ADGT1204PER-D67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the high thermal stability and secure chip control of the Tiger·tec Gold WSM35G grade together with the stable parallelogram geometry for efficient milling of stainless steels and heat‑resistant alloys; order through Metav Werkzeuge or consult its technical team for cutting data and application support. ADGT1204PER-D67 WSM35G milling insert — Tiger·tec Gold, Walter Tools The ADGT1204PER-D67 WSM35G is a parallelogram milling insert designed for machining stainless steels and hard‑to‑cut superalloys in demanding production environments Tiger·tec Gold coated grade WSM35G Designed for stainless steels and superalloys Parallelogram form 85° with 15° clearance D67 chipbreaker for controlled chips Optimised for high‑alloy and stainless machining The combination of the Tiger·tec Gold coating and the WSM35G grade provides a balance of thermal resistance and abrasion control that is particularly effective on stainless steel and superalloys. Because these materials tend to work‑harden and generate elevated temperatures, the coated substrate maintains a stable cutting edge for longer tool life, reducing unscheduled tool changes and improving process consistency. The result is a measurable improvement in surface quality and repeatability during medium to heavy milling operations. Geometry that stabilises cutting and chip flow The parallelogram form with an 85° lead angle, paired with a 15° clearance, promotes gentle entry and stable engagement in the cut; vibrations are minimised and tool pressure is distributed more evenly. The D67 chipbreaker is engineered to produce short, controllable chips in interrupted or continuous cuts, which lowers the risk of chip packing and contributes to steady machining cycles. These geometric choices support higher machining reliability and predictable tool behaviour under varying depths of cut. Coating and substrate engineered for productivity A coated carbide substrate under the Tiger·tec Gold treatment provides enhanced heat shielding and wear resistance without sacrificing toughness. This technological combination supports higher cutting parameters where appropriate and reduces flank wear progression. For workshops targeting throughput improvements, the insert’s material pairing enables longer intervals between inspections and regrinds, translating into increased overall productivity and lower per‑component tooling cost in long runs. Typical applications and handling recommendations The insert is suited to shoulder milling, face milling and light slotting of stainless steels and heat‑resistant alloys where a robust edge and predictable chip form are required. The grade handles thermal loads and edge stress well, making it appropriate for moderate to heavy material removal rates and for use where part integrity under heat is critical. For best results, use a rigid toolholder, apply coolant strategies appropriate to the workpiece, and monitor edge condition; tailoring speeds and feeds to the workpiece and machine setup will preserve the cutting edge and maintain component quality. Contact Metav Werkzeuge for tailored cutting data, application advice and availability for Walter Tools ADGT1204PER-D67 WSM35G inserts Technical Data SKU: ADGT1204PER-D67-WSM35G-WALTER Designation: ADGT1204PER-D67 WSM35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Core dimensions & tolerances Insert size: 12 Thickness: 04 Clearance angle: 15° Insert form: Parallelogram 85° Tolerance class: G Chipformer: D67 Materials, coating & applications Grade / series: Tiger·tec Gold / WSM35G Substrate: coated carbide Suitable for: stainless steels (M), superalloys and titanium (S) Execution: T FAQ What materials is this insert intended to machine? The ADGT1204PER-D67 WSM35G milling insert from Walter Tools is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering stable edge life under high temperatures and tough cutting conditions. How does the Tiger·tec Gold treatment benefit machining? The Tiger·tec Gold layer improves thermal resistance and wear protection on the coated carbide substrate, which slows flank and crater wear and helps maintain a stable cutting edge during continuous and demanding milling operations. Which geometric features aid chip control and stability? The parallelogram form with an 85° lead, the 15° clearance, and the D67 chipbreaker combine to reduce vibration, ensure controlled chip formation and support predictable cutting forces across a range of depths of cut. Is the insert suitable for heavy material removal and interrupted cuts? Yes, the grade and geometry are intended to withstand higher loads and interruptions; the combination of a robust substrate and the D67 chipformer makes it appropriate for moderate to heavy milling applications where reliability is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is original and factory‑new from the manufacturer.
ADGT1204PER-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a milling insert that combines Tiger·tec Gold durability with reliable chip control and broad material capability; the result is reduced tool changes, consistent surface quality and a lower cost per component. Order directly via Metav Werkzeuge or consult our specialists for machining-specific recommendations. ADGT1204PER-D67 WSP45G milling indexable insert – Parallelogram 85°, 15° clearance the ADGT1204PER-D67 WSP45G milling insert is a PVD-coated carbide indexable insert designed for productive milling of steels, rostfreier Stahl and heat-resistant alloys in industrial machining Tiger·tec Gold coating for extended tool life Compatible with Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 15° clearance angle D67 chipbreaker for consistent chip control Insert size 12, thickness 04 Robust coating and economical performance for high-volume milling The Tiger·tec Gold coating combined with the WSP45G grade provides a balance of wear resistance and edge stability that lowers the frequency of insert changes. As a PVD-coated carbide grade engineered for milling, the compound resists abrasive and adhesive wear while maintaining a sharp cutting edge, which translates into a reduced cost per part in series production. The insert’s tolerance class G ensures predictable seating and repeatable results in multi-edge toolholders, supporting consistent cycle times and quality across production batches. Predictable chip formation and improved surface quality The D67 chipbreaker is engineered for reliable chip control when machining a wide range of materials, reducing the risk of entangling chips and minimising interruptions. Stable chip evacuation improves the machined surface and lowers rework rates, particularly when finishing or semi-finishing. The Parallelogram 85° geometry together with the 15° clearance angle offers a controlled entry angle that helps distribute cutting forces, improving tool life and promoting a consistent surface finish on workpieces made of Stahl, rostfreier Stahl and other challenging alloys. Versatile application range and handling recommendations Designed for general-purpose milling, this insert is suitable for operations where a combination of edge robustness and versatile performance is required. The grade supports machining of unalloyed and alloyed steels, rostfreier Stahl and heat-resistant superalloys, thanks to its thermal stability and optimised chip formation. The insert size 12 and thickness 04 make it compatible with common toolholders for shoulder and face milling tasks. For tailored feeds and speeds, testing under specific machine and clamping conditions is recommended; Metav Werkzeuge can provide machining guidance and cutting data to refine process parameters for maximum productivity. For reliable, high-productivity milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for application-specific advice and procurement assistance. Technical data Article number: ADGT1204PER-D67-WSP45G-WALTER Part designation: ADGT1204PER-D67 WSP45G SKU: ADGT1204PER-D67-WSP45G-WALTER Manufacturer: Walter Tools Core data Series: Tiger·tec Gold Grade/sort: WSP45G Applicable material groups: P / M / S Plate form: Parallelogramm 85° Free clearance angle: 15° Chipbreaker: D67 Special features Coating: Tiger·tec Gold (PVD-coated) Execution: T Plate size: 12 Plate thickness: 04 Tolerance class: G FAQ What materials can this insert machine effectively? The ADGT1204PER-D67 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys, reflecting the P / M / S designation of the Walter Tools Tiger·tec Gold range. How does the D67 chipbreaker affect chip control? The D67 chipbreaker on this milling insert promotes consistent chip formation and evacuation, which reduces interruptions and improves surface finish during continuous milling operations. Is this insert intended for finishing or roughing? The geometry and grade of this insert support finishing to medium machining tasks; the robust Tiger·tec Gold coating provides the durability required for higher productivity in mixed operation profiles. What does tolerance class G mean for clamping and repeatability? Tolerance class G indicates a manufacturing precision that supports secure seating in indexable toolholders, helping to achieve repeatable positioning and consistent results in series production. Can Metav Werkzeuge provide cutting data for this insert? Yes, Metav Werkzeuge can supply application-specific cutting recommendations to match machine, clamping and workpiece conditions for the ADGT1204PER-D67 WSP45G insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of the Walter AG group and is recognised for precision cutting solutions within the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered item is an original, factory-new product of the respective manufacturer.
ADGT1204PER-D67-WKP35S Wendeplatten - Walter Tools
ADGT1204PER-D67 WKP35S Fräswendeschneidplatte von Walter Tools ADGT1204PER-D67 WKP35S ist eine beschichtete Wendeschneidplatte aus der Serie Tiger·tec Silver, entwickelt für produktive Fräsprozesse an Stahl und Gusseisen Hohe Standzeit dank Tiger·tec Silver Beschichtung Für Stahl und Gusseisen nach ISO 513 ausgelegt Parallelogramm 85° Form für bessere Zugänglichkeit 15° Freiwinkel reduziert Schneidkräfte und Hitze Passend für Standardfräser mit 12 mm Plattenmaß Prozesssicherheit und Wirtschaftlichkeit gezielt verbessern Die beschichtete Sorte WKP35S kombiniert verschleißfestes Hartmetall mit der Tiger·tec Silver Beschichtung und sorgt so für konstante Werkzeugstandzeit bei der Zerspanung von Stahl und Gusseisen. Die bewusste Optimierung der Spanform durch den Spanbrecher D67 reduziert Schnittunterbrechungen und verringert Nachbearbeitungsaufwand, was direkt zur Senkung der Fertigungskosten beiträgt. Anwender profitieren von höherer Ausbringung ohne komplizierte Prozessanpassungen. Geometrie für Zugänglichkeit und Stabilität nutzen Die Parallelogramm 85° Form und der Freiwinkel von 15° ermöglichen schlanke Schnitte bei guter Zugänglichkeit an komplexen Konturen. Die Plattengröße 12 und die Plattendicke 04 unterstützen eine stabile Spannlage im Fräser und minimieren Vibrationen, was die Oberflächengüte verbessert. Durch die Kombination aus Geometrie und Beschichtung wird saubere Spanabfuhr bei wechselnden Schnittbedingungen erleichtert. Zielgruppe und typische Einsatzfelder Entwickelt für Produktionsbetriebe und Lohnfertiger, die Stahl und Gusseisen nach ISO 513 bearbeiten, eignet sich die Wendeplatte besonders für Schrupp- und Schlichtanwendungen mit mittleren bis hohen Schnittwerten. Die Ausführung T und die Toleranzklasse G gewährleisten reproduzierbare Einspannwerte, was die Programmieraufwände für Serienläufe reduziert. Die Platte ist damit eine wirtschaftliche Wahl für Serienfertigung und Einzelteilproduktion. Einfache Integration und Anwendungshinweise Die ADGT1204PER-D67 WKP35S lässt sich problemlos in gängige Frässysteme einbauen. Zur Prozessoptimierung empfiehlt sich die Abstimmung von Schnittdaten auf Werkstoff und Zerspanungsaufgabe; bei Bedarf steht technische Beratung zur Unterstützung der Parameterauswahl bereit. Bei Fragen hilft der Kundenservice gern weiter und liefert weiterführende Empfehlungen zur richtigen Schneidstoffwahl und zum Einsatz des Spanbrechers. Empfehlung: Die WKP35S Tiger·tec Silver Wendeschneidplatte direkt über Metav Werkzeuge anfragen und die Prozessvorteile für Stahl- und Gusseisenbearbeitung nutzen — eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: ADGT1204PER-D67-WKP35S-WALTER Marke: Walter Tools Serie: Tiger·tec Silver Produktart: Fräswendeschneidplatte Bezeichnung: ADGT1204PER-D67 WKP35S Ausführung: T Daten Freiwinkel: 15° Plattenform: Parallelogramm 85° Plattengröße: 12 Plattendicke: 04 Toleranzklasse: G Spanbrecher: D67 Besonderheiten Beschichtetes Hartmetall Sorte: WKP35S Sorteneinsatz: Stahl (P) und Gusseisen (K) P: Stahl, unlegierte und legierte Stähle K: Gusseisen, abrassiver Verschleiß und brechende Späne FAQ Ist die Platte für Schlicht- und Schruppbearbeitung geeignet? Die ADGT1204PER-D67 WKP35S von Walter Tools ist für Schrupp- und Schlichtanwendungen an Stahl und Gusseisen ausgelegt; die Tiger·tec Silver Beschichtung bietet hierbei eine gute Kombination aus Standzeit und Oberflächengüte. Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Primär sind Stahl und Gusseisen nach ISO 513 vorgesehen; die Sortenbezeichnung WKP35S signalisiert die Auslegung auf typische Wärmeentwicklung und Spanbildung dieser Werkstoffgruppen. Wie unterstützt der Spanbrecher D67 die Bearbeitung? Der Spanbrecher D67 formt kurze, kontrollierbare Späne bei Gusswerkstoffen und stabilisiert die Spanabfuhr bei Stahl, wodurch Prozessunterbrechungen reduziert werden. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1204PER-F56 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of thermal resistance, stable cutting-edge performance and controlled chip formation to maintain productive machining of stainless steel and heat‑resistant superalloys; order the ADGT1204PER‑F56 WSM35G insert directly via Metav Werkzeuge or consult the team for application-specific advice. ADGT1204PER‑F56 WSM35G Tiger·tec Gold indexable milling insert, Parallelogram 85°, 15° clearance – Walter Tools The ADGT1204PER‑F56 WSM35G is an indexable milling insert engineered for heavy‑duty milling of stainless steel and heat‑resistant superalloys, offering a coated carbide grade optimised for secure chip control and long tool life. Tiger·tec Gold coating for high heat resistance Optimised for stainless steel and superalloys Parallelogram 85° form for positive cutting geometry 15° clearance angle for reliable chip flow F56 chipbreaker for stable chip formation Durable grade and coating for demanding materials The WSM35G grade from the Tiger·tec Gold series combines a hard, wear‑resistant substrate with a multi‑layer coating designed to withstand high temperatures and abrasive conditions. This technical combination supports a stable cutting edge when machining ISO group M and S materials (stainless steel; heat‑resistant superalloys and titanium), reducing the tendency for built‑up edge and premature flank wear. For production environments that prioritise consistent component quality, the coated carbide reduces unplanned tool changes and contributes to a lower cost per part while maintaining surface integrity. Geometry and chip control that improve process stability The Parallelogram 85° form plus a 15° clearance provides a positive engagement that favours smoother cutting forces and predictable chip formation. The integrated F56 chipbreaker is optimised to generate short, controllable chips even under the heavy cutting conditions typical for these materials, which supports safe evacuation and reduces the risk of rework. The plate thickness (04) and size 12 yield mechanical robustness and compatibility with common milling cutter bodies; the resulting combination enhances surface finish and reduces vibration in both roughing and semi‑finishing operations. Designed for reproducible productivity and easy integration Specified with tolerance class G, this insert meets stringent dimensional standards for repeatable positioning and reliable tool life across toolholders. Its application focus on stainless steel and high‑temperature alloys makes it a pragmatic choice for manufacturers seeking a single insert grade for a range of demanding jobs. The insert supports higher cutting speeds and steady metal removal rates where heat resistance and edge stability are decisive — a rational investment that pays off through fewer stops, less scrap and improved throughput. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and secure tailored recommendations for machining stainless steel and superalloys with the ADGT1204PER‑F56 WSM35G. Technical data Article number: ADGT1204PER‑F56‑WSM35G‑WALTER Product type: Fräswendeschneidplatte (indexable milling insert) Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Facts Clearance angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Chipbreaker: F56 Tolerance class: G Special features Coating: Tiger·tec Gold Material compatibility: S / M (superalloys/titanium and stainless steel) Designed for heavy‑duty and difficult‑to‑machine materials Positive cutting geometry for stable cutting edge FAQ What materials is this insert intended for? The ADGT1204PER‑F56 WSM35G is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering wear resistance and edge stability for these challenging materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WSM35G grade increases thermal stability and wear resistance, enabling higher cutting speeds and longer tool life when machining stainless steel and superalloys. Which cutter geometries suit this insert best? The Parallelogram 85° form and 15° clearance make the ADGT1204PER‑F56‑WSM35G particularly suitable for face and profile milling applications where positive cutting angles and controlled chip flow are required. Can this insert be used for finishing operations? Yes; depending on cutting parameters and toolholder rigidity, the ADGT1204PER‑F56 WSM35G can achieve good surface quality in semi‑finishing and finishing passes, thanks to its stable cutting edge and the F56 chipbreaker. What does tolerance class G mean for production? Tolerance class G indicates tight dimensional consistency for the ADGT1204PER‑F56 WSM35G, supporting reproducible insert seating and predictable tool behaviour across multiple tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification only and do not indicate any affiliation. The offered article is original, brand‑new merchandise from the respective manufacturer (Walter Tools).
ADGT1204PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the versatile WSP45G grade and reliable F56 chip control to maintain productive milling cycles with consistent tool life; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. ADGT1204PER-F56 WSP45G — Walter Tools milling insert with Tiger·tec Gold coating, 15° relief for steel, stainless steel and superalloys The ADGT1204PER-F56 WSP45G is a parallelogram 85° milling insert designed for versatile face and shoulder milling applications in demanding materials Tiger·tec Gold PVD-coated carbide grade WSP45G Parallelogram 85° shape with 15° relief Suitable for steel, stainless steel and superalloys Stable chip control with F56 chipbreaker Increase milling productivity with wear‑resistant Tiger·tec Gold The combination of the Tiger·tec Gold coating and the WSP45G grade provides a wear‑resistant cutting edge that extends tool life and reduces downtime. Designed as a PVD-coated carbide, this insert offers improved adhesion of the coating to the substrate, which helps maintain a stable cutting edge under high thermal loads. As a result, machining cycles become more predictable and productive: fewer indexings and longer intervals between tool changes translate into measurable process efficiency. Reliable performance across challenging material groups This insert is developed for the ISO material groups P, M and S, meaning reliable machining of steel, stainless steel and heat‑resistant superalloys or titanium. The grade's toughness supports secure chip formation when cutting workpieces that generate high temperatures or tend to form long, stringy chips. For production environments that handle mixed batches, the insert’s versatility reduces the need for multiple specialised grades and simplifies tool management while maintaining consistent surface quality and dimensional control. Geometry and chip control for consistent surface finish The parallelogram 85° shape combined with a 15° relief angle produces a favourable cutting geometry for shoulder and ramp milling, improving accessibility and cutting stability. The integrated F56 chipbreaker is tuned for reliable chip segmentation and evacuation, which reduces the risk of re-cutting and surface damage. With an insert size of 12 and thickness 04, the geometry offers a balance between rigidity and accessibility, supporting a steady cutting process and longer tool life in everyday milling tasks with moderate to heavy engagement. Contact Metav Werkzeuge for tailored cutting data and machining recommendations on Walter Tools Tiger·tec Gold inserts to ensure optimal process setup and maximise throughput Technical Data Article number: ADGT1204PER-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT1204PER-F56 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Facts Relief angle: 15° Shape angle: Parallelogram 85° Insert size: 12 Thickness: 04 Tolerance class: G Special features Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Applicable material groups: P (steel), M (stainless steel), S (superalloys & titanium) Execution: T Designed for face and shoulder milling FAQ Is this insert suitable for stainless steel milling? Yes. The ADGT1204PER-F56 WSP45G grade is formulated for ISO group M and supports secure chip formation and stable edges when machining stainless steel. What does the F56 chipbreaker achieve? The F56 chipbreaker on the ADGT1204PER-F56 WSP45G promotes consistent chip segmentation and evacuation, reducing re-cutting and improving surface finish during milling. Why is Tiger·tec Gold beneficial for production runs? Tiger·tec Gold coating enhances wear resistance and thermal stability of the cutting edge, helping to extend tool life and keep production cycles predictable when using the ADGT1204PER-F56 WSP45G insert. Which workpiece materials are covered by P, M and S designations? P denotes steel, M denotes stainless steel and S denotes heat‑resistant superalloys and titanium; the ADGT1204PER-F56 WSP45G is suitable across all three groups for versatile milling tasks. How does the parallelogram 85° geometry affect milling performance? The parallelogram 85° shape improves cutter engagement for shoulder and ramp milling, offering good accessibility and stable cutting forces that contribute to consistent surface quality with the ADGT1204PER-F56 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for clarification. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer, Walter Tools.
ADGT1204PER-G77 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of a wear-resistant grade, a stabilising chipbreaker and positive geometry delivers consistent performance in difficult-to-machine alloys; reliable surface finish and extended tool life reduce downtime. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. ADGT1204PER-G77 WSM35G – Indexable milling insert for rostfreier Stahl and superalloys (Parallelogram 85°, 15° relief) by Walter Tools ADGT1204PER-G77 WSM35G is a coated indexable milling insert designed for heavy-duty roughing and semi-finishing of rostfreier Stahl and heat-resistant superalloys in demanding production environments Tiger·tec Gold coating technology Optimised for rostfreier Stahl and superalloys Parallelogram 85° cutting geometry 15° relief and G77 chipbreaker High-performance grade for demanding materials The WSM35G grade, part of the Tiger·tec Gold family, is a coated carbide composition engineered for machining tough alloys. Its formulation emphasises thermal stability and a stable cutting edge, which lowers the risk of build-up on the flank and supports predictable flank wear progression. For process planners this means fewer unexpected regrinds and more constant part quality, while production engineers benefit from reduced tool change frequency and improved overall equipment effectiveness. Geometry that stabilises cutting and improves surface quality The insert’s parallelogram 85° shape combined with a 15° relief provides a positive cutting attitude that reduces cutting forces and supports consistent chip formation. The integrated chipbreaker G77 is tailored to the grade and geometry to control long, stringy chips typical of high-temperature alloys. The net effect is enhanced process security and improved surface finish on each pass, making the tooling choice particularly suitable for interrupted cuts and trochoidal strategies where stable chip evacuation is essential. Suitable applications and practical handling Marked for material groups S / M, the insert is intended for performance in both rostfreier Stahl and nickel-/cobalt-based superalloys under ISO 513 classifications. The combination of coated carbide and dedicated chip control is aimed at workshops and subcontractors that require consistently repeatable results across batches. For specification checks or to verify suitability with a particular spindle speed or feed strategy, Metav Werkzeuge’s technical advisers can provide data sheets and cutting parameter recommendations to support safe integration into existing tool holders. Contact Metav Werkzeuge for tailored advice on Walter Tools ADGT1204PER-G77 WSM35G, application recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADGT1204PER-G77-WSM35G-WALTER Product designation: ADGT1204PER-G77 WSM35G Brand: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Execution: T Shape: Parallelogramm 85° Facts Relief angle: 15° Size: 12 Thickness: 04 Tolerance class: G Design & special features Coating technology: Tiger·tec Gold Carbide type: coated carbide Chipbreaker: G77 Material groups: S / M Typical application: rostfreier Stahl and heat-resistant superalloys FAQ What materials is the insert suitable for? The ADGT1204PER-G77 WSM35G is specified for material groups S and M, which covers heat-resistant superalloys and rostfreier Stahl according to ISO 513. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and supports stable edge retention, helping the insert maintain cutting performance during prolonged operation. Which cutting conditions suit the parallelogram 85° geometry? The parallelogram 85° form combined with a 15° relief is effective for medium to heavy axial engagement and interrupted cuts; the geometry reduces radial cutting forces and encourages steady chip flow. What benefit does the G77 chipbreaker provide? The chipbreaker G77 promotes reliable chip segmentation and evacuation for long-chipping alloys, reducing the likelihood of entanglement and improving operator safety and surface finish. Is this insert suitable for trochoidal milling strategies? Yes, the positive geometry and chip control features of this insert support trochoidal and high-engagement strategies where continuous chip control and edge stability are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is recognised as a global provider of precision tooling with strong emphasis on productivity and cutting-edge material technology. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any connection between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
ADGT1204PER-G77 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSP45G carbide grade for extended edge life and reliable chip control; the geometry and 15° clearance deliver stable milling across demanding materials such as Stahl and rostfreier Stahl. Order or request application advice through Metav Werkzeuge for a rapid supply decision. ADGT1204PER-G77 WSP45G milling indexable insert — Tiger·tec Gold PVD, 15° clearance (Walter Tools) An ADGT1204PER-G77 WSP45G milling insert engineered for stable edge life and versatile face and slot milling of Stahl, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating for long tool life Versatile for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 15° clearance Improved cycle times through durable coating and grade The combination of the Tiger·tec Gold coating and the WSP45G PVD-coated carbide grade provides a measurable improvement in wear resistance and cutting-edge stability. This results in more consistent component tolerances and fewer indexings per job, which directly improves machining throughput. The PVD layer supports elevated cutting parameters while the substrate maintains toughness; together this reduces flank wear and extends effective tool life, lowering the effective cost per finished part. Reliable performance across challenging materials Designed for the ISO groups P / M / S, the insert covers unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. The WSP45G grade is formulated to balance toughness and heat resistance: for steels it supports controlled chip formation under typical thermal loads, for stainless steels it combats build-up edge tendencies, and for superalloys it preserves edge integrity under poor thermal conductivity. This breadth of capability makes the insert suited to mixed-production environments and flexible job scheduling. Geometry that enhances process stability and surface finish The Parallelogram 85° shape combined with a 15° clearance angle produces a stable cutting contact that reduces radial forces and improves part geometry accuracy. The integrated G77 chipbreaker fosters predictable swarf control, facilitating safe evacuation at moderate to high feeds and helping to achieve consistent surface quality without secondary finishing. The compact plate size and a slim 04 thickness enable tight-tooling arrangements and minimise tool overhang where rigidity matters. Practical integration and economic benefits in the toolroom The insert is supplied in the ADGT1204PER-G77 designation for straightforward identification and replacement in established toolholders. Its versatility reduces tooling variants held in inventory and supports leaner tool rollouts for mixed-material contracts. Proven for productive milling operations, the grade also contributes to fewer workpiece rejects and steadier cycle times. For application-specific process windows and recommended cutting data, technical consultation is available to match speeds and feeds to machine dynamics and job requirements. For process-stable milling with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for application advice or to check stock and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADGT1204PER-G77-WSP45G-WALTER Item: Fräswendeschneidplatte ADGT1204PER-G77 WSP45G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: G77 Applicable materials: P / M / S Execution: T FAQ What materials can this insert machine effectively? The ADGT1204PER-G77 WSP45G insert is designed for ISO groups P, M and S, enabling machining of Stahl, rostfreier Stahl and heat-resistant superalloys. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold reduces wear and supports higher cutting parameters; the coating on the WSP45G grade extends edge life and improves process stability under continuous production. Is the Parallelogram 85° geometry suitable for slotting? The Parallelogram 85° form provides a controlled cutting engagement that is appropriate for many face and slot milling operations while preserving stability and surface quality. What role does the G77 chipbreaker play in machining? The G77 chipbreaker promotes predictable chip formation and evacuation, lowering the risk of entanglement and helping to maintain consistent surface finish during moderate to high feed milling. How is the insert identified for replacement and tool management? The designation ADGT1204PER-G77 WSP45G identifies the geometry, chipbreaker and grade, simplifying reordering and tool inventory management for production planning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT160612R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear resistance and the versatile WSP45G grade to ensure stable, repeatable milling of steels and high-temperature alloys; benefit from precise geometry and controlled chip formation for high productivity. Order directly via Metav Werkzeuge or consult the team for application advice and availability. ADGT160612R-F56 WSP45G milling insert (Parallelogram 85°, 15° clearance) by Walter Tools A high-performance milling insert, ADGT160612R-F56 WSP45G, optimised for versatile milling of steel, stainless steel and heat‑resistant alloys in production environments Tiger·tec Gold PVD coating for extended tool life Suitable for steel, stainless steel and superalloys Parallelogram 85° shape with 15° clearance Stable chip control with F56 chipbreaker Consistent edge life through Tiger·tec Gold technology The combination of the WSP45G grade and the Tiger·tec Gold coating delivers a PVD‑coated cemented carbide that is engineered for durability and stable cutting-edge behaviour. This results in fewer index changes and longer tool cycles, which supports predictable production planning and lowers per‑part machining cost. The coating and substrate pairing is designed to manage the heat and mechanical loads typical of milling operations on steels and stainless materials, providing improved resistance to flank wear and chipping. Controlled chips and surface quality for reliable throughput The F56 chipbreaker together with the parallelogram geometry and 15° clearance promotes consistent chip formation and evacuation. A steady chip flow reduces rework and minimises the risk of built-up edge that can degrade finished surfaces. The insert’s corner radius of 1.2 mm balances edge strength and surface finish, enabling operators to maintain high feed rates without sacrificing component quality. These geometric choices translate directly into fewer interruptions and a more reliable machining process. Broad material capability for flexible job shops and production lines Designed for the P/M/S material groups, this insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium alloys. The WSP45G grade is a tough, versatile PVD variant tailored to the demands of such materials, offering a compromise between wear resistance and edge stability. Using a single insert family across different component types simplifies inventory and speeds up job changeovers, making it especially practical for mixed‑model production or job shops handling diverse materials. Process security and productivity with industrial geometry The insert’s parallelogram 85° form and the defined tolerance class G support repeatable seating and accurate positioning in standard milling cutters. Robust geometry and the Walter Tools manufacturing standard contribute to stable cutting forces and reproducible results. Where cycle times and surface integrity matter, the combination of grade, chipbreaker and form supports a process‑orientated approach: fewer variances in tool life, predictable maintenance intervals and a reliable baseline for optimising cutting parameters. Contact Metav Werkzeuge for tailored application support on Walter Tools milling solutions, technical data requests and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: ADGT160612R-F56-WSP45G-WALTER Designation: ADGT160612R-F56 WSP45G Brand: Walter Tools Facts Size: 16 Thickness: 06 Corner radius: 1.2 Clearance angle: 15° Shape: Parallelogram 85° Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (PVD‑coated cemented carbide) Chipbreaker: F56 Material application groups: P / M / S Execution: T FAQ What materials can this insert machine effectively? The insert is intended for machining steel, stainless steel and heat‑resistant superalloys (P / M / S); the WSP45G grade and Tiger·tec Gold coating support secure chip formation and edge life on these groups. How does the F56 chipbreaker affect milling performance? The F56 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built‑up edge during milling with the ADGT160612R‑F56 WSP45G insert. Is this insert compatible with standard milling cutters for parallelogram inserts? Yes, the geometry is a parallelogram 85° form and is manufactured to tolerance class G, supporting correct seating in compatible milling cutter bodies designed for this insert family. What advantages does the Tiger·tec Gold series offer in production? The Tiger·tec Gold series provides a balanced PVD coating system that enhances wear resistance and thermal stability, extending tool life and improving process reliability for repeated production runs. Can the insert be used for roughing as well as finishing? With its 1.2 mm corner radius and robust grade, the insert suits a range of strategies from semi‑finishing to roughing, depending on chosen feeds and depths of cut; selection should follow the machining plan and component tolerance requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the stated manufacturer.
ADGT160616R-D67 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the versatile WSP45G grade to achieve stable chip control and extended tool life during demanding milling operations; order directly via Metav Werkzeuge or consult our specialists for application guidance. ADGT160616R-D67 WSP45G – milling insert, Tiger·tec Gold, parallelogram 85° (Walter Tools) The ADGT160616R-D67 WSP45G is a PVD-coated carbide milling insert designed for versatile operations across steels, stainless steels and heat-resistant alloys, optimised for reliable chip control and consistent finishing. Tiger·tec Gold coating for extended tool life Versatile for P / M / S material groups Parallelogram 85° shape for stable engagement 1.6 mm corner radius for improved surface quality High-performance cutting for steels, stainless steels and superalloys The combination of WSP45G grade and Tiger·tec Gold surface technology delivers a PVD-coated carbide cutting edge that balances toughness and wear resistance. This composition is tailored to the thermal and mechanical loads encountered when machining P / M / S material groups, meaning improved process reliability in mixed production environments. The insert’s tough substrate and thin, adherent coating reduce the tendency for build-up and edge degradation, which supports longer intervals between tool changes and therefore higher overall productivity. Geometry that secures consistent surface quality and tool life A parallelogram 85° form combined with a 1.6 mm corner radius and a 15° relief angle provides a geometry that stabilises engagement and distributes cutting forces evenly. This results in lower vibration and a more uniform chip flow, with direct benefits for consistent surface quality and reduced cycle-time variation. The form also supports predictable wear patterns, which simplifies process planning and makes repeatable finishes easier to achieve in serial milling tasks. Coating and chip control for economical milling The dedicated D67 chipbreaker is matched to the insert geometry and coating, promoting controlled chip formation across a broad range of feeds and depths of cut. This yields efficient evacuation and safer machining in thin-walled or interrupted cuts. Together with the Tiger·tec Gold treatment, the insert demonstrates enhanced resistance to abrasive and adhesive wear, contributing to a lower cost per component and dependable performance in production settings. As a Walter Tools solution, the insert supports standardised tool setups and consistent output across batches. Contact Metav Werkzeuge for tailored application advice and to discuss supply options for Walter Tools Tiger·tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: ADGT160616R-D67-WSP45G-WALTER Designation: ADGT160616R-D67 WSP45G Product type: milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Shape: parallelogram 85° Applicable material groups: P / M / S Chipbreaker: D67 Execution: T Core measurements Corner radius: 1.6 mm Relief angle: 15° Insert size: 16 Thickness code: 06 Tolerance class: G Special features PVD-coated carbide (coated cemented carbide) Suitable for steel, stainless steel, superalloys and titanium Parallelogram 85° form for stable engagement Chipbreaker D67 for controlled chips Tiger·tec Gold coating technology Versatile milling applications FAQ Which materials can be machined with this insert? The ADGT160616R-D67 WSP45G insert is specified for P / M / S material groups, covering steels, rostfreie Stähle (stainless steels) and heat-resistant superalloys or titanium. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal stability; with the ADGT160616R-D67 WSP45G this coating improves edge life and supports stable performance under elevated cutting temperatures. What does the D67 chipbreaker do? The D67 chipbreaker is engineered for controlled chip formation and evacuation, reducing the risk of chip-related interruptions and contributing to consistent surface finish when milling. How does the parallelogram 85° geometry help in milling? The parallelogram 85° form increases engagement stability and distributes cutting forces, lowering vibration and improving repeatability and surface quality in slotting and face milling operations. Is this insert suitable for interrupted cuts or thin-walled parts? Yes; the combination of a robust substrate, Tiger·tec Gold coating and the D67 chipbreaker makes the ADGT160616R-D67 WSP45G suitable for applications with interrupted cuts and where secure chip control is required. Manufacturer: Walter Tools; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the listed manufacturers. The offered article is original, brand-new merchandise from the manufacturer.
ADGT160616R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, robust WSP45G grade and precision parallelogram geometry for consistent milling performance across demanding materials. Order the ADGT160616R‑F56 WSP45G insert directly via Metav Werkzeuge or consult our specialists for tailored machining advice. ADGT160616R-F56 WSP45G — Fräswendeschneidplatte (milling indexable insert), Tiger·tec Gold, for Steel / Stainless / Superalloys — Walter Tools ADGT160616R‑F56 WSP45G is a versatile milling indexable insert designed for general and demanding milling applications on Steel, stainless steel and heat‑resistant superalloys; suitable for operations requiring stable chip formation and reliable edge life. Tiger·tec Gold PVD coating Versatile for Steel, stainless steel, superalloys Parallelogram 85° form for stable milling 15° relief angle with 1.6 mm corner radius Durable coating and grade for longer tool life The combination of the Tiger·tec Gold series and the WSP45G grade provides a PVD‑coated cemented carbide substrate engineered for toughness and wear resistance. This configuration supports stable chip control under variable cutting conditions and reduces flank and crater wear, which helps to extend service intervals. For operations in both intermittent and continuous cuts, the result is predictable tool life and fewer tool changes, improving overall process efficiency. Geometry engineered for stability and surface quality The parallelogram 85° insert form, paired with a 15° relief angle, reduces radial forces during side milling and contributes to a more balanced load distribution on the cutting edge. The 1.6 mm corner radius strengthens the tip against mechanical and thermal shock while contributing to improved surface finish on workpieces. These geometric choices make the insert suitable for applications where both dimensional stability and surface integrity are required, such as semi‑finishing and finishing passes on shafts and contoured components. Application range and process benefits Designed for machining groups P, M and S, this insert is appropriate for unalloyed and alloyed Steel, stainless steel and superalloys/titanium. The material compatibility and the robust chipbreaker designation (F56) assist in achieving secure chip formation even under the higher temperatures and sticky chip tendencies of stainless and heat‑resistant alloys. In production, this translates to fewer interruptions, more consistent cycle times and better reproducibility from batch to batch. Contact Metav Werkzeuge today to specify the ADGT160616R-F56 WSP45G insert from Walter Tools for production‑critical milling — our technical advisers will recommend the optimal grade and holder for the intended application. Technical data SKU: ADGT160616R-F56-WSP45G-WALTER Designation: ADGT160616R-F56 WSP45G Manufacturer: Walter Tools Facts Size: 16 mm Corner radius: 1.6 mm Relief angle: 15° Thickness: 06 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F56 Geometry: Parallelogram 85° Material: PVD‑coated cemented carbide Execution: T Applicable materials: Steel, stainless steel, superalloys/titanium FAQ What materials can be machined with this insert? The ADGT160616R‑F56 WSP45G insert from Walter Tools is specified for groups P, M and S — namely Steel, stainless steel and heat‑resistant superalloys/titanium. Which machining tasks suit this insert best? Its parallelogram geometry and 1.6 mm corner radius make the insert well suited to semi‑finishing and finishing operations where stable cutting forces and good surface quality are priorities. How does the Tiger·tec Gold series improve performance? The Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and edge stability, resulting in longer tool life and more consistent machining results. Is the chipbreaker suitable for stainless and heat‑resistant alloys? Yes; the F56 chipbreaker supports secure chip control under the thermal and material tendencies of stainless steels and superalloys, reducing the risk of built‑up edge and unstable chips. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the referenced manufacturers. The offered article is an original, brand‑new product of the manufacturer.
ADGT160620R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from high cutting stability and reliable chip control thanks to the Tiger·tec Gold coating and the WSP45G carbide grade; ideal for productive milling of steel, stainless steel and heat‑resistant alloys. Order the ADGT160620R-F56 WSP45G directly via Metav Werkzeuge or ask the consultants for process recommendations. ADGT160620R-F56 WSP45G – Indexable milling insert with Tiger·tec Gold coating, 2 mm corner radius (Walter Tools) The ADGT160620R-F56 WSP45G is a parallelogram 85° indexable milling insert engineered for versatile face and shoulder milling in steels, stainless steels and heat‑resistant superalloys. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° form, 15° clearance 2 mm corner radius for improved edge strength Achieve higher process efficiency with a PVD‑coated grade The Tiger·tec Gold PVD coating combined with the WSP45G grade delivers consistent wear resistance and prolonged tool life under interrupted and continuous milling. The selected coating technology reduces friction and supports stable cutting temperatures, which in turn enables higher cutting parameters and improved throughput. The integrated chipbreaker F56 promotes predictable chip formation, reducing rework and machine downtime while supporting efficient material removal rates. Stable cutting edge for demanding materials Designed for the thermal and mechanical stresses of machining P / M / S materials, the insert ensures a robust cutting edge when working with unalloyed and alloyed steel, tougher stainless steel grades and high‑temperature superalloys. The 2 mm corner radius enhances resistance to edge chipping, while the 15° clearance angle reduces rubbing on the flank face. Together these design elements provide edge stability and reproducible surface quality, helping to safeguard component tolerances and minimise scrap. Geometry that supports flexible process planning The parallelogram 85° form offers advantageous approach angles for a range of milling strategies, giving process planners the ability to balance axial and radial engagement without changing tooling. The consistent tolerance class G and execution T support interchangeability in multi‑op setups and make tool management straightforward. This geometry benefits shops aiming for quick tool index changes and steady cycle times across batches. Clear material guidance and application scope The insert is specified for machining the ISO material groups indicated by P (steel), M (stainless steels) and S (heat‑resistant superalloys and titanium). For workshop engineers and production managers, this means a single grade can cover a broad mix of parts, reducing tool variants in stock and simplifying procurement. For less experienced staff, the grade’s balanced toughness and wear resistance provide a forgiving performance window during process development. Contact Metav Werkzeuge for application advice, availability and tailored recommendations on Walter Tools Tiger·tec Gold inserts such as the ADGT160620R-F56 WSP45G Technical data Article number: ADGT160620R-F56-WSP45G-WALTER Designation: ADGT160620R-F56 WSP45G Product type: Indexable milling insert (fräswendeschneidplatte) Series: Tiger‑tec Gold Grade: WSP45G Core specifications Clearance angle: 15° Corner radius: 2 mm Insert form: Parallelogram 85° Insert size: 16 Thickness: 06 Chipbreaker: F56 Tolerance class: G Execution: T Materials & features Coating: Tiger·tec Gold (PVD) Material suitability: P / M / S (steel, stainless steel, superalloys) Intended use: Milling applications Manufacturer: Walter Tools SKU: ADGT160620R-F56-WSP45G-WALTER FAQ What materials are suitable for this insert? The insert is suitable for machining the ISO groups P, M and S, meaning steel, stainless steels and heat‑resistant superalloys; the WSP45G grade and Tiger·tec Gold coating are tuned for these materials. How does the chipbreaker F56 help in production? Chipbreaker F56 on the ADGT160620R‑F56 WSP45G improves chip formation and evacuation, supporting stable cutting forces and reducing the risk of chip‑related interruptions in milling operations. Is the insert available in different tolerances or executions? This item is supplied in tolerance class G and execution T as specified; alternative executions or tolerance grades may be available through Metav Werkzeuge on request. What advantages does the parallelogram 85° form provide? The 85° parallelogram form offers versatile cutting angles for face and shoulder milling, allowing optimisation of radial and axial engagements without extensive fixture changes. Can this insert be used for high‑speed milling? The combination of Tiger·tec Gold coating and the WSP45G grade supports elevated cutting parameters compared with uncoated grades; suitability for specific high‑speed applications should be confirmed with cutting data from Metav Werkzeuge. Manufacturer/Responsible: Walter Tools; part of Walter AG; Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT160632R-F56 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the versatile WSP45G grade and the 15° clearance angle for efficient, stable milling; these features support consistent chip control and extended tool life. Order the ADGT160632R-F56 WSP45G milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. ADGT160632R-F56 WSP45G milling indexable insert — Parallelogram 85°, 3.2 mm corner radius (Walter Tools) ADGT160632R-F56 WSP45G is a robust, coated milling insert designed for general and demanding milling applications, featuring Tiger‑tec Gold technology for improved edge stability and wear resistance Tiger·tec Gold coated grade WSP45G For P / M / S materials (Stahl, rostfreier Stahl, superalloys) Parallelogram 85° shape, 3.2 mm corner radius Positive relief 15° for stable chip formation Durable coating and measurable wear resistance for longer tool life The Tiger‑tec Gold coating applied to this insert produces a hard, wear‑resistant surface that reduces flank wear under cyclic thermal loads. As a WSP45G sort, the insert combines a tough substrate with a PVD coating to balance edge toughness and abrasion resistance, which results in fewer indexings and longer effective life in interrupted or varying cut conditions. This means more predictable tool change intervals and improved process economy in production environments handling mixed batches. Geometry designed to secure chip control and surface quality The parallelogram 85° platform and 3.2 mm corner radius provide a compromise between strength and edge engagement: the angle distributes cutting forces across a larger area while the corner radius supports a stable cutting edge for fine surface finishes. The positive clearance angle of 15° reduces rubbing and minimises built‑up edge tendencies, particularly when machining heat‑generating materials. These geometric choices translate into consistent surface integrity and reduced load peaks on the tool holder. Proven versatility across common industrial materials This grade is developed for P / M / S applications: P for a wide range of Stahl, M for rostfreier Stahl, and S for heat‑resistant superalloys and titanium. The combination of substrate and coating supports secure chip formation when cutting ductile steels as well as tougher, high‑temperature alloys. For operations where material mixes occur on a single job, the insert offers a pragmatic solution that can reduce tool inventory while maintaining reliable performance and repeatability. Practical use and integration into production workflows The insert’s form and indexable design enable straightforward seat and clamp compatibility in standard toolholders for parallelogram inserts, speeding up regrinds and index changes. The F56 chipbreaker characteristic promotes segmented chips and smoother evacuation in medium to heavy milling passes. For process planners, the balanced feature set facilitates optimisation of cutting speeds and feeds to achieve either higher metal removal rates or improved surface finish, depending on the priority. Contact Metav Werkzeuge for tailored selection advice on Walter Tools Tiger‑tec Gold inserts and ensure the right insert geometry and grade are chosen for the intended application Technical Data Article number / SKU: ADGT160632R-F56-WSP45G-WALTER Designation: ADGT160632R-F56 WSP45G Label: Fräswendeschneidplatte ADGT160632R-F56 WSP45G Walter Tools Facts Relief angle: 15° Corner radius: 3.2 mm Plate size: 16 Plate thickness: 06 Special features Series / Technology: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Plate form: Parallelogram 85° Substrate / coating: coated cemented carbide (PVD technology) Material suitability: P / M / S (Stahl; rostfreier Stahl; heat‑resistant superalloys and titanium) Tolerance class: G Execution: T Manufacturer: Walter Tools FAQ Which materials can be machined with this insert? The insert is suitable for P / M / S groups; it machines Stahl, rostfreier Stahl and heat‑resistant superalloys or titanium reliably when using appropriate cutting parameters. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold technology on this insert improves wear resistance and edge stability, enhancing lifetime and reducing unplanned index changes in mixed‑material production. How does the 85° parallelogram shape affect milling performance? The parallelogram 85° form offers stable clamping and favourable force distribution, promoting better chip control and consistent surface quality during side and face milling. Is the ADGT160632R-F56 WSP45G suited to interrupted cuts? Yes, the combination of a tough substrate and PVD coating in the WSP45G grade provides resilience against impact and thermal shock typical of interrupted milling. What does the F56 chipbreaker mean for chip formation? The F56 chipbreaker is engineered for segmented chips and smooth evacuation in medium to heavy passes, supporting reliable machining without frequent clearance issues. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
ADGT160640R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold PVD grade, stable chip control and a parallelogram geometry with 15° relief for consistent milling performance. Order the ADGT160640R‑F56 WSP45G through Metav Werkzeuge or consult our specialists for cutting-parameter recommendations. ADGT160640R-F56 WSP45G indexable milling insert – Tiger‑tec Gold, P/M/S applications – Walter Tools ADGT160640R-F56 WSP45G is a coated carbide indexable milling insert designed for versatile face and profile milling across steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD-coated carbide grade Suitable for steel, stainless steel, superalloys Parallelogram 85° form with 15° relief Reliable process stability for mixed production runs The Tiger‑tec Gold grade delivers a balance of toughness and wear resistance tailored to frequent interruptions and batch variety. As a PVD‑coated carbide grade, the insert supports consistent edge life when machining steel, stainless steel and high‑temperature alloys, reducing tool changes and downtime. This leads to improved cycle times and predictable productivity in mixed‑material shops. Where chip formation is critical, the grade’s coating enhances heat resistance and wear control without compromising toughness. Controlled chips and secure cutting edges for safer cycles A defined chipbreaker designation and the insert’s geometry combine to provide stable chip control and a secure cutting edge. The chipbreaker F56 and the parallelogram 85° plate form direct chips reliably away from the cutting zone, lowering the risk of recutting and improving surface integrity. For operators less familiar with indexable milling terminology: a chipbreaker is a relief geometry that breaks and guides the metal swarf to prevent long, entangling chips and to protect the cutting edge during interrupted cuts. Geometry and angles designed for consistent surface quality The insert’s 15° relief angle and a corner radius of 4 contribute to a predictable cutting engagement and repeatable surface finish. The relief angle reduces rubbing on the flank, while the corner radius helps distribute cutting forces and extend edge life. These geometric choices translate into fewer rework operations and steadier dimensional accuracy — advantages that matter on components requiring tight tolerances or repeatable finishes. Application guidance and machining advantages This grade is specified for groups P, M and S according to ISO classifications, meaning it is suitable for unalloyed and alloyed steel, rostfreier Stahl (stainless steel) and heat‑resistant superalloys and titanium. The insert is available in the ADGT160640R‑F56 configuration with the WSP45G grade, offering a practical solution for job shops and production environments seeking a versatile milling option. For best results, pair the insert with appropriate cutting data for each material group and a holder compatible with a parallelogram 85° insert form. Contact Metav Werkzeuge for tailored cutting parameters, batch recommendations or a technical quotation for Walter Tools Tiger‑tec Gold inserts Technical data Article number: ADGT160640R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT160640R-F56 WSP45G Walter Tools Product type: Fräswendeschneidplatte / Indexable milling insert Manufacturer: Walter Tools Grade/series: Tiger‑tec Gold / WSP45G Chipbreaker: F56 Facts Relief angle: 15° Corner radius: 4 Plate form: Parallelogram 85° Plate size: 16 Thickness code: 06 Tolerance class: G Special features PVD‑coated carbide grade Suitable for material groups P / M / S (steel, stainless steel, superalloys/titanium) Robust chip control for interrupted cuts Designed for consistent edge life and repeatable surface quality FAQ What materials can this insert machine effectively? The ADGT160640R‑F56 WSP45G grade is formulated for ISO groups P, M and S, making it suitable for machining steel, stainless steel and heat‑resistant superalloys or titanium. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold’s PVD coating enhances heat and wear resistance while preserving toughness, so the insert maintains cutting performance and delivers predictable tool life under varying cutting conditions. What does the chipbreaker F56 do? The F56 chipbreaker controls chip form and evacuation during milling, reducing the risk of long chips and protecting the cutting edge—especially useful in interrupted or variable‑depth milling. Which holder geometry matches this insert? Use a holder compatible with a parallelogram 85° insert form and the ADGT160640R‑F56 seat to ensure correct clearance and secure clamping for optimal performance. Is the corner radius of 4 suitable for finishing? A corner radius of 4 provides a balance between strength and surface finish; it supports durable edges while still achieving consistent surface quality in typical milling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by our company. The offered item is original, brand‑new goods from the named manufacturer.
ADGT1606PER-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and an optimised D51 chipbreaker for consistent chip control and extended tool life; the result is productive machining of steel and cast iron with predictable performance. Order the insert directly via Metav Werkzeuge or ask the consultants for selection support. ADGT1606PER-D51 WKP25S – milling insert, Tiger·tec Silver coating, D51 chipbreaker | Walter Tools The ADGT1606PER-D51 WKP25S is a parallelogram milling insert engineered for reliable, high-productivity machining of steel and cast iron in a wide range of industrial applications Tiger·tec Silver coating for extended life D51 chipbreaker for reliable chip control Parallelogram 85° form for flexible setups Suitable for steel and cast iron machining Consistent chip control for higher throughput The D51 chipbreaker has been developed to deliver stable chip formation under variable cutting conditions, which directly improves machining predictability. By reducing erratic chip shapes and minimising entanglement, the insert lowers the risk of tool damage and machine downtime. This results in a measurable uplift in process throughput and a reduction in scrap rates. The chip geometry is optimised for interrupted and continuous cuts, so operators and process engineers benefit from fewer adjustments and a steadier surface-finish performance. In practice, the controlled chip evacuation also helps to maintain coolant flow and heat management at the cutting edge, enhancing overall efficiency. Broad material capability with high process security The WKP25S grade, part of the Tiger·tec Silver series, is a coated carbide engineered for demanding environments typical in machining of P and K materials. P indicates suitability for steel, including unalloyed and alloyed grades, while K denotes compatibility with cast iron. The coating and substrate combination offers improved wear resistance and edge stability, which supports higher cutting speeds and repeatable results. For shops aiming to standardise on a single insert across mixed workpieces, this grade reduces complexity while maintaining process security and surface-quality consistency. Integration benefits that reduce cost per part The parallelogram plate form with an 85° cutting geometry and a 15° relief angle provides a versatile seating and approach for many milling fixtures. This geometry supports secure clamping and allows multiple cutting edges to be indexed, which minimises tool changes and lowers tooling costs. The plate’s dimensions and thickness ensure compatibility with common toolholders, enabling quick replacement and minimal setup time. Together, the geometry, coating and chip control contribute to an extended tool life and a lower cost per finished component, making the solution particularly attractive for medium- to high-volume production runs. For stable, repeatable milling with proven wear performance, request Walter Tools Tiger·tec Silver inserts from Metav Werkzeuge — contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: ADGT1606PER-D51-WKP25S-WALTER Designation: ADGT1606PER-D51 Label: Fräswendeschneidplatte ADGT1606PER-D51 WKP25S Walter Tools Facts Plate size: 16 Plate thickness: 06 Relief angle: 15° Plate form angle: Parallelogram 85° Tolerance class: G Special features Grade: WKP25S (Tiger·tec Silver) Chipbreaker: D51 Material suitability: P / K (steel, cast iron) Series designation: Tiger·tec Silver Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ADGT1606PER-D51 WKP25S is suited to machining steel (P) and cast iron (K); the WKP25S grade was developed for these material groups. How does the D51 chipbreaker improve production? The D51 chipbreaker promotes consistent chip formation and evacuation, which improves process reliability and surface finish when using the ADGT1606PER-D51 WKP25S insert. Can the insert be used at higher cutting speeds? Yes, the Tiger·tec Silver coating and WKP25S substrate combination increases wear resistance and supports higher cutting speeds compared with uncoated grades. What is the benefit of the parallelogram 85° form? The parallelogram 85° geometry enables flexible toolholder setups and secure clamping, reducing setup time and allowing multiple indexable edges to be used before replacement. Which series does the grade belong to and what does that mean? The grade WKP25S belongs to the Tiger·tec Silver series, which is a coated carbide family designed for improved tool life and stable machining of P and K materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, factory-new product of the manufacturer.
ADGT1606PER-D51 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKP35G grade for consistent chip control and extended tool life; the parallelogram geometry and D51 chipbreaker further ensure stable cutting in demanding milling operations. Order the ADGT1606PER-D51 insert via Metav Werkzeuge or consult the team for application-specific recommendations. ADGT1606PER-D51 WKP35G milling insert – Walter Tools (for Steel & Cast Iron, Tiger·tec Gold) The ADGT1606PER-D51 WKP35G is a parallelogram milling indexable insert engineered for productive machining of steel and cast iron in industrial milling applications. Tiger·tec Gold coating for extended tool life WKP35G grade suited to steel and cast iron Parallelogram 85° geometry for secure engagement 15° clearance angle for stable cutting D51 chipbreaker for consistent chip control Consistent wear resistance and process reliability The combination of the WKP35G carbide grade with the Tiger·tec Gold coating delivers a balanced performance profile for both roughing and medium-finishing operations on steel and cast iron. The coating reduces adhesive wear and improves thermal stability, which translates into longer tool life and fewer interruptions for index changes. This behaviour supports predictable production cycles and helps maintain surface quality across batches, while the coated carbide substrate manages the heat and abrasion typical for these workpiece groups. Geometry and chip control that raise machining stability The Parallelogram 85° insert shape and the 15° clearance angle promote secure seating in the cutter body and effective engagement at the cut edge; the result is reduced vibration and improved dimensional stability. The integrated D51 chipbreaker is optimised to form controllable chips for intermittent and continuous cutting conditions, lowering the risk of chip-related interruptions and improving swarf evacuation. The insert’s 16 size and 06 thickness provide a robust cutting edge suited to conventional milling holders while supporting repeatable clamping and indexability. Practical advantages for production planning and tool management With a tolerance class G, this insert meets industrial dimensional expectations for reliable mounting and reproducible tool offsets, which simplifies tool setting and machine programming. The grade’s broad applicability to ISO group P and K (representing steel and cast iron) offers flexibility across multiple components without frequent tool changes, supporting lean tool inventories. For process optimisation, Metav Werkzeuge can advise on cutter selection and application parameters to exploit the insert’s strengths while balancing productivity and surface finish. Contact Metav Werkzeuge for tailored cutting data, recommendations on Walter Tools Tiger·tec Gold inserts, and ordering of the ADGT1606PER-D51 WKP35G via +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: ADGT1606PER-D51-WKP35G-WALTER Label: Milling indexable insert ADGT1606PER-D51 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Insert size: 16 Thickness: 06 Clearance angle: 15° Geometry angle: 85° Tolerance class: G Special features Chipbreaker: D51 Applicable materials: Steel (P), Cast iron (K) Coating: Tiger·tec Gold Insert designation: ADGT1606PER-D51 WKP35G Execution: T Shape: Parallelogram FAQ Which workpiece materials are suitable for this insert? The ADGT1606PER-D51 WKP35G insert from Walter Tools is designed for machining steel (ISO group P) and cast iron (ISO group K), with the WKP35G grade optimised for the typical heat and chip behaviour of these materials. What are the key geometry features that influence performance? The parallelogram shape with an 85° edge, a 15° clearance angle and the D51 chipbreaker define the insert’s cutting behaviour; together they provide secure seating, stable cutting forces and controlled chip formation for consistent milling results. How does the WKP35G grade differ from other grades? WKP35G is a coated carbide grade within Walter Tools’ Tiger·tec Gold family, offering a balanced combination of wear resistance and thermal stability aimed at productive machining of steel and cast iron compared with uncoated or general-purpose grades. Which tool holders are compatible with this insert designation? The ADGT1606PER-D51 geometry requires a milling cutter body that accepts the ADGT1606PER-D51 seat; compatibility depends on the cutter manufacturer and seat type, so match the insert designation to the holder specification. What does tolerance class G mean for tool setup? Tolerance class G indicates a specific dimensional tolerance level that supports accurate seating and repeatable offsets, simplifying setup and contributing to consistent component tolerances during serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned here solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer. The brand Walter Tools is used where applicable.
ADGT1606PER-D51 WKP35S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the WKP35S grade for reliable machining of steel and cast iron, combining long tool life with consistent chip control; order the ADGT1606PER-D51 WKP35S directly via Metav Werkzeuge or ask the consultants for application advice. ADGT1606PER-D51 WKP35S milling insert — Tiger·tec Silver grade, for steel and cast iron (Walter Tools) The ADGT1606PER-D51 WKP35S is a precision milling insert from Walter Tools designed for productive face and shoulder milling in steel and cast iron, offering robust wear resistance and stable chip formation. Tiger·tec Silver coating for extended life Optimised D51 chipbreaker for stable chips 15° clearance angle for reliable engagement Parallelogram 85° form for versatile milling Robust wear resistance for demanding steel and cast-iron applications The combination of the Tiger·tec Silver coating and the WKP35S substrate delivers enhanced abrasion resistance and thermal stability, which translates into longer tool life and fewer insert changes during production. This grade was developed for typical steel and cast-iron conditions and is optimised to counter the high temperatures and abrasive effects that occur during heavy-duty milling. The result is predictable tool performance and improved process stability when machining a wide range of P and K workpiece groups. Precision geometry that improves surface quality and engagement A Parallelogram 85° form and a 15° clearance angle ensure secure seating and consistent cutting engagement across various milling strategies. The insert’s dimensional setup — size 16 with a thickness coded 06 and tolerance class G — supports accurate positioning in modern milling cutters, reducing runout sensitivity and contributing to a reliable surface finish. These geometrical choices make the insert suitable for both finishing and light roughing where repeatable accuracy and controlled cutting forces are required. Effective chip control that reduces interruptions The integrated D51 chipbreaker is shaped to promote short, manageable chips in both steel and cast iron, reducing the risk of chip entanglement and improving coolant access at the cutting zone. Stable chip formation lowers downtime for manual cleaning and supports safer automated operations. Less frequent interruptions for chip disposal and improved chip flow also contribute to higher effective machining uptime and enhanced operator safety. Balanced economy through consistent productivity Designed by Walter Tools within the Tiger·tec Silver family, this insert offers a pragmatic balance of wear resistance, dimensional stability and broad application scope. The grade’s performance characteristics aim to lower total machining costs by extending edge life and reducing the frequency of tool changes. For production environments seeking repeatable results across mixed batches of unalloyed and alloyed steels as well as grey and nodular cast irons, the insert provides a cost-effective, dependable solution. For reliable, high-process productivity with Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for ordering and material-specific recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADGT1606PER-D51-WKP35S-WALTER Name: ADGT1606PER-D51 WKP35S Brand: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Plate size: 16 Thickness code: 06 Free angle: 15° Plate form: Parallelogram 85° Chipbreaker: D51 Tolerance class: G Special features Material groups: P / K Main applications: Steel and cast iron Execution: T Baureihe: Tiger-tec Silver Sortenbeschreibung: Coated cemented carbide FAQ What materials is this milling insert suitable for? The ADGT1606PER-D51 WKP35S from Walter Tools is suitable for steel (P) and cast iron (K), with the WKP35S grade engineered to handle the thermal and abrasive demands of these material groups. What benefit does the D51 chipbreaker provide? The D51 chipbreaker on this insert promotes short, controllable chips and improved chip evacuation, which reduces interruptions and supports safer, more efficient milling with the ADGT1606PER-D51 WKP35S. Which geometric features improve stability and finish? The Parallelogram 85° form and 15° clearance angle provide secure engagement and consistent cutting action, enhancing surface quality and reducing sensitivity to cutter runout when using this Walter Tools insert. How does the Tiger·tec Silver series influence productivity? Tiger·tec Silver coating increases wear resistance and thermal performance; when combined with the WKP35S grade it extends edge life and helps maintain cutting parameters for longer production runs with the ADGT1606PER-D51 WKP35S. Is this insert suitable for finishing and roughing operations? Yes — the geometry and chip control of this insert make it versatile for both finishing and light to medium roughing on steel and cast iron, offering a balance between surface quality and tool life. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1606PER-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, versatile material coverage and optimised chip control for consistent production results; order the insert directly via Metav Werkzeuge or consult the specialists if further application data is required. ADGT1606PER-D51 WSP45G Fräswendeschneidplatte – Tiger·tec Gold, Walter Tools The ADGT1606PER-D51 WSP45G is a coated carbide milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in industrial machining applications. Tiger·tec Gold PVD coating Parallelogram 85° insert form 15° clearance angle for secure cutting Chip control D51 for reliable swarf handling Increased throughput through optimised cutting performance The Tiger·tec Gold grade delivers a balance of wear resistance and edge stability that improves cycle times on a wide range of components. As a coated carbide insert with a PVD surface, the cutting edge resists abrasion and maintains geometry under thermal load, which translates into longer tool life and fewer indexings. For manufacturing environments seeking measurable gains in productivity, this milling grade supports higher feed rates and stable machining of both low‑alloy steels and tougher materials, reducing downtime associated with frequent insert changes. Reliable chip control and secure engagement for predictable results The combination of the chipbreaker D51 and the parallelogram 85° geometry provides consistent chip formation and evacuation during traversing and slotting operations. This design reduces the risk of chip re‑cutting and improves surface finish in finishing passes. The 15° clearance angle offers secure cutting action and helps prevent rubbing, while the insert form contributes to predictable tool orientation in multi‑axis milling setups. These features together enhance process reliability, enabling stable operation in series production where repeatability is essential. Broad material range and application advantages explained Rated for the ISO material groups P / M / S, the insert suits standard steels, stainless steels and nickel/titanium‑based superalloys. The WSP45G grade is described as a tough, multifunctional PVD variety optimised for milling; this means it copes well with variable thermal conditions and adhesive wear typical of stainless and heat‑resistant alloys. In practice, the designation indicates suitability for roughing and semi‑finishing operations where both edge life and resistance to chipping are required. The term “PVD coating” denotes a thin, hard layer applied via physical vapour deposition to improve surface hardness and reduce friction at the cutting zone. Economic benefits and quality assurance for production environments Using a well‑matched insert grade reduces total machining cost by extending life per index and lowering the frequency of tool changes. The robust cutting edge characteristics of the Tiger·tec Gold series contribute to consistent dimensional accuracy and surface quality, which helps meet inspection tolerances with fewer reworks. Selection of this insert supports a cost‑efficient workflow: the productive combination of geometry, chip management and coating minimises unexpected interruptions and promotes smoother process planning across batch sizes. Contact Metav Werkzeuge for tailored application advice or to request detailed cutting data for specific materials and depths of cut Technical Data Article number: ADGT1606PER-D51-WSP45G-WALTER Designation: ADGT1606PER-D51 WSP45G Series: Tiger·tec Gold Grade: WSP45G Version: T Manufacturer: Walter Tools Core Technical Data Insert form: Parallelogram 85° Relief/clearance angle: 15° Insert size: 16 Thickness designation: 06 Chipbreaker: D51 Tolerance class: G Material groups: P / M / S Special features and materials Coated carbide (PVD coating) Suitable for steel, stainless steel and superalloys/titanium Tough, versatile PVD grade optimised for milling Stable chip formation and edge robustness Designed for productive milling applications FAQ What machining tasks is this insert best suited for? The ADGT1606PER-D51 WSP45G insert from Walter Tools is primed for general milling tasks, including roughing and semi‑finishing of steels, stainless steels and heat‑resistant alloys. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold PVD coating on this milling insert improves wear resistance and reduces adhesive tendencies, which extends tool life and supports higher feed rates in industrial milling. Can this insert handle stainless steel reliably? Yes; the WSP45G grade is formulated for stainless steel applications and offers chip control and edge stability suited to the material’s tendency to work harden and produce built‑up edges. What role does the chipbreaker D51 play in performance? The D51 chipbreaker promotes controlled chip formation and evacuation, lowering the likelihood of re‑cutting and improving surface finish during continuous milling operations. Is the insert geometry compatible with multi‑axis milling heads? The parallelogram 85° form and 15° clearance angle provide secure engagement and predictable orientation, making the insert suitable for many multi‑axis milling configurations where consistent cutting geometry is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is recognised for precision machining solutions. Protected trademarks and brand names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no commercial affiliation implied between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
ADGT1606PER-D56 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a geometry optimised for stable cutting and proven chip control to ensure productive, low-maintenance machining of cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. ADGT1606PER-D56 WKK25G indexable milling insert — Parallelogram 85°, Tiger·tec Gold, Walter Tools ADGT1606PER-D56 WKK25G is an indexable milling insert designed for productive machining of cast iron, combining a robust geometry with a coating engineered for abrasive wear resistance Tiger·tec Gold coating for abrasive wear WKK25G grade optimised for cast iron Parallelogram 85° geometry for edge stability Chipbreaker D56 for controlled chip formation High productivity and tool life for cast iron machining The ADGT1606PER-D56 WKK25G insert features the Tiger·tec Gold coating and the WKK25G grade, which are specifically tuned to the demands of cast iron machining. The coating system and the coated-carbide substrate reduce abrasive wear and protect the cutting edge in interrupted cuts typical of grey and nodular cast irons. As a result, the insert delivers a predictable tool life and consistent surface finish, supporting uninterrupted production cycles and fewer index changes. The combination of grade and coating offers a measurable increase in process stability when cutting abrasive cast materials. Geometry and chip control that support efficient milling The parallelogram 85° outline and a 15° clearance angle provide a stable cutting geometry that resists edge chipping while maintaining a positive engagement with the workpiece. The chipbreaker D56 promotes short, controllable chips when machining brittle, abrasive cast iron, which improves evacuation and reduces the risk of re-cutting. With a plate size of 16 and a thickness of 06 the insert balances rigidity and accessibility in a range of face-milling and shoulder-milling toolholders, supporting higher feed rates without compromising edge stability. Process security and economic efficiency in production Tolerance class G and the standardised ISO-style designation ensure interchangeability and repeatability across tool assemblies. The coated-carbide construction permits sustained cutting under high abrasion, lowering the frequency of index changes and tool replacements. In production terms, this translates to reduced machine downtime and lower running costs per component. The insert’s combination of wear resistance and a stable cutting edge supports predictable scheduling and easier cost-benefit analysis for long production runs. Practical application notes and suitability This insert is intended primarily for machining cast iron materials (ISO group K). The WKK25G grade performs well in applications where short, broken chips are the norm and where abrasive wear is a controlling factor. For best results, select a toolholder compatible with parallelogram inserts and adjust cutting parameters to maintain chip dimensions recommended by the toolholder supplier. If there is uncertainty about specific cutting data or process optimisation, technical documentation and cutting charts are available to match the insert to the machine setup and workpiece properties. For reliable cast-iron performance with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for tailored recommendations and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADGT1606PER-D56-WKK25G-WALTER Label: Fräswendeschneidplatte ADGT1606PER-D56 WKK25G Walter Tools Designation: ADGT1606PER-D56 WKK25G Manufacturer: Walter Tools Facts Plate size: 16 Plate thickness: 06 Clearance angle: 15° Geometry: Parallelogram 85° Tolerance class: G Special features Series: Tiger-tec Gold Grade: WKK25G Chipbreaker: D56 Substrate: coated carbide Application: cast iron (ISO group K) FAQ What materials is this insert suitable for? The ADGT1606PER-D56 WKK25G insert is optimised for cast iron machining and is specified for ISO group K materials. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WKK25G grade reduces abrasive wear on the cutting edge, increasing the service life of the insert and improving process stability for cast iron applications. Which geometry benefits contribute to edge life? The parallelogram 85° shape and 15° clearance combine to provide a stable cutting edge and favourable engagement angles, which reduce the risk of chipping under interrupted or heavy cuts. What chip behaviour can be expected with chipbreaker D56? Chipbreaker D56 creates short, controlled chips when machining brittle cast materials, improving evacuation and reducing the likelihood of chip entanglement or workpiece scratching. Is this insert compatible with standard indexable milling toolholders? The insert follows common indexable insert conventions (size 16, thickness 06, parallelogram form) and can be used in compatible Walter Tools or other ISO-compliant toolholders designed for parallelogram inserts. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation or endorsement by the manufacturer. The offered article is original, factory-new merchandise of the named brand.
ADGT1606PER-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP25S carbide grade combined with the D56 chipbreaker for reliable chip control and extended tool life; order directly through Metav Werkzeuge or request guidance from our consultants for an optimal tooling setup. ADGT1606PER-D56 WKP25S Fräswendeschneidplatte — Walter Tools, Tiger‑tec Silver, for steel and cast iron ADGT1606PER-D56 WKP25S is an indexable milling insert designed for robust, high‑productivity machining of steel and cast iron components. Tiger‑tec Silver coating extends tool life Coated carbide grade WKP25S for steel and cast iron Parallelogram 85° shape for precise edge positioning 15° relief angle optimises chip evacuation Stable chip control for uninterrupted production The combination of the D56 chipbreaker and the WKP25S grade delivers consistent chip formation under varying cutting conditions, which directly increases process reliability and reduces downtime. Designed within the Tiger‑tec Silver series, the insert offers a coated carbide structure that resists abrasive wear typical of cast materials and copes with the heat generation encountered when machining different steel grades. As a result, tool changes become less frequent and cycle times remain predictable, supporting a measurable improvement in machining economy. Accurate geometry and surface quality for repeatable parts The parallelogram 85° form and the 15° relief angle ensure stable seating in the cutter and favourable cutting engagement, which contributes to tighter dimensional tolerances and improved surface finish. The geometry supports stable cutting edges and predictable wear patterns, so the insert maintains cutting performance across its service life. For production runs where repeatability is essential, the insert’s design reduces rework and inspection effort while helping to secure consistent part quality. Practical handling and application benefits Indexable design with a standard 16 size and 06 thickness enables quick replacement and straightforward stock management in an industrial environment. The insert is tailored to ISO groups P and K, meaning it is suitable for a broad range of steel and cast iron applications; this versatility reduces the need for multiple specialised grades on the shop floor. Combined with the robust coating and chipbreaker, the geometry supports both medium and heavy cutting strategies, enhancing overall throughput while maintaining surface integrity. For technical consultation, application recommendations or to request samples of this insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; our specialists assist with selection and process data to ensure optimal results. Technical data SKU: ADGT1606PER-D56-WKP25S-WALTER Article designation: ADGT1606PER-D56 WKP25S Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Core dimensions Insert size: 16 Thickness: 06 Relief angle: 15° Shape: Parallelogram 85° Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D56 Material suitability: steel (P) and cast iron (K) Execution: T Designation without grade: ADGT1606PER-D56 FAQ Which materials is this insert suited for? The ADGT1606PER‑D56 WKP25S insert from Walter Tools is specified for ISO groups P and K, making it suitable for a range of steel and cast iron machining tasks. What are the benefits of the WKP25S grade? WKP25S, part of the Tiger‑tec Silver family, is a coated carbide grade that improves wear resistance and heat management, supporting longer tool life and stable cutting performance on both steel and cast iron. How does the D56 chipbreaker influence machining? The D56 chipbreaker promotes controlled chip segmentation and evacuation, reducing the risk of built‑up edge and ensuring reliable chip flow in medium to heavy cutting conditions with this insert. What cutter geometry is recommended for best results? A cutter accepting a parallelogram 85° insert with a 16 size pocket and correct seat for an insert thickness of 06 is recommended to retain the designed cutting angles and to achieve consistent edge engagement. Is the 15° relief angle important for application? Yes — the 15° relief angle contributes to favourable cutting mechanics and helps with chip escape, which supports improved surface finish and reduced cutting forces in the intended material groups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
ADGT1606PER-D56 WKP35G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold coating and the WKP35G grade provide extended tool life and consistent edge stability; the parallelogram 85° form with a 15° relief angle ensures reliable engagement and repeatable results. Order the ADGT1606PER-D56 WKP35G directly via Metav Werkzeuge or contact our consultants for tailored application advice. ADGT1606PER-D56 WKP35G milling insert (Tiger·tec Gold) for steel and cast iron — Walter Tools The ADGT1606PER-D56 WKP35G is a Tiger·tec Gold coated milling insert engineered for efficient general milling of steel and cast iron, combining robust wear resistance with dependable chip control. Tiger·tec Gold coated for enhanced wear resistance WKP35G grade: coated carbide performance Parallelogram 85° form for secure clamping 15° relief angle for versatile engagement Increased productivity through a high-performance coating The Tiger·tec Gold coating on this milling insert is designed to reduce friction and resist abrasive wear under elevated cutting temperatures, which leads to longer edge life and fewer tool changes. By using a coated carbide grade optimised for dynamic loads, machining cycles can be run at higher cutting speeds while maintaining surface quality. This results in measurable cycle-time savings and improved process stability during series production. Consistent chip control and secure seating for safer machining The integrated D56 chipbreaker is developed to manage typical chip forms encountered in steel and cast iron turning and milling. Controlled chip formation reduces the risk of entanglement and improves evacuation, which in turn minimises interruptions and enhances operator safety. Combined with the parallelogram 85° geometry, the insert provides stable seat location and repeatable orientation in the cutter body, reducing setup variability and ensuring consistent part quality. Broad material capability with ISO-based classification The grade supports machining in the ISO groups P and K — meaning suitability for steel (P) and cast iron (K). These classifications indicate that the insert has been formulated to handle the heat generation and chip behaviour typical of steels, as well as the abrasive tendencies and fragmented chips of cast-iron materials. For users less familiar with ISO groupings: P = steel, K = cast iron, giving a clear indication of material compatibility for workshop planning. Geometry and dimensions engineered for practical application With an insert size of 16 and a plate thickness of 06, this component is aimed at common milling setups where a balance of stiffness and precision is required. The 15° relief angle supports a favourable cutting geometry that reduces cutting forces in many milling operations, while the tolerance class G ensures manufactured precision for interchangeable seating. These attributes simplify tool selection and help maintain steady machining performance across batches. Discuss machining parameters and application suitability with Metav Werkzeuge to select the optimal Tiger·tec Gold WKP35G insert for high-productivity steel and cast iron milling Technical data Article number: ADGT1606PER-D56-WKP35G-WALTER Designation: ADGT1606PER-D56 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Insert size: 16 Thickness: 06 Relief angle: 15° Parallelogram form angle: 85° Tolerance class: G Special features Coated carbide (Tiger·tec Gold) Chipbreaker: D56 Applicable for steel (P) and cast iron (K) Execution: T FAQ What materials is this insert suitable for? The ADGT1606PER-D56 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, enabling longer edge life and higher cutting speeds with stable surface finish. Which chipbreaker is fitted and why does it matter? This insert uses the D56 chipbreaker, which is designed to produce compact, controllable chips in both steel and cast iron, reducing machine downtime and improving safety. Is the insert geometry compatible with standard milling cutters? The parallelogram 85° form and 15° relief angle provide a common seating and approach angle suitable for many cutter bodies; the tolerance class G supports consistent fit and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
ADGT1606PER-D56 WKP35S Wendeplatten - Walter Tools
The combination of high process reliability, broad material compatibility and the Tiger·tec Silver coating ensures consistent productivity and long tool life; benefit from precise chip control and straightforward indexability. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific parameters. ADGT1606PER-D56 WKP35S milling insert — Tiger·tec Silver, for steel & cast iron | Walter Tools The ADGT1606PER-D56 WKP35S is a precision milling insert designed for productive machining of steel and cast iron, offering a robust grade and geometry for demanding milling operations. Tiger·tec Silver coating technology Grade WKP35S for steel and cast iron Parallelogram 85° shape for versatile milling D56 chipbreaker for stable chip control Higher productivity through coating and grade optimisation The combination of the Tiger·tec Silver coating and the WKP35S grade delivers a balance of wear resistance and toughness that is tuned for machining both steel (P) and cast iron (K). The coated-carbide construction reduces flank and crater wear in continuous and interrupted cuts, which translates into fewer indexings and longer productive tool life. This optimisation supports higher material removal rates while maintaining dimensional consistency, making the insert suitable for medium to heavy milling where process stability is a priority. The design emphasises efficient heat management and controlled wear progression, contributing to predictable tool performance. Geometry that supports consistent surface quality and reliable seating The parallelogram 85° form and the 15° clearance angle combine to offer a favourable cutting orientation for shoulder and face milling tasks. These geometric choices reduce cutting forces in certain tool paths and improve approach angles, which assists in achieving stable engagement and consistent surface finish. The D56 chipbreaker is tuned for reliable chip formation in the intended material groups, reducing the risk of built-up edge and facilitating evacuation. Tight tolerance class G and a plate thickness of 06 provide repeatable clamping and positional accuracy in standard toolholders, helping to preserve component tolerances and minimise rework. Broad applicability and machining recommendations Specifically produced for machining steels and cast irons, the insert’s specification (ADGT1606PER-D56 WKP35S) supports a range of milling operations where a robust coated grade is required. The insert is particularly effective in operations that encounter varying chip formation, as the chipbreaker and coated-carbide grade act together to manage abrasive wear and short, breaking chips typical of cast materials. For indexable tooling systems using parallelogram inserts, the plate offers predictable behaviour under moderate to heavy cutting conditions. Selection of cutting parameters should align with the workpiece material group designation (P or K) and the chosen grade’s capabilities to achieve the intended balance of life and machining economy. Contact Metav Werkzeuge to specify cutting parameters and secure availability of Walter Tools Tiger·tec Silver inserts for production optimisation Technical Data Article number: ADGT1606PER-D56-WKP35S-WALTER Product: Milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools ISO designation: ADGT1606PER-D56 WKP35S Facts Free angle: 15° Shape: Parallelogram 85° Plate size: 16 Thickness: 06 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S Suitable for: Steel (P) and cast iron (K) Chipbreaker: D56 Execution: T Coated carbide, optimised for chip control FAQ What materials is this insert designed for? The ADGT1606PER-D56 WKP35S insert by Walter Tools is designed primarily for steel (P) and cast iron (K) applications, utilising the WKP35S grade for balanced wear resistance. How does the D56 chipbreaker improve machining? The D56 chipbreaker on this insert promotes controlled chip formation and evacuation, which helps maintain surface finish and reduces the likelihood of built-up edge when machining steels and cast irons. Which insert geometry ensures accurate positioning? The parallelogram 85° geometry combined with a 15° clearance angle provides stable seating and predictable cutting engagement, aiding repeatable positioning in indexable tool systems. Is this insert suitable for interrupted cuts? Yes, the coated-carbide grade and the insert’s geometry make it suitable for a range of cutting conditions, including operations with intermittent engagement, where toughness and wear resistance are both required. What series and grade does this insert belong to? The insert belongs to the Tiger·tec Silver series and uses the WKP35S grade, which is optimised for productive machining of steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original factory-new product of the manufacturer.
ADGT1606PER-D56 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSP45G grade delivers extended tool life and consistent chip control via the D56 breaker, enabling productive milling of Stahl, rostfreier Stahl and heat‑resistant alloys; order directly via Metav Werkzeuge or consult their specialists if required. ADGT1606PER-D56 WSP45G milling insert – Tiger·tec Gold, Walter Tools The ADGT1606PER-D56 WSP45G is a parallelogram‑form milling insert engineered for versatile face and profile milling across a broad range of industrial alloys. Tiger·tec Gold PVD coating increases wear resistance Compatible with Stahl, rostfreier Stahl and Superalloys Parallelogram 85° form with 15° clearance D56 chipbreaker for secure chip control Reliable machining of difficult materials The combination of the WSP45G grade and Tiger·tec Gold coating targets the thermal and mechanical demands of modern milling. Designed for materials classified under P/M/S, this insert balances edge stability and toughness so machining of Stahl and rostfreier Stahl proceeds with reduced risk of build‑up and premature flank wear. The result is repeatable tool life and fewer unexpected insert changes, which supports stable production runs and predictable cycle times. Precision geometry for consistent results The Parallelogram 85° form and 15° clearance provide a geometry that enhances accessibility in shoulder and profile operations while maintaining a secure cutting angle. The insert thickness and form give reliable seating in compatible cutters, reducing vibration and improving surface finish. When used with appropriate cutting data, this geometry helps to convert higher spindle speeds into efficient material removal with controlled cutting forces. Coating and chip control for productivity A PVD coating technology under the Tiger·tec Gold name adds a wear‑resistant surface suited to intermittent and continuous cuts. Paired with the D56 chipbreaker, the system manages chip formation across variable feeds and depths, reducing the incidence of tangled chips and workpiece damage. This controlled chip behaviour shortens non‑productive time for machine and operator interventions and supports safer, more efficient milling cycles. Application focus and operational benefit Intended for general milling tasks across diverse alloy groups, the insert supports both roughing and finishing when selected with matching cutter bodies and machining parameters. The robust WSP45G composition lends itself to a wide spectrum of industrial use, from general structural components in Stahl to more demanding conditions in rostfreier Stahl and heat‑resistant materials. The balance of toughness and wear resistance can contribute to lower tool inventory and improved uptime in series production. Contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss Walter Tools Tiger·tec Gold inserts, application recommendations, and availability Technical data SKU: ADGT1606PER-D56-WSP45G-WALTER Article: ADGT1606PER-D56 WSP45G Type: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Series: Tiger‑tec Gold Core dimensions Insert size: 16 mm Thickness: 06 Relief angle: 15° Insert form angle: 85° (parallelogram) Special features Grade: WSP45G Coating: Tiger·tec Gold (PVD) Chipbreaker: D56 Applicable material groups: P / M / S Tolerance class: G Version: T FAQ What materials is the insert suited for? The ADGT1606PER‑D56 WSP45G insert is specified for machining Stahl, rostfreier Stahl and Superalloys (group P/M/S), reflecting the design focus of the WSP45G grade. How does the D56 chipbreaker influence machining? The D56 chipbreaker on this Walter Tools insert promotes predictable chip formation and evacuation, reducing the likelihood of chip entanglement and improving process stability. Is the parallelogram form suitable for shoulder milling? Yes, the parallelogram 85° geometry combined with 15° clearance supports shoulder and profile milling while maintaining reliable cutting engagement. What advantages does Tiger·tec Gold coating provide? Tiger·tec Gold (PVD) coating enhances wear resistance and edge life under thermal load, which helps to extend service intervals for the WSP45G‑grade inserts. Which cutter bodies are compatible with the ADGT1606PER‑D56 specification? Cutter bodies that accept ADGT‑style parallelogram inserts with a 16 mm size and the matching seat geometry will be compatible; correct clamping and seat condition are essential for achieving the insert’s performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original factory‑new product of the manufacturer.
ADGT1606PER-D67 WKP35G Wendeplatten - Walter Tools
Benefit from long tool life and consistent chip control thanks to the Tiger·tec Gold grade and the D67 chipbreaker, which together support productive machining cycles. Order the ADGT1606PER-D67 WKP35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADGT1606PER-D67 WKP35G milling insert — Walter Tools, Tiger·tec Gold, 15° free angle The ADGT1606PER-D67 WKP35G is a parallelogram milling insert designed for precision machining of steel and cast iron in demanding manufacturing environments. Tiger·tec Gold coating for extended life Optimised chipbreaker D67 for reliable chips Parallelogram 85° geometry for stable cutting Suitable for steel and cast iron machining High productivity through engineered grade and geometry The Tiger·tec Gold coating combined with the WKP35G grade delivers high abrasion resistance and consistent performance when machining steel and cast iron. The insert’s parallelogram 85° geometry and the D67 chipbreaker are engineered to stabilise chip formation and reduce vibration, resulting in measurable improvements in cycle times and tool life. These technical choices translate into fewer tool changes and more uninterrupted production — a clear efficiency gain for series manufacturing and job-shop operations. Reliable chip control for secure process windows With a dedicated chipbreaker profile, the insert provides dependable chip evacuation even under interrupted cuts commonly encountered in cast iron work. The combination of shape and breaker design ensures predictable chips and reduced re-cutting of swarf, which improves surface integrity and lowers the risk of workpiece damage. The 15° free angle supports secure edge engagement, helping to maintain process stability across batch runs while providing a balance between cutting force and edge strength. Coating and substrate tuned for demanding materials The coated carbide substrate of the WKP35G grade is optimised for the thermal and mechanical loads typical of steel machining. The Tiger·tec Gold layer enhances wear resistance and supports higher cutting parameters where machine and fixture rigidity allow. The result is a robust cutting edge that maintains dimensional accuracy over extended tool life, supporting tight tolerances and a consistent surface finish — an advantage for precision components where repeatability matters. Practical integration and handling benefits Designed in a common industry geometry, the insert fits milling tool bodies that accept the ADGT-style family and benefits from straightforward indexing and secure clamping. Size code 16 and thickness code 06 provide a stable contact surface and edge strength for medium to heavy milling tasks. The T execution and G tolerance class ensure dimensional conformity for reliable replacement and minimal set-up time, aiding quick tool changes and consistent baseline performance on the shop floor. Contact Metav Werkzeuge for tailored application advice on the Walter Tools ADGT1606PER-D67 WKP35G insert and to check current availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADGT1606PER-D67-WKP35G-WALTER Label: Fräswendeschneidplatte ADGT1606PER-D67 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Execution: T Tolerance class: G Facts Free angle: 15° Plate form: Parallelogramm 85° Plate size: 16 Plate thickness: 06 Chipbreaker: D67 Special features Coated carbide grade (WKP35G) Tiger·tec Gold coating technology Suitable for steel and cast iron (ISO P and K) Parallelogram geometry for increased stability Optimised chip control for interrupted cuts Designed for productive milling applications FAQ What materials is this insert suitable for? The ADGT1606PER-D67 WKP35G insert from Walter Tools is specified for steel and cast iron machining according to its Tiger·tec Gold grade and ISO material grouping P and K. How does the D67 chipbreaker affect machining? The D67 chipbreaker on the ADGT1606PER-D67 WKP35G promotes predictable chip formation and efficient evacuation, reducing re-cutting of swarf and improving surface quality in milling operations. Can the insert withstand continuous high-speed machining? The Tiger·tec Gold coating and the WKP35G substrate are engineered for elevated process security and abrasion resistance, supporting sustained machining when machine rigidity and cooling are appropriate. Which tool geometries are compatible with ADGT-style inserts? The ADGT1606PER-D67 WKP35G fits milling cutters designed for ADGT-format parallelogram inserts and benefits from secure clamping and straightforward indexing for repeatable set-ups. What are the key benefits of choosing this Walter Tools insert? Selecting the ADGT1606PER-D67 WKP35G provides a combination of coating performance, robust chip control, and geometry that enhances stability — all contributing to longer tool life and more consistent production results. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for descriptive purposes only and do not imply any affiliation or endorsement by the trademark owners. The offered item is an original, factory-new product of the named manufacturer.
ADGT1606PER-D67 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of high process security and broad material capability for dependable, productive milling. The insert’s Tiger·tec Silver technology and WKP35S grade deliver stable chip formation and good wear resistance, making it an economical choice for mixed production of steel and cast iron — order via Metav Werkzeuge or consult their specialists for application advice. ADGT1606PER-D67 WKP35S — Indexable milling insert, Tiger·tec Silver, for steel and cast iron (Walter Tools) A durable indexable milling insert, ADGT1606PER-D67 WKP35S, designed for productive milling in steel and cast iron with a parallelogram geometry and advanced coating technology Tiger·tec Silver coating technology Suited for steel (P) and cast iron (K) Parallelogram 85° insert form D67 chipformer for controlled chip formation Performance gains from coating and grade The combination of Tiger·tec Silver coating with the WKP35S grade yields a reliable balance of wear resistance and edge stability for demanding milling tasks. The coated carbide substrate is engineered to tolerate the thermal and mechanical loads typical when machining steel and cast iron, reducing flank wear and maintaining consistent cutting edge geometry over longer tool life. As a result, cycle time variations are minimised and tool change intervals are extended, supporting stable production rhythms and lower unit costs. Geometry and chip control for predictable machining With a parallelogram 85° form and a 15° clearance, the insert provides a robust cutting edge and controlled engagement with the workpiece, improving tool life under interrupted cuts often encountered in milling. The D67 chipformer promotes short, fragmenting chips when cutting cast materials and manageable chip forms in steels, aiding process reliability and reducing the risk of chip-related downtime. The insert’s insert size 16 and thickness 06 give a compact but sturdy geometry suitable for a wide range of milling cutters and pocket depths. Application scope and practical advantages Designed primarily for materials classified as P and K according to ISO 513, this insert is particularly effective where mixed batches of steel and cast iron must be machined with consistent surface quality. The grade is aligned to the Tiger·tec Silver family, offering modern coating performance for improved heat and abrasion resistance. For toolroom and production environments that demand repeatable results, the geometry and grade combination supports high process security and predictable tool behaviour, enabling more confident process parameter selection and easier integration into production cycles. For specific cutting data, toolholder compatibility or application recommendations, contact Metav Werkzeuge for tailored advice and fast supply of genuine Walter Tools products. Technical data Article number: ADGT1606PER-D67-WKP35S-WALTER Designation: ADGT1606PER-D67 WKP35S Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 06 Clearance angle: 15° Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipformer: D67 Insert form: Parallelogram 85° Material suitability: P / K (steel and cast iron) FAQ What materials is this insert suitable for? The ADGT1606PER-D67 WKP35S insert is specified for materials in groups P and K, meaning it is suited for steel and cast iron applications. What benefits does the Tiger·tec Silver technology provide? Tiger·tec Silver coating on the WKP35S grade enhances thermal and abrasive resistance, improving edge life and process reliability when milling steels and cast irons. How does the D67 chipformer influence machining? The D67 chipformer is designed to produce controlled chip forms, reducing chip entanglement and improving surface finish consistency during milling operations with the ADGT1606PER-D67 insert. Is this insert compatible with standard parallelogram pockets? The parallelogram 85° form and the stated dimensions make the insert compatible with toolholders designed for ADGT-style parallelogram inserts; confirm pocket dimensions with tooling documentation. Can the insert be used for interrupted cuts? Yes, the insert’s geometry and coated carbide grade provide edge robustness suitable for interrupted milling, improving resistance to chipping under impact loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com