SCMT120408-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an RP4 chipbreaker for stable chip formation and high process reliability when machining steel; order the SCMT120408-RP4 WPP20G directly via Metav Werkzeuge or consult our advisors for application support. SCMT120408-RP4 WPP20G square indexable insert – Tiger·tec Gold coating for steel machining (ISO P) by Walter Tools SCMT120408-RP4 WPP20G is a square 90° indexable insert designed for turning and boring operations in steel, offering a Tiger·tec Gold coated carbide grade optimised for consistent performance Tiger·tec Gold coated carbide for high productivity RP4 chipbreaker for reliable chip control Square 90° geometry with 0.8 mm corner radius Designed for steel machining (ISO P) Consistent productivity through optimised grade and chip control The coated carbide grade WPP20G from the Tiger·tec Gold family delivers a robust balance between wear resistance and toughness, specifically designed for steel (ISO P) applications. The RP4 chipbreaker stabilises chip formation, reducing interruptions and helping to maintain cycle times. This combination means fewer unplanned tool changes and more predictable process windows, which in turn supports higher output and lower overall machining costs. The coating reduces flank and crater wear under the heat and pressures typical of steel turning, while the substrate provides the necessary toughness to resist edge chipping during interrupted cuts. Geometry that secures component quality and tool life A square 90° plate form with a 0.8 mm corner radius and 7° relief provides robust edge support and stable cutting behaviour. The corner radius helps distribute cutting forces and improves surface finish on standard turning operations, while the relief angle ensures acceptable clearance to avoid rubbing during engagement. These geometric decisions translate into repeatable dimensional accuracy and a reliable surface quality on finished parts. The insert’s dimensions are suitable for common toolholder systems that accept the SCMT120408 format, enabling straightforward integration into existing tool setups. Practical benefits for workshop integration and process security With tolerance class M and execution type T, the insert offers dependable fitment and repeatability. The grade and chipbreaker combination makes this insert suitable for a broad range of steel grades, from tougher machinable steels to more wear-prone alloys, improving process security across varying batch types. As an indexable insert, it supports cost-effective edge rotation and replacement strategies. For production environments seeking predictable tool life, the RP4 geometry and WPP20G performance help to reduce downtime and simplify inventory management, offering a clear route to more consistent throughput. For reliable steel turning with proven Tiger·tec Gold performance, request the Walter Tools SCMT120408-RP4 WPP20G through Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and quick delivery Technical data Article number: SCMT120408-RP4-WPP20G-WALTER Designation: SCMT120408-RP4 WPP20G Product type: Boring/turning indexable insert Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness: 04 Relief angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Tolerance class: M Special features Grade / coating: Tiger·tec Gold (WPP20G) Chipbreaker: RP4 Material group: P (steel) Execution: T Series: Tiger·tec Gold FAQ What materials is this insert suitable for? The SCMT120408-RP4 WPP20G is formulated for steel machining and is classified for ISO P applications, making it suitable for unalloyed and alloyed steels. What benefit does the RP4 chipbreaker provide? The RP4 chipbreaker on this insert improves chip control and promotes stable chip formation during turning and boring, which supports uninterrupted operation and consistent surface finishes. How do the corner radius and relief angle affect performance? A 0.8 mm corner radius provides edge strength and a better surface finish, while the 7° relief angle ensures adequate clearance to reduce rubbing and thermal build-up during cutting. Is this insert compatible with standard SCMT120408 toolholders? The designation SCMT120408 indicates the standard square insert format; compatibility depends on the toolholder accepting that insert size and clamping style. What process advantages can be expected from the Tiger·tec Gold grade? The Tiger·tec Gold grade (WPP20G) balances wear resistance and toughness for steel, offering improved tool life and process reliability in mixed production environments. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods of the manufacturer. The Walter brand is mentioned where relevant.
SCMT120408-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and a compact square form for efficient steel turning operations; order directly via Metav Werkzeuge or request technical advice from our consultants. SCMT120408-RP4 WPP30G — Square turning insert, Tiger·tec Gold, for steel SCMT120408-RP4 WPP30G is a square 90° indexable turning insert optimised for steel machining, featuring a Tiger·tec Gold coated carbide grade and an RP4 chipbreaker for stable performance. Tiger·tec Gold coated, high wear resistance RP4 chipbreaker for predictable chip control Square 90° form with 0.8 mm corner radius Designed for steel machining (ISO P) Precision and productivity from coated carbide technology The Tiger·tec Gold coating combined with the WPP30G carbide grade provides a balanced performance profile that prioritises wear resistance and consistent edge life when machining steels. Thanks to the coated substrate and modern coating layers, the insert offers improved thermal stability during continuous turning cycles, which reduces flank wear and helps maintain dimensional accuracy over longer tool life. The result is fewer tool changes and more predictable process windows on production lines that demand repeatable component tolerances. Reliable chip control and geometrical benefits for stable cutting With the RP4 chipbreaker geometry and a square 90° plate form, the insert delivers controlled chip formation across typical steel grades. The 0.8 mm corner radius and 7° clearance angle contribute to a favourable balance between edge strength and surface finish, reducing vibration tendencies at moderate cutting parameters. For workshops moving from uncoated grades to a coated solution, this indexable insert simplifies parameter transfer while enhancing surface quality and reducing rework rates. Application focus and support for machining steel Engineered primarily for ISO P materials, this insert suits unalloyed and alloyed steel applications where a combination of toughness and wear resistance is required. The design is appropriate for turning operations that prioritise stable chip control and consistent tool life rather than extreme high-speed finishing. For specific machining strategies, toolpath planning or assistance with cutting data, technical consultation is available to ensure the insert matches the workpiece material and machine capabilities. For tailored advice on integrating Walter Tools’ Tiger·tec Gold inserts into machining processes, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for availability and application support Technical Data Article number: SCMT120408-RP4-WPP30G-WALTER Designation: SCMT120408-RP4 WPP30G Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 12 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP4 Plate form: Square 90° Execution: T Material application: Steel (ISO P) FAQ What workpiece materials is this insert suitable for? The SCMT120408-RP4 WPP30G insert is designed for ISO P materials and is suitable for machining unalloyed and alloyed steel. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold on the WPP30G grade enhances wear resistance and thermal stability, which extends tool life and helps maintain consistent cutting performance in steel turning. Which chipbreaker should be chosen for general turning tasks? The RP4 chipbreaker on this insert provides predictable chip control for a wide range of steel turning operations, balancing chip evacuation and surface finish. Can this insert be used for finishing passes? The square 90° geometry with a 0.8 mm corner radius offers good edge strength for semi-finishing; for fine finishing, consider smaller radii or dedicated finishing grades. Where can technical cutting data and availability be obtained? Technical cutting data and stock information are available through Metav Werkzeuge; contact information is provided in the product description for direct assistance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SCMT120412-FP4 WPP20G Wendeplatten - Walter Tools
Benefit from a combination of high process reliability, the Tiger·tec Gold coating and precise square geometry to maintain consistent surface finish and long tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SCMT120412-FP4 WPP20G indexable turning insert for steel (P) — Walter Tools The SCMT120412-FP4 WPP20G is a square 90° indexable insert with a Tiger·tec Gold coated carbide grade, optimised for turning steel in demanding production environments. Tiger·tec Gold coated carbide grade WPP20G Optimised FP4 chipbreaker for reliable chip control Square 90° geometry with 1.2 mm corner radius Suitable for steel (ISO P) machining High productivity and cost efficiency for steel turning The combination of the WPP20G coated carbide grade and the Tiger·tec Gold technology delivers a reliable balance between wear resistance and toughness, which translates into longer tool life and fewer indexings in production. When machining steel (ISO P), the coated substrate ensures stable chip formation, reduced flank wear and a consistent surface finish, so processes run with fewer interruptions. The insert’s design supports high metal removal rates without sacrificing dimensional stability, making it a pragmatic choice for workshops seeking predictable performance and lower unit costs over many cycles. Predictable chip control and geometry that protects components Equipped with the FP4 chipbreaker, the insert produces controlled chip forms suited to a wide range of turning operations, reducing the risk of entanglement and improving evacuation. The 90° square shape and a 1.2 mm corner radius combine to offer robust edge strength for interrupted cuts while maintaining the ability to produce accurate profiles and shoulders. A 7° clearance angle helps reduce rubbing and heat build-up at the cutting edge, supporting consistent cutting forces and repeatable results. Together these features decrease set-up time and contribute to a more stable machining window on batch or continuous production. Material suitability and application guidance for reliable integration This indexable insert is specifically formulated for steel applications (ISO group P) and is optimised for the typical heat and chip behaviour of unalloyed and alloyed steels. The coated carbide construction provides a broad workpiece coverage across steels classified under ISO P, with a bias towards universal performance in the WPP20G grade. The square configuration and the thickness designation allow straightforward use in standard turning toolholders; the FP4 chipformer simplifies selection of cutting parameters by stabilising chip shape, thereby aiding coolant and insertion strategies. For best results, match insert geometry to the operation—roughing or finishing—so the intended balance of tool life and surface quality is achieved. Contact Metav Werkzeuge to specify the SCMT120412-FP4 WPP20G for production use or to request tailored cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SCMT120412-FP4-WPP20G-WALTER Article designation: SCMT120412-FP4 ISO designation: SCMT120412-FP4 WPP20G Product type: Indexable turning insert Brand: Walter Tools Core specifications Insert shape: Square 90° Corner radius: 1.2 mm Clearance angle: 7° Size designation: 12 Thickness designation: 04 Tolerance class: M Materials & special features Coating / grade: Tiger·tec Gold / WPP20G Chipbreaker: FP4 Substrate: Coated carbide Application: Steel (ISO P) Series: Tiger·tec Gold FAQ What workpiece materials suit this insert best? The SCMT120412-FP4 WPP20G insert is formulated for machining steel (ISO group P) and performs well across unalloyed and alloyed steels thanks to the WPP20G grade and Tiger·tec Gold coating. How does the FP4 chipbreaker influence machining? The FP4 chipbreaker stabilises chip formation for predictable evacuation, which reduces risk of tangling and supports continuous turning operations with consistent cutting forces. Can this insert be used for finishing operations? Yes; the combination of a 1.2 mm corner radius and the coated carbide grade permits fine finishes when appropriate cutting parameters are selected, while still offering robustness for light interrupted cuts. What are the geometric advantages of the square 90° shape? A square 90° geometry provides strong cutting edges for shoulder work and interrupted cuts, and offers four indexable edges per insert, optimising economy in series production. Is the Tiger·tec Gold coating beneficial for batch production? The Tiger·tec Gold coating enhances wear resistance and maintains edge integrity under cyclic loading, making the insert well suited to batch and continuous production where repeatable results are essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original factory-new goods of the manufacturer.
SCMT120412-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
High-performance machining of cast iron is supported by the combination of the WKK10S grade and the Tiger·tec Silver coating, delivering stable chip formation and extended tool life; the RK4 chipbreaker ensures dependable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SCMT120412-RK4 WKK10S indexable insert — turning and boring insert by Walter Tools, Tiger·tec Silver, for cast iron The SCMT120412-RK4 WKK10S is a square 90° indexable turning and boring insert designed for productive machining of cast iron, combining a robust coated-carbide grade with a chipbreaker tuned to short, brittle chips. Tiger·tec Silver coating for long tool life WKK10S grade optimised for cast iron RK4 chipbreaker for reliable chip control Square 90° form with 1.2 mm corner radius Increased productivity through coating and grade selection The combination of Tiger·tec Silver coating and the WKK10S grade provides a balance of wear resistance and toughness specifically targeted at abrasive cast-iron applications. The coated carbide substrate resists flank and crater wear, so machining cycles run longer between index changes, which reduces process interruptions and increases throughput. For production environments where repeatability matters, this composition supports a stable machining window and predictable tool life. Predictable chip control and surface integrity The RK4 chipbreaker is engineered to manage the short, often brittle chips typical of cast iron. Together with the 90° square geometry and 1.2 mm corner radius, the insert promotes consistent chip shaping and evacuation, reducing the risk of chip re-cutting and vibration. The 7° clearance contributes to a secure cutting edge engagement and helps maintain surface finish, making this insert suitable for operations requiring reliable dimensional accuracy and good workpiece appearance. Process reliability and application guidance This insert is intended for standard turning and light boring operations in cast-iron materials; the geometry and chip control provide stable chip formation and low edge fracture risk under appropriate cutting parameters. In practice, setting cutting speeds and feeds to match the workpiece grade and machine rigidity will maximise tool life and maintain consistent results. For integrators and production engineers, the insert supports a cost-effective approach to series machining where consistency and reduced secondary operations are priorities. For application support, grade selection or to specify Walter Tools Tiger·tec Silver inserts for cast-iron production runs, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMT120412-RK4-WKK10S-WALTER Designation: SCMT120412-RK4 WKK10S Series: Tiger·tec Silver Grade: WKK10S Tolerance class: M Facts Plate size: 12 mm Thickness code: 04 Clearance angle: 7° Corner radius: 1.2 mm Special features RK4 chipbreaker Square 90° plate form Coated carbide grade for cast iron Optimised for stable chip formation in brittle materials FAQ What materials is this insert suited for? The SCMT120412-RK4 WKK10S indexable insert from Walter Tools is optimised for cast iron (ISO group K) and is designed to handle the abrasive wear and short-chip behaviour typical of those materials. What benefits does the Tiger·tec Silver series provide? The Tiger·tec Silver coating on the Walter Tools insert improves wear resistance and thermal stability, which contributes to longer tool life and more consistent performance in series production. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker on this turning insert promotes reliable chip control, producing short, controlled chips that reduce re-cutting and help maintain surface finish during turning and boring operations. Which insert geometry should be expected and what does it mean for setup? The insert features a 90° square form with a 1.2 mm corner radius and a 7° clearance; this geometry allows secure clamping, good edge strength and smooth engagement—gear the setup to machine rigidity and select cutting parameters appropriate for cast iron. Walter Tools is a brand of Walter AG. Walter AG (brand: Walter Tools); Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation and comparison. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
SCMT120412-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with a robust RK4 chipbreaker and a 1.2 mm corner radius yields dependable chip control and extended tool life for cast-iron turning — order the SCMT120412-RK4 WKK20S directly via Metav Werkzeuge or consult the team for tailored recommendations. SCMT120412-RK4 WKK20S — Indexable Turning Insert (Square 90°, Tiger·tec Silver) by Walter Tools The SCMT120412-RK4 WKK20S is a square indexable turning insert designed for efficient machining of cast iron components in production and job‑shop environments. Tiger·tec Silver coating for heavy-duty use Optimised for cast iron (K) RK4 chipbreaker for stable chip control Square 90° insert with 1.2 mm corner radius High metal‑removal reliability for cast iron turning The combination of the Tiger·tec Silver coating and the WKK20S grade creates a coated carbide cutting edge tailored to the abrasiveness and short, broken chips typical of cast iron. Coatings of this type reduce flank wear and thermal degradation, which translates into longer tool life and fewer insert changes on the shop floor. The result is a measurable improvement in process stability and less unplanned downtime, supporting continuous production and predictable batch output. Consistent chip formation and surface quality The dedicated RK4 chipbreaker together with a 1.2 mm corner radius and 7° clearance produces compact, predictable chips while preserving edge strength. A square, 90° profile gives geometric stability for moderate to heavy cuts and simplifies toolholder selection. These geometric choices balance cutting forces and surface finish: the corner radius supports a robust cutting edge for longer life, while the chipformer reduces built-up edge and improves swarf evacuation during interrupted cuts. Production advantages and tool management benefits Adopting this insert in a turning cell brings practical gains: fewer indexings because of improved wear resistance, simpler inventory management through a widely used ISO designation, and consistent part quality across shifts. The insert’s form factor and coating make it suitable for repeatable results in serial production or small-batch manufacturing where cast iron components demand both economy and reliability. Technical teams benefit from predictable tool life and clearer reconditioning intervals, aiding cost control and throughput. For application advice or to source Walter Tools inserts like the SCMT120412-RK4 WKK20S, contact Metav Werkzeuge for expert guidance and rapid supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data SKU: SCMT120412-RK4-WKK20S-WALTER Designation: SCMT120412-RK4 WKK20S Product type: Indexable turning insert / cutting insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Facts Clearance angle: 7° Corner radius: 1.2 mm Insert size: 12 mm Plate form: Square 90° Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Schneidstoffklasse: coated carbide Chipbreaker: RK4 Application: cast iron (K) Sort: WKK20S Stable chip control and enhanced wear resistance FAQ What materials is this insert intended for? The SCMT120412-RK4 WKK20S is optimised for machining cast iron (designated K) and its abrasive, short‑chip behaviour. What does the WKK20S grade offer? WKK20S, in the Tiger·tec Silver family, provides a coated‑carbide balance between wear resistance and toughness for reliable performance on cast iron. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker produces compact chips and improves evacuation, reducing the risk of entanglement and supporting stable cutting under interrupted conditions. Will the 1.2 mm corner radius affect surface finish? A 1.2 mm radius increases edge strength and tool life; it typically delivers a robust finish suitable for many turning operations while tolerating higher cutting forces. Is this insert compatible with standard toolholders? The insert uses a common ISO form (SCMT120412‑RK4) and will fit toolholders designed for square 90° inserts with the matching clamping system. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original factory‑new product of the manufacturer.
SCMT120412-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating, a robust RM4 chipbreaker and a precise 1.2 mm corner radius to maintain stable cutting edges and consistent productivity in stainless steel turning operations. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice and delivery details. SCMT120412-RM4 WMP20G — Square Turning Insert for Stainless Steel, Tiger‑tec Gold (Walter Tools) SCMT120412-RM4 WMP20G is a square, 90° turning insert designed for medium to heavy duty machining of stainless steels in demanding production environments Square 90° shape for stable cutting Tiger‑tec Gold coating for extended edge life Corner radius 1.2 mm for robust part finish Chipbreaker RM4 for controlled chip formation Maximise process efficiency with a coated grade optimised for stainless steel The combination of the WMP20G grade and Tiger‑tec Gold coating delivers a reliable cutting-edge performance under the heat and adhesion challenges typical of stainless steel (ISO M) machining. The coated carbide composition reduces tool wear and supports stable chip formation, which in turn lowers the frequency of tool changes and contributes to higher mean time between interventions. The result is a measurable improvement in cycle consistency and a more predictable production flow. Consistent surface quality and tool stability for demanding operations The square 90° insert geometry, together with a 1.2 mm corner radius, provides mechanical strength at the cutting edge and helps to absorb intermittent cutting forces. The RM4 chipbreaker is shaped for controlled chip segmentation in tougher stainless grades, reducing the risk of built-up edge and enhancing surface finishes. For shops requiring repeatable part quality, these features translate into reduced rework and better dimensional consistency. Practical handling and application benefits for the workshop Featuring a clearance angle of 7° and a nominal inscribed circle of 12 mm, this insert fits standard toolholders for SCMT-style tooling and is straightforward to seat and clamp. The design supports secure seating and repeatable indexation, which simplifies tool management and reduces set-up time. As a coated carbide insert in the Tiger‑tec Gold family, it is suited to a broad range of stainless steel operations from semifinishing to more robust turning tasks. Contact Metav Werkzeuge for tailored application support on Walter Tools SCMT120412-RM4 WMP20G inserts and to arrange supply or technical consultation: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: SCMT120412-RM4-WMP20G-WALTER Designation: SCMT120412-RM4 WMP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core data Inscribed circle / size: 12 mm Thickness: 4 mm Corner radius: 1.2 mm Clearance angle: 7° Chipbreaker: RM4 Special features Grade: WMP20G (coated carbide) Suitable for: stainless steel (ISO M) Plate form: square 90° Application: medium to robust cutting conditions FAQ What materials is this insert suitable for? The SCMT120412-RM4 WMP20G insert is specified for stainless steel (ISO M) applications and is designed to handle the adhesion and heat characteristics of those alloys. How does the Tiger‑tec Gold coating benefit tool life? The Tiger‑tec Gold coating on the WMP20G grade improves thermal resistance and wear behaviour, resulting in longer edge life and more consistent performance in demanding stainless steel turning. What is the purpose of the RM4 chipbreaker? The RM4 chipbreaker controls chip formation and segmentation during turning, reducing the risk of built-up edge and improving surface finish when machining tougher stainless alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SCMT120412-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust RM4 chipbreaker and a 1.2 mm corner radius for reliable stainless steel turning and boring. Order the SCMT120412-RM4 WMP20S directly via Metav Werkzeuge or consult our team for application support. SCMT120412-RM4 WMP20S – square 90° turning and drilling indexable insert by Walter Tools (Tiger·tec Silver, for stainless steel) SCMT120412-RM4 WMP20S is a square 90° indexable insert designed for turning and drilling operations in stainless steels under moderate to robust cutting conditions. Tiger·tec Silver coating for increased wear resistance RM4 chipbreaker for secure chip control 1.2 mm corner radius for edge strength Square 90° form for versatile clamping Consistent performance on stainless steels The insert is produced in the WMP20S grade and benefits from the Tiger·tec Silver coating technology, specifically developed to improve wear resistance and to promote stable cutting in tough materials. This combination reduces the risk of edge build-up and supports a more predictable tool life when machining stainless steel (ISO group M). The result is fewer interruptions for tool changes and a steadier production output, which directly supports efficiency targets on batch and continuous production runs. Geometry tuned for repeatable results A square 90° plate shape combined with a 1.2 mm corner radius and a 7° clearance angle provides a robust cutting edge that tolerates moderate interruptions and delivers a consistent machined surface. The RM4 chipbreaker is designed to control chip form during turning and boring, which simplifies process set-up and reduces the likelihood of rework. These geometric choices offer a balance between edge strength and finish quality, making the insert suitable for applications where both tool life and dimensional reliability matter. Productivity advantages for machine shops The SCMT120412-RM4 WMP20S supports higher machine uptime through steady wear behaviour and predictable chip evacuation. The coated carbide grade is engineered for a broad range of stainless-steel applications, allowing fewer insert variants to cover multiple tasks. This consolidation lowers inventory complexity and contributes to an improved cost-per-component ratio in production environments. The insert’s design also aids repeatable set-up, shortening preparatory times between jobs. Practical compatibility and handling The insert’s designation reflects common ISO-style dimensions and mounting practices, so it is compatible with holders made for square 90° turning and boring inserts in the same size class. The compact plate size and standard hole/seat geometry (SCMT120412-RM4 format) allow quick indexing and replacement without extensive rework of tool assemblies. For operations requiring secure chip control and a robust edge for stainless steel turning, this insert is a practical choice that integrates readily into existing tooling systems. For application advice, availability or to discuss suitable holders for Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation Technical data Article number: SCMT120412-RM4-WMP20S-WALTER Designation: SCMT120412-RM4 WMP20S Brand: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Core data Shape: Square 90° Corner radius: 1.2 mm Clearance angle: 7° Insert size: 12 Thickness code: 04 Chipbreaker: RM4 Special features Coating technology: Tiger·tec Silver Intended material group: stainless steel (ISO M) Product type: drill/boring and turning indexable insert Execution: T (format code) Tolerance class: M FAQ What materials is this insert suitable for? The SCMT120412-RM4 WMP20S is specified for stainless steel (ISO group M) applications and is engineered to handle the toughness and heat characteristics typical of these alloys. How does the RM4 chipbreaker influence machining? The RM4 chipbreaker on the SCMT120412-RM4 WMP20S promotes secure chip formation and controlled evacuation, improving process stability during turning and boring in stainless steels. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver increases wear resistance and edge life for the WMP20S grade, contributing to more consistent cutting performance and reduced insert changes in production. Is the insert compatible with standard SCMT toolholders? Yes. The SCMT120412-RM4 format aligns with standard holders for square 90° inserts of this size class, facilitating quick indexing and replacement. Why choose a 1.2 mm corner radius for stainless steel? A 1.2 mm corner radius delivers enhanced edge strength and better resistance to chipping, which is beneficial when machining materials that tend to work-harden, such as many stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the stated manufacturer.
SCMT120412-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Benefit from Walter Tools' proven Tiger‑tec Silver coating and the RM4 chipbreaker for secure chip control and extended tool life when machining demanding materials; the compact square 90° geometry with a 1.2 mm corner radius ensures reproducible surface quality and robust edge stability. Order or request advice via Metav Werkzeuge for a seamless production setup. SCMT120412‑RM4 WSM20S indexable insert (square 90°, Tiger‑tec Silver) — Walter Tools The SCMT120412‑RM4 WSM20S is a square 90° indexable turning and boring insert optimised for machining rostfreier Stahl and heat‑resistant superalloys in demanding industrial applications. Tiger‑tec Silver coated grade WSM20S Optimised RM4 chipbreaker for stable chips 7° approach angle for secure engagement Square 90° insert with 1.2 mm corner radius Reliable cutting performance on rostfreier Stahl and superalloys The combination of the Tiger‑tec Silver coating and the WSM20S grade offers high thermal stability and improved wear resistance when machining rostfreier Stahl or nickel‑based alloys. The coating reduces tool‑workpiece adhesion and supports secure chip formation under elevated temperatures; the result is a more consistent cutting edge and fewer unexpected interruptions. The built‑in RM4 chipbreaker helps to control chip flow and reduce the risk of built‑up edge, which translates into longer tooling intervals and fewer changeovers on the shop floor. Geometry that delivers repeatable surface quality and edge life Designed with a 7° relief/approach angle and a 1.2 mm corner radius, the insert provides a balance between strength and finish: the larger corner radius distributes cutting forces to improve edge stability, while the specified approach angle reduces chatter during plunging and facing. The square 90° shape and 12 mm size give multiple indexable cutting edges per insert, aiding process economy and simple tool management. These geometric choices support predictable tool behaviour, making cycle times and surface finish more reproducible across production batches. Ready for integration into standard toolholders and production workflows Identified by the ISO designation SCMT120412‑RM4, this insert fits conventional clamping systems and is straightforward to implement in existing turning and boring operations. The combination of a robust grade and a controlled chipbreaker makes it suitable for serial production where downtime minimisation and edge reliability are priorities. For customers seeking to optimise cutting parameters or confirm holder compatibility, Walter Tools inserts are supported by established process knowledge and can be specified to match machining strategies for rostfreier Stahl and high‑temperature alloys. For tailored recommendations on cutting data or to arrange supply of Walter Tools inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to receive expert application advice and rapid fulfilment. Technical Data SKU: SCMT120412-RM4-WSM20S-WALTER Article number: SCMT120412-RM4 Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Insert size: 12 Corner radius: 1.2 mm Relief/approach angle: 7° Plate thickness: 04 Tolerance class: M Special features Grade: WSM20S Series / coating: Tiger‑tec Silver Chipbreaker: RM4 Plate form: Quadrat 90° Material designation: S / M Suitable for rostfreier Stahl FAQ What materials is the insert suitable for? The SCMT120412‑RM4 WSM20S is specified for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S) and is optimised to maintain edge stability under the high temperatures typical of those materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes short, controllable chips and reduces the chance of built‑up edge, improving surface finish and making chip evacuation more reliable when using the SCMT120412‑RM4 WSM20S insert. Is this insert compatible with standard toolholders? Yes; the ISO designation SCMT120412‑RM4 indicates compatibility with conventional indexable turning and boring toolholders designed for square 90° inserts of this size. What are the intended benefits of the Tiger‑tec Silver coating? The Tiger‑tec Silver coating on the WSM20S grade enhances thermal resistance and wear performance, helping to extend tool life and maintain consistent cutting behaviour during serial machining of rostfreier Stahl. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT120412-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Benefit from a stable cutting edge and secure chip control when machining demanding materials: the combination of the Tiger·tec Silver grade and the RM4 chipbreaker yields reproducible performance and extended tool life. Order genuine Walter Tools inserts or consult Metav Werkzeuge for application support. SCMT120412-RM4 WSM30S – Indexable turning insert (Square 90°, Tiger·tec Silver) by Walter Tools A SCMT120412-RM4 WSM30S indexable insert engineered for precision turning and boring of stainless steels and heat‑resistant alloys, optimised for secure chip formation and long machining cycles Tiger·tec Silver coated grade WSM30S RM4 chipbreaker for controlled chip flow 7° clearance for stable cutting geometry 1.2 mm corner radius, square 90° insert Reliable chip control for difficult-to-machine materials The combination of a dedicated WSM30S grade and the RM4 chipbreaker provides consistent chip control, which reduces the risk of built-up edge and improves process stability when tackling stainless steel and high‑temperature alloys. The insert geometry directs chips away from the cutting zone, lowering the chance of re-cutting and protecting the cutting edge. For production environments this translates into fewer interruptions, steadier cycle times and a more predictable surface finish. The term “chipbreaker” denotes the groove and micro‑geometry that break and control the chips; here it is tuned for sticky, work‑hardening materials where controlled evacuation is essential. Extended tool life and constant cutting performance The Tiger·tec Silver coating technology supports higher temperatures at the cutting edge and enhances wear resistance, delivering longer service life in continuous operations. Combined with the robust corner radius of 1.2 mm and a 7° clearance angle, the insert resists edge chipping and maintains dimensional stability over extended runs. This is especially advantageous for shops seeking to reduce tool changes and increase machine uptime. The result is a measurable improvement in productivity and lower effective tool cost per component, as the insert sustains cutting forces and surface quality under demanding conditions. Precision fit and straightforward machine integration The SCMT120412-RM4 format – a square 90° insert with a nominal 12 mm size and a compact thickness – fits standard toolholders for turning and cutting‑off operations, enabling quick integration into existing setups without extensive fixture changes. The tolerance class M ensures consistent geometry batch to batch, supporting repeatable part quality. Where process documentation is required, this insert’s specification aids in setting reliable cutting parameters for stainless steels and superalloys, and the clear designation simplifies procurement and tool management in a production setting. Contact Metav Werkzeuge for tailored application advice and to secure original Walter Tools Tiger·tec Silver inserts for reliable, long‑run machining results Technical data Article number: SCMT120412-RM4-WSM30S-WALTER Designation: SCMT120412-RM4 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Facts Plate size: 12 mm Corner radius: 1.2 mm Clearance angle: 7° Plate form: Square 90° Plate thickness: 04 Tolerance class: M Special features Chipbreaker: RM4 Material grade: S / M Application suitability: M (stainless steels), S (superalloys and titanium) Optimised for secure chip formation and stable cutting edge FAQ What materials is this insert suitable for? The SCMT120412‑RM4 WSM30S insert from Walter Tools is designed for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering thermal and edge stability for those materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this insert controls chip shape and evacuation, reducing re‑cutting and helping to prevent built‑up edge when machining sticky or work‑hardening materials. What does the Tiger·tec Silver grade offer in practice? Tiger·tec Silver coating enhances heat resistance and wear performance, which in practice means longer tool life and more consistent surface finishes during continuous or high‑temperature cutting. Can the insert be used in standard toolholders? Yes, the SCMT120412‑RM4 conforms to common square 90° insert formats and fits standard turning and boring holders that accept SCMT‑type inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. The offered item is an original, factory‑new product from the stated manufacturer.
SCMT120412-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, an optimised RP4 chipbreaker and a precise 1.2 mm corner radius for consistent, productive turning of steel components; order or request advice via Metav Werkzeuge for tailored cutting data. SCMT120412-RP4 WPP10G square insert — Tiger·tec Gold, 1.2 mm radius, Walter Tools SCMT120412-RP4 WPP10G is a square 90° turning/boring insert engineered for productive steel machining in industrial turning applications Tiger·tec Gold coating WPP10G Optimised RP4 chipbreaker 1.2 mm corner radius for repeatable accuracy 7° clearance angle for stable cutting Higher productivity through a wear-resistant grade The combination of the WPP10G grade and Tiger·tec Gold coating delivers a reliably high tool life when machining steel. The insert’s coated carbide substrate is designed for the heat and chip formation typical of steel turning; this results in fewer tool changes and longer uninterrupted runtime. The tolerance class M ensures consistent geometry batch-to-batch, which supports automated or serial machining where repeatability is essential. In practice, this means a more stable process and predictable tool-change intervals, helping to reduce overall process costs. Improved chip control and precision geometry The RP4 chipbreaker is optimised for general steel applications, producing controllable chips across a range of feeds and depths of cut. Combined with the 1.2 mm corner radius and 90° square shape, the insert provides a reliable balance between edge strength and surface finish. The 7° clearance angle reduces rubbing and heat build-up while maintaining edge support during interrupted cuts or plunge operations. For operators less familiar with chipbreaker terminology: the RP4 geometry directs and breaks chips to prevent entanglement and to protect the cutting edge, improving both component quality and machine uptime. Application guidance and production benefits Designed primarily for the machining of steel (ISO group P), this insert suits turning and boring tasks that require a durable, versatile grade rather than highly specialised micro‑geometries. The SCMT120412-RP4 designation indicates a square insert with a 12 mm plate size and a thickness designation of 04, offering a robust platform for medium-duty to demanding operations. The grade’s versatility supports a wide range of steels from less alloyed grades to tougher, more wear‑resistant alloys, enabling shops to standardise on fewer grades while maintaining process reliability. For shops seeking predictable performance and fewer tool changes, this coated insert provides an efficient baseline solution. Specify Walter Tools inserts in Tiger·tec Gold for dependable steel turning — consult Metav Werkzeuge for precise cutting data and application recommendations via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SCMT120412-RP4-WPP10G-WALTER Designation: SCMT120412-RP4 Grade: WPP10G Series: Tiger·tec Gold Numbers / Core technical data Insert size: 12 Corner radius: 1.2 mm Clearance angle: 7° Thickness designation: 04 Tolerance class: M SKU: SCMT120412-RP4-WPP10G-WALTER Designs / Special features Square 90° insert RP4 chipbreaker Coated carbide grade Suited for steel (ISO group P) Execution: T FAQ What materials is this insert suitable for? This insert is intended for machining steel (ISO group P); the WPP10G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation characteristics of steels. What advantage does the RP4 chipbreaker provide? The RP4 chipbreaker delivers controlled chip formation for a broad range of feeds and depths, improving chip evacuation and protecting the cutting edge during continuous turning operations. Is the 1.2 mm corner radius suitable for finishing? A 1.2 mm radius offers a compromise between edge strength and surface finish; it is suitable for semi-finish and general finishing applications where both durability and quality are required. How does the tolerance class M affect use? Tolerance class M indicates medium geometric tolerances, supporting stable clamping and consistent performance across series production without requiring specialised holders. Which product designation identifies this insert clearly? The SKU SCMT120412-RP4-WPP10G-WALTER and the ISO designation SCMT120412-RP4 WPP10G identify the insert, its chipbreaker and its grade for ordering and tool management Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SCMT120412-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from a combination of the Tiger·tec Gold coating, the universal WPP20G grade for steel and a precise RP4 chipbreaker for consistent chip control — ideal for improving process reliability and tool life; order the insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT120412-RP4 WPP20G indexable insert — coated carbide for steel with RP4 chipbreaker A SCMT120412-RP4 WPP20G indexable insert designed for drilling, boring and turning applications in steel where robust edge life and consistent chip control are required Tiger·tec Gold coated carbide grade WPP20G Designed for steel machining (ISO P) Square 90° form with 1.2 mm corner radius Enhanced productivity through a proven coating and grade The coated carbide WPP20G from the Tiger·tec Gold series delivers a reliable balance of wear resistance and toughness tailored to machining steel (ISO P). The grade is engineered to handle the typical heat and chip formation when cutting unalloyed and alloyed steels, reducing unexpected tool changes and downtime. By combining a wear-resistant coating with a geometry optimised for steel, the insert supports faster cycle times and predictable tool life, which in turn improves overall process stability and makes planning easier for production environments. Consistent chip formation and cutting-edge stability Built around the RP4 chipbreaker, the insert promotes short, controllable chips in many cutting conditions. The 7° clearance angle and 1.2 mm corner radius contribute to a stable cutting edge that reduces vibration and improves surface finish on machined components. This geometry helps maintain the integrity of the cutting edge under load, lowering the risk of built-up edge and providing a repeatable machining result — a clear advantage for demanding serial production or tight-tolerance operations. Practical design that simplifies tool set-up The square 90° plate form and nominal size of 12 mm make the insert straightforward to seat in common indexable holders, offering four usable cutting edges per insert and efficient tool utilisation. The tolerance class M indicates consistent dimensional accuracy for predictable clamping and runout behaviour. These design attributes reduce setup time and spare parts complexity, allowing toolrooms to keep more operations within existing fixture and holder inventories. Application advice and machining scope Assigned to ISO group P, the insert is primarily intended for machining steel; the WPP20G composition provides a balanced performance across different steel types, favouring a broad range from wear-resistant to more ductile batches. For general guidance: select moderate cutting speeds with appropriate coolant strategy for higher material removal, and use the RP4 chipformer to maintain short, segmented chips. The designation SCMT120412-RP4 WPP20G indicates the geometry and grade, facilitating straightforward replacement and tool management in production documentation. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and secure the SCMT120412-RP4 WPP20G for optimised steel machining workflows — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: SCMT120412-RP4-WPP20G-WALTER Designation: SCMT120412-RP4 WPP20G Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 1.2 mm Insert size: 12 mm Thickness code: 04 Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold) Chipbreaker: RP4 Shape: Square 90° Material application: Steel (ISO P) Series: Tiger·tec Gold FAQ What materials is this insert suitable for? The SCMT120412-RP4 WPP20G is designed primarily for machining steel (ISO P); the WPP20G grade adapts to typical steel heat and chip formation. How does the RP4 chipbreaker affect performance? The RP4 chipbreaker delivers controlled, short chips in a wide range of steel applications, improving chip evacuation and surface finish with the SCMT120412-RP4 WPP20G insert. Which features support long tool life? The Tiger·tec Gold coating and the balanced WPP20G grade contribute to wear resistance and edge stability, extending the service life of the insert under normal cutting conditions. Is the square form suitable for roughing and finishing? Yes — the square 90° form and 1.2 mm corner radius provide robustness for roughing while still allowing acceptable finishing capability when parameters are adjusted. What does tolerance class M indicate for shop-floor use? Tolerance class M signifies consistent dimensional accuracy for reliable seating in holders and predictable runout behaviour, simplifying tool setup and repeatability Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not imply any association with our company. The offered item is an original, factory-new product of the manufacturer.
SCMT120412-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the Tiger‑tec Gold WPP30G grade together with the RP4 chipbreaker and a 1.2 mm corner radius to keep turning and boring processes on steel highly productive and consistent; order through Metav Werkzeuge or consult their technical advisors for application guidance. SCMT120412-RP4 SCMT120412-RP4 WPP30G Twist-drill/turning insert for steel — Walter Tools The SCMT120412-RP4 WPP30G is a square 90° indexable insert engineered for productive steel machining, combining a Tiger‑tec Gold coating with an RP4 chipbreaker for stable chip formation and reliable tool life. Tiger‑tec Gold coating for high wear resistance Optimised RP4 chipbreaker for stable chips Square 90° plate with 1.2 mm corner radius 7° clearance angle for reliable cutting Increased productivity through advanced coating and grade The Tiger‑tec Gold coating paired with the WPP30G grade provides a measurable increase in wear resistance and thermal stability when machining steel. The coated carbide construction reduces flank wear at elevated cutting temperatures, which extends effective edge life and decreases tool-change frequency. For production environments where consistent cycle times and predictable regrind intervals matter, this coated grade supports stable machining with fewer interruptions. The combination of coating and grade renders the insert especially suitable for medium to heavy interrupted cuts where thermal loads and abrasive wear are typical. Better chip control and surface integrity from geometry The RP4 chipbreaker and the square 90° plate form with a 1.2 mm corner radius are designed to control chip form and influence cutting forces. The chipbreaker guides chip flow to avoid long, stringy chips and to promote short, controllable fragments, improving process safety at higher feeds. The 1.2 mm corner radius increases edge strength, contributing to improved surface finish and reduced risk of edge chipping in roughing and semi-finishing passes. Explained simply: a larger corner radius balances edge robustness and surface quality, while the RP4 geometry helps maintain consistent chip evacuation across a range of feeds. Geometry and compatibility for stable turning and boring The insert’s 7° clearance angle and the dimension set (plate size 12, thickness code 04) support predictable cutting behaviour and secure clamping in standard toolholders. The insert is offered in an execution marked T with tolerance class M, which aligns with common toolholder interfaces used in turning and boring operations. Designed primarily for steel applications, the insert integrates into established process chains and is compatible with typical CNC lathes and gang tooling setups. For integrators and production engineers, this means straightforward insertion into tool lists and uncomplicated optimisation of cutting parameters for throughput and repeatability. If further technical data or cutting parameter support is required, contact Metav Werkzeuge for detailed guidance. For high-productivity steel machining with Walter Tools, request supply of the SCMT120412-RP4 WPP30G through Metav Werkzeuge and obtain tailored application advice and availability details from their technical team. Technical data Article number / SKU: SCMT120412-RP4-WPP30G-WALTER Manufacturer: Walter Tools Product type: Twist-drill/turning insert (indexable insert) Series / Grade: Tiger‑tec Gold / WPP30G Facts Plate form: Square 90° Plate size: 12 mm Corner radius: 1.2 mm Clearance angle: 7° Thickness code: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: RP4 Material application: Steel (P) Execution: T Series description: high wear resistance, productive machining FAQ What materials is this insert intended for? The SCMT120412-RP4 WPP30G is specified for machining steel; the WPP30G grade and Tiger‑tec Gold coating are optimised for the heat and chip behaviour typical of steel turning. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this insert directs chip formation to short, controllable fragments, improving process safety and enabling higher feed rates without problematic chip entanglement. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and supports improved surface finish in roughing and semi-finishing operations while reducing the susceptibility to edge chipping. Is the insert compatible with standard toolholders? Yes; the insert’s square 90° form and tolerance class M suit common indexable-insert holders for turning and boring. The execution code and dimensions facilitate straightforward integration into typical setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and designations remain the property of their respective owners. Brand names and protected product names are used for explanatory purposes only and do not indicate any affiliation with our company. The offered item is an original, factory-new product from the manufacturer (Walter Tools).
SCMW09T304-RK6 WKK20S Wendeplatten - Walter Tools
Benefit from a cost‑effective, wear‑resistant solution that combines Walter Tools' Tiger‑tec Silver coating with an RK6 chipbreaker and a 0.4 mm corner radius for stable machining of cast iron; order directly via Metav Werkzeuge or consult their specialists for application advice. SCMW09T304-RK6 WKK20S indexable turning insert — Tiger‑tec Silver (Walter Tools) The SCMW09T304-RK6 WKK20S is an indexable turning insert optimised for productive machining of cast iron, offering a positive 7° clearance and a robust 0.4 mm corner radius for reliable edge life Tiger‑tec Silver coating for high wear resistance Optimised RK6 chipbreaker for cast iron 7° positive clearance for controlled cutting 0.4 mm corner radius for robust edge strength Consistent tool life for abrasive cast iron machining The combination of the Tiger‑tec Silver coating and the WKK20S carbide grade targets the abrasive wear typical of grey and nodular cast irons. Coated hardmetal technology reduces flank wear and extends usable life, which translates into fewer index changes and lower tooling costs over time. The insert's geometry and coating work together to manage thermal loads and abrasion; as a result, process stability is improved and cycle times remain predictable even under demanding conditions. This makes the insert particularly suited to series production where repeatability matters. Chip control and cutting stability for efficient turning A dedicated RK6 chipbreaker ensures consistent chip formation when machining cast iron materials (ISO group K). The chipbreaker design promotes short, easily evacuated chips, reducing the risk of entanglement and improving surface integrity. The 7° clearance helps maintain a controlled cutting angle that reduces cutting forces and vibration, supporting higher feed rates without sacrificing finish. These geometry choices contribute directly to greater productivity and safer machining routines in both automated and manual turning operations. Robust edge geometry for predictable performance The 0.4 mm corner radius and the square 90° platform provide a sturdy cutting edge that resists chipping during interrupted cuts or when encountering hard inclusions in castings. The square 90° shape offers multiple indexing positions per insert, enabling efficient use of the cutting material and straightforward tool handling. The T3 thickness delivers sufficient edge support for medium to heavy turning applications, helping to maintain dimensional accuracy and reducing the frequency of tool changes. Practical benefits for workshop integration Designed for straightforward implementation into standard insert holders, the insert's identification — including the ISO‑style designation — simplifies tooling choices and procurement. The coated hardmetal grade targets cast iron machining specifically, so tool path strategies and cutting data from similar materials can be adopted with minimal adjustment. Using these inserts contributes to predictable tool consumption rates and easier inventory planning, which supports more efficient production scheduling in job shops and manufacturing lines alike. For demanding cast‑iron turning applications, select the Walter Tools Tiger‑tec Silver SCMW09T304‑RK6 WKK20S inserts via Metav Werkzeuge for process reliability and tailored application support — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance. Technical data SKU: SCMW09T304-RK6-WKK20S-WALTER Designation: SCMW09T304-RK6 Grade/Sorte: WKK20S Series: Tiger‑tec Silver Manufacturer: Walter Tools Product type: indexable turning insert Facts Free angle: 7° Corner radius: 0.4 mm Insert shape: square 90° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: RK6 Material application: cast iron (ISO group K) Design: positive geometry, robust edge support FAQ What materials is this insert suitable for? The SCMW09T304‑RK6 WKK20S insert is optimised for machining cast iron (ISO group K) and is engineered to manage the abrasive wear and short, breaking chips typical of those materials. What does the WKK20S designation indicate? WKK20S denotes Walter Tools' coated hardmetal grade within the Tiger‑tec Silver family; it signifies a wear‑resistant, universal/tough variant tuned for cast iron applications. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker promotes short, controllable chips and consistent chip evacuation, which improves surface quality and reduces the risk of chip entanglement in turning operations. Why is the 0.4 mm corner radius important? A 0.4 mm corner radius increases edge strength and reduces the likelihood of chipping at the nose, enhancing stability during interrupted cuts and when encountering inclusions in cast components. Which insert geometry and clamping features should be noted? The insert is a square 90° shape with a T3 thickness and a positive 7° clearance; these features support multiple indexings and provide robust edge support for medium to heavy turning tasks. Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. The article described is an original, brand‑new product from the manufacturer.
SCMW09T308-RK6 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the RK6 chipbreaker for efficient, wear‑resistant cast‑iron turning; order direct via Metav Werkzeuge or request application advice from our technical consultants. SCMW09T308-RK6 WKK10S square 90° turning insert — Tiger·tec Silver coating, RK6 chipbreaker — Walter Tools The SCMW09T308-RK6 WKK10S is a square, coated carbide turning insert engineered for robust, high‑productivity machining of cast iron components. Tiger·tec Silver coating for long tool life Optimised RK6 chipbreaker for cast iron Square 90° form with 0.8 mm corner radius Tolerance class M and stable dimensions High‑efficiency cast‑iron turning for increased throughput The insert is built on the Tiger·tec Silver platform and graded WKK10S, a Walter Tools composition optimised for cast iron (ISO group K). The RK6 chipbreaker promotes controlled, short chip formation typical for grey and nodular cast iron, reducing interruptions and improving cycle times. As a result, the component flow becomes more predictable and tool changes are less frequent, which supports a smoother production process and measurable productivity gains. Predictable edge life and dimensional accuracy Square 90° geometry combined with a 0.8 mm corner radius and tolerance class M delivers a balance between strength and edge stability. The plate thickness T3 and the 7° clearance angle contribute to secure seating and consistent cutting conditions. These attributes translate into repeatable surface quality and fewer part reworks, enabling reliable batch production where reproducible dimensions are required. Practical selection and process integration Designed specifically for abrasive cast‑iron applications, the insert’s coated carbide grade and chipformer allow straightforward integration into common turning strategies. The designation supports both heavier roughing cuts and controlled finishing passes where edge robustness is essential. For machine setup, use the plate form Square 90° and ISO‑compatible toolholders to maintain clamping stability and benefit from consistent cut behaviour across shifts. For production queries or to secure supply of Walter Tools' SCMW09T308-RK6 WKK10S, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised application advice and ordering. Technical data Article number: SCMW09T308-RK6-WKK10S-WALTER Manufacturer: Walter Tools Product type: Turning indexable insert (Drehwendeschneidplatte) Designation: SCMW09T308-RK6 WKK10S Key dimensions and tolerances Clearance angle: 7° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Materials, series and features Series: Tiger·tec Silver Grade: WKK10S Chipbreaker: RK6 Suitable for: Cast iron (ISO group K) Coated carbide construction FAQ Which materials is this insert best suited for? The SCMW09T308-RK6 WKK10S is optimised for cast iron machining (ISO group K); the Tiger·tec Silver grade and RK6 chipbreaker are tailored to the abrasive and short‑chip characteristics of these materials. What does the RK6 chipbreaker achieve? The RK6 chipbreaker produces short, controlled chips in cast iron turning, improving chip evacuation and reducing the risk of entanglement during continuous or automated operations. What is the corner radius and when should it be used? The insert has a 0.8 mm corner radius, offering a compromise between edge strength and surface finish; it performs well in general‑purpose turning where robustness is required without sacrificing dimensional accuracy. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating enhances wear resistance and heat management, which helps to extend tool life and maintain stable cutting conditions on abrasive cast‑iron jobs. What is the SKU and who manufactures this insert? SKU SCMW09T308-RK6-WKK10S-WALTER is manufactured by Walter Tools and supplied in the SCMW09T308-RK6 WKK10S configuration for cast‑iron applications. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SCMW09T308-RK6 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, RK6 chip control and easy integration into standard turning holders for consistent, productive machining of cast iron; order the SCMW09T308-RK6 WKK20S directly via Metav Werkzeuge or ask our consultants if needed. SCMW09T308-RK6 WKK20S indexable turning insert – Tiger·tec Silver grade, RK6 chipbreaker, for cast iron SCMW09T308-RK6 WKK20S is an indexable turning insert optimised for machining cast iron components in demanding production environments. RK6 chipbreaker for consistent chip control Tiger·tec Silver coating for high wear resistance Suitable for cast iron machining applications 7° clearance angle for reliable cutting geometry Consistent performance on abrasive cast iron The combination of the RK6 chipbreaker and Tiger·tec Silver coating provides predictable cutting behaviour when working with abrasive grey and nodular cast irons. The ceramic‑enhanced coating reduces abrasive wear on the cutting edge, which translates into longer tool life and fewer interruptions for index changes. For production shops this means a measurable improvement in process stability and reduced index consumption, supporting higher throughput without compromising component quality. Reduced risk of built‑up edge and controlled chip formation The insert’s geometry—including the 7° clearance and 0.8 mm corner radius—helps maintain a stable cutting edge and promotes short, easily evacuable chips when turning cast iron. This geometry lowers the likelihood of built‑up edge formation and provides a consistent surface finish on each pass. The WKK20S grade is tuned to resist the typical abrasive wear of cast iron while retaining enough toughness to withstand intermittent cutting forces, so component tolerances are maintained and rework is minimised. Easy integration with common tool holders and turning systems The square 90° form and compact size ensure compatibility with a wide range of standard turning tool holders; the plate thickness T3 offers a robust seating in the pocket for repeatable indexing. The ISO designation SCMW09T308‑RK6 reflects a standardised geometry that simplifies tool planning and inventory: replacement inserts fit existing holder families, reducing tooling system complexity and simplifying operator training. Productivity gains and application guidance Using a coated, application‑specific grade such as WKK20S typically reduces downtime for insert changes and helps keep cycle times consistent across batches. For workshops seeking to optimise cycle time and surface finish on cast iron parts, this insert delivers a balance of wear resistance and edge stability that supports both roughing and medium finishing operations when cutting parameters are selected accordingly. For application recommendations and cutting data tailored to particular cast iron grades, Metav Werkzeuge’s technical consultants can provide cutting speeds, feeds and depth‑of‑cut guidance. For machining cast iron components with proven process security, rely on Walter Tools’ Tiger·tec Silver grade; contact Metav Werkzeuge for order placement or personalised technical advice. Technical Data Article number: SCMW09T308-RK6-WKK20S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Designation: SCMW09T308-RK6 WKK20S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: RK6 Suitable for cast iron machining Plate form: Square 90° FAQ What materials is this insert designed to machine? The SCMW09T308-RK6 WKK20S insert from Walter Tools is designed specifically for machining cast iron materials and is optimised for abrasive chip conditions typical of these alloys. How does the RK6 chipbreaker benefit production processes? The RK6 chipbreaker promotes short, controllable chips during turning operations, improving chip evacuation and reducing the risk of entanglement or surface damage in continuous manufacturing environments. What advantages does the Tiger·tec Silver coating offer? Tiger·tec Silver enhances abrasive wear resistance and edge stability, extending the life of the WKK20S grade and maintaining consistent cutting performance over longer production runs. Is the insert compatible with standard tool holders? Yes; the square 90° form and ISO designation make the insert suitable for a variety of common turning tool holders, with the T3 thickness ensuring secure seating and repeatable indexing. For which operations is this grade most suitable? The insert performs well in roughing and medium finishing on cast iron when appropriate cutting parameters are applied; consult the technical guidance for optimal speed and feed recommendations for specific cast iron grades. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product from the manufacturer.
SCMW120404-RK6 WKK20S Wendeplatten - Walter Tools
Benefit from the wear‑resistant Tiger·tec Silver grade, the RK6 chipbreaker for controlled short chips and the compact 90° square format with a 0.4 mm corner radius for reproducible turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. SCMW120404-RK6 WKK20S Walter Tools — Indexable turning insert with Tiger·tec Silver for cast iron, RK6 chipbreaker SCMW120404-RK6 WKK20S Walter Tools is a square indexable turning insert engineered for productive machining of cast iron, combining a coated carbide grade with a chipbreaker geometry optimised for short, controllable chips. Tiger·tec Silver coated carbide Optimised for cast iron (ISO K) RK6 chipbreaker for short chips 7° clearance angle, 0.4 mm corner Extended tool life and predictable process economy The combination of the Tiger·tec Silver coating and the WKK20S grade delivers pronounced wear resistance and reliable edge stability when machining abrasive cast iron. This coated cemented carbide formulation is tuned to withstand the frequently short, brittle chips typical of grey and nodular cast irons, reducing flank wear and extending tool life. As a result, cycle times remain consistent and regrinding intervals are extended, supporting a more economical production flow. Geometry designed for secure chip control and surface quality The RK6 chipbreaker and the square 90° format ensure controlled chip formation and evacuation, which is critical when turning cast iron. The 7° clearance angle and 0.4 mm corner radius promote a robust cutting edge that resists chipping while maintaining good surface finish. These geometric choices reduce the risk of unstable cutting forces and vibrational damage, enabling higher metal removal rates with consistent component quality. Repeatable clamping and compatibility for series production With the standard SCMW designation and the compact size 12 format, this insert is compatible with a wide range of common toolholders and clamping systems used in turning operations. The tolerance class M and the execution code W support predictable seating and repeatability at index changes, which minimises setup time and simplifies tool management in multi‑shift environments. The insert’s square design gives four usable cutting edges, improving cost efficiency per edge. Application focus and process benefits Specifically developed for the ISO group K (cast iron), this insert is suited to finishing and light‑to‑medium roughing tasks where controlled chip breaking and edge stability are required. The product supports improved process security and consistent productivity, making it a practical choice for jobbing shops and serial manufacturers alike who require robust performance on cast iron components. Contact Metav Werkzeuge for tailored application advice and immediate availability of the Walter Tools SCMW120404-RK6 WKK20S insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SCMW120404-RK6-WKK20S-WALTER Short designation: SCMW120404-RK6 Full designation: SCMW120404-RK6 WKK20S Manufacturer: Walter Tools Product type: Indexable turning insert Series/grade: Tiger·tec Silver, WKK20S Numerical data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 12 Plate form: Square 90° Thickness designation: 04 Tolerance class: M Special features Coating / grade: Tiger·tec Silver, WKK20S Chipbreaker: RK6 Suitable material group: Cast iron (ISO K) Execution: W Geometry: Square insert with 0.4 mm corner radius FAQ Which materials is this insert best suited for? This insert is optimised for machining cast iron (ISO group K); the Walter Tools SCMW120404-RK6 WKK20S grade and Tiger·tec Silver coating are tuned for abrasive, short‑chipping cast irons. What performance advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKK20S grade increases wear resistance and thermal stability, helping the insert maintain edge life and consistent cutting performance when turning cast iron. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker produces short, controllable chips that evacuate reliably, reducing the risk of chip entanglement and improving surface quality during interrupted or continuous cuts. What do the 7° clearance and 0.4 mm radius mean for my process? A 7° clearance angle reduces flank contact and heat build‑up, while a 0.4 mm corner radius delivers a durable cutting edge that balances strength with achievable surface finish. Is the SCMW120404-RK6 compatible with standard holders? Yes; the SCMW format and size 12 designation make the insert compatible with widely used indexable turning holders that accept square 90° inserts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The article offered is an original, factory‑new product of the manufacturer.
SCMW120408-RK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, targeted chip control and long tool life to increase productivity in cast-iron turning operations. The coated carbide grade provides stable edge retention while the RK6 chipbreaker improves chip formation, leading to consistent surface quality and reduced downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SCMW120408-RK6 WKK20S — Turning insert, Tiger‑tec Silver for cast iron (Walter Tools) SCMW120408-RK6 WKK20S is a square turning insert designed for efficient machining of cast iron components in industrial turning applications Square 90° insert for versatile turning Tiger‑tec Silver coated carbide for durability RK6 chipbreaker tuned for cast iron 0.8 mm corner radius for robust edge strength Boosted productivity through advanced coating and grade The Tiger‑tec Silver coating combined with the WKK20S grade ensures excellent resistance to abrasive wear, a critical factor when machining cast iron. The coated carbide substrate is engineered to maintain cutting-edge integrity across longer tool life, reducing the frequency of index changes and machine idle time. In practice, this means more consistent cycle times and a lower tool inventory turnover, which translates directly into measurable productivity gains on the shop floor. Reliable chip control and stable cutting geometry for consistent finishes The integrated RK6 chipbreaker has been developed for the typically short, brittle chips produced by cast-iron materials, improving evacuation and reducing the risk of built-up edge. The square 90° geometry and 0.8 mm corner radius provide a robust cutting edge that withstands interrupted cuts and variability in workpiece material. These features combine to produce repeatable surface quality and dimensional consistency, helping to meet tight tolerances without frequent rework. Practical application advice and compatibility information This turning insert is optimised for machining cast iron according to ISO material group K and is particularly suited to operations that demand stability and predictable wear behaviour. The insert’s geometry and chip control make it a practical choice for medium to heavy roughing and general finishing tasks on cast-iron components. For machining strategies, pairing the insert with stable tool holders and appropriate cutting parameters will further extend service life and improve process reliability. For technical queries or recommendations on cutting data, Metav Werkzeuge offers specialist consultation to match the insert to specific machines and cycles. For specific application support or to order the SCMW120408-RK6 WKK20S by Walter Tools, contact Metav Werkzeuge for tailored advice and fast delivery assistance. Technical data Article number: SCMW120408-RK6-WKK20S-WALTER Designation: SCMW120408-RK6 WKK20S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Silver Core technical data Insert size: 12 mm Thickness: 4.0 mm (04) Corner radius: 0.8 mm Free cutting angle: 7° Tolerance class: M Shape: Square 90° Special features Chipbreaker: RK6 Grade: WKK20S (coated carbide) Application: Cast iron (ISO group K) Coating technology: Tiger‑tec Silver Execution: W FAQ What materials is this insert intended for? The SCMW120408-RK6 WKK20S by Walter Tools is optimised for machining cast iron (ISO group K), designed to handle the abrasive wear and short-chip behaviour typical of these materials. How does the RK6 chipbreaker affect machining? The RK6 chipbreaker on the SCMW120408-RK6 WKK20S improves chip formation and evacuation during cast-iron turning, enhancing process stability and reducing the risk of chip-related interruptions. What cutting-edge robustness can be expected from the insert? With a 0.8 mm corner radius and square 90° geometry, the insert offers a robust cutting edge suited to interrupted cuts and variable cast-iron workpieces, promoting consistent surface quality. Is the grade suitable for both roughing and finishing? The WKK20S grade in the Tiger‑tec Silver family provides a balance of wear resistance and toughness, making it suitable for medium to heavy roughing as well as general finishing of cast iron. Where can users get application data or cutting parameters? For specific cutting data and optimisation, Metav Werkzeuge can provide tailored recommendations for the SCMW120408-RK6 WKK20S based on machine, holder and workpiece details. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMW120412-RK6 WKK20S Wendeplatten - Walter Tools
High-performance Tiger·tec Silver grade WKK20S combined with the RK6 chipbreaker ensures dependable, efficient cast iron machining and consistent chip control; benefit from the robust square 90° geometry and order via Metav Werkzeuge or consult the team for application advice. SCMW120412-RK6 WKK20S square 90° indexable turning insert, Tiger·tec Silver – Walter Tools The SCMW120412-RK6 WKK20S is a square 90° indexable turning insert designed for productive machining of cast iron components in industrial turning operations. Tiger·tec Silver coated carbide grade WKK20S Optimised for cast iron machining (ISO group K) RK6 chipbreaker for controlled chip formation Square 90° insert; 12 mm size; 1.2 mm corner radius Reliable productivity for abrasive cast iron work The Tiger·tec Silver WKK20S grade is a coated carbide developed for the abrasive nature of cast iron and for reliable component batch runs. The combination of coating technology and substrate results in stable wear behaviour and predictable tool life, which supports higher process reliability and fewer tool changes. For production environments that demand consistent output, this insert reduces variability at the cutting edge and helps maintain machining cadence. Controlled chips and sustained edge stability With the RK6 chipbreaker and the square 90° geometry, the insert promotes short, well-controlled chips typical for cast iron machining. Controlled chip formation minimises interruptions and lowers the risk of built-up edge, improving surface quality and operator safety. The insert’s flank and rake geometry are configured to channel chips away from the cutting zone, thereby supporting uninterrupted cycle times and easier chip evacuation in enclosed or automated turning cells. Geometry tuned for flexibility and secure seating The insert’s square 90° form, 1.2 mm corner radius and 12 mm size deliver versatile cutting conditions for both roughing and semi-finishing passes. The moderate corner radius balances strength and surface finish, enabling stable cuts at typical cast iron feeds. The 7° relief angle assists in reducing rubbing on the flank while preserving edge strength, which is advantageous when alternating between heavy and conservative cuts in a single production setup. Application advantages and shopfloor integration Designed primarily for ISO group K materials, the coated carbide grade and chipbreaker combination provide an economical route to quality cast iron components. The insert supports process consistency, fewer set-up adjustments and longer intervals between indexings. For complex requirements or to confirm suitability for a specific machine or operation, Metav Werkzeuge offers technical consultation and application data to align cutting parameters with production goals. Secure high-performance cast iron machining with Walter Tools' Tiger·tec Silver inserts — contact Metav Werkzeuge for technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SCMW120412-RK6-WKK20S-WALTER Article: SCMW120412-RK6 WKK20S Product type: turning insert Brand: Walter Tools Series: Tiger-tec Silver Facts Relief angle: 7° Corner radius: 1.2 mm Insert size: 12 mm Plate thickness: 04 Tolerance class: M Special features Grade: WKK20S (coated carbide) Chipbreaker: RK6 Insert form: square 90° Application: cast iron (ISO group K) Execution: W FAQ What materials is this insert suitable for? This insert is configured for machining cast iron (ISO group K) and the WKK20S grade is optimised for abrasive cast iron work. Which chipbreaker is fitted and what does it deliver? The RK6 chipbreaker provides controlled, short chip formation for safer, more consistent machining with improved surface results when turning cast iron. What are the key geometry specifications of the insert? The insert is a square 90° form with a 1.2 mm corner radius, 12 mm size and a 7° relief angle; these dimensions are tailored for flexible roughing and semi-finishing. Is this an original Walter Tools product and what is the SKU? Yes, the item is an original Walter Tools turning insert; SKU SCMW120412-RK6-WKK20S-WALTER identifies the exact article. When should the WKK20S grade be chosen over other grades? Choose WKK20S when the primary workpiece material is cast iron and the priority is consistent wear behaviour, controlled chips and reliable tool life in production turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
SDEB090308-A67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a proven A67 chipbreaker for stable cutting performance and extended tool life; order directly via Metav Werkzeuge or request advice from our consultants for optimal tool selection. SDEB090308-A67 WSP45G — Square 90° milling indexable insert, Tiger·tec Gold coating (Walter Tools) The SDEB090308-A67 WSP45G is a square 90° milling indexable insert designed for high-performance machining of steel, stainless steel and heat-resistant alloys in versatile milling operations. Tiger·tec Gold PVD coating for long tool life Suitable for steel, stainless and superalloys Square 90° form with 0.8 mm corner radius Consistent edge life for productive milling cycles The SDEB090308-A67 WSP45G is engineered around the Tiger·tec Gold family to deliver predictable tool wear and repeatable cycle times. The PVD-coated carbide grade provides a balance between toughness and wear resistance, which reduces unscheduled tool changes and contributes to a more economical production flow. For operations where short set-up windows and high component volumes matter, the stability of the coating and the designed cutting geometry lower the risk of edge chipping and built-up edge formation, improving first-pass part quality. Robust geometry that supports reliable chip control A fundamental benefit of this insert is the integrated A67 chipbreaker, which is tailored to produce controllable chips across a range of feed rates. The square 90° form and 0.8 mm corner radius help maintain a stable cutting edge in heavy or interrupted milling, while the 15° relief angle reduces rubbing and heat generation at the cutting zone. Together, these features translate into fewer tool-index cycles and improved surface finish, particularly when machining steels and stainless grades under standard coolant conditions. Wide material coverage for process flexibility Selected for its versatility, the grade is suitable for the ISO groups P, M and S — meaning effective performance on steel, stainless steel and superalloys/titanium. This broad applicability simplifies tool inventory: one insert family can serve multiple workpieces without compromising component integrity. The combination of a tough substrate and the high-temperature stability of the coating supports secure chip formation even when cutting materials that are prone to strain-hardening or poor thermal conductivity. Practical advantages in workshop integration From a shop-floor perspective, the square indexable design offers four usable cutting edges per insert, improving cost efficiency per edge and making tool management straightforward. The insert’s size code and thickness are compatible with standard clamping systems for its family, so retrofitting into existing holders is typically straightforward. When paired with appropriate cutting parameters and machine rigidity, the geometry and grade of this insert help reduce vibration and the frequency of rework, supporting leaner manufacturing processes. For tailored application support or to place an order for the Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on the best grade and parameters for the intended application. Technical data SKU: SDEB090308-A67-WSP45G-WALTER Designation: SDEB090308-A67 WSP45G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Size code: 09 Thickness code: 03 Tolerance class: E Special features Chipbreaker: A67 Material suitability: P / M / S (steel, stainless steel, superalloys) Coating technology: Tiger·tec Gold (PVD, coated carbide) Execution: B Family description: Tough, versatile PVD grade optimised for milling FAQ What materials is this insert suitable for? The SDEB090308-A67 WSP45G insert is suitable for steel, stainless steel and superalloys/titanium (ISO groups P, M, S), offering a balanced performance across these materials. What is the relief angle and why does it matter? The insert has a 15° relief angle, which reduces rubbing at the flank and helps control cutting temperatures and friction during milling. How does the A67 chipbreaker affect machining? The A67 chipbreaker is designed to produce short, controllable chips over a range of feeds, improving surface finish and reducing the risk of chip entanglement in milling operations. How large is the corner radius and what is its benefit? This insert features a 0.8 mm corner radius, which increases edge strength for interrupted or heavy cuts and contributes to longer edge life compared with smaller radii. Can these inserts be indexed for multiple edges? Yes, the square 90° form provides up to four usable cutting edges per insert, supporting cost-effective edge utilisation and straightforward indexing. Manufacturer: Walter Tools (Walter AG, part of the Sandvik Group); AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
SDET09T3AZN-F57 WEP20 Wendeplatten - Walter Tools
The combination of a WEP20 cermet grade, a F57 chipbreaker and a 15° clearance angle ensures reliable chip control and consistent edge life for finishing operations. Order the insert directly via Metav Werkzeuge or consult our application specialists for suitability in specific machining tasks. SDET09T3AZN-F57 WEP20 – Walter Tools milling insert, square 90°, 15° clearance SDET09T3AZN-F57 WEP20 is a square milling insert designed for finishing and stable chip formation in precision milling applications, offering a balance of edge stability and process reliability Cermet grade WEP20 for wear resistance Square 90° geometry for shoulder milling 15° clearance angle for reduced rubbing F57 chipbreaker for controlled chip formation Proven edge life through cermet technology The use of the WEP20 cermet grade provides a hard, wear‑resistant cutting edge that is optimised for finishing and where consistent surface quality matters. Cermet substrates combine high hardness with improved hot hardness, resulting in extended tool life under steady cutting conditions. For production environments seeking predictable tool change intervals and reduced rework, the cermet composition contributes directly to productivity gains and lower per‑part tooling costs. Controlled chip formation and process stability The integrated F57 chipbreaker is engineered to generate short, controllable chips that evacuate reliably from the cut, reducing the risk of recutting and tool damage. Coupled with the square 90° insert geometry and a 15° clearance angle, this design minimises rubbing and vibration during shoulder milling and light to medium finishing passes. The insert thickness T3 contributes to rigidity at the cutting edge, supporting stable cutting parameters and consistent surface finish. Clear specification for easy tool matching With the ISO designation SDET09T3AZN-F57 WEP20 and tolerance class E, the insert is straightforward to identify and match with compatible toolholders. The series information indicates the insert belongs to Walter’s open series for the WEP20 grade; material suitability should be verified against the manufacturer’s product matrix to ensure correct application. This clarity in specification simplifies procurement and spare‑part management for toolrooms and production planners. For application advice, availability or to request the SDET09T3AZN-F57 WEP20 for an upcoming job, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to obtain tailored recommendations and delivery options Technical Data SKU: SDET09T3AZN-F57-WEP20-WALTER Designation: SDET09T3AZN-F57 WEP20 Type: Milling insert Manufacturer: Walter Tools Facts Clearance angle: 15° Insert shape: Square 90° Insert size: 09 Thickness: T3 Chipbreaker: F57 Tolerance class: E Special features Grade: WEP20 (cermet) Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig ISO designation: SDET09T3AZN-F57 WEP20 Execution: T FAQ What machining tasks suit this insert best? The SDET09T3AZN-F57 WEP20 milling insert is optimised for finishing operations and shoulder milling where controlled chip formation and consistent surface quality are required. Is WEP20 suitable for roughing operations? WEP20 is a cermet grade focusing on wear resistance and surface finish; for heavy roughing, alternative grades may be preferable—consult the WEP20 product matrix for confirmation. How does the F57 chipbreaker affect cutting parameters? The F57 chipbreaker on the SDET09T3AZN-F57 WEP20 encourages short, controllable chips, allowing for stable feeds and reduced risk of recutting in typical finishing passes. What does tolerance class E mean for toolholders? Tolerance class E indicates a defined dimensional tolerance that aids repeatable seating and clamping in standard toolholders when using the SDET09T3AZN-F57 WEP20. Can the insert be used across different materials? The WEP20 grade is a cermet; material suitability varies—verify the insert’s performance against the manufacturer’s product matrix before use. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer. The Walter brand is used where applicable to describe the product and its original manufacturer.
SDET1204AZN-F57 WEP20 WEP20 Wendeplatten - Walter Tools
Take advantage of the WEP20 cermet grade and the F57 chipbreaker to achieve consistent finishing performance and reliable chip control; combine that with the robust square 90° geometry for durable corner life. Order through Metav Werkzeuge or consult our team for application-specific recommendations. SDET1204AZN-F57 WEP20 milling indexable insert — square 90°, 15° clearance — Walter Tools The SDET1204AZN-F57 WEP20 is a cermet milling indexable insert engineered for productive finishing operations and stable chip control in general milling applications. Cermet grade WEP20 for fine finishing Square 90° geometry for robust corners 15° clearance angle for reduced cutting forces Integrated F57 chipbreaker for stable chip control Predictable finishing and extended edge life The cermet WEP20 composition is optimised for high-quality surface finishes and predictable wear behaviour. As a cermet grade, it combines ceramic hardness with metallic toughness, which promotes a fine cutting edge and extended tool life in finishing passes. The square 90° shape provides strong corner support, reducing the risk of chipping under moderate loads, while the tolerance class E ensures consistent seat and repeatability across insert changes. These attributes help maintain part quality and reduce rework rates. Stable chip control and process reliability Integrated F57 chipbreaker geometry manages chip formation reliably during interrupted or continuous cuts, promoting smooth evacuation and reduced recutting. Coupled with the 15° clearance, the insert lowers cutting forces and heat generation at the cutting edge, improving stability in the machining process. This combination supports higher feed stability and contributes to predictable cycle times — essential for process planners seeking reproducible results and improved machine utilisation. Easy integration into existing tool systems The insert is available in the standard ISO designation SDET1204AZN-F57 WEP20, which facilitates quick identification and replacement in compatible milling holders. The execution code T and plate thickness 04 are specified for mechanical compatibility; check the customer’s toolholder matrix for exact seating details. Because material suitability can depend on the specific tool–workpiece combination, the product matrix should be consulted for final application selection, ensuring the insert meets the required process demands. For precision finishing tasks with Walter Tools’ WEP20 cermet grade, contact Metav Werkzeuge for tailored application advice or detailed technical data by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number / SKU: SDET1204AZN-F57-WEP20-WALTER ISO designation: SDET1204AZN-F57 WEP20 Product type: Milling indexable insert Grade / Sort: WEP20 Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness: 04 Clearance angle: 15° Plate form: Square 90° Chipbreaker: F57 Tolerance class: E Special features Cermet cutting material (WEP20) Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Katalogabhängig Suitable for finishing applications; verify product matrix for material range FAQ What materials is this insert suitable for? Material suitability depends on the specific application matrix; the SDET1204AZN-F57 WEP20 uses a cermet grade that is typically chosen for finishing operations — please consult the product matrix for confirmed workpiece material compatibilities. How does the F57 chipbreaker affect performance? The F57 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of chip-related downtime and improving surface finish consistency when used within recommended cutting parameters. What does tolerance class E mean for tool setup? Tolerance class E denotes the manufacturing tolerance for the insert; this ensures a consistent fit and repeatability in the toolholder, contributing to predictable seating and machining accuracy. Can this insert be used for roughing operations? This insert is optimised for finishing and medium-duty milling due to the WEP20 cermet composition and fine-edge geometry; for heavy roughing, consider inserts and grades specifically designed for higher mechanical loads. How is the 15° clearance angle beneficial? A 15° clearance angle reduces cutting edge contact with the workpiece behind the cutting lip, lowering friction and heat generation, which helps maintain the sharpness of the cutting edge during finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanation only. The supplied item is an original, factory-new product of the manufacturer.
SDGT06T2PDR-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP25S grade for consistent edge life and high productivity when machining steel and cast iron; combine reliable chip control with the square 90° form for stable milling. Order or request application advice via Metav Werkzeuge if further consultation is required. SDGT06T2PDR-D57 WKP25S milling indexable insert – Tiger·tec Silver, for steel & cast iron, Walter Tools SDGT06T2PDR-D57 WKP25S is a square 90° milling insert designed for general and interrupted milling of steels and cast irons Tiger·tec Silver coating for long tool life Suitable for steel and cast iron machining Square 90° form for high stability Chipbreaker D57 for reliable chip control Maximise material removal with stable, repeatable performance The Tiger·tec Silver series and the WKP25S grade combine to deliver a balance of wear resistance and fracture toughness that suits continuous and semi-interrupted milling. The coated carbide substrate provides a protective layer that reduces abrasive wear and thermal load during cutting, which translates into longer edge life and fewer index changes on the toolholder. For production environments where cycle time and tool-change frequency affect throughput, this insert supports a steady, efficient process by maintaining a predictable cutting edge under typical steel and cast iron conditions. Clear chip management and form for secure cutting The integrated chipbreaker D57 and the square 90° geometry enhance chip control and clamping stability. The chipbreaker is engineered to produce short, controllable chips when machining P- and K-type materials, reducing the risk of entanglement and improving surface finish consistency. The 15° clearance angle reduces rubbing at the flank while ensuring sufficient strength of the cutting edge, which is especially beneficial in heavier engagement passes or interrupted cuts. This geometry contributes directly to safer, more reliable milling cycles and fewer surface defects. Practical grade choice for versatile shop-floor use The WKP25S grade targets a broad workpiece spectrum, explicitly optimised for steel (P) and cast iron (K) according to ISO grouping. The coating and substrate combination is suitable for a range of cutting speeds common in roughing and semi-finishing operations, offering an economical compromise between aggressive material removal and acceptable tool life. For customers seeking a standardised insert that simplifies inventory while covering common production tasks, this indexable plate reduces complexity without compromising process stability. Contact Metav Werkzeuge today for tailored application advice and to request Walter Tools SDGT06T2PDR-D57 WKP25S inserts for your milling operations Technical data SKU: SDGT06T2PDR-D57-WKP25S-WALTER Article designation: SDGT06T2PDR-D57 WKP25S Product type: Milling indexable insert (fräswendeschneidplatte) Manufacturer: Walter Tools Core specifications Size designation: 06 Thickness: T2 Clearance angle: 15° Shape: Square 90° Chipbreaker: D57 Tolerance class: G Materials & features Series: Tiger·tec Silver Grade/Sorte: WKP25S (coated carbide) Suitable for: Steel (P) and Cast iron (K) Version / execution: T FAQ What materials is this insert suitable for? The SDGT06T2PDR-D57 WKP25S is specified for steel (P) and cast iron (K) applications; the WKP25S grade and Tiger·tec Silver coating are optimised for the wear and chip characteristics of these material groups. How does the Tiger·tec Silver coating benefit milling operations? The Tiger·tec Silver coating on the SDGT06T2PDR-D57 WKP25S reduces abrasive wear and helps maintain cutting-edge integrity, which results in longer usable life and more consistent performance across production runs. What is the purpose of the D57 chipbreaker? The D57 chipbreaker is engineered to break and evacuate chips efficiently when machining P and K materials, improving surface quality and reducing the likelihood of chip-related interruptions during milling. Is the square 90° form advantageous for heavy cuts? The square 90° form provides a robust cutting corner and stable clamping for higher radial loads, making the insert suitable for demanding engagement conditions and interrupted milling where edge strength is important. Can this insert be used in finishing operations? While primarily designed for general and productive milling, the insert's performance in finishing depends on cutting parameters and tool setup; fine finishing typically requires optimised feeds and speeds and may benefit from a grade or geometry specifically tailored for low-roughness results rather than high material removal. Manufacturer: Walter Tools; part of Walter AG, Tübingen, Germany; www.walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer Walter Tools.
SDGT06T2PDR-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust WKP35G carbide grade and the D57 chipbreaker for stable, productive milling of steel and cast iron; order through Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SDGT06T2PDR-D57 WKP35G milling indexable insert — Walter Tools, Tiger·tec Gold, for steel and cast iron SDGT06T2PDR-D57 WKP35G is a coated carbide indexable milling insert engineered for reliable material removal in steel (P) and cast iron (K) applications, combining a Tiger·tec Gold grade with a D57 chipbreaker for consistent chip control. Tiger·tec Gold coating for extended tool life Suitable for steel and cast iron machining D57 chipbreaker for predictable chip formation 15° clearance angle for secure cutting geometry Consistent performance through optimised coating and grade The combination of the Tiger·tec Gold coating with the WKP35G grade provides an excellent balance of wear resistance and toughness; this results in longer edge life and fewer insert changes during production. The coated carbide substrate is designed to cope with the typical heat and abrasive wear encountered when machining unalloyed and alloyed steel, and the same robustness supports the short, often brittle chips of cast iron. By choosing this grade, process stability is improved and unpredictable tool wear is reduced, so milling cycles maintain consistent dimensional accuracy. Reliable chip control and secure cutting geometry Equipped with a D57 chipbreaker and a 15° clearance angle, the insert is tailored for controlled chip breaking and stable cutting forces. The chipbreaker geometry promotes regular, compact chips that are easier to evacuate from the cutting zone, reducing the risk of re-cutting and surface damage. The square 90° plate form with a standardised size designation ensures repeatable seating and alignment in modular toolholders, which contributes to predictable vibration behaviour and improved surface finish in the machined component. Efficient adaptation in production environments The insert’s square 90° format and a standard thickness class of T2 allow flexible indexing and economical use of four cutting edges per insert. This geometry is practical for a range of milling operations, including face milling and shoulder milling where a robust edge is required. The tolerance class G and the plate designation ensure compatibility with Walter Tools tool systems and standardised clamping solutions, supporting quick replacement and reduced downtime. For many workshops, the result is a quantifiable improvement in productivity owing to fewer insert changes and consistent part quality. Contact Metav Werkzeuge for tailored tooling advice and to obtain the SDGT06T2PDR-D57 WKP35G insert for your milling process Technical Data Article number: SDGT06T2PDR-D57-WKP35G-WALTER SKU: SDGT06T2PDR-D57-WKP35G-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Core data Grade: WKP35G Chipbreaker: D57 Clearance angle: 15° Plate form: Square 90° Plate size: 06 Thickness: T2 Tolerance class: G Design and applications Coating technology: Tiger·tec Gold Material suitability: Steel (P) Material suitability: Cast iron (K) Execution: T Insert designation: SDGT06T2PDR-D57 WKP35G FAQ What materials is this insert intended for? The SDGT06T2PDR-D57 WKP35G insert from Walter Tools is intended for machining steel (P) and cast iron (K), with the Tiger·tec Gold grade optimised for those material groups. How does the D57 chipbreaker affect machining? The D57 chipbreaker on this indexable insert promotes compact, regular chips and improved evacuation, which supports stable cutting conditions and better surface quality during milling. How many cutting edges are available per insert? The square 90° format provides multiple indexable edges; the insert can be rotated to present fresh cutting edges, maximising material utilisation. Is the insert compatible with standard Walter Tools holders? Yes, the SDGT06T2PDR-D57 WKP35G is produced to standardised dimensions and tolerance class G, ensuring compatibility with Walter Tools clamping systems designed for this insert type. Where can further technical data be obtained? For additional cutting data, recommended speeds and feeds or application-specific guidance, contact Metav Werkzeuge or consult Walter Tools technical documentation for the SDGT06T2PDR-D57 WKP35G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no association between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
SDGT06T2PDR-D57 WKP35S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WKP35S grade delivers a cost-effective balance of durability and stable chip formation for demanding milling operations in steel and cast iron. Benefit from the square 90° form and the D57 chipbreaker for reliable chip control and predictable tool life. Order the SDGT06T2PDR-D57 WKP35S directly via Metav Werkzeuge or ask our consultants if needed. SDGT06T2PDR-D57 WKP35S — Walter Tools indexable milling insert, Tiger·tec Silver, for steel and cast iron A SDGT06T2PDR-D57 WKP35S indexable milling insert designed for productive roughing and semi-finishing of steel and cast iron with an emphasis on process stability and repeatable results Tiger·tec Silver coating for long life Suitable for steel and cast iron Square 90° form for robust edge Chipbreaker D57 for controlled chips High productivity through optimised grade and coating The insert combines the WKP35S cutting grade with the Tiger·tec Silver coating to address common industrial challenges when machining P- and K-group materials. The coated carbide substrate is engineered for improved wear resistance and heat management, which helps to extend tool life under typical milling conditions. By prioritising stable chip formation, this solution reduces unexpected downtime and supports a predictable production rhythm in mixed steel and cast iron workpieces. The result is greater throughput and fewer interruptions to the machining cycle. Geometry and chip control that improve process reliability The square 90° plate form provides a sturdy cutting edge and straightforward indexing, while the D57 chipbreaker is tailored to promote short, controllable chips in both ductile and brittle materials. The insert’s 15° free angle contributes to a secure seating and consistent engagement with the workpiece, aiding cutting-edge stability during heavy cuts. These geometric choices deliver tangible benefits: improved surface quality when semi-finishing and reduced risk of built-up edge during tougher roughing tasks. Operators can therefore rely on repeatable results across serial production batches. Practical application and advantages for workshop workflows Selected for use on steel and cast iron, the insert is suitable for shops seeking a flexible, all-round milling solution that simplifies tooling variants. The combination of coated carbide and a robust chipformer reduces tool consumption and machining variability, which often translates to lower unit costs over time. As an indexable component, it supports fast edge changes and easy stock management. For engineers and planners, the insert offers a pragmatic balance between performance and operational simplicity, making it a sound choice for both jobbing environments and production lines where consistent output matters. Contact Metav Werkzeuge today for tailored application advice or to arrange supply of the Walter Tools SDGT06T2PDR-D57 WKP35S indexable milling insert — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: SDGT06T2PDR-D57-WKP35S-WALTER Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Designation: SDGT06T2PDR-D57 WKP35S Facts Free angle: 15° Shape: Square 90° Size code: 06 Thickness code: T2 Chipbreaker: D57 Tolerance class: G Special features Coating: Tiger·tec Silver Material suitability: P (steel), K (cast iron) Substrate: Coated carbide Execution: T Range: Tiger-tec Silver series FAQ What materials is this insert suitable for? The SDGT06T2PDR-D57 WKP35S is specified for machining steel and cast iron (ISO groups P and K), reflecting the design intent of the WKP35S grade and the Tiger·tec Silver coating. What advantage does the D57 chipbreaker offer? The D57 chipbreaker promotes controlled, short chips across a range of cut depths, improving chip evacuation and reducing the risk of entanglement during milling. How many edges are available per insert? The square 90° geometry typically allows multiple indexable edges; this form supports economical edge rotation to extend usable life of each insert. What does the WKP35S designation indicate? WKP35S is a Walter Tools coated-carbide grade within the Tiger·tec Silver technology, optimised for a balance of wear resistance and stable cutting in steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com