SNMG190616-RP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade and the RP5 chipbreaker for reliable, high‑volume steel turning. The combination of a robust coated carbide grade and a square 90° geometry with a 1.6 mm corner radius delivers consistent edge stability and predictable chip control. Order the insert or consult Metav Werkzeuge for technical advice and procurement. SNMG190616-RP5 WPP30G – indexable turning insert by Walter Tools, for steel (P) SNMG190616-RP5 WPP30G is a square, 90° indexable insert designed for general steel machining; coated grade Tiger·tec Gold ensures wear resistance and process stability Tiger·tec Gold coated grade WPP30G Optimised RP5 chipbreaker for stable chips Square 90° insert with 1.6 mm corner radius Suited for steel machining (ISO group P) Consistent performance from a coated Tiger·tec Gold grade The Tiger·tec Gold technology and the WPP30G designation identify a coated carbide grade optimised for turning steel (P). The coating system reduces abrasive wear and helps maintain a sharp cutting edge under the thermal and mechanical loads typical in steel turning. As a result, shops gain improved tool life and more predictable part tolerances, which supports higher productivity and fewer interruptions during serial production. The grade is particularly effective where a balance of wear resistance and toughness is required. Geometry that delivers controlled chip formation and surface quality The insert’s RP5 chipbreaker, combined with the square 90° form and 1.6 mm corner radius, is engineered to produce regular chips and a stable cutting process. A 0° negative rake contributes to a robust cutting edge that resists chipping on interrupted cuts. For operators, this geometry means fewer unexpected tool changes and a smoother finishing pass, translating technical geometry into lower cycle-time variability and improved surface finishes on turned parts. Practical integration into production workflows With a standard size of 19 mm and a nominal thickness 06, the insert fits common turning toolholders and mounting systems, enabling quick toolset changes and inventory standardisation. The tolerance class M supports repeatable positioning and consistent cutting behaviour across batches. This combination of compatibility and robustness helps machining centres and contract manufacturers maintain throughput while reducing set‑up complexity and tool variance. For precision steel turning with the Tiger·tec Gold grade from Walter Tools, contact Metav Werkzeuge for procurement and machining advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG190616-RP5-WPP30G-WALTER Designation: SNMG190616-RP5 WPP30G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Insert form: Square 90° Size: 19 Thickness: 06 Rake/relief: 0° (negative) Tolerance class: M Chipbreaker: RP5 Special features Coating technology: Tiger·tec Gold Grade: WPP30G (coated carbide) Application group: Steel (ISO P) Series: Tiger-tec Gold Performance: Wear-resistant, stable chip formation FAQ What materials is this insert intended for? The SNMG190616-RP5 WPP30G by Walter Tools is specified for machining steel (ISO group P) and is optimised for the heat and chip characteristics typical of steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes controlled chip formation and consistent evacuation, which improves process stability and surface finish when using the SNMG190616-RP5 WPP30G insert. Which features contribute to longer tool life? The Tiger·tec Gold coating and the coated carbide WPP30G grade combine increased wear resistance with a tough substrate, resulting in extended edge life and reliable performance in steel turning. Is the insert suitable for interrupted cuts? Yes. The 0° negative rake and the robust square geometry provide a strong cutting edge suited to interrupted and heavy engagement turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG190616-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the RP7 chipbreaker for consistent chip control and long tool life; the square 90° geometry with a 1.6 mm corner radius provides robust edge strength for demanding turning operations. Order the insert directly via Metav Werkzeuge or consult the sales engineers for application-specific advice. SNMG190616-RP7 WKP30S turning insert — square 90°, Tiger‑tec Silver, Walter Tools SNMG190616-RP7 WKP30S is a square, indexable turning insert designed for reliable material removal in steel and cast iron applications Tiger‑tec Silver coating for wear resistance Optimised for steel and cast iron machining Square 90° form with 1.6 mm corner radius RP7 chipbreaker for stable chip control Consistent performance through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WKP30S grade gives coated carbide performance that balances wear resistance and toughness. This results in stable cutting edge behaviour under typical turning loads when machining steel and cast iron (ISO groups P and K). The coating reduces abrasive wear and helps maintain a consistent edge across production runs, which supports predictable tool life and more reliable process planning. For operations aiming to increase uptime, this translates into fewer tool changes and steadier component quality. Secure edge strength and geometry for heavy cutting A square 90° insert form with a 1.6 mm corner radius delivers increased edge strength and resistance to edge chipping on interrupted cuts or hard-to-machine sections. The negative 0° rake provides a robust cutting edge geometry suited to roughing and medium finishing passes where stability is paramount. The RP7 chipbreaker is engineered to shape and evacuate chips effectively in both long and short-chipping materials, reducing the risk of re-cutting and surface damage. Together, these features support higher material removal rates with controlled surface integrity. Practical benefits for workshop and production planning With a standardised geometry and series compatibility, the insert simplifies tooling choices across multiple lathes and toolholders. The SNMG form fits common square-pocket turning toolholders, enabling quick index changes and consistent clamping. The WKP30S variant is targeted at general-purpose applications in steel and cast iron, making it a cost‑efficient choice when balancing cutting speed, tool life and surface finish. Where process stability and repeatability are priorities, the keyed features of this insert help reduce setup variance and downstream inspection effort. For tailored advice on integrating Tiger‑tec Silver inserts into a production line, contact Metav Werkzeuge for application recommendations and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SNMG190616-RP7-WKP30S-WALTER Label: Drehwendeschneidplatte SNMG190616-RP7 WKP30S Walter Tools Series: Tiger‑tec Silver Grade: WKP30S Chipbreaker: RP7 Facts Size: 19 mm Corner radius: 1.6 mm Plate thickness: 06 Form: Square 90° Free cutting angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Silver Material: Coated carbide Suitability: Steel (P), Cast iron (K) Execution: G Baureihe: Tiger‑tec Silver FAQ What materials is this insert suitable for? The SNMG190616-RP7 WKP30S insert is specified for steel (P) and cast iron (K) machining according to the grade characteristics of WKP30S. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker controls chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions when using the SNMG190616-RP7 WKP30S insert. What cutting situations benefit from the square 90° geometry? Square 90° geometry with a 1.6 mm corner radius offers high edge strength for roughing and interrupted cuts; the geometry of the SNMG190616-RP7 WKP30S insert suits applications where durability is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SNMG190616-RP7 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the RP7 chipbreaker for consistent steel machining and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG190616-RP7 WPP10G — Indexable turning insert with Tiger‑tec Gold coating and RP7 chipbreaker (Walter Tools) The SNMG190616-RP7 WPP10G is a square 90° indexable turning insert optimised for steel applications, combining a wear‑resistant Tiger‑tec Gold grade with a controlled‑chip RP7 geometry for reliable production results. SNMG190616-RP7: Square 90° insert, 19 mm Tiger‑tec Gold coated, wear‑resistant grade RP7 chipbreaker for controlled chip formation 0° negative rake for stable cutting Consistent cutting performance for steels with reduced tool changes The combination of WPP10G grade and the Tiger‑tec Gold coating delivers predictable wear behaviour when machining steel, reducing unscheduled tool changes. The coated carbide substrate stabilises the cutting edge at elevated temperatures, which means longer intervals between indexings and fewer interruptions on production runs. This stability translates into measurable efficiency gains in medium‑ and high‑volume turning operations without sacrificing surface quality. Controlled chip formation to increase process reliability The RP7 chipbreaker is designed for consistent chip control under varying feeds and depths of cut, leading to fewer stoppages and safer swarf handling. Effective chip control lowers the risk of surface damage and machine downtime, particularly on interrupted cuts. For workshops aiming at throughput and repeatability, the combination of geometry and chipbreaker supports a steady workflow and helps maintain cycle‑time targets. Geometry engineered for stable cutting and dimensional accuracy The square 90° form with a 1.6 mm corner radius provides a robust edge for a broad range of turning operations, from finishing to medium roughing. The 0° negative rake angle increases edge strength and resists chipping under heavier radial engagement, which benefits accuracy and repeatability on challenging parts. Operators will notice improved resistance to mechanical overloads and a more forgiving response to process variations. Coating and grade that extend tool life and versatility The proprietary coating technology of the Tiger‑tec Gold series enhances oxidation resistance and reduces built‑up edge during common steel machining cycles. The WPP10G grade balances wear resistance and toughness, making it suitable across a wide steel spectrum as defined by ISO group P. This balanced performance lowers tooling cost per part and simplifies grade selection for mixed production environments. Practical application notes and handling tips The insert is supplied in the SNMG190616 form factor and is suitable for standard steel turning toolholders that accept square 90° indexable inserts. For best results, match feed and cutting speed to the workpiece steel grade and the chosen depth of cut; modest increases in coolant or lubricant flow often improve surface finish and extend cutting edge life. For machining campaigns with mixed steels, the WPP10G grade often provides the most economical compromise between longevity and surface quality. Contact Metav Werkzeuge today for tailored advice on integrating Walter Tools Tiger‑tec Gold inserts into production workflows — application assessment and ordering support available via eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: SNMG190616-RP7-WPP10G-WALTER Product name: SNMG190616-RP7 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 19 mm Corner radius: 1.6 mm Thickness code: 06 Corner angle: 90° Clearance angle: 0° (negative) Tolerance class: M Special features Grade: WPP10G (Tiger‑tec Gold coated carbide) Chipbreaker: RP7 Execution: G Recommended material group: P (steel) Series: Tiger‑tec Gold FAQ What materials is this insert intended for? The SNMG190616-RP7 WPP10G is designed primarily for ISO group P (steel) machining and performs well across unalloyed and alloyed steels. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating increases oxidation resistance and reduces edge wear at higher cutting temperatures, extending the effective service life of the insert. What are the benefits of the RP7 chipbreaker? The RP7 chipbreaker produces short, predictable chips under a wide range of cutting conditions, improving swarf control and reducing the likelihood of surface damage. Is the square 90° form suitable for roughing and finishing? Yes; the square 90° geometry with a 1.6 mm corner radius offers versatility for both finishing and medium roughing applications while maintaining edge strength. Can this insert be used on interrupted cuts? The 0° negative rake and robust graded carbide make the insert tolerant to interrupted cuts, enhancing resistance to chipping during shock loads. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
SNMG190616-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the RP7 chipbreaker and a 1.6 mm corner radius for dependable, high‑productivity turning of steel; the SNMG190616‑RP7 WPP20G delivers stable chip control and extended tool life — order directly via Metav Werkzeuge or contact our advisors for cutting data and application support. SNMG190616-RP7 WPP20G Drehwendeschneidplatte — Tiger·tec Gold coated carbide insert for steel machining (Quadrat 90°, 1.6 mm) — Walter Tools The SNMG190616-RP7 WPP20G is a square 90° indexable turning insert optimised for ISO P (steel) applications, combining a Tiger·tec Gold coated carbide grade with an RP7 chipbreaker to support productive, reliable metal‑cutting processes. Tiger·tec Gold coated carbide Designed for steel machining (ISO P) RP7 chipbreaker for stable chip control Square 90° insert with 1.6 mm corner radius Consistent wear resistance for predictable cycle times The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balanced wear profile that supports longer cutting intervals and reduced regrind frequency. Coated carbides provide a hard, thermally resistant surface that slows flank wear and protects the cutting edge at elevated temperatures typical for steel turning. This results in more consistent part quality across batch runs and fewer unplanned tool changes, supporting higher process reliability and improved overall equipment effectiveness. Stable chip formation and improved surface finish The RP7 chipbreaker is designed to produce short, controllable chips when machining steels, which reduces the risk of chip entanglement and workpiece damage. Controlled chip formation benefits downstream operations by limiting burr formation and helping to maintain a steady feed and depth of cut. For operators, this means a tangible improvement in surface finish and reduced manual handling—key advantages when repeatability and throughput are priorities in production environments. Robust geometry that enhances cutting stability A square 90° geometry with a 1.6 mm corner radius offers strength at the cutting edge and good versatility for a range of turning operations. The insert’s 0° negative relief contributes to a secure cutting edge orientation for tougher cuts, while the tolerance class M indicates consistent manufacturing precision. In practical terms, the geometry supports reliable clamping and repeatable indexation, reducing setup time and providing predictable tool behaviour during interrupted cuts or variable stock conditions. Suitability for steel and practical application notes The grade and coating combination is specified for steel (ISO group P), meaning this insert is intended for unalloyed and alloyed steels with the heat and chip behaviours typical of those materials. As an indexable insert, the component simplifies inventory and tool management by offering multiple cutting edges per part. For optimum results, select cutting parameters aligned with the insert’s grade and chipbreaker; for tailored recommendations or to confirm suitability for a specific steel grade or machining strategy, Metav Werkzeuge provides application consultation and cutting data. For material‑sensitive steel turning with the Tiger·tec Gold WPP20G grade, contact Metav Werkzeuge for tailored cutting data, availability and fast supply. Technical data Article number: SNMG190616-RP7-WPP20G-WALTER ISO designation: SNMG190616-RP7 WPP20G Series: Tiger·tec Gold Grade: WPP20G Geometry: Quadrat 90° Chipbreaker: RP7 Relief angle: 0° (negative) Corner radius: 1.6 mm Plate size: 19 Thickness code: 06 Execution: G Tolerance class: M Facts Insert size: 19 Corner radius: 1.6 mm Relief angle: 0° negative Thickness code: 06 Special features Coating technology: Tiger·tec Gold Material suitability: Steel (ISO P) Carbide: coated hardmetal grade Chip control: RP7 designed for short chips Geometry: Square 90° indexable insert FAQ What materials is this insert suitable for? The SNMG190616‑RP7 WPP20G is specified for steel (ISO P) applications; the WPP20G grade and Tiger·tec Gold coating are tuned to the heat and chip formation characteristics typical of unalloyed and alloyed steels. How does the RP7 chipbreaker improve machining? The RP7 chipbreaker on this indexable insert promotes short, controllable chips, improving chip evacuation and surface finish while reducing the risk of chip-related interruptions during turning. Is this insert available as original Walter Tools product? Yes, the SNMG190616‑RP7 WPP20G is an original factory‑new Walter Tools indexable turning insert and is supplied as a genuine part from the manufacturer. Where to get cutting data and technical advice for this insert? For detailed cutting parameters and application support for the SNMG190616‑RP7 WPP20G, contact Metav Werkzeuge; their advisors can provide tailored recommendations for specific steels and machining setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original factory‑new goods from the manufacturer.
SNMG190616-RP7 WPP30G Wendeplatten - Walter Tools
Benefit from a blend of high productivity, stable chip control and extended tool life thanks to the Tiger·tec Gold coating and the RP7 chipbreaker; order directly via Metav Werkzeuge or consult our specialists for application advice. SNMG190616-RP7 WPP30G indexable turning insert — Tiger·tec Gold, RP7 chipbreaker (Walter Tools) The SNMG190616-RP7 WPP30G is a square 90° indexable turning insert designed for steel turning, combining a Tiger·tec Gold coated carbide grade with an RP7 chipbreaker for consistent material removal. Tiger·tec Gold coating, enhanced tool life RP7 chipbreaker for controlled chips Square 90° form with 1.6 mm corner radius Improve cycle times through predictable chip formation The Tiger·tec Gold technology and the RP7 chipbreaker deliver consistent chip control during longitudinal and face turning of steel, reducing interruptions caused by unstable chips. The coated carbide composition of the WPP30G grade is optimised for the heat and chip formation typical of ISO P materials, which means machining parameters can be pushed to improve throughput while maintaining surface quality. This rational advantage translates into fewer tool changes and higher net productivity on batch and single‑piece production alike. Maintain accuracy with robust geometry and secure seating A square 90° plate form with a 1.6 mm corner radius and a 0° negative rake creates a stable cutting edge that resists chipping under interrupted cuts and heavy engagement. The insert’s tolerance class M and execution G ensure repeatable seating in standard toolholders, supporting dimensional consistency across runs. These geometry choices provide a clear technical benefit: stronger cutting edges for roughing and reliable edge life for finishing passes, which simplifies tooling planning and reduces process variability. Choose the right grade for steel-focused applications The WPP30G grade is a coated carbide from Walter Tools’ Tiger·tec Gold series, formulated for balanced wear resistance and toughness when machining a broad range of steels. For engineers and buyers seeking a versatile insert, this grade performs well across typical P materials and offers a good compromise between cutting speed and edge stability. Where higher cutting speeds and longer tool life are required, the coated surface reduces abrasive wear and maintains a sharper cutting geometry for longer, lowering tool consumption and enhancing overall process economy. Choose Walter Tools’ Tiger·tec Gold SNMG190616-RP7 WPP30G for dependable steel turning and reach out to Metav Werkzeuge for ordering or application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SNMG190616-RP7-WPP30G-WALTER Label: Drehwendeschneidplatte SNMG190616-RP7 WPP30G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Execution: G Numbers / Core Technical Data Inscribed circle: 19 Corner radius: 1.6 mm Plate thickness code: 06 Plate form: Quadrat 90° Rake angle: 0° (negativ) Tolerance class: M Special features / Versions Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RP7 Material application: steel (ISO P) Base designation: SNMG190616-RP7 ISO designation: SNMG190616-RP7 WPP30G UID: SNMG190616-RP7-WPP30G-WALTER FAQ What materials is this insert intended for? The SNMG190616-RP7 WPP30G is designed primarily for steel (ISO P) applications; the WPP30G grade is optimised for the heat and chip behaviour typical of these materials. How does the RP7 chipbreaker affect machining performance? The RP7 chipbreaker produces short, controllable chips in a wide range of cutting conditions, improving process stability and reducing secondary operations needed to manage chips when using the SNMG190616-RP7 WPP30G. Can this insert be used for finishing passes? Yes — with its 1.6 mm corner radius and stable geometry, the grade offers good edge strength for light finishing when cutting parameters are adjusted for surface quality. What distinguishes Tiger·tec Gold coating from standard coatings? Tiger·tec Gold is a multilayer coating system that enhances wear resistance and thermal stability on coated carbide, allowing higher cutting speeds and extended tool life for grades such as WPP30G from Walter Tools. Is the SNMG190616-RP7 compatible with standard toolholders? The insert follows standard SNMG geometry and the M tolerance class, making it compatible with matching toolholders designed for SNMG plates when seated correctly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG190624-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the RP5 chipbreaker and a robust 2.4 mm corner radius for consistent, economical turning of Stahl; order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. SNMG190624-RP5 WPP20G – indexable turning insert, Tiger·tec Gold coating (Walter Tools) The SNMG190624-RP5 WPP20G is a square 90° indexable turning insert engineered for high-productivity Stahl machining with a controlled-chip RP5 geometry and a wear-resistant coated-carbide grade. Tiger·tec Gold coated for long tool life RP5 chipbreaker for consistent chip control Square 90° plate with 2.4 mm corner radius 0° negative rake for robust cutting Increased process reliability for Stahl components The combination of Tiger·tec Gold technology and the WPP20G grade offers a reliable solution for demanding turning operations in Stahl. The multi-layer coating improves thermal stability and wear resistance, which reduces flank wear and extends tool life under typical turning temperatures. As a result, process interruptions are minimised and repeatability is enhanced. The substrate is a coated carbide, optimised for the heat and chip formation patterns associated with machining Stahl, and the grade composition balances wear resistance with fracture toughness to suit a wide range of turning tasks. Predictable chip formation and surface quality Controlled chip flow is achieved by the RP5 chipbreaker and the square 90° geometry, which together enhance surface finish and evacuate chips reliably in continuous and semi-continuous cuts. The 2.4 mm corner radius increases edge strength for interrupted cuts and shoulder work, while the 0° negative relief angle provides robustness on heavy cuts and stable engagement. These geometric choices translate into fewer insert changes and more consistent part quality, particularly where dimensional stability and repeatable finishes are required in production environments. Easy integration and repeatable performance on the shop floor The insert’s designation and tolerance class simplify tool management and process documentation: the design is a SNMG190624-RP5 style square insert, tolerance class M, with plate size 19 and thickness code 06 for straightforward toolholder matching. The combination of a universal coated grade and a versatile chipbreaker reduces the number of different inserts needed across varied Stahl components, improving inventory efficiency. For shops aiming to raise throughput, the insert supports predictable tool life and easier parameter transfer between machines, helping to keep setup times low and output consistent. Contact Metav Werkzeuge for cutting data, sample trials or to place a procurement enquiry by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data Article number: SNMG190624-RP5-WPP20G-WALTER Label: Drehwendeschneidplatte SNMG190624-RP5 WPP20G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Facts Plate size: 19 Plate thickness: 06 Corner radius: 2.4 mm Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RP5 Grade: WPP20G Series: Tiger·tec Gold Substrate/coating: coated carbide Execution: G Suitable material group: P (Stahl) FAQ What materials is this insert designed for? The SNMG190624-RP5 WPP20G insert is formulated for machining Stahl, with the WPP20G grade optimised for the heat and chip conditions typical of that material group. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this insert ensures controlled chip formation and efficient evacuation, which supports improved surface finish and reduced risk of chip-related interruptions when turning Stahl. Is the corner radius suitable for shoulder turning and interrupted cuts? The 2.4 mm corner radius provides enhanced edge strength for shoulder operations and offers greater resistance to chipping in intermittent cutting conditions. Which series and coating technology are applied to this insert? This insert belongs to the Tiger·tec Gold series and uses the WPP20G coated-carbide grade to combine wear resistance with toughness for productive turning. How does the 0° negative relief angle influence tool behaviour? The 0° negative relief angle increases insert robustness under heavy engagement, helping to maintain stability and protect the cutting edge during deeper cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is a brand of Walter AG Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG190624-RP7 WPP20G G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and the WPP20G grade for reliable performance in steel turning; the RP7 chipbreaker and 2.4 mm corner radius deliver consistent chip control and surface quality. Order or request consultation via Metav Werkzeuge for grade matching and supply. SNMG190624-RP7 WPP20G — Indexable turning insert, RP7 chipbreaker, Tiger‑tec Gold (Walter Tools) The SNMG190624-RP7 WPP20G is a square indexable turning insert designed for efficient steel machining, combining a Tiger‑tec Gold coated grade with a chipbreaker optimised for stable cutting and predictable chips Tiger‑tec Gold coating for stable wear RP7 chipbreaker for predictable chip control Square 90° SNMG shape, 19 mm size 0° negative rake and 2.4 mm corner radius Increase productivity with a grade made for steel machining The WPP20G grade from the Tiger‑tec Gold family offers a balanced combination of wear resistance and toughness tailored for steel applications. The coated carbide substrate and the multilayer coating system reduce flank wear and maintain cutting edge integrity over longer tool life, which translates into fewer indexings and lower tooling costs per component. The RP7 chipbreaker reliably segments and guides chips during medium to heavy cuts, improving process stability and reducing interruption from tangled swarf. For operations seeking a measurable uplift in cycle time and repeatability, this insert provides a pragmatic step toward more productive turning cycles. Designed geometry for consistent surface finish and clamp reliability The insert’s SNMG geometry—square with a 90° shape—and a corner radius of 2.4 mm combine to provide a robust cutting edge capable of good surface finishes on typical turned components. The 0° relief angle (negative) increases edge strength in interrupted cuts and heavy depth of cut scenarios, while the 19 mm size fits a wide range of standard toolholders. The RP7 chipbreaker is engineered to control chip formation across common feed and speed ranges used for steel, helping to protect the machined surface from secondary deformation and ensuring consistent part quality. Practical application notes for workshop implementation This indexable insert is intended primarily for turning steel grades as indicated; it is optimised for the thermal and chip‑forming behaviour typical of unalloyed and alloyed steels. The coated carbide construction supports moderate to high cutting speeds while preserving edge stability—beneficial in batch production and single‑piece flow alike. When integrating the insert into a toolset, select a compatible SNMG‑type toolholder and verify insert clamping torque to maintain repeatable positioning. Adjust cutting data progressively and monitor chip form; the RP7 breaker will show compact segmented chips when parameters suit the workpiece and coolant practice. Long‑term value through consistent process behaviour Choosing a coated Tiger‑tec Gold grade such as WPP20G focuses on process security and predictable tool life rather than maximal cutting speeds alone. The insert’s construction and chipbreaker design aim to reduce unscheduled stoppages caused by poor chip evacuation and rapid flank wear. This reliability supports lean production objectives by lowering variability and enabling stable machining windows. For manufacturers pursuing consistent part tolerances and surface quality in steel turning operations, the overall tool concept yields measurable operational benefits and easier planning for tool change intervals. Contact Metav Werkzeuge to specify the optimal insert grade and availability for your turning application — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply Technical Data Article number: SNMG190624-RP7-WPP20G-WALTER Product: Indexable turning insert SNMG190624-RP7 WPP20G Manufacturer: Walter Tools Facts Insert size: 19 mm Insert thickness: 06 Corner radius: 2.4 mm Relief angle: 0° (negative) Special features Grade: WPP20G (Tiger‑tec Gold coating) Chipbreaker: RP7 Shape: Square 90° Material group: Coated carbide Application: Steel FAQ What materials is this insert suitable for? The WPP20G grade is formulated for steel machining; the SNMG190624‑RP7 insert performs best on unalloyed and alloyed steels under typical turning conditions. What does RP7 chipbreaker provide during cutting? The RP7 chipbreaker on the SNMG190624‑RP7 promotes segmented and controllable chips, improving evacuation and reducing the risk of swarf entanglement during steel turning. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on WPP20G improves wear resistance and edge life under the heat and stress of steel cutting, supporting longer intervals between indexings. Which toolholders suit this insert geometry? The SNMG190624 geometry is compatible with standard SNMG‑type toolholders designed for 19 mm square inserts; ensure correct clamping and seat condition for repeatable results. How should cutting data be approached with this insert? Start with conservative speeds and feeds appropriate for coated carbide on steel, observe chip form and surface finish, then increase parameters until the RP7 chipbreaker produces compact chips and stable cutting is achieved. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer.
SNMG190624-RP7 WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the wear‑resistant WPP30G grade for steady productivity and longer tool life; the square 90° geometry with a 2.4 mm nose radius and RP7 chipbreaker ensures reliable chip control when machining Stahl. Order the SNMG190624-RP7 insert directly via Metav Werkzeuge or contact the consultants for machining recommendations. SNMG190624-RP7 WPP30G Drehwendeschneidplatte — Tiger‑tec Gold coated insert for Stahl machining by Walter Tools The SNMG190624-RP7 WPP30G is a square indexable turning insert tailored for general and semi‑finish turning of Stahl, combining a Tiger‑tec Gold coated carbide grade with the RP7 chipbreaker for consistent chip formation and robust edge security. Tiger‑tec Gold coating for extended tool life Robust RP7 chipbreaker for stable chips Square 90° form for versatile turning Optimised for Stahl under ISO group P Consistent cutting performance from advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP30G carbide grade prioritises wear resistance and process stability when machining Stahl. This coating system reduces flank and crater wear, which results in longer tool life and fewer interrupted setups. For production workflows that demand predictable performance, the coated grade offers a balance between toughness and hardness, limiting unplanned insert changes and helping to keep cycle times stable. The result is measurable productivity gains and lower tooling overhead across batch and serial turning operations. Geometry and chip control that improve surface quality and tool life A square 90° insert form paired with a 2.4 mm nose radius provides mechanical strength at the cutting edge, supporting higher feedrates without compromising dimensional control. The 0° (negative) free angle contributes to edge robustness for interrupted cuts and moderate depths of cut. The RP7 chipbreaker is designed to generate short, controllable chips in the ISO P range, reducing the risk of entanglement and improving coolant access. Together, these geometric features produce a better surface finish and reduce flank wear, which helps to extend the effective life of the cutting edge. Designed for practical use on ISO group P materials This insert is specified for machining materials classified under ISO group P, meaning it is suitable for unalloyed and alloyed Stahl. The WPP30G grade performs with a broad material coverage: a wear‑resistant characteristic for tougher operations while retaining enough toughness for general‑purpose use. Where frequent tool changes are costly, selecting this grade minimises downtime by offering a compromise between abrasion resistance and chipping resistance. For workshops that machine a variety of Stahl types, the insert reduces the need for multiple specialised grades. Ease of integration and support for process reliability The SNMG190624‑style insert fits common turning toolholders and benefits production environments that prioritise repeatability. Its standard dimensions and indexable format make stocking and tool management straightforward, lowering administrative effort. Backing the product, Walter Tools is known for product consistency and predictable results in daily machining. For specific application data, cutting parameter suggestions or to confirm compatibility with holder systems, technical support is available through Metav Werkzeuge to assist with integration and parameter optimisation. Contact Metav Werkzeuge for tailored recommendations on using the Walter Tools SNMG190624-RP7 WPP30G insert; phone +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and fast sourcing Technical data SKU: SNMG190624-RP7-WPP30G-WALTER Article designation: SNMG190624-RP7 WPP30G Manufacturer: Walter Tools Facts Insert size: 19 Nose radius: 2.4 mm Plate thickness: 06 Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP30G Chipbreaker: RP7 Plate form: Square 90° Series: Tiger‑tec Gold Material application: Stahl FAQ What materials is this insert best suited for? The SNMG190624-RP7 WPP30G insert is optimised for materials in ISO group P, notably various types of Stahl, offering reliable chip control and wear resistance for general turning tasks. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on the SNMG190624-RP7 promotes short, controlled chips when machining Stahl, improving swarf evacuation and reducing the risk of chip interference with the workpiece or tool. Can this insert handle interrupted cuts? Yes; the square 90° form combined with the 0° (negative) free angle and a 2.4 mm nose radius gives the insert good edge strength for interrupted or heavy‑engagement turning operations. Is the WPP30G grade suitable for high feeds or high speeds? WPP30G is a coated carbide grade engineered for balanced wear resistance and toughness in Stahl machining; it supports productive cutting conditions and helps extend service life under typical industrial feed and speed ranges. Which toolholders are compatible with this insert designation? The SNMG190624 insert format is compatible with standard SNMG holders designed for square 90° inserts; confirm the insert seat and clamping type on the chosen toolholder before assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of Walter Tools.
SNMG250924-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust RP5 chipbreaker and square 90° geometry for reliable steel turning and predictable tool life. Benefit from consistent chip control and stable cutting forces to keep production flowing. Order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge technical advisors for application support. SNMG250924-RP5 WPP20G — indexable turning insert, Tiger‑tec Gold, Walter Tools The SNMG250924-RP5 WPP20G is a square 90° indexable insert designed for ISO P (steel) applications, combining the Tiger‑tec Gold coated carbide grade with an RP5 chipbreaker and a 0° negative rake for stable machining. Tiger‑tec Gold coated carbide grade WPP20G Square 90° geometry for stable cutting RP5 chipbreaker for consistent chip control Optimised for steel machining (ISO P) Consistent performance for steel machining The insert is built on a coated carbide concept (Tiger‑tec Gold) that balances wear resistance and toughness for machining steel. The WPP20G grade offers a universal performance profile across common steel operations: it provides good edge stability and controlled wear so that the machining sequence runs with fewer interruptions. The combination of coating and substrate reduces flank and crater wear, which means longer intervals between indexings and a steadier process in batch or single‑piece production. Geometry and cutting behaviour that improve productivity With a square 90° geometry and a corner radius of 2.4, the insert delivers mechanical stability and predictable contact conditions during turning. The 0° (negative) rake reduces the risk of edge chipping under interrupted cuts and allows secure engagement in tougher passes. The RP5 chipbreaker is tuned for forming short to medium chips in steel, improving evacuation and reducing heat build‑up near the cutting edge. These design choices translate into fewer tool changes and a more constant surface finish on components. Versatility and process benefits in everyday use Designed expressly for ISO P materials, the insert covers a range of steel machining tasks from light finishing to more demanding medium cuts. The Tiger‑tec Gold technology and the RP5 chip control help maintain a steady cutting force, which supports machine reliability and operator predictability. For production planners and operators, this means higher uptime, reduced scrap risk and improved first‑pass yield when machining unalloyed and alloyed steels. For reliable steel turning with Walter Tools' Tiger‑tec Gold technology, contact Metav Werkzeuge to secure the SNMG250924-RP5 WPP20G insert and request tailored machining recommendations from Metav Werkzeuge. Technical data SKU: SNMG250924-RP5-WPP20G-WALTER Label: Drehwendeschneidplatte SNMG250924-RP5 WPP20G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Plate form: Square 90° Free rake angle: 0° (negative) Corner radius: 2.4 Plate size: 25 Plate thickness: 09 Tolerance class: M Special features Chipbreaker: RP5 Coating: Tiger‑tec Gold Material application: Steel (ISO P) Execution: G Base designation: SNMG250924-RP5 FAQ Which materials is this insert intended for? The SNMG250924‑RP5 WPP20G is specified for ISO P applications and is intended primarily for machining steel, including unalloyed and alloyed steels. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold increases resistance to wear and supports a stable cutting edge at elevated temperatures, extending the productive lifetime of the insert and maintaining consistent cutting performance. How does the RP5 chipbreaker influence machining? The RP5 chipbreaker promotes reliable chip formation and evacuation in steel turning, reducing the chance of entanglement and improving overall process stability with medium to short chips. Is the geometry suitable for heavy interrupted cuts? The square 90° form combined with a 0° negative rake and a 2.4 corner radius provides robust insert support and is well suited to interrupted or demanding turning operations where edge security is essential. Can this insert be used for finishing and roughing? Yes; the grade and geometry offer a balance that supports both finishing passes with good surface quality and medium roughing where edge protection and wear resistance are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG250924-RP5 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger‑tec Gold coated carbide grade and the RP5 chipbreaker for reliable chip control and extended tool life; the 25 mm square 90° geometry with a 2.4 mm corner radius delivers stable turning under interrupted cuts. Order this insert directly via Metav Werkzeuge or consult our team for application support. SNMG250924-RP5 WPP30G — Square turning insert for steel, Tiger‑tec Gold, Walter Tools The SNMG250924-RP5 WPP30G is a square, indexable turning insert designed for stable steel machining with a Tiger‑tec Gold coated carbide grade and RP5 chipbreaker. Tiger‑tec Gold coated, wear‑resistant grade WPP30G Square 90° insert, 25 mm size, 2.4 mm corner radius RP5 chipbreaker optimised for steel machining 0° negative rake for stable, interrupted cuts Consistent productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP30G grade gives a measurable improvement in tool life and process reliability when machining steel. The coating reduces flank wear and helps maintain a sharp cutting edge under thermal load. For production environments this means fewer tool changes and higher uptime: the insert’s coated carbide substrate resists abrasive and adhesive wear, making it suitable for both continuous and interrupted turning operations. The result is a predictable, repeatable cutting performance with improved component quality. Stable cutting geometry for heavy‑duty and interrupted cuts A square 90° shape and 0° negative rake produce a robust cutting geometry that resists chipping and vibration during heavy or interrupted cuts. The 2.4 mm corner radius increases edge strength for roughing passes while still allowing acceptable surface finish for semi‑finishing. Because negative rake tends to lower cutting forces on the insert body, toolholders and machine spindles benefit from reduced shock and deflection. This geometry therefore supports both productivity gains and dimensional stability on turned components. Precise chip control and process safety with RP5 chipbreaker The RP5 chipbreaker is engineered for efficient chip formation when machining ISO P materials (steel). Controlled chip curling and detachment minimise the risk of long, stringy chips that can impede machining and harm the workpiece or tool. Improved chip control also enhances operator safety and reduces secondary operations for chip removal. In short, the chipbreaker contributes directly to a more secure and efficient turning process while supporting consistent surface quality. Application guidance and selection benefits for production use This insert is optimised for steel applications according to ISO P recommendations and covers a broad range of turning tasks from robust roughing to semi‑finishing. Its 25 mm size and specified thickness deliver stable contact in common turning toolholders; the WPP30G grade balances wear resistance and toughness, making it suitable across varying cutting speeds and feeds. For shops seeking reduced downtime and reproducible results, this insert offers a pragmatic combination of durability and versatility in serial production. For machining steel with Tiger‑tec Gold performance and predictable chip control, contact Metav Werkzeuge for availability and tailored application advice. Technical Data SKU: SNMG250924-RP5-WPP30G-WALTER Designation: SNMG250924-RP5 WPP30G Grade: WPP30G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Size: 25 mm Corner radius: 2.4 mm Thickness: 09 Insert shape: Square 90° Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RP5 Substrate: coated carbide Application: Steel (ISO P) Geometry suited for interrupted cuts Series designation indicates high wear resistance FAQ What materials is this insert best suited for? The SNMG250924-RP5 WPP30G is optimised for machining steel (ISO P); the WPP30G grade and Tiger‑tec Gold coating are tuned to typical heat and chip formation in steel turning. How does the RP5 chipbreaker benefit production? The RP5 chipbreaker on the SNMG250924-RP5 provides controlled chip formation and fast chip breakage, reducing chip handling issues and improving process safety and uptime during steel turning. Is the insert suitable for interrupted cuts? Yes. The square 90° geometry combined with a 0° negative rake and a 2.4 mm corner radius offers high edge strength and resistance to chipping in interrupted and heavy‑cut conditions. Which toolholders are compatible with this designation? The SNMG standard designation fits any compatible indexable turning toolholder designed for SNMG inserts; toolholder selection should ensure secure clamping and correct axial orientation for the RP5 chipbreaker. What performance improvements are expected versus uncoated grades? Compared with uncoated carbide, the Tiger‑tec Gold coating and WPP30G grade deliver longer tool life and more consistent edge condition under thermal stress, translating into fewer tool changes and more stable production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SNMG250924-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger‑tec Silver grade, reliable RP7 chip control and a robust square geometry to keep turning operations productive and predictable; order the insert directly via Metav Werkzeuge or consult our advisors for cutting data and application matching. SNMG250924-RP7 WKP30S turning insert — Tiger‑tec Silver grade for steel and cast iron (Walter Tools) SNMG250924-RP7 WKP30S is a square turning insert engineered for stable, productive machining of steel and cast iron in general turning applications Tiger‑tec Silver coating, grade WKP30S RP7 chipbreaker for consistent chip control Square 90° form, corner radius 2.4 mm Designed for steel and cast iron machining Stable chip control for uninterrupted production The insert delivers consistent chip control through its dedicated RP7 chipbreaker, which is designed to produce short, controllable chips when machining both steel and cast iron. Shorter chips reduce the risk of entanglement and tool interference at the cutting edge, improving process reliability and allowing higher material removal rates. The result is fewer interruptions on the shop floor and a more predictable duty cycle for batch production. Coating and grade engineered for broad material coverage The WKP30S grade, realised in Tiger‑tec Silver coating technology, is optimised to balance wear resistance and toughness for a wide range of ISO‑designated workpiece groups P (steel) and K (cast iron). The multilayer coating reduces abrasive wear and helps maintain a sharp cutting edge across variable cutting conditions, which translates into longer tool life and a lower cost per component in many turning operations. Geometry that supports robustness and easy tool setup The square 90° form combined with a 2.4 mm corner radius offers a robust cutting edge that tolerates interrupted cuts and modest profile changes without premature chipping. The insert features a 0° (negative) clearance/rake configuration, providing a stable, blunt cutting geometry that absorbs cutting forces and is well suited to heavier cuts and less rigid setups. These geometry choices simplify toolholder selection and reduce the need for frequent tool changes. Practical benefits for workshop productivity and quality Incorporating this insert into a turning cycle can improve throughput while maintaining surface finish requirements typical for general turning jobs. The balanced properties of the grade and coating support reliable tool life, while the chipbreaker and geometry minimise machine downtime. For customers seeking an insert that handles mixed production runs involving both carbon steels and cast irons, this solution provides an efficient compromise between performance and operational simplicity. For tailored cutting data, application advice or to place an order for the Walter Tools SNMG250924-RP7 WKP30S turning insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SNMG250924-RP7-WKP30S-WALTER Article: SNMG250924-RP7 WKP30S Product type: turning insert Brand: Walter Tools Series: Tiger‑tec Silver Facts Size: 25 mm Corner radius: 2.4 mm Thickness code: 09 Form angle: 90° Clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP30S Chipbreaker: RP7 Material suitability: P (steel), K (cast iron) Plate form: square 90° Execution: G Manufacturer: Walter Tools FAQ Which materials is this insert intended for? The SNMG250924-RP7 WKP30S insert is specified for ISO groups P (steel) and K (cast iron) and is optimised to handle the heat and chip behaviour typical of these materials. What advantages does the WKP30S grade offer? WKP30S, in Tiger‑tec Silver technology, combines wear resistance with toughness to deliver stable tool life across mixed shop applications, making it suitable for both general finishing and semi‑roughing on steel and cast iron. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker produces shorter, controlled chips that reduce the chance of chip entanglement, improving process reliability and easing handling in automated or unattended turning operations. What does 0° (negative) clearance mean in practice? A 0° (negative) rake/clearance geometry creates a blunt, strong cutting edge that tolerates intermittent cuts and higher radial forces, favouring robustness over minimal cutting forces. Is this insert compatible with common toolholders? Compatibility depends on the specific toolholder seat and clamping system; the SNMG form is a standard square‑form insert, so selection should follow the toolholder manufacturer's recommendations and the required insert thickness and seat geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
SNMG250924-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a robust combination of wear-resistant coating and a purpose‑built chipbreaker to secure consistent tool life and reliable part quality in steel turning applications; order the inserts through Metav Werkzeuge or consult the technical team for application-specific setup. SNMG250924-RP7 WPP20G – Square turning insert with Tiger·tec Gold coating by Walter Tools The SNMG250924-RP7 WPP20G is a square 90° turning insert designed for productive steel machining with an RP7 chipbreaker and Tiger·tec Gold coated carbide Tiger·tec Gold coated grade WPP20G Optimised RP7 chipbreaker for steel turning Square 90° insert with 2.4 mm corner radius Designed for Stahl (P) machining Consistent performance for demanding steel turning The WPP20G grade, part of the Tiger·tec Gold family, is engineered as a coated carbide to withstand the thermal and mechanical demands of steel machining. The geometry and coating work together to reduce flank wear and stabilise the cutting edge under typical heat and chip‑formation conditions. This results in longer tool life and fewer tool changes, which supports higher overall productivity on batch and series production. The insert is particularly suitable for unalloyed and alloyed Stahl (P) where predictable wear behaviour is critical. Efficient chip control and improved surface finish Equipped with the RP7 chipbreaker, the insert provides defined chip formation and evacuation in medium to heavy turning conditions. The chip control is achieved by the combination of chipbreaker geometry and the coated grade, which together reduce recutting and heat concentration at the cutting zone. As a result, component surfaces are produced with enhanced consistency and less need for rework. The square 90° shape and 2.4 mm corner radius increase edge stability, allowing for stable feeds and better resistance to interruptions or entry/exit impacts. Economy through predictable tool life and process security With a negative 0° clearance and a medium tolerance class M, the insert is designed for robust turning where rigidity and repeatability matter. The coated grade supports a wide hardness spectrum typical for steel, so the cutting performance remains consistent across varying batches. Less frequent tool changes and stable cutting conditions translate into lower process downtime and a favourable cost‑per‑part ratio over production runs. For environments prioritising uptime and quality, this turning solution helps maintain throughput without compromising surface integrity. Contact Metav Werkzeuge for tailored recommendations on Walter Tools SNMG250924-RP7 WPP20G inserts and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG250924-RP7-WPP20G-WALTER Product type: Drehwendeschneidplatte (turning indexable insert) Designation: SNMG250924-RP7 WPP20G Grade: WPP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Key specifications Insert shape: Square 90° Plate size: 25 mm Corner radius: 2.4 mm Thickness: 09 Relief angle: 0° (negative) Tolerance class: M Materials & features Chipbreaker: RP7 Coated carbide grade: WPP20G (Tiger·tec Gold) Material application: Stahl (P) Execution: G Base designation: SNMG250924-RP7 FAQ What materials is this insert suitable for? The SNMG250924-RP7 WPP20G is formulated for machining Stahl (P), covering unalloyed and alloyed steels as specified for the WPP20G grade. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on this insert improves chip formation and evacuation during turning, which reduces recutting and helps maintain consistent surface quality with fewer interruptions. What is the advantage of the 2.4 mm corner radius? A 2.4 mm corner radius increases edge strength and resistance to impact at starts and stops, enabling more stable feeds and longer edge life under demanding turning operations. Is this insert appropriate for interrupted cuts? With a square 90° form and a negative 0° clearance, the insert offers robustness for applications that include interruptions, though machining parameters should be adjusted to suit the specific workpiece and setup. Which series does the insert belong to and what does that mean for wear resistance? Belonging to the Tiger‑tec Gold series, the WPP20G grade provides enhanced wear resistance and a stable cutting edge thanks to its coated carbide formulation, supporting repeatable performance. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarked names and product designations are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
SNMM120408-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coated grade and a dedicated HU3 chipbreaker delivers consistent chip control and extended tool life, making the insert a reliable choice for high-volume turning of Stahl components; order directly via Metav Werkzeuge or consult the specialists for process-specific recommendations. SNMM120408-HU3 WPP20G turning insert — Tiger·tec Gold grade for Stahl, Walter Tools A SNMM120408-HU3 WPP20G turning insert engineered for robust finishing and medium-turning of Stahl, offering a square 90° geometry and a controlled chipforming solution. Tiger·tec Gold coating for durable cutting Universal grade optimised for Stahl Square 90° geometry for stable cuts Corner radius 0.8 mm for repeatable finishes Reliable chip control and extended tool life with modern coating The WPP20G grade, part of the Tiger·tec Gold series, combines a wear-resistant coated carbide with a balanced microstructure to withstand the thermal and mechanical demands of machining Stahl. The coated structure reduces flank wear and improves edge stability, which in turn lengthens in-process life and lowers the cost per part. The HU3 chipbreaker is designed to deliver predictable chip shapes across a range of cutting parameters, reducing the risk of entanglement and improving machine uptime. For operations switching between finishing and light-medium turning, this insert supports consistency without frequent edge changes. Geometry designed for process security and surface quality The square 90° shape and corner radius 0.8 mm provide a rigid cutting edge that resists deflection in interrupted cuts and offers repeatable surface finish. The 0° (negative) relief angle supports robust edge strength when facing or turning sections with variable engagement, while the compact plate size maintains close tool-to-workpiece stability. These geometric choices make the insert especially suitable for fixtures and set-ups where runout and vibration are concerns, resulting in higher first-pass yield and reduced rework. Practical benefits for workshop integration and productivity With a focus on productive chip formation and broad material coverage for Stahl, this insert contributes directly to process efficiency. The coated grade helps to sustain cutting performance under elevated temperatures, enabling slightly higher cutting speeds or longer index intervals. For production environments that prioritise repeatability, the combination of a defined chipbreaker, consistent corner radius and a resilient coating reduces unplanned tool changes and supports predictable scheduling. For further machining data, parameters or cutting trials, the technical advisors at Metav Werkzeuge can assist with application-specific optimisation and parameter tuning. Contact Metav Werkzeuge for tailored tooling advice and to secure Walter Tools inserts for reliable, productive turning operations. Technical data SKU: SNMM120408-HU3-WPP20G-WALTER Article designation: SNMM120408-HU3 ISO designation: SNMM120408-HU3 WPP20G Product type: turning insert Brand: Walter Tools Measurements Plate size: 12 mm Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Square 90° Tolerance class: M Features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: HU3 Grade family: coated carbide Applicability: Stahl Execution: M FAQ What materials is this insert suited for? The SNMM120408-HU3 WPP20G from Walter Tools is developed primarily for machining Stahl as specified by the WPP20G grade. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases wear resistance and edge stability on the SNMM120408-HU3 WPP20G, which helps to extend index intervals and maintain surface quality under thermal loads. Which chip shapes can be expected with the HU3 breaker? The HU3 chipbreaker on this insert produces controlled, short to medium chips across typical turning parameters, reducing the risk of chip entanglement and improving process reliability. Is the square 90° geometry suitable for facing operations? Yes; the square 90° geometry combined with the 0.8 mm corner radius offers robust edge strength for facing and general turning tasks where rigidity and repeatability are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
SNMM120408-HU3 WPP30G Wendeplatten - Walter Tools
Take advantage of precise chip control, the wear-resistant Tiger·tec Gold grade and a robust square design for consistent steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMM120408-HU3 WPP30G — indexable turning insert, HU3 chipbreaker, for steel (Tiger·tec Gold) — Walter Tools The SNMM120408-HU3 WPP30G is an indexable turning insert designed for reliable steel machining, offering a Tiger·tec Gold coated grade and HU3 chip control in a square 90° format. Tiger·tec Gold coating for enhanced wear resistance HU3 chipbreaker for controlled chip formation Square 90° insert, 12 mm format 0.8 mm corner radius for robust cutting edges High-performance turning where economy matters The SNMM120408-HU3 WPP30G insert combines a Tiger·tec Gold coated cemented carbide grade with a purpose-designed HU3 chipbreaker to deliver stable cutting in a wide range of steels. The coded grade WPP30G is tuned for the heat and chip characteristics of steels (ISO group P), offering a balance of wear resistance and toughness that helps to extend tool life and reduce tooling cost per part. The square 90° geometry and 12 mm size enable predictable engagement and straightforward programming for standard turning operations. Secure edges and predictable chip behaviour A 0.8 mm corner radius and the HU3 chip control geometry create reliable edge strength and consistent swarf formation, which reduces the risk of edge chipping and machine stoppages. For manufacturers aiming to increase process uptime, the combination of a robust edge and controlled chips means fewer interruptions for tool changes and improved surface finishes without escalating cutting forces. The applied coating technology also improves thermal resilience, maintaining cutting performance under extended runs. Practical application guidance for production use This indexable insert is optimised for general steel turning; the grade is intended for unalloyed and alloyed steels where typical heat generation and chip forms occur. In practice, select cutting parameters that match your machine capability and the grade’s moderate hardness: moderate speeds with appropriate feed and depth settings will exploit the Tiger·tec Gold advantages while maintaining tool life. If additional data or parameter tuning is required, Metav Werkzeuge can provide tailored cutting recommendations and application notes. Reliability and brand assurance for series production Walter Tools offers proven geometry and material science in its insert series, supporting consistent, repeatable results in manufacturing environments. The coated carbide grade and precision tolerancing support process stability and help achieve consistent part quality. For shops that value dependable tool performance in serial production, this insert presents a pragmatic choice that balances wear resistance, edge security and versatility across standard steel turning tasks. For application-specific selection or to discuss how Walter Tools' Tiger·tec Gold inserts can improve machining performance in steel, contact Metav Werkzeuge for direct consultation and order placement. Technical Data Article number: SNMM120408-HU3-WPP30G-WALTER Article designation: SNMM120408-HU3 WPP30G Product type: Indexable turning insert Facts Geometry: Square 90° Plate size: 12 mm Corner radius: 0.8 mm Free (relief) angle: 0° (negative) Thickness designation: 04 Tolerance class: M Special features Grade: WPP30G (Tiger·tec Gold) Chipbreaker: HU3 Coating: Tiger·tec Gold coated cemented carbide Application group: Steel (ISO P) Execution: M FAQ What materials is this insert suitable for? The SNMM120408-HU3 WPP30G insert is specified for steel machining (ISO group P); the WPP30G grade is formulated for the chip and heat behaviour typical of unalloyed and alloyed steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, reducing the chance of long stringy chips and improving process reliability during turning operations. Is the corner radius suitable for roughing or finishing? The 0.8 mm corner radius offers a compromise between edge strength for roughing and the ability to achieve good surface finishes; it is well suited to semi-finishing applications in steel. Can this insert be used in automatic tool changers and indexable systems? Yes, the SNMM120408-HU3 WPP30G is an indexable insert designed for standard toolholders compatible with square 90° inserts; confirm holder compatibility and clamping specifications before assembly. What distinguishes the WPP30G Tiger·tec Gold grade? WPP30G belongs to Walter Tools’ Tiger·tec Gold coating technology; it combines a coated cemented carbide substrate with tailored surface properties to balance wear resistance and toughness for steel cutting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; The Walter AG (brand presentation: Walter Tools) is among the leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory-new product of the manufacturer.
SNMM120412-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust HU3 chipbreaker and square 90° geometry for stable, repeatable steel turning. Order the SNMM120412-HU3 WPP20G insert directly via Metav Werkzeuge or consult our specialists for application support. SNMM120412-HU3 WPP20G — Indexable turning insert, square 90°, for steel — Walter Tools SNMM120412-HU3 WPP20G is an indexable turning insert engineered for general steel turning applications, featuring a square 90° form, a 1.2 mm corner radius and Tiger‑tec Gold coating for enhanced wear resistance Tiger‑tec Gold coating for extended tool life Square 90° geometry for stable turning 1.2 mm corner radius for robust edge strength 0° negative rake for secure cutting engagement Consistent performance for steel turning operations The SNMM120412-HU3 WPP20G insert combines the WPP20G grade with Tiger‑tec Gold coating to provide predictable wear behaviour when machining steels classified under ISO 513 as group P. The grade is designed to balance wear resistance and toughness for a wide range of steels, making the insert suitable for both general finishing and medium‑depth turning. The square 90° geometry increases support at the cutting edge, which reduces vibration and helps maintain a consistent surface finish over extended tool life. By selecting a grade optimised for the thermal and chip‑formation characteristics of steel, the cutting process becomes more efficient and less prone to unexpected edge failure. Reliable chip control and secure cutting engagement The built‑in HU3 chipbreaker coordinates with the insert geometry to promote reliable chip formation and evacuation during continuous turning cycles. The chipformer design reduces the risk of snarling and improves machine uptime by lowering manual chip handling. The 0° negative rake increases the mechanical stability of the cutting edge, which is particularly beneficial for interrupted cuts or heavier depth‑of‑cut operations. Together, these features lead to fewer tool changes and a steadier production rhythm, translating into tangible productivity gains on the shop floor. Process security and repeatable tool life Using a coated cemented carbide grade from the Tiger‑tec Gold family gives predictable wear progression and strong flank‑wear resistance. The WPP20G sort is identified as a universal, wear‑resistant grade tailored for steel; this supports longer intervals between inspections and reduces unplanned downtime. Consistent performance fosters reproducible component quality and helps to plan tooling costs more accurately. For operations that demand both productivity and component conformity, the combination of grade, coating and geometry delivers a controlled, cost‑effective cutting solution. Practical integration and handling in production The square insert format and standard size facilitate straightforward mounting in common toolholders and simple inventory management. With a 1.2 mm corner radius and the thickness and tolerance class coded to industrial norms, the insert is straightforward to index and re‑use, aiding quick changeover during batch production. The compact, robust design reduces the risk of edge chipping during handling and installation. For workshops seeking to harmonise tooling across turning centres, the SNMM120412-HU3 WPP20G provides a dependable building block for consistent part production. For procurement or detailed application advice on Walter Tools inserts with Tiger‑tec Gold grade, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on the best setup and replacement strategy for your turning process Technical data Article number: SNMM120412-HU3-WPP20G-WALTER Name: Drehwendeschneidplatte SNMM120412-HU3 WPP20G Manufacturer: Walter Tools Facts Insert size: 12 Corner radius: 1.2 mm Rake angle: 0° (negative) Plate thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP20G Chipbreaker: HU3 Shape: Square 90° Material application: Steel (P) Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The SNMM120412-HU3 WPP20G insert is designed for steel (P) applications according to ISO 513 and performs reliably across unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the SNMM120412-HU3 improves wear resistance and thermal stability, extending tool life and supporting consistent surface finish in steel turning. What is the purpose of the HU3 chipbreaker? The HU3 chipbreaker promotes controlled chip formation and efficient evacuation, reducing interruption from tangled chips and improving cycle reliability. Can this insert handle interrupted cuts? Yes. The 0° negative rake and robust corner radius provide increased mechanical stability, making the insert suitable for interrupted or heavier cuts in steel. Which toolholders accept this insert format? The insert follows common square 90° indexable insert dimensions, making it compatible with standard turning toolholders designed for that form. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SNMM120412-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
High-performance machining needs are met by the combination of a wear-resistant Tiger·tec Gold grade and a stable square geometry: the result is reliable, repeatable turning of steel components with long tool life and consistent surface finish. Order directly via Metav Werkzeuge or consult our specialists for application-matched recommendations. SNMM120412-HU5 WPP20G turning insert — Tiger·tec Gold grade, square 90° for steel machining (Walter Tools) SNMM120412-HU5 WPP20G is a coated carbide turning insert designed for robust steel machining in production environments; its square form and HU5 chipbreaker support secure cutting and predictable chip formation. Tiger·tec Gold coated carbide grade WPP20G Optimised chip control with HU5 breaker Square 90° form for stable cutting 1.2 mm corner radius for edge strength Stable cutting performance with a premium coating The combination of the Tiger·tec Gold coating and the WPP20G grade delivers enhanced wear resistance and thermal stability during heavy-duty turning operations. Coating technology reduces flank wear and extends tool life, which translates into fewer interruptions for insert changes and a more consistent production flow. For machining steel (ISO group P), the grade is balanced to offer both durability and toughness, so tool life is extended while maintaining accuracy and repeatability. Reliable chip formation and surface quality The HU5 chipbreaker is engineered for controlled chip segmentation in typical steel turning tasks. By shaping the chips predictably, the breaker reduces the risk of entanglement and improves process safety. Combined with the negative 0° rake, this geometry helps achieve a stable cutting edge and a uniform surface finish, particularly in semi-finishing applications where dimensional consistency matters. The result is less rework and improved downstream handling. Mechanical stability and clamping security for production use The square 90° insert format and a 1.2 mm corner radius ensure robust edge support under radial loads, reducing the likelihood of chipping in interrupted cuts. The nominal 12 mm size and 4 mm thickness provide a solid contact area in common toolholders, while the tolerance class M assures interchangeability and accurate seating. Together these characteristics support high process reliability and predictable performance on automated lathes. Practical benefits for shop-floor productivity Choosing this turning insert from Walter Tools supports higher uptime through longer tool life and consistent chip control. The balance of wear resistance and toughness in the grade helps to lower overall tooling costs by reducing the frequency of index changes. For operations seeking a dependable standard insert for a wide range of steel grades, the combination of coated carbide, HU5 chip control, and a sturdy square geometry is a pragmatic choice that simplifies tooling management and enhances throughput. For application advice and fast availability of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and local stock information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMM120412-HU5-WPP20G-WALTER Product type: Turning insert Designation: SNMM120412-HU5 Grade: WPP20G Series: Tiger·tec Gold Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 1.2 mm Free rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: HU5 Shape: Square 90° Coating / material: Coated carbide (Tiger·tec Gold) Material suitability: Steel (ISO P) Execution: M FAQ What materials is this insert intended for? The SNMM120412-HU5 WPP20G turning insert is specified for machining steel (ISO group P), with the WPP20G grade optimised for the heat and chip characteristics typical of steel turning. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on this Walter Tools insert promotes controlled chip segmentation in steel turning, improving process safety and enabling consistent surface quality during continuous and interrupted cuts. Is the corner radius suitable for roughing or finishing? The 1.2 mm corner radius provides robust edge strength for roughing and semi-finishing; it balances strength and accuracy for applications where both stability and good surface finish are required. Can this insert be used in standard SNMM toolholders? The SNMM designation and square 90° form make the insert compatible with standard SNMM toolholders designed for this geometry, while the tolerance class M supports reliable seating and repeatable positioning. What are the key advantages of the Tiger·tec Gold grade? Tiger·tec Gold coating and the WPP20G grade increase wear resistance and thermal stability, resulting in longer tool life and more consistent results when machining a broad range of steels. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names belong to their respective owners. Brand names and protected product designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original factory-new merchandise from the manufacturer.
SNMM120412-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM30S grade for reliable machining of stainless steels and heat‑resistant superalloys; the square 90° form with a 1.2 mm corner radius and HU5 chipbreaker support stable chip control and long edge life. Order the insert directly via Metav Werkzeuge or consult the application specialists for tailored cutting data. SNMM120412-HU5 WSM30S indexable turning insert (square 90°, Tiger‑tec Silver) — Walter Tools SNMM120412-HU5 WSM30S is a square 90° indexable turning insert designed for demanding machining of stainless steels and heat‑resistant superalloys; optimised for stability under thermal and mechanical load Tiger‑tec Silver coated carbide grade WSM30S Designed for stainless steel and superalloys Square 90° form with 1.2 mm corner radius Negative rake 0°; HU5 chipbreaker geometry Proven grade for tough-to-machine materials The WSM30S grade in the Tiger‑tec Silver series combines a coated cemented carbide substrate with surface engineering that enhances heat resistance and wear protection. This configuration promotes stable chip formation when cutting stainless steels and nickel‑based alloys, which tend to work‑harden and generate heat. The result is more consistent tool life and fewer interruptions in production, supporting predictable cycle times and reduced regrinding frequency for the toolroom. Geometry tailored to strength and surface quality The insert’s square 90° form and 1.2 mm corner radius provide a robust cutting edge suited to medium‑duty roughing and finishing operations. A 0° (negative) relief angle increases edge stability under radial load, while the HU5 chipbreaker is shaped to control chip flow for long, stringy material behaviour typical of stainless and high‑temperature alloys. Together these features help maintain a consistent surface finish without sacrificing edge security during interrupted cuts. Process reliability and economical machining By pairing a resilient geometry with the Tiger‑tec Silver surface, the insert supports higher process stability and extended tool life, which lowers the frequency of insert changes and machine downtime. The combination of grade and chipbreaker allows for balanced cutting parameters that favour both metal removal rate and component quality. For specific feed and speed recommendations in particular machining setups, the Metav Werkzeuge application team can provide data based on machine type and part material. For tailored application advice on Walter Tools Tiger‑tec Silver inserts or to check stock and delivery options with Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data SKU: SNMM120412-HU5-WSM30S-WALTER Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Core data Insert size: 12 Thickness code: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Insert form: Square 90° Chipbreaker: HU5 Applications & features Coated cemented carbide Suitable for stainless steel (M) Suitable for heat‑resistant superalloys and titanium (S) Stable chip formation and edge security FAQ What materials is this insert suitable for? The SNMM120412-HU5 WSM30S insert by Walter Tools is specified for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), reflecting the grade’s focus on heat resistance and edge stability. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker is engineered to control chip formation in materials that tend to produce long, stringy chips; when combined with the Tiger‑tec Silver surface, it improves chip evacuation and reduces the risk of built‑up edge. When is the 1.2 mm corner radius recommended? A 1.2 mm corner radius increases edge strength and is beneficial for higher depth cuts and semi‑roughing where robustness is required; it also influences the achievable surface finish and should be chosen according to the part tolerance. Does the Tiger‑tec Silver coating improve tool life? Yes, the Tiger‑tec Silver coating on the SNMM120412-HU5 WSM30S insert enhances thermal stability and wear resistance, contributing to longer tool life and more consistent performance in demanding materials. What is the geometry and how does it impact setup? The square 90° insert with a 0° negative relief angle provides a strong cutting edge for axial and radial loads; toolholder selection must accommodate the insert form and negative rake to ensure correct seating and cutting clearance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMM120416-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated carbide grade and the HU3 chipbreaker for efficient, repeatable turning of steel; the square 90° form with a 1.6 mm corner radius delivers predictable edge life and stable machining results. Order the SNMM120416-HU3 WPP10G indexable insert directly via Metav Werkzeuge or ask our consultants for application guidance. SNMM120416-HU3 WPP10G – Indexable turning insert, Square 90°, for steel | Walter Tools The SNMM120416-HU3 WPP10G is a square, coated carbide indexable turning insert intended for general steel turning applications, combining a Tiger·tec Gold coating with an HU3 chipbreaker for reliable chip control and consistent tool life. Tiger·tec Gold coated carbide grade Square 90° body with 1.6 mm corner radius Optimised HU3 chipbreaker for steel turning Predictable performance for steel machining The Tiger·tec Gold-coated WPP10G grade offers a balance of wear resistance and toughness tailored to steel (ISO group P). The coated carbide substrate reduces flank and crater wear under typical steel cutting temperatures, which results in improved tool life and fewer insert changes in production. For operations prioritising cycle-time and repeatability, this insert helps to maintain stable cutting forces and consistent dimensional accuracy, supporting higher productivity and predictable process windows. Better chip control and surface quality The HU3 chipbreaker is engineered to form short, controllable chips when turning steels, lowering the risk of entangling or long stringy chips at common cutting parameters. Combined with a negative relief angle of 0° and the square 90° geometry, the insert supports robust cutting conditions and a reliable seating in the toolholder. The 1.6 mm corner radius provides strength at the cutting edge for heavier cuts while still enabling good surface finish when used with appropriate feeds and speeds. Practical benefits for workshop and production planning With tolerance class M and an industry-standard form, the insert integrates smoothly into existing tool systems and inventory processes. The WPP10G grade from Walter Tools is designed for broad applicability across unalloyed and alloyed steels, reducing the need for multiple specialised grades. This simplifies tool management, lowers downtime for tool changes and supports efficient cost-per-part calculations, making it a sensible choice for job shops and series production alike. For technical assessment or to procure the SNMM120416-HU3 WPP10G insert for steel turning, contact Metav Werkzeuge for tailored advice and order options: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number / SKU: SNMM120416-HU3-WPP10G-WALTER Product designation: SNMM120416-HU3 WPP10G Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: HU3 Relief angle: 0° (negative) Plate form: Square 90° Tolerance class: M Dimensions & core data Corner radius: 1.6 mm Plate size: 12 mm Thickness code: 04 Materials & features Coating: Tiger·tec Gold (coated carbide) Material group: P (steel) Application focus: steel turning according to ISO 513 Shape: Square 90° Chip control: HU3 chipbreaker FAQ What materials is this insert suitable for? The SNMM120416-HU3 WPP10G is designed for machining steel (ISO group P) and is optimised for the thermal and chip-formation characteristics of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP10G grade reduces abrasive wear and improves heat resistance, which extends the insert life under typical steel cutting conditions. What is the advantage of the HU3 chipbreaker? The HU3 chipbreaker produces short, well-controlled chips when turning steel, improving safety and surface finish while reducing interruptions from chip management. Is the insert suitable for heavy roughing cuts? The square 90° geometry with a 1.6 mm corner radius provides a robust edge for stronger cuts; match the feed and depth of cut to machine and holder rigidity for best results. Can this insert be used in standard toolholders? Yes, the SNMM120416-HU3 WPP10G follows industry-standard dimensions and tolerance class M, allowing compatibility with common indexable turning toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world-leading manufacturers of precision metalworking tools and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
SNMM120416-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the right balance between durable coating technology and robust geometry for dependable steel turning operations; the Tiger‑tec Gold grade WPP20G and the HU3 chipformer combine to extend edge life and stabilise chip formation. Order directly via Metav Werkzeuge or consult their technical team for application-specific recommendations. SNMM120416-HU3 WPP20G indexable turning insert by Walter Tools — Tiger‑tec Gold, for steel A SNMM120416-HU3 WPP20G indexable turning insert engineered for reliable steel turning, offering a coated carbide grade for consistent productivity in ISO P applications Tiger-tec Gold coated carbide grade Optimised HU3 chipformer for stable chips Square 90° form with 1.6 mm corner radius Designed for steel machining (ISO P) Consistent performance from a premium coated grade The combination of Tiger‑tec Gold coating and the WPP20G cutting grade delivers enhanced wear resistance and predictable edge life in steel turning. This coated carbide composition is formulated to resist the thermal and mechanical stresses typical of machining unalloyed and alloyed steels, which means fewer unscheduled insert changes and steadier cycle times. For operations where process reliability and repeatable surface quality matter, the graded coating helps to maintain cutting-edge stability over successive passes, supporting higher utilisation rates and improved overall equipment effectiveness. Geometry and chip control that improve productivity and surface finish A square 90° geometry with a 1.6 mm corner radius and a 0° (negative) rake angle provides a robust cutting edge suited to medium to demanding turning tasks. The HU3 chipbreaker is designed to promote stable chip formation and evacuation when machining steels, reducing the risk of chip entanglement and minimising secondary operations. The insert’s solid design supports consistent contact with the workpiece, which contributes to reproducible finish quality and reduced vibration. Where interrupted cuts or heavier engagement are expected, the negative rake and reinforced corner combine to enhance edge strength and resistance to chipping. Practical integration and reliable repeatability on the shop floor Manufactured to a tolerance class M, this insert integrates with standard toolholders for square‑insert turning applications and supports efficient tool change routines. The coated carbide construction ensures repeatable performance across batches, simplifying tooling management and inventory decisions. Backed by the reputation of Walter Tools, the insert is suitable for high-volume production as well as jobbing environments where consistent edge life and predictable part quality reduce rework and downtime. Technical cutting recommendations and compatibility data are available to support process planning and optimisation. Contact Metav Werkzeuge for cutting-data sheets, application advice and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMM120416-HU3-WPP20G-WALTER Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Product type: Indexable turning insert (square) Facts Corner radius: 1.6 mm Plate size: 12 Plate thickness: 04 Relief / rake: 0° (negative) Tolerance class: M Special features HU3 chipbreaker Square 90° plate form Coated carbide grade Suitable for steel machining (ISO P) FAQ Which materials is this insert suitable for? The SNMM120416-HU3 WPP20G insert is specified for steel machining (ISO P), covering unalloyed and alloyed steels according to the grade’s design. What is the benefit of the HU3 chipbreaker? The HU3 chipbreaker on this insert improves chip control and evacuation during steel turning, helping to maintain a stable cutting process and preventing chip-related interruptions. How does the 0° negative rake affect cutting behaviour? A 0° (negative) rake angle provides a sturdier cutting edge that helps resist chipping and deformation under heavy or interrupted cutting conditions; this contributes to longer edge life for the SNMM120416-HU3 insert. What does tolerance class M mean for tool setup? Tolerance class M indicates a middle‑range machining tolerance, offering reliable repeatability and consistent fit in toolholders for predictable production performance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SNMM150612-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and simple integration into standard toolholders for reliable turning in steel applications; order directly via Metav Werkzeuge or contact our consultants for specification support. SNMM150612-HU3 WPP20G indexable turning insert — Tiger·tec Gold coating, HU3 chipbreaker — Walter Tools SNMM150612-HU3 WPP20G is a square indexable insert for turning, engineered for efficient machining of steel with a Tiger·tec Gold coated carbide grade and a dedicated HU3 chipbreaker. Tiger·tec Gold coated carbide Optimised for steel machining HU3 chipbreaker for stable chips Square 90° form, 1.2 mm corner radius Efficient, repeatable performance for steel turning The combination of the Tiger·tec Gold coating and the grade WPP20G delivers a coated carbide surface engineered to withstand the thermal loads of steel machining. This results in extended tool life and consistent cutting behaviour even under varying cutting conditions. The insert’s composition is designed for balanced hardness and toughness, which reduces flank wear and helps to maintain dimensional accuracy in serial production. These technical choices translate into lower downtime and more predictable tool-change intervals. Stable chip control and improved process reliability Built with the HU3 chipbreaker, the geometry promotes stable chip formation across common turning operations in steel, reducing the risk of snarled or long chips. The negative relief — specified as a negative 0° relief angle — supports secure seating in robust toolholders and contributes to a solid cutting edge for interrupted cuts. Better chip control enhances operator safety and simplifies chip handling, which in turn supports higher metal removal rates without compromising surface quality. Simple integration and consistent workpiece quality The insert’s square 90° form with a 1.2 mm corner radius and size 15 profile ensures compatibility with common turning toolholders and provides a stable cutting corner for turning shoulders and face-off operations. The tolerance class M and thickness code 06 indicate consistent manufacturing precision for repeatable results in production. For tool selection, this means straightforward matching to holders specified for SNMM-style inserts and predictable behaviour during indexing, supporting efficient changeover and inventory management. For precision turning applications with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNMM150612-HU3-WPP20G-WALTER SKU: SNMM150612-HU3-WPP20G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Grade/series: WPP20G, Tiger·tec Gold Designation: SNMM150612-HU3 WPP20G Core data Corner radius: 1.2 mm Form/angle: Square 90° Size: 15 Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Materials & features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: HU3 Material application: Steel (P) as per ISO designation for steel machining Execution: M Series: Tiger-tec Gold FAQ What materials is this insert designed for? The SNMM150612-HU3 WPP20G insert and the Walter Tools grade WPP20G are optimised for steel (ISO group P), providing suitable heat resistance and chip control for unalloyed and alloyed steels. Which chipbreaker does the insert use and what is the benefit? The insert features the HU3 chipbreaker, which promotes short, controlled chips and improves machining reliability and surface finish in turning operations. How does the negative relief angle affect use? The negative 0° relief angle increases edge stability and is advantageous for heavier cuts or interrupted machining; it requires compatible toolholders that accept SNMM-form inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMM150612-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide and a HU5 chipbreaker for stable chip control and consistent performance when machining stainless steel; order directly via Metav Werkzeuge or ask the consultants for application advice. SNMM150612-HU5 WMP20G indexable turning insert (square 90°, r1.2) – Walter Tools The SNMM150612-HU5 WMP20G is a square 90° indexable turning insert engineered for medium to robust turning of stainless steel, offering a Tiger·tec Gold coated carbide grade and a HU5 chipbreaker for controlled cutting. Tiger·tec Gold coated carbide for stainless steel Square 90° insert with 1.2 mm corner radius HU5 chipbreaker for reliable chip control 0° negative rake for secure cutting action Consistent performance for stainless steel machining The combination of the Tiger·tec Gold coating with the WMP20G carbide grade produces a balance of wear resistance and thermal stability that benefits turning operations in stainless steel (ISO M). The coating technology reduces adhesive wear and supports a stable cutting edge under elevated temperatures and the tough, work-hardening tendencies typical of stainless steel. The HU5 chipbreaker is designed to shape and break chips reliably, lowering the risk of built-up edge and improving process security during medium to heavy cuts. By stabilising chip formation and protecting the edge, this configuration helps to extend tool life and reduce unscheduled tool changes, contributing to a smoother production flow and predictable cycle times. Geometry and robustness that protect productivity The square 90° geometry with a 1.2 mm corner radius delivers a robust cutting edge suited to heavier depth-of-cut work, while the 0° negative rake provides a secure cutting action that resists edge chipping in interrupted cuts. These geometric choices mean fewer insert indexing cycles and stronger resistance to mechanical shock. For operations where edge stability and repeatability matter, the insert’s design offers a pragmatic solution: larger corner radii distribute cutting forces, minimise local overheating and blunt wear, and permit higher metal removal rates without compromising dimensional stability. The insert thickness designation supports clamping stability in standard toolholders, further enhancing process reliability in production environments. Practical benefits in everyday production Incorporating this insert into a toolset translates into practical advantages: improved cycle consistency, lower tooling consumption per part, and reduced downtime for insert changes. The HU5 chip control, combined with the Tiger·tec Gold coating, supports continuous chips or segmented chips according to cutting data and material condition, which simplifies chip handling in automated cells. For shops aiming to balance productivity and reproducible surface finish on stainless steel components, this grade provides a clear efficiency argument: fewer rejects, longer intervals between tool interventions and stable surface quality under repeatable cutting conditions. For specific feeds and speeds, refer to machine and workpiece rigidity parameters; the insert’s properties allow conservative starting values to be increased safely once stability is proven. For tailored application support or to place an order for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — consultants are available to advise on cutting data and holder compatibility Technical data SKU: SNMM150612-HU5-WMP20G-WALTER Designation: SNMM150612-HU5 WMP20G Insert type: indexable turning insert Brand: Walter Tools Numbers / core data Insert size: 15 Thickness designation: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Special features Tiger·tec Gold coated carbide Grade: WMP20G Chipbreaker: HU5 Geometry: Square 90° Application: stainless steel (ISO M) FAQ Which materials is the SNMM150612-HU5 WMP20G best suited for? The SNMM150612-HU5 WMP20G indexable turning insert from Walter Tools is formulated for stainless steel (ISO M), where its coating and chipbreaker support secure chip formation and edge stability under the material’s tendency to work-harden. What is the function of the HU5 chipbreaker on this insert? The HU5 chipbreaker on the SNMM150612-HU5 WMP20G guides and fractures chips to reduce stringing and improve evacuation, which helps maintain consistent cutting conditions and protects the cutting edge during longer runs. How does the 1.2 mm corner radius influence cutting performance? A 1.2 mm corner radius increases edge strength and distributes cutting forces, making the insert better suited to medium and heavy cuts; it helps reduce chipping and extend insert life compared with smaller radii. Is this insert suitable for interrupted cuts or heavy roughing operations? Yes, the square 90° geometry combined with the 0° negative rake and the robust Tiger·tec Gold coated grade offers good resistance to impact and edge damage, making the insert appropriate for interrupted cuts and demanding roughing tasks. Protected trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for explanation only and does not imply any affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMM150612-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from stable edge life and reliable chip control with the Tiger‑tec Gold grade WPP20G; the HU5 chipbreaker and square 90° form deliver consistent results when machining Stahl. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored machining parameters. SNMM150612-HU5 WPP20G – Drehwendeschneidplatte (square 90°, HU5 chipbreaker) by Walter Tools, for Stahl The SNMM150612-HU5 WPP20G is a square, indexable turning insert designed for external turning of Stahl, combining a Tiger‑tec Gold coating with the HU5 chipbreaker to ensure stable chip formation and long tool life. Tiger‑tec Gold coated carbide WPP20G grade for Stahl machining Square 90° insert, 1.2 mm radius HU5 chipbreaker, negative 0° geometry High-efficiency turning performance for demanding Stahl applications The combination of the Tiger‑tec Gold coating and the WPP20G grade creates an insert optimised for the thermal and mechanical demands of turning Stahl. As an indexable insert with a robust coating system, it offers improved wear resistance and consistent cutting-edge stability under typical turning temperatures. This results in fewer tool changes, predictable tool behaviour and better process repeatability on medium to high feed operations. Reliable chip control and surface quality from optimised geometry Engineered with the HU5 chipbreaker and a square 90° plate form, the insert promotes controlled chip segmentation and evacuation. The negative 0° relief geometry supports secure cutting engagement and is well suited to finish and semi-finish passes where surface integrity matters. The 1.2 mm corner radius balances edge strength and achievable surface finish, reducing the risk of flank wear while maintaining dimensional stability. Practical benefits: productivity, repeatability and ease of selection The SNMM150612-HU5 WPP20G insert simplifies tool selection for steel turning thanks to the clear specification of grade and series. The coated carbide grade is designed for universal Stahl machining, offering a compromise between wear resistance and toughness to cope with varying cutting conditions. Clear designation and standard square format ease inventory management and enable swift index changes to maintain uptime on the shopfloor. For tailored application advice or to secure stock of Tiger‑tec Gold SNMM150612-HU5 WPP20G inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for rapid, practice-oriented guidance. Technical data SKU: SNMM150612-HU5-WPP20G-WALTER Designation: SNMM150612-HU5 WPP20G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core specifications Plate size: 15 mm Plate thickness: 06 Corner radius: 1.2 mm Plate form: Square 90° Relief angle: 0° (negative) Chipbreaker: HU5 Grade / sort: WPP20G Series: Tiger‑tec Gold Tolerance class: M Materials & features Material group: P (suitable for Stahl) Coating / technology: Tiger·tec Gold (coated carbide) Execution: M Indexable insert designation without grade: SNMM150612-HU5 Full ISO designation: SNMM150612-HU5 WPP20G FAQ What materials is this insert intended for? The SNMM150612-HU5 WPP20G is specified for machining Stahl and is formulated to handle the typical heat and chip-formation behaviour of steel turning. How does the HU5 chipbreaker affect performance? The HU5 chipbreaker on this indexable insert improves chip segmentation and evacuation, which supports steadier cutting conditions and helps maintain surface quality during turning operations. Is the Tiger‑tec Gold coating suitable for high-feed turning? Yes, the Tiger‑tec Gold coating on the WPP20G grade enhances wear resistance and edge stability, making the insert well suited to a range of feed rates in Stahl applications. Can this insert be used for finish passes and semi-finish passes? The combination of the square 90° form and a 1.2 mm corner radius provides a balance between edge strength and achievable surface finish, making it suitable for both finish and semi-finish turning in Stahl. Die geschützten Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMM150612-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Take advantage of the high thermal stability and robust edge control of this Tiger·tec Silver grade for consistent productivity and longer tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. SNMM150612-HU5 WSM30S indexable turning insert — Tiger·tec Silver for rostfreier Stahl and superalloys | Walter Tools The SNMM150612-HU5 WSM30S is a square indexable turning insert engineered for heavy-duty turning of rostfreier Stahl and heat-resistant superalloys, delivering reproducible edge stability under high thermal stress. Tiger·tec Silver coating for thermal stability Suitable for rostfreier Stahl and superalloys Square 90° form with 1.2 mm corner radius HU5 chipbreaker for reliable chip control Improved process reliability through advanced coating The combination of the Tiger·tec Silver coating and the WSM30S grade targets the main challenge in machining heat-resistant alloys and rostfreier Stahl: heat accumulation at the cutting edge. The multilayer coating increases thermal resistance and protects the carbide substrate, which results in longer tool life and more consistent cutting-edge behaviour. For production environments this means fewer unexpected tool changes, reduced scrap rates and enhanced repeatability when machining demanding batches. Robust geometry for stable cutting performance The insert’s square 90° shape and 1.2 mm corner radius create a durable cutting edge that tolerates higher feed rates and intermittent loads. With a 0° (negative) relief angle the design emphasises edge strength and secure clamping in toolholders, while the HU5 chipbreaker ensures controlled chip formation and evacuation. Together these features reduce vibration and the risk of built-up edge, supporting higher metal removal rates and more predictable surface finishes on workpieces. Application-focused advantages for workshops and job shops Designed for the material groups S and M, this insert is purpose-built for machining rostfreier Stahl and heat-resistant superalloys where conventional grades can fail. The WSM30S grade offers a balance of wear resistance and toughness so that process parameters can be stabilised quickly. For production planning this translates into shorter set-up times and a lower rate of rework. If further machining data or optimisation tips are required, technical assistance is available to determine cutting speeds and feeds tailored to individual machines and workpiece conditions. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools SNMM150612-HU5 WSM30S inserts via info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and rapid supply Technical Data Article number: SNMM150612-HU5-WSM30S-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Designation: SNMM150612-HU5 WSM30S Facts Size: 15 Thickness: 06 Corner radius: 1.2 Relief angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM30S (coated cemented carbide) Chipbreaker: HU5 Series: Tiger-tec Silver Execution/tolerance: M Material suitability: S / M Suitable for rostfreier Stahl (material group M) Suitable for heat-resistant superalloys and titanium (material group S) FAQ Which materials is this insert intended for? The SNMM150612-HU5 WSM30S insert is specified for machining rostfreier Stahl and heat-resistant superalloys; the WSM30S grade balances wear resistance and edge strength for these groups. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM30S grade increases thermal resistance and chip-edge protection, resulting in extended tool life and more consistent cutting performance. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of tangling and improving surface finish when using the SNMM150612-HU5 insert. Is the square 90° form recommended for heavy-duty turning? Yes, the square 90° geometry with a 1.2 mm corner radius provides a robust cutting edge suitable for heavier feeds and interrupted cuts while maintaining dimensional stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMM150616-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a wear‑resistant Tiger·tec Gold grade and a robust HU3 chipbreaker to boost process reliability and minimise tool changes. The square 90° geometry with a 1.6 mm corner radius ensures stable edges and consistent surface quality in steel turning. Purchase coordination and technical advice are available via Metav Werkzeuge for smooth integration into production. SNMM150616-HU3 WPP10G — Square 90° turning insert with Tiger·tec Gold coating (Walter Tools) A SNMM150616-HU3 WPP10G indexable insert for medium‑duty steel turning, designed to deliver consistent chip control and long tool life with Tiger·tec Gold technology Tiger·tec Gold coated WPP10G grade Optimised HU3 chipbreaker Square 90° geometry, 1.6 mm corner radius Designed for steel machining (ISO P) Consistent cutting performance and extended tool life The combination of Tiger·tec Gold coating and the WPP10G grade provides high wear resistance and reliable edge stability when machining steels. The coating system reduces abrasive and adhesive wear, which translates into fewer interruptions for insert changes and a steadier production rhythm. The HU3 chipbreaker is configured to control chip form typical for steel, improving evacuation and lowering the risk of built‑up edge; this means longer effective cutting times and more predictable tool life for process planning. Geometry that supports precision and repeatability The square 90° geometry with a 1.6 mm corner radius and a 0° (negative) relief angle offers a robust cutting edge suited to moderate depths of cut and versatile turning tasks. This geometry supports repeatable indexing and a stable clamping condition, reducing the number of tool changes and helping to maintain workpiece tolerances. The tolerance class M indicates manufacturing precision that assists in achieving consistent set‑up and predictable surface finish, especially in batch production where every index counts. Application focus and practical advantages in workshop use Engineered primarily for ISO P materials, this insert is optimised for machining a wide range of steels, from unalloyed to alloyed grades, where heat and chip formation require a balanced, wear‑resistant grade. The SNMM designation denotes the insert shape and size suitable for common square‑toolholder systems, while the plate size and thickness offer compatibility with standard toolholders used in general turning applications. For users looking to streamline operations, the insert’s combination of coating, chipbreaking and geometry delivers process security and straightforward handling during insert indexing. Contact Metav Werkzeuge for application‑specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange tailored supply or cutting‑data consultation Technical data SKU: SNMM150616-HU3-WPP10G-WALTER Label: Drehwendeschneidplatte SNMM150616-HU3 WPP10G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Measurements Corner radius: 1.6 mm Plate size: 15 mm Thickness designation: 06 Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: HU3 Geometry: Square 90° Application: Steel (ISO P) ISO designation: SNMM150616-HU3 WPP10G Execution: M FAQ What materials is this insert suited for? The SNMM150616-HU3 WPP10G insert is designed for ISO P materials and is optimised for machining a broad range of steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and edge stability for the insert, resulting in longer cutting life and more consistent process results. What is the role of the HU3 chipbreaker? The HU3 chipbreaker is configured to produce controlled chip forms when turning steel, aiding chip evacuation and reducing the chance of built‑up edge. How does the 90° square geometry affect use? Square 90° geometry provides a robust cutting edge and allows straightforward indexing; the 1.6 mm corner radius balances strength and surface finish for general turning tasks. Is this insert compatible with standard toolholders? The SNMM designation aligns with common square insert holders; compatibility should be verified with the toolholder specification but the geometry follows standard conventions. The Walter AG (brand presence: Walter Tools) is a globally recognised manufacturer of precision metal‑cutting tools and is part of the Sandvik Group. Protected trademarks and trade names mentioned are the property of their respective owners. The mention of brand names and trademarks serves explanatory purposes only and does not indicate any affiliation or endorsement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com