TCGT16T302-MN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of stable 60° clamping geometry and the WN10 uncoated carbide for consistent machining results; the MN2 chipbreaker and 0.2 mm corner radius deliver controlled chips and improved surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. TCGT16T302-MN2 WN10 – Triangle 60° indexable insert for drilling, reaming and turning by Walter Tools A TCGT16T302-MN2 WN10 indexable insert engineered to provide stable clamping and predictable cutting behaviour across drilling, reaming and versatile turning tasks in CNC machining. Triangle 60° form for stable clamping Uncoated carbide grade WN10 MN2 chipbreaker for controlled chips 0.2 mm corner radius for fine finishes Consistent clamping and dimensional stability for reliable cycles The triangular 60° geometry combined with a T3 thickness produces a compact insert that increases insert stability under radial loads, reducing the risk of chatter during interrupted cuts. With a 0.2 mm corner radius, the insert supports improved surface quality on bore and turning operations while protecting the cutting edge during entry and exit. These characteristics translate into predictable tool behaviour and repeatability in series production, which is particularly valuable where cycle consistency is essential and setup time must be minimised. Controlled chip formation and predictable cutting performance Equipped with the MN2 chipbreaker and made from WN10 uncoated carbide, this insert prioritises controlled chip formation for effective evacuation in drilling and reaming applications as well as in finishing turns. The absence of a coating often benefits specific process windows where built-up edge or thermal conductivity behaviour is preferable; however, material compatibility should be verified against the product matrix. The specified 7° relief angle further assists in achieving a consistent cutting geometry and contributes to stable cutting forces, helping to maintain surface integrity and dimensional accuracy. Efficient integration into CNC toolholders and adaptable application scope The ISO designation and compact form factor enable straightforward integration into standard triangular indexable holders used for combined drilling/reaming and light turning tasks. Tolerance class G reflects manufacturing precision of the insert, aiding accurate positioning in the tool pocket and reducing the need for repeated adjustment. For workshops seeking a practical, no-frills carbide option for a range of operations, this cutting insert provides a clear balance between handling ease and machining performance. For specific workpiece materials and optimal cutting data, consult the product matrix before selection to ensure the grade suits the intended application. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools WN10 inserts for precision machining tasks Technical data Article number: TCGT16T302-MN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT16T302-MN2 WN10 Walter Tools Manufacturer: Walter Tools Product type: Indexable insert (drilling/reaming and turning) Numbers / Core technical data Relief angle: 7° Corner radius: 0.2 mm Insert size: 16 Thickness: T3 Tolerance class: G Designs / Special features Shape: Triangle 60° Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen ISO designation: TCGT16T302-MN2 WN10 FAQ What materials is this insert suitable for? The WN10 grade is an uncoated carbide; suitability depends on the workpiece—please check the product matrix for precise material recommendations before use with specific steels or alloys. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes short, controllable chips and improved evacuation, which is beneficial for drilling and reaming as well as for turning operations that require consistent surface quality. Is the insert compatible with standard triangular toolholders? Yes, the triangle 60° form is intended for standard triangular indexable holders commonly used in combined drilling, reaming and light turning setups. What does tolerance class G indicate? Tolerance class G denotes the manufacturing precision of the insert; it supports reliable seating in the tool pocket and helps reduce the need for repeated micro-adjustments. Can this insert be used for finishing passes? With a 0.2 mm corner radius and the MN2 chipbreaker, the insert can deliver fine finishes in appropriate cutting conditions; finishing capability also depends on workpiece material and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trade names and trademarks are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
TCGT16T302-MN2 WNN10 Wendeplatten - Walter Tools
Benefit from the combination of a WNN10 coated carbide grade and the MN2 chipbreaker for consistent chip control and productive machining; the triangle 60° form with a 0.2 mm corner radius supports fine edge definition and repeatable results. Order genuine inserts or consult Metav Werkzeuge for assistance and stock information. TCGT16T302-MN2 WNN10 – Triangle 60° indexable insert, MN2 chipbreaker (Walter Tools) The TCGT16T302-MN2 WNN10 is a triangle 60° indexable insert designed for turning and boring applications, offering a coated cemented-carbide grade for stable cutting performance and predictable tool life. Triangle 60° geometry for versatile turning WNN10 coated carbide for stable cutting MN2 chipbreaker for reliable chip control 0.2 mm corner radius for fine edge definition Productivity through controlled chip flow and repeatable edges The combination of the MN2 chipbreaker and the WNN10 coated carbide grade ensures consistent chip formation, which directly reduces machine downtime and improves cycle stability. As an indexable insert, the triangular 60° geometry offers three usable cutting edges per insert and straightforward indexing, which reduces tool change frequency. The 0.2 mm corner radius supports fine edge definition for tighter dimensional holds while the 7° clearance helps maintain reliable engagement with the workpiece, translating into measurable productivity gains on serial turning and boring operations. Clear guidance on material suitability and process planning The cutting grade is specified as a coated cemented carbide; material suitability should be verified against the product matrix supplied by the manufacturer. The grade provides a balance between wear resistance and edge toughness suitable for general turning tasks where a coated hardmetal grade is indicated. When planning feeds and speeds, consider the insert’s geometry and T3 thickness to match toolholder and clamping stability; if greater detail is required, the product matrix indicates the recommended application range and cutting parameters. Geometry and tolerance details that support predictable results Key geometry and tolerance attributes—triangle 60° form, 0.2 mm corner radius, T3 thickness and tolerance class G—facilitate reproducible installation and interchangeability across compatible toolholders. The modest corner radius aids in achieving good surface finish without sacrificing edge strength for typical turning tasks. The 7° clearance angle reduces rubbing and heat generation at the flank, while the triangle shape optimises accessibility in interrupted cuts and small-diameter bores. Together, these attributes contribute to stable tool behaviour and simplified process setup. Secure genuine Walter Tools TCGT16T302-MN2 inserts through Metav Werkzeuge for reliable supply and technical advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for the intended application Technical data Article number: TCGT16T302-MN2-WNN10-WALTER Designation: TCGT16T302-MN2 Product type: Boring and turning indexable insert Brand: Walter Tools Grade: WNN10 Execution: T Core dimensions Size: 16 Thickness: T3 Clearance angle: 7° Corner radius: 0.2 mm Geometry: Triangle 60° Tolerance class: G Special features Chipbreaker: MN2 Coating: Catalogue dependent Series: Walter cutting-grade series – open series Carbide class: Coated cemented carbide FAQ What materials is this insert suitable for? Material suitability depends on the specific application matrix; the WNN10 coated cemented carbide grade should be checked against the product matrix to confirm compatibility with the intended workpiece material. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes controlled chip formation and evacuation, improving cycle stability and reducing the risk of chip-related interruptions during turning or boring operations. Can this insert be used for finishing and semi-finishing? Yes; the 0.2 mm corner radius and the triangular geometry support fine edge definition for finishing and controlled cuts, while the coated grade offers wear resistance suited to semi-finishing, subject to confirmation via the product matrix. Which tolerance and mounting considerations are relevant? Tolerance class G and T3 thickness indicate precise manufacturing tolerances and a standard thickness for stable clamping; ensure compatible toolholders are selected to preserve the specified tolerance performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TCGT16T304-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, the WSM01 grade for demanding materials and the FM2 chipbreaker for secure chip control; these features support steady production and reduced rework. Order the insert directly via Metav Werkzeuge or consult the technical team for machining recommendations. TCGT16T304-FM2 WSM01 – Triangle indexable insert for stainless steel and superalloys by Walter Tools TCGT16T304-FM2 WSM01 is a triangle indexable insert designed for turning and boring operations in demanding materials such as stainless steels and heat‑resistant superalloys Tiger‑tec Silver coating for long tool life WSM01 grade for stainless and superalloys Triangle 60° with 0.4 mm corner radius FM2 chipbreaker for controlled chip formation High‑performance grade for challenging materials The WSM01 grade in the Tiger‑tec Silver series is a coated carbide formulation optimised for tough applications. It is intended primarily for stainless steel and heat‑resistant superalloys, materials that tend to work‑harden and generate high cutting temperatures. The coating and grade combination deliver improved edge stability and wear resistance, reducing the frequency of tool changes and enabling more consistent cycle times. For production environments where repeatability matters, the insert’s material design supports predictable performance and fewer interrupted runs. Geometry that balances strength and surface quality The triangular 60° form with a 0.4 mm corner radius and a 7° relief angle provides a practical balance between cutting edge strength and the ability to produce fine surface finishes. The insert thickness T3 and tolerance class G contribute to secure clamping and dimensional consistency in the toolholder. These geometric characteristics translate into reliable part tolerances and reduced need for rework: the modest corner radius helps absorb shock on interrupted cuts while still allowing a clean finish on semi‑finish and finishing passes. Controlled chip formation and process security The FM2 chipbreaker is engineered to promote stable chip segmentation when machining ductile, high‑temperature alloys; this reduces the risk of long, entangling chips and helps maintain machine uptime. Stable chip control also supports consistent coolant flow and efficient heat removal from the cutting zone, indirectly improving tool life and part quality. Combined with the coating’s abrasion resistance and the grade’s thermal resilience, this insert enables an efficient machining window that benefits throughput and operator confidence. For tailored machining advice on this Walter Tools insert or recommendations for cutting data and toolholder selection, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and supply options. Technical Data Article number: TCGT16T304-FM2-WSM01-WALTER Designation: TCGT16T304-FM2 WSM01 Product type: Triangle indexable insert / turning and boring insert Manufacturer: Walter Tools Facts Plate size: 16 mm Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: FM2 Plate form: Triangle 60° Material suitability: stainless steel; superalloys/titanium (S / M) Execution: T FAQ What materials is this insert best suited for? The TCGT16T304‑FM2 WSM01 insert is designed for stainless steel and heat‑resistant superalloys; the WSM01 grade and Tiger‑tec Silver coating provide the thermal and wear resistance required for these groups. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on this Walter Tools insert promotes controlled chip segmentation, reducing entangling chips and supporting stable cutting conditions for safer, more efficient production. What benefits does the triangle 60° form offer? The triangle 60° shape provides three usable cutting edges per insert and a geometry that balances rigidity with accessibility for turning and boring tasks, helping to extend usable life and lower tooling costs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected brand names and trademarks are the property of their respective owners. Brand names and trademarks are cited for explanatory purposes only and indicate original, factory‑new products from the manufacturer.
TCGT16T304-FM2 WSM20S Wendeplatten - Walter Tools
Benefit from robust chip control, thermal stability and a compact triangular form that together support reliable machining of demanding materials; order the insert via Metav Werkzeuge or contact the consultants for application advice. TCGT16T304-FM2 WSM20S — indexable insert (triangular 60°, FM2 chipbreaker) by Walter Tools The TCGT16T304-FM2 WSM20S is a triangular turning and boring indexable insert designed for heavy-duty machining of difficult-to-machine alloys and rostfreier Stahl. Tiger·tec Silver coating for heat resistance WSM20S grade for difficult-to-machine alloys FM2 chipbreaker for controlled chip formation Triangular 60° insert, 0.4 mm corner radius Exceptional thermal stability for consistent cutting performance The Tiger·tec Silver coating and the WSM20S grade provide enhanced heat resistance and edge strength, enabling longer tool life in high-temperature cutting. In practice, this means more consistent component tolerances and fewer tool changes during batch production. The coated cemented carbide substrate balances wear resistance with fracture toughness, so the indexable insert maintains a secure cutting edge even when machining materials that tend to work-harden. Such properties reduce process variation and support predictable cycle times in demanding turning and boring operations. Precise chip control that improves productivity The FM2 chipbreaker is engineered to produce short, manageable chips across a range of feeds and depths of cut, lowering the risk of chip entanglement and machine downtime. Controlled chip formation contributes directly to safer, more efficient machining and helps maintain surface finish quality. For production environments focused on throughput, the combination of chip control and thermal resilience reduces the frequency of interruptions and supports stable cutting parameters, which in turn improves overall productivity. Geometry designed for flexibility and repeatable results The triangular 60° shape delivers three usable cutting edges per insert, while the 0.4 mm corner radius supports both light finishing passes and more aggressive profiling depending on the selected insert orientation. The insert thickness T3 and a clearance angle of 7° provide stiffness and clearance balance, permitting reliable engagement in standard toolholders. The compact form factor (16 mm designation) simplifies tool inventory and makes the insert well suited to setups where space is limited but rigidity is required. This geometry aids in achieving repeatable results across multiple setups without complex reprogramming. Application scope and material suitability explained The grade is optimised for machining classes denoted by ISO letters M and S — specifically rostfreier Stahl and heat-resistant superalloys or titanium — materials that generate heat and challenge edge stability. In plain terms: the insert supports secure chip formation and stable cutting edges when working with alloys that are prone to work-hardening or poor heat dissipation. Selection of this insert is particularly recommended where repeatable surface quality and tool life under thermal load are priorities. If uncertainty remains about compatibility with a specific alloy or geometry, application data and cutting parameter guidance are available from the supplier. For heavy-duty turning and heat-challenged alloys, specify the Walter Tools Tiger·tec Silver insert series — contact Metav Werkzeuge for technical guidance and stock information at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCGT16T304-FM2-WSM20S-WALTER SKU: TCGT16T304-FM2-WSM20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM20S Chipbreaker: FM2 Shape: Dreieck 60° Designation: TCGT16T304-FM2 WSM20S Execution: T Numbers / Core technical data Size: 16 Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Tolerance class: G Materials / Application M: rostfreier Stahl S: heat-resistant superalloys and titanium Suitable for heavy-duty machining of difficult-to-machine materials FAQ What materials is this insert best suited for? The TCGT16T304-FM2 WSM20S insert is formulated for machining classes M and S, in particular rostfreier Stahl and heat-resistant superalloys or titanium. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on the TCGT16T304-FM2 promotes short, controlled chips to improve safety, surface finish and productivity in continuous turning operations. How many cutting edges are available per insert? The triangular 60° design of the TCGT16T304-FM2 provides three usable cutting edges, enabling economical index changes during production. Can this insert be used for both roughing and finishing? Yes; the 0.4 mm corner radius and the grade characteristics allow a flexible balance between material removal rates and surface quality depending on insert orientation and cutting parameters. Is the Tiger·tec Silver coating suitable for high-speed applications? Tiger·tec Silver offers improved heat resistance and edge stability, making the insert suitable for elevated cutting temperatures encountered in high-speed and heavy-duty turning tasks. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT16T304-FN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of a robust WN10 uncoated cemented carbide grade, a 0.4 mm corner radius and the FN2 chipbreaker for consistent chip control and efficient turning performance; order through Metav Werkzeuge or request tailored machining advice. TCGT16T304-FN2 WN10 — Turning and boring indexable insert, triangular 60°, FN2 chipbreaker (Walter Tools) A TCGT16T304-FN2 WN10 triangular insert designed for productive turning and boring operations, offering stable chip formation and a precise cutting edge for consistent component quality. Uncoated cemented carbide WN10 grade Triangular 60° insert, 0.4 mm corner radius 7° clearance angle for stable cutting FN2 chipbreaker for controlled chip flow Consistent chip control for uninterrupted production The combination of the FN2 chipbreaker and the WN10 uncoated cemented carbide enables predictable chip formation under a range of cutting conditions. Controlled chips reduce downtime from chip entanglement and make automated turning processes more reliable. The FN2 geometry is designed to direct and fracture chips effectively, which supports longer uninterrupted cycles and contributes directly to higher overall productivity on the shop floor. Geometry tuned for repeatable surface quality A triangular 60° form with a 0.4 mm corner radius and a 7° clearance provides a robust geometry that balances edge strength with surface finish. The modest corner radius helps absorb intermittent load peaks while still allowing good dimensional control, making the insert suitable for finishing and medium-duty turning tasks. The insert thickness designation T3 and the 16 mm seat size ensure secure clamping and repeatable tool positioning for consistent results across batches. Material and grade suited for broad machining tasks The insert is supplied in the WN10 grade — an uncoated cemented carbide intended for general machining where a reliable, economical cutting grade is required. This grade performs well in standard steels and common ferrous materials (verify suitability against the product matrix for specific alloys). The open series design supports flexible application choices and straightforward grade selection when matching cutting parameters to component requirements, helping to streamline tool management and reduce inventory complexity. Practical advantages for the workshop Tolerance class G and the compact triangular form enable quick index changes and stable cutting even in interrupted cuts. The insert’s design reduces the need for frequent edge changes and supports predictable tool life, which lowers process risk and simplifies production planning. Where process stability and efficient chip evacuation are priorities, this insert offers a pragmatic balance between economy and performance, compatible with automated and manual turning setups. Contact Metav Werkzeuge for application-specific recommendations or to source Walter Tools WN10 inserts for enhanced shop productivity and reliable chip control Technical data Article number: TCGT16T304-FN2-WN10-WALTER Description: TCGT16T304-FN2 WN10 turning/boring indexable insert Brand: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Insert form angle: 60° Insert size: 16 Thickness: T3 Tolerance class: G Special features Uncoated cemented carbide (WN10) FN2 chipbreaker Triangular 60° plate form Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What materials is this insert suitable for? The WN10 grade insert from Walter Tools is an uncoated cemented carbide designed for a broad range of common machining tasks; consult the product matrix to confirm suitability for specific alloys and hardness ranges. How does the FN2 chipbreaker affect machining performance? The FN2 chipbreaker on the TCGT16T304-FN2 WN10 promotes controlled chip formation, improving evacuation and reducing the risk of chip-related interruptions during turning and boring operations. Can the 0.4 mm corner radius be used for finishing? Yes, the 0.4 mm corner radius provides a balance between edge strength and surface finish, making the insert appropriate for light to medium finishing passes where robustness is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TCGT16T304-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, precise chip control and consistent indexing to boost productivity on batch and serial turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT16T304-FN2 WNN10 indexable insert for drilling/boring and turning — triangular 60°, 0.4 mm radius — Walter Tools A TCGT16T304-FN2 WNN10 indexable insert designed for versatile turning and plunge‑drilling applications in machining centres and turret lathes, offering stable edge life and controlled chip formation for productive metalcutting. Triangular 60° geometry for robust indexing 0.4 mm corner radius for fine surface quality 7° clearance angle for reliable chip evacuation Coated cemented carbide grade WNN10 for good wear resistance Consistent edge life for predictable cycle times The triangular insert geometry combined with the WNN10 coated cemented carbide creates a balance between toughness and wear resistance, delivering consistent edge life across repeating production runs. This predictability reduces unexpected tool changes and helps maintain planned cycle times. The insert’s construction supports stable cutting under varying feed and speed conditions, which translates to fewer interruptions and improved overall equipment effectiveness. For a clear match to workpiece materials, the specific material suitability should be checked against the product matrix. Controlled chip formation improves surface finish Equipped with the FN2 chipbreaker and a 0.4 mm corner radius, the insert promotes short, controlled chips and a smooth transition between passes. The chipformer is optimised to break swarf reliably in standard turning and light boring operations, lowering the risk of chip entanglement and improving operator safety. The moderate corner radius aids in achieving a high-quality surface without compromising tool strength, enabling finer finishes on semi‑finishing passes while maintaining tool life. Geometry and clearance designed for secure clamping and access The triangular 60° shape with a 7° clearance angle ensures secure seating in common toolholders and offers good access to interrupted cuts or complex contours. The thickness T3 and size 16 specification provide a stable platform against vibration, supporting repeatable dimensional accuracy. This geometry is particularly advantageous when frequent index changes are required, since each corner contributes to overall tool economy and quick re‑use without compromise to stability. Practical selection and operational benefits The insert’s design prioritises productivity: multiple usable edges, balanced wear resistance and a proven chip control system reduce process variability and support higher throughput. Although the grade is WNN10 (coated carbide), the exact suitability for specific alloys should be verified in the technical matrix; selecting the correct machining parameters and coolant strategy will further extend life and surface quality. The combination of features makes this insert a pragmatic choice for manufacturers seeking efficient, reliable tools for mixed turning and drilling tasks. For tailored technical advice on Walter Tools indexable inserts and to confirm suitability for specific materials, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — expert support is available to optimise tooling choices. Technical data Article number: TCGT16T304-FN2-WNN10-WALTER SKU: TCGT16T304-FN2-WNN10-WALTER Name: TCGT16T304-FN2 WNN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Tolerance class: G Numbers / Facts Insert size: 16 mm Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Triangle angle: 60° Special features / Versions Chipbreaker: FN2 Geometry: Dreieck 60° Designation without grade: TCGT16T304-FN2 Execution: T Material/grade: coated cemented carbide (catalogue dependent) FAQ What applications suit this indexable insert best? The TCGT16T304-FN2 WNN10 insert is intended for combined turning and light drilling/boring tasks where controlled chip breakage and consistent edge life are required; check the product matrix for exact material matches. How many cutting edges are available per insert? Each triangular insert provides three usable cutting corners; the geometry and coating support multiple re‑uses before regrinding or disposal. Is the WNN10 grade suitable for stainless or hardened steels? WNN10 is a coated carbide grade; material suitability varies — the TCGT16T304-FN2 WNN10 should be matched to the workpiece via the product matrix to confirm optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT16T304-MN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of stable seating, precise chip control and a versatile uncoated carbide grade for consistent productivity in drilling, boring and light turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. TCGT16T304-MN2 WN10 – triangle 60° indexable insert, MN2 chipbreaker by Walter Tools The TCGT16T304-MN2 WN10 is a triangular 60° indexable insert designed for drilling, boring and light turning operations, supplied in an uncoated cemented carbide grade (WN10) for versatile machining across a wide range of applications Triangle 60° form for secure seating MN2 chipbreaker for reliable chip control Uncoated carbide WN10 for broad material range Secure seating for repeatable accuracy and tool life The triangular 60° geometry provides a compact 60° seating that enhances clamping stability and contributes to repeatable positioning at the toolholder interface. A defined 0.4 mm corner radius gives controlled edge strength without compromising form, so the cutting edge resists chipping under intermittent loads. This combination reduces the need for frequent index changes and supports a steady production rhythm, delivering measurable improvements in process reliability. Consistent chip formation and manageable swarf The integrated MN2 chipbreaker has been developed to shape chips predictably during interrupted and continuous cuts. Controlled chip formation reduces the risk of chip entanglement in drilling or boring operations and eases disposal in turning cycles, which in turn lowers the likelihood of surface damage and shortens secondary cleaning time. Improved chip control contributes directly to operational uptime and consistent surface quality. Material grade and application flexibility The insert is supplied in the uncoated cemented carbide grade WN10, an open-series grade intended for general machining tasks. As an uncoated carbide solution, it offers good edge stability and is especially suitable where coating sensitivity or specific workpiece materials require a bare substrate. Check the product matrix for precise suitability; when matched correctly, the grade supports efficient machining across a range of common alloys and workshop tasks. Geometry and handling that simplify setup With a plate size of 16 and a plate thickness denoted as T3, the insert fits common toolholder systems for drilling and turning operations, while the 7° relief angle helps to reduce rubbing on the flank and minimise cutting forces. These geometric choices make the insert straightforward to mount and orient, shortening setup time and enabling consistent repeatability across tool changes. Clear geometry also assists in predicting cutting behaviour for process planning. For reliable, productivity-focused machining with Walter Tools inserts, contact Metav Werkzeuge for tailored selection advice and availability — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: TCGT16T304-MN2-WN10-WALTER SKU: TCGT16T304-MN2-WN10-WALTER Product type: Drilling/boring and turning indexable insert Brand: Walter Tools Facts Plate size: 16 Corner radius: 0.4 mm Relief angle: 7° Thickness: T3 Geometry: Triangle 60° Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated cemented carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What machining tasks is this insert suited for? The insert is designed for drilling, boring and light turning operations; the TCGT16T304-MN2 WN10 combines a triangle 60° form with the MN2 chipbreaker to handle a variety of workshop tasks. Is this grade coated or uncoated? The WN10 grade of the TCGT16T304-MN2 is an uncoated cemented carbide grade, offering edge stability where coatings are not required. How does the MN2 chipbreaker affect chip control? The MN2 chipbreaker shapes chips reliably to reduce entanglement and improve evacuation during drilling and turning, supporting cleaner processes and consistent surface finish. What does the 0.4 mm corner radius mean for performance? A 0.4 mm corner radius balances edge strength and form precision, reducing the risk of edge chipping while maintaining the required contour for accurate cuts. Which tolerance class is specified for this insert? The insert is supplied in tolerance class G, ensuring conformity with common toolholder interfaces and predictable seating. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
TCGT16T304-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Combining a coated carbide WNN10 grade with a defined MN2 chipbreaker yields a reliable insert that balances wear resistance and chip control for productive drilling, boring and light turning. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TCGT16T304-MN2 WNN10 – Drill/boring indexable insert and turning indexable insert, 60° triangle, coated carbide — Walter Tools TCGT16T304-MN2 WNN10 is an indexable insert designed for drilling, boring and finishing operations where predictable chip formation and a stable cutting edge are required Coated carbide grade WNN10 MN2 chipbreaker for stable chips 60° triangular insert geometry 0.4 mm corner radius, 7° clearance Increased productivity through a durable cutting edge The combination of WNN10 (coated carbide) and the MN2 chipbreaker is engineered to extend tool life while maintaining process stability. The coating improves wear resistance under cyclic loads, which reduces the frequency of index changes and supports consistent cycle times. As a result, machining operations can run longer between interruption, and setup times are reduced. This translates into measurable gains in throughput for repetitive production tasks. Predictable chip control that protects the workpiece Reliable chip formation is essential for safe drilling and boring; the MN2 chipbreaker promotes short, controllable chips that evacuate cleanly from the hole and reduce re-cutting. With the insert’s 60° triangular geometry and a 0.4 mm corner radius, the cutting edges deliver consistent engagement and a predictable cutting footprint. The outcome is improved surface quality and fewer interruptions due to chip-related issues, which supports higher first-pass yields on production runs. Design details that lower machining risk A 7° clearance angle and the insert’s T3 thickness contribute to a balanced edge strength and clearance combination. The modest clearance reduces rubbing while preserving a robust cutting edge capable of withstanding axial and radial loads typical in drilling and light turning. The triangular shape provides three usable cutting corners, improving cost-efficiency per edge and simplifying index strategies for batch work. Application guidance and material considerations The insert is specified in the Walter cutting material series - open and the WNN10 grade is a coated cemented carbide variant; verify the material suitability against the manufacturer's product matrix for the target workpiece material. The G tolerance class indicates manufacturing precision of the insert seating and can enhance repeatability in toolholders. For best results, pair the insert with holders rated for triangular 60° geometry and follow recommended cutting parameters for feed and speed based on the workpiece material. For application advice on Walter Tools TCGT16T304-MN2 WNN10 inserts or to confirm availability with Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCGT16T304-MN2-WNN10-WALTER Product type: Drill/boring indexable insert / Turning indexable insert Brand: Walter Tools ISO designation: TCGT16T304-MN2 WNN10 Series: Walter cutting material series - open Facts Insert size: 16 Plate thickness: T3 Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Tolerance class: G Special features Grade: WNN10 (coated carbide) Chipbreaker: MN2 Execution: T Designation without grade: TCGT16T304-MN2 Material: Catalogue-dependent FAQ What operations is this insert intended for? The TCGT16T304-MN2 WNN10 insert is designed for drilling, boring and light turning operations where a stable cutting edge and effective chip control are required. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker promotes short, controlled chips that aid evacuation from holes and reduce re-cutting, enhancing surface finish and process reliability with the Walter Tools insert. Which workpiece materials suit the WNN10 grade? WNN10 is a coated cemented carbide grade; material suitability should be checked against the Walter Tools product matrix to match grade properties with the specific workpiece material. How many usable cutting edges does the insert provide? The triangular 60° geometry offers three cutting corners per insert, improving per-edge economy and simplifying index strategies for batch production. What does the tolerance class G mean for machine setup? Tolerance class G denotes the manufacturing precision of the insert seating; tighter tolerances support repeatable positioning in the toolholder and contribute to consistent machining results. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation and identification; no affiliation or endorsement by the trademark owners is implied. The offered item is an original, factory-new product of the respective manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCGT16T308-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective coated carbide, reliable chip control and a geometry tuned for demanding materials to keep machining stable and productive; order the insert through Metav Werkzeuge or request tailored cutting-parameter advice from our consultants. TCGT16T308-FM2 WSM01 indexable insert — Triangle 60°, Tiger‑tec Silver grade, Walter Tools The TCGT16T308-FM2 WSM01 indexable cutting insert for heavy-duty and high‑temperature alloys, designed for grooving, boring and turning where secure chip formation and edge stability are required Tiger‑tec Silver series grade WSM01 Triangle 60° insert, 0.8 mm corner radius 7° clearance angle for stable cutting Suitable for rostfreier Stahl and high‑temperature alloys Robust geometry for challenging materials The insert combines a triangle 60° form with a 0.8 mm corner radius, delivering predictable contact conditions at the cutting edge. The geometry reduces chatter risk and spreads cutting forces across a larger area, which helps maintain edge stability during interrupted or heavy cuts. The 7° clearance angle supports consistent chip flow and lowers rubbing on the flank face, so tool life is extended and process reliability improves. These design choices make the insert especially effective when machining tough-to-cut materials such as rostfreier Stahl and nickel‑based superalloys. Coated carbide grade tuned to thermal and mechanical loads Belonging to the Tiger‑tec Silver family, the WSM01 grade is a coated carbide formulation optimised for applications that generate elevated temperatures and adhesive tendencies. The coating and substrate combination promotes stable wear behaviour and enhanced resistance to built-up edge; this means longer productive windows between index changes and fewer unplanned interventions. For operations where temperature control at the cutting edge is critical, the grade supports secure chip formation and preserves surface integrity on the workpiece. Chip control and process security that increases throughput The FM2 chipbreaker was engineered to manage continuous and segmented chips common with high‑strength alloys. Controlled chip formation reduces cycle interruptions and protects workpiece surfaces, leading to fewer secondary operations. Combined with the insert’s tolerance class G and T3 plate thickness, the system delivers predictable repeatability in automated and manual turning centres. The outcome is a measurable uplift in process security and a reduction in scrap rates during production runs. Practical handling and application guidance for the workshop The insert’s 16 mm size and triangular shape allow three index positions, providing an economical approach to edge usage. The coated carbide base and WSM01 chemistry suit both rostfreier Stahl applications (ISO group M) and high‑temperature alloys including titanium and nickel‑based materials (ISO group S), enabling one insert to cover a wide material range. For best results, match cutting speeds and feeds to material—higher cutting speeds with adequate coolant for rostfreier Stahl and moderated feeds for superalloys—while monitoring tool wear to determine optimal index intervals. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools inserts and to discuss recommended cutting parameters; Metav Werkzeuge can advise on the best insert selection and provide swift technical support (eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930) Technical data Article number (SKU): TCGT16T308-FM2-WSM01-WALTER Designation: TCGT16T308-FM2 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Manufacturer: Walter Tools Core specifications Size: 16 mm Plate form: Triangle 60° Thickness: T3 Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: G Applications & features Chipbreaker: FM2 Coated carbide grade Suitable for rostfreier Stahl (ISO group M) Suitable for superalloys and titanium (ISO group S) Three usable corners per indexable insert FAQ What materials is this insert best suited for? The TCGT16T308-FM2 WSM01 by Walter Tools is specified for rostfreier Stahl (ISO group M) and high‑temperature alloys such as titanium and nickel‑based superalloys (ISO group S), offering secure chip control and thermal resistance. How does the FM2 chipbreaker affect machining performance? The FM2 chipbreaker promotes compact, controllable chips for continuous and segmented cutting, reducing cycle interruptions and protecting the workpiece finish when using the Walter Tools insert. How many index positions are available per insert? The triangular 60° shape provides three index positions, allowing economical usage of the cutting edges before replacement is required for the Walter Tools insert. Which series and grade does this insert belong to and what does that mean? This insert is from the Tiger‑tec Silver series in grade WSM01, a coated carbide offering improved wear resistance and edge stability for demanding materials and thermally aggressive machining conditions. What geometry features contribute to longer tool life? The combination of a 0.8 mm corner radius, 7° clearance angle and the coated substrate reduces edge stress and flank rubbing, resulting in extended tool life and consistent surface quality when using this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT16T308-FM2 WSM20S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a robust FM2 chipbreaker and a stiff triangular geometry for secure machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for process‑specific recommendations. TCGT16T308-FM2 WSM20S — Turning/boring indexable insert, Tiger‑tec Silver, for stainless steel and superalloys (Walter Tools) The TCGT16T308-FM2 WSM20S is a 60° triangular indexable insert engineered for productive turning and boring of stainless steel and heat‑resistant alloys, offering high edge stability and consistent chip control Tiger‑tec Silver coating for heat resistance Suitable for stainless steel and superalloys Triangular 60° form with 0.8 mm radius FM2 chipbreaker for stable chip control Consistent performance for challenging materials The combination of the WSM20S grade and Tiger‑tec Silver coating provides enhanced thermal resistance and wear control during heavy cutting of ductile or work‑hardening materials. This coated cutting grade is optimised for the machining demands of stainless steel and high‑temperature alloys (material groups M and S), where heat generation and built‑up edge frequently limit productivity. The benefit for production is predictable tool behaviour and fewer unplanned tool changes, which supports higher machine utilisation and repeatable component quality. Geometry that supports edge strength and repeatability A 60° triangular plate form with a 0.8 mm corner radius and 7° relief delivers a balanced combination of strength and versatile cutting capability. The compact plate thickness T3 and tolerance class G ensure reliable clamping and repeatable seating in indexable toolholders, reducing vibration and improving surface finish on the workpiece. For process engineers this geometry means confident feed and depth‑of‑cut choices with enhanced edge support under interrupted or mixed cutting conditions. Reliable chip control for smoother production The integrated FM2 chipbreaker is designed to produce predictable chip forms across a range of feeds and cutting depths, improving swarf evacuation in both turning and light boring operations. Stable chip formation reduces the risk of tool or workpiece damage and minimises secondary operations such as manual chip clearing. The direct consequence is shorter cycle times and a more consistent component surface, especially when machining materials prone to long, stringy chips. Extended tool life and process economy Optimised coating technology and a robust grade selection reduce flank wear and prolong effective tool life, which lowers tooling cost per component in series production. Fewer indexings and longer intervals between insert changes contribute to reduced downtime and lower total cost of ownership. The design supports both finish and light roughing passes depending on setup, helping maintain a high output quality while keeping process costs under control. Practical choice and seamless integration This insert adheres to standard ISO designation practices, making it straightforward to integrate into existing toolholder inventories for turning and boring. The triangular format adds multiple indexing positions for efficient use of the insert corners. For specification, reference the ISO code TCGT16T308‑FM2 and the grade WSM20S when planning tooling sets to ensure material compatibility and achieve reliable machining outcomes. For process‑critical turning of stainless steel and superalloys, opt for the Walter Tools TCGT16T308‑FM2 WSM20S insert; contact Metav Werkzeuge for tailored recommendations and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TCGT16T308-FM2-WSM20S-WALTER Designation: TCGT16T308-FM2 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Core specifications Size: 16 Plate form: Triangular 60° Corner radius: 0.8 mm Relief/clearance: 7° Thickness: T3 Tolerance class: G Materials & features Coating/series: Tiger‑tec Silver Grade: WSM20S Chipbreaker: FM2 Material suitability: stainless steel (M), superalloys/titanium (S) Sort description: Coated cemented carbide for hard‑to‑machine materials FAQ What materials is this insert suited for? The TCGT16T308‑FM2 WSM20S insert is specified for stainless steel (material group M) and heat‑resistant superalloys or titanium (material group S), providing enhanced thermal and edge stability. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on the Walter Tools insert promotes controlled chip formation and evacuation, which improves surface finish and reduces interruptions from long or tangled chips. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength and surface quality, offering better load distribution at the cutting edge and improved resistance to chipping during tougher cuts. Is this insert compatible with standard toolholders? The ISO designation TCGT16T308‑FM2 aligns with common triangular insert holders; ensure the holder accepts a 60° triangular insert with the specified thickness T3 and tolerance class G. Which performance benefits can be expected in production? Using the WSM20S grade with Tiger‑tec Silver coating typically leads to longer tool life, higher process reliability and fewer tool changes, translating into improved machine uptime and lower unit costs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; no affiliation between Metav Werkzeuge and the named brands is implied. The offered article is an original, factory‑new product of the manufacturer.
TCGT16T308-FN2 WN10 T Wendeplatten - Walter Tools
TCGT16T308-FN2 WN10 Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Walter Tools TCGT16T308-FN2 WN10 ist eine leistungsorientierte Wendeplatte für präzise Zerspanungsvorgänge an Dreh- und Aufbohrwerkzeugen und wurde für industrielle Fertigungsprozesse entwickelt. Dreieck 60° kompakte Plattengröße 16 Feiner Eckenradius 0,8 mm für Maßhaltigkeit Freiwinkel 7° sorgt für sichere Spanbildung Spanbrecher FN2 ermöglicht kontrollierten Spanfluss Unbeschichtetes Hartmetall Sorte WN10 für Standzeit Produktivität sichern durch präzise Spanformung Die Wendeplatte TCGT16T308-FN2 WN10 bietet durch den eingebauten Spanbrecher FN2 eine konstante und kontrollierte Spanbildung, wodurch sich Werkzeugstandzeiten und Prozessstabilität verbessern. Für Fertigungsbetriebe bedeutet das weniger Stillstand und gleichbleibende Oberflächenqualität. Die Kombination aus Dreieck 60° und Eckenradius 0,8 mm reduziert Nacharbeitbedarf und unterstützt reproduzierbare Bearbeitungsergebnisse. Materialflexibilität und Werkstoffeignung verantwortungsvoll nutzen Die Schneidstoffsorte WN10 ist ein unbeschichtetes Hartmetall, dessen Einsatzspektrum werkstoffabhängig ist; eine konkrete Eignungsprüfung anhand der Produktmatrix wird empfohlen. Durch die Katalogabhängigkeit des Materials empfiehlt sich vor der Anwendung die Abstimmung mit der Prozessplanung, damit Schnittwerte und Kühlung optimal auf die Werkstückwerkstoffe abgestimmt werden können. Für wen diese Platte entwickelt wurde und typische Anwendungen Maschinenbetreiber in Serienfertigung, Lohnfertiger und Zerspanungsfachbetriebe profitieren von der TCGT16T308-FN2 WN10 bei Dreh- und Aufbohranwendungen, bei denen Prozesssicherheit und Wiederholgenauigkeit gefragt sind. Die Platte eignet sich besonders für produktive Bearbeitungsstrategien auf CNC-Drehzentren und reduziert durch einfache Indexierung Rüstzeiten und Maschinenstillstand. Handhabung, Geometrie und wirtschaftlicher Nutzen Die Plattengeometrie mit Dreieck 60°, Plattendicke T3 und einem Freiwinkel 7° erleichtert das Positionieren in Plattensitz und sorgt für stabile Kontaktbedingungen. Die kompakte Größe 16 erlaubt flexible Einsatzkonzepte und schnelle Werkzeugwechsel. Dadurch sinken Standzeiten und die Wirtschaftlichkeit der Zerspanung steigt, weil weniger Ausschuss und geringerer Nacharbeitsaufwand anfallen. Für maximale Prozesssicherheit empfiehlt Metav Werkzeuge die TCGT16T308-FN2 WN10; Anfragen bitte an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Leistungsmerkmale Artikelnummer: TCGT16T308-FN2-WN10-WALTER Marke: Walter Tools Baureihe: Walter Schneidstoffsorte - Serie offen Fakten Plattengröße: 16 Plattendicke: T3 Freiwinkel: 7° Eckenradius: 0,8 mm Plattenform: Dreieck 60° Toleranzklasse: G Besonderheiten Spanbrecher: FN2 (kontrollierter Spanfluss) Sorte: WN10 (unbeschichtetes Hartmetall) Material: Katalogabhängig Ausführung: T Bezeichnung: TCGT16T308-FN2 FAQ Was bedeutet die Bezeichnung TCGT16T308-FN2 WN10? Die Bezeichnung beschreibt die Geometrie und Sortenzuordnung: TCGT16T308 steht für Form und Abmessung, FN2 kennzeichnet den Spanbrecher und WN10 die Schneidstoffsorte. Walter Tools liefert so transparente Daten für die Prozessauswahl. Für welche Bearbeitungen ist die Platte geeignet? Die TCGT16T308-FN2 WN10 ist für Dreh- und Aufbohrvorgänge konzipiert; die exakte Werkstoffeignung sollte anhand der Produktmatrix geprüft werden, um optimale Schnittdaten zu ermitteln. Welche Vorteile bietet der Eckenradius 0,8 mm? Ein Eckenradius von 0,8 mm verbessert die Maßhaltigkeit und reduziert Rissbildung an der Schneidkante, was zu stabileren Bearbeitungsbedingungen und weniger Nacharbeit führt. Ist die Sorte WN10 beschichtet? Die Schneidstoffsorte WN10 wird als unbeschichtetes Hartmetall geführt; in vielen Anwendungen ist das die wirtschaftliche Wahl für stabile Spanbildung. Wie wirkt sich der Freiwinkel 7° auf den Prozess aus? Ein Freiwinkel von 7° beeinflusst den Spanabtrag positiv, reduziert Schnittkräfte und fördert eine gleichmäßige Spanbildung, was die Werkzeugstandzeit unterstützt. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT16T308-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, reliable chip control and a robust coated carbide grade for consistent turning and boring performance; order the insert directly via Metav Werkzeuge or consult the sales team for application advice. TCGT16T308-FN2 WNN10 turning and boring indexable insert by Walter Tools — triangular 60° form with FN2 chipbreaker The TCGT16T308-FN2 WNN10 is an indexable insert designed for turning and bore enlargement tasks, offering controlled chip formation and consistent cutting performance in a wide range of operations Triangle 60° geometry for stable support Chipbreaker FN2 for controlled chip formation Corner radius 0.8 mm for reproducible edge strength Coated carbide grade WNN10 for productive machining Precision geometry for reliable productivity The insert combines a triangle 60° form with a corner radius of 0.8 mm and a clearance angle of 7°, providing a stable seating and repeatable cutting edge engagement. These geometry choices translate into predictable cutting forces and improved process stability on the toolholder. The FN2 chipbreaker is engineered to deliver consistent chip control across interrupted and continuous cuts, supporting efficient material evacuation and reducing the risk of built-up edge. The designation TCGT16T308-FN2 WNN10 denotes the specific geometry and chip control concept incorporated in this grade. Coated carbide grade that balances wear resistance and economy The WNN10 grade is a coated carbide formulation from Walter Tools intended to offer a compromise between wear resistance and cost-effectiveness in general machining. The coating increases abrasive resistance and helps maintain a sharp cutting edge over extended tool life, while the substrate hardness provides toughness against chipping. Material suitability is determined by the product matrix; therefore, workpiece compatibility should be verified against the specific grade data. Where variability exists in catalogue listings, refer to the technical matrix for recommended cutting parameters and expected performance envelopes. Practical dimensions and repeatable handling for workshop use With a size of 16 mm and a nominal thickness T3, the insert fits common triangular pockets and enables quick replacement for high machine uptime. The compact form and standardised ISO-style designation simplify stock management and tool presetting. The geometry and chipbreaker support reproducible surface quality and edge life, which contributes to lower process costs and fewer unplanned tool changes. For operations that prioritise predictable performance, the combination of FN2 chip control and a controlled corner radius yields measurable improvements in cycle consistency. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and assistance with selection or quotation — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: TCGT16T308-FN2-WNN10-WALTER Article designation: TCGT16T308-FN2 WNN10 Product type: Boring and turning indexable insert Manufacturer: Walter Tools Facts Size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Tolerance class: G Special features Chipbreaker: FN2 Grade: WNN10 (coated carbide) Execution: T Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig FAQ What machining tasks suit this insert best? The TCGT16T308-FN2 WNN10 insert is intended for turning and bore-enlargement operations where controlled chip formation and repeatable edge life are required. What does the WNN10 grade indicate? WNN10 designates a Walter Tools coated carbide grade engineered for balanced wear resistance and toughness in a broad range of general machining applications. How does the FN2 chipbreaker affect cutting behaviour? The FN2 chipbreaker promotes consistent chip control and reliable evacuation, reducing risk of chip entanglement and supporting stable cutting forces during interrupted and continuous cuts. Which dimension and geometry details are standard for this insert? The insert has a triangle 60° form, size 16 mm, thickness T3, corner radius 0.8 mm, and a clearance angle of 7°. Is the TCGT16T308-FN2 WNN10 suitable for all materials? Material suitability depends on the specific product matrix; the grade is coated carbide, but compatibility should be checked against the manufacturer's material recommendations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands named. The offered item is original, factory-new goods of the manufacturer Walter Tools.
TCGT16T308-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the MK4 chipbreaker geometry for reliable machining of cast iron; the insert’s 7° clearance and 0.8 mm corner radius deliver steady edge life and predictable surface finish. Order the insert through Metav Werkzeuge or ask the Metav consultants for application-specific recommendations. TCGT16T308-MK4 WKK20S triangular insert for cast iron by Walter Tools — Tiger‑tec Silver, MK4 chipbreaker TCGT16T308-MK4 WKK20S is a triangular indexable insert designed for productive drilling, boring and turning of cast iron components, combining a coated‑carbide grade with a chip‑forming geometry for short, manageable chips. Tiger‑tec Silver coated carbide Optimised for cast iron (ISO K) MK4 chipbreaker for short chips 7° clearance and 0.8 mm corner radius Greater productivity when machining cast iron The insert is built around the WKK20S grade from the Tiger‑tec Silver family, a coated carbide formulation tuned for the abrasive wear and short, breaking chips typical of cast iron (ISO K). The result is a measurable increase in process stability and repeatable component quality: higher cutting speeds are achievable compared with uncoated grades, while tool life is extended under standard production conditions. The triangular 60° geometry permits three effective cutting edges per index, improving overall economy per insert and reducing tool change intervals. Controlled chip behaviour and consistent surface finish Thanks to the MK4 chipbreaker and positive geometry, the insert produces short, controllable chips that reduce downtime and minimise the risk of surface damage or entanglement in rotating operations. The specified 7° clearance angle combined with a 0.8 mm corner radius stabilises the cutting edge, giving a robust contact zone at interrupted cuts and maintaining a reproducible surface finish. For manufacturers aiming at predictable cycle times and reduced rework, this geometry delivers practical benefits in daily production. Easy specification and integration into existing tool systems The triangular insert with an inscribed circle of 16 mm and thickness T3 fits many common toolholders and drilling/turning applications; its designation TCGT16T308‑MK4 WKK20S follows standard indexing nomenclature for straightforward ordering and inventory control. The coated carbide construction means fewer unexpected tool changes, while the tolerance class G assures consistent dimensions for automated and manual toolset-ups. If uncertain about holder compatibility or cutting parameters, Metav Werkzeuge can supply cutting data and adaptation advice to align the insert with current machining centres. Reliable brand performance and process confidence Manufactured by a recognised name in precision tooling, this insert benefits from tested coating technology and proven substrate choices that favour stable chip formation and predictable edge wear. The combination of grade, chipbreaker and geometry supports high repeatability in serial production and gives confidence where component integrity and finish are critical. For operations seeking both technical robustness and cost efficiency, this solution balances wear resistance and productivity. For application advice or parameter sheets for Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge — practical guidance and ordering support are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: TCGT16T308-MK4-WKK20S-WALTER Designation: TCGT16T308-MK4 WKK20S Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Facts Free clearance angle: 7° Corner radius: 0.8 mm Inscribed circle: 16 mm Plate thickness: T3 Tolerance class: G Special features Chipbreaker: MK4 Plate form: Triangle 60° Coating / substrate: coated carbide Material application: cast iron (ISO K) Execution: T Optimised for abrasive wear and short, breaking chips FAQ What materials is the insert suitable for? The TCGT16T308‑MK4 WKK20S from Walter Tools is optimised for cast iron (ISO K) and designed to cope with the abrasive wear characteristics of these materials. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker produces short, controlled chips that reduce entanglement and improve process reliability when using the Walter Tools insert in drilling and turning operations. What does the WKK20S grade deliver in practice? WKK20S (Tiger‑tec Silver) is a coated carbide grade that offers improved wear resistance and consistent tool life when machining cast iron, supporting higher cutting speeds and repeatable results. Is the geometry compatible with standard toolholders? The triangular 60° form with a 16 mm inscribed circle and T3 thickness conforms to common indexing standards, allowing straightforward integration into compatible holders for the Walter Tools insert. How should the 0.8 mm corner radius be used in planning? A 0.8 mm corner radius gives a compromise between edge strength and surface finish; it is suitable for general finishing and semi‑finishing cuts where a robust edge is required. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT16T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver heat resistance, a WSM20S coated-carbide grade and a precise 60° geometry to improve process stability when machining demanding alloys. Purchase via Metav Werkzeuge for fast supply or consult their specialists for application recommendations. TCGT16T308-MM4 WSM20S indexable insert — triangular 60°, Tiger·tec Silver coating — Walter Tools The TCGT16T308-MM4 WSM20S is a triangular indexable insert designed for reliable machining of stainless steels and heat‑resistant superalloys, offering a compact 60° cutting geometry for versatile turning and drilling-related operations. Tiger·tec Silver coating for heat resistance WSM20S grade for stainless and superalloys 60° triangular insert with 0.8 mm radius 7° relief angle for stable cutting edge Consistent performance for difficult-to-machine materials The coated‑carbide WSM20S grade, part of the Tiger·tec Silver series, is formulated to deliver stable chip formation and extended edge life when working with stainless steels (ISO group M) and heat‑resistant alloys or titanium (ISO group S). The 60° triangular shape combined with a 0.8 mm corner radius provides a balance between strength and accessibility; larger radii increase cutting edge robustness, while the triangular form allows three indexable corners per insert. These features reduce tool change frequency and enhance process reliability in continuous production environments. Clear advantages in machining strategy and chip control The insert’s MM4 chipbreaker is engineered to manage chips effectively under varying cut depths and feed rates, reducing the risk of built‑up edge and improving surface finish. For less experienced users: a chipbreaker shapes and breaks the chips produced during cutting, directing them away from the workpiece and toolholder to avoid interference. The 7° relief angle lowers friction behind the cutting edge and helps maintain stable cutting forces, which translates into predictable tool behaviour and consistent cycle times on the shopfloor. Compatibility, handling and application guidance With a nominal size of 16 mm and thickness T3, the insert fits industry‑standard toolholders configured for triangular TCGT inserts; the tolerance class G ensures repeatable seating accuracy. Selection of the WSM20S grade is particularly worthwhile where thermal resistance and edge stability are priorities—typically in semi‑finishing and finishing passes on corrosion‑resistant steels and nickel‑based alloys. For procurement and inventory planning, the insert’s geometry and grade allow flexible deployment across toolsets, supporting both productivity improvements and stock rationalisation. For tailored application advice and reliable supply of Walter Tools inserts contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for prompt recommendations and delivery. Technical data Article number: TCGT16T308-MM4-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT16T308-MM4 WSM20S Walter Tools Manufacturer: Walter Tools Product type: indexable insert for turning/drilling applications Series: Tiger·tec Silver Grade: WSM20S Numbers / Core technical data Insert size: 16 mm Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Tolerance class: G Plate form: Triangle 60° Designs / Special features Coated carbide grade WSM20S Tiger·tec Silver coating technology Chipbreaker type MM4 Material suitability: stainless steels (M) and superalloys/titanium (S) Execution: T FAQ Which materials is this insert suitable for? The TCGT16T308-MM4 WSM20S is suited for stainless steels and heat‑resistant superalloys (ISO groups M and S) thanks to the WSM20S coated‑carbide grade and Tiger·tec Silver technology. Is the insert compatible with standard triangular insert holders? Yes, the insert’s 60° triangular form and 16 mm size are compatible with standard toolholders designed for TCGT‑type inserts; verify holder designation matches the insert geometry. What is the function of the MM4 chipbreaker? The MM4 chipbreaker assists chip formation and breaking to prevent long, stringy chips, improving surface finish and reducing the risk of chip interference during turning or drilling‑related operations. How does Tiger·tec Silver benefit machining? Tiger·tec Silver coating increases heat resistance and edge stability, which helps maintain cutting performance and prolongs tool life when machining materials that generate high cutting temperatures. When is a 0.8 mm corner radius recommended? A 0.8 mm corner radius offers a compromise between edge strength and cutting accessibility; it is recommended for general finishing and medium engagement where enhanced edge life is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TCGT16T308-MN2 WN10 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of precise edge geometry, proven chip control and an uncoated carbide grade for consistent turning performance; order directly via Metav Werkzeuge or contact our advisors for application support. TCGT16T308-MN2 WN10 turning insert (Triangle 60°) by Walter Tools The TCGT16T308-MN2 WN10 is a triangular turning insert designed for general-purpose external turning and finishing where a robust edge and predictable chip formation are required. Triangle 60° insert for strong clamping 0.8 mm corner radius for stable edge life MN2 chipbreaker for consistent chip control 7° clearance angle for reliable cutting geometry High-efficiency cutting performance for stable production The triangular indexable insert delivers predictable chip formation through its MN2 chipbreaker, enabling steady machining cycles and reduced interruption time. Manufactured in an uncoated carbide grade (WN10), the cutter is optimised for general turning tasks where consistent edge behaviour is valued. The 0.8 mm corner radius contributes to improved tool life under moderate feed rates and supports dimensional stability on long runs. Such characteristics translate into measurable productivity gains and simpler process control for shops seeking reliable turn-milling operations. Consistent geometry and handling for dependable results With a 60° triangle form and a standard 7° clearance angle, the insert provides secure seating in triangular toolholders and stable cutting directions. The T3 plate thickness and tolerance class G ensure repeatable fitment and minimal backlash when exchanging inserts, reducing setup time and improving reproducibility across batches. These geometric features lower the risk of unexpected vibration and support consistent surface finishes, making the insert suitable for systematic production environments and mixed-batch manufacturing. Material choice and application guidance for confident selection The insert is offered in the WN10 uncoated carbide range; users should verify the grade-to-material matrix for optimal performance. Where catalogue-dependent variants apply, consult the product matrix to confirm suitability for specific workpiece materials. The combination of chip control, a moderate corner radius and robust triangular geometry makes the insert a practical option for shops prioritising uptime and straightforward process parameters rather than specialised high-speed finishing. For advice on matching the grade to particular components, technical consultation is recommended. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and application-specific selections — email info@metav-werkzeuge.com or call +49 2822 7131930 and request guidance for the TCGT16T308-MN2 WN10 insert Technical Data Article number (SKU): TCGT16T308-MN2-WN10-WALTER Product designation: TCGT16T308-MN2 WN10 Product type: Turning insert / indexable insert Manufacturer: Walter Tools Core technical data Insert size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Insert shape: Triangle 60° Tolerance class: G Design & features Grade: WN10 (uncoated carbide) Chipbreaker: MN2 Series: Walter grade series – open Execution: T Material specification: Catalogue dependent FAQ What materials is this insert suited for? The TCGT16T308-MN2 WN10 insert is supplied in the WN10 uncoated carbide grade; suitability for specific materials should be checked against the product matrix before machining. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes consistent chip control and stable evacuation, which helps maintain uninterrupted cycles and predictable surface quality with this insert. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge robustness and reduces chipping risk at moderate feeds, improving tool life and dimensional stability during longer production runs. Is the insert compatible with standard triangular toolholders? The 60° triangular form and T3 thickness conform to common insert geometries, ensuring secure clamping in compatible triangular toolholders. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand name: Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking. Protected trademarks and product names belong to their respective owners. Mark names are used solely for explanatory purposes and do not indicate any affiliation. The offered item is original, brand-new factory product of the manufacturer.
TCGT16T308-MN2 WNN10 MN2 Wendeplatten - Walter Tools
Benefit from the combination of WNN10 coated carbide, the MN2 chipbreaker and a precise 0.8 mm corner radius for consistent chip control and repeatable turning results; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TCGT16T308-MN2 WNN10 indexable insert — triangle 60°, MN2 chipbreaker | Walter Tools TCGT16T308-MN2 WNN10 is a coated carbide indexable insert intended for turning and boring operations where stable chip formation and predictable tool life are required WNN10 coated carbide for wide applicability Chipbreaker MN2 for controlled chip formation Triangle 60° form with 0.8 mm corner radius 7° clearance and T3 thickness for stable contact Consistent chip control that improves cycle stability The combination of a coated carbide grade and the chipbreaker MN2 provides reliable chip segmentation across a range of cutting conditions. The coated substrate is engineered to reduce adhesion and wear, while the MN2 geometry shapes chips to evacuate cleanly from the cutting zone. For production environments this means fewer interruptions caused by tangled chips, improved process stability and a reduction in manual rework. The technical design therefore supports higher machine uptime and predictable component quality. Geometry engineered for strength and surface finish The triangle 60° shape with a 0.8 mm corner radius balances cutting-edge durability and surface quality. A larger corner radius increases edge strength and reduces the likelihood of chipping under interrupted cuts, while still enabling fine surface finishes when light radial engagement is applied. The 7° clearance angle minimises flank contact and the T3 thickness contributes to secure seating in compatible toolholders. Together, these geometric choices deliver repeatable performance where consistent dimensional accuracy is required. Flexible integration into turning and boring toolholders Designed as a combined turning and boring insert, the component integrates with standard clamping systems that accept triangular inserts. The tolerance class G and the 16 mm plate size simplify selection of compatible toolholders and help ensure stable clamping forces during heavy cuts. The insert’s designation identifies its chipbreaker and grade, enabling straightforward pairing with holder types specified for triangle 60° inserts and providing a practical path to retrofit or expand existing tool sets without extensive retooling. Coating and grade insights for reliable wear resistance The WNN10 grade is a coated carbide formulation developed for broad material coverage and predictable wear behaviour. Coatings reduce friction at the cutting edge and extend flank life under varied cutting conditions; the underlying carbide substrate sustains the mechanical loads typical in roughing and finishing passes. For specific workpiece materials and optimal cutting data, consult the manufacturer’s product matrix to match grade performance to the intended application and achieve consistent tool life. Practical considerations for selection and handling When selecting this insert, verify holder compatibility, clamping orientation and the recommended insert seat geometry. Replace inserts at the first signs of edge chipping or progressive flank wear to maintain part tolerances and surface quality. Storage in a dry, protected environment and using correct torque values for the clamping screws will preserve the insert’s integrity and help to achieve the repeatable performance expected from Walter Tools cutting solutions. Discuss application suitability and availability with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCGT16T308-MN2-WNN10-WALTER Designation: TCGT16T308-MN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 16 mm Plate thickness: T3 Clearance angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Tolerance class: G Chipbreaker: MN2 Special features Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Designation without grade: TCGT16T308-MN2 Execution: T FAQ What materials is the TCGT16T308-MN2 WNN10 insert suited for? WNN10 is a coated carbide grade; suitability depends on the workpiece material and cutting conditions—consult the product matrix for recommended material groups and application notes for this insert. What are the key geometry specifications of this insert? The insert features a triangle 60° form, 0.8 mm corner radius, 7° clearance, T3 thickness and a plate size of 16 mm; tolerance class is G and the chipbreaker is MN2. How does the MN2 chipbreaker influence machining? The MN2 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of long, stringy chips and improving process stability, especially in interrupted or varying-depth cuts. Can this insert be used for both turning and boring tasks? Yes, the designation indicates suitability for turning and bored-hole finishing where triangular indexable inserts are accepted; verify holder compatibility and seat geometry before use. Are there specific mounting or handling recommendations for this insert? Fit the insert into a compatible triangular pocket and apply the toolholder manufacturer’s recommended clamping torque; inspect seating faces for cleanliness and replace inserts when edge damage or progressive wear is evident. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer.
TCGW06T102TS-1 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting grade WBH10 and a compact triangle 60° geometry for dependable hard-machining performance; order directly via Metav Werkzeuge or consult our technical team for application guidance. TCGW06T102TS-1 WBH10 indexable turning insert – Walter Tools (CBN grade for hard turning) TCGW06T102TS-1 WBH10 is an indexable turning insert designed for hard machining applications, offering wear-resistant CBN performance and a 60° triangular form for stable interrupted and continuous turning. CBN grade WBH10 for high wear resistance Triangle 60° geometry for versatile cutting 7° relief angle for positive cutting action 0.2 mm corner radius for fine finishing Consistent hard-material performance that reduces downtime The CBN-grade WBH10 is formulated for machining hardened steels, delivering high wear resistance under elevated contact pressures. This material choice translates into longer tool life and fewer insert changes, which reduces stoppages and improves process stability. The combination of a CBN cutting edge with the insert’s geometry helps maintain dimensional accuracy in serial production and keeps rework to a minimum. Geometry that supports precision and versatile tool setups A triangle 60° form offers three usable cutting edges per insert, improving economy and flexibility in toolholders. The 7° relief angle promotes a positive cutting action that reduces cutting forces, while the 0.2 mm corner radius balances edge strength with the ability to produce a fine surface finish. These geometric details make the insert suitable for both finishing passes and controlled roughing on pre-hardened or through-hardened components. Designed for integration into standard turning operations The designation and format ensure straightforward replacement and compatibility with common insert holders. The insert’s concise thickness and size specification allow easy programming of cutting parameters for automated lathes and fixed-tool systems. Clear designation facilitates inventory management and repeatability in process setups, supporting predictable machining cycles and simple tool-change procedures. When to select CBN for the job CBN inserts are recommended when conventional carbide inserts wear rapidly due to high hardness or abrasive workpiece conditions. For components classified under ISO group H (hardened steels), the WBH10 grade is a targeted solution: it resists abrasive wear and edge breakdown that typically shorten tool life, so operators and process planners can expect stable performance across batches and materials with elevated hardness levels. Choose Walter Tools’ CBN grade WBH10 for demanding hard-turning tasks and contact Metav Werkzeuge for tailored application support and immediate availability. Technical data SKU: TCGW06T102TS-1-WBH10-WALTER Product type: Indexable turning insert Designation: TCGW06T102TS-1 WBH10 Series: Walter CBN / Hard material Grade: WBH10 (CBN) Geometry: Triangle 60° Relief angle: 7° Corner radius: 0.2 mm Size: 06 Thickness designation: T1 Tolerance class: G Facts Relief angle: 7° Corner radius: 0.2 mm Size designation: 06 Thickness: T1 Tolerance: G Special features Cutting material: CBN (WBH10) Application: Hard machining / hardened steels Series focus: Walter CBN / Hard material Economy: three cutting edges per insert FAQ What materials is this insert designed for? The TCGW06T102TS-1 WBH10 insert is engineered for hardened steels and similar hard materials; its CBN grade provides abrasion resistance suited to ISO group H applications. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius balances edge strength and surface quality, enabling finer finishes than larger radii while maintaining adequate edge life for many finishing operations. Is the insert compatible with standard triangular holders? The insert’s triangle 60° geometry conforms to common holder designs for triangular inserts, allowing easy integration into existing tooling systems where the corresponding insert seat is specified. Why choose WBH10 over a carbide grade? WBH10’s CBN composition offers superior wear resistance when machining hardened steels, reducing tool changes and maintaining consistent dimensional results compared with conventional carbide grades in such applications. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGW06T102TS-1 WBH20 Wendeplatten - Walter Tools
Take advantage of the combination of CBN-grade wear resistance, precise 0.2 mm corner radius, and a triangular 60° geometry for consistent hard-turning results; order or request advice via Metav Werkzeuge for application-specific recommendations. TCGW06T102TS-1 WBH20 indexable turning insert (CBN) — for hardened steel by Walter Tools TCGW06T102TS-1 WBH20 is an indexable triangular insert designed for high-wear applications and precision hard turning in production environments CBN grade WBH20 for high wear resistance Triangular 60° insert with 0.2 mm corner radius 7° clearance angle for reliable chip control Suitable for hardened steel and hard turning Consistent tool life through CBN technology The insert is built on a CBN-based grade (WBH20) that delivers high wear resistance in demanding hard-turning operations. This translates into longer tool life and fewer indexings, improving uptime and reducing tool-change frequency. CBN is a superhard cutting material tailored for hardened steels, so the material choice directly supports stable cutting forces and predictable consumption rather than frequent, uneven wear. For workshops aiming at repeatable component quality, the CBN grade reduces variability and helps maintain surface integrity over longer production runs. Geometry that improves process reliability A triangular 60° shape combined with a 0.2 mm corner radius and 7° clearance angle gives a balanced compromise between cutting edge strength and dimensional control. The 60° geometry offers three usable cutting edges per index, increasing economic efficiency, while the small corner radius supports tight tolerance finishing on hardened parts. The 7° clearance assists chip flow and reduces rubbing, which lowers cutting temperatures and contributes to more consistent surface finishes. These geometry choices are particularly beneficial where tight dimensional control and stable tool performance are required. Benefits for machining hardened and pre-hardened steels Designed specifically for hard machining, the grade and design are suited to materials classified under ISO group H, including hardened steels and pre-hardened components. Using a CBN insert minimises the need for multiple setups or softer intermediate machining steps, enabling direct hard turning strategies that can shorten cycle times and remove process steps. The result is a cleaner workflow, less fixture handling and a reduced risk of thermal distortion from repeated heat exposure, which supports both productivity and part accuracy. Practical advantages in production environments The insert’s serial designation within the Walter CBN / hard material family ensures consistent quality and clear grade allocation. The built design with chipbreaker "1" helps fragment chips in many turning conditions, aiding evacuation and reducing recutting. Because the insert is indexable, labour for edge changes is low and tool inventory efficiency is improved. For procurement and process planning, the standardised ISO-like designation simplifies identification and replacement in toolholders, supporting rapid maintenance cycles and minimising downtime. Contact Metav Werkzeuge for tailored machining advice and availability of Walter Tools CBN solutions — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: TCGW06T102TS-1-WBH20-WALTER Designation: TCGW06T102TS-1 WBH20 Product type: Indexable turning insert Manufacturer: Walter Tools Core technical data Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Triangle 60° Size: 06 Thickness: T1 Tolerance class: G Special features Series: Walter CBN / hard material Grade: WBH20 (CBN grade) Suitable for: hardened steels (H) Chipbreaker: 1 Execution: W ISO designation: TCGW06T102TS-1 WBH20 FAQ What materials is this insert intended for? The insert is intended primarily for hardened steels and related high-wear materials; the WBH20 CBN grade is optimised for hard machining tasks. How does the 0.2 mm corner radius affect part finish? A 0.2 mm corner radius offers improved edge strength while supporting fine surface quality and dimensional control in finishing passes on hardened components. Can the insert reduce setup steps in the manufacturing process? Yes, using a CBN-based insert from the Walter CBN series enables direct hard turning in many cases, potentially eliminating intermediate soft-machining steps and reducing overall cycle time. How many cutting edges are available per insert? The triangular 60° geometry provides three indexable cutting edges, increasing usable life per insert and lowering replacement frequency. Is chip control improved with this design? The combination of the insert geometry and chipbreaker "1" promotes effective chip control, aiding evacuation and reducing the risk of recutting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
TCGW06T102TS-1 WBK20 Wendeplatten - Walter Tools
Take advantage of a CBN cutting grade combined with a triangle 60° geometry and finely defined edge radius to improve life span and process stability in hard-turning operations; order via Metav Werkzeuge or consult the technical team for application support. TCGW06T102TS-1 WBK20 indexable turning insert, CBN – Walter Tools The TCGW06T102TS-1 WBK20 is a triangle 60° indexable insert in a CBN cutting grade, designed for hard-turning and demanding, high-wear machining tasks CBN grade for hard, high-wear applications Triangle 60° shape for versatile turning 7° clearance angle for controlled cutting geometry 0.2 mm corner radius for fine edge definition Size 06 with T1 thickness for compact tools Engineered for sustained performance in hard machining The insert employs a CBN cutting material that targets the demands of machining hardened steels and similarly abrasive alloys; this composition offers markedly improved wear resistance and thermal stability compared with conventional carbide grades. The result is a longer effective tool life and fewer indexings, which translates into measurable productivity gains. The combination of the WBK20 grade with a 7° clearance and a tight 0.2 mm corner radius ensures a predictable cutting edge, reducing flank wear and maintaining dimensional stability over extended runs. Where finish and repeatability are critical, these attributes support shorter process windows and lower rework rates. Geometry that delivers consistent surface quality and tool control A triangle 60° form provides three effective cutting corners and a compact cutting footprint, aiding access to confined turning profiles and enabling multiple repositions before disposal. The integrated chipbreaker 1 promotes controlled chip formation for turning under interrupted cuts and tough materials, helping avoid built-up edge and erratic cutting forces. Tolerance class G indicates consistent manufacturing precision, which reduces variability when inserts are changed. Together, these geometric features produce a reliable surface finish and help maintain cycle-time targets through steady cutting behaviour. Practical application guidance and materials overview This indexable insert is optimised for turning tasks with hardened workpieces; CBN is particularly suited to steels that have been heat-treated and to applications where abrasive wear dominates. Suitability for materials such as cast iron or superalloys depends on the specific grade matrix and should be checked against the product documentation or with a tooling specialist. The insert’s compact format (size 06 and thickness T1) suits small to medium toolholders where space and rigidity must be balanced. For best results, pairing the insert with a rigid holder and appropriate cutting parameters will preserve the edge, limit vibration and support stable chip evacuation. Mounting considerations and process integration The insert designation identifies the geometry and mounting face; correct clamping and the use of a compatible toolholder are essential to exploit the grade’s characteristics. The modest corner radius supports fine finishing passes or operations where a small edge is required to maintain profile accuracy. Because the cutting concept focuses on hard, high-wear conditions, cooling strategy and feed adjustments must reflect the workpiece hardness and machine dynamics to avoid thermal overloading. Technical consultation and verification against the machining matrix are recommended before series production to ensure the chosen insert and parameters match the specific application. For tailored application advice and supply of Walter Tools WBK20 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatible holders and cutting parameters Technical Data Article number: TCGW06T102TS-1-WBK20-WALTER Designation: TCGW06T102TS-1 WBK20 Product type: indexable turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Triangle 60° Insert size: 06 Thickness: T1 Chipbreaker: 1 Tolerance class: G Special features Cutting material: CBN cutting grade (WBK20) Series: Walter Schneidstoffsorte - Serie offen Geometry: three cutting corners, compact footprint Application focus: hard turning and high-wear tasks FAQ What materials is this insert intended for? The insert uses the WBK20 CBN cutting grade and is intended primarily for hardened steels and other high-wear workpieces; material suitability should be verified against the manufacturer’s product matrix. How does the 0.2 mm corner radius affect the cut? A 0.2 mm corner radius produces a finer cutting edge that supports improved profile accuracy and surface finish while limiting impact loads during finishing passes. Can this insert be used in standard toolholders? The TCGW06T102TS-1 WBK20 designation corresponds to common indexable insert formats; however, compatibility depends on the specific holder. Confirm seat and clamping geometry before fitting. What advantage does the CBN grade offer over carbide for these tasks? The CBN material delivers superior wear resistance and thermal stability in hard-turning conditions, yielding longer life and more consistent part tolerances compared with carbide grades. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product from the manufacturer.
TCGW06T104TS-1 WBH10 Wendeplatten - Walter Tools
Take advantage of the high wear resistance and application-specific CBN grade combined with a compact triangular geometry for secure seating and consistent part quality; order directly via Metav Werkzeuge or contact our consultants for material‑specific advice. TCGW06T104TS-1 WBH10 indexable turning insert — CBN grade, 60° triangular for hardened steels | Walter Tools The TCGW06T104TS-1 WBH10 is a triangular indexable turning insert developed for hard turning and precision machining of hardened steels, offering robust edge stability and repeatable performance in demanding operations. *CBN grade for hard machining *60° triangular form for stable clamping *0.4 mm corner radius for precise edge control *7° relief angle for secure cutting geometry Optimised productivity for hardened materials The insert’s CBN cutting material is designed specifically for the high demands of hard turning; it sustains cutting temperatures and abrasion better than conventional grades, which reduces flank wear and extends tool life. This performance leads to fewer tool changes and higher machine uptime, enabling a measurable increase in process efficiency. The triangular geometry ensures three usable edges and a compact clamped seat, improving repeatability and reducing setup variation in serial production. Geometry and edge specification that improve surface integrity A 60° triangular shape combined with a 0.4 mm corner radius delivers a balance between strength and finishing capability. The modest corner radius supports controlled chip formation and helps maintain dimensional accuracy on tight-tolerance turned features. The 7° relief (clearance) minimises rubbing on the flank, lowering heat transfer into the workpiece and contributing to consistent surface finish on hardened components. Reliable chip control and secure clamping for demanding cuts Equipped with chipbreaker 1 and a T1 thickness, the insert manages chips effectively under the elevated forces encountered when cutting hardened steels. Predictable chip behaviour reduces the risk of built-up edge and improves operator confidence during roughing and finishing passes. The compact insert form also promotes stable clamping, which reduces vibration and supports higher feed rates where the process allows. Application guidance and process security The insert is part of the Walter CBN / Hartstoff series and is recommended for hard-to-machine alloys and hardened steels according to the manufacturer’s application scope. For applications involving pre-hardened steels or components requiring long tool life and constant surface quality, this insert provides a technically robust solution. For material-specific machining parameters and to ensure the correct holder and clamping system, further consultation with Metav Werkzeuge is advised. Contact Metav Werkzeuge for tailored application support or to request a specification sheet and machining recommendations for Walter Tools CBN inserts Technical Data Article number: TCGW06T104TS-1-WBH10-WALTER Designation: TCGW06T104TS-1 WBH10 Manufacturer: Walter Tools Product type: indexable turning insert Series: Walter CBN / Hartstoff Facts Corner radius: 0.4 mm Relief angle: 7° Insert shape: 60° triangle Size code: 06 Thickness: T1 Tolerance class: G Special features CBN cutting grade WBH10 Suitable for hardened steels (H) Application: hard turning, finishing and semi‑finishing of hardened components Chipbreaker: 1 Execution: W FAQ What materials is this insert suited for? The TCGW06T104TS-1 WBH10 insert, from Walter Tools’ CBN series, is designed primarily for hardened steels and other hard materials where high wear resistance is required. How does the CBN grade affect tool life? The CBN grade WBH10 provides superior abrasion resistance in hard turning, extending the insert’s life relative to conventional carbide grades under comparable cutting conditions. Can this insert be used for finishing passes? Yes — the combination of a 0.4 mm corner radius and the stable triangular seat makes the insert suitable for finishing and semi‑finishing operations on pre‑hardened and hardened components. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGW06T104TS-1 WBH20 Wendeplatten - Walter Tools
High wear resistance and a controlled cutting geometry combine to deliver consistent performance in hard turning applications. The WBH20 CBN grade and the triangle 60° form factor provide stable cutting and long tool life under high stresses. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific cutting data. TCGW06T104TS-1 WBH20 turning indexable insert — CBN grade, triangle 60° | Walter Tools A TCGW06T104TS-1 WBH20 turning insert developed for hard and pre-hardened steel turning, optimised for dependable hard machining and finishing operations CBN grade WBH20 for hard machining Triangle 60° geometry for robust cutting 7° relief angle for stable cutting action 0.4 mm corner radius for durable edge Maximum wear resistance for hardened steels The combination of CBN technology and the WBH20 grade makes this insert especially suited to hardened steels and pre‑hardened workpieces. CBN (cubic boron nitride) is a superabrasive designed for sustained performance where conventional carbides can wear rapidly; the result is high wear resistance and predictable tool life in demanding hard‑turning tasks. The insert’s composition and series classification — Walter CBN / Hard material — ensure suitability for materials where hardness and abrasive wear dominate the machining challenge. Consistent geometry for improved surface and process stability The triangle 60° form offers a robust cutting edge and multiple indexable corners, while the 7° relief contributes to a stable shear plane and controlled chip flow. A 0.4 mm corner radius balances edge strength with surface integrity, helping to reduce microchatter and maintain a consistent finish. Together these geometry choices support stable cutting geometry and predictable outcomes, enabling longer uninterrupted cycles and fewer tool changes in high‑stress operations. Productivity gains through process reliability and longevity As an indexable insert from Walter Tools, this grade is engineered to deliver consistent results in serial production: longer tool life, reduced downtime and steady surface quality. The insert’s design supports hard machining strategies that favour sustained depth of cut and lower feed variability, which in turn improves overall throughput. Where repeatability and process reliability are priorities, the robust edge and CBN performance translate into measurable productivity benefits and lower unit costs over longer runs. For hard turning applications requiring high wear resistance and consistent results, contact Metav Werkzeuge for tailored cutting data and availability via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: TCGW06T104TS-1-WBH20-WALTER Designation: TCGW06T104TS-1 ISO designation: TCGW06T104TS-1 WBH20 Manufacturer: Walter Tools Facts Geometry: Triangle 60° Relief angle: 7° Corner radius: 0.4 mm Plate size: 06 Plate thickness: T1 Tolerance class: G Chipbreaker: 1 Special features Grade: WBH20 (CBN) Series: Walter CBN / Hard material Suitable for hardened and pre‑hardened steel (H) Application: Hard machining / hard turning Execution: W FAQ Which materials is this insert intended for? This insert is designed for hardened steels and pre‑hardened workpieces; the WBH20 CBN grade ensures high wear resistance for such materials. What does WBH20 mean for performance? WBH20 denotes a Walter CBN grade optimised for hard machining, offering a balance of wear resistance and edge stability for consistent machining of hardened steels. How does CBN compare to carbide for hard turning? CBN, as used in this grade, provides superior wear resistance and longer life on hard steels compared with conventional carbide, improving process reliability in demanding operations. What advantages does the triangle 60° geometry provide? The triangle 60° form offers multiple indexable edges and a robust cutting corner, making it suitable for interrupted cuts and applications that demand edge strength. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trade names and trademarks are the property of their respective owners. Brand names are mentioned for explanatory purposes only; no affiliation is implied. The offered article is original factory‑new merchandise of the manufacturer.
TCGW06T104TS-1 WBK20 Wendeplatten - Walter Tools
The combination of a CBN-grade cutting material and a compact triangular geometry delivers reliable performance for hard turning and high-wear applications; the WBK20 grade extends tool life while preserving surface quality. Benefit from stable chip control and consistent cutting parameters for serial production — order the insert directly via Metav Werkzeuge or ask the consultants if needed. TCGW06T104TS-1 WBK20 – indexable turning insert, CBN grade, triangular 60° (Walter Tools) TCGW06T104TS-1 WBK20 is an indexable turning insert engineered for demanding hard-machining tasks, offering a CBN cutting grade suited to hardened steels and wear-intensive components. CBN cutting grade for hard materials Triangular 60° insert for versatile turning 7° clearance for stable chip formation 0.4 mm corner radius for fine edge definition High-performance hard turning through CBN technology The core advantage of this insert is its CBN composition in the WBK20 grade, developed for consistent performance in abrasive and hardened materials. CBN inserts maintain a sharp, wear-resistant cutting edge at elevated temperatures and under heavy mechanical load, which reduces downtime caused by frequent indexing and regrinding. As a result, cycle times can be stabilised and component tolerances maintained, supporting cost-effective high-volume production without compromising surface integrity. Geometry engineered for precision and edge security The triangular 60° shape combined with a 0.4 mm corner radius and 7° clearance produces a predictable cutting edge geometry that balances strength and finish. The smaller corner radius concentrates cutting forces for precise profile work and minimises burr formation, while the clearance angle prevents rubbing on the flank face during interrupted cuts. The integrated chipbreaker concept promotes controlled chip formation, reducing the risk of chip entanglement and improving tool life through steady thermal and mechanical load distribution. Application range and material suitability Designed under the Walter Schneidstoffsorte series, the insert is intended primarily for hardened steels and other high-wear materials; depending on the specific component and operation, cast materials or superalloys may also be addressed with this grade. The designation emphasises that material compatibility should be verified against the manufacturer’s matrix: this ensures optimal selection of cutting data and coolant strategy for the given workpiece. The catalogue-dependent substrate information means substrate and coating details are matched to application needs to secure process reliability. Integration into production and handling guidance The insert’s tolerance class and standardised indexable geometry support repeatable clamping and rapid tool changes in automated turning centres. Dimensional consistency (tolerance class G) enables straightforward tool balancing and reduced set-up times. For process integration, verify toolholder compatibility with the TCGW06T104TS-1 form and follow Walter Tools’ clamping recommendations to obtain the designed cutting performance. Application advice and specification matching are available from Metav Werkzeuge to support implementation into existing toolsets. For severe hard-turning and wear-resistant operations, select the Walter Tools CBN-grade TCGW06T104TS-1 WBK20 insert and contact Metav Werkzeuge for tailored application support and fast availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCGW06T104TS-1-WBK20-WALTER SKU: TCGW06T104TS-1-WBK20-WALTER Designation: TCGW06T104TS-1 WBK20 Manufacturer: Walter Tools Product type: indexable turning insert Series: Walter Schneidstoffsorte - Serie offen Core measurements Insert shape: Dreieck 60° (triangular 60°) Corner radius: 0.4 mm Clearance angle: 7° Size: 06 Thickness: T1 Chipbreaker: 1 Tolerance class: G Execution: W Materials & application Cutting material: CBN (WBK20) Material information: catalogue-dependent Typical applications: hardened steels; castings or superalloys (sort-dependent) Note: Check the product matrix for material suitability FAQ What materials is this insert suitable for? The TCGW06T104TS-1 WBK20 insert employs a CBN cutting material and is intended primarily for hardened steels; depending on the grade configuration, cast materials or superalloys can be processed — suitability should be checked against the product matrix. How does the 0.4 mm corner radius affect component finish? A 0.4 mm corner radius concentrates cutting forces to produce precise edge definition and reduced burrs, improving surface quality while maintaining edge strength for intermittent and continuous turning. Is the insert compatible with standard toolholders for triangular inserts? Yes, the insert conforms to standard triangular indexable geometries (60°) and is usable in holders designed for the TCGW form; ensure the toolholder matches the TCGW06T104TS-1 geometry for proper clamping. What does the WBK20 designation mean for tool life? The WBK20 grade denotes a Walter CBN grade focused on wear resistance in hard machining, which typically extends tool life and preserves surface integrity under high-temperature and abrasive conditions. Are there any special coolant or cutting parameter recommendations? Cutting parameters depend on workpiece material and machine rigidity; consult the Walter Tools data sheet and the Metav Werkzeuge application team for recommended speeds, feeds and coolant strategies for the TCGW06T104TS-1 WBK20 insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TCGW090204FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of WDN10 polycrystalline diamond performance combined with precise 60° triangle geometry for reliable machining of abrasive, non‑ferrous materials; order directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TCGW090204FS-1 WDN10 — Triangle 60° PKD insert for boring and turning (Walter Tools) The TCGW090204FS-1 WDN10 is a triangle 60° indexable insert designed for boring, enlarging and general turning applications where polycrystalline diamond (PKD) is required for high wear resistance in non‑ferrous and abrasive, non‑iron materials. Polycrystalline diamond (PKD) WDN10 grade Triangle 60° geometry for secure seating 0.4 mm corner radius for fine edge form 7° relief angle for improved chip control Exceptional wear resistance for abrasive, non‑ferrous applications The insert uses polycrystalline diamond (PKD) in the WDN10 grade, a cutting material class known for outstanding wear resistance. This makes the insert ideal when machining abrasive non‑iron workpieces such as aluminium alloys containing fillers, graphite or composites where conventional carbide wears quickly. PKD provides long tool life and consistent performance, reducing tool change frequency and improving overall process economy. For exact material boundaries, the product matrix should be consulted. Stable geometry for consistent surface finish and dimensional control A triangle 60° plate form with a 0.4 mm corner radius and 7° relief angle combines rigidity with a finely defined cutting edge. The geometry minimises vibration in boring and turning operations, resulting in a better surface finish and tighter tolerances. The moderate corner radius supports controlled cutting forces and helps avoid edge chipping during interrupted cuts. These design choices support stable, repeatable machining in series production and one‑off challenging parts alike. Process advantages and application guidance for production use The insert is specified for use in boring, enlarging and turning operations where abrasive, non‑ferrous materials predominate. Its PKD construction yields long tool life and predictable wear behaviour, which benefits cycle time and scrap reduction in high‑volume or mixed‑material workflows. For machining of different materials or mixed batches, verify compatibility in the product matrix and select suitable toolholders and clamping systems to maintain the geometry integrity of the insert during high‑precision operations. Contact Metav Werkzeuge for tailored application advice and to request the TCGW090204FS-1 WDN10 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance on Walter Tools inserts Technical Data Article number: TCGW090204FS-1-WDN10-WALTER Name: TCGW090204FS-1 WDN10 Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Relief angle: 7° Corner radius: 0.4 mm Plate size code: 09 Thickness code: 02 Tolerance class: G Special features Grade: WDN10 (PKD) Cutting material class: polycrystalline diamond (PKD) Series: Walter Schneidstoffsorte - Serie offen Chipbreaker: 1 Plate form: Triangle 60° Execution: W Application note: suitability per product matrix FAQ What materials is this insert best suited for? The TCGW090204FS-1 WDN10 insert is intended primarily for non‑ferrous and abrasive, non‑iron materials, leveraging PKD to resist wear where conventional carbide would fail. Can the insert be used on steel or stainless applications? This PKD grade is optimised for abrasive non‑iron materials; for steel or rostfreier Stahl machining, a carbide or coated carbide grade is normally recommended rather than the WDN10 PKD insert. What does the 0.4 mm corner radius mean for machining results? A 0.4 mm corner radius provides a finer cutting edge for improved surface finish while still offering robustness against minor interruptions; it balances finish and edge strength for turning and boring. How does the triangle 60° form influence toolholding and stability? The triangle 60° geometry offers secure seating in appropriate toolholders, increasing stability during boring and turning and contributing to consistent dimensional control. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
TCGW090204FS-9 WDN10 Wendeplatten - Walter Tools
TCGW090204FS-9 WDN10 – Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte von Walter Tools Die TCGW090204FS-9 WDN10 ist eine PKD-Drehwendeschneidplatte für präzise Aufbohr- und Drehbearbeitung abrasiver Nicht-Eisenmetalle und schwer zu bearbeitender Verbundwerkstoffe. Hochverschleißfestes PKD-Schneidstoff Dreiecksform 60° für stabile Schneide Freiwinkel 7° für kontrollierte Spanabfuhr Eckenradius 0,4 mm für saubere Schnittkanten Optimierter Spanbrecher für gleichmäßige Späne Produktivitätssteigerung bei abrasiven Werkstoffen Die Verwendung von polykristallinem Diamant (PKD) ermöglicht deutliche Produktivitätsvorteile bei der Bearbeitung abrasiver Nichteisenmetalle. Durch die hohe Verschleißfestigkeit reduziert sich der Werkzeugwechsel, was Stillstandszeiten verkürzt und die Gesamtkosten pro Bauteil senkt. Anwender profitieren von konstanter Leistung über längere Werkzeugstandzeiten hinweg, was insbesondere bei Serienfertigung und Lohnbearbeitung die Prozesssicherheit erhöht. Konstruktion und Geometrie für stabile Schnitte Die Kombination aus Dreieck 60°, Freiwinkel 7° und einem Eckenradius 0,4 mm sorgt für eine hohe Standfestigkeit der Schneide und gute Kontrolle über Schnittkräfte. Die Plattengröße 09 und die Plattendicke 02 liefern eine belastbare Einspannfläche, während der integrierte Spanbrecher 9 die Spanformung verbessert. Das Ergebnis ist eine gleichmäßigere Oberflächengüte und reduzierte Vibrationen bei Aufbohr- und Drehoperationen. Zielgruppe und typische Einsatzfelder Werkstätten, Lohnfertiger und Produktionsbetriebe, die abrasive Aluminiumlegierungen, Graphit, faserverstärkte Kunststoffe oder andere nicht eisenhaltige, abrasive Werkstoffe bearbeiten, finden in dieser Wendeplatte eine wirtschaftliche Lösung. Die Platte eignet sich besonders für Serienprozesse, bei denen Wiederholgenauigkeit und geringe Nachbearbeitung wichtig sind. Hinweise zur Anwendung und Auswahl Die Sorte WDN10 ist als PKD-Schneidstoff gekennzeichnet; die konkrete Werkstoffeignung ist anhand der Produktmatrix zu prüfen. Vor der Freigabe für neue Werkstoffkombinationen sollten Schnittdaten und Kühlmittelkonzepte abgestimmt werden. Für optimale Ergebnisse empfiehlt sich die Abstimmung der Schnittparameter auf Maschine, Spannmittel und Werkstückaufmaß. Für eine effiziente und prozesssichere Bearbeitung abrasiver Nichteisenmetalle empfiehlt Metav Werkzeuge die TCGW090204FS-9 WDN10 von Walter Tools; bei Rückfragen zur Prozessoptimierung oder zur Auswahl der passenden Schneidstoffsorte kontaktieren Sie bitte unsere Anwendungstechnik per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: TCGW090204FS-9-WDN10-WALTER Marke: Walter Tools Ausführung: W Serie: Walter Schneidstoffsorte - Serie offen Toleranzklasse: G Fakten Freiwinkel: 7° Eckenradius: 0,4 mm Plattengröße: 09 Plattendicke: 02 Spanbrecher: 9 Besonderheiten Schneidstoffklasse: polykristalliner Diamant (PKD) Plattenform: Dreieck 60° Bezeichnung: TCGW090204FS-9 WDN10 Material: Katalogabhängig Sortenhinweis: Werkstoffeignung anhand Produktmatrix prüfen FAQ Für welche Werkstoffe ist diese Wendeplatte geeignet? Die TCGW090204FS-9 WDN10 von Walter Tools ist für abrasive Nicht-Eisenmetalle und abrasive, nicht eisenhaltige Werkstoffe konzipiert; die konkrete Eignung sollte anhand der Produktmatrix überprüft werden. Welche Vorteile bietet PKD gegenüber Hartmetall bei diesen Anwendungen? PKD bietet eine deutlich höhere Verschleißfestigkeit auf abrasiven Werkstoffen, was in längeren Standzeiten und konstanter Schnittqualität bei der TCGW090204FS-9 WDN10 resultiert. Wie beeinflusst der Freiwinkel von 7° die Bearbeitung? Ein Freiwinkel von 7° reduziert Reibung an der Schneide und unterstützt eine kontrollierte Spanabfuhr, was die Oberflächengüte verbessert und die Belastung der Schneide verringert. Ist diese Wendeplatte für Serienfertigung geeignet? Ja, die konstruktive Stabilität und der verschleißfeste PKD-Schneidstoff machen die TCGW090204FS-9 WDN10 besonders geeignet für Serienprozesse mit hohen Stückzahlen. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com