ADHT1606PEL-G88 WXN15 Wendeplatten - Walter Tools
Reliable machining of non‑ferrous materials is achieved through the combination of a sharp uncoated carbide grade (WXN15) and the G88 chipbreaker with a 15° clearance, delivering clean chips and reduced adhesion for efficient production. Benefit from the Walter N‑series' proven geometry for consistent results and long tool life. Order the ADHT1606PEL-G88 WXN15 directly via Metav Werkzeuge or ask our consultants if needed. ADHT1606PEL-G88 WXN15 – Parallelogram 85°, 15° clearance indexable milling insert for non‑ferrous metals, Walter Tools The ADHT1606PEL-G88 WXN15 is an indexable milling insert engineered for sharp, low‑adhesion machining of NE‑metals such as aluminium, copper and brass, combining an uncoated carbide grade with a G88 chipbreaker and a parallelogram 85° form for versatile chamfering and face milling. Parallelogram 85° geometry for versatile milling 15° clearance angle for sharp edge engagement Uncoated carbide grade WXN15 for NE‑metals G88 chipbreaker reduces material adhesion Cleaner chip control and better surface finish with NE‑metals The insert’s G88 chipbreaker and uncoated carbide construction are tailored to the demands of non‑ferrous alloys. Sharp cutting edges minimise material build‑up and prevent smearing on the cutting edge, which is critical when working with aluminium and brass. This leads to improved surface quality and reduced secondary operations. For shops aiming to cut cycle time and scrap rates, the geometry helps maintain consistent chip evacuation and stable cutting forces, translating into reliable part quality in batch production. Stable cutting performance through optimised geometry The Parallelogram 85° outline combined with a 15° clearance provides a controlled, repeatable engagement angle that supports stable cutting and predictable tool behaviour. The insert thickness and ground seating ensure accurate clamping and repeatable positioning in toolholders, which maintains dimensional consistency across workpieces. By favouring precise geometry over excessive coatings for this application, the grade WXN15 offers predictable wear characteristics and dependable edge integrity under typical non‑ferrous cutting conditions. Process security and productivity benefits for series production Placed in the Walter N‑series, this insert is designed for straightforward tool selection and quick index changes, supporting productive machining workflows. The combination of a sharp grade and a dedicated chipbreaker reduces downtime associated with rework and cleaning, while enabling higher feed rates where appropriate. The insert’s properties contribute to lower total machining costs by reducing cycle time and improving first‑pass yield, providing measurable benefits for manufacturing environments focused on throughput and consistency. Contact Metav Werkzeuge for tailored application advice and prompt supply of Walter Tools inserts; professional consultants are available to discuss optimal toolholder pairing and cutting parameters Technical Data Article number: ADHT1606PEL-G88-WXN15-WALTER Type: Indexable milling insert ISO designation: ADHT1606PEL-G88 WXN15 Series: Walter N‑series Grade: WXN15 Facts Insert size: 16 Thickness: 06 Clearance angle: 15° Geometry: Parallelogram 85° Tolerance class: H Special features Uncoated carbide (sharp grade for NE‑metals) G88 chipbreaker for reduced adhesion Suited to aluminium, copper, brass (NE‑metals) Designed for sharp/uncoated applications in the Walter N‑series FAQ What materials is this insert intended for? The ADHT1606PEL-G88 WXN15 is intended for NE‑metals; it is optimised for aluminium, copper and brass machining using the sharp WXN15 grade. Does the insert require a coated grade for longer life? For non‑ferrous applications the uncoated WXN15 grade with the G88 chipbreaker offers superior performance by preventing material build‑up; coated grades are typically chosen for different material groups. Which toolholders are compatible with the ADHT1606PEL-G88 WXN15? Compatibility depends on the toolholder seat and clamping system; the insert’s parallelogram 85° form is compatible with holders designed for ADHT‑style inserts and standard clamping systems for this insert family. How does the G88 chipbreaker affect machining parameters? The G88 chipbreaker promotes short, consistent chips and lower adhesion, which often permits higher feed rates and improved surface finish when machining non‑ferrous alloys with the ADHT1606PEL-G88 WXN15. Is this insert part of a broader system for easy reordering? Yes, it belongs to the Walter N‑series and is designated ADHT1606PEL‑G88 WXN15, which simplifies tool selection and replenishment within the Walter Tools portfolio. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADHT1606PER-G88 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, a rigid parallelogram 85° geometry and the WK10 uncoated carbide grade for productive milling operations; order directly via Metav Werkzeuge or request application advice from the specialists. ADHT1606PER-G88 WK10 milling insert (Parallelogram 85°, 15° clearance) – Walter Tools The ADHT1606PER-G88 WK10 is a milling insert engineered for medium-duty finishing and semi-finishing applications where stable chip formation and predictable edge life are required. Parallelogram 85° insert shape 15° clearance angle for stable cutting WK10 uncoated carbide grade G88 chipbreaker for controlled chips Stable chip control that improves cycle consistency The combination of the G88 chipbreaker and the insert geometry delivers consistent chip formation, which reduces rework and eases chip evacuation in automated and manual milling processes. The chipbreaker is designed to break chips into short, manageable segments; this lowers the risk of recutting and helps to maintain tool life. For production environments where process reliability matters, predictable chip behaviour translates directly into fewer interruptions and higher throughput. Material grade and wear performance explained Supplied in the WK10 grade, this insert is made from an uncoated carbide formulation intended for a broad range of general machining tasks. The uncoated nature favours operations where thermal or mechanical loading is moderate and where regrinding or specific machinability is required. Assessments against the product matrix are advised to confirm suitability for particular workpiece materials and cutting conditions; verifying the grade against the intended application ensures optimal wear behaviour and repeatable results. Geometry that supports precision and accessibility The parallelogram 85° shape and 15° clearance angle offer a balance between rigidity and approachability in tight or stepped features. The angular form provides improved accessibility for shoulder milling while maintaining a secure seat in the toolholder, which helps to reduce vibration and produce a consistent surface finish. The thickness code (06) contributes to the assembly’s stiffness; this is beneficial when maintaining dimensional accuracy across successive passes. Practical advantages for shop-floor integration As a standard insert format, this product integrates readily with common Walter-compatible toolholders used across industry. The concise geometry and chip control characteristics support both single-pass finishing and multi-pass semi-finishing strategies, helping to shorten set-up times and simplify inventory management. Operators and process engineers gain predictable tool performance, which supports process optimisation and cost-effective machining cycles. For productive, reliable milling with Walter Tools’ WK10-grade inserts, contact Metav Werkzeuge for tailored application guidance and quick availability through their technical sales team. Technical data Article number: ADHT1606PER-G88-WK10-WALTER SKU: ADHT1606PER-G88-WK10-WALTER Description: Fräswendeschneidplatte ADHT1606PER-G88 WK10 Manufacturer: Walter Tools Facts Clearance angle: 15° Insert size: 16 Thickness code: 06 Tolerance class: H Special features Chipbreaker: G88 Insert shape: Parallelogram 85° Grade: WK10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Material designation: Catalogue-dependent FAQ What materials is this insert suited for? This insert in the WK10 grade is intended for general machining tasks; suitability for specific materials should be checked against the product matrix to confirm compatibility. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes short, manageable chips for improved evacuation and reduced risk of recutting when using the ADHT1606PER-G88 WK10 milling insert from Walter Tools. Can this insert be used for finishing and semi-finishing? Yes, the geometry and clearance angle make the insert appropriate for both finishing and semi-finishing strategies in compatible applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
ADHT1606PER-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Benefit from the combination of a sharp uncoated carbide grade WXN15 and an optimised G88 chipbreaker for reliable, burr‑reduced machining of non‑ferrous metals; combine easy indexability and consistent edge performance to keep production running smoothly. Order the insert directly via Metav Werkzeuge or request advice from our technical consultants. ADHT1606PER-G88 WXN15 milling indexable insert — Parallelogram 85°, 15° clearance by Walter Tools The ADHT1606PER-G88 WXN15 is a parallelogram milling insert engineered for efficient, sharp cutting of non‑ferrous metals such as aluminium, copper and brass in light to medium milling operations. Sharp uncoated carbide grade WXN15 Optimised G88 chipbreaker for non‑ferrous metals Parallelogram 85° form with 15° clearance Size 16, thickness 06 for stable seating Precision cutting for non‑ferrous materials that reduces rework The insert’s WXN15 composition is an uncoated carbide grade developed for applications in the non‑ferrous group. Its sharp cutting edge reduces material adhesion and built‑up edge, which helps to maintain a consistent cutting profile when machining aluminium, copper or brass. The result is fewer interruptions for edge dressing and less downstream finishing, which translates directly into improved process efficiency and reduced scrap rates. The G88 chipbreaker works in concert with the cutting geometry to break chips reliably and guide them away from the cutting zone, improving surface quality while protecting the tool seat from premature damage. Geometry that supports stable clamping and consistent surface finish The parallelogram 85° form with a 15° clearance angle ensures a secure seat in compatible tool holders and promotes stable cutting forces. This geometry reduces vibration during interrupted cuts and improves the repeatability of each indexed position. Stable seating and a predictable rake/clearance combination contribute to a more even surface finish and tighter dimensional control on the workpiece. For workshops seeking reliable, repeatable results, the insert’s form factor and precision tolerance class support predictable performance across multiple indexing cycles. Easy integration and measurable productivity gains Designed for the Walter N‑Sortensystem, the indexable insert format allows rapid replacement and straightforward inventory management. The combination of uncoated carbide and the G88 chipbreaker offers a cost‑effective option where sharpness and chip control are decisive, such as finishing or light roughing of non‑ferrous components. Reduced secondary operations and simpler tool handling lower labour and machine time per part. For production environments that value throughput without sacrificing part quality, this insert delivers a practical balance of economy and performance. Contact Metav Werkzeuge for tailored cutting data, availability and advice on integrating the ADHT1606PER-G88 WXN15 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: ADHT1606PER-G88-WXN15-WALTER Article designation: ADHT1606PER-G88 WXN15 Manufacturer: Walter Tools Product type: Milling indexable insert Series: Walter N‑Sortensystem Facts Size: 16 Thickness: 06 Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: H Special features Chipbreaker: G88 Grade: WXN15 (uncoated carbide) Intended materials: Non‑ferrous metals (N) Application note: Sharp, uncoated use for aluminium, copper, brass Format: Indexable milling insert (ADHT geometry) FAQ What materials is this insert intended for? The ADHT1606PER-G88 WXN15 insert is specified for non‑ferrous metals (N) such as aluminium, copper and brass, following the ISO 513 guidance noted in the product data. Is the cutting grade coated or uncoated? The insert uses an uncoated carbide grade, WXN15, optimised for sharpness and low adhesion in NE‑metal machining. How does the G88 chipbreaker affect performance? The G88 chipbreaker produces short, controllable chips in non‑ferrous materials and helps to reduce surface smearing and built‑up edge, improving finish and protecting the seat. Which tool series is this insert compatible with? The insert is part of the Walter N‑Sortensystem series and is intended for tool holders that accept ADHT‑style indexable inserts. What geometry features support stable cutting? The parallelogram 85° shape combined with a 15° clearance angle provides secure seating and reduced vibration, supporting consistent surface quality and dimensional control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory‑new product from Walter Tools.
ADKT0803PEL-F56 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP35S grade for reliable wear resistance and consistent chip formation; the parallelogram 85° geometry with 15° clearance supports secure seating and repeatable cutting performance. Order the insert directly via Metav Werkzeuge or request application support from our consultants for optimal tool selection. ADKT0803PEL-F56 WKP35S milling insert – Tiger‑tec Silver, F56 chipbreaker | Walter Tools The ADKT0803PEL-F56 WKP35S is a coated indexable milling insert designed for efficient machining of steel and cast iron in general milling applications. ADKT0803PEL-F56 WKP35S designation Tiger‑tec Silver coated carbide grade For steel (P) and cast iron (K) Parallelogram 85° with 15° clearance Consistent tool life through advanced coating technology The insert is built on a coated carbide substrate with Tiger‑tec Silver technology and the WKP35S grade, engineered to deliver wear resistance and stable performance under cyclic thermal loads. The advanced coating reduces abrasive wear and supports a longer edge life, so machining cycles remain productive over time. By combining a robust grade with a proven coating system, the component offers predictable tool change intervals and lower overall tooling cost per part, which benefits process planning and quality assurance in series production. Better chip control and secure seating for steady surface finish Equipped with the F56 chipbreaker, the geometry promotes controlled chip formation and evacuation when cutting steels and cast irons, which helps to maintain consistent cutting forces and reduce vibration. The parallelogram 85° shape together with the 15° clearance provides secure clamping and accurate seat location in standard tool holders. This combination improves repeatability and contributes directly to an improved surface quality, reducing the need for secondary finishing and saving downstream processing time. Versatility across steel and cast‑iron applications Classified for ISO groups P / K, this insert is suited for a wide range of unalloyed and alloyed steel grades as well as abrasive cast iron materials. The designation 08 for plate size and 03 for thickness mean the insert fits compact milling cutters where space and rigidity require smaller indexable geometry. The tolerance class K ensures consistent interchangeability in production environments, supporting quick setups and minimal downtime when inserts are rotated or replaced. Productivity and process reliability for machining operations Combining the WKP35S coated grade with the Tiger‑tec Silver platform yields a balance between cutting-edge durability and broad material coverage. This results in stable cutting edge behaviour and reliable tool life across mixed batches or changing workpiece materials. For manufacturers focused on repeatable output and reduced scrap rates, the insert supports higher uptimes and contributes to predictable cycle times, reinforcing consistent throughput in demanding milling operations. For tailored advice on applying Walter Tools Tiger‑tec Silver inserts such as ADKT0803PEL-F56 WKP35S, contact Metav Werkzeuge for availability and application recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADKT0803PEL-F56-WKP35S-WALTER Designation: ADKT0803PEL-F56 WKP35S Label: Fräswendeschneidplatte ADKT0803PEL-F56 WKP35S Walter Tools Series: Tiger‑tec Silver Manufacturer: Walter Tools Core data Size: 08 Thickness: 03 Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: K Special features Grade: WKP35S (coated carbide) Material application: P / K (steel and cast iron) Execution: T Stable chip formation and broad material coverage Designed for reliable productivity in general milling FAQ Which materials are best machined with this insert? The ADKT0803PEL-F56 WKP35S milling insert is specified for ISO groups P and K, making it suitable for a range of steel grades and cast iron components. What benefit does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances the coated carbide grade by increasing wear resistance and thermal stability, which helps the WKP35S grade maintain cutting-edge integrity over longer production runs. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes predictable chip formation and reliable evacuation, improving cutting stability and contributing to consistent surface finish in milling operations. Is this insert compatible with standard tool holders for ADKT‑style seats? The ADKT0803PEL-F56 WKP35S matches standard ADKT seat geometries; the parallelogram 85° form and 15° clearance are designed for secure clamping in compatible milling cutter bodies. What length of tool life can be expected compared with uncoated grades? While actual life depends on cutting parameters and workpiece material, the WKP35S grade with Tiger‑tec Silver typically offers improved life and process stability versus comparable uncoated or older coated grades. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADKT0803PEL-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WSP45G grade for extended tool life and stable chip control in mixed-material milling; the insert’s Parallelogram 85° form and 15° clearance angle deliver secure seating and reliable cutting performance. Order ADKT0803PEL-F56 WSP45G milling inserts directly via Metav Werkzeuge or consult our specialists for application support. ADKT0803PEL-F56 WSP45G milling insert — Tiger·tec Gold, Parallelogram 85°, Walter Tools The ADKT0803PEL-F56 WSP45G is a parallelogram-style milling insert engineered for versatile face and shoulder milling across steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating for extended life Designed for P, M and S material groups Parallelogram 85° form for secure seating 15° clearance angle for stable cutting Consistent tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade provides improved wear resistance and consistent edge behaviour under the thermal loads typical of milling. This PVD-coated carbide is formulated as a tough, versatile grade for milling operations and is optimised to support reliable chip formation when machining steels, stainless steels and nickel‑based alloys. The result is reduced flank wear and longer service intervals, which contributes directly to predictable productivity and lower operating costs. Geometry that secures positioning and cutting stability The insert’s Parallelogram 85° outline and the 15° clearance angle combine to deliver a robust seating and an effective relief geometry. The parallelogram shape allows stable clamping in dedicated holders and supports indexability for multiple cutting edges, while the clearance angle reduces rubbing at the flank, lowering cutting forces and heat generation. The integrated F56 chipbreaker is tuned to break and evacuate chips reliably in a range of feed and depth settings, improving process security and surface finish in general milling tasks. Tolerance class K ensures repeatable fitting and alignment in standard toolholders. Practical benefits for production and process reliability With a common insert size designation (size 08, thickness 03), this indexable plate fits standard milling tool systems and simplifies inventory management. The grade’s suitability for the ISO material groups P, M and S means fewer tool variants are required across mixed‑material production, enabling higher machine uptime and reduced tool changeovers. The plate’s construction supports predictable wear progression and consistent surface quality, so setups remain stable and cycle times are easier to maintain. For customers seeking a balance between tool life and edge stability in demanding milling applications, this insert offers a pragmatic, production‑ready option. Contact Metav Werkzeuge for tailored application advice or a quotation for Walter Tools Tiger·tec Gold inserts Technical Data Article number: ADKT0803PEL-F56-WSP45G-WALTER Designation: ADKT0803PEL-F56 WSP45G Manufacturer: Walter Tools Facts Free angle: 15° Plate form: Parallelogram 85° Size: 08 Thickness: 03 Tolerance class: K Special features Series: Tiger·tec Gold Grade: WSP45G (PVD coated carbide) Chipbreaker: F56 Applicable materials: P, M, S FAQ What materials can this insert machine effectively? The ADKT0803PEL-F56 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for machining steels, stainless steels and heat‑resistant superalloys. How does the Tiger·tec Gold coating help in milling? The Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and thermal stability during milling, extending tool life and supporting safer chip formation. What is the benefit of the parallelogram 85° form? The Parallelogram 85° geometry provides secure seating and repeatable indexing in compatible holders, increasing clamping stability and enabling multiple usable cutting edges. Which chipbreaker suits general milling operations? The F56 chipbreaker is designed for versatile milling, promoting consistent chip control across typical feeds and depths used in face and shoulder milling. Is the insert compatible with standard toolholders? The ADKT0803PEL-F56 format (size 08, thickness 03) corresponds to common milling insert dimensions and is compatible with holders that accept the ADKT‑style geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADKT0803PER-F56 WAK15 Wendeplatten - Walter Tools
Take advantage of a sharp, low-adhesion geometry and the WAK15 uncoated carbide grade to improve cycle stability when machining aluminium and other non-ferrous alloys; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADKT0803PER-F56 WAK15 milling indexable insert — Walter Tools The ADKT0803PER-F56 WAK15 is a milling insert engineered for efficient machining of aluminium and non‑ferrous metals, offering a sharp cutting edge and optimised chip control for consistent production results Uncoated carbide for aluminium machining 15° relief angle for sharp cutting action Parallelogram 85° shape for versatile entry Walter N-series grade WAK15 for NE‑metals Precise cutting performance for aluminium and NE‑metals The combination of the WAK15 grade and an uncoated carbide substrate gives a reliably sharp cutting edge that reduces material adhesion and burr formation when working with aluminium and similar materials. The integrated chipbreaker F56 is engineered to promote short, controllable chips, decreasing downtime from chip entanglement and improving surface finish. This results in fewer secondary operations and a more predictable cycle time, which supports higher overall productivity on both small-batch and continuous runs. Geometry that stabilises the process and reduces tool changes The parallelogram 85° plate form together with a 15° relief angle provides an advantageous approach angle for many face and shoulder milling tasks, lowering cutting forces and improving entry behaviour. The insert thickness and form ensure consistent seat contact in common toolholders, which maintains repeatable clamping accuracy and reduces the need for frequent tool re‑adjustment. Such geometric consistency directly contributes to reduced scrap rates and steadier throughput in series production. Seamless integration and predictable economics As part of the Walter N‑series, this insert is specified for non‑ferrous applications and slots easily into existing tooling systems designed for standard negative geometry inserts. The concise geometry and designated material class make tool selection straightforward, shortening setup time and simplifying inventory management. Over time, the combination of reliable chip control and durable edge form delivers measurable savings through lower rework rates and less machine downtime. Contact Metav Werkzeuge for tailored advice and to secure the Walter Tools ADKT0803PER-F56 WAK15 insert for aluminium machining Technical data SKU: ADKT0803PER-F56-WAK15-WALTER Label: Fräswendeschneidplatte ADKT0803PER-F56 WAK15 Walter Tools Product type: milling indexable insert Brand: Walter Tools Core specifications Relief angle: 15° Plate form: Parallelogram 85° Insert size: 08 Plate thickness: 03 Tolerance class: K Materials & special features Grade: WAK15 (uncoated carbide) Chipbreaker: F56 Series: Walter N‑Sortensystem Application: aluminium and other non‑ferrous metals (ISO N) FAQ What materials is this insert designed for? The ADKT0803PER-F56 WAK15 insert is specified for aluminium and other non‑ferrous metals; the WAK15 grade and chipbreaker F56 are optimised for these materials. Can this insert be used in standard negative holders? Yes, the parallelogram 85° form and negative geometry suit standard toolholders for milling indexable inserts, ensuring stable clamping and repeatable positioning. How does the F56 chipbreaker help in production? The F56 chipbreaker produces short, controllable chips during aluminium machining, reducing the risk of chip entanglement and improving surface finish consistency. Is the insert coated? The WAK15 designation indicates an uncoated carbide grade tailored for sharp cutting performance in NE‑metals. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADKT0803PER-F56 WKP25S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WKP25S grade ensures productive, wear-resistant machining of steel and cast iron, while the F56 chipbreaker plus parallelogram geometry maintain consistent chip control and surface quality; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADKT0803PER-F56 WKP25S milling insert – Tiger·tec Silver, 15° clearance (Walter Tools) The ADKT0803PER-F56 WKP25S is a milling insert engineered for productive finishing and machining operations in steel and cast iron, combining a coated-carbide grade with a dedicated chipbreaker and parallelogram geometry. Tiger·tec Silver coating for high productivity WKP25S coated carbide grade for stable wear Suitable for machining steel and cast iron Parallelogram 85° insert with 15° clearance High-performance coating and grade for reliable machining The insert uses Tiger·tec Silver technology paired with the WKP25S coated-carbide grade to deliver stable tool life under the typical thermal and mechanical loads encountered when machining steel and cast iron. The coating reduces flank wear and supports consistent cutting-edge behaviour, which translates into fewer tool changes and more predictable process windows. For workshops seeking improved repeatability, the coated grade offers a balance between wear resistance and toughness, helping to avoid premature edge chipping on interrupted cuts. Improved chip control and surface integrity for efficient processes A dedicated F56 chipbreaker combined with the parallelogram 85° geometry and 15° clearance promotes controlled chip formation and evacuation in medium to heavy cutting conditions. Controlled chips reduce the risk of re-cutting and protect the machined surface, resulting in better component finish and reduced secondary operations. The geometry also helps to distribute cutting forces favourably, which supports stable machining when using standard milling cutters and indexable heads. Process security and economical machining through precise design Tolerance class K, the compact plate thickness and size code (08/03) provide consistent seating and repeatable re-indexing in common cutter bodies. These attributes, together with the coated carbide substrate, contribute to process security during serial production and when machining mixed batches of steel and cast iron parts. The design supports straightforward insert indexing and inventory handling, allowing production planners to maintain throughput without complex rework or special settings. For application-specific recommendations on Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored tooling advice and fast availability Technical data Article number: ADKT0803PER-F56-WKP25S-WALTER Designation: ADKT0803PER-F56 WKP25S Manufacturer: Walter Tools Numerical data Clearance angle: 15° Insert size: 08 Thickness: 03 Geometry angle: 85° Special features Series: Tiger·tec Silver Grade: WKP25S (coated carbide) Material suitability: steel (P) and cast iron (K) Chipbreaker: F56 Tolerance class: K Execution: T FAQ What materials can this milling insert machine reliably? The ADKT0803PER-F56 WKP25S milling insert from Walter Tools is formulated for steel (ISO P) and cast iron (ISO K) applications; the WKP25S grade and Tiger·tec Silver coating are tuned to handle the typical heat and chip forms of these groups. How does the Tiger·tec Silver series improve machining performance? Tiger·tec Silver provides a multi-layer surface treatment that enhances wear resistance and edge stability; in the ADKT0803PER-F56 WKP25S this means longer consistent tool life and steadier component quality across production batches. What is the role of the F56 chipbreaker on this insert? The F56 chipbreaker controls chip shape and evacuation to prevent long, stringy chips and to support stable cutting forces; when combined with the parallelogram geometry and 15° clearance, it contributes to improved surface finish and fewer interruptions. Is the insert suitable for interrupted cuts or roughing operations? While the ADKT0803PER-F56 WKP25S is optimised for productive machining, the coated-carbide grade and robust chip control make it tolerant of moderate interruptions; for heavy roughing, consult Metav Werkzeuge for the best grade and geometry selection. Are the insert dimensions and tolerance suitable for series production? Yes—the insert’s classification (size 08, thickness 03) and tolerance class K ensure repeatable seating and reliable indexing, supporting consistent production runs when used in compatible cutter bodies. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Trademarked names and product designations remain the property of their respective owners. The offered item is an original, factory-new product from the manufacturer.
ADKT0803PER-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for a productive, cost-efficient milling process on steel and cast iron; order the ADKT0803PER-F56 WKP35S directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. ADKT0803PER-F56 WKP35S – Milling insert, Tiger·tec Silver, for steel & cast iron (Walter Tools) ADKT0803PER-F56 WKP35S is a parallelogram 85° milling insert engineered for robust, high-performance machining of unalloyed and alloyed steels as well as cast irons. Tiger·tec Silver coating technology WKP35S: optimised for steel and cast iron Parallelogram 85° form for versatile cutting 15° clearance angle for reliable chip control Enhanced productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade delivers a balance of wear resistance and thermal stability that supports higher cutting parameters with consistent edge life. The coating technology reduces adhesive wear and improves heat resistance, enabling longer tool life in continuous and semi-continuous cutting conditions. For practical terms, this means more uptime between indexings and a more predictable tool consumption rate during series production. The technology is particularly effective when machining typical ISO P materials (steels) and ISO K materials (cast iron), where heat and abrasive wear present distinct challenges. Geometry that supports process reliability and surface quality The parallelogram 85° insert form and the F56 chipbreaker are designed to control chip flow and adapt to a wide range of shoulder and slot milling operations. The 85° approach offers a compromise between robust cutting edge engagement and favourable tool-overhang behaviour, while the 15° clearance angle helps maintain consistent contact conditions and reduces rubbing that can lead to premature flank wear. Together these geometrical features promote reproducible surface finishes and stable cutting forces, which benefits both single-piece flow and batch production environments. Practical advantages for workshop application and tooling strategies The ADKT0803PER-F56 WKP35S insert is supplied in the common designation suited to modular milling systems, enabling straightforward integration into existing toolholders and inventory systems. The grade and chipbreaker combination supports a broad spectrum of machining tasks, from roughing to light finishing, reducing the need for multiple specialised insert types. As a coated carbide insert, it facilitates simplified tool management and cost calculations by extending the interval between indexings and regrinds. The material applicability P / K explicitly covers steel and cast iron, offering flexibility for mixed-production shops and subcontractors handling varied job lots. Contact Metav Werkzeuge for tailored application advice on the Walter Tools ADKT0803PER-F56 WKP35S and to arrange prompt supply via Metav Werkzeuge – eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: ADKT0803PER-F56-WKP35S-WALTER Designation: ADKT0803PER-F56 WKP35S Type: Milling insert Series: Tiger·tec Silver Grade: WKP35S Execution: T Form: Parallelogramm 85° Clearance angle: 15° Chipbreaker: F56 Thickness: 03 Size: 08 Tolerance class: K Facts Applicable material groups: P / K Steel application: yes Cast iron application: yes ISO designation included: ADKT0803PER-F56 WKP35S UID: ADKT0803PER-F56-WKP35S-WALTER Special features Coating technology: Tiger·tec Silver Carbide substrate: coated cemented carbide Optimised for abrasive and thermal loads typical of steel and cast iron Parallelogram geometry for versatile milling engagements F56 chip control geometry for stable chip formation FAQ What materials is this insert suited for? The ADKT0803PER-F56 WKP35S insert is designed for ISO groups P and K, meaning it is suitable for machining steels and cast irons with the WKP35S grade and Tiger·tec Silver coating. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver improves thermal resistance and wear behaviour on the cutting edge; on the WKP35S grade this results in longer edge life and more consistent performance when milling steel and cast iron. Which geometry advantages does the parallelogram 85° form provide? The parallelogram 85° form balances edge strength and entry angle, offering robust performance in shoulder and face milling while helping to control cutting forces and vibration. Is the chipbreaker suitable for both roughing and finishing? The F56 chipbreaker delivers controlled chip formation across a range of depths and feeds, making it versatile for roughing and for lighter finishing passes with stable surface results. Can the insert be used in existing modular holders? The ADKT0803PER-F56 WKP35S follows common industrial designation and indexing conventions, allowing integration into compatible milling systems without special adapters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns.
ADKT0803PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance, consistent chip control and versatile material capability for efficient milling operations; order directly via Metav Werkzeuge or consult the specialists for application support. ADKT0803PER-F56 WSP45G Parallelogram milling insert, Tiger‑tec Gold — Walter Tools The ADKT0803PER-F56 WSP45G is a coated carbide milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in general machining applications. Tiger‑tec Gold PVD coating, high wear resistance For steel, stainless steel and heat‑resistant alloys Parallelogram 85° form for secure clamping F56 chipbreaker for controlled chip formation Durable coating for longer tool life and stable cutting The combination of Tiger‑tec Gold coating and a coated carbide substrate delivers measurable improvements in tool life and process consistency. The PVD layer enhances wear resistance and reduces abrasive wear at elevated temperatures, which is particularly relevant during high‑speed or interrupted milling. By focusing on reduced flank wear and improved thermal stability, the insert supports longer tool cycles and fewer changeovers, contributing to steady productivity and lower overall tooling costs. Versatile material capability with reliable chip control Designed for the ISO material groups P / M / S, the insert is suitable for machining unalloyed and alloyed steel, stainless steel (rostfreier Stahl) and heat‑resistant superalloys or titanium. The integrated F56 chipbreaker promotes stable chip formation across varied cutting conditions, reducing the risk of built‑up edge in stainless steels and improving swarf evacuation in tougher alloys. This controlled chip behaviour supports reliable surface finish and predictable tool performance during both roughing and semi‑finishing operations. Geometry that secures process stability and repeatability The parallelogram 85° insert form with a 15° clearance angle creates a rigid cutting geometry that improves clamping stability and enables consistent radial engagement. The compact plate format (size 08, thickness 03) and tolerance class K ensure interchangeability between indexable holders and repeatable positioning during index changes. These geometric attributes reduce vibrations and support a steady cutting edge, which translates to improved surface quality and repeatable machining results across production runs. Application benefits and process efficiency In practice, this insert performs well in both general‑purpose milling and more demanding applications where heat resistance and edge stability are required. The combination of the Tiger‑tec Gold technology and the insert’s chipforming design enables shorter machining cycles and fewer unscheduled stops for tool change. For manufacturers aiming at high throughput with consistent quality, the insert offers a pragmatic balance of productivity and process security, making it a dependable choice in mixed‑material production environments. Contact Metav Werkzeuge for application advice and availability: eMail info@metav-werkzeuge.com, tel +49 2822 7131930 Technical data SKU: ADKT0803PER-F56-WSP45G-WALTER Designation: ADKT0803PER-F56 WSP45G Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Form: Parallelogram 85° Free angle: 15° Thickness: 03 Plate size: 08 Tolerance class: K Execution: T Material class: P / M / S Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 15° Plate size: 08 Thickness: 03 Tolerance class: K Designs / Special features Tiger‑tec Gold PVD coating Coated carbide grade Suited materials: steel, stainless steel, superalloys and titanium Parallelogram 85° insert form F56 chipbreaker for chip control FAQ Which materials are recommended for this insert? The ADKT0803PER‑F56 WSP45G is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys/titanium in typical milling tasks. What does the F56 chipbreaker provide? The F56 chipbreaker on this Walter Tools insert promotes controlled chip formation and improved swarf evacuation, supporting stable cutting and better surface quality across varying machining conditions. How does the Tiger‑tec Gold coating help in production? Tiger‑tec Gold coating enhances thermal stability and wear resistance of the cutting edge, which extends tool life and maintains process security under demanding cutting speeds and interrupted cuts. Is the insert compatible with standard indexable milling holders? The insert’s parallelogram 85° form, size 08 and tolerance class K ensure compatibility with corresponding indexable tool holders designed for this geometry and size. What performance benefits can be expected in mixed‑material production? With its balanced combination of coating, chipformer and stable geometry, the insert supports fewer tool changes, consistent surface finishes and improved productivity when machining a mix of steel, stainless steel and heat‑resistant alloys. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used here for clarification purposes only and do not imply any association with our company. The offered article is an original, factory‑new product of the manufacturer.
ADKT10T3PER-F56 WKP35S T Wendeplatten - Walter Tools
Take advantage of the WKP35S grade and Tiger‑tec Silver coating for consistent chip control and long tool life; the parallelogram 85° geometry and 15° clearance angle ensure stable milling of steel and cast iron. Order directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. ADKT10T3PER-F56 WKP35S — Indexable milling insert, Tiger‑tec Silver, 15° clearance (Walter Tools) The ADKT10T3PER-F56 WKP35S is an indexable milling insert designed for high-process reliability in steel and cast-iron machining, combining a coated carbide grade with an F56 chipformer for stable chips and consistent surface quality Tiger‑tec Silver coated carbide Grade WKP35S for steel and cast iron Parallelogram 85° insert geometry 15° clearance angle for stable cutting Higher productivity through grade and coating The ADKT10T3PER-F56 WKP35S delivers a clear productivity advantage thanks to the WKP35S coated carbide grade from the Tiger‑tec Silver family. This combination was developed to cope with the heat and chip formation typical of steel (ISO group P) while also offering resistance against the abrasive tendencies of cast iron (ISO group K). The F56 chipbreaker actively shapes and breaks chips into manageable lengths, reducing interruptions and enhancing machine uptime. In practical terms this means fewer tool changes, more predictable cycle times and a measurable increase in throughput for series milling operations. Geometry that stabilises the cutting process The insert’s parallelogram 85° geometry and 15° clearance angle are designed to balance cutting forces with accessibility in common milling setups. The T3 thickness and size 10 designation ensure a compact cutting edge that still provides sufficient edge strength for interrupted and continuous cuts. Where component tolerances and surface finish matter, this geometry helps maintain a consistent cutting line and reduces vibration. The result is improved surface quality and repeatability, particularly in mixed-batch production where process stability is essential. Cost-efficiency through handling and versatility As an indexable milling insert, this design enables rapid indexing and straightforward tool management; worn edges are replaced in seconds rather than replacing a complete cutter. The suitability for both steel and cast iron reduces tooling variety and simplifies inventory. Paired tools benefit from the Tiger‑tec Silver coating’s wear resistance, which supports longer edge life and a lower cost per component in many applications. For engineering teams looking for dependable performance with reduced overhead, this insert represents a practical blend of durability and process economy. For application-specific cutting data, grade comparisons or to ensure optimal throughput with Walter Tools’ ADKT10T3PER-F56 WKP35S, contact Metav Werkzeuge for tailored recommendations and fast delivery. Technical data Article number: ADKT10T3PER-F56-WKP35S-WALTER Designation: ADKT10T3PER-F56 Full designation: ADKT10T3PER-F56 WKP35S Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger‑tec Silver Core data Insert size: 10 Thickness: T3 Clearance angle: 15° Insert geometry: Parallelogram 85° Chipbreaker: F56 Tolerance class: K Material suitability: P / K Special features Grade: WKP35S Coating: Tiger‑tec Silver (coated carbide) Suitable for: steel (P) and cast iron (K) Application: milling, general-purpose and semi-finish operations FAQ What materials is this insert suitable for? The ADKT10T3PER-F56 WKP35S is formulated for steel (ISO group P) and cast iron (ISO group K), combining Tiger‑tec Silver coating with a WKP35S grade to handle the thermal and abrasive demands of those materials. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this insert promotes short, controlled chips during milling, improving chip evacuation and reducing cycle interruptions when machining steel and cast iron with the ADKT10T3PER-F56 WKP35S. Is the geometry suitable for interrupted cuts? Yes. The parallelogram 85° geometry and T3 thickness give the insert edge strength and stability that support interrupted milling applications while maintaining surface quality. Can this insert be used in standard toolholders? The ADKT10T3PER-F56 WKP35S fits holders designed for ADKT‑type parallelogram inserts; check holder compatibility and clamping specifications to ensure correct seating and repeatable performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools and associated brand names are mentioned for identification and comparison purposes only and do not indicate any affiliation with Metav Werkzeuge.
ADKT10T3PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and a versatile WSP45G grade delivers extended tool life and consistent chip control for demanding milling tasks; the parallelogram 85° form with a 15° clearance angle further improves stability and surface finish. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. ADKT10T3PER-F56 WSP45G milling insert (Parallelogram 85°, 15° clearance) — Walter Tools A ADKT10T3PER-F56 WSP45G milling insert engineered for robust, versatile milling in steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold PVD coating for long tool life Suitable for steel, stainless steel and superalloys Parallelogram 85° form for stable milling 15° clearance angle and T3 thickness Reliable performance for demanding materials The ADKT10T3PER-F56 WSP45G is a PVD-coated grade from the Tiger·tec Gold family, developed to handle the heat and abrasion typical of milling steels and high-temperature alloys. The WSP45G mix offers a balance of toughness and wear resistance, which means fewer edge failures during heavy engagement. For production environments this translates into improved process reliability and longer intervals between index changes, supporting uninterrupted machining cycles. Geometry that enhances stability and finish A parallelogram 85° plate form combined with a 15° clearance angle reduces chatter and promotes even force distribution during milling. The specific chipbreaker F56 encourages controlled chip formation and evacuation, decreasing the risk of re-cutting and built-up edge. These geometric features yield a more consistent surface finish and greater dimensional stability of the workpiece, resulting in reduced rework and predictable cycle times. Clear material suitability and application benefits Designed for ISO groups P / M / S, the insert is suitable for unalloyed and alloyed steels (P), stainless steel (M) and heat-resistant superalloys and titanium (S). Explaining the groups helps in process planning: P indicates good behaviour under typical steel cutting temperatures, M highlights performance under adhesive tendencies and heat, and S underlines stability against thermal load. The T3 plate thickness and size 10 format provide a robust edge for medium to heavy milling passes while preserving replaceability and cost efficiency. Practical support and process integration Selection and implementation are supported by application guidance from Metav Werkzeuge; recommended use cases include slotting and face milling where consistent chip control matters. Combining the Tiger·tec Gold technology with the parallelogram geometry offers a pragmatic route to higher productivity with lower tooling overhead. For tailored recommendations, cutting‑parameter suggestions and inventory planning, Metav Werkzeuge provides direct consultancy and rapid supply options to keep production running smoothly. Contact Metav Werkzeuge for a bespoke recommendation on the Walter Tools ADKT10T3PER-F56 WSP45G insert and to arrange timely supply or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADKT10T3PER-F56-WSP45G-WALTER Designation: ADKT10T3PER-F56 ISO designation: ADKT10T3PER-F56 WSP45G Product type: milling insert / indexable plate Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Size: 10 Clearance angle: 15° Plate thickness: T3 Plate form: Parallelogram 85° Tolerance class: K Special features Chipbreaker: F56 Material suitability: P / M / S (steel, stainless steel, superalloys) Coating technology: Tiger·tec Gold (PVD) Robust geometry for stable milling FAQ What materials can this insert machine effectively? The ADKT10T3PER-F56 WSP45G insert from Walter Tools is suitable for ISO groups P, M and S, meaning it machines steel, stainless steel and heat‑resistant superalloys effectively. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the ADKT10T3PER-F56 enhances wear resistance and edge stability, extending service life and improving process reliability in continuous milling operations. How does the parallelogram 85° form affect cutting? The parallelogram 85° geometry increases cutting stability and reduces vibration, so the ADKT10T3PER-F56 delivers better surface finish and predictable dimensional results. Which chipbreaker is fitted and what is its purpose? This plate features the F56 chipbreaker, designed to ensure controlled chip formation and evacuation for consistent cutting forces during milling. What plate thickness and size are available for this SKU? The insert is supplied in thickness T3 and plate size 10 under the SKU ADKT10T3PER-F56-WSP45G-WALTER. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for identification and explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered item is original and brand‑new from the manufacturer.
ADKT1204PEL-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of reliable wear resistance, precise chip control and broad material suitability for uninterrupted production. Benefit from the Tiger·tec Silver coating and the WKP35S grade for longer tool life and consistent results — order directly via Metav Werkzeuge or consult the Metav team for application advice. ADKT1204PEL-F56 ADKT1204PEL-F56 WKP35S — WKP35S milling insert for steel and cast iron (Parallelogram 85°, 15°) – Walter Tools ADKT1204PEL-F56 WKP35S is a parallelogram milling insert designed for efficient machining of steel and cast iron in light to medium-duty applications Tiger·tec Silver coating for extended life Designed for steel and cast iron machining Parallelogram 85° form with 15° relief Chipbreaker F56 for controlled chip formation Consistent productivity through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP35S grade provides a balance of wear resistance and toughness that supports sustained machining cycles. The coated carbide construction resists abrasive wear typical of cast materials while controlling thermal loads during steel cutting. This results in reduced index changes, fewer interruptions for tool replacement and a measurable improvement in process reliability for batch and serial production. Geometry engineered for secure cutting and surface quality The parallelogram 85° geometry with a 15° relief angle is optimised to deliver stable engagement at the cutting edge and predictable chip flow. With the integrated F56 chipbreaker, chips are shaped and evacuated reliably, lowering the risk of re-cutting and helping to maintain consistent surface finishes. The insert form supports guided toolpath strategies and contributes to repeatable dimensional results across multiple workpieces. Practical integration and operational advantages Supplied in the ADKT1204PEL-F56 designation and executed in the specified tolerance class, the insert is compatible with common milling body systems that accept this form. The insert's characteristics—coated grade, chipbreaker geometry and parallelogram form—help reduce setup time and simplify tool inventory by covering both steel (P) and cast iron (K) applications. For shops seeking a balance between tool life and process stability, the insert supports cost-effective machining without sacrificing finish quality. Contact Metav Werkzeuge for tailored application guidance and to request sample inserts from Walter Tools' Tiger·tec Silver series Technical data Article number: ADKT1204PEL-F56-WKP35S-WALTER Designation: ADKT1204PEL-F56 WKP35S Product type: Milling indexable insert (parallelogram) Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Relief angle: 15° Form angle: Parallelogram 85° Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Suitable for: Steel (P), Cast iron (K) Execution: T Tolerance class: K FAQ Which materials can this insert machine effectively? The ADKT1204PEL-F56 WKP35S insert is suitable for machining steel (P) and cast iron (K), reflecting the WKP35S grade balance between wear resistance and toughness for these material groups. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this Walter Tools insert enhances abrasive wear resistance and thermal stability, helping to extend tool life and maintain consistent cutting performance in continuous operations. How does the F56 chipbreaker affect machining? The F56 chipbreaker is designed to control chip formation and evacuation, reducing the chance of long chips and improving surface finish while supporting safer, more efficient machining cycles. Is the parallelogram form important for toolholding and cutting direction? Yes. The parallelogram 85° form offers a defined cutting geometry that supports predictable engagement and is compatible with milling bodies designed for this insert family. What does the execution 'T' and tolerance class 'K' mean for workshops? The execution and tolerance class indicate the insert's specification for fit and dimensional accuracy; together they support reproducible clamping and interchangeability in systems specified for this insert form. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the manufacturers. The offered item is original and brand new.
ADKT1204PEL-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, precise F56 chip control and a stable parallelogram geometry for reliable milling of steels and high-temperature alloys; order the insert via Metav Werkzeuge or request application advice from our consultants. ADKT1204PEL-F56 WSP45G milling insert — Tiger·tec Gold, Parallelogram 85° The ADKT1204PEL-F56 WSP45G milling insert is a versatile indexable solution for finishing and roughing operations in steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating for longevity Suited for steel, stainless steel and superalloys Parallelogram 85° geometry for versatile milling 15° clearance angle with F56 chipbreaker Reliable performance and extended tool life The insert’s Tiger·tec Gold PVD layer and the WSP45G grade deliver consistent wear resistance and a stable cutting edge, which reduces frequency of tool changes and supports longer production runs. The combination of the coated grade and the engineered substrate provides controlled flank wear and maintains dimensional accuracy over longer tool life. As a consequence, process reliability improves and machine downtime is reduced, contributing to higher overall productivity in series production. Consistent chip control across demanding materials Equipped with the F56 chipbreaker and a 15° clearance angle, this geometry helps to form predictable chips and prevent re-cutting. The grade is optimised for machining groups P / M / S — that is, unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys/titanium — so the insert supports secure chip evacuation and stable cutting when facing typical thermal and mechanical loads of these materials. This leads to smoother surface finishes and fewer interruptions for manual chip removal. Geometry that supports flexible milling strategies The parallelogram 85° plate shape allows multiple entering angles and is suitable for both shoulder milling and more aggressive slotting strategies, while the compact plate size and low-profile thickness assist in achieving rigid clamping. The plate’s tolerance class K ensures repeatability when exchanging inserts, simplifying tool setup and reducing adjustment time between tool stations. For production environments where set-up consistency matters, this design helps maintain part tolerances and reproducible results. Practical advantages for workshop and production use As a milling insert from Walter Tools, the component is designed for ease of integration into established toolholders and machining cycles. The PVD coating and the balanced microgeometry support cost‑effective machining by enabling longer tool life and fewer interruptions. Technical documentation and cutting data are available for process planning, and the insert’s versatile application range reduces the need for multiple specialised grades, streamlining inventory and increasing operational flexibility. Contact Metav Werkzeuge for tailored cutting‑parameter recommendations or to discuss how the ADKT1204PEL-F56 WSP45G can be integrated into current machining processes Technical data Article number: ADKT1204PEL-F56-WSP45G-WALTER Product type: milling insert Brand: Walter Tools Numerical data Clearance angle: 15° Plate shape: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: K Design and features Coating / grade: Tiger·tec Gold (PVD), WSP45G Chipbreaker: F56 Applicable materials: P / M / S Execution: T Series: Tiger‑tec Gold FAQ What materials can be machined with this insert? The ADKT1204PEL-F56 WSP45G insert is specified for machining steel, stainless steel and heat‑resistant superalloys (P / M / S), offering secure chip formation across these groups. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes predictable chip shapes and reliable evacuation, which reduces re‑cutting and supports better surface finishes during milling operations. Is the insert suitable for both finishing and roughing? Yes, the parallelogram 85° geometry and the Tiger·tec Gold grade make this insert adaptable for a range of milling strategies from finishing to more aggressive material removal. What tolerance class does the plate comply with? This insert is supplied in tolerance class K, ensuring consistent fit and repeatable positioning in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
ADKT1204PER-F56 WAK15 Wendeplatten - Walter Tools
Take advantage of precise aluminium machining with the combination of the WAK15 uncoated carbide grade and the F56 chipbreaker for reduced built‑up edge; the 15° relief and parallelogram 85° form ensure low cutting forces and flexible toolpath control. Order these Walter Tools inserts directly via Metav Werkzeuge or contact our consultants for application advice. ADKT1204PER-F56 WAK15 milling insert — Parallelogram 85°, 15° relief | Walter Tools The ADKT1204PER-F56 WAK15 is a milling insert designed for efficient machining of aluminium and other non‑ferrous metals, combining a sharp uncoated carbide grade with a dedicated chipbreaker geometry. Uncoated carbide grade WAK15 for aluminium Parallelogram 85° form for versatile milling 15° relief angle for low cutting forces F56 chipbreaker reduces built‑up edge Maximise aluminium throughput with a purpose‑built carbide grade The uncoated WAK15 carbide grade is formulated for machining aluminium and non‑ferrous metals, offering a very sharp cutting edge that reduces friction and material adhesion. This results in stable chip formation and consistent removal rates when paired with appropriate feeds and speeds. For shops seeking repeatable productivity, the combination of a dedicated grade and a chipbreaker tailored to non‑ferrous work creates measurable efficiency gains while simplifying tool selection and tool‑life planning. Geometry that improves surface quality and tool stability The parallelogram 85° insert form with a 15° relief angle helps to lower cutting forces and reduce radial loading on the tool holder, which contributes to improved surface finish and longer tool‑holder life. The F56 chipbreaker is engineered to prevent built‑up edge typical of aluminium alloys, producing controlled, short chips that evacuate reliably. Together, these geometrical features reduce vibration and promote constant cutting conditions, making the insert suitable for both slotting and shoulder milling in demanding production environments. Practical integration and benefits for production workflows Specification details such as the 12 mm nominal size and 04 thickness enable predictable clamping and repeatable results in common milling toolholders. The insert is supplied within the Walter N‑Sortensystem range, allowing straightforward grade selection for different non‑ferrous alloys and easy replacement in existing indexable tool systems. With tolerance class K, users can expect consistent positional accuracy during index changes, which reduces setup time and supports higher first‑pass yields on serial components. For reliable aluminium machining with Walter Tools inserts, contact Metav Werkzeuge for ordering and tailored recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADKT1204PER-F56-WAK15-WALTER Item designation: ADKT1204PER-F56 ISO designation: ADKT1204PER-F56 WAK15 Manufacturer: Walter Tools Core data Insert size: 12 Thickness: 04 Relief angle: 15° Plate form: Parallelogramm 85° Chipbreaker: F56 Tolerance class: K Special features Grade: WAK15 Material: uncoated cemented carbide Suitable for: aluminium and non‑ferrous metals (ISO N) Series: Walter N‑Sortensystem Application: indexable milling insert FAQ What materials is this insert intended for? The ADKT1204PER‑F56 WAK15 insert is intended primarily for aluminium and other non‑ferrous metals, with the WAK15 grade and F56 chipbreaker optimised to prevent built‑up edge. How does the F56 chipbreaker affect machining aluminium? The F56 chipbreaker produces short, controllable chips that reduce adhesion and improve surface finish when machining aluminium with the Walter Tools insert ADKT1204PER‑F56 WAK15. What advantage does the 15° relief angle provide? A 15° relief angle reduces radial cutting forces and friction, leading to lower tool‑holder loading and a smoother cutting action in non‑ferrous milling operations. Is this insert compatible with standard Walter toolholders? Yes, the insert follows the Walter N‑Sortensystem specifications and fits common indexable milling toolholders designed for the ADKT form and size. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ADKT1204PER-F56 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver technology and the optimised F56 chipbreaker for stable, productive machining of steel and cast iron; the parallelogram 85° geometry and 15° relief angle provide reliable cutting performance and repeatable results. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. ADKT1204PER-F56 WKP25S indexable milling insert for steel and cast iron by Walter Tools The ADKT1204PER-F56 WKP25S is an indexable milling insert engineered for high-productivity face and shoulder milling in steel and cast iron, combining a Tiger‑tec Silver coating with an F56 chipbreaker for controlled chip formation. Tiger‑tec Silver coated carbide Optimised F56 chipbreaker Parallelogram 85° cutting geometry 15° relief angle for axial stability Greater process stability for steel and cast iron machining The coated carbide grade from the Tiger‑tec Silver series is designed to handle the thermal and mechanical demands of machining steel (P) and cast iron (K). By pairing a wear-resistant substrate with a tailored coating, the insert achieves consistent edge stability and predictable wear behaviour. For production environments, this means fewer unplanned tool changes and a more constant surface finish, improving overall process reliability. The controlled chip formation of the specified chipbreaker also reduces the risk of built-up edge and helps maintain dimensional accuracy over multiple indexings. Geometry and angles that improve tool life and accuracy A parallelogram 85° shape combined with a 15° relief angle gives the cutting edge improved entry conditions and lower radial direction loads. This geometry supports stable cutting forces when performing shoulder or face milling operations, helping to reduce vibration and tool deflection. As a result, the insert contributes to longer service intervals for the toolholder and more repeatable part tolerances, which is particularly relevant for high-volume production where consistency matters. Chip control and surface quality for efficient machining The F56 chipbreaker is optimised to produce short, manageable chips across a range of feed rates, which simplifies chip evacuation and reduces the chance of interference with the part or fixture. Better chip control translates into improved surface integrity and fewer secondary operations, so finishing times are reduced. In combination with the Tiger‑tec Silver technology, the insert supports both productivity and a high-quality surface finish, especially when machining common commercial steels and typical grey and nodular cast irons. Practical advantages for shop-floor application This insert’s design facilitates easy grade selection and predictable performance across typical workshop tasks. The coated carbide construction and proven series technology mean the component is suited to continuous operation in a broad set of machining scenarios. Tooling planners and process engineers benefit from reliable wear behaviour, while operators notice more stable cutting cycles and less frequent regrinding or replacement. For mixed-production environments handling both steel and cast iron, the insert offers a pragmatic compromise between generality and performance. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts and ensure optimal cutting parameters for specific steel and cast iron applications – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: ADKT1204PER-F56-WKP25S-WALTER ISO designation: ADKT1204PER-F56 WKP25S Series: Tiger‑tec Silver Grade / sort: WKP25S Chipbreaker: F56 Relief angle: 15° Insert shape: Parallelogram 85° Insert size: 12 Thickness: 04 Substrate / coating: coated carbide Core data Material application: steel (P) Material application: cast iron (K) Tolerance class: K Execution: T Materials & special features Optimised chip formation High process reliability for general machining Productive cutting behaviour Suitable for a broad range of steels and cast irons Stable cutting edge and predictable wear FAQ What materials is this insert suitable for? The ADKT1204PER-F56 WKP25S from Walter Tools is intended for machining steel (P) and cast iron (K), optimised for general production tasks. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver technology on the ADKT1204PER-F56 WKP25S enhances wear resistance and thermal stability, leading to more consistent tool life and improved surface finish in continuous operations. Which chipbreaker should be selected for mixed-production runs? The F56 chipbreaker integrated in this insert is designed for controlled, short chip formation across a range of feeds, making it a suitable choice for mixed steel and cast iron workloads. Does the geometry help to reduce vibration? Yes, the parallelogram 85° form and 15° relief angle on this Walter Tools insert reduce radial loads and help stabilise cutting forces, which decreases vibration and improves dimensional accuracy. Is this insert compatible with standard milling toolholders? The ADKT1204PER-F56 WKP25S follows common ISO indexable insert geometries and is compatible with holders specified for the corresponding insert type and size; check holder compatibility before assembly. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
ADKT1204PER-F56 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP35S grade for reliable machining of steel and cast iron, together with a 15° relief and parallelogram form that support stable cutting and predictable chip formation. Order the ADKT1204PER-F56 WKP35S directly via Metav Werkzeuge or request specialist advice for process integration. ADKT1204PER-F56 WKP35S – Milling indexable insert, Tiger·tec Silver, for steel & cast iron | Walter Tools The ADKT1204PER-F56 WKP35S is an indexable milling insert engineered for productive general milling of steel and cast iron, combining a robust coated grade with a Parallelogram 85° geometry. Tiger·tec Silver coating for long tool life WKP35S grade for steel and cast iron 15° relief angle for secure cutting Parallelogram 85° form with F56 chipbreaker Higher throughput through stable cutting performance The coated WKP35S grade, featuring Tiger·tec Silver, is designed for consistent milling of steel and cast iron, delivering a balance between wear resistance and toughness. The combination of a dedicated coating and the grade’s microstructure reduces flank and crater wear under typical cutting conditions, which supports longer tool life and fewer indexings. The 15° relief helps to control rake and cut engagement, improving surface quality while maintaining productivity. This results in measurable process gains where stable cutting edge condition is critical to cycle-time reduction. Reliable chip control and predictable material behaviour The F56 chipbreaker paired with the parallelogram 85° form promotes short, controlled chips when machining P and K groups according to ISO 513. The chip geometry is optimised for common steel and cast-iron chip characteristics, reducing the risk of entanglement and improving evacuation in face and peripheral milling operations. The insert’s geometry and chipbreaker work together to produce repeatable chip shapes, which simplifies coolant strategy and downstream chip handling while maintaining a consistent surface finish. Process security, repeatability and economical use Manufactured by a proven brand, this indexable insert supports high process security through a stable cutting edge and a tolerance class that ensures consistent seating in toolholders. Fewer tool changes and predictable wear behaviour translate into lower production interruptions and better overall economy per component. For application-specific cutting parameters or recommendations for clamping and toolholder choice, Metav Werkzeuge provides technical consultation to integrate the insert into existing machining routines and to optimise machining windows. For tailored cutting data, availability and fast supply of Walter Tools inserts like the ADKT1204PER-F56 WKP35S, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: ADKT1204PER-F56-WKP35S-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Relief angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness code: 04 Chipbreaker: F56 Tolerance class: K Special features Coating: Tiger·tec Silver Material suitability: P (steel), K (cast iron) Execution code: T Material designation: P / K WPL designation: ADKT1204PER-F56 FAQ Is this insert suitable for both steel and cast iron? Yes. The ADKT1204PER-F56 WKP35S from Walter Tools is formulated for ISO groups P (steel) and K (cast iron), offering good wear resistance on both material families. What is the relief angle and how does it affect cutting? The relief angle is 15°, which balances tool strength and cutting engagement to support stable cutting and good surface results in general milling. Which chipbreaker is integrated and what is its benefit? The F56 chipbreaker is integrated to promote short, controllable chips in typical steel and cast-iron machining, aiding chip evacuation and reducing re-cutting. What geometry does the insert have and when is it advantageous? The insert uses a parallelogram 85° form, well suited to face and peripheral milling where a defined entry and exit angle improves stability and tool life. Does the insert belong to a specific coating series? Yes. The insert is part of the Tiger·tec Silver series, offering a coated carbide solution for improved wear resistance and process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned only for explanatory purposes. There is no connection between our company and the named brands beyond the sale of original, factory-new goods of the manufacturer.
ADKT1204PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WSP45G grade for a durable, heat‑resistant cutting edge and reliable chip formation; the parallelogram 85° geometry and 15° clearance angle deliver stable engagement and repeatable results in demanding milling operations. Order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. ADKT1204PER-F56 WSP45G — Fräswendeschneidplatte by Walter Tools (Tiger·tec Gold, PVD) The ADKT1204PER-F56 WSP45G is an indexable milling insert engineered for versatile metalcutting applications, offering a PVD‑coated grade and geometry optimised for secure chip control and consistent surface quality. Tiger·tec Gold PVD coating for edge life For steel, stainless steel and superalloys Parallelogram 85° form for stable engagement 15° clearance angle for secure cutting High productivity through material‑matched grade and coating The insert combines the WSP45G grade with the Tiger·tec Gold coating to provide a balance of toughness and wear resistance that is particularly effective for milling operations in groups P, M and S (steel, stainless steel and heat‑resistant superalloys). This PVD‑coated cemented carbide grade reduces flank wear under elevated temperatures and supports predictable chip formation, which translates into fewer interruptions and higher output per tool. The objective information on the grade and coating enables reliable process planning and easier tool selection for production engineers. Stable cutting and improved surface finish from optimised geometry The parallelogram 85° insert form and integrated chipbreaker F56 work together to control chip flow and reduce vibration during side and shoulder milling. The geometry offers a stable contact angle that helps maintain tool life while producing consistent surface quality. Because the insert features a 15° clearance angle, the cutting edge is protected against rubbing and built‑up edge, leading to lower rework rates and a more efficient machining cycle. These technical choices are aimed at delivering measurable improvements in cycle stability and part quality. Reduced process risk and easier integration into existing tool systems The insert’s tolerance class K and standard designation facilitate reproducible clamping and interchangeability in modular milling systems. The format and thickness code allow straightforward comparison with other indexes and make tool management easier for procurement and production planning. By choosing this grade and form, workshop managers benefit from consistent edge behaviour across a range of steels and stainless grades, reducing trial runs and setup time. The specification notes such as form, chipbreaker and relief angle support informed decisions in CAM programming and fixture design. Practical guidance for application and tool handling For general roughing and medium finishing in steels and stainless grades, select feeds and speeds that respect the increased thermal load of M and S materials; the WSP45G grade is tuned to offer a compromise between toughness and wear resistance. The insert is suitable for conventional and climb milling where the parallelogram geometry provides positive engagement. When used in interrupted cuts or mixed batch work, the combination of chip control and PVD protection contributes to longer edge life and fewer tool changes. For machining strategies tailored to specific alloys, request application data from Metav Werkzeuge or consult machining charts from Walter Tools. Contact Metav Werkzeuge for tailored application advice, availability of the ADKT1204PER-F56 WSP45G from Walter Tools and assistance with tool selection and order processing; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number / SKU: ADKT1204PER-F56-WSP45G-WALTER Designation: ADKT1204PER-F56 WSP45G Manufacturer: Walter Tools Core characteristics Grade / Sort: WSP45G Series: Tiger·tec Gold Relief / clearance angle: 15° Form: Parallelogramm 85° Chipbreaker: F56 Plate size code: 12 Plate thickness code: 04 Tolerance class: K Materials & features Applicable workpiece groups: P / M / S (steel, stainless steel, superalloys / titanium) Coating technology: Tiger·tec Gold (PVD) Carbide base: coated cemented carbide Execution code: T ISO designation: ADKT1204PER-F56 WSP45G FAQ What materials is this insert designed to machine? The ADKT1204PER-F56 WSP45G is specified for material groups P, M and S, meaning it is suitable for a broad range including steel, stainless steel and heat‑resistant superalloys. How does the Tiger·tec Gold coating benefit milling performance? The Tiger·tec Gold PVD technology increases wear resistance at elevated temperatures while maintaining toughness, so the insert sustains cutting edge integrity over longer cycles. Which geometry provides the best stability for shoulder milling? The parallelogram 85° form combined with the F56 chipbreaker gives secure engagement and improved chip control, which supports stable shoulder and side milling operations. Is this insert compatible with standard holders for ADKT‑type plates? The ISO designation ADKT1204PER‑F56 aligns with common toolholder systems for this insert shape and size; users should verify clamping compatibility with their specific holder. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADKT1606PEL-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade combined with the robust F56 chipbreaker to achieve consistent, productive machining of steel and cast iron; order directly via Metav Werkzeuge or consult our technical team for tailored cutting data. ADKT1606PEL-F56 WKP35S milling indexable insert by Walter Tools — Parallelogram 85° geometry, 15° free angle The ADKT1606PEL-F56 WKP35S is a precision milling insert designed for high-productivity finishing and medium-depth roughing in steel and cast iron applications. Tiger·tec Silver coating for longevity Optimised for steel and cast iron machining Parallelogram 85° insert geometry Chipbreaker F56 for stable chip control Increased process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP35S substrate delivers a reliable cutting performance that addresses the typical heat and wear encountered when machining steel and cast iron. The coated carbide composition reduces flank wear and supports longer tool life under continuous operation, which improves uptime and lowers tool change frequency. This technical advantage translates into measurable productivity gains and a more predictable machining cycle without sacrificing component quality. Geometry and cutting edge tailored for repeatable surface quality The parallelogram 85° form and the 15° free angle create a stable engagement with the workpiece, reducing vibration and promoting consistent chip formation. Combined with the F56 chipbreaker, the insert produces controllable, short-to-moderate chips suited to both catalogue geometries and a range of milling strategies. These design choices result in improved surface finish and repeatable tolerances when producing batches or complex components. Application-focused versatility for mixed production environments Classified for machining groups P and K, this insert is a practical choice where a mix of unalloyed or alloyed steels and various cast irons must be processed with a single tooling family. The grade WKP35S is optimised within the Tiger·tec Silver series to balance wear resistance and fracture toughness, facilitating transitions between finishing passes and more demanding cuts without frequent tool swaps. The result is simplified tooling management and better throughput in multi-material shops. Clear technical benefits and predictable setup The ADKT1606PEL-F56 design, with a nominal size designation of 16 and thickness 06, offers an established licence in fixture and toolholder systems, making integration straightforward in standard milling heads. The insert’s tolerance class K ensures dimensional conformity suitable for automated tool management systems. These objective data points support quick setup, reliable regrinding or disposal cycles, and easier inventory control across production lines. Contact Metav Werkzeuge for availability and cutting-data support on Walter Tools Tiger·tec Silver inserts — our consultants provide tailored recommendations and operational parameters to optimise machining results Technical data SKU: ADKT1606PEL-F56-WKP35S-WALTER Article designation: ADKT1606PEL-F56 Brand: Walter Tools Series: Tiger·tec Silver Core data Insert size: 16 Thickness designation: 06 Free angle: 15° Geometry: Parallelogram 85° Tolerance class: K Special features Grade: WKP35S Chipbreaker: F56 Material applicability: P / K Applications: Steel, cast iron Execution: T FAQ What materials is this insert suitable for? The ADKT1606PEL-F56 WKP35S is specified for machining steel (P) and cast iron (K), reflecting the WKP35S grade and the Tiger·tec Silver coating’s balanced wear resistance. How does the F56 chipbreaker influence machining? The F56 chipbreaker promotes stable, predictable chip formation, supporting better surface finish and safer chip evacuation when milling steels and cast irons with the ADKT1606PEL-F56 insert. What are the geometric advantages of a parallelogram 85° insert? A parallelogram 85° geometry offers a robust cutting edge orientation that reduces axial loads and vibration, helping to maintain repeatable surface quality and extend insert life in milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADKT1606PEL-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, robust chipcontrol and a parallelogram form for reliable, repeatable milling results; order original inserts via Metav Werkzeuge or request advice from our consultants. ADKT1606PEL-F56 WSP45G milling insert, parallelogram 85°, 15° clearance – Walter Tools A compact ADKT1606PEL-F56 WSP45G milling insert engineered for versatile milling in steel, rostfreier Stahl and high‑temperature alloys, offering stable chip formation and consistent edge performance. Tiger‑tec Gold PVD coating for edge stability Parallelogram 85° form for versatile milling 15° clearance angle reduces cutting forces Suitable for steel, rostfreier Stahl and superalloys Increased productivity through a modern coating system The Tiger‑tec Gold coating, embodied in the WSP45G grade, combines a tough substrate with advanced PVD layering to extend usable life under cyclic thermal load. This translates into fewer tool changes and reliable edge stability during continuous production runs. The result is measurable process efficiency: longer uninterrupted cycles, more parts per shift and a predictable wear curve that simplifies maintenance planning. The coating technology also supports consistent surface finish, reducing secondary operations and improving overall throughput. Geometry that stabilises cutting and simplifies setup The parallelogram 85° plate geometry paired with a 15° clearance delivers a stable engagement angle for a wide range of milling strategies. The form factor promotes secure clamping and predictable entry/exit behaviour, which helps to dampen vibration and improve tool life. The integrated chipbreaker F56 encourages controlled chip segmentation, lowering the risk of built‑up edge and making chip evacuation more dependable. These design choices reduce process variability and make the insert suitable for both conventional and high‑feed milling tasks. Broad material capability for mixed‑material production runs Designed for P / M / S material groups, this grade supports machining of unalloyed and alloyed steel, rostfreier Stahl and heat‑resistant superalloys or titanium‑based materials. The WSP45G sort is a versatile PVD grade optimised for milling applications where material mix and batch variety are common. Using this insert reduces the need for multiple specialised grades on the tool trolley and simplifies inventory while maintaining consistent cutting performance across different workpiece materials. Consistent accuracy and simple integration into tool programmes Tolerance class K and the standard ADKT format allow predictable repeatability in multi‑edge toolholders and automated tool‑change systems. The compact thickness coding ensures compatibility with typical indexable milling holders, enabling straightforward integration into existing tool libraries and CAM programmes. Specifying genuine Walter Tools inserts helps maintain process security and surface quality, while the robust design supports reduced downtime and lower per‑part machining cost over extended production cycles. Contact Metav Werkzeuge for tailored cutting strategies and to arrange supply of genuine Walter Tools ADKT1606PEL-F56 WSP45G milling inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised consultation Technical Data SKU: ADKT1606PEL-F56-WSP45G-WALTER Article: ADKT1606PEL-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Clearance angle: 15° Plate form: Parallelogram 85° Size: 16 Thickness: 06 Chipbreaker: F56 Tolerance class: K Special features Material groups: P / M / S Coating technology: Tiger‑tec Gold / PVD Execution: T Suitable for: steel, rostfreier Stahl, superalloys Sort description: tough, versatile PVD grade for milling FAQ What materials can be machined with this insert? The WSP45G grade in the ADKT1606PEL‑F56 insert is specified for P / M / S groups, meaning it is suitable for machining steel, rostfreier Stahl and heat‑resistant superalloys. How does the chipbreaker F56 affect performance? The F56 chipbreaker on the ADKT1606PEL‑F56 promotes controlled chip formation and evacuation, reducing built‑up edge and improving machining stability in interrupted and continuous milling. Is the geometry compatible with standard toolholders? Yes; the ADKT format and tolerance class K ensure the insert fits conventional indexable milling holders and maintains repeatable positioning for automated machining systems. What benefit does the Tiger‑tec Gold series provide? Tiger‑tec Gold coating on the ADKT1606PEL‑F56 WSP45G provides improved thermal resistance and abrasion protection, which extends edge life and delivers more consistent surface quality across mixed batches. Can this insert be used for finishing and roughing? The design and grade of the ADKT1606PEL‑F56 WSP45G make it suitable for a range of milling operations, from finishing to medium‑duty roughing, depending on cutting parameters and machine capability. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter Tools brand and other named trademarks are the property of their respective owners. Protected trademarks and trade names are used solely for identification and explanatory purposes. The offered item is original, factory‑new merchandise from the manufacturer.
ADKT1606PER-F56 WAK15 Wendeplatten - Walter Tools
Benefit from the combination of the WAK15 carbide grade, a precise 15° clearance and the F56 chipbreaker for reliable, low-adhesion aluminium machining; order the ADKT1606PER-F56 WAK15 directly via Metav Werkzeuge or ask the consultants for application advice. ADKT1606PER-F56 WAK15 — Milling indexable insert for aluminium and non‑ferrous metals by Walter Tools The ADKT1606PER-F56 WAK15 is a milling indexable insert engineered for high-efficiency machining of aluminium and other non‑ferrous metals, offering a sharp cutting edge and geometry optimised to prevent material adhesion. Uncoated cemented carbide optimised for N materials 15° clearance angle for smooth cutting Parallelogram 85° geometry for stable engagement F56 chipbreaker minimises built‑up edge and improves chips High-efficiency grade for non‑ferrous machining that reduces rework The insert is supplied in the WAK15 grade, an uncoated cemented carbide designed specifically for machining aluminium and non‑ferrous metals. This composition provides exceptionally sharp cutting edges and a low tendency for adhesion, which translates into consistent surface quality and fewer interruptions for chip‑ or burr removal. In practice, the combination of the grade and geometry reduces the risk of built‑up edge and helps maintain predictable tool life in serial and single‑piece production. Geometry tailored to lower forces and stabilise cutting behaviour A parallelogram 85° plate form with a 15° clearance creates an axial and radial engagement that balances cutting forces and keeps the toolpath stable during interrupted cuts. The thin format (06 profile code) reduces cutting resistance, while the F56 chipbreaker actively controls chip formation to avoid long, stringy swarf that can interfere with workpiece finish. These characteristics make the insert suitable for high feed rates and dynamic milling strategies where chip control and thermal behaviour are critical. Practical advantages in tool management and process reliability Built for compatibility with the Walter N‑grade system, the design supports easy indexation and repeatable positioning in standard milling cutters. The tolerance K and the robust chip geometry contribute to predictable replacement intervals and simplified inventory control. For workshops focused on stable throughput and minimal secondary operations, this indexable plate delivers improved first‑pass quality and reduces downstream finishing effort, enhancing overall process economy. For expert availability and tailored recommendations on Walter Tools ADKT1606PER-F56 WAK15, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitable cutter bodies and machining parameters Technical data SKU: ADKT1606PER-F56-WAK15-WALTER Article designation: ADKT1606PER-F56 ISO designation: ADKT1606PER-F56 WAK15 Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Insert size: 16 Thickness code: 06 Clearance angle: 15° Plate form: Parallelogramm 85° Chipbreaker: F56 Special features Carbide grade: WAK15 (uncoated cemented carbide) Series: Walter N‑Sortensystem Suitable for: Aluminium and non‑ferrous metals Tolerance class: K Execution: T FAQ What materials are suitable for this insert? The ADKT1606PER-F56 WAK15 is intended for aluminium and other non‑ferrous metals, where its sharp, uncoated carbide grade minimises adhesion and improves surface finish. Is the cutting material coated or uncoated? This insert is supplied in an uncoated cemented carbide grade (WAK15), optimised for low friction and sharp cutting in N‑class materials. What does the F56 chipbreaker do? The F56 chipbreaker shapes and controls chips to reduce long, stringy swarf and minimise material reattachment on the cutting edge, improving machining stability. How does the parallelogram 85° geometry affect milling? The parallelogram 85° geometry offers controlled engagement angles that stabilise cutting forces and support reliable chip evacuation during heavy or interrupted cuts. Which cycle types benefit most from this insert? High‑feed and dynamic milling operations in aluminium and similar materials benefit from the ADKT1606PER-F56 WAK15 due to its chip control and low cutting resistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADKT1606PER-F56 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of cost-effective, wear-resistant Tiger·tec Silver coating and controlled chip formation for consistent machining results; this reduces downtime and supports stable batch production. Order the ADKT1606PER-F56 WKP25S milling insert directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. ADKT1606PER-F56 WKP25S ADKT1606PER-F56 milling insert for steel and cast iron — Walter Tools The ADKT1606PER-F56 WKP25S is a coated carbide milling insert designed for medium- to heavy-duty finishing and semi-finishing of steel and cast iron, offering robust chip control and stable cutting behaviour in serial production environments. Coated carbide Tiger·tec Silver grade Optimised for steel and cast iron Parallelogram 85° form for stable cuts 15° clearance and F56 chipbreaker Consistent performance with Tiger·tec Silver for steel and cast iron The combination of a coated carbide substrate and the Tiger·tec Silver coating provides a balanced performance profile that is particularly effective when machining steel and cast iron. The coating reduces adhesive and abrasive wear, which in turn extends tool life and preserves dimensional accuracy over longer tool cycles. For production environments where repeatability and low variation are critical, this insert delivers predictable wear behaviour and helps maintain cycle-time consistency, reducing interruptions for tool changes and rework. Geometry designed to improve cutting stability and surface finish The parallelogram 85° insert geometry, paired with a 15° clearance, offers a stable engagement angle that minimises deflection and vibration during milling. Combined with the F56 chipbreaker, this design promotes efficient chip formation and evacuation, lowering the risk of built-up edge and improving surface quality on the workpiece. The geometric choices reduce cutting forces in many applications, which supports higher feed rates and more reliable productivity without compromising finish. Industrial advantages: tolerance class and series-level reliability Built to tolerance class K and supplied in the Tiger·tec Silver series, the grade WKP25S is tailored for demanding shop-floor conditions where tool life and process security matter. The material designation P / K indicates suitability for standard steels and a range of cast irons according to ISO 513, so users gain flexibility across mixed-production runs. This insert supports a pragmatic balance between cutting-edge performance and economical operation, contributing to lower overall machining costs through fewer tool changes and consistent part quality. Contact Metav Werkzeuge today to discuss how the Walter Tools ADKT1606PER-F56 WKP25S milling insert can be optimised for specific materials or machining strategies and to arrange an application consultation with our specialists. Technical data Article number: ADKT1606PER-F56-WKP25S-WALTER Designation: ADKT1606PER-F56 ISO designation: ADKT1606PER-F56 WKP25S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP25S Chipbreaker: F56 Facts Plate size: 16 Plate thickness: 06 Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: K Special features Coated carbide (beschichtetes Hartmetall) Material suitability: P (steel), K (cast iron) Execution: T Series note: optimized for stable chip formation and productivity FAQ What materials is this insert suitable for? The ADKT1606PER-F56 WKP25S insert is suitable for machining steel (P) and cast iron (K) in accordance with the intended ISO material groups. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the ADKT1606PER-F56 WKP25S reduces abrasive and adhesive wear, improving tool life and maintaining cutting edge stability for longer production runs. What benefits does the parallelogram 85° geometry provide? Parallelogram 85° geometry enhances cutting stability and reduces deflection, which supports improved surface finish and consistent dimensional accuracy when using the ADKT1606PER-F56 insert. Which chipbreaker is integrated and what is its effect? This insert features the F56 chipbreaker, which promotes reliable chip control and evacuation, reducing the likelihood of built-up edge and improving process security. Is the ADKT1606PER-F56 WKP25S suitable for mixed-production environments? Yes; with its P / K material suitability and robust coating, the insert offers flexibility across runs that include both steel and cast iron, supporting consistent results. Protected trademarks and brand names remain the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The supplied article is an original, factory-new product of the stated brand. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADKT1606PER-F56 WKP35S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating and the WKP35S grade delivers longer tool life and reliable chip control for steel and cast iron machining; chosen for productive milling operations, this insert supports consistent surface quality and reduced downtime. Order the ADKT1606PER‑F56 WKP35S directly via Metav Werkzeuge or ask our consultants if needed ADKT1606PER‑F56 WKP35S — Indexable Milling Insert, Tiger‑tec Silver, for Steel and Cast Iron (Walter Tools) The ADKT1606PER‑F56 WKP35S is a parallelogram 85° indexable insert with a 15° clearance angle, optimised for productive milling of steel and cast iron Tiger‑tec Silver coating for high wear resistance WKP35S grade for steel and cast iron machining Parallelogram 85° geometry for stable milling F56 chipbreaker for controlled chip formation Extended tool life through coating and grade The combination of Tiger‑tec Silver coating and the WKP35S cutting grade is designed to reduce abrasive wear and maintain a stable cutting edge under the thermal and mechanical loads typical of steel and cast iron machining. Coating technology enhances heat resistance and reduces adhesion, which in turn extends tool life and increases intervals between indexings. This results in measurable productivity improvements and lower tooling costs per workpiece in continuous production. Geometry and chip control that improve process reliability The parallelogram 85° form and the F56 chipbreaker create a cutting geometry that stabilises the tool in the holder and produces predictable chip shapes. A 15° clearance angle supports positive cutting action and reduces rubbing, while the chipbreaker controls swarf to aid coolant access and evacuation. The result is improved surface finish and fewer interruptions from chip-related issues, which helps maintain cycle times and machine availability. Application focus: robust performance on steel and cast iron Specified for ISO groups P and K, this insert is suitable for a broad range of unalloyed, alloyed steels and cast irons, offering consistent performance across typical shop-floor materials. The design supports both roughing and semi-finishing strategies where reliable wear resistance and repeatable edge behaviour are priorities. When combined with a suitable toolholder and cutting parameters, the ADKT1606PER‑F56 WKP35S helps achieve stable, cost‑effective production results. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts with Tiger‑tec Silver coating and ensure the right indexable solution for steel and cast iron applications — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data Article number: ADKT1606PER-F56-WKP35S-WALTER Product name: ADKT1606PER-F56 WKP35S Product type: Fräswendeschneidplatte / indexable milling insert Series: Tiger‑tec Silver Brand: Walter Tools Facts Free angle: 15° Geometry: Parallelogram 85° Size: 16 Thickness: 06 Chipbreaker: F56 Tolerance class: K Special features Coating: Tiger‑tec Silver Grade: WKP35S Material suitability: Steel (P), Cast iron (K) Design: Parallelogramm 85° Execution: T FAQ What materials is this insert suitable for? The ADKT1606PER‑F56 WKP35S is designed for ISO material groups P (steel) and K (cast iron), making it suitable for a wide range of unalloyed and alloyed steels as well as cast components. How does the Tiger‑tec Silver coating benefit cutting performance? Tiger‑tec Silver increases heat resistance and reduces adhesion on the cutting edge, which helps extend the service life of the insert and maintain consistent performance under thermal load. What is the purpose of the F56 chipbreaker? The F56 chipbreaker provides controlled chip formation and evacuation, improving coolant access, surface finish and process reliability during milling operations. Which geometry advantages does the parallelogram 85° provide? The parallelogram 85° form stabilises cutting forces in milling, reduces vibration tendencies and supports secure seating in toolholders for consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADKT1606PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold technology and the WSP45G grade for consistent edge life and reliable chip control in mixed-material milling. The combination of a Parallelogram 85° geometry and the F56 chipbreaker delivers process stability and predictable tool performance — contact Metav Werkzeuge for application advice or speak with a consultant about stocking and delivery. ADKT1606PER-F56 WSP45G Fräswendeschneidplatte by Walter Tools — Tiger·tec Gold, P/M/S application ADKT1606PER-F56 WSP45G is an indexable milling insert designed for versatile high-performance milling across steels, stainless steels and heat-resistant alloys Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° geometry Chipbreaker F56 and 15° clearance Consistent milling performance with premium coating and grade The Tiger·tec Gold technology combined with the WSP45G grade provides a coated carbide solution engineered for a balance of toughness and wear resistance. This combination supports stable cutting edges under the heat and mechanical loads typical of milling operations, resulting in process reliability and longer tool life. The insert is suitable for the ISO material groups P / M / S, so the same grade can be used across unalloyed and alloyed steel, many stainless steels and demanding superalloys and titanium components, reducing the need for multiple specific grades and simplifying inventory. Geometry and chip control that reduce rework and improve surface quality The Parallelogram 85° shape and the chipbreaker F56 are designed to secure controlled chip formation and evacuation, especially in interrupted cuts and variable engagement. A 15° clearance supports a reliable cutting edge engagement while minimising rubbing, and the insert dimensions (size 16, thickness 06) with tolerance class K ensure repeatable seating and concentricity in indexable toolholders. These geometric features translate into fewer machining deviations, improved first-pass quality and reduced downstream finishing operations. Integration into the shopfloor for measurable productivity gains As an indexable insert built for production environments, the ADKT1606PER-F56 WSP45G fits standard milling toolholders and is compatible with common clamping systems, allowing fast index changes and low downtime. The grade’s robustness and the insert’s geometry contribute to predictable tool life and steady cycle times, which supports cost-efficiency in batch production. For workshops seeking to increase machine uptime and reduce tool consumption, this insert delivers tangible benefits through consistent performance and simplified grade management. Contact Metav Werkzeuge for tailored cutting data and application recommendations on Tiger·tec Gold inserts or to check current availability and delivery options Technical Data SKU: ADKT1606PER-F56-WSP45G-WALTER Article: Fräswendeschneidplatte ADKT1606PER-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Designation: ADKT1606PER-F56 Facts Insert size: 16 Thickness: 06 Clearance angle: 15° Geometry: Parallelogram 85° Chipbreaker: F56 Tolerance class: K Execution: T Applicable material groups: P / M / S Special features Coating technology: Tiger·tec Gold (PVD) Material: coated carbide Application focus: versatile milling in steels, stainless steels and superalloys Stable chip formation and edge retention Series: Tiger·tec Gold — WSP45G grade FAQ What materials is this insert suited for? The ADKT1606PER-F56 WSP45G is designed for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold enhances wear resistance and edge stability on the ADKT1606PER-F56 WSP45G, which helps maintain cutting performance under high temperatures and abrasive conditions. Which toolholders are compatible with this insert? The insert fits standard indexable milling toolholders designed for parallelogram-shaped inserts; ensure the holder accepts the ADKT series geometry and size 16 inserts. What role does the F56 chipbreaker play in milling? The F56 chipbreaker on the ADKT1606PER-F56 WSP45G promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of built-up edge during intermittent cuts. Is this insert suitable for high-speed milling? The combination of the WSP45G grade and the Tiger·tec Gold coating supports elevated cutting speeds in many steel and stainless steel applications, though cutting parameters should be adapted to the specific workpiece material and machine capabilities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. It is an original factory-new article of the manufacturer.
ADMT080302R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise parallelogram 85° geometry and a controlled F56 chipbreaker for stable, productive milling of steel and cast iron; order directly via Metav Werkzeuge or request expert advice from the consultancy team. ADMT080302R-F56 WKP35G — Indexable milling insert, Tiger·tec Gold (Walter Tools) The ADMT080302R-F56 WKP35G is an indexable milling insert engineered for productive machining of steel and cast iron, offering a tight tolerance class and a geometry optimised for reliable chip control. Tiger·tec Gold coating for extended tool life Suitable for steel and cast iron machining Parallelogram 85° form for versatile engagement WKP35G grade for consistent wear resistance Increased throughput through optimised coating and grade The combination of Tiger·tec Gold coating and the WKP35G grade provides a balance between adhesive and abrasive wear resistance, which directly translates into longer tool life and fewer changes on the machine. The coated cemented carbide substrate is designed to withstand the thermal and mechanical stresses typical when cutting steel, while also managing the abrasive tendencies of cast iron. This results in fewer interruptions, more consistent component quality and a measurable improvement in process economy when compared with uncoated alternatives. Geometry tuned for reliable chip control and surface finish The parallelogram 85° plate form and F56 chipbreaker create a cutting geometry that promotes predictable chip formation and evacuation. The positive engagement angle reduces cutting forces and vibration, improving stability in interrupted cuts and slotting operations. A 0.2 mm corner radius contributes to edge strength without compromising the achievable surface finish, making the insert suitable for both roughing and light finishing passes where stability and repeatability are required. Dimensional consistency and process integration Manufactured to a tolerance class M, the insert maintains repeatable seating and predictable tool life across batches, simplifying toolholder setup and calibration. The standard plate size (08) with a plate thickness of 03 ensures compatibility with common mill toolholders for indexable inserts of this geometry. The 15° relief angle supports a favourable cutting edge orientation that lowers heat generation at the flank, reducing the risk of early edge degradation and supporting longer cutting intervals. Practical benefits for production planning Specifying the ADMT080302R-F56 WKP35G enables planners to standardise inserts across a range of steel and cast iron operations, reducing inventory complexity and streamlining reordering. The design supports higher cutting speeds and promotes consistent chip breaking, which can reduce cycle times and improve machine uptime. Clear, catalogued material suitability and series information supports efficient process selection and easier integration into production recipes and CAM tool libraries. For ordering or to discuss machining strategies with Metav Werkzeuge, please contact the sales team via info@metav-werkzeuge.com or call +49 2822 7131930 — expert guidance and rapid supply options are available Technical data Article number: ADMT080302R-F56-WKP35G-WALTER Name: Fräswendeschneidplatte ADMT080302R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 03 Corner radius: 0.2 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Material designation: P / K Applicable materials: Steel, Cast iron Execution: T ISO designation: ADMT080302R-F56 WKP35G FAQ What materials is this insert suitable for? The ADMT080302R-F56 WKP35G insert from Walter Tools is specified for steel (P) and cast iron (K), reflecting the design and coating choices of the Tiger·tec Gold series. How does the F56 chipbreaker affect cutting performance? The F56 chipbreaker on the ADMT080302R-F56 WKP35G promotes controlled chip formation and evacuation, which reduces the risk of chip re-cutting and supports stable cutting conditions in both roughing and lighter finishing operations. Is this insert compatible with common toolholders for parallelogram inserts? Yes; the parallelogram 85° form and standard size (08) make the insert compatible with typical indexable milling toolholders designed for this geometry, enabling straightforward interchangeability. What advantage does the WKP35G grade offer in production use? The WKP35G grade provides a robust, coated carbide solution optimised for mixed demands of adhesive and abrasive wear, offering consistent tool life and predictable performance across batches — particularly valuable for repetitive production environments. How does the 0.2 mm corner radius influence tool life and finish? A 0.2 mm corner radius increases edge strength to resist chipping under load while remaining small enough to achieve acceptable surface finishes in finishing passes, striking a compromise between durability and appearance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original, factory-new goods of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com