SDGT06T2PDR-D57 WSM35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a WSM35G grade for tough alloys and stainless steels, and a square 90° geometry with 15° clearance to improve process reliability and tool life; order or request advice via Metav Werkzeuge if further clarification is needed. SDGT06T2PDR-D57 WSM35G milling indexable insert by Walter Tools — Tiger‑tec Gold, 15° clearance The SDGT06T2PDR-D57 WSM35G is a square 90° milling insert engineered for heavy-duty cutting of stainless steels and heat‑resistant superalloys, delivering stable chip formation and extended edge life. *Tiger‑tec Gold coating for superior wear resistance *Optimised for stainless steels and superalloys *Square 90° geometry with 15° clearance *Stable cutting edge with D57 chipbreaker Reliable performance in hard‑to‑machine materials The coated carbide grade WSM35G, part of the Tiger‑tec Gold series, is formulated for demanding materials where heat and work‑hardening challenge conventional grades. The combination of a robust substrate and advanced coating results in improved wear resistance and more consistent tool life when machining rostfreier Stahl and nickel‑based superalloys. This leads to fewer tool changes, reduced machine downtime and a more predictable production rhythm — clear advantages for batch and continuous manufacturing environments. Geometry and chip control that protect the edge A square 90° form paired with a 15° clearance angle and the D57 chipbreaker provides mechanical strength and controlled chip formation during milling operations. The geometry reduces cutting edge engagement per pass while maintaining cutting stability, which is particularly beneficial when confronting the adhesion and high temperatures typical of stainless steels. The chipbreaker design promotes short, manageable chips, lowering the risk of re‑cutting and improving surface finish without sacrificing productivity. Application guidance for process efficiency Specified for groups M (stainless steels) and S (heat‑resistant superalloys and titanium alloys), this insert supports a range of challenging applications. Where thermal loads and material toughness are high, the WSM35G grade helps maintain a stable cutting edge and consistent performance. Select cutting parameters and coolant strategies aligned with material and machine capability to exploit the insert’s strengths: the outcome is higher throughput with fewer interruptions and more reproducible component quality. Industrial tolerance and build quality for repeatable results Manufactured to tolerance class G and available in size 06 with thickness T2, this insert meets industrial demands for interchangeability and precision. The coated hardmetal construction and Walter Tools’ production standards ensure repeatable performance across batches, enabling predictable fixture and programme settings on production machines. For operations focused on process security and long tool life, the combination of geometry, grade and coating offers a pragmatic balance between durability and cutting capability. For technical quotations, to discuss suitability for a specific application, or to request cutting data for this Walter Tools milling insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge provides application advice and product availability information Technical Data Article number: SDGT06T2PDR-D57-WSM35G-WALTER Name: SDGT06T2PDR-D57 WSM35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Facts Geometry: Square 90° Clearance angle: 15° Size: 06 Thickness: T2 Tolerance class: G Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: D57 Material suitability: rostfreier Stahl (M), heat‑resistant superalloys / titanium (S) Execution: T FAQ Which materials is this insert optimised for? The SDGT06T2PDR-D57 WSM35G milling indexable insert from Walter Tools is optimised for rostfreier Stahl (stainless steels) and heat‑resistant superalloys (ISO groups M and S), aiming for secure chip formation under thermal stress. What is the advantage of the Tiger‑tec Gold series for this insert? Tiger‑tec Gold coating on the WSM35G grade increases resistance to abrasive and adhesive wear, which helps the insert maintain a sharper edge for longer during demanding milling tasks. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes short, controllable chips and supports a consistent surface finish while reducing the likelihood of chip entanglement and re‑cutting, benefiting cycle‑time stability. Is this insert suitable for high‑temperature alloys such as titanium? Yes — the WSM35G grade is intended for metal groups that include heat‑resistant alloys and titanium, offering enhanced edge stability when machining these thermally challenging materials. What measurements and tolerances apply to the insert? The insert is size 06, thickness T2, square 90° with a 15° clearance angle, produced to tolerance class G for industrial interchangeability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
SDGT06T2PDR-D57 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and a 15° relief angle delivers stable cutting performance and long tool life for a wide range of materials. Procure the insert through Metav Werkzeuge or request application advice from their technical team for efficient integration into production. SDGT06T2PDR-D57 WSP45G Milling Insert – Tiger‑tec Gold PVD, 15° relief (Walter Tools) SDGT06T2PDR-D57 WSP45G is a square 90° milling insert designed for demanding milling applications in steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD for enhanced edge life 15° relief angle for secure chip formation Square 90° form for robust milling operations Suitable for steel, stainless and superalloys Longer service life through advanced coating and grade The Tiger‑tec Gold technology paired with the WSP45G grade provides a PVD‑coated carbide solution engineered for predictable tool life in milling. The combination of a tough substrate and a wear‑resistant coating reduces flank wear and supports stable cutting across the life of the insert. For operations with frequent tool changes, this stability contributes directly to fewer interventions and more consistent production output. The specification targets the typical thermal and mechanical stresses encountered when machining steel, stainless steel and superalloys, enabling longer intervals between indexings and fewer unexpected stoppages on the shop floor. Improved chip control and cutting security for tough materials The geometry with its chipbreaker D57 and 15° relief angle promotes controlled chip formation and evacuation, which is essential when machining sticky or heat‑sensitive materials. The square 90° form gives a robust cutting corner that resists edge chipping under interrupted cuts and heavy engagement. As a result, surface finish quality benefits from consistent cutting forces and a reduced tendency for built‑up edge. These performance aspects make the insert particularly suitable for finishing and semi‑finishing passes where dimensional stability and repeatability are required. Predictable integration and production benefits in the workshop With a thickness of T2, size designation 06 and tolerance class G, the insert is manufactured to standards that support predictable seating and repeatability in compatible tool holders. The indexable design shortens maintenance windows because worn edges can be rotated or replaced without removing the entire cutter body, improving overall equipment availability. Specification and material coverage reduce the need for multiple specialised grades, simplifying inventory management and supporting efficient process planning. If clarification on compatibility or cutting parameters is required, Metav Werkzeuge provides targeted advice and technical data to assist with straightforward implementation. For application guidance or to request supply of Walter Tools inserts with Tiger‑tec Gold technology contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 for fast, expert support Technical Data Article number: SDGT06T2PDR-D57-WSP45G-WALTER Designation: SDGT06T2PDR-D57 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Type: Milling insert Facts Relief angle: 15° Insert form: Square 90° Insert size: 06 Thickness: T2 Tolerance class: G Special features Coating: Tiger‑tec Gold (PVD) Chipbreaker: D57 Material application: Steel (P), Stainless steel (M), Superalloys / Titanium (S) Substrate: Coated cemented carbide FAQ Which materials is this insert suitable for? The WSP45G grade is formulated for milling steel, stainless steel and superalloys/Titanium, so the SDGT06T2PDR‑D57 WSP45G insert handles a broad material spectrum in standard milling operations. Why is the 15° relief angle important? A 15° relief angle reduces rubbing at the flank and supports stable cutting engagement, lowering friction and helping to avoid built‑up edge when machining tougher alloys. How does the chipbreaker D57 affect machining? The D57 chipbreaker promotes reliable chip control and evacuation, improving surface finish and reducing the risk of recutting or chip entanglement during continuous and interrupted cuts. What does the tolerance class G mean for workshop use? Tolerance class G indicates consistent manufacturing tolerances for repeatable seating in compatible toolholders, which supports predictable indexing and dimensional stability in production. Is the coating PVD and what benefits does it bring? Yes; the Tiger‑tec Gold is a PVD coating that enhances wear resistance and thermal stability, extending edge life and improving process reliability with Walter Tools inserts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT09T3AEN-F57 WKP25S Wendeplatten - Walter Tools
Combining the WKP25S grade with the Tiger·tec Silver coating ensures long tool life and reliable chip control in steel and cast iron machining; order the SDGT09T3AEN-F57 WKP25S directly via Metav Werkzeuge or ask our consultants for tailored application advice. SDGT09T3AEN-F57 WKP25S milling insert (square 90°, 15°) — Walter Tools A SDGT09T3AEN-F57 WKP25S milling insert engineered for productive machining of steel and cast iron, offering the wear resistance of the Tiger·tec Silver series in a square 90° geometry. Tiger·tec Silver coating for long tool life Grade WKP25S optimised for steel and cast iron Square 90° geometry with 15° relief F57 chipbreaker for stable chip control High-performance grade and coating for consistent productivity The combination of the Tiger·tec Silver series and the WKP25S grade provides a robust solution for demanding milling operations. The coated cemented carbide composition is designed to resist abrasive wear common when cutting cast materials and to manage the thermal loads encountered with steel, resulting in extended tool life and more predictable tool-change intervals. This engineered balance between toughness and wear resistance promotes steady productivity and reduces process interruptions in series production. Geometry and chip control that improve surface quality and stability Designed as a square 90° insert with a 15° free angle, this indexable insert delivers secure edge position and consistent engagement in milling passes. The F57 chipbreaker assists in producing short, controlled chips, which lowers vibration and helps maintain machining stability—particularly important when working with interrupted cuts in cast iron. The T3 thickness ensures sufficient edge strength for heavy cuts while retaining good surface finish capability. These features together support repeatable results and minimise rework. Application-focused benefits for workshop and production environments Optimised for machining steel and cast iron, the insert offers a straightforward route to increased throughput and machine uptime. The square geometry enables four usable cutting edges per indexable element, improving economy per edge change. In practice, this translates to fewer insert replacements and reduced handling time. The design is suitable for a wide range of milling strategies, from roughing to semi-finishing, and supports confidence in process planning thanks to predictable wear behaviour and chip formation. Contact Metav Werkzeuge for specific process recommendations on Walter Tools inserts and to arrange delivery or technical consultation Technical Data Article number: SDGT09T3AEN-F57-WKP25S-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Silver Grade: WKP25S Facts Free angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Chipbreaker: F57 Tolerance class: G Special features Coating/series: Tiger·tec Silver Material suitability: P / K (steel and cast iron) Geometry: square insert, 90° cutting edge Application: milling operations, roughing to semi-finishing FAQ What materials is this insert designed for? The SDGT09T3AEN-F57 WKP25S insert is designed primarily for steel (P) and cast iron (K) applications, matching the capabilities of the Tiger·tec Silver grade. How does the F57 chipbreaker affect machining? The F57 chipbreaker on the insert promotes short, controlled chips which improves machining stability and surface quality when milling cast iron and steel. How many cutting edges are available per insert index? With a square 90° form, the insert provides four indexable edges, improving economy per insert compared with single-edge solutions. Is this insert suitable for heavy roughing passes? The T3 thickness and the robust WKP25S grade provide sufficient edge strength for heavy cuts while maintaining good wear resistance for continuous operation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation with our company. The offered article is original, brand-new goods from the manufacturer Walter Tools.
SDGT09T3AEN-F57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver wear protection and the WKP35S grade for consistent tool life and reliable chip control; order the insert directly via Metav Werkzeuge or consult our specialists for application support. SDGT09T3AEN-F57 WKP35S T — Milling insert (Square 90°, 15° relief) by Walter Tools The SDGT09T3AEN-F57 WKP35S is a square 90° milling insert engineered for productive machining of Stahl and Gusseisen in a range of milling operations. Tiger·tec Silver coating for high wear resistance Optimised chipformer F57 for stable chip control 15° relief angle for predictable cutting geometry Square 90° insert, size 09, thickness T3 Enhanced productivity through durable coating and grade The combination of Tiger·tec Silver coating and the WKP35S grade provides a high level of abrasion resistance and thermal stability, which translates into longer tool life and fewer insert changes. For cutters used on Stahl and Gusseisen, this coating technology reduces flank wear and preserves the cutting edge under cyclic thermal loads. As a result, process reliability is improved and machine downtime is reduced — beneficial for shops aiming to raise effective machining hours without compromising surface quality. The milling insert design supports consistent performance across typical shop conditions. Stable chip control for safer, faster machining With the chipformer F57 and a 15° relief angle, this insert promotes predictable chip formation and evacuation when machining mixed batches of Stahl and Gusseisen. The chipformer geometry controls chip flow to prevent re-cutting and minimise built-up edge, which helps maintain cutting forces within expected limits and protects the toolholder and spindle bearings. Stable chip behaviour enables the use of slightly more aggressive parameters where appropriate, improving material removal rates while maintaining surface integrity. Robust geometry for repeatable component quality The Square 90° shape combined with size 09 and thickness T3 offers a strong cutting edge suitable for both general-purpose face and shoulder milling. The geometry ensures edge strength at the corner, making the insert tolerant to interrupted cuts and variable engagement. Tolerance class G supports reproducible seating in toolholders, which simplifies indexation and reduces setup variation. The insert's design therefore contributes to consistent part dimensions and repeatable surface finishes across production batches. Application scope and process benefits Belonging to the Tiger·tec Silver series and specified as WKP35S, this insert is intended for machining tasks where wear resistance and process stability are priorities. Its material suitability includes Stahl (ISO group P) and Gusseisen (ISO group K), covering a broad range of workshop applications. Selection of cutter bodies and appropriate cutting data will determine the exact balance between productivity and finish; when aligned, the result is fewer tool changes, reduced cycle times and higher shop throughput. For complex or mixed-material programmes, the insert offers a reliable baseline for standardisation. For tailored application advice on the Walter Tools SDGT09T3AEN-F57 WKP35S milling insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for precise recommendations and cutting data Technical Data Article number: SDGT09T3AEN-F57-WKP35S-WALTER Facts Size: 09 Thickness: T3 Relief angle: 15° Tolerance class: G Shape: Square 90° Special features Coating: Tiger·tec Silver Grade: WKP35S Chipformer: F57 Material compatibility: P / K (Stahl, Gusseisen) Series: Tiger·tec Silver FAQ What materials is this insert suitable for? The SDGT09T3AEN-F57 WKP35S insert from Walter Tools is specified for machining Stahl (ISO group P) and Gusseisen (ISO group K), covering a wide range of steels and cast irons. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade improves abrasion resistance and thermal stability, so the insert maintains cutting-edge integrity for longer and supports more consistent production. What role does the F57 chipformer play? The chipformer F57 controls chip shape and evacuation, reducing the risk of re-cutting and enabling more stable cutting conditions, which helps maintain surface quality and protects tool components. Is the 15° relief angle suitable for heavy cuts? The 15° relief angle provides a predictable cutting geometry and good edge support; suitability for heavy cuts depends on cutter body stiffness and chosen cutting parameters rather than the relief angle alone. How does the square 90° geometry affect application choice? A Square 90° insert offers strong corner edges and versatility for face and shoulder milling; size 09 and thickness T3 provide a robust profile that tolerates interrupted cuts and varying engagement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
SDGT09T3AEN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold wear resistance and the WSM35G grade to extend tool life while maintaining consistent surface quality; the 15° relief and optimised chipbreaker F57 deliver secure cutting in demanding materials. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. SDGT09T3AEN-F57 WSM35G — indexable milling insert, Tiger·tec Gold, 15° relief (Walter Tools) A high-performance indexable milling insert, the SDGT09T3AEN-F57 WSM35G is designed for productive machining of rostfreie Stähle and heat-resistant superalloys in industrial milling applications. Tiger·tec Gold coating for long tool life Optimised F57 chipbreaker for stable chips 15° relief for secure cutting-edge stability Suitable for rostfreie Stähle and superalloys Boosted productivity when machining demanding alloys The combination of Tiger·tec Gold coating and the WSM35G substrate provides enhanced wear resistance and heat tolerance, which directly improves cycle times and reduces tool changes. For components in the M and S ISO groups — notably rostfreie Stähle and heat-resistant superalloys — this insert promotes stable chip formation and consistent surface finish. The result is measurable productivity gains and fewer interruptions in the production flow, supporting higher output with predictable tool life. Consistent chip control and cutting-edge security The integrated chipbreaker F57 and the 15° relief geometry are engineered to control chips and reduce cutting forces, lowering the risk of built-up edge and unexpected tool failure. The square 90° form combined with T3 thickness offers a robust cutting edge that resists chipping under interrupted cuts and high thermal loads. In practice, this means improved process security and reduced rework, as the insert keeps a consistent geometry over longer lifetimes. Practical selection guidance and application fit Selection of the correct grade and geometry is crucial for stable results; the SDGT09T3AEN-F57 WSM35G insert is optimised for machining rostfreie Stähle and challenging nickel- or cobalt-based alloys where heat resistance and edge stability are required. As an indexable insert, it simplifies inventory and replacement compared with brazed tools, offering clear advantages in maintenance and cost-efficiency. Consult technical data to match insert size and clamping system for best performance. Request application support or place an order via Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SDGT09T3AEN-F57-WSM35G-WALTER SKU: SDGT09T3AEN-F57-WSM35G-WALTER Type: Fräswendeschneidplatte / indexable milling insert Brand: Walter Tools Designation: SDGT09T3AEN-F57 WSM35G Series: Tiger·tec Gold Core data Relief angle: 15° Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: G Chipbreaker: F57 Special features Grade: WSM35G (coated carbide) Coating technology: Tiger·tec Gold Material suitability: M (rostfreie Stähle), S (superlegierungen / titanium) Application: Heavy-duty and heat-resistant materials Robust cutting-edge geometry for interrupted cuts FAQ What materials is this insert suitable for? The SDGT09T3AEN-F57 WSM35G insert is designed for rostfreie Stähle and heat-resistant superalloys (ISO groups M and S), where heat tolerance and stable chip control are required. How does the F57 chipbreaker affect performance? The chipbreaker F57 on this Walter Tools insert promotes controlled chip formation and reduced cutting forces, helping to maintain cutting-edge stability and consistent surface quality. What are the defining geometry features of the insert? This indexable insert has a square 90° shape, T3 thickness and a 15° relief angle, which together provide a robust edge and high resistance to chipping during heavy milling operations. Can this insert be used for interrupted cuts? Yes, the combination of the square form and the sturdy edge preparation of the SDGT09T3AEN-F57 WSM35G makes it suitable for interrupted cuts and applications with variable engagement. Is this an original Walter Tools product? The listed item is an original, factory-new Walter Tools insert; the product information refers to the manufacturer's grade and series for clarity. Where to get advice or purchase the insert? Metav Werkzeuge offers application advice and ordering services for the SDGT09T3AEN-F57 WSM35G insert; contact info@metav-werkzeuge.com for specifications and availability. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation with the manufacturers. The offered article is original and factory-new. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SDGT09T3AEN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated Tiger·tec Gold grade combined with a precise F57 chipbreaker and 15° clearance to keep milling cycles productive and predictable; order through Metav Werkzeuge for fast supply or request application advice from their consultants. SDGT09T3AEN-F57 WSP45G milling indexable insert — Tiger·tec Gold, 15° clearance (Walter Tools) SDGT09T3AEN-F57 WSP45G is a PVD-coated milling indexable insert designed for versatile face and shoulder milling in modern production environments Tiger·tec Gold PVD-coated indexable grade WSP45G Square 90° form for robust corner strength 15° clearance for versatile milling operations Suitable for Stahl, rostfreier Stahl and superalloys Consistent performance for mixed-material production The Tiger·tec Gold WSP45G grade combines a PVD coating with a tough carbide substrate to deliver reliable wear resistance and stable edge life when machining a range of alloys. Designed for the typical thermal and mechanical loads of steel machining, the grade also copes well with the tougher demands of rostfreier Stahl and heat-resistant alloys. The result is predictable tool life, fewer insert changes and reduced process interruptions for batch and job-shop production. Stable cutting edges and controlled chip formation A well-matched F57 chipbreaker and the insert’s geometry ensure efficient chip control and lower cutting forces during interruptions and varying engagement conditions. The insert’s square 90° form and 15° clearance produce a sturdy cutting corner and effective rake balance, which together reduce chatter and improve dimensional consistency. For users less familiar with coating technology: the PVD layer protects the cutting edge and reduces adhesion, helping to avoid edge build-up and maintain surface quality. Faster set-up and higher process security The T3 thickness and the SDGT format are optimised for standard milling tool bodies, enabling secure clamping and simple indexation. Using these inserts supports shorter set-up times and higher process security through repeatable seating and nominal tolerance class G. In practice this means fewer rejects, more uptime and a better throughput per toolholder, which positively affects overall production efficiency. Flexible application across common workpiece groups Thanks to its P/M/S designation, this insert is suitable for unalloyed and alloyed Stahl, stainless steels (as rostfreier Stahl) and demanding superalloys and titanium. The combination of a robust substrate and the Tiger·tec Gold coating is especially valuable where mixed-series production requires one insert type to cover several material groups without frequent tool changes, supporting both small-batch flexibility and continuous machining strategies. For reliable high-volume milling with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for technical consulting and supply — Metav Werkzeuge can advise on cutting data, batch quantities and compatible toolholders Technical data SKU: SDGT09T3AEN-F57-WSP45G-WALTER Article designation: SDGT09T3AEN-F57 WSP45G Manufacturer: Walter Tools / Walter Deutschland GmbH Series: Tiger·tec Gold Grade: WSP45G Form: Square 90° Size: 09 Thickness: T3 Clearance angle: 15° Chipbreaker: F57 Execution: T Tolerance class: G Facts Clearance angle: 15° Plate size: 09 Thickness: T3 Form angle: 90° Tolerance class: G Special features Coating: Tiger·tec Gold (PVD) Substrate: coated carbide Suitable for: Stahl, rostfreier Stahl, superalloys/Titan Chip control: F57 chipbreaker Application: milling indexable insert for face and shoulder milling Series benefit: balanced wear resistance and edge stability FAQ What materials can this insert machine effectively? The SDGT09T3AEN-F57 WSP45G insert is specified for machining Stahl, rostfreier Stahl and demanding superalloys/titanium applications, reflecting its P/M/S suitability. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating on this Walter Tools insert reduces built-up edge and improves wear resistance, which enhances tool life and keeps surface finish consistent over longer runs. Is the F57 chipbreaker suitable for interrupted cuts? Yes, the F57 chipbreaker is designed to promote controlled chip formation and to handle interrupted conditions commonly encountered in milling, improving stability and process security. Which toolholders are compatible with the SDGT09T3AEN-F57 format? The SDGT format and T3 thickness match standard indexable milling toolholders for square inserts; compatibility should be checked against the specific holder clamping geometry in use. How does the 15° clearance angle affect the machining process? The 15° clearance provides a compromise between cutting edge strength and clearance for chip evacuation, aiding versatility across finishing and medium-cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the manufacturers named. The offered item is original, factory-new goods from the manufacturer.
SDGT09T3AEN-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the WK10 uncoated carbide and the G88 chipbreaker for consistent chip control and stable performance in general milling applications; order directly via Metav Werkzeuge or consult the team for material-specific guidance. SDGT09T3AEN-G88 WK10 – Milling insert, square 90°, 15° clearance | Walter Tools The SDGT09T3AEN-G88 WK10 is a square milling insert designed for versatile face and slot milling operations, offering a 15° clearance angle and a robust G88 chipbreaker for predictable chip formation. Square 90° geometry for versatile milling 15° clearance angle for reliable cutting engagement WK10 uncoated carbide grade for general machining G88 chipbreaker for stable chip control Optimised chip control for predictable machining results The square geometry combined with the G88 chipbreaker provides reliable chip formation and evacuation, reducing the risk of breakouts and workpiece damage. The chipbreaker is engineered to maintain consistent chip shape across varying depths of cut, which supports steady productivity and reduces interruptions. For shops seeking reproducible cycle times, the emphasis on stable chip flow directly translates into fewer tool changes and more predictable process windows. Consistent cutting behaviour through a proven carbide grade The insert is supplied in the WK10 grade, an uncoated carbide developed for general-purpose machining. This base material offers a balance between wear resistance and toughness, suitable where a dependable cutting edge is required without specialised coatings. For applications where the product matrix recommends this grade, the result is repeatable performance and straightforward tool selection. The combination of grade and geometry supports economical machining by extending effective tool life under typical milling parameters. Geometry and clearance that support versatile toolpaths With a square 90° form and a 15° clearance angle, the insert suits a wide range of milling tasks, including face milling and light slotting. The shape enables four cutting edges per indexable insert, improving cost-efficiency per edge. The moderate clearance angle helps maintain contact stability during interrupted cuts and varying engagement angles, which benefits both roughing and finishing passes. For operations transitioning between facing and peripheral milling, the geometry reduces the need for multiple specialised inserts. Practical selection and application advice for production use The insert designation reflects its tooling function and orientation in standard toolholders; the code SDGT09T3AEN-G88 indicates size, thickness and chipbreaker type for straightforward identification. Where material-specific performance is critical, confirm the suitability of the WK10 grade against the recommended product matrix. In workshops with mixed materials, select cutting parameters conservatively at first and monitor tool wear; this approach helps to establish robust process parameters quickly while protecting component quality. Contact Metav Werkzeuge for application advice on the Walter Tools SDGT09T3AEN-G88 WK10 insert, including suitability of the WK10 uncoated carbide and the G88 chipbreaker for the intended material. Technical data Article number: SDGT09T3AEN-G88-WK10-WALTER Manufacturer: Walter Tools Product type: Milling insert (indexable insert) Designation: SDGT09T3AEN-G88 WK10 Facts Clearance angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Chipbreaker: G88 Carbide grade: WK10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What materials is this insert suitable for? The SDGT09T3AEN-G88 WK10 insert is intended for general machining; suitability for specific materials should be checked against the Walter product matrix and confirmed with process testing. Is the WK10 grade coated or uncoated? WK10 is an uncoated carbide grade; the uncoated design aids toughness and predictable edge behaviour in many standard milling applications. How does the G88 chipbreaker affect cutting performance? The G88 chipbreaker is designed to produce consistent chips and aid evacuation, improving process reliability and reducing the likelihood of chip-related disturbances during milling. Can the insert be indexed to use multiple cutting edges? Yes, the square 90° geometry provides up to four usable cutting edges per insert when correctly indexed in the matching toolholder. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Die Walter AG (marketed as Walter Tools) with headquarters in Tübingen is among the leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trade names and trademarks belong to their respective owners. The mentioned brand names and trademarks are cited for clarification only; there is no affiliation implied, and the offered article is an original, factory-new product of the manufacturer.
SDGT09T3AEN-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of a sharp, uncoated carbide grade combined with a 15° relief and the G88 chipbreaker for reliable, low‑adhesion milling of non‑ferrous alloys. Order this insert via Metav Werkzeuge or consult the technical advisers for application matching and cutting data. SDGT09T3AEN-G88 WXN15 Square milling insert, 15° relief for non‑ferrous metals — Walter Tools The SDGT09T3AEN-G88 WXN15 is a square 90° milling insert with a 15° relief angle, designed as an uncoated carbide grade for sharp, low‑adhesion cutting in aluminium, copper and brass applications. *Square 90° geometry for stable milling *15° relief angle for crisp cutting *Uncoated carbide WXN15 for NE metals *G88 chipbreaker reduces built‑up edge Precise cutting for non‑ferrous alloys with low adhesion The insert’s core advantage is its uncoated carbide grade WXN15, optimised for machining non‑ferrous materials. The combination of a very sharp cutting edge and a re‑entrant chip control geometry minimises material attachment and thermal build‑up, which is critical when processing aluminium, copper or brass. The G88 chipbreaker guides chips reliably, reducing the risk of clogging and enabling consistent surface finish even at elevated feed rates. For manufacturing environments where reduced secondary cleaning and dependable chip evacuation matter, this geometry yields measurable process benefits. Stable geometry for repeatable milling performance A square 90° form with a 15° relief angle provides a balance between cutting edge strength and accessibility to tight contours. The plate’s T3 thickness and tolerance class G ensure repeatable seating in standard toolholders and predictable radial and axial engagement. Such consistency supports cycle‑time optimisation and lowers scrap rates by maintaining tool behaviour across multiple indexing positions. The robust geometry and clear indexation characteristics contribute to smoother tool changes and less downtime during production runs. Practical application guidance for workshop integration The insert is part of the Walter N‑series, intended for sharp, uncoated operation on non‑ferrous materials and suitable for typical milling strategies where built‑up edge avoidance is a priority. The design supports straightforward replacement and indexing in conventional milling cutters that accept the SDGT form factor. When switching from coated to this uncoated grade, adjust coolant and feed strategy to favour chip evacuation and avoid smear: lower cutting speeds with adequate feed per tooth often produce the best results on aluminium alloys. The clear material suitability information simplifies process planning and reduces trial‑and‑error at set‑up. For specification and procurement of the Walter Tools SDGT09T3AEN-G88 WXN15 insert, contact Metav Werkzeuge to discuss cutter compatibility and recommended cutting data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SDGT09T3AEN-G88-WXN15-WALTER Designation: SDGT09T3AEN-G88 WXN15 Product type: Milling insert Manufacturer: Walter Tools Series: Walter N‑Sortensystem Grade: WXN15 Facts Relief angle: 15° Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: G Chipbreaker: G88 Execution: T Special features Uncoated carbide, sharp cutting grade Suitable for non‑ferrous metals (aluminium, copper, brass) Optimised for low built‑up edge Walter N‑series design for NE applications Stable geometry for predictable engagement FAQ Is this insert suitable for aluminium and other non‑ferrous metals? Yes. The SDGT09T3AEN‑G88 WXN15 is designed specifically for non‑ferrous metals such as aluminium, copper and brass, offering sharp cutting edges and a chipbreaker adapted to minimise material adhesion. Is the WXN15 grade coated? No. WXN15 is an uncoated carbide grade intended for sharp, low‑adhesion machining in NE applications rather than coated high‑temperature cutting. What is the significance of the G88 chipbreaker? The G88 chipbreaker is engineered to control chip formation and evacuation, reducing built‑up edge and improving surface finish when machining soft or ductile non‑ferrous materials. Which relief angle and geometry does the insert use? The insert features a 15° relief angle and a square 90° geometry, providing a robust cutting edge while allowing good access to profile contours. What series and system does the insert belong to? This insert is part of the Walter N‑series, a system tailored to sharp, uncoated grades for non‑ferrous machining. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation between our company and Walter Tools. The offered article is original, factory‑new merchandise from the manufacturer.
SDGT09T3AZN-F57 WAK15 Wendeplatten - Walter Tools
Take advantage of a purpose-built combination of rapid chip control and material-specific cutting geometry for reliable aluminium machining. The uncoated WAK15 carbide and the F57 chipbreaker reduce material adhesion and maintain edge stability, enabling consistent cycles and lower scrap rates. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SDGT09T3AZN-F57 WAK15 – Fräswendeschneidplatte (Square 90°, 15° relief) by Walter Tools SDGT09T3AZN-F57 WAK15 is an indexable milling insert designed for high-performance machining of non‑ferrous materials, especially aluminium and other N‑group metals Uncoated carbide grade WAK15 for non-ferrous Square 90° geometry with 15° relief Chipbreaker F57 for controlled chips Walter N-series: stable edge and productivity Consistent, fast aluminium machining with reduced built-up edge The WAK15 grade is an uncoated carbide developed for N‑group materials; its sharp cutting edge and low‑adhesion behaviour reduce built‑up edge and surface smearing during milling of aluminium and similar alloys. Combined with the chipbreaker F57, the insert promotes short, controllable chips that evacuate efficiently, lowering rework and improving cycle times. This results in measurable productivity gains in high‑volume operations while maintaining surface quality and dimensional repeatability for subsequent processes. Geometry engineered for accuracy and repeatable results A square 90° seating and 15° relief deliver a robust cutting geometry that supports both axial and radial loading, ensuring stable contact conditions in slotting and face milling. The T3 thickness and tolerance class G provide a predictable mounting and runout behaviour, which benefits setups requiring repeatable positioning and minimal adjustment. The insert’s form supports predictable tool life and reduces the need for frequent compensation, contributing directly to process reliability on the shop floor. System advantages that simplify production planning As part of the Walter N‑Sortensystem, this insert integrates into established toolholders and tooling families, enabling straightforward inventory management and quick indexability when a new edge is needed. The uncoated design avoids coating‑related adhesion issues common with soft, gummy alloys and helps maintain a consistent cutting action over the edge life. Using this indexable milling insert helps to keep setup times short and throughput stable — a benefit for both job shops and production lines seeking predictable output. Contact Metav Werkzeuge for expert advice and fast availability of Walter Tools WAK15 inserts suitable for aluminium machining: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: SDGT09T3AZN-F57-WAK15-WALTER Label: Fräswendeschneidplatte SDGT09T3AZN-F57 WAK15 Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Walter N-Sortensystem Grade: WAK15 Chipbreaker: F57 Execution: T Plate designation: SDGT09T3AZN-F57 Numeric Data Relief angle: 15° Plate size: 09 Plate thickness: T3 Geometry: Square 90° Tolerance class: G Special features Uncoated carbide grade WAK15 Suitable for aluminium and non‑ferrous metals Optimised for reduced material adhesion Designed for controlled chip formation Indexable milling insert, quick edge indexing FAQ What materials is this insert suitable for? The SDGT09T3AZN-F57 WAK15 insert from Walter Tools is optimised for aluminium and other non‑ferrous (N‑group) materials, providing low adhesion and reliable chip control in these alloys. Is the insert coated? The insert is uncoated (grade WAK15) and uses a carbide substrate tailored for sharp edges and minimal material build‑up during machining of soft, gummy metals. How does the F57 chipbreaker affect machining? The chipbreaker F57 promotes short, controlled chips and consistent evacuation, reducing the risk of entanglement and improving surface finish during continuous milling operations. What benefits does the square 90° geometry offer? The square 90° form provides a stable cutting edge for both radial and axial loads, supporting accurate slotting and face milling while helping to extend usable edge life. Can this insert be integrated into existing Walter tool systems? Yes. As part of the Walter N‑Sortensystem, the insert is compatible with standard Walter indexable milling toolholders, enabling simple replacement and predictable tool behaviour. Manufacturer: Walter AG; Tübingen; Germany. The Walter AG (brand: Walter Tools) with head office in Tübingen is one of the world's leading manufacturers of precision cutting tools and forms part of the Sandvik group. Protected trademarks and product names are the property of their respective owners and are used here for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
SDGT09T3AZN-F57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver wear resistance and the F57 chipformer for consistent performance in steel and cast iron machining; the square 90° form and 15° clearance support versatile milling operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SDGT09T3AZN-F57 WKP25S milling insert (Tiger·tec Silver, 15° clearance) — Walter Tools The SDGT09T3AZN-F57 WKP25S is a square 90° milling insert engineered for productive machining of steel and cast iron in general milling applications. Tiger·tec Silver coating for high wear resistance Optimised chipformer F57 for stable chip control Square 90° form, 15° clearance for versatile milling Suitable for steel (P) and cast iron (K) Longer tool life through advanced coating and substrate The combination of the Tiger·tec Silver coating and the WKP25S substrate delivers a measurable increase in tool life and consistent edge stability during continuous milling. The coating reduces abrasive wear and improves thermal resistance, which translates into fewer tool changes and lower process costs. For production environments this means a steadier cycle time and reduced downtime, particularly when machining unalloyed and alloyed steel grades. Reliable chip formation and process stability The integrated F57 chipformer has been optimised for predictable chip segmentation when cutting both steel and cast iron, reducing the risk of built-up edge and improving surface finish. Stable chip control supports higher feed rates and steadier cutting conditions, enabling improved material removal rates while maintaining dimensional consistency. The geometry is especially useful where short, controllable chips are required to protect the workpiece and toolholder interface. Versatile geometry for common milling tasks The Square 90° form and a 15° clearance angle create a robust cutting edge suitable for face and shoulder milling operations. The T3 thickness offers a balanced edge strength for medium-duty milling, while the insert size and form support straightforward indexability and repeatable seating in standard milling cutters. This geometry makes the insert a practical choice when one seeks a compromise between rigidity and cutting economy. Material compatibility and practical application notes Designed for machining applications in material groups P (steel) and K (cast iron), the insert’s composition and chipformer perform reliably across a broad range of workpiece grades. When programming feeds and speeds, the improved wear resistance of the coating allows slightly elevated cutting speeds compared with uncoated grades; however, final parameters should be validated on the specific machine and workholding setup. Stable clamping and correct coolant application further enhance performance. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools SDGT09T3AZN-F57 WKP25S into production and for ordering details — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: SDGT09T3AZN-F57-WKP25S-WALTER Article designation: SDGT09T3AZN-F57 ISO designation: SDGT09T3AZN-F57 WKP25S Facts Relief/clearance angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Coating/series: Tiger·tec Silver Grade/type: WKP25S (coated carbide) Chipformer: F57 Material suitability: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suited for? The SDGT09T3AZN-F57 WKP25S is designed for machining steel (P) and cast iron (K), making it suitable for a wide range of general milling tasks. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating increases wear resistance and thermal stability on the insert, which leads to longer tool life and fewer interruptions for tool changes. Which chip behaviour can be expected with the F57 chipformer? The F57 chipformer produces short, controllable chips, enhancing process stability and helping to protect both the workpiece and the toolholder during milling. Is this insert compatible with standard indexable milling cutters? Yes, the Square 90° form and T3 thickness are compatible with common indexable milling cutter systems that accept the SDGT-style insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for clarification only; there is no association between our company and the named brands. The offered item is an original, factory-new product from the manufacturer (Walter Tools).
SDGT09T3AZN-F57 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of long tool life, consistent chip control and robust geometry for reliable machining results; order the SDGT09T3AZN-F57 WKP35G milling insert directly via Metav Werkzeuge or consult our specialists for application advice. SDGT09T3AZN-F57 WKP35G milling insert – square 90°, 15° clearance · Walter Tools SDGT09T3AZN-F57 WKP35G is a coated carbide milling insert designed for productive machining of steel and cast iron in general milling applications. Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron machining Square 90° geometry with 15° clearance F57 chipbreaker for controlled chip formation Increase productivity with a durable coated grade The combination of the Tiger·tec Gold coating and the WKP35G grade provides a significant improvement in wear resistance and process stability compared with uncoated grades. As a coated carbide insert, it resists abrasive wear and thermal loads typical for machining steel and cast iron, which translates directly into longer tool life and fewer indexings. The designated coating technology optimises adhesion and hardness, enabling consistent edge retention under cyclic loads and contributing to reduced overall machining costs per component. Achieve predictable chip control and surface quality The F57 chipbreaker geometry was developed to manage chip formation for both continuous and segmented chips common in steel and cast iron operations. Combined with the square 90° form and the 15° relief angle, the insert delivers reliable chip flow and stable cutting forces, which supports steady surface finish and repeatable results. The insert designation follows ISO grouping for P (steel) and K (cast iron), clarifying its suitability for these material families and helping to select appropriate machining parameters without guesswork. Robust geometry for flexible machining strategies The compact 09 size and T3 thickness provide a rigid cutting edge for roughing and medium finishing operations where edge strength matters. The tolerance class G underlines consistent dimensional accuracy from index to index, assisting in predictable performance when switching corners. As an indexable solution from Walter Tools' Tiger·tec Gold series, the component supports higher material removal rates and lowers the frequency of tool changes, thereby improving uptime and shop-floor efficiency while maintaining surface integrity. For application-specific recommendations on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored machining advice and delivery options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SDGT09T3AZN-F57-WKP35G-WALTER Article designation: SDGT09T3AZN-F57 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Core technical data Relief angle: 15° Geometry: Square 90° Size designation: 09 Thickness: T3 Chipbreaker: F57 Tolerance class: G Materials / Special features Grade: WKP35G Material suitability: Steel (P), Cast iron (K) Carbide type: Coated carbide (Tiger·tec Gold technology) Main applications: General milling, roughing, semi-finishing FAQ What materials is this insert suitable for? The SDGT09T3AZN-F57 WKP35G milling insert from Walter Tools is specified for steel (P) and cast iron (K) applications, reflecting the WKP35G grade's optimisation for those material groups. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold coating on this indexable insert improves wear resistance and thermal stability, which supports longer tool life and more consistent cutting-edge performance during continuous production. What advantage does the F57 chipbreaker provide? The F57 chipbreaker ensures controlled chip formation for a range of cutting conditions, reducing the risk of irregular chips and helping to maintain a steady surface finish on both steel and cast iron. Is the square 90° geometry suitable for heavy cuts? Yes, the square 90° form combined with a T3 thickness delivers robust edge strength, making the insert suitable for heavier cuts as well as versatile in mixed roughing and semi-finishing applications. How is the insert designation interpreted? The designation SDGT09T3AZN-F57 WKP35G denotes the insert geometry, size (09), thickness (T3), chipbreaker (F57) and the cutting grade (WKP35G) within Walter Tools' Tiger·tec Gold series, providing a clear guide to its intended use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for descriptive purposes only; there is no affiliation between Metav Werkzeuge and the named trademark holders. The offered item is an original, brand-new product from the manufacturer.
SDGT09T3AZN-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a proven WPP35G grade and reliable chip control for efficient steel machining; order the insert directly via Metav Werkzeuge or contact our consultants for tailored cutting-data recommendations. SDGT09T3AZN-F57 WPP35G milling insert (square 90°, 15° clearance) — Walter Tools SDGT09T3AZN-F57 WPP35G is a square, indexable milling insert designed for productive steel machining with Tiger‑tec Gold coated carbide. Tiger‑tec Gold coated for long tool life Square 90° geometry for robust milling edges Chipbreaker F57 for controlled chip formation 15° clearance angle for stable cutting Greater productivity through optimised grade and coating The combination of the WPP35G grade and the Tiger‑tec Gold coating provides a balance of wear resistance and toughness that supports sustained production runs when machining steel. The coated carbide resists abrasive wear while maintaining a stable cutting edge, which translates into longer tool life and fewer insert changes. For manufacturing environments where process stability and predictable tool performance are priorities, this insert reduces unplanned downtime and contributes to consistent cycle times. Reliable chip control and cutting stability for safer operation The F57 chipbreaker is engineered to produce predictable chip shapes when milling common steel grades, reducing the risk of entanglement and improving evacuation from the cut. The square 90° form offers strong corner support and enables heavier radial engagement where required, while the 15° clearance helps to avoid rubbing and minimises vibration. These characteristics together improve surface quality and lower the likelihood of rework, supporting higher first-pass yields on prismatic parts and roughing operations. Practical handling and integration into the shopfloor With a compact 09 insert size and a T3 thickness, the insert fits a wide range of standard toolholders and adapters, simplifying inventory and setup. The ISO-style designation facilitates quick selection and replacement using existing tool management systems. Tolerance class G ensures consistent seating and repeatability in toolholders, so adjustments are minimised during index changes. The design supports a straightforward maintenance routine: periodic indexing restores a sharp cutting edge without complex reconditioning. Contact Metav Werkzeuge for bespoke cutting-data sheets and holder recommendations for Walter Tools Tiger‑tec Gold inserts; reference SKU SDGT09T3AZN-F57-WPP35G-WALTER when enquiring at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: SDGT09T3AZN-F57-WPP35G-WALTER Article designation: SDGT09T3AZN-F57 ISO designation: SDGT09T3AZN-F57 WPP35G Manufacturer: Walter Tools UID: SDGT09T3AZN-F57-WPP35G-WALTER Core dimensions Insert size: 09 Thickness: T3 Geometry: Square 90° Clearance angle: 15° Tolerance class: G Design & features Series: Tiger‑tec Gold Grade: WPP35G (coated carbide) Chipbreaker: F57 Execution: T Application group: Steel (P) Suitable for indexable milling toolholders FAQ What types of steel is this insert suited for? The SDGT09T3AZN-F57 WPP35G insert is optimised for a broad range of steel applications; the WPP35G grade balances wear resistance and toughness for common unalloyed and alloyed steels. How does the F57 chipbreaker improve machining? The F57 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which enhances surface finish and reduces the risk of chip-related interruptions. Can the insert be used for finishing as well as roughing? Yes, the combination of Tiger‑tec Gold coating and the WPP35G grade provides sufficient edge stability for semi‑finishing and many finishing passes on steel, depending on cutting parameters and part requirements. What does the 15° clearance angle mean for tool life? A 15° clearance angle reduces flank contact and rubbing, lowering heat generation and preserving the cutting edge, which contributes to extended insert life in steel machining. Is this a direct replacement for other SDGT‑style inserts? The SDGT09T3AZN-F57 WPP35G follows standard ISO‑style form factors for square inserts, but verification with the specific toolholder and cutting conditions is recommended before substitution. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT09T3AZN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of high wear resistance, stable chip control and a robust 90° square geometry to secure consistent, productive milling of stainless steels and superalloys; order directly via Metav Werkzeuge or consult our specialists for application advice. Fräswendeschneidplatte SDGT09T3AZN-F57 WSM35G — milling indexable insert with Tiger·tec Gold for stainless and high‑temperature alloys (Walter Tools) Fräswendeschneidplatte SDGT09T3AZN-F57 WSM35G is a square, positive‑geometry milling indexable insert designed for heavy‑duty and demanding materials, combining a coated carbide grade with a specialised chipbreaker for controlled machining. Tiger·tec Gold coated for high wear resistance Optimised for rostfreie Stähle and superalloys Square 90° insert with 15° clearance F57 chipbreaker for reliable chip control High productivity through reliable edge stability The WSM35G grade in the Tiger·tec Gold family is a coated carbide specifically developed to maintain a stable cutting edge under the thermal and mechanical stress typical of machining stainless steels and heat‑resistant superalloys. Stable edge behaviour reduces the frequency of tool changes and minimises unplanned downtime; the result is higher effective spindle utilisation and lower unit machining time. Coating properties enhance resistance to abrasive and adhesive wear, which translates directly into longer tool life under serial production conditions. Controlled chip formation for safer, faster milling Equipped with the F57 chipbreaker, the insert promotes consistent chip segmentation and evacuation when machining sticky or gummy materials. Good chip control reduces the risk of recutting, improves surface finish and lowers heat concentration at the cutting zone. For operators working on multi‑pass operations or interrupted cuts, the predictable chip shape supports higher feed rates while maintaining process reliability — a clear performance advantage when handling demanding workpiece alloys. Geometry engineered for versatility and strength The square 90° form coupled with a 15° clearance offers a positive cutting geometry that balances strength and cutting efficiency. The T3 plate thickness delivers mechanical support for the cutting edge, making the insert suitable for a range of axial and radial immersion strategies. This geometry is particularly advantageous where both face milling and slotting operations are required with the same insert type, reducing tool inventory while keeping process capability high. Application focus and practical considerations The grade and geometry are tailored to the ISO material groups M (rostfreie Stähle) and S (superalloys and titanium), so the insert is suitable for components subject to high temperatures and poor thermal conductivity. When selecting cutting parameters, prioritise moderate cutting speeds and controlled feeds to exploit the coating's resistance to abrasive adhesion; consult the insert’s data sheet or Metav Werkzeuge’s technical team for optimal speeds and feeds adapted to the specific stainless steel or nickel‑base alloy in use. Using appropriate coolant strategies and stable clamping will further improve repeatability and surface integrity. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools Tiger·tec Gold inserts and fast, reliable supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: SDGT09T3AZN-F57-WSM35G-WALTER Article designation: SDGT09T3AZN-F57 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Insert size: 09 Thickness: T3 Clearance angle: 15° Shape: Square 90° Tolerance class: G Applications & features Grade: WSM35G Chipbreaker: F57 Material classification: S / M Execution: T Base designation: SDGT09T3AZN-F57 FAQ What materials is this insert suitable for? The SDGT09T3AZN-F57 WSM35G insert is designed for M (rostfreie Stähle) and S (superalloys and titanium) materials and performs well on heat‑resistant and tough workpiece alloys. Which chipbreaker does the insert use and why is it important? This insert features the F57 chipbreaker; it is important because it ensures controlled chip formation and evacuation, improving surface finish and reducing recutting during milling. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM35G grade increases wear resistance and thermal stability, which helps maintain edge life and process stability when machining challenging materials. Can the SDGT09T3AZN-F57 WSM35G be used for slotting as well as face milling? Yes, the square 90° geometry and T3 thickness provide sufficient edge support for both face milling and slotting applications, given appropriate cutting parameters. Where can one get advice on cutting parameters for specific alloys? Technical guidance and recommended speeds and feeds for the SDGT09T3AZN-F57 WSM35G insert are available from Metav Werkzeuge’s advisory team and from Walter Tools application literature. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen belongs to the global group of precision tool manufacturers and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners and are used here for explanatory purposes only. The offered item is an original, brand‑new product from the manufacturer.
SDGT09T3AZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile material compatibility and a compact square 90° geometry for reliable, productive milling. Order the SDGT09T3AZN-F57 WSP45G directly via Metav Werkzeuge or consult our specialists for application advice. SDGT09T3AZN-F57 WSP45G Milling Insert (square 90°, 15° clearance) — Walter Tools SDGT09T3AZN-F57 WSP45G is a PVD-coated indexable milling insert designed for demanding milling applications across a wide range of materials Tiger·tec Gold PVD coating for edge stability Suitable for steel, stainless steel and titanium Square 90° geometry for versatile milling 15° clearance angle for controlled chip flow High productivity from a tough, PVD-coated grade The combination of Tiger·tec Gold technology and the WSP45G grade delivers a robust, PVD-coated carbide that supports stable cutting edges and extended tool life. This milling insert is engineered to withstand the thermal and mechanical loads typical in the machining of steel, stainless steel and superalloys, which helps to reduce unscheduled tool changes and increase net machining time. The result is improved process efficiency and more consistent component quality in series production. Geometry and chip control for repeatable surface quality Featuring a square 90° face and a nominal thickness of T3, the insert provides a secure seating and flexible use in a variety of cutter bodies. The 15° clearance angle helps to reduce rubbing and excessive heat at the cutting edge, while the chipbreaker F57 promotes controlled chip formation and evacuation. These geometric features translate into smoother finishes, predictable tool wear and fewer interruptions for chip-related faults, supporting stable cycle times and predictable downstream processes. Proven suitability across ISO groups P, M and S The cutting grade is specifically formulated for the ISO material groups P (unalloyed and alloyed steels), M (stainless steels) and S (heat-resistant superalloys and titanium). The chemistry and coating of the grade address the distinct challenges of each group — from typical steel cutting heat generation to the tendency for built-up edge in stainless and the poor thermal conductivity of superalloys — enabling secure chip formation and a durable cutting edge under varied conditions. This makes the insert a practical choice for workshops that require multi-material capability without frequent tool changeovers. Operational benefits and inventory clarity for production plants Using standardised insert formats such as the SDGT series simplifies inventory management and tool change routines. The SDGT09T3AZN-F57 designation identifies the insert geometry, size and chipbreaker in a single code, reducing setup time and the risk of incorrect parts. Backed by Walter Tools’ industry reputation for precision tooling, the insert supports consistent machining results, good surface quality and predictable tool life — all contributing to lower unit costs and improved on-time delivery performance. For tailored application advice on the SDGT09T3AZN-F57 WSP45G or to discuss batch supply from Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will support specification and selection for specific materials and machines Technical data Article number / SKU: SDGT09T3AZN-F57-WSP45G-WALTER Product designation: SDGT09T3AZN-F57 Type: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Core specifications Geometry: Square 90° Clearance angle: 15° Size designation: 09 Thickness: T3 Chipbreaker: F57 Tolerance class: G Materials & features Series: Tiger·tec Gold Grade/coating: WSP45G (PVD-coated carbide) Applicable material groups: P (steel), M (stainless steel), S (superalloys / titanium) Execution: T (insert thickness/design) ISO designation: SDGT09T3AZN-F57 WSP45G FAQ What types of material can this insert machine effectively? The SDGT09T3AZN-F57 WSP45G is designed for ISO groups P, M and S, enabling machining of steel, stainless steel and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WSP45G grade enhances edge stability and wear resistance, which increases component throughput by reducing tool changes and maintaining surface quality. Which chipbreaker is integrated and what is its purpose? The insert features chipbreaker F57, optimised to control chip formation and evacuation for more consistent cutting performance and improved surface finish. Is the insert compatible with standard SDGT toolholders? The SDGT09T3AZN-F57 designation indicates standard SDGT geometry and seat fitment, making it compatible with corresponding cutter bodies that accept SDGT-format inserts. Where can application support or batch supply be obtained? Metav Werkzeuge can assist with application selection, supply volume enquiries and technical data; contact info@metav-werkzeuge.com or call +49 2822 7131930 for support. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new merchandise from the manufacturer.
SDGT09T3AZN-G77 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven WSP45G grade and the square 90° geometry for consistent performance and low downtime; order the insert directly via Metav Werkzeuge or contact our consultants for technical advice. SDGT09T3AZN-G77 WSP45G milling indexable insert by Walter Tools — Tiger·tec Gold, for Stahl, rostfreier Stahl and superalloys, square 90°, 15° clearance The SDGT09T3AZN-G77 WSP45G is a square 90° milling indexable insert engineered for versatile roughing and finishing operations in demanding materials, offering a balanced mix of edge stability and chip control for shop-floor productivity Tiger·tec Gold PVD coating for long tool life Suitable for Stahl, rostfreier Stahl and superalloys Square 90° geometry for stable milling 15° free clearance and T3 chipbreaker Boosted productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a tangible performance uplift in many milling tasks. As a coated carbide insert designed for P / M / S applications, it is optimised for the thermal and mechanical loads encountered when machining Stahl, rostfreier Stahl and superalloys. The P / M / S designation signals compatibility with a broad material spectrum: P for general Stahl, M for rostfreier Stahl and S for heat-resistant alloys and titanium. This adaptability reduces tool variety in the tooling cabinet and allows process engineers to standardise on an insert that maintains cutting stability across mixed production runs. Stable geometry for accurate cuts and consistent surface quality A square 90° geometry provides positive engagement and robust support at the cutting edge, improving stability during heavy interrupted cuts and slotting operations. The 15° clearance reduces rubbing on the flank while controlling cutting forces, and the T3 thickness ensures a rigid mount that resists chipping under load. Together these design choices contribute to reproducible dimensional accuracy and improved surface finish, which is especially relevant when switching between roughing and light finishing tasks in component production. Controlled chip formation and reduced operating costs The integrated G77 chipbreaker promotes controlled chips and prevents long, entangling swarf in deep or high-feed milling passes. Better chip control shortens non-cutting time for clearing and reduces the risk of rework caused by poor swarf evacuation. The net effect is longer tool life and fewer insert changes, which lowers per-part tooling cost and increases machine availability. Manufactured by Walter Tools, the insert benefits from production standards that emphasise edge integrity and repeatable performance, supporting stable process windows and predictable tool-change intervals. For tailored advice on integrating the SDGT09T3AZN-G77 WSP45G into an existing process or for immediate procurement support, contact Metav Werkzeuge — our team will assist with application data and availability. Technical data Article number: SDGT09T3AZN-G77-WSP45G-WALTER Designation: SDGT09T3AZN-G77 WSP45G Manufacturer: Walter Tools Product type: milling indexable insert Facts Free angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: G77 Execution: T Material suitability: P / M / S Applicable for: Stahl, rostfreier Stahl, superalloys FAQ What materials can this insert machine effectively? The SDGT09T3AZN-G77 WSP45G is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys, reflecting its P / M / S classification and the thermal resilience of the Tiger·tec Gold coating. Which operations is this insert best for? The square 90° geometry and robust T3 profile make the insert ideal for both heavy milling and light finishing where a stable cutting edge and reliable chip control are required. How does the G77 chipbreaker affect performance? The G77 chipbreaker encourages short, controlled chips during milling, improving swarf evacuation and reducing the likelihood of re-cutting or tool interference. Is this insert compatible with standard indexable milling cutters? Yes — the SDGT09T3AZN-G77 WSP45G is an indexable insert designed to fit cutters that accept SDGT-style square 90° inserts; check cutter manufacturer seating dimensions for confirmation. What are the key advantages of the Tiger·tec Gold series here? Tiger·tec Gold provides enhanced wear resistance and thermal stability, which together extend the WSP45G insert’s life and maintain a consistent cutting edge under varying machining conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT09T3PDR-D57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP25S grade for prolonged tool life, while the D57 chipbreaker and 15° clearance deliver reliable chip control and consistent surface quality; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SDGT09T3PDR-D57 WKP25S – Milling insert (Square 90°, 15° clearance) by Walter Tools The SDGT09T3PDR-D57 WKP25S is a square milling insert engineered for productive machining of steel and cast iron, combining a robust coated carbide grade with a dedicated chipbreaker for controlled chip formation Tiger·tec Silver coating for stable wear resistance Optimised D57 chipbreaker for reliable chip control Square 90° insert, 15° clearance, T3 thickness Robust coating for longer tool life and steady productivity The Tiger·tec Silver technology, applied to the WKP25S cutting grade, offers enhanced wear resistance under typical steel and cast iron cutting conditions. This coated carbide composition reduces flank wear and preserves cutting-edge geometry, which translates into longer intervals between indexings and fewer unplanned tool changes. For production environments where uptime matters, the result is a measurable improvement in process stability and reduced tool handling. Predictable chip formation and geometry that aids surface quality The integrated D57 chipbreaker is designed to produce manageable chip shapes when machining ISO groups P (steel) and K (cast iron), improving evacuation and reducing the risk of recutting. The square 90° form delivers robust shoulder milling performance and allows effective axial engagement, while the 15° clearance helps prevent rubbing on the workpiece. Together, these geometry choices support consistent surface finish and lower the incidence of built-up edge in intermittent cutting. Application guidance for efficient integration into tool systems The insert’s T3 thickness and the specified execution enable straightforward adaptation to standard milling cutter bodies that accept this geometry. For planning cuts, select speeds and feeds aligned with the WKP25S recommendations for steel or cast iron workpieces; conservative starting parameters assist in validating chip flow and thermal behaviour. For unfamiliar materials, trial passes with shorter lengths of cut help confirm the best combination of feed per tooth and depth of cut for stable performance. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to confirm the optimal chipbreaker and geometry for specific steel or cast iron applications Technical data Article number: SDGT09T3PDR-D57-WKP25S-WALTER SKU: SDGT09T3PDR-D57-WKP25S-WALTER Designation: SDGT09T3PDR-D57 WKP25S Product type: Milling insert Manufacturer: Walter Tools Core specifications Free angle: 15° Insert shape: Square 90° Plate size: 09 Thickness: T3 Tolerance class: G Materials & features Coating / series: Tiger·tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D57 Execution: T Suitable for: Steel (ISO P) and Cast iron (ISO K) Plate designation without grade: SDGT09T3PDR-D57 FAQ What materials is this insert suitable for? The SDGT09T3PDR-D57 WKP25S insert is intended for machining steel (ISO P) and cast iron (ISO K) and is optimised for these material groups thanks to the WKP25S grade. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WKP25S grade improves wear resistance and thermal stability, extending the service life of the insert in demanding milling operations. How does the D57 chipbreaker affect machining? The D57 chipbreaker supports controlled chip formation and evacuation during milling, reducing recutting and helping to maintain consistent surface quality with this Walter Tools insert. Is the square 90° geometry suitable for shoulder milling? Yes, the square 90° form combined with 15° clearance is well suited to shoulder milling and allows for robust axial engagement in typical cutter bodies. How can the designation SDGT09T3PDR-D57 be interpreted? The designation indicates insert geometry and chipbreaker type (D57); SDGT09T3PDR-D57 WKP25S specifies the insert form and the WKP25S coated carbide grade used for steel and cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT09T3PDR-D57 WKP35G Wendeplatten - Walter Tools
Benefit from long tool life, consistent edge stability and the productivity gains of the Tiger‑tec Gold coating for reliable milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. SDGT09T3PDR-D57 WKP35G — Square 90° indexable milling insert for steel and cast iron, Tiger‑tec Gold (Walter Tools) A SDGT09T3PDR-D57 WKP35G indexable milling insert designed for high-productivity face and shoulder milling in steel (P) and cast iron (K) applications, offering a robust geometry and an advanced coated grade. Tiger‑tec Gold coating for enhanced wear resistance Optimised for steel (P) and cast iron (K) applications Square 90° form with 15° free angle for secure seating D57 chipbreaker for controlled chip formation Durable coating and grade for longer productive runs The combination of the Tiger‑tec Gold coating and the WKP35G grade provides a pronounced improvement in wear resistance and edge stability during continuous milling. The coating reduces flank and crater wear under the elevated temperatures typical when machining steels, which translates directly into fewer index changes and less unplanned downtime. As a result, process planners can expect improved tool life and steadier dimensional results across batch production. Predictable chip formation for safer, more efficient machining Equipped with a D57 chipbreaker, the insert promotes short, consistent chips when machining both unalloyed and alloyed steels as well as cast iron. Controlled chip formation reduces entanglement and evacuation issues in automated setups and improves surface quality by avoiding irregular cutting forces. The chip control is particularly beneficial when machining interrupted cuts or thin-walled components where uncontrolled chips can damage the workpiece or tool. Robust geometry for reliable clamping and accuracy The square 90° insert form and 15° free angle combine to deliver a secure seat in the cutter body and a versatile cutting edge for shoulder and face operations. The T3 thickness provides a stable cutting edge while keeping the insert economical; the tolerance class G ensures reproducible seating and repeatable part geometry when inserts are indexed. This geometry supports reliable, repeatable results in high-volume production environments. Application focus and operational advantages Specified for the ISO P and K material groups, the insert is intended for a wide range of steels and cast irons, making it suitable for general engineering and automotive components. The graded design aims to balance abrasive wear resistance and fracture resistance, helping to extend maintenance intervals and lower total machining cost. When combined with a suitable cutter body and machining parameters, the insert supports higher material removal rates and consistent surface finish. For application-specific selection of the SDGT09T3PDR-D57 WKP35G and to discuss compatible cutter bodies, contact Metav Werkzeuge for tailored advice and fast, reliable supply: eMail info@metav-werkzeuge.com | Tel +49 2822 7131930 Technical data Article number / SKU: SDGT09T3PDR-D57-WKP35G-WALTER Designation: SDGT09T3PDR-D57 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Form: Square 90° Free angle: 15° Thickness: T3 Facts Size: 09 Chipbreaker: D57 Tolerance class: G Material suitability: P (steel), K (cast iron) Special features Coating: Tiger‑tec Gold (coated carbide) Material: coated carbide grade Application focus: Steel and cast iron (ISO P and K) Geometry: Square 90° insert for face and shoulder milling FAQ What materials is this insert suitable for? The SDGT09T3PDR-D57 WKP35G is specified for ISO groups P and K, making it suitable for machining a wide range of steels and cast irons with optimised performance. How does the Tiger‑tec Gold coating help in production? Tiger‑tec Gold on the WKP35G grade improves wear resistance and thermal stability, which leads to longer insert life and more consistent cutting performance in serial milling operations. What is the function of the D57 chipbreaker? The D57 chipbreaker is designed to produce short, consistent chips for safer evacuation and reduced risk of workpiece or tool damage during interrupted and continuous cuts. Can this insert be used for heavy shoulder milling? With its square 90° geometry and robust T3 thickness, the insert is appropriate for shoulder and face milling applications where a stable cutting edge and secure clamping are required. How does the tolerance class affect interchangeability? The tolerance class G helps ensure reproducible seating and repeatable part geometry when inserts are changed or indexed, supporting consistent results in production setups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanation purposes only and do not imply any affiliation between our company and the named manufacturers. The offered article is original and factory‑new.
SDGT09T3PDR-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Precise chip control and a durable Tiger‑tec Gold coating combine to extend tool life and increase process stability; the combination of a WPP35G grade and chipbreaker D57 delivers consistent chips when machining Stahl. Order this insert via Metav Werkzeuge or consult our specialists for integration advice. SDGT09T3PDR-D57 WPP35G – Square 90° milling insert, Tiger‑tec Gold, for Stahl, Walter Tools A SDGT09T3PDR-D57 WPP35G is a square, 90° indexable milling insert engineered for robust Stahl machining, featuring a 15° clearance and a D57 chipbreaker for controlled chip formation Tiger‑tec Gold coated grade WPP35G Square 90° form for versatile milling 15° clearance for stable cutting Chipbreaker D57 for reliable chip control Enhanced tool life through advanced coating and grade The combination of the Tiger‑tec Gold coating with the WPP35G grade provides a measured balance between wear resistance and toughness, which results in longer tool life under typical milling stresses. The coated carbide substrate reduces flank wear and improves thermal stability during interrupted cuts. Together with the integrated chipbreaker D57, the insert supports consistent chip evacuation and reduced tool change frequency, contributing directly to higher productivity and lower process costs. Geometry designed for dependable cutting in Stahl The square 90° plate form and a 15° clearance angle give a stable cutting edge and predictable engagement behaviour, especially in shoulder and face milling. The moderate clearance helps maintain a positive shear action while avoiding excessive rubbing on the flank. With a plate thickness of T3 and size 09, the insert is dimensioned for routine milling tasks where a balance of rigidity and edge strength is required, enabling repeatable results in production environments. Application range and machining advantages Classified for ISO group P, the insert is optimised for machining Stahl (unalloyed and alloyed steels). The coated carbide construction is prepared to cope with the typical heat and chip formation of such materials, allowing for higher cutting speeds than uncoated grades in many cases. For process planners, the rated properties indicate reduced crater wear and stable performance, which supports longer uninterrupted cycles and improved surface integrity on workpieces. Practical benefits for tool selection and inventory Tolerance class G and the clear ISO-style designation facilitate straightforward identification and replacement in standard tool holders. The uniform geometry across the Tiger‑tec Gold series simplifies tool assortment management and makes it easier to match inserts with existing tool bodies. Reliability in chip control and the proven grade behaviour reduce scrap risk and contribute to consistent component quality, strengthening overall process reliability. For procurement or technical advice on Walter Tools inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: SDGT09T3PDR-D57-WPP35G-WALTER Label: Fräswendeschneidplatte SDGT09T3PDR-D57 WPP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WPP35G Facts Plate size: 09 Plate thickness: T3 Free angle: 15° Plate form: Square 90° Tolerance class: G Execution: T Special features Coating/technology: Tiger‑tec Gold Chipbreaker: D57 Base material: coated carbide Application group: P (Stahl) Suitable for Stahl machining FAQ Which materials is this insert suitable for? The SDGT09T3PDR-D57 WPP35G insert is designed for ISO P applications and is suitable for machining Stahl, including common unalloyed and alloyed steels. What does the WPP35G grade offer in practice? WPP35G is a Walter‑defined coated carbide grade within the Tiger‑tec Gold family that balances wear resistance and toughness for improved life and process stability when machining Stahl. How does the chipbreaker D57 influence machining? The chipbreaker D57 promotes controlled chip formation and evacuation; used together with the plate geometry, it reduces the risk of long, stringy chips and supports consistent surface finish and tool life. Is the insert compatible with standard square 90° tool holders? Yes; the square 90° form and ISO‑style designation allow straightforward mounting in conventional tool bodies designed for 90° indexable plates. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT09T3PDR-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a stable chipbreaker D57 and a 15° clearance for consistent edge life and predictable machining results. Order the insert directly via Metav Werkzeuge or consult the advisors for application-specific selection. SDGT09T3PDR-D57 WSM35G milling insert (square 90°, 15° clearance) – Walter Tools The SDGT09T3PDR-D57 WSM35G is an indexable milling insert engineered for demanding machining of stainless steels and heat‑resistant superalloys, offering robust edge stability and controlled chip formation Tiger·tec Gold coating for edge stability Optimised chipbreaker D57 for secure chip control Square 90° geometry for versatile face milling 15° clearance angle for reduced cutting forces Durable edge life and dependable process security The coated WSM35G grade, part of the Tiger·tec Gold series, is formulated for reliable performance when machining stainless steels and high‑temperature alloys. The multilayer coating enhances thermal resistance and reduces flank wear, which supports longer tool life under interrupted cuts and elevated cutting temperatures. This results in fewer insert changes, more consistent component dimensions and improved machine uptime. The hardened substrate combined with the coating keeps the cutting edge stable, reducing the risk of premature breakdown and ensuring reproducible results in series production. Predictable chip control for efficient material removal The dedicated chipbreaker D57 channel is designed to break and evacuate chips reliably during face and shoulder milling. The geometry promotes short, curled chips rather than long stringy swarf, lowering the risk of re-cutting and tool jamming. Predictable chip behaviour simplifies fixturing and coolant management and supports higher material removal rates with stable surface finish. For applications where process repeatability matters, the insert’s chip control contributes directly to consistent cycle times and reduced secondary operations. Versatility for stainless steels and superalloys With a square 90° profile and a 15° clearance, this indexable insert suits a range of milling tasks from heavy shoulder cuts to finishing passes. The combination of the grade and geometry makes it well suited to the machining characteristics of stainless steels (ISO group M) and superalloys/titanium (ISO group S), materials known for toughness and heat sensitivity. The insert’s design mitigates work hardening and supports secure chip formation, enabling reliable performance across varying feed rates and depths of cut. Practical handling and integration into tool systems The insert thickness T3 and size designation 09 correspond with common toolholders, simplifying stock keeping and tool change procedures on production lines. The G tolerance class and the square format enable accurate indexation and repeatable pocket seating, which helps maintain part tolerances over multiple tool indexes. Clear identification on the insert and the ISO designation allow rapid matching with toolholder specifications, streamlining tool provisioning and reducing setup times in mixed‑model environments. For machine shops seeking reproducible performance from Walter Tools’ Tiger·tec Gold technology, place orders via Metav Werkzeuge or contact the Metav Werkzeuge technical advisors for a tailored insert and holder recommendation Technical Data SKU: SDGT09T3PDR-D57-WSM35G-WALTER Designation: SDGT09T3PDR-D57 WSM35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Facts Clearance angle: 15° Insert shape: Square 90° Size: 09 Thickness: T3 Tolerance class: G Special features Grade/series: WSM35G, Tiger·tec Gold Chipbreaker: D57 Applicable material groups: M (stainless steels), S (superalloys / titanium) Execution: T Material designation: S / M FAQ What materials is this insert suited for? The SDGT09T3PDR-D57 WSM35G insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), providing thermal stability and secure chip formation. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and reduces flank wear, which extends edge life and supports consistent machining performance under elevated temperatures. Which chip behaviour can be expected with the D57 chipbreaker? The chipbreaker D57 promotes short, curled chips for reliable evacuation and reduced risk of re‑cutting, improving process stability in face and shoulder milling operations. Is the insert compatible with standard square insert holders? The square 90° format and the size designation 09 make the insert compatible with common square insert holders; ensure the holder matches the ISO designation SDGT09T3PDR‑D57 for correct seating. What operational advantage does the 15° clearance angle provide? The 15° clearance reduces rubbing on the flank face, lowers cutting forces and helps to maintain a cleaner cutting edge, which contributes to improved surface finish and reduced heat generation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for clarification only. There is no affiliation between Metav Werkzeuge and the mentioned trademark owners. The offered article is an original, factory‑new product of the manufacturer.
SDGT09T3PDR-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WSP45G grade and precise geometry for sustained productivity and reliable edge life — order directly via Metav Werkzeuge or consult our specialists for machining advice. SDGT09T3PDR-D57 WSP45G milling indexable insert with Tiger·tec Gold coating — Walter Tools The SDGT09T3PDR-D57 WSP45G is a square 90° milling insert designed for versatile machining of Stahl, rostfreier Stahl and heat-resistant alloys in robust milling applications. Tiger·tec Gold coated carbide grade WSP45G Suitable for Stahl, rostfreier Stahl and Superalloys Square 90° insert with 15° clearance Stable chip control with D57 chipbreaker Engineered coating and grade for consistent productivity The combination of the Tiger·tec Gold coating and the WSP45G coated carbide grade provides a balance of wear resistance and edge toughness that benefits continuous and interrupted milling. The PVD-based coating enhances thermal stability and reduces flank wear, which translates into longer tool life and more predictable replacement intervals. For operations on Stahl and rostfreier Stahl, the material-specific formulation supports controlled chip formation and resistance to built-up edge; for tougher alloys the grade maintains cutting-edge stability, helping to keep cycle times consistent and reducing unscheduled tool changes. Geometry that reduces set-up time and improves process reliability A square 90° form combined with a 15° clearance angle and T3 thickness delivers a robust cutting edge with simple indexing routines. The D57 chipbreaker is tuned for stable chip control across a range of feeds, lowering the risk of recutting and improving surface finish without complex parameter changes. The insert’s tolerance class G ensures repeatable seating in pockets and reliable run-out characteristics during high-volume production. These features support efficient tool life management and reduce the need for frequent process interventions. Practical advantages in daily milling workflows Specified for the ISO groups P, M and S, this insert excels when machining a broad material mix — from standard Stahl components to rostfreier Stahl and heat-resistant superalloys or titanium. The result is fewer tool variants to keep in stock and easier process planning. The coated carbide substrate and chipbreaker combination reduce vibration sensitivity and help achieve consistent results on long runs, which contributes to higher machine utilisation and lower per-part tooling costs. If there is any uncertainty about the exact cutting data or application fit for a specific machine or workpiece, technical enquiries are welcome — Metav Werkzeuge provides application support and data to assist in optimising cutting parameters. For application advice on Walter Tools' Tiger·tec Gold inserts or to discuss implementation with Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDGT09T3PDR-D57-WSP45G-WALTER Product label: Fräswendeschneidplatte SDGT09T3PDR-D57 WSP45G Walter Tools Type: Milling indexable insert Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: D57 Form: Square 90° Size: 09 Thickness: T3 Clearance angle: 15° Tolerance class: G Execution: T Applicable materials: P / M / S Manufacturer: Walter Tools Facts Insert size: 09 Thickness: T3 Clearance angle: 15° Corner angle: 90° Tolerance class: G SKU: SDGT09T3PDR-D57-WSP45G-WALTER Special features Tiger·tec Gold PVD coating Coated carbide grade WSP45G Suitable for Stahl, rostfreier Stahl and Superalloys/Titan D57 chipbreaker for stable chip control Square 90° geometry for versatile milling Tolerance class G for repeatable seating FAQ Which materials is this insert suitable for? The SDGT09T3PDR-D57 WSP45G is designed for machining Stahl (P), rostfreier Stahl (M) and Superalloys/Titan (S), reflecting the versatile application range of the WSP45G grade. What are the main benefits of the Tiger·tec Gold coating? The Tiger·tec Gold coating improves thermal resistance and wear behaviour, which helps the insert maintain cutting-edge integrity and extend service life in demanding milling operations. How does the D57 chipbreaker affect performance? The D57 chipbreaker promotes controlled chip formation and evacuation across a variety of feeds, reducing the chance of recutting and supporting a consistent surface finish. Can the insert be used for interrupted cuts? Yes, the combination of the coated carbide grade and the robust square 90° geometry provides good edge stability for many interrupted milling scenarios. What does the tolerance class G mean for the user? Tolerance class G indicates precise dimensional control of the insert, which contributes to repeatable seating and consistent tool performance in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
SDGT1204AZN-F57 WAK15 Wendeplatten - Walter Tools
Combining precise chip control, a sharp uncoated carbide cutting edge and a 15° clearance for low cutting forces, this insert is built for productive aluminium and non‑ferrous machining. Order the SDGT1204AZN-F57 WAK15 directly via (Metav Werkzeuge) or ask our consultants if needed. SDGT1204AZN-F57 WAK15 milling insert — uncoated carbide, 15° clearance | Walter Tools A SDGT1204AZN-F57 WAK15 milling insert designed for efficient machining of aluminium and other non‑ferrous metals, combining a square 90° geometry with the F57 chipbreaker for controlled chips and consistent surface quality. Uncoated carbide for sharp edges 15° clearance for low friction Square 90° geometry for stability F57 chipbreaker optimised for aluminium Consistent productivity through controlled chip formation The combination of uncoated carbide (WAK15) and the F57 chipbreaker delivers predictable, short chips when machining aluminium and other non‑ferrous materials. This results in reduced machining interruptions and fewer tool changes, supporting a higher throughput. The insert’s geometry promotes stable cutting conditions, which helps maintain cycle times and reduces the need for secondary operations, translating into measurable productivity gains on the shop floor. Geometry engineered for low cutting forces and surface quality A square 90° form together with a 15° clearance reduces rubbing and minimises heat build‑up at the cutting edge. The moderate clearance angle lowers cutting forces, improving tool life and helping to avoid built‑up edge formation common with soft materials. The plate’s dimensions (size 12, thickness 04) and tolerance class G ensure repeatable fitment in standard Walter seating, enabling consistent part quality and easier tool changeovers in production environments using the Walter N‑Sortensystem. Application focus: aluminium and non‑ferrous metals This grade is specified for N‑group materials; the insert’s sharp edge geometry and uncoated carbide suit aluminium and non‑ferrous alloys where adhesion and material smear can be an issue. The result is improved surface finish and reduced secondary machining. The insert is particularly suitable for manufacturers and subcontractors who require reliable performance in series production and repeatable results across batch runs. Practical benefits and system compatibility Designed for use within the Walter N‑Sortensystem, the insert offers straightforward integration into existing toolholders, simplifying inventory and setup management. The execution and chip control make it well suited to both roughing and semi‑finishing passes in non‑ferrous applications, while the robust carbide grade promotes consistent edge retention. For teams seeking a balance of cutting quality and operational efficiency, this insert helps lower rework rates and supports predictable cycle times. Contact Metav Werkzeuge for tailored recommendations and to secure Walter Tools SDGT1204AZN-F57 WAK15 inserts for aluminium machining Technical Data Article number / SKU: SDGT1204AZN-F57-WAK15-WALTER Product type: Milling insert Brand: Walter Tools Series: Walter N-Sortensystem Grade: WAK15 ISO designation: SDGT1204AZN-F57 WAK15 Execution: T Facts Plate size: 12 Plate thickness: 04 Clearance angle: 15° Plate form: Square 90° Chipbreaker: F57 Tolerance class: G Special features Uncoated carbide grade WAK15 Suitable for aluminium and non‑ferrous metals (ISO group N) Square 90° geometry for stable milling Walter N‑Sortensystem compatibility Optimised F57 chipbreaker for chip control FAQ What materials is this insert intended for? The SDGT1204AZN-F57 WAK15 is intended for aluminium and other non‑ferrous metals, corresponding to ISO material group N; its sharp edge geometry and chipbreaker minimise adhesion and improve surface finish. How does the 15° clearance influence machining? A 15° clearance reduces rubbing and cutting forces, which helps avoid built‑up edge and lowers heat generation when machining soft, adhesive materials like aluminium. Is the insert compatible with standard Walter holders? Yes, the insert follows the Walter N‑Sortensystem seating and the SDGT format, ensuring compatibility with matching Walter toolholders and straightforward replacement logistics. What is the chip control behaviour of the F57 breaker? The F57 chipbreaker is optimised to produce controlled, manageable chips in non‑ferrous machining, reducing entanglement and aiding uninterrupted production cycles. Can the grade WAK15 be used for finishing passes? The uncoated WAK15 grade is suitable for both roughing and semi‑finishing in aluminium; its sharp cutting edge can achieve good surface quality depending on cutting parameters and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer. The Walter Tools brand is part of the Walter AG portfolio and is affiliated with Sandvik’s group of precision tooling solutions.
SDGT1204AZN-F57 WKP25S Wendeplatten - Walter Tools
Benefit from a robust combination of Tiger·tec Silver coating, the WKP25S grade and an optimised F57 chipbreaker for stable chip control and long edge life. The result is reliable, consistent performance in steel and cast iron machining – order directly via Metav Werkzeuge or contact our consultants for tailored cutting data. SDGT1204AZN-F57 WKP25S indexable milling insert — Tiger·tec Silver, 15° clearance, Walter Tools The SDGT1204AZN-F57 WKP25S is a square 90° indexable insert designed for reliable material removal in steel and cast iron applications Tiger·tec Silver coating for extended tool life Optimised F57 chipbreaker for stable chips Square 90° 12 mm insert geometry 15° clearance angle for reliable cutting Consistent material removal in steel and cast iron The insert is specified for the ISO material groups P (steel) and K (cast iron), which means the grade and geometry are matched to the thermal and mechanical conditions typical of those materials. The WKP25S carbide grade, combined with the Tiger·tec Silver coating, promotes predictable wear behaviour and helps to avoid premature flank degradation. For practical terms: stable chip formation reduces the likelihood of tool-induced vibration and improves surface finish consistency, which benefits both downstream operations and overall process reliability. Longer edge life and process security through coating and chip control An abrasion-resistant, coated carbide grade provides the main contribution to tool life. The Tiger·tec Silver technology offers a balanced combination of thermal resistance and adhesion control that supports higher cutting speeds while maintaining edge integrity. The integrated chipbreaker F57 is designed to produce controllable chip shapes when cutting steels and cast irons, thereby reducing the risk of chip re-cutting and tool damage. The square 90° form and 15° clearance angle enhance rigidity and permit steady engagement, leading to lower tool-change frequency and more predictable production throughput. The SDGT1204AZN-F57 geometry is particularly useful where a robust shoulder or face milling operation is required. Simple integration and reliable repeatability in production tooling The insert’s dimensional specification — 12 mm size with thickness code 04 and tolerance class G — supports exact positioning and repeatable results in standard milling cutter pockets. As an indexable insert, it enables quick index changes to restore cutting edges without removing the whole tool body, which reduces downtime and maintenance complexity. The combination of a common square format and industry-standard ISO designation facilitates stocking and tool management within mixed-production environments, contributing to lower total cost of ownership when frequent regrinds or replacements would otherwise be necessary. Practical application guidance and selection considerations Selection of cutting parameters should reflect the workpiece material and the chosen cutter body; the grade is optimised for a wide coverage of steels and cast irons but catalogue geometry and specific cutter pocket design will determine exact performance. The optimised chip formation of the F57 breaker reduces the need for complex chip evacuation measures in many operations. If additional cutting data, compatible cutter bodies or tailored grade advice is required, technical consultation is available to align the WKP25S insert with specific process requirements and productivity goals. For sample queries or to confirm suitability for a particular machining task, contact details are provided below. Contact Metav Werkzeuge for personalised cutting data, procurement and technical consultation on Walter Tools SDGT1204AZN-F57 WKP25S indexable inserts: phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: SDGT1204AZN-F57-WKP25S-WALTER Product name: SDGT1204AZN-F57 WKP25S Product type: Indexable milling insert Manufacturer: Walter Tools Core data Insert size: 12 mm Thickness code: 04 Clearance angle: 15° Insert shape: Square 90° Tolerance class: G Grade / coating: WKP25S / Tiger·tec Silver Special features Chipbreaker: F57 Material suitability: Steel (P) and Cast iron (K) Series: Tiger-tec Silver Geometry: square 90° for rigid engagement Application focus: general milling operations in P and K groups FAQ Which materials is this insert intended for? The SDGT1204AZN-F57 WKP25S is specified for ISO groups P (steel) and K (cast iron), making it suitable for a broad range of unalloyed, alloyed steels and common cast iron grades. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP25S grade improves thermal resistance and wear behaviour, supporting higher cutting speeds and more consistent edge life under typical steel and cast iron cutting conditions. How does the F57 chipbreaker affect machining? The chipbreaker F57 is optimised to produce compact, controllable chips when cutting P and K materials, reducing chip management issues and lowering the risk of workpiece or tool damage from long, tangled swarf. Is the square 90° form suitable for shoulder milling? Yes, the square 90° insert geometry provides the rigidity and edge support required for shoulder and face milling tasks where a robust cutting edge is advantageous. What are the key dimensions and tolerance of the insert? Key dimensions include a 12 mm size and thickness code 04, with tolerance class G for consistent fit and repeatable positioning in compatible cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. They are cited exclusively for clarification and identification purposes. There is no affiliation or partnership between our company and the mentioned brands. The offered item is an original, factory-new product from the stated manufacturer.
SDGT1204AZN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for consistent edge life and reliable chip control in demanding milling operations; suitable for machining steel and cast iron and optimised for productive, repeatable results. Order the SDGT1204AZN-F57 WKP35G directly via Metav Werkzeuge or consult our technical team for cutting data and availability. SDGT1204AZN-F57 WKP35G – Milling insert, Tiger·tec Gold, for steel and cast iron | Walter Tools A high-performance SDGT1204AZN-F57 WKP35G milling insert engineered for productive roughing and semi-finishing of steel and cast iron, featuring a 15° rake and an F57 chipbreaker for stable cutting. Tiger·tec Gold coating for extended tool life Designed for machining steel and cast iron Square 90° geometry, 12 mm size 15° rake angle with F57 chipbreaker Maximise production throughput with a robust coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade supplies a well-balanced solution between wear resistance and toughness. Coated carbide technology reduces flank wear and helps maintain a stable cutting edge under higher thermal loads, which translates into longer tool life and fewer insert changes. For operations where cycle time matters, this balance lowers overall machining cost per component while preserving surface quality. Consistent chip control and secure cutting geometry With a dedicated F57 chipbreaker and a square 90° insert form, the geometry concentrates forces for predictable chip formation and evacuation. The 15° rake angle supports effective shearing in interrupted cuts and mixed chip-forming conditions commonly encountered in cast iron and alloy steels. The result is reduced vibration, steadier cutting conditions and improved tool reliability in medium to heavy milling tasks. Broad material capability tailored to common workshop demands Rated for ISO groups P (steel) and K (cast iron), the insert is suited to a wide range of unalloyed and alloyed steels as well as grey and ductile cast irons. The WKP35G grade is a coated carbide optimised for the abrasive and breakable chip behaviour of these materials; the geometry and coating work together to manage heat and wear, enabling stable performance across typical shopfloor feeds and speeds. Practical integration and process security in production lines Tolerance class G, the listed plate thickness and the 12 mm plate size ensure repeatable seating and positioning in standard cutter bodies designed for this family. The execution marked as “T” denotes the specific relief or orientation required by compatible holders. Where process stability is crucial, pairing this insert with appropriate cutter bodies and verified cutting parameters results in consistent part quality and predictable tool-change cycles. For milling operations that demand durability and reliable chip control, request availability of the Walter Tools SDGT1204AZN-F57 WKP35G from Metav Werkzeuge or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for cutting data and delivery options Technical Data Article number / SKU: SDGT1204AZN-F57-WKP35G-WALTER Product type: Milling insert (indexable insert) Brand: Walter Tools Series: Tiger·tec Gold Grade: WKP35G ISO designation: SDGT1204AZN-F57 WKP35G Dimensions & core data Insert size: 12 Thickness: 04 Free angle: 15° Geometry: Square 90° Tolerance class: G Features & applications Chipbreaker: F57 Execution: T Material suitability: Steel (P), Cast iron (K) Coating technology: Tiger·tec Gold Typical use: Roughing and semi-finishing in industrial milling FAQ What materials is this insert intended for? The SDGT1204AZN-F57 WKP35G is designed for machining steel (ISO P) and cast iron (ISO K); the WKP35G grade and its Tiger·tec Gold coating are optimised for the heat and wear characteristics of these materials. How does the F57 chipbreaker affect machining? The F57 chipbreaker controls chip shape and evacuation, improving stability during interrupted cuts and reducing the risk of chip-related surface damage when using the square 90° geometry with a 15° rake. Which series and grade does this insert belong to? This insert is part of the Tiger·tec Gold series and uses the WKP35G coated carbide grade from Walter Tools, offering a compromise between wear resistance and edge toughness for demanding milling tasks. Is the insert suitable for heavy-duty milling applications? Yes; the combination of the grade, coating and robust square geometry makes the insert appropriate for medium to heavy milling operations in steel and cast iron when paired with the correct cutter body and cutting parameters. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDGT1204AZN-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the WKP35S grade for reliable chip control and productive milling of steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application support. SDGT1204AZN-F57 WKP35S — Fräswendeschneidplatte (Square 90°, 15° clearance) by Walter Tools The SDGT1204AZN-F57 WKP35S is a square milling indexable insert designed for high-process reliability in steel and cast-iron machining, combining Tiger‑tec Silver coating technology with an optimised chipbreaker for stable cutting. Tiger‑tec Silver coated for extended tool life WKP35S grade optimised for steel and cast iron Square 90° geometry for rigidity and stability 15° clearance angle for improved chip flow and surface finish Higher process efficiency through coating and grade The Tiger‑tec Silver series brings together a modern coating technology and a robust substrate to extend tool life under continuous machining. The WKP35S grade is a coated carbide specifically tuned for the thermal and abrasive demands of machining both steel and cast iron, which means fewer interruptions for insert changes and more predictable tool performance. For production environments, this translates to higher uptime and consistent component quality. Stable cutting geometry for demanding operations A square 90° shape offers increased support in the pocket and greater resistance to radial loads, making it suitable for medium to heavy milling passes where stability is critical. The 15° clearance angle reduces rubbing at the flank and promotes controlled chip formation when paired with the F57 chipbreaker, helping to improve surface integrity while maintaining cutting forces within manageable limits. This geometry supports reliable machining cycles and repeatable finishes. Practical versatility across common materials The insert’s material applicability covers ISO group P and K: engineered for unalloyed and alloyed steel as well as cast iron. The combination of grade and chipbreaker means the insert copes well with the heat and chip morphology typical of these materials. Using this insert in appropriate cutter bodies and feeds can reduce rework and secure predictable cycle times for batch production. Designed for predictable handling and integration Marked with tolerance class G and an execution code T, the insert conforms to consistent dimensional standards for straightforward pocketing and repeatable indexing. The nominal size code 12 and thickness code 04 match common holder systems for square inserts, simplifying inventory management. The insert’s clear identifiers make tool planning and reordering efficient in a workshop environment. For tailored recommendations on integrating the Walter Tools SDGT1204AZN-F57 WKP35S into existing tool cycles or for help selecting compatible cutters and parameters, contact Metav Werkzeuge to discuss application-specific optimisation and availability. Technical Data SKU: SDGT1204AZN-F57-WKP35S-WALTER Label: Fräswendeschneidplatte SDGT1204AZN-F57 WKP35S Walter Tools Article designation: SDGT1204AZN-F57 WKP35S Manufacturer: Walter Tools Facts Size code: 12 Thickness code: 04 Clearance angle: 15° Shape: Square 90° Chipbreaker: F57 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WKP35S (coated carbide) Material applicability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suited for? The SDGT1204AZN-F57 WKP35S insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron with optimised wear and chip control. How does the Tiger‑tec Silver series benefit production? Tiger‑tec Silver coating on the SDGT1204AZN-F57 WKP35S increases wear resistance and thermal stability, resulting in longer tool life and more consistent process windows. What does the F57 chipbreaker deliver in practice? The F57 chipbreaker promotes controlled chip formation and evacuation in interrupted and continuous cuts, improving surface finish while reducing the risk of built-up edge. Is the square 90° geometry suitable for heavy milling? Yes, the square 90° form of the SDGT1204AZN-F57 WKP35S provides rigidity and support for radial loads, making it appropriate for medium to heavy milling operations where stability is required. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, new production from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com