SNMX120512-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and robust square geometry for predictable productivity in steel and cast iron machining. Order this insert via Metav Werkzeuge or contact our consultants for application advice. SNMX120512-F57 WKP35G milling insert — Tiger‑tec Gold grade for steel & cast iron, Walter Tools The SNMX120512-F57 WKP35G is a square 90° milling insert engineered for productive machining of steel and cast iron, offering a coated carbide grade designed to balance wear resistance and process reliability. Tiger‑tec Gold coated for long tool life WKP35G grade optimised for steel and cast iron Square 90° geometry with 1.2 mm corner radius F57 chipbreaker for controlled chip formation Maximise machining efficiency with a proven coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G grade delivers a clear benefit: improved wear resistance and a stable cutting edge under common milling conditions. The coating technology reduces flank and crater wear, which translates into longer tool life and fewer indexings. For production environments where cycle time and repeatability matter, this insert helps maintain consistent component tolerances while reducing unplanned tool changes. The result is a measurable increase in process uptime and predictable tool-change intervals. Robust geometry for reliable chip control and edge strength The square 90° form with a 1.2 mm corner radius and a 0° (negative) rake provides a robust cutting edge that tolerates interrupted cuts and variable engagement. The F57 chipbreaker guides chip formation to avoid long, tangled swarf and promotes stable evacuation when machining both steels and cast irons. In practice, this means safer high-feed roughing passes and dependable finishing performance where a consistent surface and dimensional accuracy are required. The geometry is especially suitable for applications needing a compromise between strength and surface quality. Simple integration into existing tooling systems and clear material range With a clear ISO-style designation and a nominal size of 12 mm, the insert fits standard square‑geometry milling cutters that accept SNMX‑type plates. The grade is certified for ISO workpiece groups P and K, meaning it is intended for steel (P) and cast iron (K) applications; this classification helps with tool selection across mixed‑material production runs. As a coated carbide insert, it is compatible with common cutter bodies and clamping systems used in industry, enabling quick retrofits in existing toolsets and straightforward inventory management. Consistent results backed by a recognised tool maker Selecting an insert from a reputable provider ensures access to consistent manufacturing quality and documented performance characteristics. The Tiger‑tec Gold family is designed to give operators and process engineers a balanced solution between productivity and tool life, particularly when machining abrasive or demanding steel and cast iron grades. For production departments seeking to reduce variation and increase output, this insert offers a reliable choice that supports stable cycle times and repeatable surface finishes. Contact Metav Werkzeuge for tailored recommendations on using the Walter Tools SNMX120512-F57 WKP35G insert in specific applications, or request material‑specific cutting data by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data SKU: SNMX120512-F57-WKP35G-WALTER Product: milling insert (indexable) Manufacturer: Walter Tools Facts Size: 12 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness code: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F57 Geometry: Square 90° Execution: X Material suitability: Steel (P), Cast iron (K) Coated carbide cutting material FAQ Which materials is this insert best suited for? The SNMX120512-F57 WKP35G insert is specified for ISO groups P and K, meaning it is designed for machining steel and cast iron, with the coating and grade tuned to handle the thermal and abrasive demands of these groups. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on this WKP35G grade improves wear resistance and stabilises the cutting edge, which helps to extend tool life and maintain consistent part tolerances during longer production runs. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes predictable chip formation and evacuation, reducing the risk of long swarf and improving surface quality, particularly in interrupted cuts or variable engagement common in milling. Is the square 90° geometry suitable for roughing and finishing? Yes. The square 90° format with a 1.2 mm radius provides a robust edge for heavy cuts while still allowing acceptable surface finishes for semi‑finishing and finishing passes when process parameters are adjusted accordingly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX120512-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold coating and the WPP35G grade for extended tool life and predictable machining of steel; precise chip control from the F57 chipbreaker and the robust 0° negative rake ensure stable, productive milling—order directly via Metav Werkzeuge or consult the specialists for application advice. SNMX120512-F57 WPP35G Milling indexable insert – Tiger·tec Gold for steel (Walter Tools) SNMX120512-F57 WPP35G is a square 90° indexable milling insert engineered for productive machining of steel under the ISO P classification Tiger·tec Gold coating for improved tool life Designed for steel machining (ISO P) Square 90° insert with 1.2 mm corner radius Negative 0° rake for stable cutting Reliable performance for steel machining The SNMX120512-F57 WPP35G combines a Tiger·tec Gold coated WPP35G grade with a geometry tuned to steel applications (ISO P). This results in enhanced wear resistance and longer intervals between index changes, which supports higher cumulative productivity on serial and batch production runs. The coated cemented carbide substrate is optimised for the typical heat and chip formation encountered when machining unalloyed and alloyed steel, so cutting parameters remain stable over extended cycles while surface quality is maintained. Predictable chips and stable cutting for higher uptime The integrated F57 chipbreaker and the 0° negative rake produce controlled chip formation and reliable evacuation during milling. For workshops unfamiliar with chipbreaker design: the breaker’s groove directs and segments the chip, reducing entanglement and heat build-up. Together with the square 90° form and 1.2 mm corner radius, this geometry improves edge strength and reduces the risk of unexpected edge chipping, supporting consistent tool life and fewer interruptions for reconditioning. Easy integration into existing milling systems With a nominal insert size of 12 mm and thickness designation 05, the insert fits common toolholders that accept SNMX-designation inserts, enabling straightforward retrofitting into current tooling stocks. The standardised design simplifies tool management and inventory, while the insert’s robustness allows for a wider range of cutting parameters, reducing the need for frequent tool changes. These properties make it suitable for both roughing and semi-finishing operations where process reliability matters. Productivity and brand reliability in everyday production Selecting this Walter Tools grade supports process safety and repeatable results: consistent wear behaviour and a stable cutting edge translate into predictable cycle times and fewer scrapped parts. The combination of a modern coating system and a balanced geometry is aimed at delivering economic machining of steel, reducing downtime and contributing to overall manufacturing efficiency—benefits that are particularly relevant for production-focused workshops and contract manufacturers. Contact Metav Werkzeuge for application-specific guidance on Walter Tools Tiger·tec Gold inserts and to discuss the right SNMX configuration for production requirements: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMX120512-F57-WPP35G-WALTER Product designation: SNMX120512-F57 WPP35G Product type: Milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Size: 12 mm Corner radius: 1.2 mm Thickness: 05 (designation) Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: F57 Grade: WPP35G Coating: Tiger·tec Gold (coated cemented carbide) Insert shape: Square 90° Material suitability: Steel (ISO P) Execution: X FAQ What materials is this insert designed for? The SNMX120512-F57 WPP35G by Walter Tools is designed primarily for steel machining and is classified for ISO P applications, covering unalloyed and alloyed steels. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the SNMX120512-F57 WPP35G improves wear resistance and thermal stability, extending tool life and enabling more consistent performance in steel machining. How does the F57 chipbreaker affect machining? The F57 chipbreaker on this insert promotes segmented, controllable chips, which reduces heat concentration and improves chip evacuation—leading to steadier cutting conditions and fewer interruptions. Can this insert be used for heavy roughing or finishing? Thanks to the 0° negative rake and a 1.2 mm corner radius, the SNMX120512-F57 WPP35G is suited to robust cutting conditions such as roughing, while maintaining edge strength that also allows for semi-finishing operations. Which holders accept this SNMX insert? The insert follows the SNMX designation and standard square 90° geometry, making it compatible with toolholders prepared for SNMX1205-style inserts; toolholder verification is recommended prior to mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original and brand-new from the manufacturer.
SNMX120512-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear protection, a square 90° geometry with a 1.2 mm corner radius, and the dedicated F57 chipbreaker to achieve stable, repeatable performance when machining stainless steel and heat‑resistant alloys. Order directly via Metav Werkzeuge or ask the consultants for material‑specific recommendations to secure reliable tool life and consistent part quality. SNMX120512-F57 WSM35G — Indexable milling insert, Tiger·tec Gold, Walter Tools SNMX120512-F57 WSM35G is a square 90° indexable milling insert designed for demanding machining of stainless steel and heat‑resistant superalloys. Tiger·tec Gold coating for high wear resistance Square 90° form with 1.2 mm corner radius Negative rake 0° for stable cutting F57 chipbreaker for optimised chip control Consistent edge life for demanding materials The SNMX120512‑F57 WSM35G insert is built on the Tiger·tec Gold coating technology and the WSM35G coated‑carbide grade, which together deliver improved wear resistance and micro‑chipping protection during heavy engagement cuts. For components made from stainless steel or nickel‑based superalloys the combination of coating and substrate supports secure chip formation and extends time between indexings. The engineered coating stack reduces adhesive wear and helps maintain a predictable cutting edge, which translates directly into fewer tool changes and steadier manufacturing throughput. Precision geometry for reliable process stability A square 90° plate form with a corner radius of 1.2 mm and a negative rake of 0° provides structural strength and repeatable cutting behaviour under interrupted or climb milling conditions. The insert’s tolerance class M and the specified design enable controlled cutting forces and uniform contact conditions, helping to avoid chatter and to keep surface finish consistent. The geometry also supports conservative chip cross‑sectioning on the shoulder of a part, so machining parameters can be raised with confidence while retaining tool life. Chip control and application scope that reduce downtime The integrated F57 chipbreaker is optimised for the handling of long, stringy chips typical of tough alloys and stainless steel; it promotes short, manageable chips and reduces the risk of entanglement at the tool edge. The grade is specified for material groups S and M, which means suitability for heat‑resistant superalloys, titanium and stainless steel depending on component geometry and cutting strategy. Where process reliability and repeatable surface quality are priorities, this insert supports a more productive machining window and simplifies tooling logistics on multi‑material production lines. For demanding machining of stainless steel and high‑temperature alloys, choose Walter Tools Tiger·tec Gold inserts — contact Metav Werkzeuge for material‑specific advice or stock information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMX120512-F57-WSM35G-WALTER Designation: SNMX120512-F57 ISO designation: SNMX120512-F57 WSM35G Manufacturer: Walter Tools Grade / series: WSM35G, Tiger·tec Gold Material group: S / M Execution: X Tolerance class: M Numbers / Core technical data Plate size: 12 Plate thickness: 05 Corner radius: 1.2 mm Relief angle: 0° (negative) Plate form: Square 90° Chipbreaker: F57 Special features / Versions Coated carbide grade WSM35G Tiger·tec Gold coating technology Suitable for stainless steel and heat‑resistant superalloys and titanium Robust geometry for interrupted cuts Optimised chip control for stringy chips FAQ What materials is this insert suitable for? This SNMX120512‑F57 WSM35G insert is specified for stainless steel and heat‑resistant superalloys (material groups M and S) depending on part geometry. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM35G grade increases wear resistance and reduces edge micro‑chipping during aggressive or high‑temperature cutting with the SNMX120512‑F57 insert. What is the purpose of the F57 chipbreaker? The F57 chipbreaker is designed to produce short, controllable chips when machining tough, ductile materials, improving safety and process stability with SNMX120512‑F57 inserts. Can the square 90° geometry be used for shoulder milling? Yes, the square 90° plate form with its 1.2 mm corner radius offers robust support for shoulder and face milling where a strong cutting edge and repeatable contact are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the brands listed. The offered item is an original, factory‑new product of the manufacturer.
SNMX120512-F57 WSP45G Wendeplatten - Walter Tools
Benefit from a combination of proven Tiger‑tec Gold coating, robust WSP45G grade and compact SNMX120512-F57 geometry for reliable chip control and long tool life; order via Metav Werkzeuge or consult their specialists for application advice. SNMX120512-F57 WSP45G milling insert — Tiger‑tec Gold for milling, Walter Tools The SNMX120512-F57 WSP45G is a square 90° milling insert designed for demanding milling operations, offering a PVD-coated tungsten carbide grade optimised for machining Stahl, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating Versatile for Stahl, rostfreier Stahl and superalloys Square 90° geometry, 1.2 mm corner radius Negative 0° relief angle with F57 chipbreaker Stable cutting performance thanks to advanced grade and coating The combination of the WSP45G grade and Tiger‑tec Gold coating delivers consistent cutting resistance and improved wear behaviour in a wide range of milling tasks. Designed as a PVD-coated carbide, this grade balances toughness and heat resistance to maintain edge stability during interrupted cuts and heavy engagement. As a consequence, production cycles benefit from fewer tool changes and improved process reliability, particularly when machining difficult-to-cut materials such as rostfreier Stahl or high-temperature alloys. The integrated chip control of the insert supports efficient evacuation, reducing rework and machine downtime. Predictable geometry for secure tool life and surface quality The square 90° form and a 1.2 mm corner radius are engineered for rigidity and strength in shoulder and general-purpose milling. The 0° (negative) relief angle increases edge durability under high radial loads, which helps preserve dimensional accuracy on stepped features and shoulders. The F57 chipbreaker is optimised for controlled chip formation across a variety of feeds and depths of cut, enabling stable cutting conditions that directly translate into consistent workpiece finish and longer insert life. These geometric choices make the insert a dependable option where repeatability and surface integrity are priorities. Application suitability and economic advantages in production This insert is tailored for milling workflows that require versatility across materials: the designation covers P (Stahl), M (rostfreier Stahl) and S (superalloys/titanium) groups, allowing one grade to serve multiple operations and reduce tool inventory. The robust edge preparation and coating strategy improve tool-life-per-cut, so total cost per component can be lowered by extending intervals between indexings and replacements. In short production runs or mixed-material scheduling, the grade supports productivity without sacrificing process stability, making it an efficient choice for job shops and production lines alike. For reliable, high-productivity milling with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored application advice and quick availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: SNMX120512-F57-WSP45G-WALTER Part designation: SNMX120512-F57 WSP45G Manufacturer: Walter Tools Product type: Milling insert Grade: WSP45G Series: Tiger‑tec Gold Core data Inscribed circle / size: 12 mm Corner radius: 1.2 mm Plate thickness: 5 mm Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: F57 Coating: Tiger‑tec Gold (PVD) Geometry: Square 90° Material suitability: Stahl; rostfreier Stahl; superalloys / titanium Execution: X FAQ What materials is this insert suitable for? The SNMX120512-F57 WSP45G insert is specified for machining Stahl, rostfreier Stahl and heat-resistant alloys (ISO groups P, M and S) thanks to the WSP45G grade and Tiger‑tec Gold coating. Which operations benefit most from this geometry? Square 90° geometry with a 1.2 mm corner radius is ideal for shoulder milling and general-purpose face milling where rigidity and edge strength are required. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes controlled chip formation across a range of feeds, improving evacuation and reducing the risk of built-up edge, which supports consistent surface quality. Is the relief angle suitable for heavy cuts? Yes — the 0° (negative) relief angle increases edge strength under high radial loads, making the insert suitable for robust milling passes and interrupted cutting. Can this insert reduce tooling variety in a mixed-material shop? The versatile WSP45G grade covers common Stahl and rostfreier Stahl applications and extends to superalloys, allowing consolidation of tool stocks in many production environments. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX120512-F67 WAK15 Wendeplatten - Walter Tools
Benefit from a combination of durable cutting performance and precise chip control for efficient machining of aluminium and other non‑ferrous materials; reliable insert geometry and the proven WAK15 uncoated carbide grade support consistent surface quality and long tool life. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SNMX120512-F67 WAK15 milling insert — 0° negative rake, 1.2 mm corner radius | Walter Tools The SNMX120512-F67 WAK15 is a square 90° milling insert designed for machining aluminium and other non‑ferrous metals, offering a 0° negative rake and a 1.2 mm corner radius for stable, repeatable cutting. Uncoated carbide grade WAK15 for aluminium 0° negative rake for stable cutting Square 90° insert with 1.2 mm radius F67 chipbreaker for clean chip formation Consistent, high‑quality results when machining aluminium The SNMX120512‑F67 WAK15 is engineered for dependable performance in non‑ferrous machining. The WAK15 uncoated carbide composition provides a sharp, abrasion‑resistant cutting edge tailored to aluminium and similar materials, while the F67 chipbreaker prevents long, entangling chips and promotes efficient evacuation. The combination of sharp carbide and focused chip control reduces the risk of material adhesion and burr formation, which leads to improved surface finish and fewer secondary operations. For workshops aiming at predictable throughput, this geometry delivers measurable gains in process stability. Stable cutting action through geometry and rake design The insert’s 0° negative rake increases edge strength and supports secure engagement under interrupted cuts or heavier cross‑feeds, without compromising the quality expected for non‑ferrous components. The square 90° shape and 1.2 mm corner radius distribute cutting forces effectively, making the insert suitable for both shoulder and face milling tasks where robustness is required. These geometric choices reduce vibration and help maintain dimensional accuracy over longer production runs, thereby improving tool life and lowering the frequency of index changes. Practical productivity benefits on the shop floor Integrating this insert into standard milling holders yields straightforward setup and predictable cutting behaviour. The modest plate thickness and compact dimensions facilitate fine step‑downs and close tolerance work, while the optimized chipbreaker geometry supports higher feed rates typical for aluminium machining. As a result, cycle times can be shortened without sacrificing surface quality. The insert’s classification in the Walter N‑series denotes a focus on productive machining of non‑ferrous metals, making it a practical choice for job shops and production lines seeking efficient, repeatable results. Contact Metav Werkzeuge for tailored application advice and to secure the Walter Tools SNMX120512‑F67 WAK15 insert — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: SNMX120512‑F67‑WAK15‑WALTER Product name: SNMX120512‑F67 WAK15 Product type: milling insert Manufacturer: Walter Tools Facts Plate size: 12 mm Corner radius: 1.2 mm Thickness: 0.5 mm Rake angle: 0° (negative) Shape: square 90° Chipbreaker: F67 Tolerance class: M Special features Grade: WAK15 (uncoated carbide) Series: Walter N‑series Material group suitability: N (aluminium, copper, brass) Execution: X Application focus: aluminium and non‑ferrous metals FAQ What materials is this insert optimised for? The SNMX120512‑F67 WAK15 insert is optimised for aluminium and other non‑ferrous metals in line with the Walter N‑series material classification. How does the F67 chipbreaker improve machining? The F67 chipbreaker on this Walter Tools insert shapes chips for secure evacuation and reduced entanglement, enhancing surface finish and process reliability. Is the insert suitable for interrupted cuts? Yes, the 0° negative rake and robust geometry of the SNMX120512‑F67 WAK15 support stable performance under interrupted cutting conditions. What toolholders are compatible with a square 90° insert? Standard square indexable milling holders designed for 90° inserts are compatible; check the holder pocket and clamping style to match the SNMX120512‑F67 geometry. What advantages does the WAK15 grade provide? WAK15 is an uncoated carbide grade formulated for sharpness and reduced material adhesion when machining aluminium, offering reliable edge life for non‑ferrous production tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX120512-F67 WKP25S Wendeplatten - Walter Tools
Take advantage of high process reliability and optimised chip control from a modern coated grade to keep machining stable and economical; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMX120512-F67 WKP25S – Milling indexable insert, Tiger·tec Silver, square 90° (Walter Tools) The SNMX120512-F67 WKP25S is a coated carbide milling insert engineered for reliable machining of steel and cast iron in general milling operations. Tiger·tec Silver coating technology Optimised for steel and cast iron machining Square 90° insert with 1.2 mm corner radius Engineered for consistent productivity and low cost per part The Tiger·tec Silver grade WKP25S combines a coated carbide substrate with a modern coating system to deliver improved wear resistance and stable cutting-edge performance. This results in fewer tool changes and a better cost-per-part ratio during medium- and heavy-duty milling cycles. The combination of a negative rake 0° geometry and a robust cutting edge increases resistance to edge chipping, which is particularly valuable in interrupted cuts and roughing, where tool life directly impacts production flow. The result is predictable performance and reduced downtime in high-throughput environments. Practical benefits on the shop floor: chip control and edge stability The chipbreaker F67 is designed to produce consistent, short chips when machining ferrous materials, improving evacuation and reducing the risk of re-cutting. The square 90° shape and corner radius 1.2 mm provide a stable contact radius for durable engagement in slotting or face milling tasks, while the insert geometry supports secure clamping and indexing. With an insert size 12 mm, this configuration suits a wide range of cutters and pocket types. By improving chip behaviour and edge strength, the insert supports higher average cutting parameters and a steady workpiece surface finish. Compatibility, handling and what the codes mean for application This insert is classified for ISO P/K applications: P for steels (unalloyed and alloyed) and K for cast iron, matching the grade's design for typical heat generation and abrasive wear conditions encountered with those workpiece families. Tolerance class M indicates medium dimensional tolerance, which supports reliable seating in standard cutter pockets while keeping stock control straightforward. The designation SNMX120512-F67 WKP25S identifies the geometry, chipbreaker and grade for replacement ordering and tool management; using matching inserts ensures consistent toolset behaviour and process repeatability. For secure procurement of the Walter Tools Tiger·tec Silver SNMX120512-F67 WKP25S insert and personalised machining recommendations, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and application support Technical data SKU: SNMX120512-F67-WKP25S-WALTER Article: SNMX120512-F67 WKP25S Series: Tiger-tec Silver Grade: WKP25S Manufacturer: Walter Tools Designation without grade: SNMX120512-F67 Facts Corner radius: 1.2 mm Insert size: 12 mm Relief angle: 0° (negative) Thickness code: 05 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: F67 Insert shape: Square 90° Material suitability: Steel (P) and Cast iron (K) Design: Coated carbide, negative rake FAQ What materials is this insert suitable for? The SNMX120512-F67 WKP25S insert is suited for ISO P and K materials, specifically steels and cast iron, matching the WKP25S grade design. How does the F67 chipbreaker affect machining? The chipbreaker F67 promotes short, controlled chips when milling ferrous materials, improving evacuation and reducing the risk of chip entanglement. Why is the negative 0° rake beneficial? A negative rake 0° geometry provides a stronger cutting edge and increased robustness in interrupted cuts, which enhances reliability during roughing. What does tolerance class M mean for tool fitting? Tolerance class M denotes medium dimensional tolerance, ensuring consistent seating in standard cutter pockets and predictable repeatability for the insert. Which advantages does the Tiger·tec Silver coating bring? The Tiger·tec Silver coating increases wear resistance and thermal stability, contributing to longer tool life and improved process stability with the SNMX120512-F67 WKP25S insert. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX120512-F67 WKP35G Wendeplatten - Walter Tools
Best combination of wear resistance and stable chip control for reliable milling productivity, paired with the proven Tiger‑tec Gold coating and grade WKP35G for efficient machining of steel and cast iron. Order directly through Metav Werkzeuge or consult for application-specific advice. SNMX120512-F67 WKP35G Milling indexable insert — Tiger‑tec Gold coating, for steel and cast iron | Walter Tools SNMX120512-F67 WKP35G is a precision milling insert designed for medium to heavy milling in steels and cast irons, offering wear-resistant coating and robust edge strength for productive machining. Tiger‑tec Gold coating for extended tool life Grade WKP35G optimised for steel and cast iron 0° negative rake for secure cutting geometry Square 90° shape with 1.2 mm corner radius Consistent productivity through advanced coating technology The combination of a coated carbide substrate and the Tiger‑tec Gold technology ensures a measurable improvement in tool life under typical milling loads. The engineered coating reduces abrasive wear and supports stable edge condition over longer cycles, which in practice means fewer tool changes and higher uptime on the machine. By favouring a coating system matched to interrupted and continuous chip conditions, the insert provides predictable performance across a wide range of alloyed and unalloyed steels as well as cast irons, supporting steady production and lower unit machining cost. Robust geometry for controlled chips and reliable edges A square 90° outline paired with a 1.2 mm corner radius and chipbreaker F67 creates a balance between edge strength and chip control. The 0° negative relief increases the insert’s mechanical robustness, making it suitable for operations where tool support and resistance to mechanical shock are priorities. These geometrical choices reduce the risk of edge chipping during heavy cuts and enable consistent surface results; the chipbreaker assists in forming short, manageable chips when machining abrasive cast irons or ductile steels, improving process stability and reducing downtime for chip clearance. Application guidance and standards-based suitability Allocated to ISO material groups P and K, the insert is suitable for machining a broad spectrum of steels and cast irons in accordance with ISO 513 classifications. The WKP35G grade provides a coated hardmetal solution optimised for these groups, which helps when selecting tooling for mixed production runs. The insert’s tolerance class M and its standardised ISO designation support interchangeability in toolholders and simplify inventory management. For specific cutting data and clamping recommendations, consult tooling documentation to match machine power, fixture rigidity and coolant strategy to the insert’s capabilities. Contact Metav Werkzeuge for application advice or to secure the SNMX120512-F67 WKP35G insert for your production line — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: SNMX120512-F67-WKP35G-WALTER Label: Fräswendeschneidplatte SNMX120512-F67 WKP35G Walter Tools Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G ISO designation: SNMX120512-F67 WKP35G Material group: P / K Core technical data Insert size: 12 mm Thickness: 0.5 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: F67 Tolerance class: M Version: X Special features Coated hardmetal grade (Tiger‑tec Gold) Optimised for steels (P) and cast irons (K) Square 90° plate form Stable chip formation and edge strength Designed for productive milling applications FAQ What materials is this insert suitable for? The SNMX120512-F67 WKP35G insert is engineered for steel and cast iron applications (ISO groups P and K) using its coated WKP35G grade and Tiger‑tec Gold technology. How does the chipbreaker affect machining? The F67 chipbreaker on this Walter Tools insert promotes short, controllable chips and helps maintain stable cutting forces, which is beneficial when machining both ductile steels and abrasive cast irons. Is the insert compatible with standard toolholders? The ISO designation and tolerance class M ensure the insert fits standard milling indexable toolholders designed for SNMX form inserts; verify holder specification before mounting. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance and thermal stability, extending usable tool life and improving process reliability under varied milling conditions. Can this insert be used for finishing and roughing? The insert’s robust geometry and coated grade make it suitable for a range of milling tasks; specific application (roughing or finishing) should be determined by cutting data, machine rigidity and desired surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are used for explanation only and imply no affiliation with or endorsement by the trademark owners. The item offered is an original, brand-new product from the manufacturer. The Walter brand is mentioned where relevant. The Walter AG (brand: Walter Tools) is part of the global toolmaking community and a recognised supplier of precision tools for metalworking.
SNMX120512-F67 WPP35G WPP35G Wendeplatten - Walter Tools
SNMX120512-F67 WPP35G Fräswendeschneidplatte von Walter Tools SNMX120512-F67 WPP35G ist eine beschichtete Fräswendeschneidplatte für effiziente Stahlzerspanung mit Tiger·tec Gold-Technologie. SNMX120512-F67 WPP35G von Walter Tools Tiger·tec Gold: beschichtetes Hartmetall Speziell ausgelegt für Stahl (Werkstoffgruppe P) Quadratische Form 90° mit Eckenradius 1,2 mm Spanformer F67 für stabile Spanbildung Höhere Prozesssicherheit durch Tiger·tec Gold-Beschichtung Die Kombination aus beschichtetem Hartmetall und der Tiger·tec Gold-Technologie sorgt für beständige Schneidkanten und verlängerte Standzeit. Die Wendeschneidplatte SNMX120512-F67 WPP35G bietet dadurch konstante Bearbeitungsergebnisse bei erhöhten Schnittparametern, was Rüstzeiten reduziert und die Produktivität steigert. Anwender in Serienfertigung profitieren von gleichbleibender Oberflächenqualität und planbaren Werkzeugzyklen. Optimiert für Stahl: Spanbildung und Schneidgeometrie Der integrierte Spanformer F67 und der negative Freiwinkel von 0° fördern eine kontrollierte Spanabfuhr und reduzierte Schnittkräfte beim Zerspanen von Stahl. Die quadratische Plattenform 90° mit einem Eckenradius von 1,2 mm erlaubt vielseitige Einsatzfälle in der Fräsbearbeitung und unterstützt stabile Schnitttiefen. Dadurch eignen sich die Platten besonders für Lohnfertiger und Produktionslinien mit hohem Durchsatz. Wirtschaftlichkeit durch präzise Abmessungen und Toleranz Mit Toleranzklasse M und standardisierten Abmessungen stellt diese Wendeschneidplatte eine einfache Integration in gängige Werkzeugaufnahmen sicher. Die robuste Ausführung reduziert Werkzeugwechsel und Stillstandszeiten, was die Gesamtkosten pro Werkstück senkt. Die technische Auslegung ist auf effizienten Materialabtrag bei gleichzeitiger Schonung der Schneidkante ausgelegt. Empfehlung: Für zuverlässige und produktive Stahlzerspanung SNMX120512-F67 WPP35G direkt über Metav Werkzeuge beziehen; technische Beratung und Bestellhilfe per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930. Produktmerkmale Artikelnummer: SNMX120512-F67-WPP35G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Ausführung: X Daten Plattengröße: 12 Plattendicke: 05 Eckenradius: 1,2 mm Freiwinkel: 0° (negativ) Besonderheiten Spanformer: F67 Plattenform: Quadrat 90° Toleranzklasse: M Schneidstoff: beschichtetes Hartmetall (Tiger·tec Gold) Bearbeitbare Werkstoffe: Stahl (Werkstoffgruppe P) FAQ Wie unterscheidet sich die SNMX120512-F67 WPP35G von anderen Wendeschneidplatten? Die SNMX120512-F67 WPP35G kombiniert eine Tiger·tec Gold-Beschichtung mit einem speziellen Spanformer F67, was bessere Standzeiten und konstante Spanbildung bei der Stahlbearbeitung ermöglicht. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die Wendeschneidplatte ist primär für Stahl ausgelegt (Werkstoffgruppe P) und wurde für typische Wärmeentwicklung und Spanbildung beim Zerspanen von unlegierten und legierten Stählen optimiert. Welche Vorteile bringt die quadratische Plattenform? Die quadratische Form 90° bietet vier Schneidkanten pro Platte und ermöglicht dadurch wirtschaftlichen Einsatz, einfache Indexierung und hohe Standzeit gegenüber ein- oder zweischneidigen Geometrien. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. Hersteller: Walter Tools; Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns.
SNMX120512-F67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the robust WSM35G grade for reliable chip control and extended edge life when machining stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMX120512-F67 WSM35G milling insert — Tiger·tec Gold, 0° negative rake, for stainless steel and superalloys (Walter Tools) A SNMX120512-F67 WSM35G milling insert engineered to ensure secure chip formation and stable cutting edges when machining rostfreie Stähle and heat‑resistant superalloys or titanium. Tiger·tec Gold coating for wear resistance Optimised for stainless steel and superalloys Square 90° geometry for robust milling Corner radius 1.2 mm for edge stability 0° negative rake for heavy engagement Reliable cutting performance for difficult materials The WSM35G grade is a coated carbide developed for demanding applications in the M and S material groups — notably rostfreie Stähle and heat‑resistant superalloys/titanium. The Tiger·tec Gold technology combines a wear‑resistant coating with a substrate balanced for toughness and thermal stability, which translates into improved tool life and consistent process security. For operations where built‑up edge, high temperatures and poor thermal conductivity challenge productivity, this grade supports secure chip control and repeatable results. Geometry and edge preparation that boost stability The insert’s square 90° geometry and 1.2 mm corner radius create a robust cutting edge suited to heavier radial loads and interrupted cuts. The 0° negative relief increases edge strength by reducing the effective rake, so the tool withstands higher cutting forces without premature chipping. Combined with the F67 chipbreaker, the design promotes fragmenting and evacuating chips reliably even when cutting sticky stainless grades; the result is lower risk of rework and improved surface integrity on the finished component. Integration into production for higher uptime Specified as an indexable milling insert, this component is intended for efficient tool management and predictable replacement cycles. The sturdy geometry and coated surface mean fewer tool changes and more consistent cycle times — a direct contribution to higher overall productivity. The insert supports manufacturers seeking reproducible quality and process stability; when paired with optimised cutting parameters it helps reduce scrap rates and improves machining confidence on challenging alloys. For tailored machining recommendations and current availability of the Walter Tools SNMX120512-F67 WSM35G Tiger·tec Gold insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists provide application advice and support for process integration Technical Data SKU: SNMX120512-F67-WSM35G-WALTER Designation: SNMX120512-F67 WSM35G Product type: Milling insert (indexable) Series: Tiger·tec Gold Grade: WSM35G Manufacturer: Walter Tools Facts Insert size: 12 Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: F67 Plate thickness code: 05 Geometry: Square 90° Tolerance class: M Execution: X Special features Coating: Tiger·tec Gold (coated carbide) Material groups: S / M (heat‑resistant superalloys / stainless steels) Application focus: Heavy machining of difficult‑to‑cut materials and, depending on geometry, stainless steel Stable chip formation and optimised chip control FAQ What materials is this insert suitable for? The SNMX120512-F67 WSM35G insert is specified for material groups M and S — mainly rostfreie Stähle and heat‑resistant superalloys or titanium. How does the 0° negative relief affect cutting? A 0° negative relief increases edge strength and resistance to chipping; the SNMX120512-F67 geometry is therefore suited to heavy engagement and interrupted cuts. Which chipbreaker does the insert use and why does that matter? This insert features the F67 chipbreaker, which is designed to promote controlled fragmentation and efficient chip evacuation when machining sticky stainless grades and high‑temperature alloys. Can the insert be used for finishing as well as roughing? The robust square 90° geometry and 1.2 mm corner radius favour stable roughing and semi‑finishing; finishing performance depends on machine setup and cutting parameters. What series and coating technology does this grade employ? The grade belongs to the Tiger·tec Gold series, a coated carbide technology that balances wear resistance and toughness for reliable tool life. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SNMX120512-F67 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating, a versatile WSP45G grade for P / M / S materials and a robust 1.2 mm corner radius for reliable production results; order the SNMX120512-F67 WSP45G directly via Metav Werkzeuge or ask our consultants for process recommendations. SNMX120512-F67 / SNMX120512-F67 WSP45G / WSP45G Milling indexable insert, Tiger·tec Gold grade for P/M/S — Walter Tools The SNMX120512-F67 WSP45G is a square 90° milling indexable insert engineered for robust face and shoulder milling across P (Stahl), M (rostfreier Stahl) and S materials Tiger·tec Gold PVD-coated grade WSP45G Suitable for P / M / S materials Square 90° insert, 1.2 mm corner radius Negative 0° rake for enhanced edge support Higher process reliability through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade gives a PVD-coated carbide body that is optimised for secure cutting performance. This configuration supports stable chip formation when machining a broad range of ferrous and high-temperature alloys — listed here as P (Stahl), M (rostfreier Stahl) and S (superalloys and titanium). The result is fewer unplanned tool changes and more consistent cycle times, which directly benefits shop-floor productivity and the predictability of manufacturing output. Robust edge geometry for demanding milling tasks A 1.2 mm corner radius combined with a Square 90° form and chipbreaker F67 provides a balance between strength and surface quality. The negative 0° relief offers additional edge support under heavier radial loads and in interrupted cutting conditions; the F67 chipbreaker is designed to control chip flow and reduce the risk of built-up edge. These characteristics suit applications where edge stability and controlled chip evacuation are decisive for part quality and tool life. Designed for versatility and predictable tool life The WSP45G insert is positioned as a tough, multi-purpose grade within the Tiger·tec technology family, aiming to deliver process security across varied batches and material mixes. The insert geometry and the PVD finish help to limit flank wear and maintain a consistent cutting edge, supporting longer tool life and fewer indexings. Walter Tools’ engineering focus on repeatable performance contributes to lower production interruptions and a more economical machining cycle overall. Practical selection and application notes for toolsetters The SNMX120512-F67 WSP45G is suited to standard milling toolholders accepting square 90° inserts and is effective for operations that demand a robust edge rather than a fine radius finish. For series production in mixed-material runs, the combination of chipbreaker F67 and the WSP45G grade helps to harmonise chip behaviour and maintain component quality. For specification matching, parameter optimisation or holder compatibility, Metav Werkzeuge can provide targeted advice and machining parameter ranges. Contact Metav Werkzeuge for tailored technical advice on Walter Tools Tiger·tec Gold inserts or to request a quotation by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SNMX120512-F67-WSP45G-WALTER Designation: SNMX120512-F67 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Size: 12 Thickness: 05 Corner radius: 1.2 mm Relief angle: 0° (negative) Insert form: Square 90° Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Material suitability: P / M / S Chipbreaker: F67 Execution: X Plate designation: SNMX120512-F67 FAQ What materials can this insert machine effectively? The SNMX120512-F67 WSP45G milling indexable insert by Walter Tools is specified for P (Stahl), M (rostfreier Stahl) and S (superalloys and titanium) applications and is optimised to handle the characteristic heat and chip formation of these groups. What benefit does the chipbreaker F67 provide? The chipbreaker F67 on the SNMX120512-F67 WSP45G helps to shape and control chip flow, reducing the likelihood of tangling and promoting consistent evacuation during milling operations. How does the 1.2 mm corner radius affect machining results? A 1.2 mm corner radius increases edge strength and resistance to chipping, which is beneficial for heavier cuts and interrupted milling; the SNMX120512-F67 WSP45G therefore offers improved robustness for demanding operations. Is the insert suitable for interrupted cuts? Yes, the combination of a negative 0° relief and the robust grade of the SNMX120512-F67 WSP45G supports edge stability in interrupted cutting scenarios. Which series and coating technology does this grade belong to? The insert is part of the Tiger·tec Gold series and uses a PVD-coated WSP45G grade developed for versatile milling performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX120520-D27 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, long wear life and straightforward indexability for consistent production results; order the SNMX120520-D27 WKK25G insert directly via Metav Werkzeuge or consult our team for application advice. SNMX120520-D27 WKK25G milling indexable insert – Tiger·tec Gold for cast iron The SNMX120520-D27 WKK25G is a square milling indexable insert designed for productive machining of cast iron, offering a Tiger·tec Gold coated carbide grade and a chipbreaker for controlled swarf flow Tiger·tec Gold coated carbide grade WKK25G Optimised for cast iron machining K group Square 90° form with corner radius 2 Chipbreaker D27 for stable chip control Reliable performance for abrasive cast iron work The Tiger·tec Gold coating combined with the WKK25G grade delivers a balance between wear resistance and toughness that is particularly suited to abrasive cast iron materials. The insert is a coated carbide solution developed to tolerate the short, often brittle chips typical of castings while maintaining a stable cutting edge. This results in fewer interruptions for tool changes and a reduction in unexpected downtime. The design supports steady metal removal rates and helps to maintain component tolerances over longer tool lives, which contributes to predictable cycle times in production environments. Improved chip control and edge stability for safer machining Engineered with a negative 0° rake and a chipbreaker D27, the insert controls chip formation and evacuation to reduce the risk of recutting and tool damage. The square 90° geometry and corner radius 2 provide robust edge support for interrupted cuts and roughing operations, increasing resistance to mechanical shock. These features mean the insert performs reliably in demanding milling tasks, offering consistent surface quality and repeatable results when used with appropriate feeds and speeds for cast iron applications. Practical selection and process benefits on the shop floor Marked tolerance class M and the execution code X indicate measured production tolerances and a standardised fit for clamping systems, simplifying inventory matching and tool change routines. The insert’s size code and design facilitate quick identification and replacement in modular toolholders, lowering setup time between jobs. For operations seeking to improve throughput while containing tooling costs, the combination of Tiger·tec Gold technology and a geometry optimised for cast iron provides measurable gains in productivity and tool life without complex process changes. Contact Metav Werkzeuge for delivery details and tailored machining recommendations for the Walter Tools SNMX120520-D27 WKK25G insert: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMX120520-D27-WKK25G-WALTER Product designation: Fräswendeschneidplatte Manufacturer: Walter Tools Numbers / Core technical data Plate size: 12 Corner radius: 2 Thickness code: 05 Free angle: 0° (negative) Tolerance class: M Special features / Versions Grade: WKK25G Series: Tiger·tec Gold Material application: K (cast iron) Chipbreaker: D27 Plate form: Quadrat 90° Execution: X Coated carbide FAQ What materials is this insert intended for? The SNMX120520-D27 WKK25G insert is optimised for machining cast iron (material group K) and is designed to handle the abrasive wear and short chip form typical of those workpieces. What advantages does the Tiger·tec Gold grade provide? Tiger·tec Gold enhances wear resistance and edge stability on the WKK25G grade, giving the insert longer life and consistent performance in demanding milling of cast iron components. How does the chipbreaker D27 affect machining? The D27 chipbreaker on this insert promotes controlled chip formation and evacuation, reducing the likelihood of recutting and improving surface finish consistency during milling operations. What do the codes 05 and M indicate? The thickness code 05 refers to the plate thickness designation used for tool matching; tolerance class M denotes the manufacturing tolerance level, aiding correct fit and repeatable positioning in toolholders. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMX120520-D27 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP25S grade for stable chip formation and extended tool life; the square 90° geometry with a corner radius of 2 and chipbreaker D27 ensures reliable performance when machining steel and cast iron. Order the SNMX120520-D27 WKP25S milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNMX120520-D27 WKP25S — milling indexable insert with Tiger·tec Silver for steel & cast iron | Walter Tools The SNMX120520-D27 WKP25S is a square 90° milling indexable insert developed for productive machining of steel and cast iron, combining a coated carbide grade with a chipforming geometry suited to general industrial milling applications. Tiger·tec Silver coated grade for longer tool life Suitable for steel and cast iron machining Square 90° insert with corner radius 2 0° negative rake for robust cutting Reliable performance through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP25S grade delivers a balanced mix of wear resistance and toughness. This coated carbide formulation is optimised for the thermal and mechanical loads typical of cutting steel and cast iron (ISO groups P and K), so the insert maintains a stable cutting edge under sustained industrial use. The result is predictable tool life and consistent surface quality, which supports efficient production planning and reduced downtime. The chemical and physical functions of the coating improve abrasion resistance while preserving edge strength, helping to extend interval lengths between indexings. Geometry that improves stability and chip control A square 90° plate form with a corner radius of 2 and a 0° (negative) relief angle gives this insert mechanical robustness in face and shoulder milling operations. The integrated chipbreaker D27 is tuned to promote secure chip control when machining medium to heavy cuts in steel and cast iron, reducing the risk of recutting and improving process security. The insert’s geometry enhances fixture stability and supports higher material removal rates without sacrificing repeatability, making it suitable in both batch production and continuous machining contexts where tool reliability is essential. Practical benefits for production and tool management Using this indexable solution cuts preparation time and simplifies inventory: the standardised format and recognised grade facilitate quick replacement and straightforward sorting in tool rooms. The insert’s design supports cost-effective machining by balancing tool life with cutting performance; fewer interventions are needed and the reliable chip control reduces machine interruptions. For operations seeking consistent results across a range of ferrous workpieces, this insert offers a sound compromise between productivity and service life while integrating easily into established tool setups. For technical advice on optimising the Walter Tools SNMX120520-D27 WKP25S Tiger·tec Silver insert in specific machining tasks and to arrange purchase through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMX120520-D27-WKP25S-WALTER Designation: SNMX120520-D27 WKP25S Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Execution: X ISO designation: SNMX120520-D27 WKP25S Facts Free angle: 0° Corner radius: 2 Plate form: Square 90° Plate size: 12 Plate thickness: 05 Tolerance class: M Special features Coating/technology: Tiger·tec Silver Coated carbide grade: WKP25S Chipbreaker: D27 Material suitability: P (steel), K (cast iron) Robust geometry for productive milling FAQ What materials is this insert suitable for? The SNMX120520-D27 WKP25S by Walter Tools is intended for machining steel (ISO group P) and cast iron (ISO group K); the WKP25S grade and Tiger·tec Silver coating are optimised for these materials. What does the D27 chipbreaker provide? The D27 chipbreaker on this insert promotes controlled chip formation and evacuation during milling, improving process stability when the SNMX120520-D27 WKP25S is used in typical industrial cutting conditions. How does the 0° negative relief angle affect cutting? A 0° (negative) relief increases edge strength and resistance to mechanical shock, making the insert more robust for interrupted cuts and heavier milling loads. Is the insert suitable for shoulder and face milling? Yes. The square 90° plate form with a corner radius of 2 gives solid support for shoulder and face milling applications while maintaining good edge stability. What benefits does Tiger·tec Silver bring to the tool life? Tiger·tec Silver coating enhances wear resistance and thermal stability of the WKP25S grade, which together contribute to longer, more predictable tool life and consistent cutting results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanation only. There is no affiliation between our company and the named brands. The offered item is original, new from the manufacturer.
SNMX120520-D27 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating, robust square 90° geometry and suitability for both steel and cast iron to increase machining reliability and tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application support. SNMX120520-D27 WKP35G SNMX120520-D27 WKP35G – Indexable milling insert, Tiger·tec Gold, for Steel and Cast iron by Walter Tools SNMX120520-D27 WKP35G is a square 90° indexable milling insert engineered for high-productivity milling of steel and cast iron in industrial machining environments Tiger·tec Gold coated for long tool life Designed for steel (P) and cast iron (K) Square 90° geometry with 2 mm corner radius Negative rake 0° for robust cutting Consistent chip control and longer tool life for heavy-duty milling The coated carbide grade from the Tiger·tec Gold family provides a balance of thermal stability and wear resistance that supports continuous operation in mixed-production environments. By combining a coated carbide substrate with a modern coating stack, the insert promotes stable chip formation and reduces flank wear, which translates directly into fewer tool changes and higher machine utilisation. This behaviour is particularly beneficial when machining unalloyed and alloyed steels as well as grey and ductile cast irons, where heat and abrasive wear are common challenges. The construction reduces unexpected downtime and supports predictable process windows. Geometry engineered for secure cutting and repeatable results A square 90° layout with a 2 mm corner radius and a negative 0° rake delivers a sturdy cutting edge that resists chipping under interrupted cuts and heavy engagement. The insert’s robust geometry improves stability in shoulder milling and face milling operations, where edge strength and repeatability are crucial for maintaining tolerances and surface finish. The design is suited to a range of tool holders and cutter bodies, enabling straightforward integration into existing milling systems while preserving cutting parameters that favour productivity. Practical benefits in production: process reliability and material coverage The grade WKP35G is a coated cemented carbide developed for the ISO P and K groups, offering broad material coverage between steel and cast iron applications. In practice, this means fewer grade changes across diverse job lots and improved stock-to-stock consistency. The insert’s chipbreaker designation and dimensional form support efficient chip evacuation, which helps maintain surface quality and reduces rework. For operators seeking dependable performance in batch production or single-piece flow, this solution provides a measurable uplift in machining stability and edge life. For tailored cutting data, availability checks or to secure the Walter Tools Tiger·tec Gold SNMX120520-D27 WKP35G for upcoming production runs, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and prompt handling Technical Data Article number: SNMX120520-D27-WKP35G-WALTER Name: Fräswendeschneidplatte SNMX120520-D27 WKP35G Series: Tiger-tec Gold Grade: WKP35G Geometry: Square 90° Corner radius: 2 mm Facts Plate size: 12 Thickness: 05 Free angle: 0° (negative) Chipbreaker: D27 Tolerance class: M Special features Coated carbide grade (Tiger·tec Gold) Material suitability: Steel (P), Cast iron (K) Execution code: X Square 90° plate form Application focus: milling indexable insert FAQ What materials is this insert intended for? The SNMX120520-D27 WKP35G is designed primarily for steel (ISO group P) and cast iron (ISO group K), matching the WKP35G grade characteristics. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances thermal resistance and wear protection, improving edge life and enabling more consistent chip formation under varied cutting conditions. Which geometry benefits typical milling operations? The square 90° form with a 2 mm corner radius and negative 0° rake provides a robust edge for shoulder and face milling where high engagement and interrupted cuts occur. Is this insert suitable for mixed-production environments? Yes, the combination of a versatile WKP35G grade and the Tiger·tec Gold coating makes the insert well suited to mixed runs covering both steel and cast iron components. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Brand names and trademarks are the property of their respective owners. The offered article is an original factory-new product.
SNMX120520-D27 WPP35G WPP35G Wendeplatten - Walter Tools
Combine reliable chip control and the wear-resistant Tiger·tec Gold grade for efficient steel machining; benefit from the square 90° form and 2 mm corner radius for repeatable edge life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMX120520-D27 SNMX120520-D27 WPP35G milling indexable insert, Tiger·tec Gold, for steel — Walter Tools A SNMX120520-D27 WPP35G milling insert designed for steel machining with Tiger·tec Gold coated carbide, square 90° form and a negative 0° clearance angle for stable, versatile cutting in ISO P applications Tiger·tec Gold coating for extended tool life Designed for ISO P (steel) machining Square 90° form with 2 mm corner radius Negative 0° clearance for robust cutting Built for reliable steel machining with coated carbide technology This insert uses the Tiger·tec Gold coating in the WPP35G grade, a coated carbide designed specifically for steel (ISO P). The coating and substrate combination promote stable chip formation and improved wear resistance under the thermal and mechanical loads typical of steel machining. For shops seeking predictable performance, the grade balances toughness and hardness to cope with both universal and tougher cutting conditions, reducing the frequency of tool changes and supporting consistent cycle times. Precision geometry that supports stable cutting and surface quality The square 90° plate geometry and 2 mm corner radius provide a defined cutting edge suitable for a wide range of slotting and face-milling operations. The 0° (negative) clearance angle increases cutting edge robustness, while the integrated chipbreaker D27 helps control swarf and reduces the risk of built-up edge during moderate to heavy machining. These geometric choices result in improved process reliability and a consistent surface finish, especially when machining unalloyed and alloyed steels. Productivity and process benefits for everyday production By combining a proven coating system with optimised geometry and a tolerance class that supports repeatable mounting, this insert contributes to longer tool life and reduced downtime. The WPP35G grade aims for a broad material coverage within steels, helping to simplify tool inventories and decrease tooling complexity. For procurement and production planning, the insert offers measurable advantages in tool longevity and consistent part quality, which together support lower unit machining costs and steadier throughput. For tailored advice on integrating Walter Tools' Tiger·tec Gold inserts into production, contact Metav Werkzeuge for technical consultation and fast supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: SNMX120520-D27-WPP35G-WALTER SKU: SNMX120520-D27-WPP35G-WALTER Designation: SNMX120520-D27 WPP35G Manufacturer: Walter Tools Core technical data Series: Tiger·tec Gold Grade: WPP35G Material group: P (Steel) Plate form: Square 90° Corner radius: 2 mm Clearance angle: 0° (negative) Chipbreaker: D27 Size: 12 Thickness: 05 Tolerance class: M Execution: X Special features Coated cemented carbide insert Intended for steel machining per ISO 513 Stable chip formation and broad material coverage Optimised for productive cutting in mixed conditions FAQ Which materials can be machined with this insert? The SNMX120520-D27 WPP35G insert is specified for ISO P materials, meaning it is tailored for machining unalloyed and alloyed steel grades. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP35G grade offers improved wear resistance and stable cutting performance, which helps extend tool life and maintain consistent machining cycles. What are the key geometric features to note for setup? The insert features a square 90° shape, 2 mm corner radius and a 0° (negative) clearance angle, which together deliver robust edge strength and controlled chip formation for face and slot milling. How does the chipbreaker influence performance? The integrated chipbreaker D27 assists in producing shorter, manageable chips and reduces the risk of built-up edge, supporting cleaner machining and easier chip evacuation in steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, factory-new goods of the manufacturer.
SNMX120520-F57 WKK25G Wendeplatten - Walter Tools
Take advantage of high wear resistance and stable chip control to maintain productive milling of cast iron components; the combination of the Tiger‑tec Gold grade and the WKK25G substrate ensures consistent edge life and reproducible part quality. Order directly via Metav Werkzeuge or ask the consultants for tailored recommendations. SNMX120520-F57 WKK25G — Milling insert for cast iron (Tiger‑tec Gold) by Walter Tools SNMX120520-F57 WKK25G is a square milling indexable insert designed for productive machining of cast iron components, featuring a Tiger‑tec Gold coating and a negative 0° relief angle. Tiger‑tec Gold coating for wear resistance Optimised chipformer F57 for cast iron chips Square 90° geometry with 2 mm corner radius Negative 0° relief angle for robust milling Durable wear protection for abrasive cast iron milling The Tiger‑tec Gold coating combined with the WKK25G grade delivers high abrasion resistance tailored to the short, brittle chips typical of cast iron. This insert is a coated carbide design optimised to reduce flank and crater wear, which translates into longer tool life and fewer tool changes on milling operations. The result is improved process stability and more predictable tool consumption in series production. Reliable chip control and stable cutting performance Equipped with the F57 chipformer, the insert shapes and breaks chips effectively during interrupted or continuous milling of grey and nodular cast irons. Controlled chip formation reduces the risk of built‑up edge and coolant interruptions, enabling consistent surface quality and safer chip evacuation in milling fixtures. The combination of chipbreaker geometry and coating creates a measurable productivity gain when machining abrasive cast iron alloys. Robust geometry for demanding milling conditions The square 90° form with a 2 mm corner radius and a negative 0° relief angle makes this insert particularly suited to heavy‑duty face and shoulder milling where cutting forces are high. The geometry provides a secure seating and a strong cutting edge that resists chipping under load, decreasing the frequency of indexing and supporting higher metal removal rates while maintaining dimensional accuracy. Application guidance and process benefits This insert is primarily intended for machining cast iron according to ISO group K; it is not specified for stainless or hardened steels. When matched with appropriate cutter bodies and cutting data, the grade and coating support a cost‑effective balance between tool life and productivity. For versatile setups in production environments, the insert offers reproducible results and easier integration into existing milling strategies. Contact Metav Werkzeuge for specific application advice on SNMX120520-F57 WKK25G and to check current availability and suitable cutter body combinations Technical data Article number/SKU: SNMX120520-F57-WKK25G-WALTER Label: Fräswendeschneidplatte SNMX120520-F57 WKK25G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Product type: Milling indexable insert ISO designation: SNMX120520-F57 WKK25G Facts and measurable data Plate form: Square 90° Relief angle: 0° (negative) Corner radius: 2 mm Plate size: 12 mm Plate thickness: 05 Chipbreaker: F57 Tolerance class: M Execution: X Special features and applicability Coating technology: Tiger‑tec Gold Material group suitability: Cast iron (K) Designed for productive machining and abrasion resistance Stable chip control for short, brittle chips FAQ What materials is this insert intended for? The insert is optimised for machining cast iron (ISO group K); the Tiger‑tec Gold grade and chipformer F57 are tuned to handle abrasive, short‑breaking chips in these materials. How does the negative 0° relief angle affect performance? A negative 0° relief angle gives a robust edge to the insert, improving resistance to chipping under heavy cuts and supporting stable milling in demanding applications. Can the SNMX120520-F57 WKK25G be used for finishing passes? While the insert excels in productive and heavy‑duty milling of cast iron, controlled finishing can be achieved by adjusting cutting parameters and using appropriate machine rigidity; consult tooling data for optimal feeds and speeds. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances abrasion resistance and extends tool life in abrasive workpiece materials, contributing to fewer tool changes and greater process uptime. Is the insert compatible with standard square milling cutter bodies? The insert conforms to common square‑indexed geometries and is compatible with cutter bodies designed for SNMX‑style inserts; ensure correct seat and clamping for safe operation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer. The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
SNMX120520-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust WKP25S grade for stable chip control and broad material coverage; order the insert via Metav Werkzeuge or contact our consultants for specification support. SNMX120520-F57 WKP25S milling indexable insert by Walter Tools – Tiger·tec Silver, for steel and cast iron SNMX120520-F57 WKP25S is a square milling insert designed for reliable metalcutting in steel (P) and cast iron (K), offering a balance of wear resistance and toughness for productive machining. Tiger·tec Silver coating technology Grade WKP25S for steel and cast iron Square 90° insert with 2 mm corner radius Negative 0° rake for robust cutting Increased throughput with optimised coating and grade The combination of Tiger·tec Silver coating and the WKP25S carbide grade delivers a proven mix of wear resistance and toughness that supports longer tool life in serial production. Designed for the demands of steel and cast iron, the coating reduces abrasion and thermal wear while the grade maintains a strong cutting edge. This results in fewer indexings and lower downtime, which directly improves process efficiency and contributes to predictable production output. Consistent chip control and edge security for stable results Equipped with chipbreaker F57 and a negative 0° rake, the geometry promotes controlled chip formation under varying cutting conditions. The negative rake strengthens the cutting edge against impact and chipping, which is particularly beneficial for interrupted cuts or tougher cast materials. With tolerance class M the insert supports repeatable positioning in indexable holders, helping to maintain consistent surface quality and dimensional stability across batches. Secure clamping and versatile milling performance The square 90° insert form and corner radius 2 deliver a robust seating and cutting footprint, which aids in load distribution and resistance to edge breakdown. The standard size and thickness 05 combine stiffness with adaptability for a range of milling operations where stable engagement is required. The SNMX120520-F57 WKP25S insert is therefore suited to applications that prioritise reproducible performance and straightforward specification matching for mixed steel and cast-iron workloads. Discuss Tiger·tec Silver inserts from Walter Tools with Metav Werkzeuge to match the correct WKP25S grade and geometry for the intended milling application — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and availability Technical data SKU: SNMX120520-F57-WKP25S-WALTER Designation: SNMX120520-F57 ISO designation: SNMX120520-F57 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Numeric data Size: 12 Thickness: 05 Corner radius: 2 Rake angle: 0° (negative) Tolerance class: M Design / Special features Grade: WKP25S Chipbreaker: F57 Insert shape: Square 90° Applicable materials: P / K (steel, cast iron) Execution: X FAQ Which materials is this insert intended for? The SNMX120520-F57 WKP25S insert is intended primarily for steel (P) and cast iron (K) applications, matching the designation of the grade. What does the WKP25S grade mean? WKP25S is a Walter Tools coated carbide grade within the Tiger·tec Silver technology, chosen to balance wear resistance and toughness for productive milling in steel and cast iron. How does the negative 0° rake affect machining? A negative 0° rake gives the insert a stronger cutting edge, reducing the risk of chipping under heavy or interrupted cuts and improving reliability in demanding operations. What benefits does the chipbreaker F57 provide? The chipbreaker F57 promotes consistent chip control and evacuation, which contributes to stable surface finishes and reduced risk of recutting chips in mixed-material production. Is the square 90° form suitable for heavy milling? The square 90° insert with a corner radius 2 provides a stable cutting geometry and good load distribution, making it suitable for robust milling tasks that require edge strength and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
SNMX120520-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and the WKP35G coated‑carbide grade for reliable, productive milling of steel and cast iron; the square 90° geometry with a 2 mm corner radius and F57 chipbreaker ensures consistent chip control and extended tool life. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. SNMX120520-F57 WKP35G – milling insert by Walter Tools, Tiger‑tec Gold coated, F57 chipbreaker The SNMX120520-F57 WKP35G is a square 90° milling insert designed for productive machining of steel and cast iron, combining a robust geometry with Tiger‑tec Gold coating for industrial applications Tiger‑tec Gold coating for reliable wear resistance Designed for steel and cast iron applications Square 90° geometry with 2 mm corner radius F57 chipbreaker for stable chip control Process reliability through advanced coating and grade The combination of Tiger‑tec Gold coating and the WKP35G grade delivers elevated wear resistance and a stable cutting edge, which directly supports longer tool life and fewer interruptions in production. As a coated carbide solution, this insert resists abrasive wear typical of cast materials and the thermal stresses of steel machining, enabling more consistent cycle times. In practice, optimised coating and substrate pairing reduce the need for frequent index‑changes and contribute to predictable maintenance intervals, which benefits throughput and cost efficiency. Geometry that secures part quality and edge strength A square 90° configuration with a 2 mm corner radius and 0° (negative) free angle provides a balance between edge strength and cutting performance. The negative rake increases robustness in heavy engagement cuts and supports stable chip formation at higher depths of cut, while the corner radius helps smooth transition zones to improve surface finish. The tolerance class M ensures repeatable seating and dimensional consistency across replacements, supporting tight process control on serial production. Efficient chip control for higher productivity The integrated F57 chipbreaker is engineered to manage both continuous and breaking chips common in steel and cast iron operations. By shaping chip flow and fragmenting long swarf into controllable segments, the breaker reduces vibration and minimises the risk of recutting. The result is improved tool stability and the potential for increased feed rates, raising productivity without sacrificing component quality. Clear chip evacuation also contributes to safer, cleaner machining cycles and more predictable tool performance. Compact design and application versatility With a designation that indicates size 12 and thickness code 05, the insert fits square‑geometry milling cutters designed for SNMX style pockets and clamping. The execution code X and the coated carbide construction make this insert suitable for a range of roughing and finishing tasks in industrial machining. Material compatibility covers ISO groups P (steel) and K (cast iron), offering versatility across typical workshop and production environments. The grade and series support stable performance where repeatability and process security are priorities. For productive, robust milling with Walter Tools' Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored application advice or to arrange supply of the SNMX120520-F57 WKP35G insert. Technical data Article number: SNMX120520-F57-WKP35G-WALTER Designation: SNMX120520-F57 WKP35G Product type: milling insert (indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Size: 12 Thickness code: 05 Corner radius: 2 mm Free angle: 0° (negative) Shape: square 90° Tolerance class: M Coating: Tiger‑tec Gold Grade description: WKP35G (coated carbide) Chipbreaker: F57 Material compatibility: Steel (P), Cast iron (K) Execution: X Plate form: square 90° FAQ What materials is this insert suitable for? The SNMX120520-F57 WKP35G insert (Walter Tools) is designed primarily for steel and cast iron applications, corresponding to ISO groups P and K. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, extending the effective cutting life of the insert in demanding milling operations. How does the F57 chipbreaker improve machining? The F57 chipbreaker shapes and breaks chips to reduce vibration and improve evacuation, supporting higher feed rates and more consistent surface quality during milling. What does the 0° (negative) free angle mean for cutting performance? A 0° (negative) free angle increases edge robustness and resistance to mechanical shock, making the insert better suited to heavier cuts and interrupted cuts where edge strength is required. How does the 2 mm corner radius affect the finished part? The 2 mm corner radius smooths transitions at the edge, contributing to improved surface finish and reduced risk of chipping in both roughing and finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMX120520-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of productive cutting performance and robust wear resistance for consistent steel milling results; order directly via Metav Werkzeuge or contact the consultants for application support. SNMX120520-F57 WPP35G milling insert, square 90°, 2 mm corner radius — Walter Tools The SNMX120520-F57 WPP35G is a square milling insert engineered for reliable steel machining, utilising the Tiger·tec Gold coated carbide for high process security in general steel applications. Tiger·tec Gold coated for high process security Designed for steel machining (ISO group P) Square 90° insert with 2 mm corner radius F57 chipbreaker for controlled chip formation Engineered for efficient steel milling The combination of a Tiger·tec Gold coating and a WPP35G coated carbide grade delivers a cost-effective balance between wear resistance and toughness for common steel applications (ISO group P). The insert’s square 90° geometry provides economic use of cutting edges and predictable engagement in shoulder and peripheral milling. The F57 chipbreaker shapes the chips for stable evacuation, reducing re-cutting and downtime, which supports higher material removal rates without compromising component quality. Durable coating and long tool life A modern multi-layer coating like Tiger·tec Gold increases thermal stability and protects the substrate against abrasive and adhesive wear. This results in extended edge life during continuous and interrupted cuts in steel. The substrate and coating pairing enable consistent surface finish and repeatable tool life, which translates into fewer tool changes and improved uptime across batch production. The result is measurable productivity gains and controlled tooling costs. Geometry tailored for chip control and robustness The insert’s negative rake of 0° (negative) combined with a 2 mm corner radius enhances edge strength for heavier cuts and interrupted machining, while the square 90° form supports multiple indexing positions. The F57 chipbreaker is engineered to generate short, manageable chips in typical steel alloys, simplifying chip handling and reducing the risk of chip-related damage to the workpiece or fixtures. These features together support secure, high-efficiency milling operations in industrial environments. Practical advantages for workshop and production use Specifically designed for general steel machining, the insert suits job shops and production lines seeking predictable performance and easy process implementation. The standardised designation and robust tolerance class provide clarity for tool management and reordering. Combined with Walter Tools’ engineering background and the Tiger·tec Gold series, the component is aimed at operators requiring a dependable, versatile insert for a wide range of turning and milling tasks. For reliable steel milling with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored application advice and availability of the SNMX120520-F57 WPP35G from Walter Tools. Technical data Article number: SNMX120520-F57-WPP35G-WALTER Label: Fräswendeschneidplatte SNMX120520-F57 WPP35G Walter Tools SKU: SNMX120520-F57-WPP35G-WALTER Brand: Walter Tools Key dimensions Corner radius: 2 Plate size: 12 Plate thickness: 05 Free angle: 0° (negativ) Plate form: Quadrat 90° Features and material compatibility Series: Tiger-tec Gold Grade / sort: WPP35G Chipbreaker: F57 Execution: X Tolerance class: M Material allocation: P (suitable for steel) Designation without sort: SNMX120520-F57 ISO designation: SNMX120520-F57 WPP35G FAQ What materials is this insert intended for? The SNMX120520-F57 WPP35G is designed for machining steel (ISO group P) and the Walter Tools Tiger·tec Gold grade is optimised for typical steel cutting conditions. How does the F57 chipbreaker affect machining? The F57 chipbreaker on the SNMX120520-F57 WPP35G promotes controlled chip formation in steel, improving evacuation and reducing the likelihood of chip entanglement during milling. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold coating increases thermal stability and wear resistance for the SNMX120520-F57 WPP35G, supporting longer edge life and consistent surface finish under industrial milling conditions. Is the insert suitable for interrupted cuts? Yes, the negative 0° rake and 2 mm corner radius provide enhanced edge strength, making the SNMX120520-F57 WPP35G appropriate for interrupted and heavier cutting operations. Can the square shape provide multiple usable edges? The square 90° form allows multiple indexing positions, which helps to extend tool life and improve cost efficiency in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new article of the manufacturer.
SNMX120520-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the high‑temperature resistance and edge stability of the Tiger·tec Gold grade together with the optimised F57 chipbreaker to secure consistent machining of stainless steel and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the technical team for application‑specific recommendations. SNMX120520-F57 WSM35G milling insert — Tiger·tec Gold, for stainless steel and superalloys (Walter Tools) SNMX120520-F57 WSM35G is a square, negative‑rake milling insert designed for demanding machining of stainless steel and heat‑resistant superalloys in industrial production. Tiger·tec Gold coated carbide grade WSM35G Square 90° geometry with 2 mm corner radius Negative 0° rake for stable cutting Optimised F57 chipbreaker for stainless steel Predictable cutting performance for tough materials The Tiger·tec Gold coating and the WSM35G grade combine to deliver a balance of heat resistance and edge stability that is advantageous when machining materials that generate high temperatures. The coated carbide substrate is engineered to reduce flank wear and to support a stable chip formation, which in turn lowers the frequency of tool changes and increases productive machine time. This paragraph focuses on measurable process improvements such as longer edge life and fewer interruptions, helping planners and production engineers to assess the economic impact of adopting this insert. Consistent surface quality and longer tool life A negative 0° rake, paired with the robust chip control of the F57 chipbreaker, reduces the tendency for built‑up edge and supports consistent surface finishes even under elevated cutting temperatures. Because the geometry directs chips reliably away from the cutting zone, the cutting edge is less exposed to sudden thermal shocks; the result is repeatable part quality and improved process security. The technical design therefore benefits series production where batch homogeneity and predictable maintenance cycles are essential. Robust geometry for secure clamping and multiple edges The square 90° form with a 2 mm corner radius offers a stable contact surface and four usable cutting edges per insert, which is advantageous for economical indexable‑insert management. The plate thickness and nominal dimensions (as listed below) are tailored for typical milling cutters that accept this ISO designation. The insert’s geometry, being intentionally negative and compact, supports heavy‑cut scenarios and reduces vibration in interrupted cuts, contributing to both tool and spindle protection. Where this insert makes a measurable difference This grade is especially suited to machining stainless steel (ISO group M) and to difficult‑to‑cut materials categorised in group S, such as heat‑resistant superalloys and titanium, where thermal loads and edge stress are high. In these contexts, the combination of coating, substrate and chipbreaker technology offers improved process stability and surface integrity. For production planners, that translates into fewer rejects, predictable cycle times and a clear cost‑of‑ownership advantage over less specialised grades. For application support or to specify this insert for a particular machine and workpiece, contact Metav Werkzeuge—technical consultation is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data SKU: SNMX120520-F57-WSM35G-WALTER Product: Fräswendeschneidplatte (milling insert) Designation: SNMX120520-F57 WSM35G Manufacturer: Walter Tools Core specifications Plate form: Quadrat 90° Corner radius: 2 Plate size: 12 Relief/rake angle: 0° (negativ) Tolerance class: M Plate thickness: 05 Special features Series: Tiger·tec Gold Grade/sorte: WSM35G Chipbreaker: F57 Material groups: S / M Suitable for: stainless steel (ISO group M); heat‑resistant superalloys and titanium (ISO group S) FAQ What materials is this insert optimised for? The SNMX120520-F57 WSM35G from Walter Tools is optimised for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), where its coating and grade support thermal stability and edge life. How does the F57 chipbreaker affect machining? The F57 chipbreaker on this insert improves chip control during cutting of tough materials, promoting secure evacuation of chips and helping to maintain a stable cutting edge for consistent part quality. Why choose a negative 0° rake geometry? A negative 0° rake provides a robust cutting edge that resists chipping under heavy loads and interrupted cuts; this geometry supports process reliability in demanding milling operations. How many cutting edges are available per insert and what is the benefit? The square 90° geometry offers four indexable cutting edges, enabling economical rotation of edges and reducing tooling costs over a production run when compared with single‑edge components. Which series and coating technology does the insert use? The insert belongs to the Tiger·tec Gold series and uses the WSM35G coated carbide grade, a combination targeted at high process security and extended tool life when machining challenging alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and Walter Tools. The item offered is original, factory‑new goods of the manufacturer.
SNMX120520-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, a robust square 90° geometry and broad material compatibility for reliable milling performance and extended tool life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMX120520-F57 WSP45G milling indexable insert — Square 90°, 2 mm corner radius (Walter Tools) SNMX120520-F57 WSP45G is a precision milling insert designed for high-demand milling applications in steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Square 90° form for shoulder milling 2 mm corner radius for robust cutting edge Proven coating and wide material range for longer tool life The WSP45G grade from the Tiger·tec Gold series combines a wear-resistant PVD-coated layer with a tough substrate, optimised for intermittent and continuous milling. The coating reduces flank and crater wear while the substrate maintains edge stability under thermal load. As a result, the insert supports consistent chip control and extended service intervals when machining steel, stainless steel and superalloys (P / M / S), reducing unplanned tool changes and raising process efficiency. In practice this means fewer interruptions on the shop floor and more predictable cycle times. Geometry engineered for stability and process reliability The insert’s square 90° configuration with a 2 mm corner radius delivers a strong cutting edge suited to shoulder and face milling where rigidity and resistance to mechanical shock are essential. The chipbreaker F57 is tuned to promote stable chip formation across a range of depths of cut; the 0° negative relief angle increases edge strength for heavy engagement. These geometric choices lower the risk of built-up edge and vibration, supporting improved surface finish and dimensional consistency. The tolerance class M further ensures repeatable fit and positioning in standard toolholders. Operational advantages and clear application guidance Using this insert reduces tool inventory complexity thanks to its multi-material capability and proven grade behaviour. The PVD technology and robust geometry offer a balance between wear resistance and toughness, delivering cost efficiency through longer life and fewer regrinds. For users with mixed-production environments, the insert enables rapid changeover between components made of different alloys while maintaining process stability. Indexable tooling benefits—such as quick insert replacement and reliable seating—translate technical performance into measurable shop-floor gains: higher uptime and steadier part quality. For tailored application advice and procurement of the Tiger·tec Gold SNMX120520-F57 WSP45G insert contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and ordering support Technical Data SKU: SNMX120520-F57-WSP45G-WALTER Product name: SNMX120520-F57 WSP45G Manufacturer: Walter Tools Product type: Milling indexable insert Core dimensions Inscribed size: 12 Thickness: 05 Corner radius: 2 Relief angle: 0° (negative) Tolerance class: M Design & features Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: F57 Applicable materials: P / M / S (steel, stainless steel, superalloys) Form: Square 90° Execution: X Base designation: SNMX120520-F57 FAQ What materials is this insert best suited for? The SNMX120520-F57 WSP45G insert is formulated for machining steel, stainless steel and heat-resistant superalloys, reflecting the P / M / S material groups. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and thermal stability, which extends tool life and improves reproducibility in demanding milling operations. Is the insert suitable for shoulder milling? Yes. The square 90° form and the 2 mm corner radius make this insert particularly suitable for shoulder and face milling where a stable cutting edge and rigidity are required. What benefits does the F57 chipbreaker provide? The chipbreaker F57 promotes controlled chip formation across a range of cutting conditions, supporting consistent surface finish and reduced risk of built-up edge during operation. Can the insert be used in heavy engagement cuts? With its negative relief angle and robust grade, the insert is designed to withstand intermittent heavy engagement; appropriate cutting data and holder rigidity should be observed for best results. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer.
SNMX1205ANN-F27 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WKP25S grade for consistent tool life and stable chip control; the result is more productive milling in steel and cast iron and fewer unplanned tool changes. Order the SNMX1205ANN-F27 WKP25S milling insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMX1205ANN-F27 WKP25S — Milling indexable insert, square 90°, Tiger‑tec Silver by Walter Tools The SNMX1205ANN-F27 WKP25S is a square 90° milling insert developed for productive roughing and semi-finishing in steel and cast iron applications Tiger‑tec Silver coating for long tool life Optimised F27 chip control Square 90° geometry for robust milling Suited for steel and cast iron machining Higher throughput through coated-carbide performance The combination of the Tiger‑tec Silver series and the WKP25S grade provides a balance of wear resistance and fracture toughness that raises machining consistency. Because the insert is a coated carbide grade optimised for groups P and K, heat and abrasive wear are managed more effectively during interrupted or continuous cuts, which leads to more stable process windows and fewer tool interventions. The practical benefit is a reduction in unplanned downtime and a more predictable production rhythm. Predictable chips and safer machining with F27 geometry The patented F27 chipbreaker is designed to generate short, controllable chips when cutting both steel and cast iron, improving evacuation and reducing re-cutting. Better chip control decreases the likelihood of tool damage and improves surface integrity of the workpiece, which is particularly valuable when machining complex contours or deep pockets. As a result, cycle times can be optimised while maintaining workpiece quality. Robust edge and dimensional stability for reliable results The square 90° form and negative 0° relief provide a secure cutting position and high mechanical strength at the insert edge. Combined with tolerance class M, users benefit from reproducible seat location and repeatable tool offsets, which simplifies tool set-up and reduces fixture trial time. This structural stability supports higher feed rates and conservative process planning for repeated production runs. Practical integration into workshop workflows The insert’s compatibility with standard milling cutters and its application focus on steel and cast iron make it straightforward to introduce into existing machining strategies. Metrology-friendly tolerances and consistent chip behaviour reduce inspection frequency and downstream rework. For application support or to discuss recommended cutting data, Metav Werkzeuge provides technical consultation tailored to specific materials and machine tool conditions. For machining operations that demand consistency from Walter Tools’ Tiger‑tec Silver products, contact Metav Werkzeuge for individual application recommendations and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: SNMX1205ANN-F27-WKP25S-WALTER Name: SNMX1205ANN-F27 WKP25S Type: Milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 12 Plate thickness: 05 Plate form: Quadrat 90° Relief angle: 0° (negativ) Tolerance class: M Special features Grade: WKP25S Chipbreaker: F27 Suitable for: Steel (P) and cast iron (K) Coated carbide technology Designation: SNMX1205ANN-F27 FAQ What materials is this insert intended for? The SNMX1205ANN-F27 WKP25S from Walter Tools is formulated for machining steel and cast iron, corresponding to ISO material groups P and K. How does the F27 chipbreaker affect performance? The F27 chip control geometry produces short, consistent chips, improving evacuation and reducing re-cutting risks when milling with the SNMX1205ANN-F27 WKP25S insert. Is the insert suitable for interrupted cuts? Yes; the combination of the WKP25S grade and the square 90° geometry provides mechanical robustness that supports interrupted and heavy milling operations. What tolerance and seating characteristics can be expected? Tolerance class M ensures reproducible seating and repeatable tool offsets, aiding quick tool changes and stable toolpaths when using the SNMX1205ANN-F27 WKP25S insert. Can this insert be used in existing cutter bodies? The design follows standard indexable insert dimensions and can be integrated into compatible cutter bodies that accept SNMX-style square inserts; consult Metav Werkzeuge for confirmation of seat compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
SNMX1205ANN-F27 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WKP35G grade and robust 90° square geometry for high process reliability and extended tool life. This milling indexable insert delivers consistent chip control in steel and cast iron, enabling productive machining cycles. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. SNMX1205ANN-F27 SNMX1205ANN-F27 WKP35G milling indexable insert — Tiger‑tec Gold by Walter Tools A SNMX1205ANN-F27 WKP35G milling insert engineered for productive machining of steel and cast iron, featuring a square 90° geometry and a 0° negative rake for robust cutting performance Tiger‑tec Gold coated for high wear resistance WKP35G grade for steel and cast iron machining Square 90° geometry with 0° negative rake F27 chipbreaker for stable chip control Boosted productivity thanks to advanced coating and grade The combination of the Tiger‑tec Gold series and the WKP35G grade provides a coated carbide solution optimised for demanding chip and heat conditions encountered when machining steel and cast iron. The coating increases abrasion resistance and maintains a sharp cutting edge for longer, which translates into fewer indexings and steadier cycle times. The insert is designed to meet the ISO material groups P and K, so the machining behaviour expected from these groups—such as the thermal load in steel and the abrasive nature of cast iron—is accounted for in the grade selection, supporting predictable tool life and consistent component output. Consistent accuracy from proven geometry and tolerance A square 90° geometry combined with a 0° negative rake yields a sturdy cutting edge that resists chipping in interrupted cuts and heavy engagement. The insert’s tolerance class M ensures repeatable seating and dimensional stability in the toolholder, which reduces the need for frequent rework. For production environments where component tolerances and surface integrity matter, the robust geometry reduces vibration and supports steady cutting forces, helping to maintain finished-part quality while keeping machining windows reliable. Safer, cleaner machining with dedicated chip control Equipped with the F27 chipbreaker, the insert promotes short, controllable chips when turning energy into chip formation rather than excessive heat or built-up edge. Improved chip control lowers the risk of chip entanglement and supports uninterrupted automatic feeding, which is particularly beneficial in serial production. The result is a better surface finish and reduced downtime related to manual chip clearing—practical advantages for workshops seeking both efficiency and repeatability. Practical integration for workshop and production use The insert is supplied in the SNMX1205 geometry common to many milling systems and is compatible with holders designed for square 90° inserts; this facilitates quick integration into existing tooling setups. The negative rake and the coated grade make the component suitable for a range of roughing and semi-finishing operations in mixed-shop environments. For basic selection and cutting-parameter planning, reference the grade and chipbreaker combination when choosing feed and speed to balance material removal rate with tool life. Additional technical data and application recommendations are available upon request to support seamless process implementation. Contact Metav Werkzeuge for tailored application advice and to arrange supply of Walter Tools SNMX1205ANN-F27 WKP35G milling indexable inserts, ensuring the right grade and chipbreaker for the machining task. Technical Data Article number: SNMX1205ANN-F27-WKP35G-WALTER Description: Fräswendeschneidplatte / milling indexable insert SNMX1205ANN-F27 WKP35G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Facts Geometry: Square 90° Rake angle: 0° (negative) Chipbreaker: F27 Size: 12 Thickness: 05 Tolerance class: M Special features Material groups: P / K (steel and cast iron) Coating / technology: Tiger‑tec Gold Execution: X Designation: SNMX1205ANN-F27 ISO designation: SNMX1205ANN-F27 WKP35G FAQ Which materials is this insert suitable for? The SNMX1205ANN-F27 WKP35G insert is designed for steel and cast iron, corresponding to ISO groups P and K, making it suitable for typical applications in these material classes. Is the insert coated and how does that help? Yes—the insert uses the Tiger‑tec Gold coating technology; the coating improves abrasion resistance and cutting-edge stability, which helps to extend tool life in abrasive and heat‑generating operations. What are the key geometry features to consider? The insert has a square 90° geometry with a 0° negative rake and an F27 chipbreaker, which together offer a robust edge for interrupted cuts and controlled chip formation. How does the tolerance class affect machining? Tolerance class M provides reliable seating in the toolholder and contributes to dimensional stability during serial production, reducing the need for repeat adjustments. Can this insert be used for roughing and semi‑finishing? Yes—due to its coated grade and sturdy geometry, the insert suits both roughing and semi‑finishing tasks in steel and cast iron, with final parameter selection dependent on the specific holder and machine setup. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
SNMX1205ANN-F27 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of a Tiger·tec Silver coating, a balanced WKP35S grade and precise square geometry for reliable, high‑productivity milling of steel and cast iron; order the SNMX1205ANN‑F27 WKP35S directly via Metav Werkzeuge or consult the technical team for application support. SNMX1205ANN-F27 WKP35S — Milling indexable insert (square 90°, Tiger·tec Silver) by Walter Tools The SNMX1205ANN-F27 WKP35S is a square 90° milling insert with a Tiger·tec Silver coated carbide grade, engineered for robust machining of steel and cast iron in demanding industrial milling operations. Tiger·tec Silver coating for extended life Optimised WKP35S grade for steel and cast iron Square 90° geometry for stable milling F27 chipbreaker for reliable chip control Durable coating and balanced grade increase uptime The combination of the Tiger·tec Silver coating with the WKP35S carbide grade gives a measurable advantage in abrasive and thermal wear resistance. The coated carbide substrate provides a thermal barrier and improved hardness at cutting edge temperatures, which leads to longer tool life and fewer tool changes. This balance of properties is particularly relevant when machining unalloyed and alloyed steel and abrasive cast materials classified under ISO group K, where both heat resistance and controlled flank wear are decisive for consistent component quality. Geometry that ensures stable, predictable machining The square 90° configuration and 0° negative rake create a stable cutting edge that resists chipping under interrupted cuts and heavy engagement angles. The insert’s dimensional code and tolerance class M support reproducible seating in pockets, reducing vibration and improving surface finish repeatability. These geometric features make the insert suitable for applications that prioritise robustness and process security, such as shoulder milling and roughing operations where edge stability directly affects cycle times and scrap rates. Chip control and process efficiency for smoother production Equipped with the F27 chipbreaker, the insert promotes short, manageable chips and reliable evacuation across a range of chip loads. Efficient chip formation reduces rework and tool interference, helping to maintain cutting parameters for longer periods and improving overall machine utilisation. The coordinated interaction of the chipbreaker and coating supports a productive milling rhythm, which translates into a tangible increase in throughput for batch or continuous production environments. Practical application scope and handling considerations Designed for the machining of steel (ISO P) and cast iron (ISO K), the insert is a versatile choice where mixed multi‑material production demands consistency. The square form factor offers four usable cutting edges per indexable plate, contributing to economical tool cost per edge and straightforward indexing. For best results, select compatible tool holders that match the SNMX geometry and follow manufacturer recommendations for speeds and feeds; the insert is optimised to deliver repeatable results in industrial milling setups where stable chip control and tool life are priorities. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools SNMX1205ANN‑F27 WKP35S into specific machining processes or to check current stock and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMX1205ANN-F27-WKP35S-WALTER Name: SNMX1205ANN-F27 WKP35S Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness code: 05 Free angle: 0° Plate form: Quadrat 90° Tolerance class: M Special features Series: Tiger-tec Silver Grade: WKP35S Chipbreaker: F27 Material compatibility: P (steel) Material compatibility: K (cast iron) Execution: X Material code: P / K FAQ What materials is this insert suitable for? The SNMX1205ANN‑F27 WKP35S is designed for machining steel (ISO group P) and cast iron (ISO group K), with the WKP35S grade optimised for these workpiece groups. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the SNMX insert reduces thermal wear and extends cutting edge life, improving process stability and reducing the frequency of tool changes. How does the F27 chipbreaker affect machining? The F27 chipbreaker promotes short, controllable chips and consistent evacuation, which supports uninterrupted cutting and improves overall process efficiency with the SNMX geometry. Is the square 90° form suitable for finishing work? The square 90° geometry offers stability and multiple indexable edges; while primarily robust for roughing and shoulder milling, it can be used in semi‑finishing where edge stability and repeatability are required. How many cutting edges are available per insert? A square 90° indexable plate such as this typically provides four usable cutting edges per insert, enabling economical indexing and extended service life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The article offered is original, factory‑new goods from the manufacturer (Walter Tools).
SNMX1205ANN-F27 WPP35G WPP35G Wendeplatten - Walter Tools
The combination of the Tiger·tec Gold coating and the WPP35G grade delivers extended tool life and dependable chip control when machining steel; the square 90° form with chipbreaker F27 provides robust edge stability for demanding milling tasks. Order the SNMX1205ANN-F27 WPP35G insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. SNMX1205ANN-F27 WPP35G — Square 90° indexable milling insert for steel by Walter Tools SNMX1205ANN-F27 WPP35G is a square 90° indexable milling insert designed for productive steel machining, featuring Tiger·tec Gold coated carbide and a controlled chipbreaker for consistent performance Tiger·tec Gold coating for stable cutting edge Coated carbide grade WPP35G Square 90° insert for robust milling Chipbreaker F27 for controlled chip formation Improved efficiency and extended tool life in steel machining The combination of the Tiger·tec Gold coating with the WPP35G coated carbide grade is engineered specifically for steel applications (material group P). This pairing reduces flank wear and improves resistance to the thermal loads that develop during cutting, resulting in longer tool life and fewer insert changes. In practical terms, the coated technology supports higher cutting speeds and more consistent process windows, which translates into measurable production gains and reduced downtime for series machining operations. Predictable surface quality and secure cutting behaviour The chipbreaker F27 and the Square 90° geometry ensure reliable chip formation and evacuation under typical milling conditions for steel. The insert’s 0° (negative) rake angle provides a robust cutting edge and reduces the tendency for chipping when engaged in interrupted or heavy cuts. Together with the tolerance M specification, this geometry offers predictable surface finish and repeatable results across batches, making it suitable for both roughing and semi-finishing tasks where stability is a priority. Practical compatibility and straightforward handling in the workshop Designed as an indexable insert, this plate fits common square toolholders and is coded for straightforward replacement. The nominal dimension (size 12) and the standardised designation simplify inventory management and tool selection. For less experienced users: a chipbreaker shapes the way the material breaks away from the workpiece, improving swarf control; a negative rake angle strengthens the cutting edge at the expense of slightly higher cutting forces — a trade-off that benefits heavy-duty milling. These built-in properties reduce the need for trial-and-error set-ups and help maintain consistent cycle times. Cost-efficiency through stable performance and predictable maintenance Using a coated grade that is tuned for steel machining reduces scrap risk and the frequency of rework by delivering consistent cutting behaviour and edge stability. The result is a more economical machining process: fewer unplanned stoppages, longer intervals between insert changes and more predictable tool consumption. Backed by the reputation of Walter Tools, this solution supports reliable production planning and helps secure throughput even under demanding conditions. Contact Metav Werkzeuge for application-specific recommendations and availability of Walter Tools Tiger·tec Gold inserts Technical Data Article number: SNMX1205ANN-F27-WPP35G-WALTER Name: SNMX1205ANN-F27 WPP35G Manufacturer: Walter Tools Facts Size: 12 mm Rake angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features Grade: WPP35G (coated carbide, Tiger·tec Gold) Chipbreaker: F27 Application: Steel (P) Series: Tiger·tec Gold FAQ What materials is this insert suited for? The SNMX1205ANN-F27 WPP35G insert is engineered for steel (material group P) and is optimised for the heat and chip characteristics typical of steel machining. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, extending tool life and enabling more consistent cutting conditions with fewer tool changes. What does the chipbreaker F27 do? The chipbreaker F27 promotes controlled chip formation and evacuation, which reduces swarf-related issues and contributes to a stable surface finish when milling steel. Is the geometry suitable for heavy-duty milling? Yes; the Square 90° geometry combined with a 0° (negative) rake angle provides a robust cutting edge that is well suited to interrupted cuts and heavier milling operations. Which series and grade does the insert belong to? This insert is part of the Tiger·tec Gold series and uses the WPP35G coated carbide grade, selected for productive and reliable steel machining. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands; the offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com