ADGT0803PER-D51 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process security and broad material capability offered by the Tiger·tec Gold grade; the coated carbide grade WKP35G delivers stable edge life and reliable chip control for continuous machining of steel and cast iron. Order the ADGT0803PER-D51 WKP35G directly via Metav Werkzeuge or ask the consultants for application advice. ADGT0803PER-D51 WKP35G milling indexable insert, Tiger·tec Gold, for steel and cast iron — Walter Tools The ADGT0803PER-D51 WKP35G is a precision milling indexable insert designed for efficient machining of steel and cast iron, combining Tiger·tec Gold coating technology with a D51 chipbreaker geometry Tiger·tec Gold coated carbide grade Suited for steel and cast iron machining Parallelogram 85° positive geometry 15° clearance angle for reduced cutting forces Faster, predictable production through optimised grade and coating The combination of the Tiger·tec Gold technology and the WKP35G grade provides a balance between wear resistance and toughness that supports extended tool life and consistent performance across mixed batches of unalloyed and alloyed steels as well as cast iron. The coated carbide construction ensures improved resistance to the thermal and abrasive loads typical in milling operations. This translates directly into fewer tool changes and a more stable process, which is particularly valuable for medium- to high-volume production runs where repeatability and uptime are priorities. Geometry that improves chip control and surface finish A parallelogram 85° insert form, paired with the chipbreaker D51 and a 15° clearance angle, is engineered to control chip formation and evacuate swarf reliably. The positive geometric layout reduces cutting forces and vibration, aiding in the generation of consistent surface quality and dimensional accuracy. The coded plate size (08) and plate thickness (03) are compatible with standard toolholders that accept this format, allowing straightforward integration into existing milling setups while preserving rigidity and stability during interrupted cuts. Process security, tolerance and workshop benefits Supplied in tolerance class G and execution T, this insert supports repeatable seating and concentricity in indexable milling systems, which is essential for serial production and tight tolerance work. The grade’s suitability for P and K workpiece groups (steel and cast iron) means a single insert family can cover a broad material spectrum, reducing inventory complexity. As a Walter Tools product, the insert benefits from established tooling know-how and quality control, offering reliable performance that helps protect productivity and reduces the frequency of costly rework. Contact Metav Werkzeuge for tailored cutting data and availability of the Tiger·tec Gold WKP35G insert; call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange technical consultation or supply Technical Data Article number: ADGT0803PER-D51-WKP35G-WALTER Label: Fräswendeschneidplatte ADGT0803PER-D51 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Grade / Sort: WKP35G Form: Parallelogram 85° Chipbreaker: D51 Material application: P / K Numbers / Core Technical Data Free angle: 15° Plate size: 08 Plate thickness: 03 Tolerance class: G Designs / Special Features Coated carbide grade WKP35G Suited for steel and cast iron machining Execution: T Stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The ADGT0803PER-D51 WKP35G is designed for machining steel and cast iron (ISO groups P and K) thanks to the WKP35G coated carbide grade and Tiger·tec Gold technology. How does the D51 chipbreaker affect machining? The chipbreaker D51 promotes controlled chip formation and evacuation, reducing recutting and improving surface quality when the insert is used under recommended cutting conditions. Which geometry helps when machining interrupted cuts? The parallelogram 85° form offers mechanical stability and contributes to lower cutting forces, making the insert suitable for interrupted milling and increased robustness in heavy engagement operations. Is this insert compatible with common toolholders? The plate format (size 08, thickness 03) and parallelogram design are compatible with standard milling toolholder families that accept this insert style; verify holder compatibility before assembly. What process advantages does the Tiger·tec Gold series provide? Tiger·tec Gold combines enhanced wear resistance with thermal stability, supporting longer tool life and consistent performance across mixed production of steels and cast irons. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names are used for clarification only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
ADGT0803PER-D51 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, a dedicated WKP35S grade for steel and cast iron, and the D51 chipbreaker for consistent chips — a setup that boosts productivity and reduces tool change frequency. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. ADGT0803PER-D51 WKP35S milling insert for steel and cast iron | Walter Tools ADGT0803PER-D51 WKP35S is an indexable milling insert designed for versatile roughing and semi-finishing in steels and cast irons, optimised for secure chip control and long tool life Tiger·tec Silver coating for high wear resistance Optimised chipbreaker D51 for consistent chips Parallelogram 85° shape for flexible engagement Suitable for steel and cast iron machining Increased throughput with a high-performance grade The combination of the WKP35S grade and the Tiger·tec Silver coating delivers reliably low wear and sustained cutting-edge stability, which translates into longer tool life and fewer interruptions in production. The insert is formulated for the thermal and mechanical demands of machining group P (steel) and group K (cast iron) according to ISO 513. For operations where predictable performance matters, the coated hardmetal substrate and the specified grade reduce flank wear and preserve cutting geometry, leading to more consistent cycle times and improved overall process economy. Predictable chip formation and surface quality Equipped with the D51 chipbreaker and a parallelogram 85° form, the insert stabilises chip flow and helps avoid irregular breakage that can damage the workpiece or tool. The 15° clearance angle supports controlled shear and minimises rubbing on the flank, favouring better surface finish and dimensional stability. Explaining the term: a chipbreaker is an engineered groove on the cutting face that shapes and segments chips, preventing long, stringy swarf and reducing the risk of tool or machine downtime. Geometry and fit for flexible milling strategies The insert designation indicates a compact size and consistent mounting: the ADGT0803PER-D51 form with plate size 08 and thickness 03 fits standard cutter bodies designed for parallelogram inserts. The execution marked "T" and tolerance class G ensure repeatable seating and interchangeability across compatible cutter heads, enabling quick index changes and maintaining process repeatability. Metav Werkzeuge supplies compatible holders and can advise on the correct seat and clamp type for specific cutter systems. Practical advantages in everyday production Using an insert optimised for both steel and cast iron reduces the need for multiple tool inventories and simplifies setup for mixed-material batches. The coated hardmetal construction improves resistance to abrasive wear common when finishing cast components, while the grade control helps manage the heat generated when machining steels. This balance of durability and versatility supports leaner tool strategies and contributes to a lower cost per component over extended running periods. Implementation notes and application scope The insert is particularly suited to roughing and semi-finish passes where chip control and robustness matter most. For finishing operations requiring mirror-like surfaces, complementary grades or toolpaths might be considered. The insert’s properties make it a practical choice for medium to heavy material removal on conventional and CNC milling machines within industrial production environments. For specific cutting data and recommended parameters for certain steel or cast-iron alloys, Metav Werkzeuge can provide detailed guidance and testing references. For application-specific recommendations or to confirm compatibility with a particular cutter body, contact Metav Werkzeuge for technical advice and ordering support — Metav Werkzeuge is available to assist with optimal tool selection and cutting data. Technical data SKU: ADGT0803PER-D51-WKP35S-WALTER Article designation: ADGT0803PER-D51 WKP35S Manufacturer: Walter Tools Product type: Milling insert Series: Tiger·tec Silver Facts Free angle (clearance): 15° Insert size: 08 Thickness: 03 Tolerance class: G Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: D51 Shape: Parallelogram 85° Material suitability: Steel (P) and Cast iron (K) Execution: T FAQ Which materials are suitable for this insert? The ADGT0803PER-D51 WKP35S milling insert (Walter Tools) is designed for machining ISO group P (steel) and ISO group K (cast iron), offering balanced wear resistance for both material families. What does the WKP35S grade provide? WKP35S is a Walter Tools coated hardmetal grade that, in combination with the Tiger·tec Silver coating, provides improved abrasion resistance and edge stability for demanding steel and cast-iron applications. How does the D51 chipbreaker affect machining? The D51 chipbreaker on the ADGT0803PER-D51 WKP35S insert shapes chips into short, manageable segments, reducing chip-related interruptions and contributing to a consistent surface finish. What is the significance of the parallelogram 85° form? The parallelogram 85° geometry enables flexible cutting engagements and varied approach angles, improving the insert’s applicability across different milling strategies while maintaining robust edge support. Which cutter bodies accept this insert designation? The ADGT0803PER-D51 WKP35S designation corresponds to standard parallelogram-style seats sized for insert size 08 and thickness 03; use of matching Walter Tools or compatible cutter bodies is recommended for correct mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation or partnership implied between Metav Werkzeuge and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
ADGT0803PER-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSP45G grade and a robust D51 chipbreaker results in extended tool life and controlled chip formation during milling of steel, stainless steel and heat-resistant alloys. Order the ADGT0803PER-D51 WSP45G inserts directly via Metav Werkzeuge or request cutting-data support from our consultants to integrate them into production quickly. ADGT0803PER-D51 WSP45G milling insert, parallelogram 85°, Tiger·tec Gold — Walter Tools The ADGT0803PER-D51 WSP45G is a coated carbide indexable insert designed for versatile face and profile milling across steel, stainless steel and superalloys, offering durable edges and consistent chip control. Tiger·tec Gold coating for extended tool life Versatile P/M/S grade for steel, stainless, superalloys Parallelogram 85° form for stable cutting 15° relief angle for secure edge engagement Dependable wear resistance for high productivity The combination of the Tiger·tec Gold coating and the WSP45G PVD grade yields a coated carbide structure optimised for sustained performance. This composition supports improved wear resistance and stable flank life under the thermal and mechanical stresses typical in milling operations. The result is fewer indexings, longer tool cycles and a reduced total cost of machining when compared with uncoated or conventional grades. Such durability is particularly beneficial for repetitive production runs where consistent tool life directly supports predictable throughput. Precision geometry for consistent surface finish The parallelogram 85° form and 15° relief angle create a cutting geometry that promotes secure engagement and controlled cutting forces. The shape helps maintain a constant contact angle between the cutting edge and workpiece, which reduces chatter and improves surface integrity. In finishing passes, this geometry supports repeatable dimensional accuracy and better workpiece appearance. For workshop planners, the stable cutting behaviour translates into less rework and a more consistent quality level across batches. Efficient chip control reduces machining interruptions Equipped with the D51 chipbreaker, the insert is engineered to form manageable chips across a range of cutting depths and feed rates. Effective chip control lowers the risk of built-up edge and prevents clogging in tight flute patterns, which in turn reduces machine downtime for clearing chips. The chipbreaker design also supports safer handling and improved coolant contact at the cutting zone, contributing to thermal stability and sustained edge integrity during medium to heavy milling operations. Flexible performance across demanding materials The grade is explicitly suitable for the ISO material groups P, M and S, meaning the insert handles unalloyed and alloyed steel, stainless steel and heat-resistant superalloys/titanium. Its balanced ductility and coating technology allow secure chip formation when machining tougher or more adhesive materials. The solution is therefore appropriate for job shops and production environments in automotive, mechanical engineering and aerospace where mixed-material batches and high process reliability are required. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools ADGT0803PER-D51 WSP45G inserts for production; technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: ADGT0803PER-D51-WSP45G-WALTER Manufacturer: Walter Tools Type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WSP45G Facts Relief angle: 15° Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Chipbreaker: D51 Tolerance class: G Execution: T Special features Coating / grade: Tiger·tec Gold, WSP45G (coated carbide) Suitable for: Steel (P), Stainless steel (M), Superalloys and titanium (S) Application: versatile milling for face and profile operations Robust chip control and stable cutting edge FAQ Which materials are best machined with this insert? The ADGT0803PER-D51 WSP45G insert (Walter Tools) is suitable for ISO groups P, M and S — that is steel, stainless steel and heat-resistant superalloys/titanium. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSP45G grade increases wear resistance and thermal stability, extending edge life and supporting consistent performance in milling. How does the parallelogram 85° form affect machining? The parallelogram 85° geometry promotes steady cutting engagement and reduced vibration, which helps achieve consistent surface finish and dimensional repeatability. What role does the D51 chipbreaker play? The D51 chipbreaker is designed for controlled chip formation across a range of cutting conditions, lowering the risk of built-up edge and reducing interruptions for chip clearing. For which applications is this insert particularly suited? This indexable insert is well suited to versatile face and profile milling tasks in sectors requiring process reliability, such as automotive components, general engineering and aerospace structural parts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for descriptive purposes only and do not imply any affiliation or endorsement. The offered article is an original, factory-new product of the manufacturer.
ADGT0803PER-F56 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for stable edge life and reliable chip formation in demanding materials; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Fräswendeschneidplatte ADGT0803PER-F56 WSM35G — indexable milling insert with Tiger·tec Gold coating by Walter Tools Fräswendeschneidplatte ADGT0803PER-F56 WSM35G is an indexable milling insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys, offering a robust coated-carbide grade and a geometry optimised for secure chip control Tiger·tec Gold coating for thermal stability Optimised chipbreaker F56 for secure chip control Parallelogram 85° form with 15° free angle Suitable for rostfreier Stahl and superalloys Superior coating that extends cutting performance The Tiger·tec Gold surface treatment combined with the WSM35G grade delivers improved wear resistance and heat tolerance for prolonged cutting intervals. This coating system is engineered to reduce built-up edge formation when machining tough-to-cut materials, which in turn maintains a consistent cutting edge and reduces downtime for tool changes. For production environments where cycle time and repeatability matter, the coated-carbide chemistry provides a tangible improvement in tool life and process stability. Geometry and chip management that protect the cutting edge The parallelogram 85° plate geometry together with a 15° free angle and the F56 chipbreaker work in concert to stabilise the cutting process. The insert’s form directs chips away from the cutting zone and minimises adverse contact, which preserves the tool edge. As a result, operators benefit from predictable surface finish and reduced risk of edge chipping when tackling heavy cross-sections or interrupted cuts—advantages that are particularly relevant in rostfreier Stahl and titanium-rich nickel alloys. Application focus: consistent results on demanding materials This insert is tailored for materials classified under M and S in ISO 513: rostfreier Stahl and heat‑resistant superalloys or titanium. The combination of grade and geometry supports reliable chip formation and thermal resistance, helping to avoid common issues such as work hardening and thermal softening of the cutting edge. In practical terms, the result is fewer tool interventions, a steadier process window and improved component quality during series production. Practical benefits for workshop efficiency With a compact insert thickness 03 and tolerance class G, the component integrates into standard toolholders with predictable mounting accuracy. The plate’s profile and stable coating enable efficient material removal rates while safeguarding dimensional repeatability. For shops aiming to raise throughput without compromising surface integrity, the insert contributes to smoother scheduling, fewer reworks and a more predictable consumption of cutting tools. Contact Metav Werkzeuge to discuss how the Tiger·tec Gold ADGT0803PER-F56 WSM35G insert fits specific rostfreier Stahl or superalloy applications and to reserve inventory under SKU ADGT0803PER-F56-WSM35G-WALTER Technical Data Article number: ADGT0803PER-F56-WSM35G-WALTER SKU: ADGT0803PER-F56-WSM35G-WALTER Product type: Fräswendeschneidplatte Facts Plate size: 08 Thickness: 03 Free angle: 15° Plate form: Parallelogram 85° Tolerance class: G Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F56 Material suitability: rostfreier Stahl; superalloys / titanium Series: Tiger-tec Gold Execution: T FAQ What materials is this insert best suited for? The Fräswendeschneidplatte ADGT0803PER-F56 WSM35G is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering a coated-carbide grade that supports secure chip formation. Which geometry features improve chip control? The parallelogram 85° form, combined with the F56 chipbreaker and a 15° free angle, enhances chip evacuation and reduces cutting forces, which helps to maintain edge integrity during heavy cuts. Is the coating suitable for high-temperature applications? Yes, the Tiger·tec Gold coating on the WSM35G grade is formulated for thermal stability and wear resistance, making it appropriate for elevated cutting temperatures encountered with rostfreier Stahl and superalloys. Can this insert be used in standard milling toolholders? The insert’s dimensions and tolerance class G ensure compatibility with common indexable milling toolholders designed for this plate format; verify holder compatibility with the ADGT0803PER-F56 geometry. What is the recommended way to order or get advice? For application-specific recommendations and availability, contact Metav Werkzeuge referencing SKU ADGT0803PER-F56-WSM35G-WALTER to ensure the correct grade and geometry for the task. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT0803PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a high-performance PVD-coated Tiger·tec Gold grade that combines reliable edge stability and broad material suitability for efficient milling operations; the insert’s chipbreaker F56 and 15° clearance angle improve chip control and surface quality while supporting longer tool life. Order directly via Metav Werkzeuge or contact their specialists for application advice. ADGT0803PER-F56 WSP45G — Milling insert (Tiger·tec Gold) by Walter Tools, for steel / stainless / superalloys ADGT0803PER-F56 WSP45G is a PVD-coated carbide milling insert engineered for versatile milling tasks in steel, stainless steel and heat-resistant superalloys. Tiger·tec Gold PVD coating Suitable for steel, stainless, superalloys Parallelogram 85° shape for stability 15° clearance angle for secure cutting Versatile PVD-coated grade for productive milling The Tiger·tec Gold grade WSP45G offers a balance of toughness and wear resistance that suits a wide range of milling tasks. As a PVD-coated carbide solution, this insert supports predictable wear progression and stable edge life, which reduces unscheduled tool changes and contributes to a steady production rhythm. The combination of coating technology and substrate hardness enables consistent results when machining common structural steels as well as more demanding stainless grades. Geometry built for cutting stability and repeatability The parallelogram 85° plate form together with a 15° clearance angle delivers a stable cutting geometry that reduces vibration and supports good surface finish in through-cut and slotting operations. With an insert size 08 and thickness 03, the design provides an adequate support area in the seat for reliable clamping and repeatable positioning, while the tolerance class G ensures dimensional consistency across batches — important when quick insert indexing is part of the production cycle. Controlled chip formation and application range The chipbreaker F56 is optimised for secure chip formation across the P/M/S material groups. This means better evacuation of swarf when cutting both low-alloy steels and stainless steels, and improved control when machining heat-resistant superalloys or titanium where poor heat dissipation can overburden the cutting edge. The insert’s construction supports mixed-shop flexibility: one grade covers several material classes, reducing tool inventory complexity without compromising performance. Productivity and application advice for milling processes Used in general-purpose and semi-finishing milling routines, this insert contributes to predictable cycle times and lower total tooling effort. The robust edge and coating combination helps to maintain dimensional accuracy over longer runs, translating into fewer interruptions and higher throughput. For best results, pair the insert with suitably rigid toolholders and adjust cutting data to the workpiece material; Metav Werkzeuge consultants can provide tailored recommendations for feed and speed settings based on specific machine and application parameters. Discuss specific machining requirements with Metav Werkzeuge and secure the ADGT0803PER-F56 WSP45G to enhance milling stability and tool life — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application-focused advice Technical data SKU: ADGT0803PER-F56-WSP45G-WALTER Designation: ADGT0803PER-F56 WSP45G Type: Milling insert (fräswendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Gold Core specifications Clearance angle: 15° Insert size: 08 Thickness: 03 Plate form: Parallelogram 85° Tolerance class: G Chipbreaker: F56 Materials & features Grade: WSP45G (PVD-coated carbide) Applicable materials: steel (P), stainless steel (M), superalloys / titanium (S) Execution: T Benefits: stable chip formation, versatile P/M/S performance, wear-resistant coating FAQ What materials is this insert suited for? The ADGT0803PER-F56 WSP45G from Walter Tools is suitable for machining steel, stainless steel and heat-resistant superalloys/titanium (material groups P, M and S). What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on this insert improves wear resistance and edge stability, so the ADGT0803PER-F56 WSP45G maintains cutting performance over longer runs. How does the chipbreaker F56 affect machining? Chipbreaker F56 promotes secure chip formation and reliable evacuation, supporting improved surface quality and reduced risk of built-up edge when milling diverse materials. Why is the parallelogram 85° form beneficial? The parallelogram 85° geometry increases cutting stability and reduces vibration, which helps achieve consistent finishes and repeatable tool indexing for the ADGT0803PER-F56 WSP45G. What role does the 15° clearance angle play? The 15° clearance angle provides a favourable balance between edge support and cutting clearance, contributing to secure cutting action and extended insert life. The Walter AG (brand presentation: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT10T330R-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, a robust 3 mm corner radius and a parallelogram geometry for reliable chip control and consistent production results; order directly via Metav Werkzeuge or consult the specialists for process optimisation. ADGT10T330R-D67 WSP45G — Parallelogram 85° milling insert with Tiger·tec Gold coating (Walter Tools) A high-performance ADGT10T330R-D67 WSP45G milling insert designed for versatile milling tasks across Stahl, rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Gold PVD-coated carbide WSP45G Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° insert with 15° relief angle 3 mm corner radius for robust edge stability Productivity through a proven cutting concept The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balanced performance that targets high productivity in milling operations. The PVD layer increases resistance to abrasive wear while maintaining edge toughness, which supports stable cutting and reliable tool life when machining common construction and alloyed materials such as Stahl. The coated carbide substrate is engineered for repeatable performance across shifting workpiece batches, reducing unexpected tool changes and downtime. By favouring process certainty, the insert helps secure cycle times and throughput in serial production. Geometry designed for secure chip control and edge stability The parallelogram 85° shape together with a 15° relief angle and a 3 mm corner radius creates a geometry that balances strength and accessibility. The insert form provides favourable entry angles for slotting and shoulder milling, while the D67 chipbreaker supports predictable chip formation under varying cutting conditions. The T3 plate thickness increases rigidity at the cutting edge, improving resistance to chipping during interrupted cuts and lending itself to heavier milling passes where edge stability is crucial. These geometric features translate into fewer reworks and consistent surface quality. Versatility and application focus for process optimisation Rated for material groups P, M and S (as indicated by the designation P / M / S), this grade is suitable for operations that require adaptability between general-purpose steels, rostfreier Stahl and heat‑resistant alloys or titanium components. The insert’s construction supports secure performance in mixed-production environments where tool changes must be minimised. Selecting this grade can contribute to predictable tool life and easier tooling standardisation across machine parks, supporting leaner inventory and more straightforward tooling strategies. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts or to request procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: ADGT10T330R-D67-WSP45G-WALTER Designation: ADGT10T330R-D67 WSP45G Product type: Fräswendeschneidplatte Facts Relief angle: 15° Corner radius: 3 mm Insert size: 10 Plate thickness: T3 Shape: Parallelogram 85° Tolerance class: G Special features Series: Tiger-tec Gold Grade / coating: WSP45G (PVD-coated carbide) Material groups: P / M / S Chipbreaker: D67 Execution: T FAQ Which materials are suited to this insert? The ADGT10T330R-D67 WSP45G insert from Walter Tools is intended for machining Stahl, rostfreier Stahl and heat‑resistant superalloys, consistent with the P / M / S designation of the WSP45G grade. Is the geometry suitable for roughing and semi‑finishing? Yes, the parallelogram 85° form together with the D67 chipbreaker and a 3 mm corner radius allows for robust roughing passes and controlled semi‑finishing while maintaining edge stability. What advantages does the Tiger·tec Gold grade bring? The Tiger·tec Gold technology provides a PVD coating that enhances wear resistance and edge life, offering stable cutting performance and improved process security in diverse milling applications. Can this insert support interrupted cuts and heavy engagement? The T3 plate thickness, 3 mm corner radius and sturdy geometry of the ADGT10T330R-D67 WSP45G promote resistance to chipping and secure cutting under intermittent loads, supporting heavier engagement values when required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT10T3PER-D67 WKP35G Wendeplatten - Walter Tools
Benefit from a balanced combination of Tiger·tec Gold coating and robust chip control for consistently productive milling; the insert delivers long tool life and reliable performance in steel and cast iron applications. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADGT10T3PER-D67 WKP35G milling insert — Tiger·tec Gold coated, for steel and cast iron, Walter Tools ADGT10T3PER-D67 WKP35G is a precision milling insert designed for versatile engagement in general-purpose and heavy-duty milling of steels and cast irons. Tiger·tec Gold coating for extended life Optimised D67 chipbreaker geometry Parallelogram 85° form for versatile engagement Designed for steel and cast iron machining Proven coating that extends productive tool life The Tiger·tec Gold coating, paired with the WKP35G grade, provides a durable, wear-resistant cutting edge engineered for repeatable performance. This coated carbide formulation is optimised for the thermal and mechanical demands of machining P- and K-group materials, which translates into sustained cutting edges and fewer insert changes. For operations where cycle time and tool-change frequency directly affect throughput, this surface treatment helps to reduce downtime and maintain consistent component quality by resisting abrasive wear and chipping. Geometry and chip control that lift throughput A dedicated chipbreaker, designated D67, and the insert’s parallelogram 85° form work together to control chip formation and evacuation during milling. The combination of the chipbreaker geometry and the insert shape promotes short, manageable chips when cutting steels and cast irons, reducing the risk of entanglement and improving surface finish. The specified 15° clearance angle aids in avoiding rubbing and lowers cutting forces, enabling higher material removal rates while protecting the toolholder and spindle from undue loads. Broad material compatibility with clear application guidance This grade is validated for machining both steel (P) and cast iron (K) in accordance with ISO grouping conventions. That means the insert is tailored to cope with the high temperatures and ductile chip forms of steels, as well as the abrasive and often brittle chips from cast irons. For operations that mix workpiece types, the coated carbide and chip geometry offer a pragmatic compromise: reliable edge stability for steels and controlled wear behaviour for cast irons. Selection should consider workpiece hardness and component geometry to match cutter diameter and engagement. Consistent tolerance, series quality and practical handling Manufactured to tolerance class G and supplied in the Tiger·tec Gold series, the component emphasises reproducibility and dimensional reliability across batches. The insert thickness T3 and size designation 10 support defined clamping engagement and flute fill in standard milling cutters. Such specification clarity makes tool presetting and inventory management more efficient, while the standardized form simplifies changeover in high-mix production environments. The result is predictable tool life and easier process planning. For high-throughput milling with proven Tiger·tec Gold performance, order the Walter Tools ADGT10T3PER-D67 WKP35G via Metav Werkzeuge or request tailored application advice from our specialists. Technical data Article number: ADGT10T3PER-D67-WKP35G-WALTER Product type: milling insert Series: Tiger-tec Gold Grade: WKP35G Material suitability: Steel (P) / Cast iron (K) Insert size: 10 Thickness: T3 Shape: Parallelogram 85° Clearance angle: 15° Chipbreaker: D67 Execution: T Tolerance: class G Manufacturer: Walter Tools Facts SKU: ADGT10T3PER-D67-WKP35G-WALTER Coating: Tiger·tec Gold (coated carbide) Primary application: milling of P and K groups Series designation: Tiger·tec Gold Tolerance class: G Special features Coated carbide grade for improved wear resistance Optimised chip control geometry Parallelogram form for flexible cut entry angles Designed for catalogue-geometry dependent milling tasks FAQ What materials is this insert suitable for? The ADGT10T3PER-D67 WKP35G insert is specified for steel (P) and cast iron (K) in line with ISO material groupings, making it appropriate for a wide range of standard milling tasks in these materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKP35G grade increases abrasive wear resistance and edge stability, which helps to extend service life and maintain component quality over longer production runs. What role does the D67 chipbreaker play? The D67 chipbreaker promotes short, controlled chips and reliable evacuation, reducing the likelihood of chip-related interruptions and improving surface finish during milling of steel and cast iron. Is this insert suited for stainless steel? Stainless steel suitability is not indicated for this grade; the ADGT10T3PER-D67 WKP35G is optimised for P and K groups. For austenitic or difficult-to-machine stainless steels, a dedicated grade should be selected. What does the parallelogram 85° form mean for cutter setup? The parallelogram 85° form allows versatile engagement angles and can improve accessibility in certain cutter head designs; it is especially useful when axial and radial engagements vary across an operation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for clarification of product origin. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADGT10T3PER-D67 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP35S grade for extended tool life and reliable chip control; the parallelogram 85° form and 15° clearance angle ensure stable engagement and consistent part quality. Order directly via Metav Werkzeuge or consult our technical team for application support. ADGT10T3PER-D67 WKP35S milling insert – Tiger‑tec Silver coating for steel and cast iron (Walter Tools) The ADGT10T3PER-D67 WKP35S is a precision parallelogram 85° milling insert optimised for productive machining of steel and cast iron in demanding milling operations Tiger‑tec Silver coating for wear resistance WKP35S grade for steel and cast iron Parallelogram 85° form for stable milling 15° clearance angle for versatile engagement Increased productivity through a wear‑resistant coating and robust grade The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers noticeably improved wear resistance and edge stability compared with uncoated grades. Coated carbide technology reduces flank wear and extends the useful life of the insert during continuous milling operations, which translates into fewer indexings and lower tool-change downtime. For workshops processing a mix of steel and cast iron, this means more consistent cycle times and reduced tool consumption without compromising surface finish. Geometry that improves process stability and surface quality The parallelogram 85° form provides a secure cutting engagement and helps distribute cutting forces evenly across the insert, reducing vibration in interrupted or heavy cuts. Combined with a 15° clearance angle, the geometry supports varied entry angles and chip formation, enabling stable milling across a range of feeds. The modest T3 thickness contributes to reliable clamping in standard toolholders while maintaining the rigidity required for repeatable machining, so part tolerances remain intact even during medium‑duty milling. Better chip control and predictable machining results The integrated chipbreaker D67 is designed to promote manageable, short chips in mixed materials, which helps maintain coolant flow and prevents recutting. As an indexable insert, the component allows fast reorientation to a fresh cutting edge, minimising stoppages and supporting sustained productive machining. For production environments where process reliability matters, these characteristics reduce scrap rates and support stable throughput across batches. Clear indications for material suitability and tool integration This insert is specified for machining steel (P) and cast iron (K) in accordance with the grade designations; it is not indicated for rostfrei (stainless) applications in the provided data. The designation and tolerance class G ensure consistent fitment in compatible holders, and the compact plate size 10 suits applications where a smaller insert footprint is required without sacrificing edge strength. When pairing the insert with tooling, choose holders certified for the parallelogram geometry to preserve clamping integrity and repeatability. For reliable results with Walter Tools’ Tiger‑tec Silver inserts, contact Metav Werkzeuge for application guidance or to arrange supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ADGT10T3PER-D67-WKP35S-WALTER Designation: ADGT10T3PER-D67 WKP35S Manufacturer: Walter Tools Facts Free angle: 15° Plate form: Parallelogram 85° Plate size: 10 Thickness: T3 Tolerance class: G Chipbreaker: D67 Special features Coating: Tiger‑tec Silver Grade: WKP35S (coated carbide) Material suitability: Steel (P) and Cast iron (K) Series: Tiger‑tec Silver FAQ What materials is this insert suitable for? The ADGT10T3PER-D67 WKP35S milling insert is specified for steel (P) and cast iron (K) applications according to the grade designation WKP35S. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the Walter Tools insert reduces abrasive wear and improves edge life, which supports longer tool cycles and more consistent surface finishes in daily production. What role does the chipbreaker D67 play? The D67 chipbreaker promotes short, controlled chips in mixed materials, improving chip evacuation and reducing the risk of recutting during milling. Why is the parallelogram 85° form important? A parallelogram 85° insert distributes cutting forces more evenly and enhances stability in interrupted cuts, helping to maintain dimensional accuracy and reduce tool vibration. How is the designation ADGT10T3PER-D67 WKP35S structured? The designation describes the insert geometry and size (ADGT10T3PER-D67) coupled with the WKP35S coated carbide grade; the SKU ADGT10T3PER-D67-WKP35S-WALTER uniquely identifies the Walter Tools article. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered article is original, factory‑new goods from the manufacturer (Walter Tools).
ADGT10T3PER-D67 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and the WSM35G grade for secure chip formation and long tool life when machining stainless steels and heat‑resistant superalloys; order the ADGT10T3PER‑D67 WSM35G inserts directly via Metav Werkzeuge or consult our specialists for application advice. ADGT10T3PER‑D67 WSM35G milling insert — for stainless steel and superalloys, Tiger·tec Gold by Walter Tools The ADGT10T3PER‑D67 WSM35G milling insert is engineered to deliver stable cutting edges and controlled chip evacuation for demanding applications in stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for long tool life Designed for stainless steel and superalloys Parallelogram 85° for stable cutting edge 15° clearance angle; secure chip flow High reliability for tough materials and continuous processes The coated grade WSM35G from Tiger·tec Gold is designed to maintain a stable cutting edge under thermal and mechanical load, which directly improves process reliability and reduces unplanned tool changes. For machining stainless steels and superalloys, the insert’s composition and coating promote secure chip control, limit cold welding and edge build‑up, and support consistent surface quality. This delivers measurable productivity benefits in medium‑to‑high duty milling operations where repeatable performance is essential. Geometry focused on edge stability and chip management The parallelogram 85° form combined with a 15° free angle and T3 thickness provides a robust seating and an advantageous cutting orientation that stabilises the insert under intermittent and continuous cuts. The integrated chipbreaker D67 shapes chips to avoid tangling and to foster steady evacuation, which helps maintain cutting parameters and tool life. The design reduces vibration transmission and improves dimensional accuracy on workpieces that demand consistent finishes. Clear suitability and material guidance The insert’s designation and material grouping indicate suitability for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium). In practice, the WSM35G grade is a coated carbide arranged to withstand high temperatures and abrasive conditions typical for these materials; it therefore supports machining strategies that prioritise edge life and stable material removal. Selection of matching cutter bodies and correct clamping torque ensures the geometry’s advantages are fully realised. Practical handling and process integration With tolerance class G and the standardised ISO designation, the insert is intended for straightforward replacement and predictable tool offsets in milling systems. The insert’s technical characteristics enable planners to define cutting data with reduced safety margins, improving throughput without compromising surface integrity. For specific application parameters or verification against machine capabilities, Metav Werkzeuge provides tailored advice and can assist with compatibility checks and batch availability. Contact Metav Werkzeuge for application support and immediate availability of Walter Tools ADGT10T3PER‑D67 WSM35G inserts via phone or email: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: ADGT10T3PER-D67-WSM35G-WALTER Name: Fräswendeschneidplatte ADGT10T3PER‑D67 WSM35G Manufacturer: Walter Tools Product type: milling insert Series: Tiger·tec Gold Core specifications Tolerance class: G Free angle: 15° Plate form: Parallelogram 85° Plate size: 10 Plate thickness: T3 Special features Chipbreaker: D67 Grade/coating: Tiger·tec Gold, WSM35G (coated carbide) Suitable materials: stainless steels (M), superalloys/titanium (S) Execution: T FAQ What materials is this insert best suited for? The ADGT10T3PER‑D67 WSM35G insert is specified for ISO groups M and S, meaning it is particularly suitable for stainless steels and heat‑resistant superalloys/titanium when used with appropriate cutter bodies and cutting data. How does the chipbreaker D67 help in milling? The chipbreaker D67 on the ADGT10T3PER‑D67 WSM35G shapes chips for controlled evacuation, reducing the risk of clogging and enabling stable cutting forces during medium‑to‑heavy milling operations. Can this insert be used for finishing as well as roughing? Depending on cutter setup and cutting parameters, the WSM35G grade supports both productive material removal and consistent surface quality; geometry choices determine whether the ADGT10T3PER‑D67 WSM35G is applied for semi‑finishing or more aggressive passes. What are the key geometric benefits of the insert form? The parallelogram 85° geometry combined with a 15° clearance angle and T3 thickness improves edge stability and seating rigidity, which contributes to dimensional accuracy and extended edge life under dynamic loads. Is the insert compatible with standard cutter bodies? The ADGT10T3PER‑D67 WSM35G follows ISO‑style designation and tolerance class G, facilitating compatibility with matching cutter bodies designed for this insert shape; correct clamping and seat condition remain essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original factory‑new goods from the manufacturer.
ADGT10T3PER-D67 WSM35S T Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature stability and precise chip control for more consistent productivity; order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific data. ADGT10T3PER-D67 WSM35S milling indexable insert — Tiger·tec Silver for difficult-to-machine materials by Walter Tools ADGT10T3PER-D67 WSM35S is a milling indexable insert designed for high thermal loads and secure chip formation, ideally used on stainless steels and heat-resistant superalloys in demanding production environments Tiger·tec Silver coating for heat resistance WSM35S grade for stainless and superalloys Parallelogram 85° form, 15° clearance angle Long tool life through heat-resistant coating and grade The Tiger·tec Silver coating combined with the WSM35S coated-carbide grade provides enhanced thermal resistance and a stable cutting edge when facing high temperatures typical of machining stainless steels and superalloys. The layered coating reduces adhesive wear and supports stable chip formation, which in turn lowers the frequency of tool changes and increases effective machine uptime. For workshops aiming at repeatable machining results, this translates into measurable gains in process reliability and reduced non-productive time. Geometry engineered for predictable chips and surface quality The insert’s parallelogram 85° form together with the D67 chipbreaker and a 15° clearance angle gives a balanced cutting geometry that promotes controlled chip flow and good surface integrity. The T3 thickness adds mechanical stiffness, improving resistance to edge chipping under interrupted cuts or heavy engagement. These geometric features help to reduce recutting of chips and improve tool life stability, which is particularly relevant for milling operations where consistent part finish and dimensional stability are required. Broad application range with production-focused benefits Specified for difficult-to-machine materials, the insert suits operations involving stainless steel and heat-resistant alloys (ISO groups M and S). Its tolerance class G ensures consistent interchangeability and predictable behaviour across tool changes. By combining a modern coating system with a robust grade and targeted chip control, the insert supports higher cutting parameters where appropriate, enabling shorter cycle times and a favourable cost-per-part metric without compromising on repeatability or safety of the cutting edge. For procurement or technical evaluation of this Walter Tools ADGT10T3PER-D67 WSM35S milling indexable insert, contact Metav Werkzeuge for tailored advice and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADGT10T3PER-D67-WSM35S-WALTER Name: ADGT10T3PER-D67 WSM35S Type: milling indexable insert Manufacturer: Walter Tools Core specifications Series: Tiger-tec Silver Grade: WSM35S Chipbreaker: D67 Plate form: Parallelogram 85° Free angle: 15° Thickness: T3 Plate size: 10 Tolerance class: G Designs and special features Coated carbide (coated hard metal) Intended for stainless steel (M) and superalloys/titanium (S) Optimised for stable chip formation Robust cutting edge for heavy-duty milling Suitable for demanding production environments FAQ What materials is this insert suitable for? The insert is intended for difficult-to-machine materials and explicitly for stainless steel (ISO group M) and heat-resistant superalloys/titanium (ISO group S), thanks to the WSM35S grade and Tiger·tec Silver coating. What advantage does the D67 chipbreaker provide? The D67 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip re-cutting during milling operations. Which geometry does the insert use and why does it matter? The parallelogram 85° form with a 15° clearance angle increases engagement flexibility and contributes to predictable cutting forces and effective chip control in a wide range of milling applications. How does the Tiger·tec Silver series affect tool life? The Tiger·tec Silver coating enhances thermal stability and wear resistance of the coated-carbide grade, supporting longer edge life and more consistent performance when machining thermally demanding alloys. Is this insert compatible with standard milling toolholders? The insert’s form and tolerance class G are designed for reliable interchangeability; the ADGT10T3PER-D67 WSM35S insert fits holders that accept its parallelogram 85° geometry and T3 thickness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands; the offered item is an original, factory-new product of the manufacturer.
ADGT10T3PER-D67 WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating and the versatile WSP45G grade for reliable chip control and extended tool life; order directly via Metav Werkzeuge or consult our experts for application advice. ADGT10T3PER-D67 WSP45G – Parallelogramm milling insert with Tiger‑tec Gold coating by Walter Tools The ADGT10T3PER-D67 WSP45G is a coated carbide milling insert designed for robust milling in steel, stainless steel and heat‑resistant alloys, offering stable cutting with a Parallelogram 85° geometry. Tiger‑tec Gold PVD coating for long tool life Designed for P, M and S material groups Parallelogram 85° shape for versatile engagement 15° clearance and T3 thickness for stable cutting Raise productivity with advanced coating and grade The combination of Tiger‑tec Gold coating and the WSP45G grade provides a clear productivity advantage when milling demanding materials. The PVD coating improves wear resistance and reduces built‑up edge, which leads to longer intervals between indexing and fewer tool changes. Because the grade is formulated for the P/M/S groups, the insert maintains cutting-edge integrity across unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. This translates into a more predictable process, reduced machining downtime and improved overall throughput on production lines. Consistent chip control and process stability The Parallelogram 85° form combined with the D67 chipbreaker is engineered to promote secure chip formation and evacuation. Stable chip control reduces rework and the risk of surface damage, especially in interrupted or trochoidal milling operations. The design also supports lower cutting forces in mixed‑material batches, offering improved tool life and consistent surface finish. Clearances and geometry have been balanced to limit vibration and thermal loading, so the insert performs reliably in both roughing and semi‑finishing cycles. Practical benefits for tool management and set‑ups With a T3 thickness and a 15° clearance angle, the insert provides a dependable balance of rigidity and accessibility for varied tool holders and rotative speeds. The concise geometry simplifies index management and reduces spindle dwell for re‑cuts. For workshop planners, this means predictable tool consumption and easier inventory standardisation: the grade’s broad material capability reduces the need for multiple specialised inserts. Where process security and repeatability matter, this insert supports consistent cycle times and quality outcomes. For tailored application advice or to procure Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical consultation and supply arrangements Technical data SKU: ADGT10T3PER-D67-WSP45G-WALTER Designation: ADGT10T3PER-D67 WSP45G Manufacturer: Walter Tools Core data Insert size: 10 Thickness: T3 Clearance angle: 15° Tolerance class: G Form angle: Parallelogram 85° Special features Coating: Tiger‑tec Gold Grade: WSP45G Chipbreaker: D67 Material groups: P / M / S Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The ADGT10T3PER-D67 WSP45G is specified for the P, M and S groups, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys/titanium. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating on this insert enhances wear resistance and thermal stability, which prolongs cutting edge life and supports consistent machining results. Which chipbreaker should be used for heavy roughing? The D67 chipbreaker supplied with the insert is designed to manage chips effectively in heavier cuts, improving evacuation and reducing the likelihood of edge build‑up. Is the Parallelogram 85° form suitable for slotting and face milling? Yes; the Parallelogram 85° geometry offers flexible engagement and is appropriate for both slotting and face operations where secure seating and edge stability are required. How does the T3 thickness affect tool life and rigidity? A T3 thickness provides a good compromise between rigidity and accessibility, supporting stable cutting forces while allowing efficient indexing and setup in various holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory‑new product from Walter Tools.
ADGT10T3PER-G77 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended tool life, ensuring consistent machining of stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or contact their consultants for application support. ADGT10T3PER-G77 WSM35G milling indexable insert – Tiger·tec Gold, 15° free angle (Walter Tools) The ADGT10T3PER-G77 WSM35G is a Tiger·tec Gold‑coated milling insert designed for robust milling of stainless steels and heat‑resistant alloys in demanding industrial applications Tiger·tec Gold coating for high temperature stability WSM35G grade for stainless steel and superalloys Parallelogram 85° shape for robust milling engagement G77 chipbreaker for reliable chip formation Built for stable machining of difficult materials The combination of the Tiger·tec Gold coating and the WSM35G cemented‑carbide grade delivers notable advantages when machining stainless steels and superalloys. The coating increases thermal stability, reducing adhesion and built‑up edge during high‑temperature cutting, while the substrate grade supports a consistent wear behaviour. For production environments where cycle time and tool life directly affect throughput, this insert provides a predictable performance profile that helps to minimise unplanned tool changes and maintain a steady production flow. The design is particularly suitable where controlled chip formation and edge integrity are essential. Geometry and chip control that improve process security The parallelogram 85° cutting geometry and 15° free angle combine to offer a secure cutting engagement and allow for favourable cutting directions in common milling setups. The T3 thickness contributes to insert rigidity under heavier axial loads, reducing the risk of vibration and flank wear. The integrated G77 chipbreaker facilitates short, controlled chips in interrupted and continuous milling, lowering the likelihood of chip packing and improving surface finish. In this way, fewer corrective passes are required and the machining process becomes more efficient — a tangible benefit for high‑mix or high‑volume production. Practical benefits and recommended applications This milling insert is tailored to demanding sectors where stainless steels and heat‑resistant materials challenge tooling performance. Typical applications include roughing and semi‑finishing operations where edge stability and heat resistance are priorities. The insert’s specifications support straightforward tool‑path strategies: conservative feeds and speeds deliver extended life, while optimised cutting parameters take advantage of the coating to increase productivity where thermal loads are higher. For shops seeking to harmonise tool inventories, the insert offers a reliable option for a broad range of corrosion‑resistant and high‑temperature alloys, contributing to consistent part quality and lower overall tooling costs. For process‑critical milling of stainless steels and superalloys, contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and order the ADGT10T3PER‑G77 WSM35G for reliable, repeatable results Technical Data Article number: ADGT10T3PER-G77-WSM35G-WALTER Name: Fräswendeschneidplatte ADGT10T3PER-G77 WSM35G Manufacturer: Walter Tools Facts Free angle: 15° Plate size: 10 Plate thickness: T3 Tolerance class: G Plate form: Parallelogramm 85° Special features Coating technology: Tiger·tec Gold Grade: WSM35G (coated cemented carbide) Chipbreaker: G77 Applicable material groups: M (stainless steels), S (heat‑resistant alloys and titanium) Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The ADGT10T3PER‑G77 WSM35G milling insert by Walter Tools is suitable for stainless steels (M) and heat‑resistant alloys/titanium (S) according to the grade characteristics. How does the G77 chipbreaker affect machining? The G77 chipbreaker on this Walter Tools insert produces short, controllable chips, improving chip evacuation and surface quality during milling operations. Which cutting conditions suit the Tiger·tec Gold coating? The Tiger·tec Gold coating on the ADGT10T3PER‑G77 WSM35G is optimised for higher thermal loads, so increased cutting speeds and moderate feeds that generate heat will benefit from enhanced tool life and reduced edge failure. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. Protected brand names and trademarks are cited for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the respective trademark owners. The offered article is original, factory‑new merchandise from the manufacturer Walter Tools.
ADGT10T3PER-G77 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold PVD coating and a robust G77 chipbreaker delivers consistent cutting performance and extended tool life for a wide range of materials. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. ADGT10T3PER-G77 WSP45G — Milling indexable insert (Tiger·tec Gold PVD, Parallelogram 85°) – Walter Tools The ADGT10T3PER-G77 WSP45G is a parallelogram milling insert designed for high-productivity machining of steel, stainless steel and heat-resistant alloys in general milling applications. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° geometry for positive engagement 15° clearance angle for controlled cutting High productivity through coating and chip control The insert combines a Tiger·tec Gold PVD coating with the WSP45G grade to provide a balance of wear resistance and toughness. This combination improves edge stability under variable cutting conditions and reduces the frequency of insert changes, supporting uninterrupted production cycles. The integrated G77 chipbreaker promotes predictable chip formation, which reduces vibration and helps maintain a consistent surface finish during medium to heavy milling passes. Geometry and mounting that enhance process security The parallelogram 85° insert shape and its 15° clearance are engineered to produce a stable cutting engagement and secure clamping in standard milling heads. This geometry contributes to controlled radial forces and favourable chip flow, which in turn supports reliable tool performance and repeatable results across batches. For workshops seeking to reduce set-up variability, the positive rake and shape support straightforward indexation and quick replacement. Versatility across demanding materials Assigned to material groups P / M / S, the grade is optimised for machining unalloyed and alloyed steel, stainless steel and heat-resistant superalloys including titanium-based materials. The coated carbide substrate delivers heat resistance and edge retention where poor thermal conductivity of the workpiece would otherwise shorten tool life. For applications requiring both robustness and adaptability, this insert offers a practical balance between life expectancy and machining reliability. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADGT10T3PER-G77-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT10T3PER-G77 WSP45G Walter Tools Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADGT10T3PER-G77 WSP45G Key figures Insert size: 10 Thickness: T3 Clearance angle: 15° Tolerance class: G Insert form: Parallelogram 85° Special features Coating: Tiger·tec Gold (PVD) Applicable materials: Steel, stainless steel, superalloys (P / M / S) Chipbreaker: G77 Execution: T (T-type thickness) Coated carbide grade for versatile milling applications FAQ What materials is this insert suitable for? The ADGT10T3PER-G77 WSP45G insert is suitable for machining steel, stainless steel and heat-resistant superalloys, reflecting its P / M / S designation and the wear-resistant Tiger·tec Gold coating. What benefit does the G77 chipbreaker provide? The G77 chipbreaker promotes consistent chip formation and evacuation, which reduces vibration and improves surface finish during medium to heavy milling operations. How does the parallelogram 85° shape affect machining? The parallelogram 85° geometry offers a positive engagement angle and secure clamping, helping to control cutting forces and improve repeatability in series production. Is the insert suitable for roughing and finishing? The combination of a tough coated carbide grade and controlled chip formation makes the insert suitable for higher material removal rates and stable finishes; process parameters determine whether roughing or finishing is optimal. What does the Tiger·tec Gold coating achieve? The Tiger·tec Gold PVD coating enhances heat resistance and wear performance at the cutting edge, extending tool life under the thermal loads common when machining stainless steels and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADGT120404R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G grade and the proven F56 chipbreaker to ensure stable chip formation and consistent productivity across steel, stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. ADGT120404R-F56 WSP45G Fräswendeschneidplatte – Tiger·tec Gold, F56 chipbreaker | Walter Tools The ADGT120404R-F56 WSP45G is a coated carbide milling insert designed for versatile finishing and semi-finishing milling in steels, stainless steels and high-temperature alloys, optimised for stable cutting and reliable chip control Tiger·tec Gold PVD coating Universal P/M/S suitability F56 chipbreaker for reliable chips Parallelogram 85° form for accessibility Improved process reliability when machining steels and stainless steels The combination of Tiger·tec Gold coating and the WSP45G grade provides enhanced wear resistance and a stable cutting edge, which reduces unplanned interruptions in production. The insert is engineered for the thermal and mechanical conditions typical when machining steel and stainless steel, supporting consistent chip formation and predictable tool life. The coated carbide base helps dissipate heat from the cutting zone and maintain dimensional stability, resulting in fewer reworks and improved surface consistency. Controlled chip flow and edge security for difficult alloys When working with heat-resistant superalloys or titanium, the F56 chipbreaker and the PVD-coated substrate work together to limit edge build-up and to manage long, stringy chips. This chip control reduces the risk of surface damage and tool breakouts, while the 0.4 corner radius and 15° free angle contribute to edge strength and cutting stability. The result is a milling solution that balances cutting performance with the reliability required for demanding components. Practical design for flexible milling applications The Parallelogram 85° shape and the ADGT designation ensure accessibility in a range of toolholders and approaches, supporting varied toolpaths and machining strategies. The insert’s construction and grade make it suitable across the ISO groups P, M and S, offering a single, economical solution for mixed-production environments. The clear technical design supports predictable tool-change intervals and straightforward inventory planning, helping to keep machining workflows efficient and consistent. For milling challenges that demand dependable edge life and versatile material coverage, contact Metav Werkzeuge for tailored advice on the Walter Tools ADGT120404R-F56 WSP45G insert or to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADGT120404R-F56-WSP45G-WALTER Product: Fräswendeschneidplatte ADGT120404R-F56 WSP45G Brand: Walter Tools Core specifications Free angle: 15° Corner radius: 0.4 Insert size: 12 Thickness code: 04 Chipbreaker: F56 Tolerance class: G Net price: 21.924 Materials & features Coating series: Tiger·tec Gold Grade: WSP45G Plate form: Parallelogram 85° Material suitability: P / M / S Execution: T ISO designation: ADGT120404R-F56 WSP45G Material class: PVD-coated carbide FAQ Which materials can be machined with this insert? The ADGT120404R-F56 WSP45G insert is suitable for machining across ISO groups P (steel), M (stainless steel) and S (heat-resistant superalloys and titanium), delivering balanced performance for mixed-material production. What advantage does the Tiger·tec Gold grade provide? Tiger·tec Gold in the WSP45G grade offers enhanced wear resistance and edge stability for extended tool life when the ADGT120404R-F56 WSP45G insert is used in demanding milling operations. How does the F56 chipbreaker affect operation? The F56 chipbreaker provides controlled chip segmentation and evacuation, reducing the risk of build-up and improving surface integrity during milling with the ADGT120404R-F56 WSP45G insert. Is this insert suitable for finishing and semi-finishing? Yes, the design and grade of the ADGT120404R-F56 WSP45G make it appropriate for both finishing and semi-finishing applications, delivering consistent surface quality and dimensional stability. Can this insert be used in standard ADGT toolholders? The ADGT120404R-F56 WSP45G follows common ADGT geometries and the parallelogram form is compatible with toolholders designed for this insert family, facilitating straightforward integration into existing tool sets. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT120416R-D67 WSP45G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold PVD coating and the WSP45G grade delivers extended tool life and consistent chip control in demanding milling operations; the parallelogram 85° geometry with a 1.6 mm corner radius provides stable cutting and predictable surface quality. Order the insert via Metav Werkzeuge or request technical guidance from the Metav team for process optimisation. ADGT120416R-D67 WSP45G – Milling indexable insert, Tiger‑tec Gold, Parallelogram 85° (Walter Tools) The ADGT120416R-D67 WSP45G is a parallelogram milling insert engineered for versatile face and shoulder milling of Stahl, rostfreier Stahl and high‑temperature alloys. Tiger‑tec Gold coating for extended flank life Parallelogram 85° form for positive lead angles 1.6 mm corner radius for stable cutting edge WSP45G grade for Stahl, rostfreier Stahl and S alloys Durable coating technology for longer tool life and process stability The Tiger‑tec Gold coating, combined with the WSP45G carbide grade, is designed to resist wear under the thermal and mechanical stresses typical of milling. The PVD multilayer system reduces flank wear and improves resistance to built‑up edge, which translates into longer intervals between indexings and a more reliable production flow. For operations where repeatability and predictable tool change cycles matter, this insert provides quantifiable gains in uptime and component consistency. Geometry that improves chip formation and reduces cutting forces The parallelogram 85° form and the 15° relief angle promote a positive cutting geometry that supports secure chip evacuation and reduced cutting forces. The 1.6 mm corner radius combines edge strength with the capacity to produce a consistent surface finish on shoulder and ramp milling. The insert’s profile and the D67 chipbreaker work together to shape chips for safer evacuation, lowering the risk of re-cutting and improving tool life under variable cutting conditions. Broad material suitability streamlines tooling choices Marked for P/M/S, the insert covers a wide materials spectrum in line with ISO 513: P for carbon and alloy steels, M for rostfreier Stahl and S for heat‑resistant superalloys and titanium. The WSP45G composition is optimised to manage the specific thermal and tribological demands of these groups, helping to avoid premature edge failure when switching between materials. This versatility reduces the number of special‑purpose grades required in a mixed‑material production environment, simplifying inventory and selection. Practical application benefits and process reliability With a compact plate size and a robust chipbreaker, the insert supports both roughing and finishing passes depending on parameter selection. Stable cutting edges and controlled wear behaviour contribute to consistent dimensional results and improved surface integrity, particularly on interrupted cuts and complex tool paths. The design minimises downtime for index changes and supports efficient machining cycles, making it suitable for batch production as well as flexible jobbing environments. For tailored recommendations on Walter Tools Tiger‑tec Gold inserts and to secure ADGT120416R‑D67 WSP45G for upcoming milling tasks, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and ordering assistance Technical data Article number: ADGT120416R-D67-WSP45G-WALTER Designation: ADGT120416R-D67 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core measurements Insert size: 12 mm Thickness code: 04 Corner radius: 1.6 mm Relief angle: 15° Tolerance class: G Special features Grade: WSP45G Series: Tiger‑tec Gold Chipbreaker: D67 Form: Parallelogram 85° Applicable materials: P / M / S Execution: T ISO designation: ADGT120416R-D67 WSP45G FAQ What materials can this insert machine effectively? The ADGT120416R‑D67 WSP45G insert is specified for P / M / S applications, covering Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating on the WSP45G grade reduces flank wear and built‑up edge, enhancing tool life and process stability in demanding milling operations. Is the insert suitable for shoulder and face milling? Yes, the parallelogram 85° geometry and the 1.6 mm corner radius make this insert suitable for both shoulder and face milling tasks where controlled cutting forces and chip flow are required. Which chipbreaker does the insert use and what is its benefit? The insert is equipped with the D67 chipbreaker, designed to form and control chips for safer evacuation and consistent surface quality during milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT120430R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile P/M/S material capability and precise chip control for consistent, high‑productivity milling. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. ADGT120430R-F56 WSP45G milling indexable insert — Tiger·tec Gold, P/M/S application, Walter Tools The ADGT120430R-F56 WSP45G is a Tiger·tec Gold PVD‑coated milling insert designed for versatile face and profile milling across steel, rostfreier Stahl and heat‑resistant alloys Tiger·tec Gold PVD coating Suitable for steel, rostfreier Stahl and superalloys Parallelogram 85° geometry F56 chipbreaker for stable chips Longer tool life through Tiger·tec Gold coating The Tiger·tec Gold PVD‑coated substrate combines a wear‑resistant surface with a tough cemented carbide core to deliver prolonged service life and consistent cutting behaviour. This coating technology reduces flank wear and supports a stable cutting edge under intermittent and continuous milling loads, which translates directly into fewer tool changes and higher machine uptime. The result is a measurable productivity advantage and improved process reliability for series production. Broad material range and secure chip formation Marked for P/M/S application, the insert is optimised for conventional steels (P), rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The designation indicates material‑specific tuning of the grade and coating to manage heat, adhesion and chip flow. The integrated F56 chipbreaker promotes controlled chip segmentation and evacuation, lowering rework risk and improving surface finish on each pass. This makes the insert a solid choice where mixed‑material machining is common. Geometry engineered for stable milling and repeatable results The parallelogram 85° layout, together with a 15° clearance angle and a corner radius 3, offers a balanced mix of strength and accessibility for shoulder and light profiling operations. The plate thickness (04) and the specific geometry ensure dependable edge support, while the parallelogram form helps to maintain a favourable entry angle, reducing vibration in interrupted cuts. Together, these features support repeatable dimensional accuracy and reliable surface quality in demanding production environments. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and secure the ADGT120430R-F56 WSP45G for productive, process‑secure milling operations Technical data Article number: ADGT120430R-F56-WSP45G-WALTER SKU: ADGT120430R-F56-WSP45G-WALTER Designation: ADGT120430R-F56 WSP45G Series: Tiger-tec Gold Grade / Sort: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 3 Plate form: Parallelogramm 85° Plate size: 12 Plate thickness: 04 Chipbreaker: F56 Tolerance class: G Special features Coating: PVD‑coated cemented carbide Material applicability: P / M / S Intended use: versatile milling applications Execution: T FAQ What workpiece materials is this insert suitable for? The ADGT120430R-F56 WSP45G is developed for P/M/S groups: Steel, rostfreier Stahl and heat‑resistant superalloys/titanium, offering versatile performance across these materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold provides enhanced wear resistance and thermal stability; the coating on the Walter Tools insert supports longer edge life and consistent surface quality under varying cutting conditions. What milling operations benefit most from this geometry? The parallelogram 85° geometry with a 15° clearance and the F56 chipbreaker is particularly effective for shoulder milling, light profiling and applications requiring stable chip control. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned only for explanation. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
ADGT120440R-F56 WSP45G T Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold durability and the WSP45G grade’s controlled chip formation to maintain consistent productivity in demanding milling operations; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. ADGT120440R-F56 WSP45G milling insert (Tiger·tec Gold) by Walter Tools — PVD-coated carbide, 15° free angle ADGT120440R-F56 WSP45G is a PVD-coated carbide milling insert designed for productive face and shoulder milling across Stahl, rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold PVD-coated carbide for durability Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 15° free angle Corner radius 4 mm for stable cutting edge F56 chipbreaker for controlled chip formation Longer tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a marked improvement in edge stability and wear resistance. This PVD-coated carbide formulation is engineered to withstand the thermal and mechanical loads typical of milling Stahl and rostfreier Stahl, which helps extend the interval between regrinds and tool changes. As a result, setups remain productive for longer and machine uptime is increased, supporting predictable cycle times in production environments. Reliable chip control for safer, faster machining The integrated F56 chipbreaker geometry provides consistent chip segmentation and evacuation, reducing the risk of built-up edge and workpiece damage. Controlled chip formation lowers the likelihood of interruptions and tool damage during shoulder and face milling, which in turn improves surface quality and reduces the need for secondary finishing. The direct benefit is more efficient machining cycles and fewer rejects in daily production. Geometry engineered for secure engagement and dimensional stability The Parallelogram 85° shape combined with a 15° free angle and a corner radius 4 mm produces a robust cutting profile that resists chipping under intermittent cuts and heavy radial engagement. This geometry supports secure clamping in suitable toolholders and maintains repeatable results across runs, which is particularly important when components must meet tight tolerances. The result is dependable component quality and reduced inspection overhead. Versatility across demanding materials and applications Designed for applications in P, M and S material groups, this insert performs in a wide range of situations: conventional Stahl, tough rostfreier Stahl and heat-resistant superalloys or titanium alloys. The grade’s balanced toughness and wear resistance enable secure machining where thermal loads and chemical affinity can otherwise shorten tool life. For production shops processing mixed batches, the insert offers flexibility without sacrificing stability. For machining tasks that demand a durable, versatile insert, choose Walter Tools’ Tiger·tec Gold ADGT120440R-F56 WSP45G and contact Metav Werkzeuge for application matching and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number / SKU: ADGT120440R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT120440R-F56 WSP45G Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Free angle: 15° Corner radius: 4 mm Plate size: 12 Thickness code: 04 Tolerance class: G Special features Form: Parallelogram 85° Chipbreaker: F56 Coating / type: Tiger·tec Gold (PVD-coated carbide) Applicable for: Stahl, rostfreier Stahl, superalloys and titanium Execution: T FAQ What materials can this insert machine reliably? The ADGT120440R-F56 WSP45G grade is specified for machining P, M and S groups — that is Stahl, rostfreier Stahl and heat-resistant superalloys/titanium — making it suitable for a broad range of milling tasks. How does the F56 chipbreaker affect machining performance? The F56 chipbreaker on this Walter Tools insert controls chip size and evacuation, improving surface finish and reducing the risk of built-up edge during continuous or interrupted milling. What advantage does the Parallelogram 85° form provide? The parallelogram geometry with an 85° orientation and a 15° free angle offers a stable cutting edge and secure engagement, which supports repeatable dimensions and longer edge life under varying cutting conditions. Is this insert suitable for heavy engagement and roughing? With a corner radius of 4 mm and the toughness of the WSP45G grade, the insert is designed to tolerate higher radial loads; however, toolholder selection and process parameters should be matched to the application for optimal results. Which series and coating technology does the insert use? The insert belongs to the Tiger·tec Gold series and features a PVD-coated carbide construction, combining wear resistance and edge stability for demanding milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. The offered article is an original factory-new product of the manufacturer.
ADGT1204PER-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for stable chip formation and extended tool life; the parallelogram 85° geometry with 15° relief ensures secure seating and reliable cutting in steel and cast iron. Order this insert directly via Metav Werkzeuge or consult our specialists for process optimisation. ADGT1204PER-D51 WKP25S — Walter Tools milling insert, Tiger‑tec Silver, for steel and cast iron, 15° relief The ADGT1204PER-D51 WKP25S is a coated carbide milling insert designed for productive machining of steel and cast iron, offering a robust chip control geometry for reliable, repeatable results in serial production. Tiger‑tec Silver coating for extended tool life WKP25S grade optimised for steel and cast iron Parallelogram 85° insert with 15° relief D51 chipbreaker for consistent chip control Consistent performance under continuous cutting conditions The combination of Tiger‑tec Silver coating and the WKP25S grade delivers measurable improvements in wear resistance and process stability. Designed for the thermal and mechanical challenges of machining steel and cast iron, this insert maintains cutting-edge integrity over longer tool life cycles, which reduces downtime and tool changes. The coated carbide substrate supports higher cutting intensities while the surface treatment minimises adhesive and abrasive wear for consistent results. Geometry that secures accuracy and repeatability The parallelogram 85° plate form and 15° relief result in an insert that seats securely in the cutter body and provides a predictable cutting angle for stable engagement. The specific shape lowers cutting forces in lateral milling and helps maintain dimensional accuracy across multiple passes. As a result, users benefit from reduced vibration, improved surface quality and fewer rejected parts in batch production. Reliable chip control for uninterrupted throughput Equipped with the D51 chipbreaker, the insert shapes and breaks chips efficiently when machining both steel and cast iron. Controlled chip formation reduces the risk of chip entanglement and tool damage, facilitating uninterrupted feed rates and safer handling at the machine. The improved chip flow also contributes to consistent surface finish and less manual intervention between cycles. Process-oriented grade and coating for diverse applications The WKP25S grade belongs to a coated carbide family tuned for the ISO groups P and K, which correspond to steel and cast iron. This makes the insert a versatile choice for mixed production shops that require a single, reliable grade across different workpiece materials. The Tiger‑tec Silver technology combines coating adhesion and optimized topography to improve thermal resistance and reduce crater wear during continuous milling. For production-focused milling processes trust Walter Tools’ ADGT1204PER-D51 WKP25S — contact Metav Werkzeuge for application advice or to discuss integration into existing tool setups Technical data Article number: ADGT1204PER-D51-WKP25S-WALTER Name: ADGT1204PER-D51 WKP25S Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Facts Relief angle: 15° Inscribed circle / size code: 12 Thickness code: 04 Tolerance class: G Chipbreaker: D51 Plate form: Parallelogram 85° Execution: T Special features Coating: Tiger‑tec Silver Substrate / material group: coated carbide Suitable for: Steel (P) Suitable for: Cast iron (K) Series description: WKP25S — coated carbide grade optimised for steel and cast iron FAQ What materials can be machined with this insert? The ADGT1204PER-D51 WKP25S is suitable for machining steel (ISO group P) and cast iron (ISO group K) thanks to the WKP25S grade and Tiger‑tec Silver coating. How does the D51 chipbreaker improve productivity? The D51 chipbreaker on the ADGT1204PER-D51 WKP25S produces short, controlled chips that reduce chip interference and support continuous machining at consistent feed rates. Is this insert part of a recognised coating series? Yes, the insert is part of the Tiger‑tec Silver series, which enhances wear resistance and process stability under demanding cutting conditions. Which cutter holders fit the parallelogram 85° shape? Cutter bodies that accept ADGT‑style parallelogram inserts with an 85° form and matching size code 12 are compatible with this insert. What operational benefits does the 15° relief provide? The 15° relief reduces rubbing and cutting forces in side engagement, improving surface finish and lowering the risk of built-up edge during milling of steel and cast iron. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADGT1204PER-D51 WKP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, WKP35G coated carbide grade and the parallelogram 85° geometry provides high wear resistance, reliable chip control and stable cutting performance; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. ADGT1204PER-D51 WKP35G — milling insert for steel and cast iron (Walter Tools) ADGT1204PER-D51 WKP35G is a precision milling insert designed for productive machining of steel and cast iron, featuring Tiger·tec Gold coating and a D51 chipbreaker for consistent material removal Tiger·tec Gold coated for long tool life Coated carbide grade WKP35G Parallelogram 85° form for secure mounting 15° clearance for stable cutting engagement Maximise throughput with durable Tiger·tec Gold technology The Tiger·tec Gold technology and the WKP35G grade provide a balanced combination of wear resistance and toughness that is engineered for continuous production. This coating system reduces flank and crater wear under typical cutting conditions for both steel and cast iron, extending tool life and lowering tooling cost per component. The result is improved uptime and more predictable tool-change intervals, which supports higher machine utilisation and consistent output quality. Consistent chip control and surface quality for mixed materials The integrated D51 chipbreaker is tuned to produce short, manageable chips when machining ISO group P (steel) and K (cast iron). Controlled chip formation reduces the risk of re-cutting and surface damage, helping to maintain a stable process across varying batch sizes and component geometries. For workshop planners and production engineers this means fewer interruptions for chip clearing and a more reliable path to achieving target surface finishes. Geometry and tolerance for repeatable clamping and accuracy The parallelogram 85° insert form and 15° clearance angle combine to offer secure seating and predictable engagement in common milling cutter bodies. The tolerance class G and the insert thickness designation ensure interchangeability and stable cutting conditions when replacing inserts in indexable milling heads. These geometric attributes translate into consistent tool overhang, reduced vibration and repeatable part accuracy—key factors when moving from prototype to series production. Contact Metav Werkzeuge for tailored application advice on the ADGT1204PER-D51 WKP35G by Walter Tools and to confirm suitability for specific machining tasks — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: ADGT1204PER-D51-WKP35G-WALTER Item designation: Milling insert ADGT1204PER-D51 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Facts Insert size: 12 Thickness designation: 04 Clearance angle: 15° Insert form angle: Parallelogram 85° Chipbreaker: D51 Tolerance class: G Execution: T Special features Coated carbide (WKP35G) Suitable for steel (P) and cast iron (K) Tiger·tec Gold coating technology Parallelogram insert geometry Designed for stable chip control and wear resistance FAQ What materials is this insert suitable for? The ADGT1204PER-D51 WKP35G is specified for ISO group P (steel) and K (cast iron); the WKP35G grade and Tiger·tec Gold coating are optimised for these materials. How does the D51 chipbreaker affect machining? The D51 chipbreaker promotes short, controllable chips in both steel and cast iron, improving surface finish consistency and reducing interruptions for chip management during production. Is the geometry suitable for heavy-duty milling operations? The parallelogram 85° form combined with a 15° clearance angle provides secure seating and stable engagement, supporting repeatable performance in demanding milling tasks. Can the insert be used for finishing cuts? Yes—its coated carbide grade and chip control capability make the insert suited to applications where surface quality and dimensional repeatability are required. What does the Tiger·tec Gold coating deliver in daily use? Tiger·tec Gold enhances wear resistance and thermal stability, which helps to extend tool life and maintain cutting-edge integrity over longer production runs. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are used for explanation only and remain the property of their respective owners. The offered item is original, brand-new factory stock of the manufacturer.
ADGT1204PER-D51 WKP35S Wendeplatten - Walter Tools
High wear resistance and reliable chip control from the WKP35S grade together secure productive milling of steel and cast iron; benefit from the Tiger·tec Silver technology and D51 chipbreaker for extended tool life. Order the ADGT1204PER-D51 WKP35S directly via Metav Werkzeuge or consult the Metav team for application advice. ADGT1204PER-D51 WKP35S milling indexable insert — Tiger·tec Silver, for steel and cast iron (Walter Tools) The ADGT1204PER-D51 WKP35S is an indexable milling insert engineered for high-productivity roughing and semi-finishing in steel (P) and cast iron (K), offering a robust geometry for demanding milling operations. Tiger·tec Silver coating for extended tool life Designed for steel (P) and cast iron (K) Parallelogram 85° geometry for stable milling 15° relief angle with D51 chipbreaker Consistent productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade provides a marked increase in wear resistance and thermal stability during high-load milling. Coated cemented carbide reduces flank and crater wear under typical steel cutting temperatures, which translates into fewer tool changes and higher machine uptime. The grade is specifically tailored for the ISO groups P and K, ensuring controlled performance when machining both unalloyed or alloyed steel and abrasive cast iron, with improved resistance to the heat and abrasion common in such tasks. Geometry and chip control that improve machining reliability The parallelogram 85° plate shape and the D51 chipbreaker deliver stable cutting engagement and consistent chip formation. The insert's geometry reduces radial cutting forces and enhances seat stability in the cutter body, which is particularly advantageous for interrupted cuts and variable depths of cut. The 15° relief angle aids smooth entry and exit of the tool, while the chipbreaker design supports short, controllable chips that lower the risk of recutting and reduce vibration—factors that contribute to improved surface quality and predictable cycle times. Practical benefits for production workflows and tool management Using the ADGT1204PER-D51 series supports leaner tool inventories and predictable process windows. The coated grade and robust chip control help extend tool life, reducing the number of indexings required per job and lowering overall tooling costs. For process engineers, the insert offers reliable repeatability when paired with matching cutter bodies, making it suitable for batch production and mixed-series manufacturing where consistent outcomes are a priority. The insert’s tolerance class G signals precision manufacturing that facilitates secure seating and repeatable performance. Application advice and selection guidance Selection of the ADGT1204PER-D51 WKP35S is recommended where high material removal rates are required in steel and cast iron, and where a balance between tool life and surface integrity is desired. When setting cutting parameters, consider the Tiger·tec Silver coating’s strength at elevated temperatures: moderate to higher cutting speeds with controlled feed per tooth achieve the best compromise between productivity and wear. For cast iron, the chipbreaker performs well with typical brittle chip forms; for steels, monitoring temperature and chip flow will prolong effective tool life. Contact Metav Werkzeuge for tailored cutting data and availability of the Walter Tools ADGT1204PER-D51 WKP35S; Metav Werkzeuge can provide application-specific recommendations and delivery information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADGT1204PER-D51-WKP35S-WALTER Label: Fräswendeschneidplatte ADGT1204PER-D51 WKP35S Walter Tools Manufacturer: Walter Tools Core data Free angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: D51 Material suitability: steel (P) and cast iron (K) Execution: T ISO designation: ADGT1204PER-D51 WKP35S FAQ What materials is this insert suitable for? The ADGT1204PER-D51 WKP35S is optimised for steel (ISO group P) and cast iron (ISO group K); the Tiger·tec Silver grade offers wear resistance for both material families. How does the D51 chipbreaker influence machining? The D51 chipbreaker promotes short, controlled chips and improves chip evacuation, which reduces vibration and helps maintain consistent surface quality when using the ADGT1204PER-D51 insert. Which features contribute to longer tool life? The Tiger·tec Silver coating combined with the WKP35S grade increases thermal and abrasive wear resistance, extending tool life under higher cutting speeds and demanding conditions. Is the insert suitable for interrupted cuts? Yes; the parallelogram 85° geometry and the insert’s robust chip control provide stability and secure seat engagement for interrupted milling operations. What designation should be used when ordering spare inserts? Order using the ISO designation ADGT1204PER-D51 WKP35S and reference the Walter Tools brand to ensure correct matching to cutter bodies and tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and brand names are the property of their respective owners and are used here for description only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
ADGT1204PER-D51 WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold durability, a 15° clearance angle and a parallelogram 85° geometry ensures reliable chip control and extended edge life; benefit from consistent performance across steel, stainless steel and high-temperature alloys. Order the ADGT1204PER-D51 WSP45G directly via Metav Werkzeuge or consult the product specialists for application advice. ADGT1204PER-D51 WSP45G milling insert — Parallelogram 85°, 15° clearance — Walter Tools A robust ADGT1204PER-D51 WSP45G milling indexable insert designed for versatile milling of steel, stainless steel and heat‑resistant alloys, combining Tiger·tec Gold surface technology with a parallelogram cutting geometry. Tiger·tec Gold PVD coating Versatile P/M/S material range Parallelogram 85° geometry 15° clearance angle for stable cutting Stable cutting and predictable chip formation with Tiger·tec Gold The Tiger·tec Gold coating delivers a balance of wear resistance and toughness that supports longer tool life under varying cutting conditions. This PVD-coated grade is engineered for milling operations where intermittent cuts and varying material hardness can otherwise cause edge chipping. The result is stable chip control and fewer unplanned tool changes, which translates into more predictable production cycles and improved process efficiency. Geometry engineered for milling accuracy and tool life The parallelogram 85° shape together with the 15° clearance angle provides a favourable approach to the workpiece that reduces cutting forces on the edge. This geometry improves surface finish and minimises vibration in shoulder and slot milling. The combination of insert form and chipbreaker D51 supports consistent chip evacuation and helps to maintain a secure cutting edge under moderate to demanding feeds. Broad material capability for mixed production runs Specified for materials P / M / S, the grade is suitable for unalloyed and alloyed steel, stainless steel, and heat‑resistant superalloys / titanium. The composition of the cutting grade is optimised to handle the thermal and mechanical stresses associated with these families of materials, enabling flexible scheduling of mixed batches without constant tool changes. This versatility benefits job shops and production lines that require a single insert type across several workpiece groups. Practical advantages for workshop integration With a tolerance class G and an insert thickness coded 04, the component is straightforward to index and replace within existing toolholders that accept the ADGT form factor. The WSP45G sort offers a compromise between edge robustness and regrindability suitable for many milling tasks. Specification-conscious engineers will appreciate the clear material mapping and the predictable behaviour of the grade when setting process parameters and calculating tool life. Contact Metav Werkzeuge for tailored recommendations on machining parameters and holder compatibility — Metav Werkzeuge is available for application consultations and can advise on optimal cutting data for the ADGT1204PER-D51 WSP45G insert Technical data Article number: ADGT1204PER-D51-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT1204PER-D51 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADGT1204PER-D51 WSP45G Designation without grade: ADGT1204PER-D51 Execution: T Tolerance class: G Facts Free angle: 15° Plate form: Parallelogramm 85° Plate size: 12 Plate thickness: 04 Chipbreaker: D51 Material groups (machinable): P / M / S Special features Tiger·tec Gold PVD-coated carbide grade Designed for steel, stainless steel and superalloys/titanium Robust chip control for intermittent and continuous milling Balanced wear resistance and edge toughness Suitable for mixed production runs and job shop flexibility FAQ What materials is this insert suitable for? The ADGT1204PER-D51 WSP45G insert is specified for material groups P / M / S — suitable for steel, stainless steel and heat‑resistant superalloys/titanium. Which coating technology does the grade use? The WSP45G grade is part of the Tiger·tec Gold series and features a PVD coating designed to combine wear resistance with edge strength for milling. How does the parallelogram 85° geometry affect machining? The parallelogram 85° geometry on the ADGT1204PER-D51 promotes improved cutting stability and surface finish, particularly in shoulder and slot milling applications. Is the insert compatible with standard ADGT toolholders? The insert follows the ADGT1204 form factor and can be used in holders designed for that insert style; consult holder specifications for seat and clamping details. What is the function of the D51 chipbreaker? Chipbreaker D51 supports controlled chip formation and evacuation under typical milling feeds, aiding consistent edge life and reliable process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADGT1204PER-D56 WKP25S Wendeplatten - Walter Tools
High-strength coated carbide grade and optimised chip control deliver consistent performance and long tool life; the robust geometry and tight tolerance reduce set-up time for reliable production. Order the insert directly via Metav Werkzeuge or consult Metav’s specialists for application advice. ADGT1204PER-D56 WKP25S indexable milling insert — Walter Tools — Tiger·tec Silver, D56 chipbreaker The ADGT1204PER-D56 WKP25S is a parallelogram indexable milling insert designed for productive machining of steel and cast iron in general milling applications. Tiger·tec Silver coated carbide grade WKP25S Optimised D56 chipbreaker for consistent chips Parallelogram 85° geometry for secure seating Suited for steel (P) and cast iron (K) machining Performance tailored for steel and cast iron machining The insert combines the Tiger·tec Silver coating technology with the WKP25S grade to provide high thermal stability and wear resistance during medium to high cutting speeds. The coated carbide cutting edge is configured to manage the heat generation typical of steel machining while also resisting the abrasive action encountered with cast iron. The integrated D56 chipbreaker secures controlled chip formation, which reduces the risk of built-up edge and supports uninterrupted material removal. These characteristics translate to measurable gains in process stability and fewer unplanned tool changes. Geometry and tolerances that speed up production A parallelogram seating with an 85° angle and a 15° free angle gives the insert a reliable clamping position and favourable cutting forces, enabling consistent cutting performance across batch runs. The plate thickness 04 and size 12 are matched to common cutter bodies for straightforward interchangeability, while tolerance class G ensures repeatable positioning in tool holders. This combination reduces setup time and minimises downtime during insert indexation, helping maintain higher machine uptime and predictable component quality. Durable grade and brand-backed reliability Manufactured to Walter Tools’ standards, the grade WKP25S is a coated carbide solution optimised for long life under industrial conditions. The series delivers good edge stability and wide material coverage, making it suitable for a variety of milling tasks where both productivity and surface quality matter. Used in stable cutting regimes, the insert supports extended intervals between replacements and contributes to lower tooling cost per part. For operations seeking consistent results and proven tool performance, this solution represents a practical choice. Contact Metav Werkzeuge for availability and tailored recommendations — request details for the Walter Tools ADGT1204PER-D56 WKP25S insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADGT1204PER-D56-WKP25S-WALTER Designation: ADGT1204PER-D56 WKP25S Manufacturer: Walter Tools Facts Plate size: 12 Thickness: 04 Free angle: 15° Geometry angle: Parallelogram 85° Tolerance class: G Special features Series: Tiger-tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D56 Material suitability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suitable for? The ADGT1204PER-D56 WKP25S insert from Walter Tools is specified for steel (P) and cast iron (K) applications, with the WKP25S grade optimised for those material groups. How does the D56 chipbreaker improve machining? The D56 chipbreaker on this indexable plate promotes controlled chip fragmentation and evacuation, helping maintain consistent cutting forces and surface finish when machining steels and cast irons. Can the insert be used in standard parallelogram cutter bodies? Yes, the parallelogram 85° form and tolerance class G of the insert are intended for secure seating in commonly used cutter bodies that accept this geometry. What advantage does the Tiger·tec Silver series provide? The Tiger·tec Silver technology used in the WKP25S grade offers enhanced thermal wear resistance and stable edge retention, supporting longer tool life and steady performance in production environments. Is the ADGT1204PER-D56 WKP25S suitable for high-speed cutting? The coated carbide grade and chip control features of this Walter Tools insert accommodate medium to higher cutting speeds typical for efficient steel and cast iron milling, balancing productivity and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original factory-new product of the manufacturer.
ADGT1204PER-D56 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKP35S carbide grade and a stable parallelogram geometry to achieve consistent material removal in steel and cast iron; order the insert directly via Metav Werkzeuge or consult their specialists for application-specific advice. ADGT1204PER-D56 WKP35S indexable milling insert by Walter Tools — Tiger·tec Silver coated, for steel and cast iron, parallelogram 85° geometry ADGT1204PER-D56 WKP35S is a precision indexable milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating for wear resistance WKP35S grade for reliable edge life Parallelogram 85° geometry for stable cutting 15° clearance angle for controlled engagement Durable coating and grade for higher tool life The combination of the Tiger·tec Silver coating and the WKP35S coated carbide grade provides a balance of wear resistance and thermal stability that supports longer service intervals. This coating technology is engineered for abrasive and adhesive wear modes commonly encountered when machining steel and cast iron, so the user benefits from fewer interruptions for tool changes and more predictable performance. The result is improved process economy through reduced tooling costs per component and steadier surface finish quality. Geometry and chip control that stabilise machining A parallelogram 85° insert form, paired with the D56 chipbreaker, helps maintain secure insert seating and effective chip formation during side milling operations. The 15° clearance angle reduces contact on the flank face and contributes to consistent cutting forces, which supports vibration damping and repeatable dimensional results on workpieces. Clear chip control and stable cutting geometry minimise rework and support higher material-removal rates without sacrificing component integrity. Application focus and production benefits Designed for the machining of materials in ISO groups P (steel) and K (cast iron), this insert is suited to mixed-production environments where tool versatility is valued. Its tolerance class G and standardised plate thickness ensure compatibility with common milling cutters and toolholders, easing programme planning and set-up. By choosing a grade and geometry tailored to these material groups, manufacturers achieve reliable surface finish and cycle-time consistency, helping to meet delivery schedules and quality targets. For tailored machining recommendations and prompt supply of the ADGT1204PER-D56 WKP35S indexable milling insert, contact Metav Werkzeuge quoting the SKU ADGT1204PER-D56-WKP35S-WALTER Technical data Article number: ADGT1204PER-D56-WKP35S-WALTER Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Core specifications Insert size: 12 Thickness: 04 Clearance angle: 15° Geometry: Parallelogram 85° Chipbreaker: D56 Tolerance class: G Special features Coated carbide (Tiger·tec Silver) Suitable for Steel (P) and Cast iron (K) Execution: T Designation without grade: ADGT1204PER-D56 FAQ What materials is this insert intended for? The ADGT1204PER-D56 WKP35S indexable milling insert by Walter Tools is intended primarily for steel (ISO P) and cast iron (ISO K) applications, reflecting the grade and coating design. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive and adhesive wear, allowing the insert to maintain cutting performance longer under the thermal and mechanical loads typical of steel and cast iron machining. Which geometry suits heavy side milling with this insert? The parallelogram 85° form combined with the D56 chipbreaker promotes stable seating and controlled chip formation, making the insert suitable for reliable side milling operations. Is this insert compatible with standard cutter bodies? Yes — the insert follows standard dimensions and tolerance class G, so it is compatible with common milling cutter bodies designed for this insert shape and size, using the designation ADGT1204PER-D56. Can this grade handle interrupted cuts in cast iron? The WKP35S grade, designed for cast iron as well as steel, provides robust cutting-edge behaviour that supports typical interrupted cutting scenarios found in cast iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1204PER-D56 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the versatile WSP45G grade and the D56 chipbreaker for consistent, reproducible milling results. Order the ADGT1204PER-D56 WSP45G milling insert directly via Metav Werkzeuge or consult the Metav team for tailored application advice. ADGT1204PER-D56 WSP45G milling insert — Tiger·tec Gold, Parallelogram 85° | Walter Tools A ADGT1204PER-D56 WSP45G milling insert designed for versatile face and peripheral milling of steel, stainless steels and heat‑resistant superalloys. Tiger·tec Gold PVD-coated grade WSP45G Designed for steel, stainless and superalloys Parallelogram 85° form with 15° free angle Chipbreaker D56 for stable chip control Boosted productivity across mixed-material production The ADGT1204PER-D56 WSP45G insert combines the Tiger·tec Gold coating with a tough, PVD-coated carbide grade to deliver extended tool life and stable cutting behaviour across the ISO groups P / M / S. The grade WSP45G is formulated for the thermal and mechanical loads encountered when machining unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys or titanium. This versatility reduces tool change frequency and simplifies stockkeeping, creating measurable improvements in process efficiency and uptime. Reliable chip control and consistent surface finish The chipbreaker D56 is engineered to produce predictable chip forms and minimise re-cutting, which helps to protect the cutting edge and the workpiece surface. Combined with the 15° free angle and the parallelogram 85° form, the insert achieves an entering angle that balances cutting forces and surface integrity. The result is a consistent finish and repeatable dimensional results, supported by the tolerance class G that ensures interchangeability and predictable clamping in multi-insert milling heads. Practical integration for production environments With a nominal plate designation of 12 and a thickness code of 04, the insert fits common indexable milling systems and facilitates straightforward index changes. The PVD-coated construction of the WSP45G grade enhances thermal resistance and wear protection during interrupted cuts or elevated cutting speeds. Specification clarity—shape, chipbreaker and free angle—allows planners to select compatible cutters with confidence, reducing setup time and supporting continuous, process-stable machining in mixed-material production lines. Discuss machining strategies for the Tiger·tec Gold ADGT1204PER-D56 WSP45G insert with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for application-specific recommendations Technical data Article number: ADGT1204PER-D56-WSP45G-WALTER Designation: ADGT1204PER-D56 WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Material groups: P / M / S Form: Parallelogram 85° Chipbreaker: D56 Facts Free angle: 15° Plate size: 12 Thickness code: 04 Plate form angle: 85° Tolerance class: G Special features PVD-coated carbide grade Suitable for steel, stainless steels and superalloys/titanium Designed for versatile milling applications Stable chip control with D56 chipbreaker Good edge stability and reproducible performance FAQ What materials is this insert suitable for? The ADGT1204PER-D56 WSP45G insert is specified for ISO groups P, M and S — suitable for machining steels, stainless steels and heat‑resistant superalloys/titanium. What is the benefit of the D56 chipbreaker? The chipbreaker D56 on the ADGT1204PER-D56 WSP45G promotes controlled chip formation and reduces the tendency to re‑cut, improving surface quality and protecting the cutting edge. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases thermal stability and wear resistance for the WSP45G grade, extending tool life and enabling more consistent cutting where temperatures and loads are high. Which geometries ensure stable cutting forces? The parallelogram 85° form together with the 15° free angle provides an entering angle that balances cutting forces and contributes to a reliable surface finish and reduced tool load. Is the insert compatible with standard milling heads? The designation (plate size 12, thickness 04 and tolerance class G) of the ADGT1204PER-D56 WSP45G matches common indexable milling systems, allowing straightforward replacement and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanation only and does not imply any affiliation between Metav Werkzeuge and the referenced manufacturers. The offered article is an original, factory‑new product of the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com