SNMM150616-HU3 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, precise HU3 chip control and a robust square 90° geometry for reliable steel turning. Order the insert directly via Metav Werkzeuge or consult the specialists for process-matched recommendations. SNMM150616-HU3 WPP20G indexable turning insert, square 90°, Tiger·tec Gold – Walter Tools The SNMM150616-HU3 WPP20G is a coated carbide turning insert designed for stable, high-productivity steel machining in general turning applications. Tiger·tec Gold coating for extended tool life Optimised HU3 chipbreaker for stable chip control Square 90° form with 1.6 mm corner radius Negative 0° relief for robust turning operations Consistent performance for steel turning with fewer interruptions The insert combines the WPP20G grade of the Tiger·tec Gold series with a dedicated HU3 chipbreaker, producing predictable chip shapes when machining a wide range of steel grades. The substrate and coating pairing—coated carbide—is selected to manage the typical heat and abrasion encountered in steel turning. For production environments this translates into longer intervals between tool changes and fewer interrupted cycles, improving overall equipment efficiency without sacrificing surface quality. Stable chip control and improved process reliability The HU3 chipbreaker is engineered to promote short, controllable chips under conventional feeds, reducing the risk of entanglement and aiding swarf evacuation. Combined with the square 90° geometry, the insert supports secure radial engagement and consistent cutting forces. This stability benefits cycle times and reduces the likelihood of tool-induced part scrap, giving a measurable contribution to process reliability on the shop floor. Robust edge design for predictable wear and longer life A 1.6 mm corner radius and 0° (negative) relief create a tougher cutting edge that resists chipping when taking heavier cuts or encountering interrupted surfaces. The WPP20G grade is a coated hardmetal formulation optimised for steel, balancing wear resistance and toughness. The result is repeatable tool life and a dependable surface finish on turned components, with fewer emergency tool changes during multi-shift production. Practical application and holder compatibility for efficient integration The SNMM150616-HU3 geometry follows common insert standards for ease of integration into existing toolholders and turning systems. The insert’s format suits general-purpose turning holders designed for square 90° inserts, allowing straightforward replacement and setup. In mixed-production shops this compatibility reduces changeover time and simplifies inventory management while maintaining high machining performance. Contact Metav Werkzeuge for direct ordering, technical cutting data and tailored tooling advice for production-relevant applications with Walter Tools inserts Technical data Article number: SNMM150616-HU3-WPP20G-WALTER Designation: SNMM150616-HU3 WPP20G Type: Turning indexable insert Manufacturer: Walter Tools Facts Size: 15 Thickness: 06 Corner radius: 1.6 Relief angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: HU3 Coating/substrate: coated carbide Material application: Steel (P) Execution: M ISO designation: SNMM150616-HU3 WPP20G FAQ Which materials is this insert designed for? The WPP20G grade in the SNMM150616-HU3 insert is formulated for steel (ISO group P) and is optimised to handle the typical heat and chip formation of alloyed and unalloyed steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker promotes short, stable chips at conventional feeds, improving chip evacuation and reducing swarf-related interruptions during turning. What benefit does the 1.6 mm corner radius provide? A 1.6 mm corner radius strengthens the cutting edge, permitting more robust cutting conditions and improved resistance to edge chipping for longer, predictable tool life. Is the insert compatible with standard toolholders for square inserts? Yes. The square 90° format follows common insert standards, allowing use with holders designed for SNMM-style square inserts without special adaptations. What does the negative 0° relief mean in practice? A 0° (negative) relief produces a stable, strong insert seat and edge, suitable for turning tasks where tool rigidity and edge protection are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMM150616-HU7 WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP10G grade combined with the HU7 chipbreaker to achieve consistent chip control and long tool life when machining Stahl; for tailored cutting data or ordering assistance, contact Metav Werkzeuge. SNMM150616-HU7 WPP10G — Square indexable turning insert, Tiger·tec Gold coating (Walter Tools) The SNMM150616-HU7 WPP10G is a square 90° indexable turning insert designed for robust general-purpose turning of Stahl, offering a stable cutting edge and efficient chip formation for production environments. Tiger·tec Gold coated grade WPP10G Square 90° form for stable cutting HU7 chipbreaker for reliable chip control Optimised for machining Stahl Consistent chip control and extended edge life The combination of the HU7 chipbreaker with the Tiger·tec Gold coating provides reliable chip control across a wide range of cutting conditions. The chip geometry is engineered to break and evacuate efficiently, reducing interruptions and the risk of built-up edge. This stability translates into a more predictable tool life and fewer tool changes, which supports steady production cycles and lower process variability. The coated carbide microstructure resists abrasive wear, enabling longer intervals between indexing or replacement and contributing to overall process efficiency. Robust geometry for demanding turning operations The insert’s square 90° form and a 1.6 mm corner radius deliver a secure cutting geometry for both medium and heavy cuts. The negative 0° relief (listed as 0° (negativ)) contributes to a stable cutting edge, improving resistance to edge chipping under interrupted cuts or roughing passes. These geometric choices favour repeatable clamping and precise contact with the toolholder, helping to maintain consistent surface finish and dimensional control even in tougher applications involving interrupted cuts or variable feed rates. Grade and series advantages for Stahl applications The WPP10G grade, part of the Tiger·tec Gold series, is a coated carbide developed specifically for machining Stahl; it balances wear resistance with toughness to handle the thermal and mechanical demands typical for this material group. The grade classification supports a broad application window—suitable for common unalloyed and alloyed steels—so a single grade can cover multiple workpiece types without frequent grade changes. This universality reduces tooling complexity at the machine and simplifies inventory management for production planners. Practical benefits for workshop and production use With a compact 15 mm insert size and the SNMM form factor, the item offers multiple indexing positions for economical use of the insert perimeter, while the tolerance class M and execution M ensure consistent fit in standard toolholders. The combination of geometry, coated grade and chipbreaker reduces cycle-time variability and supports repeatable surface quality, making this insert a reliable choice for operations where throughput and process stability are priorities. For customers seeking concrete cutting data, trial parameters can be provided to accelerate process qualification. Contact Metav Werkzeuge for tailored cutting data, application advice and to arrange supply of Walter Tools SNMM150616-HU7 WPP10G inserts via Metav Werkzeuge; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMM150616-HU7-WPP10G-WALTER Designation: SNMM150616-HU7 WPP10G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert size: 15 Corner radius: 1.6 mm Relief angle: 0° (negativ) Shape: Quadrat 90° Thickness code: 06 Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: HU7 Tolerance class: M Execution: M Material application: Stahl FAQ What materials is this insert intended for? The SNMM150616-HU7 WPP10G insert is specified for machining Stahl according to its grade and coating characteristics; it is optimised for typical steel cutting conditions. How does the HU7 chipbreaker influence operation? The HU7 chipbreaker on the SNMM150616-HU7 WPP10G promotes repeatable chip breakage and controlled evacuation, reducing the likelihood of entanglement and improving process reliability. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and edge stability, extending performance on demanding Stahl turning tasks and permitting a broader application window. Are there recommended clamping or holder types for this insert form? Square 90° SNMM inserts such as the SNMM150616-HU7 WPP10G require compatible indexable insert holders that secure the insert across its seating face and clamp the cutting edge to prevent movement during heavy cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are used for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The described article is an original, factory-new product of the manufacturer Walter Tools.
SNMM150616-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of productive cutting performance and controlled chip formation delivered by the Tiger·tec Gold grade. The robust square geometry and HU7 chipbreaker enable stable turning of steels, lowering tool-change frequency and improving process reliability. Order the SNMM150616-HU7 WPP20G directly via Metav Werkzeuge or consult our specialists for application support. SNMM150616-HU7 WPP20G — SNMM150616-HU7 WPP20G indexable insert for steel, Walter Tools The SNMM150616-HU7 WPP20G is a square 90° coated carbide turning insert designed for efficient ISO P (steel) machining in production environments. Tiger·tec Gold coating for extended life Square 90° geometry for stable turning HU7 chipbreaker for controlled chip formation 1.6 mm corner radius for robust cutting edge Precision and predictable wear for steel machining The combination of the WPP20G grade within the Tiger·tec Gold family and a coated carbide substrate provides a balance of wear resistance and toughness tailored to steel machining. This coating system is engineered to reduce flank wear and resist thermal loading common when cutting unalloyed and alloyed steel. As a result, the insert maintains a consistent cutting edge under typical production feeds and speeds, which translates into more predictable tool life and less unscheduled machine downtime. The specification aligns with ISO group P, making the insert suitable for a wide range of turning tasks from roughing to finishing where stable performance matters. Reliable chip control and enhanced edge strength The dedicated HU7 chipbreaker is optimised for controlled chip formation when machining steel, helping to avoid long stringy chips and supporting safe, automated processes. The insert’s 0° negative rake promotes a strong cutting edge and reduces the tendency for edge chipping under interrupted cuts. With a 1.6 mm corner radius, the geometry improves edge strength and distributes cutting forces, which is particularly beneficial in heavy cut conditions or when occasional workpiece inconsistencies occur. Together these features support sustained material removal rates while protecting the insert and the toolholder interface. Simple integration into stable turning systems The square 90° plate form and a compact size of 15 mm suit a range of standard toolholders and turning applications, offering a good contact face for rigid clamping and repeatable positioning. The tolerance class M and the square geometry provide consistent seating and indexability, reducing setup variation and enabling fast index changes during batch production. This combination of design aspects contributes to productivity gains: fewer tool changes, reliable surface finishes and a lower total cost of machining when the tool life and reproducibility are taken into account. The solution is particularly effective in shops seeking dependable, easy-to-apply inserts that feed into established turning cycles. Contact Metav Werkzeuge for application advice on the SNMM150616-HU7 WPP20G; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder compatibility and cutting data Technical data Article number: SNMM150616-HU7-WPP20G-WALTER SKU / Label: Drehwendeschneidplatte SNMM150616-HU7 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Execution / Tolerance: M Facts Corner radius: 1.6 mm Plate size: 15 mm Rake angle: 0° (negative) Plate form: Square 90° Chipbreaker: HU7 Thickness: 06 Special features Coated carbide grade WPP20G (Tiger·tec Gold) Application group: ISO P (steel) Robust edge for interrupted cuts Designed for stable chip control and high repeatability FAQ What materials is this insert intended for? The SNMM150616-HU7 WPP20G is formulated for ISO P materials and is recommended for turning various unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and thermal stability, extending insert life during continuous and heavy-duty turning operations. What is the purpose of the HU7 chipbreaker? The HU7 chipbreaker on the insert promotes controlled chip breaking and evacuation when machining steel, improving process safety and surface finish consistency. Can this insert handle interrupted cuts? Yes. The 0° negative rake and 1.6 mm corner radius increase edge robustness, making the insert suitable for applications with intermittent cuts. Which toolholders are compatible with this insert form? Square 90° inserts such as the SNMM150616-HU7 WPP20G are compatible with standard clamping toolholders designed for square indexable plates of the specified size. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMM150624-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust HU3 chipbreaker and a compact square form for efficient, repeatable Stahl turning; order directly via Metav Werkzeuge or consult our team for application guidance. SNMM150624-HU3 WPP20G square 90° turning insert, Tiger·tec Gold coating – Walter Tools The SNMM150624-HU3 WPP20G is a square, negative 0° turning insert optimised for high-productivity Stahl machining with a HU3 chipbreaker for reliable chip control. Tiger·tec Gold coating for extended tool life Optimised HU3 chipbreaker for Stahl machining Square 90° form with 2.4 mm corner radius Increased productivity for Stahl turning The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a measurable improvement in cutting performance and tool life when machining Stahl. The specialised coating reduces flank and crater wear, which enables stable cutting at elevated speeds and feeds. This results in fewer index changes and longer uninterrupted production runs, improving overall process economy. Selection of a coated carbide grade like this one is aimed at balancing wear resistance with fracture toughness for typical turning operations in unalloyed and alloyed Stahl. Reliable chip control and predictable surface results Thanks to the HU3 chipbreaker geometry and the negative 0° rake design, the insert provides consistent chip formation under varying cutting conditions. The square 90° form and 2.4 mm corner radius offer a robust cutting edge that resists edge chipping and supports stable tool life, while maintaining a good surface finish on turned components. For operations where interrupted cuts or shoulder work occur, the combination of edge strength and chip control helps keep machining predictable and reduces rework. Clear specification and practical application guidance This indexable insert is supplied in the SNMM ISO configuration and is manufactured as a coated carbide grade suitable for the ISO P group (Stahl). The compact dimensions (15 mm size, plate thickness coded as 06) make it suitable for a wide range of lathe toolholders designed for square 90° inserts. The grade is designed to offer a balanced performance across tenacious and general-purpose turning tasks, making it a practical choice for mixed-production environments requiring reliable repeatability. For detailed toolholder pairing or suggested cutting data, consult Metav Werkzeuge’s technical team. Contact Metav Werkzeuge for application advice or to procure genuine Walter Tools Tiger·tec Gold inserts such as the SNMM150624-HU3 WPP20G; Metav Werkzeuge will assist with selection and supply. Technical data SKU: SNMM150624-HU3-WPP20G-WALTER Designation: SNMM150624-HU3 WPP20G Type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Size: 15 Corner radius: 2.4 mm Clearance / rake: 0° (negative) Plate form: Quadrat 90° Plate thickness code: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: HU3 Execution: M Application group: P (Stahl) Coated carbide grade FAQ What materials is this insert intended for? The SNMM150624-HU3 WPP20G is specified for the ISO P group and is suitable for machining Stahl grades commonly encountered in general turning. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this insert promotes controlled chip formation and evacuation, which improves surface finish consistency and reduces the risk of chip-related interruptions when turning Stahl. Is this insert available in other corner radii or forms? The presented SKU is a square 90° insert with a 2.4 mm corner radius; Walter Tools offers a range of insert geometries and radii—consult Metav Werkzeuge for alternative configurations. What are the practical benefits of the Tiger·tec Gold coating? The Tiger·tec Gold coating on this WPP20G grade increases wear resistance and thermal stability, extending tool life during higher-speed Stahl operations and enhancing process reliability. Which toolholders are compatible with the SNMM150624-HU3 WPP20G? Compatibility depends on the lathe toolholder's insert seat for SNMM-format square 90° plates; Metav Werkzeuge can advise on suitable holders for this insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mark names and protected product names are used solely for explanation. The offered item is an original, factory-new product of the manufacturer.
SNMM150624-HU7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, robust edge strength, and consistent chip control for reliable turning of steel components; order the SNMM150624-HU7 WPP10G insert directly via Metav Werkzeuge or ask our consultants if needed. SNMM150624-HU7 WPP10G Drehwendeschneidplatte by Walter Tools — Tiger·tec Gold, for steel (ISO P) The SNMM150624-HU7 WPP10G is a square 90° indexable insert designed for versatile steel turning applications, providing a wear-resistant coated grade and a robust chip control geometry. Tiger·tec Gold coated carbide grade Optimised for ISO P (steel) applications Square 90° insert, 15 mm size 0° negative rake with 2.4 mm corner radius Increased throughput with a wear-resistant grade The Tiger·tec Gold coated carbide in this grade delivers a balance of wear resistance and toughness that maintains cutting-edge integrity during serial production. The WPP10G specification is tuned for machining steel (ISO P), which means heat and typical steel chip formation are accounted for in the coating and substrate combination. This results in longer tool life and fewer interruptions for index changes, helping to keep cycle times predictable and throughput high. Stable chip control and dependable edge strength The HU7 chipbreaker geometry provides controlled chip formation for continuous and medium-depth turning, reducing the risk of snarled chips and improving process stability. Combined with the 0° negative rake, the insert offers a robust cutting edge that tolerates interrupted cuts and varying stock conditions. The practical outcome is consistent surface quality and reduced rework, supporting tighter production tolerances on turned components. Easy integration and repeatable set-up for series production The square 90° form and 15 mm size make the insert straightforward to integrate into standard turning toolholders, while the 2.4 mm corner radius contributes to a compromise between edge strength and finish. The tolerance class M ensures a predictable seating fit and repeatable results when indexed. For users introducing new grades into production, this combination simplifies parameter transfer and shortens ramp-up time. Application advice and process confidence For machining unalloyed and alloyed steels, the grade is a practical choice where a mix of wear resistance and toughness is required. The coated carbide technology reduces flank wear and contributes to stable cutting performance across typical steel operations. If guidance is needed on feeds and speeds or selecting the matching toolholder, technical consultation is available to ensure the insert matches the machining strategy and workpiece material. For high-productivity turning with a wear-resistant Tiger·tec Gold grade, choose the Walter Tools SNMM150624-HU7 WPP10G insert — contact Metav Werkzeuge for specification support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMM150624-HU7-WPP10G-WALTER Article designation: SNMM150624-HU7 ISO designation: SNMM150624-HU7 WPP10G Brand: Walter Tools Series: Tiger·tec Gold Facts Size: 15 mm Corner radius: 2.4 mm Free cutting angle: 0° (negative) Shape: Square 90° Thickness code: 06 Tolerance class: M Special features Grade: WPP10G Chipbreaker: HU7 Coated carbide (Tiger·tec Gold technology) Material application: Steel (ISO P) Execution: M FAQ What materials is this insert suitable for? The SNMM150624-HU7 WPP10G insert is specified for steel applications and is designed for machining unalloyed and alloyed steels in the ISO P group. How does the Tiger·tec Gold technology benefit machining performance? Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and thermal stability, improving tool life and process reliability when turning steel parts. What advantages does the HU7 chipbreaker provide? The HU7 chipbreaker on this indexable insert ensures controlled chip formation for continuous and medium-depth cuts, which supports stable cutting conditions and improved surface finish. Why is the 0° negative rake important for certain turning tasks? A 0° negative rake creates a stronger cutting edge that tolerates interruptions and variable feed conditions, making the insert suitable for tougher or less predictable turning operations. Which insert dimensions and form are included for fixturing and toolholder selection? The insert is a square 90° form, 15 mm size with a 2.4 mm corner radius and thickness code 06, offering straightforward compatibility with standard toolholders for series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only and do not indicate any association between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
SNMM150624-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a robust square 90° geometry and a precisely defined 2.4 mm corner radius for dependable turning of steel; order the SNMM150624-HU7 WPP20G directly via Metav Werkzeuge or ask our consultants for application support. SNMM150624-HU7 WPP20G indexable turning insert, optimised for steel with Tiger·tec Gold coating — Walter Tools SNMM150624-HU7 WPP20G is a square indexable insert designed for turning applications in steel; the insert combines a coated carbide grade from the Tiger·tec Gold series with a HU7 chipbreaker for stable chip control Tiger·tec Gold coated carbide grade WPP20G Designed for machining steel (ISO P) Square 90° insert with 2.4 mm corner radius Negative 0° rake for robust cutting performance High-performance grade for reliable steel turning The Tiger·tec Gold grade WPP20G delivers a balanced combination of wear resistance and toughness that is specifically tuned for steel (ISO P). The coated carbide composition provides improved heat resistance and a stable cutting edge, which supports consistent machining results across a broad range of unalloyed and alloyed steels. The HU7 chipbreaker is engineered for predictable chip formation, reducing the risk of rework and contributing to steady cycle times in series production. Durable coating and geometry that extend tool life A coated carbide grade in the Tiger·tec Gold family offers measurable advantages in edge stability and abrasion resistance under typical turning conditions. The HU7 chipbreaker aids in controlled chip evacuation while the negative 0° rake increases edge strength for interrupted cuts or heavy cross-sections. Together with the 2.4 mm corner radius, the geometry reduces the likelihood of premature chipping and supports longer cutting intervals, which lowers tool change frequency and improves overall process economy. Precise form and tolerance for predictable integration The insert’s square 90° form and the dimensional designation (size 15, thickness 06, tolerance class M) make it straightforward to select compatible toolholders and to standardise tooling across multiple machines. The consistent fit and repeatable edge location enable stable set-ups and predictable part quality, which simplifies process planning in job shops and production lines alike. For manufacturers seeking reliable performance in turning operations, this indexable insert integrates easily into established machining strategies. Contact Metav Werkzeuge for tailored advice on toolholder compatibility or application parameters and benefit from the Walter Tools Tiger·tec Gold technology in steel turning Technical Data SKU: SNMM150624-HU7-WPP20G-WALTER Article designation: SNMM150624-HU7 WPP20G Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Facts Grade / Coating: WPP20G / Tiger·tec Gold Geometry: Square 90° Corner radius: 2.4 mm Rake angle: 0° (negative) Chipbreaker: HU7 Plate size: 15 Plate thickness: 06 Tolerance class: M Material group: P (steel) Special features Coated carbide (Walter Tiger·tec Gold technology) Designed for machining steel (ISO P) Stable chip formation and reliable edge life Optimised for productive turning operations Suitable for unalloyed and alloyed steels FAQ Which materials is this insert intended for? The SNMM150624-HU7 WPP20G insert is specified for steel (ISO P), covering unalloyed and alloyed steels according to the grade’s design. What does the HU7 chipbreaker deliver in practice? The HU7 chipbreaker on the SNMM150624-HU7 promotes controlled chip formation and reliable evacuation, supporting steady cutting forces and reduced risk of chip-related interruptions. What are the key geometry details and how do they affect use? The insert features a square 90° shape, 2.4 mm corner radius, size 15 and thickness 06 with tolerance class M, which together provide robust edge strength and simple integration into compatible holders. Can this grade be used for stainless or hardened steels? The WPP20G grade is optimised for steel (ISO P). No data is provided for stainless or hardened steels, so selection for those materials should be based on dedicated grades. Which toolholders accept this insert form? Toolholders designed for SNMM form inserts accept the SNMM150624-HU7 WPP20G; verify holder compatibility with the insert’s square 90° geometry and size 15 specification Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
SNMM190612-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP10G grade for dependable wear resistance and stable chip control; the 0° negative rake combined with a 1.2 mm corner radius delivers edge strength for demanding steel turning. Order the insert directly via Metav Werkzeuge or consult our technical team for application support. SNMM190612-HU3 WPP10G indexable turning insert — Walter Tools, Tiger‑tec Gold A SNMM190612-HU3 WPP10G indexable turning insert designed for general steel machining, featuring a 90° square geometry and the Tiger‑tec Gold coated carbide grade for enhanced productivity. Tiger‑tec Gold coated for wear resistance Designed for steel machining (ISO P) 90° square shape for robust turning 0° negative rake, 1.2 mm corner radius Longer tool life through advanced coating and grade selection The combination of the Tiger‑tec Gold coating with the WPP10G carbide grade provides a balance of wear resistance and toughness optimised for ISO P materials, i.e. steels. Coating technology reduces flank wear and thermal softening in continuous and intermittent cuts, which translates into longer tool life and fewer insert changes. For production environments this means greater uptime and lower overall tooling cost per component while maintaining consistent surface quality. Robust geometry for stable cutting and higher process security A 90° square insert geometry with a 1.2 mm corner radius and 0° negative rake delivers a mechanically strong cutting edge able to withstand heavier depths of cut and slight interruptions. The larger corner radius improves edge strength and contributes to improved component roundness and surface finish in roughing and finishing passes. In practical terms, the geometry supports reliable chip formation and reduces the risk of edge chipping during interrupted cuts or hard spots in steel workpieces. Chip control and practical application guidance for steel turning The HU3 chipbreaker is configured to promote predictable chip breaking in a wide range of steel grades, aiding machine safety and workpiece handling. With a plate size of 19 mm and a nominal thickness of 6 mm, the insert supports stable clamping and rigidity in standard toolholders. The SNMM190612‑HU3 insert is suitable for general turning tasks across unalloyed and alloyed steels; for specific process parameters or unusual steel grades, Metav Werkzeuge’s technical advisers can provide feed, speed and lead recommendations to optimise cycle times and surface quality. The design emphasises reliable, repeatable performance in demanding shop-floor conditions. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Gold inserts and rapid delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMM190612-HU3-WPP10G-WALTER Designation: SNMM190612-HU3 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Facts Plate size: 19 mm Thickness: 6 mm Corner radius: 1.2 mm Free rake angle: 0° (negative) Plate form: 90° square Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: HU3 Application: Steel (ISO P) Tolerance class: M Execution: M FAQ What materials is this insert intended for? The SNMM190612‑HU3 WPP10G insert is formulated for machining steels (ISO P); the WPP10G grade and Tiger‑tec Gold coating are optimised for the thermal and chip‑forming characteristics of steel. What does the 0° negative rake mean for performance? A 0° negative rake increases edge strength and resistance to shock, which helps the insert maintain form under heavy cuts and intermittent turning conditions. How does the 1.2 mm corner radius affect surface finish? A 1.2 mm radius strengthens the cutting edge and improves roundness; however, smaller radii may be chosen where very fine surface finish or tight corner radii are required. Is the HU3 chipbreaker suitable for roughing and finishing? The HU3 chipbreaker is designed to provide reliable chip control across a range of feeds and depths, making it appropriate for many roughing and semi‑finishing operations on steel. Which series and brand does this insert belong to? This indexable insert is part of the Tiger‑tec Gold series by Walter Tools and bears the designation SNMM190612‑HU3 WPP10G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SNMM190612-HU3 WPP20G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, a dedicated HU3 chipbreaker and a stable square geometry to secure reliable, economical machining of Stahl; order the SNMM190612-HU3 WPP20G directly via Metav Werkzeuge or consult our specialists for application advice. SNMM190612-HU3 WPP20G turning insert — Tiger·tec Gold, HU3 chipbreaker (Walter Tools) The SNMM190612-HU3 WPP20G is a square 90° indexable turning insert engineered for versatile Stahl turning applications, combining a Tiger·tec Gold coated carbide grade with an HU3 chipbreaker for controlled chip formation. Tiger·tec Gold coated grade WPP20G Optimised HU3 chipbreaker for stable chips Square 90° insert with 1.2 mm corner radius Designed for Stahl machining (ISO group P) Consistent material removal with Tiger·tec Gold technology The coated carbide WPP20G grade from the Tiger·tec Gold series is formulated for a broad range of Stahl machining tasks. Its surface technology reduces flank and crater wear, which translates into longer tool life and fewer interruptions in production. The HU3 chipbreaker is shaped to promote predictable chip segmentation when turning typical unalloyed and alloyed Stahl, improving evacuation and reducing the risk of built-up edge. For production environments seeking throughput and low tool-change frequency, this insert offers a measurable performance advantage thanks to its coating and chip control features. Geometry tuned for repeatable, high-quality finishes A square 90° cutting geometry paired with a 1.2 mm corner radius provides a robust cutting edge that resists edge chipping while delivering consistent surface finish and dimensional stability. The insert’s negative rake of 0° (negative) supports stable engagement under heavier cuts and helps maintain the cutting edge when machining tougher Stahl grades. The tolerance class M ensures reproducible seating in toolholders, enabling repeatable positioning and predictable component quality. These geometric properties are especially beneficial where part-to-part consistency and reduced rework are priorities. Practical application and process integration The SNMM190612-HU3 WPP20G insert is optimised for general turning operations within the ISO P group and performs well across a spectrum of cutting speeds and feeds when matched with appropriate coolant and tooling. Its indexable design allows economical use of all cutting edges, reducing tooling cost per part. For machining strategies requiring stable chip control and long tool life—such as medium-duty roughing and finishing of Stahl—this insert offers balance between wear resistance and toughness. For exact cutting data and holder compatibility, coordinate with Metav Werkzeuge to select the ideal clamping solution and cutting parameters. Contact Metav Werkzeuge to specify the SNMM190612-HU3 WPP20G for intended Stahl applications and to request machining data, availability and delivery coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMM190612-HU3-WPP20G-WALTER SKU: SNMM190612-HU3-WPP20G-WALTER Designation: SNMM190612-HU3 WPP20G Product type: turning insert Manufacturer: Walter Tools Facts Size: 19 Corner radius: 1.2 mm Thickness: 06 Rake angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP20G Chipbreaker: HU3 Material application: Stahl (ISO group P) Series: Tiger·tec Gold Execution: M FAQ What materials is this insert suited for? The SNMM190612-HU3 WPP20G is designed primarily for machining Stahl and is optimised for applications classified under ISO group P. How does the HU3 chipbreaker improve performance? The HU3 chipbreaker on this Tiger·tec Gold insert promotes stable chip formation and evacuation, reducing the chance of entanglement and improving surface quality during Stahl turning. Can this insert be used for finishing passes? Yes, the square 90° geometry with a 1.2 mm corner radius provides a balance of edge strength and finish capability suitable for light finishing as well as general machining of Stahl. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMM190612-HU3 WPP30G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating, an HU3 chipbreaker optimised for steel and a robust negative 0° rake for secure engagement; order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. SNMM190612-HU3 WPP30G turning insert — Tiger‑tec Gold coating, for steel (Walter Tools) SNMM190612-HU3 WPP30G is a square 90° turning insert designed for productive steel machining with a robust chipformer and coated carbide technology Tiger‑tec Gold coating for extended tool life Optimised HU3 chipbreaker for steel machining Square 90° form with 1.2 mm corner radius Negative 0° rake for stable, heavy cuts High-performance coating and reliable flank life The coated carbide grade from the Tiger‑tec Gold family combines hardness and thermal stability to extend cutting tool life when machining steel. The WPP30G substrate is designed to balance wear resistance and toughness: this means fewer tool changes and more consistent cycle times. The term "coating" here refers to a multi-layer CVD/PVD-style treatment that reduces abrasion and protects the cutting edge against the temperatures typical of steel turning processes. For operations where repeatability and uptime are priorities, the coating contributes directly to process economy and predictable tool change intervals. Geometry engineered for consistent chip control and surface quality The square 90° plate geometry, paired with the HU3 chipbreaker, is tailored to produce short, controllable chips during conventional steel turning. A 1.2 mm corner radius increases edge strength and reduces the risk of premature chipping when engaging material, while the negative 0° rake provides a robust cutting edge for interrupted cuts or heavy engagement. In practical terms, these geometric choices translate to improved workpiece finish and fewer rejects: the chipformer directs swarf away from the cutting zone, and the larger corner radius enhances edge robustness under intermittent loading. Process benefits and shop-floor integration Adopting this insert in a production setting supports higher reliability and predictable tool life, which are key to lean machining. The insert’s specification (square 90° form, WPP30G grade, HU3 chipbreaker) simplifies tooling selection for turning centres focused on unalloyed and alloyed steels. Where cycle times and consistency are monitored, the insert’s balanced wear behaviour reduces fluctuation in dimensional drift. For engineers planning feeds and speeds, the negative rake and sturdy edge permit conservative cutting strategies that nonetheless maintain productivity under varying cutting conditions. Contact Metav Werkzeuge today to specify Walter Tools Tiger‑tec Gold inserts for optimised steel turning and to receive tailored application support from the Metav Werkzeuge technical team Technical Data Article number: SNMM190612-HU3-WPP30G-WALTER Product name: SNMM190612-HU3 WPP30G Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Series: Tiger‑tec Gold Facts Plate form: Square 90° Corner radius: 1.2 mm Plate size: 19 Thickness code: 06 Clearance/rake: 0° (negative) Special features Grade: WPP30G (coated carbide) Chipbreaker: HU3 Application group: P (steel) Tolerance class: M Execution: M ISO designation: SNMM190612-HU3 WPP30G FAQ What materials is this insert suitable for? The SNMM190612-HU3 WPP30G insert is specified for the ISO material group P and is optimised for machining various steels, including unalloyed and alloyed steels. How does the HU3 chipbreaker affect machining performance? The HU3 chipbreaker on the SNMM190612-HU3 WPP30G steers chips into short, manageable segments during steel turning, improving chip evacuation and surface quality while lowering the risk of chip entanglement. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, extending tool life and supporting consistent process results in steel turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter AG and part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
SNMM190612-HU5 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver wear resistance, a robust HU5 chipbreaker and the square 90° geometry for reliable machining of stainless steel; order the SNMM190612-HU5 WMP20S directly via Metav Werkzeuge or ask our consultants for application advice. SNMM190612-HU5 WMP20S indexable turning insert (square 90°, for stainless steel) by Walter Tools SNMM190612-HU5 WMP20S is a square 90° indexable turning insert designed for dependable metalcutting of stainless steels in medium to robust conditions, combining coated carbide performance with controlled chip formation. Tiger‑tec Silver coating for improved wear resistance Optimised chip control with HU5 chipbreaker Square 90° form, 1.2 mm corner radius Negative 0° rake for robust cutting stability Consistent performance on stainless steel for predictable results The coated carbide grade WMP20S in the Tiger‑tec Silver family delivers a balance between wear resistance and toughness that is tailored to the demands of stainless steel. The combination of the HU5 chipbreaker and the insert’s geometry supports stable chip formation under higher heat and adhesive tendencies typical of these alloys. This results in fewer unexpected interruptions, improved process reliability and a clearer basis for selecting cutting conditions in production. Increased productivity through reduced tool changes and reliable edges A square 90° insert form provides a strong cutting edge and multiple indexed corners, increasing usable edge life before replacement. The 1.2 mm corner radius absorbs cutting forces and reduces edge chipping in interrupted or roughing operations, while the 0° (negative) rake delivers a robust approach to heavy feeds. Together these characteristics reduce downtime and contribute directly to a better cost-per-part ratio in batch and continuous turning operations. Easier machining setup and repeatable quality The insert’s consistent geometry and the Tiger‑tec Silver coating make process planning more straightforward: the WMP20S grade gives predictable wear patterns and improved surface finish stability without complex parameter experimentation. For engineers and shop planners, this means fewer trial cuts, clearer specifications for tooling lists and greater confidence in repeatable surface quality across series production. The insert is especially suited for applications where secure chip control and edge stability are priorities. For robust turning of stainless steel with Walter Tools’ Tiger‑tec Silver WMP20S, contact Metav Werkzeuge for tailored recommendations and fast supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: SNMM190612-HU5-WMP20S-WALTER Label: Drehwendeschneidplatte SNMM190612-HU5 WMP20S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Core dimensions Plate size: 19 mm Corner radius: 1.2 mm Plate thickness: 06 Free angle: 0° (negative) Special features Coating technology: Tiger‑tec Silver Grade: WMP20S Chipbreaker: HU5 Geometry: Square 90° Application: Suitable for stainless steel (M) Tolerance class: M Execution: M FAQ What materials is the insert suitable for? The SNMM190612-HU5 WMP20S is designed primarily for stainless steel applications (ISO group M) and supports medium to robust cutting conditions. How does the HU5 chipbreaker help in production? The HU5 chipbreaker provides controlled chip formation for sticky, heat-prone materials, improving evacuation and reducing the risk of built-up edge when machining stainless steel. What benefit does the 1.2 mm corner radius offer? A 1.2 mm corner radius increases edge strength and dampens cutting shocks, helping to avoid premature chipping during interrupted cuts or heavier feed rates. Is the negative 0° rake suitable for roughing operations? Yes, the 0° (negative) rake delivers a robust edge orientation that is advantageous for aggressive feeds and interrupted cutting, offering greater cutting stability. How many indexed corners does the square insert provide? The square 90° form offers multiple usable corners per insert, extending overall indexable edge life and contributing to cost-effective tool utilisation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMM190612-HU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, Tiger·tec Gold wear resistance and precise chip control for efficient steel turning. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored machining advice. SNMM190612-HU5 WPP20G turning insert — square 90° geometry, Tiger·tec Gold grade | Walter Tools SNMM190612-HU5 WPP20G is a square-indexable turning insert engineered for precision turning of steel components; designed for stable cutting performance in ISO P applications. Tiger·tec Gold coated carbide grade WPP20G Designed for steel (ISO P) machining Square 90° geometry for positive cutting HU5 chipbreaker for reliable chip control Consistent cutting performance for steel components The WPP20G grade within the Tiger·tec Gold family combines a coated carbide construction with a formulation optimised for machining steel (ISO P). This results in stable flank wear behaviour and consistent component tolerances over longer tool life, which supports predictable cycle times and reduced tool change frequency. The square 90° geometry paired with a corner radius of 1.2 mm delivers a balance between edge strength and surface finish, making the insert well suited for medium to heavy finishing passes and interrupted cuts where reliability matters. Controlled chips and improved edge stability The HU5 chipbreaker is engineered for precise chip formation when turning unalloyed and alloyed steels. By promoting short, controllable chip segments, the chipbreaker reduces the risk of entanglement and helps maintain steady cutting forces. The insert’s 0° relief angle (negative) provides a robust cutting edge for demanding conditions, while the Tiger·tec Gold coating minimises adhesion and thermal wear. For operators with limited experience of coating technologies: the coating is a thin, engineered layer that reduces friction and delays wear mechanisms, directly extending the useful life of the carbide substrate. Practical integration into workshop workflows Installation and handling are straightforward: the square 90° form fits common toolholders designed for SNMM-type inserts, and the standardised designation simplifies tool management. The compact 19 mm size and plate thickness 06 suit many common lathe setups, while the tolerance class M ensures consistent interchangeability across inserts from the same batch. When selecting cutting data, prioritise stable clamping and appropriate coolant strategy for steel to exploit the insert’s wear resistance; for further optimisation and cutting-parameter recommendations, consult Metav Werkzeuge’s application support. Contact Metav Werkzeuge for a personalised tooling recommendation or to request technical details for Walter Tools turning inserts — quick advice and tailored solutions are available from Metav Werkzeuge. Technical data Article number: SNMM190612-HU5-WPP20G-WALTER Designation: SNMM190612-HU5 WPP20G Product type: Turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Insert size: 19 mm Thickness: 06 Relief angle: 0° (negative) Tolerance class: M Chipbreaker: HU5 Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Geometry: Square 90° Material application: Steel (ISO P) Execution: M FAQ Which materials is this insert suitable for? The SNMM190612-HU5 WPP20G insert from Walter Tools is specified for steel machining (ISO P), including unalloyed and alloyed steels as listed in the grade guidance. What benefit does the Tiger·tec Gold technology provide? Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and heat management, extending edge life and maintaining consistent cutting performance during steel turning with the SNMM190612-HU5 insert. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker promotes short, manageable chips and stabilises chip flow, which improves surface finish and reduces the risk of chip-related interruptions when turning steel with the SNMM190612-HU5 WPP20G insert. Is the square 90° geometry suitable for heavy cuts? Yes, the square 90° form with a 1.2 mm corner radius gives edge strength and versatility for medium to heavier finishing passes, offering a compromise between robustness and surface quality. What does the tolerance class M mean for toolset-up? Tolerance class M indicates a medium tolerance band for the insert dimensions, ensuring reliable interchangeability and consistent seating in compatible SNMM toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanation and identification only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
SNMM190612-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Take advantage of a combination of Tiger‑tec Silver coating and the WSM30S grade for stable cutting edges in demanding materials; the HU5 chipbreaker and 1.2 mm corner radius support consistent chip control and long tool life. Order genuine Walter Tools inserts conveniently via Metav Werkzeuge or request advice from our consultants for process matching. SNMM190612-HU5 WSM30S — Indexable turning insert, Tiger‑tec Silver (Walter Tools) SNMM190612-HU5 WSM30S is an indexable turning insert engineered for heavy‑duty machining of rostfreier Stahl and heat‑resistant superalloys with reliable chip control Tiger‑tec Silver coated carbide grade WSM30S Optimised HU5 chipbreaker for stable chips Square 90° shape with 1.2 mm corner radius Suitable for rostfreier Stahl and superalloys High‑performance grade for demanding materials The WSM30S grade, part of the Tiger‑tec Silver series, is a coated cemented carbide designed to cope with the challenges of machining rostfreier Stahl and heat‑resistant superalloys. This material combination tends to form long, adhesive chips and generates significant thermal loads; the specialised coating reduces flank wear and improves heat resistance, resulting in a more stable cutting edge and extended tool life. Engineers benefit from predictable performance under elevated temperatures and tougher cutting conditions. Geometry engineered for process reliability A square 90° insert geometry provides robust support for interrupted cuts and heavy radial engagement. The 1.2 mm corner radius increases edge strength and distributes cutting stresses, while the HU5 chipbreaker promotes controlled chip formation to prevent build‑up on the cutting edge. The 0° negative rake offers additional edge security in roughing operations, enabling durable performance in applications where tool robustness is critical rather than maximum shear efficiency. Coating and chip control for productive machining The coating system of the Tiger‑tec Silver family improves abrasion resistance and reduces chemical affinity with workpiece material, which is particularly useful when processing nickel‑based alloys and rostfreier Stahl. Combined with the HU5 chip management geometry, this insert supports continuous production by lowering the frequency of tool changes and reducing unplanned downtime. The result is a cost‑effective solution for shops seeking stable cycle times and repeatable surface quality. Practical application and process integration Tolerance class M and the universal S / M material designation indicate suitability for workshops focused on rostfreier Stahl and superalloys rather than general‑purpose steels. The insert’s design fits conventional turning tool holders for square inserts and is intended for operations requiring toughness and edge life rather than ultra‑fine finishing. For assistance in selecting the correct insert geometry and holder combination for a specific turning cell, Metav Werkzeuge can offer technical guidance and machining recommendations. For reliable machining of rostfreier Stahl and superalloys with Walter Tools’ Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored advice and to secure original SNMM190612‑HU5 WSM30S components Technical data SKU: SNMM190612-HU5-WSM30S-WALTER Article name: SNMM190612-HU5 WSM30S Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WSM30S Numeric data Corner radius: 1.2 mm Insert size: 19 mm Relief angle: 0° (negative) Thickness code: 06 Special features HU5 chipbreaker Square 90° insert form Coated cemented carbide (Tiger‑tec Silver) Suitable for rostfreier Stahl (M) and superalloys (S) Tolerance class M Execution: M FAQ What materials is this insert best suited for? The SNMM190612‑HU5 WSM30S insert is specified for rostfreier Stahl and heat‑resistant superalloys, where the WSM30S grade and Tiger‑tec Silver coating improve heat resistance and cutting edge stability. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on this Walter Tools insert promotes controlled chip breakage and evacuates chips reliably, reducing the risk of built‑up edge and improving process stability for longer tool life. What does the 0° (negative) relief angle mean in practice? A 0° negative relief angle increases edge strength and suitability for heavy interrupted cuts; it trades some shear efficiency for improved robustness in demanding turning operations. Is the SNMM190612‑HU5 compatible with standard square insert toolholders? Yes, the square 90° form and standard dimensions make the insert compatible with common toolholders designed for square indexable turning inserts. How does the Tiger‑tec Silver coating benefit production? Tiger‑tec Silver enhances abrasion resistance and reduces chemical affinity with the workpiece, which helps maintain a stable cutting edge and reduces flank wear when machining rostfreier Stahl and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMM190612-HU7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating for long tool life and the HU7 chipbreaker for consistent chip control to improve process reliability and productivity; order through Metav Werkzeuge or consult our specialists for precise application advice. SNMM190612-HU7 WPP20G turning indexable insert, Tiger‑tec Gold for steel machining — Walter Tools SNMM190612-HU7 WPP20G is a square turning indexable insert designed for medium to high productivity steel turning, offering a durable coated grade and dependable chip control. Tiger‑tec Gold coating for extended tool life HU7 chipbreaker for reliable chip control Square 90° form with 1.2 mm corner radius Designed for steel machining (ISO group P) Increased productivity through a wear-resistant grade The WPP20G grade from the Tiger‑tec Gold family provides a balanced combination of wear resistance and toughness suited to the thermal and mechanical demands of steel turning. As a coated carbide grade optimised for ISO group P, this insert helps maintain cutting-edge stability under continuous cutting loads, resulting in longer tool life and fewer indexings. The result is a measurable increase in process uptime and reduced tool inventory turnover, which supports cost-efficient production and reliable batch runs. Predictable chip behaviour and improved surface quality The HU7 chipbreaker is engineered to produce controlled, segmented chips when machining common steels, reducing the risk of entanglement and improving evacuation from the cutting zone. Controlled chip formation contributes directly to consistent surface finish and reduces secondary handling time. In practical terms, stable chips mean fewer interruptions for cleaning, less toolholder wear from chip re-cutting, and more predictable cycle times on CNC lathes—advantages that translate into smoother operations on shop floors. Robust geometry for repeatable results The insert’s square 90° geometry with a 1.2 mm corner radius provides a stable cutting edge for general turning and light shoulder work, combining rigidity with acceptable strength at the cutting tip. The negative 0° relief angle supports heavy cut entry and vibration resistance in interrupted cuts, making the insert suitable for demanding turning tasks where edge support and repeatability are essential. Such geometry choices improve positional accuracy and reproducibility across multiple parts, which is particularly valuable for batch production and quality-controlled environments. Application range and economic value Specified for machining steel (ISO group P), this turning insert is aimed at workshops and production environments focusing on universal steel applications where a compromise between wear resistance and toughness is required. The combination of grade and chipbreaker reduces the likelihood of premature edge failure and helps to lower overall machining costs by extending index life and maintaining surface integrity. For operations seeking consistent machining results from a trusted brand, the insert provides a pragmatic balance of performance, availability and process security. Contact Metav Werkzeuge for tailored application guidance on Walter Tools SNMM190612-HU7 WPP20G turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMM190612-HU7-WPP20G-WALTER Name: Drehwendeschneidplatte SNMM190612-HU7 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Plate size: 19 Corner radius: 1.2 mm Plate form: square 90° Relief angle: 0° (negative) Thickness code: 06 Special features Chipbreaker: HU7 Coating: Tiger‑tec Gold (coated carbide) Material suitability: Steel (ISO group P) Tolerance class: M Execution: M FAQ What materials is this insert recommended for? The insert is specified for machining steel (ISO group P); the WPP20G grade is optimised for the typical heat and chip formation encountered in steel turning. How does the HU7 chipbreaker improve machining? The HU7 chipbreaker promotes segmented chip formation and reliable evacuation, which helps maintain surface finish and reduces interruptions caused by uncontrolled chips. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances wear resistance and edge stability, extending index life and supporting higher productivity in continuous turning operations. Which geometrical features aid stability in heavy cuts? The square 90° form combined with a 1.2 mm corner radius and a negative 0° relief angle gives solid edge support and resistance to vibration during heavier or interrupted cuts. Is this insert suitable for shoulder turning and finishing passes? The insert’s geometry offers a balance between strength and precision that is suitable for general turning and light shoulder work; for specific finish requirements, tool and parameter selection should be matched to component tolerances. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes and do not imply any affiliation with or endorsement by our company. The offered item is an original, factory‑new product from the manufacturer.
SNMM190612-HU7 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP30G grade for steady tool life and consistent chip control; the square 90° geometry with a 1.2 mm corner radius ensures reliable strength in demanding steel turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. SNMM190612-HU7 WPP30G turning insert — square 90° insert, Tiger‑tec Gold, for steel, Walter Tools The SNMM190612-HU7 WPP30G is a coated carbide turning insert designed for robust steel machining with a square 90° form and a specialised HU7 chipbreaker for predictable chip formation. Tiger‑tec Gold coating for long tool life WPP30G grade optimised for steel machining Square 90° insert, 1.2 mm corner radius HU7 chipbreaker designed for reliable chip control Negative rake 0° for stable cutting conditions Reliable performance for steel machining with extended tool life The combination of Tiger‑tec Gold coating and a coated carbide substrate offers improved resistance to abrasive wear and thermal loading, which translates into longer productive tool life. The WPP30G grade is formulated for machining steel (ISO P), balancing hardness and toughness to handle both continuous and interrupted cuts. For production environments where reproducible results and reduced tool-change frequency are priorities, this insert provides a measurable advantage through stability at the cutting edge and consistent dimensional retention. Predictable chip control and surface quality for easier downstream processing The HU7 chipbreaker is engineered to generate short, manageable chips when cutting steel, reducing the risk of entanglement and improving operator safety. The insert’s negative rake (0°) geometry contributes to stable cutting forces and enhances edge strength, which helps maintain a consistent surface finish even under heavier depths of cut. Explaining the technical terms: a chipbreaker shapes and breaks the metal swarf, while a negative rake angle increases the effective cutting edge robustness — both factors supporting reliable series production. Strength and repeatability from the square 90° form and 1.2 mm corner radius A square 90° insert delivers symmetric cutting edges and straightforward indexability, improving cost-effectiveness by offering multiple usable corners. The 1.2 mm corner radius balances strength and finish: larger radii resist edge chipping under load, while still allowing acceptable surface quality. For operations that require repeatable tool life and minimal variance between parts, the geometry of this insert helps maintain process stability and reduces rework. Practical application guidance for industrial workshops The insert is provided in the SNMM form factor with chipbreaker HU7 and the WPP30G grade, making it suitable for general to slightly demanding steel turning tasks. In practice, select cutting speeds and feeds that match the workpiece alloy and machine rigidity; the coated grade performs well under typical steel cutting temperatures and benefits from stable coolant use when applicable. Where operators are transitioning from uncoated grades, expect a noticeable increase in edge life and a reduction in frequent interventions, supporting smoother production cycles. Contact Metav Werkzeuge for guidance on integrating the Walter Tools SNMM190612-HU7 WPP30G insert into existing turning processes or for tailored recommendations based on specific steel grades and machining conditions; info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: SNMM190612-HU7-WPP30G-WALTER SKU / UID: SNMM190612-HU7-WPP30G-WALTER Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Grade / Sort: WPP30G Series: Tiger‑tec Gold Core facts Corner radius: 1.2 mm Insert size: 19 Insert form: Square 90° Rake angle: 0° (negative) Thickness code: 06 Tolerance class: M Design & features Coating: Tiger‑tec Gold (coated carbide technology) Chipbreaker: HU7 Suitable material group: Steel (ISO P) Form designation: SNMM190612-HU7 Series description: WPP30G — coated carbide for steel machining FAQ What materials is this insert designed for? The SNMM190612-HU7 WPP30G insert is designed primarily for steel (ISO P); the WPP30G grade and Tiger‑tec Gold coating are optimised for the heat and chip characteristics of steel turning. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on the SNMM190612-HU7 WPP30G promotes short, controlled chips during steel turning, improving safety and reducing chip-handling needs while supporting consistent surface quality. Is the insert indexable and how many usable edges are available? The square 90° geometry provides multiple indexable cutting edges; each corner can be rotated to present a fresh edge, increasing effective tool life and improving cost efficiency in production. Which cutting conditions benefit most from the WPP30G grade? The WPP30G grade excels under typical steel turning conditions where a balance of wear resistance and toughness is required; it is particularly beneficial for operations seeking longer tool life and reproducible results. Can the SNMM190612-HU7 WPP30G be used for interrupted cuts? Yes, the negative rake (0°) geometry and the robust WPP30G grade confer improved edge strength, making the insert suitable for light to moderate interrupted cutting in steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners. The mentioned trade names are used for explanatory purposes only. There is no affiliation between our company and the brands named; the offered item is an original, factory-new product of the manufacturer.
SNMM190616-HU3 WPP10G Wendeplatten - Walter Tools
Take advantage of a high-performance coated carbide grade and a robust chipbreaker to increase process stability and tool life in steel turning. The combination of Tiger‑tec Gold coating with the WPP10G grade and the HU3 chipbreaker supports consistent chip control and reliable surface quality; order or request advice directly via Metav Werkzeuge for swift procurement and technical clarification. SNMM190616-HU3 WPP10G — indexable turning insert (for steel) by Walter Tools The SNMM190616-HU3 WPP10G is an indexable turning insert engineered for steel machining, combining the Tiger‑tec Gold coated carbide grade with a HU3 chipbreaker for stable, productive turning. Tiger‑tec Gold coated grade WPP10G Square 90° insert with 1.6 mm nose radius HU3 chipbreaker for reliable chip control Optimised for steel machining Stable chip formation for uninterrupted production The combination of the HU3 chipbreaker and the Tiger‑tec Gold technology ensures consistent chip control when machining ISO group P materials. The chipbreaker is designed to promote predictable chip formation at typical cutting conditions for steel, reducing the risk of long, stringy chips that interrupt automated operations. With a square 90° geometry and a 1.6 mm corner radius, the insert provides a strong cutting edge that tolerates moderate interruptions and tool engagement variations, which supports higher process reliability and fewer unexpected tool changes. This stability translates into more predictable cycle times and less rework. High wear resistance with predictable edge life The WPP10G grade is a coated carbide developed under the Tiger‑tec Gold family for a balance between wear resistance and toughness. The coating improves thermal and abrasive resistance during continuous turning of steel, while the substrate maintains edge strength under elevated cutting stresses. The negative 0° rake (0° negative) creates a robust cutting geometry that resists chipping and withstands demanding interruptions, making the insert suitable for applications where a secure, repeatable edge life is required. These material and geometry choices contribute to measurable productivity gains through longer tool life and steadier surface finish quality. Practical design for easy integration and reliable handling The insert’s designation and form follow established turning standards, enabling straightforward integration into compatible toolholders. The SNMM190616-HU3 format and thickness code provide sufficient rigidity for a broad range of turning tasks in production and workshop environments. Where operator familiarity is limited, the clear specification of the chipbreaker type and the ISO P suitability simplifies tool selection and reduces setup uncertainty. The insert’s construction supports shops aiming for a pragmatic balance between productivity and cost-efficiency, delivering a technically clear solution without unnecessary complexity. Contact Metav Werkzeuge for tailored advice on toolholder compatibility and procurement of Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations and availability Technical Data SKU: SNMM190616-HU3-WPP10G-WALTER Label: Drehwendeschneidplatte SNMM190616-HU3 WPP10G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Designation: SNMM190616-HU3 Facts Insert size: 19 mm Corner radius: 1.6 mm Thickness code: 06 Free rake angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features Chipbreaker: HU3 Coating technology: Tiger‑tec Gold Substrate: Coated carbide Material application: ISO group P (steel) Execution: M FAQ What materials is this insert suitable for? The SNMM190616-HU3 WPP10G insert is designed for ISO group P use and is primarily intended for machining steel under typical turning conditions. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker promotes controlled chip formation during turning of steel, helping to avoid long, entangling chips and supporting steady automated or manual operations with improved surface consistency. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating increases wear resistance and thermal stability of the coated carbide grade WPP10G, resulting in longer tool life and more consistent performance in demanding steel applications. Is the insert geometry suitable for interrupted cuts? The square 90° shape combined with a 1.6 mm corner radius and negative 0° rake offers a robust cutting edge that tolerates interrupted cuts better than more fragile geometries. How is the SNMM190616-HU3 identified in procurement? The insert is identified by the designation SNMM190616-HU3 WPP10G and the SKU SNMM190616-HU3-WPP10G-WALTER for ordering and inventory purposes. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only; no affiliation or endorsement by the brand is implied. The offered article is original, factory-new goods from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SNMM190616-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, the universal WPP20G grade for steel and the HU3 chipbreaker for stable chip control to increase process reliability and reduce tool changes. Order the insert directly via Metav Werkzeuge or ask our consultants for application support. SNMM190616-HU3 WPP20G indexable turning insert, Tiger·tec Gold – Walter Tools The SNMM190616-HU3 WPP20G is a square 90° indexable turning insert designed for ISO P (steel) machining, featuring a HU3 chipbreaker and Tiger·tec Gold coating for productive turning. Tiger·tec Gold coating for extended tool life Designed for steel machining (ISO P) HU3 chipbreaker for stable chip control Square 90° insert with 1.6 mm corner radius Durable coating technology that extends productive cutting time The coated carbide grade WPP20G is part of the Tiger·tec Gold series and is formulated for a broad range of steel applications. The combination of an engineered coating and a wear-resistant substrate reduces flank and crater wear under typical steel cutting temperatures, resulting in longer in-service life and fewer indexings. For workshops focused on steady throughput, this means less downtime for tool changes and more consistent batch-to-batch performance. The design is suited to general turning tasks where a balance of economy and durability is required, delivering predictable tool lifecycle and improved overall equipment effectiveness. Stable chip control and secure process behaviour Equipped with the HU3 chipbreaker and a neutral 0° (negative) rake, the geometry promotes controlled chip formation and evacuation when machining steels. The square 90° shape and a 1.6 mm corner radius provide robust edge strength for intermittent cuts and general-purpose roughing and finishing passes. As a result, the insert supports steady cutting forces and reduced vibration, which contributes to surface quality and tool life. The combination of geometry and chipformer helps to maintain secure clamping conditions and consistent heat distribution during operation. Practical design for reliable workshop performance The insert’s dimensions (19 mm size, plate thickness as specified) and tolerance class M reflect a manufacture standard that simplifies toolholder selection and replacement cycles. Because the grade targets steel (ISO P), machining parameters can be standardised across multiple parts, lowering the complexity of process setup. This practicality improves machining economy: fewer special inserts are required, and tool management becomes more straightforward. For procurement and planning, the insert aligns with demands for stable production, good surface finish and repeatable results in everyday turning operations. For tailored cutting data, application recommendations and to secure fast availability of the Walter Tools SNMM190616-HU3 WPP20G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct, application-oriented advice and supply. Technical data Article number: SNMM190616-HU3-WPP20G-WALTER Designation: SNMM190616-HU3 WPP20G Manufacturer: Walter Tools Product type: Indexable turning insert (square 90°) Grade / Series: WPP20G / Tiger·tec Gold Facts Insert size: 19 mm Corner radius: 1.6 mm Cutting edge angle: 90° Rake angle: 0° (negative) Plate thickness: 06 Special features Chipbreaker: HU3 Coating technology: Tiger·tec Gold Grade material: Coated carbide Application: Steel (ISO P) Tolerance class: M Execution: M FAQ What materials is this insert suitable for? The SNMM190616-HU3 WPP20G insert is designed for machining steels (ISO P); the WPP20G grade is optimised for the heat and chip characteristics typical of steel cutting. Which chipbreaker does the insert use and what benefit does it bring? This indexable insert uses the HU3 chipbreaker, which improves chip control and evacuation for stable cutting, resulting in consistent surface quality and reduced risk of built-up edge during steel turning. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and heat management, extending tool life and enabling more productive machining cycles with fewer tool changes. Is the insert suitable for interrupted cuts or heavy roughing? The square 90° geometry combined with a 1.6 mm corner radius provides strong cutting edges suitable for many intermittent and general-purpose roughing applications in steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from Walter Tools.
SNMM190616-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP30G grade for durable, productive steel machining; the 90° square geometry with a 1.6 mm corner radius delivers robust edge strength for consistent part quality. Order genuine Walter Tools inserts directly via Metav Werkzeuge or ask our consultants for application advice. SNMM190616-HU3 WPP30G indexable turning insert – Tiger·tec Gold coating, for steel (Walter Tools) The SNMM190616-HU3 WPP30G is a square 90° indexable turning insert engineered for effective steel turning operations, combining a coated carbide grade with a chipbreaker optimised for stable machining. Tiger·tec Gold coating for extended tool life Optimised for steel machining (ISO P) Square 90° geometry with 1.6 mm corner radius Negative 0° rake for robust cutting Proven coating technology for longer tool life and economy The combination of Tiger·tec Gold and the WPP30G coated carbide grade provides a balance between wear resistance and toughness that suits extended production runs. The coating reduces flank and crater wear under the thermal and mechanical loads typical of machining steels, which translates into longer tool life and fewer insert changes during a shift. For production environments looking to increase uptime, this grade supports consistent cutting performance and predictable regrinding intervals. Stable chip formation and reliable cutting under load Equipped with the HU3 chipbreaker and a negative 0° rake, the insert is designed to manage chips and forces in heavy or interrupted cuts. The chipbreaker geometry promotes short, manageable chips when machining steel, improving machine safety and reducing downtime from chip-related issues. The negative rake enhances edge strength for robustness during roughing, giving increased process security where tool breakage would cause costly interruptions. Geometry and tolerances that support accurate, repeatable turning The 90° square shape combined with a 1.6 mm corner radius offers a strong cutting edge that helps resist chipping while producing stable component radii. The insert’s format (size designation 19 and thickness designation 06) and tolerance class M make it suitable for automated toolholders and quick changeover systems in modern turning centres. These geometric choices ensure both dimensional consistency and ease of integration into existing tooling systems, supporting efficient workpiece finish and batch reproducibility. For high-process reliability with Tiger·tec Gold, contact Metav Werkzeuge to discuss the SNMM190616-HU3 WPP30G insert from Walter Tools and secure the right grade for your steel turning applications Technical Data SKU: SNMM190616-HU3-WPP30G-WALTER Article designation: SNMM190616-HU3 WPP30G Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Gold Grade: WPP30G Manufacturer: Walter Tools Tolerance class: M Facts Corner radius: 1.6 mm Size designation: 19 mm Thickness designation: 06 Rake angle: 0° (negative) Geometry: Square 90° Chipbreaker: HU3 Special features Coating: Tiger·tec Gold (coated carbide) Application: Steel (ISO P) Execution: M Designed for stable chip formation and productive machining WPL designation: SNMM190616-HU3 FAQ What materials is this insert suited for? The SNMM190616-HU3 WPP30G indexable turning insert from Walter Tools is optimised for machining steel (ISO P) and is formulated to manage the heat and chip patterns typical for unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP30G grade reduces wear rates and improves thermal stability during turning, which helps extend tool life and maintain consistent surface quality on steel components. What advantages does the HU3 chipbreaker provide? The HU3 chipbreaker promotes short, controllable chips when machining steel, enhancing machine safety and reducing the need for manual chip handling or ancillary chip-breaking measures. Is the negative 0° rake suitable for roughing operations? Yes, the negative 0° rake increases edge robustness and resistance to mechanical shocks, making the insert appropriate for heavier cuts and interrupted cutting typical in roughing. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
SNMM190616-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
High wear resistance and consistent chip control support steady production when machining rostfreier Stahl; the Tiger‑tec Gold coating combined with the WMP20G grade and HU5 chipbreaker yields predictable tool life and surface finish. Order directly via Metav Werkzeuge or consult our specialists for cutting-parameter recommendations. SNMM190616-HU5 WMP20G turning indexable insert — Tiger‑tec Gold coating, HU5 chipbreaker (Walter Tools) A SNMM190616-HU5 WMP20G turning insert designed for dependable machining of rostfreier Stahl in medium to robust turning operations Tiger‑tec Gold coating for extended tool life HU5 chipbreaker for secure chip formation Square 90° geometry for versatile turning Optimised for rostfreier Stahl performance Reliable performance and economy through advanced coating The Tiger‑tec Gold coating coupled with the WMP20G carbide grade delivers high wear resistance and improved adhesion control under the thermal and mechanical loads typical of rostfreier Stahl machining. This makes the insert particularly suited to operations where cutting-edge stability and predictable tool life reduce downtime. The combination of a robust coating and the grade’s microstructure supports consistent edge integrity, allowing stable cutting parameters that benefit cycle-time planning and production costing. Stable chip control and consistent surface quality The HU5 chipbreaker is engineered to manage chips reliably during medium to heavy cuts. By promoting short, segmented chips the geometry reduces the risk of entanglement and supports a uniform material flow away from the cutting zone. For machining rostfreier Stahl—materials that tend to be tough and generate heat—the controlled chip formation helps maintain surface finish and prevents built-up edge, which in turn minimises rework and maintains tolerance adherence on turned components. Geometry and design that enable productive turning Square 90° format with a 1.6 corner radius and a 0° (negative) relief angle provides a stable cutting platform for transverse loads and interrupted cuts. The insert’s plate designation and thickness deliver repeatable seating in standard insert holders, while the square shape gives four usable cutting edges per indexable insert, improving cost-efficiency per edge. These geometrical characteristics translate into lower tool-change frequency and easier tool management on the shop floor, supporting continuous, predictable operation in batch and single-piece production. Practical application advice and process security The grade is targeted at rostfreie Stähle and is optimised for medium to robust cutting conditions; operators can expect good edge life where thermal stability and chip control are required. When integrating the insert, assess feed and speed with an emphasis on reducing built-up edge—moderate feeds with controlled coolant or air blast often yield the best combination of tool life and surface finish. For bespoke parameter sheets or trial support, technical consultation is recommended to match insert geometry to machine capacity and workpiece specifications. Contact Metav Werkzeuge for tailored application advice on the Tiger‑tec Gold WMP20G inserts or to request cutting-parameter guidance for rostfreier Stahl; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: SNMM190616-HU5-WMP20G-WALTER Designation: SNMM190616-HU5 WMP20G Manufacturer: Walter Tools Core dimensions Plate size: 19 Corner radius: 1.6 Thickness designation: 06 Relief angle: 0° (negativ) Plate form: Quadrat 90° Special features Coating: Tiger‑tec Gold Grade: WMP20G Chipbreaker: HU5 Series: Tiger‑tec Gold Material group suitability: M (rostfreier Stahl) Execution: M FAQ What materials is this insert suitable for? The SNMM190616-HU5 WMP20G insert is designed primarily for rostfreier Stahl and is optimised to manage the toughness and heat behaviour of such materials. How does the HU5 chipbreaker affect machining behaviour? The HU5 chipbreaker promotes controllable, segmented chips that reduce entanglement and support consistent surface finish when using the SNMM190616-HU5 WMP20G insert. Which coating and grade combination is used on this insert? The insert features the Tiger‑tec Gold coating on the WMP20G carbide grade, offering enhanced wear resistance and edge stability for demanding turning tasks. What are the key geometric values to consider when programming feeds and speeds? Consider the 1.6 corner radius, square 90° form and the 0° (negative) relief when selecting feeds and depths of cut; these influence cutting forces and stability for the SNMM190616-HU5 WMP20G. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the leading manufacturers of precision cutting tools for metalworking, offering solutions focused on process security, surface quality and tool life.
SNMM190616-HU5 WPP20G HU5 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold technology and the WPP20G grade to increase process reliability and tool life in steel turning; the HU5 chipbreaker and 1.6 mm corner radius combine to deliver consistent chip control and improved surface finish. Order directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. SNMM190616-HU5 WPP20G indexable turning insert for steel — Walter Tools, Tiger‑tec Gold, HU5 The SNMM190616-HU5 WPP20G is a square 90° indexable turning insert engineered for turning steel (ISO group P), pairing the Tiger‑tec Gold coating with an HU5 chipbreaker to ensure stable machining and reliable wear behaviour. Tiger‑tec Gold coated carbide grade WPP20G Optimised for steel (ISO group P) HU5 chipbreaker for consistent chip control 1.6 mm corner radius, square 90° geometry Increase throughput with a coating designed for steel The combination of Tiger‑tec Gold coating and the WPP20G graded substrate is designed specifically for turning operations in steel, delivering higher cutting-edge stability and prolonged tool life. The coating reduces adhesion and wear at the cutting edge, which leads to fewer tool changes and higher machine uptime. For production environments where cycle times and repeatability matter, this technical pairing provides a measurable efficiency advantage by reducing downtime and improving the consistency of finished parts. Predictable chip control for safer, faster turning The insert’s HU5 chipbreaker is developed to produce controlled, short chips in the typical temperature and chip-formation conditions of steel machining. Controlled chips reduce the risk of entanglement, protect the workpiece and tool, and simplify chip handling in automated cells. By relying on a proven chip geometry, process engineers can push cutting parameters closer to productive limits while maintaining process security and component quality. Geometry and mechanical stability for improved surface finish A 1.6 mm corner radius in a square 90° format offers a solid compromise between edge strength and surface integrity. The larger corner radius increases edge support, which reduces the tendency for vibration and microchipping during interrupted cuts, and consequently improves surface finish and dimensional stability. Where finish quality is critical, selecting the correct corner radius is as important as the grade — this insert’s geometry is optimised to combine robustness with the capacity to deliver smooth part surfaces. Practical benefits and application guidance The coated carbide substrate and the HU5 chipbreaker make this insert suitable for a broad range of steel turning tasks, from general finishing to more demanding roughing where consistent chip formation is required. The SNMM190616-HU5 WPP20G offers a balance of productivity and process reliability, making it a practical choice for job shops and production lines alike. For unfamiliar materials or atypical cutting conditions, consult the cutting data tables or contact Metav Werkzeuge’s technical advisors to fine-tune feed and speed for best results. Choose Walter Tools Tiger‑tec Gold inserts for reliable steel turning — contact Metav Werkzeuge for a tailored recommendation and fast delivery Technical Data Article number: SNMM190616-HU5-WPP20G-WALTER Designation: SNMM190616-HU5 WPP20G Type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Execution: M Core Dimensions Corner radius: 1.6 mm Plate size: 19 mm Thickness code: 06 Free angle: 0° (negative) Geometry: Square 90° Special features Coating: Tiger‑tec Gold Chipbreaker: HU5 Substrate: Coated carbide Suitable for: Steel (ISO group P) Tolerance class: M FAQ Which materials is this insert intended for? The SNMM190616-HU5 WPP20G insert from Walter Tools is intended primarily for steel (ISO group P), with the grade and coating optimised for the typical heat and chip-formation behaviour of such materials. What does the WPP20G grade indicate? WPP20G denotes a Walter Tools coated carbide grade within the Tiger‑tec Gold family; it is formulated for general-purpose steel turning, offering a balanced combination of wear resistance and toughness. When should the HU5 chipbreaker be selected? The HU5 chipbreaker is recommended for operations that require reliable short-chip formation in steel turning, including semi-finish and finish cuts where predictable chips and good surface quality are priorities. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge support and improves resistance to mechanical shock, which helps to maintain surface finish and dimensional accuracy during heavier cuts or interrupted machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is original, brand-new merchandise from the respective manufacturer.
SNMM190616-HU5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of robust cutting performance and reliable chip control with a coated carbide grade tailored for demanding materials; the combination of Tiger·tec Silver coating and the HU5 chipbreaker supports stable cutting edges and predictable results. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMM190616-HU5 WSM30S indexable turning insert — for stainless steels and superalloys (Walter Tools) The SNMM190616-HU5 WSM30S is a square indexable turning insert engineered for heavy-duty machining of stainless steels and heat-resistant superalloys, offering high edge stability and controlled chip formation. Tiger·tec Silver coated carbide for heat resistance Optimised HU5 chipbreaker for controlled chip flow Square 90° form with 1.6 mm corner radius Negative 0° geometry for secure edge strength Longer tool life through a heat-resistant coating The coated carbide specification WSM30S, part of the Tiger·tec Silver family, is designed to resist thermal and mechanical wear when machining stainless steels and nickel-based alloys. The coating increases surface hardness at elevated temperatures and reduces flank wear, which extends effective tool life and lowers downtime for tool changes. For production environments where repeatability and consistent productivity matter, this grade offers a dependable combination of durability and cutting performance that supports extended machining cycles and dependable cycle times. Predictable chip control and process stability The HU5 chipbreaker geometry is optimised to produce short, controllable chips under the high heat and built-up-edge tendencies of tough alloys. This results in improved swarf management, reduced risk of re-cutting chips and fewer interruptions at the machine. Process stability is enhanced by the insert’s geometry and the negative 0° cutting angle, which together provide a robust cutting edge especially suited to heavier cuts and interrupted machining. The outcome is less vibration, fewer edge failures and consistent surface quality. Strong form for secure cutting and good surface finish The square 90° insert form offers four usable cutting corners and a rigid contact geometry that supports heavy radial forces. Combined with a 1.6 mm corner radius, the insert balances edge strength with the potential for improved workpiece finish, making it suitable for operations where both robustness and acceptable surface integrity are required. The design is particularly effective when machining components that demand repeatable dimensional accuracy and reliable edge behaviour. Versatile application support for demanding materials Rated for ISO groups M and S, this insert accommodates stainless steels and heat-resistant superalloys or titanium alloys, addressing materials that typically generate high temperatures and sticky chips. The coated carbide substrate and the insert’s mechanical geometry help prevent rapid tool wear and support secure chip evacuation, which is essential in high-value component production. When process engineers require stable tool performance across varying batch sizes and alloy grades, this insert provides a straightforward, application-oriented solution. Contact Metav Werkzeuge to discuss suitability of the Walter Tools SNMM190616-HU5 WSM30S insert for specific components and to arrange technical details or delivery options Technical Data SKU: SNMM190616-HU5-WSM30S-WALTER Designation: SNMM190616-HU5 WSM30S Product type: Indexable turning insert (square) Manufacturer: Walter Tools Core specifications Shape: Square 90° Corner radius: 1.6 mm Size: 19 Thickness code: 06 Free angle: 0° (negative) Tolerance class: M Features and suitability Grade/series: WSM30S — Tiger·tec Silver Chipbreaker: HU5 Material: Coated carbide Applications: Stainless steels (ISO M), heat-resistant superalloys / titanium (ISO S) Geometry: Negative rake for edge strength and interrupted cuts FAQ What materials is this insert optimised for? The SNMM190616-HU5 WSM30S insert is optimised for stainless steels (ISO M) and heat-resistant superalloys or titanium (ISO S), offering improved thermal resistance and edge stability for such materials. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker on the WSM30S grade promotes short, controlled chips and reliable swarf evacuation, enhancing process stability when machining sticky or heat-generating alloys. What advantages does the square 90° form provide? The square 90° form provides multiple usable cutting edges and a rigid geometry that supports higher radial loads and consistent dimensional results during robust turning operations. Is the insert suitable for interrupted cuts? Yes; the negative 0° geometry and the 1.6 mm corner radius give the insert a secure cutting edge that tolerates interrupted cuts and reduces the risk of edge chipping. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases resistance to thermal and abrasive wear, which prolongs tool life and helps maintain a stable cutting edge in demanding production scenarios. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Walter Tools is part of the Walter AG group and a globally recognised brand for precision metalcutting tools. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any commercial association between our company and the trademark holders. The offered item is an original, factory-new product of the manufacturer.
SNMM190616-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WPP20G grade optimised for Stahl, and precise geometry for dependable chip control and extended tool life; order directly via Metav Werkzeuge or request advice from our consultants to ensure immediate process integration. SNMM190616-HU7 WPP20G indexable turning insert — Tiger·tec Gold, for Stahl | Walter Tools The SNMM190616-HU7 WPP20G is a square 90° coated carbide turning insert from the Tiger·tec Gold series, designed for reliable finishing and medium-duty turning of Stahl. Tiger·tec Gold coated carbide Optimised for turning Stahl Square 90° insert, 19 mm size HU7 chipbreaker for controlled chips Durable Tiger·tec Gold coating for longer productive runs The Tiger·tec Gold technology and the WPP20G coated carbide deliver a tangible increase in resistance to abrasive wear and thermal loading during Stahl turning. Coated carbide grades combine a hard substrate with multilayer surface treatments to slow flank and crater wear; this results in longer tool life and fewer index changes on the turret, which directly reduces downtime. For production environments this means more consistent cycle times and a measurable improvement in tool-change intervals. Geometry and chip control that stabilise the machining process A square 90° shape with a 1.6 mm corner radius and the HU7 chipbreaker create a stable cutting geometry that supports predictable chip formation and surface finish. The 0° (negative) relief angle increases edge strength for interrupted cuts and heavy cross‑sections, while the medium tolerance class M ensures repeatable seating in standard toolholders. The chipbreaker design guides chips away from the cutting edge to avoid entanglement; in practice this reduces rework, protects the workpiece surface and improves swarf evacuation in blocked coolant situations. Practical benefits for workshops and CNC turning centres Specifically intended for Stahl applications, the insert’s specifications (19 mm size, designation 06 thickness) allow easy integration into common insert pockets and turning systems. The combination of coated substrate and robust edge geometry supports both roughing passes with improved edge life and finishing passes with reliable surface quality. For shops aiming to increase throughput, this insert offers a cost‑efficient balance of durability and process stability, while the ISO designation aids straightforward tool planning and inventory management. The SKU and series information assist in selecting the matching grade for existing holders and cutters. For consistent, high‑productivity Stahl turning with Walter Tools inserts, contact Metav Werkzeuge for delivery and application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SNMM190616-HU7-WPP20G-WALTER Type: indexable turning insert (square) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G ISO designation: SNMM190616-HU7 WPP20G Execution: M Facts Insert size: 19 mm Corner radius: 1.6 mm Thickness designation: 06 Relief angle: 0° (negative) Shape: square 90° Chipbreaker: HU7 Tolerance class: M Materials & features Coating: Tiger·tec Gold (coated carbide) Material group: suitable for Stahl (P group) Ideal for: turning operations requiring chip control and edge stability Application focus: medium-duty finishing and productive roughing FAQ Which materials can this insert machine effectively? The SNMM190616-HU7 WPP20G is formulated for machining Stahl (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the temperatures and chip formation typical of Stahl cutting. How does the HU7 chipbreaker improve the turning process? The HU7 chipbreaker on this square insert promotes controlled chip formation and guided evacuation, reducing chip re-cutting and helping to maintain surface quality and tool life during continuous turning operations. Is the insert suitable for interrupted cuts or heavy cross‑sections? Yes; the 0° (negative) relief and robust edge geometry increase edge strength, making the insert appropriate for interrupted cuts and instances where increased edge toughness is required. How does the corner radius affect finish and tool life? The 1.6 mm corner radius balances edge strength and surface finish: it supports higher feed rates and greater durability than a smaller radius while still providing acceptable finish for general turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Proprietary trademarks and product names are the property of their respective owners and are used here for identification and explanation purposes only.
SNMM190616-HU7 WPP30G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the HU7 chipbreaker provides reliable chip control and extended tool life for steel turning; the robust square form and 1.6 mm corner radius ensure secure shoulder cuts and repeatable results. Order or request application advice directly via Metav Werkzeuge for fast integration into production. SNMM190616-HU7 WPP30G — Turning indexable insert, Tiger·tec Gold for steel (Walter Tools) A SNMM190616-HU7 WPP30G indexable insert designed for medium-duty steel turning with a 90° square geometry and optimised chip control. Tiger·tec Gold coating for long tool life Optimised HU7 chipbreaker for stable chips Square 90° form for robust shoulder turning Suitable for steel machining (ISO P) Stable chip control for predictable cycle times The combination of the WPP30G grade and the proprietary Tiger·tec Gold coating focuses on consistent performance when machining steels. The HU7 chipbreaker is engineered to produce short, controllable chips under the thermal and mechanical conditions typical for ISO P materials, which reduces risk of re-cutting and tool damage. Predictable chip behaviour lowers unplanned stoppages and enables a steadier production rhythm, helping to improve overall process efficiency and spindle utilisation. Precision geometry that improves surface finish and repeatability A square 90° form with 1.6 mm corner radius and a negative 0° clearance provides a stiff cutting edge that resists chipping during shoulder and profiling cuts. This geometry supports robust cutting parameters and helps to maintain a constant cutting line, which contributes to improved surface quality and dimensional repeatability. The insert’s tolerance class M and the stable edge design make it suitable for applications where consistent part finish and repeatable set-ups are priorities. Practical selection and process support to lower machining costs The hardmetal grade of this insert is tailored to the demands of steel machining, balancing wear resistance and toughness to extend tool life without sacrificing edge stability. Using a standard square insert format simplifies inventory and tooling choices while the Tiger·tec Gold technology reduces flank wear and the need for frequent index changes. For manufacturers aiming to cut cycle times and reduce tooling costs, this insert offers a pragmatic compromise between durability and versatility; technical advisors at Metav Werkzeuge can provide recommended cutting data and application pairing for specific machines and workpiece conditions. Contact Metav Werkzeuge for individual cutting-data recommendations and to discuss how the Walter Tools SNMM190616-HU7 WPP30G can be implemented in current turning operations Technical data Article number / SKU: SNMM190616-HU7-WPP30G-WALTER Designation: SNMM190616-HU7 WPP30G Product type: Turning indexable insert Brand: Walter Tools Grade: WPP30G Series: Tiger·tec Gold Core figures Corner radius: 1.6 mm Plate size: 19 mm Clearance angle: 0° (negative) Plate form: Square 90° Thickness designation: 06 Materials & features Coating: Tiger·tec Gold Chipbreaker: HU7 Applicability: Steel (ISO P) Tolerance class: M Execution: M FAQ What materials is this insert intended for? The SNMM190616-HU7 WPP30G is optimised for steel machining and follows the ISO P application group for unalloyed and alloyed steels. How does the HU7 chipbreaker affect machining? The HU7 chipbreaker on the WPP30G grade produces controlled, shorter chips under typical steel cutting conditions, improving chip evacuation and reducing the chance of recutting. Is the insert suited for shoulder turning and heavy cuts? The square 90° form combined with a 1.6 mm corner radius and negative 0° clearance delivers strong edge support for shoulder cuts and robust turning operations with enhanced repeatability. Which brand and SKU should be referenced when ordering or specifying tooling? Reference Walter Tools SNMM190616-HU7 WPP30G (SKU SNMM190616-HU7-WPP30G-WALTER) to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The item offered is an original, factory‑new product of the stated manufacturer.
SNMM190624-HU3 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, Tiger·tec Gold coating and precise geometry for consistent steel turning results; order the insert via Metav Werkzeuge or request application advice from our consultants. SNMM190624-HU3 WPP20G indexable turning insert — Walter Tools (Tiger·tec Gold, square 90°) The SNMM190624-HU3 WPP20G is a coated carbide indexable insert designed for general steel turning applications, offering controlled chip formation and a durable cutting edge for productive machining. *Tiger·tec Gold coating technology *WPP20G grade optimised for steel machining *Square 90° geometry with 2.4 mm nose radius *HU3 chipbreaker for reliable chip control Consistent performance for steel turning operations The combination of Tiger·tec Gold coating and the WPP20G grade provides a reliable balance between wear resistance and toughness for machining steel. The coated carbide construction is engineered to handle the typical heat and chip formation encountered in steel turning, which results in more predictable tool life and fewer unscheduled tool changes. Material-specific behaviour is addressed by the grade, so process parameters can be standardised and machining windows be defined more easily for production planning. Geometry engineered for repeatable accuracy and surface quality A square 90° insert with a 2.4 mm nose radius and negative 0° clearance angle delivers stable cutting conditions and straightforward tool setting in classic turning fixtures. The insert geometry supports consistent engagement and promotes even wear across the cutting edge, which translates into repeatable surface finish and dimensional stability. Because the geometry is standardised, coolant and feed strategies can be adapted without complex requalification of fixtures. Improved productivity through chip control and edge stability The HU3 chipbreaker is designed to produce short, manageable chips during typical steel turning cycles, reducing interruptions and lowering the risk of entanglement. The coating system contributes to a stable cutting edge, helping to maintain cutting performance over longer intervals; this reduces downtime and increases throughput. Where higher speeds are applied, the coated carbide chemistry maintains edge integrity, enabling efficient material removal rates while preserving surface quality. Practical integration and selection guidance for production use This indexable insert is intended for applications where reliable, general-purpose steel machining is required. Selection is simplified by the clear material designation for steel and the standard insert format used in common toolholders. For process planning, the grade and chipbreaker combination allow straightforward parameter transfer between similar operations, and assembly is compatible with standard clamping systems used in turning centres. For specific cycle optimisation or alternative workpiece materials, technical consultation is available. Contact Metav Werkzeuge for technical recommendations and to request a tailored quotation for Walter Tools Tiger·tec Gold inserts; Metav Werkzeuge will advise on stock status and application parameters via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMM190624-HU3-WPP20G-WALTER SKU: SNMM190624-HU3-WPP20G-WALTER Designation: SNMM190624-HU3 WPP20G Series: Tiger·tec Gold Grade: WPP20G Core measurements Plate form: Square 90° Plate size: 19 mm Corner radius: 2.4 mm Relief angle: 0° (negative) Plate thickness: 06 Tolerance class: M Materials & special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: HU3 Material application: Steel (P) Execution: M Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools FAQ What materials is this insert designed for? The SNMM190624-HU3 WPP20G insert is specified for steel machining (material group P) and the WPP20G grade is optimised to handle the thermal and chip-forming characteristics of steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker produces short, controlled chips in typical turning operations, which supports uninterrupted machining and safer chip handling in production. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating improves wear resistance while retaining edge toughness, resulting in more consistent tool life and stable cutting performance on steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. The Walter brand is used here for explanation of the product; there is no affiliation with Metav Werkzeuge. The offered article is an original, factory-new item of the manufacturer.
SNMM190624-HU5 WMP20G HU5 Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating and a robust HU5 chipbreaker for reliable machining of stainless steel, ensuring consistent chip control and long tool life. Order directly via Metav Werkzeuge or consult our specialists for application advice. SNMM190624-HU5 WMP20G Drehwendeschneidplatte (stainless steel) – Walter Tools, Tiger‑tec Gold, 2.4 mm corner radius SNMM190624-HU5 WMP20G is a square indexable turning insert designed for machining stainless steels under medium to heavy conditions, offering secure chip control and a stable cutting edge. Tiger‑tec Gold coating for wear resistance HU5 chipbreaker for secure chip control Square 90° form for versatile turning operations Suitable for stainless steel machining Consistent performance where chip control matters The Tiger‑tec Gold coating and the WMP20G grade are engineered for machining stainless steel, a group of materials prone to built-up edge and heat generation. The combination of a coated carbide substrate and the HU5 chipbreaker promotes reliable chip formation and evacuation, reducing downtime caused by clogged flutes or interrupted cuts. This results in a steadier machining process and contributes to predictable tool life, which is essential for high-volume or repeat production runs. Stable cutting edge and dimensional reliability A square 90° insert with a 2.4 mm corner radius provides both strength at the cutting edge and the ability to achieve robust profiles. The specified 0° negative rake contributes to a secure cutting geometry for tougher cuts, improving edge stability in interrupted or heavy-duty turning. These design characteristics lead to fewer insert changes and a reduction in setup variation, supporting repeatable, high-quality components. Practical advantages for workshop productivity The insert’s geometry and the WMP20G grade focus on practical machining benefits: improved process security and predictable wear behaviour. The result is fewer rejects and more consistent surface finishes when turning corrosion‑resistant alloys. Using such an indexable insert simplifies tool inventory, since one grade covers a broad range of stainless steel machining tasks under medium to robust conditions. Application guidance and process efficiency For optimal results with this turning insert, pair the geometry with appropriate cutting parameters tailored to the workpiece grade of stainless steel and the machine’s rigidity. The HU5 chipbreaker is particularly effective at producing short, manageable chips in many turning operations, reducing the need for elaborate chip management systems and contributing to a safer and cleaner machining environment. Where process stability is prioritised, this insert supports steady cycle times and predictable maintenance intervals. For tailored recommendations on using Walter Tools Tiger‑tec Gold inserts in specific stainless steel applications, please contact Metav Werkzeuge for expert advice and to place your order. Technical Data SKU: SNMM190624-HU5-WMP20G-WALTER Designation: SNMM190624-HU5 WMP20G Manufacturer: Walter Tools Facts Insert size: 19 Corner radius: 2.4 mm Thickness: 06 Form: Square 90° Rake angle: 0° (negative) Tolerance class: M Special features Grade: WMP20G Series: Tiger‑tec Gold Chipbreaker: HU5 Substrate/coating: coated carbide (Tiger‑tec Gold) Application: suitable for stainless steel machining (ISO group M) FAQ What materials is this insert suited for? The SNMM190624-HU5 WMP20G insert from Walter Tools is specified for stainless steel (ISO group M), optimised for medium to robust cutting conditions. How does the HU5 chipbreaker help in turning operations? The HU5 chipbreaker on this Walter Tools insert promotes secure chip control and easier evacuation, which lowers the risk of entanglement and improves process reliability. What advantage does the Tiger‑tec Gold series provide? Tiger‑tec Gold coating enhances wear resistance and edge stability for the WMP20G grade, helping to maintain consistent surface finish and extend effective tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original, brand‑new goods from the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com