SNMM190624-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
High productivity and consistent surface finish in steel turning are delivered by the combination of the Tiger·tec Gold WPP20G coating and the HU5 chipbreaker, together with a robust square 90° geometry and a 2.4 mm nose radius; these characteristics support stable, repeatable machining in production environments. Order the SNMM190624-HU5 WPP20G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNMM190624-HU5 WPP20G indexable turning insert — Tiger·tec Gold, for steel | Walter Tools SNMM190624-HU5 WPP20G is an indexable turning insert engineered for efficient steel machining, combining a coated carbide grade from the Tiger·tec Gold family with a square 90° form and an HU5 chipbreaker for controlled chip formation. Tiger·tec Gold coated carbide grade WPP20G Square 90° geometry with 2.4 mm nose radius Optimised HU5 chipbreaker for steel machining Maximise throughput and tool life in steel turning The Tiger·tec Gold WPP20G grade is a coated carbide designed for the thermal and mechanical demands of steel machining. Its coating improves wear resistance and maintains a stable cutting edge under increased cutting temperatures, which translates directly into longer tool life and fewer insert changes. The square 90° geometry offers a rigid cutting line and uniform load distribution, supporting steady material removal rates and consistent surface finish. For production planners this means reduced downtime and improved process economy when turning unalloyed and alloy steels. Controlled chips and predictable machining performance Chip formation is central to safe, efficient turning. The HU5 chipbreaker is optimised for steel applications and promotes short, manageable chips at typical turning conditions, reducing the risk of chip entanglement and tool damage. The negative rake configuration (0°) and a 2.4 mm corner radius combine to create a robust cutting edge that tolerates interrupted cuts and varying depths of cut. These features yield predictable performance across common steel grades and allow process engineers to set stable feeds and speeds with confidence. Practical compatibility and handling in workshop routines The insert's standard dimensions and square shape make it suitable for a wide range of toolholders and turning operations where a 90° approach is required. The coated Tiger·tec Gold substrate suits continuous and semi-continuous turning, offering a balance between wear resistance and toughness that is particularly effective on steels. For application advice, recommended clamping and grade selection, Metav Werkzeuge provides technical guidance and cutting data to support integration into existing machining programmes. Contact Metav Werkzeuge for tailored application advice and to request Walter Tools Tiger‑tec Gold SNMM190624-HU5 WPP20G inserts for productive steel turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SNMM190624-HU5-WPP20G-WALTER Designation: SNMM190624-HU5 WPP20G Product type: indexable turning insert Facts Geometry: Quadrate 90° Corner radius: 2,4 Clearance / rake: 0° (negativ) Chipbreaker: HU5 Size: 19 Thickness: 06 Grade / series: Tiger-tec Gold / WPP20G Execution / tolerance: M Special features Coating: Tiger·tec Gold (coated carbide) Material application: P (steel) Suitable for: steel machining Brand: Walter Tools FAQ What materials is this insert intended for? The SNMM190624-HU5 WPP20G insert is specified for steel machining (material group P) and the WPP20G grade is optimised for typical thermal and chip-formation behaviour encountered when turning steel. How does the HU5 chipbreaker support production stability? The HU5 chipbreaker on this Walter Tools insert promotes short, controllable chips and reduces the risk of chip-related interruptions, which helps maintain steady cycle times and decreases the likelihood of tool or workpiece damage. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coated carbide grade enhances wear resistance and heat tolerance, resulting in improved cutting-edge retention and extended insert life under demanding steel turning conditions. Is the 0° negative clearance suitable for interrupted cuts? Yes; the 0° negative rake together with the square geometry and 2.4 mm nose radius form a robust cutting edge that is well suited to interrupted or variable cutting conditions when turning steel. Can this insert be used with standard square toolholders? The square 90° geometry is compatible with common toolholders that accept SNMM-style inserts; verify holder seat and clamping compatibility before assembly. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter AG (marketed as Walter Tools) is referenced for explanatory purposes only. There is no connection between our company and the mentioned brands beyond the sale of original, factory-new products of the stated manufacturer.
SNMM190624-HU7 WPP10G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating for extended tool life, the HU7 chipbreaker for reliable chip control, and the square 90° geometry for robust turning performance — order directly via Metav Werkzeuge or consult our technical advisors for application support. SNMM190624-HU7 WPP10G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools The SNMM190624-HU7 WPP10G is a square 90° indexable turning insert designed for steel machining, combining a coated carbide grade with a negative 0° geometry for consistent cutting performance. Tiger·tec Gold coated grade for wear resistance Optimised HU7 chipbreaker for stable chips Square 90° insert, 19 mm size Corner radius 2.4 mm for secure engagement Increased productivity through a high-performance grade The coated Tiger·tec Gold grade WPP10G delivers measurable improvements in tool life and process stability when machining steel. The grade is a coated carbide formulation tailored to the thermal and mechanical loads typical in steel turning; this reduces flank wear and extends cutting intervals, which supports higher production uptime and lower tooling consumption. By choosing a wear-resistant grade, machining cycles become more predictable and the need for frequent insert changes is reduced, enhancing overall line efficiency. Reliable chip control and consistent surface quality The dedicated HU7 chipbreaker, combined with the 0° (negative) rake geometry, produces short, controllable chips and reduces the risk of built-up edge formation. This configuration promotes steady cutting forces during interrupted and continuous cuts alike, improving repeatability and surface finish. The 2.4 mm corner radius stabilises the cutting edge at moderate depths of cut, helping to maintain dimensional accuracy while limiting chatter and vibration in demanding turning operations. Easy integration and secure seating for stable process results The Square 90° format and 19 mm size offer broad compatibility with standard turning holders, while the tolerance class M ensures consistent seating and interchangeability in multi-tool setups. The insert thickness designation 06 and the SNMM form factor provide a compact yet robust cutting geometry suitable for a wide range of steel turning tasks. Together these characteristics simplify tool inventory management and reduce setup time, enabling efficient deployment across production cells. For reliable steel turning with Walter Tools’ Tiger·tec Gold WPP10G grade, contact Metav Werkzeuge for application advice or to request availability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNMM190624-HU7-WPP10G-WALTER Designation: SNMM190624-HU7 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: HU7 Facts Insert size: 19 mm Corner radius: 2.4 mm Free angle: 0° (negative) Shape: Square 90° Thickness: 06 Tolerance class: M Special features Coated carbide grade (Tiger·tec Gold) Optimised for steel machining (P group) Designed for stable chip control Robust edge for productive turning SNMM insert geometry for standard toolholders FAQ Which materials is this insert intended for? The SNMM190624-HU7 WPP10G insert is optimised for steel (ISO group P); the Tiger·tec Gold grade is developed for the thermal and chip-formation characteristics of unalloyed and alloyed steels. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on the SNMM190624-HU7 WPP10G promotes short, predictable chips and steadier cutting forces, which improves surface finish and reduces interruptions from long or tangled chips. What benefits does the negative 0° geometry provide? A 0° (negative) rake offers greater edge strength and resistance to fracture under heavy or interrupted cuts, supporting reliable performance when turning tougher steel grades. Is the insert compatible with standard toolholders? Yes — the square 90° SNMM form with 19 mm size and tolerance class M fits conventional turning toolholders that accept this geometry, allowing straightforward integration into existing tooling systems. Why choose the Tiger·tec Gold grade? Tiger·tec Gold WPP10G combines a robust coating and substrate balance to extend tool life and maintain cutting-edge stability in steel turning, reducing downtime for insert changes and improving process economics. Walter Tools is part of the Walter AG group, a worldwide supplier of precision metalworking tools. Protected trademarks and product names belong to their respective owners. Mention of brand names is for explanatory purposes only; no affiliation with Metav Werkzeuge is implied. The offered article is an original, factory-new product of the manufacturer.
SNMM190624-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the HU7 chipbreaker for reliable chip control and extended tool life; the square 90° form with a 2.4 mm corner radius ensures robust engagement in turning operations. Order the SNMM190624-HU7 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. SNMM190624-HU7 WPP20G — indexable turning insert, Tiger·tec Gold, for steel (ISO P) — Walter Tools SNMM190624-HU7 WPP20G is a square 90° indexable turning insert designed for steel turning applications; it combines a Tiger·tec Gold cutting grade with an HU7 chipbreaker to balance wear resistance and consistent chip formation Tiger·tec Gold coating for long tool life Optimised chipbreaker HU7 for stable chips Square 90° form for robust turning 2.4 mm corner radius for consistent edge strength Boosted lifetime and consistent performance for steel turning The combination of the Tiger·tec Gold technology and the WPP20G grade delivers a coated carbide chemistry aimed at extending cutting edge life while maintaining process stability. This grade is optimised for ISO P workpiece groups, in other words machining steel, where heat and chip formation demand a balanced coating and substrate. The protective coating reduces flank wear and increases resistance to abrasive and adhesive mechanisms, so tooling intervals are extended and machine uptime improves. The SNMM190624-HU7 WPP20G insert offers an economical balance between durability and versatility for general steel turning. Predictable chip control and secure cutting geometry The insert’s HU7 chipbreaker is designed for controlled chip formation under typical turning feeds and depths, reducing the risk of long stringy chips and improving surface finish. The square 90° plate form together with the 2.4 mm corner radius gives a strong cutting edge that tolerates intermittent cuts and slight engagement variations, while the 0° (negative) relief angle promotes stable cutting forces in heavier cuts. Tolerance class M supports consistent mounting and repeatable results across index changes. These features translate into fewer tool changes and better process repeatability on the shop floor. Practical handling and integration in production With a plate size of 19 mm and thickness designation 06, the insert fits standard clamping systems for this series and is suitable for a wide range of turning fixtures used in industrial workshops. The square geometry enables economical indexability — four usable cutting corners — which increases the effective tool life per insert and reduces tooling costs per part. The coated carbide construction of the grade supports general-purpose use in steel, helping to simplify tooling lists and inventory for production environments that prioritise both performance and cost-effectiveness. Contact Metav Werkzeuge for tailored cutting data, stock availability and application advice on the Walter Tools SNMM190624-HU7 WPP20G; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into the production process Technical data SKU: SNMM190624-HU7-WPP20G-WALTER Article label: Drehwendeschneidplatte SNMM190624-HU7 WPP20G Manufacturer: Walter Tools Core data Plate size: 19 Corner radius: 2.4 Form: Square 90° Relief angle: 0° (negative) Thickness: 06 Tolerance class: M Designs & special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: HU7 Base designation: SNMM190624-HU7 Applicable workpiece group: P (steel) FAQ What materials is this insert suited for? The SNMM190624-HU7 WPP20G indexable turning insert by Walter Tools is designed primarily for ISO P applications, meaning it is optimised for machining various types of steel. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on the SNMM190624-HU7 WPP20G promotes stable chip formation and easier chip evacuation, which contributes to improved surface quality and more consistent cycle times in turning operations. What does the 2.4 mm corner radius mean for my parts? A 2.4 mm corner radius increases edge strength and reduces the likelihood of chipping during interrupted cuts, helping to maintain dimensional stability and extend the usable life of the insert. Is the insert suitable for heavy cuts or intermittent cutting? The square 90° geometry and negative 0° relief make the SNMM190624-HU7 WPP20G well suited to robust engagement and intermittent cutting typical in many turning applications. How many cutting edges are available per insert? The square form provides four indexable corners per insert, offering efficient use of the insert and a favourable cost-per-edge ratio. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNMM190624-HU7 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WPP30G grade and the precise square 90° geometry for productive, repeatable turning of Stahl. Order the insert directly via Metav Werkzeuge or consult our advisers for process-matched recommendations. SNMM190624-HU7 WPP30G — indexable turning insert, Tiger·tec Gold, for Stahl (Walter Tools) The SNMM190624-HU7 WPP30G is a square 90° indexable turning insert with a HU7 chipbreaker, designed for general turning of Stahl where consistent chip control and long tool life are required. Tiger·tec Gold coating for improved wear resistance Grade WPP30G for productive Stahl machining Square 90° geometry, 2.4 mm corner radius HU7 chipbreaker for reliable chip control Consistent performance for productive turning The combination of the WPP30G grade and the Tiger·tec Gold coating delivers a stable cutting edge and predictable wear behaviour, which helps maintain component tolerances over long production runs. The square 90° form with a 2.4 mm corner radius provides favourable cutting engagement for typical facing and light to medium turning operations on Stahl. This means fewer insert changes and a reduced risk of unexpected downtime, supporting higher overall process efficiency. Precise chip control and surface quality Equipped with the HU7 chipbreaker and a 0° (negative) free cutting angle, this indexable insert promotes controlled chip formation and evacuation in a wide range of turning conditions. Controlled chips reduce surface defects and improve operator safety in automated and manual lathes alike. The predictable chip flow also simplifies coolant and clamping decisions, resulting in more consistent surface finish and less rework. Robust grade and coating for extended tool life The coated carbide construction, part of the Tiger·tec Gold series, is engineered for a balance between wear resistance and toughness. The grade is optimised for the thermal and mechanical demands of machining Stahl, offering a compromise between longevity and resistance to chipping. This translates into longer effective tool life and lower per-part tooling cost in production environments where repeatability matters. Application guidance and process reliability The insert is suitable for a broad range of Stahl machining tasks, from general turning to semi-finish passes. Its square form and chipbreaker make it versatile for both batch production and mixed operation shops. When combined with a stable toolholder and correct cutting data, the insert supports predictable cycle times and repeatable dimensional control — key factors for quality-led manufacturing. For process-focused turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMM190624-HU7-WPP30G-WALTER Designation: SNMM190624-HU7 WPP30G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Execution: M Material group: P Facts Size: 19 mm Plate form: Square 90° Corner radius: 2.4 mm Free cutting angle: 0° (negative) Thickness: 06 Chipbreaker: HU7 Tolerance class: M Special features Coated carbide (Tiger·tec Gold) Suited for Stahl machining (ISO group P) Square 90° geometry for versatile turning HU7 chipbreaker for controlled chip formation Robust grade for stable cutting edge performance FAQ What materials is this insert designed for? The SNMM190624-HU7 WPP30G insert (Walter Tools) is designed primarily for machining materials in ISO group P, i.e. various types of Stahl. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this insert increases wear resistance and heat tolerance, which supports longer tool life and more stable machining when turning Stahl. Which chip conditions are supported by the HU7 chipbreaker? The HU7 chipbreaker promotes consistent chip segmentation and evacuation for common turning operations, reducing risk of long, stringy chips and improving surface consistency. Is the square 90° geometry suitable for finishing passes? Yes, the square 90° form with a 2.4 mm corner radius provides versatility for both semi-finish and general turning, offering good support for dimensional control. Can this insert be used in automated production? The insert’s combination of grade, coating and chip control is suitable for automated turning centres where repeatability and predictable wear are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNMM250716-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WPP20G grade for consistent performance when machining steel; the square 90° form with a 1.6 mm corner radius provides robust edge strength and repeatable results. Order the SNMM250716-HU7 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. SNMM250716-HU7 WPP20G square indexable turning insert, Tiger·tec Gold, for steel — Walter Tools The SNMM250716-HU7 WPP20G is a square 90° indexable turning insert with Tiger·tec Gold coating, designed for reliable steel machining and equipped with a HU7 chipbreaker for controlled chip formation Tiger·tec Gold coating for long tool life Grade WPP20G optimised for steel Square 90° form for robust corner strength Chipbreaker HU7 for controlled chips Maximise machining reliability and tool life The coated carbide in the WPP20G grade combines a hard wear-resistant surface with a resilient substrate, delivering a balance between edge stability and longevity. The Tiger·tec Gold technology reduces flank and crater wear under typical steel cutting conditions, which results in fewer insert changes and more predictable tool life. This contributes to a steadier production output and reduced process interruptions, especially in medium to heavy turning operations. Secure chip control and steady process behaviour Integrated HU7 chip control promotes reliable chip segmentation and evacuation, helping to avoid snarled chips and secondary operations. The insert’s square 90° geometry and 0° (negative) rake angle enhance edge strength, making it suited to interrupted cuts and applications where corner robustness is essential. As a result, cycle times become more consistent and rework is reduced through improved surface integrity. Optimised for steel turning with clear application focus Specified for ISO group P (steel), the grade and geometry are tuned to handle the typical heat generation and chip characteristics of unalloyed and alloyed steels. The combination of WPP20G and the insert’s form supports reliable performance across a broad range of turning tasks, from roughing to medium finishing, without overcomplicating process setup. This makes the insert a practical choice where flexibility and repeatable results are required. Easy specification, fewer uncertainties in production With defined parameters—25 mm size, 1.6 mm corner radius and thickness code 07—the insert integrates simply into existing toolholders and tool lists. The tolerance class M and execution M ensure consistent interchangeability and placement accuracy, which assists toolroom planning and reduces setup time. For production planners seeking predictable performance and documented data for process sheets, the insert is straightforward to specify. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting data or to secure the Walter Tools SNMM250716-HU7 WPP20G for production Technical Data SKU: SNMM250716-HU7-WPP20G-WALTER Designation: SNMM250716-HU7 WPP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Insert size: 25 mm Rake angle: 0° (negative) Corner angle: 90° Thickness code: 07 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU7 Material applicability: P (steel) Execution: M FAQ What materials is this insert best suited for? The SNMM250716-HU7 WPP20G is optimised for ISO group P materials, meaning it is primarily designed for turning steel including unalloyed and alloyed varieties. How does the Tiger·tec Gold technology benefit production? Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, which leads to longer insert life, fewer tool changes and more consistent batch quality. When is the HU7 chipbreaker recommended? The HU7 chipbreaker is appropriate for operations that require controlled chip segmentation and reliable evacuation, especially in medium to heavy turning where chip control impacts cycle times. Is the square 90° form suitable for interrupted cuts? Yes. The square 90° geometry combined with a 0° negative rake and a 1.6 mm corner radius provides robust edge strength, making the insert well suited to interrupted and heavy engagement cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between our company and the respective trademark holders. The offered article is an original, factory-new product of the manufacturer.
SNMM250724-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and precise geometry for consistent turning results; order directly via Metav Werkzeuge or request advice from our consultants. SNMM250724-HU3 WPP20G turning insert — square 90°, Tiger·tec Gold grade — Walter Tools The SNMM250724-HU3 WPP20G is a square turning insert designed for efficient machining of Stahl components in general turning applications. Tiger·tec Gold coating for high wear resistance WPP20G grade optimised for Stahl machining Square 90° geometry with 2.4 mm corner radius HU3 chipbreaker for stable chip formation Boosted process stability and longer cutting life The combination of the Tiger·tec Gold coating and the WPP20G grade provides measurable improvements in cutting-edge durability and wear resistance. Coated carbide technology reduces flank and crater wear under typical turning conditions, which translates into longer tool life and fewer insert changes per production shift. The HU3 chipbreaker stabilises chip formation, reducing the risk of built-up edge and improving cycle-time predictability in continuous and semi-continuous operations. These technical choices support a steady production flow and lower per-part tooling costs. Reliable geometry for consistent component quality A square 90° insert form with a 2.4 mm corner radius offers a balance between strength and surface finish. The negative 0° free angle increases insert rigidity and is particularly effective when machining interrupted cuts or when higher radial forces occur. The insert thickness (code 07) and the 25 mm seat size ensure robust clamping and repeatable runout performance. Together, these features contribute to stable machining conditions and a consistent surface quality on turned parts made from Stahl. Broad applicability and clear material focus This insert is specified for the machining of Stahl (ISO group P) and is aimed at versatile general-purpose turning tasks across varied alloy ranges. The WPP20G sort is positioned as a universal, wear-resistant option within the Tiger·tec Gold family, suitable for many common steels where a balance of durability and toughness is required. For engineers seeking an insert that reduces setup complexity while maintaining dependable tool life, the combination of grade, chipbreaker and insert geometry delivers a pragmatic solution. Contact Metav Werkzeuge today to discuss the SNMM250724-HU3 WPP20G by Walter Tools and find the best cutting strategy for your application — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMM250724-HU3-WPP20G-WALTER Article designation: SNMM250724-HU3 ISO designation: SNMM250724-HU3 WPP20G Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Series: Tiger·tec Gold Core dimensions Insert size: 25 mm Corner radius: 2.4 mm Thickness: 7 mm Free angle: 0° (negativ) Plate shape: Square 90° Features & materials Grade: WPP20G (coated carbide) Chipbreaker: HU3 Tolerance class: M Execution: M Material applicability: Stahl Series description: Tiger·tec Gold FAQ Which materials is this insert suitable for? The SNMM250724-HU3 WPP20G is specified for the machining of Stahl (ISO group P), making it suitable for a wide range of unalloyed and alloyed steels. What advantage does the Tiger·tec Gold series offer? Tiger·tec Gold enhances wear resistance and cutting-edge stability; the WPP20G grade within this series balances durability and toughness for general turning tasks. How does the HU3 chipbreaker influence machining? The HU3 chipbreaker on the SNMM250724-HU3 promotes controlled chip formation and evacuation, reducing the likelihood of built-up edge and improving process reliability. Is the geometry suitable for heavy interrupted cuts? Yes — the square 90° shape combined with a negative 0° free angle and a 2.4 mm corner radius increases insert rigidity, which supports interrupted and demanding turning operations. What tolerance class and execution does the insert have? The insert is manufactured to tolerance class M with execution code M, ensuring consistent fit and repeatable seating in standard toolholders. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
SNMM250724-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and compatibility with ISO P steels for consistent production results; order directly via Metav Werkzeuge or request an application consultation from the Metav team. SNMM250724-HU7 WPP20G — Indexable turning insert, HU7 chipbreaker, 0° negative rake (Walter Tools) The SNMM250724-HU7 WPP20G is a square 90° indexable insert designed for productive turning of steel under ISO P conditions, combining Tiger‑tec Gold coating with a robust chipbreaker for repeatable performance. Tiger‑tec Gold coating for extended tool life Square 90° geometry with 2.4 mm corner radius HU7 chipbreaker for reliable chip control Designed for machining steel (ISO P) Productive metal removal with optimised wear resistance The combination of Tiger‑tec Gold coating and the WPP20G grade delivers a balance of wear resistance and toughness tailored to steel machining. The coated cemented carbide substrate is engineered to resist adhesive and abrasive wear typical of ISO P operations, which helps to maintain cutting-edge stability over longer tool life. This results in fewer indexings and reduced process interruptions, supporting higher uptime and a better cost per component in series production. Predictable chip formation and machining security The HU7 chipbreaker is designed for controlled chip formation when turning steels, producing short, manageable chips across common cutting conditions. Together with the 0° negative rake, the insert provides stable cutting forces and improved edge security during interrupted cuts or hard spots, reducing the risk of built-up edge and unexpected rework. These features benefit workshops seeking consistent surface finish and repeatable cycle times. Geometry focused on versatility and accuracy The square 90° shape with a 2.4 mm corner radius gives robustness where strength is needed while allowing effective finishing capability on external contours. The insert size of 25 mm and a nominal thickness of 7 mm provide a rigid cutting edge for medium to heavy roughing and finishing passes. The tolerance class M supports close repeatability between indexings, simplifying tool change planning and clamping accuracy in production tooling systems. Efficient integration into production workflows Suppliers and production engineers will appreciate the clear specification and compatibility with standard ISO tooling systems. The insert’s grade and chipbreaker are configured specifically for steel (ISO P) applications, enabling straightforward selection for many common turning tasks. With a focus on stable chip control and longer edge life, the component supports higher process reliability and reduced tooling logistics for batch and continuous manufacturing. For application advice or to secure supply of the SNMM250724‑HU7 WPP20G, contact Metav Werkzeuge for tailored recommendations and fast order processing: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: SNMM250724-HU7-WPP20G-WALTER Designation: SNMM250724-HU7 WPP20G Brand: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Gold Facts Corner radius: 2.4 mm Plate size: 25 mm Plate thickness: 7 mm Free cutting angle: 0° (negative) Tolerance class: M Special features Chipbreaker: HU7 Grade: WPP20G Coating technology: Tiger‑tec Gold Plate form: Square 90° Material application: Steel (ISO P) FAQ Which materials is this insert intended for? The SNMM250724‑HU7 WPP20G is developed for machining steel (ISO P) and is optimised for the heat and chip characteristics typical of these materials. What advantage does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP20G grade improves wear resistance and edge stability, helping the SNMM250724‑HU7 to deliver longer tool life and more consistent component quality. How does the HU7 chipbreaker influence chip control? The HU7 chipbreaker on this insert produces short, controllable chips under a wide range of cutting conditions, which reduces handling risk and supports uninterrupted production cycles. Is the 2.4 mm corner radius suitable for finishing passes? A 2.4 mm corner radius offers a compromise between strength and surface finish, allowing the insert to be used for robust finishing as well as semi‑finishing in many turning operations. What does tolerance class M mean for set‑up accuracy? Tolerance class M indicates a medium level of dimensional repeatability, simplifying toolholder set‑up and ensuring predictable indexing behaviour for production tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used here for explanation only and do not imply any affiliation with or endorsement by those trademark holders. The offered item is an original, factory‑new article of the specified manufacturer.
SNMM250724-HU7 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP30G wear‑resistant grade and the HU7 chipbreaker to achieve reliable and productive machining of steel; order the SNMM250724‑HU7 WPP30G indexable insert directly via Metav Werkzeuge or consult our technical advisers for application guidance. SNMM250724-HU7 WPP30G — Square 90° indexable turning insert, Tiger·tec Gold, for steel (Walter Tools) The SNMM250724-HU7 WPP30G is a square 90° indexable insert engineered for turning operations in steel, combining a Tiger·tec Gold coated carbide grade with a robust HU7 chipbreaker and a 2.4 mm corner radius for stable cutting performance. Tiger·tec Gold coated carbide grade WPP30G Optimised HU7 chipbreaker for steel Square 90° geometry, 2.4 mm corner radius Negative 0° relief for robust cutting Consistent chip control for efficient steel turning The combination of the WPP30G grade and the HU7 chipbreaker delivers consistent chip formation and evacuation when machining ISO P materials (steel). The coated carbide is formulated to withstand the typical heat and abrasion of steel turning, which reduces unplanned tool changes and supports predictable cycle times. For users unfamiliar with chipbreaker types: the HU7 geometry moderates chip curl and length, lowering the risk of entanglement and improving surface integrity. The result is a measurable increase in process reliability and repeatability for production runs. Robust geometry that supports heavy cutting and life expectancy The square 90° insert form with a 2.4 mm corner radius and negative 0° relief provides a stable cutting edge ideal for medium to heavy turning conditions. The geometry spreads cutting forces across the corner radius, reducing edge chipping and supporting longer tool life compared with sharper radii under similar cutting data. This design is particularly effective for operations that require secure clamping and a predictable cutting response, helping to maintain part tolerances and reduce scrap rates. In short, the insert geometry contributes directly to throughput and quality. Tiger·tec Gold coating and grade advantages The Tiger·tec Gold coating paired with the WPP30G substrate is optimised for steel applications, offering a balance between wear resistance and toughness. The coating reduces flank and crater wear, while the substrate maintains edge stability under thermal load. For machinists and process planners, this translates into fewer interruptions, longer tool cycles and a lower cost per component over time. The insert is a practical choice where a combination of surface finish, dimensional control and economical running costs is required. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts or to request suitability checks for specific steel grades; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SNMM250724‑HU7‑WPP30G‑WALTER Designation: SNMM250724‑HU7 WPP30G Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Gold Grade: WPP30G Manufacturer: Walter Tools Facts Plate geometry: Square 90° Corner radius: 2.4 mm Plate size: 25 mm Thickness: 07 Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: HU7 Coating: Tiger·tec Gold (coated carbide) Application group: Steel (ISO P) Execution/class: M Substrate type: Coated carbide FAQ What materials is this insert intended for? The SNMM250724‑HU7 WPP30G is designed primarily for steel machining (ISO P); the WPP30G grade and Tiger·tec Gold coating address the heat and wear behaviour typical of steel turning. How does the HU7 chipbreaker affect performance? The HU7 chipbreaker produces controlled chip forms suitable for most steel turning tasks, improving chip evacuation and reducing the chance of chip entanglement during operation of the SNMM250724‑HU7 WPP30G insert. Can this insert be used for finishing passes? Yes, the combination of a 2.4 mm corner radius and the coated grade provides a compromise between edge strength and surface finish, making the insert suitable for both medium finishing and roughing where robust performance is required. Is the SNMM250724‑HU7 WPP30G compatible with heavy‑duty cutting? The square 90° geometry and negative 0° relief enhance edge stability under load, supporting heavier cutting conditions while maintaining dimensional control. What are the key benefits of the Tiger·tec Gold coating on this grade? Tiger·tec Gold lowers flank and crater wear, increases process security and contributes to a longer effective tool life for steel applications, resulting in reduced tool changes and improved productivity. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered product designations are cited for clarification only and do not imply any affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
SNMM250916-HU3 WPP20G HU3 Wendeplatten - Walter Tools
Benefit from a combination of high process security and versatile performance: the Tiger·tec Gold WPP20G grade delivers robust edge life and reliable chip control for steel machining, while the HU3 chipbreaker and 0° negative rake ensure stability in demanding turning operations. Order directly via Metav Werkzeuge or consult our specialists for application advice. SNMM250916-HU3 WPP20G indexable turning insert — Tiger·tec Gold coating, 0° negative rake, 1.6 mm corner radius | Walter Tools A SNMM250916-HU3 WPP20G indexable turning insert engineered for steel (ISO P) applications, offering a coated carbide grade that balances wear resistance and toughness for productive turning operations. Tiger·tec Gold coated grade WPP20G Suitable for steel (ISO P) machining 0° negative rake for robust cutting 1.6 mm corner radius for consistent chip control Consistent performance from a modern coated grade The Tiger·tec Gold WPP20G grade combines a hard, wear-resistant outer coating with a tough carbide substrate to deliver predictable tool life and stable chip formation when machining steels. This coated carbide formulation is optimised to resist flank and crater wear under typical heat and pressure conditions encountered in turning; the result is improved process reliability and fewer unscheduled tool changes. The specification is targeted at general-purpose steel machining, offering an appropriate compromise between economy and performance. Reliable edge integrity and chip control for turning With the HU3 chipbreaker and a 1.6 mm corner radius, the insert provides controlled chip segmentation and a dependable cutting edge for a range of feed rates. The 0° negative rake creates a robust cutting geometry that reduces the risk of edge chipping in interrupted cuts and heavy-duty operations. These features translate into longer intervals between indexings and a steadier surface finish on the workpiece, supporting higher effective productivity on lathe centres. Designed for process security and repeatability The square 90° form and tolerance class M ensure consistent seating and repeatable orientation in rigid toolholders, supporting stable machining parameters and reduced set-up variance. Built for steel (ISO P) materials, the insert helps maintain cycle-time consistency and lowers the risk of unexpected tool failures. Where predictable output and low variance matter, this configuration supports tighter production control and easier process validation. Practical application advice and support For general turning of unalloyed and alloyed steels, select the WPP20G grade combined with appropriate cutting data for the workpiece hardness and machine rigidity. The insert’s balance of wear resistance and toughness makes it suitable for mixed-production environments where varied steel grades are processed. If clarification is required on optimal feeds, speeds or holder selection, Metav Werkzeuge’s consultants are available to advise on application-specific settings and compatible tooling combinations. Contact Metav Werkzeuge today to discuss how the Tiger·tec Gold WPP20G inserts can improve machining stability and throughput; our specialists will recommend the best toolholder and cutting data for the task. Technical data SKU: SNMM250916-HU3-WPP20G-WALTER Designation: SNMM250916-HU3 WPP20G Manufacturer: Walter Tools Grade: WPP20G Series: Tiger·tec Gold Core dimensions Corner radius: 1.6 mm Insert size: 25 mm Relief angle: 0° (negative) Corner angle: 90° Special features Coated carbide grade Tiger·tec Gold Chipbreaker: HU3 Shape: square 90° Tolerance class: M Application: steel (ISO P) Execution: M FAQ What materials is this insert intended for? This insert is specified for steel (ISO P) machining; the WPP20G grade is optimised for unalloyed and alloyed steels. How does the HU3 chipbreaker improve turning operations? The HU3 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of chip-related interruptions during turning with this Walter Tools insert. What benefit does the 0° negative rake provide? A 0° negative rake offers a strong cutting edge that is more resistant to chipping under heavy or interrupted cuts, enhancing edge security and tool life for demanding turning tasks. Is the insert suitable for interrupted cuts? Yes; the combination of a robust rake geometry and the coated carbide grade helps resist impact and wear that can occur during interrupted cutting. How does the 1.6 mm corner radius affect surface finish? A 1.6 mm corner radius balances edge strength with the ability to produce a consistent surface finish, making it a practical choice for general-purpose turning on steel. Can this insert be used in high-volume production? The Tiger·tec Gold coating and the WPP20G grade are designed to provide process stability and repeatable tool life, supporting continuous production where steel components are machined. Does the square 90° form influence clamping and orientation? The square 90° geometry ensures stable seating in compatible toolholders and predictable orientation, which aids repeatability and reduces set-up variance. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SNMM250924-HU3 WPP20G Wendeplatten - Walter Tools
Take advantage of a proven turning solution that combines the Tiger·tec Gold coating and the WPP20G grade for reliable, economy-minded steel machining; the robust HU3 chipbreaker and square 90° geometry with a 2.4 mm corner radius keep productivity high and tool life consistent. Order directly via Metav Werkzeuge or consult our specialists for application advice. SNMM250924-HU3 WPP20G turning insert by Walter Tools — Tiger·tec Gold, for steel (P) SNMM250924-HU3 WPP20G is a square turning indexable insert engineered for steel machining, combining a Tiger·tec Gold coated carbide grade with an HU3 chipbreaker for stable chip control in continuous and interrupted turning Tiger·tec Gold coating for high productivity Optimised for steel (P) applications Square 90° geometry with 2.4 mm corner radius HU3 chipbreaker for consistent chip control 0° negative rake for secure cutting edges Increased productivity through consistent edge performance The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balance of wear resistance and toughness that benefits series production. The advanced coating reduces flank wear and thermal degradation, which in turn helps to extend the effective life of the cutting edge and reduces tool-change frequency. For operations where cycle time and repeatability matter, this insert contributes to a smoother production flow and predictable tool costs while maintaining surface quality on steels classified under group P Reliable chip control and process stability Equipped with the HU3 chipbreaker, the insert promotes short, manageable chips in a wide range of cutting conditions. The square 90° form and 2.4 mm corner radius provide strong edge support, especially useful in heavier cuts and mixed turning operations. These geometric choices increase process security by reducing the risk of edge chipping and ensuring stable cutting forces; the result is fewer interruptions and improved throughput for job shops and production lines alike Practical advantages for workshop implementation The negative 0° rake angle and the robust insert shape make mounting and handling straightforward in standard toolholders, minimising set-up time. As a coated, indexable solution it supports economic machining strategies: fewer inserts per part produced and predictable reindexing schedules. The insert is explicitly designed for steel (P) applications, so machinists and process planners can allocate it confidently where typical steel heat generation and chip formation are encountered Contact Metav Werkzeuge today for specification matching and ordering information — our consultants will advise on the best insert grade and clamping for the intended steel application and machining conditions. Technical Data Article number: SNMM250924-HU3-WPP20G-WALTER SKU: SNMM250924-HU3-WPP20G-WALTER Type designation: SNMM250924-HU3 ISO designation: SNMM250924-HU3 WPP20G Brand: Walter Tools Facts Grade / sort: WPP20G Series: Tiger·tec Gold Shape: Square 90° Corner radius: 2.4 mm Thickness: 09 Freedom angle / rake: 0° (negative) Chipbreaker: HU3 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: Steel (P) Execution: M Material designation: P (for steel) Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools FAQ What workpiece materials is this insert best suited for? The insert is intended for steel applications; the WPP20G grade and Tiger·tec Gold coating are optimised for machining steels classified in group P. How does the HU3 chipbreaker affect chip formation? The HU3 chipbreaker is designed to produce short, controllable chips under typical turning parameters, reducing the risk of entanglement and improving process reliability for steel turning. Which geometry provides edge strength for interrupted cuts? The square 90° geometry combined with a 2.4 mm corner radius gives increased edge support, making the insert suitable for heavier cuts and interrupted machining. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and product names belong to their respective owners. Brand names and registered trademarks are used solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
SNMM250924-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coated carbide grade, a robust HU5 chipbreaker and a square 25 mm form for secure chip control and long cutting-edge life; order directly via Metav Werkzeuge or consult the technical team for process support. SNMM250924-HU5 WMP20G – square turning indexable insert for stainless steel (Tiger·tec Gold) by Walter Tools The SNMM250924-HU5 WMP20G is a square turning insert designed to provide stable cutting edges and reliable chip formation when machining stainless steels in medium to demanding conditions. Tiger·tec Gold coated carbide for stainless steel Square 90° insert, 25 mm edge length Corner radius 2.4 mm for robust edge strength HU5 chipbreaker for consistent chip control Consistent cutting performance and wear resistance The coated carbide grade WMP20G, applied using Tiger·tec Gold technology, delivers a balance of wear resistance and toughness that is tailored to the demands of stainless steels. The coating reduces adhesion and thermal load at the cutting zone, which in turn limits built-up edge and preserves the cutting geometry for longer tool life. This results in fewer index changes and a more predictable tool lifecycle, supporting continuous production and reduced tooling costs. The design is optimised to maintain a stable cutting edge even under interrupted cuts. Process reliability through geometry and chip control A square 90° shape combined with a HU5 chipbreaker provides secure chip formation and easy indexing for repeatable operations. The negative 0° free angle contributes to edge robustness under heavier engagement, while the 2.4 mm corner radius increases strength at the insert tip for roughing and semi-finishing passes. Together these features enhance process stability, allowing higher metal removal rates with controlled surface condition and less risk of unexpected edge failure. The insert form is therefore suited to a range of turning tasks where reliability is a priority. Application suitability and machining behaviour This insert targets ISO group M applications and is optimised for stainless steels, which are known for toughness and a tendency to form adhesions on the tool. The WMP20G grade promotes secure chip breaking and heat management; it is particularly effective in medium to robust cutting regimes where consistent chip flow and edge life are required. For component manufacturers working with austenitic and other common stainless grades, the insert reduces the need for frequent tool intervention and helps to maintain dimensional stability across batches. Practical integration and economic benefits The SNMM250924-HU5 WMP20G fits standard toolholder systems for square 90° inserts, enabling straightforward replacement and quick indexing. Because of the coated carbide’s extended wear resistance and the proven HU5 chip control, the insert contributes to lower tooling consumption and less downtime. This combination of Tiger·tec Gold coating and robust geometry supports repeatable results and a higher level of process security on the shop floor, making it a sound choice for production-focused turning applications using stainless steels. For machining stainless steels with the reliability of Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored technical advice and order support: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: SNMM250924-HU5-WMP20G-WALTER Designation: SNMM250924-HU5 WMP20G Type: Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Edge length: 25 mm Thickness: 9 mm Corner radius: 2.4 mm Free angle: 0° (negative) Shape: Square 90° Special features Grade: WMP20G Coating technology: Tiger·tec Gold Chipbreaker: HU5 Geometry/execution: M Series: Tiger·tec Gold Suitable for: stainless steels (ISO group M) FAQ Is this insert suitable for machining stainless steels? Yes. The SNMM250924-HU5 WMP20G insert is developed for ISO group M and is optimised for machining stainless steels under medium to robust cutting conditions. What benefits does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating on the WMP20G grade improves wear resistance and reduces adhesion, which helps to prevent built-up edge and extend the effective cutting life of the insert. How does the HU5 chipbreaker affect chip control? The HU5 chipbreaker produces short, controllable chips and supports consistent chip evacuation, contributing to process stability and safer turning operations. Can the insert withstand interrupted cuts and heavier engagements? Yes. The negative 0° free angle and a 2.4 mm corner radius provide enhanced edge strength suitable for interrupted cuts and heavier cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
SNMM250924-HU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a precise 2.4 mm corner radius and the HU5 chipbreaker for consistent performance in steel turning operations; order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. SNMM250924-HU5 WPP20G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools SNMM250924-HU5 WPP20G is a square, 90° indexable turning insert designed for reliable machining of steel with a neutral cutting geometry and robust chip control Tiger·tec Gold coated carbide Optimised for steel machining Square 90° form, 2.4 mm radius HU5 chipbreaker for predictable chips Consistent cutting performance that lowers operating costs The combination of the Tiger·tec Gold coating and the WPP20G grade offers a durable cutting edge suited for the thermal and mechanical demands of steel turning. The coating reduces flank wear and supports longer tool life, while the substrate retains toughness under interrupted cuts. For production environments where tool-change frequency impacts throughput, this insert delivers a measurable improvement in process economy through extended life and steady performance. Emphasis on thermal stability means fewer process interruptions and more consistent component quality. Geometry and chip control that support secure machining A square 90° form with a 2.4 mm corner radius provides both strength at the cutting edge and favourable engagement for medium and finishing passes. The HU5 chipbreaker is tuned to produce controlled chip forms when cutting steel, reducing the risk of entanglement and improving surface finish. The neutral rake (0° negative) promotes reliable insert seating and predictable cutting forces, which is beneficial for repeatable clamping set-ups and stable turning cycles. These geometric choices combine to reduce secondary operations and minimise scrap. Application guidance and process reliability The insert is specified for steel applications according to ISO material group P and is available in tolerance class M, making it suitable for standardised production use. Its balance of wear resistance and toughness supports a wide range of cutting conditions, from medium roughing to finishing. For integrators and workshop planners, the insert helps standardise tooling across similar turning tasks, simplifying inventory while maintaining performance. Process recommendations and cutting data are available on request to match feed and speed to machine capability and workpiece requirements. Why brand and material choice matter for repeatable results Walter Tools' tooling technology is engineered for process security and consistent surface quality. Choosing a coated, grade-matched insert for steel helps ensure stable chip formation and repeatable dimensional outcomes. The combination of a modern coating system with a proven chipbreaker geometry reduces variability in everyday machining and supports confidence in achieving target tolerances without excessive trial and error. Contact Metav Werkzeuge today for tailored tool selection and application advice on Walter Tools indexable inserts, including SNMM250924-HU5 WPP20G — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: SNMM250924-HU5-WPP20G-WALTER Designation: SNMM250924-HU5 WPP20G Manufacturer: Walter Tools Facts Plate size: 25 mm Corner radius: 2.4 mm Thickness: 9 mm Negative rake: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU5 Plate form: Square 90° Material application: Steel (ISO group P) FAQ What materials is this insert designed for? The insert is intended for machining steel; the WPP20G grade and Tiger·tec Gold technology optimise performance for ISO group P materials. Which chip shape can be expected with the HU5 chipbreaker? The HU5 chipbreaker promotes predictable, short-to-medium chips when cutting steel, improving chip evacuation and surface quality. Is the geometry suited for finishing as well as roughing? Yes, the square 90° form with a 2.4 mm radius allows both medium roughing and finishing passes, offering a balance between edge strength and surface finish. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold enhances wear resistance and thermal stability, which leads to longer tool life and more consistent machining results in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
SNMM250924-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the HU5 chipbreaker for reliable machining of stainless steels and heat‑resistant alloys; the robust 2.4 mm corner radius increases edge strength and extends service life. Order directly via Metav Werkzeuge or consult our application specialists for process‑specific recommendations. SNMM250924-HU5 WSM30S – indexable turning insert by Walter Tools for stainless steels and superalloys The SNMM250924-HU5 WSM30S is an indexable turning insert designed to deliver stable performance when machining stainless steels and heat‑resistant superalloys, combining a coated carbide grade with a dedicated chipbreaker and strength‑oriented geometry. Tiger·tec Silver coated carbide For stainless steels and superalloys HU5 chipbreaker for secure chip control Square 90° geometry with 2.4 mm radius Greater machining productivity for stainless and heat‑resistant alloys The combination of a high‑performance coating and a geometry aimed at stability yields measurable productivity benefits when turning materials in ISO groups M and S. The WSM30S grade, based on Tiger·tec Silver, is optimised for material groups that tend to work‑harden or generate heat; this leads to more consistent cutting forces and fewer interruptions for tool change. For operations where predictable tool life and reliable surface quality matter, the insert supports higher material removal rates while maintaining process stability. Coating and grade that improve thermal stability and edge life The insert’s Tiger·tec Silver treatment produces a coated carbide surface that resists thermal degradation and preserves the cutting edge under elevated temperatures common with stainless steels and nickel‑based alloys. The result is a stable cutting edge that reduces the risk of built‑up edge and premature flank wear. For shops aiming to lower tooling costs per component, the grade’s balance between toughness and wear resistance translates into fewer indexings and longer intervals between replacements. Predictable chip control and robust geometry for safe cuts Geometry choices influence both machining security and component finish. The HU5 chipbreaker is tailored to the insert’s profile to produce short, controlled chips in difficult‑to‑machine alloys, delivering secure chip control and reducing the risk of tangling. The square 90° shape and 0° negative rake combine with a corner radius of 2.4 mm to give strength at the cutting tip, enabling stable heavy cuts and improved tool life. This geometry also supports repeatable results when turning feature critical components. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to discuss cutting parameters for specific stainless steels or superalloys — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMM250924-HU5-WSM30S-WALTER Article designation: SNMM250924-HU5 WSM30S Manufacturer: Walter Tools Facts Size: 25 Shape: Quadrat 90° Corner radius: 2,4 Thickness code: 09 Relief angle: 0° (negativ) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: HU5 Geometry: Square, 90° Material suitability: S / M (superalloys/titanium and stainless steels) Application focus: machining of stainless steels and heat‑resistant alloys FAQ What materials is this insert best suited for? The SNMM250924-HU5 WSM30S insert by Walter Tools is optimised for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering a balance of toughness and wear resistance. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on this turning insert promotes secure chip control, producing short, manageable chips that reduce the risk of entanglement and help maintain consistent surface quality. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM30S grade increases thermal resistance and edge stability, which helps to extend tool life and maintain cutting performance in demanding materials. Is the square 90° shape suitable for heavy cuts? Yes, the square 90° geometry combined with a 2.4 mm corner radius and 0° negative rake provides a robust cutting edge suited to heavier depths of cut and stable turning operations. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel von Walter Tools um originale fabrikneue Waren des Herstellers.
SNMM250924-HU7 WPP10G Wendeplatten - Walter Tools
Benefit from the SNMM250924-HU7 WPP10G turning insert’s Tiger·tec Gold coating, robust HU7 chipbreaker and durable square geometry to achieve stable, high-performance steel turning; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. SNMM250924-HU7 WPP10G turning insert — Walter Tools, Tiger·tec Gold, for steel turning SNMM250924-HU7 WPP10G is a precision turning indexable insert designed for efficient machining of steel, combining a coated-carbide grade and a dedicated chipcontrol geometry for reliable, repeatable performance Tiger·tec Gold coating for high wear resistance Optimised chip control with HU7 breaker Square 90° geometry for versatile turning Corner radius 2.4 mm for predictable edge life Consistent productivity from optimised coating and geometry The insert’s Tiger·tec Gold coating and coated carbide substrate ensure a balance between wear resistance and toughness, delivering longer tool life under typical steel cutting conditions. The combination of the coating technology and the WPP10G grade reduces flank wear and supports stable cutting forces, which leads to fewer tool changes and less machine downtime. This translates into measurable productivity gains and predictable process windows, especially in serial production. Precise chip control and edge stability for reliable turning Equipped with the chipbreaker HU7 and a negative rake 0°, this insert provides controlled chip formation and robust cutting action in interrupted or steady cuts. The square 90° plate shape and corner radius 2.4 mm contribute to consistent edge engagement and dimensional reliability on workpieces. For operators and process planners, that means fewer scrap parts and simpler post-process inspection routines due to improved surface integrity and repeatable results. Practical versatility and application guidance for steel machining Classified for the P group, the insert is optimised for machining a wide range of steel grades — from unalloyed to alloyed steels — and adapts well to common turning tasks. The plate size and form make it suitable for general turning, facing and moderate profiling operations. For shops looking to standardise tooling across multiple machines, the insert offers a straightforward option that pairs well with standard toolholders and established cutting parameters, easing tool management and inventory planning. Contact Metav Werkzeuge for detailed cutting data, toolholder compatibility and ordering information for this Walter Tools Tiger·tec Gold insert — Metav Werkzeuge’s technical consultants will advise on optimal cutting parameters and delivery options Technical data Article number: SNMM250924-HU7-WPP10G-WALTER SKU: SNMM250924-HU7-WPP10G-WALTER Product type: Drehwendeschneidplatte (turning indexable insert) Brand: Walter Tools Core data Plate form: Quadrat 90° Plate size: 25 Corner radius: 2,4 Thickness: 09 Freedom angle / rake: 0° (negativ) Chipbreaker: HU7 Grade / sort: WPP10G Series: Tiger-tec Gold Tolerance class: M Execution: M Materials & special features Coating: Tiger·tec Gold (coated carbide technology) Material suitability: Steel (P) Application focus: Turning/steel machining Design: Square insert with HU7 chipbreaker and 2.4 corner radius Wear-resistant and balanced toughness for serial production FAQ What materials is this insert suitable for? The SNMM250924-HU7 WPP10G insert is specified for steel machining (ISO group P), optimised to handle the heat generation and chip formation typical of steel turning. How does the Tiger·tec Gold coating benefit cutting performance? Tiger·tec Gold on the WPP10G grade increases wear resistance while maintaining toughness, which extends tool life and supports stable cutting in the Walter Tools insert. Which chipbreaker is fitted and what is its effect? The HU7 chipbreaker promotes controlled chip formation and evacuation; when paired with the insert’s negative 0° rake, it enhances reliability in both continuous and interrupted cuts. Is the insert suitable for facing and profiling operations? Yes; the square 90° geometry and 2.4 corner radius provide versatility for facing, general turning and moderate profiling tasks using the Walter Tools insert. What tolerance and execution class does the insert have? The insert is supplied in tolerance class M with execution M, ensuring consistent dimensional accuracy for repeatable machining results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for explanation purposes only. The item offered is an original, brand-new factory product of the manufacturer.
SNMM250924-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust HU7 chipbreaker geometry and a square 90° form for stable, productive turning of steels; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. SNMM250924-HU7 WPP20G — Indexable turning insert, Tiger·tec Gold, Walter Tools SNMM250924-HU7 WPP20G is a square indexable turning insert designed for machining steel in general engineering and production environments, offering a balance of wear resistance and toughness. *Tiger·tec Gold coating for increased tool life *Suitable for steel (ISO P) machining *Square 90° insert, corner radius 2.4 mm *Negative 0° rake, robust chipbreaker HU7 Consistent performance from Tiger·tec Gold for longer tool life The SNMM250924-HU7 WPP20G is manufactured with the Tiger·tec Gold coating technology, a multi-layer CVD/PVD approach that increases wear resistance and thermal stability under typical steel cutting conditions. This coating reduces flank wear and preserves the cutting edge at higher temperatures, which translates into longer intervals between index changes and fewer tool interventions on the machine. The result is improved uptime and lower production costs per part while maintaining a predictable tool life in serial or batch operations. Reliable chip control and stable cutting with HU7 geometry The combination of the HU7 chipbreaker and a negative 0° rake creates a robust cutting condition that helps to control chip shape and evacuation when machining steels (ISO P). The HU7 geometry is engineered to break and curl chips reliably under varying depths of cut, reducing the risk of entanglement and minimising secondary operations to clear swarf. This leads to a safer, more reproducible machining process and supports higher metal removal rates where stable chip flow is required. Geometry and dimensions that favour productivity and cost-efficiency The insert’s square 90° form with a corner radius of 2.4 mm and a nominal size of 25 mm provides a solid edge strength suitable for medium to heavy turning tasks. With a thickness of 9 mm, the insert offers rigidity and resistance to deflection, which is beneficial for interrupted cuts or heavier feed rates. The square geometry also allows multiple indexings per insert, improving cost efficiency through repeated use of the available cutting corners before disposal. Application suitability and process security for steel machining Grade WPP20G is a coated carbide grade optimised for steel applications (ISO P), combining wear resistance with enough toughness to withstand typical variability in steel batches. The grade’s properties support both steady finishing and more demanding roughing passes depending on cutting data and machine capabilities. When integrated into a well-defined process — correct clamping, stable turret setup and appropriate cutting parameters — the insert contributes to process security, consistent part quality and repeatable surface finishes. For application advice on Walter Tools SNMM250924-HU7 WPP20G or to confirm suitability for specific steel alloys, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support Technical Data Article number / SKU: SNMM250924-HU7-WPP20G-WALTER Designation: SNMM250924-HU7 WPP20G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 25 mm Thickness: 9 mm Corner radius: 2.4 mm Geometry: Square 90° Rake angle: 0° (negative) Tolerance class / execution: M / M Special features Series: Tiger·tec Gold Grade: WPP20G Substrate / composition: Coated carbide Chipbreaker: HU7 Intended material group: Steel (ISO P) Suitable for general turning and robust cutting conditions FAQ Which materials is this insert designed for? The SNMM250924-HU7 WPP20G is formulated for machining steels (ISO P); the WPP20G grade and Tiger·tec Gold coating provide the wear resistance and toughness required for standard steel alloys. How does the Tiger·tec Gold coating benefit the machining process? Tiger·tec Gold on the SNMM250924-HU7 WPP20G improves thermal resistance and reduces flank wear, resulting in longer tool life and more consistent edge retention under steel-cutting conditions. What is the role of the HU7 chipbreaker? The HU7 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation for a range of depths of cut, enhancing process security and reducing the need for manual chip handling. What are the key geometry details to consider for setup? The insert is a square 90° form with a 2.4 mm corner radius and 25 mm size, with a 0° negative rake; its 9 mm thickness supports rigidity for heavier cuts and interrupted turning. Can this insert be used for finishing as well as roughing? Yes; with appropriate cutting data the WPP20G grade balances wear resistance and toughness, allowing use in both finishing and more aggressive turning operations on steels. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for identification and explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
SNMM250924-HU7 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of reliable wear resistance, precise chip control and a geometry optimised for steel turning to maintain consistent productivity on the shop floor; order directly via Metav Werkzeuge or contact the consultants for application support. SNMM250924-HU7 WPP30G indexable turning insert – coated carbide, for steel (Walter Tools) The SNMM250924-HU7 WPP30G is an indexable turning insert engineered for efficient general turning of steel components, offering a coated-carbide grade and a square 90° form for robust machining. Tiger·tec Gold coating for consistent wear resistance Designed for steel machining (ISO P group) Square 90° form with 2.4 mm corner radius Negative 0° relief and HU7 chipbreaker Prolonged tool life through advanced coating technology The Tiger·tec Gold coating together with the WPP30G grade provides a coated carbide construction that balances hardness and toughness for extended service life in steel turning. This combination lowers flank and crater wear under typical cutting temperatures encountered with unalloyed and alloyed steels, meaning fewer indexings and predictable change intervals. The result is a reduction in downtime and improved process stability for series production. Stable chip formation and surface quality from tailored geometry The insert’s HU7 chipbreaker and square 90° profile, combined with a 2.4 mm corner radius, create reliable chip control and consistent contact conditions at the cutting edge. The negative 0° relief enhances edge strength for interrupted cuts and shoulder machining, reducing the risk of chipping while supporting steady surface finishes. For operators seeking repeatable results, the geometry is optimised to produce short to medium-length chips and to maintain edge integrity under varying cutting data. Designed for productivity in ISO P applications Classified for the ISO P material group, this indexable insert is intended specifically for machining steel and similar alloys. The grade focuses on a practical balance: sufficient wear resistance for high-volume tasks and enough toughness for versatile use across common turning operations. Choosing this insert supports higher machine utilisation and consistent component quality, particularly in mixed batch and production environments where tool reliability translates directly into output predictability. For specific application advice, availability or to discuss the suitability of Walter Tools inserts for a given steel grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for fast, competent support. Technical data Article number: SNMM250924-HU7-WPP30G-WALTER Name: Drehwendeschneidplatte SNMM250924-HU7 WPP30G Product type: indexable turning insert Brand: Walter Tools Facts Insert size: 25 mm Thickness: 09 Corner radius: 2.4 mm Relief angle: 0° (negative) Shape: square 90° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: HU7 Material group: Steel (ISO P) Execution: M FAQ Which materials are suitable for this insert? The SNMM250924-HU7 WPP30G is specified for the ISO P group and is suitable for machining a wide range of steels, including unalloyed and alloyed grades. What benefits does the Tiger·tec Gold coating bring? Tiger·tec Gold provides balanced wear resistance and toughness for Walter Tools inserts, extending tool life and improving consistency in steel turning operations. Is the HU7 chipbreaker suitable for interrupted cuts? Yes, the HU7 chipbreaker and the negative 0° relief enhance edge durability, making the insert resilient during interrupted cuts and shoulder work. How does the square 90° form influence application choice? The square 90° shape with a 2.4 mm corner radius offers robust edge support for facing and general turning, delivering stable cutting conditions and predictable wear. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only; there is no affiliation between the seller and the named manufacturers. The offered article is an original, factory-new product of the stated manufacturer.
SNMX090408-F27 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the reliable combination of Tiger·tec Silver coating, the WKP25S carbide grade and the stable square 90° geometry to boost productivity in steel and cast iron milling; order directly via Metav Werkzeuge or consult our specialists for material-specific recommendations. SNMX090408-F27 WKP25S — Milling insert (square 90°) by Walter Tools, Tiger·tec Silver, for steel & cast iron SNMX090408-F27 WKP25S is a square milling indexable insert designed for productive machining of steel and cast iron in general milling operations Tiger·tec Silver coated grade WKP25S Suitable for steel and cast iron machining Square 90° geometry for stable milling Negative 0° rake with 0.8 mm corner radius Reliable performance in steel and cast iron milling The combination of the WKP25S coated carbide grade and the Tiger·tec Silver technology delivers consistent tool life and cutting-edge performance when machining P- and K-group materials. The grade has been developed to manage the thermal and mechanical loads typical for steel and the abrasive nature of cast iron, ensuring controlled wear and repeatable results. By using a coated hardmetal grade, production runs benefit from reduced downtime and fewer insert changes, which improves overall process efficiency. Coating and grade engineered for productivity The Tiger·tec Silver coating provides an optimised surface and adhesion layer that reduces friction and improves heat resistance during high metal-removal rates. The WKP25S is a coated carbide sort designed for balanced performance: good wear resistance and robust edge stability. For shops seeking higher uptime, these properties translate into longer uninterrupted cycles and dependable component tolerances — particularly important when batch sizes or component accuracy matter. Geometry and edge design that aid process security A square 90° insert form and a 0.8 mm corner radius give robust edge strength for face and shoulder milling, while the 0° (negative) rake delivers a conservative cutting geometry that favours stability in interrupted cuts and roughing tasks. The insert thickness and nominal dimensions ensure proper clamping and repeatability in standard pocket-type toolholders. In practice, this geometry reduces vibration and preserves the cutting edge during demanding operations, contributing to predictable surface finishes and dimensional control. Practical benefits for production planning and tool choice Choosing this indexable insert supports a pragmatic machining strategy: the coated grade and negative geometry combine to offer process reliability across a range of steels and cast irons according to ISO 513 groupings. The insert’s specification aligns with established toolholder systems and milling strategies, making it straightforward to integrate into existing setups. For purchasing and inventory, the standardised ISO designation aids quick identification and replacement, simplifying tool management in the workshop. For availability, technical matching or procurement support contact Metav Werkzeuge — their consultants can advise on toolholder compatibility and optimal cutting data for the intended materials. Technical Data Article number: SNMX090408-F27-WKP25S-WALTER Product type: Milling indexable insert Series: Tiger·tec Silver Grade: WKP25S Manufacturer: Walter Tools Geometry: Quadrate 90° Facts Insert size: 09 Thickness: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Applicable material groups: P (steel), K (cast iron) Cutting chipbreaker: F27 Execution: X Plate form: Square 90° FAQ What materials is this insert suitable for? The SNMX090408-F27 WKP25S insert with the WKP25S grade is suitable for ISO group P (steel) and K (cast iron) applications. How does the Tiger·tec Silver coating help in machining? The Tiger·tec Silver coating on the insert reduces friction and increases thermal resistance, improving wear behaviour and tool life under demanding cutting conditions. What advantage does the square 90° geometry provide? Square 90° geometry offers robust edge strength for face and shoulder milling, helping to maintain stability and surface quality in both roughing and finishing passes. Is the negative 0° rake suited to interrupted cuts? Yes, the negative 0° rake and the insert’s edge design support stable cutting in interrupted and heavy milling applications, enhancing process security. How is the corner radius relevant to machining results? The 0.8 mm corner radius balances edge strength and achievable surface finish, making the insert versatile for general-purpose milling in steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Mention of brand names and trademarks serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the stated manufacturer.
SNMX090408-F27 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Wear-resistant Tiger·tec Silver coating and broad material coverage (P / K) to keep machining stable and predictable; the square 90° form with a 0.8 corner radius adds edge strength for interrupted cuts. Order or request application advice via Metav Werkzeuge for a fast integration into production. SNMX090408-F27 WKP35S Milling insert (Square 90°, Tiger·tec Silver) – Walter Tools A SNMX090408-F27 WKP35S indexable milling insert engineered for productive machining of steel and cast iron in demanding industrial applications Tiger·tec Silver coating for wear resistance Suitable for steel (P) and cast iron (K) Square 90° form with 0.8 corner radius Negative 0° rake for stable cutting Consistent performance across steel and cast iron for reliable throughput The Walter grade WKP35S, produced in the Tiger·tec Silver family, is optimised to handle the thermal and mechanical demands typical of machining steel and cast iron. As an indexable insert, it combines a coated carbide substrate with a robust surface layer that resists both adhesive and abrasive wear, which translates into longer cutting intervals and more predictable tool life. This stability supports higher machine utilisation and reduces unplanned downtime, making the insert a rational choice where consistent productivity matters. Geometry that secures edges under load and supports repeatable results A square 90° plate form and a 0.8 mm corner radius create a geometry focused on edge strength and versatility in slotting, roughing and shoulder milling. The negative 0° rake increases cutting-edge robustness and damps vibration during interrupted cuts, while the square format provides four usable corners for economy per index. Together these features enhance process security and enable repeatable part quality in batch production and mixed-volume work. Practical advantages for shop-floor integration and inventory control Using a standard ISO-style insert designation simplifies tool management: the compact designation SNMX090408-F27 WKP35S aligns with common toolholders and clamping systems, reducing changeover complexity. The coated grade supports predictable wear behaviour, which aids in tool-life planning and cost calculations. For operations seeking to raise throughput, the combination of reliable edge stability and established coating technology reduces the frequency of tool exchanges and supports continuous production flow. Coating technology explained for better application decisions The Tiger·tec Silver coating is a multi-layer, PVD-style technology designed to improve surface hardness and thermal resistance while maintaining a stable chip formation behaviour on both steel and cast iron. The WKP35S grade is a coated carbide variant tuned for the heat and chip characteristics given by ISO material groups P and K. In practice this means fewer unexpected tool failures and improved surface finishes under comparable cutting conditions, especially when cutting speeds and feed rates are optimised for the respective workpiece material. For precise application advice or to specify the Walter Tools SNMX090408-F27 WKP35S for a particular machining task, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMX090408-F27-WKP35S-WALTER Designation: SNMX090408-F27 WKP35S Product type: Fräswendeschneidplatte / milling insert Series: Tiger-tec Silver Manufacturer: Walter Tools Core data Plate size: 09 Thickness: 04 Corner radius: 0.8 Rake angle: 0° (negativ) Shape: Quadrat 90° Special features Grade: WKP35S Coating/technology: Tiger·tec Silver Material group: P / K Suitable for: Stahl, Gusseisen Chipbreaker: F27 Tolerance class: M Execution: X FAQ Which materials can this insert machine efficiently? The SNMX090408-F27 WKP35S is specified for machining steel (ISO group P) and cast iron (ISO group K); the coating and substrate combination is selected to handle the thermal and abrasive conditions of these materials. What does the Tiger·tec Silver coating deliver in shop practice? Tiger·tec Silver improves resistance to adhesive and abrasive wear and supports stable chip formation; in combination with the WKP35S grade it helps to extend cutting intervals and maintain surface quality on both steel and cast iron parts. Why is the 0.8 corner radius important for industrial milling? A 0.8 mm corner radius increases the cutting-edge strength and reduces the risk of chipping under load, which is beneficial for interrupted cuts and operations that demand robust edge endurance. Is the square 90° geometry suitable for shoulder milling and slotting? Yes; the square 90° form provides a strong cutting edge for shoulder milling and slotting, and offers multiple indexable corners for economic use of the insert. What information helps to select the right insert grade for a job? Consider the workpiece material (P / K), the cutting conditions (feed, speed, interrupted cuts), and the required surface finish; the SNMX090408-F27 WKP35S is tuned for steel and cast iron where wear resistance and edge stability are priorities. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMX090408-F57 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, precise chip control F57, and a stable square 90° geometry to increase process reliability when machining abrasive cast iron. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMX090408-F57 WKK25G — Square milling insert for cast iron machining (Walter Tools) SNMX090408-F57 WKK25G is a square milling insert engineered for reliable, high‑productivity machining of cast iron components in industrial milling applications SNMX090408-F57 WKK25G by Walter Tools Tiger‑tec Gold coating for abrasive cast iron Square 90° form with 0.8 mm corner radius Negative 0° rake for stable cutting Increase tool life on abrasive cast iron with coated carbide technology The insert combines a coated carbide grade from the Tiger‑tec Gold series with the WKK25G specification, designed specifically for the abrasive nature of cast iron. This coating strategy improves resistance against abrasive wear and extends productive tool life, which leads to fewer tool changes and more consistent cycle times. The material pairing is optimised for short, brittle chips typical of cast iron, contributing to predictable tool performance in series production. Stable machining and predictable chip behaviour for secure processes Equipped with the F57 chipbreaker and a square 90° plate form, the design promotes repeatable chip formation and evacuation. The negative 0° rake increases cutting edge strength for interrupted cuts and heavy radial engagement, enhancing process stability. The 0.8 mm corner radius supports a robust cutting edge that reduces micro‑chipping under fluctuating loads, improving surface consistency and reducing rework. Practical benefit for workshop integration and set‑up efficiency The insert is coded and dimensioned to fit standard toolholders for square inserts, simplifying inventory and tool change procedures. Size and thickness codes ensure compatibility across common cutter bodies, helping to streamline tool management. For machining lines focusing on cast iron, the grade allocation and chip control reduce downtime and make the production flow more economical by lowering tool consumption and stabilising quality. Contact Metav Werkzeuge for tailored machining advice or to discuss application‑specific fitting and availability of the SNMX090408-F57 WKK25G insert Technical data SKU: SNMX090408-F57-WKK25G-WALTER Designation: SNMX090408-F57 Grade: WKK25G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free rake: 0° (negative) Size code: 09 Thickness code: 04 Tolerance class: M Special features Coated carbide grade Tiger‑tec Gold Chipbreaker: F57 Plate shape: Square 90° Material application: cast iron Execution: X ISO designation: SNMX090408-F57 WKK25G FAQ What materials is this insert intended for? The SNMX090408-F57 WKK25G insert is specified for machining cast iron; the grade and chipbreaker are optimised for the abrasive and brittle behaviour of these materials. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WKK25G grade increases abrasion resistance and cutting edge life when machining abrasive cast iron, resulting in fewer tool changes and more stable productivity. How does the F57 chipbreaker affect chip control? The F57 chipbreaker produces short, controllable chips suitable for cast iron machining, improving evacuation and reducing the risk of recutting during heavy or interrupted cuts. Is the geometry suitable for heavy‑duty milling operations? Yes; the square 90° form combined with a negative 0° rake and a 0.8 mm corner radius provides robust cutting edges that enhance stability in demanding milling tasks. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory‑new goods of the manufacturer. Walter Tools is a registered brand of Walter AG, part of the Sandvik Group.
SNMX090408-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for stable, high-productivity milling of steel and cast iron; the square 90° geometry with a 0.8 mm corner radius and chipbreaker F57 promotes predictable chip formation and process reliability. Order directly via Metav Werkzeuge or contact our consultants for application advice. SNMX090408-F57 WKP25S milling indexable insert – square 90°, 0° negative rake (Walter Tools) SNMX090408-F57 WKP25S is an indexable milling insert designed for productive machining of steel and cast iron in general milling applications Tiger·tec Silver coated carbide WKP25S grade for steel and cast iron Square 90° geometry with 0.8 mm radius Chipbreaker F57 for reliable chip control Improved productivity through a robust, coated cutting grade The combination of the Tiger·tec Silver coating and the WKP25S cutting grade delivers a high level of wear resistance and thermal stability, which translates into longer tool life and fewer index changes on the machine. Coated carbide grades such as this are formulated to withstand the heat and abrasive conditions that occur when machining steel and cast iron, so cycle times remain steady and tool cost per part is reduced. The result is a direct improvement in machine uptime and predictable process outputs. Stable cutting geometry that enhances surface quality A square 90° insert geometry paired with a 0° negative rake provides a robust cutting edge that tolerates interrupted cuts and shoulder milling. The 0.8 mm corner radius increases edge strength and helps maintain dimensional accuracy on heavy engagement passes. By favouring stability over aggressive shearing, this insert supports consistent surface finish and repeatable tolerances, making it suitable for batch production where reproducibility matters. Controlled chip formation for safer, more efficient machining The integrated chipbreaker F57 is engineered to manage the typical swarf behaviour of steel and cast iron, encouraging short, controllable chips that evacuate reliably from the cutting zone. Improved chip control reduces the risk of entanglement and minimises secondary finishing work. For shops aiming to optimise process flows, the combination of geometry and chipbreaker reduces both cycle interruptions and the need for manual clearing, supporting a cleaner, safer working environment. Application clarity and grade selection for reliable results The insert’s material compatibility is expressly with workpiece groups P and K according to ISO classification — that is, steel and cast iron — which aligns with the grade’s thermal and wear characteristics. The WKP25S grade is a coated carbide variety within the Tiger·tec Silver family, offering balanced performance across a broad range of steels and grey or nodular cast irons. For process engineers, this provides a straightforward selection for versatile milling tasks without frequent revalidation of cutting data. For process-specific recommendations using Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored cutting-data support and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMX090408-F57-WKP25S-WALTER Designation: SNMX090408-F57 WKP25S Product type: Milling indexable insert Manufacturer: Walter Tools Grade/series: WKP25S / Tiger·tec Silver Core specifications Shape: Square 90° Corner radius: 0.8 mm Free angle: 0° (negative) Chipbreaker: F57 Size: 09 Thickness: 04 Tolerance class: M Material designation: P / K Special features Coating technology: Tiger·tec Silver Insert material: Coated carbide Main applications: Steel and cast iron machining Series: Tiger-tec Silver FAQ What materials is this insert suited for? The SNMX090408-F57 WKP25S insert (Walter Tools, WKP25S grade) is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the 0° negative rake affect cutting performance? A 0° negative rake gives the insert a robust cutting edge that resists chipping under interrupted cuts; the SNMX090408-F57 WKP25S benefits from this geometry when heavy engagement or shoulder milling is required. Can the chipbreaker F57 handle long continuous cuts? Yes. The chipbreaker F57 on this SNMX090408-F57 WKP25S insert is designed to produce controlled, short chips in steel and cast iron, improving evacuation during sustained milling operations. Which series does this grade belong to and what advantage does it bring? The WKP25S grade is part of the Tiger·tec Silver series by Walter Tools; this coating technology enhances thermal and abrasive wear resistance, supporting longer tool life and consistent component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named manufacturers. The item offered is an original, new product from the manufacturer Walter Tools.
SNMX090408-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger‑tec Gold coating and the WKP35G grade for reliable edge life and broad material coverage; the square 90° geometry with a 0.8 mm corner radius delivers stable milling in steel and cast iron. Order directly via Metav Werkzeuge or contact the consultants for application-specific cutting data. SNMX090408-F57 WKP35G – Square 90° milling insert, Tiger‑tec Gold, for steel and cast iron (Walter Tools) The SNMX090408-F57 WKP35G is a square indexable milling insert engineered for high-productivity face and shoulder milling of steel and cast iron, offering robust edge stability and optimised chip control. Tiger‑tec Gold coating for long tool life Designed for steel and cast iron (ISO P/K) Square 90° geometry for versatile milling 0.8 mm corner radius for robust edge Durable cutting performance through advanced coating and grade The combination of the Tiger‑tec Gold technology and the WKP35G grade provides a balance between wear resistance and toughness, which is especially beneficial during interrupted cuts and high-volume runs. The specialised coated carbide structure reduces flank wear and stabilises the cutting edge, resulting in consistent tool life and fewer index changes. For operations where repeatable surface finish and predictable regrinds are important, this specification supports steady production and simplified tool management. Geometry and chip control that increase process reliability A square 90° insert form with a 0° negative rake and a 0.8 mm corner radius gives a robust support geometry that resists edge chipping and reduces the risk of premature failure. The F57 chipbreaker is tuned to break and evacuate chips efficiently when machining steels and cast irons, lowering the chance of built-up edge and improving surface quality. These geometric choices translate into greater process security and stable cutting forces, which benefits both tool life and machine spindle loads. Practical guidance for workshop integration and tool selection The insert’s medium tolerance class M and execution X facilitate interchangeability in common Walter Toolholders and similar systems; the nominal thickness and size code support a wide range of cutter bodies. Given the material designation P / K (ISO P for steel, K for cast iron), this insert is recommended where mixed production demands both toughness and abrasion resistance. For best results, match feeds and speeds to the machine rigidity and workpiece clamping and consult manufacturer cutting data for optimised parameters. For tailored recommendations on using Walter Tools Tiger‑tec Gold inserts in specific milling applications, contact Metav Werkzeuge for expert cutting data and component matching – Metav Werkzeuge is ready to advise on selection and integration. Technical Data Article number: SNMX090408-F57-WKP35G-WALTER Designation: SNMX090408-F57 WKP35G Product type: Fräswendeschneidplatte (milling insert) Series: Tiger‑tec Gold Grade: WKP35G Execution: X Facts Shape: Square 90° Size code: 09 Thickness code: 04 Corner radius: 0.8 Relief angle: 0° (negative) Chipbreaker: F57 Tolerance class: M Material designation: P / K Special features Coating: Tiger‑tec Gold (coated carbide) Suitable for: Steel (ISO P), Cast iron (ISO K) Main applications: Face milling, shoulder milling Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The SNMX090408-F57 WKP35G is designed for steel and cast iron machining (ISO groups P and K), with the WKP35G grade tuned for typical steel heat and chip behaviour. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes controlled chip formation and evacuation when cutting steels and cast irons, helping to reduce built‑up edge and supporting a consistent surface finish. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating on this insert increases wear resistance and thermal stability, extending edge life and maintaining cutting performance under high productivity conditions. Is the geometry suitable for interrupted cuts? Yes, the square 90° form with a 0.8 mm corner radius and 0° negative rake gives the insert robust edge support that enhances resistance to chipping during interrupted milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer.
SNMX090408-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and the robust WKP35S carbide grade for consistent productivity in steel and cast iron milling; the square 90° geometry with a 0.8 mm corner radius and 0° negative rake ensures stable cutting engagement and predictable tool life. Order via Metav Werkzeuge or consult our technical advisors if further specification is required. SNMX090408-F57 WKP35S milling indexable insert by Walter Tools — Tiger·tec Silver grade, square 90° geometry The SNMX090408-F57 WKP35S is a square 90° milling indexable insert designed for productive machining of steel and cast iron, combining a coated carbide grade with a controlled chipbreaker for stable material removal. Tiger·tec Silver coated carbide grade WKP35S Suitable for steel and cast iron machining Square 90° insert with 0.8 mm corner radius Negative rake 0° for stable engagement Greater process reliability through optimised coating and grade The Tiger·tec Silver coating, paired with the WKP35S coated carbide grade, delivers improved resistance against abrasive wear and thermal loading common in milling steel and cast iron. For users seeking measurable process stability, the combination of coating technology and carbide substrate reduces flank wear and extends cutting edge life under typical production feeds. The designation P / K indicates suitability for the ISO groups P (steel) and K (cast iron), clarifying the insert’s intended material range and helping production planners select the correct geometry without ambiguity. Stable cutting geometry for predictable machining results A square 90° insert form with a 0.8 mm corner radius offers a balance between strength and profile definition: the corner radius increases edge robustness during intermittent cuts, while the square seat enables consistent indexability and repeatable orientation in the cutter body. The 0° negative rake provides a neutral engagement that lowers the risk of chatter and improves stability on heavy or interrupted cuts. These geometry choices translate into fewer tool changes and more consistent cycle times on medium- to heavy-duty milling operations. Efficient chip control and economical throughput The F57 chipbreaker is engineered to produce short, controllable chips when machining both steel and cast iron, contributing to safer chip evacuation and less manual intervention at the machine. In a production context, such chip control reduces downtime for clearing and improves machining reliability, which in turn supports higher net productivity. The insert’s series and grade focus on achieving long run lengths and consistent surface quality, making it a practical choice where repeatability and process economy are priorities. Contact Metav Werkzeuge for tailored recommendations on tool holders and application parameters for Walter Tools inserts, or request specific cutting data to match the machining task. Technical data Article number: SNMX090408-F57-WKP35S-WALTER SKU: SNMX090408-F57-WKP35S-WALTER Product: Milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Shape: Square 90° Chipbreaker: F57 Facts Corner radius: 0.8 mm Thickness: 04 (code) Size: 09 (code) Rake: 0° (negative) Tolerance class: M Execution: X Special features Coating: Tiger·tec Silver (coated carbide) Material suitability: Steel (P) and Cast iron (K) Indexable insert format for milling cutters Robust edge for interrupted cuts and heavy engagement FAQ What materials is this insert intended for? The SNMX090408-F57 WKP35S insert is specified for steel (P) and cast iron (K) applications in accordance with the grade’s capabilities. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating improves wear resistance and thermal stability, which extends edge life and supports more consistent performance across production runs. What is the effect of the 0° negative rake on cutting? A 0° negative rake offers neutral engagement that enhances stability, particularly beneficial for interrupted cuts or where a robust cutting edge is required. Is the insert suitable for heavy milling or finishing? The square 90° form with a 0.8 mm corner radius provides strength for heavier engagements while still enabling acceptable surface finishes when parameters are adjusted appropriately. How is chip control managed with this insert? The F57 chipbreaker is designed to produce short, manageable chips in both steel and cast iron, aiding evacuation and reducing the need for manual clearing. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names belong to their respective owners. Brand names and protected product names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the global leaders in precision tools for metalworking and is part of the Sandvik group.
SNMX090408-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WSM35G grade for reliable machining of stainless steel and heat‑resistant superalloys; the square 90° geometry with a 0.8 mm corner radius and F57 chipbreaker ensures stable cutting and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application advice. SNMX090408-F57 WSM35G – milling indexable insert (Tiger‑tec Gold, stainless steel & superalloys) by Walter Tools The SNMX090408-F57 WSM35G is a square 90° milling indexable insert designed for heavy and finishing operations on stainless steel and heat‑resistant superalloys, combining a coated carbide grade with a chipbreaker for stable material removal Tiger‑tec Gold coating for heat resistance WSM35G grade for stainless steel and superalloys Square 90° geometry with 0.8 mm corner radius F57 chipbreaker for stable chip formation Consistent cutting performance through advanced coating technology The insert is specified in the WSM35G grade, part of the Tiger‑tec Gold series, a coated carbide solution engineered for difficult‑to‑cut materials. Coated carbide means a hard substrate with one or more protective and friction‑reducing layers; this combination increases heat resistance and reduces adhesive wear during prolonged milling of stainless steel and superalloys. The practical benefit for production is fewer interrupted cycles due to tool wear and a lower rate of unexpected downtimes, supporting predictable machining cycles and improved throughput. Geometry that stabilises the cut and improves surface finish A square 90° plate form and a corner radius 0.8 mm deliver robust edge support for interrupted cuts and heavy depth‑of‑cut operations. The negative 0° (negative) relief contributes to edge strength under high mechanical load, while the F57 chipbreaker promotes controlled chip segmentation and evacuation. Together these design choices reduce the likelihood of built‑up edge and ensure a consistent surface quality, so operators achieve repeatable results in serial milling with fewer rework steps. Productivity gains and process reliability on the shop floor With a focus on stable chip formation and edge life, the insert supports higher material removal rates and longer tool life, which translates directly into cost efficiency per part. Marked with tolerance class M and coded dimensions such as thickness 04 and size 09, the insert integrates seamlessly into standard cutter bodies and indexable systems. For shop managers this means predictable tool change intervals and easier inventory planning, while engineers benefit from a grade tailored to maintain a stable cutting edge in continuous production environments. Contact Metav Werkzeuge today for tailored application guidance on Walter Tools Tiger‑tec Gold inserts and to discuss the optimal insert selection for stainless steel and superalloy milling Technical Data Article number: SNMX090408-F57-WSM35G-WALTER Designation: SNMX090408-F57 WSM35G Label: Fräswendeschneidplatte SNMX090408-F57 WSM35G Walter Tools Manufacturer: Walter Tools Facts Plate form: Square 90° Corner radius: 0.8 mm Free angle: 0° (negative) Size code: 09 Thickness code: 04 Tolerance class: M Execution: X Special features Grade: WSM35G (coated carbide, Tiger·tec Gold) Chipbreaker: F57 Material suitability: S / M; stainless steel; heat‑resistant superalloys and titanium Typical applications: heavy milling, finishing, interrupted cuts FAQ What materials is this insert suitable for? The SNMX090408-F57 WSM35G insert is designed for stainless steel and heat‑resistant superalloys, reflecting the WSM35G grade and Tiger‑tec Gold coating tailored to difficult‑to‑cut materials. How does the F57 chipbreaker affect machining? The F57 chipbreaker on the SNMX090408-F57 promotes controlled chip formation, improving evacuation and reducing the risk of built‑up edge, which enhances surface finish and process reliability during milling. What does the 0.8 mm corner radius mean for cutting strategy? A 0.8 mm corner radius provides stronger edge support for heavier cuts and interrupted machining, increasing edge life while maintaining acceptable surface quality in serial production. Is this insert compatible with standard 90° square milling cutter bodies? Yes, the square 90° plate form and standard size coding allow the insert to fit conventional cutter bodies designed for SNMX inserts, simplifying tool assembly and indexation. What process benefits can be expected when switching to this grade? Switching to WSM35G with Tiger‑tec Gold coating typically yields improved thermal stability and longer edge life when machining stainless steel and superalloys, resulting in fewer tool changes and higher overall productivity. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX090408-F57 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the versatile P/M/S suitability for reliable, high‑productivity milling. The square 90° geometry with a 0.8 mm corner radius and negative 0° rake ensures predictable chip formation and long tool life — order directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. SNMX090408-F57 WSP45G milling insert (square 90°) by Walter Tools — Tiger·tec Gold, P/M/S capability The SNMX090408-F57 WSP45G is a square 90° milling insert designed for productive face and shoulder milling in steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold PVD coating Coated carbide grade WSP45G Square 90° geometry, 0° negative rake Suitable for steel, stainless steel, superalloys Consistent performance through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G coated carbide grade provides high wear resistance and improved thermal stability. The PVD layer reduces flank wear and supports a stable chip formation even under higher cutting temperatures typical of machining steels and heat‑resistant alloys. For production environments seeking reproducible results, the coated grade is engineered to balance toughness and hardness, which helps reduce unexpected tool changes and keeps cycle times steady. Predictable cutting behaviour from precise geometry The square 90° form with a negative rake 0° delivers a robust cutting edge that resists chipping in interrupted cuts and high feed operations. The corner radius 0.8 mm contributes to edge strength and a consistent cutting footprint, which benefits surface finish and tool life. The insert’s tolerance class M supports repeatable seating and orientation in standard cutter bodies, enabling stable positioning and straightforward tool set‑up. This predictability shortens process optimisation time and reduces scrap rates. Practical advantages for efficient production With a compact size 09 and plate thickness 04, the insert adapts to a wide range of milling bodies and clamping systems. The chipbreaker F57 is designed to control swarf in both continuous and semi‑continuous cutting modes, lowering the risk of recutting and improving evacuation. Compatibility with the ISO groups P / M / S (steel, stainless steel, superalloys/titanium) means a single grade supports multiple applications, reducing tool inventory complexity and improving overall productivity in mixed‑material shops. For application support and cutting data, Metav Werkzeuge can supply tailored recommendations. Contact Metav Werkzeuge for detailed cutting data and application guidance for Walter Tools' Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMX090408-F57-WSP45G-WALTER Article number: SNMX090408-F57 ISO designation: SNMX090408-F57 WSP45G Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Execution: X Numbers / Core technical data Tolerance class: M Free rake: 0° (negative) Corner radius: 0.8 mm Plate size: 09 Plate thickness: 04 Designs / Special features Shape: Square 90° Chipbreaker: F57 Material compatibility: P / M / S (Steel / Stainless steel / Superalloys & Titanium) Coating technology: Tiger·tec Gold (PVD coated carbide) Typical applications: Face and shoulder milling Execution: X FAQ What materials is this insert intended for? The SNMX090408-F57 WSP45G insert is formulated for ISO groups P, M and S — i.e. steel, stainless steel and heat‑resistant superalloys/titanium — leveraging the Tiger·tec Gold coating for thermal and wear resistance. How does the F57 chipbreaker affect machining? The chipbreaker F57 on this Walter Tools insert promotes controlled chip formation and evacuation, which reduces the risk of recutting and contributes to consistent surface quality in both continuous and interrupted milling. What benefit does the negative 0° rake provide? A negative rake of 0° gives a robust cutting edge that resists chipping under heavy loads and interrupted cuts, improving edge life and supporting stable cutting forces during demanding milling operations. What does the designation WSP45G signify? WSP45G is Walter Tools’ coated carbide grade within the Tiger·tec Gold family; it is tailored to offer a balance of toughness and hardness suited to milling a broad range of materials, especially in mixed‑material production runs. What are the key geometric details to consider when selecting a cutter body? Select a cutter body compatible with a square 90° insert, accommodating size 09, thickness 04, corner radius 0.8 mm, and the tolerance class M to ensure correct seating and repeatable orientation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com