SDHX09T3AZR-A88 WHH15X Wendeplatten - Walter Tools
Take advantage of a coated carbide grade that supports stable chip formation and long edge life together with a compact, square 90° geometry for versatile milling tasks; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SDHX09T3AZR-A88 WHH15X Fräswendeschneidplatte (Square 90°, 15°) — Walter Tools SDHX09T3AZR-A88 WHH15X is a square milling insert designed for general milling applications where reproducible performance and chip control are required Coated carbide grade WHH15X for general machining Square 90° form for versatile milling 15° relief angle for good chip control Chipbreaker A88 for stable chip formation Reduced downtime through consistent cutting behaviour The coated carbide WHH15X grade delivers a balance between wear resistance and toughness, making it suitable for a range of milling strategies where predictable tool life matters. The combination of the A88 chipbreaker and the coating technology promotes stable chip formation, which reduces the risk of interrupted cuts and machine downtime. This stability supports process reliability and helps to maintain cycle times across repeat production runs. Precise geometry for repeatable results and secure clamping The square 90° form and 15° relief angle provide a compact geometry that is easy to seat and index in standard milling toolholders. The T3 thickness and tolerance class H ensure dimensional consistency between inserts, supporting quick replacement and repeatable set-ups. As a result, machinists benefit from reliable contact with the toolholder and consistent cutting engagement, which contributes to improved surface quality and reduced rework. Application guidance and selection advice This grade is part of the Walter Schneidstoffsorte series and is specified as a coated carbide insert; the suitability for particular workpiece materials should be verified against the product matrix. The insert performs well in general milling tasks where coated carbide is indicated, but selection must account for cutting parameters, machine rigidity and workpiece material. For unfamiliar materials or high-demand operations, consult the product matrix or our technical advisors to match grade, geometry and machining strategy. Production advantages and supply convenience Using a standardized insert such as this one supports streamlined stock management and fast tool changes on the shop floor. The compact square shape offers four usable cutting edges, providing economical edge utilisation and helping to lower tooling costs per component. Backed by Walter Tools’ focus on stable cutting edges and process consistency, this insert supports efficient machining cycles and dependable results in industrial production environments. For tailored advice on integrating the WHH15X insert into production workflows, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — to discuss availability and application-specific recommendations Technical data Article number: SDHX09T3AZR-A88-WHH15X-WALTER Label: Fräswendeschneidplatte SDHX09T3AZR-A88 WHH15X Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade: WHH15X Facts Relief angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Chipbreaker: A88 Tolerance class: H Special features Material: Coated carbide (beschichtetes Hartmetall) Series: Walter Schneidstoffsorte - Serie offen Version: X Designation without grade: SDHX09T3AZR-A88 ISO designation: SDHX09T3AZR-A88 WHH15X FAQ What cutting applications are suitable for this insert? The insert is designed for general milling applications; the SDHX09T3AZR-A88 WHH15X should be matched to the workpiece material using the manufacturer product matrix for optimal results. How many cutting edges are available per insert? With a square 90° geometry, each insert offers four usable cutting edges before indexing is required. What does the A88 chipbreaker provide? The A88 chipbreaker is engineered to promote stable chip formation, improving process reliability and reducing the likelihood of cut interruptions. Is the WHH15X grade suitable for finishing operations? The WHH15X coated carbide grade can be used for a range of operations; finishing suitability depends on cutting conditions and the workpiece material, which should be checked in the product matrix. Can the insert be used with standard toolholders? Yes — the square 90° form and standard dimensions allow use in conventional milling toolholders designed for this insert style, subject to toolholder compatibility checks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the brands listed. The offered item is original and factory-new.
SDHX09T3AZR-A88 WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the A88 chipbreaker for a longer tool life and consistent chip control; order the insert via Metav Werkzeuge or consult our specialists for application-specific guidance. SDHX09T3AZR-A88 WPM15G milling indexable insert by Walter Tools — Tiger·tec Gold, 15° clearance The SDHX09T3AZR-A88 WPM15G is a square 90° milling indexable insert engineered for productive milling operations where consistent swarf formation and tool life are priorities. Tiger·tec Gold coating for enhanced tool life Square 90° insert for robust milling operations 15° clearance angle for stable chip control A88 chipbreaker for consistent swarf formation Increased productivity through advanced coating technology The insert is equipped with the Tiger·tec Gold coating and the WPM15G grade, a combination designed to extend durability under demanding cutting conditions. This coated carbide construction reduces flank wear and supports longer cutting intervals, which translates into fewer tool changes and higher machine uptime. For production environments aiming to reduce cycle time and increase output, the coating technology provides a measurable increase in process stability without compromising dimensional accuracy. Stable chip formation and process security The integrated A88 chipbreaker and the 15° clearance geometry ensure controlled chip flow and reduced risk of built-up edge. The combination of a defined chipbreaker design and the square 90° form leads to predictable swarf behaviour, lowering the chance of machine interruptions and improving surface finish quality. These geometry features are particularly beneficial for repetitive milling tasks where consistent results and minimal rework are essential. Repeatable positioning and tolerance assurance With a tolerance class H, size designation 09 and thickness T3, the insert provides reliable positioning in standard toolholders and repeatable seating for multi-edge use. The robust square format and defined thickness support secure clamping and even load distribution during heavy-side milling. This repeatability helps maintain process consistency across batches and supports quality assurance procedures in serial production. Application guidance and material suitability The WPM15G grade belongs to Walter Tools’ coated hardmetal family; material suitability should be verified against the specific product matrix before selection. The insert is intended for productive milling tasks across diverse machining scenarios, but availability of the correct grade and the precise cutting data must be checked in the technical matrix. For bespoke material combinations or unusual alloys, consult the product matrix or our technical advisors to determine optimal cutting data and expected tool life. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to discuss the SDHX09T3AZR-A88 WPM15G application in the production process — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: SDHX09T3AZR-A88-WPM15G-WALTER Article name: Fräswendeschneidplatte SDHX09T3AZR-A88 WPM15G Designation: SDHX09T3AZR-A88 WPM15G Series: Tiger-tec Gold Grade: WPM15G Execution: X Facts Clearance angle: 15° Shape: Square 90° Size: 09 Thickness: T3 Tolerance class: H Special features Coating technology: Tiger·tec Gold Chipbreaker: A88 Format: Quadrate 90° Grade type: Coated hardmetal Note: Verify material suitability in the product matrix FAQ What materials is this insert suitable for? Material suitability must be checked in the manufacturer’s product matrix; the SDHX09T3AZR-A88 WPM15G by Walter Tools is a coated hardmetal grade intended for productive milling, but exact workpiece materials require verification against the matrix. How does the A88 chipbreaker affect machining? The A88 chipbreaker on the SDHX09T3AZR-A88 WPM15G promotes consistent chip formation and controlled swarf flow, increasing process stability and improving surface finish in repetitive milling tasks. Can this insert be used in standard indexable milling cutters? Yes, the square 90° form and T3 thickness enable integration in compatible indexable milling cutters; ensure the toolholder matches the insert size 09 and tolerance class H for secure seating. What benefits does Tiger·tec Gold provide? Tiger·tec Gold coating on the WPM15G grade enhances wear resistance and flank life, supporting longer cutting intervals and improved productivity in serial machining. Is cutting data available for this insert? Cutting data and recommended parameters are provided in the Walter Tools product matrix; consult those data sheets or contact Metav Werkzeuge for application-specific recommendations. How many cutting edges are usable per insert? The number of usable edges depends on the insert geometry and wear patterns; the SDHX09T3AZR-A88 WPM15G is designed for multiple indexings—inspect each edge for wear and follow standard reconditioning practices. Does the tolerance class H require special tool clamping? Tolerance class H indicates the manufacturing tolerance for the insert; use toolholders specified for the insert size and tolerance to ensure repeatable seating and accurate machining results. Are there alternative chipbreakers for different applications? Walter Tools offers various chipbreaker geometries; for applications requiring different swarf characteristics, refer to the product range or contact Metav Werkzeuge for matching recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer.
SDHX1204AZR-A88 WAK15 Wendeplatten - Walter Tools
Benefit from the combination of precise uncoated carbide edges, the A88 chipbreaker and a 15° relief that together ensure clean chip evacuation and consistent surface quality in aluminium milling; order the SDHX1204AZR-A88 WAK15 directly via Metav Werkzeuge or ask our consultants if needed. SDHX1204AZR-A88 WAK15 — Milling indexable insert for aluminium and non‑ferrous metals, Walter Tools The SDHX1204AZR-A88 WAK15 is a square indexable insert designed for high‑performance face and shoulder milling of aluminium and other non‑ferrous metals within the Walter N‑series system Optimised for aluminium and non‑ferrous metals Uncoated carbide WAK15 for sharp cutting edges Square 90° form with 15° relief A88 chipbreaker for reliable chip control Consistent, burr‑free finishes for non‑ferrous work The grade WAK15 is an uncoated carbide designed for machining aluminium and similar non‑ferrous alloys; this material choice provides a very sharp cutting edge and reduces the tendency for built‑up edge formation. The A88 chipbreaker promotes controlled fragmentation and evacuation of chips, which directly improves surface quality and reduces secondary finishing. For operations where material adhesion and thermal build‑up are the primary concerns, this insert delivers measurable process stability and repeatable results. Stable cutting geometry for repeatable tool life A 90° square form combined with a 15° relief produces a robust cutting corner that tolerates intermittent engagement and shoulder milling. The geometry minimises rubbing behind the cutting edge and helps to maintain a consistent radial and axial load distribution, which supports repeatable tool life and predictable wear. The insert’s execution code and tolerance class indicate suitability for standard toolholders in the Walter N‑series, enabling straightforward insertion and secure clamping for demanding production cycles. Easy integration into production and clear material guidance Belonging to the Walter N‑series, the insert supports fast tool changes and indexable use, making it suitable for batch production or flexible cell environments. The material designation N and the ISO guidance refer explicitly to non‑ferrous workpieces (see ISO 513), so the component is recommended for aluminium, copper alloys and similar substrates where sharp geometry and low friction are priorities. For cutting parameters, cooling strategies and optimisation of feed rates, Metav Werkzeuge can supply application data and recommend compatible toolholders to integrate the insert into existing processes. Contact Metav Werkzeuge for tailored cutting data and immediate availability of Walter Tools WAK15 inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com for specialist advice and delivery coordination Technical data Article number: SDHX1204AZR-A88-WAK15-WALTER SKU: SDHX1204AZR-A88-WAK15-WALTER Designation: SDHX1204AZR-A88 WAK15 Facts Relief angle: 15° Form angle: 90° square Size code: 12 Thickness code: 04 Tolerance class: H Special features Grade: WAK15 (uncoated carbide) Chipbreaker: A88 Series: Walter N‑series Execution: X Material code: N Application: Aluminium and non‑ferrous metals (ISO 513) FAQ What materials is this insert suitable for? The SDHX1204AZR-A88 WAK15 insert is intended for aluminium and other non‑ferrous metals as specified by the N designation and ISO 513, offering reduced built‑up edge and good surface quality. Is the cutting grade coated? No, the WAK15 grade is an uncoated carbide designed to provide very sharp cutting edges for soft, adhesive materials; this is why it is recommended for aluminium machining. What does the A88 chipbreaker do? The A88 chipbreaker controls chip shape and evacuation, reducing the risk of entanglement and improving surface finish during continuous and interrupted milling with the insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names (Walter Tools) are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer.
SDHX1204AZR-A88 WHH15X Wendeplatten - Walter Tools
Benefit from the combination of a WHH15X coated carbide grade, a 15° relief angle and the A88 chipbreaker for reliable, controlled milling performance. Order the SDHX1204AZR-A88 WHH15X milling insert directly via Metav Werkzeuge or consult our specialists to confirm material suitability. SDHX1204AZR-A88 WHH15X milling indexable insert — 15° relief, square 90° (Walter Tools) A SDHX1204AZR-A88 WHH15X milling insert engineered for stable face and shoulder milling, where a coated carbide grade and a dedicated A88 chipbreaker support consistent chip control across varying feed conditions Coated carbide grade WHH15X 15° relief angle for versatile cutting Square 90° insert for stable milling A88 chipbreaker for controlled chip formation Higher process reliability through material and geometry The combination of a WHH15X coated carbide substrate and a defined 15° relief creates a balance between edge strength and cutting aggressiveness, which is valuable for many milling operations. The coated hardmetal composition is specified in the product matrix and is designed to improve wear resistance; as a result, tool life can be stabilised under repetitive cycles. The insert geometry, presented in a square 90° format, reduces vibration and supports consistent cut engagement on shoulders and face milling tasks. Predictable chip control and surface quality Equipped with the A88 chipbreaker, the insert is optimised to break chips reliably and reduce the risk of long stringy swarf. This feature promotes safer evacuation of chips and helps to maintain surface integrity, which is particularly relevant in automated or high-volume production. The controlled chip formation offered by this design contributes to process security and reduces the need for manual intervention, supporting stable production cycles. Practical handling, inspection and application guidance The SDHX1204AZR-A88 WHH15X insert is supplied in a standard square 90° format with a thickness code 04 and size 12, simplifying toolholder selection and inventory management. Tolerance class H ensures dimensional consistency for repeatable set-ups. For exact workpiece compatibility, material suitability should be verified against the detailed product matrix; this enables selection of the most economical cutting data while maintaining surface finish requirements and tool life expectations. Contact Metav Werkzeuge for tailored cutting data, availability and application advice for Walter Tools WHH15X inserts — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: SDHX1204AZR-A88-WHH15X-WALTER Article designation: SDHX1204AZR-A88 WHH15X Manufacturer: Walter Tools Product type: milling indexable insert Specifications Free angle: 15° Plate size: 12 Plate thickness: 04 Plate form: Quadrate 90° Tolerance class: H Materials & features Carbide grade: WHH15X (coated hardmetal) Chipbreaker: A88 Series: Walter Schneidstoffsorte - Serie offen Execution: X Base designation: SDHX1204AZR-A88 FAQ What materials is the SDHX1204AZR-A88 WHH15X suitable for? Material suitability must be checked in the product matrix; the SDHX1204AZR-A88 WHH15X insert is a coated hardmetal grade intended for a range of applications, and specific workpiece materials should be verified against the manufacturer's recommendations. How does the A88 chipbreaker affect milling performance? The A88 chipbreaker on the SDHX1204AZR-A88 WHH15X promotes controlled chip formation and easier evacuation, which helps to maintain surface quality and reduces interruptions in automated milling processes. Which toolholders accept this insert geometry? Square 90° insert seats compatible with size 12 and thickness code 04 will accept the SDHX1204AZR-A88 WHH15X; toolholder selection should follow the tool manufacturer’s mounting specifications. Is the WHH15X grade coated and what benefit does that provide? Yes, WHH15X is a coated hardmetal grade; the coating improves wear resistance and contributes to longer, more predictable tool life under many milling conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are mentioned exclusively for explanation and identification. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original, brand-new merchandise of the respective manufacturer.
SDHX1204AZR-A88 WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and the Tiger·tec Gold coating for consistent productivity in milling operations; the WPM15G grade and A88 chipbreaker ensure controlled chip formation and long tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for cutting-parameter recommendations. SDHX1204AZR-A88 WPM15G — Indexable Milling Insert by Walter Tools (Tiger·tec Gold, 15° clearance) The SDHX1204AZR-A88 WPM15G is a square, 90° indexable milling insert designed for general and semi-finishing applications where stable chip control and predictable wear behaviour are required. Tiger·tec Gold coating for high productivity WPM15G: coated carbide grade for broad applications Square 90° shape for versatile milling strategies 15° clearance angle for controlled cutting geometry Maximise productivity with advanced coating and chip control The combination of the Tiger·tec Gold surface treatment and the WPM15G coated carbide matrix delivers a balance of wear resistance and toughness that is suited for a wide range of materials. The A88 chipbreaker is engineered to shape chips reliably, reducing the risk of re-cutting and improving process stability. These technical choices result in fewer tool changes and longer uninterrupted machining cycles, which directly supports higher throughput and lower per-part costs. Explanations such as “coated carbide” indicate a hard substrate with thin, engineered layers that improve thermal and mechanical performance. Precision by design: geometry that supports accurate milling The insert’s square 90° form and 15° clearance provide a predictable cutting geometry that eases programming and fixture planning. A square insert enables multiple indexing positions and straightforward approach angles for face and shoulder milling, while the specified clearance angle helps to avoid rubbing and ensures a clean cutting engagement. For operations where dimensional consistency matters, this geometry contributes to repeatable surface finish and dimensional control. The indexable design allows quick replacement, keeping machine downtime to a minimum. Practical selection and application guidance for machining tasks The grade WPM15G belongs to a coated-carbide family within the Tiger·tec Gold series and is intended for productive machining across a broad material range; users should consult the product matrix to confirm suitability for specific alloys. The designation indicates a balance between edge robustness and thermal resistance—beneficial for mixed-production shops handling varied component batches. When selecting cutting data, consider the chipbreaker function and insert size to match feed per tooth and axial depth for stable chip evacuation. Technical support and tested parameter sets are available to aid integration into existing processes. Contact Metav Werkzeuge for tailored cutting-parameter advice and immediate availability of Walter Tools SDHX1204AZR-A88 WPM15G inserts Technical data Article number: SDHX1204AZR-A88-WPM15G-WALTER Name: SDHX1204AZR-A88 WPM15G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Insert size: 12 Thickness: 04 Clearance angle: 15° Shape: Square 90° Chipbreaker: A88 Grade: WPM15G Tolerance class: H Version: X Special features Coating: Tiger·tec Gold Material: Coated carbide Design: Indexable milling insert Application note: Check product matrix for material suitability FAQ What materials is the SDHX1204AZR-A88 WPM15G suitable for? The SDHX1204AZR-A88 WPM15G is designed as a versatile, coated-carbide insert within the Tiger·tec Gold range; suitability for specific materials should be verified against the product matrix and machining parameters. How does the A88 chipbreaker affect machining performance? The A88 chipbreaker on this insert shapes chips to promote controlled evacuation and reduced re-cutting, which improves process stability and can extend effective tool life. How many indexing positions are available with this square insert? A square 90° insert typically offers four indexing positions; the SDHX1204AZR-A88 enables multiple repositions to maximise usable edge life before replacement. Is the insert compatible with standard milling cutters? The insert is an indexable type intended for compatible milling cutter holders specifying the SDHX1204AZR geometry; cutter and clamping compatibility should be confirmed with the toolholder manufacturer. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances thermal resistance and wear performance, supporting higher cutting speeds and stable operation in mixed-production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names belong to their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
SDMT06T204-D51 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP25S grade for extended tool life and consistent chip formation; the square 90° geometry with r0.4 ensures edge strength and repeatable performance. Order the SDMT06T204-D51 WKP25S via Metav Werkzeuge or contact our consultants for tailored application advice. SDMT06T204-D51 WKP25S milling insert (square 90°, r0.4) — Walter Tools A SDMT06T204-D51 WKP25S milling insert engineered for productive machining of steel and cast iron in general milling operations. Tiger‑tec Silver coating Suitable for steel and cast iron Square 90° geometry, r0.4 Chipbreaker D51 for stable chip control High productivity through advanced coating and grade The combination of Tiger‑tec Silver technology and the WKP25S grade provides coated carbide performance tailored to the thermal and abrasive demands of steel and cast iron. This results in improved wear resistance and tool life, which reduces changeover frequency and supports uninterrupted production cycles. The coated surface helps maintain a stable cutting edge under variable loads, contributing to consistent component quality and lower overall machining costs. Reliable chip control and robust edge geometry The chipbreaker D51 is designed to produce controllable chips in a wide range of milling conditions, improving evacuation and reducing the risk of built-up edge. The square 90° form combined with an r0.4 corner radius provides a balance between edge strength and surface finish, making the insert suitable for medium finishing and shoulder milling where repeatability matters. The tolerance class M assures dimensional consistency for predictable assembly and easier process planning. Application guidance and process security for P and K materials Designed for the ISO groups P (steel) and K (cast iron), this insert is optimised for the chip types and wear behaviour typical of these materials. ISO group designations indicate the intended workpiece families rather than the insert material, so selection should match the specific steel or cast iron grade and the machining strategy. For process security, pair the insert with appropriate cutter bodies and feeds to exploit the grade’s capability for stable cutting and consistent surface quality. For application-specific recommendations on Walter Tools inserts such as the SDMT06T204-D51 WKP25S and to confirm suitability for particular steel or cast iron operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert, personalised advice and availability. Technical data SKU: SDMT06T204-D51-WKP25S-WALTER Label: Fräswendeschneidplatte SDMT06T204-D51 WKP25S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Silver Grade: WKP25S ISO designation: SDMT06T204-D51 WKP25S Core specifications Corner radius: 0.4 mm Clearance angle: 15° Insert shape: square 90° Chipbreaker: D51 Size designation: 06 Thickness: T2 Tolerance class: M Materials & features Coating/grade: Tiger‑tec Silver (coated carbide) Suitable for: Steel (ISO P), Cast iron (ISO K) Cutting grade: WKP25S Material code: P / K Execution: T Sort description: WKP25S – coated carbide for steel and cast iron FAQ Which workpiece materials are recommended for this insert? The SDMT06T204-D51 WKP25S insert from Walter Tools is recommended for steel (ISO P) and cast iron (ISO K) applications; the WKP25S grade and Tiger‑tec Silver coating are optimised for these material groups. What does the D51 chipbreaker provide in practice? Chipbreaker D51 delivers controlled chip formation and improved evacuation, reducing the likelihood of clogging and supporting stable cutting behaviour with consistent surface results when machining steels and cast irons. How does the r0.4 corner radius influence machining results? An r0.4 corner radius increases edge robustness and helps achieve a better surface finish in medium finishing passes; it also extends edge life compared with smaller radii under intermittent loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
SDMT06T204-D51 WKP35G Wendeplatten - Walter Tools
Take advantage of high wear resistance and stable chip control for consistent production results; the coated carbide grade and precise geometry reduce tool changes and support predictable cycle times. Order directly via Metav Werkzeuge or consult our technical advisors for cutting-parameter recommendations. SDMT06T204-D51 WKP35G — Indexable milling insert, Tiger·tec Gold, for steel & cast iron · Walter Tools SDMT06T204-D51 WKP35G is a square indexable milling insert designed for productive machining of steels and cast iron with a Tiger·tec Gold coated carbide grade. Tiger·tec Gold coating for enhanced wear resistance Optimised for steel and cast iron applications Square 90° insert with 0.4 mm corner radius Improved process security when machining steels and cast iron The coated carbide grade WKP35G from the Tiger·tec Gold family is formulated to deliver consistent wear resistance across common operations with steel (ISO group P) and cast iron (ISO group K). The advanced coating technology supports a stable cutting edge at elevated temperatures, which reduces flank wear and preserves dimensional accuracy over longer tool life. For production environments this translates into fewer tool changes, more predictable component tolerances and improved overall equipment effectiveness. Geometry that balances edge strength and surface quality A square 90° geometry combined with a 0.4 mm corner radius offers a robust cutting edge for shoulder milling and general facing operations while maintaining a good surface finish. The 15° clearance angle reduces friction on the flank face, lowering heat generation and the risk of built-up edge. The integrated chip former D51 promotes controlled chip breakage and evacuation, decreasing the likelihood of rework and supporting higher feed rates within recommended parameters. Seamless integration into indexable tooling systems As an indexable milling insert, the component allows fast indexing and minimises downtime compared with solid tools. The insert thickness and seating design (T2) ensure secure clamping in standard toolholders, enabling repeatable positioning and reliable run-out behaviour. The combination of coated carbide chemistry and optimised chip control makes the insert suitable for a range of milling strategies where stable tool life and process reproducibility are required, particularly in batch production and mixed-series machining. Contact Metav Werkzeuge today to discuss how this Walter Tools Tiger·tec Gold insert can increase machining uptime and to request cutting data tailored to the application Technical data Article number: SDMT06T204-D51-WKP35G-WALTER Designation: SDMT06T204-D51 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Numbers / core technical data Corner radius: 0.4 mm Clearance angle: 15° Plate size: 06 Plate thickness: T2 Tolerance class: M Designs / special features Square 90° plate form Chip former: D51 Coating / technology: Tiger·tec Gold (coated carbide) Material suitability: P (steel), K (cast iron) Execution: T (type designation) FAQ What materials can this insert machine? The SDMT06T204-D51 WKP35G indexable milling insert from Walter Tools is suitable for steel (P) and cast iron (K) in accordance with ISO 513, offering tailored performance for these material groups. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; this provides a compromise between edge strength and surface finish, reducing chipping risk while maintaining acceptable workpiece quality. Which coating and grade does the insert use? The grade is WKP35G, part of the Tiger·tec Gold coating technology; it is a coated carbide designed for enhanced wear resistance and stable cutting edges. What geometry does the insert feature for milling operations? Geometry features include a square 90° plate form, 15° clearance angle and a dedicated D51 chip former to support controlled chip breakage and evacuation. What is the article number or SKU for ordering? The SKU for ordering is SDMT06T204-D51-WKP35G-WALTER, which identifies the Walter Tools indexable milling insert and its grade. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer Walter Tools.
SDMT06T204-D51 WPP35G Wendeplatten - Walter Tools
Benefit from the combination of high productivity and extended tool life offered by the Tiger·tec Gold WPP35G grade and the SDMT06T204-D51 geometry; optimised chip control reduces rework and keeps cycles stable. Order the SDMT06T204-D51 WPP35G directly via Metav Werkzeuge or ask our consultants if needed. SDMT06T204-D51 WPP35G Milling Insert (coated carbide, for steel) — Walter Tools The SDMT06T204-D51 WPP35G is a square milling indexable insert designed for productive steel machining, offering a Tiger·tec Gold coating and an optimised D51 chipbreaker. Tiger·tec Gold coated carbide Optimised D51 chipbreaker for steels Square 90° form with 0.4 mm radius Medium tolerance class M for consistent fit Higher productivity through modern coating technology The combination of the Tiger·tec Gold coating and a coated carbide substrate gives the insert a balance of wear resistance and toughness that is tailored to steel machining. The coating reduces adhesion and thermal damage during cutting, which extends tool life and maintains cutting-edge integrity under repetitive loads. As a result, machining cycles remain stable for longer, decreasing tool changes and increasing overall throughput. The design is intended to support both roughing and semi-finishing passes where consistent performance and predictable wear are required. Consistent chip control and improved surface quality The D51 chipbreaker is engineered for effective chip control when cutting ISO P materials. By producing manageable chip shapes and evacuating swarf reliably, the insert reduces the risk of recutting and surface defects. The 15° relief (clearance) and square 90° form combined with a corner radius of 0.4 mm contribute to dimensional stability and a predictable cutting load. The relief angle prevents rubbing on the workpiece, while the corner radius balances edge strength and the ability to achieve an acceptable surface finish without excessive cutting forces. Predictable integration and process reliability Designed to the SDMT06T204-D51 designation, the insert fits established toolholders and systems, and its tolerance class M supports repeatable seat fit and consistent indexability. The grade targets ISO P (steel) applications, making the geometry and material pairing a dependable choice for a wide range of unalloyed and alloyed steels. The plate thickness T2 and size code 06 indicate a compact yet robust insert suited to medium-duty milling operations where reliable mechanical seating and stable repeatability are priorities. Application pointers to optimise performance For best results, select cutting parameters that reflect the component material and operation type; the insert is particularly effective where good swarf formation and thermal stability are required. The WPP35G grade is formulated for steel, offering a spectrum from wear-resistant to more ductile performance within its subgroup, which helps when encountering mixed batch materials or varying hardness. If specific cutting speeds, feeds or coolant strategies are needed for a production setup, technical advice is available to align the insert choice with process requirements and minimise trial-and-error. Choose the Walter Tools Tiger·tec Gold WPP35G grade for predictable, productive milling of steel — contact Metav Werkzeuge for tailored application advice and prompt supply by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SDMT06T204-D51-WPP35G-WALTER Designation: SDMT06T204-D51 WPP35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.4 mm Shape: Square 90° Size designation: 06 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: D51 Material application: Steel (ISO P) Execution: T Suitable for general steel machining FAQ What materials is this insert suitable for? The SDMT06T204-D51 WPP35G is optimised for steel (ISO P); the WPP35G grade is tuned to manage the typical heat and chip formation encountered in steel machining. How does the D51 chipbreaker affect machining? The D51 chipbreaker improves chip control for steel applications, producing manageable swarf and helping to maintain consistent surface quality while reducing the risk of recutting. What does the 0.4 mm corner radius mean for performance? A 0.4 mm corner radius balances edge strength and finish capability: it provides robustness for interrupted cuts while still allowing acceptable surface results in medium-duty milling. Is the insert compatible with standard toolholders? The SDMT06T204-D51 designation and tolerance class M ensure compatibility with corresponding toolholder systems designed for SDMT-format inserts, enabling straightforward integration and repeatable seating. Where can detailed cutting data be obtained? Cutting data and tailored application advice for the SDMT06T204-D51 WPP35G are available through Metav Werkzeuge, which can provide recommendations based on part material and operation type. Manufacturer: Walter AG; headquarters Tübingen, Germany. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. The offered item is original, factory-new goods of the manufacturer.
SDMT06T204-D51 WSP45G Wendeplatten - Walter Tools
Fräswendeschneidplatte SDMT06T204-D51 WSP45G von Walter Tools Die SDMT06T204-D51 WSP45G ist eine PVD-beschichtete Fräswendeschneidplatte für produktive Fräsanwendungen an Stahl, rostfreiem Stahl und hitzebeständigen Legierungen PVD-beschichtetes Hartmetall für lange Standzeit Geeignet für Stahl, rostfreien Stahl und Superlegierungen Quadrat 90° mit 0,4 mm Eckenradius Freiwinkel 15° für stabile Zerspanung Spanbrecher D51 für kontrollierte Spanbildung Maximale Produktivität bei variablen Werkstoffen Die Wendeschneidplatte überzeugt durch ihre Tiger·tec Gold-Beschichtung, die speziell für vielseitige Fräsanwendungen entwickelt wurde. Durch die Kombination aus zäher Schneidstoffbasis und PVD-Beschichtung entsteht eine ausgewogene Balance aus Verschleißfestigkeit und Wärmebeständigkeit, was zu längeren Werkzeugstandzeiten und reduzierten Rüstzyklen führt. Anwender profitieren von konstanter Leistung bei wechselnden Schnittbedingungen und verbesserter Prozesssicherheit, was insbesondere in Serienfertigungen und in der Feinbearbeitung wirtschaftliche Vorteile bringt Robuste Beschichtung und stabile Schneidkante Die Sorte WSP45G steht für beschichtetes Hartmetall mit optimierter Schneidkantenstabilität. Die PVD-Beschichtung reduziert Aufbauschneiden und minimiert thermisch bedingten Verschleiß, wodurch sich die Oberflächengüte der Werkstücke verbessert. Diese Eigenschaften erlauben höhere Schnittwerte bei gleichzeitig vorhersehbarer Werkzeugevolution, sodass weniger Zwischenprüfungen erforderlich sind. Für Betriebe bedeutet das: höhere Produktivität und planbare Kosten pro Bauteil Präzise Geometrie sorgt für reproduzierbare Ergebnisse Die Geometrie der Platte mit Quadrat 90°, Eckenradius 0,4 mm und Freiwinkel 15° ist auf stabile Spanbildung und vibrationsarme Bearbeitung ausgelegt. Der Spanbrecher D51 sorgt für kurze, kontrollierte Späne bei Stahl, rostfreiem Stahl und hitzebeständigen Legierungen, was die Prozesssicherheit erhöht und das Spänemanagement erleichtert. Mit dieser Kombination lassen sich wiederholgenaue Konturen und konstante Oberflächen erzielen, was besonders bei anspruchsvollen Toleranzen von Vorteil ist Zielgruppe und Einsatzempfehlung für produktive Fertigung Entwickelt für Lohnfertiger, Serienproduzenten und anspruchsvolle Werkstätten, bietet die SDMT06T204-D51 WSP45G eine zuverlässige Lösung für anspruchsvolle Fräsaufgaben. Besonders dort, wo wechselnde Werkstoffe und lange Bearbeitungszeiten die Wirtschaftlichkeit beeinflussen, zeigt die Platte ihre Stärken. Durch die robuste Beschichtung und die durchdachte Geometrie eignet sich das Produkt sowohl für Hochleistungsfräsen als auch für feinere Schnittbedingungen, bei denen Oberflächengüte und Prozessstabilität zählen Empfehlung: Für produktive Fräsoperationen die Tiger-tec Gold Sorte von Walter Tools wählen; bei Detailfragen technische Beratung anfordern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: SDMT06T204-D51-WSP45G-WALTER Marke: Walter Tools Baureihe: Tiger-tec Gold Typ: Fräswendeschneidplatte Daten Freiwinkel: 15° Eckenradius: 0,4 mm Plattendicke: T2 Plattenform: Quadrat 90° Plattengröße: 06 Toleranzklasse: M Besonderheiten Spanbrecher: D51 Sorte: WSP45G Beschichtung: Tiger·tec Gold (PVD-beschichtet) Materialangabe: P / M / S Ausführung: T FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die SDMT06T204-D51 WSP45G von Walter Tools ist ausgelegt für Stahl, rostfreien Stahl und hitzebeständige Superlegierungen beziehungsweise Titan, entsprechend der Materialangabe P / M / S Welche Vorteile bietet die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung (PVD) verbessert die Verschleißfestigkeit und thermische Beständigkeit, was zu längerer Standzeit und stabilerer Spanbildung führt Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius von 0,4 mm ermöglicht eine gute Kantenausbildung bei gleichzeitiger Stabilität der Schneide; das Resultat ist eine konstante Oberflächengüte bei wiederholten Bearbeitungen Ist die Platte für Hochgeschwindigkeitsfräsen geeignet? Die Kombination aus PVD-beschichtetem Schneidstoff und stabiler Geometrie macht die SDMT06T204-D51 WSP45G für hohe Schnittbedingungen geeignet, wobei Schnittwerte an Maschinen- und Werkstoffverhältnisse anzupassen sind Welche Rolle spielt der Spanbrecher D51 in der Praxis? Der Spanbrecher D51 sorgt für kurze, kontrollierte Späne und verbessert das Spänemanagement, was die Prozesssicherheit und die Standzeit bei Materialien mit schwieriger Spanbildung erhöht Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SDMT06T204-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, proven chip control and precise square geometry for efficient cast iron machining; the robust WKK25G grade delivers stable wear behaviour and predictable life. Order the SDMT06T204‑D57 WKK25G milling insert directly via Metav Werkzeuge or ask the consultants if needed. SDMT06T204‑D57 WKK25G milling insert — Square 90°, Tiger‑tec Gold for cast iron (Walter Tools) The SDMT06T204‑D57 WKK25G is a square milling insert engineered for productive shoulder and face milling of cast iron components, offering reliable chip control and long tool life for series production Tiger‑tec Gold coated cutting grade WKK25G Optimised D57 chipbreaker for cast iron Square 90° geometry with 0.4 mm corner radius Tolerance class M for consistent interchangeability Consistent performance on abrasive cast iron The coated carbide grade WKK25G (part of the Tiger‑tec Gold series) is formulated for abrasive cast iron applications; the coating increases resistance to abrasive wear and supports stable cutting edge life. The integrated D57 chipbreaker promotes short, controlled chips typical of brittle cast materials, which reduces the risk of entanglement and improves process security. For production environments this means fewer interruptions, more consistent surface quality and a reduced need for frequent insert changes. Geometry that ensures accurate shoulder and corner finishes The square 90° insert form combined with a 0.4 mm corner radius and a 15° clearance angle is designed to produce clean shoulder faces and robust corner reinforcement. The modest corner radius balances edge strength and achievable surface finish; sharper radii improve detail, while larger radii enhance edge stability. The tolerance class M guarantees repeatable seat fit and positioning accuracy in the cutter body, which simplifies tool setup and reduces variation between insert changes. Integration into stable, high‑throughput tooling systems With form factor SDMT06T204‑D57 and a standard thickness of T2, this insert fits conventional square‑insert milling cutters used in medium‑ to high‑volume operations. The coated grade and chipbreaker combination aims for reliable life across batch runs, supporting predictable maintenance cycles and planning. Walter Tools’ manufacturing standards contribute to consistent dimensional accuracy and coating quality, which helps maintain stable machining parameters over time. Practical selection and machining guidance The insert is optimised for cast iron applications; the WKK25G grade resists abrasive particles and copes well with the short, fracturing chips typical of grey and nodular cast irons. For best results, pair the insert with a rigid cutter body and stable workholding. The D57 chipbreaker is intended for interrupted and continuous cuts producing short chips—this improves evacuation and reduces the need for special chip handling. For cutting parameters tailored to a specific machine, material grade and depth of cut, consult the technical advisors at Metav Werkzeuge. Contact Metav Werkzeuge today for tailored application advice on Walter Tools Tiger‑tec Gold inserts and to discuss suitable cutter bodies and batch optimisation for the SDMT06T204‑D57 WKK25G Technical Data Article number: SDMT06T204‑D57‑WKK25G‑WALTER Description: Milling insert SDMT06T204‑D57 WKK25G (Walter Tools) Manufacturer: Walter Tools Facts Insert size: 06 Corner radius: 0.4 mm Clearance angle: 15° Plate form: Square 90° Plate thickness: T2 Chipbreaker: D57 Tolerance class: M Grade/series: WKK25G, Tiger‑tec Gold Special features Coating: Tiger‑tec Gold (coated carbide) Material application: Cast iron (K) Execution: T Suitable for shoulder and face milling Stable chip control for short chips FAQ What materials is this insert intended for? The SDMT06T204‑D57 WKK25G insert is designed primarily for cast iron; the WKK25G grade and D57 chipbreaker are optimised for abrasive, brittle materials in group K. How does the D57 chipbreaker affect machining? The D57 geometry produces short, controlled chips characteristic of cast iron machining, improving chip evacuation and reducing the risk of chip re‑cutting with the Walter Tools insert. What does tolerance class M mean for tool changeovers? Tolerance class M indicates consistent dimensional accuracy for the insert seat, enabling reproducible seating and reduced variation during insert replacements in the cutter body. Is this insert suitable for heavy interrupted cuts? The square 90° geometry with a 0.4 mm corner radius offers good edge strength for many interrupted cuts; for severe interruptions, adapt cutting parameters and ensure rigid clamping to protect the insert edge. Which cutter bodies accept the SDMT06T204‑D57 insert? Standard milling cutters designed for SDMT‑type square inserts and T2 thickness will accept the SDMT06T204‑D57 WKK25G; verify seat compatibility and torque specifications with the cutter manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Manufacturers' trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between Metav Werkzeuge and the named brands. The offered article is original, brand‑new merchandise from the manufacturer.
SDMT06T204-D57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of a proven Tiger‑tec Silver coating, the WKP25S cutting grade and a compact square 90° format for consistent milling performance; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SDMT06T204-D57 WKP25S milling indexable insert by Walter Tools — for steel and cast iron A high-performance milling indexable insert designed for productive machining of steel (P) and cast iron (K) in industrial milling operations. Tiger‑tec Silver coating for long tool life Grade WKP25S tuned for steel and cast iron Square 90° form with 0.4 mm corner radius Chipbreaker D57 for stable chip control Consistent wear resistance for longer production runs The series’ Tiger‑tec Silver coating combined with the WKP25S grade delivers a balanced resistance to abrasive wear and thermal loads typical when machining steel and cast iron. The coated carbide composition is engineered to maintain a stable cutting edge over extended cycles, reducing the need for frequent index changes and supporting predictable tool-life planning. For production environments where process repeatability matters, the coated grade provides a measurable improvement in uptime and less variation in component quality. Geometry that improves chip formation and surface quality The insert’s square 90° outline and integrated chipbreaker D57 produce controlled chip segmentation and evacuation, which reduces recutting and minimises thermal buildup at the cutting zone. A 15° clearance angle and 0.4 mm corner radius ensure a compromise between edge strength and fine surface finish: the corner radius contributes to robust performance in interrupted or heavy cut milling, while the clearance angle reduces rubbing and heat generation. These features translate into fewer tool-related interruptions and a more consistent surface quality on the machined part. Compact format and tolerance control for flexible toolset integration Presented in the SDMT06T204-D57 format with T2 thickness and tolerance class M, the insert integrates easily into standard cutter bodies designed for square‑edged indexable plates. The small plate size supports fine step-over adjustments and economical use in multi‑pass strategies, enabling efficient material removal rates without excessive strain on the toolholder. Where tooling compatibility and predictable clamping behaviour are required, this format offers a reliable solution for medium to high‑volume milling operations. Clear application focus and process benefits Developed primarily for catalogued uses in P (steel) and K (cast iron) material groups, the cutting geometry and grade selection aim to maximise process security and repeatable performance. The combination of coating technology and tailored chipbreaker reduces the incidence of edge chipping and abrasive wear when compared with uncoated grades, supporting a better cost per part ratio in many machining cycles. For planners and process engineers seeking measurable gains in throughput and stable component tolerances, this insert provides a straightforward route to improved productivity. For detailed application guidance on the Walter Tools SDMT06T204-D57 WKP25S insert or to discuss stocking and delivery, contact Metav Werkzeuge for technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMT06T204-D57-WKP25S-WALTER Designation: SDMT06T204-D57 WKP25S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Format: Square 90° Clearance angle: 15° Corner radius: 0.4 mm Chipbreaker: D57 Thickness: T2 Tolerance class: M Material application: P / K Facts Corner radius: 0.4 mm Clearance angle: 15° Plate size: 06 Thickness designation: T2 Tolerance: M Special features Coating: Tiger‑tec Silver Cutting material: coated carbide (WKP25S) Primary applications: steel and cast iron Plate form: square 90° Execution: T FAQ What materials is this insert suited for? The SDMT06T204-D57 WKP25S insert is formulated for machining steel (P) and cast iron (K), reflecting the material groups indicated for the WKP25S grade. What does the D57 chipbreaker provide? Chipbreaker D57 on this insert improves chip control and evacuation, promoting stable cutting and reducing the risk of recutting during interrupted or continuous milling operations. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, supporting longer edge life and more predictable tool performance across extended production runs. Can the square 90° form be used for shoulder milling? Yes, the square geometry with a 0.4 mm corner radius offers the rigidity and edge strength required for shoulder and face milling where a defined corner is needed. Is the insert compatible with standard cutter bodies for SDMT inserts? The SDMT06T204-D57 format with T2 thickness and tolerance class M is compatible with holders designed for SDMT-style square indexable plates; compatibility should be verified against the specific toolholder catalogue. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools is a brand of the Walter AG group, a leading producer of precision cutting tools for metalworking and part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. The mentioned brand is referenced for explanation only and does not imply any affiliation with the seller.
SDMT06T204-D57 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance and the D57 chipbreaker for consistent chip formation and extended tool life; order this insert via Metav Werkzeuge or contact our consultants for tailored machining advice. SDMT06T204-D57 WKP35G — Tiger‑tec Gold milling indexable insert (15° clearance) by Walter Tools The SDMT06T204-D57 WKP35G is a square 90° milling indexable insert designed for productive machining of steel and cast iron, combining a robust coated carbide grade with a geometry optimised for reliable chip control. Tiger‑tec Gold coated carbide grade WKP35G Optimised D57 chipbreaker for controlled chips 15° clearance, square 90° form for stability Suitable for steel and cast iron applications High-performance grade for longer cutting cycles The insert’s Tiger‑tec Gold coating and the WKP35G carbide composition deliver a balance of abrasion resistance and edge toughness that supports longer tool life and predictable performance. This coating technology reduces flank wear under typical steel and cast iron conditions, which translates into fewer tool changes and improved machine uptime. The combination of a wear‑resistant grade and an engineered microgeometry keeps cutting forces stable, enabling consistent part quality across production runs. Geometry engineered for process stability and precision The square 90° form together with 15° clearance and the corner radius 0.4 mm provide mechanical rigidity and precise cutting engagement. The insert’s form minimises vibration in interrupted cuts and enhances dimensional repeatability, especially in applications requiring firm shoulder milling or heavy engagement. The tolerance class M ensures conformity to expected seat and clamping fits, supporting reproducible results when used with standard toolholders. Optimised chip control for safer, faster machining The dedicated D57 chipbreaker is configured to produce short, manageable chips for both steel and cast iron machining, reducing the risk of tangling and improving evacuation. Controlled chip formation helps maintain surface finish and reduces thermal stress on the cutting edge, which in turn supports higher productivity and lower scrap rates. The insert’s size 06 and T2 thickness offer a practical balance between edge strength and accessibility in common pocketing and slotting operations. Application scope and compatibility in workshop workflows Designed for ISO material groups P and K, the insert is suitable where steels and cast irons are the primary workpiece materials. The designation SDMT06T204-D57 WKP35G indicates the insert geometry, chipbreaker and cutting grade, simplifying tool selection for programmed operations. Its compatibility with standard clamping systems makes replacement straightforward and supports rapid tool set‑up, helping maintain short cycle times and steady production flow. For application advice or to obtain the SDMT06T204-D57 WKP35G insert from Walter Tools, contact Metav Werkzeuge for specific machining recommendations and availability Technical details SKU: SDMT06T204-D57-WKP35G-WALTER Article designation: SDMT06T204-D57 WKP35G Type: Milling indexable insert (milling insert) Brand: Walter Tools Series: Tiger‑tec Gold Numbers / Core technical data Clearance angle: 15° Corner radius: 0.4 mm Plate form: Square 90° Size: 06 Thickness: T2 Tolerance class: M Designs / Special features Coating / grade: WKP35G (Tiger‑tec Gold) Chipbreaker: D57 Applicable materials: Steel (P), Cast iron (K) Execution: T (type designation) FAQ What materials is this insert suitable for? The SDMT06T204-D57 WKP35G insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron with optimised chip control. Which chipbreaker does the insert use and what is the benefit? This insert features the D57 chipbreaker, which produces short, controllable chips to improve evacuation and reduce rework in both steel and cast iron operations. How does the Tiger‑tec Gold grade affect tool life? The Tiger‑tec Gold coating of the WKP35G grade increases wear resistance under typical steel and cast iron conditions, supporting longer cutting cycles and more consistent results with this milling insert. Is the insert compatible with standard toolholders? Yes; the SDMT06T204-D57 WKP35G is designed to fit common clamping systems used for square 90° inserts and conforms to tolerance class M for consistent seating. Manufacturer: Walter Tools; part of Walter AG, Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no business relationship implied. The offered article is original, factory‑new merchandise of the manufacturer.
SDMT06T204-D57 WPP35G WPP35G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coating and a finely tuned D57 chipbreaker delivers extended tool life and consistent chip control for steel machining; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-parameter recommendations. SDMT06T204-D57 WPP35G – Milling insert (Tiger‑tec Gold, for steel) by Walter Tools SDMT06T204-D57 WPP35G is a square milling insert designed for high-productivity steel machining, featuring a coated‑carbide grade and a 0.4 mm corner radius. Tiger‑tec Gold coating for long tool life Optimised D57 chipbreaker for stable chips 0.4 mm corner radius for accurate profiles 15° clearance angle for safe cutting engagement Increased productivity through advanced coating technology The Tiger‑tec Gold coating on this grade provides a combination of wear resistance and thermal stability that raises process reliability in everyday production. The WPP35G grade is a coated carbide developed to cope with the typical heat and chip formation encountered when machining steels, which means longer tool life and fewer insert changes. For CNC milling operations this translates into higher machine uptime and a better overall cost-per-part ratio, because the cutting edge resists abrasive and adhesive wear under medium to heavy cutting conditions. Predictable chip control for uninterrupted production A precisely engineered D57 chipbreaker stabilises chip form across a range of cutting conditions, reducing the risk of built-up edge and erratic chips in slotting or shoulder milling. Stable chips protect the tool and workpiece surface, and they simplify chip evacuation in automated setups. The controlled chip behaviour supported by this insert helps to maintain constant cutting forces and reduces the likelihood of unplanned stops, thereby supporting a smoother production flow and consistent component quality. Precision and surface quality with small corner radius The 0.4 mm corner radius offers a reliable compromise between robust cutting edge strength and the ability to produce defined contours and fillets. Small radii are particularly useful where tight profile accuracy or fine edge definition is required, and they contribute to good surface finish when combined with stable cutting parameters. The insert’s square 90° shape enables straightforward indexation, giving four usable edges and predictable repeatability in serial production environments. Application guidance and process optimisation for steel Designed primarily for steel machining, the insert is suitable for unalloyed and alloyed steels where thermal load and chip formation demand a robust grade. The 15° clearance angle reduces rubbing and helps to control tool–workpiece interaction, while the plate thickness and geometry provide mechanical stability in interrupted cuts. For best results, pair this insert with appropriate milling cutters and follow manufacturer-recommended speeds and feeds; modest increments in feed per tooth can improve chipbreaking and surface finish without sacrificing edge life. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Gold inserts like the SDMT06T204-D57 WPP35G and receive tailored recommendations for cutter selection and cutting data — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: SDMT06T204-D57-WPP35G-WALTER Designation: SDMT06T204-D57 Grade: WPP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 06 Thickness: T2 Tolerance class: M Special features Coating technology: Tiger‑tec Gold (coated carbide) Chipbreaker: D57 Material suitability: Steel (P) Execution: T FAQ What materials is this insert best suited for? The SDMT06T204-D57 WPP35G insert is optimised for machining steel (P) and the WPP35G grade accommodates the heat and chip characteristics typical of such materials. How does the D57 chipbreaker affect machining? The D57 chipbreaker on the SDMT06T204-D57 design ensures controlled chip formation, reducing built-up edge and improving chip evacuation for steadier cutting forces. How many cutting edges are available per insert? As a square 90° insert, the SDMT06T204-D57 provides four usable cutting edges, enabling economical indexing and predictable repeatability in production. Which feature primarily extends tool life in this grade? The Tiger‑tec Gold coating of the WPP35G grade gives enhanced wear resistance and thermal stability, which together extend the service life of the insert under typical steel‑machining conditions. Is the insert suitable for interrupted cuts and shoulder milling? Yes; the plate geometry, thickness and the 15° clearance angle provide mechanical stability suitable for interrupted cuts and shoulder milling in steel. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
SDMT06T204-D57 WSM35G WSM35G Wendeplatten - Walter Tools
A high-performance insert for demanding milling tasks: the Tiger·tec Gold grade combines a heat-resistant coating and a stabilised chipformer for secure chip control and extended edge life. With a 15° relief and a 0.4 mm corner radius, the insert delivers repeatable surface quality when machining rostfreien Stahl and heat-resistant superalloys. Order directly via Metav Werkzeuge or consult their technical team for application-specific recommendations. SDMT06T204-D57 WSM35G milling indexable insert (0.4 mm corner, 15° relief) – Walter Tools SDMT06T204-D57 WSM35G is a square milling indexable insert designed for heavy-duty and heat-prone materials, providing stable cutting performance in interrupted and continuous operations. Tiger·tec Gold coating for high wear resistance Optimised chipformer D57 for secure chip control Suited for rostfreien Stahl and superalloys 0.4 mm corner radius for consistent edge integrity Consistent process outcomes for difficult materials The Tiger·tec Gold grade delivers a combination of heat resistance and controlled wear that reduces unplanned downtime when machining rostfreien Stahl and high-temperature alloys. The coated carbide composition supports stable edge life and reduces the tendency for built-up edge, which in turn improves surface finish and dimensional repeatability. Engineers benefit from predictable tool behaviour: the geometry and coating together lower the frequency of insert changes, contributing to higher machine utilisation and fewer quality rejects. Coating and grade explained for reliable productivity The WSM35G grade represents a coated carbide developed for heat‑resistant environments, emphasising thermal stability and edge integrity. The Tiger·tec Gold technology applies a robust multilayer barrier that slows flank wear and protects the carbide substrate under elevated cutting temperatures. For production planning, this means longer tool cycles and fewer interruptions for tool change, particularly where material heat conduction is poor. For users less familiar with coatings: think of it as an insulating, wear‑resistant surface that helps maintain the cutting edge during prolonged engagement. Geometry and chip control that simplify machining The insert’s chipformer D57 and Square 90° shape are tuned to produce short, controllable chips even when cutting sticky or tough alloys, improving evacuation and reducing re-cutting. The 15° relief angle reduces rubbing at the flank and helps maintain cutting efficiency, while the 0.4 mm corner radius balances strength and finish capability for general face and shoulder milling. The insert’s size and T2 thickness ensure compatibility with a wide range of standard milling cutter bodies, making it straightforward to integrate into existing tooling systems without complex setup changes. For precise application advice on Walter Tools Tiger·tec Gold inserts and to secure fast delivery, contact Metav Werkzeuge for tailored recommendations and order support Technical data Article number: SDMT06T204-D57-WSM35G-WALTER Designation: SDMT06T204-D57 WSM35G Manufacturer: Walter Tools Core data Relief angle: 15° Corner radius: 0.4 mm Insert size: 06 Thickness: T2 Shape: Square 90° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipformer: D57 Material application: rostfreien Stahl, superalloys and titanium Series: Tiger-tec Gold FAQ What materials is this insert intended for? The SDMT06T204-D57 WSM35G insert from Walter Tools is specified for rostfreien Stahl and heat‑resistant superalloys, with good performance also on titanium depending on cutting data. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the SDMT06T204-D57 WSM35G improves thermal resistance and wear behaviour, which extends edge life and supports more consistent component quality. Which chipformer is integrated and why does it matter? The insert uses a D57 chipformer; this feature shapes chips for safe evacuation and reduces the likelihood of re-cutting, helping to protect the machined surface and tool life. Is the insert compatible with standard square milling cutters? Yes, the Square 90° form and the T2 thickness make the insert compatible with standard cutter bodies designed for SDMT‑style square inserts; check the cutter clamping for SDMT06 interface. What does the tolerance class M indicate for workshop use? Tolerance class M signifies machineable precision suitable for production use where consistent insert seating and dimensional repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SDMT06T204-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a 0.4 mm corner radius and versatile material coverage for reliable, productive milling. Order the inserts via Metav Werkzeuge or contact our technical advisers for application-specific recommendations. SDMT06T204-D57 WSP45G indexable milling insert — Tiger‑tec Gold PVD, for steel, stainless steel and superalloys — Walter Tools A SDMT06T204-D57 WSP45G indexable milling insert engineered for versatile milling tasks across steel, stainless steel and heat‑resistant alloys, offering stable chip control and extended tool life. Tiger‑tec Gold PVD‑coated carbide Suitable for steel, stainless steel, titanium Square 90° geometry for heavy milling 0.4 mm corner radius with 15° relief angle Proven coating technology for longer tool life The Tiger‑tec Gold coating is a PVD‑coated carbide technology developed for applications that demand a balance of wear resistance and edge stability. On this insert, the coating reduces flank wear and improves resistance to thermal load during interrupted cuts. For production environments, that translates into fewer indexings and more uptime: the coating supports consistent performance in serial milling and improves reliability where repeatable surface quality is required. The description of the coating underlines why this insert is chosen where predictable tool life is a priority. Reliable performance across demanding materials Designed for the ISO groups P, M and S, the insert supports machining of unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys/titanium. The substrate and grade combination of WSP45G targets the typical challenges of these materials — high temperatures, tendency to build up on the cutting edge and hard microstructures. The result is stable chip formation and a reduced risk of built‑up edge, which is particularly beneficial when switching between roughing and semi‑finishing tasks on mixed material batches. Geometry engineered for strength and precision The Square 90° form with a 0.4 mm corner radius provides a robust cutting edge for heavier engagement while still allowing controlled material removal in semi‑finishing. The 15° relief angle helps to reduce cutting forces and supports smooth entry into the cut, improving dimensional stability on interrupted or heavy passes. This balance of edge strength and geometrical control makes the insert suitable for slotting and face milling operations where both tool life and surface integrity matter. Practical workshop advantages and application guidance Using this indexable insert contributes to predictable process windows and reduced set‑up variation. The integrated D57 chipbreaker geometry promotes manageable chip shapes for a wide range of feeds and depths, helping to keep workholding and machine tool windows clear. For tailored application parameters or recommendations on feeds, speeds and clamping strategy, Metav Werkzeuge’s technical advisers can provide machining data and optimisation tips specific to the workpiece material and machine capability. If uncertain about selection, further technical data can be supplied to match the cutting strategy to production goals. For application advice or to source SDMT06T204-D57 WSP45G inserts from Metav Werkzeuge, contact our technical advisers at info@metav-werkzeuge.com or call +49 2822 7131930 for a recommendation tailored to the machining task Technical data SKU: SDMT06T204-D57-WSP45G-WALTER Article name: Fräswendeschneidplatte SDMT06T204-D57 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 0.4 mm Relief/clearance angle: 15° Insert size designation: 06 Thickness designation: T2 Geometry: Square 90° Special features Grade: WSP45G Coating technology: Tiger‑tec Gold (PVD) Substrate: PVD‑coated carbide Chipbreaker: D57 Tolerance class: M Material applications: P (steel), M (stainless steel), S (superalloys/titanium) FAQ What materials is this insert suitable for? The SDMT06T204‑D57 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold PVD coating improves wear resistance and thermal stability of the insert, promoting longer tool life and more consistent surface finish in demanding milling operations. What cutting geometry benefits does the square form provide? The Square 90° geometry delivers a strong cutting edge ideal for heavier milling passes and interrupted cutting, while the 0.4 mm corner radius balances durability with the ability to achieve good surface integrity. When is the 0.4 mm corner radius recommended? A 0.4 mm corner radius is a compromise between robustness and finish: it is recommended for mixed roughing and semi‑finishing where edge strength is needed without substantially compromising surface quality. Can this insert handle interrupted cuts and higher temperatures? Yes — the combination of the WSP45G grade and Tiger‑tec Gold coating is designed to cope with thermal load and the mechanical demands of interrupted cuts common in milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are used here for explanatory purposes only and do not indicate any affiliation between our company and the trademark owners.
SDMT06T204-F57 WAK15 Wendeplatten - Walter Tools
Take advantage of a sharp, aluminium-optimised carbide grade and precise 0.4 mm corner radius for consistent surface finish and reliable chip evacuation; order the insert via Metav Werkzeuge or request application advice from our consultants. SDMT06T204-F57 WAK15 — milling indexable insert, 15° relief (Walter Tools) SDMT06T204-F57 WAK15 is a square 90° milling insert engineered for aluminium and other non‑ferrous metals, combining a 15° clearance angle with a fine 0.4 mm corner radius for accurate, burr‑reduced machining Square 90° insert geometry Uncoated carbide grade WAK15 Optimised for aluminium and non‑ferrous metals Chipbreaker F57 for controlled chips Precision and material compatibility for non‑ferrous work The insert is based on the WAK15 uncoated carbide grade within the Walter N‑series, developed specifically for aluminium and other non‑ferrous materials (ISO 513 group N). The combination of a sharp cutting edge and a smooth rake geometry reduces material adhesion and burr formation, which translates into fewer secondary operations and improved cycle times. For shops transitioning from brazed tools to indexable systems, the insert offers predictable edge behaviour and easier tool management. Controlled chip formation and improved surface quality Equipped with chipbreaker F57 and a small 0.4 mm corner radius, this square insert produces short, manageable chips and helps maintain a consistent cutting edge engagement. The 15° relief reduces rubbing on non‑ferrous alloys and supports higher feed rates without compromising surface finish. For those less familiar with insert geometry: the chipbreaker shapes the way material breaks off during cutting, and the corner radius influences both strength and finish — a fine radius favours a cleaner edge on soft metals. Robust process performance and economical machining As an uncoated carbide solution, this insert prioritises sharpness and low built‑up edge for soft alloys; it avoids coatings that might increase friction in certain non‑ferrous applications. The square 90° form provides four usable cutting edges per indexable plate, increasing tool utilisation and reducing tooling costs per part. The tolerance class M and Walter’s series design ensure repeatable seating and consistent runout behaviour in standard clamp systems, supporting steady production runs. Integration into workshop operations The insert’s designation and form factor make it straightforward to index and replace within common milling cutters that accept SDMT‑style plates. The modest geometry demands standard machine power and cooling strategies; many workshops will notice immediate improvements in finish and reduced rework when switching to a carbide insert tailored for non‑ferrous metals. Technical teams benefit from predictable tool life and straightforward stock keeping thanks to the clear series and grade labelling. For application advice or to secure stock of the Walter Tools SDMT06T204‑F57 WAK15 insert, contact Metav Werkzeuge for tailored recommendations and supply options Technical Data Article number: SDMT06T204-F57-WAK15-WALTER Designation: SDMT06T204-F57 WAK15 Product type: milling indexable insert Brand: Walter Tools Series: Walter N‑series Grade: WAK15 Data Relief/clearance angle: 15° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 06 Plate thickness: T2 Tolerance class: M Special features Uncoated carbide grade WAK15 Chipbreaker: F57 Suitable for aluminium and non‑ferrous metals (ISO 513 group N) Square geometry for four indexable edges Series: Walter N‑Sortensystem FAQ What materials is this insert intended for? The SDMT06T204‑F57 WAK15 insert is optimised for aluminium and other non‑ferrous metals (ISO 513 group N) and performs best where sharp edges and low adhesion are required. Does the insert come with a coating? No; the WAK15 grade is an uncoated carbide designed for high sharpness and reduced built‑up edge in soft alloys. How does the chipbreaker affect machining? The F57 chipbreaker controls chip shape and evacuation, improving process stability and reducing the risk of chip entanglement during milling with the Walter Tools insert. How many cutting edges are usable per plate? The square 90° geometry provides four indexable edges per plate, offering efficient utilisation and economical tool management. Which series and tolerance class apply to this insert? It belongs to the Walter N‑Sortensystem and is manufactured to tolerance class M for consistent seating and repeatable performance. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT06T204-F57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the WKP25S grade with Tiger‑tec Silver coated carbide and a 15° relief angle to ensure reliable performance when machining Stahl and cast iron; order the SDMT06T204‑F57 WKP25S milling insert directly via Metav Werkzeuge or consult the technical advisors if required. SDMT06T204‑F57 WKP25S milling insert (Tiger‑tec Silver) by Walter Tools — for Stahl and cast iron, 15° relief The SDMT06T204‑F57 WKP25S milling insert is a Tiger‑tec Silver coated, square 90° indexable plate developed for productive face and shoulder milling in Stahl and cast iron applications. Tiger‑tec Silver coated carbide grade WKP25S Optimised for Stahl and cast iron machining 15° relief angle with 0.4 mm corner radius Square insert 90° for versatile face milling Consistent machining results through a modern coated grade The Tiger‑tec Silver coating together with the WKP25S grade offers a balanced combination of wear resistance and toughness. This coated carbide formulation is engineered to control thermal loads and abrasive wear during continuous cutting, which translates into longer tool life and fewer index changes on the machine. For production environments requiring repeatable surface quality, the coated grade reduces process variation and helps to maintain component tolerances over longer batches. Geometry and chip control that simplify set‑up and boost productivity The square 90° plate geometry with a 15° relief and a 0.4 mm corner radius provides a robust edge for face and shoulder milling while enabling predictable engagement with the workpiece. The integrated chipbreaker F57 is designed to support short, controllable chip formation in cast iron and compact chips in Stahl, improving evacuation and reducing the risk of re-cutting. These geometric choices shorten set‑up times and lower the incidence of machining interruptions, improving overall line throughput. Robust tolerance and series features for industrial use Manufactured to tolerance class M and delivered in the T2 thickness variant, this insert supports stable clamping and repeatable indexing in automated toolholders. Being part of the Tiger‑tec Silver series and specified for materials P (Stahl) and K (cast iron), the insert is positioned for shops that prioritise process security and uptime. Walter Tools' design focus on a stable cutting edge and broad material coverage makes this plate suitable for mixed‑production workshops where flexibility and reliable tool life are essential. For application advice on the Tiger‑tec Silver WKP25S grade, to confirm suitability for a specific Stahl grade or cast iron type, or to procure original Walter Tools SDMT06T204‑F57 WKP25S inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMT06T204-F57-WKP25S-WALTER Designation: SDMT06T204-F57 WKP25S Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 06 Plate thickness: T2 Shape: Square 90° Tolerance class: M Special features Series/coating: Tiger‑tec Silver Grade: WKP25S (coated carbide) Suitable materials: P (Stahl), K (cast iron) Chipbreaker: F57 Execution: T WPL ISO designation: SDMT06T204-F57 WKP25S FAQ Which materials can be machined with this insert? The SDMT06T204‑F57 WKP25S milling insert is specified for machining P (Stahl) and K (cast iron), making it suitable for a wide range of unalloyed and alloyed Stahl grades and typical cast‑iron components. What advantages does the Tiger‑tec Silver coating offer? Tiger‑tec Silver on the WKP25S grade improves wear resistance under thermal load and helps maintain a stable cutting edge, extending the effective life of the insert in continuous milling operations. How does the F57 chipbreaker affect machining performance? The F57 chipbreaker promotes short, controlled chips in cast iron and aids chip management in Stahl, reducing risk of chip entanglement and improving surface finish consistency when using the SDMT06T204‑F57 WKP25S. Is the insert suitable for high‑speed machining? The combination of coated carbide and its geometry provides good thermal stability; suitability for high‑speed conditions depends on the specific machine, spindle capability and the Stahl or cast‑iron grade being machined. What does the 0.4 mm corner radius mean for component finish? A 0.4 mm corner radius offers a compromise between edge strength and achievable corner definition, supporting robust cutting while maintaining acceptable surface quality in typical face‑milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade designations are the property of their respective owners. Brand names and registered trademarks are used only for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
SDMT06T204-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of long edge life, reliable chip control and precise geometry for consistent milling in steel applications; order directly via Metav Werkzeuge or consult our specialists for process parameters. SDMT06T204-F57 WPP35G milling indexable insert — Tiger·tec Gold, for steel (Walter Tools) SDMT06T204-F57 WPP35G is a square 90° milling indexable insert engineered for productive steel machining with Walter Tools' Tiger·tec Gold coating. Tiger·tec Gold for extended tool life Suitable for steel (ISO P) machining Square 90° geometry with 0.4 mm radius Chipbreaker F57 for controlled chip formation Maximised productivity through advanced grade and coating The SDMT06T204-F57 WPP35G is based on Walter Tools' Tiger·tec Gold technology and the WPP35G grade, a coated carbide designed specifically for steel machining. This combination promotes a stable cutting edge and predictable wear behaviour, which translates into fewer insert changes and longer uninterrupted production runs. The grade balances wear resistance and toughness, making it suitable for the varied demands of general and semi-finishing steel operations. Explaining the term: a coated carbide comprises a carbide substrate with engineered surface layers that reduce friction and improve thermal resistance, so the tool endures higher cutting temperatures while maintaining edge geometry. Safer, cleaner machining with optimised chip control The integrated chipbreaker F57 offers consistent chip control, which reduces vibration and the risk of entanglement in milling. Improved chip formation lowers heat concentration at the cutting edge and supports a better workpiece surface quality with fewer rework cycles. For operations where consistent chip evacuation is critical — such as slotting or shoulder milling — the tailored chip geometry assists process stability and can allow higher material removal rates without sacrificing finish. Geometry that supports versatile milling strategies The insert's square 90° configuration with a 0.4 mm radius and 15° clearance is optimised for flexible milling tasks, from shoulder cuts to light ramping. The corner radius influences both strength and surface finish: a 0.4 mm radius provides enhanced edge robustness for intermittent cuts while still enabling a good surface texture. The 90° positioning gives straightforward toolpath planning for facing and shoulder operations, increasing compatibility across common milling strategies in job shops and production lines. Consistent integration and repeatable results on the shop floor Tolerance class M together with T2 thickness ensures repeatable seating and secure clamping in standard toolholders, aiding process reproducibility. Being specified for steel (ISO group P) the insert supports reliable performance in unalloyed and alloyed steels where typical heat and chip characteristics occur. The combination of grade, geometry and designated chipbreaker contributes to productive machining with less setup variation and predictable tool life, helping to reduce downtime and increase process efficiency. For application-specific recommendations on using Walter Tools Tiger·tec Gold inserts in steel machining, contact Metav Werkzeuge for technical guidance or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SDMT06T204-F57-WPP35G-WALTER Label: Fräswendeschneidplatte SDMT06T204-F57 WPP35G Walter Tools Product type: milling indexable insert Manufacturer: Walter Tools Grade: WPP35G Series: Tiger·tec Gold Material group: P (steel) ISO designation: SDMT06T204-F57 WPP35G UID: SDMT06T204-F57-WPP35G-WALTER Facts Free angle: 15° Corner radius: 0.4 mm Insert shape: Square 90° Insert size: 06 Chipbreaker: F57 Thickness designation: T2 Tolerance class: M Execution: T Special features Coated carbide, Tiger·tec Gold technology Designed for steel machining (ISO P) Optimised chip control with F57 chipbreaker Balanced wear resistance and toughness for general steel work Stable cutting edge for productive milling FAQ What materials is this insert suitable for? The SDMT06T204-F57 WPP35G milling indexable insert is specified for the ISO P group, i.e. unalloyed and alloyed steel applications, where its coating and grade deliver effective wear and heat resistance. How does the chipbreaker F57 improve machining? The F57 chipbreaker shapes and breaks chips to support consistent chip control, reducing re-cutting of chips and improving surface finish and process stability when using the SDMT06T204-F57 WPP35G. Is the insert geometry suitable for shoulder milling and finishing? Yes, the 90° square geometry and 0.4 mm radius make the insert versatile for shoulder milling and light finishing operations, providing a compromise between edge strength and achievable surface quality. Can this insert be used in high-speed machining? The WPP35G grade within the Tiger·tec Gold series is designed for productive steel machining; suitability for specific high-speed parameters should be verified against machine and process conditions, using the SDMT06T204-F57 WPP35G recommendations and cutter system limits. Is stainless steel listed among the applicable materials? No application for stainless steel is specified for the SDMT06T204-F57 WPP35G in the provided data; the insert is designated for the ISO P (steel) group. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
SDMT06T204-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WSM35G carbide grade optimised for stainless steel and heat‑resistant alloys, and precise geometry for consistent chip control and longer tool life. Order the insert via Metav Werkzeuge or contact the technical team for application advice. SDMT06T204-F57 WSM35G milling indexable insert (Square 90°, 15° rake) – Walter Tools SDMT06T204-F57 WSM35G is a square milling indexable insert engineered for heavy cutting and the reliable machining of stainless steel and heat‑resistant superalloys, delivering stable chip formation and extended edge life. Tiger·tec Gold coating for enhanced edge stability Optimised for stainless steel and superalloys Square 90° form with 0.4 mm corner radius 15° rake angle for reliable chip control Consistent cutting performance for difficult materials The insert combines a coated cemented carbide grade with a specifically tuned chipbreaker F57, producing a controlled chip flow even under demanding conditions. This configuration reduces the risk of built‑up edge when working with stainless steel, where toughness and heat generation challenge conventional tools. The robust coating and tailored grade enable a steady metal‑removal rate and contribute to fewer unplanned tool changes, which improves uptime and process reliability on series production and single‑part manufacturing alike. Measurable productivity and surface quality gains Thanks to the WSM35G grade within the Tiger·tec Gold family, thermal stability and improved wear resistance are prioritised. That leads to more consistent tool performance across longer cycles, supporting predictable surface finishes and repeatable part tolerances. For workshops aiming to reduce tooling interventions, the economic benefit is tangible: fewer indexings and reduced downtime. The ISO group suitability for M and S materials means the insert is a versatile choice where stainless steel and heat‑resistant alloys are encountered, combining cutting‑edge metallurgy with process security. Practical geometry for straightforward integration The square 90° form and 0.4 mm corner radius deliver a durable cutting edge suitable for shoulder and slot milling, while the 15° rake angle assists chip breaking and evacuation when paired with the F57 geometry. The plate thickness T2 and size 06 give a stable seat in standard toolholders, and the insert’s design supports a consistent contact zone for reliable clamping. For production environments seeking easy tool changeover and predictable tool life, the geometry supports both high‑load roughing and semi‑finishing operations without complex setup changes. Discuss application needs with Metav Werkzeuge to match the SDMT06T204-F57 WSM35G insert to machine parameters and workpiece materials; Metav Werkzeuge’s technical advisors are available for material‑specific cutting data and toolholder recommendations. Technical Data Article number: SDMT06T204-F57-WSM35G-WALTER Designation: SDMT06T204-F57 ISO designation: SDMT06T204-F57 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: F57 Plate form: Square 90° Plate size: 06 Plate thickness: T2 Corner radius: 0.4 mm Free angle: 15° Tolerance class: M Applicable material groups: S / M Facts Corner radius: 0.4 mm Free angle: 15° Size: 06 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Gold technology Grade type: coated cemented carbide Chip control: F57 geometry Material suitability: stainless steel (ISO M), heat‑resistant superalloys and titanium (ISO S) Typical use: heavy machining and stainless‑steel applications FAQ What materials is this insert best suited for? The SDMT06T204-F57 WSM35G insert is formulated for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering secure chip formation and edge stability in these demanding materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold increases thermal resistance and reduces flank wear, so the WSM35G grade maintains cutting edge integrity for longer periods and supports more stable machining cycles. Which machining operations benefit most from this geometry? Square 90° inserts with a 0.4 mm corner radius and 15° rake are particularly effective for shoulder milling, slotting and medium‑to‑heavy roughing where robust edges and reliable chip control are required. Is the chipbreaker F57 suitable for high feed rates? The F57 geometry is designed to produce short, controllable chips under heavy cutting conditions, making it compatible with increased material removal rates when cutting parameters are set appropriately. Can this insert be used in standard toolholders? The plate size 06 and T2 thickness follow common indexable insert dimensions, allowing use in compatible toolholders; Metav Werkzeuge can advise on exact holder matching for specific machines. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names belong to their respective owners. Mark names and protected designations are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
SDMT06T204-F57 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the proven combination of the WSM45X coated carbide grade and the F57 chipbreaker for stable chip control in tough materials; the 15° relief angle and 0.4 mm corner radius support consistent cutting performance. Order the SDMT06T204-F57 WSM45X directly via Metav Werkzeuge or ask the consultants for advice. SDMT06T204-F57 WSM45X — Milling insert, coated carbide for stainless steels, Walter Tools SDMT06T204-F57 WSM45X is a compact square insert optimised for machining stainless steels and heat‑resistant superalloys in demanding milling applications Coated carbide grade WSM45X for tough materials Optimised F57 chipbreaker for stable chip control 15° relief angle for secure cutting mechanics Square 90° form with 0.4 mm corner radius Consistent machining of stainless steels and superalloys The WSM45X grade is a coated carbide developed for applications where material toughness and heat generation are critical. Classified for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), the grade promotes secure chip formation and helps prevent built‑up edge under elevated temperatures. This results in more reproducible tool life and reduced rework, which supports higher process reliability and predictable production cycles. Geometry that delivers repeatable surface quality and tool life The insert’s square 90° form, combined with a 0.4 mm corner radius, provides a balance between edge strength and achievable surface finish. The F57 chipbreaker ensures controlled chips across a range of feeds, reducing the risk of clogging and stabilising cutting forces. With a 15° relief angle the insert offers secure engagement in face and shoulder milling, helping to maintain a stable cutting edge and minimise vibration during interrupted cuts. Operational benefits and typical applications Designed for tough milling tasks, the insert suits roughing and semi‑finishing on stainless steels and heat‑resistant alloys where thermal loads and material ductility challenge standard grades. The combination of grade, chipbreaker and geometry reduces indexings and extends productive cutter life, supporting lower per‑part costs and fewer tool changes. Compatibility with standard indexable holders makes integration into existing tool systems straightforward, improving machine uptime and process security. For process support and availability of SDMT06T204-F57 WSM45X inserts, contact Metav Werkzeuge to determine the ideal holder and stock status — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMT06T204-F57-WSM45X-WALTER Article designation: SDMT06T204-F57 Product type: Milling insert Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 0.4 mm Insert size: 06 Thickness: T2 Plate form: Square 90° Special features Grade: WSM45X (coated carbide) Chipbreaker: F57 Material suitability: stainless steels (ISO M), heat‑resistant superalloys and titanium (ISO S) Typical application: machining tough, difficult‑to‑cut materials Design: indexable square insert for milling operations FAQ Which materials can be machined with this insert? The SDMT06T204-F57 WSM45X insert is specified for ISO M (stainless steels) and ISO S (heat‑resistant superalloys and titanium), making it suitable for demanding alloys and applications with high thermal loads. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius increases edge strength compared with a smaller radius, improving resistance to chipping while still enabling a good surface finish in semi‑finishing operations with the SDMT06T204-F57 WSM45X. What benefits does the F57 chipbreaker provide? The F57 chipbreaker promotes consistent chip formation and evacuation, which stabilises cutting forces and reduces the risk of built‑up edge when machining ductile materials. Is this grade coated and why is that important? Yes, the WSM45X is a coated carbide grade; the coating improves wear resistance and thermal stability, extending the effective cutting life under elevated temperatures common in stainless steel machining. Which operations are typical for this insert? The insert is intended for face and shoulder milling, roughing and semi‑finishing on tough, heat‑generating materials where process security and edge stability are priorities. Protected trademarks and trade names are the property of their respective owners. The mention of brand names serves explanatory purposes only and does not imply any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
SDMT06T204-F57 WSP45G Wendeplatten - Walter Tools
Combine cost-effective milling performance with a robust PVD grade and precise geometry for consistent chip control and long tool life; order the SDMT06T204-F57 WSP45G via Metav Werkzeuge or consult our specialists for application recommendations. SDMT06T204-F57 WSP45G milling indexable insert — Tiger·tec Gold PVD, 15° clearance (Walter Tools) The SDMT06T204-F57 WSP45G is a square milling indexable insert designed for versatile finishing and roughing applications across a wide range of engineering materials Tiger·tec Gold PVD-coated carbide Versatile for Steel, Stainless, Superalloys Square 90° with 0.4 mm corner radius 15° clearance, tolerance class M Higher through‑put from a tough, versatile cutting grade The combination of the Tiger·tec Gold coating and the WSP45G cutting grade provides a balance of toughness and wear resistance that supports higher machining speeds and prolonged tool life. The insert is a PVD‑coated carbide grade optimised for typical heat and chip conditions when machining steels and stainless steels, while also offering the thermal stability required for heat‑resistant alloys. This results in fewer tool changes and more stable process windows, which translates directly into increased productivity and predictable operating costs for series production. Geometry for stable edges and improved surface quality A square 90° platform with a 0.4 mm corner radius and a 15° clearance angle delivers predictable cutting forces and repeatable surface finish in both roughing and semi‑finishing passes. The F57 chipbreaker fosters controlled chip formation over a broad range of feeds, reducing the risk of built‑up edge and improving swarf evacuation in challenging materials. Tolerance class M ensures dimensional consistency between replacement inserts, supporting reliable tool set‑up and minimising scrap from variation in insert seating or cutter balance. Broad material applicability with industrial compatibility Marked for machining groups P / M / S, this insert is suitable for unalloyed and alloyed steels, rostfreier Stahl (stainless steel) and high‑temperature superalloys and titanium, offering a single‑grade solution for mixed production lots. The SDMT form factor and standard ISO designation make the insert compatible with established cutter bodies and clamping systems that accept this geometry, simplifying inventory and allowing rapid exchange during maintenance windows. The robust edge preparation of the grade improves resistance against thermal and mechanical loads, supporting repeatable performance in continuous machining environments. Contact Metav Werkzeuge today to discuss Walter Tools' Tiger·tec Gold inserts and confirm the optimal SDMT06T204-F57 WSP45G configuration for the intended application; eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: SDMT06T204-F57-WSP45G-WALTER Item designation: SDMT06T204-F57 WSP45G Label: Fräswendeschneidplatte SDMT06T204-F57 WSP45G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 06 Thickness: T2 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: F57 Execution: T Material applicability: Steel; rostfreier Stahl; heat‑resistant superalloys and titanium (P / M / S) FAQ What materials is this insert suitable for? The SDMT06T204-F57 WSP45G from Walter Tools is specified for machining steel, stainless steel and heat‑resistant superalloys/titanium (designated P / M / S), offering a versatile solution across mixed production. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold coating on the WSP45G grade improves heat resistance and reduces flank wear, which helps maintain cutting edge integrity and longer tool life under typical milling conditions. What impact does the 0.4 mm corner radius have on performance? A 0.4 mm corner radius increases edge strength compared with very small radii, permitting stable finishes at higher feeds while balancing strength and surface quality for general milling tasks. Is the insert compatible with standard SDMT toolholders? The insert uses the SDMT geometry and ISO designation, which corresponds to common square‑insert milling toolholders designed for this form factor; verification with the specific holder dimensions is recommended. What role does the F57 chipbreaker play in operations? The F57 chipbreaker promotes consistent chip formation across a range of feeds, improving evacuation and reducing the risk of built‑up edge when machining ductile and heat‑prone materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is original, new production from the manufacturer Walter Tools.
SDMT06T204-F57-WKP35G Wendeplatten - Walter Tools
Fräswendeschneidplatte SDMT06T204-F57 WKP35G von Walter Tools Die SDMT06T204-F57 WKP35G ist eine quadratische Fräswendeschneidplatte (90°) mit 15° Freiwinkel, ausgelegt für produktive Zerspanung von Stahl und Gusseisen Quadrat 90° Form für universelle Fräsaufgaben Tiger·tec Gold Beschichtung für lange Standzeit WKP35G Sorte optimiert für Stahl und Gusseisen Eckenradius 0,4 mm für stabile Schnittqualität Spanbrecher F57 für kontrollierte Spanformung Wirtschaftliche Schneidleistung durch moderne Beschichtung Die Kombination aus Tiger·tec Gold Beschichtung und beschichtetem Hartmetall sorgt für lange Standzeit und konstante Leistung in Serienprozessen. Dank der Sortenentwicklung WKP35G reduziert sich der Verschleiß bei typischen Stahl- und Gussanwendungen, was Rüst- und Werkzeugkosten senkt. Anwender in der Serienfertigung profitieren von vorhersehbaren Wechselintervallen und gleichbleibender Bauteilqualität. Geometrie und Spanverhalten für stabile Prozesse Die quadratische Plattenform 90° mit einem Freiwinkel von 15° und einem Eckenradius von 0,4 mm bietet eine gute Balance aus Stabilität und Schnittkraftverteilung. Der Spanbrecher F57 ist auf kurze, brechende Späne abgestimmt und verbessert so die Spanableitung bei Gusseisen sowie die Oberflächengüte bei Stahl. Diese Geometrie ermöglicht reproduzierbare Ergebnisse auf konventionellen und CNC-gesteuerten Fräsmaschinen. Zielgruppe, Einsatzszenarien und Servicehinweis Entwickelt für Produktionsbetriebe, Lohnfertiger und Werkzeugmechaniker, liefert die Platte konsistente Ergebnisse bei Mittel- bis Hochvolumenbearbeitung von Stahl und Gusseisen. Wer sich unsicher ist, ob die Ausführung passt, kann technische Parameter und Prozessempfehlungen bei Metav Werkzeuge erfragen; die Beratung unterstützt bei Schnittdaten, Werkzeughalterauswahl und Prozessoptimierung. So bleibt die Fertigung effizient und prozesssicher. Empfehlung: Für produktive Zerspanung mit der Tiger·tec Gold Sorte WKP35G direkte Beratung und Bestückung über Metav Werkzeuge anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: SDMT06T204-F57-WKP35G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Produktart: Fräswendeschneidplatte Fakten Freiwinkel: 15° Eckenradius: 0,4 mm Plattengröße: 06 Plattendicke: T2 Besonderheiten Sortenbezeichnung: WKP35G Spanbrecher: F57 (für kurze, brechende Späne) Ausführung: T (Plattenstärke/Typ) Plattenform: Quadrat 90° Beschichtung: Tiger·tec Gold (beschichtetes Hartmetall) Bearbeitbare Werkstoffe: P (Stahl), K (Gusseisen) Toleranzklasse: M FAQ Für welche Werkstoffe eignet sich die SDMT06T204-F57 WKP35G am besten? Die SDMT06T204-F57 WKP35G von Walter Tools ist für die Bearbeitung von Werkstoffgruppen P (Stahl) und K (Gusseisen) ausgelegt; die Sorte erlaubt kontrollierte Spanbildung und guten Verschleißwiderstand bei diesen Materialien. Welche Vorteile bringt die Tiger·tec Gold Beschichtung im Alltag? Die Tiger·tec Gold Beschichtung erhöht die Verschleißfestigkeit und Standzeit der Wendeschneidplatte, was bei der Fräswendeschneidplatte SDMT06T204-F57 WKP35G zu weniger Werkzeugwechseln und stabileren Produktionsläufen führt. Wie beeinflusst der Spanbrecher F57 die Fertigungsqualität? Der Spanbrecher F57 sorgt für kurze, brechende Späne, verbessert die Spanableitung und trägt so zu konstanter Oberflächengüte und längeren Standzeiten der SDMT06T204-F57 WKP35G bei. Ist die Platte für automatisierte Serienfertigung geeignet? Ja, die Geometrie und Beschichtung der SDMT06T204-F57 WKP35G sind für automatisierte Serienprozesse geeignet und bieten reproduzierbare Ergebnisse bei stabiler Standzeit. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Deutschland
SDMT06T208-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, Tiger·tec Gold coating and proven chip control to keep cycle times low and tool changes predictable; order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. SDMT06T208-F57 WKP35G milling indexable insert — Tiger·tec Gold, square 90°, for steel & cast iron by Walter Tools The SDMT06T208-F57 WKP35G is a square milling insert designed for robust and repeatable machining of steel and cast iron in versatile milling operations. Tiger·tec Gold coating for extended life Optimised chipbreaker F57 for stable chips Square 90° geometry with 0.8 mm radius Suitable for steel (P) and cast iron (K) Longer tool life through advanced coating and grade selection The combination of the Tiger·tec Gold coating and the WKP35G grade provides a balanced system for both abrasive and adhesive wear mechanisms encountered in machining steel and cast iron. The coating reduces adhesion and improves thermal resistance, which leads to more consistent cutting edge retention and fewer unplanned tool changes. Such material pairing is particularly beneficial when machining mixed batches or varying heat loads, as the insert resists premature wear while maintaining reliable dimensional performance. Predictable chip control and stable cutting geometry With an optimised chipbreaker F57, a square 90° form and a 0.8 mm corner radius, this insert offers controlled chip formation across a range of depths of cut and feeds. The 15° clearance angle reduces rubbing at the flank and supports clean evacuation of fragments, improving surface finish and reducing the risk of built-up edge. These geometric features translate into fewer interruptions on the shop floor and a steady process window, making the component well suited to both semi-finish and heavy roughing passes where consistent swarf behaviour matters. Repeatability and shop-floor integration for efficient workflows Manufactured to tolerance class M and provided in the SDMT configuration, the insert integrates into common milling toolholders with precise seating and repeatable indexing. The plate thickness T2 and size code 06 align with standard clamping systems, enabling rapid tool changes and minimal setup adjustments. For application support or cutting data tailored to a specific alloy and machine, Metav Werkzeuge offers technical assistance and can advise on the optimum speeds, feeds and chip thickness to exploit the insert’s advantages while keeping production predictable. Contact Metav Werkzeuge for tailored cutting data, stock availability and to secure Walter Tools Tiger·tec Gold inserts for efficient and reliable machining — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: SDMT06T208-F57-WKP35G-WALTER Designation: SDMT06T208-F57 Full designation: SDMT06T208-F57 WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 06 Thickness: T2 Tolerance class: M Plate form: Square 90° Chipbreaker: F57 Special features Series: Tiger·tec Gold Grade: WKP35G Substrate/coating: coated carbide (Hartmetall beschichtet) Material application: Steel (P), Cast iron (K) Execution: T (plate thickness/designation) FAQ What materials is this insert designed for? The SDMT06T208-F57 WKP35G insert by Walter Tools is designed primarily for steel (P) and cast iron (K) applications according to the grade and geometry. Which chip behaviour can be expected with the F57 chipbreaker? The F57 chipbreaker produces short, controlled chips under typical milling parameters; the geometry supports consistent evacuation and reduces the risk of entanglement during intermittent cuts. How does the Tiger·tec Gold series affect process stability? The Tiger·tec Gold coating on the WKP35G grade improves thermal and adhesive wear resistance, resulting in steadier tool life and reproducible cutting-edge performance across batch runs. Is the insert compatible with standard SDMT toolholders? Yes, the SDMT06T208-F57 form is compatible with standard SDMT holders; the tolerance class M and standard thickness enable precise seating and repeatable indexing. What corner radius and relief angle are supplied, and what are their machining benefits? This insert features a 0.8 mm corner radius and a 15° relief angle, a combination that balances edge strength and reduced flank contact for improved surface finish and longer life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademark and trade names are property of their respective owners. Protected brand names and product designations are used solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product.
SDMT06T208-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP35G grade for extended tool life and consistent chip control in steel machining; order through Metav Werkzeuge or request advice from our consultants for seamless integration into production. SDMT06T208-F57 WPP35G — square 90° milling insert for Stahl, Walter Tools A SDMT06T208-F57 WPP35G square 90° milling insert designed for high-productivity steel machining, featuring Tiger‑tec Gold coating and a 15° clearance for stable cutting. SDMT06T208-F57 WPP35G by Walter Tools Tiger‑tec Gold coated for high wear resistance Designed for Stahl (ISO P) milling applications 15° clearance angle, 0.8 mm corner radius Square 90° insert, thickness T2 Longer tool life through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP35G grade provides measurable improvements in durability and wear resistance. The coating reduces adhesion and abrasion at the cutting edge, which leads to a longer effective service life and fewer tool changes — a direct advantage for continuous production environments. Designed specifically for Stahl (ISO P) applications, the grade balances hardness and toughness to maintain cutting-edge performance under the heat and chip formation typical of steel machining. This translates into more predictable tool cycles and improved process economy. Stable cutting geometry for reliable process control A precisely formed square 90° geometry, a 0.8 mm corner radius and a 15° clearance angle together ensure dimensional stability and reproducible surface quality. The corner radius supports gentle entry and distributes cutting forces, which reduces the risk of chipping on interrupted cuts, while the clearance angle minimises rubbing and heat buildup behind the cutting edge. The insert’s tolerance class M and thickness T2 contribute to consistent clamping and repeatable performance, important when optimising feeds and speeds for high-volume or mixed-batch production. Practical application notes and material compatibility The insert is optimised for use on Stahl and performs reliably where typical steel machining heat and chip behaviour occur. The F57 chipbreaker geometry assists in controlled chip segmentation and evacuation, supporting safer, more efficient milling cycles. As a coated carbide grade, the insert is appropriate for a range of cutting conditions that favour a balance of wear resistance and toughness. For integration into existing toolholders, check compatibility with square 90° indexable pockets and ensure correct clamping torque to preserve the specified tolerance and stability. For reliable, productive milling with Walter Tools’ Tiger‑tec Gold technology, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMT06T208-F57-WPP35G-WALTER Product: Fräswendeschneidplatte Brand: Walter Tools Grade: WPP35G Series: Tiger‑tec Gold Facts Free clearance angle: 15° Corner radius: 0.8 mm Insert size: 06 Thickness: T2 Shape: Square 90° Tolerance class: M ISO designation: SDMT06T208-F57 WPP35G Special features Coating technology: Tiger‑tec Gold Material: coated carbide Application group: Stahl (ISO P) Chipbreaker: F57 Execution: T Series description: WPP35G — coated carbide grade optimised for steel FAQ What materials is this insert suitable for? The SDMT06T208-F57 WPP35G is optimised for Stahl (ISO P); the WPP35G grade and Tiger‑tec Gold coating are tuned for steel machining. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius increases edge strength and improves surface finish while distributing cutting forces to reduce the risk of chipping during interrupted cuts. Is this insert indexed or single-use? This is an indexable milling insert with a square 90° form; edges can be indexed according to the insert and toolholder design to extend usable life. Which chipbreaker is fitted and what is its benefit? The insert features the F57 chipbreaker, which promotes consistent chip control and evacuation in steel machining, aiding process stability and safety. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory-new article of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com