SX-8E800N08-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from a combination of thermal resistance and stabilised cutting performance for predictable tool life in demanding stainless and heat‑resistant alloy machining. The grade’s Tiger·tec Gold coating and engineered chipbreaker improve process stability and reduce rework risk — order directly via Metav Werkzeuge or contact their advisors for application support. SX-8E800N08-CE4 WSM33G — Indexable turning/milling insert, Tiger·tec Gold (Walter Tools) The SX-8E800N08-CE4 WSM33G is a coated, indexable insert developed for high‑duty machining of stainless steels and heat‑resistant superalloys, offering a balance of edge stability and thermal resistance suitable for demanding production environments. Tiger·tec Gold coated carbide grade WSM33G Optimised for stainless steel and superalloys Stable cutting edge for long tool life Reliable chip control under heavy conditions Engineered grade for difficult materials that extends tool life The combination of the Tiger·tec Gold coating with the WSM33G cutting grade creates a coated carbide solution designed to resist abrasive wear and thermal loading during heavy cuts. This engineered surface reduces adhesion and improves heat management, which supports a stable cutting edge and consistent performance when machining stainless steel and superalloys. The result is fewer unscheduled tool changes and a lower scrap rate, translating into measurable production gains for component runs where material toughness and work hardening are challenges. Consistent chip formation and process reliability The integrated chip geometry 8E800N08-CE4 promotes controllable chip breakage and evacuation even under elevated cutting temperatures. As an indexable insert, the design focuses on reproducible chip flow and reduced vibration, which stabilises the cutting process and helps maintain surface finish over longer tool lives. Improved chip control reduces cycle interruptions and cleaning time at the machine, supporting higher machine utilisation and more predictable machining windows for medium-to-heavy finishing and roughing operations. Practical advantages for the workshop and production planning Selection of this insert supports compliance with the machining recommendations for material groups under ISO 513, specifically for M (stainless steel) and S (heat‑resistant alloys and titanium) applications. The grade’s high‑temperature performance and edge robustness provide repeatable results across batch sizes, simplifying tool inventory choices and shortening setup validation. For shops seeking both reliability and efficiency, this insert offers a straightforward route to improved production efficiency and consistent component quality when processing demanding materials. For tailored cutting data and recommended insert geometries for specific materials, contact Metav Werkzeuge for individual consultation and delivery options: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SX-8E800N08-CE4-WSM33G-WALTER Label: Drehwendeschneidplatte / Fräswendeschneidplatte SX-8E800N08-CE4 WSM33G Walter Tools Product type: Indexable turning/milling insert Series: Tiger·tec Gold Grade: WSM33G Chipbreaker: 8E800N08-CE4 Material designation: S / M Manufacturer: Walter Tools Facts Suitable for stainless steel (M) Suitable for heat‑resistant superalloys and titanium (S) ISO reference: ISO 513 material groups Coating technology: Tiger·tec Gold (coated carbide) Special features Coated carbide cutting grade Optimised for high thermal loads Engineered chip control geometry 8E800N08-CE4 Designed for stable cutting edge and repeatable performance Suitable for demanding finishing and medium-to-heavy machining FAQ What materials is this insert intended for? The SX-8E800N08-CE4 WSM33G insert is intended for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), depending on the chosen geometry. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating increases wear resistance and reduces adhesion, improving edge life and thermal behaviour of the insert during continuous cutting. What role does the 8E800N08-CE4 chipbreaker play? The 8E800N08-CE4 chipbreaker controls chip formation and evacuation, lowering the risk of built‑up edge and helping to maintain surface finish in demanding cuts. Is this insert suitable for finishing operations on stainless steel? Yes, the grade and geometry provide the edge stability and heat management needed for consistent finishing on many stainless steel grades. How should tool selection be adapted for titanium alloys? When machining titanium, select appropriate cutting parameters and, where necessary, a geometry optimised for S‑group materials; the WSM33G grade supports such applications due to its heat‑resistant properties. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new article of the manufacturer.
SX-8E800N08-UF4 WKP23G Wendeplatten - Walter Tools
High process reliability and extended tool life result from the combination of the Tiger‑tec Gold coating and the WKP23G grade, which are optimised for productive machining of steel and cast iron. Stable chip formation and a robust cutting edge reduce downtime and support consistent surface quality. Order the insert directly via Metav Werkzeuge or ask their consultants for application-specific advice. SX-8E800N08-UF4 WKP23G — Turning indexable insert for steel and cast iron | Walter Tools The SX-8E800N08-UF4 WKP23G is an indexable turning insert from the Tiger‑tec Gold series, engineered for productive and reliable machining of steel and cast iron. Tiger‑tec Gold coating for extended tool life Reliable chip control for consistent machining Optimised for steel and cast iron applications Stable cutting edge for high process reliability Boosted productivity through advanced coating and grade The combination of Tiger‑tec Gold coating and the WKP23G grade delivers measurable gains in tool life and process reliability. The coating is a multi-layer, PVD/CVD‑type technology developed to reduce abrasive wear and thermal impact during high‑speed turning; this translates into fewer index changes and lower tooling costs per part. As a consequence, the insert supports longer uninterrupted runs and predictable performance in mixed production environments, providing a clear cost‑benefit when machining components from steel and cast iron. The selected coated carbide substrate ensures edge stability under typical cutting temperatures, so shops benefit from consistent component tolerances and reduced scrap rates. Consistent chip control for improved surface finish and uptime The geometry identified by the chipformer code 8E800N08‑UF4 has been designed to shape and evacuate chips effectively across a range of feeds and depths of cut. Good chip control reduces the risk of re-cutting, protects the workpiece surface and minimises tool‑holder interference. In practical terms, this means improved surface finish and fewer machine stoppages due to chip build‑up. The insert is tuned for the brittle and often abrasive chip behaviour of cast iron as well as the ductile chips from steel grades, so the combination of form and grade yields stable cutting conditions that support repeatable production quality. Practical advantages that simplify workshop integration As an indexable turning solution from Walter Tools, this insert offers easy integration into standard toolholder systems and predictable performance across typical turning tasks. The design intent focuses on reproducible results and straightforward tool management, lowering set‑up time and promoting efficient inventory rotation. Beyond immediate productivity gains, the proven behaviour of the grade contributes to long‑term process reliability and operator confidence. For detailed application recommendations or to verify compatibility with specific toolholders and machining parameters, Metav Werkzeuge’s technical advisors can supply exact data and cutting charts to match each production scenario. Contact Metav Werkzeuge today for tailored application support and to secure the appropriate Tiger‑tec Gold inserts for critical turning operations. Technical data Article number: SX-8E800N08-UF4-WKP23G-WALTER Product type: Turning indexable insert Insert designation: SX-8E800N08-UF4 WKP23G Facts Series: Tiger‑tec Gold Grade: WKP23G Chipformer: 8E800N08‑UF4 Applicable material groups: P (steel), K (cast iron) Special features Coated carbide (coating technology: Tiger‑tec Gold) Stable cutting edge and optimised chip control Manufacturer: Walter Tools SKU: SX-8E800N08-UF4-WKP23G-WALTER FAQ What materials is this insert suitable for? The SX-8E800N08‑UF4 WKP23G insert is designed for ISO groups P and K, meaning it is suitable for a wide range of steel grades and cast iron applications. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating reduces abrasive and thermal wear, improving tool life and enabling longer uninterrupted production cycles with consistent surface quality. What benefit does the chipformer 8E800N08‑UF4 provide? The chipformer geometry promotes controlled chip breakage and evacuation, which helps to protect the workpiece surface and reduces machine downtime caused by chip-related issues. Is this insert compatible with standard turning toolholders? Yes, the insert is manufactured to established indexable insert designations and is compatible with matching standard toolholders for turning operations. Where to get application data and cutting parameters? Application‑specific cutting data and recommendations are available from Metav Werkzeuge; they can supply charts and parameters tailored to the workpiece material and machine set‑up. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The item offered is original, factory‑new goods of the manufacturer.
SX-8E800N08-UF4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a stable cutting edge to ensure longer tool life and reliable chip formation when machining demanding materials; order directly via Metav Werkzeuge or ask our consultants for tailored cutting data. SX-8E800N08-UF4 WSM33G – indexable turning insert with Tiger·tec Gold coating, Walter Tools The SX-8E800N08-UF4 WSM33G is an indexable turning insert engineered for heavy-duty machining of stainless steels and heat-resistant superalloys, offering optimised wear resistance and secure chip control in challenging turning operations Tiger·tec Gold coating for extended tool life Optimised for stainless steels and superalloys Stable cutting edge for secure chip control Universal chipbreaker 8E800N08-UF4 for versatility Higher productivity through advanced coating and grade The combination of the Tiger·tec Gold coating with the WSM33G grade provides enhanced wear resistance under the high temperatures and stresses typical of turning operations in difficult-to-machine materials. This ceramic-enhanced coating system reduces flank wear and supports a longer tool life, meaning fewer insert changes and less unplanned downtime. By selecting an insert that resists thermal softening, production cycles remain stable and cutting parameters can be kept consistent, delivering predictable throughput and improved overall machining efficiency. Predictable chip formation and process security A stable cutting edge and an optimised chipbreaker geometry deliver reliable chip control, minimising built-up edge and irregular chips that compromise surface finish and tool life. The specified chipbreaker, 8E800N08-UF4, is designed to assist in controlled chip evacuation when machining stainless steels and superalloys, reducing the risk of recut or tool damage. Consistent chip behaviour simplifies parameter selection and contributes to a safer, more manageable process, particularly in continuous production environments where repeatability is essential. Versatile integration for demanding turning applications As an indexable turning insert, the SX-8E800N08-UF4 WSM33G integrates easily into common turning toolholders and clamping systems, providing a straightforward route to upgrade existing setups. The insert’s geometry and coating make it suitable for a range of turning strategies, from roughing heavy sections to stable semi-finishing passes in materials that exhibit high toughness and poor thermal conductivity. This versatility allows shops to standardise on a single insert family for multiple components, reducing inventory complexity while maintaining performance. Confidence in results and application support The material designation (S / M) indicates suitability for stainless steels (M) and heat-resistant superalloys/titanium alloys (S), ensuring the insert is matched to the mechanical and thermal demands of these groups. The combination of a robust substrate, advanced coating technology and an engineered chipbreaker promotes consistent surface integrity and extended edge life, supporting higher first-pass yields. For process optimisation, cutting data can be adapted to machine setup and component geometry to further increase productivity and reproducibility. Contact Metav Werkzeuge for application-specific cutting data, recommendations for Tiger·tec Gold inserts and detailed machining advice; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: SX-8E800N08-UF4-WSM33G-WALTER Name: Indexable turning insert SX-8E800N08-UF4 WSM33G (Walter Tools) Type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM33G Facts Chipbreaker: 8E800N08-UF4 Applicable material groups: S / M Designation: SX-8E800N08-UF4 WSM33G UID: SX-8E800N08-UF4-WSM33G-WALTER Special features Coating technology: Tiger·tec Gold Designed for tough-to-machine materials Emphasis on thermal stability and edge durability Optimised chip control for continuous turning operations FAQ What materials is this insert designed for? The SX-8E800N08-UF4 WSM33G is designed for stainless steels and heat-resistant superalloys (material groups M and S) and is intended to provide secure chip formation and thermal resistance in those applications. How does the Tiger·tec Gold technology help in turning operations? The Tiger·tec Gold coating increases wear resistance and thermal stability of the insert, which extends tool life and helps maintain consistent cutting conditions when machining demanding materials. Which chipbreaker is used and what benefit does it provide? The insert features the 8E800N08-UF4 chipbreaker, which is optimised for controlled chip evacuation and reduced built-up edge when machining stainless steels and superalloys. Can the insert be used for both roughing and finishing? Yes, the insert’s combination of grade and geometry allows for flexible use across heavier roughing passes and stable semi-finishing operations, depending on cutting parameters and toolholder setup. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-8E800N08-UF4 WSM43G WSM43G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM43G grade to achieve reliable cutting-edge stability and secure chip formation in stainless steels and heat-resistant superalloys; order or request further machining advice from Metav Werkzeuge for process optimisation. SX-8E800N08-UF4 WSM43G turning insert – Tiger·tec Gold coated, for stainless steels and superalloys | Walter Tools The SX-8E800N08-UF4 WSM43G is a Tiger·tec Gold coated turning insert engineered for demanding turning operations in rostfreier Stahl (stainless steels) and heat-resistant superalloys, offering enhanced thermal stability and consistent chip control. Tiger·tec Gold coated for high thermal resistance WSM43G grade – optimised for stainless and superalloys Coated carbide for stable cutting edge and chip control Suitable for heavy-duty, hard-to-machine materials Consistent performance through thermal stability and coating technology The Tiger·tec Gold coating provides improved heat resistance and reduced friction at the cutting zone, which translates into steadier machining conditions and fewer unexpected interruptions. By combining a modern coating system with a coated carbide substrate, the insert sustains its cutting geometry under elevated temperatures typical for machining rostfreier Stahl and superalloys. This technical pairing leads to longer effective tool life and more predictable productivity, supporting continuous production cycles and minimising unscheduled tool changes. Controlled chips and reliable cutting-edge integrity for demanding materials The WSM43G grade is formulated to support secure chip formation and a stable cutting edge when machining work-hardened or heat-prone materials. For ISO 513 material groups M and S — representing stainless steels and heat-resistant superalloys/titanium respectively — the grade helps to avoid built-up edge and erratic chip behaviour. The result is improved surface quality and repeatable dimension control, which reduces post-process rework and contributes to lower overall machining costs through enhanced process reliability. Application-driven advantages: where this insert adds value Designed for heavy-duty turning tasks, the insert is particularly suitable where toughness and thermal resistance are required simultaneously. In practice, this means dependable performance for components exhibiting high hardness, poor thermal conductivity or those that generate strong cutting heat. The combination of coating, grade and geometry supports consistent outcomes across batch and single-part production, making it a sound choice for workshops and subcontractors aiming for higher first-pass yields and reduced downtime. Discuss machining parameters and holder compatibility with Metav Werkzeuge to fully exploit the SX-8E800N08-UF4 WSM43G’s Tiger·tec Gold advantages and secure optimal cycle times and surface finishes Technical Data Article number: SX-8E800N08-UF4-WSM43G-WALTER Designation: SX-8E800N08-UF4 WSM43G Type: Turning insert Series: Tiger·tec Gold Grade: WSM43G Manufacturer: Walter Tools Core data Applicable material groups: S, M Insert geometry / chipbreaker: 8E800N08-UF4 Coating technology: Tiger·tec Gold Special features Coated carbide grade Optimised for hard-to-machine materials Stable cutting edge and secure chip control FAQ What materials is this insert designed to machine? The SX-8E800N08-UF4 WSM43G insert is designed primarily for rostfreier Stahl (stainless steels) and heat-resistant superalloys, matching the ISO 513 groups M and S. How does the Tiger·tec Gold coating benefit the machining process? The Tiger·tec Gold coating on the turning insert reduces friction and improves heat resistance, which helps maintain cutting-edge integrity and consistent chip formation during prolonged or high-temperature cutting. Is the WSM43G grade suitable for titanium machining? Yes; the WSM43G grade is formulated for heat-resistant alloys and can be applied to titanium and similar alloys categorized under ISO group S, depending on the chosen geometry and cutting data. Will this insert improve surface finish and reduce tool changes? By promoting secure chip control and a stable cutting edge, the insert supports improved surface quality and can reduce the frequency of tool changes for many applications in stainless steels and superalloys. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Mentions of brand names and trademarks are for explanatory purposes only and do not imply any affiliation.
TCGT06T101-FM2 WSM21 T Wendeplatten - Walter Tools
Reliable chip control and extended edge life result from the combination of the WSM21 coated carbide grade and the FM2 chipbreaker, delivering consistent performance in demanding materials; order the TCGT06T101-FM2 WSM21 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT06T101-FM2 WSM21 – Triangle Indexable Insert (60°), FM2 Chipbreaker, Walter Tools The TCGT06T101-FM2 WSM21 is a triangular indexable insert designed for heavy-duty turning and boring applications, optimised for stainless steel and heat-resistant superalloys where stable chip formation and robust cutting edges are essential Coated carbide grade WSM21 for difficult alloys FM2 chipbreaker for secure chip control Triangle 60° form for stable cutting edges 0.1 mm corner radius and 7° clearance High reliability for demanding alloys and stainless steels The WSM21 grade is a coated carbide developed for machining stainless steel (ISO group M) and heat-resistant superalloys or titanium (ISO group S). Its microstructure and coating combination promote stable chip formation under high temperatures and adhesion-prone conditions, which reduces build-up on the cutting edge and helps to maintain dimensional accuracy over longer batch runs. For production environments where consistent repeatability and predictable edge life matter, this grade offers a balance of wear resistance and toughness that supports economic machining. Secure chip control and prolonged edge life through geometry The insert’s FM2 chipbreaker is engineered to manage chips reliably in tough-to-machine materials, lowering the risk of long, tangled swarf and supporting safe chip evacuation. Combined with a 0.1 mm corner radius, the geometry provides a compromise between strength and finish: the small radius reinforces the cutting edge against mechanical shock while enabling a fine surface quality on the workpiece. These features reduce the frequency of tool changes and help to stabilise cycle times in serial production. Geometry and process security for turning and boring The triangular 60° form gives three usable cutting edges per index and a compact contact geometry that supports stable clamping in standard triangular holders. A 7° clearance angle reduces rubbing and promotes consistent cutting engagement, while the insert’s tolerance class G and thickness T1 support reproducible seating and control in toolholders. This combination of form and specification makes the insert suitable for a range of turning operations where process security and predictable outcomes are required, especially when working with materials prone to work hardening or thermal sensitivity. Contact Metav Werkzeuge for application advice on Walter Tools' WSM21 inserts and fast, reliable supply from our technical team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCGT06T101-FM2-WSM21-WALTER Product name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT06T101-FM2 WSM21 Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.1 mm Insert size: 06 Thickness: T1 Plate form: Triangle 60° Tolerance class: G Materials & features Coating: coated carbide Grade: WSM21 Chipbreaker: FM2 Applicable materials: stainless steel (M), heat-resistant superalloys / titanium (S) Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What materials is this insert suited for? The TCGT06T101-FM2 WSM21 insert is designed primarily for stainless steel and selected heat-resistant superalloys or titanium, taking advantage of the WSM21 coated carbide’s heat and adhesion resistance. How does the FM2 chipbreaker benefit production? The FM2 chipbreaker on this insert promotes controlled chip formation and evacuation, which reduces swarf-related interruptions and supports steady cycle times in serial machining. What does the 0.1 mm corner radius mean for surface finish? A 0.1 mm corner radius strengthens the cutting edge while allowing a finer surface finish than larger radii, offering a compromise between edge robustness and part quality. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting edges per insert, improving economy in applications where edge wear is a factor. Is this insert compatible with standard triangular toolholders? The insert’s triangular geometry and tolerance class G are intended for common triangular holders; compatibility should be verified against holder specifications before assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. The Walter AG (marketed as Walter Tools) is a leading manufacturer of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used for explanation only; there is no affiliation between our company and the named brands.
TCGT06T101-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade (WNN10), precise FN2 chip control, and a compact triangular 60° form for reliable machining performance and process stability; order the TCGT06T101-FN2 WNN10 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT06T101-FN2 WNN10 — Triangle indexable insert with FN2 chipbreaker — Walter Tools The TCGT06T101-FN2 WNN10 is a triangle 60° indexable cutting insert designed for drilling, boring and turning indexable applications where controlled chip formation and consistent edge life are required Coated carbide grade WNN10 FN2 chipbreaker for controlled chips 7° clearance for smooth cutting action Triangular 60° form, size 06 Enhanced process reliability through material and geometry The TCGT06T101-FN2 WNN10 insert combines a coated carbide grade with a defined FN2 chipbreaker to deliver controlled chip formation and predictable wear behaviour. The 7° clearance angle reduces rubbing at the cutting edge, which helps to maintain cutting efficiency and lowers heat generation during deep cuts. Engineers and production planners benefit from the insert’s triangular 60° form, which offers three usable cutting edges and compact geometry for confined toolholders. These technical choices translate into fewer tool changes and more stable cycle times on machining centres and turret lathes. Practical selection and material suitability explained Size and tolerance data simplify integration: the compact size 06 insert with T1 thickness and tolerance class G suits standard clamping systems and repeatable seating in indexable toolholders. The cutting grade WNN10 is a coated carbide; suitability for specific workpiece materials should be verified against the product matrix, as noted in the manufacturer’s series description. This approach ensures the right grade is chosen for the required mix of wear resistance and toughness, supporting efficient machining of a broad range of materials when the correct combination is selected. Productivity gains and consistent edge life Optimised edge geometry and the FN2 chip control reduce the risk of long, stringy chips and promote predictable machining forces. The insert’s form and coating contribute to improved surface finishes and extended tool life under stable cutting conditions, which supports higher productivity and lower tooling costs per component. For shops focused on process security and reproducible results, the combination of compact triangular inserts and a dedicated chipbreaker aids in cycle stabilisation and reduces interruptions for manual chip handling. Contact Metav Werkzeuge for tailored advice on Walter Tools TCGT06T101-FN2 WNN10, request detailed technical data or a quotation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: TCGT06T101-FN2-WNN10-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Nose radius: 0.1 mm Insert form: triangular 60° Size: 06 Thickness: T1 Tolerance class: G Special features Grade: WNN10 (coated carbide) Chipbreaker: FN2 Series: Walter Schneidstoffsorte - Serie offen Designation without grade: TCGT06T101-FN2 ISO designation: TCGT06T101-FN2 WNN10 Material specification: Katalogabhängig Execution: T FAQ What materials is this insert suitable for? The insert’s WNN10 coated carbide grade is intended for a broad application range; suitability for specific workpiece materials should be checked against the manufacturer’s product matrix for the TCGT06T101-FN2 WNN10. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker promotes controlled chip formation and reduces the occurrence of long, stringy chips when the TCGT06T101-FN2 is used in appropriate cutting conditions. Can the triangular form be indexed to use multiple edges? Yes, the triangular 60° form provides three usable cutting edges per insert, enabling efficient edge rotation and economical use of each insert. What is the significance of the 7° clearance angle? A 7° clearance helps to minimise rubbing behind the cutting edge, improving cutting efficiency and reducing heat generation during operation with the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
TCGT06T102-FM2 WSM21 FM2 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade (WSM21), precise triangle 60° geometry, and a dedicated FM2 chipbreaker to achieve stable cutting in stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for selection support. TCGT06T102-FM2 WSM21 — Indexable insert for stainless steel and superalloys by Walter Tools TCGT06T102-FM2 WSM21 is an indexable insert optimised for turning and boring applications in stainless steels and heat‑resistant superalloys Coated carbide grade WSM21 Triangle 60° insert form 0.2 mm corner radius for strength FM2 chipbreaker for reliable chips High‑performance grade for tough materials The WSM21 grade is a coated carbide designed specifically for demanding work on stainless steels and heat‑resistant superalloys. In practice this means improved edge stability under high temperatures and reduced tendency for built‑up edge, which translates into fewer interruptions and more predictable tool life. The result is an insert that supports continuous production processes with reliable performance and consistent component quality. For machining specialists, this yields measurable gains in process stability and less frequent tool changes. Geometry engineered for chip control and surface quality The triangle 60° form and a 0.2 mm corner radius provide a balance between strength and accessibility in profile turning. A 7° clearance angle reduces rubbing and heat transfer at the nose while maintaining cutting engagement. The FM2 chipbreaker is tuned to produce short, controllable chips in tough materials, aiding evacuation and protecting the cutting edge. Thicker substrate designation T1 and tolerance class G ensure repeatable seating in toolholders; in practice this means consistent contact, stable cutting forces and repeatable surface finish across tool life. Practical application advice and integration into machining cells This indexable insert suits operations where heat, toughness and poor thermal conductivity of the workpiece impose heavy demands on tooling. Classified for ISO groups M and S, the insert is appropriate for stainless steels and heat‑resistant superalloys and, depending on geometry, selected grades of titanium. When integrated with appropriate feed and speed adjustments and a compatible toolholder, the insert contributes to efficient material removal while safeguarding component tolerances. The combination of coated carbide and chipbreaker design supports predictable swarf behaviour and easier process control in automated and manual turning or boring cycles. For reliable machining of stainless steel and superalloys with Walter Tools inserts, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCGT06T102-FM2-WSM21-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT06T102-FM2 WSM21 Walter Tools Manufacturer: Walter Tools Product type: Indexable insert for turning/boring Grade: WSM21 Execution: T Facts Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Triangle 60° Insert size: 06 Chipbreaker: FM2 Plate thickness: T1 Tolerance class: G Special features Coated carbide Series: Walter Schneidstoffsorte - Serie offen Suitable for: stainless steels (ISO M) Suitable for: heat‑resistant superalloys/titanium (ISO S) Wendeplatte ISO designation: TCGT06T102-FM2 WSM21 FAQ What materials is this insert suited for? The TCGT06T102-FM2 WSM21 insert is optimised for stainless steels and heat‑resistant superalloys (ISO groups M and S); suitability for specific alloys depends on cutting parameters and insert geometry. How does the FM2 chipbreaker help in production? The FM2 chipbreaker promotes short, controllable chips in tough materials, improving evacuation and reducing the risk of re‑cutting, which enhances surface finish and tool life. What does the 0.2 mm corner radius mean for component finish? A 0.2 mm corner radius provides increased edge strength while still enabling acceptable profile detail; this supports consistent surface quality and reduces sensitivity to minor deflection. Is this insert compatible with standard toolholders? The insert follows standard triangular indexable insert geometry and tolerance class G, ensuring consistent seating in compatible toolholders designed for the 06 size and T1 thickness. Can this insert be used for both turning and boring? Yes — the insert is an indexable design intended for turning and boring operations, provided the holder and cutting parameters are matched to the machining task. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The described item is an original, factory‑new product from Walter Tools.
TCGT06T102-FN2 WNN10 WNN10 Wendeplatten - Walter Tools
Benefit from the combination of cost-effective, stable cutting performance and reliable chip control offered by the WNN10 coated-carbide grade with the FN2 chipbreaker; order the insert directly via Metav Werkzeuge or consult our specialists for process-matching advice. TCGT06T102-FN2 WNN10 triangular 60° turning/boring insert, coated carbide, 7° clearance (Walter Tools) The TCGT06T102-FN2 WNN10 is a coated-carbide triangular turning insert designed for precise metal-removal and predictable chip formation in general turning and boring operations Coated carbide grade WNN10 Triangular 60° insert form 0.2 mm corner radius for fine finishes FN2 chipbreaker for controlled chips 7° clearance angle for reduced cutting forces Consistent productivity through optimised cutting geometry The triangular insert shape with a 60° geometry and a 0.2 mm corner radius provides a balanced combination of strength and surface finish. The coated-carbide WNN10 grade is formulated for stable wear behaviour and broad application where coated cemented carbide is required. Together with the 7° clearance, the design lowers cutting forces and reduces chatter, which helps to maintain cycle times and part tolerances. For production environments this means fewer rejects and more predictable machine utilisation. Predictable chip control and machining reliability The FN2 chipbreaker is engineered to produce short, consistent chips under typical turning conditions. Controlled chip form enhances tool life and reduces interruptions at the machine, contributing to higher effective uptime. The insert’s modest corner radius supports fine finishing steps while retaining edge security during heavier cuts. These features translate into straightforward process set-up and repeatable results for machinists and process engineers seeking reliable performance. Easy integration and versatile application range The insert is supplied in the common format for triangular turning/boring applications and matches familiar clamping systems, simplifying tool changeover and inventory management. The coated grade and chipbreaker combination suit a wide range of workpiece materials where coated cemented carbide inserts are appropriate; however, application boundaries should be validated against the specific product matrix. This pragmatic approach supports efficient tooling decisions and reduces the risk of unnecessary trial machining. Contact Metav Werkzeuge for a recommendation tailored to the machining task or to arrange delivery of the TCGT06T102-FN2 WNN10 inserts via Metav Werkzeuge; technical consultants are available to advise on insert selection and process optimisation Technical Data SKU: TCGT06T102-FN2-WNN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT06T102-FN2 WNN10 Walter Tools Manufacturer: Walter Tools Product type: Turning/boring indexable insert ISO designation: TCGT06T102-FN2 WNN10 Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Tolerance class: G Facts Clearance angle: 7° Corner radius: 0.2 mm Insert form: Triangular 60° Insert size: 06 Chipbreaker: FN2 Thickness: T1 Special features Coated cemented carbide grade WNN10 FN2 chipbreaker for controlled chips Balanced geometry for finishing and light roughing Stable edge and predictable wear behaviour Series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suited for? The TCGT06T102-FN2 WNN10 insert is a coated cemented carbide grade intended for a broad range of turning applications where coated inserts are suitable; material compatibility should be checked against the product matrix for specific alloys. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on this triangular insert promotes short, controllable chips and reduces the risk of long, entangling chips, improving workplace safety and machine uptime when using the TCGT06T102-FN2 WNN10. What does the tolerance class G indicate? Tolerance class G denotes the manufacturing tolerance for the insert dimensions; it ensures repeatable fit in standard clamping systems and consistent positional accuracy during tool changes. Can the 0.2 mm corner radius be used for finishing? Yes. The 0.2 mm corner radius offers a compromise between edge strength and surface finish, making the insert suitable for fine finishing passes as well as light roughing when required. Is the insert compatible with common triangular clamping systems? The insert is produced in a standard triangular 60° format (insert size 06) that fits many established clamping systems; compatibility should be confirmed with the specific toolholder specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT06T104-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the WSM01 grade and the Tiger‑tec Silver series for secure chip formation and extended tool life; the triangular insert with corner radius 0.4 mm and chipbreaker FM2 delivers controlled chips when machining stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or ask our consultants for application recommendations. TCGT06T104-FM2 WSM01 – Triangle 60° insert, chipbreaker FM2 | Walter Tools Tiger‑tec Silver A TCGT06T104-FM2 WSM01 indexable insert for boring and turning, engineered for machining stainless steel and high‑temperature superalloys with reliable edge stability. Tiger‑tec Silver series grade WSM01 Coated carbide for extended tool life Triangular 60° with corner radius 0.4 mm Chipbreaker FM2 for secure chip control Higher productivity with heat‑resistant grade and coating The combination of the WSM01 grade and the Tiger‑tec Silver coating provides a balance between heat resistance and wear performance, which increases process reliability when machining demanding alloys. The coated carbide substrate reduces flank wear and delays edge breakdown, leading to longer tool life and fewer interruptions for index changes. For production environments where consistent part quality and repeatability matter, this means less rework and more uptime. Controlled chips and stable cutting edge for stainless steels The engineered chipbreaker FM2 promotes predictable chip formation even with tough, adhesive materials such as stainless steel and heat‑resistant alloys. A consistent chip shape reduces the risk of entanglement and protects the workpiece surface, improving surface finish and reducing cycle variability. The modest corner radius 0.4 mm enhances edge strength, allowing stable cutting at moderate depths while maintaining dimensional accuracy. Practical geometry that reduces tooling costs The 60° triangular form offers three usable cutting corners per insert, which translates into economical edge utilisation and straightforward indexing during service life. The insert thickness T1 and the defined relief angle 7° balance rigidity and clearance to help control cutting forces and minimise vibrations on typical turning and boring machines. Fewer insert changes and predictable performance contribute directly to reduced tooling expenditure and smoother production planning. Designed for dependable production results Built by Walter Tools within the Tiger‑tec Silver family, the insert is intended for repetitive, high‑duty tasks where process stability is essential. Its features support efficient machining of heat‑resistant superalloys and tougher stainless grades, enabling fewer process adjustments and a stable manufacturing rhythm. When combined with suitable cutting parameters and machine stability, the insert helps to maintain throughput without compromising surface quality. For tailored recommendations on applying the Walter Tools Tiger‑tec Silver insert for specific stainless steel or superalloy jobs, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical consultants provide application‑focused guidance and delivery options. Technical Data Article number: TCGT06T104-FM2-WSM01-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT06T104-FM2 WSM01 Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Data Relief angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Insert size: 06 Chipbreaker: FM2 Thickness: T1 Tolerance class: G Special features Coated carbide Suitable for stainless steel (M) Suitable for heat‑resistant superalloys and titanium (S) Indexable triangular insert, three usable cutting edges Application: boring and turning FAQ What materials is this insert suitable for? The WSM01 grade in the TCGT06T104-FM2 WSM01 insert is formulated for stainless steel and heat‑resistant superalloys, offering thermal stability and improved chip control for these groups. How does the FM2 chipbreaker improve machining? The chipbreaker FM2 is designed to produce short, controllable chips with sticky or tough materials; in combination with the Tiger‑tec Silver coating, it helps maintain a stable cutting edge and consistent surface finish. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting edges, allowing economical edge rotation and extended service life before replacement. Is the insert coated and how does that help? Yes, the insert is coated carbide; the coating improves wear resistance and heat management, which reduces flank wear and supports longer continuous cutting periods. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
TCGT06T104-FM2 WSM21 FM2 Wendeplatten - Walter Tools
Take advantage of the combination of WSM21 coated carbide, the FM2 chipbreaker and a 0.4 mm corner radius for stable chip formation and consistent tool life; order directly via Metav Werkzeuge or consult our technical team for application advice. TCGT06T104-FM2 WSM21 turning / boring indexable insert, triangle 60° The TCGT06T104-FM2 WSM21 is a triangular 60° indexable insert designed for turning and boring applications in stainless steels and heat‑resistant alloys, delivering controlled chip formation and high process reliability. Triangle 60° insert for versatile turning WSM21 coated carbide for stainless steels FM2 chipbreaker for controlled chip formation 0.4 mm corner radius and 7° relief Stable cutting performance for difficult‑to‑machine alloys The WSM21 grade is a coated carbide formulation engineered for challenging materials. Its composition supports secure chip formation when machining stainless steels and heat‑resistant superalloys (ISO groups M and S), reducing the risk of built‑up edge and premature flank wear. Combined with the FM2 chipbreaker, this geometry promotes short, controllable chips that clear the cutting zone reliably, which improves uptime and makes process parameters easier to maintain. The result is fewer interrupted cycles and more consistent component quality. Geometry that balances strength and surface finish A triangular 60° form and a 0.4 mm corner radius provide a robust cutting edge that withstands intermittent cuts while still enabling an acceptable surface quality on the workpiece. The modest 7° relief angle reduces rubbing on the flank and lowers cutting forces, which helps preserve the edge and reduces vibration in many setups. The insert’s T1 thickness and tolerance class G ensure repeatable seating in toolholders and predictable performance across batches, supporting tight production tolerances and reproducible results. Production benefits: predictable tool life and process security Using an insert with WSM21 and an FM2 chip control geometry leads to measurable process advantages: stable cutting edges lengthen effective tool life and lower the frequency of index changes, while improved chip control reduces cycle interruptions and machine stoppages. For operations that demand steady throughput and reliable component quality, this insert supports efficient machining strategies and easier parameter optimisation. Its suitability for stainless steels and heat‑resistant alloys makes it a practical choice for workshops handling mixed production runs. For technical advice or to request delivery of Walter Tools inserts based on the WSM21 grade, contact Metav Werkzeuge for application support and fast supply coordination. Technical data Article number: TCGT06T104-FM2-WSM21-WALTER Item designation: TCGT06T104-FM2 Grade / sort: WSM21 Series: Walter Schneidstoffsorte - Serie offen Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Relief angle: 7° Insert shape: Triangle 60° Insert size: 06 Thickness: T1 Tolerance class: G Material designation: S / M Special features Coated carbide grade WSM21 Chipbreaker: FM2 Designed for stainless steels (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) FAQ What materials is this insert suitable for? The TCGT06T104-FM2 WSM21 insert is intended for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), thanks to the WSM21 coated carbide and FM2 chipbreaker. How does the FM2 chipbreaker improve productivity? The FM2 chipbreaker on the TCGT06T104-FM2 promotes short, controlled chips and reduces the likelihood of chip entanglement, which helps to keep cycles running and decreases the need for manual intervention. What are the key geometry advantages for finishing and roughing? The triangular 60° shape with a 0.4 mm corner radius offers a compromise between edge strength for roughing and the ability to achieve a consistent surface finish during finishing passes. Manufacturer: Walter Tools; Headquarters: Tübingen; part of the Sandvik Group Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT06T104-FN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, reliable FN2 chip control and the WN10 uncoated carbide grade to keep turning and boring processes consistent and productive; order the insert via Metav Werkzeuge or consult the advisers for grade selection. TCGT06T104-FN2 WN10 — Turning / Boring indexable insert, triangular 60°, 0.4 mm nose radius (Walter Tools) TCGT06T104-FN2 WN10 is an indexable insert designed for turning and boring operations where repeatable geometry and stable chip formation are priorities Triangular 60° geometry for rigid setup Fine 0.4 mm nose radius for precision FN2 chipbreaker for stable chip control Uncoated carbide WN10 for general-purpose cutting Greater process reliability through optimised geometry The triangular 60° shape combined with a 0.4 mm nose radius and a 7° relief angle provides a compact cutting edge that reduces deflection and contributes to consistent surface finish in interrupted and continuous cuts. The small nose radius enables tighter tolerances on turned features while the geometry supports higher axial engagement without sacrificing stability. For production contexts this means fewer adjustments at the machine and improved first-pass acceptance rates. Consistent chip control and predictable performance The integrated FN2 chipbreaker is designed to generate controllable chips across a broad range of cutting conditions; paired with the WN10 uncoated carbide grade this yields predictable wear behaviour and straightforward regrinding cycles. The uncoated grade is a solid choice for general turning tasks where coating benefits are not required, while the documented performance should be checked against the product matrix for specific workpiece materials. This combination supports steady cycle times and helps to avoid unexpected downtime caused by poor chip evacuation. Efficient integration into standard tool systems ISO designation and standardised form factor simplify insert handling and changeovers: the insert size 06 and thickness T1 fit common toolholder families for the TCGT style, enabling quick replacement and consistent tool set-up across machines. The tolerance class G aids repeatability in clamping and positioning, reducing the need for additional adjustment. Thanks to this standardisation, workplaces benefit from reduced tooling complexity and easier inventory management, which contributes to overall cost-efficiency in routine turning operations. Practical handling, application scope and selection guidance The insert is supplied as an uncoated cemented carbide grade from the Walter Tools open series and features the FN2 chipbreaker for broad application coverage. While the insert is suitable for many turning and boring tasks, the exact material suitability should be verified using the manufacturer's product matrix to match grade and geometry to the workpiece. Where unfamiliar materials or high-speed requirements are involved, choosing the correct grade variant ensures longer tool life and stable results. For application-specific advice or to request the Walter Tools TCGT06T104-FN2 WN10 insert from Metav Werkzeuge, contact Metav Werkzeuge for grade selection and delivery details — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: TCGT06T104-FN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT06T104-FN2 WN10 Walter Tools Core data Relief angle: 7° Nose radius: 0.4 mm Insert shape: Triangle 60° Insert size: 06 Thickness: T1 Tolerance class: G Designs and special features Grade: WN10 (uncoated carbide) Chipbreaker: FN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ Which operations is this insert intended for? The insert is designed for turning and boring applications; the designation indicates suitability for both standard turning and small-diameter boring when used in compatible toolholders. Is the WN10 grade coated or uncoated? WN10 is supplied as an uncoated carbide grade intended for general-purpose cutting; coating status is uncoated as defined in the product series. What does the FN2 chipbreaker provide? The FN2 chipbreaker promotes stable chip formation and evacuation under a range of cutting parameters, supporting reliable cycle times and reduced risk of chip-related interruptions. How precise is the cutting edge and what nose radius is provided? The insert features a 0.4 mm nose radius, which supports fine detail turning and improved surface finish when matched to appropriate feed rates. How should material suitability be verified? Material compatibility for the WN10 grade should be checked against the manufacturer's product matrix to ensure the chosen grade aligns with the workpiece material and cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; no affiliation between Metav Werkzeuge and the named brands is implied. The offered article is original, factory-new merchandise of the named manufacturer.
TCGT06T104-FN2 WNN10 Wendeplatten - Walter Tools
Combining the WNN10 coated carbide grade with a defined FN2 chipbreaker and a triangular 60° geometry delivers stable chip control and predictable cutting behaviour; ideal where process stability and repeatable surface quality are required. Order or request application guidance via Metav Werkzeuge for integration support. TCGT06T104-FN2 WNN10 — Turning and boring indexable insert, Walter Tools A TCGT06T104-FN2 WNN10 indexable insert engineered for turning and boring operations, offering a triangular 60° form and a FN2 chipbreaker for controlled chip formation and consistent cutting performance Coated carbide grade WNN10 FN2 chipbreaker for reliable chip control Triangular 60° form for versatile use Corner radius 0.4 mm for finer surface finish Consistent cutting performance through material design The coated carbide grade WNN10 provides a balanced combination of wear resistance and toughness that supports stable cutting across varied production tasks; its coating reduces edge wear and extends usable life compared with uncoated grades. The incorporated FN2 chipbreaker promotes predictable chip segmentation, which reduces the risk of chip-related interruptions and simplifies chip evacuation. Suitability for specific workpiece materials must be determined using the product matrix, ensuring the selected grade and geometry match the machining task and cycle times. This technical alignment reduces unexpected tool changes and helps maintain steady productivity. Precision geometry for repeatable surface quality The triangular 60° plate form and the corner radius 0.4 mm are designed to produce consistent surface results while offering multiple indexing positions for economical use. The insert's relief angle 7° and plate thickness T1 contribute to a robust cutting edge that copes with varying cutting forces without compromising dimensional repeatability. With a tolerance class G, the component meets industrial expectations for interchangeability, enabling straightforward replacement in indexed toolholders and minimal setup deviation. These geometric choices support reliable part finish with controlled cutting forces. Practical integration and shop-floor advantages This insert's compact plate size 06 and execution T simplify inventory management and enable flexible tool assembly for common turning and boring setups. The combination of a coated substrate, chip control via FN2, and a stable insert geometry reduces unplanned downtime and supports a predictable maintenance cycle. For production planners, these characteristics translate into higher machine uptime and easier tool-life forecasting. For specialised machining tasks or unfamiliar material pairings, consultation with Metav Werkzeuge is recommended to ensure optimal cutting data and holder compatibility. For tailored application advice and procurement support for the Walter Tools TCGT06T104-FN2 WNN10, contact Metav Werkzeuge to confirm suitability and to obtain customised recommendations for integration into existing tool systems. Technical Data Article number: TCGT06T104-FN2-WNN10-WALTER ISO designation: TCGT06T104-FN2 WNN10 Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Execution: T Coating: Katalogabhängig Grade: WNN10 Series: Walter Schneidstoffsorte - Serie offen Tolerance class: G Facts Relief angle: 7° Corner radius: 0.4 mm Plate form: Triangle 60° Plate size: 06 Plate thickness: T1 Special features Chipbreaker: FN2 Coated hard metal (coated carbide) Series description: WNN10 is a Walter grade; check product matrix for material suitability Base designation: TCGT06T104-FN2 FAQ What types of machining is this insert intended for? The TCGT06T104-FN2 WNN10 insert is intended for turning and boring applications where a triangular 60° geometry and controlled chip formation support consistent cutting. How does the FN2 chipbreaker influence performance? The FN2 chipbreaker on this Walter Tools insert promotes secure chip segmentation, improving chip control and reducing interruptions during both turning and light boring operations. Which materials can be machined with this grade? Material suitability depends on the specific product matrix; the WNN10 coated carbide grade should be checked against the provided matrix to confirm compatibility with the intended workpiece material. How should the insert be indexed to maximise life? Index the triangular plate according to the toolholder instructions to use all cutting edges; the combination of the 0.4 mm corner radius and the coating helps preserve edge life when correct feeds and speeds are applied. Is the geometry compatible with common toolholders? The plate form and size (triangle 60°, size 06) are standardised for many indexable toolholders, but verification against the holder's specifications is recommended for precise fit and clamp geometry. The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TCGT06T104M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of cermet grade WEP10C, an FP2 chipbreaker and the 60° triangular form for consistent cutting performance and reliable surface quality; order directly via Metav Werkzeuge or consult our specialists for application advice. TCGT06T104M-FP2 WEP10C – Triangle 60° cermet turning/boring insert by Walter Tools, FP2 chipbreaker, 7° relief TCGT06T104M-FP2 WEP10C is a cermet turning and boring insert designed for productive finishing operations in the Walter Cermet series. Cermet grade WEP10C for long tool life FP2 chipbreaker for stable chip control Triangle 60° insert, 0.4 mm corner radius 7° clearance for secure cutting geometry Consistent finishing performance with cermet precision The Walter Cermet grade offers a cermet cutting material that promotes an excellent balance between wear resistance and edge stability. The triangular geometry combined with a 0.4 mm edge radius supports fine finishing cuts while maintaining dimensional accuracy. This design reduces tool chatter and preserves the cutting edge, which translates into fewer insert changes and a more predictable production rhythm. The FP2 chipbreaker contributes to controlled chip formation during light to medium cuts, improving process repeatability in serial production. Better surface quality and efficient chip control The insert’s FP2 chipbreaker forms short, consistent chips that are easier to evacuate from the cut zone, reducing the risk of workpiece surface damage and machine downtime. The 7° relief angle establishes a secure cutting geometry that reduces rubbing and heat build-up at the flank, leading to improved surface finish and longer tool life. For manufacturers focused on reproducible surface integrity and low scrap rates, this geometry supports higher first-pass yield and tighter tolerance adherence. Application guidance and compatibility with machining strategies This triangular insert suits applications where reliable finishing and stable edge behaviour are required. The TCGT06T104M-FP2 WEP10C belongs to the Walter Cermet series and is catalogue-dependent for some material options; users should verify the product matrix for specific workpiece materials. The insert’s compact size and thin configuration (T1) make it appropriate for machines and holders requiring small approach clearances. Where higher removal rates are needed, the insert can be integrated into multi-insert toolheads to combine finish-grade inserts with roughing geometries. Contact Metav Werkzeuge to discuss suitability, inventory and application-specific recommendations for Walter Tools cermet inserts and to arrange sample testing or batch supply Technical data Article number: TCGT06T104M-FP2-WEP10C-WALTER Designation: TCGT06T104M-FP2 WEP10C Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter Cermet Grade: WEP10C Execution: T Tolerance class: G Data Relief angle: 7° Edge radius: 0.4 mm Insert form: Triangle 60° Insert size: 06 Chipbreaker: FP2 Thickness: T1 Special features Cermet cutting material Catalogue-dependent material options Suitable for finishing and light-medium cuts Series and grade description: Walter Cermet, WEP10C Application note: Verify workpiece suitability in product matrix FAQ What materials is this insert designed for? The cermet grade WEP10C in the TCGT06T104M-FP2 WEP10C insert is intended for finishing applications; consult the Walter Cermet product matrix to confirm suitability for specific materials. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker on this Walter Tools insert produces controlled, short chips that improve chip evacuation and surface quality during finishing operations. Can this insert be used for both turning and boring? Yes, the geometry and execution of the TCGT06T104M-FP2 make it suitable for turning and light boring tasks where finish quality and repeatability are priorities. What are the key dimensional details to consider for tooling holders? Important dimensions include the triangle 60° form, insert size 06 and thickness T1; verify holder compatibility with these parameters before assembly. Is the edge radius of 0.4 mm suitable for fine finishes? An edge radius of 0.4 mm is optimised for fine finishing, offering a balance between strength and the ability to produce a smooth surface. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT090202-FM2 WSM20S FM2 Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WSM20S grade delivers stable cutting edges and extended tool life when machining tough materials; together with the triangular 60° form and 0.2 mm corner radius this ensures consistent surface quality and predictable productivity. Order the insert directly via Metav Werkzeuge or ask the consultants for technical advice. TCGT090202-FM2 WSM20S – Triangle 60° turning insert with Tiger·tec Silver coating by Walter Tools TCGT090202-FM2 WSM20S is a triangular indexable turning insert designed for demanding applications in rostfreier Stahl and heat‑resistant alloys Tiger·tec Silver coating for edge stability Grade WSM20S for rostfreier Stahl and superalloys 7° clearance angle for secure cutting action 0.2 mm corner radius for controlled surface finish Consistent performance on challenging materials The Tiger·tec Silver technology combined with the WSM20S cemented carbide class provides enhanced wear resistance and reliable edge retention when machining rostfreier Stahl and heat‑resistant superalloys. This composition supports a controlled chip formation process, reducing the risk of built‑up edge and thermal damage during interrupted cuts. For production environments where process stability matters, the insert’s coating and grade help maintain cutting performance over longer cycles, which contributes to fewer tool changes and improved throughput. The design is intended for operators seeking reproducible results on difficult‑to‑machine materials without complex parameter adjustments. Geometry engineered for finishing and repeatability The triangular 60° plate form and 0.2 mm corner radius combine to offer a balance between durability and surface quality. A smaller corner radius reduces cutting forces and aids in achieving fine surface finishes, while the triangle shape provides three indexed cutting edges per insert for economical use. The FM2 chipbreaker supports consistent chip control across a range of feeds, and the 7° clearance (free) angle minimises rubbing on the flank face, reducing heat transfer into the cutting edge. These geometric traits make the insert suitable for light to medium finishing passes where edge stability and dimensional repeatability are priorities. Productivity benefits and process security in practice Integrating this insert into a production line contributes to predictable tool life and lower variability between components, thanks to the coated carbide grade and robust edge design. The combination of Tiger·tec Silver treatment and the WSM20S sort reduces flank wear and improves cutting edge robustness, supporting longer uninterrupted machining sequences. For shops focused on delivering consistent part quality, the insert’s attributes translate into fewer re‑setups and steady cycle times. If clarification on compatibility with specific machine types or cutting parameters is required, technical consultants at Metav Werkzeuge can provide tailored recommendations based on the machining task. For precise application support or to request delivery of Walter Tools TCGT090202-FM2 WSM20S inserts, contact Metav Werkzeuge for immediate assistance and local availability Technical data Article number: TCGT090202-FM2-WSM20S-WALTER Data Free angle: 7° Corner radius: 0.2 mm Plate form: Triangle 60° Plate size: 09 Plate thickness: 02 Special features Tiger·tec Silver coating Grade: WSM20S (coated carbide) Chipbreaker: FM2 Series: Tiger‑tec Silver Application: rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert suitable for? The TCGT090202-FM2 WSM20S insert from Walter Tools is designed for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S) as indicated by its WSM20S grade and Tiger·tec Silver coating. How does the chipbreaker influence machining? The FM2 chipbreaker on the TCGT090202-FM2 helps promote consistent chip formation and evacuation, which supports stable cutting conditions and improved surface finish in finishing operations. How many usable cutting edges does the triangular insert offer? With its 60° triangle form, the insert provides three indexed cutting edges, enabling economical edge use and straightforward re‑indexing for continued operation. Is the insert intended for roughing or finishing passes? The geometry, including the 0.2 mm corner radius and the 7° clearance angle, makes this insert well suited for finishing to light‑medium finishing passes where surface quality and repeatability are required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
TCGT090202-FN2 WNN10 Wendeplatten - Walter Tools
A coated-carbide triangular insert with a 0.2 mm corner radius and FN2 chipbreaker delivers stable chip control and predictable edge life; benefit from consistent machining results, simplified insert changes and improved process security — order the TCGT090202-FN2 WNN10 directly via Metav Werkzeuge or consult the sales engineers for selection support. TCGT090202-FN2 WNN10 – Triangular 60° Turning/Boring Insert by Walter Tools, 7° Relief, 0.2 mm Radius The TCGT090202-FN2 WNN10 is a triangular indexable insert intended for turning and boring applications, engineered to provide controlled chip formation and repeatable edge performance in production environments. Coated carbide grade WNN10 Triangular 60° geometry 0.2 mm corner radius for fine finishing FN2 chipbreaker for controlled chips Stable cutting performance that protects cycle times The insert's coated carbide grade WNN10 is formulated as a general-purpose, coated hardmetal option that emphasises reliable wear resistance and consistent cutting behaviour. The combination of the coating and substrate aims to deliver stable chip formation, which reduces unexpected interruptions in automated cycles and helps maintain spindle productivity. The presence of a dedicated chipbreaker FN2 improves evacuative behaviour for a range of cutting depths and feeds; this means fewer manual interventions and a reduced risk of edge damage during interrupted cuts. In practice, the result is more predictable tool life and a steadier production flow. Geometry designed for accuracy and surface quality The triangular 60° shape, together with a 7° relief angle, provides a balance between edge strength and access into tight profiles. The small corner radius 0.2 mm enables improved surface finish on light finishing passes while still retaining sufficient edge robustness for general turning and boring tasks. The geometry aids in achieving repeatable tolerances without unnecessary overcutting; a smaller radius supports finer finishes, whereas the 60° form provides multiple indexed cutting edges for economical use. Replacement and indexing are straightforward, reducing machine downtime and speeding up tool change procedures. Application advice and selection guidance The insert belongs to the Walter Schneidstoffsorte – Serie offen and is identified as TCGT090202-FN2 WNN10, with material assignment listed as catalogue-dependent; therefore material suitability must be checked against the manufacturer's product matrix. The execution T, tolerance class G and plate dimensions (plate size 09, thickness 02) define the mechanical fit and interchangeability within matching toolholders. For customers seeking process optimisation, the insert supports strategies that prioritise consistent chip control and reproducible edge life rather than aggressive finishing at single-pass maximum metal removal. For detailed application matrices or to confirm suitability for a specific material and cutting parameter set, contact Metav Werkzeuge for customised advice. For application-specific selection of Walter Tools inserts such as the TCGT090202-FN2 WNN10, contact Metav Werkzeuge for tailored recommendations and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCGT090202-FN2-WNN10-WALTER Designation: TCGT090202-FN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Plate form: Triangular 60° Plate size: 09 Plate thickness: 02 Tolerance class: G Special features Chipbreaker: FN2 Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Material: Katalogabhängig FAQ What cutting tasks is this insert intended for? The TCGT090202-FN2 WNN10 is intended for turning and boring operations where reproducible chip control and predictable edge life are priorities. How does the FN2 chipbreaker influence operation? The FN2 chipbreaker promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of recut or chip-related interruptions during machining. What does the 0.2 mm corner radius mean for surface finish? A corner radius of 0.2 mm supports finer surface finishes on light finishing passes while maintaining sufficient edge strength for common turning tasks. Is the grade WNN10 suitable for all materials? The WNN10 grade is a coated hardmetal option; material compatibility should be verified against the manufacturer's product matrix for precise recommendations. Which toolholders are compatible with this insert geometry? Toolholders designed for triangular 60° inserts with plate size 09 and plate thickness 02 will be mechanically compatible; check holder specifications for matching seat and clamping features. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for clarification; there is no affiliation between our company and the brands cited. The offered item is original, brand-new merchandise supplied by the manufacturer.
TCGT090204-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a dedicated FM2 chipbreaker to secure stable cutting performance in rostfreiem Stahl and heat-resistant superalloys; the result is longer tool life and consistent surface quality. Order the insert via Metav Werkzeuge or request application advice from the technical team for process-specific recommendations. TCGT090204-FM2 WSM20S – Turning and boring indexable insert, Tiger·tec Silver (Walter Tools) The TCGT090204-FM2 WSM20S is a triangular, coated carbide insert designed for turning and boring operations, optimised for machining rostfreiem Stahl and high-temperature alloys with reliable chip formation and enhanced edge stability. Tiger·tec Silver coating for long tool life Optimised for rostfreiem Stahl and superalloys 60° triangle shape with 0.4 mm corner radius FM2 chipbreaker for controlled chip formation Improved process stability for demanding materials The combination of a coated carbide substrate with Tiger·tec Silver technology offers measurable benefits when machining tough materials. The coating increases thermal resistance and wear protection, while the WSM20S grade promotes a stable cutting edge under elevated temperatures. For workshops aiming to reduce unplanned downtimes, this results in fewer insert changes and a predictable tool life, which in turn supports leaner process planning and reduced overall machining costs. Reliable chip control that supports productivity A focused geometry and the FM2 chipbreaker ensure defined chip formation even in long-chipping alloys. The triangular 60° form and 0.4 mm corner radius provide multiple effective cutting edges per insert, extending service intervals. Controlled chips reduce the risk of rework and machine stoppages, so cycle times remain consistent and throughput improves. The result is efficient swarf management and a safer production environment. Geometry and clearance that simplify setup With a 7° clearance angle and a compact plate thickness, the insert suits a variety of toolholders and boring bars without complex adjustments. The standardised TCGT090204-FM2 geometry simplifies tool inventory and setup routines, enabling rapid tool changes and repeatable positioning. Precision in locating and clamping the insert supports consistent part quality across batches, which benefits both small-series and larger production runs. Material compatibility and application guidance The grade is specified for the ISO groups M and S, meaning suitability for rostfreiem Stahl and heat-resistant superalloys or titanium alloys where cutting temperatures are high and edge stability is critical. The coated composition of WSM20S balances toughness and thermal resistance to avoid edge build-up and premature flank wear. For specific cutting data or when machining novel alloys, consult the technical documentation or request tailored recommendations to match feed and speed to the component requirements. Contact Metav Werkzeuge for tailored tooling advice and material-specific recommendations—Metav Werkzeuge’s technical team is available at info@metav-werkzeuge.com or +49 2822 7131930 to support selection and process optimisation. Technical Data Article number: TCGT090204-FM2-WSM20S-WALTER Designation: TCGT090204-FM2 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Silver Facts Shape: Dreieck 60° Corner radius: 0.4 mm Clearance angle: 7° Size: 09 Thickness: 02 Tolerance class: G Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM2 Material suitability: S / M Intended application: Turning and boring operations on rostfreiem Stahl and heat-resistant alloys FAQ What materials is this insert suitable for? The insert is specified for ISO groups M and S; the WSM20S grade and Tiger·tec Silver coating make it suitable for rostfreiem Stahl and heat-resistant superalloys or titanium alloys. How does the FM2 chipbreaker improve machining? The FM2 chipbreaker controls chip formation for consistent evacuation and reduced rework; in combination with the insert geometry it supports stable cutting on challenging materials. How many cutting edges does the triangular insert provide? The triangular 60° form supplies multiple usable cutting edges per insert, extending service intervals and improving cost-efficiency in production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The item offered is an original, brand‑new product from Walter Tools.
TCGT090204-FN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of a robust WN10 uncoated carbide grade, a triangular 60° insert form and the FN2 chipbreaker for improved chip control and reliable cutting performance; order the part directly via Metav Werkzeuge or consult our specialists for material-matrix verification. TCGT090204-FN2 WN10 Turning Indexable Insert – Triangular 60°, FN2 Chipbreaker by Walter Tools The TCGT090204-FN2 WN10 is a versatile turning and boring indexable insert designed for productive metalcutting operations where stable chip formation and consistent performance are required Uncoated carbide grade WN10 Triangular 60° insert form 0.4 mm nose radius for versatility 7° clearance angle for reduced rubbing Consistent cutting with an economical uncoated grade The insert uses the WN10 uncoated carbide grade, which is intended to deliver stable chip formation and predictable wear behaviour in many workshop scenarios. By choosing an uncoated material, procurement benefits from cost-effective tool blanks that suit a variety of finishing and medium-turning tasks. For safe process planning, the material compatibility should be checked against the product matrix to ensure the grade meets specific workpiece demands and machining conditions. Geometry engineered for productivity and chip control The triangular 60° form provides multiple indexing edges, supporting quick re‑use of spare cutting corners to keep cycles moving. A 0.4 mm nose radius balances edge strength with surface finish capability, while the 7° clearance angle reduces flank rubbing and heat build-up at the cutting edge. Combined with the FN2 chipbreaker, the insert improves chip control in interrupted cuts and standard turning operations, which helps maintain machine uptime and reduces secondary handling of chips. Practical fit for series production and flexible tool systems Designed for integration in compatible toolholders, the insert supports repeatable set-up and efficient edge changes in production environments. The simple geometry and uncoated substrate make the part especially suitable where predictable wear and easy disposal of worn inserts are part of the process strategy. For manufacturers seeking repeatable results, the design supports consistent dimensional outcomes and straightforward replenishment, while Walter Tools engineering ensures the insert aligns with established turning workflows. Contact Metav Werkzeuge for tailored selection guidance on the Walter Tools TCGT090204-FN2 WN10 insert and to confirm suitability for specific materials – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCGT090204-FN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCGT090204-FN2 WN10 Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: 2.0 mm Special features Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 (uncoated carbide) Chipbreaker: FN2 Plate form: Dreieck 60° Designation: TCGT090204-FN2 ISO designation: TCGT090204-FN2 WN10 Tolerance class: G Execution: T Material specification: Katalogabhängig FAQ What materials is the TCGT090204-FN2 WN10 suitable for? The WN10 grade is an uncoated carbide intended for a broad range of applications; however, suitability for specific materials should be confirmed using the product matrix and machining data. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker improves chip control in typical turning and boring operations, reducing the risk of long, tangled chips and aiding reliable automatic chip evacuation. How many cutting edges are available per insert? The triangular 60° form provides three indexable cutting edges per insert, enabling quick rotation to a fresh edge and efficient spare-part usage. Is the insert compatible with standard turning holders? The insert is designed for insertion into compatible turning and boring toolholders; confirm holder compatibility and clamping specifications before assembly. What is the advantage of the 0.4 mm corner radius? A 0.4 mm corner radius gives a balance between edge strength and surface finish capability, making the insert suitable for versatile finishing and medium-accuracy turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
TCGT090204-FN2 WNN10 FN2 Wendeplatten - Walter Tools
Taking advantage of a WNN10 coated carbide grade together with the FN2 chipbreaker delivers reliable chip control and consistent tool life for productive turning and boring operations; order the insert via Metav Werkzeuge or request application guidance from the sales team. TCGT090204-FN2 WNN10 — Triangular indexable insert T, coated carbide, FN2 chipbreaker — Walter Tools The TCGT090204-FN2 WNN10 is a triangular turning and boring indexable insert designed for general metalcutting applications, featuring a controlled-chip FN2 geometry and a compact corner radius for stable finishing. Walter WNN10 coated carbide grade FN2 chipbreaker for consistent chip control 0.4 mm corner radius for improved edge life Triangular 60° shape, tolerance class G Maximise productivity with consistent chip control The combination of a coated carbide grade and the FN2 chipbreaker is engineered to maintain stable chip formation under a range of cutting conditions. This results in reduced interruptions, fewer built-up edges and a predictable machining rhythm, which increases effective cutting time per tool. For production environments where cycle time and repeatability matter, the insert’s designed chip control supports steady material removal rates while helping to protect the cutting edge from irregular loading. The focus here is on delivering measurable efficiency gains through improved process stability. Improve surface finish and tool life through optimised geometry The insert’s 0.4 mm corner radius and 7° relief angle are balanced to provide a compromise between robustness and finesse: the radius supports durability at interrupted cuts, while the relief angle reduces rubbing and heat generation at the cutting zone. The triangular 60° geometry offers three cutting edges per insert, extending service life and lowering indexing frequency. Together these geometrical choices help produce a consistent surface finish and extend the interval between tool changes, translating into lower downtime and better component quality. Broad applicability and clear selection guidance Belonging to the Walter Tools series and specified as WNN10, the insert is a coated carbide grade suited to a wide range of turning tasks; exact workpiece compatibility should be confirmed against the product matrix for optimum results. The insert’s tolerance class G and compact thickness ensure reliable seating in standard toolholders for turning and boring, while the FN2 chipbreaker facilitates controlled swarf evacuation across varied materials. For batch production or job-shop environments seeking a dependable indexable solution, this insert provides a pragmatic balance of durability and process security. Contact Metav Werkzeuge for tailored application advice and to source the Walter Tools TCGT090204-FN2 WNN10 indexable insert for immediate procurement Technical data SKU: TCGT090204-FN2-WNN10-WALTER Designation: TCGT090204-FN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Plate form: Triangular 60° Plate size: 09 Thickness: 02 Chipbreaker: FN2 Tolerance class: G Special features Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 (coated carbide) Execution: T Material specification: Katalogabhängig Notes: Check workpiece suitability in the product matrix FAQ What materials is this insert suitable for? The TCGT090204-FN2 WNN10 insert is a WNN10 coated carbide grade; specific material suitability must be verified in the product matrix for the insert to ensure optimal cutting parameters. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on this turning insert provides predictable chip formation and evacuation, improving process stability and reducing the likelihood of chip-related interruptions during turning and boring. Is the insert compatible with standard triangular toolholders? Yes, the triangular 60° form and the specified thickness are intended for use in standard triangular indexable toolholders; adherence to the toolholder manufacturer’s seating and clamping specifications is recommended. What benefits does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength and surface finish, supporting improved life at semi-roughing and finishing passes while helping to prevent premature chipping under moderate interruption. Does the tolerance class G affect interchangeability? Tolerance class G indicates a defined manufacturing tolerance for the insert; it ensures consistent seating and repeatable positioning when used in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used for explanatory purposes only and do not indicate any affiliation with our company. The offered item is original, factory-new merchandise from Walter Tools.
TCGT090204-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
High-performance turning insert with a wear-resistant coating and precise geometry for demanding stainless steel and superalloy applications; combines long tool life and stable chip control for uninterrupted production. Order directly via Metav Werkzeuge or request application guidance from our technical consultants. TCGT090204-MM4 WSM20S triangle turning insert, Tiger·tec Silver – Walter Tools A TCGT090204-MM4 WSM20S triangle indexable insert engineered for turning operations in stainless steel and heat‑resistant alloys, offering robust edge stability and consistent chip formation Tiger·tec Silver coating, high wear resistance Suitable for stainless steels and superalloys Triangle 60° form with 0.4 mm corner radius Durable cutting performance for demanding materials The combination of the WSM20S grade and the Tiger·tec Silver coating delivers notably improved resistance to abrasive and thermal wear during continuous turning. Designed for machining tough materials, the insert supports stable chip formation and longer cutting intervals, which reduces tool change frequency and increases process uptime. The coated carbide substrate balances toughness and hardness to resist chipping under interrupted cuts, making it suitable for extended production runs on stainless steel and high‑temperature alloys. Geometry that ensures repeatable accuracy The triangular 60° shape with a 0.4 mm corner radius and a 7° free cutting angle provides a reliable compromise between strength and cutting edge sharpness. This geometry supports consistent dimensional control and repeatable part quality while offering a defined cutting edge for finishing and semi‑finishing passes. The MM4 chipbreaker is optimised to shape chips reliably, lowering the risk of built‑up edge and improving surface finish without sacrificing mechanical stability. Practical application guidance for process reliability Assigned to ISO groups M and S, the insert is intended primarily for stainless steel and heat‑resistant superalloys, including titanium alloys. For best results, combine appropriate feed and speed settings with adequate cooling strategies; the coated grade tolerates elevated temperatures but benefits from controlled cutting parameters to maximise life. The insert’s design supports both continuous and slightly interrupted cuts, making it versatile for shopfloor turning tasks where both efficiency and component quality are required. Why choose this Walter Tools grade in production Specified with tolerance class G and a compact form factor, the insert contributes to predictable tool performance and easier process planning. The coded dimensions facilitate quick tool library input and toolholder selection. As a product from Walter Tools, the insert is backed by manufacturing expertise aimed at consistent tool life and predictable wear behaviour—factors that help reduce scrap rates and improve overall machining economics. Contact Metav Werkzeuge for tailored application advice and to source genuine Walter Tools Tiger·tec Silver inserts for high‑duty stainless steel turning: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: TCGT090204-MM4-WSM20S-WALTER Designation: TCGT090204-MM4 WSM20S Type: Turning indexable insert (triangle) Brand: Walter Tools Series: Tiger·tec Silver Facts Free cutting angle: 7° Corner radius: 0.4 mm Form: Triangle 60° Size code: 09 Thickness code: 02 Tolerance class: G Special features Grade: WSM20S (coated carbide) Chipbreaker: MM4 Execution: T Material designation: S / M Application: stainless steel; heat‑resistant superalloys and titanium (ISO M and S) FAQ What materials is this insert suited for? The TCGT090204-MM4 WSM20S insert is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S) and performs well in applications with high thermal and mechanical loads. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating on the WSM20S grade improves resistance to abrasive and thermal wear, extending tool life and maintaining edge integrity under elevated cutting temperatures. Which geometry features contribute to surface finish and stability? The triangle 60° form combined with the 0.4 mm corner radius and 7° free cutting angle creates a stable cutting edge for repeatable dimensional control and improved surface finish during finishing and semi‑finishing operations. Is the MM4 chipbreaker suitable for continuous production? Yes, the MM4 chipbreaker is optimised for consistent chip control, reducing the likelihood of built‑up edge and supporting continuous production in stainless steel and superalloy turning. Can toolholders for standard triangle inserts be used with this grade? Standard toolholders compatible with the TCGT090204 form and size are suitable; ensure correct seat and clamping to maintain repeatable positioning and tool life. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT090204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP4 chipbreaker to achieve consistent, economic turning results in steel; the triangular 60° geometry with a 0.4 mm corner radius and 7° clearance balances edge strength with surface finish. Order via Metav Werkzeuge or contact the consultants for material- and process-specific recommendations. TCGT090204-MP4 WPP20G turning indexable insert — Walter Tools, Tiger·tec Gold, MP4 chipbreaker The TCGT090204-MP4 WPP20G is a triangular, 60° turning indexable insert engineered for productive steel machining in general turning applications, combining a robust chipbreaker with a high-performance coated carbide grade. Tiger·tec Gold coating for extended lifetime Optimised MP4 chipbreaker for reliable chip control Triangle 60° shape with 0.4 mm corner radius Suitable for steel machining (ISO group P) Consistent performance where steel productivity matters The triangular insert provides a stable cutting edge geometry that supports predictable tool life and repeatable component quality. With the WPP20G grade and Tiger·tec Gold technology, the insert is formulated for the thermal and mechanical demands of steel turning, promoting stable chip formation and reduced flank wear. This results in fewer tool changes and improved machine uptime, which is particularly valuable on medium- to high-volume production runs. The combination of a coated carbide substrate and a proven grade means reliable performance across a wide range of steel alloys. Coating and grade engineered for longer cutting intervals The advanced coating system of the insert enhances oxidation resistance and reduces built-up edge formation during dry or lubricated turning operations. The WPP20G grade denotes a coated cemented carbide designed for universal steel applications, delivering a balance between wear resistance and toughness. Where process stability and consistent surface finish are priorities, this coating-grade pairing helps extend the usable life of the cutting edge and maintain dimensional accuracy over longer cycles. Geometry and chip control for efficient turning The combination of the MP4 chipbreaker and the triangular 60° geometry is tailored for controlled chip segmentation and evacuation in routine turning tasks. The 0.4 mm corner radius strengthens the cutting edge against mechanical shock while still permitting acceptable surface quality; the 7° clearance reduces rubbing and heat buildup at the flank. Together, these geometric features enable stable cutting conditions and help to prevent premature edge damage, supporting shorter cycle times and more predictable tool-change intervals. Shop-floor advantages and application fit This indexable insert is primarily configured for the machining of steel (ISO group P), making it suitable for a broad set of applications from roughing to general finishing where a robust edge and consistent chip behaviour are required. The triangle 60° form provides multiple indexing positions per insert, which contributes to cost-efficiency in production. For operations seeking a pragmatic compromise between aggressive metal removal and finish quality, the insert’s design and grade support both productivity and process security on conventional turning centres. Contact Metav Werkzeuge for tailored cutting data and availability of the Walter Tools TCGT090204-MP4 WPP20G; technical consultants are available to advise on speeds, feeds and clamping solutions Technical Data Article number: TCGT090204-MP4-WPP20G-WALTER Designation: TCGT090204-MP4 WPP20G Manufacturer: Walter Tools Facts Plate size: 09 Plate thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Shape: Triangle 60° Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP4 Material group suitability: Steel (ISO group P) Tolerance class: G FAQ What materials is this insert suitable for? The TCGT090204-MP4 WPP20G is designed for machining steel and is classified for ISO group P applications; the grade and coating handle the typical heat and chip behaviour of steel. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes controlled chip formation and evacuation during turning, improving process stability and reducing the risk of long, entangling chips when using the TCGT090204-MP4 WPP20G insert. What does the Tiger·tec Gold series provide? Tiger·tec Gold coating offers enhanced wear resistance and thermal protection, extending edge life on coated carbide inserts such as the WPP20G grade used in this Walter Tools product. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius increases edge strength compared with finer radii and helps maintain surface finish under moderate cutting conditions, making it a versatile choice for general turning. Which insert geometry is this, and why choose it? The triangular 60° geometry provides multiple indexing positions and a good compromise between cutting-edge strength and accessibility, suitable for many standard turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and ranks among the leading manufacturers of precision cutting tools for metalworking. Protected trademarks and brand names remain the property of their respective owners. The mentioned brand is cited solely for explanatory purposes; there is no affiliation implied between our company and the named manufacturers.
TCGT090204M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of consistent cutting-edge performance and controlled chip formation for reliable finishing operations; the cermet grade and FP2 chipbreaker together support stable, repeatable results. Order the insert directly via Metav Werkzeuge or contact the consultants for application guidance and availability. TCGT090204M-FP2 WEP10C — Turning and drilling indexable insert by Walter Tools (Cermet, 60°) The TCGT090204M-FP2 WEP10C is a triangular 60° indexable insert engineered for precision turning and light drilling/boring tasks, offering a fine 0.4 mm corner radius and a dedicated FP2 chipbreaker for consistent chip control. Walter Cermet grade WEP10C for wear resistance 60° triangular form for flexible indexing FP2 chipbreaker for controlled chip formation 0.4 mm corner radius for fine finishing Consistent edge life and process reliability The combination of a cermet cutting grade and a controlled geometry delivers steady edge behaviour in finishing operations. Cermet grades are optimised for thermal stability and wear resistance, which supports prolonged tool life and repeatable part tolerances. The WEP10C grade is part of the Walter Cermet series and is designed to offer reliable performance across a range of finishing applications; material suitability should be verified in the product matrix to match the workpiece and cutting data. Controlled chip formation and surface quality The FP2 chipbreaker on this insert is tuned to promote predictable chip shapes and evacuation, reducing the risk of built-up edge and minimizing surface irregularities. Together with the 0.4 mm corner radius, the geometry enables improved surface finish during light to medium finishing cuts. For customers aiming for consistent part quality, the paired chip control and small corner radius reduce the need for additional finishing passes and help maintain dimensional accuracy. Geometry and practical application in turning and boring The triangular 60° form provides multiple indexable edges and flexible orientation in standard toolholders for turning and light boring tasks. The 7° relief angle helps ensure secure cutting engagement while reducing rubbing on the flank, which benefits tool life and stability when machining interrupted cuts or slight variations in stock. This insert suits set-ups where frequent indexing and predictable edge renewal are required. Integration into production and tooling considerations When integrating this insert into a production environment, confirm holder compatibility with the TCGT090204M-FP2 form and the intended cutting parameters. The insert’s dimensional identifiers (size 09, thickness 02) and tolerance class G allow straightforward matching with holders designed for this standard form. For reproducible results, pair the insert with appropriate feeds and speeds and monitor wear progression to optimise replacement intervals and maintain cycle-time efficiency. Contact Metav Werkzeuge for tailored application advice, availability and to discuss how the Walter Tools TCGT090204M-FP2 WEP10C insert fits specific machining tasks — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TCGT090204M-FP2-WEP10C-WALTER Designation: TCGT090204M-FP2 WEP10C Manufacturer: Walter Tools Data Relief angle: 7° Corner radius: 0.4 mm Shape: Triangle 60° Size: 09 Thickness: 02 Tolerance class: G Special features Series: Walter Cermet Grade: WEP10C (cermet) Chipbreaker: FP2 Execution: T Product type: Turning/drilling indexable insert FAQ What materials is this insert suitable for? Suitability must be checked in the product matrix; the insert uses a cermet grade (WEP10C) that is typically selected for finishing applications where thermal stability and wear resistance are required. What are the key geometric characteristics of the insert? The insert is a 60° triangular form with a 0.4 mm corner radius, a 7° relief angle, size 09 and thickness 02, designed for indexing and fine finishing. What advantage does the FP2 chipbreaker provide? The FP2 chipbreaker promotes controlled chip formation and evacuation, supporting improved surface finish and consistent machining behaviour during finishing passes. Which toolholders are compatible with this insert? Holders accepting the TCGT090204M-FP2 form and standard triangular 60° inserts are suitable; confirm holder specifications against the insert dimensions for secure clamping. How many usable cutting edges are available per insert? The triangular 60° geometry provides three indexable cutting edges when rotated to renew the cutting corner. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global group of precision tools manufacturers and is recognised for high-quality cutting solutions. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanation purposes only and indicate that the offered article is original and factory-new.
TCGT090204ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of cermet performance, precise FX4 chip control and compact triangle geometry for consistent turning results; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TCGT090204ML-FX4 WEP01C indexable turning insert — triangle 60°, FX4 chipbreaker — Walter Tools TCGT090204ML-FX4 WEP01C is an indexable turning insert engineered for finishing and stable machining in demanding production environments. Cermet grade WEP01C for stable cutting FX4 chipbreaker for predictable chip control Triangle 60° form with 0.4 mm corner radius 7° clearance angle and tolerance class G Consistent surface quality through cermet technology The WEP01C grade is a cermet formulation designed to deliver improved surface finish and extended tool life compared with conventional grades in many finishing operations. Cermet inserts combine ceramic hardness with metallic toughness to resist abrasive wear while maintaining edge integrity at finishing feeds and speeds. For workshops focused on repeatable component quality, this material class reduces rework and stabilises process parameters. Reliable chip control and stable cutting edge The FX4 chipbreaker is shaped to promote short, controllable chips under a range of turning conditions, which reduces interruption from long, entangling chips and supports safer, cleaner machining. The triangular 60° form provides three usable cutting edges per insert and the 0.4 mm corner radius supports light finishing cuts while protecting the cutting edge from premature chipping. Combined with the 7° clearance angle, the geometry aids in smooth engagement and disengagement from the workpiece, improving surface consistency and reducing the risk of vibration. Precision fit and production-ready tolerances The insert is manufactured to tolerance class G, ensuring a consistent seat in compatible toolholders and minimising setup variation between insert changes. Size designation 09 and thickness 02 correspond to compact tooling systems where space and rigidity are critical. The insert belongs to the Walter Cermet series and is supplied in execution T with the ISO designation TCGT090204ML-FX4 WEP01C, making it straightforward to match to Walter toolholders and established tool lists. For material suitability, verify the specific product matrix for optimal application ranges. Contact Metav Werkzeuge to confirm whether this Walter Tools cermet insert fits the intended application and to arrange prompt supply or technical details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TCGT090204ML-FX4-WEP01C-WALTER Product: Indexable turning insert, TCGT090204ML-FX4 WEP01C (Walter Tools) Series: Walter Cermet Size: 09 Thickness: 02 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: G Shape: Triangle 60° Chipbreaker: FX4 Grade: WEP01C Execution: T ISO designation: TCGT090204ML-FX4 WEP01C Material: catalogue-dependent FAQ What materials is this insert suitable for? Material suitability must be checked against the specific product matrix; the WEP01C cermet grade is optimised for finishing applications but the final choice depends on workpiece material and process parameters. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting edges on the insert, offering economical index changes during production. What advantage does the FX4 chipbreaker provide? The FX4 chipbreaker promotes consistent, short chips and improved evacuation under a range of feeds, helping to maintain process stability and reduce interruptions from chip entanglement. What does tolerance class G mean for tool mounting? Tolerance class G indicates a controlled manufacturing tolerance for the insert seat and shape, which supports repeatable seating in compatible toolholders and reduces setup variation. What is the corner radius and how does it affect the cut? The insert has a 0.4 mm corner radius, which balances edge strength with the ability to produce fine surface finishes in light finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT090204MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of Walter Cermet finishing performance, the FX4 chipbreaker for stable chip control and the economical triangular geometry for smooth production flow; order the insert directly via Metav Werkzeuge or ask our consultants for clarification. TCGT090204MR-FX4 WEP01C — indexable turning insert, Walter Cermet, triangular 60°, 7° clearance A TCGT090204MR-FX4 WEP01C indexable turning insert engineered for finishing operations where controlled chip formation and consistent surface quality are required Walter Cermet grade WEP01C for finishing FX4 chipbreaker for controlled chip formation Triangular 60° geometry for versatile turning 7° clearance and 0.4 mm corner radius Precision surface results through cermet cutting-grade technology The Walter Cermet series combines a wear-resistant cermet substrate with a geometry tuned for fine finishing, delivering a quality surface and extended edge life in light to medium-duty turning. The insert’s fine-grain composition supports stable abrasion behaviour, which reduces the need for frequent regrinding and helps maintain component tolerances. This results in predictable production runs and reduced rework, making the grade particularly suitable where repeatable surface finish and dimensional consistency are priorities. Stable chip control that keeps cycles productive The FX4 chipbreaker has been developed to produce short, manageable chips during finishing passes, lowering the risk of entanglement and machine stoppages. Combined with the 0.4 mm corner radius, this insert aids in maintaining edge strength while permitting low cutting depths typical of finishing operations. The triangular 60° geometry offers three usable cutting edges per insert, enabling quick indexing and efficient tool usage—benefits that translate directly into better tool economy and fewer tool changes on the shop floor. Versatile application scope with clear selection guidance The WEP01C grade is positioned for precision finishing; however, material suitability should be verified against the manufacturer’s product matrix for exact workpiece categories. The series note indicates catalogue-dependent recommendations, so matching the grade to the workpiece material and machining parameters ensures optimal results. Where fine surface integrity and repeatable edge performance are required, this insert is an appropriate candidate, especially in workflows prioritising consistent finishes over heavy-material removal. Shop-floor practicality and handling advantages The insert’s 7° clearance and standardised thickness 02 specification support straightforward toolholder integration and reliable seating under normal clamping forces. The tolerance class G ensures consistent dimensions across inserts, aiding predictable assembly and reducing inspection time. The triangular shape and indexed edges allow rapid rotation to a fresh cutting edge, helping to maintain uptime and keeping maintenance cycles concise—practical benefits for production environments focused on throughput and repeatability. Contact Metav Werkzeuge for detailed cutting data, availability and ordering assistance for Walter Tools turning inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCGT090204MR-FX4-WEP01C-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Designation: TCGT090204MR-FX4 ISO designation: TCGT090204MR-FX4 WEP01C Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: 02 Geometry: triangular 60° Tolerance class: G Special features Grade: WEP01C (cermet) Chipbreaker: FX4 Series: Walter Cermet Execution: T Material recommendation: catalogue-dependent; check product matrix FAQ What materials is this insert suited to machine? Material suitability must be checked in the Walter Cermet product matrix; the WEP01C grade is intended for precision finishing applications and recommendations are catalogue-dependent. What is the purpose of the FX4 chipbreaker? The FX4 chipbreaker on the TCGT090204MR-FX4 WEP01C insert is designed to produce short, controllable chips for finishing turns, improving process reliability and reducing chip-related interruptions. How many cutting edges does the triangular insert provide? A triangular 60° insert provides three usable cutting edges, supporting quick indexing and efficient tool utilisation in production environments. What are the key geometry values to consider for setup? Important geometry data for setup are the 7° clearance angle and the 0.4 mm corner radius, which influence tool engagement, surface finish and allowable cutting depths. Is tolerance and repeatability assured for series production? Yes, the insert is specified with tolerance class G to ensure dimensional consistency and repeatable seating in the toolholder across batches. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
TCGT110201-FM2 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of proven coating technology, precise geometry and reliable chip control to maintain process stability when machining demanding alloys; order the insert or consult Metav Werkzeuge for application advice. TCGT110201-FM2 WSM20S — Indexable insert, Tiger‑tec Silver coating, triangular 60° by Walter Tools TCGT110201-FM2 WSM20S is an indexable cutting insert designed for drilling, boring and turning applications in demanding materials such as rostfreier Stahl and heat‑resistant superalloys Tiger‑tec Silver surface treatment for endurance FM2 chipbreaker for controlled chips Triangular 60° insert for robust engagement Suitable for rostfreier Stahl and superalloys Longer tool life when machining demanding alloys The Tiger‑tec Silver coating combined with the WSM20S grade gives a balance of wear resistance and thermal stability that is especially effective when machining rostfreier Stahl and nickel‑based superalloys. The coated cemented carbide substrate promotes a stable cutting edge, reducing the risk of built‑up edge and thermal softening. In practice this means fewer tool changes and more consistent component quality; the coating reduces friction and helps maintain flank and rake integrity during elevated cutting temperatures. Geometry engineered for process reliability A triangular 60° insert form with a 0.1 mm corner radius and 7° clearance ensures a robust cutting geometry for interrupted cuts and heavy engagement. The small corner radius improves edge support and reduces chipping under high load, while the clearance angle prevents rubbing and overheating of the flank face. The FM2 chipbreaker is optimised for secure chip formation in tough materials, guiding chips away from the cutting zone and lowering the risk of re‑cutting. These geometric choices translate into measurable gains in repeatability and component surface finish. Practical integration and application benefits Designed as a replaceable indexable solution, this insert fits standard toolholders for boring and turning operations and is suited to production environments that require predictable tool life. The material designation S / M indicates capability across heat‑resistant alloys and rostfreier Stahl; selection of the correct cutting data will further extend life and stability. Because the insert is part of a series engineered for high process security, it supports efficient cycle planning and reduces unplanned downtime in mixed‑material production runs. Contact Metav Werkzeuge for a tailored recommendation on holders, cutting data and availability of the TCGT110201-FM2 WSM20S insert and its compatible tooling solutions; Metav Werkzeuge can provide technical details and delivery guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCGT110201-FM2-WSM20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Insert form: Dreieck 60° Clearance angle: 7° Corner radius: 0,1 Size: 11 Thickness: 02 Special features Coating: Tiger‑tec Silver Chipbreaker: FM2 Material designation: S / M Tolerance class: G Execution: T Application: suitable for rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert intended for? The TCGT110201‑FM2 WSM20S insert by Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys (material groups S and M). How does the FM2 chipbreaker affect chip formation? FM2 provides guided chip control that produces compact, controllable chips in tough materials, improving evacuation and reducing heat build‑up at the cutting edge. Which geometry features improve edge stability? The triangular 60° form with a 0.1 mm corner radius and 7° clearance on this insert increases edge support and reduces chipping under heavy loads. Is this insert compatible with standard toolholders? Yes, the insert is an indexable format intended for common boring and turning holders; check holder compatibility with the TCGT110201‑FM2 designation. Does the Tiger‑tec Silver coating require special cutting data? Coated inserts like this benefit from optimised speeds and feeds for best life; the Tiger‑tec Silver coating enhances thermal resistance, enabling stable performance at higher cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com