ADGT1606PER-D67 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a stable chipformer and a precision parallelogram geometry for reliable machining of demanding alloys; order the ADGT1606PER-D67 WSM35G insert directly via Metav Werkzeuge or consult the team for application advice. ADGT1606PER-D67 WSM35G indexable milling insert, Tiger·tec Gold, Walter Tools ADGT1606PER-D67 WSM35G is an indexable milling insert designed for heavy-duty cutting of heat-resistant alloys and rostfreier Stahl, offering a coated-carbide grade and a geometry tuned for stable chip control. Tiger·tec Gold coating for thermal stability Parallelogram 85° insert form for robust cutting D67 chipformer for consistent chip evacuation Stable processing of rostfreier Stahl and superalloys for longer tool life The WSM35G grade, built on Tiger·tec Gold coating technology, is optimised for machining rostfreier Stahl and high-temperature superalloys. The coated-carbide construction improves heat resistance and reduces edge wear, which translates into fewer tool changes and steadier production runs. For shop floors facing built-up edge and thermal load, this grade supports a more predictable component quality and longer service intervals. Geometry that enhances surface finish and chip control The Parallelogram 85° form combined with the D67 chipformer and a 15° clearance produces a favourable cutting kinematics: radial engagement and chip flow are controlled to lower cutting forces and reduce vibrations. The insert’s size and thickness coding ensure a rigid seat in the cutter body, making the system suitable for demanding interrupted cuts and shoulder milling where consistent surface quality and repeatability matter. Process reliability and economical machining through a robust design With coated carbide performance and tolerance class G, the insert supports repeatable positioning and stable cutting edges under elevated thermal and mechanical loads. The material classification S / M indicates suitability for both titanium/superalloy work and rostfreier Stahl, helping to rationalise tooling across mixed-material production. The overall result is higher uptime, fewer reworks and improved cost per component in serial and job-shop environments. Contact Metav Werkzeuge for a tailored recommendation on the ADGT1606PER-D67 WSM35G insert and to arrange product delivery or technical consultation. Technical Data Article number: ADGT1606PER-D67-WSM35G-WALTER Name: ADGT1606PER-D67 WSM35G Manufacturer: Walter Tools Core specifications Insert size: 16 Thickness code: 06 Free angle: 15° Form: Parallelogram 85° Chipformer: D67 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Material suitability: S / M (superalloys / rostfreier Stahl) Execution: T FAQ What materials is this insert intended to machine? The ADGT1606PER-D67 WSM35G is specified for machining rostfreier Stahl and heat-resistant superalloys (S / M classification), offering the thermal and edge stability required for these groups. How does the D67 chipformer benefit the machining process? The D67 chipformer is designed to produce short, controllable chips and support consistent chip evacuation, improving surface finish and reducing the risk of built-up edge when machining with the WSM35G grade. What is the significance of the Parallelogram 85° form? The Parallelogram 85° geometry provides robust cutting support and favourable load distribution on the cutting edge, which helps maintain repeatable performance during heavy or interrupted milling operations. Which coating technology is used and what does it deliver? The insert uses Tiger·tec Gold coating technology, delivering enhanced heat resistance and edge stability to extend tool life when processing demanding materials. What does tolerance class G mean for production? Tolerance class G indicates precise manufacturing tolerances of the insert, facilitating consistent seating and reliable interchangeability in precision milling holders. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1606PER-D67 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and WSP45G grade for durable, versatile milling with controlled chip formation; the parallelogram 85° geometry combined with a 15° clearance supports flexible toolpaths and prolonged edge life. Order the ADGT1606PER-D67 WSP45G directly via Metav Werkzeuge or ask our consultants for application-specific recommendations. ADGT1606PER-D67 WSP45G milling indexable insert by Walter Tools — Tiger·tec Gold PVD grade for versatile milling ADGT1606PER-D67 WSP45G is a milling indexable insert optimised for medium to demanding milling tasks across a broad range of materials Tiger·tec Gold coating for wear resistance Suitable for Steel, stainless steel, Superalloys Parallelogram 85° geometry for flexible milling Longer tool life through a versatile PVD grade The WSP45G grade in the Tiger·tec Gold series combines a coated carbide substrate with a PVD top layer to deliver wear resistance and stable cutting performance. This engineered combination reduces flank wear and supports consistent edge integrity during extended runs, which in turn lowers tool change frequency and contributes to higher overall productivity. The grade is specifically balanced for the heat and strain typical of milling, making it a reliable choice for general production and mixed-shop environments. Predictable chip behaviour and surface quality Equipped with the D67 chipbreaker and a parallelogram 85° geometry, the insert enables controlled chip formation and improved evacuation in a wide range of cutting conditions. The chipbreaker design aids in breaking and directing chips away from the cut, reducing the risk of re-cutting and improving surface finish. The 15° clearance provides a favourable approach angle that helps reduce friction at the cutting edge, benefitting surface integrity and dimensional consistency on workpieces. Broad material capability for fewer tool variants Designed for application across the ISO groups P/M/S, the insert handles unalloyed and alloyed steel, stainless steel, as well as heat-resistant superalloys and titanium. This breadth of capability allows consolidation of tool inventories: one insert type can serve multiple workpiece materials, simplifying tool management and setup. The robust PVD coating and substrate pairing support machining where heat build-up and edge stress are significant, delivering repeatable performance in both semi-finishing and finishing operations. Stable geometry and tolerance for reliable mounting The parallelogram form with an 85° seat angle provides flexibility in toolholder configurations and facilitates a variety of entry angles without sacrificing clamping stability. The insert is supplied in the specified tolerance class G and a standard thickness that ensures repeatable seating and concentricity in tool bodies. These dimensional consistencies are essential for high-volume production where interchangeability and repeatable setup reduce scrap and rework. Practical advantages for production environments By combining a resilient coating system, a versatile grade and a proven chipformer, this insert supports longer tool life, fewer interruptions and consistent component quality. Shops aiming to increase machine uptime or to streamline tooling strategies will find the balance of wear resistance and chip control particularly useful. For specific cutting data recommendations or to confirm suitability for a given machine and operation, technical consultation is available to match speeds, feeds and depth of cut to the intended application. Discuss the Walter Tools ADGT1606PER-D67 WSP45G with Metav Werkzeuge for tailored cutting-data suggestions and grade selection; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADGT1606PER-D67-WSP45G-WALTER Manufacturer: Walter Tools Product type: milling indexable insert Designation: ADGT1606PER-D67 WSP45G Series: Tiger·tec Gold Facts Size: 16 Thickness: 06 Free angle: 15° Geometry: Parallelogram 85° Tolerance class: G Materials & features Coating: Tiger·tec Gold (PVD) Grade: WSP45G (coated carbide) Chipbreaker: D67 Suitable for: Steel (P), stainless steel (M), Superalloys/Titanium (S) Execution: T Wendeplatte ISO: ADGT1606PER-D67 WSP45G FAQ What materials can this insert machine effectively? The ADGT1606PER-D67 WSP45G from Walter Tools is intended for machining Steel, stainless steel and heat-resistant superalloys (ISO groups P, M, S) and is optimised to manage the typical heat and chip formation of those materials. How does the parallelogram geometry influence milling results? The parallelogram 85° configuration improves toolholder flexibility and entry-angle options, helping the ADGT1606PER-D67 WSP45G maintain stable cutting forces and improved vibration damping for better surface finish. Which chipbreaker is fitted and what is its benefit? This insert features the D67 chipbreaker, designed to produce manageable chips under a variety of cutting conditions, enhancing chip evacuation and reducing the chance of re-cutting or surface damage. Why choose Tiger·tec Gold for milling applications? The Tiger·tec Gold coating on the WSP45G grade enhances edge stability and wear resistance, which extends tool life and sustains cutting performance across mixed production demands. Is this insert suitable for both roughing and finishing? Yes; the combination of grade, chipbreaker and geometry makes the ADGT1606PER-D67 WSP45G adaptable for medium roughing and finishing strategies when cutting parameters are selected appropriately. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT1606PER-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of robust cutting-edge stability and secure chip control for predictable milling of stainless steels and superalloys; order directly via Metav Werkzeuge or request tailored advice from the technical team. ADGT1606PER-F56 WSM35G milling indexable insert — 15° relief, Parallelogram 85° (Walter Tools) The ADGT1606PER-F56 WSM35G is a coated cemented-carbide milling insert designed for heavy-duty machining of stainless steels and heat‑resistant superalloys, offering a balance of edge stability and chip control in interrupted and continuous milling operations. Tiger·tec Gold coated carbide grade WSM35G Optimised for stainless steels and superalloys Parallelogram 85° geometry with 15° relief F56 chipbreaker for controlled chip formation Consistent performance on difficult-to-machine materials The combination of the Tiger·tec Gold coating and the WSM35G grade delivers a material system engineered for the thermal and mechanical demands of stainless steels and heat‑resistant superalloys. The coated cemented‑carbide formulation promotes stable cutting edges, which reduces the tendency for built‑up edge and extends productive tool life. For process planners, this translates into fewer interruptions and a steadier manufacturing output when tackling tough alloys that typically cause rapid wear. Geometry that improves process security and surface quality The parallelogram 85° shape together with a 15° relief angle creates an advantageous cutting orientation for face and shoulder milling where radial engagement varies. The F56 chipbreaker has been developed to generate manageable chips and to avoid entanglement, supporting consistent surface finish and reducing the risk of tool chipping. With tolerance class G, dimensional repeatability is supported, making tool indexing and re‑clamping more predictable in serial production. Practical applications and who benefits This insert is intended for use in high‑duty milling operations in sectors such as aerospace, energy and specialised engineering where stainless steels and superalloys are common. Job shops and production facilities requiring reliable edge life and repeatable results will benefit from the grade’s emphasis on thermal resistance and stable chip formation. Operators and process engineers will find that the insert’s characteristics help to maintain cycle times and reduce scrap from poor chip control. Economic and operational advantages By prioritising edge stability and chip control, the insert supports higher productivity through reduced downtime for tool changes and less variability in part quality. The combination of a coated hard‑metal grade and a purpose‑built chipbreaker contributes to longer intervals between indexings and more predictable tool costs per machined component. The result is improved process security and a clearer calculation of total machining cost for demanding materials. Contact Metav Werkzeuge for application advice and procurement of Walter Tools inserts such as ADGT1606PER-F56 WSM35G, and request recommendations tailored to the specific machining task Technical Data SKU: ADGT1606PER-F56-WSM35G-WALTER Item designation: ADGT1606PER-F56 Brand: Walter Tools Product type: Fräswendeschneidplatte / milling indexable insert Series: Tiger·tec Gold Facts Insert size: 16 Thickness: 06 Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: G Special features Grade: WSM35G Coating technology: Tiger·tec Gold Material suitability: S / M (heat‑resistant superalloys, titanium; stainless steels) Execution: T FAQ What materials is the ADGT1606PER-F56 WSM35G suited for? The ADGT1606PER-F56 WSM35G is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), providing thermal stability and reliable chip formation when machining these difficult materials. Which geometry and relief does the insert provide? This insert features a parallelogram 85° plate form with a 15° relief angle, designed to offer favourable cutting engagement and improved tool life under varying radial depths of cut. How does the F56 chipbreaker benefit the machining process? The F56 chipbreaker facilitates controlled chip fragmentation and evacuation, reducing the likelihood of entanglement and enabling a more consistent surface finish and extended tool life during milling. Is this insert compatible with common milling toolholders? The ISO designation ADGT1606PER-F56 indicates standard insert geometry; the ADGT1606PER-F56 WSM35G can be used in compatible milling cutter bodies that accept this insert shape and size, observing the specified tolerance class G. For which industries is this insert particularly suitable? The combination of the WSM35G grade and the Tiger·tec Gold coating makes this insert well suited to aerospace, power generation and specialised engineering sectors where stainless steels and superalloys are frequently machined. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by the respective trademark holders. The offered item is an original, factory‑new product of the manufacturer.
ADGT1606PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a combination of Tiger‑tec Gold PVD coating, stable parallelogram geometry and a 15° relief angle for consistent, high‑productivity milling of steel, stainless steel and high‑temperature alloys; order or request application advice via Metav Werkzeuge for optimal integration into existing processes. ADGT1606PER-F56 WSP45G milling indexable insert — Tiger‑tec Gold, 15° relief, parallelogram 85° (Walter Tools) The ADGT1606PER-F56 WSP45G is a PVD‑coated milling indexable insert designed for robust face and profile milling across steels, stainless steels and heat‑resistant superalloys, offering secure chip control and long edge life. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° geometry 15° relief for cutting stability Reliable performance across demanding materials The combination of the Tiger‑tec Gold coating and the grade WSP45G creates a balance of toughness and wear resistance that is particularly advantageous when machining steel, stainless steel and superalloys/titanium. The coated cemented‑carbide substrate is formulated to resist thermal and mechanical loads typical of milling operations; this means fewer unplanned tool changes and a more predictable process rhythm. For production environments where consistent component quality and repeatability are essential, this insert provides a clear improvement in tool life and process stability compared with uncoated or older coated grades. Geometry and edge stability for secure machining The parallelogram 85° form together with a 15° relief angle supports a positive cutting approach and reliable chip evacuation, especially during interrupted cuts and shoulder milling. The insert’s shape and chipbreaker specification F56 are engineered to reduce cutting forces and to direct chips away from the cutting zone, lowering the risk of edge build‑up. This geometry benefits machining cycles that require dimensional consistency and surface quality; the result is reduced rework and a smoother downstream process, which helps maintain throughput targets in a production setting. Tiger‑tec Gold coating and application benefits The Tiger‑tec Gold surface technology is a PVD coating system optimised for milling: it improves wear resistance while maintaining the toughness necessary for variable cutting conditions. As a result, the insert copes well with the heat generation and the complex chip forms encountered when cutting P/M/S material groups (unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys). For engineers specifying tools, the benefit is twofold: enhanced process security through stable cutting edges and predictable tool behaviour under elevated temperatures, and improved surface finish on the workpiece due to controlled micro‑geometry at the cutting edge. Contact Metav Werkzeuge today to discuss how the ADGT1606PER-F56 WSP45G with Tiger‑tec Gold can improve milling productivity; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number (SKU): ADGT1606PER-F56-WSP45G-WALTER Designation: ADGT1606PER-F56 ISO designation: ADGT1606PER-F56 WSP45G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Material groups: P / M / S Numbers / core technical data Size: 16 Thickness: 06 Relief angle: 15° Plate form angle: Parallelogram 85° Tolerance class: G Designs / special features Tiger‑tec Gold PVD coating Coated cemented‑carbide insert Parallelogram 85° geometry Chipbreaker F56 for secure chip control Suited for steel, stainless steel and heat‑resistant superalloys FAQ What materials can be machined with this insert? The ADGT1606PER‑F56 WSP45G is suited to machining steels, stainless steels and heat‑resistant superalloys (P / M / S), thanks to its Tiger‑tec Gold coating and robust substrate design. Which milling applications benefit most from this geometry? Parallelogram 85° inserts with a 15° relief are especially effective for face milling and shoulder milling where chip control and edge stability during interrupted cuts are required. How does the Tiger‑tec Gold coating affect tool life? Tiger‑tec Gold provides improved wear resistance while maintaining edge toughness; this combination extends tool life and yields more consistent performance under elevated cutting temperatures. Is the chipbreaker F56 suitable for heavy cuts? The F56 specification delivers controlled chip formation for a broad range of cutting conditions, supporting stable machining in both roughing and semi‑finishing passes. Can this insert be used on titanium alloys? The product is classified for S‑group materials, which include heat‑resistant superalloys and titanium; machining parameters should be adjusted for low thermal conductivity materials to protect the cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation. The offered item is an original, factory‑new product from the manufacturer.
ADGT1606PER-G77 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold grade (WSM35G), a 15° clearance angle and the G77 chipbreaker delivers high process stability and extended tool life for demanding materials; order the inserts directly via Metav Werkzeuge or consult the technical team for application-specific cutting data. ADGT1606PER-G77 WSM35G indexable milling insert — Tiger·tec Gold, parallelogram 85°, Walter Tools The ADGT1606PER-G77 WSM35G is an indexable milling insert designed for productive machining of stainless steels and heat‑resistant superalloys in industrial milling operations. Tiger·tec Gold coated WSM35G For stainless steels and superalloys Parallelogram 85° cutting geometry 15° clearance angle for secure chip control Reliable cutting performance in hard-to-machine materials The coated carbide grade WSM35G, part of the Tiger·tec Gold series, is engineered to handle the thermal and mechanical loads associated with machining stainless steels and superalloys. The coating improves oxidation and wear resistance while the substrate provides a stable cutting edge under cyclic load, which translates into predictable component quality and fewer tool changes. Thanks to the coating and the substrate combination, the insert maintains edge integrity at elevated temperatures and supports consistent chip formation, reducing the risk of built-up edge and unexpected rework. Geometry that promotes process stability and surface quality The parallelogram 85° outline together with the 15° clearance angle and the G77 chipbreaker create a balanced cutting geometry for both interrupted and continuous cuts. The insert form disperses cutting forces and reduces vibration potential, which benefits surface finish and dimensional repeatability. In practical terms, this geometry allows higher metal removal rates with controlled chip flow, helping to keep cycle times low while maintaining a stable machining process on components made from challenging materials. Economical productivity for serial production Adopting the WSM35G grade in a standard ADGT16 platform supports cost-effective machining through longer tool life and consistent performance. Fewer indexings and longer edge life reduce downtime and tooling expenditure per part without compromising tolerances. The combination of coating technology and dedicated chip control means predictable wear behaviour, which simplifies tool management and contributes to more reliable production planning in batch and continuous manufacturing environments. Practical guidance and fitment in milling systems The insert suits common ADGT16 holders and is available in the standard ADGT1606 thickness and form, enabling straightforward integration into existing toolsets. Selection of cutting parameters should consider the workpiece alloy group (ISO group M for stainless steels and S for heat‑resistant alloys and titanium), the chosen depth of cut and engagement; the G77 chipbreaker is particularly effective where secure chip segmentation and evacuation are required. For fine finishing, adapt speeds and feed to the workpiece grade to exploit the coating’s ability to sustain edge integrity while achieving the desired surface quality. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools Tiger·tec Gold WSM35G inserts for demanding stainless and superalloy milling — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: ADGT1606PER-G77-WSM35G-WALTER Product: Indexable milling insert Manufacturer: Walter Tools ISO designation: ADGT1606PER-G77 WSM35G Facts Insert size: 16 Thickness designation: 06 Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: G Chipbreaker: G77 Special features Coating: Tiger·tec Gold (WSM35G) Substrate: Coated carbide Series: Tiger‑tec Gold Grade: WSM35G Version: T Base designation: ADGT1606PER-G77 Material application: stainless steels (ISO group M), superalloys and titanium (ISO group S) FAQ What materials is this insert intended for? The WSM35G grade is optimised for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering secure chip formation and thermal stability during milling. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold improves oxidation and abrasive wear resistance, extending edge life under high temperatures; the coating on the WSM35G grade supports consistent cutting performance in demanding materials. Which geometry features influence cutting behaviour? The parallelogram 85° outline and 15° clearance angle together with the G77 chipbreaker reduce cutting forces and promote stable chip control, which benefits surface finish and process reliability. Can the ADGT1606PER-G77 be used for both roughing and finishing? Depending on holder, cutter assembly and cutting data, the ADGT1606PER‑G77 WSM35G insert can be applied for roughing and, with adjusted parameters, for finishing in many stainless and superalloy applications. How does the G77 chipbreaker perform on interrupted cuts? The G77 chipbreaker is designed for secure chip control and performs well in interrupted and continuous milling where reliable chip formation and evacuation are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names mentioned above are the property of their respective owners. The brand names are cited for explanation and identification purposes only; there is no affiliation or partnership implied between Metav Werkzeuge and the trademark owners. The listed article is an original, factory‑new product from Walter Tools.
ADGT1606PER-G77 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high edge stability and versatile material range for consistent milling performance; the PVD-backed Tiger·tec Gold grade WSP45G ensures long tool life and reliable chip control. Order the ADGT1606PER-G77 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ADGT1606PER-G77 WSP45G indexable milling insert – Tiger·tec Gold, 15° clearance, Parallelogram 85° (Walter Tools) The ADGT1606PER-G77 WSP45G is an indexable milling insert engineered for medium to heavy milling in a wide spectrum of workpiece groups, offering a robust PVD coating and a geometry optimised for secure chip formation. Tiger·tec Gold PVD coating Grade WSP45G for tough milling Parallelogram 85° shape for versatility Suitable for Stahl, rostfrei and superalloys Consistent cutting performance across demanding materials The combination of the Tiger·tec Gold coating and the WSP45G grade ensures consistently high edge stability and predictable wear behaviour during milling operations. The PVD-backed, coated cemented carbide composition is designed to balance toughness and hardness, which reduces the tendency for premature chipping when machining challenging substrates. For workshops producing complex parts, this means fewer interruptions for insert changes and a steadier process window, leading to improved cycle-time reliability and lower total tool consumption. Geometry that improves process security and chip control The parallelogram shape with an 85° approach angle and a 15° clearance angle produces favourable cutting forces and controlled chip flow. The specific G77 chipbreaker supports stable chip formation across interrupted and continuous cuts, reducing the risk of built-up edge and helping to maintain surface finish. These geometric choices translate to more predictable tool behaviour in slotting and shoulder milling, where maintaining a steady cutting edge is essential for dimensional repeatability and part quality. Broad applicability and clear material guidance Marked for workpiece groups P / M / S, the insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys or Titan. The designation indicates the intended application range rather than the insert material itself and helps planners select the right grade for mixed-production environments. For operations that switch between alloyed steels, corrosion-resistant grades and high-temperature alloys, the insert provides a practical compromise: robust enough for heat-prone materials while retaining the toughness required for conventional steels. Practical benefits that support productivity The standardised size code and thickness simplify inventory management and regrinding decisions, while the coated surface reduces friction and thermal impact at the cutting edge. This results in longer effective tool life and fewer quality incidents caused by edge failure. The insert’s tolerance class G supports repeatable seating in indexable holders, contributing to consistent part geometry across tool changes and multi-shift operations. Contact Metav Werkzeuge today to discuss suitability of the ADGT1606PER-G77 WSP45G for specific applications or to request cutting data tailored to the process Technical Data Article number: ADGT1606PER-G77-WSP45G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Clearance angle: 15° Shape: Parallelogramm 85° Size: 16 Thickness code: 06 Tolerance class: G Special features Material suitability: P / M / S Chipbreaker: G77 Execution: T Coating/technology: Tiger·tec Gold, PVD-coated cemented carbide FAQ What materials is this insert intended for? The ADGT1606PER-G77 WSP45G insert is specified for the workpiece groups P / M / S, which covers Stahl, rostfreier Stahl and high-temperature superalloys including Titan. Which chipbreaker does the insert use and why does that matter? This insert features the G77 chipbreaker; the design supports controlled chip formation and reduced built-up edge, improving surface quality during milling. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating on the ADGT1606PER-G77 WSP45G enhances wear resistance and heat protection, extending tool life under medium to heavy milling loads. Is the insert compatible with standard indexable milling holders? The ADGT1606PER-G77 WSP45G follows common size and tolerance conventions (tolerance class G), ensuring repeatable seating in compatible indexable holders for milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original and brand new from the manufacturer (Walter Tools).
ADGT1807PER-D51 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, controlled chip formation and stable geometry to increase process reliability and reduce downtime; order the insert directly via Metav Werkzeuge or contact our consultants for matching toolholders and grade recommendations. ADGT1807PER-D51 WKP35G — Milling indexable insert (Parallelogram 85°, 15° free angle) by Walter Tools The ADGT1807PER-D51 WKP35G is a coated carbide milling insert engineered for productive machining of steel and cast iron in demanding milling operations. Tiger·tec Gold coating for high wear resistance Optimised D51 chipbreaker for consistent chips Parallelogram 85° geometry with 15° free angle Coated carbide grade WKP35G for steel and cast iron High productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade provides a robust, coated carbide solution that resists abrasive wear and thermal loading during interrupted and continuous milling. This design supports a stable cutting edge, promoting longer tool life and fewer tool changes. In practice, the coated structure is tailored to the heat and chip behaviour typical of steel and the abrasive nature of cast iron, making the insert a reliable choice where consistent removal rates and predictable tool performance matter. Geometry and chip control that stabilise the process The parallelogram 85° geometry and 15° free angle deliver a favourable cutting orientation that balances radial engagement and axial forces, improving toolholder life and surface finish stability. The D51 chipbreaker is engineered to produce short, controllable chips when machining P- and K-class materials, reducing the risk of entanglement and improving evacuation. Together these features support safer, more repeatable milling cycles and facilitate higher feed rates without compromising component quality. Practical application and economic impact Designed for use in steel (ISO group P) and cast iron (ISO group K), this insert suits a wide range of catalogue- and geometry-dependent milling tasks where abrasion resistance and edge stability are essential. By reducing wear-related downtime and enabling consistent cycle times, the insert contributes to a lower cost per manufactured part and improved plant throughput. For selection of the optimal grade, holder geometry or cutting data, Metav Werkzeuge can provide targeted recommendations to align the insert performance with specific machining strategies. Contact Metav Werkzeuge for availability and tailored cutting recommendations for the Walter Tools ADGT1807PER-D51 WKP35G milling insert — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: ADGT1807PER-D51-WKP35G-WALTER Article designation: ADGT1807PER-D51 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Core data Free angle: 15° Insert size: 18 Plate thickness: 07 Geometry: Parallelogram 85° Tolerance class: G Chipbreaker: D51 Grade: WKP35G Special features Coating: Tiger·tec Gold Material: Coated carbide (P / K) Suitable for: Steel (P) and cast iron (K) Execution: T Series: Tiger-tec Gold FAQ What materials is this insert suitable for? The ADGT1807PER-D51 WKP35G is specified for machining steel (ISO group P) and cast iron (ISO group K), matching the design goals of the WKP35G grade. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases wear resistance and heat tolerance, helping the insert maintain a sharp cutting edge longer under the thermal and abrasive conditions of milling. Which chipbreaker is fitted and what is its benefit? The insert features a D51 chipbreaker that produces short, controllable chips, which supports safer chip evacuation and more consistent surface quality. Is the geometry suitable for heavy roughing and finishing? The parallelogram 85° geometry with a 15° free angle offers a balance between rigidity and cutting orientation, making the insert versatile for both roughing and finishing strategies depending on insert engagement and cutting data. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the listed brands. The offered item is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT1807PER-D56 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold PVD coating with the robust D56 chipbreaker and a 15° clearance, this insert delivers secure chip control and extended tool life for versatile milling of Stahl, rostfreier Stahl and Titan; order the ADGT1807PER-D56 WSP45G directly via Metav Werkzeuge or consult our specialists for cutting-data optimisation. ADGT1807PER-D56 WSP45G — Milling indexable insert (Tiger·tec Gold, Parallelogram 85°) by Walter Tools ADGT1807PER-D56 WSP45G is a coated carbide milling insert designed for demanding face and shoulder milling tasks in automotive, aerospace and general engineering where reliable chip formation and edge stability are essential Tiger·tec Gold PVD coating for longer life Versatile for Stahl, rostfreier Stahl, Titan Parallelogram 85° geometry for stable milling 15° clearance with D56 chipbreaker for chip control Maximise throughput with predictable cutting performance The insert combines a Tiger·tec Gold surface treatment and a coated carbide substrate to provide consistent wear behaviour and improved tool life. The applied PVD technology enhances thermal resistance at the cutting edge, meaning higher cutting speeds and longer intervals between indexings or replacements. For production environments this translates into measurable gains in cycle time and lower tool-change frequency, supporting continuous, cost-effective machining. Reliable chip control for safer milling cycles Equipped with the D56 chipbreaker and a 15° clearance angle, the geometry promotes controlled chip segmentation and evacuation. The parallelogram 85° shape improves approach angles on shoulder and slot milling, reducing chatter and promoting stability under interrupted cuts. This design reduces the risk of built-up edge formation and makes the insert particularly effective when machining Stahl and tougher alloys, where chip management is a common productivity limiter. Broad material capability with targeted grade design The WSP45G grade is engineered for versatile use across the ISO groups P, M and S, making it suitable for Stahl, rostfreier Stahl and Titan or heat-resistant superalloys. The grade’s balanced toughness and hardness combination supports reliable cutting-edge integrity when faced with varying workpiece hardness or thermal loads. Where mixed production runs are common, a single grade that spans these groups lowers tooling complexity and streamlines inventory handling. Practical advantages for process security and setup The insert’s standard thickness and precise tolerances enable simple toolholder seating and repeatable indexability, which shortens setup time and reduces scrap risk. As part of the Tiger·tec Gold family the component benefits from a proven coating strategy that aids process security and consistent surface finish generation. For shops seeking predictable results, the insert reduces rework and contributes to an overall increase in first-pass yield. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools Tiger·tec Gold inserts — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data SKU: ADGT1807PER-D56-WSP45G-WALTER Article designation: ADGT1807PER-D56 WSP45G Series: Tiger-tec Gold Facts Clearance angle: 15° Insert size: 18 Plate thickness: 07 Tolerance class: G Special features Grade: WSP45G Chipbreaker: D56 Shape: Parallelogram 85° Substrate: coated carbide Applicable material groups: P / M / S Execution: T ISO designation: ADGT1807PER-D56 WSP45G FAQ What materials is this insert best suited for? The ADGT1807PER-D56 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and Titan, as the WSP45G grade was developed for P, M and S material groups. How does the D56 chipbreaker affect milling performance? The D56 chipbreaker on this Walter Tools insert promotes controlled chip segmentation and evacuation, improving surface finish and reducing the risk of built-up edge during continuous and interrupted cuts. Can this insert be used for high-speed milling? Thanks to the Tiger·tec Gold PVD coating and the coated carbide substrate, the insert supports elevated cutting speeds with improved thermal resistance and extended tool life. Is the geometry compatible with standard toolholders? The parallelogram 85° form and the standard thickness allow secure seating in appropriate milling cutters; always verify the toolholder’s seat specification against the insert’s ISO designation. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGX10T3PER-F56 WHH15 Wendeplatten - Walter Tools
Combining the WHH15 coated carbide grade with the F56 chipbreaker and a parallelogram 85° geometry yields a stable, repeatable cutting solution that is easy to index and maintain. Benefit from precise chip control and compact toolholder compatibility; order the insert directly via Metav Werkzeuge or ask our technical consultants for specific application guidance. Fräswendeschneidplatte ADGX10T3PER-F56 WHH15 – Parallelogram 85°, 15° clearance, Walter Tools A compact milling indexable insert for precision operations where controlled chip formation and repeatable edge performance are required Coated carbide grade WHH15 for durability Parallelogram 85° geometry for stable cutting 15° clearance angle reduces rubbing F56 chipbreaker for controlled chip flow Consistent cutting performance through engineered geometry The insert combines a parallelogram 85° shape with a 15° clearance to reduce friction and promote a stable cutting action. The interplay of geometry and the F56 chipbreaker provides controlled chip formation, which translates into fewer interruptions and more consistent cycle times. As a coated carbide solution, the grade supports repeatable edge life under standard milling conditions; users should consult the manufacturer product matrix to confirm suitability for specific workpiece materials before use. Precision, tolerance and secure seating for reliable results With tolerance class G and a compact T3 thickness, the design supports accurate seating in compatible toolholders and reduces runout risk during high-speed indexing. The chip control strategy of the insert minimises re-cutting and heat concentration at the cutting edge, contributing to stable tool life and reproducible surface quality. Clear technical labelling simplifies tool management and replacement, helping to maintain process security in production environments. Streamlined logistics and fast tool changes for productivity gains The standardised ISO-style designation assists in rapid identification and stocking: ADGX10T3PER-F56 WHH15. The nominal size and thickness allow use in compact milling heads where space is limited, lowering inventory complexity and shortening changeover times. As an indexable insert, the component delivers cost-effective reconditioning of cutting edges and reduces downtime compared with solid-tool replacement. Safe selection and application advice for optimal use Material compatibility varies by grade and coating; the WHH15 designation indicates a coated cemented carbide class, but specific machining parameters must be checked in the product matrix or technical datasheets. For set-up, select a toolholder matched to the parallelogram geometry and observe recommended feeds and speeds to preserve edge life. Manufacturer information and technical documentation should be consulted for best-practice machining windows. Contact Metav Werkzeuge for tailored integration advice on Walter Tools ADGX10T3PER-F56 WHH15, including specification matching and availability support Technical Data Article number: ADGX10T3PER-F56-WHH15-WALTER Product: Fräswendeschneidplatte Manufacturer: Walter Tools WPL grade: WHH15 Series: Walter Schneidstoffsorte - Serie offen Designation: ADGX10T3PER-F56 WHH15 SKU label: Fräswendeschneidplatte ADGX10T3PER-F56 WHH15 Walter Tools Core dimensions Size: 10 Thickness: T3 Shape: Parallelogramm 85° Clearance angle: 15° Chipbreaker: F56 Tolerance class: G Features / Notes Coating/material: Katalogabhängig Execution: X ISO designation: ADGX10T3PER-F56 WHH15 Guidance: Check product matrix for material suitability FAQ What does the designation ADGX10T3PER-F56 WHH15 mean? The designation identifies the insert geometry and size (10, T3 thickness), the F56 chipbreaker and the WHH15 coated carbide grade for the Walter Tools milling insert. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes predictable chip formation and evacuation, which reduces heat build-up at the cutting edge and helps maintain consistent surface finish. Is this insert suitable for all metals? Material suitability depends on the coating and grade; check the Walter Tools product matrix to confirm whether the WHH15 grade matches the intended workpiece material. What are the key installation considerations? Ensure the insert seats correctly in a compatible parallelogram toolholder, verify tolerance class G fit, and use recommended feeds and speeds to avoid premature wear. How is edge life maintained for this type of insert? Edge life is optimised by correct toolholder alignment, appropriate cutting parameters and by taking advantage of the indexed faces when one edge becomes worn. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
ADGX10T3PER-F56 WPM15G WPM15G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the F56 chipbreaker and a precise Parallelogram 85° form, this insert offers extended tool life and consistent chip control; order the ADGX10T3PER-F56 WPM15G directly via Metav Werkzeuge or consult our advisors for application-specific selection. ADGX10T3PER-F56 WPM15G – Parallelogram 85° indexable milling insert, Tiger·tec Gold, Walter Tools The ADGX10T3PER-F56 WPM15G is a coated carbide indexable milling insert engineered for stable general-purpose milling, featuring an F56 chipbreaker and a 15° relief angle for secure seating and predictable cutting behaviour. Tiger·tec Gold coating for reliable wear resistance Parallelogram 85° form for stable milling engagement F56 chipbreaker optimised for versatile chip control 15° relief angle for consistent seating and geometry Longer tool life through advanced coating and grade The combination of Tiger·tec Gold technology and the WPM15G grade provides a coating architecture and substrate balance that aims to extend tool life under demanding conditions. By favouring a coated carbide construction, the insert reduces flank wear and helps maintain a steady cutting edge, which in turn supports higher uptimes and fewer tool changes. This benefit is particularly relevant where consistent component quality and reduced downtime contribute directly to production efficiency. Geometry that stabilises the machining process The Parallelogram 85° form together with the 15° relief angle and F56 chipbreaker produces a reliable cutting geometry that improves process stability. The parallelogram shape gives a positive cutting engagement and helps distribute forces evenly across the insert seat, while the chipbreaker design promotes controlled chip formation and evacuation. Tolerance class G ensures accurate seating in standard toolholders, reducing vibration and enabling repeatable results in serial production. Straightforward integration into indexable systems Designed to meet standard indexable insert conventions, the ADGX10T3PER-F56 format makes integration into existing milling tool assemblies simple and predictable. Compatibility with conventional clamping systems and a common size designation supports quick replacement and inventory standardisation. As a Tiger·tec Gold series item from Walter Tools, the insert is aimed at workshops seeking a balance of wear resistance and process reliability without extensive retooling. Material guidance and application checks The grade WPM15G denotes a coated carbide solution; however, specific material suitability should be verified in the manufacturer's product matrix. This ensures the selected insert is matched to the workpiece material and cutting conditions. For users less familiar with technical classifications: a coated carbide insert combines a hard substrate with a thin, engineered surface layer to resist heat and abrasion, making it appropriate for many general milling tasks when matched correctly according to the matrix. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and ensure the ADGX10T3PER-F56 WPM15G matches the intended application; Metav Werkzeuge can advise on tooling combinations and availability (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: ADGX10T3PER-F56-WPM15G-WALTER Article name: ADGX10T3PER-F56 WPM15G Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger·tec Gold Core dimensions & numbers Insert size: 10 Insert thickness: T3 Relief angle: 15° Form angle: Parallelogram 85° Chipbreaker: F56 Tolerance class: G Materials & special features Grade: WPM15G (coated carbide) Coating technology: Tiger·tec Gold Execution: X Material designation: Katalogabhängig FAQ What chip control can be expected from this insert? The ADGX10T3PER-F56 WPM15G uses an F56 chipbreaker that is engineered for controlled chip formation and evacuation, improving process stability when the Walter Tools indexable milling insert is used in appropriate cutting conditions. Is this insert suitable for high-speed milling? The Tiger·tec Gold coating and WPM15G grade are designed to enhance wear resistance; however, high-speed suitability depends on the specific machining parameters and should be confirmed in the manufacturer's product matrix for the ADGX10T3PER-F56 WPM15G. How does the Parallelogram 85° form affect cutting forces? A Parallelogram 85° form provides a positive engagement angle that helps distribute cutting forces, reducing shock loads and promoting smoother milling when the insert is mounted in the correct Walter Tools toolholder. Can the ADGX10T3PER-F56 be used across different toolholders? The ADGX10T3PER-F56 WPM15G follows standard indexable insert dimensions and seating conventions, so it is compatible with matching clamping systems; verify seat and tolerance compatibility in the toolholder specification. Where to verify material suitability for this grade? Material compatibility for the WPM15G grade should be checked against the Tiger·tec Gold product matrix provided by Walter Tools to ensure the ADGX10T3PER-F56 WPM15G meets the workpiece and process requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADGX1606PER-F56 WXM15 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, targeted chip control and a geometry optimised for non‑ferrous machining to maintain smooth production. Order the insert directly via Metav Werkzeuge or consult our technical team for material‑specific guidance. ADGX1606PER-F56 WXM15 Fräswendeschneidplatte – Walter Tools, uncoated carbide for non‑ferrous metals The ADGX1606PER-F56 WXM15 is a parallelogram indexable insert designed for productive machining of non‑ferrous materials, combining a defined 15° relief and a dedicated F56 chipbreaker for reduced material adhesion. Uncoated carbide WXM15 for non‑ferrous metals Parallelogram 85° for stable positioning 15° relief angle for effective chip evacuation Chipbreaker F56 reduces material adhesion Higher throughput for non‑ferrous machining The WXM15 grade is an uncoated carbide designed specifically for the ISO N group, making it well suited to aluminium, copper and brass. Its cutting geometry emphasises low cutting forces and sharp cutting edges, which together enable faster feed rates and reliable surface quality on soft, adhesive materials. The result is measurable productivity gains when processing non‑ferrous workpieces. Reduced adhesion and improved chip control Equipped with the F56 chipbreaker, this indexable insert helps to break chips into manageable forms and reduces tendency for built‑up edge on sticky metals. The combination of the chipbreaker and the 15° relief promotes consistent chip flow and reduces machine downtime for manual cleaning, contributing to a steadier production rhythm and less scrap. Stable seating and repeatable accuracy The parallelogram 85° shape provides positive location and secure clamping in compatible toolholders, which supports repeatable positioning and consistent cutting geometry across index changes. This stability preserves the cutting edge profile and assists in predictable tool life, reducing the need for frequent re‑adjustment and maintaining component tolerances. Practical handling and series benefits As part of the Walter N‑Sortensystem, the insert fits established toolholder systems and benefits from the series’ focus on broad material coverage and process security. The straightforward handling of indexable inserts in this series cuts set‑up time and simplifies inventory management, while the uncoated nature of the grade avoids coating‑related adhesion issues on aluminium alloys. Application clarity and material scope Specified for the machining of non‑ferrous metals, the insert excels where sharp edges and low friction are required to avoid material build‑up. Typical use cases include face milling, light pocketing and finishing operations on aluminium parts, copper components and brass fittings where good surface quality and minimal burr formation are priorities. For material‑specific advice or to check compatibility with existing toolholders, contact Metav Werkzeuge for detailed consultation and availability at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data SKU: ADGX1606PER-F56-WXM15-WALTER Article designation: ADGX1606PER-F56 WXM15 Product type: Fräswendeschneidplatte Series: Walter N‑Sortensystem Manufacturer: Walter Tools Core specifications Relief angle: 15° Insert form: Parallelogram 85° Insert size: 16 Thickness: 06 Tolerance class: G Chipbreaker: F56 Special features Grade: uncoated carbide (WXM15) Material group: N (non‑ferrous metals) Execution: X Suitable for aluminium, copper, brass FAQ What materials is this insert intended for? The ADGX1606PER-F56 WXM15 is intended for ISO group N, i.e. non‑ferrous metals including aluminium, copper and brass. Is the cutting grade coated? No, the WXM15 grade is an uncoated carbide, chosen to reduce adhesion issues when machining soft, sticky materials. How does the chipbreaker affect performance? The F56 chipbreaker on this insert promotes controlled chip formation and reduces built‑up edge, improving surface finish and reducing manual cleaning. Will this insert fit standard Walter N‑system holders? Yes, the ADGX1606PER-F56 belongs to the Walter N‑Sortensystem and is compatible with matching toolholders designed for this series. What advantages does the 15° relief provide? The 15° relief combines effective clearance with low cutting forces, aiding chip flow and reducing friction during machining of non‑ferrous alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADHT0803PEL-G88 WXN15 T Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated carbide grade and an optimised chipbreaker to ensure efficient, low-adhesion machining of non-ferrous metals; request technical advice from Metav Werkzeuge or order directly via Metav Werkzeuge for reliable availability and application support. ADHT0803PEL-G88 WXN15 Fräswendeschneidplatte – parallelogram 85°, 15° relief, Walter Tools The ADHT0803PEL-G88 WXN15 is a parallelogram milling insert designed for productive machining of non‑ferrous metals with a positive cutting geometry and a G88 chipbreaker. Parallelogram 85° form for versatile milling Sharp, uncoated carbide grade WXN15 15° relief angle for positive cutting geometry Chipbreaker G88 prevents material build-up High-efficiency machining of non‑ferrous metals The combination of the WXN15 uncoated carbide grade and a sharp edge geometry delivers low cutting forces and minimal adhesion when processing non‑ferrous metals such as aluminium, copper and messÂing. The uncoated, wear‑resistant substrate permits a very keen cutting edge that reduces built‑up edge formation, while the integrated G88 chipbreaker supports predictable chip formation and evacuation. As a result, cycle times can be shortened and tool change frequency reduced, improving overall process efficiency. Positive geometry for smoother cuts and reduced power draw A 15° relief angle and the parallelogram 85° shape provide a positive rake and favourable approach angle for face and shoulder milling operations. This geometry lowers cutting forces and vibration, which leads to improved tool life and steadier power consumption on the machine. The modest 03 thickness offers a balance between edge stability and cutting access in confined toolholders, enabling precise material removal without unnecessary overload. Consistent surface quality with controlled chip behaviour The purposeful interaction of the sharp carbide grade and the G88 chipbreaker helps to avoid material build‑up on the cutting edge, producing a cleaner surface finish on the workpiece. Stable chip control reduces interruptions in automated setups and contributes to repeatable manufacturing results. Where surface quality and dimensional consistency are required, the insert’s design supports reliable production runs and predictable inspection outcomes. Practical integration into production and inventory The insert belongs to the Walter N‑Sortensystem, making it compatible with established Walter tool families and common clamping solutions. The clear designation and standard form allow straightforward stockkeeping and quick replacement in tool assemblies. For complex or batch production scenarios, technical documentation and material recommendations can be provided to support process parameter selection and tool‑holder pairing. For detailed application advice or to secure supply of the ADHT0803PEL-G88 WXN15 milling insert from Walter Tools, contact Metav Werkzeuge for prompt consultation and procurement support. Technical data Article number: ADHT0803PEL-G88-WXN15-WALTER Designation: ADHT0803PEL-G88 WXN15 Product type: Milling insert Series: Walter N‑Sortensystem Facts Relief angle: 15° Insert size: 08 Thickness: 03 Form: Parallelogram 85° Tolerance class: H Special features Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Execution: T Material application: Non‑ferrous metals (N) FAQ What materials is this insert intended for? The ADHT0803PEL-G88 WXN15 milling insert is intended for non‑ferrous metals such as aluminium, copper and messÂing, utilising the sharp, uncoated WXN15 grade and the G88 chipbreaker for low adhesion. Is the insert coated or uncoated? This insert is uncoated carbide (WXN15), selected to provide a very sharp cutting edge for NE‑metal applications where coatings could promote built‑up edge. Which operations benefit most from the parallelogram form? The parallelogram 85° form is suitable for face and shoulder milling where versatile approach angles and good edge visibility are required; it also supports effective chip evacuation with the G88 geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from the manufacturer.
ADHT0803PER-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of stable chip formation with the G88 chipbreaker and the WK10 uncoated carbide grade for consistent, productive milling. Order the ADHT0803PER-G88 WK10 insert directly via Metav Werkzeuge or request application advice from their consultants. ADHT0803PER-G88 WK10 milling indexable insert by Walter Tools — G88 chipbreaker, 15° clearance ADHT0803PER-G88 WK10 is a parallelogram-shaped milling insert designed for general milling applications where predictable chip control and robust cutting edges are required Precision uncoated carbide grade WK10 G88 chipbreaker for controlled chip formation Parallelogram 85° geometry for profiling stability 15° clearance for secure cutting engagement Reliable chip control for uninterrupted production The G88 chipbreaker is engineered to produce short, manageable chips under a wide range of cutting conditions, which supports uninterrupted machining and reduces machine downtime. The uncoated WK10 cemented-carbide grade provides a balance between toughness and wear resistance; its open-series design means the grade is suited for various applications, while the specific workpiece suitability should be verified against the product matrix. This combination facilitates a smoother chip flow and simplifies chip evacuation in diverse milling operations. Geometry that enhances accuracy and tooling life The parallelogram 85° shape and 15° clearance deliver a geometry optimised for stable cutting forces and predictable contact conditions in the tool pocket. The insert’s tolerance class H contributes to repeatable seating and consistent tool runout, which translates into more accurate part profiles and reduced rework. For cutters requiring defined lead angles or specific approach angles, this geometry supports controlled engagement and helps to protect the cutting edge during interrupted cuts. Material concept and application guidance for process reliability The insert is supplied in an uncoated cemented-carbide form as indicated by the WK10 designation; the open-series description reflects a universal approach to grade selection. While the grade offers solid baseline performance, the workpiece suitability must be confirmed via the product matrix for optimal results—this ensures the selected grade and chipbreaker match the intended materials and cutting parameters. Where higher abrasion resistance or specific coatings are required, alternative grades and coated versions should be considered. Integration into tooling systems and economic benefits As a standard indexable milling insert with the designation ADHT0803PER-G88 WK10, it fits into a wide range of milling cutter bodies that accept parallelogram inserts of size 08 and thickness code 03. The robust edge geometry and stable chip control help to extend effective cutting intervals, supporting a favourable cost-per-part metric and predictable tool-change planning. The open-series approach also simplifies inventory management, allowing straightforward substitution within the same grade family when necessary. Contact Metav Werkzeuge for application support or to secure ADHT0803PER-G88 WK10 inserts; technical consultation and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADHT0803PER-G88-WK10-WALTER Product designation: ADHT0803PER-G88 WK10 Product type: milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Size code: 08 Thickness code: 03 Clearance angle: 15° Shape: Parallelogram 85° Tolerance class: H Special features Grade: WK10 (uncoated cemented carbide) Chipbreaker: G88 Execution: T Series description: open series, check product matrix for material suitability FAQ What materials is the ADHT0803PER-G88 WK10 suitable for? Workpiece suitability must be checked against the product matrix; the ADHT0803PER-G88 WK10 is an uncoated cemented-carbide insert intended for general milling applications, with material ranges to be confirmed per application. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes short and controllable chips, reducing risk of chip entanglement and improving process stability during continuous milling. What does the parallelogram 85° shape offer in practice? The parallelogram 85° geometry provides stable cutting engagement and predictable contact conditions, which supports accurate profiling and reliable edge life in milling operations. Is the insert coated? The WK10 designation specifies an uncoated cemented-carbide grade; coating options are not indicated for this specific item and should be selected if required for abrasion-prone applications. Which tolerance and seating accuracy can be expected? The insert is supplied in tolerance class H, offering repeatable seating accuracy suitable for controlled tool runout and consistent part quality. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanatory purposes only; there is no affiliation implied. The offered article is original and factory new.
ADHT0803PER-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a very sharp cutting edge, an uncoated carbide grade optimised for non‑ferrous materials and a dedicated G88 chipbreaker to reduce built‑up edge and maintain consistent machining performance; order the milling insert directly via Metav Werkzeuge or consult our team for application advice. ADHT0803PER-G88 WXN15 milling indexable insert — 15° relief, parallelogram 85° — Walter Tools The ADHT0803PER-G88 WXN15 is a milling indexable insert engineered for precise, high‑quality machining of non‑ferrous metals in production and jobbing environments. *Uncoated carbide grade for NE‑metals *15° relief for reduced rubbing *Parallelogram 85° insert form *G88 chipbreaker for adhesion control Reduced built‑up edge and clean chips for non‑ferrous machining The combination of uncoated carbide and the WXN15 grade delivers a very sharp cutting edge that helps to prevent material adhesion when machining aluminium, copper and brass. The included G88 chipbreaker promotes predictable chip formation and evacuation, reducing the risk of clogging and rework. This results in more stable processes and fewer interruptions on the shop floor, especially in operations where surface finish and dimensional consistency are critical. Geometry designed for secure engagement and precision The 15° relief and parallelogram 85° plate form provide an advantageous cutting orientation for shoulder milling and light profiling of non‑ferrous workpieces. The geometry reduces flank contact and heat build‑up while supporting a controlled cutting action. As part of the Walter N‑grade system, this insert offers a consistent performance window for applications that require repeatable results and straightforward insert indexing. Practical benefits for production and easy process integration The insert’s size and thickness support common toolholders and clamping systems, making retrofits into existing milling setups uncomplicated. With the clear designation and standard form, the component simplifies tool management and reduces set‑up time. For production planners and machinists seeking a reliable solution for NE‑materials, the insert offers a pragmatic balance of precision and process stability without the need for coated grades. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools milling inserts — quote ADHT0803PER-G88 WXN15 for non‑ferrous machining and request detailed process parameters via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADHT0803PER-G88-WXN15-WALTER Designation: ADHT0803PER-G88 ISO designation: ADHT0803PER-G88 WXN15 Core data Size: 08 Thickness: 03 Relief angle: 15° Insert form angle: 85° Tolerance class: H Special features Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Series: Walter N‑grade system Material application: non‑ferrous metals (aluminium, copper, brass) Execution: T FAQ What materials is the ADHT0803PER-G88 WXN15 suitable for? The ADHT0803PER-G88 WXN15 is designed for non‑ferrous metals such as aluminium, copper and brass and performs well where sharp, uncoated cutting edges are required. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes controlled chip formation and evacuation, which helps to reduce built‑up edge and keep surfaces cleaner during milling of NE‑materials. Is this insert compatible with standard toolholders? Yes, the insert’s parallelogram 85° form and standard size make it compatible with common milling toolholders that accept this geometry and thickness. What process benefits does the 15° relief provide? The 15° relief reduces flank contact and friction, lowering heat generation and improving cutting action during shoulder milling and light profiling. Where can one get application advice or order this insert? For application support and ordering information, consult Metav Werkzeuge and reference the exact designation ADHT0803PER-G88 WXN15 when requesting parameters or stock details. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADHT10T3PER-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of WK10 uncoated carbide, a G88 chipbreaker and a 15° relief angle for consistent chip control and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. ADHT10T3PER-G88 WK10 milling indexable insert — Parallelogram 85°, 15° relief | Walter Tools The ADHT10T3PER-G88 WK10 is a parallelogram 85° milling indexable insert intended for versatile milling tasks where stable chip control and reproducible performance are priorities Parallelogram 85° insert geometry 15° relief angle for stable cutting G88 chipbreaker for reliable chip control Uncoated carbide grade WK10 Consistent chip control for steady productivity The combination of the G88 chipbreaker with the uncoated carbide grade delivers improved chip formation in a range of machining conditions. The chipbreaker is engineered to break and evacuate chips reliably, which reduces re-cutting and minimises interruptions in continuous milling operations. This results in more stable machining cycles and contributes to higher overall process efficiency. For precise expectations regarding workpiece materials, consult the manufacturer matrix to confirm compatibility. Stable geometry for predictable tool life The parallelogram 85° insert form and the 15° relief angle provide a robust edge geometry that enhances support during side and face milling operations. The moderate relief angle helps maintain cutting-edge strength while reducing rubbing at the flank, supporting repeatable tool performance. The insert’s designation and thickness (T3) indicate a compact but sturdy profile suited to many common milling holders; the WK10 grade is an uncoated carbide designed for general-purpose use, and checks against the product matrix are recommended to determine optimal cutting parameters for specific materials. Clear selection and integration for machining systems Integration into standard milling toolholders is straightforward thanks to the common ADHT-style geometry and the nominal size indicator. Selection should be guided by the intended application: choose the WK10 grade and G88 chipbreaker where consistent chip control and economical performance are required. Technical compatibility—such as seat geometry, clamping type and recommended cutting data—can be confirmed with Metav Werkzeuge before purchase to ensure the insert matches the machining strategy and equipment used. For reliable, productive milling with Walter Tools' WK10 grade and G88 chipbreaker, contact Metav Werkzeuge for tailored technical advice and prompt supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: ADHT10T3PER-G88-WK10-WALTER Designation: ADHT10T3PER-G88 WK10 Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 10 Plate thickness: T3 Tolerance class: H Special features Chipbreaker: G88 Grade: WK10 (uncoated carbide) Insert form: Parallelogram 85° Series: Walter Schneidstoffsorte - Serie offen Execution: T Material: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability depends on the specific machining task; the ADHT10T3PER-G88 WK10 uses an uncoated carbide grade (WK10) and the product matrix should be consulted to determine suitability for particular steels and non-ferrous alloys. How does the G88 chipbreaker help in milling? The G88 chipbreaker promotes controlled chip formation and evacuation, which reduces interruptions and improves surface quality when using the ADHT10T3PER-G88 WK10 insert. What are the key geometric features to consider? The parallelogram 85° form and the 15° relief angle are the primary geometric factors that deliver stability and edge support for side and face milling operations with this insert. Is the insert coated? The ADHT10T3PER-G88 WK10 is supplied as an uncoated carbide grade (WK10), so users should select cutting parameters accordingly and verify coating needs per application. Which toolholders are compatible with this designation? ADHT-style holders that accept a parallelogram 85° insert form and the corresponding size accommodate this insert; confirm seat and clamping compatibility with supplier documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation and identification. No affiliation is claimed between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
ADHT10T3PER-G88 WXN15 T Wendeplatten - Walter Tools
High‑precision results for non‑ferrous machining are achieved by combining the WXN15 uncoated carbide grade with the G88 chipbreaker and a parallelogram 85° geometry, delivering clean edges and stable chip formation. Order the ADHT10T3PER‑G88 WXN15 directly via Metav Werkzeuge or ask our consultants if needed. ADHT10T3PER-G88 WXN15 – Indexable milling insert, sharp uncoated carbide for non‑ferrous metals (Walter Tools) The ADHT10T3PER‑G88 WXN15 is a parallelogram 85° indexable insert with a 15° relief, engineered for high‑performance machining of non‑ferrous metals such as aluminium and brass Sharp uncoated carbide WXN15 for NE‑metals Parallelogram 85° geometry for robust engagement 15° relief angle for precise, burr‑free cuts G88 chipbreaker for consistent chip control Productivity gains for non‑ferrous machining The combination of a sharp, uncoated carbide grade and a geometry tuned for non‑ferrous materials yields measurable productivity benefits. The WXN15 grade is designed for clean shearing of aluminium, copper and brass, reducing built‑up edge and minimising secondary finishing. This insert’s sharp cutting edge and uncoated surface help maintain low cutting forces at typical speeds for non‑ferrous alloys, which in turn supports longer tool life in many standard applications while keeping process costs predictable. Geometry and chip control for consistent surfaces A parallelogram 85° form and 15° relief provide a stable cutting stance with reliable engagement at the toolholder seat; the geometry reduces chatter and improves surface finish on long or thin components. The integrated chipbreaker G88 promotes controlled chip formation and evacuation, which is crucial when machining sticky or soft alloys. The insert’s T3 thickness ensures secure clamping and resistance to edge deformation, so fewer interruptions for regrinding or part rework are required—supporting smoother production cycles. Grade selection and workshop advantages Built within the Walter N‑grade system, this insert suits sharp, uncoated cutting strategies where adhesion‑free performance is required. The design and tolerance class H deliver repeatable seating, enabling quick index changes and minimal set‑up deviation. For workshops processing a range of non‑ferrous components, the ADHT10T3PER‑G88 WXN15 offers a pragmatic balance of surface quality and chip control, simplifying tooling variants while maintaining consistent results across batches. For proven chip control in non‑ferrous machining, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the ADHT10T3PER‑G88 WXN15 insert and suitable holder options. Technical Data Article number: ADHT10T3PER-G88-WXN15-WALTER Designation: ADHT10T3PER‑G88 WXN15 Product type: Indexable milling insert Manufacturer: Walter Tools Facts Size: 10 Thickness: T3 Free angle: 15° Plate form angle: Parallelogram 85° Tolerance class: H Special features Grade: uncoated carbide WXN15 Chipbreaker: G88 Series: Walter N‑grade system Suitable for: Non‑ferrous metals (aluminium, copper, brass) Application: sharp / uncoated cutting FAQ What materials is this insert best suited for? The ADHT10T3PER‑G88 WXN15 insert is optimised for non‑ferrous metals such as aluminium, copper and brass, where a sharp, uncoated cutting edge reduces material adherence. How does the G88 chipbreaker improve machining? The G88 chipbreaker promotes short, controllable chips and prevents long stringing chips, improving process stability and reducing the risk of surface damage during milling. Which cutter body and holder geometry pair well with this insert? A rigid milling cutter with a matching parallelogram 85° seat and secure clamping is recommended; the 15° relief and T3 thickness ensure proper support and repeatable indexability. Is the WXN15 grade coated or uncoated? WXN15 is an uncoated carbide grade designed for sharp cutting applications in non‑ferrous materials, prioritising low adhesion and crisp shearing action. What does tolerance class H mean for repeatability? Tolerance class H denotes tight manufacturing tolerances that support accurate seating and consistent tool runout, which helps reduce set‑up times and improves reproducibility between insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision metal‑cutting tools and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected marks are used here for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
ADHT120416L-G88 WXN15 T Wendeplatten - Walter Tools
Benefit from a tool that combines sharp, uncoated carbide performance for non-ferrous metals with a parallelogram 85° geometry and a 15° free angle to reduce cutting forces and improve surface quality. Order the inserts directly via Metav Werkzeuge or contact the consultants for application-specific advice. ADHT120416L-G88 WXN15 milling indexable insert – Parallelogram 85°, 15° free angle (Walter Tools) The ADHT120416L-G88 WXN15 is a precision milling indexable insert engineered for sharp, uncoated cutting in non‑ferrous metals within the Walter N‑series. Walter N‑series uncoated carbide WXN15 Optimised for non‑ferrous metals like aluminium Parallelogram 85° geometry, 15° free angle High‑efficiency cutting for non‑ferrous metals The insert is built on an uncoated carbide substrate optimised for non‑ferrous metals (ISO group N), providing a very sharp cutting edge that minimises material adhesion and reduces built‑up edge. The WXN15 grade is designed specifically for abrasive‑sensitive workpieces such as aluminium, copper and brass, combining edge sharpness with sufficient toughness to withstand interrupted cuts. The chipbreaker G88 improves chip formation and evacuation, which helps maintain stable process behaviour and reduces the risk of surface blemishes on delicate workpieces. This results in predictable machining and fewer rework cycles. Geometry that improves control and surface finish The parallelogram 85° shape together with a 15° free angle lowers effective cutting forces and offers a positive engagement for slotting and face milling operations. The corner radius of 1.6 mm balances edge strength and finish: small enough for fine finishes, yet large enough to resist premature chipping under moderate feed rates. These geometric choices support higher feed per tooth and better productivity while preserving component quality, making the insert suitable for demanding production runs and one‑off precision parts alike. Operational benefits for workshop efficiency Thanks to the combination of uncoated carbide and a dedicated chipbreaker, this insert delivers consistent chip control and low tendency to smear on soft metals, enabling longer tool‑change intervals and reduced machine downtime. Secure clamping from the parallelogram form ensures repeatable seat orientation, which simplifies indexable insert changes and cuts set‑up time. Where reduced post‑machining is crucial, the result is fewer finishing passes and lower total cycle time, increasing overall throughput on small and medium series production. Practical handling and application notes The insert suits operations where sharp, uncoated edges are preferable for thermal‑sensitive workpieces. For best results, combine with appropriate cutting fluids or high‑pressure air for aluminium applications to further limit adhesion. The designation in the Walter N‑series signals compatibility with established Walter toolholders; selection of the correct seat and clamp is essential for repeatable performance. The SKU and series labelling ensure traceability and straightforward ordering for production planning. Contact Metav Werkzeuge for application support or ordering of Walter Tools ADHT120416L-G88 WXN15 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and availability Product details Article number: ADHT120416L-G88-WXN15-WALTER ISO designation: ADHT120416L-G88 WXN15 Series: Walter N‑series Grade: WXN15 Manufacturer: Walter Tools Dimensions & numbers Free angle: 15° Corner radius: 1.6 mm Insert size: 12 Thickness code: 04 Tolerance class: H Materials & special features Shape: Parallelogram 85° Chipbreaker: G88 Execution: T Substrate: uncoated carbide (for non‑ferrous metals) FAQ What materials is this insert best suited for? The ADHT120416L-G88 WXN15 insert from Walter Tools is optimised for non‑ferrous metals (ISO group N), such as aluminium, copper and brass, offering sharp cutting edges and good chip evacuation. How does the G88 chipbreaker help in production? The G88 chipbreaker promotes consistent chip formation and evacuation for the WXN15 grade, reducing the risk of material adhesion and improving surface finish during continuous milling operations. Can this insert be used for interrupted cuts? Yes, the combination of the parallelogram 85° geometry and the WXN15 substrate provides sufficient toughness for many interrupted cut scenarios in non‑ferrous applications; however, machining parameters should be corrected to the specific workpiece and holder. Is the insert coated? No, the WXN15 grade is an uncoated carbide developed for sharp, low‑adhesion performance on soft metals. Which aspects help reduce setup and downtime? The positive parallelogram form ensures repeatable seating and secure clamping, which simplifies indexing and reduces tool‑change time for production environments. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark holders. The offered item is original, factory‑new merchandise from the manufacturer.
ADHT120416R-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of a sharp, uncoated grade paired with an optimised G88 chipbreaker to ensure clean, predictable machining of non‑ferrous materials; the design combines reliable chip control with a stable cutting edge for efficient production. Order the ADHT120416R-G88 WXN15 directly via Metav Werkzeuge or ask our consultants if needed. ADHT120416R-G88 WXN15 milling insert — Parallelogram 85°, 15° relief, Walter Tools The ADHT120416R-G88 WXN15 is a milling insert designed for productive machining of non‑ferrous metals, offering a sharp uncoated cutting grade within the Walter N‑Sortensystem. WXN15 uncoated carbide for NE‑metals Parallelogram 85° geometry for versatile milling 15° relief angle for secure cutting action G88 chipbreaker for controlled chip formation Precise chip control for reliable non‑ferrous machining The insert’s G88 chipbreaker and the WXN15 uncoated carbide grade are specifically configured for non‑ferrous materials such as aluminium, copper and brass. This combination reduces material adhesion and promotes consistent chip evacuation, which leads to fewer interruptions in production and less manual cleaning of components. The result is a measurable improvement in process stability and surface integrity when compared with blunt or incorrectly matched grades, making the insert especially suitable for shops seeking predictable throughput on NE‑metal families. Geometry that enhances stability and repeatability The parallelogram 85° shape with a 15° relief angle and a 1.6 mm corner radius delivers a balance between cutting strength and fine edge definition. These geometric choices contribute to a stable cutting edge under variable feed conditions and help maintain dimensional accuracy during profile milling and slotting operations. The insert’s geometry and tolerance class H provide repeatable seating and orientation in compatible toolholders, reducing setup time and ensuring consistent results across batches. System compatibility and application guidance for production use As part of the Walter N‑Sortensystem, the insert integrates into established milling tool families, offering straightforward interchangeability and inventory management. The uncoated, sharp grade is optimised for short to medium engagement milling, where built‑up edge is a primary concern; in such applications the insert helps achieve better surface finish and reduces the need for secondary operations. For further machining parameters or to verify suitability for a specific alloy, Metav Werkzeuge provides application guidance and can assist with insertion into existing tool assemblies. Contact Metav Werkzeuge for tailored application advice and to arrange supply of Walter Tools ADHT120416R-G88 WXN15 inserts directly through their distribution network Technical data SKU: ADHT120416R-G88-WXN15-WALTER Type: Fräswendeschneidplatte (milling insert) Designation: ADHT120416R-G88 WXN15 Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Chipbreaker: G88 Grade/Sort: WXN15 Series: Walter N‑Sortensystem Tolerance class: H Special features Uncoated carbide grade for NE‑metals Optimised for aluminium, copper and brass Sharp cutting edge for reduced adhesion Compatible with Walter N tool families Ausführung: T FAQ What materials is this insert suited for? The ADHT120416R-G88 WXN15 insert is designed for non‑ferrous metals (N group), including aluminium, copper and brass; the WXN15 uncoated carbide supports sharp‑edge applications to avoid material build‑up. How does the G88 chipbreaker improve machining? The G88 chipbreaker on this milling insert shapes and controls chips to reduce clogging and improve evacuation, which enhances surface finish and steady‑state cutting performance with NE‑metals. What does the parallelogram 85° shape offer in practice? The parallelogram 85° geometry allows versatile approach angles for profiling and face milling while keeping a robust cutting edge; it supports repeatable seating and stable force distribution in the holder. Is the insert part of a larger system for inventory management? Yes, the insert belongs to the Walter N‑Sortensystem, enabling compatibility with matching toolholders and simplifying spare‑part logistics within Walter tool families. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer. The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
ADHT120430L-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp, uncoated cutting geometry and targeted chip control to achieve cleaner surfaces and reliable batch processing; order the insert directly via Metav Werkzeuge or consult the team for tailored cutting data. ADHT120430L-G88 WXN15 — Fräswendeschneidplatte for non‑ferrous metals, Walter Tools ADHT120430L-G88 WXN15 is a parallelogram milling insert engineered for sharp, uncoated cutting of non‑ferrous metals such as aluminium, copper and brass Uncoated carbide WXN15 for sharp cutting 15° relief angle for low cutting forces Parallelogram 85° shape for reliable engagement G88 chipbreaker for controlled chip formation Faster, cleaner cuts in non‑ferrous components The ADHT120430L-G88 WXN15 is designed around the WXN15 uncoated grade to deliver very sharp edges and low adhesion when machining non‑ferrous metals. The combination of a keen cutting edge and the G88 chipbreaker reduces material build‑up and promotes predictable chip ejection, which directly supports higher effective machining rates and less secondary cleaning. For operations where surface appearance and minimal burr formation are decisive, this configuration offers a pragmatic balance between immediate cutting performance and process stability. Reduced cutting forces and improved process stability The insert’s 15° relief angle reduces radial cutting resistance and helps maintain consistent contact conditions at the cutting edge. The geometry, paired with a 3 mm corner radius, provides a compromise between edge strength and the ability to produce fine surface finishes; the radius dampens micro‑vibrations without sacrificing sharpness. These design choices translate into lower tool load variation and a steadier machining rhythm, which is particularly beneficial during medium‑depth finishing passes on softer alloys. Geometry tailored for predictable engagement The parallelogram 85° form supports a defined approach angle that aids in predictable tool engagement and chip flow across a wide range of feeds. Used within the Walter N grade system, the insert suits applications that require sharp, uncoated performance—especially where sticky or adhesive tendencies in the workpiece material can lead to built‑up edge. The arranged geometry simplifies fixture planning and contributes to consistent results across repeated cycles, helping to reduce scrap rates in batch production. Practical benefits for workshop integration Because the grade is uncoated carbide, it is particularly effective on aluminium and other non‑ferrous alloys where coatings can increase friction and promote material sticking. The clear chip control afforded by the G88 chipbreaker reduces manual chip clearing and lowers the frequency of interruptive interventions. For process planners this means improved uptime and a smoother workflow when the focus is on surface integrity and short‑cycle repeatability rather than heavy interrupted cutting. Choosing the right insert for the job Select this insert when priority is given to clean edges, minimal material adhesion and straightforward chip evacuation in non‑ferrous machining. The combination of the WXN15 uncoated grade and the specific edge geometry makes it a pragmatic choice for finish and light‑to‑medium machining tasks on aluminium, copper and brass alloys. For unusual alloys or special process constraints, technical advisors can help align the insert geometry with required feeds and toolpath strategies. Contact Metav Werkzeuge for tailored advice on Walter Tools ADHT120430L-G88 WXN15 and to discuss optimal cutting data or availability Technical Data SKU: ADHT120430L-G88-WXN15-WALTER Description: Fräswendeschneidplatte ADHT120430L-G88 WXN15 Walter Tools Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 3 Plate form: Parallelogramm 85° Plate size: 12 Plate thickness: 04 Special features Walter N grade system Sorte: WXN15 (uncoated carbide) Chipbreaker: G88 Series: Walter N‑Sortensystem Application: non‑ferrous metals (aluminium, copper, brass) FAQ What materials is this insert best suited for? The ADHT120430L-G88 WXN15 is intended for non‑ferrous metals such as aluminium, copper and brass, where its sharp, uncoated geometry minimises adhesion. Is the WXN15 grade coated or uncoated? The WXN15 grade is an uncoated carbide grade designed for sharp cutting and low adhesion in NE‑metal applications. How does the G88 chipbreaker affect machining? The G88 chipbreaker is configured to produce predictable, manageable chips and to reduce material build‑up on the cutting edge during finish and light machining passes. What benefits does the parallelogram 85° shape provide? The parallelogram 85° form offers a defined engagement angle for steady cutting contact and improved chip evacuation across common milling strategies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product from the manufacturer.
ADHT1204PEL-G88 WXN15 Wendeplatten - Walter Tools
The word 'messung' should be corrected to 'brass'. Order via Metav Werkzeuge or contact our consultants for tailored tooling advice. ADHT1204PEL-G88 WXN15 — indexable milling insert, parallelogram 85°, 15° relief — Walter Tools ADHT1204PEL-G88 WXN15 is an indexable milling insert engineered for efficient, burr‑reduced machining of non‑ferrous materials within the Walter N‑series tooling concept. Uncoated carbide grade WXN15 Optimised G88 chipbreaker Parallelogram 85° insert form 15° relief angle for sharp edges High‑speed productivity for non‑ferrous alloys The WXN15 grade is an uncoated carbide designed specifically for machining non‑ferrous metals such as aluminium, copper and brass. Its sharp cutting geometry reduces the tendency for material adherence and built‑up edge, which in turn improves surface finish and allows for higher feed rates without compromising component quality. Where sticky materials otherwise impair productivity, this insert keeps cycle times stable while maintaining consistent edge condition. Reliable chip control and stable cutting The G88 chipbreaker provides controlled chip formation and efficient evacuation, reducing recutting and the risk of edge damage. Combined with the parallelogram 85° form and 15° relief, the geometry ensures better access in shoulder and profile milling while delivering vibration damping and reproducible cutting forces. For workshops requiring predictable outcomes, the insert's geometry translates into fewer process interruptions and reduced scrap rates. System compatibility and economical operation As part of the Walter N‑series, the insert is intended for sharp, uncoated applications on non‑ferrous materials and integrates into established milling systems that accept ADHT‑style plates. The result is a balance of tool life and reliable performance that supports continuous production: sharp edges for quality surfaces, precise chip control for machine uptime, and straightforward reconditioning cycles where applicable. For specific cutting data and matching toolholders, Metav Werkzeuge provides application support to align feeds and speeds with machining goals. Contact Metav Werkzeuge for expert selection of Walter Tools inserts with WXN15 grade and G88 chipbreaker; phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitable toolholder pairings and delivery options. Technical data Article number: ADHT1204PEL-G88-WXN15-WALTER Designation: ADHT1204PEL-G88 WXN15 Series: Walter N-Sortensystem Manufacturer: Walter Tools Key dimensions Insert size: 12 Thickness: 04 Relief angle: 15° Plate form: Parallelogramm 85° Tolerance class: H Features / Applications Chipbreaker: G88 Grade: WXN15 (uncoated carbide) Suitable for: non‑ferrous metals (N) Execution: T Insert type: indexable milling insert FAQ Is this insert suitable for aluminium machining? Yes. The ADHT1204PEL-G88 WXN15 insert from Walter Tools is optimised for aluminium and other non‑ferrous metals, offering sharp edges and reduced material adhesion for improved surface finish. What benefit does the G88 chipbreaker provide? The G88 chipbreaker forms short, controllable chips and directs them away from the cutting zone, reducing recutting and promoting steady cutting forces for consistent process behaviour. Why choose the parallelogram 85° form and 15° relief? The parallelogram 85° shape increases approach flexibility in profile and shoulder milling, while the 15° relief maintains a sharp cutting geometry that lowers cutting forces and helps prevent built‑up edge. Is the WXN15 grade coated? No. WXN15 is an uncoated carbide grade intended for sharp, low‑adhesion applications on non‑ferrous materials, where coatings can sometimes increase friction. What production advantages can be expected in series machining? Using the Walter N‑series plates with WXN15 and G88 typically yields improved repeatability, fewer interruptions due to better chip control, and a predictable surface quality at higher feeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names belong to their respective owners. Brand names and registered trademarks are used for explanation only. There is no affiliation with the mentioned manufacturers; the offer concerns original, factory‑new items from the stated brand.
ADHT1204PER-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of the uncoated WK10 carbide grade and the G88 chipbreaker for consistent chip control and sustained performance; the Parallelogram 85° form with 15° clearance enables flexible mounting and stable cutting. Order via Metav Werkzeuge or request technical advice from the consultants for precise grade selection. ADHT1204PER-G88 WK10 Fräswendeschneidplatte – Parallelogram 85°, 15° clearance (Walter Tools) The ADHT1204PER-G88 WK10 is a milling indexable insert designed for versatile positioning and dependable chip control in industrial milling applications. Walter Tools insert ADHT1204PER-G88 WK10 Parallelogram 85° shape for flexible positioning 15° clearance angle for stable cutting Uncoated carbide grade WK10, reliable wear resistance Accurate chip control for consistent machining The ADHT1204PER-G88 WK10 insert combines an engineered G88 chipbreaker with an uncoated carbide substrate to deliver controlled chip formation and predictable cutting forces. This combination reduces the risk of interrupted cuts and supports process stability on compatible workpieces; suitability for specific materials should be verified against the product matrix. The insert form and chip geometry are intended to promote steady material removal and to contribute to longer tool life under stable cutting conditions. Flexible clamping and quick indexability to reduce downtime The Parallelogram 85° configuration and compact dimensions (insert size 12, thickness 04) allow multiple clamping orientations, simplifying insert indexing and setup. With tolerance class H, repeatable seating is supported, which helps to reduce adjustment time during tool changes. These attributes translate into improved machine utilization and a more economical production flow when combined with a standardised tooling system. Specification guidance and selection for production needs For correct application, the WK10 grade and the insert geometry should be matched to the machining task via the manufacturer’s product matrix; the series is part of Walter’s open grade offering. Where process reliability is required, documentation on clearance angle, chipbreaker type and dimensional tolerances assists in selecting the right insert. Metav Werkzeuge can supply batch availability data and grade comparisons to ensure the chosen insert meets the operational goal of steady, productive cutting. Contact Metav Werkzeuge for specification support and availability of Walter Tools ADHT1204PER-G88 WK10 inserts on +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: ADHT1204PER-G88-WK10-WALTER Designation: ADHT1204PER-G88 WK10 SKU: ADHT1204PER-G88-WK10-WALTER Facts Clearance angle: 15° Shape: Parallelogram 85° Insert size: 12 Thickness: 04 Tolerance class: H Special features Chipbreaker: G88 Grade: uncoated carbide WK10 Series: Walter grade series (open) Form: Parallelogram, 85° orientation Manufacturer: Walter Tools FAQ What materials is this insert suitable for? Material suitability must be verified in the manufacturer’s product matrix; the ADHT1204PER-G88 WK10 is an uncoated carbide insert whose best-fit materials depend on the specific grade recommendations. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes controlled chip formation and improved chip evacuation, enhancing process stability when the ADHT1204PER-G88 WK10 insert is used under recommended cutting conditions. Can the parallelogram 85° shape be used for different cutter types? Yes, the parallelogram 85° shape allows alternative mounting orientations and is compatible with milling cutters designed for this insert geometry, improving flexibility in cutter design. What does tolerance class H imply for setup? Tolerance class H indicates consistent dimensional accuracy for repeatable seating and reliable indexing, which supports fast tool changes and predictable positioning of the insert. Is the WK10 grade coated? No; the WK10 grade specified for this insert is an uncoated carbide grade and should be selected based on the application matrix and operational requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations (Walter Tools) are mentioned solely to explain product compatibility. There is no connection between Metav Werkzeuge and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
ADHT1204PER-G88 WXN15 WXN15 Wendeplatten - Walter Tools
The combination of a sharp, uncoated carbide grade and a G88 chipbreaker ensures reliable swarf control and efficient machining of non‑ferrous materials, improving productivity in batch and serial milling. Order the insert directly via Metav Werkzeuge or contact our specialists for application advice. ADHT1204PER-G88 WXN15 milling insert for non‑ferrous metals — Walter Tools The ADHT1204PER-G88 WXN15 is a parallelogram‑style milling insert with a 15° relief angle, optimised for sharp, uncoated cutting performance in non‑ferrous metal machining. Parallelogram 85° geometry for versatile milling Sharp uncoated carbide grade WXN15 G88 chipbreaker for controlled swarf formation 15° relief angle for reduced cutting forces High‑efficiency milling of non‑ferrous materials The ADHT1204PER‑G88 WXN15 is designed around a sharp, uncoated carbide grade that favours low adhesion and clean shearing when machining non‑ferrous metals such as aluminium and copper alloys. The combination of an acute cutting geometry and the WXN15 material class produces a keen cutting edge that reduces built‑up edge formation and promotes consistent surface finish. For applications where friction and material sticking are critical, this insert supports stable cutting behaviour and predictable tool life. Controlled chip formation and extended edge life The G88 chipbreaker provides dependable swarf control, directing chips away from the cutting zone to prevent recutting and minimise heat concentration. Together with the 15° relief angle, this geometry lowers cutting forces and helps maintain a steady, sharp edge over successive passes. The result is improved process reliability during continuous milling operations and fewer interruptions for edge changes, supporting a more efficient production flow. Practical handling and series compatibility for production Part of the Walter N‑grade system, this insert is classified for sharp, uncoated use with non‑ferrous workpieces and is produced to a tolerance class H for consistent dimensions. The parallelogram (85°) shape provides flexibility in cutter indexing and can be selected when a balance of radial and axial engagement is required. By choosing an insert from a coherent grade series, procurement and inventory management become simpler, helping to streamline tool selection and maintain productive machining across different workpieces. Contact Metav Werkzeuge for availability, detailed application guidance and to discuss how Walter Tools inserts like the ADHT1204PER‑G88 WXN15 can optimise current milling cycles — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: ADHT1204PER-G88-WXN15-WALTER Article designation: ADHT1204PER-G88 WXN15 Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 12 Thickness code: 04 Relief angle: 15° Plate form: Parallelogram 85° Tolerance class: H Special features Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Series: Walter N‑grade system Application: Non‑ferrous metals (ISO group N) Free angle: 15° FAQ What materials is this insert intended for? The ADHT1204PER‑G88 WXN15 is intended primarily for non‑ferrous metals (ISO group N), including aluminium alloys and similar materials. Is the WXN15 grade coated or uncoated? The WXN15 grade is an uncoated carbide grade optimised for sharp‑edge performance in non‑ferrous machining. How does the G88 chipbreaker affect machining? The G88 chipbreaker helps control chip shape and evacuation, reducing the risk of recutting and improving stability in continuous milling operations. What is the significance of the parallelogram 85° form? A parallelogram 85° geometry offers a balanced engagement for radial and axial cutting forces, useful where a defined cutting orientation and indexable positions are required. Which series does this insert belong to and what does that mean for procurement? This insert is part of the Walter N‑grade system, which standardises grade characteristics for easier tool selection and consistent performance across matching applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
ADHT160616R-G88 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of reliable cutting performance, a 15° clearance angle and a 1.6 mm corner radius for productive milling operations; order the ADHT160616R-G88 WK10 milling insert directly via Metav Werkzeuge or ask the consultants if needed. ADHT160616R-G88 WK10 milling insert — 15° clearance, 1.6 mm corner radius — Walter Tools The ADHT160616R-G88 WK10 is a parallelogram 85° milling insert designed for general face and shoulder milling where an uncoated carbide grade is required and consistent chip control is essential. 15° clearance angle for positive cutting 1.6 mm corner radius for robust edges Parallelogram 85° insert geometry Uncoated carbide grade WK10 Increased productivity through predictable chip control The parallelogram geometry combined with the G88 chipbreaker enables controlled chip formation during interrupted and continuous cuts, which reduces recutting and improves process stability. This geometry, together with the 15° clearance angle, lowers cutting forces in many milling conditions and can translate into smoother feed rates and fewer tool changes. For production environments where cycle time and repeatability matter, the insert’s design supports a steady machining rhythm and clearer planning of tool life. Material suitability and application guidance The insert is supplied in the WK10 grade — an uncoated carbide option within Walter’s open series — and its material matrix should be consulted to determine optimal workpiece compatibility. The designation indicates an economical, general-purpose carbide; however, the specific workpiece materials and cutting parameters must be verified in the product matrix before use. When chosen appropriately, this grade can offer a balance between edge strength and cost-efficiency for a range of machining tasks. Robust edge life thanks to geometry and radius A 1.6 mm corner radius increases the strength of the cutting edge and reduces vulnerability to chipping under heavy loads or interrupted cuts. The insert’s parallelogram 85° form provides a stable seat and a positive cutting orientation that concentrates the cutting forces favourably for shoulder milling. In practice, a larger corner radius can permit higher feed per tooth while preserving surface quality, making the geometry suitable for both light finishing passes and more aggressive material removal where machine rigidity allows. Practical benefits for workshop efficiency Specified as ADHT160616R-G88 WK10, this insert is straightforward to integrate into existing toolholders that accept the parallelogram 85° form. The combination of a dedicated chipbreaker, defined clearance angle, and a reinforced corner reduces downtime from edge failure and streamlines tool management. By selecting the correct insert geometry and grade for the job and referring to the technical matrix for cutting data, shops can achieve better tool utilisation and predictable part quality without unnecessary over-specification. For personalised application advice or to check immediate availability of genuine Walter Tools inserts, contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) for consultation and ordering. Technical data Article number: ADHT160616R-G88-WK10-WALTER Designation: ADHT160616R-G88 WK10 Product type: Milling insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WK10 Execution: T Tolerance class: H Numbers / core technical data Clearance angle: 15° Corner radius: 1.6 mm Insert size: 16 Thickness code: 06 Designs / special features Insert shape: Parallelogram 85° Chipbreaker: G88 Material information: Katalogabhängig ISO designation: ADHT160616R-G88 WK10 Notes: Sorteneinsatz / Werkstoffeignung prüfen anhand der Produktmatrix FAQ What materials is this insert suitable for? The ADHT160616R-G88 WK10 is an uncoated carbide grade; suitability depends on the workpiece and cutting data — check the product matrix for specific material recommendations. Is the 1.6 mm corner radius suitable for finishing? A 1.6 mm corner radius provides robustness and can be used for light finishing where a slightly stronger edge is acceptable; for fine finish requirements, consider smaller radii supported in the same series. Which chipbreaker does this insert use and why does it matter? This insert features the G88 chipbreaker, designed to promote controlled chip formation and reduce recutting, which helps maintain process stability during both interrupted and continuous milling. Can this insert be used for shoulder milling? Yes, the parallelogram 85° form and positive clearance angle make the insert appropriate for shoulder milling applications when matched with suitable holders and cutting parameters. What should be checked before selecting this insert for production? Before selection, verify workpiece material compatibility and recommended cutting data in the WK10 product matrix and confirm holder compatibility for the parallelogram 85° form. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group and is a globally recognised manufacturer of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
ADHT160616R-G88 WXN15 T Wendeplatten - Walter Tools
Take advantage of a precise cutting geometry and a sharp, uncoated carbide grade optimised for non‑ferrous metals to maintain high process stability and low material adhesion. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. ADHT160616R-G88 WXN15 milling indexable insert – 15° clearance, 1.6 mm corner radius | Walter Tools ADHT160616R-G88 WXN15 is a milling indexable insert designed for sharp, uncoated performance when machining non‑ferrous materials such as aluminium and copper Uncoated carbide for non‑ferrous metals Sharp cutting edge for minimal adhesion Parallelogram 85° geometry for axial milling 15° clearance angle for secure chip flow Reliable cutting for non‑ferrous machining The insert offers an uncoated carbide composition coupled with a very sharp cutting edge, specifically engineered for machining non‑ferrous metals. This combination reduces the tendency for material to stick to the cutting edge, which in turn improves surface finish and reduces rework. The product’s grade, WXN15, is specified for clean, burr‑reduced cutting in aluminium, copper and similar alloys, delivering predictable tool life in repetitive production tasks. By choosing this geometry, workshops benefit from consistent chip formation and improved process reliability. Geometry that supports efficient milling Featuring a parallelogram 85° form and a corner radius of 1.6 mm, the insert provides a balance between edge strength and sharpness. The 85° approach angle is advantageous for axial milling operations where stable cutting forces and controlled chip evacuation are required. The 15° clearance angle further reduces rubbing along the flank, lowering heat build‑up and wear. These geometrical attributes translate into smoother feeds, longer edge life and fewer tool changes, which increases machine availability and reduces cycle times. Application advantages and practical benefits Built into the Walter N‑grade system, this insert is intended for productive machining of non‑ferrous materials under a variety of conditions. The G88 chipbreaker geometry promotes predictable chip segmentation, reducing clogging in continuous cuts and enabling higher average feed rates. For manufacturers seeking to optimise throughput without sacrificing surface quality, the combination of grade and chipformer supports more stable cutting and easier downstream handling of chips, contributing to a more economical machining process. For application support, availability or to discuss suitable holder combinations for the Walter Tools ADHT160616R-G88 WXN15 insert, contact Metav Werkzeuge for tailored advice and ordering assistance Technical Data SKU: ADHT160616R-G88-WXN15-WALTER Designation: ADHT160616R-G88 WXN15 Product type: Milling indexable insert Series: Walter N‑Sortensystem Manufacturer: Walter Tools Numbers / Core technical data Size designation: 16 Thickness designation: 06 Clearance angle: 15° Corner radius: 1.6 mm Plate form: Parallelogram 85° Special features / Versions Grade: WXN15 Chipbreaker: G88 Coating: Uncoated carbide Execution: T Tolerance class: H FAQ What materials is this insert intended for? The ADHT160616R-G88 WXN15 insert is specified for non‑ferrous metals (ISO group N), such as aluminium, copper and brass, where a very sharp, uncoated cutting edge is required. Is the insert coated or uncoated? This item is an uncoated carbide insert in the Walter N‑grade family, optimised for low adhesion when machining soft, non‑ferrous alloys. How does the G88 chipbreaker affect machining? The G88 chipformer promotes controlled chip segmentation, which helps prevent clogging and supports higher continuous feed rates in typical axial milling operations. Which geometry benefits axial milling applications? The parallelogram 85° form combined with a 15° clearance angle delivers stable cutting forces and improved chip flow, making it suitable for axial milling where good surface quality is required. Can this insert be used in heavy roughing operations? The insert’s 1.6 mm corner radius and sharp grade are geared towards finishing to medium cutting conditions in non‑ferrous materials; for heavy roughing in other material groups, alternative geometries or grades should be considered. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com