breakdown and supports consistent part quality. For bespoke applications or borderline materials, testing with representative workpieces is recommended to fine‑tune cutting parameters. Contact Metav Werkzeuge for specialised cutting data, application advice and availability for Walter Tools inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT120404-FM4-WSM20S-WALTER Designation: SCMT120404-FM4 WSM20S Manufacturer: Walter Tools Facts Size: 12 mm Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 04 Shape: Square 90° Tolerance class: M Special features Grade: WSM20S Series: Tiger·tec Silver Chipbreaker: FM4 Material groups: S / M Execution: T Coating: coated carbide Application: stainless steel; heat‑resistant superalloys and titanium FAQ Which materials is this insert suitable for? The SCMT120404-FM4 WSM20S insert from Walter Tools is designed for ISO groups M and S, making it suitable for stainless steel and heat‑resistant superalloys and titanium under appropriate cutting conditions. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker ensures compact, controlled chips and supports reliable chip evacuation, which improves process security and reduces the likelihood of chip entanglement during turning operations. What are the key geometric specifications of the insert? The insert features a square 90° form with a corner radius of 0.4 mm, a size of 12 mm, a relief angle of 7° and a plate thickness designated as 04, providing a stable cutting edge for repeatable turning. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM20S grade increases thermal and abrasive resistance, stabilising the cutting edge and extending tool life when machining challenging stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation; the offered item is an original, factory‑new product from the manufacturer Walter Tools.
SCMT120404-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an FP4 chipbreaker for reliable, cost-effective turning of steel; the square 90° format with a 0.4 mm corner radius ensures predictable edge life and repeatable part quality — order directly via Metav Werkzeuge or ask the consultants for application support. SCMT120404-FP4 WPP20G turning insert for steel – Tiger·tec Gold, FP4 | Walter Tools SCMT120404-FP4 WPP20G is a square 90° indexable turning insert designed for productive steel machining with a coated carbide grade and an optimised FP4 chipbreaker Tiger·tec Gold coated grade WPP20G Optimised FP4 chipbreaker 7° clearance for reliable cutting Square 90° insert, 0.4 mm corner radius Stable chip control for higher throughput The combination of the Tiger·tec Gold coated carbide grade and the FP4 chipbreaker delivers consistently controlled chip formation when machining steels classified under ISO P. The coating improves wear resistance, while the chipbreaker geometry guides chips away from the cutting zone to reduce interruptions. This results in steadier cutting forces and less downtime for chip clearing, which supports increased cycle times and improved process reliability in production turning operations. Geometry that protects the edge and improves finish A 7° clearance angle and a 0.4 mm corner radius balance cutting strength with surface quality: the clearance reduces rubbing on the flank face, while the corner radius provides a stronger cutting edge than an acute point, lowering the risk of edge chipping. As a consequence, dimensional repeatability improves and the need for rework is reduced. The insert’s geometry therefore supports both roughing and finishing passes when the process parameters are adapted accordingly. Standardised format for simple tool management Following the SCMT designation, the insert is supplied in a common square 90° format with a nominal size of 12 mm and a thickness corresponding to the 04 series. The standardised form factor simplifies toolholder selection and inventory management across workshops that already use SCMT inserts. Tolerance class M ensures consistent fit and orientation in compatible toolholders, helping to maintain predictable cut engagement and repeatable set-ups. Optimised for steel applications with practical benefits The WPP20G grade is tuned for machining steel and provides a balance of toughness and wear resistance appropriate for a wide range of steel types. The insert’s coated carbide construction and profile make it a practical choice for customers seeking stable performance in general-purpose turning where process security and consistent surface quality are required. For bespoke parameter recommendations or material-specific guidance, Metav Werkzeuge’s consultants can provide machining data and application advice to support integration into existing production routines. For targeted performance with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for ordering and machining advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialists are available to help match the SCMT120404-FP4 WPP20G to the application requirements. Technical data Article number: SCMT120404-FP4-WPP20G-WALTER Designation: SCMT120404-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Size: 12 mm Corner radius: 0.4 mm Relief / free angle: 7° Thickness: 4 mm Tolerance class: M Special features Grade: WPP20G Chipbreaker: FP4 Shape: square 90° Base material: coated carbide Application group: P (steel) Execution: T ISO designation: SCMT120404-FP4 FAQ What materials is this insert suitable for? The SCMT120404-FP4 WPP20G is optimised for steels (ISO group P), offering balanced wear resistance and toughness for a wide range of steel machining tasks. What benefits does the WPP20G grade provide? WPP20G, part of the Tiger·tec Gold family, is a coated carbide grade designed to improve wear resistance and process stability when turning steel, supporting longer tool life and consistent results. Which geometry and dimensions should be expected? The insert is a square 90° format with a nominal size of 12 mm, a 0.4 mm corner radius, a 7° clearance angle and a thickness corresponding to the 04 series, supplied to tolerance class M. What is the role of the FP4 chipbreaker? The FP4 chipbreaker is engineered to produce controlled chips during steel turning, promoting secure chip evacuation and stable cutting conditions to reduce interruptions and improve productivity. Is the insert compatible with standard SCMT toolholders? The SCMT120404-FP4 follows the SCMT ISO designation and is compatible with toolholders designed for SCMT-type inserts; correct holder selection and clamping are essential for repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanation and comparison. There is no affiliation between Metav Werkzeuge and the trademark owners. The item offered is an original, factory-new product from the stated manufacturer.
SCMT120404-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the insert's Tiger·tec Silver coating and WKK10S grade for consistently high wear resistance and reliable chip control when machining cast iron; order directly via Metav Werkzeuge or consult the specialists for application advice. SCMT120404-RK4 WKK10S indexable insert — for cast iron, Tiger·tec Silver | Walter Tools A SCMT120404-RK4 WKK10S indexable insert engineered for robust turning and boring of cast iron components, combining a square 90° geometry with a specialised RK4 chipbreaker for predictable machining results Tiger·tec Silver coating for high wear resistance Optimised WKK10S grade for cast iron machining Square 90° insert, 0.4 mm corner radius RK4 chipbreaker for controlled chip formation Higher throughput with a wear-resistant coating The Tiger·tec Silver coating, paired with the WKK10S grade, targets the abrasive wear typical of cast iron machining. This coated cemented carbide composition provides improved resistance to abrasive wear, which translates into longer tool life and fewer index changes on the shop floor. For operations where consistent cycle times and fewer interruptions are decisive, the insert’s coating technology helps to maintain cutting-edge integrity over extended production runs while preserving surface quality on the workpiece. Stable edge geometry for predictable performance The insert’s Square 90° form with a 0.4 mm corner radius and a 7° clearance angle establishes a robust cutting edge that tolerates interrupted cuts and variable depths of cut. This geometry delivers enhanced edge strength and reduces the risk of premature chipping in heavy-duty turning tasks. The combination of shape and clearance makes the insert suitable for face turning, shoulder cuts and general-purpose turning where a defined 90° approach is required, offering repeatable results and reduced set-up variability. Controlled chips and safer machining with RK4 The RK4 chipbreaker is designed to fragment and guide chips effectively when working with K-group materials. By promoting controlled chip formation, the breaker reduces heat concentration at the cutting edge and supports easier chip evacuation. The practical consequences are improved operator safety, fewer surface blemishes from errant chips and reduced risk of toolholder clogging. For cast iron, where brittle chip behaviour can be challenging, the RK4 design helps to stabilise cutting conditions and maintain consistent part quality. Practical compatibility and application guidance This indexable plate is coded and supplied in the SCMT format and is intended for toolholders that accept the SCMT120404-RK4 designation. The insert belongs to the Tiger·tec Silver family and is optimised specifically for cast iron (ISO group K), addressing abrasive wear and the short breaking chips typical of such materials. As a coated carbide solution from Walter Tools, the insert is aimed at workshops seeking a balance between robustness and repeatable surface finish; machine parameters should be selected according to the specific cast iron grade and the machine tool’s rigidity for optimal results. Contact Metav Werkzeuge for guidance on integrating Walter Tools Tiger·tec Silver inserts into production and for order placement — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: SCMT120404-RK4-WKK10S-WALTER Product name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte SCMT120404-RK4 WKK10S Manufacturer: Walter Tools Facts Plate size: 12 mm Corner radius: 0.4 mm Clearance angle: 7° Plate form: Square 90° Thickness code: 04 Tolerance class: M Special features Series / coating technology: Tiger·tec Silver Grade: WKK10S Chipbreaker: RK4 Material application: cast iron (K) Execution: T Designation without grade: SCMT120404-RK4 ISO designation: SCMT120404-RK4 WKK10S FAQ What materials is this insert best suited for? The SCMT120404-RK4 WKK10S insert from Walter Tools is optimised for machining cast iron (ISO group K), with a grade and coating tailored to abrasive wear and brittle chip behaviour. How does the RK4 chipbreaker improve machining? The RK4 chipbreaker on the SCMT120404-RK4 WKK10S promotes controlled chip formation, aiding chip evacuation, reducing heat at the cutting edge and improving surface consistency when turning cast iron. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, offering robust performance in interrupted cuts while maintaining a good surface quality on cast iron components. Is the insert compatible with standard SCMT toolholders? Yes — the SCMT120404-RK4 designation indicates compatibility with toolholders designed for SCMT inserts; proper clamping and seating ensure repeatable results. Does the Tiger·tec Silver coating extend tool life? The Tiger·tec Silver coating enhances resistance to abrasive wear typical of cast iron, which generally contributes to longer tool life and more consistent production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT120404-RK4 WKK20S RK4 Wendeplatten - Walter Tools
Take advantage of the combination of reliable wear resistance and precise chip control to maintain steady production when machining cast iron; order the insert through Metav Werkzeuge or consult their specialists for application advice. SCMT120404-RK4 WKK20S – Square 90° indexable insert, RK4 chipbreaker, Tiger·tec Silver, Walter Tools SCMT120404-RK4 WKK20S is a square 90° indexable insert intended for turning and drilling-related applications, optimised for abrasive cast iron machining. Tiger·tec Silver coating for high wear resistance Optimised for abrasive cast iron machining RK4 chipbreaker for controlled, short chips Square 90° form with 0.4 mm corner radius Greater tool life through a coating engineered for abrasive materials The WKK20S grade in the Tiger·tec Silver series is a coated carbide grade developed specifically for cast iron applications. Its coating provides enhanced abrasion resistance, which translates into longer tool life and fewer index changes in serial production. For sectors where interrupted cuts and brittle, breaking chips are common, this grade stabilises the machining process and reduces unplanned downtime. The use of a purpose-made grade means predictable wear behaviour and improved process reliability when machining gray and other cast irons. Reliable chip control for safer, reproducible machining Equipped with the RK4 chipbreaker, the insert delivers consistent, short chip forms that are easier to evacuate from the cutting zone. This chip control reduces the risk of tool damage and workpiece marks, making it suitable for automated setups and unmanned shifts. The square 90° geometry combined with a 0.4 mm corner radius provides a secure cutting edge for shoulder cuts and stable plunge operations, improving repeatability and surface integrity on cast iron components. Geometry and relief designed for stable cutting conditions The insert’s geometry — a square 90° form with SCMT designation — and a 7° relief angle reduce rubbing and minimise radial cutting forces during engagement. The 12 mm size and thickness code “04” signal compatibility with standard SCMT toolholders designed for heavy-duty and light-precision tasks. These geometric choices help achieve uniform load distribution on the cutting edge, which supports steady cutting behaviour across batches and contributes to consistent dimensional accuracy. Cost-efficiency through fewer tool changes and predictable performance Choosing a grade and geometry optimised for abrasive materials lowers the total cost per part: fewer index changes, less scrap from poor chip evacuation, and more predictable service intervals. The combination of coated carbide material and a robust chipbreaker reduces unplanned stoppages and streamlines shop-floor scheduling. For production environments prioritising throughput and repeatability, this insert helps keep machining cycles efficient while maintaining surface quality. For application-specific recommendations and to discuss suitable toolholder pairings for Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge — Metav Werkzeuge GmbH is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: SCMT120404-RK4-WKK20S-WALTER Designation: SCMT120404-RK4 WKK20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Size: 12 mm Thickness code: 04 Corner radius: 0.4 mm Relief angle: 7° Insert form: Square 90° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RK4 Material application: cast iron (K) ISO-compatible SCMT geometry FAQ What materials is this insert suitable for? The SCMT120404-RK4 WKK20S insert from Walter Tools is optimised for machining cast iron, with the WKK20S grade specifically formulated for abrasive cast iron conditions. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKK20S grade enhances abrasion resistance, which increases tool life and supports stable performance when machining abrasive cast iron materials. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker produces controlled, short chips that improve chip evacuation and reduce the risk of tool and workpiece damage during turning and drilling-related operations. Is the insert suitable for automated or unmanned machining? Yes, the combination of consistent chip control and a wear-resistant grade makes this insert well suited for automated processes where predictable chip formation and extended tool life are required. Which geometry and dimensions are specified for this insert? The insert follows SCMT geometry with a square 90° form, 0.4 mm corner radius and a 7° relief angle; the designated size is 12 mm. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SCMT120404-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver grade WSM20S with the RM4 chipbreaker and a compact square 90° geometry gives a balanced solution for machining stainless steel and heat‑resistant superalloys. Order the SCMT120404‑RM4 WSM20S insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT120404-RM4 WSM20S – indexable insert for drilling/boring and turning, Tiger·tec Silver, Walter Tools The SCMT120404‑RM4 WSM20S is an indexable insert designed for reliable performance when machining stainless steel and high‑temperature superalloys in drilling/boring and turning applications Tiger·tec Silver coating for enhanced wear resistance Optimised RM4 chipbreaker for secure chip control Square 90° form, 12 mm size, 0.4 mm corner radius High process stability for tough materials The combination of the WSM20S grade and the Tiger·tec Silver technology provides improved resistance to thermal and abrasive wear in demanding environments. This coated carbide grade was developed for materials that tend to form built‑up edges and generate elevated heat, notably stainless steel and heat‑resistant superalloys. The result is a more stable cutting edge, fewer unscheduled tool changes and a consistent surface quality across medium to long production runs. For manufacturing planners this translates into predictable tool life and lower process variability, supporting efficient production cycles. Consistent chip formation and safer machining The RM4 chipbreaker is configured to promote controlled chip formation under the cutting conditions typical for tough alloys. Stable chip control reduces the risk of entanglement and helps maintain uninterrupted cycle times, particularly in interrupted cuts or when facing variable material batches. In practice, this means fewer moulder stops and a lower likelihood of built‑up edge formation, which in turn preserves dimensional accuracy and surface finish. The insert’s geometry and grade work together to support secure chip evacuation even under elevated temperatures. Compact geometry for secure clamping and repeatable results The square 90° form with a 0.4 mm corner radius and a size of 12 mm offers robustness and good edge stability for general turning and boring tasks. A relief angle of 7° reduces rubbing and cutting forces while the 4 mm thickness contributes to secure seating in standard SCMT toolholders. This geometry is particularly beneficial where multiple indexing is required: the square form yields several usable cutting edges and consistent regrinding dimensions. The insert suits setups that prioritise repeatability and mechanical rigidity, enabling dependable results in serial production. Contact Metav Werkzeuge today to discuss Walter Tools' Tiger·tec Silver WSM20S inserts and arrange a tailored recommendation for stainless steel machining via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SCMT120404-RM4-WSM20S-WALTER Designation: SCMT120404-RM4 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.4 mm Size: 12 mm Thickness: 4 mm Form: Square 90° Tolerance class: M Special features Grade: WSM20S (coated carbide) Chipbreaker: RM4 Material groups: S / M Application: stainless steel and heat‑resistant superalloys Product type: Indexable insert for drilling/boring and turning FAQ Which materials is this insert suitable for? The WSM20S grade is formulated for stainless steel and heat‑resistant superalloys; the SCMT120404‑RM4 insert supports secure chip formation and edge stability in these groups. What does the RM4 chipbreaker do? The RM4 chipbreaker is designed to control chip flow, promoting short, manageable chips and reducing the risk of build‑up under high heat conditions. What are the key geometric specifications to consider? The insert features a square 90° shape, 12 mm size, 0.4 mm corner radius, 7° relief angle and 4 mm thickness for stable clamping and multiple usable edges. Can this insert be used in standard SCMT toolholders? Yes, the SCMT form corresponds to common ISO toolholders for indexable turning and boring inserts, enabling straightforward integration. How does the Tiger·tec Silver technology benefit machining? Tiger·tec Silver provides a balanced coating system that extends wear resistance and improves edge life when machining tough, heat‑generating materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are used solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SCMT120404-RM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, durable edge life and reliable chip control for consistent production results; order the insert directly via Metav Werkzeuge or consult our team for cutting-parameter recommendations. SCMT120404-RM4 WSM30S indexable turning insert — Tiger·tec Silver grade for rostfreier Stahl and superalloys, Walter Tools A SCMT120404-RM4 WSM30S indexable turning insert designed for stable machining of rostfreier Stahl and heat-resistant superalloys, optimised for demanding turning operations SCMT120404-RM4 WSM30S by Walter Tools Tiger·tec Silver coating for increased edge life RM4 chipbreaker for secure chip control Ideal for rostfreier Stahl and superalloys Reliable performance for demanding materials The WSM30S grade, part of the Tiger·tec Silver series, is a coated carbide designated for heavy-duty turning where tool life and stability matter. With the combination of the RM4 chipbreaker and a precision ground square geometry, the insert delivers consistent chip formation and predictable cutting forces when machining tough-to-cut alloys. This performance reduces downtime caused by edge instability and helps maintain steady cycle times on repetitive components. Geometry and coating designed for edge stability A low relief angle of 7° and a 0.4 mm corner radius support robust cutting edges that resist chipping under high thermal and mechanical loads. The coated carbide substrate and Tiger·tec Silver surface treatment enhance heat resistance and adhesion strength, thereby improving wear behaviour on workpieces that generate heavy heat. As a direct result, the insert supports longer tool life and fewer indexings, translating into measurable efficiency gains. Chip control and operational benefits The RM4 chipbreaker is engineered for secure chip control across a range of feeds and depths of cut typical for stainless and high-temperature alloys. Predictable chips reduce the risk of entanglement and machine stoppages and make automated and lights-out operations more reliable. Combined with the square 90° configuration, this insert provides flexible set-ups for facing and light roughing tasks while maintaining a steady surface finish. Material compatibility and machining guidance The grade covers the ISO groups M (rostfreie Stähle) and S (heat-resistant superalloys and titanium), which are prone to work‑hardening and high thermal load. In practical terms, the chemistry and coating of the grade promote stable chip formation and a resilient cutting edge when machining such materials. When selecting cutting parameters, favour moderate cutting speeds with controlled feeds to balance tool life and productivity; Metav Werkzeuge can provide application-specific recommendations if required. For machining rostfreier Stahl and superalloys with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored advice and supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: SCMT120404-RM4-WSM30S-WALTER ISO designation: SCMT120404-RM4 WSM30S Series: Tiger-tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Insert form: Square 90° Size: 12 Plate thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Material suitability: S / M Product type: indexable turning insert FAQ What materials is the insert suited for? The WSM30S grade is formulated for rostfreie Stähle (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), providing good edge stability under thermal stress. Which chipbreaker should be selected for medium‑duty turning? The RM4 chipbreaker integrated in this insert is suitable for secure chip control in a broad range of turning tasks, particularly where predictable chips and reduced entanglement are required. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating increases heat resistance and adhesion strength on the cutting edge, improving wear behaviour and extending tool life when machining difficult alloys. Is the square 90° geometry suitable for facing operations? Yes; the square 90° form with a 0.4 mm corner radius offers flexibility for facing and light roughing while maintaining a robust cutting edge. Can this insert be used for automated lights‑out machining? With stable chip formation from the RM4 chipbreaker and the thermal resilience of the Tiger·tec Silver coating, the insert supports reliable automated processes when cutting parameters are optimised. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SCMT120404-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an RP4 chipbreaker for reliable, repeatable turning of Stahl components; order the SCMT120404-RP4 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. SCMT120404-RP4 WPP10G — square turning insert for Stahl, Tiger·tec Gold by Walter Tools SCMT120404-RP4 WPP10G is a square 90° turning insert designed for robust chip control and consistent tool life in the machining of Stahl components. Square 90° insert for robust turning Tiger·tec Gold coating for extended life RP4 chipbreaker optimised for Stahl Consistent cutting performance through coating and geometry The combination of the Tiger·tec Gold coating and a coated carbide substrate provides a balance between wear resistance and toughness that benefits standard and demanding turning operations. The insert’s RP4 chipbreaker is engineered to produce predictable chip forms when machining Stahl, reducing the likelihood of built-up edge and improving surface finish. The specified corner radius 0.4 mm and 7° relief angle help maintain a stable cutting edge geometry, which supports repeatable process results across production runs. Practical benefits for workshop productivity A square 90° shape with an inscribed circle 12 mm and thickness 4 mm gives good rigidity and multiple indexable edges, translating to economical use per insert. The design supports straightforward indexing and consistent contact conditions in standard tool holders, which reduces changeover time and helps maintain cycle-time targets. Where component tolerances and surface requirements are stringent, the insert’s geometry contributes to predictable cutting forces and improved dimensional stability during turning. Application guidance and material suitability The grade WPP10G is optimised for the machining of Stahl (ISO group P) and combines wear-resistant coatings with a toughness profile suitable for a broad range of steels. For medium to high cutting speeds the coated carbide and chipformer interaction aids in controlling heat and chip evacuation. Where finishing quality is required, the insert’s chip control characteristics support smoother surfaces and fewer secondary operations, improving overall process efficiency. For process-oriented advice and rapid supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and availability Technical data SKU: SCMT120404-RP4-WPP10G-WALTER Article designation: SCMT120404-RP4 WPP10G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Tolerance class: M Facts Relief angle: 7° Corner radius: 0.4 mm Inscribed circle / size: 12 mm Plate thickness: 4 mm Geometry: Square 90° Special features Chipbreaker: RP4 Substrate: coated carbide (Tiger·tec Gold technology) Material suitability: Stahl (ISO group P) Designation without grade: SCMT120404-RP4 Full article designation: SCMT120404-RP4 WPP10G FAQ What materials is this insert intended for? The SCMT120404-RP4 WPP10G is formulated for machining Stahl (ISO P group); the Tiger·tec Gold grade targets common unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker promotes consistent chip formation for turning Stahl, improving evacuation and reducing the risk of built-up edge compared with uncontrolled chip forms. What are the key dimensional specifications to check before mounting? Confirm the inscribed circle 12 mm, thickness 4 mm and corner radius 0.4 mm to ensure correct seating and edge engagement in the intended tool holder. Is this insert suitable for finishing operations? Yes; with its fine 0.4 mm corner radius and controlled chip formation, the insert supports improved surface integrity and is appropriate for many finishing passes in Stahl machining. How many usable edges are available on the insert? The square 90° geometry provides multiple indexable edges, enabling economical usage through rotation to fresh cutting edges when required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
SCMT120404-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the RP4 chipbreaker to achieve reliable chip control and prolonged tool life, optimising productivity in steel turning and boring. Order the insert directly via Metav Werkzeuge or contact their consultants for cutting data and supply options. SCMT120404-RP4 WPP20G – Boring/Turning indexable insert, Tiger·tec Gold, for steel (Walter Tools) The SCMT120404-RP4 WPP20G is a square 90° indexable insert designed for versatile boring and turning applications in steel, offering a balanced mix of wear resistance and toughness for stable, productive machining. Tiger·tec Gold coating for extended tool life Optimised RP4 chipbreaker for stable chips 0.4 mm corner radius for precise finishing Square 90° form, 12 mm size, 7° clearance High process reliability through coated carbide and chip control The SCMT120404-RP4 WPP20G combines a coated carbide substrate with the Tiger·tec Gold coating technology to resist abrasive wear while maintaining edge strength. The RP4 chipbreaker is engineered for consistent chip segmentation in ISO P applications; this reduces the risk of built-up edge and improves thermal stability during interrupted cuts. For production environments where predictable tool life and fewer tool changes reduce downtime, the insert delivers measurable gains in machining uptime and repeatability. Accurate surfaces and stronger edges for finishing passes With a 0.4 mm corner radius and square 90° geometry, the insert supports controlled cutting forces and predictable tool deflection, which contributes to improved surface finish and dimensional stability. The 7° clearance angle helps to prevent rubbing on the flank face, limiting heat generation and ensuring a sharper cutting action. These design choices make the insert suitable for both roughing and light finishing passes on unalloyed and alloyed steel, where consistent part quality is required. Practical economy and easy system integration The insert’s specification—12 mm inscribed circle with a 4.0 mm thickness and tolerance class M—matches common indexable toolholders, enabling quick index changes and minimal setup time. The WPP20G grade offers a balanced performance profile (wear resistance and toughness) that suits a wide range of steel machining tasks, reducing the need for multiple specialised grades. For job shops and production lines seeking efficient material removal with predictable consumable costs, the insert supports a cost-effective workflow while maintaining surface quality and process security. Contact Metav Werkzeuge for tailored cutting data and fast supply of Walter Tools Tiger·tec Gold inserts, including recommendations for tooling systems and insert quantities Technical Data Article number: SCMT120404-RP4-WPP20G-WALTER Designation: SCMT120404-RP4 WPP20G Product type: Boring/turning indexable insert Manufacturer: Walter Tools Facts Size: 12 mm Thickness: 4.0 mm Corner radius: 0.4 mm Clearance angle: 7° Form: Square 90° Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP4 Substrate: Coated carbide Material suitability: Steel (ISO P) Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The SCMT120404-RP4 WPP20G is specified for steel (ISO P group), covering unalloyed and alloyed steels as indicated by the WPP20G grade. Can the insert be used for both boring and turning operations? Yes, the insert is designed for combined boring and turning use; the square 90° form and RP4 chipbreaker provide versatility across a range of turning and boring applications. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and thermal stability, which extends tool life and improves process reliability for steel machining. How does the 0.4 mm corner radius affect machining results? A 0.4 mm radius balances edge strength and finishing capability, offering better surface quality while maintaining resistance to edge chipping during heavier cuts. Is the insert compatible with standard toolholders? Yes, the insert dimensions (12 mm inscribed circle, 4.0 mm thickness) and tolerance class M are compatible with common indexable toolholder systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT120404-RP4 WPP30G T Wendeplatten - Walter Tools
Take advantage of the combination of high process security, durable Tiger·tec Gold coating and precise geometry for dependable steel machining; order directly via Metav Werkzeuge or contact our technical consultants for application guidance. SCMT120404-RP4 WPP30G indexable insert for drilling/boring and turning, Tiger·tec Gold — Walter Tools The SCMT120404-RP4 WPP30G is an indexable turning and boring insert designed for productive steel machining, offering a robust coated-carbide grade for consistent edge life and reliable chip control Tiger·tec Gold coating for durable edge life Suitable for steel (P) machining 7° relief angle and 0.4 mm corner radius Square 90° form, 12 mm size Longer tool life and consistent wear performance The Tiger·tec Gold coating on this insert combines a hard, wear-resistant surface with a tough substrate to extend tool life under typical steel cutting conditions. For shops machining unalloyed and alloyed steels, the coated carbide grade delivers stable performance across a range of feeds and speeds. The grade WPP30G is formulated to handle the heat and typical chip formation when cutting steel, which reduces unplanned tool changes and supports a smoother production rhythm. This translates into fewer interruptions on the shop floor and improved overall equipment effectiveness. Predictable cutting behaviour and chip control Geometry plays a decisive role in how an insert behaves in operation. With an RP4 chipbreaker, a 7° relief angle and a 0.4 mm corner radius, this insert produces controllable chip forms and a balanced cutting edge suitable for a variety of finishing and semi-finishing passes. The square 90° form distributes cutting forces evenly, helping to maintain dimensional stability during turning and boring. These features reduce the likelihood of burr formation and improve surface quality, especially when working within the P material group for steel. Practical benefits for workshop efficiency Designed for repeatable results, the insert supports process reliability and predictable tool change cycles. The compact 12 size and specified thickness make it straightforward to integrate into common carbide toolholders, while the coated grade seeks to deliver a competitive tool life that lowers cost-per-part. For production environments where consistent results and low downtime are priorities, the insert offers a practical balance of endurance and cutting performance that helps streamline machining operations and support throughput targets. Contact Metav Werkzeuge for tailored cutting recommendations and to discuss application-specific parameters for Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT120404-RP4-WPP30G-WALTER ISO designation: SCMT120404-RP4 WPP30G Series: Tiger·tec Gold Grade: WPP30G Product type: Indexable insert for drilling/boring and turning Facts Relief angle: 7° Corner radius: 0.4 Plate form: Square 90° Plate size: 12 Thickness: 04 Tolerance class: M Special features Chipbreaker: RP4 Material classification: P (suitable for steel) Coated carbide grade (Tiger·tec Gold technology) Execution: T FAQ What materials is this insert suitable for? The SCMT120404-RP4 WPP30G is designed for the P material group, meaning it is suitable for machining unalloyed and alloyed steel. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold provides a wear-resistant surface and improved thermal stability, extending the insert's life and supporting consistent cutting performance when machining steel. Which chipbreaker is integrated and what is its effect? The RP4 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning and boring. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT120408-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, an optimised E47 chipbreaker and the square 90° form for consistent hole integrity and reduced tool changes; order the SCMT120408-E47 WPP20G directly via Metav Werkzeuge or consult our specialists for process matching. SCMT120408-E47 WPP20G Bohr-/Aufbohrwendeschneidplatte, Tiger·tec Gold for steel by Walter Tools The SCMT120408-E47 WPP20G is a square 90° indexable insert engineered for drilling and reaming in steel, offering high wear resistance and stable chip control for reliable production runs Tiger·tec Gold coating for long tool life Square 90° form for stable cutting 7° clearance angle for smooth chip flow Optimised E47 chipbreaker for steel Boost throughput with predictable tool life The combination of Tiger·tec Gold surface technology and a coated carbide substrate delivers measurable gains in cycle time and insert longevity when machining steel. The specialised coating reduces flank wear and maintains edge integrity under the thermal and mechanical loads typical of drilling operations. With an E47 chipbreaker designed specifically for continuous chip control in ferrous materials, tool changes become less frequent, which reduces unplanned downtime and increases effective machine availability. For process planners, the result is a more economical machining step that pays back through lowered tooling consumption and fewer interruptions. Secure hole quality and repeatable results A square 90° geometry and a 0.8 mm corner radius provide a rigid cutting edge and predictable engagement in the hole wall, improving axial stability and surface finish. The 7° clearance angle supports efficient chip evacuation while limiting rubbing on the flank, which helps keep hole tolerances stable across batch production. These geometric choices reduce vibration and support consistent dimensional results, making the insert suitable for operations where repeatability and hole integrity are critical, such as jig drilling or preparatory reaming before finishing passes. Practical integration for workshop efficiency Indexable format simplifies inventory and handling compared with solid drills: a small number of inserts can serve many bores before full tool replacement is required, which simplifies stockkeeping and reduces preparation time. The insert series is compatible with common Walter toolholder systems and is supplied under the Tiger·tec Gold family for straightforward sort selection. When integrating into a new toolset, specify the toolholder interface and the required insert designation to ensure correct seat and clamping. If process parameters or holder choices are unclear, Metav Werkzeuge’s technical team can advise on cutting data and holder matches to optimise results with this insert. For reliable machining in steel with Walter Tools' Tiger·tec Gold expertise, contact Metav Werkzeuge for tailored advice and application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: SCMT120408-E47-WPP20G-WALTER Designation: SCMT120408-E47 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Numeric Data Free angle: 7° Corner radius: 0.8 mm Plate size: 12 Thickness: 04 Tolerance class: M Materials / Special features Coating/grade: WPP20G (coated carbide, Tiger·tec Gold) Material application: Steel (P) Chipbreaker: E47 Shape: Square 90° Execution: T FAQ What materials is this insert suitable for? The SCMT120408-E47 WPP20G is intended primarily for steel (designation P) and is engineered to manage the heat and chip formation typical of ferrous machining. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the SCMT120408-E47 WPP20G improves wear resistance and edge stability, extending productive cutting life and reducing frequency of insert changes. Which chipbreaker is fitted and why does it matter? The insert uses an E47 chipbreaker, optimised for reliable chip control in steel, which reduces clogging and aids consistent evacuation during drilling and reaming. Can this insert be used with standard Walter holders? Yes, the insert designation SCMT120408-E47 fits common Walter toolholder families; confirm holder seat type and clamping for a secure fit. What geometric features improve hole quality? The square 90° form combined with a 0.8 mm corner radius and a 7° clearance angle enhances axial stability and supports repeatable hole tolerances. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product of Walter Tools.
SCMT120408-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust E47 chipbreaker and the square 90° geometry for dependable drilling and boring in steel — order the inserts via Metav Werkzeuge or contact our consultants for application support. SCMT120408-E47 WPP20S drilling/boring indexable insert — 7° clearance, 0.8 mm corner radius — Walter Tools The SCMT120408-E47 WPP20S is a square 90° indexable insert engineered for drilling and boring in steel, combining the Tiger·tec Silver coated grade with a chipbreaker designed for consistent chip control and stable machining. Tiger·tec Silver coated grade WPP20S Optimised chipbreaker E47 for controlled chips 90° square insert with 0.8 mm corner radius Designed for steel (ISO P) machining Proven coating and grade for longer cutting performance The Tiger·tec Silver coating together with the WPP20S grade delivers a balanced combination of wear resistance and toughness that is particularly well suited to machining in steel (ISO P). The coated carbide composition reduces flank and crater wear under the thermal loads typical of steel cutting, which translates into longer tool life and fewer insert changes during production. For operations where consistent cycle times and predictable replacement intervals matter, the metallurgical optimisation behind this grade supports a more economical and reliable process. Stable chip control and bore integrity under load A decisive benefit of this insert is the E47 chipbreaker, which is tuned to produce controlled, segmented chips during drilling and enlarging operations. Combined with the 7° free or clearance angle and the square 90° geometry, the insert promotes stable cutting forces and reduced vibration, helping to maintain roundness and surface integrity in the bore. The 0.8 mm corner radius increases edge strength for interrupted or heavy-engagement passes, lowering the risk of chipping and ensuring repeatable hole quality in demanding production runs. Practical design for workshop integration and versatile use The compact 12 size and the proven square form factor make this insert straightforward to integrate with standard toolholders used for drilling and boring operations. The insert’s specification supports the common thickness code 04 and the square 90° seating that many machining systems accept, simplifying inventory management. As a Walter Tools product from the Tiger·tec Silver series, this grade is described for a wide range of steel applications, offering dependable performance for both unalloyed and alloyed steels in batch and continuous production contexts. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver WPP20S inserts and to identify the optimal grade and toolholder configuration for your steel machining tasks — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number / SKU: SCMT120408-E47-WPP20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte SCMT120408-E47 WPP20S Walter Tools Manufacturer: Walter Tools Facts Insert size: 12 Corner radius: 0.8 mm Free/clearance angle: 7° Form: Square 90° Thickness code: 04 Tolerance class: M Special features Coating / grade: Tiger·tec Silver, WPP20S Chipbreaker: E47 Applicable material group: Steel (ISO P) Series: Tiger-tec Silver Application: drilling / boring indexable insert Execution: T FAQ What materials is this insert suitable for? The SCMT120408-E47 WPP20S is designed for steel (ISO P) applications; the WPP20S grade and Tiger·tec Silver coating address the heat and chip characteristics typical of unalloyed and alloyed steels. How does the E47 chipbreaker affect machining? The E47 chipbreaker promotes controlled chip formation during drilling and boring, reducing build-up and helping to maintain stable cutting forces and bore quality when using the SCMT120408-E47 WPP20S insert. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength for interrupted cuts and heavier engagement, improving resistance to chipping and supporting consistent hole geometry with the square 90° insert. Is this insert part of a recognised series from the manufacturer? Yes; the insert belongs to Walter Tools’ Tiger-tec Silver series and uses the WPP20S coated carbide grade for a balance of wear resistance and toughness. Which clearance angle is specified and why does it matter? The insert has a 7° clearance angle, which helps to control contact between the insert flank and the workpiece, reducing friction and improving surface finish during drilling and boring. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification purposes; there is no affiliation between our company and the trademark owners. The offered article is original, brand-new stock of the manufacturer.
SCMT120408-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life through the Tiger·tec Silver coating, secure chip control with the E47 chipbreaker and precise geometry for reliable boring operations; order the insert directly via Metav Werkzeuge or consult our technical team for application support. SCMT120408-E47 WSM20S Bohr-/Aufbohrwendeschneidplatte – Tiger·tec Silver, suitable for stainless steel machining, Walter Tools The SCMT120408-E47 WSM20S is a square 90° indexable insert for boring and counterboring, engineered for secure chip formation and stable cutting when machining stainless steels and heat‑resistant alloys. Tiger·tec Silver coating for enhanced wear resistance WSM20S grade for stainless steel and superalloys 7° clearance angle and 0.8 mm corner radius Square 90° form, chipbreaker E47 Increase productive output with stable cutting and long tool life The combination of the Tiger·tec Silver coating and the WSM20S coated carbide grade provides a tangible improvement in tool life and process stability. The advanced coating reduces flank wear and supports consistent cutting performance under thermally and mechanically demanding conditions, so less time is spent on tool changes and regrinding. For production environments where downtime directly affects throughput, this insert offers a reliable, repeatable cut that contributes to predictable cycle times and lower overall tooling costs. Confident machining of stainless steels and heat‑resistant alloys Designed for materials classified under ISO group M and S, the insert excels when facing the adhesion and heat‑related challenges of stainless steel and superalloys. The integrated E47 chipbreaker promotes reliable chip control, reducing the risk of built‑up edge and improving surface integrity. The 7° clearance angle helps to manage cutting forces and temperature at the cutting edge, resulting in a more consistent surface finish and reduced risk of workpiece deformation in thin or temperature‑sensitive components. Precise geometry for easy integration and consistent results The square 90° plate form with a 0.8 mm corner radius and designation SCMT120408‑E47 gives a predictable engagement for boring operations and straightforward indexability for multi‑edge use. The insert thickness and form factor suit standard toolholders and allow fast seat‑and‑index replacement, simplifying inventory management. Where operators or process planners require clarity, the insert’s geometry supports straightforward programming and setup, contributing to fewer start‑up iterations and a shorter path to production quality. For demanding stainless steel and heat‑resistant alloy applications, request the Walter Tools SCMT120408‑E47 WSM20S from Metav Werkzeuge or contact our advisors at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific machining conditions Technical data Article number: SCMT120408-E47-WSM20S-WALTER Designation: SCMT120408-E47 WSM20S Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.8 mm Plate size: 12 Thickness designation: 04 Tolerance class: M Design and features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: E47 Plate form: Square 90° Execution: T Material suitability: stainless steel, heat‑resistant alloys FAQ What materials is this insert suitable for? The SCMT120408‑E47 WSM20S insert is engineered for stainless steel and heat‑resistant superalloys, offering optimised chip formation and edge stability for these ISO‑classified groups. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating reduces wear and increases thermal resistance, which enhances the service life and process reliability of the insert under high temperature and adhesive wear conditions. What does the E47 chipbreaker provide in practical terms? The E47 chipbreaker delivers controlled chip formation and evacuation during boring operations, lowering the likelihood of built‑up edge and improving operator safety and surface quality. Is the insert compatible with standard square 90° toolholders? Yes, the square 90° form and SCMT120408 geometry permit use in standard holders designed for this family of indexable inserts, enabling straightforward replacement and indexing. Can this insert be used for general steel machining? The SCMT120408‑E47 WSM20S is optimised for ISO groups M and S; for general carbon or alloy steel applications, a different grade may be more suitable depending on the specific material and cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
SCMT120408-E47 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, chipbreaker E47 and a 0.8 mm corner radius for secure machining of stainless steel and heat‑resistant superalloys; order the insert directly via Metav Werkzeuge or ask our consultants for application support. SCMT120408-E47 WSM30S drilling/boring indexable insert by Walter Tools — Tiger·tec Silver coated, for stainless steel and superalloys SCMT120408-E47 WSM30S is a square 90° indexable insert designed for demanding drilling and boring operations in stainless steel and heat‑resistant superalloys Tiger·tec Silver coating for heat resistance Optimised chipbreaker E47 for stable chips 0.8 mm corner radius for edge strength Square 90° geometry for versatile clamping High‑performance cutting for demanding materials The SCMT120408-E47 WSM30S insert pairs a coated carbide substrate with the Tiger·tec Silver technology to address the particular challenges of machining stainless steel and heat‑resistant superalloys. The combination of coating and substrate promotes stable chip formation and improved thermal resistance, which reduces the risk of built‑up edge and extends effective cutting life. For production environments where consistent surface quality and repeatability matter, this series provides a reliable balance between wear resistance and edge stability. Geometry and chip control that stabilise the process This insert’s chipbreaker E47 is engineered to produce controlled, repeatable chips under interrupted or heavy cutting conditions, reducing rework and downtime. The 7° relief angle and 0.8 mm corner radius support a robust cutting edge that resists deformation at elevated temperatures. The square 90° plate form distributes cutting forces evenly and enables multiple indexings per insert, contributing to lower tooling costs per component and a predictable tool change rhythm on automated machines. Practical advantages on the shop floor With a compact plate size and the specified plate thickness, the insert contributes to rigidity in the tool assembly and stable bore guidance during drilling and boring cycles. Its suitability for both stainless steel and high‑temperature alloys means fewer insert changes across mixed batches, simplifying inventory and process planning. The coated carbide and the Tiger·tec Silver finish help maintain consistent performance across medium to high cutting speeds, supporting higher productivity without compromising component finish. Selection guidance for process security and productivity Choosing an insert involves matching grade, geometry and chip control to the component material and cycle strategy. The WSM30S grade, as used here, emphasises thermal stability and edge robustness for tough‑to‑cut materials; combining this with the chipbreaker E47 and a 0.8 mm corner radius offers a practical route to minimise vibration and chatter in deeper bores. For application optimisation, consider machining parameters, coolant strategy and clamping stiffness to fully exploit the insert’s properties while maintaining process security. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and secure optimal machining results Technical Data Article number: SCMT120408-E47-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte SCMT120408-E47 WSM30S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 12 Plate thickness: 04 Special features Grade: WSM30S Coating: Tiger·tec Silver Chipbreaker: E47 Material suitability: stainless steel, heat‑resistant superalloys (S) Product type: drilling/boring indexable insert Tolerance class: M FAQ Which materials is this insert designed for? The SCMT120408-E47 WSM30S insert is specified for stainless steel and heat‑resistant superalloys, reflecting the WSM30S grade’s focus on thermal stability and chip control. What are the key geometry features that influence performance? Key characteristics include the 7° relief angle, 0.8 mm corner radius, square 90° plate form and the chipbreaker E47, all of which support edge strength and controlled chip evacuation. Is the insert coated and what benefit does the coating bring? Yes, the insert uses Tiger·tec Silver coating on a coated carbide substrate; this enhances heat resistance and prolongs stable cutting performance in demanding materials. For which operations is this insert intended? The insert is intended for drilling and boring applications where the combination of robust geometry and the WSM30S grade deliver process security and consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned only for clarification; there is no affiliation between our company and the manufacturers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com