SDGT1204AZN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip formation and Tiger·tec Gold coating for reliable performance in demanding milling tasks; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SDGT1204AZN-F57 WSM35G indexable milling insert — square 90°, Tiger·tec Gold by Walter Tools The SDGT1204AZN-F57 WSM35G is an indexable milling insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant alloys, offering a Tiger·tec Gold coated carbide grade for enhanced edge stability. Tiger·tec Gold coated carbide grade WSM35G Square 90° insert for robust milling 15° relief angle for secure cutting F57 chipbreaker for stable chip control Reliable performance on hard-to-machine alloys The WSM35G grade, part of the Tiger·tec Gold series, combines a coated carbide substrate with a tailored coating system to provide thermal resistance and improved edge life when machining difficult materials. For rostfreier Stahl and high-temperature alloys, this results in stable chip formation and reduced tendency for built-up edge, which maintains dimensional accuracy over longer production runs. The insert’s construction supports consistent wear behaviour, which helps to keep changeover intervals predictable and machining costs under control. Geometry and chip control that boost productivity A square 90° plate form together with the F57 chipbreaker and a 15° relief angle delivers balanced cutting forces and reliable chip evacuation in interrupted and continuous milling. The geometry reduces chatter risk and spreads cutting load across the edge, improving surface finish and cutter life. In practical terms, fewer tool changes and a steady process window mean higher effective spindle time and measurable gains in shop-floor productivity when working with rostfreier Stahl and titanium alloys. Practical application guidance for the workshop The insert is supplied in the ISO designation SDGT1204AZN-F57 WSM35G, suitable for toolholders that accept this format. Because machining parameters depend on workpiece condition and fixture rigidity, parameter selection should start from conservative feeds and speeds typical for coated carbide on rostfreier Stahl, then be adjusted for stability and surface finish. The combination of grade and chipbreaker supports a wide range of cutting conditions, enabling flexibility across series production and prototype milling tasks while keeping performance consistent. Discuss specific cutting data or request tailored recommendations from Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: SDGT1204AZN-F57-WSM35G-WALTER Label: Fräswendeschneidplatte SDGT1204AZN-F57 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte ISO designation: SDGT1204AZN-F57 WSM35G Facts Relief angle: 15° Plate form: Square 90° Plate size: 12 Plate thickness: 04 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F57 Material groups: S / M Suitable for: rostfreier Stahl; heat‑resistant superalloys and titanium Application focus: heavy cutting of difficult‑to‑machine materials FAQ What materials is this insert designed for? The SDGT1204AZN-F57 WSM35G is formulated for rostfreier Stahl and heat‑resistant superalloys, with proven behaviour on titanium alloys. What are the main advantages of the WSM35G grade? WSM35G offers coated carbide durability with thermal stability from the Tiger·tec Gold technology, promoting stable chip formation and extended edge life. Which chipbreaker does the insert use and why? The insert uses an F57 chipbreaker, optimised for controlled chip breaking and evacuation during face and slot milling operations. How does the insert geometry affect machining? The square 90° form and 15° relief angle deliver balanced cutting forces and consistent contact conditions, improving surface finish and process stability. Is the SDGT1204AZN-F57 compatible with standard ISO toolholders? Yes, the insert follows the SDGT ISO designation and fits cutters designed to accept that format; ensure toolholder compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
SDGT1204AZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, precise chip control and a robust cutting edge for consistent productivity in demanding milling operations; order the insert via Metav Werkzeuge or consult the team for application advice. Fräswendeschneidplatte SDGT1204AZN-F57 WSP45G — coated carbide, Tiger·tec Gold (Walter Tools) The SDGT1204AZN-F57 WSP45G is a square 90° milling insert designed for versatile, heat-resistant milling in steels, rostfreier Stahl and high-temperature alloys, suited to applications where stable chip formation and edge life are essential. Tiger·tec Gold coated carbide grade WSP45G Suitable for P / M / S material groups Square 90° form with 15° clearance Chipbreaker F57 for controlled chip formation Precision and performance for high-temperature materials The SDGT1204AZN-F57 WSP45G insert combines Tiger·tec Gold coating technology with a coated carbide substrate to deliver high resistance to thermal and mechanical wear. Its composition supports consistent cutting-edge stability during interrupted cuts and elevated temperatures, which translates directly into longer tool life and fewer changeovers. The chipbreaker F57 promotes reliable chip control for varied feed rates, reducing the risk of built-up edge and helping to maintain component tolerances during series production. Versatility across material groups with predictable results Designed for the ISO groups P / M / S, the insert is optimised for machining unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. The insert’s geometry and coating manage heat and strain at the cutting zone so that performance remains repeatable even when cutting demanding alloys. This predictability supports process planning: stable cycle times, consistent surface finish and reduced rework contribute to measurable productivity gains on mixed-batch runs. Robust geometry that reduces set-up risk and improves consistency The Square 90° plate form and 15° clearance ensure accurate seating and effective load distribution in the tool holder. The insert’s tolerance class G and execution T are matched to standard pocket designs, enabling straightforward integration with existing tool holders and fixtures. By focusing on mechanical stability and precise geometry, the design lowers the likelihood of vibration-related wear, supporting sustained performance in medium- to heavy-duty milling. Practical advantages in shop-floor workflows Beyond material compatibility, the insert’s characteristics simplify process optimisation: the Tiger·tec Gold coating improves resistance to adhesion and abrasive wear, while the coated carbide base maintains edge integrity under thermal stress. These attributes reduce downtime for tool changes and allow higher metal removal rates where the process and machine rigidity permit. Operational benefits include fewer tool inventories to cover multiple materials and more predictable maintenance intervals — factors that positively affect total production costs and on-time delivery. For reliable, high-temperature milling solutions choose the Walter Tools Tiger·tec Gold WSP45G insert and contact Metav Werkzeuge for tailored application support and ordering guidance. Technical data Article number: SDGT1204AZN-F57-WSP45G-WALTER Designation: SDGT1204AZN-F57 WSP45G Series: Tiger-tec Gold Grade: WSP45G Material group: P / M / S Manufacturer: Walter Tools Facts Free cutting angle: 15° Size: 12 Thickness: 04 Tolerance class: G Chipbreaker: F57 Special features Coated carbide (Tiger·tec Gold technology) Square 90° plate form Execution: T Suitable for Stahl, rostfreier Stahl, superalloys/titanium FAQ What materials are suitable for this milling insert? The SDGT1204AZN-F57 WSP45G insert is suitable for ISO groups P / M / S — that is, Stahl, rostfreier Stahl and heat-resistant superalloys/titanium — thanks to the Tiger·tec Gold coating and robust carbide grade. Which chip behaviour can be expected with the F57 chipbreaker? The chipbreaker F57 on this Walter Tools milling insert promotes controlled chip formation across common feeds, reducing risks of clogging and enabling stable cutting forces for predictable cycle times. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold improves thermal resistance and reduces adhesion at the cutting edge, which in the SDGT1204AZN-F57 WSP45G insert results in longer edge life and fewer interruptions during series production. Is the insert compatible with standard 90° square tool holders? Yes, the Square 90° plate form and tolerance class G are intended for standard pocket designs, facilitating integration into common 90° milling tool holders. Can this insert handle interrupted cuts and elevated temperatures? The combination of coated carbide and the Tiger·tec Gold technology in the SDGT1204AZN-F57 WSP45G insert provides enhanced edge stability and wear resistance for interrupted cuts and high-temperature milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
SDGT1204AZN-G77 WSP45G WSP45G Wendeplatten - Walter Tools
Combine the wear resistance of the Tiger·tec Gold coating with the versatile WSP45G grade and the 15° relief for productive milling; order the SDGT1204AZN-G77 WSP45G via Metav Werkzeuge or contact our consultants for application advice. SDGT1204AZN-G77 WSP45G milling indexable insert — Tiger·tec Gold, square 90°, 15° relief — Walter Tools SDGT1204AZN-G77 WSP45G is a square milling indexable insert designed for versatile machining across steels, stainless steels and heat-resistant alloys Tiger·tec Gold PVD coating for high durability Suitable for Steel, Stainless steel and Superalloys Square 90° insert with 15° relief angle G77 chipbreaker for stable chip formation Maximise uptime with a wear-resistant coating and robust grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a clear performance advantage for high‑productivity milling. The PVD-based coating enhances wear resistance and reduces flank wear under interrupted cuts, while the coated carbide substrate ensures edge stability. For production environments where consistent tool life is essential, this insert supports longer cutting times and fewer tool changes, improving overall process efficiency and lowering downtime. Reliable performance across demanding materials Designed for applications in steel, stainless steel and heat‑resistant superalloys, the insert’s substrate and coating balance toughness and hardness to resist chipping and build‑up. The classification P / M / S reflects suitability for typical steel machining, the tougher behaviour of rostfreiem Stahl and the thermal challenges of nickel‑based alloys and titanium. This enables one grade to cover multiple workpiece groups, simplifying tooling logistics and contributing to predictable cycle times and reproducible component quality. Controlled chip flow for safer, more efficient milling The G77 chipbreaker geometry promotes stable chip formation, especially in medium to heavy milling passes. Combined with the square 90° shape and 15° relief angle, the insert gives a secure cutting edge engagement and good tool strength for shoulder milling and pocketing. Stable chips reduce the risk of recutting and improve surface finish, translating technical geometry into tangible process benefits: fewer interruptions, cleaner parts and a lower probability of rework. Practical integration and application guidance The insert is supplied in the ISO designation SDGT1204AZN‑G77 WSP45G, allowing straightforward selection of compatible toolholders for established milling systems. The nominal size "12" and plate thickness "04" correspond to common holder families, enabling quick retrofit into existing toolsets. For customers uncertain about seat tolerances or clamping specifics, Metav Werkzeuge’s consultants can advise on holder matching and recommended cutting data to exploit the Tiger·tec Gold advantages while maintaining secure clamping and repeatable results. Contact Metav Werkzeuge today to discuss how the Walter Tools Tiger·tec Gold SDGT1204AZN‑G77 WSP45G insert can improve cycle times and tool life for specific applications; our team is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SDGT1204AZN-G77-WSP45G-WALTER Product name: Fräswendeschneidplatte / milling indexable insert SDGT1204AZN‑G77 WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Insert size: 12 Thickness: 04 Relief angle: 15° Shape: Square 90° Chipbreaker: G77 Tolerance class: G Special features Coating technology: Tiger·tec Gold (PVD) Grade: WSP45G Suitable for: Steel (P), Stainless steel (M), Superalloys / Titanium (S) Execution: T Application focus: versatile milling applications, robust edge stability FAQ Which materials can this insert machine effectively? The SDGT1204AZN‑G77 WSP45G insert from Walter Tools is formulated for machining steel, stainless steel and heat‑resistant superalloys, making it suitable where a single grade is preferred for mixed material production. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WSP45G grade increases wear resistance and thermal stability, allowing the Walter Tools insert to maintain edge integrity under elevated temperatures and intermittent cutting conditions. What geometry and angles does this insert feature? This square 90° insert has a 15° relief angle and the G77 chipbreaker, offering strong edge support and controlled chip evacuation for a range of milling operations. Is this insert compatible with standard milling holders? The ISO designation SDGT1204AZN‑G77 identifies the insert geometry for compatibility with matching toolholders; for precise holder selection, refer to holder manufacturer specifications or consult technical advisors. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT1204PDR-D57 WKP25S WKEP25S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP25S grade for stable chip control and long tool life; the square 90° geometry and 15° clearance angle ensure robust shoulder milling and consistent surface quality. Order the SDGT1204PDR-D57 WKP25S insert directly via Metav Werkzeuge or ask our consultants if needed. SDGT1204PDR-D57 WKP25S indexable milling insert — Tiger·tec Silver, for steel and cast iron — Walter Tools A SDGT1204PDR-D57 WKP25S indexable milling insert engineered for productive shoulder and face milling on steel and cast iron, combining a square 90° form with a chipbreaker matched to mixed-material workshops. Tiger·tec Silver coating for enhanced wear resistance Square 90° geometry for robust shoulder milling 15° clearance angle for stable cutting performance Optimised for steel and cast iron machining Greater productivity through controlled wear and longer tool life The combination of the WKP25S cutting grade and the Tiger·tec Silver coating delivers improved wear resistance and thermal stability during continuous operation. This translates into fewer insert changes and a lower cost per component in series production. The coated carbide substrate is formulated to resist abrasive wear typical of ferrous materials, meaning stable cutting-edge behaviour under elevated temperatures. For production managers, the practical benefit is predictable tool life and reduced machine downtime, which supports tighter process planning and higher overall throughput. Robust geometry for reliable shoulder and face milling The square 90° plate form with a 15° clearance angle provides a solid support geometry for shoulder milling and face cutting tasks where axial and radial loads vary. The insert’s geometry and hardened seating reduce vibration and maintain dimensional stability at the cutting edge, leading to consistent surface finish and repeatable part accuracy. In short-cycle operations or when machining interrupted cuts, this geometry minimises the risk of edge chipping and supports higher feed rates without sacrificing workpiece quality. Practical material coverage and application guidance Designed for the ISO material groups P and K, the insert is optimised for machining steel and cast iron. The designation reflects the plate’s suitability for unalloyed and alloyed steels as well as abrasive cast materials; the integrated chipbreaker D57 helps control breaking and evacuation of the typical chips produced by these groups. For users less familiar with cutting grades, this means fewer built-up-edge occurrences and more reliable chip flow, reducing the need for manual chip clearing and improving operator safety at the machine. Process reliability that supports consistent results A focus on stable chip formation and a tough coated microstructure ensures the insert maintains its cutting geometry over longer tool life, which supports process reproducibility across shifts. The result is consistent part quality and less inspection rework. For job shops and production lines alike, the capability to run parts with fewer tool interventions means better machine utilisation and a clearer path to meeting delivery commitments. The insert’s tolerance class G underlines the precision level expected for secure seating and predictable cutting behaviour. For tailored recommendations on integrating this Walter Tools insert into existing setups, contact Metav Werkzeuge for consulting and availability. Technical Data Article number: SDGT1204PDR-D57-WKP25S-WALTER Product type: Fräswendeschneidplatte / indexable milling insert Grade: WKP25S Series: Tiger·tec Silver Chipbreaker: D57 Facts Shape: Square 90° Size: 12 Thickness: 04 Clearance angle: 15° Tolerance class: G Special features Coating technology: Tiger·tec Silver Material group suitability: P / K (steel, cast iron) Manufacturer: Walter Tools Series and sort description: Coated carbide insert optimised for ferrous materials FAQ What materials is this insert suitable for? The SDGT1204PDR-D57 WKP25S is optimised for steel (ISO group P) and cast iron (ISO group K), offering reliable performance across both material types. Which geometry advantages does the square form provide? A square 90° geometry offers solid edge support for shoulder and face milling, increasing resistance to radial and axial loads and promoting consistent surface finish. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating improves thermal resistance and wear control, extending tool life and enabling stable cutting conditions when machining ferrous materials. Is the chipbreaker suitable for interrupted cuts? The D57 chipbreaker is designed to control chip formation for steels and cast irons, supporting safer chip evacuation and reduced risk of edge damage during interrupted cutting. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
SDGT1204PDR-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for sustained wear resistance and consistent chip control during steel and cast-iron machining; order the insert directly via Metav Werkzeuge or consult the technical team for tailored cutting data. SDGT1204PDR-D57 WKP35G Milling Indexable Insert – Square 90°, Tiger·tec Gold (Walter Tools) A SDGT1204PDR-D57 WKP35G milling insert engineered for high-productivity turning and milling operations, optimised for ISO P and K workpiece groups Tiger·tec Gold coating for improved wear resistance D57 chipbreaker for controlled chip formation Square 90° geometry for robust cutting edges Suited to steel (P) and cast iron (K) High productivity through advanced coating and grade The combination of the Tiger·tec Gold series and the WKP35G grade delivers a balance of wear resistance and thermal stability that benefits medium- to high-performance machining. As a coated carbide option, the insert is designed to tolerate the heat and mechanical load typical of steel and cast-iron operations, which reduces frequency of tool changes and supports continuous production runs. The technical design focuses on consistent cutting-edge behaviour to maintain surface quality over extended cycles. Reliable chip control and robust geometry for stable machining A dedicated D57 chipbreaker is integrated to shape and evacuate chips predictably, reducing the risk of built-up edge and workpiece damage. The square 90° profile and the 15° clearance create a sturdy cutting corner that resists deflection under higher radial loads, contributing to dimensional stability and repeatable component quality. The insert thickness and tolerance class support dependable seating and repeatable indexability in standard toolholders. Clear benefits for workshop efficiency and process security Using this indexable insert translates to fewer interruptions in the production sequence and improved process security thanks to the material match for steel and cast iron. The proven chip control and stable cutting edge reduce rework and inspection time, supporting faster throughput and reliable reproducibility. For operations aiming to raise productivity without compromising surface finish, this insert provides a practical and measurable advantage. Selection and integration guidance for production use When integrating the insert into a tool system, consider rigid fixturing and correct seat geometry to exploit the tolerance class G and maintain repeatability. The grade is compatible with a wide range of cutting parameters across ISO P and K classes; for challenging cuts or unusual alloys, consult technical data sheets or the supplier’s application specialists. Practical application advice and cutting-data recommendations are available from Metav Werkzeuge to ensure the insert is used at optimum cutting speeds and feeds for the intended machining task. Discuss application suitability and availability with Metav Werkzeuge for tailored cutting data and delivery options Technical Data SKU: SDGT1204PDR-D57-WKP35G-WALTER Name: SDGT1204PDR-D57 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Insert shape: Square 90° Free rake/clearance angle: 15° Insert size: 12 Thickness: 04 Chipbreaker: D57 Tolerance class: G Execution: T Special features Coating: Tiger·tec Gold Material compatibility: P (steel), K (cast iron) Application: Milling indexable insert for high productivity Design emphasis: Stable chip formation and robust cutting edge FAQ What materials is this insert suitable for? The SDGT1204PDR-D57 WKP35G insert is designed for steel (P) and cast iron (K) applications, leveraging the Tiger·tec Gold coating and WKP35G grade for abrasion and heat resistance. How does the D57 chipbreaker affect performance? The D57 chipbreaker provides controlled chip formation and evacuation, reducing the chance of built-up edge and improving surface finish when machining steels and cast irons. Can this insert be indexed for four cutting edges? Yes, the square 90° geometry supports multiple edge indexing, allowing efficient use of the insert corners before replacement. What does the tolerance class G mean in practice? Tolerance class G indicates the dimensional precision of the insert seating and edge geometry, supporting repeatable positioning and stable performance in production toolholders. Is this insert suitable for heavy interrupted cuts? The robust square geometry and 15° clearance offer good resistance to edge chipping under demanding conditions; however, final suitability depends on specific cutting parameters and fixturing. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The offered item is an original, factory-new product of the manufacturer.
SDGT1204PDR-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WPP35G grade and a square 90° geometry with 15° relief for reliable, efficient steel machining — order or request cutting data via Metav Werkzeuge for seamless production planning. SDGT1204PDR‑D57 WPP35G milling insert — square 90°, 15° relief — Walter Tools The SDGT1204PDR‑D57 WPP35G is a square milling insert engineered for productive steel machining, combining a Tiger·tec Gold coating and a D57 chipbreaker for controlled swarf formation. Tiger·tec Gold coating for long tool life Grade WPP35G optimised for steel machining Square 90° form with 15° relief for stable cutting Reliable chip control with D57 chipbreaker Proven wear resistance and application for steel The combination of a coated carbide substrate and the Tiger·tec Gold technology offers a pronounced improvement in wear resistance and thermal stability when machining steels. The insert’s WPP35G grade is specifically balanced between wear resistance and toughness — indicated in the series data as a blend of wear‑resistant and tougher properties — which reduces the likelihood of premature edge failure under typical steel cutting conditions. This balance supports consistent material removal rates and extends the interval between tool changes, delivering tangible gains in machine uptime and cost efficiency. Stable cutting geometry for consistent surface quality A square 90° insert geometry paired with a 15° relief angle brings rigidity to the cutting edge and predictable engagement behaviour. The D57 chipbreaker is designed to break and evacuate chips efficiently during continuous and interrupted cuts, improving process stability and minimising rework caused by poor chip control. The result is a more uniform surface finish and reduced risk of vibration-induced tool wear, which together contribute to shorter cycle times and improved first‑pass yield in production environments. Clear selection criteria and machining benefits Selection of the SDGT1204PDR‑D57 WPP35G fits where steel is the primary workpiece material and a compromise between edge life and toughness is required. The coated grade supports higher cutting speeds and offers enhanced resistance to built‑up edge formation, while the square form provides flexibility for indexing to multiple edges. For applications requiring repeatable performance and predictable tool life, this insert reduces process variation and simplifies tool management on the shop floor. Compatibility, handling and process integration The insert is specified for standard indexable milling systems and integrates into established toolholders with standard clamp assemblies. Its design supports straightforward edge indexing and replacement, limiting downtime during tool changes. For definitive cutting parameters, feeds and speeds, or to confirm compatibility with a specific holder, technical data sheets and practical guidance are available to support process set‑up and optimisation, ensuring smoother commissioning and reproducible results. For tailored recommendations on deploying Walter Tools Tiger·tec Gold inserts in steel machining, contact Metav Werkzeuge to request cutting data, availability and delivery options — assistance is available for process selection and batch planning. Technical data SKU: SDGT1204PDR-D57-WPP35G-WALTER Label: Fräswendeschneidplatte SDGT1204PDR-D57 WPP35G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Core specifications Grade: WPP35G Relief angle: 15° Plate form: Square 90° Plate size: 12 Plate thickness: 04 Chipbreaker: D57 Tolerance class: G Special features Coating: Tiger·tec Gold Substrate: Coated carbide Material application: Steel (ISO P) Execution: T WPL designation: SDGT1204PDR-D57 WPP35G Story trigger: wendeplatten FAQ What materials is this insert best suited for? This milling insert is optimised for steel machining; the WPP35G grade and Tiger·tec Gold coating are tuned for ISO P workpiece groups. How does the D57 chipbreaker affect performance? The D57 chipbreaker promotes reliable chip formation and evacuation, improving process stability and surface finish when using the SDGT1204PDR‑D57 WPP35G in steel applications. Can the insert withstand interrupted cuts? Yes, the combination of the coated substrate and the balanced WPP35G grade provides toughness suitable for many interrupted cutting scenarios in steel. How many usable edges are available from the square 90° geometry? The square 90° form permits multiple edge indexes; practical edge count depends on the specific holder and mounting orientation used with the SDGT1204PDR‑D57. Where to obtain cutting data and toolholder compatibility information? Cutting data and holder compatibility can be provided on request; Metav Werkzeuge offers technical support and detailed parameter sheets for Walter Tools inserts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
SDGT1204PDR-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating, the WSM35G grade and the 15° free angle to achieve stable cutting edges and reliable chip control; order the insert directly via Metav Werkzeuge or consult the on-site specialists for tailored application advice. SDGT1204PDR-D57 WSM35G milling insert — Tiger·tec Gold coating, 15° free angle (Walter Tools) A SDGT1204PDR-D57 WSM35G milling insert designed for secure chip formation and high process reliability when machining stainless steels and heat‑resistant superalloys Tiger·tec Gold coating for wear resistance WSM35G grade for stainless steel and superalloys 15° free angle for improved chip formation Square 90° geometry with D57 chipbreaker Extended tool life from advanced Tiger·tec Gold coating The combination of the Tiger·tec Gold technology and the WSM35G grade yields a coated carbide solution that prioritises edge stability under thermal and mechanical stress. The coating reduces abrasive and adhesive wear, which leads to fewer tool changes and a more consistent tool life. For operations on materials that tend to work‑harden or generate heat, such as stainless steels and superalloys, this insert supports controlled wear behaviour and helps maintain dimensional accuracy over longer runs. Consistent chip control and improved surface quality The geometry with a 15° free angle and the D57 chipbreaker is engineered to promote predictable chip formation and evacuation. A stable micro‑geometry on the cutting edge reduces tendencies for built‑up edge and improves surface finish in demanding cuts. The square 90° outline gives robust support to the cutting edge, which is beneficial for interrupted cuts or shoulder milling where edge integrity directly affects component quality and cycle times. Reliable performance across demanding materials and processes This insert is specified for material groups M and S according to ISO, making it suitable for rostfrei applications and heat‑resistant alloys that are challenging to machine. The design emphasises process security and repeatability, enabling higher productivity with fewer unexpected interruptions. Selecting this milling solution supports more efficient setups and predictable tool life, which contributes to reduced downtime and a better cost‑per‑part ratio for serial production. For tailored application recommendations with Walter Tools' Tiger·tec Gold inserts and fast availability, contact Metav Werkzeuge for technical guidance and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SDGT1204PDR-D57-WSM35G-WALTER Designation: SDGT1204PDR-D57 WSM35G Type: Milling insert Manufacturer: Walter Tools Facts Free angle: 15° Insert form: Square 90° Size: 12 Thickness designation: 04 Chipbreaker: D57 Tolerance class: G Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Suitable material groups: S / M (superalloys/titanium and stainless steels) Series: Tiger‑tec Gold Execution: T FAQ What materials is this insert suitable for? The SDGT1204PDR-D57 WSM35G milling insert is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering secure chip control and edge stability in those materials. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes short, manageable chips and supports continuous chip evacuation; when combined with the insert geometry it helps to avoid entanglement and improves surface finish for many milling tasks. What is the significance of the 15° free angle? A 15° free angle reduces contact with the workpiece flank, lowering friction and heat at the cutting edge; this contributes to improved edge life and consistent cutting performance in challenging materials. Is the insert coated and why does that matter? Yes — the insert features Tiger·tec Gold coating, which enhances wear resistance and thermal stability; the coating contributes to longer tool life and better performance in demanding production environments. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
SDGT1204PDR-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance and precise chip control for reliable, high-productivity milling. The coated carbide grade and Tiger·tec Gold PVD technology provide stable cutting performance across demanding alloys; order the insert or request application advice via Metav Werkzeuge. SDGT1204PDR-D57 WSP45G milling insert (for Stahl, rostfreier Stahl, superalloys) — Tiger·tec Gold, Walter Tools The SDGT1204PDR-D57 WSP45G is a square 90° milling insert engineered for heavy-duty and finish milling tasks across Stahl, rostfreier Stahl and heat-resistant alloys, offering a balanced combination of wear resistance and edge stability. Tiger·tec Gold PVD coating for enhanced wear resistance Suitable for Stahl, rostfreier Stahl and superalloys Square 90° form with 15° clearance angle D57 chipbreaker for controlled chip formation Coated carbide grade WSP45G for versatile milling Extended tool life through modern coating technology The combination of the Tiger·tec Gold PVD system with the WSP45G coated carbide grade significantly improves resistance to abrasive and adhesive wear, leading to longer effective tool life and fewer indexings. This results in lower overall tooling consumption and more consistent cycle times. The coating's thermal stability supports elevated cutting parameters in many applications, so shops benefit from improved process stability without compromising surface quality. Predictable chip control and secure cutting geometry With a D57 chipbreaker integrated into a square 90° geometry and a 15° clearance angle, the insert delivers dependable chip formation for a wide range of cutting depths and feed rates. The controlled chip flow reduces the risk of built-up edge and improves coolant reach to the cutting zone, which supports consistent surface finish and reduces secondary operations. This geometry is especially valuable when machining interrupted cuts and varying workpiece conditions. Broad material capability and stable edge performance Designed for versatile use, the insert is specified for machining Stahl, rostfreier Stahl and demanding superalloys and titanium, making it suitable for mixed-production environments. The coated grade is optimised for toughness and wear resistance, enabling secure edge integrity under thermal and mechanical load. Its tolerance class G and compact plate thickness provide repeatable seating and indexability, supporting reproducible machining results in batch and single-part production. For advice on optimising cutter assemblies with Tiger·tec Gold inserts or to check compatibility with specific milling operations, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: SDGT1204PDR-D57-WSP45G-WALTER Designation: SDGT1204PDR-D57 Product type: milling insert Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 04 Clearance angle: 15° Tolerance class: G Special features Grade: WSP45G (coated carbide) Coating: Tiger·tec Gold (PVD) Chipbreaker: D57 Shape: Square 90° Material suitability: Stahl / rostfreier Stahl / superalloys and titanium Series: Tiger-tec Gold FAQ Which materials is this insert suitable for? The SDGT1204PDR-D57 WSP45G insert is specified for machining Stahl, rostfreier Stahl and heat-resistant superalloys including titanium, reflecting the WSP45G grade's balanced toughness and wear resistance. What performance benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold PVD on the WSP45G grade enhances thermal and abrasive wear resistance, improving tool life and supporting higher cutting parameters while maintaining edge stability for Walter Tools milling inserts. How does the D57 chipbreaker influence machining? The D57 chipbreaker promotes controlled chip formation and evacuation, reducing built-up edge and improving surface quality, particularly in varying depths of cut and interrupted milling. What is the insert geometry and how does it affect clamping? The square 90° shape with a 15° clearance angle offers robust cutting edges for general milling, while the tolerance class G ensures repeatable seating and indexability in compatible toolholders. Can this insert be used for finishing and roughing operations? Yes; the WSP45G coated carbide and the Tiger·tec Gold coating provide a compromise between toughness and wear resistance that suits both roughing and finishing when cutting parameters are set accordingly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer Walter Tools.
SDGW09T304-A88 WDN20 WDN20 Wendeplatten - Walter Tools
The combination of a PCD grade (WDN20) and the A88 chipbreaker delivers sustained tool life and dependable chip control for abrasive, non‑ferrous machining; the 15° clearance and 0.4 mm corner radius support consistent surface quality and dimensional stability. Order or request technical advice via Metav Werkzeuge for fast, application‑oriented support. SDGW09T304-A88 WDN20 – PCD milling indexable insert (A88 chipbreaker) by Walter Tools The SDGW09T304-A88 WDN20 is an indexable milling insert designed for productive machining of non‑ferrous and abrasive, non‑ferrous materials in industrial milling applications. *PCD grade WDN20 for high wear resistance *A88 chipbreaker for controlled chip formation *15° clearance angle for smooth cutting *0.4 mm corner radius for fine surface finish Designed for long tool life in abrasive, non‑ferrous applications The insert is produced in a polycrystalline diamond (PCD) grade WDN20, which is engineered for high wear resistance when machining abrasive, non‑ferrous materials. Because PCD provides a very hard cutting edge, tool life is extended and flank wear is reduced, resulting in fewer index changes and less unplanned downtime. The WDN20 grade is suitable where consistency under abrasive conditions is required; the material matrix should be consulted to confirm optimal applications. Efficient chip control and stable machining performance Integrated chipbreaker A88 geometry promotes predictable chip formation and evacuation, which supports higher feed rates and stable cutting forces. The controlled chips reduce the risk of rework caused by surface damage, while the 15° clearance angle helps to avoid rubbing and heat build‑up at the flank. These geometric choices are intended to improve process reliability and to enable more productive machining cycles on modern milling equipment. Geometry tuned for surface quality and dimensional accuracy The square, 90° insert shape with a 0.4 mm corner radius provides a balance between edge strength and the ability to achieve a refined surface finish on workpieces. The nominal thickness T3 and size code 09 are designed to fit common, robust milling cutter bodies, allowing secure clamping and repeatable positioning. Where fine edge definition and consistent part tolerances are priorities, this geometry minimises vibration and aids in achieving a uniform finish. Application guidance and economical operation Because PCD inserts behave differently to carbide in terms of edge preparation and cutting data, recommended cutting parameters should be confirmed against the specific material and machine setup. The SDGW09T304-A88 WDN20 is particularly effective on abrasive non‑ferrous alloys and composite materials; this results in lower overall tooling cost per component when high wear resistance reduces the frequency of index changes. For series production, the extended life of the PCD grade often produces measurable cost benefits and greater process stability. For application advice, tooling selection or to secure compatible Walter Tools inserts, contact Metav Werkzeuge for tailored technical support and prompt delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDGW09T304-A88-WDN20-WALTER Designation: SDGW09T304-A88 WDN20 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.4 mm Insert shape: Square 90° Size code: 09 Thickness: T3 Tolerance class: G Special features Grade: WDN20 (PCD – polycrystalline diamond) Chipbreaker: A88 Series: Walter Schneidstoffsorte – Serie offen Material suitability: Non‑ferrous and abrasive, non‑ferrous materials (verify product matrix) Geometry benefits: predictable chip control, improved surface quality FAQ What materials is this insert intended for? The SDGW09T304-A88 WDN20 insert is formulated for abrasive, non‑ferrous materials; it is a PCD grade intended primarily for machining non‑ferrous alloys and abrasive composites, but the product matrix should be checked for specific material matches. How does the A88 chipbreaker affect machining? The A88 chipbreaker promotes controlled chip formation and evacuation, helping the insert to maintain consistent cutting forces and to reduce the risk of surface damage during milling with the SDGW09T304-A88 WDN20. What advantage does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength compared with a sharper corner while still allowing a fine surface finish; this helps to improve dimensional stability and reduce edge chipping during roughing and finishing passes with the insert. Is this insert compatible with standard cutter bodies? The SDGW09T304-A88 WDN20 uses common industry form factors (size code 09, thickness T3, square 90°) and is compatible with milling cutters designed for these insert dimensions; secure clamping and correct seat geometry are essential for repeatable results. How should cutting data be adapted for PCD inserts? Cutting data for PCD grades like WDN20 typically differ from carbide recommendations; consult Walter Tools guidance or Metav Werkzeuge technical support for parameter optimisation tailored to the specific workpiece material and machine tool. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metal machining and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
SDGW09T3AZR-A88 WDN20 WDN20 Wendeplatten - Walter Tools
Take advantage of the PCD-grade WDN20 for extended wear resistance together with the rigid square 90° geometry and the A88 chipbreaker for reliable chip control; order the insert directly via Metav Werkzeuge or consult our application specialists for matching grades and clamping recommendations. SDGW09T3AZR-A88 WDN20 milling indexable insert by Walter Tools — PCD grade for non‑ferrous, abrasive applications The SDGW09T3AZR-A88 WDN20 is a precision milling indexable insert developed for high‑wear machining of non‑ferrous and abrasive non‑ferrous materials, combining a robust square 90° form with a specialised chipbreaker for stable cutting. PCD grade WDN20 for abrasive materials Square 90° geometry for high rigidity 15° clearance angle for consistent cutting A88 chipbreaker for controlled chip formation Maximise uptime with a wear‑resistant PCD grade The insert’s core advantage is the polycrystalline diamond (PCD) grade WDN20, which delivers markedly higher wear resistance when machining abrasive non‑ferrous materials such as certain aluminium alloys and other non‑ferrous alloys with hard inclusions. This results in longer intervals between index changes and reduced machine downtime, improving process economics in volume milling operations. The combination of PCD and the A88 chipbreaker further supports consistent chip evacuation, which minimises rework and tool‑related interruptions. Stable cutting geometry for reproducible surface quality Designed in a square 90° form with a 15° clearance angle and T3 plate thickness, the insert provides a stable cutting edge and predictable contact geometry. The square profile increases support in the pocket and reduces bending loads during side milling, which helps to maintain a uniform surface finish across batches. For operations where dimensional consistency matters, the geometry contributes directly to process stability and reduces the need for frequent fine adjustments on the machine. Practical handling and application guidance for reliable results The A88 chipbreaker is optimised for controlled chip segmentation under typical milling feeds used for non‑ferrous alloys; correct feed and speed selection ensures the chipbreaker functions as intended. While the grade and chipbreaker are suited to abrasive, non‑ferrous workpieces, it is important to check the product matrix for specific workpiece‑grade compatibility and recommended cutting data. Clamping integrity and correct seat cleanliness are essential to exploit the insert’s rigidity and to avoid undesired tool movement. Why this insert fits production environments This indexable solution is aimed at shops and production lines seeking predictable tool life and process reliability when facing abrasive non‑ferrous materials. The combination of WDN20 PCD, A88 chip control, and the 90° form reduces the risk of premature wear and improves throughput. For application advice or assistance in selecting the correct seat and clamping system, technical consultation is available to match the insert to the machine and machining strategy. Contact Metav Werkzeuge for tailored application advice and availability of the Walter Tools SDGW09T3AZR-A88 WDN20 insert Technical data SKU: SDGW09T3AZR-A88-WDN20-WALTER Article designation: SDGW09T3AZR-A88 WDN20 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Chipbreaker: A88 Materials & features Grade: WDN20 (polycrystalline diamond, PCD) Series: Walter cutting‑grade series – open Intended for: non‑ferrous and abrasive non‑ferrous materials (check product matrix) Geometry: square insert for stable milling FAQ What materials is this insert intended for? The SDGW09T3AZR-A88 WDN20 insert is specified for non‑ferrous and abrasive non‑ferrous materials; verify compatibility with the product matrix for exact alloys. How does the PCD grade affect tool life? The WDN20 PCD grade offers high wear resistance in abrasive non‑ferrous applications, which typically extends tool life compared with carbide alternatives. Which chip control is provided by the insert? The integrated A88 chipbreaker is designed to promote controlled chip formation and evacuation at the recommended cutting data. Is the square 90° form suitable for shoulder milling? Yes—the square 90° geometry provides increased rigidity for shoulder and face milling operations where a robust edge is required. Where to get cutting data and application advice? Cutting data and tailored application advice are available from Metav Werkzeuge; consult the product matrix to match the WDN20 grade to the specific workpiece. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SDGW120408 WDN20 W DN20 Wendeplatten - Walter Tools
Take advantage of the combination of PKD wear resistance, stable chip control and a compact 12 mm size for high throughput in abrasive non‑ferrous machining; order the SDGW120408-A88 WDN20 milling indexable insert via Metav Werkzeuge or consult their specialists for application-specific advice SDGW120408-A88 WDN20 milling indexable insert – PKD for abrasive non‑ferrous materials (Walter Tools) A SDGW120408-A88 WDN20 milling indexable insert designed for high wear resistance in non‑ferrous and abrasive, non‑ferrous workpieces PKD grade WDN20 for abrasive non‑ferrous materials Square 90° form with 0.8 mm corner radius 15° clearance angle for secure cutting geometry A88 chipbreaker for controlled chip evacuation Maximise uptime through extreme wear resistance The use of PKD (polycrystalline diamond) in the WDN20 grade provides markedly superior wear resistance, which translates into longer in‑service life for the insert and fewer tool changes in serial production. For machining abrasive, non‑ferrous materials the hard diamond cutting layer minimises flank wear and abrasion, maintaining the cutting edge over extended cycles. The economic effect is a higher output per insert and more predictable tool life, which supports stable production planning and reduces downtime in milling operations. Reliable finishes and consistent chip evacuation The insert’s A88 chipbreaker combined with a 0.8 mm corner radius and a square 90° form produces a repeatable cutting geometry that helps deliver consistent surface quality. The 15° clearance angle reduces rubbing while maintaining contact stability, which improves dimensional consistency and reduces the need for secondary finishing. Controlled chip formation results in easier chip management at higher feed rates, supporting both accuracy and process security in demanding applications. Simple specification and integration into tool programmes Available in a nominal 12 mm size with a 4 mm thickness, the insert fits compact milling setups where space and repeatability are priorities. The item is produced under Walter Tools’ open series for this cutting material and carries tolerance class G, which helps when standardised indexing and repeatable seating are required. Material suitability should be verified against the manufacturer’s product matrix before application; the grade is primarily intended for non‑ferrous and abrasive non‑ferrous materials, where PKD offers clear advantages over carbide alternatives. Contact Metav Werkzeuge for application guidance and availability of the Walter Tools PKD insert; Metav Werkzeuge can advise on suitable grades, recommended cutting data and delivery options Technical data Article number: SDGW120408-A88-WDN20-WALTER Designation: SDGW120408-A88 WDN20 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Insert size: 12 mm Thickness: 4 mm Corner angle: 90° Tolerance class: G Special features Cutting material: PKD (polycrystalline diamond) WDN20 Chipbreaker: A88 Series: Walter Schneidstoffsorte - Serie offen Execution: W Material specification: Katalogabhängig FAQ What materials is this insert intended for? The SDGW120408-A88 WDN20 insert is intended for non‑ferrous and abrasive, non‑ferrous materials where PKD performance is required; suitability should be checked in the product matrix for specific alloys Can the insert be used for high feed milling? The combination of A88 chipbreaker and the square 90° geometry allows stable chip control at elevated feeds while maintaining surface consistency with the WDN20 PKD grade Is this insert regrindable or resharpenable? PKD inserts such as the SDGW120408-A88 WDN20 are generally not suitable for conventional resharpening; replacement is the recommended approach to preserve process reliability Which clamping systems accept this insert? The insert is a standard square 90° format compatible with toolholders designed for SDGW‑style indexable inserts; check holder compatibility and clamping torque with the toolholder manufacturer How does the corner radius affect the machined component? A 0.8 mm corner radius provides a balance between edge strength and achievable detail, improving edge life while contributing to a smoother surface finish in interrupted and continuous cuts Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product from the manufacturer.
SDHT06T204-G88 WK10 T Wendeplatten - Walter Tools
Benefit from the combination of uncoated carbide WK10, a 15° relief angle and the G88 chipbreaker for controlled material removal and stable tool life; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. T SDHT06T204-G88 WK10 – Indexable milling insert, square 90°, Walter Tools A T SDHT06T204-G88 WK10 square indexable milling insert designed for versatile milling tasks with a 15° relief angle and G88 chipbreaker, intended for industrial milling applications. Uncoated carbide WK10 grade 15° relief angle for stable cutting 0.4 mm corner radius for fine contours Engineered for consistent cutting performance The insert is made in the uncoated carbide grade WK10, which provides a consistent cutting edge for general milling operations. The 15° relief angle reduces rubbing at the flank and improves entry behaviour during interrupted cuts, while the square 90° form gives robust corner support for slotting and face milling. The combination of these design choices results in reliable cutting conditions and predictable tool life. Material suitability should be verified against the manufacturer’s product matrix before final selection to ensure optimal performance. Precise chip control and surface finish The integrated G88 chipbreaker is engineered to promote short, controlled chips, lowering the risk of jamming and improving evacuation in through-cut and pocket milling. The 0.4 mm corner radius softens the cutting edge transition to deliver improved surface quality on contours and reduce stress concentration at the insert corner. Together, the chipbreaker and corner geometry support stable surface results and repeatable component tolerances when paired with an appropriate cutter body. Practical fit, handling and process integration With a designation matched to standard cutter bodies and a tolerance class H for consistent seating, this square insert is straightforward to integrate into established milling fixtures. The T2 thickness and size 06 offer a balance between rigidity and adaptability in a wide range of toolholders. The inserts belong to the Walter Schneidstoffsorte – Serie offen, and the exact material and application window should be checked in the official product matrix. For optimisation of cutting data, insert seat and clamping method, Metav Werkzeuge advisers can provide tailored recommendations. Contact Metav Werkzeuge for tailored application advice or to order the T SDHT06T204-G88 WK10 insert directly; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: SDHT06T204-G88-WK10-WALTER SKU: SDHT06T204-G88-WK10-WALTER Label: Fräswendeschneidplatte SDHT06T204-G88 WK10 Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 0.4 mm Thickness: T2 Size: 06 Tolerance class: H Special features Chipbreaker: G88 Shape: Square 90° Grade: WK10 (uncoated carbide) Execution: T Base designation: SDHT06T204-G88 ISO designation: SDHT06T204-G88 WK10 FAQ What materials is this insert suitable for? Material suitability must be confirmed against the manufacturer’s product matrix; the SDHT06T204-G88 WK10 is supplied in an uncoated carbide grade and users should check the matrix for specific workpiece materials and cutting conditions. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes short chips and consistent chip flow, which supports cleaner evacuation and safer milling cycles when using the SDHT06T204-G88 WK10 insert in appropriate cutter bodies. What do the insert geometry values mean for application? The square 90° form and 0.4 mm corner radius define the insert’s edge strength and contour capability; combined with the 15° relief angle, these values influence entry behaviour, finish and corner durability for the indexable milling insert. Is the insert compatible with standard toolholders? The insert’s designation and tolerance class H indicate it is made for standard cutter seats; ensure compatibility by referencing the cutter manufacturer’s holder catalogue and the SDHT06T204-G88 WK10 ISO designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
SDHT06T204-G88 WXN15 Wendeplatten - Walter Tools
Combining a sharp, uncoated carbide grade (WXN15) with a G88 chipbreaker and a 15° clearance angle delivers productive, low‑adhesion machining of non‑ferrous metals; order original Walter Tools inserts directly via Metav Werkzeuge or consult our technical advisors for process matching. SDHT06T204-G88 WXN15 indexable milling insert by Walter Tools — square 90°, 15° clearance SDHT06T204-G88 WXN15 is an uncoated carbide indexable milling insert designed for productive milling of non‑ferrous metals such as aluminium, copper and brass Uncoated carbide WXN15 for non‑ferrous metals G88 chipbreaker for controlled chip formation Square 90° form with 0.4 mm corner radius 15° clearance angle, size 06, thickness T2 Increased productivity for non‑ferrous machining The insert combines an uncoated carbide grade optimised for adhesive‑prone materials with a geometry suited to light, sharp cutting. This results in consistent material removal with reduced built‑up edge and fewer surface imperfections when working with aluminium, copper and brass. The design targets efficient finishing and semi‑finishing passes, enabling shorter cycle times while maintaining surface quality. The insert’s geometry and grade reduce friction and the tendency for chips to stick, which benefits throughput in batch and single‑piece production. Consistent chip control and predictable tool behaviour Featuring a G88 chipbreaker and a small 0.4 mm corner radius, the insert ensures predictable chip segmentation and evacuation. Controlled chip formation lowers heat concentration at the cutting edge and reduces the risk of workpiece damage or recutting of chips. These properties extend the usable edge life and stabilise machining performance over longer runs, contributing to less frequent index changes and fewer interruptions in the process. The result is more reliable output and simpler process planning for production teams. Robust geometry for stable milling set‑ups The square 90° form with a 15° clearance angle and size 06 body offers a robust seating and repeatable orientation in standard milling holders. The plate thickness T2 and the tolerance class H ensure dimensional stability and interchangeability in automated tool systems. Compatibility with the Walter N‑series means straightforward integration into established tool families and easy stock handling. Together, these attributes support secure clamping, consistent cutting engagement and simple index‑based edge usage for cost‑effective tool management. For robust, efficient machining of non‑ferrous materials with original Walter Tools quality, contact Metav Werkzeuge for application advice or to secure the SDHT06T204‑G88 WXN15 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical Data SKU: SDHT06T204-G88-WXN15-WALTER Article name: Fräswendeschneidplatte SDHT06T204-G88 WXN15 Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (indexable milling insert) Series: Walter N‑Sortensystem Grade: WXN15 Chipbreaker: G88 Designation without grade: SDHT06T204-G88 Core data Clearance angle: 15° Corner radius: 0.4 mm Form: Square 90° Insert size: 06 Thickness: T2 Tolerance class: H Special features Uncoated carbide grade WXN15 Suitable for non‑ferrous metals (ISO group N) Sharp cutting edge geometry for adhesive‑prone materials G88 chipbreaker for controlled chip formation Integration with Walter N‑series tool families FAQ What materials is this insert intended for? The SDHT06T204‑G88 WXN15 insert is optimised for non‑ferrous metals, specifically aluminium, copper and brass, as indicated by the WXN15 grade and the G88 chipbreaker design. Is the insert coated or uncoated? This insert uses an uncoated carbide grade (WXN15) to provide the sharp edge and low friction required for machining adhesive, non‑ferrous materials. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes controlled chip segmentation and evacuation, which reduces heat at the cutting edge and leads to more stable running and longer usable edge life for the SDHT06T204‑G88 insert. Which insert geometry and dimensions are relevant for tool holders? Key dimensions are the square 90° form, 0.4 mm corner radius, size 06 and T2 thickness; these ensure reliable seating and repeatable indexing in compatible Walter milling tool holders. Can this insert be used for roughing and finishing? The insert is suitable for semi‑finishing and finishing operations in non‑ferrous materials where sharp edges and good surface quality are required, while controlled chip formation helps in light roughing strategies as well. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned exclusively for explanation. There is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new merchandise from the manufacturer.
SDHT09T304-G88 WK10 T Wendeplatten - Walter Tools
Benefit from the combination of predictable chip control, a robust uncoated carbide grade (WK10) and a compact square design to maintain a smooth milling process; order the insert directly via Metav Werkzeuge or ask the consultants for application support. SDHT09T304-G88 WK10 milling indexable insert — square 90°, 15° relief (Walter Tools) The SDHT09T304-G88 WK10 is a square milling indexable insert designed for general-purpose milling tasks where consistent chip formation and economical tool life are required. Square 90° geometry for stable engagement Chipbreaker G88 for controlled chip formation WK10 uncoated carbide grade for reliable wear resistance Consistent chip control that improves process reliability The combination of a defined chipbreaker G88 and the square 90° form ensures stable chip formation and repeatable cutting behaviour. This reduces the risk of unpredictable tool loads and supports steady cycle times in batch production. The 15° relief helps to lower friction at the cutting edge, which in turn contributes to a more uniform cutting process and fewer interruptions for rework or inspection. Practical durability from an uncoated carbide grade Manufactured in the WK10 uncoated carbide grade and supplied in a compact T3 thickness, the insert offers a balance between cutting-edge stability and economical wear characteristics. The moderately sized corner radius 0.4 mm provides a compromise between edge strength and surface finish, making the insert suitable for a range of common materials when matched to appropriate cutting data. The open Walter grade series means the insert is a straightforward choice for routine milling where coated grades are not required. Easy integration and clear installation guidance for workshops The square 90° shape and standard ISO designation simplify tool inventory and machine setup; the insert fits conventional cutter pockets for indexable milling. The format reduces handling complexity in busy shops and allows for quick indexing when an edge change is needed. For workshop planning, the compact geometry and uncoated composition allow predictable tool-change intervals and straightforward monitoring of edge condition during scheduled maintenance checks. For a productive and dependable milling edge, request availability of the Walter Tools SDHT09T304-G88 WK10 from Metav Werkzeuge and consult our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for application-specific recommendations Technical Data Article number: SDHT09T304-G88-WK10-WALTER SKU: SDHT09T304-G88-WK10-WALTER Designation: SDHT09T304-G88 WK10 Product type: Milling indexable insert Facts Shape: Square 90° Relief angle: 15° Corner radius: 0.4 mm Size designation: 09 Thickness: T3 Tolerance class: H Special features Chipbreaker: G88 Grade/series: WK10 (uncoated carbide) Form: Quadrate 90° Execution: T Series description: Walter Schneidstoffsorte - Serie offen Material: Catalogue-dependent (Katalogabhängig) FAQ What materials is this insert suitable for? The SDHT09T304-G88 WK10 is supplied in an uncoated WK10 carbide grade; material suitability should be checked against the product matrix, with the insert typically used for general machining tasks. Is the chipbreaker suitable for high-volume milling? Yes, the chipbreaker G88 is designed to deliver controlled chips for stable production conditions when cutting parameters are set according to standard practice. How does the corner radius affect surface finish? A corner radius of 0.4 mm improves edge strength while still enabling a consistent surface finish in many routine milling applications. Can this insert be indexed in standard square pockets? The square 90° geometry is compatible with conventional cutter pockets designed for ISO square indexable inserts; confirm pocket fit against the ISO designation before use. What is the exact product designation and manufacturer? Product designation: SDHT09T304-G88 WK10 — milling indexable insert by Walter Tools, SKU SDHT09T304-G88-WK10-WALTER Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
SDHT09T304-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp, uncoated carbide cutting and G88 chip control for efficient machining of non‑ferrous metals; order the insert directly via Metav Werkzeuge or consult the technical team for application support. SDHT09T304-G88 WXN15 milling indexable insert — uncoated carbide, 15° clearance | Walter Tools The SDHT09T304-G88 WXN15 is a square 90° milling indexable insert designed for efficient, sharp-edge machining of non‑ferrous metals such as aluminium and brass Uncoated carbide grade WXN15 for non‑ferrous metals Square 90° geometry with 0.4 mm corner radius 15° clearance angle for sharp-edge cutting G88 chipbreaker for reduced material adhesion Precise grade and intended application for non‑ferrous work The insert is manufactured in the Walter N-grade philosophy and uses the uncoated WXN15 cemented carbide, a configuration optimised for machining non‑ferrous metals. The combination of an uncoated, very sharp cutting edge and a dedicated chip geometry reduces the risk of material smearing on the cutting edge—especially important for aluminium and brass. This results in stable cutting conditions, improved surface quality and fewer interruptions for edge cleaning. The designation and series data indicate suitability for friction‑sensitive materials rather than general‑purpose steel machining. Controlled chip formation and process stability with the G88 breaker The integrated G88 chipbreaker is designed to split and evacuate chips reliably in soft and ductile substrates. In practice, a chipbreaker reduces built‑up edge formation and prevents long stringy chips from wrapping the tool, which increases operational uptime. For workshops aiming at predictable cycle times, the chip geometry translates into consistent chip shape and machine load. The term chipbreaker here refers to a profiled land on the insert face that guides and segments material flow, improving both tool life and operator safety during high feed operations. Geometry and tolerances that support reproducible production The square 90° geometry with a 0.4 mm corner radius and a 15° clearance angle delivers a balance between strength and sharpness: the corner radius provides a defined edge for finishing passes while the clearance angle reduces rubbing on the flank. The plate thickness T3 and tolerance class H ensure repeatable seating in standard toolholders and reliable indexing. These dimensional and tolerance details help maintain part accuracy across batches and simplify tool programme validation in CNC setups. The result is a predictable, high‑quality finish with reduced rework. For application recommendations, tooling configuration or rapid supply of Walter Tools WXN15 inserts, contact Metav Werkzeuge for tailored advice and prompt delivery Technical data SKU: SDHT09T304-G88-WXN15-WALTER Designation: SDHT09T304-G88 WXN15 Product type: milling indexable insert Manufacturer: Walter Tools Series: Walter N‑Sortensystem Facts Clearance angle: 15° Corner radius: 0.4 mm Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: H Special features Chipbreaker: G88 Grade: WXN15 (uncoated cemented carbide) Suitable for: Non‑ferrous metals (N) Execution: T Base designation: SDHT09T304-G88 FAQ What materials is this insert best suited for? The SDHT09T304-G88 WXN15 insert is optimised for non‑ferrous metals such as aluminium, copper alloys and brass; the uncoated WXN15 grade and G88 chipbreaker aim to prevent material adhesion. How does the G88 chipbreaker affect machining? The G88 chipbreaker on the SDHT09T304-G88 insert promotes segmented chips and stable evacuation, which reduces built‑up edge and improves surface finish during milling of ductile materials. Can this insert be used for finishing passes? Yes, the combination of 0.4 mm corner radius and 15° clearance angle makes the insert suitable for finishing and light‑interrupted cuts in non‑ferrous applications, offering a good balance between sharpness and edge strength. Is the insert compatible with standard square indexable holders? The SDHT09T304-G88 WXN15 follows common square 90° geometry dimensions and the T3 plate thickness, enabling use in holders designed for that designation when clamped according to the holder manufacturer’s specifications. What does the WXN15 grade indicate? WXN15 denotes an uncoated cemented carbide grade developed for sharp‑edge performance on non‑ferrous materials; the Walter N‑grade approach focuses on low adhesion and consistent chip control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SDHT09T308-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the WK10 uncoated carbide grade, the G88 chipbreaker and the robust 0.8 mm corner radius for consistent milling performance and reduced rework. Order the SDHT09T308-G88 WK10 insert directly via Metav Werkzeuge or ask the consultants for cutting data and availability. SDHT09T308-G88 WK10 milling indexable insert — Walter Tools, square 90°, 15° clearance The SDHT09T308-G88 WK10 is a square, 90° milling indexable insert designed for general milling operations; it pairs an uncoated carbide grade with a controlled chipbreaker to support reliable chip formation and repeatable machining results. Uncoated carbide grade WK10 Square insert, 90° geometry 15° clearance angle for stable cutting 0.8 mm corner radius for robust edges G88 chipbreaker for controlled chips Stable performance through a proven carbide grade The open-series WK10 grade is an uncoated carbide formulation intended for broad workshop applications; its metallurgy promotes consistent cutting behaviour and predictable wear. The insert’s design reduces unexpected edge failures by combining a stable substrate with a conservative edge geometry, which supports longer intervals between indexings. Engineers and production planners will find the insert useful where reliable cycle times and low scrap rates are priorities, while the note to check the product matrix ensures material suitability is confirmed for specific workpiece alloys. Controlled chip flow and surface consistency Equipped with the G88 chipbreaker and a 15° clearance angle, the insert improves chip control in many common milling contexts. The chipbreaker directs segmented chips away from the cut, reducing the risk of recutting and tool chatter; the clearance angle contributes to lower friction at the tool–workpiece interface. These characteristics translate into more consistent surface quality and a reduced need for secondary finishing, which supports process efficiency and predictable throughput in series production. Robust geometry for versatile milling tasks The square 90° shape, 0.8 mm corner radius and T3 thickness create a balance between edge strength and form accuracy for typical shoulder milling and light slotting. The compact 09 size enables frequent indexing with minimal waste of unused cutting edge, while the H tolerance class ensures dimensional repeatability across batches. This geometry suits applications where edge robustness is required without sacrificing the ability to attain defined corner radii on the workpiece; the insert’s features make it a practical choice for workshops seeking steady, reproducible results. Contact Metav Werkzeuge for tailored cutting data, availability and a quotation for the SDHT09T308-G88 WK10 insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDHT09T308-G88-WK10-WALTER Designation: SDHT09T308-G88 WK10 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Insert shape: Square 90° Insert size: 09 Thickness: T3 Tolerance class: H Special features Grade: WK10 (uncoated carbide) Chipbreaker: G88 Series: Walter Schneidstoffsorte - Serie offen Execution: T Application note: Check product matrix for material suitability FAQ What materials is the insert suitable for? The SDHT09T308-G88 WK10 insert uses the WK10 uncoated carbide grade; material suitability should be verified against the product matrix to determine compatibility with specific steels, alloys or other workpiece materials. How does the G88 chipbreaker affect machining? The G88 chipbreaker on this insert promotes controlled chip formation and evacuation, which supports stable cutting and more consistent surface finish in many milling operations with the SDHT09T308-G88 WK10. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius gives a robust cutting edge that resists chipping during intermittent cuts while helping to achieve defined fillet radii on the workpiece when using the SDHT09T308-G88 WK10 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDHT09T308-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp uncoated carbide grade, optimised chip control and compact geometry for efficient milling of non‑ferrous materials; order original Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application support. SDHT09T308-G88 WXN15 milling indexable insert by Walter Tools — square 90°, 15° lead angle The SDHT09T308-G88 WXN15 is a square milling indexable insert designed for high‑quality machining of non‑ferrous metals, offering a 15° free angle and controlled chip formation in a compact T3 thickness. Square 90° geometry for versatile milling Sharp uncoated grade WXN15 for NE‑metals Chipbreaker G88 for optimised chip control 0.8 mm corner radius for consistent edge life Consistent, sharp cutting performance for non‑ferrous machining The insert is based on an uncoated carbide grade specifically formulated as WXN15 for non‑ferrous materials. This grade provides exceptionally sharp cutting edges and a low tendency for material adhesion, which reduces built‑up edge and improves surface quality when machining aluminium, copper and brass. The combination of a precise 15° free angle and a 0.8 mm corner radius helps maintain a predictable cutting geometry, translating into stable tool life and repeatable results in production runs. Geometry and chip control that simplify process setup The square 90° shape delivers four usable cutting edges per insert and supports a range of radial engagement angles. The integrated chipbreaker G88 promotes controlled chip segmentation with soft, continuous materials, reducing the risk of long, entangling chips and enabling higher feed rates. For workshop technicians and process engineers, these features mean fewer interruptions, easier chip evacuation and more consistent cycle times during milling operations. Technical advantages translated into economic benefits Using this indexable insert in a compatible milling cutter supports efficient material removal with low rework rates. The sharp, uncoated WXN15 grade is optimised for adhesion‑prone non‑ferrous alloys, which can lower the need for frequent edge dressing or premature replacement. In practical terms, this can improve overall process productivity and contribute to lower unit costs over extended production periods while keeping setup and handling straightforward. Application guidance and compatibility notes The insert is part of the Walter N‑grade system, intended for NE‑metal machining according to ISO group N. Its T3 plate thickness and compact format suit smaller diameters and shoulder or profile milling where tool stiffness and chip control are important. When selecting cutter bodies and clamping systems, ensure compatibility with the SDHT09T308‑style pocket and follow the machine‑specific recommendations for speeds and feeds with non‑ferrous materials to maximise performance. Contact Metav Werkzeuge for application advice, availability and to secure original Walter Tools inserts for reliable non‑ferrous milling via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SDHT09T308-G88-WXN15-WALTER Label: Fräswendeschneidplatte SDHT09T308-G88 WXN15 Walter Tools Manufacturer: Walter Tools Series: Walter N-Sortensystem Designation: SDHT09T308-G88 WXN15 Core specifications Free angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Materials & features Grade: uncoated carbide (WXN15) Chipbreaker: G88 Application group: Non‑ferrous metals (ISO N) Execution: T FAQ What materials is this insert best suited for? The SDHT09T308-G88 WXN15 insert is optimised for non‑ferrous metals such as aluminium, copper and brass, following the ISO group N designation for NE‑metals. Is the cutting grade coated or uncoated? The cutting grade WXN15 used in this indexable insert is uncoated carbide, chosen for its sharp edge and low tendency for material adhesion when machining soft, ductile alloys. How does the chipbreaker G88 affect milling of soft alloys? Chipbreaker G88 promotes controlled chip segmentation and evacuation in soft materials, reducing long stringy chips and improving process stability with the SDHT09T308-G88 WXN15 insert. What does the 15° free angle mean for cutting forces? A 15° free angle reduces rubbing at the tool flank and supports smoother entry into soft materials, helping to lower cutting forces and limit heat generation during operations with this insert. Can this insert be used for profile and shoulder milling? Yes; the square 90° geometry and 0.8 mm corner radius make the insert suitable for shoulder and profile milling where multiple indexable edges and reliable corner life are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDHT09T3AZN-G88 WK10 T Wendeplatten - Walter Tools
Combining uncoated carbide WK10 with a dedicated G88 chipbreaker and a 15° clearance angle ensures predictable chip formation and steady milling performance; order the insert directly via Metav Werkzeuge or consult the technical team for component-specific guidance. SDHT09T3AZN-G88 WK10 – Square 90° milling insert, 15° clearance – Walter Tools The SDHT09T3AZN-G88 WK10 is a square 90° milling insert designed for stable chip control in general milling applications, offering a T3 thickness for secure clamping and repeatable performance. Uncoated carbide grade WK10 Square 90° insert geometry 15° clearance angle for stable cutting Integrated G88 chipbreaker design Consistent chip control for improved productivity The combination of the G88 chipbreaker and the uncoated carbide grade is engineered to promote stable, predictable chip formation under a wide range of cutting conditions. The chipbreaker geometry reduces the risk of long, stringy swarf and helps maintain coolant access to the cutting edge, which can lead to fewer interruptions during long runs. As a result, cycle times are more consistent and tool-change intervals become easier to plan, supporting continuous production and improved process efficiency. Robust geometry that supports repeatable tool life A square 90° geometry paired with a 15° clearance angle and T3 thickness gives the insert a balance of edge strength and accessibility for a variety of milling strategies. The square shape provides four usable cutting edges, which optimises tool utilisation and minimises downtime for indexation. The modest clearance angle supports general-purpose engagement while reducing the risk of edge chipping in interrupted cuts. These geometric choices contribute to reliable, repeatable performance and simplified tool inventory management. Application guidance and verification of material suitability The insert is supplied in the Walter Tools material series and marked WK10, an uncoated cemented carbide; specific workpiece compatibility should be verified against the manufacturer’s product matrix before specifying for a new application. Where uncertainty exists about cutting data, feed rates or depth of cut, reference the technical matrix and consult the supplier’s application notes to select optimal cutting parameters. For bespoke machining tasks or unusual materials, the technical team at Metav Werkzeuge can assist with data sheets and cutting tests to confirm suitability. For reliable results with Walter Tools inserts such as the SDHT09T3AZN-G88 WK10, contact Metav Werkzeuge for application advice and availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: SDHT09T3AZN-G88-WK10-WALTER Designation: Fräswendeschneidplatte SDHT09T3AZN-G88 WK10 Walter Tools Manufacturer: Walter Tools Data Clearance angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: H Special features Grade: WK10 (uncoated carbide) Chipbreaker: G88 Series: Walter Schneidstoffsorte - Serie offen Execution: T ISO designation: SDHT09T3AZN-G88 WK10 FAQ What materials is this milling insert suitable for? Material suitability must be checked in the Walter Tools product matrix; the SDHT09T3AZN-G88 WK10 is an uncoated cemented carbide grade intended for general-purpose milling but requires verification against the specific workpiece. How does the G88 chipbreaker improve machining reliability? The G88 chipbreaker on the SDHT09T3AZN-G88 WK10 controls chip shape and evacuation, reducing swarf-related interruptions and supporting consistent surface finish and tool life. What does the square 90° geometry mean for cutting strategy? Square 90° geometry provides four usable edges per insert, allowing indexation for extended service life while offering strong cutting edges suitable for face and edge milling operations. Is the WK10 grade coated or uncoated and what does that imply? The WK10 designation denotes an uncoated carbide grade; it typically offers stable chip formation and is suitable where coatings are not required or where specific machining conditions prefer an uncoated substrate. How should cutting data be determined for this insert? Cutting data should be selected from the manufacturer’s recommendations and adapted using trial cuts; the SDHT09T3AZN-G88 WK10 requires parameter checks in the product matrix for optimal feed and speed settings. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not imply any affiliation. The offered item is an original, factory-new product of the manufacturer.
SDHT09T3AZN-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Benefit from the combination of a sharp, uncoated carbide grade and a proven chipbreaker geometry for efficient, low‑adhesion machining of non‑ferrous alloys; order the SDHT09T3AZN‑G88 WXN15 milling insert directly via Metav Werkzeuge or contact our advisors for application advice. SDHT09T3AZN‑G88 WXN15 — milling insert, square 90° form, for non‑ferrous metals by Walter Tools A SDHT09T3AZN‑G88 WXN15 milling insert designed for sharp, uncoated cutting in high‑productivity milling of non‑ferrous metals such as aluminium, copper and brass. Square 90° form for stable indexing Sharp uncoated carbide grade WXN15 15° clearance angle for clean shearing G88 chipbreaker for non‑ferrous materials Precision performance for non‑ferrous production The insert delivers reliable chip control and consistent results in machining non‑ferrous alloys. Its WXN15 uncoated carbide composition provides the sharp edge geometry required for minimal material adhesion, which is critical when working with aluminium, copper or brass. The G88 chipbreaker reduces folding and built‑up edge formation, so cycle times remain predictable and surface finish quality improves. For production environments where tool indexing and repeatability matter, the square 90° form contributes to stable clamping and repeatable positioning, supporting fast tool changes and consistent component tolerances. Efficient cutting geometry that reduces rework With a 15° clearance angle and a compact plate thickness of T3, the geometry is optimised to produce clean shear in soft, ductile materials while limiting heat generation at the cutting zone. The sharp, uncoated cutting edge is particularly suited to finishing and semi‑finishing passes where burr formation must be minimised. Integrating this grade into machining routines often reduces downstream deburring and inspection time, improving overall throughput. Where finishing standards are tight, the combination of the chipbreaker design and the sharp edge helps maintain surface integrity across repeated tool indexes. Practical integration and predictable handling in milling systems Belonging to the Walter N‑Sortensystem, the insert matches common pocket designs for square 90° plates and is available in the SDHT09T3AZN‑G88 designation for straightforward identification within tool inventories. The tolerance class H ensures consistent dimensional compliance for high‑precision setups. Using an insert with a proven chip control geometry simplifies process planning: feeds and speeds can be tuned to favour material evacuation rather than excessive cutting force, reducing the risk of tool vibration and improving tool life. For workshops aiming for reproducible results on non‑ferrous workpieces, this insert supports a measurable rise in process stability. For machining non‑ferrous alloys with confidence, contact Metav Werkzeuge to check availability of the SDHT09T3AZN‑G88 WXN15 insert or to request specific application guidance — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: SDHT09T3AZN-G88-WXN15-WALTER Name: SDHT09T3AZN‑G88 WXN15 Manufacturer: Walter Tools Product type: milling insert Facts Free angle: 15° Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: H Special features Series: Walter N‑Sortensystem Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Application: Non‑ferrous metals (aluminium, copper, brass) Execution: T FAQ Is this insert suitable for aluminium milling operations? The SDHT09T3AZN‑G88 WXN15 insert is designed expressly for non‑ferrous metals and is well suited to aluminium machining thanks to its sharp, uncoated carbide grade and G88 chipbreaker. Can the insert handle brass and copper components? Yes, the WXN15 grade and the G88 chip control geometry are intended to minimise adhesion when machining brass and copper, supporting improved surface finish and fewer tool‑related marks. What are the key geometric advantages of the plate? The square 90° form and 15° clearance angle combine to provide stable indexability and clean shearing action, which reduces burr formation and enhances repeatability in serial machining. How is the insert identified for inventory and tool planning? The product appears as SDHT09T3AZN‑G88 WXN15 and belongs to the Walter N‑Sortensystem, making it straightforward to match with compatible tool holders and indexing schemes. Does the insert require a coating for these applications? This insert is an uncoated carbide grade (WXN15), chosen to maintain a very sharp cutting edge and avoid coating‑related adhesion in non‑ferrous material machining. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDHT120408-G88 WK10 Wendeplatten - Walter Tools
Take advantage of a cost-efficient combination of uncoated cemented carbide WK10 and a G88 chipbreaker for reliable chip control and steady productivity; the square 12 mm format with a 0.8 mm corner radius provides predictable edge life and consistent surface quality—order the insert via Metav Werkzeuge or consult the team for application matching. SDHT120408-G88 WK10 — Fräswendeschneidplatte (square 12 mm, 0.8 mm radius) by Walter Tools The SDHT120408-G88 WK10 is a square milling indexable insert for versatile finishing and semi-finishing operations, engineered for stable chip formation and economical machining. Uncoated cemented carbide WK10 grade 12 mm square with 0.8 mm corner radius 15° relief angle for versatile engagement G88 chipbreaker for controlled chips Stable results from a robust carbide grade The insert uses the WK10 uncoated cemented carbide grade, designed for broad applicability where an economical, reliable cutting edge is required. The choice of an uncoated grade delivers consistent performance across varied tasks and supports predictable wear progression. For production environments looking to balance cost and tool life, the WK10 grade enables dependable cutting behaviour and stable chip formation, reducing downtime for tool changes and simplifying process planning. Precision geometry for repeatable finishes With a 12 mm square form and a 0.8 mm corner radius, the geometry supports accurate shoulder milling and controlled step-downs. The 15° relief angle reduces cutting forces at engagement while preserving edge strength, which helps maintain surface integrity during finishing passes. The square 90° shape offers multiple indexed edges, allowing economical reuse of the insert when edges are rotated; this provides a clear advantage in workshops where repeatability and tool rotation strategy matter. Controlled chips and improved process security The G88 chipbreaker is designed to produce small, manageable chips under typical milling parameters, which improves evacuation and reduces the risk of re-cutting. Better chip control contributes directly to process security, surface quality and machine uptime. The insert’s configuration supports stable cutting in a variety of setups; however, final workpiece suitability should be verified against the manufacturer’s product matrix to ensure optimal parameter selection and coolant strategy for each material group. Practical integration and application guidance The insert is supplied in the ISO designation SDHT120408-G88 WK10 and carries a thickness code of 04 and tolerance class H. Its series designation indicates an open Walter carbide family; this aids selection for users who require traceable material and production standards. If material compatibility or cutting data are unclear, Metav Werkzeuge’s technical advisors can help determine optimal cutting speeds and feeds or suggest an alternative grade or geometry for specific tasks. For fast clarification, provide the ISO designation or SKU when enquiring. Contact Metav Werkzeuge for tailored application advice and ordering of Walter Tools inserts—quote SKU SDHT120408-G88-WK10-WALTER when requesting cutting data or a cutting-edge recommendation. Technical Data Article number: SDHT120408-G88-WK10-WALTER Name: Fräswendeschneidplatte SDHT120408-G88 WK10 Manufacturer: Walter Tools Core specifications Relief angle: 15° Corner radius: 0.8 mm Size: 12 mm Thickness code: 04 Tolerance class: H Features & materials Grade: WK10 (uncoated cemented carbide) Chipbreaker: G88 Shape: Square 90° Series: Walter Schneidstoffsorte - Serie offen Article designation: SDHT120408-G88 ISO designation: SDHT120408-G88 WK10 Material: Catalogue-dependent Application note: Check product matrix for workpiece suitability FAQ What materials is this insert suited for? The SDHT120408-G88 WK10 is based on an uncoated cemented carbide grade; material suitability must be checked in the product matrix to confirm optimal application for specific alloys or material conditions. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes short, controllable chips, improving evacuation and surface finish; this reduces the likelihood of recutting and supports longer uninterrupted cycles with the SDHT120408-G88 WK10 insert. How many usable cutting edges does the square insert provide? The square 90° form typically offers four indexable cutting edges, allowing economical rotation of the insert to extend overall tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners. Trademarked names are used solely for explanation; no affiliation between our company and the mentioned brands is implied.
SDHT120408-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the sharp, uncoated WXN15 grade and the optimised G88 chipbreaker for consistently clean machining of non‑ferrous alloys; order or request technical advice from Metav Werkzeuge for fast integration into existing tool stocks. SDHT120408-G88 WXN15 — Milling insert for non‑ferrous metals — Walter Tools SDHT120408-G88 WXN15 is a square milling insert designed for efficient profiling and face milling of non‑ferrous materials with a 15° free angle Uncoated carbide grade WXN15 for non‑ferrous metals Sharp edge geometry to reduce material adhesion G88 chipbreaker for fine, controllable chips 15° free angle and 0.8 mm corner radius High performance for non‑ferrous machining The SDHT120408-G88 WXN15 indexable insert combines an uncoated cemented carbide substrate with a sharp cutting edge geometry to minimise built‑up edge when machining aluminium, copper and brass. The result is reduced burr formation and improved workpiece quality, which translates into less downstream finishing and lower rework costs. The WXN15 grade is optimised for NE materials, providing a reliable compromise between edge sharpness and tool life. Controlled chips and consistent surface finish A dedicated G88 chipbreaker produces short, manageable chips even at moderate depths of cut; this leads to safer evacuation in multi‑pass operations and a more uniform surface finish. The combination of the 0.8 mm corner radius and the 15° free angle promotes stable engagement with the workpiece, reducing vibration and the risk of edge collapse. Explaining the chipbreaker: it alters the flow of material ahead of the edge so chips curl and break, improving process stability and reducing the chance of workpiece damage. Series compatibility and process reliability Belonging to the Walter N‑series, the insert follows common geometrical conventions for square 90° formats and tolerance class H, simplifying tool holder selection and replacement. The compact dimensions and the standard thickness code facilitate stocking and machine changeover, supporting predictable cycle times. For application guidance or to confirm suitability for a specific alloy, Metav Werkzeuge provides technical consulting; customers can request machining data or compatibility checks via email or phone. Contact Metav Werkzeuge for availability and tailored application advice on the Walter Tools SDHT120408‑G88 WXN15 milling insert — call +49 2822 7131930 or email info@metav-werkzeuge.com for direct assistance. Technical data Article number: SDHT120408-G88-WXN15-WALTER Label: Fräswendeschneidplatte SDHT120408-G88 WXN15 Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 0.8 mm Plate size: 12 Plate thickness code: 04 Tolerance class: H Special features Grade: WXN15 (uncoated cemented carbide) Chipbreaker: G88 Plate form: Square 90° Series: Walter N‑Sortensystem Edge geometry: sharp, adhesion‑reducing Execution: T Material application: Non‑ferrous metals (aluminium, copper, brass) FAQ What materials is this insert suitable for? This insert is specified for non‑ferrous metals; the SDHT120408‑G88 WXN15 is designed primarily for aluminium, copper and brass. Is the insert coated or uncoated? The WXN15 grade used in this insert is uncoated cemented carbide, chosen to preserve a sharp edge and minimise material adhesion on NE alloys. How does the G88 chipbreaker affect machining? The G88 chipbreaker generates fine, controllable chips that improve evacuation and surface finish, which is especially beneficial when machining softer, ductile materials. Will the insert fit standard square 90° tool holders? The square 90° form factor and the Walter N‑series dimensions allow this insert to be mounted in compatible standard holders, streamlining replacement and tool management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDHT1204AZN-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control and durable uncoated carbide performance to maintain a steady production flow; order the inserts through Metav Werkzeuge or consult their specialists for application support. SDHT1204AZN-G88 WK10 milling insert, square 90° with 15° relief – Walter Tools The SDHT1204AZN-G88 WK10 is a square milling insert intended for general milling applications, combining a G88 chipbreaker with the WK10 uncoated carbide grade for consistent chip formation and stable cutting performance. WK10 uncoated carbide grade Square 90° form for robust milling G88 chipbreaker for controlled chips 15° relief angle for secure cutting Stable chip control for uninterrupted production The geometry and chipbreaker of this indexable insert are designed to promote predictable chip formation and minimise interruptions. The combination of the G88 chipbreaker with a square geometry yields short, manageable chips under many milling conditions, which reduces the risk of re-cutting and improves machine uptime. In practice, this means fewer manual interventions at the machine and a smoother process flow, supporting higher overall throughput and more consistent cycle times. Material grade explained for pragmatic process decisions The insert is supplied in the WK10 uncoated carbide grade, which is an economical option when a robust cutting edge and cost-effective performance are required. As an uncoated grade, WK10 provides straightforward tool behaviour at moderate cutting speeds and can be preferable where coating sensitivity is an issue. Process engineers should refer to the product matrix to confirm suitability for specific workpiece materials and cutting parameters; this step ensures the chosen grade aligns with the required productivity and component quality targets. Geometry and handling that support repeatable accuracy With a square 90° plate form and a 15° relief angle, the insert offers a stable cutting edge and clear seating orientation in indexable toolholders. The thickness code and size code indicate the standard insert proportions for secure clamping and predictable strength at the cutting edge. The tolerance class H contributes to consistent mounting accuracy and repeatability across multiple indexings, which is important for maintaining surface quality and dimensional stability during serial production. Overall, the geometry supports robust face and peripheral milling where a firm edge and reliable chip evacuation are priorities. For application advice or to source Walter Tools SDHT1204AZN-G88 WK10 inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SDHT1204AZN-G88-WK10-WALTER Product type: milling insert Designation: SDHT1204AZN-G88 WK10 Facts Size code: 12 Thickness code: 04 Relief angle: 15° Plate form: Square 90° Tolerance class: H Special features Grade: WK10 (uncoated carbide) Chipbreaker: G88 Series: Walter grade series - open Execution: T Label: SDHT1204AZN-G88 WK10 FAQ What materials is this insert intended for? The SDHT1204AZN-G88 WK10 milling insert is supplied in the WK10 uncoated carbide grade; suitability for specific materials should be verified against the product matrix before selection. Is the chipbreaker suitable for heavy chip loads? The G88 chipbreaker is designed for controlled chips and improved evacuation, contributing to stable performance under many milling conditions with consistent chip removal. Can these inserts be indexed to extend tool life? Yes, the square 90° form and tolerance class H support safe indexing and repeatable seating, which helps to maximise usable edges and reduce tooling costs. Does the insert have a coating? This product is specified in the WK10 uncoated carbide grade and does not include a surface coating as delivered. How does the 15° relief angle affect cutting performance? A 15° relief angle provides a compromise between edge strength and clearance, offering secure cutting action while reducing rubbing at the flank face for improved surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and Walter Tools. The offered item is original, brand-new goods of the manufacturer.
SDHT1204AZN-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated carbide grade (WXN15), G88 chipbreaker and a stable square 90° geometry to achieve clean chips and reliable results when machining non‑ferrous metals; order genuine Walter Tools inserts or consult Metav Werkzeuge for application support. SDHT1204AZN‑G88 WXN15 – milling indexable insert for non‑ferrous metals, Walter Tools The SDHT1204AZN‑G88 WXN15 is a square milling indexable insert engineered for sharp, uncoated cutting in non‑ferrous materials such as aluminium and brass, offering a precise combination of edge geometry and chip control for productive machining. Sharp uncoated carbide grade WXN15 G88 chipbreaker for clean chips Square 90° insert, 12 mm size 15° clearance angle for precision cuts High‑performance cutting for non‑ferrous materials The WXN15 grade is an uncoated carbide formulated for machining non‑ferrous metals. Its very sharp cutting edge reduces built‑up edge and minimises material adhesion during high‑quality finishing. In practice, this means fewer interruptions for edge cleaning and a consistently better surface finish when producing components from aluminium, copper or messing (brass). The combination of a sharp grade and the Walter N series geometry supports efficient material removal while maintaining dimensional stability over repeated indexing. Consistent chip control and improved surface quality The G88 chipbreaker is designed to break chips reliably on short to medium chip forms typical for non‑ferrous materials. Controlled chip formation lowers the risk of entanglement and protects both the workpiece and the toolholder. As a result, the cutter system produces fewer micro‑defects, contributing to repeatable surface roughness and reduced rework. For shops seeking predictable outcomes, the chip geometry translates into smoother process behaviour and less downtime due to chip management. Stable geometry for accurate shoulder and face milling The square 90° form and 15° clearance angle provide a robust edge for shoulder milling and face operations where a decisive corner or flat wall is required. The insert’s 12 mm size and 4 mm thickness ensure sufficient edge strength while allowing indexability for rapid turnaround when an edge is worn. This geometry balances rigidity and accessibility, so finishing passes remain accurate and vibration is minimised, delivering consistent dimensional results even in high‑productivity setups. Practical integration and recommended applications This insert is best applied in finishing and sharp‑edge operations on non‑ferrous alloys within the Walter N series system. The uncoated, sharp grade performs well under moderate chip loads and benefits from appropriate coolant or air blast to evacuate chips in deep pockets. For integration into existing toolholders, confirm seat compatibility with the SDHT designation and the G88 chip geometry. For specific cutting data and optimal setup parameters, Metav Werkzeuge can provide tailored recommendations based on the exact machine and material combination. For application support or to procure authentic Walter Tools SDHT1204AZN‑G88 WXN15 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SDHT1204AZN-G88-WXN15-WALTER Label: Fräswendeschneidplatte SDHT1204AZN-G88 WXN15 Walter Tools Manufacturer: Walter Tools Product type: milling indexable insert Core specifications Insert size: 12 mm Thickness: 4 mm Clearance angle: 15° Insert shape: Square 90° Chipbreaker: G88 Grade: WXN15 Materials & special features Uncoated carbide (WXN15) Suitable for non‑ferrous metals (ISO group N) Series: Walter N series Execution: T FAQ Which materials are best suited to this insert? The WXN15 grade insert is optimised for non‑ferrous metals such as aluminium, copper and brass; the SDHT1204AZN‑G88 WXN15 excels where sharp, uncoated cutting is required. Is the insert coated? No, the insert is uncoated; WXN15 denotes an uncoated carbide grade designed for sharp performance on non‑ferrous materials. What does the G88 chipbreaker do? The G88 chipbreaker controls chip formation to produce short, manageable chips, improving evacuation and protecting the workpiece surface during milling. How does the square 90° geometry affect machining? The square 90° shape provides strong corner support for shoulder and face milling, enabling precise walls and robust engagement in finishing operations. What should be considered when integrating the insert into a toolholder? Confirm seat compatibility with the SDHT designation and check that the toolholder supports the G88 chip geometry; Metav Werkzeuge can advise on matching holders and process parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SDHX09T3AZR-A88 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of targeted geometry, reliable chip control and a carbide grade optimised for non‑ferrous alloys to increase machining efficiency and surface quality; order this insert directly via Metav Werkzeuge or consult our specialists for application support. SDHX09T3AZR-A88 WAK15 — indexable milling insert for aluminium by Walter Tools SDHX09T3AZR-A88 WAK15 is an indexable milling insert designed for high‑shear machining of aluminium and other non‑ferrous metals, featuring a square 90° form and a dedicated A88 chipbreaker SDHX09T3AZR-A88 WAK15 — uncoated carbide for aluminium 15° relief with square 90° insert geometry A88 chipbreaker for secure chip control Designed for high shear, non‑ferrous machining Higher throughput through dedicated geometry and chip control The insert delivers measurable productivity benefits thanks to the A88 chipbreaker and a cutting geometry tailored to aluminium. The combination of a sharp cutting edge and a low‑adhesion grade reduces material buildup and allows for sustained cutting engagement, which improves cycle times and reduces secondary operations. The uncoated WAK15 carbide grade is specified for high shear and minimal edge deterioration when machining soft, ductile materials, supporting stable cutting even in long runs. Improved component quality with controlled shearing action A square 90° form together with a 15° relief produces a clean shearing action that reduces burr formation and enhances the finished surface. This geometry supports predictable tool engagement and consistent part tolerances, which is particularly important for visible or mating surfaces. The insert’s design helps prevent built‑up edge on aluminium alloys, resulting in more consistent dimensional accuracy and a better surface finish with fewer secondary finishing steps required. Consistent performance and easy spindle integration Built to the Walter N‑Series standards, the insert meets a tight tolerance class H and a T3 thickness that together ensure repeatable seating and secure clamping in standard milling cutters. The robust format and execution code X support consistent indexability and long‑term repeatability across production batches, reducing tool change frequency and setup time. Uncoated carbide performs predictably in non‑ferrous applications and can be a simple, cost‑effective solution where anti‑adhesive coatings are not required. Practical applications and machining advice for non‑ferrous alloys The insert is suitable for aluminium, copper, brass and similar non‑ferrous alloys where sharp edges and reliable chip evacuation are priorities. For best results, combine the insert with appropriate coolant or air blast and select cutting parameters that favour high shear and moderate feed per tooth to avoid vibration. If specific cutting data is required for particular aluminium grades or workholding setups, technical consultation is available to adapt feeds and speeds to the machining centre and cutter diameter. Contact Metav Werkzeuge for tailored cutting parameters and procurement of Walter Tools SDHX09T3AZR-A88 WAK15 indexable inserts for aluminium and non‑ferrous machining Technical Data SKU: SDHX09T3AZR-A88-WAK15-WALTER Designation: SDHX09T3AZR-A88 WAK15 Manufacturer: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 Product type: Indexable milling insert (milling insert) Facts Relief angle: 15° Insert shape: Square 90° Insert size: 09 Thickness: T3 Tolerance class: H Special features Uncoated carbide grade for non‑ferrous metals Chipbreaker: A88 Execution: X Application: Aluminium and non‑ferrous metals FAQ What materials is this insert designed for? The SDHX09T3AZR-A88 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals; the WAK15 grade and A88 chipbreaker are optimised to reduce adhesion and improve chip control in these materials. Is this an uncoated or coated grade? This insert uses an uncoated carbide grade (WAK15), chosen for its sharp cutting characteristics and suitability for high‑shear non‑ferrous machining. How does the A88 chipbreaker affect machining? The A88 chipbreaker shapes chip formation to provide short, controllable chips that evacuate reliably, reducing the risk of recutting and improving machining stability on aluminium alloys. Can the insert be used in standard milling cutters? Yes, the square 90° form and T3 thickness conform to standard indexable insert geometries and seatings; tolerance class H supports consistent clamping and repeatable indexing. Does this insert require specific coolant or cutting strategies? For best performance on aluminium, a combination of effective chip evacuation—air blast or through‑tool coolant where applicable—and parameter tuning for high shear is recommended; Metav Werkzeuge can advise on exact feeds and speeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com