TCGT110201-MN2 WNN10 T Wendeplatten - Walter Tools
Benefit from the combination of a coated carbide grade (WNN10), a precise MN2 chipbreaker and a compact triangle 60° geometry to ensure reliable chip control and predictable tool life in serial turning and boring operations. Order directly via Metav Werkzeuge or consult the Metav specialists for application-specific recommendations. TCGT110201-MN2 WNN10 – Triangle 60° turning/boring insert, MN2 chipbreaker | Walter Tools The TCGT110201-MN2 WNN10 is a triangle 60° indexable insert for turning and boring applications, designed to provide stable chip formation and adaptable performance across a broad range of workpiece materials. Triangle 60° insert geometry 7° clearance angle for free cutting 0.1 mm corner radius for precise finishes Coated carbide grade WNN10 for wide material coverage Geometry that delivers consistent component quality The compact triangle 60° geometry and the 0.1 mm corner radius combine to deliver repeatable dimensional control and consistent surface finish during finishing and light roughing passes. The insert shape enables three indexing positions, which improves economy and reduces tool change frequency. The modest clearance of 7° minimises rubbing while maintaining stable contact conditions, making the geometry particularly suitable for batch production where repeatability and low variation are essential. These features support shorter cycle times and reduce the need for secondary finishing. Coating and substrate engineered for productivity The cutting grade WNN10 is a coated carbide formulation tailored for general turning duties; it provides balanced wear resistance and toughness for mixed-material production. Combined with the MN2 chipbreaker, the insert promotes stable chip fragmentation and evacuation, which lowers the risk of edge damage and chatter. The design focus is on improving process reliability: fewer unexpected interruptions and more consistent tool life translate into higher overall productivity in both small and large series machining. Practical versatility across turning and boring tasks With an insert size designation of 11 and thickness designation 02, this indexable insert is compact yet robust for a wide range of turning and light boring tasks. The MN2 chipbreaker is optimised for controlled chip flow at moderate feeds and speeds, so the insert is well suited to finishing and semi-finishing steps where surface quality is important. The coated grade broadens applicability across common materials; however, specific workpiece suitability should be checked against the product matrix for best results. Stable handling and economical indexing The triangular form provides three usable cutting edges per index, which improves economy and reduces tooling consumption per part. The combination of the MN2 chipbreaker and the WNN10 coating assists in stable edge behaviour under variable cutting conditions, supporting predictable regrinding intervals and turnover planning. For manufacturing environments that value uptime and reproducible outcomes, the insert’s straightforward indexing logic and proven substrate coating contribute directly to process efficiency and lower total cost of ownership. Contact Metav Werkzeuge today for tailored tooling advice and application guidance based on the Walter Tools range — Metav Werkzeuge is available for specification support and can analyse suitability for specific materials and cutting conditions (eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930) Technical Data Article number: TCGT110201-MN2-WNN10-WALTER Product type: Turning/boring indexable insert Designation: TCGT110201-MN2 WNN10 Manufacturer: Walter Tools Facts Insert size: 11 Clearance angle: 7° Corner radius: 0.1 mm Thickness designation: 02 Tolerance class: G Special features Chipbreaker: MN2 Coating/substrate: Coated carbide, grade WNN10 Insert form: Triangle 60° Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Catalogue-dependent FAQ What applications is this insert best suited for? The TCGT110201-MN2 WNN10 insert is intended for turning and light boring operations where controlled chip formation and a fine surface finish are required; the MN2 chipbreaker supports finishing and semi-finishing passes. Which materials can be machined with this grade? The WNN10 coated carbide offers balanced wear resistance and toughness for a broad material range; specific workpiece suitability should be verified against the product matrix for the TCGT110201-MN2 WNN10. How many cutting edges are available per insert index? The triangular 60° shape provides three indexable cutting edges, improving economy and reducing the frequency of insert replacements during production. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius helps to achieve a fine surface finish while maintaining adequate edge strength for light finishing passes with stable cutting conditions. Is the insert compatible with standard clamping systems? The TCGT110201-MN2 WNN10 follows common indexable insert geometries and is compatible with toolholders designed for TCGT-style triangle inserts; confirm holder compatibility with the toolholder specification. Walter Tools (Walter AG) is part of the Walter Group. Protected trademarks and product names belong to their respective owners. Mark names and trademarks are used for explanation only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TCGT110202-FM2 WSM01 FM2 Wendeplatten - Walter Tools
Take advantage of a high‑performance, coated grade combined with a compact triangle geometry for reliable chip control and consistent surface quality in demanding materials; order directly via Metav Werkzeuge or consult our specialists for application advice. TCGT110202-FM2 WSM01 – Drilling and turning indexable insert, Tiger‑tec Silver (Triangle 60°, 0.2 mm) The TCGT110202-FM2 WSM01 is an indexable insert engineered for turning and reboring tasks where heat and toughness place heavy demands on the cutting edge; suitable particularly for machining rostfreier Stahl and heat‑resistant superalloys. Tiger‑tec Silver coating for superior wear resistance WSM01 grade for rostfreier Stahl and superalloys Triangle 60° form with 0.2 mm nose radius FM2 chipbreaker and 7° clearance for stable chips Durable coated grade for demanding materials The WSM01 grade, part of the Tiger‑tec Silver series, is a coated carbide developed for applications in rostfreier Stahl and heat‑resistant alloys. The composition and coating promote stable chip formation and enhanced wear resistance under conditions of elevated temperature and adhesion tendency. For shops processing tough batches of rostfreier Stahl or titanium‑based and nickel‑base alloys, this insert offers predictable tool life and reduced risk of built‑up edge, which supports consistent component tolerances and fewer unplanned tool changes. Geometry and chip control for reproducible surface quality A Triangle 60° configuration with a 0.2 mm nose radius provides a compact cutting profile that balances strength and finish. Combined with the FM2 chipbreaker and a 7° clearance, the geometry facilitates controlled chip evacuation and helps maintain a stable cutting edge during interrupted cuts or when feeding across variable section depths. The compact corner reduces cutting force peaks, aiding dimensional repeatability while supporting acceptable surface finishes in indexable turning and reboring operations. Practical benefits for productivity and process security The insert’s tolerance class G and the series’ material focus make it straightforward to specify for production runs where reproducibility is essential. Using a dedicated grade like WSM01 reduces trial-and-error at process start‑up, shortens setup time and contributes to a lower overall cost per part through longer effective tool life. Where toolroom reliability and fewer tool changes matter, the combination of coated carbide and targeted chip control delivers measurable gains in throughput and machine availability. Selection and handling guidance Choose the insert geometry and seat it in compatible holders specified for triangular indexable inserts; the FM2 chipbreaker is tuned for medium to heavy engagement in tough materials. Small corner radii such as 0.2 mm suit finishing passes or when tight profile accuracy is required, while the robust grade supports heavier roughing when toolpaths permit. For mixed production of rostfreier Stahl and superalloys, standardise on cutters that accept the TCGT110202 family to simplify inventory and ensure consistent clamping and orientation. For tailored machining recommendations for Walter Tools' TCGT110202-FM2 WSM01 and to discuss suitable cutting data or holder options, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: TCGT110202-FM2-WSM01-WALTER Designation: TCGT110202-FM2 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Form: Triangle 60° Chipbreaker: FM2 Manufacturer: Walter Tools Core specifications Corner radius: 0.2 mm Clearance / free angle: 7° Size: 11 Thickness code: 02 Tolerance class: G Features & material suitability Coated carbide insert Optimised for rostfreier Stahl (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Stable chip control via FM2 chipbreaker Compact triangle geometry for versatile turning and reboring FAQ What materials is this insert best suited for? The TCGT110202-FM2 WSM01 is optimised for rostfreier Stahl and also suitable for heat‑resistant superalloys and titanium, following the ISO group allocations for M and S materials. Can this insert be used for both roughing and finishing? Yes. The combination of a robust WSM01 grade and a 0.2 mm nose radius allows the insert to perform in heavier engagement roughing as well as precise finishing passes when the toolpath and holder setup are appropriate. How does the Tiger‑tec Silver series help in production? The Tiger‑tec Silver coating improves wear resistance and thermal stability, which contributes to longer tool life and more consistent part quality across extended runs. What does the FM2 chipbreaker deliver in practice? The FM2 chipbreaker assists in producing short, controlled chips and supports stable cutting conditions, reducing the likelihood of chip entanglement and improving surface consistency during turning or reboring operations. Is the triangle 60° form suitable for reboring operations? The triangle 60° form offers a compact, strong edge geometry that is commonly used for a range of turning and reboring tasks; compatibility with specific holders should be checked to ensure correct seating and orientation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered marks are used for clarification only; there is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
TCGT110202-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for consistently stable chip control and extended tool life in demanding stainless steel and superalloy turning operations; order through Metav Werkzeuge or contact the sales team for tailored advice. TCGT110202-FM2 WSM20S indexable turning insert (triangle 60°) by Walter Tools — coated carbide for stainless steels and superalloys The TCGT110202-FM2 WSM20S is a triangle 60° indexable insert designed for heavy-duty finishing and medium-turning of rostfreie Stähle and heat-resistant superalloys, delivering stable cutting performance where thermal and mechanical loads are high Tiger·tec Silver coated carbide grade WSM20S Triangle 60° insert geometry for versatile turning 7° clearance angle for reliable edge engagement 0.2 mm corner radius for controlled edge strength Consistent performance when machining demanding materials The combination of a coated carbide substrate and the Tiger·tec Silver family provides a balance of hardness and thermal resistance that supports predictable cutting in tough applications. The graded WSM20S composition is optimised for materials that generate heat and tend to work-harden, such as rostfreie Stähle and nickel‑based superalloys. This results in stable chip formation and reduced risk of built-up edge, which directly translates into longer effective tool life and fewer process interruptions. For production environments where reproducibility is vital, the insert’s geometry contributes to consistent cutting forces and surface finishes. Geometry engineered for precision and process security A triangle 60° shape offers three usable cutting corners, making it economical for batch production while maintaining repeatable results. The 0.2 mm corner radius enhances edge strength without compromising the ability to achieve fine surface quality in finishing passes. A 7° clearance angle reduces rubbing and heat generation at the flank, supporting dimensional stability over longer cycles. These geometric choices help safeguard the integrity of the workpiece and minimise rework, supporting efficient workflow in industrial turning operations. Practical benefits for workshop productivity The FM2 chipbreaker geometry is tailored to promote short, consistent chips under the thermal conditions typical of stainless steels and superalloys. Short chips improve machine uptime and reduce the likelihood of entanglement, which in turn lowers manual intervention and increases throughput. The insert’s format and indexable design simplify inventory management: multiple cutting edges per insert reduce tooling change frequency, and the clearly defined tolerance class supports predictable tool setup and interchangeability in established machining cycles. Application guidance and process optimisation Select cutting parameters that reflect the material group and the intended operation: conservative cutting depths and optimised feed rates for finishing will exploit the insert’s edge stability and coating performance. The WSM20S grade is particularly suitable where heat resistance and edge integrity matter; when machining rostfreie Stähle or heat‑resistant alloys, prioritise coolant strategies and appropriate speed/feed pairing to avoid premature wear. For shops seeking to improve first‑pass yields, pairing this insert with compatible toolholders and a stable clamping setup will provide the best results. Contact Metav Werkzeuge to discuss Walter Tools’ Tiger·tec Silver WSM20S inserts and to arrange a suitable supply plan for your turning operations Technical Data SKU: TCGT110202-FM2-WSM20S-WALTER Designation: TCGT110202-FM2 ISO designation: TCGT110202-FM2 WSM20S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Key measurements Clearance angle: 7° Corner radius: 0.2 mm Inscribed circle / size: 11 mm Thickness code: 02 Tolerance class: G Materials and special features Grade / series: WSM20S, Tiger·tec Silver Substrate: coated carbide Chipbreaker: FM2 Insert form: triangle 60° Execution: T Applicable: rostfreie Stähle (stainless steels) FAQ What materials is this insert best suited for? The TCGT110202-FM2 WSM20S insert is designed primarily for rostfreie Stähle and heat‑resistant superalloys; the WSM20S grade and Tiger·tec Silver coating improve performance in these groups. How does the FM2 chipbreaker affect chip control? The FM2 chipbreaker promotes short, manageable chips under the thermal conditions typical of stainless steels and superalloys, which improves machine uptime and reduces chip handling issues when using the insert. Can the insert be indexed to use multiple cutting edges? Yes, the triangular 60° geometry provides three usable corners per insert, enabling economical edge replacement and predictable repeatability during tool changes. What surface finish can be expected with this geometry and radius? With a 0.2 mm corner radius and the coated grade, the insert supports fine finishing passes that produce reliable surface quality on demanding materials, provided cutting parameters are correctly selected. Is the WSM20S grade suitable for high‑speed machining? WSM20S is engineered for thermal stability and edge integrity; while it is optimised for challenging materials, achievable cutting speeds depend on machine capability and the specific workpiece alloy rather than the grade alone. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCGT110202-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide performance and a FN2 chipbreaker for controlled chip formation and consistent surface quality; order the TCGT110202-FN2 WNN10 insert through Metav Werkzeuge or consult the technical team for application support. TCGT110202-FN2 WNN10 – Turning/boring indexable insert, FN2 chipbreaker, Walter Tools The TCGT110202-FN2 WNN10 is a triangular 60° insert intended for general turning and fine finishing, offering a coated carbide grade tuned for stable chip formation and repeatable performance Coated carbide grade WNN10 for durability FN2 chipbreaker for controlled chip formation 7° relief angle for precise cutting action Triangular 60° insert with 0.2 mm corner radius Improved productivity through controlled chip flow The combination of a coated carbide substrate and the FN2 chipbreaker provides reliable chip control that translates into fewer interruptions in production. The chip geometry reduces the risk of entanglement and tool interference, which in turn supports higher effective machining time and more predictable cycle times. For batch runs and mixed production, this insert helps to maintain consistent surface quality while reducing manual chip management, delivering a clear efficiency advantage on the shop floor. Accurate form and finishing on critical components A 7° relief angle together with the 0.2 mm corner radius supports accurate profile generation and fine finishing passes. The triangular 60° geometry gives three utilizable cutting edges per index, improving cost-per-edge efficiency and enabling better access in typical turning set-ups. These geometric choices favour stable cutting conditions and help to achieve the dimensional tolerance and surface requirements common in serial turning applications. Simple integration and repeatable results across jobs The insert is manufactured to a defined tolerance class (G) and a standard size code, which supports straightforward toolholder compatibility and predictable indexing. The Walter cutting grade series information indicates a coated carbide grade; users should verify the material matrix for final machining parameters. Because the insert is produced to standard indexable insert conventions, it is well suited to automatic tool change systems and repeatable set-ups where minimising variation between cycles is essential for process security. Practical support and application advice available When material choice or cutting data are uncertain, Metav Werkzeuge provides application guidance and can assist with recommendations for turning parameters and toolholder pairing. Contact options are available for technical clarification and to discuss specific component materials or machining strategies. Effective consultation reduces trial-and-error time and helps to select the correct feed and speed to fully exploit the FN2 chipbreaker and the grade properties for longer tool life. For machining tasks where stable chip control and repeatable edge life are required, contact Metav Werkzeuge for a tailored supply or application consultation on the Walter Tools TCGT110202-FN2 WNN10 insert — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: TCGT110202-FN2-WNN10-WALTER Designation: TCGT110202-FN2 WNN10 Type: Turning/boring indexable insert Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Triangular 60° Size code: 11 Thickness code: 02 Tolerance class: G Special features Grade series: Walter cutting grade series — open series Cutting material class: coated carbide Chipbreaker type: FN2 Series description: coated carbide grade WNN10 Application note: verify material matrix for selection FAQ What materials is this insert suited for? The TCGT110202-FN2 WNN10 insert from Walter Tools is a coated carbide grade intended for general turning applications; verify the grade matrix for specific material suitability before selecting cutting data. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation and easier chip evacuation, which helps to maintain uninterrupted machining and consistent surface finish when the insert is used with appropriate parameters. How many cutting edges are available per insert? The triangular 60° geometry provides three indexing positions, allowing up to three usable cutting edges per insert when rotated and re-indexed. Is the insert compatible with automatic tool change systems? Yes, the insert follows standard indexable insert conventions and the specified tolerance class supports repeatable seating and compatibility with common toolholder systems. Can Metav Werkzeuge provide cutting data for specific jobs? Metav Werkzeuge can advise on cutting speeds and feeds for typical materials and applications to make the most of the WNN10 grade and FN2 chipbreaker performance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
TCGT110202-MN2 WN10 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, a robust WN10 carbide grade and consistent chipcontrol for reliable turning and boring cycles; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TCGT110202-MN2 WN10 indexable insert for boring and turning by Walter Tools The TCGT110202-MN2 WN10 is an indexable insert designed for turning and boring applications, offering a triangular 60° form with a compact corner radius for controlled cutting and fine surface results. Triangle 60° form for versatility Uncoated carbide grade WN10 for broad use 0.2 mm corner radius for fine finishing MN2 chipbreaker for stable chip control Optimised geometry for reproducible surface quality The triangular 60° form and 0.2 mm corner radius combine to deliver a consistent cutting edge geometry that supports predictable tool behaviour in many turning operations. The small corner radius reduces radial cutting forces and helps to achieve a finer surface finish when used in light finishing passes. The included MN2 chipbreaker assists chip formation and evacuation, reducing interruptions in the machining cycle and supporting higher process stability. These geometric features make the insert well suited to workflows where repeatability and part quality matter. Uncoated WN10 grade: economic and consistent cutting performance The insert is supplied in the WN10 uncoated carbide grade from Walter Tools, described in the product series as an open‑series carbide. As an uncoated carbide option, this grade can offer reliable wear behaviour in a wide range of turning tasks; however, material suitability should be verified against the product matrix to select the optimal grade for a specific workpiece material. The uncoated nature often simplifies edge preparation and can reduce sensitivity to certain cooling strategies, supporting a cost‑effective tool choice for volume production where consistent performance is required. Clear identification and smooth integration into production Marked as TCGT110202-MN2 and supplied under the Walter Tools designation, the insert is simple to identify for purchasing and inventory management. The tolerance class G and specified relief geometry (relief angle 7°) allow easy matching to toolholders and machine set‑ups, helping to reduce set‑up time and variation between tool changes. The concise technical designation supports quick selection in digital tool libraries and ERP systems, enabling faster reordering and fewer interruptions to the production flow. Contact Metav Werkzeuge for tailored application assistance on Walter Tools inserts such as the WN10 grade and to discuss availability and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TCGT110202-MN2-WN10-WALTER Designation: TCGT110202-MN2 WN10 Manufacturer: Walter Tools Product type: Indexable insert for boring and turning Series: Walter Schneidstoffsorte - Serie offen Core Dimensions Insert size: 11 mm Relief angle: 7° Corner radius: 0.2 mm Thickness code: 02 Features / Design Uncoated carbide grade WN10 Chipbreaker MN2 Triangle 60° form Tolerance class G Execution: T FAQ What materials is this insert suitable for? The TCGT110202-MN2 WN10 is an uncoated carbide insert; material suitability depends on the workpiece and cutting conditions, so check the Walter Tools product matrix to confirm compatibility for specific materials. What does the MN2 chipbreaker provide? The MN2 chipbreaker is designed to promote stable chip formation and evacuation during turning and boring, improving process reliability and reducing the risk of chip-related interruptions. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius helps to produce finer surface finishes and lower radial cutting forces in light finishing passes; for heavier roughing cuts, a larger radius would typically be selected. What does tolerance class G mean for tool set-up? The tolerance class G indicates the manufacturing tolerance level of the insert seating and geometry, supporting consistent fitment in corresponding toolholders and predictable repeatability during index changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for clarification. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise of the manufacturer Walter Tools.
TCGT110202-MN2 WNN10 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of reliable coated-carbide grade WNN10, a precise MN2 chipbreaker and a compact triangular 60° form for consistent, high-productivity machining. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TCGT110202-MN2 WNN10 indexable insert for boring and turning — Walter Tools, coated carbide, MN2 chipbreaker, triangular 60° TCGT110202-MN2 WNN10 is a coated-carbide indexable insert designed for versatile boring and turning operations in production environments Triangular 60° form for multi-edge use Coated carbide grade WNN10 for broad applications MN2 chipbreaker for controlled chip formation 0.2 mm corner radius for fine finishing Maximising process reliability with an engineered insert design The triangular insert offers a compact cutting geometry that supports repeatable tool engagement and reduced downtime. Thanks to the 60° triangle and the MN2 chipbreaker, chip formation is controlled, lowering the risk of built-up edge and improving swarf evacuation. This leads to a more predictable machining process and fewer interruptions. The combination of the WNN10 coated-carbide grade and the insert geometry supports a stable cutting edge, which is especially beneficial in series production where consistency and tool life are decisive. Coated-carbide grade WNN10: balanced wear resistance and versatility The WNN10 grade is a coated carbide class chosen for broad workpiece compatibility; the coating increases resistance to abrasive wear while maintaining a sharp cutting edge. For many common turning and boring tasks this means longer tool life and more consistent surface quality, reducing rework and machine idle time. Operators unfamiliar with carbide grades can consider WNN10 as a general-purpose, productive option — check the product matrix for exact material matches and cutting data to ensure optimal use. Geometry details that benefit surface finish and accuracy Key geometry parameters are engineered to influence the cutting result: the 0.2 mm corner radius supports fine finishing and helps achieve tight dimensional tolerances, while the 7° clearance angle reduces rubbing and promotes smooth cutting action. The insert’s compact size and 2.0 mm thickness (standard for this designation) enable secure clamping and minimise vibration in light to medium-duty turning and boring operations, which in turn enhances the achievable surface quality and repeatability. Practical application advice and selection notes When selecting this type of insert, choose the MN2 chipbreaker for operations where consistent small chips and stable forces are required; it is well suited to semi-finishing and finishing passes. The insert’s triangular form offers multiple indexable cutting edges, helping to lower tooling cost per part. For unfamiliar materials or critical components, consult the manufacturer’s product matrix to verify that WNN10 is the recommended grade for the specific workpiece material and machining parameters. For high-process reliability with Walter Tools’ WNN10 grade, contact Metav Werkzeuge for tailored cutting data and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TCGT110202-MN2-WNN10-WALTER Designation: TCGT110202-MN2 WNN10 Type: Boring/turning indexable insert Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core dimensions Inscribed circle / size: 11 mm Thickness: 2.0 mm Corner radius: 0.2 mm Clearance angle: 7° Tolerance class: G Special features Chipbreaker: MN2 Grade: WNN10 (coated carbide) Plate form: Triangle 60° Execution: T Material grade note: Katalogabhängig Application note: Check product matrix for workpiece suitability FAQ Which materials is this insert suited for? The insert in the TCGT110202-MN2 WNN10 designation is intended for a broad range of materials; the WNN10 coated-carbide grade is versatile, but the product matrix should be consulted to confirm suitability for a specific workpiece material. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip formation and evacuation, resulting in more stable cutting forces and improved process reliability for semi-finishing and finishing cuts. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius helps to achieve finer surface quality and better dimensional control during finishing passes, with reduced risk of edge chipping compared with sharper radii. Can this insert be indexed multiple times? The triangular 60° form provides multiple cutting edges, allowing several indexing operations per insert and reducing tooling cost per effective cutting edge. Is WNN10 suitable for high-speed machining? WNN10 is a coated-carbide grade designed for productive machining; for specific high-speed applications, verify recommended cutting speeds and parameters in the product matrix. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are mentioned exclusively for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
TCGT110202M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of precise finishing, reliable chip control and long tool life offered by the cermet grade. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. TCGT110202M-FP2 WEP10C – Turning and Boring Insert, Triangle 60°, 7° Clearance | Walter Tools The TCGT110202M-FP2 WEP10C is a triangular cermet insert designed for finishing applications in turning and boring where consistent surface quality and controlled chip formation are required. Triangle 60° geometry for versatile turning Cermet grade WEP10C for fine finishing 7° clearance angle for stable cutting action FP2 chipbreaker for controlled chip formation Achieve consistent finishing with cermet precision The TCGT110202M-FP2 WEP10C insert uses a cermet substrate that is formulated for fine finishing operations. The combination of the WEP10C grade and the triangle 60° geometry reduces built-up edge and produces a reliable surface finish, making the insert well suited for light to medium depth passes where dimensional stability and repeatable results matter. In practice, the cermet chemistry improves abrasion resistance compared with conventional grades, which helps to extend tool life and maintain component quality over longer production runs. Controlled chip flow and process stability A defining benefit of this insert is the FP2 chipbreaker, engineered to produce short, consistent chips under finishing conditions. Together with the 7° clearance angle, the design reduces cutting forces and vibration, contributing to stable machining and fewer interruptions. Controlled chip formation lowers the risk of component damage and eases chip handling at the machine, improving overall process reliability and reducing unplanned downtime. Simple selection and integration into existing toolholders The triangular form with a 0.2 mm corner radius offers multiple cutting edges per insert while keeping edge strength for finishing passes. The insert's designation and sizing follow common industry conventions, enabling straightforward integration into compatible toolholders. For material suitability, the insert belongs to the Walter Cermet series—consult the official product matrix to confirm appropriateness for specific workpiece materials and cutting conditions; this ensures optimum performance and cost-efficiency in production. Brand and provenance notice Protected trademarks and trade names remain the property of their respective owners. The mention of Walter Tools is for explanatory purposes only; there is no formal affiliation claimed. The offered article is an original, factory-new item from the manufacturer. Contact Metav Werkzeuge today to discuss the TCGT110202M-FP2 WEP10C insert and its suitability for specific finishing applications or to request tailored recommendations from our technical team. Technical data Article number: TCGT110202M-FP2-WEP10C-WALTER Designation: TCGT110202M-FP2 WEP10C Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter Cermet Facts Clearance angle: 7° Corner radius: 0.2 Plate form: Triangle 60° Plate size: 11 Plate thickness: 02 Tolerance class: G Special features Grade: WEP10C (Cermet) Chipbreaker: FP2 Execution: T Base designation: TCGT110202M-FP2 Material reference: Katalogabhängig Note: Check material suitability against the product matrix FAQ What applications suit this triangular cermet insert best? The TCGT110202M-FP2 WEP10C insert is primarily intended for finishing operations in turning and boring where a cermet grade provides a fine surface and long-lasting edge stability. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker promotes short, controllable chips, which improves process stability and reduces the chance of chip entanglement during finishing cuts. Is the 0.2 corner radius suitable for light finishing passes? Yes, the 0.2 corner radius balances edge sharpness and strength, making it appropriate for light to medium finishing passes while maintaining edge integrity. Can this insert be used for roughing operations? The WEP10C cermet grade and the 60° triangular form are optimised for finishing; roughing typically requires different geometries and grades—refer to the product matrix for exact recommendations. How many usable edges are available on the triangular insert? The triangular 60° geometry provides multiple indexed edges per insert, improving economy in high-volume production where edge changes are required. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany
TCGT110204-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver surface and the WSM01 grade delivers a reliable solution for machining stainless steels and heat‑resistant superalloys; the 60° triangular geometry with a corner radius 0.4 mm and 7° clearance ensures stable cutting edges and predictable chip formation. Order the TCGT110204-FM2 WSM01 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT110204-FM2 WSM01 – Boring/turning indexable insert, Tiger‑tec Silver, Walter Tools A robust TCGT110204-FM2 WSM01 insert designed for demanding turning and boring tasks, optimised for stainless steels and heat‑resistant superalloys in industrial machining applications Tiger‑tec Silver coating for wear resistance WSM01 grade for stainless steels and superalloys 60° triangular insert for versatile indexing 0.4 mm corner radius with 7° clearance angle Reliable performance on tough materials The coated carbide composition of this insert, offered in the Tiger‑tec Silver series and specified as WSM01, targets stainless steels and superalloys. The combination of a wear‑resistant surface and a chemistry tuned for heat resistance reduces flank wear and supports a stable cutting edge, which translates into longer service intervals and more consistent part dimensions. In practical terms, this means fewer tool changes and improved process uptime in serial production environments. Geometry that improves chip control and surface quality The 60° triangular insert geometry provides three usable corners for cost‑efficient indexing, while the FM2 chipbreaker promotes controlled chip segmentation under interrupted or continuous cutting. The corner radius 0.4 mm together with a 7° clearance angle balances edge strength and finishing capability, helping to maintain achievable surface roughness with reduced risk of built‑up edge on ductile materials. These geometry choices are particularly beneficial where a compromise between robustness and fine surface finish is required. Integration into machining systems and predictable handling With tolerance class G and a clearly defined designation, this indexable plate fits standard toolholders for turning and boring, allowing straightforward integration into existing tool sets. The insert’s specification supports process planning: selecting a coated carbide grade optimised for heat‑resistant alloys allows programmers and setup engineers to plan reliable cutting parameters and avoid trial‑and‑error cycles. For applications requiring repeatable quality and stable chip evacuation, this grade and geometry deliver measurable gains in productivity. For tailored advice on applying the Tiger‑tec Silver WSM01 insert to specific workpieces or cutting conditions, contact Metav Werkzeuge — our consultants provide application recommendations and tooling strategies. Technical data SKU: TCGT110204-FM2-WSM01-WALTER Designation: TCGT110204-FM2 WSM01 Manufacturer: Walter Tools Product type: Boring/turning indexable insert Core specifications Plate size: 11 mm Plate form: Dreieck 60° Corner radius: 0.4 mm Clearance angle: 7° Thickness code: 02 Chipbreaker: FM2 Tolerance class: G Material groups: S / M Materials & features Series: Tiger‑tec Silver Grade: WSM01 Coating: coated carbide Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) FAQ What materials is this insert suitable for? The TCGT110204-FM2 WSM01 from Walter Tools is formulated to machine stainless steels (M) and heat‑resistant superalloys/titanium (S) effectively. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on the insert promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving surface finish when turning or boring ductile and tough materials. Can the insert be indexed to use all cutting edges? Yes, the 60° triangular insert design allows indexing to three effective cutting edges, improving cost efficiency per insert change. What benefits does the Tiger‑tec Silver series provide? The Tiger‑tec Silver surface increases wear resistance and thermal stability, which helps maintain the cutting edge in demanding heat‑generating operations and extends useful tool life. Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer.
TCGT110204-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM20S grade provides excellent thermal resistance and stable chip formation for demanding materials; this improves tool life and machining consistency. Order the TCGT110204-FM2 WSM20S directly via Metav Werkzeuge or consult our specialists for material-specific recommendations and application support. TCGT110204-FM2 WSM20S – Indexable insert for turning and drilling, Tiger·tec Silver | Walter Tools A TCGT110204-FM2 WSM20S indexable insert designed for turning and boring operations in stainless steels and heat‑resistant superalloys, combining a robust geometry with a coated carbide grade for reliable machining. Tiger·tec Silver coating for thermal resistance WSM20S grade for stable chip formation FM2 chipbreaker for consistent chip control Triangular 60° shape with 0.4 mm radius Optimised grade and coating for demanding materials The combination of Tiger·tec Silver and the WSM20S grade gives a coated carbide solution that is tailored for materials classified as M (stainless steels) and S (heat‑resistant superalloys and titanium). This specification supports stable chip formation under high temperatures and reduces the tendency for built‑up edge on difficult materials. In practical terms, the improved thermal resistance and coating adhesion mean longer effective cutting times and fewer interruptions for edge dressing, which contributes directly to higher machining throughput and lower tool cost per component. Geometry engineered for edge stability and surface quality The triangular 60° shape and the 0.4 mm corner radius combine mechanical strength with accessible cutting edges for a range of turning and boring tasks. The FM2 chipbreaker is configured to control chip flow on interrupted cuts and variable depths of cut, producing repeatable chip segmentation that protects the cutting edge. A 7° clearance angle maintains a reliable flank relief, helping to avoid rubbing that can increase temperature and degrade surface finish. Together, these features support a balance of edge stability and surface quality where consistent component tolerances are required. Integration into CNC turning and drilling toolpaths As an indexable insert, the component integrates into standard toolholders for drilling/boring and turning operations, offering straightforward indexability and quick edge changes. The insert’s designation and tolerance class enable predictable setup and repeatability across production runs, supporting process reliability on machine tools. For users processing stainless steels or nickel‑based alloys, this insert from Walter Tools reduces the need for frequent rework and contributes to a stable machining process; the SKU TCGT110204-FM2 WSM20S is suited to job shops and production environments that demand consistent performance with coated carbide grades. Contact Metav Werkzeuge for application advice or to request sample runs with Walter Tools Tiger·tec Silver inserts; specialists are available to assist with grade selection and process parameters. Technical data Article number: TCGT110204-FM2-WSM20S-WALTER Designation: TCGT110204-FM2 ISO designation: TCGT110204-FM2 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM2 Execution: T Tolerance class: G Facts Clearance angle: 7° Corner radius: 0.4 mm Shape: triangular 60° Insert size: 11 Thickness designation: 02 Special features Coating: Tiger·tec Silver Material: coated carbide Applicable material groups: M (stainless steels), S (superalloys, titanium) Chip control: FM2 chipbreaker Tolerance class: G FAQ What materials is this insert suitable for? The TCGT110204-FM2 WSM20S is specified for M and S groups, meaning it is suitable for stainless steels and heat‑resistant superalloys/titanium, where the WSM20S grade aids stable chip formation. How does the Tiger·tec Silver coating help in machining? The Tiger·tec Silver system enhances thermal resistance and coating adhesion on the insert, improving cutting edge life and reducing wear when machining tough alloys compared to uncoated grades. What is the purpose of the FM2 chipbreaker? The FM2 chipbreaker promotes controlled chip formation and evacuation, especially on interrupted cuts or varying depth of cut, which supports dimensional stability and safer swarf handling. Can this insert be used for both turning and boring/drilling? Yes, the geometry and designation indicate suitability for turning and certain boring/drilling toolpaths when mounted in compatible toolholders; the indexable format enables quick edge changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT110204-FN2 WN10 WN10 Wendeplatten - Walter Tools
Combine the economy of the WN10 uncoated carbide with the FN2 chipbreaker and the 7° clearance to achieve consistent, productive turning results; order the insert via Metav Werkzeuge or contact our consultants for application-specific advice. TCGT110204-FN2 WN10 — Triangular turning insert, uncoated carbide, Walter Tools The TCGT110204-FN2 WN10 is a triangular 60° turning insert designed for general production turning where economical, uncoated carbide grades and reliable chip control are required Uncoated carbide grade WN10 Triangular 60° insert form 7° clearance for stable cutting Corner radius 0.4 mm for precision Productivity through proven grade and chip control The combination of the WN10 uncoated carbide grade and the FN2 chipbreaker offers a clear productivity advantage for many routine turning tasks. The uncoated carbide substrate provides a cost-effective cutting edge with consistent performance across a range of conditions, while the dedicated chipbreaker promotes controlled chip formation and evacuation. This results in reduced downtime for chip management and fewer interruptions in the machining cycle, supporting higher overall throughput on shop-floor turning operations. Geometry engineered for repeatable precision The triangular 60° form and the modest corner radius 0.4 mm deliver a balance between edge strength and surface finish. The three-sided geometry yields multiple usable cutting edges per insert, improving tool economy, while the 7° clearance reduces flank contact and friction for smoother cutting action. The insert thickness designation 02 and the size 11 contribute to a compact, rigid package suited to fine turning and finishing passes; the tolerance class G ensures dimensional consistency for predictable mounting and repeatable results. Clear application path and responsible selection This turning insert is supplied as the TCGT110204-FN2 WN10, part of the Walter open series, and its material specification is catalogue-dependent, so it is important to match the grade to the intended workpiece via the manufacturer’s product matrix. The insert’s uncoated nature often suits general-purpose turning where coatings are not required, but users should verify suitability for specific alloys and hardness ranges before selection. For tailored recommendations and process parameters, rely on supplier documentation or consult the technical team to align cut data with the expected component quality. For technical advice on the Walter Tools TCGT110204-FN2 WN10 or to discuss suitable applications and availability, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — our specialists will advise on selection and compatibility Technical data Article number: TCGT110204-FN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT110204-FN2 WN10 Walter Tools Manufacturer: Walter Tools Product type: Turning insert Designation: TCGT110204-FN2 WN10 Facts Insert size: 11 Thickness: 02 Relief angle: 7° Corner radius: 0.4 mm Insert form: Triangular 60° Tolerance class: G Special features Grade: WN10 (uncoated carbide) Chipbreaker: FN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material specification: Katalogabhängig FAQ What materials is this insert suited for? The suitability of the TCGT110204-FN2 WN10 depends on the Walter product matrix; the WN10 grade is an uncoated carbide and material compatibility should be checked against the manufacturer’s recommendations. How many usable cutting edges does the triangular insert provide? A triangular 60° insert like the TCGT110204-FN2 WN10 normally provides three cutting edges, offering good tool economy before indexation. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation and evacuation, which helps maintain stable cutting conditions and reduces interruptions due to problematic chips. What role does the 7° relief angle play? The 7° clearance reduces flank contact and friction, supporting smoother cutting action and improved surface finish during turning operations. Is the insert coated? The WN10 designation indicates an uncoated carbide grade; users should consult the catalogue details for exact substrate specifications. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter AG and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TCGT110204-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade (WNN10), a FN2 chipbreaker and a narrow relief angle for reliable edge stability and consistent chip control; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCGT110204-FN2 WNN10 triangular indexable insert – turning & boring, Walter Tools TCGT110204-FN2 WNN10 is a triangular indexable insert designed for turning and light boring operations, offering a compact geometry and a chipbreaker optimised for predictable chip formation Coated carbide grade WNN10 for robustness FN2 chipbreaker for controlled chips 7° relief angle for reduced cutting forces 60° triangular form with 0.4 mm corner radius Consistent chip control for predictable machining The triangular indexable insert provides stable chip formation thanks to the FN2 chipbreaker, which channels chips reliably during interrupted cuts and varying depths of cut. The carbide grade WNN10 is a coated hardmetal formulation intended for a broad range of general-purpose turning tasks; this combination reduces the risk of unexpected chip behaviour, supporting higher process reliability and fewer stoppages for clearing. For shop floors aiming to improve cycle-time predictability, the insert’s geometry simplifies toolpath planning while delivering consistent outcomes. Geometry that supports edge life and accurate contouring A 7° relief angle and a 0.4 mm corner radius balance edge strength with fine contour capability, enabling good surface finishes on short overhangs and finish passes. The 60° triangular shape gives three indexing positions, extending usable life per insert and lowering tooling expenditure per component. Where small radii and repeatable edge condition matter, this geometry helps maintain dimensional accuracy across runs, particularly when paired with stable clamping and appropriate cutting parameters. Practical selection and application guidance The insert is supplied in the designation TCGT110204-FN2 WNN10, with a plate size of 11 and a plate thickness indicated as 02; its coated hardmetal composition is listed as catalogue dependent, so verify compatibility with specific workpiece materials in the product matrix. For mixed-production environments, choose feeds and speeds that match the insert’s chip control characteristics to exploit its predictable wear behaviour and to reduce scrap rates. If ISO or material-specific recommendations are required, our technical consultants at Metav Werkzeuge can advise on best-fit parameters and toolholders. Contact Metav Werkzeuge for tailored recommendations on machining parameters or to confirm suitability for specific applications; Metav Werkzeuge can provide pragmatic support and supply the insert directly. Technical data Article number: TCGT110204-FN2-WNN10-WALTER Designation: TCGT110204-FN2 ISO designation: TCGT110204-FN2 WNN10 Facts Relief angle: 7° Corner radius: 0.4 Plate size: 11 Plate thickness: 02 Plate form: Dreieck 60° Tolerance class: G Special features Coating / Grade: WNN10 (coated hardmetal) Chipbreaker: FN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material information: Katalogabhängig FAQ What materials is this insert suited for? The insert with the WNN10 grade is a coated hardmetal solution intended for general-purpose turning; check the product matrix to confirm suitability for the specific workpiece material before use. How many cutting edges are available per insert? The triangular 60° form provides three indexed cutting edges on the insert, enabling multiple repositions for extended service life. What advantage does the FN2 chipbreaker provide? The FN2 chipbreaker delivers controlled chip formation and evacuation, reducing the likelihood of entanglement and improving process reliability in mixed turning and light boring operations. Is the relief angle suitable for interrupted cuts? With a 7° relief angle, the insert offers a compromise between strength and low cutting forces; it performs well in many interrupted-cut scenarios when set with appropriate feeds. How should the designation be quoted when ordering? Order using the ISO designation TCGT110204-FN2 WNN10 and reference the Walter Tools brand to ensure the correct coated grade and chipbreaker configuration. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Walter Tools is mentioned solely for product identification and clarification. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TCGT110204-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a purpose-designed MK4 chipbreaker for consistent chip control and long tool life; the result is reliable, productive turning in abrasive cast iron. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCGT110204-MK4 WKK20S turning insert — Tiger·tec Silver, for cast iron, Walter Tools TCGT110204-MK4 WKK20S is a coated carbide turning insert engineered for productive machining of cast iron components, offering stable chip formation and wear resistance in short‑chipping materials Tiger·tec Silver coated substrate Optimised for cast iron (ISO K) MK4 chipbreaker for stable chips Triangle 60° form with 7° relief angle Higher throughput through proven coating and chip control The Tiger·tec Silver coating combined with the WKK20S grade provides a balance of abrasion resistance and toughness that suits abrasive cast iron work. This results in reduced flank wear and extended tool life under typical wet and dry cutting conditions. The MK4 chipbreaker is designed to produce predictable, short chips, which reduces interruptions and increases usable cutting time. For production runs in foundry components or engine parts, the measurable outcome is fewer tool changes and more consistent cycle times. Consistent geometry for predictable machining performance A triangle 60° insert shape with a 0.4 mm corner radius and 7° relief angle delivers reliable engagement and repeatable cutting forces. The standard form factor supports stable toolholding and consistent workpiece finish in turning operations. The coded thickness and size ensure compatibility with common toolholders for triangular inserts, enabling quick replacement and minimal set‑up time. This geometrical consistency helps maintain process windows and simplifies CNC programme validation. Application clarity and material compatibility Rated for the ISO group K (cast iron), this grade is tuned to the abrasive nature and typical brittle chip formation of cast materials. The substrate and coating pairing make this insert suitable for finishing and medium‑duty roughing where controlled chip breaking and surface quality are priorities. For shops seeking predictable results in cast iron, the combination of WKK20S grade and Tiger·tec Silver technology provides a clear, technical advantage without unnecessary complexity. For process‑critical cast‑iron turning with Walter Tools’ Tiger·tec Silver technology, contact Metav Werkzeuge for tailored application support — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCGT110204-MK4-WKK20S-WALTER Designation: TCGT110204-MK4 WKK20S Manufacturer: Walter Tools Product type: Turning insert Series: Tiger·tec Silver Facts Relief angle: 7° Corner radius: 0.4 mm Inscribed circle / size: 11 Thickness code: 02 Form: Triangle 60° Special features Grade: WKK20S (coated carbide) Chipbreaker: MK4 Target material group: Cast iron (ISO K) Tolerance class: G Execution: T Stable chip formation, good wear resistance FAQ What materials is this insert suited for? The TCGT110204-MK4 WKK20S insert from Walter Tools is optimised for machining cast iron (ISO group K) and performs well where short, brittle chips and abrasive wear are typical. How does the MK4 chipbreaker improve productivity? The MK4 chipbreaker on this Walter Tools insert promotes consistent short chips, which reduces handling interruptions and supports continuous cutting, improving overall throughput. Is this grade suitable for finishing operations? Yes, the WKK20S grade with Tiger·tec Silver coating provides the wear resistance and edge stability required for finishing and medium‑duty turning in cast iron. What geometric features ensure repeatable results? The triangle 60° form, 7° relief angle and 0.4 mm corner radius offer repeatable engagement and cutting forces for stable machining and predictable surface quality. Can this insert be used in standard triangular holders? The TCGT110204‑MK4 family conforms to common triangular insert interfaces, allowing quick replacement in standard toolholders designed for this designation. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a leading provider of precision cutting tools. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the brands named. The offered article is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Tools; part of Walter AG, Tübingen, Germany
TCGT110204-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, secure chip control and a geometry optimised for turning difficult-to-machine alloys for a stable machining process. The grade WSM01 in the Tiger‑tec Silver series offers reliable edge life on stainless steels and superalloys; order directly via Metav Werkzeuge or consult our specialists for application support. TCGT110204-MM4 WSM01 indexable turning insert — Walter Tools, Tiger‑tec Silver, 7° clearance A single triangular indexable turning insert designed for demanding turning operations on stainless steels and heat-resistant superalloys, with MM4 chipbreaker and a 0.4 mm corner radius for controlled cutting behaviour Tiger‑tec Silver heat-resistant coating WSM01 grade for stainless & superalloys Triangular 60° form with 7° clearance MM4 chipbreaker for stable chip control High-performance cutting for difficult materials The Tiger‑tec Silver coating combined with the WSM01 carbide grade delivers improved thermal resistance and stable flank wear, which reduces unplanned tool changes. This geometry is particularly effective for machining stainless steels and superalloys where heat concentration and built-up edge are common problems. The result is a more predictable process and longer tool life, which supports higher productivity on complex turning tasks without sacrificing surface quality. Geometry and chip control for consistent results The triangular 60° insert shape with a 7° clearance and 0.4 mm corner radius provides a balance between strength and accessibility for varied turning profiles. The integrated MM4 chipbreaker promotes segmented chips and prevents long stringy swarf, improving workplace safety and machining continuity. For operations requiring stable chip evacuation and repeatable surface finish, this insert reduces interruptions and simplifies process parameter setup. Application-focused benefits and economical handling Designed for workshop and production environments, this indexable insert enables quick index changes and consistent edge performance across multiple stations. Its suitability for the ISO groups M and S means one grade can cover many applications in stainless and heat-resistant alloys, cutting inventory complexity. Through reduced downtime and predictable wear behaviour, the insert contributes to lower unit costs over production runs while maintaining high machining quality. For specific application advice or to order Walter Tools Tiger‑tec Silver inserts such as the TCGT110204-MM4 WSM01, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert selection and fast supply Technical Data Article number: TCGT110204-MM4-WSM01-WALTER ISO designation: TCGT110204-MM4 WSM01 Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: MM4 Form: Dreieck 60° Clearance angle: 7° Corner radius: 0,4 Plate size: 11 Plate thickness: 02 Tolerance class: G Facts Clearance angle: 7° Corner radius: 0,4 mm Plate size: 11 Plate thickness code: 02 Tolerance class: G Special features Coating: Tiger‑tec Silver Carbide grade: WSM01 (coated cemented carbide) Chip control: MM4 Suitable for: M (stainless steels), S (heat-resistant superalloys and titanium) Application: Turning of difficult-to-machine materials FAQ What materials can this insert machine reliably? The TCGT110204-MM4 WSM01 insert from Walter Tools is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat-resistant superalloys (including some titanium applications) where thermal stability and edge robustness are required. How does the MM4 chipbreaker help in production? The MM4 chipbreaker on the insert promotes short, segmented chips and consistent evacuation, reducing risk of chip entanglement and improving process reliability for turning operations with the Walter Tools Tiger‑tec Silver grade. Can this insert be used for finishing and semi-finishing? Yes; the combination of a 0.4 mm corner radius and the insert geometry supports both semi-finishing and light finishing passes, offering a compromise between edge strength and achievable surface finish. Is the insert indexable for quick tool change? The triangular design allows multiple usable edges per insert, enabling quick indexing and fast replacement to keep production interruptions to a minimum. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer.
TCGT110204-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the MM4 chipbreaker for improved tool life and consistent chip control, especially in demanding stainless steel and superalloy turning. Order the insert directly via Metav Werkzeuge or request application advice from the consultants for an optimised cutting solution. TCGT110204-MM4 WSM20S indexable turning insert, Tiger·tec Silver, for stainless steels and superalloys — Walter Tools A TCGT110204-MM4 WSM20S indexable turning insert engineered for robust performance in the machining of stainless steels (M) and heat-resistant superalloys (S) in heavy-duty turning operations Tiger·tec Silver coating for heat resistance MM4 chipbreaker for stable chip control Triangle 60° insert with 0.4 mm nose radius 7° relief angle for secure cutting edge Improved process reliability and extended tool life The Tiger·tec Silver coating is a high-performance, multilayer system designed to withstand thermal and mechanical loads typical of machining stainless steels and nickel-based alloys. Combined with a dedicated substrate, this technology reduces flank wear and supports a stable cutting edge, which translates into longer tool life and fewer insert changes. For production environments where uptime and repeatable component quality matter, the coated grade offers a predictable balance between wear resistance and toughness, helping to keep cycle times consistent and rework rates low. Consistent chip formation and secure cutting performance The MM4 chipbreaker geometry is tuned to promote controlled chip segmentation under the challenging conditions posed by tough, ductile materials. By guiding chip flow away from the workpiece and toolholder, the insert lowers the risk of built-up edge formation and machine interruptions. The combination of chip control and a 0.4 mm nose radius delivers good surface integrity while permitting reliable turning operations, even when intermittent cuts or varying depths of cut occur. This results in fewer process deviations and improved surface finish on difficult-to-machine alloys. Geometry and handling that support productivity The triangular 60° shape offers three effective cutting edges per index, helping to reduce tooling costs per part. A 7° relief angle provides positive engagement with the workpiece while protecting the cutting edge from excessive radial loading. The insert thickness and format suit common clamping systems, enabling quick indexing and straightforward tool management on standard toolholders. For shops focused on repeatable setup and efficient changeover, the geometry supports fast replacement and consistent datum positions across batches. Contact Metav Werkzeuge for availability, technical matching and application recommendations for the Walter Tools Tiger·tec Silver inserts — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number / SKU: TCGT110204-MM4-WSM20S-WALTER Label: Drehwendeschneidplatte TCGT110204-MM4 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade / Sort: WSM20S Product type: indexable turning insert Execution: T ISO designation: TCGT110204-MM4 WSM20S Facts Relief angle: 7° Nose radius: 0.4 mm Insert shape: Triangle 60° Size designation: 11 Thickness code: 02 Tolerance class: G Special features Chipbreaker: MM4 Material suitability: S / M (superalloys, stainless steels) Coating technology: Tiger·tec Silver Application focus: heavy-duty turning of difficult-to-machine materials Insert format: indexable turning insert with triangle geometry FAQ What materials is this insert intended for? The TCGT110204-MM4 WSM20S insert is specified for stainless steels (M) and heat-resistant superalloys (S), utilising the Tiger·tec Silver grade for thermal and wear resistance. How does the MM4 chipbreaker benefit production runs? The MM4 chipbreaker on this Walter Tools grade promotes stable chip formation and evacuation, reducing interruptions and contributing to consistent surface quality across batches. Can the triangular shape reduce tooling costs? Yes, the triangle 60° geometry provides three indexable cutting edges per insert, offering economical edge utilisation and straightforward indexing during series production. Is the 0.4 mm nose radius suitable for finishing operations? A 0.4 mm nose radius balances strength and finish capability; on the TCGT110204-MM4 WSM20S it supports acceptable surface integrity while maintaining edge robustness for demanding cuts. What cutting-edge protection does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances resistance to thermal degradation and flank wear, helping the insert maintain a sharp, stable cutting edge when machining heat-generating, tough materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TCGT110204-MN2 WN10 WN10 Wendeplatten - Walter Tools
Efficient chip control and high process stability through the WN10 uncoated carbide and MN2 chipbreaker enable productive drilling and turning cycles; benefit from the combination of wear resistance and consistent chip formation for uninterrupted workflows. Order the TCGT110204-MN2 WN10 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT110204-MN2 WN10 – Turning and Drilling Indexable Insert, Triangle 60° (Walter Tools) The TCGT110204-MN2 WN10 is a triangular 60° indexable insert designed for combined drilling/boring and turning applications, providing a 0.4 mm nose radius and 7° clearance for versatile, stable machining. Triangle 60° geometry for versatile machining Uncoated carbide grade WN10 for consistent wear MN2 chipbreaker for stable chip control Reliable chip control for steady productivity The triangular insert is engineered to deliver reliable results in cyclic production. The combination of the uncoated carbide WN10 and the MN2 chipbreaker promotes stable chip formation across varied cutting conditions, reducing interruptions caused by poor chip evacuation. The chipbreaker is a relief geometry that guides chips away from the cutting edge, which lowers the risk of welds and built-up edge on the tool; this results in longer effective cutting times and fewer index changes. Emphasis on predictable chip flow supports higher machine utilisation and a more efficient process chain. Geometry that balances strength and edge definition A 60° triangle and a 0.4 mm nose radius offer a compromise between robustness and surface finish. The small nose radius improves corner strength for intermittent cuts while still enabling acceptable surface quality on external and internal turning operations. The 7° clearance reduces flank contact and helps preserve the cutting edge under varied feed rates. As an indexable insert, this component allows quick indexing to fresh edges, minimising downtime and simplifying inventory management compared with solid tooling options. These geometric choices suit workshops seeking a single insert for multiple operations without sacrificing reliability. Process guidance and application flexibility Released as part of the Walter Schneidstoffsorte – Serie offen, the grade is described as an uncoated cemented carbide; material suitability should be verified against the supplier’s application matrix for a given workpiece. The open-series designation indicates broad-range use, but machining parameters depend on component material, machine rigidity and coolant strategy. For mixed or uncertain material batches, choosing the WN10 grade together with appropriate feeds and speeds yields a pragmatic balance of performance and tool life. Technical consultation is recommended when integrating this insert into critical production processes to align cutting data with shop-floor realities. For tailored advice or to secure stock of Walter Tools WN10 inserts, contact Metav Werkzeuge for order placement and application support: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: TCGT110204-MN2-WN10-WALTER Article designation: TCGT110204-MN2 WN10 Manufacturer: Walter Tools Product type: Drilling/boring and turning indexable insert Facts Plate form: Triangle 60° Nose radius: 0.4 mm Clearance angle: 7° Chipbreaker: MN2 Plate size: 11 Thickness code: 02 Tolerance class: G Material: catalogue-dependent Special features Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte – Serie offen Application recommendation: check product matrix for material suitability Geometry suited for combined drilling and turning operations FAQ What materials is this insert suitable for? Compatibility depends on the application matrix; the TCGT110204-MN2 WN10 insert is an uncoated carbide grade intended for broad-range use, and the specific workpiece material should be checked against Walter Tools’ recommendations. Can the insert be used for both boring and turning in the same setup? Yes, the geometry and chipbreaker design of the TCGT110204-MN2 WN10 facilitate combined drilling/boring and turning operations when machine and setup stiffness are sufficient. How does the MN2 chipbreaker affect machining performance? The MN2 chipbreaker improves chip control and evacuation, which reduces the likelihood of built-up edge and supports continuous production by keeping the cutting zone clear. What does the thickness code "02" mean for clamping and stability? The thickness code indicates the insert’s axial profile and should be matched with the appropriate clamping seat; correct seating ensures rigidity and repeatable results for the turning and drilling tasks. Is the WN10 grade coated or uncoated, and what is the expected benefit? WN10 is specified as an uncoated cemented carbide grade; the lack of coating can be advantageous for certain interrupted cuts and where edge strength and resistance to chipping take priority. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer Walter Tools.
TCGT110204-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Benefit from precise geometry, reliable chip control and the robustness of a coated carbide grade for consistent machining results; order directly via Metav Werkzeuge or consult their specialists for application matching and technical assistance. TCGT110204-MN2 WNN10 drilling/boring and turning indexable insert, triangle 60° 0.4 mm corner radius — Walter Tools The TCGT110204-MN2 WNN10 is an indexable insert designed for drilling, boring and turning operations where controlled chip formation and repeatable edge geometry are required Triangle 60° insert, 0.4 mm corner radius MN2 chipbreaker for controlled chips 7° relief angle for stable cutting Coated carbide WNN10, open series Consistent part quality through defined geometry The triangular 60° geometry combined with a 0.4 mm corner radius creates a predictable cutting edge that supports dimensional consistency and surface integrity in interrupted and continuous cuts. The modest relief angle of 7° reduces contact forces at the cutting nose, helping to limit vibration and improve tool life. These geometric parameters translate directly into fewer in-process variations and a more stable machining cycle, which contributes to efficient, repeatable production. Improved chip control and machining efficiency Equipped with the MN2 chipbreaker and produced in the WNN10 coated carbide series, this insert prioritises reliable chip formation and evacuation. The chipbreaker groove is shaped to fragment and guide chips away from the cutting zone, reducing the risk of re-cutting and tool damage. The coated cemented carbide substrate provides wear resistance under variable cutting conditions, enabling higher feed rates and consistent performance where process stability is essential. Application scope and selection guidance Materials suitability for this insert is catalog dependent; the grade belongs to Walter’s open series and is a coated cemented carbide type. For precise material-match decisions, consult the manufacturer’s product matrix to identify recommended cutting data and workpiece categories. This approach ensures the insert is applied where it delivers optimum value, avoiding over- or under-specification and supporting predictable tool life and surface results. Practical dimensions and integration into tool systems The insert is offered in size 11 with thickness code 02 and tolerance class G, matching common triangular insert pockets used in multi-operation holders. The designation TCGT110204-MN2 identifies the basic geometry and chipbreaker; the full ISO-style designation includes the WNN10 grade for clarity in ordering. These concise identifiers simplify tool management and spare-part logistics, and enable straightforward replacement during scheduled maintenance. Contact Metav Werkzeuge for an application review and specification match of the Walter Tools TCGT110204-MN2 WNN10 insert; technical data and ordering support are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TCGT110204-MN2-WNN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT110204-MN2 WNN10 Walter Tools Manufacturer: Walter Tools Product type: Indexable insert (drilling/boring and turning) Facts Insert size: 11 Thickness code: 02 Relief angle: 7° Corner radius: 0.4 Tolerance class: G Special features Triangle 60° plate form MN2 chipbreaker Coated cemented carbide grade WNN10 Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig Execution: T ISO designation: TCGT110204-MN2 WNN10 FAQ What cutting operations is this insert intended for? The insert is designed for combined drilling/boring and turning tasks; the TCGT110204-MN2 WNN10 insert from Walter Tools is optimised for applications requiring defined edge geometry and chip control. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of re-cutting and improving process stability when using the WNN10 coated carbide grade. Is the WNN10 grade suitable for all materials? WNN10 is a coated cemented carbide series; material suitability should be checked against the Walter product matrix to determine recommended workpiece categories and cutting data. Which dimensions identify this insert for ordering? Order by the full designation or SKU, for example TCGT110204-MN2 WNN10 or article number TCGT110204-MN2-WNN10-WALTER, specifying insert size 11 and thickness 02 if required. What tolerance and fit class does the insert have? The insert is supplied to tolerance class G, ensuring consistent fit in standard triangular insert pockets. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Trademarks and brand names are the property of their respective owners and are used here for explanatory purposes only. The offered article is an original, factory-new product of the manufacturer.
TCGT110204-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and the MP4 chipbreaker for consistent performance in steel turning operations; order the TCGT110204-MP4 WPP10G directly via Metav Werkzeuge or contact the consultants for application advice. TCGT110204-MP4 WPP10G – Indexable turning insert for steel, Tiger·tec Gold, Walter Tools TCGT110204-MP4 WPP10G is an indexable turning insert designed for efficient machining of steel (ISO P) with a coated-carbide grade optimised for high process reliability Tiger·tec Gold coating for extended tool life MP4 chipbreaker for reliable chip control Triangle 60° geometry for versatile turning Suitable for steel (ISO P) machining Consistent performance through advanced coating and grade selection The WPP10G grade, built on Tiger·tec Gold coating technology, delivers a balanced combination of wear resistance and toughness that supports longer tool life and predictable tool-change intervals. Designed as a coated carbide insert, the grade is tailored for the thermal and metallurgical conditions encountered when machining steel, ensuring stable chip formation and consistent cutting-edge behaviour. For production workflows, this reduces unexpected downtime and supports repeatable cycle times. Precise chip control and surface results with MP4 geometry The MP4 chipbreaker is engineered to produce short, controllable chips across a range of turning depths, which assists in maintaining a clean cutting zone and reduces the risk of chip entanglement. Combined with the Triangle 60° shape and 7° clearance, the geometry supports both light finishing passes and more robust roughing cuts. The 0.4 mm corner radius provides a compromise between edge strength and surface finish, enabling improved workpiece appearance while protecting the cutting edge under fluctuating cutting conditions. Application guidance and material suitability for reliable process planning Classified for ISO group P, the insert is intended primarily for unalloyed and alloyed steels and is suitable for typical steel machining tasks where a balance between wear resistance and edge toughness is required. The insert form factor and grade make it compatible with a wide range of standard toolholders used in turning operations. When selecting cutting parameters, the focus should be on creating stable engagement and effective heat dissipation to exploit the coated grade’s wear resistance and sustain surface quality. Economic benefits and integration into production workflows Using a consistently performing insert such as this reduces the frequency of tool changes and supports predictable maintenance cycles, which contributes to lower per-part tooling costs and more efficient machine utilisation. The insert’s geometry and grade are chosen to simplify inventory management by covering a broad spectrum of steel applications, thereby improving procurement efficiency and supporting continuous production. For process-focused applications requiring high process reliability with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: TCGT110204-MP4-WPP10G-WALTER Designation: TCGT110204-MP4 ISO designation: TCGT110204-MP4 WPP10G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger-tec Gold Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 11 Thickness: 02 Tolerance class: G Special features Grade: WPP10G (Tiger·tec Gold) Chipbreaker: MP4 Shape: Triangle 60° Material group: P (Steel) Execution: T FAQ What materials is this insert suitable for? The insert is designed for machining steel (ISO group P); the WPP10G grade is optimised for the typical heat and chip behaviour of steel. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker produces controllable, short chips that improve chip evacuation and contribute to stable surface quality during turning. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius offers a balance between edge strength and surface finish, allowing improved workpiece appearance while maintaining robustness under load. Is this insert compatible with standard toolholders? The triangular 60° form and the ISO designation make the insert compatible with standard turning toolholders that accept the TCGT family of inserts. Which brand manufactures this insert? This insert is supplied by Walter Tools and is part of the Tiger·tec Gold series, combining coated-carbide technology with industrial-grade chip control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original new goods of the manufacturer.
TCGT110204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold grade and the MP4 chipbreaker to improve productivity and chip control in steel turning; request cutting data or order directly via Metav Werkzeuge for straightforward integration into existing production. TCGT110204-MP4 WPP20G indexable turning insert for steel, Tiger·tec Gold, MP4 — Walter Tools The TCGT110204-MP4 WPP20G is a triangle indexable insert designed for turning steel components where consistent chip control and repeatable edge life are required. Tiger·tec Gold grade, coated carbide MP4 chipbreaker for controlled chips Triangle 60° geometry for versatile turning 7° clearance and 0.4 mm corner radius Reliable cutting performance for steel machining This insert combines the Tiger·tec Gold coating with a precision MP4 chipbreaker to deliver consistent cutting under the thermal and mechanical loads typical of steel machining. The graded carbide substrate and coating are matched to the P material group, which means the tool is optimised for unalloyed and alloyed steel where stable heat generation and predictable chip formation are expected. The result is improved process stability and fewer interruptions for manual chip clearing, supporting higher productive uptime and reliable cycle times. Extended edge life and process security A measured 7° clearance and a 0.4 mm corner radius produce a balance between strength and finish quality: the clearance reduces rubbing and heat, while the corner radius supports robust cutting edges that resist chipping. The triangular 60° shape offers multiple indexable edges per insert, lowering tooling costs per edge and enabling quick indexing during routine maintenance. These geometric choices together enhance reproducibility in serial production and reduce the need for frequent tool changes. Practical advantages and explanation of features The MP4 chipbreaker is engineered for regular steel turning, promoting short, controllable chips that evacuate reliably in most lathe setups. "Tiger·tec Gold" refers to the coated carbide technology that improves wear resistance and adhesion under typical cutting temperatures; coated carbide means a hard substrate with a thin, engineered coating that reduces flank wear. For shops less familiar with insert codes: the designation indicates insert geometry, chipbreaker style and grade—information typically used to select appropriate feeds and speeds for a given part material. Compatibility, handling and target applications The insert is presented in the established ISO format for triangle turning inserts and is suited to general finishing and medium-steel roughing operations in component, toolroom and contract machining environments. As an indexable insert from Walter Tools, the component fits standard toolholders accepting the corresponding insert size and thickness code. For production planners and machinists seeking predictable tool life and consistent surface quality, this insert is a practical choice that integrates with common turning tool systems. Contact Metav Werkzeuge for tailored cutting data, procurement guidance and availability of Walter Tools inserts — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: TCGT110204-MP4-WPP20G-WALTER Designation: TCGT110204-MP4 WPP20G Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Insert shape: Triangle 60° Size: 11 Thickness code: 02 Corner radius: 0.4 mm Clearance angle: 7° Tolerance class: G Special features Grade: WPP20G (Tiger·tec Gold) Chipbreaker: MP4 Substrate/coating: coated carbide Material application: Steel (P) Series: Tiger·tec Gold Execution: T FAQ What materials is this insert designed for? The insert is graded WPP20G and intended for steel (P); the grade and chipbreaker are tuned for the heat and chip characteristics of unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes controlled, short chips and stable evacuation during turning; this reduces the risk of entanglement and supports uninterrupted production with the TCGT110204-MP4 WPP20G insert. How many usable edges does the triangular insert provide? The triangle 60° geometry offers multiple indexable edges, allowing quick indexing to a fresh edge and lowering cost per effective cutting edge. Which series and coating does this insert use? This insert belongs to the Tiger·tec Gold series and uses a coated carbide substrate, combining wear resistance with predictable performance in steel turning. Is this insert compatible with standard toolholders? Yes; the ISO-style designation and dimensions make the insert compatible with holders designed for triangle 60° inserts of the corresponding size and thickness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TCGT110204M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of WEP10C cermet durability and a FP2 chipbreaker for consistent chip control; the triangle 60° geometry with a 0.4 mm nose radius ensures predictable cutting performance and repeatable results. Order the insert directly via Metav Werkzeuge or consult our specialists for machining guidance. TCGT110204M-FP2 WEP10C triangle 60° indexable insert — Walter Tools, cermet grade with FP2 chipbreaker TCGT110204M-FP2 WEP10C is an indexable cutting insert designed for drilling and turning applications where stable chip formation and extended tool life are required Cermet grade WEP10C for long tool life FP2 chipbreaker for reliable chip control Triangle 60° form with 0.4 mm nose radius Clearance angle 7° for precise engagement Longer production runs with consistent wear behaviour The WEP10C cermet composition offers a balance between hardness and toughness that supports extended tool life in series production. As a cermet-grade insert, it resists abrasion while preserving edge integrity, which reduces the frequency of tool changes and machine downtime. For manufacturing environments focused on throughput, this characteristic translates into measurable efficiency gains and more predictable process windows. The design reduces flank wear and helps maintain dimensional stability over repeated indexing cycles. Geometry engineered for repeatable accuracy The triangle 60° shape and the specified 0.4 mm nose radius provide a stable cutting point for a range of turning and boring tasks. The moderate clearance angle of 7° controls contact conditions between insert and workpiece, improving surface finish and reducing tool chatter. These geometric choices make the insert suitable for operations that demand repeatability in diameters and profiles, while the standard form factor supports straightforward indexing and set-up in common toolholders. Improved chip control and process security The FP2 chipbreaker is optimised to break and direct chips reliably under varying cutting conditions. Effective chip control enhances operator safety and protects workpiece surfaces from chip recutting. Together with the cermet grade, the chipbreaker contributes to a stable machining process, reducing unexpected interruptions and supporting consistent cycle times. For materials that generate long, stringy chips in conventional tooling, this insert promotes safer handling and cleaner machining environments. Practical considerations and compatible applications The insert is part of the Walter Cermet series and is supplied in the execution code T with a thickness code of 02 and a nominal size of 11 (refer to toolholder compatibility for exact fit). Material specifications are catalogue-dependent; check the product matrix for recommended workpiece materials and cutting data. The combination of cermet grade and FP2 geometry suits fine finishing and semi-finishing operations where surface integrity and tool life are priorities. Replacing or indexing the insert follows standard procedures for triangular inserts and retains the original clamping precision when correctly installed. For machining tasks that prioritise edge life and controlled chips, request availability and technical notes from Metav Werkzeuge for the Walter Tools TCGT110204M-FP2 WEP10C insert and receive tailored machining recommendations. Technical data Article number: TCGT110204M-FP2-WEP10C-WALTER Name: TCGT110204M-FP2 WEP10C Manufacturer: Walter Tools Product type: Indexable insert for drilling/turning Core specifications Clearance angle: 7° Corner radius: 0.4 mm Shape: Triangle 60° Size: 11 Thickness code: 02 Tolerance class: G Designs and special features Series: Walter Cermet Grade: WEP10C (cermet) Chipbreaker: FP2 Execution: T Material: catalogue-dependent Product designation without grade: TCGT110204M-FP2 FAQ What materials is the insert suitable for? The TCGT110204M-FP2 WEP10C insert is a cermet grade; material suitability is catalogue-dependent, so check the product matrix or technical datasheet for recommended workpiece materials How does the FP2 chipbreaker affect machining? The FP2 chipbreaker on this Walter Tools insert is shaped to direct and break chips reliably, improving process security and reducing the risk of chip-related surface damage Can the insert be used for both turning and boring operations? Yes, the geometry and form of this indexable insert allow application in both drilling/bore-turning and conventional turning toolholders when the holder accepts the triangle 60° insert What does the size code 11 indicate? Size 11 refers to the insert’s nominal dimension for compatibility with corresponding toolholders; confirm toolholder specifications before mounting Is the WEP10C grade suited for finishing passes? WEP10C’s cermet properties support fine finishing and semi-finishing by maintaining edge integrity and delivering consistent surface quality Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand-new product of the manufacturer.
TCGT110204ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of Walter Cermet durability, precise FX4 chip control, and a compact triangular form for reliable finishing operations; order this turning insert via Metav Werkzeuge or consult the specialists for application support. TCGT110204ML-FX4 WEP01C — Turning insert (Walter Tools), Cermet, FX4 chipbreaker The TCGT110204ML-FX4 WEP01C is a triangular 60° turning insert from the Walter Cermet series designed for precision machining and consistent chip control in finishing applications. Walter Cermet grade for finishing FX4 chipbreaker for controlled chips 60° triangular geometry for versatile use 0.4 mm corner radius for fine edges Consistent finishing and predictable tool life The Cermet composition of this insert emphasises wear resistance and edge retention, delivering consistent surface quality during finishing passes. The combination of a 0.4 mm corner radius and the FX4 chipbreaker supports low-vibration cutting and stable material removal, which in turn reduces the need for rework. The insert’s 60° triangle geometry permits economical indexing and multiple cutting edges per insert, optimising cost efficiency in medium- to high-volume turning operations. For users less familiar with the term, cermet denotes a ceramic–metal composite that maintains hardness at elevated temperatures and yields fine surface finishes compared with conventional carbides. Efficient chip control for safer, cleaner machining The FX4 chipbreaker is configured to generate short, segmented chips in finishing conditions, improving swarf evacuation and lowering the risk of long, entangling chips. This controlled chip formation contributes directly to process reliability and reduces machine stoppages for manual chip clearing. The insert’s 7° rake angle helps to moderate cutting forces while maintaining a sharp effective cutting edge, so feed and depth adjustments result in measurable improvements in productivity. Clear chip flow also helps maintain coolant access to the cutting zone, supporting consistent temperature control and prolonging the effective life of the cutting edge. Selection guidance and practical advantages in workshop use Selection should follow the manufacturer’s application matrix to match the WEP01C grade with the workpiece material and machining strategy; the grade is intended for finishing and requires parameter validation against the specific material. The insert’s compact thickness code 02 and size designation of 11 ensure compatibility with standard toolholders that accept this geometry, allowing straightforward retrofitting in toolrooms. The triangular form provides three usable corners per indexable edge, enhancing economy of use. Given the Walter Tools pedigree for precise tooling, this insert supports repeatable results and complements process chains that demand high surface integrity. For finishing applications where edge stability and controlled chip formation are critical, contact Metav Werkzeuge for detailed technical advice and availability of the TCGT110204ML-FX4 WEP01C insert — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930. Technical Data Article number: TCGT110204ML-FX4-WEP01C-WALTER Article name: TCGT110204ML-FX4 WEP01C Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core Specifications Geometry: Triangle 60° Corner radius: 0.4 mm Rake angle: 7° Size: 11 Thickness code: 02 Tolerance class: G Features & Applications Series: Walter Cermet Grade: WEP01C (Cermet) Chipbreaker: FX4 Execution: T Material: Katalogabhängig Label without grade: TCGT110204ML-FX4 FAQ What materials is the WEP01C grade suitable for? Suitability depends on the manufacturer’s application matrix; the WEP01C cermet grade is primarily intended for finishing tasks and its exact workpiece compatibility should be verified against the specific product matrix for the insert. What is the functional benefit of the FX4 chipbreaker? The FX4 chipbreaker promotes short, controlled chips under finishing conditions, improving swarf evacuation and reducing the likelihood of chip entanglement while supporting consistent surface quality. Which dimensions are most relevant when replacing an insert with this designation? Key dimensions are the 60° triangular geometry, 0.4 mm corner radius, 7° rake angle, size 11 and thickness code 02; these determine toolholder fit and the insert’s effective cutting edge geometry. How should this insert be integrated into an existing turning process? Integration requires validation of cutting parameters against the toolmaker’s data and the workpiece material; the triangular form allows economical indexing and the Cermet grade favours finishing passes for improved surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original factory-new product of the respective manufacturer.
TCGT110204MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Benefit from the combination of the WEP01C cermet grade and the FX4 chipbreaker for consistent chip control and improved tool life, while the triangular 60° form and 7° clearance deliver reliable engagement; order this insert directly via Metav Werkzeuge or consult our specialists for process optimisation. TCGT110204MR-FX4 WEP01C — Indexable turning insert, FX4 chipbreaker, 7° clearance — Walter Tools The TCGT110204MR-FX4 WEP01C is an indexable turning insert from the Walter Cermet series, engineered for controlled chip formation and dependable cutting performance in general turning applications with a triangular 60° geometry and a 0.4 mm corner radius. Cermet grade WEP01C for wear resistance FX4 chipbreaker for controlled chip formation 7° clearance for stable cutting geometry Triangle 60° with 0.4 mm corner radius Increase process stability with cermet cutting performance The Walter Cermet grade WEP01C offers a balance of wear resistance and edge security that benefits repetitive turning operations where surface finish and tool life matter. As a cermet material, the grade combines ceramic hardness with metal toughness to slow flank wear and reduce built-up edge compared with conventional grades. In practice, this means longer intervals between indexings and more consistent component tolerances, which supports higher overall productivity on batch runs and reduces rework. The FX4 chipbreaker works together with the cermet substrate to shape chips predictably, helping to avoid snarled chips on automatic lathes and improving cycle-time reliability. Practical design that simplifies machining decisions The insert’s triangular 60° geometry and 0.4 mm corner radius give a versatile cutting profile suitable for both finishing and light roughing, while the 7° clearance preserves the correct cutting angle and prevents rubbing on the flank. These design choices reduce the need for frequent re-grinding or special holders and make the insert straightforward to integrate into existing toolholders. The FX4 chip control promotes short, segmental chips for safer evacuation, an essential advantage when running automated programmes or when working on parts with tight access. The combination of geometry and chipbreaker therefore delivers a predictable, easy-to-set-up solution for many turning tasks. Material guidance and application notes for reliable results This indexable turning insert is offered in a cermet grade; check the product matrix for specific workpiece compatibility since the grade performs best where fine surface quality and constant tool life are priorities. The insert is part of the Walter Cermet series and features a catalogue-dependent substrate and coating selection, which allows adaptation to different machining strategies. For best results, pair the insert with appropriate coolant strategy and cutting parameters that reflect the cermet characteristics—moderate cutting speeds, stable feeds, and controlled depths of cut will extend life and surface quality. When in doubt, assess the machining case with the technical data supplied here and consult on parameter tuning to match component material and hardness. For application-specific recommendations, ordering or further technical clarification, please contact Metav Werkzeuge — our consultants provide targeted advice and parameter support to match the Walter Tools insert to the process. Technical details SKU: TCGT110204MR-FX4-WEP01C-WALTER Article designation: TCGT110204MR-FX4 ISO designation: TCGT110204MR-FX4 WEP01C Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Inscribed circle / size: 11 Thickness: 02 Features & materials Grade: WEP01C (Cermet) Chipbreaker: FX4 Geometry: Triangle 60° Series: Walter Cermet Tolerance class: G Substrate/coating: Catalogue-dependent FAQ What applications suit this insert best? The TCGT110204MR-FX4 WEP01C turning insert from Walter Tools is designed for general turning where controlled chip formation and good surface finish are required; its triangular geometry and 0.4 mm corner radius make it suitable for finishing and light roughing operations. How does the FX4 chipbreaker improve machining? The FX4 chipbreaker on the WEP01C grade shapes chips into short, controllable segments, reducing chip entanglement and improving evacuation on automatic lathes, which supports safer and more stable production cycles. Is the product compatible with different toolholders? The insert follows standard indexable insert geometry (triangle 60°) and is compatible with toolholders that accept the TCGT form; refer to the ISO designation TCGT110204MR-FX4 WEP01C and the toolholder manufacturer’s guidance for seating and clamping details. What does the cermet grade WEP01C mean for tool life? WEP01C, as a cermet grade in the Walter Cermet series, prioritises wear resistance and edge integrity; when used with recommended cutting parameters, the insert typically provides longer wear life and stable surface quality compared with some conventional grades. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. This article is an original, factory-new product from Walter Tools.
TCGT110208-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver series' combination of high thermal stability and reliable chip control for consistent machining of tough alloys and stainless steel; the WSM01 coated carbide grade and MM4 chipformer ensure durable edges and predictable chips—contact Metav Werkzeuge for material‑specific recommendations or order through Metav Werkzeuge for a dependable supply. TCGT110208-MM4 WSM01 turning indexable insert — Triangle 60°, 7° clearance (Walter Tools) TCGT110208-MM4 WSM01 is a triangle‑form turning insert designed for heavy and heat‑resistant materials, optimised for secure chip formation and long edge life in demanding production environments Tiger‑tec Silver coated carbide grade WSM01 Triangle 60° form for versatile turning applications 7° clearance angle for reduced cutting forces MM4 chipformer for stable chip control Increased productivity through material‑specific grade and coating The combination of the WSM01 coated carbide and the Tiger‑tec Silver series gives a clear production advantage when machining high‑temperature alloys and stainless steel. The grade is engineered to resist thermal degradation and to maintain a sharp cutting edge under intermittent and continuous engagement. As a result, the insert delivers consistent tool life and reduces unplanned tool changes, supporting higher machine uptime and predictable cycle times. The coated carbide surface promotes wear resistance and improved heat management during elevated cutting speeds. Reliable chip control and geometric advantages for safer turning Built with a MM4 chipformer and a Triangle 60° profile, the insert supports controlled chip flow and accessibility in confined toolholders. The 0.8 mm corner radius balances edge strength with surface finish, while the 7° clearance angle minimises rubbing and lowers cutting forces. These geometric choices reduce vibration and burr formation, which leads to more stable cutting and improved surface integrity on the workpiece. For workshops processing difficult alloys, the geometry reduces the likelihood of built‑up edge and eases downstream finishing operations. Application focus: tough alloys and stainless steel made manageable This grade is particularly suited to materials classified under ISO groups M and S, meaning it is effective on stainless steel and on heat‑resistant superalloys or titanium. The chemistry and coating of the grade help to avoid adhesion and edge breakdown that commonly occur with these materials, enabling longer uninterrupted runs and fewer tool indexings. In practice, that translates into lower unit costs and steadier quality for series production where repeatability matters most. Contact Metav Werkzeuge today for tailored cutting parameters and delivery options, or ask for consultancy on integrating the Walter Tools TCGT110208-MM4 WSM01 insert into existing turning processes. Technical data Article number: TCGT110208-MM4-WSM01-WALTER Product type: Turning indexable insert Series: Tiger‑tec Silver Grade: WSM01 Manufacturer: Walter Tools Facts Form: Triangle 60° Clearance angle: 7° Corner radius: 0.8 mm Size: 11 Thickness: 02 Chipformer: MM4 Tolerance class: G Material indication: S / M Special features Coated carbide grade (WSM01) Optimised for stainless steel and heat‑resistant alloys Stable chip control for safer turning Designed for productive machining and long edge life FAQ What materials is this insert suitable for? The insert is suitable for materials in ISO groups M and S; it is specifically intended for stainless steel and heat‑resistant superalloys or titanium, as per the WSM01 grade characteristics. How does the MM4 chipformer affect machining? The MM4 chipformer improves chip control, producing predictable chip shapes that reduce the risk of entanglement and help maintain stable cutting conditions when machining tough materials. Is this insert part of a coated series? Yes, the insert belongs to the Tiger‑tec Silver series and is a coated carbide grade (WSM01), providing enhanced thermal resistance and wear protection during demanding turning operations. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength for interrupted cuts and heavy feeds while still permitting a good surface finish, balancing tool life and part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT110208-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WPP20G grade for productive chip control and consistent wear resistance; the 7° relief angle and 0.8 mm corner radius support stable cutting and repeatable results. Order the TCGT110208-MP4 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. TCGT110208-MP4 WPP20G triangular insert for steel machining — Walter Tools (Tiger‑tec Gold, 7° relief) A TCGT110208-MP4 WPP20G indexable triangular insert designed for turning and boring applications, optimised for the machining of steel (ISO P) with a Tiger‑tec Gold coated carbide body. Tiger‑tec Gold coated grade WPP20G Optimised for machining steel (ISO P) 7° relief angle for stable cutting Triangle 60° with 0.8 mm corner radius Reliable chip control for continuous production The coated carbide grade delivers stable chip formation under the thermal and mechanical loads typical of steel machining. The MP4 chipbreaker geometry manages chip flow reliably in a wide range of cutting depths, reducing the risk of entanglement and downtime. As a result, process reliability is improved and inspection effort can be reduced, which supports higher throughput in serial turning operations. This insert from Walter Tools is intended for productive machining where consistent chip behaviour is a priority. Predictable wear resistance for longer tool life The combination of the WPP20G grade and Tiger‑tec Gold coating provides a balance of wear resistance and toughness suitable for unalloyed and alloyed steels. This formulation aims to extend the interval between tool changes by protecting the cutting edge against abrasive wear while maintaining a stable cutting edge under intermittent loads. The result is longer tool life and reduced tooling costs per component when compared with uncoated or less-optimised grades. Geometry optimised for precision and surface finish The triangular 60° form with a 0.8 mm corner radius and a 7° relief angle enables a robust cutting edge that supports dimensionally accurate turning and consistent surface quality. The insert geometry is engineered to deliver repeatable results in finishing and semi-finishing passes, with the corner radius assisting in achieving the required profile while maintaining edge strength. The combination of form and grade assists machinists in achieving precision without sacrificing stability. Application guidance and integration into tool systems Designed as a direct fit in standard triangular pockets, the insert is compatible with a wide range of toolholders that accept this ISO designation. The coated carbide construction and chipformer are suitable for typical steel categories listed under ISO P; selection of cutting parameters can be guided by the MP4 chipbreaker performance and the grade’s intended application range. For specific cycle optimisation and fixture integration, Metav Werkzeuge can provide tailored advice and matching toolholder recommendations. For high-process reliability with Walter Tools’ Tiger‑tec Gold grade, contact Metav Werkzeuge for expert selection and availability—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best insert and holder combination for your application. Technical Data SKU: TCGT110208-MP4-WPP20G-WALTER Designation: TCGT110208-MP4 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Inscribed circle / size: 11 mm Thickness code: 02 Tolerance class: G Special features Coating: Tiger‑tec Gold Chipbreaker: MP4 Material: coated carbide Insert form: Triangle 60° Application: Steel (ISO P) FAQ Is this insert suitable for alloyed steels and general steel machining? The TCGT110208-MP4 WPP20G is specified for steel (ISO P) and the WPP20G grade is formulated to handle a range of unalloyed and alloyed steels with consistent performance. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances wear resistance and high-temperature stability, which helps the insert maintain edge integrity and deliver longer tool life under continuous steel cutting conditions. When is the MP4 chipbreaker recommended? The MP4 chipbreaker is recommended for applications requiring controlled chip flow across varied cutting depths in steel machining, supporting reliable evacuation and reduced risk of chip-related interruptions. Can this insert be used for stainless steel or other specialised materials? The designation and supplied data indicate focus on ISO P (steel). Use for stainless steel or other specialised materials is not specified for this grade; consult Metav Werkzeuge for alternative grades tailored to those materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes and to clarify product compatibility. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer. Walter Tools is a registered brand.
TCGT16T302-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver grade WSM20S with an FM2 chipbreaker delivers stable chip formation and extended edge life for demanding materials; order the insert directly via Metav Werkzeuge or consult our specialists for tailored machining advice. TCGT16T302-FM2 WSM20S — Triangular indexable turning insert, 60° corner, Walter Tools The TCGT16T302-FM2 WSM20S is a 60° triangular indexable insert optimised for heavy-duty turning and boring of rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coated carbide grade WSM20S Designed for rostfreier Stahl and superalloys FM2 chipbreaker for secure chip control 60° triangle with 0.2 mm corner radius Higher process reliability with a heat‑resistant grade The combination of the Tiger·tec Silver coating and the WSM20S grade provides enhanced thermal resistance and wear control during prolonged cutting. This results in a more consistent cutting edge under the high temperatures typical of machining rostfreier Stahl and nickel‑base alloys. The insert’s coating technology reduces flank wear and supports repeatable cycle times, which contributes directly to improved machine uptime and predictable tool change intervals. Geometry that secures chip flow and surface quality With its FM2 chipbreaker and a sharp 0.2 mm corner radius on a 60° triangular platform, the insert offers reliable chip segmentation and evacuation in discontinuous and gummy materials. The 7° clearance angle reduces rubbing at the flank, lowering cutting forces and helping to achieve a stable surface finish. For shops looking to balance productivity and component quality, this geometry minimises built‑up edge and supports steady metal removal rates. Versatile choice for tough materials and demanding applications The grade’s material designation S / M signals suitability for both heat‑resistant superalloys/titanium and rostfreier Stahl. Where conventional grades struggle with thermal load or adhesion, this insert maintains edge integrity and reduces the risk of premature failure. The triangular form offers three usable cutting edges per insert, delivering cost efficiency and simplified inventory management for mixed‑material production. Practical benefits for workshop integration The insert’s standard ISO designation and stable tolerance class facilitate straightforward tooling changes and consistent clamping. The compact geometry (size 16, plate thickness T3) suits a wide range of turning and boring toolholders and simplifies reconditioning strategies. When combined with suitable cutting data and coolant strategy, the insert helps to shorten setup times and supports predictable component tolerances. For specification checks, application recommendations or to secure stock of the Walter Tools TCGT16T302‑FM2 WSM20S insert, contact Metav Werkzeuge GmbH by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TCGT16T302-FM2-WSM20S-WALTER Article designation: TCGT16T302-FM2 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Insert size: 16 Plate thickness: T3 Corner radius: 0.2 mm Clearance angle: 7° Plate form: Triangle 60° Tolerance class: G Special features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM2 Material designation: S / M Application: rostfreier Stahl and heat‑resistant superalloys/titanium FAQ What material groups is this insert suitable for? The insert is specified for material groups M and S; the WSM20S grade supports machining of rostfreier Stahl and heat‑resistant superalloys or titanium. How does the FM2 chipbreaker influence machining? The FM2 chipbreaker promotes controlled chip formation and reliable evacuation, improving surface quality and reducing interruptions caused by erratic chips when using the TCGT16T302‑FM2 WSM20S insert. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting edges per insert, enabling economical edge rotation and consistent part quality with the Walter Tools series. Is this insert suitable for finishing or roughing operations? Depending on insert geometry and cutting parameters, the grade and chipbreaker combination suit both medium and finishing passes on rostfreier Stahl and superalloys, with the FM2 geometry particularly effective where chip control is critical. What are the key geometry values to check when selecting a toolholder? Check the insert size (16), plate thickness (T3), 0.2 mm corner radius and 60° triangle form to ensure compatibility with the chosen toolholder and to achieve the intended cutting performance. Protected trademarks and trade names are the property of their respective owners. Mark names and protected brand designations are cited exclusively for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com