TCMT090202-FM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of a coated carbide grade designed for demanding materials and a chipbreaker FM4 geometry that promotes stable chip formation and consistent edge life; the result is efficient, repeatable performance in stainless steels and superalloys. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TCMT090202-FM4 WSM20S triangle insert — Tiger‑tec Silver coated carbide by Walter Tools TCMT090202-FM4 WSM20S is a triangle 60° indexable insert for turning and boring applications, optimised for stainless steels and heat‑resistant superalloys. Tiger·tec Silver coating Suitable for stainless steel and superalloys Triangle 60° insert geometry Corner radius 0.2 mm for fine finishes High process reliability for difficult materials The Tiger·tec Silver grade WSM20S combines a coated carbide substrate with a coating technology optimised for high temperature resistance and stable chip formation. This composition supports reliable machining of stainless steel and superalloys, where workpiece toughness and heat concentration can otherwise degrade performance. The FM4 chipbreaker is designed to control chip flow and reduce built‑up edge, which translates into longer tool life and fewer interruptions on the shop floor. Users benefit from predictable tool behaviour and reduced scrap rates in continuous production. Geometry and small radius for improved surface quality The triangular 60° shape and the corner radius 0.2 mm contribute to a balanced combination of cutting strength and surface finish. A smaller corner radius helps to achieve finer surface textures while maintaining sufficient edge support for interrupted cuts. The 7° relief angle reduces rubbing and helps maintain a sharp cutting line, especially in finishing passes. Together these geometric attributes allow the insert to deliver consistent part quality in close‑tolerance turning and boring operations. Operational advantages and productivity gains Applying the TCMT090202-FM4 WSM20S insert with its FM4 chipbreaker leads to improved process stability and fewer tool changes. Stable chips reduce machine downtime and simplify chip handling in automated cells. Coating performance under the Tiger·tec Silver series enhances resistance to thermal softening, which means higher cutting parameters can be used safely in many cases. The result is demonstrable productivity benefits: longer runtimes per edge and more parts produced between indexings or insert changes. Practical application guidance and material scope The insert is particularly suitable where ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium) are encountered. In practice, this means milling or turning operations on austenitic stainless steels, Inconel‑type alloys and other high‑temperature materials where heat control and chip management are critical. Selecting an appropriate feed and depth of cut in conjunction with coolant strategy will exploit the WSM20S grade’s strengths; for mixed‑material batches the grade provides a reliable compromise between wear resistance and edge toughness. For tailored cutting data, grade selection or to secure Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for immediate application support and recommendations Technical data Article number: TCMT090202-FM4-WSM20S-WALTER Designation: TCMT090202-FM4 WSM20S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Silver Core dimensions & geometry Relief angle: 7° Corner radius: 0.2 mm Insert shape: Triangle 60° Size designation: 09 Thickness designation: 02 Tolerance class: M Chipbreaker: FM4 Materials & special features Coated carbide, Tiger·tec Silver Material groups: S / M Suitable for stainless steel and superalloys Execution: T FAQ Which materials are best suited to this insert? The insert is formulated for stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S); the WSM20S grade and Tiger‑tec Silver coating support machining in these demanding materials. What role does the FM4 chipbreaker play in practice? The FM4 chipbreaker promotes controlled chip formation and reduced built‑up edge, improving edge life and surface finish when machining tougher alloys with the TCMT090202‑FM4 geometry. How does the corner radius affect part quality? A 0.2 mm corner radius offers a compromise between cutting edge strength and the ability to achieve fine surface finishes, particularly useful for finishing passes on close‑tolerance components. Is this insert suited for interrupted cuts? Yes; the triangle form and coating combination deliver adequate edge support and heat resistance, making the insert suitable for many interrupted cutting scenarios typical in stainless steel and superalloy machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from Walter Tools.
TCMT090202-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP20G grade for consistent chip control and extended tool life in steel machining; the triangular 60° geometry and 0.2 mm corner radius help deliver a reliable surface finish and predictable performance. Order the insert via Metav Werkzeuge or contact the sales team for application advice. TCMT090202-FP4 WPP20G – indexable insert for drilling/boring and turning, Tiger·tec Gold, for steel (Walter Tools) The TCMT090202-FP4 WPP20G is a triangular 60° indexable insert designed for drilling, boring and turning operations where steel materials require stable chip formation and high process security Tiger·tec Gold coating for extended tool life WPP20G grade optimised for steel machining Triangle 60° form for versatile cutting edges 7° clearance angle for reliable engagement 0.2 mm corner radius for consistent surface finish High process reliability through advanced grade and coating The combination of the WPP20G grade and the Tiger·tec Gold coating delivers a balance between wear resistance and toughness that is particularly suited to machining steel. The coated carbide substrate reduces flank wear under the thermal and mechanical loads typical in turning and boring, while the specialised coating supports stable cutting-edge behaviour. This results in fewer unplanned tool changes, predictable cycle times and improved machine utilisation—advantages that translate directly into greater operational efficiency for production environments. Predictable chip control and surface quality The FP4 chipbreaker and the triangular 60° geometry work together to shape chips consistently during engagement, minimising the risk of built-up edge and erratic chip flow. With a 0.2 mm corner radius and a 7° clearance angle, the insert supports steady cutting forces and produces a uniform surface finish without aggressive cutting loads. For applications where component appearance and dimensional repeatability matter, these geometric choices reduce rework and downstream finishing operations. Practical handling and application range Available in the compact 09 size and a standard thickness designation, this insert is compatible with a wide range of indexable holders used in drilling, boring and turning setups. The design suits both interrupted and continuous cuts in steels, delivering economical performance for batch production as well as one-off parts. The insert’s construction and chip control features simplify process setup and contribute to consistent cycle times, making it a solid option for shops seeking reliable, repeatable machining results. Why Walter Tools’ specification supports shop productivity Walter Tools combines practical product design with industrial experience to offer tooling that emphasises stable cutting behaviour and productivity. The Tiger·tec Gold series reflects this approach by providing a modern coated carbide solution that addresses common wear mechanisms in steel machining. Choosing an insert specified for the material group and process helps safeguard part quality and reduces the need for trial-and-error optimisation on the shop floor. For tailored recommendations on using the TCMT090202-FP4 WPP20G in specific steel applications or to confirm stock and delivery details, contact Metav Werkzeuge for expert guidance and rapid processing of enquiries Technical Data Article number: TCMT090202-FP4-WPP20G-WALTER Designation: TCMT090202-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 09 Thickness designation: 02 Tolerance class: M Special features Material application: Steel (P) Chipbreaker: FP4 Grade: WPP20G Coating/substrate: coated carbide Execution: T FAQ What materials is this insert designed for? This insert is designed primarily for steel machining; the WPP20G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation behaviour of steel. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker provides controlled chip formation and evacuation, reducing the likelihood of built-up edge and promoting stable cutting conditions with the TCMT090202-FP4 WPP20G insert. Can this insert be used for both turning and boring? Yes; the triangular 60° geometry and the 7° clearance make the insert suitable for a variety of drilling/boring and turning operations where steel is the workpiece material. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius typically yields a consistent surface finish with balanced cutting forces, suitable for many general turning and boring tasks without aggressive feed-induced roughness. Is the insert compatible with common indexable holders? The 09 format and standard thickness designation ensure compatibility with a broad range of indexable toolholders for drilling, boring and turning applications using triangular inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the brands named. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
TCMT090202-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from a combination of high process reliability and broad material coverage: the Tiger·tec Gold coating and the WPP20G grade deliver extended tool life and stable chip formation for efficient turning of steel; order via Metav Werkzeuge or contact their consultants for application advice. TCMT090202-FW4 WPP20G indexable turning insert — Walter Tools, suited for steel TCMT090202-FW4 WPP20G is an indexable turning insert designed for productive steel machining, combining the Tiger·tec Gold coating technology with an FW4 chipbreaker for consistent chip control in ISO P applications. Tiger·tec Gold grade WPP20G FW4 chipbreaker for stable chip control 7° clearance angle for secure cutting Triangle 60° form with 0.2 mm corner radius More productive turning from a coated-carbide grade The TCMT090202-FW4 WPP20G insert is built on a coated carbide substrate and benefits from the Tiger·tec Gold technology, which is engineered for a balance of wear resistance and toughness. This combination reduces flank and crater wear during typical steel turning operations, leading to longer edge life and fewer insert changes. The WPP20G grade is formulated for the heat and chip characteristics of ISO P materials, making it suitable for both unalloyed and alloyed steel. Reduced tooling downtime and predictable tool life contribute directly to improved productivity and a lower cost per cutting edge in batch and continuous production. Consistent chip control and surface quality for repeatable results The FW4 chipbreaker enhances chip formation and evacuation, which supports stable cutting in a variety of feeds and depths. The insert’s 7° clearance angle and 0.2 mm corner radius produce a controlled cutting geometry that promotes good surface finish while keeping cutting forces manageable. The triangle 60° shape offers three usable cutting edges per indexable insert, which increases economy and simplifies edge rotation. For applications requiring dimensional consistency and a reliable surface, the combination of chipbreaker and geometry securely supports repeatable results and process stability. Practical application guidance and machining benefits Tolerance class M ensures a standard precision fit in common toolholders, while the plate size and thickness provide the expected rigidity for general turning tasks. The insert is specifically tuned to ISO P work, ensuring effective chip control and thermal stability when machining steel components. For process integration, the insert performs well at typical turning speeds and feeds recommended for coated-carbide grades; matching cutting parameters to material hardness and part geometry maximises tool life. Technical queries and tailored cutting data can be provided by Metav Werkzeuge to help adapt the insert to specific machines and operations. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to arrange procurement of the TCMT090202-FW4 WPP20G for production use. Technical data Article number: TCMT090202-FW4-WPP20G-WALTER Label: Drehwendeschneidplatte TCMT090202-FW4 WPP20G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Triangle 60° Plate size: 09 Plate thickness: 02 Chipbreaker: FW4 Tolerance class: M Special features Grade: WPP20G Series: Tiger·tec Gold Substrate: coated carbide Application group: ISO P (steel) Execution: T FAQ What materials is this insert designed to machine? The TCMT090202-FW4 WPP20G insert from Walter Tools is designed primarily for ISO P materials and is optimised for machining steel, including unalloyed and alloyed steels. How does the Tiger·tec Gold grade affect tool life? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, which typically extends edge life and enhances productivity in steel turning applications. What advantage does the FW4 chipbreaker provide? The FW4 chipbreaker promotes reliable chip formation and evacuation, reducing the risk of built-up edge and improving process stability during continuous turning operations. How many cutting edges are available per insert and what is the effect of the corner radius? The triangular 60° form offers three usable cutting edges; the 0.2 mm corner radius supports finer finishes and reduces cutting force peaks for smoother surface results. What does tolerance class M mean for mounting and precision? Tolerance class M indicates a standard grade of dimensional accuracy suitable for common toolholders, balancing manufacturing cost and fit precision for general turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no association between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
TCMT090202-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WSM20S grade for secure chip formation and extended tool life; order or request application advice via Metav Werkzeuge for a smooth integration into production. TCMT090202-FW4 WSM20S – Turning insert, Tiger‑tec Silver coated carbide by Walter Tools (FW4 chipbreaker) The TCMT090202-FW4 WSM20S is a triangular 60° turning insert engineered for robust machining of stainless steel and heat‑resistant superalloys, offering a balance of edge stability and predictable chip control. Tiger‑tec Silver coated carbide grade WSM20S Optimised FW4 chipbreaker for secure chip control Triangle 60° insert with 0.2 mm corner radius Reliable performance on demanding alloys The coated carbide WSM20S grade delivers stable cutting-edge performance when machining materials classified as M (stainless steel) and S (heat‑resistant superalloys and titanium). The Tiger‑tec Silver technology combines a wear‑resistant coating with a substrate designed for thermal resilience, which reduces crater wear and supports continuous operation. For production environments where consistent component tolerances and repeatable surface quality are crucial, this combination means fewer tool changes and less process variation, improving overall throughput and part reliability. Geometry engineered to improve process security A triangular 60° form with a 0.2 mm corner radius provides a predictable engagement during turning operations. This geometry, together with the FW4 chipbreaker, promotes controlled chip formation and evacuation, lowering the risk of built‑up edge and tool damage. For users with limited experience of insert geometry, the chipbreaker functions by guiding chips away from the cutting zone and moderating cutting forces, which in turn supports a more consistent surface finish and reduces the likelihood of unplanned stops. Practical advantages for production economics Selecting a coated grade with a focus on edge stability reduces the frequency of regrinding or replacement, contributing to a lower cost per part. The compact insert designation and standard ISO form make integration into existing toolholders straightforward, allowing quick replenishment in a busy shop‑floor environment. The optimised wear resistance also supports longer tool life under elevated temperatures common when machining stainless steel, which translates into measurable savings in machine downtime and consumable handling. Compatibility, handling and quality assurance The insert is supplied in the standard TCMT format and adheres to expected tolerance class M, ensuring interchangeability across compatible tool systems. The FW4 chipbreaker and the coated carbide composition are intended for medium to heavy interrupted cuts in demanding materials; however, for the best results a trial under representative machining conditions is recommended. Technical documentation for cutting data and recommended feeds and speeds can be provided to support process setup and to help achieve the targeted surface quality and tool life. Contact Metav Werkzeuge today for tailored application advice and ordering options for Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and supply Technical data SKU: TCMT090202-FW4-WSM20S-WALTER Article: TCMT090202-FW4 WSM20S Manufacturer: Walter Tools Product type: Turning insert (Drehwendeschneidplatte) Series: Tiger‑tec Silver Core measurements Free angle: 7° Corner radius: 0.2 mm Insert form: Triangle 60° Size designation: 09 Thickness designation: 02 Tolerance class: M Design & special features Coating: Tiger‑tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FW4 Suited for: stainless steel (ISO group M) Also suitable for: heat‑resistant superalloys and titanium (ISO group S) Execution: T FAQ Is this insert suitable for stainless steel machining? Yes. The WSM20S grade in the Tiger‑tec Silver series is formulated to manage the heat and toughness typical of stainless steel, providing improved chip control and edge security. What does the FW4 chipbreaker achieve in practice? The FW4 chipbreaker promotes reliable chip formation and evacuation, reducing the risk of built‑up edge and helping to maintain consistent surface finish during turning operations. Which insert geometry is used and why does it matter? A triangular 60° form with a 0.2 mm corner radius is specified; this geometry balances strength at the cutting edge with accessibility in common turning tasks, supporting stable cutting under variable loads. Can this insert be used on superalloys and titanium? Yes, the coating and grade are designed to cope with ISO group S materials; thermal resistance and edge stability make the insert suitable for many superalloy and titanium applications depending on cutting conditions. Where can cutting data and further technical information be obtained? Technical cutting parameters and application advice are available from Metav Werkzeuge; they can assist with feeds, speeds and toolholder selection for optimal results with this insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no affiliation between the seller and the trademark owners. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
TCMT090204-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
TCMT090204-FM4 WMP20G Dreieck-Wendeschneidplatte von Walter Tools Die TCMT090204-FM4 WMP20G ist eine beschichtete Wendeschneidplatte für präzise Bohr‑ und Drehaufgaben an rostfreiem Stahl und mittleren bis robusten Einsatzbedingungen Dreieck 60°: stabile Mehrfachschneide Tiger-tec Gold Beschichtung für längere Standzeit Optimale Spanform dank FM4 Spanbrecher Für rostfreien Stahl nach ISO M geeignet Eckenradius 0,4 mm für feine Schnittkanten Leistungsstarke Beschichtung für konstante Schneidkante Die Tiger-tec Gold Beschichtung kombiniert Verschleißschutz und Wärmebeständigkeit, wodurch die Standzeit der Wendeschneidplatte deutlich steigt. Bei zähfließenden Werkstoffen sorgt das beschichtete Hartmetall für reduzierte Aufbauschneidenbildung und stabilere Schneidkanten. Anwender profitieren von weniger Rüstunterbrechungen und konstanteren Fertigungsserien. Präzise Spanbildung reduziert Aufbauschneiden Mit dem FM4 Spanbrecher wird die Spanform gezielt kontrolliert, was bei der Bearbeitung von rostfreiem Stahl die Entstehung langer, fadenförmiger Späne verhindert. Das Ergebnis sind bessere Oberflächen und geringere Wärmeentwicklung am Schneidkantensystem. Besonders bei schwierigem Materialverhalten trägt die Platte zu sichereren Prozessbedingungen bei. Geometrie, Schnittbild und typische Anwendungen Die Geometrie Dreieck 60° mit Eckenradius 0,4 mm und einem Freiwinkel von 7° bietet drei nutzbare Schneidkanten pro Platte sowie eine ausgewogene Kombination aus Stabilität und Schneidfähigkeit. Einsatzgebiete sind Bohr‑ und Aufbohroperationen sowie Drehbearbeitung, wo feine Schnittkanten und wiederholgenaue Ergebnisse gefragt sind. Die kompakte Form unterstützt den flexiblen Einsatz in Werkzeughaltern. Wirtschaftlichkeit durch hohe Produktivität Die Kombination aus mehrschneidiger Geometrie und langlebiger Beschichtung macht die Wendeschneidplatte wirtschaftlich attraktiv für Serienfertigung und wechselnde Losgrößen. Weniger Werkzeugwechsel und konstante Schnittwerte führen zu höherer Maschinenlaufzeit und planbarer Produktionsleistung. Herstellerverlässlichkeit sorgt zusätzlich für reproduzierbare Fertigungsprozesse. Empfehlung: Für produktive Bearbeitung von rostfreiem Stahl die TCMT090204-FM4 WMP20G von Walter Tools über Metav Werkzeuge anfragen – Telefon +49 2822 7131930 oder eMail info@metav-werkzeuge.com Produktmerkmale Artikelnummer: TCMT090204-FM4-WMP20G-WALTER Hersteller: Walter Tools Baureihe: Tiger-tec Gold Sorte: WMP20G Ausführung: T Produktart: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Plattenform: Dreieck 60° Plattengröße: 09 Daten Eckenradius: 0,4 mm Freiwinkel: 7° Plattendicke: 02 Besonderheiten Spanbrecher: FM4 Beschichtung: Tiger-tec Gold (beschichtetes Hartmetall) Werkstoffe: rostfreier Stahl (ISO M) Toleranzklasse: M Material WPL: M FAQ Wie unterstützt die Beschichtung die Standzeit? Die Tiger-tec Gold Beschichtung der TCMT090204-FM4 WMP20G reduziert Verschleiß und Wärmeeintrag, wodurch die Standzeit bei Bearbeitung von rostfreiem Stahl verlängert wird. Für welche Werkstoffe ist die Platte ausgelegt? Primär für rostfreien Stahl (ISO M); die Sorte WMP20G wurde für mittlere bis robuste Einsatzbedingungen entwickelt. Welche Vorteile bietet der FM4 Spanbrecher konkret? Der FM4 Spanbrecher sorgt für kontrollierte Spanform und reduziert Aufbauschneiden, was zu besseren Oberflächen und sichereren Bearbeitungsbedingungen führt. Wie viele Schneidkanten bietet die Dreieck‑Geometrie? Die Dreieck 60° Form bietet drei nutzbare Schneidkanten, was die Wirtschaftlichkeit pro Platte erhöht. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT090204-FM4 WSM10S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM10S grade for secure chip control and long tool life when machining challenging materials; order this insert directly via Metav Werkzeuge or consult our specialists for process optimisation. TCMT090204-FM4 WSM10S triangle insert — Walter Tools, Tiger·tec Silver, FM4 chipbreaker TCMT090204-FM4 WSM10S is an indexable turning insert designed for heavy-duty performance in stainless and heat-resistant materials; suitable for interrupted cuts and demanding production environments. Tiger·tec Silver coating for thermal stability Suitable for rostfreier Stahl and superalloys Triangle 60° form for positive cutting geometry FM4 chipbreaker for controlled chips Robust grade for hard-to-machine alloys that increases uptime The WSM10S grade, part of the Tiger·tec Silver series, combines a coated carbide substrate with a thermal‑stable coating to resist wear under elevated temperatures. This results in consistent edge stability when turning materials that tend to work‑harden or generate heat, such as rostfreier Stahl and superalloys. Selecting this grade reduces unplanned tool changes and contributes to a smoother production rhythm by limiting edge build‑up and extending cutting intervals. Geometry that delivers repeatable accuracy and secure clamping The triangular 60° insert geometry with a corner radius of 0.4 mm and a 7° clearance angle produces a balanced mix of strength and versatility. The positive‑leaning form supports stable cutting in lateral and facing operations while the modest corner radius helps maintain dimensional accuracy without compromising tool life. Combined with the FM4 chipbreaker, the geometry promotes predictable chip formation and evacuation, easing downstream handling and reducing cycle variability. Practical advantages for workshop and production environments This indexable insert is engineered for process reliability: the coated grade and the FM4 chipbreaker enhance thermal resistance and chip control, which is particularly valuable in longer toolpaths or interrupted cuts. The insert’s coated carbide construction supports higher cutting parameters where appropriate, improving throughput without sacrificing surface finish. For manufacturers seeking a balance of productivity and repeatability, the insert offers measurable benefits in cycle time and tool consumption. For machining rostfreier Stahl and high‑temperature alloys, specify the Walter Tools TCMT090204-FM4 WSM10S insert — contact Metav Werkzeuge for tailored recommendations or to place an order; consultants are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: TCMT090204-FM4-WSM10S-WALTER Designation: TCMT090204-FM4 WSM10S Series: Tiger·tec Silver Manufacturer: Walter Tools Dimensions & core specifications Insert shape: Triangle 60° Plate size: 09 Thickness: 02 Free angle: 7° Corner radius: 0.4 mm Tolerance class: M Materials & special features Coating: Tiger·tec Silver Chipbreaker: FM4 Grade: WSM10S (coated carbide) Execution: T Suitable for: rostfreier Stahl (M), Superalloys / Titanium (S) FAQ What materials is this insert suitable for? This turning insert is designed for rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S) when using the WSM10S grade from Walter Tools. How does the FM4 chipbreaker benefit production? The FM4 chipbreaker provides controlled chip formation that improves evacuation and reduces the risk of entanglement, supporting smoother operation with the TCMT090204-FM4 WSM10S insert. What does the Tiger·tec Silver series contribute? The Tiger·tec Silver technology increases thermal resistance and edge life, enabling higher cutting parameters and improved consistency when machining demanding materials. Is the insert suitable for interrupted cuts? Yes, the triangular 60° geometry and robust WSM10S grade make the insert appropriate for interrupted cutting conditions and heavy engagement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. The offered item is an original, factory‑new product of the manufacturer.
TCMT090204-FM4 WSM20S T Wendeplatten - Walter Tools
Tiger‑tec Silver coating and the WSM20S carbide grade deliver high wear resistance and secure chip control for consistent machining of stainless steels and heat‑resistant alloys. Benefit from the FM4 chipbreaker and the 7° relief angle for stable cutting and predictable surface quality. Order the TCMT090204‑FM4 WSM20S insert directly via Metav Werkzeuge or consult our specialists for process recommendations. TCMT090204-FM4 WSM20S triangular indexable insert – Tiger‑tec Silver, FM4 chipbreaker | Walter Tools The TCMT090204-FM4 WSM20S is a triangular turning and boring insert designed for demanding applications on stainless steels and heat‑resistant superalloys, offering a balance of edge stability and controlled chip formation. Tiger‑tec Silver coating for long tool life WSM20S grade for stainless and superalloys FM4 chipbreaker for predictable chip control 7° relief angle reduces cutting forces Triangle 60° with 0.4 mm corner radius Consistent machining on stainless steels and superalloys The combination of the Tiger‑tec Silver coating and the WSM20S carbide grade is engineered to withstand the thermal and mechanical stresses typical of machining stainless steels and heat‑resistant alloys. The coating increases surface hardness and thermal stability, which in turn reduces adhesive wear and the risk of built‑up edge. This results in improved tool life and fewer interruptions for tool changes, supporting steadier production cycles and reduced unit costs. The insert’s geometry facilitates safe chip formation even under elevated cutting temperatures. Predictable chip control and improved surface finish Built‑in features such as the FM4 chipbreaker and a 0.4 mm corner radius enable consistent chip evacuation and refined surface quality. The FM4 geometry controls chip segmentation and curl, lowering the chance of long, stringy chips that can foul workpieces and holders. The 7° relief angle helps keep cutting forces manageable, so feeds and speeds can be set with greater confidence. Together these elements contribute to a reliable, repeatable finish and less downstream rework. Process stability that raises productivity Applied to both superalloys and titanium, the grade and geometry offer a stable cutting edge that tolerates common interruptions in constrained operations. Stable edges mean fewer unplanned stoppages and more predictable tool life, which can be an immediate contributor to productivity gains on the shop floor. Where small improvements in cycle time and tool availability matter, this insert provides a measurable advantage through consistent performance and repeatable results. Integration into existing tool systems and selection guidance The triangular 60° shape provides three cutting corners per index, supporting economical use of the insert in standard turning and boring toolholders. The M tolerance class and the thickness code 02 correspond to common holder interfaces; this helps simplify procurement and integration into existing tool inventories. For application‑specific recommendations—such as optimal cutting data for particular stainless grades or superalloys—technical guidance is available to ensure the chosen insert and parameters match the machining challenge. For reliable machining of stainless steels and superalloys with Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCMT090204-FM4-WSM20S-WALTER Designation: TCMT090204-FM4 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Insert size: 09 Thickness code: 02 Tolerance class: M Chipbreaker: FM4 Materials & special features Coating/grade: WSM20S (Tiger‑tec Silver) Suitable for: stainless steels (M) Also suitable for: heat‑resistant superalloys and titanium (S) Execution: T Application: turning / boring FAQ Which materials is this insert suited to machine? The TCMT090204‑FM4 WSM20S insert is specified for stainless steels (M) and is also suitable for heat‑resistant superalloys and titanium (S), reflecting the characteristics of the WSM20S grade and Tiger‑tec Silver coating. What benefits does the FM4 chipbreaker provide? The FM4 chipbreaker on the TCMT090204‑FM4 WSM20S produces controlled chip segmentation and curl, improving evacuation and reducing the risk of chip entanglement in turning and boring operations. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating enhances thermal stability and surface hardness, which reduces adhesive wear and helps maintain a stable cutting edge under the high temperatures generated when machining stainless steels and superalloys. How many cutting corners are available per insert? The triangle 60° form yields three usable cutting corners per insert, enabling economical rotation and extended tool life before disposal or regrinding. What does the tolerance class M indicate? The M tolerance class denotes dimensional tolerances suited to standard clamping systems and repeatable seating in toolholders, supporting consistent positioning and process reliability. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Protected trade names and product designations belong to their respective owners. Brand names are used for clarification only; no affiliation with or endorsement by the named manufacturers is implied. The offered item is an original, brand‑new product of the manufacturer.
TCMT090204-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of cermet cutting performance, stable chip control and a compact triangular form for consistent turning results; order directly via Metav Werkzeuge or contact the consultants for application advice. TCMT090204-FP4 WEP10C indexable insert — triangle 60°, FP4 chipbreaker, Walter Tools TCMT090204-FP4 WEP10C is an indexable turning insert designed for finishing operations and stable chip formation in diverse machining tasks Cermet grade WEP10C for fine finishing FP4 chipbreaker for controlled chip flow Triangle 60° form for versatile turning 7° clearance for secure cutting engagement Reliable surface quality for precision turning The cermet composition of the grade WEP10C delivers a balance between wear resistance and edge integrity, making it suitable for fine finishing applications where consistent surface finish is required. Cermet inserts combine ceramic and metallic binder phases to maintain a sharp cutting edge at moderate cutting speeds; this supports lower cutting forces and improved dimensional stability. The triangular geometry provides three usable cutting edges per index, supporting efficient tool use and predictable component surfaces without compromising rigidity. Stable chip control reduces interruptions and rework Equipped with the FP4 chipbreaker, this insert offers reliable chip segmentation and evacuation, which helps to avoid entangling chips and reduces the risk of rework from poor chip handling. The chipbreaker geometry is engineered to form short, controllable chips across a range of feeds, improving process stability and minimising manual intervention. For production environments where cycle time and uptime are essential, the improved chip control contributes directly to throughput and consistent part quality. Secure cutting engagement and repeatable positioning A 7° clearance angle and a corner radius of 0.4 mm provide a secure engagement with the workpiece, lowering the chance of built-up edge and offering repeatable contact conditions during indexing. The insert’s triangle 60° shape allows access to tight profiles and supports varied turning tasks; the tolerance class M ensures consistent seat fit and repeatable performance in standard toolholders. These features combine to reduce set-up time and maintain process reliability across successive tool changes. Practical compatibility and supply considerations The insert is part of the Walter Cermet series and comes in the common size designation 09 with thickness code 02, enabling straightforward replacement in compatible tool systems. The material grade availability is catalogue-dependent, so checking the product matrix is recommended to confirm suitability for a specific application or material. The execution marked T denotes the version supplied; for machining parameters and recommended speeds, consult the manufacturer matrix or Metav Werkzeuge’s technical advisors for optimisation guidance. Contact Metav Werkzeuge for application support and reliable supply of Walter Tools inserts such as the TCMT090204-FP4 WEP10C and benefit from tailored recommendations for process optimisation Technical Data Article number: TCMT090204-FP4-WEP10C-WALTER Product type: Indexable turning insert / drill/reaming compatible insert Manufacturer: Walter Tools Series: Walter Cermet Grade: WEP10C Chipbreaker: FP4 SKU: TCMT090204-FP4-WEP10C-WALTER Facts Clearance angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 09 Thickness code: 02 Tolerance class: M Special features Cermet cutting material FP4 chipbreaker geometry Series: Walter Cermet Execution: T Grade availability: catalogue-dependent FAQ What applications is this insert intended for? The TCMT090204-FP4 WEP10C insert is intended for finishing and precision turning tasks where a cermet grade and stable chip control are required; suitability for specific workpiece materials should be verified in the product matrix. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on this Walter Tools insert promotes short, controllable chips, which improves process stability and reduces manual chip clearing during continuous turning operations. Can the insert be used in standard triangular toolholders? Yes, the triangle 60° form and tolerance class M are designed for compatibility with standard toolholders that accept the size 09/ thickness 02 triangular inserts, enabling reliable seating and indexing. Is the WEP10C grade suitable for hardened steels? The grade WEP10C is a Walter cermet; material-specific applicability varies, so the product matrix should be consulted to determine suitability for hardened or alloyed steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TCMT090204-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP01G grade and a 7° clearance angle to secure stable chip control and prolonged tool life; order the insert directly via Metav Werkzeuge or request cutting data from our consultants. TCMT090204-FP4 WKP01G indexable drill/boring and turning insert — Walter Tools, Tiger·tec Gold, for steel and cast iron The TCMT090204-FP4 WKP01G is an indexable triangular (60°) insert in the Tiger·tec Gold family, engineered for versatile machining of steel (P) and cast iron (K) with a 7° clearance angle and a 0.4 mm corner radius. Tiger·tec Gold coating for long tool life WKP01G grade for steel and cast iron 7° clearance angle for dependable chip control Consistent performance for high-productivity turning The insert combines a coated carbide substrate in the WKP01G grade with the Tiger·tec Gold surface treatment to extend tool life under industrial cutting conditions. The triangular 60° geometry supplies multiple usable cutting edges, which reduces tool change frequency and supports uninterrupted production runs. With a moderate 0.4 mm corner radius, the component balances edge strength and surface finish, making it suitable for general turning operations where edge robustness and repeatability are required. Accurate chip control and improved surface quality in P and K materials Equipped with the FP4 chipbreaker and a 7° relief, the insert promotes predictable chip formation when machining both steel and cast iron according to ISO groups P and K. The chip geometry is optimised for stable evacuation and lower cutting forces, which helps achieve consistent surface integrity and reduces the likelihood of tool overload. For shops seeking reproducible results, the combination of chipbreaker and grade supports reliable machining windows with fewer rejects. Simple grade selection and dependable machining data for process security Belonging to the Tiger·tec Gold series, the WKP01G grade is designed for broad workpiece coverage and steady wear behaviour, allowing straightforward grade selection for mixed-production environments. The insert’s tolerance class M and defined geometry support predictable mounting and runout performance in compatible toolholders. For specific cutting speeds and feeds, Metav Werkzeuge can supply application data tailored to workpiece material and machine capability, ensuring process reproducibility and reduced setup time. Contact Metav Werkzeuge for technical advice and availability of Walter Tools Tiger·tec Gold inserts — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: TCMT090204-FP4-WKP01G-WALTER Article: TCMT090204-FP4 WKP01G Product type: Indexable drill/boring and turning insert Brand: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert shape: Triangle 60° Insert size: 09 Insert thickness: 02 Chipbreaker: FP4 Tolerance class: M Series: Tiger·tec Gold Grade: WKP01G Features & applications Machinable materials: Steel (P) Machinable materials: Cast iron (K) Substrate/coating: Coated carbide (Tiger·tec Gold) Typical use: Turning, drilling/boring applications Multiple cutting edges due to triangular form Designed for stable chip formation and wear resistance FAQ Which materials can this insert machine? The TCMT090204-FP4 WKP01G insert from Walter Tools is suitable for machining steel (P) and cast iron (K) in accordance with the ISO workpiece groups indicated for the WKP01G grade. What are the relief angle and corner radius? This insert features a 7° relief (clearance) angle and a 0.4 mm corner radius, which together support reliable edge strength and consistent surface quality. What chipbreaker does the insert use and why is it beneficial? The FP4 chipbreaker on the TCMT090204-FP4 WKP01G promotes controlled chip formation and efficient evacuation, improving surface finish and reducing cutting force spikes during machining of P and K materials. Will this insert fit standard TCMT triangular toolholders? Yes — the TCMT090204-FP4 WKP01G corresponds to the TCMT090204-style geometry and is compatible with toolholders designed for that ISO insert designation. What distinguishes the Tiger·tec Gold WKP01G grade? The Tiger·tec Gold WKP01G grade from Walter Tools is a coated carbide variant engineered for broad applicability across steels and cast irons, offering consistent wear resistance and process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory-new product from the manufacturer Walter Tools.
TCMT090204-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, reliable chip control and a compact triangular geometry for consistent steel machining performance; order the insert through Metav Werkzeuge or contact our consultants for cutting data and availability. TCMT090204-FP4 WPP10G turning insert – triangle 60°, for steel machining (Tiger·tec Gold) by Walter Tools TCMT090204-FP4 WPP10G is a coated carbide indexable insert designed for productive turning and boring operations on steels, offering stable cutting performance and enhanced wear resistance Tiger·tec Gold coated carbide Designed for steel (ISO P) Triangle 60° geometry Corner radius 0.4 mm, 7° relief Increased productivity with modern coating technology The Tiger·tec Gold grade delivers a measurable uplift in tool life and process stability when machining steels. The combination of a coated carbide substrate and the Tiger·tec Gold surface treatment reduces flank wear and maintains edge integrity under continuous cutting, which results in fewer tool changes and more uptime. For production environments where cycle time and repeatability matter, this grade provides a cost-effective balance between wear resistance and toughness, enabling reliable performance across a broad range of steel alloys classified under ISO P. Predictable chip formation and surface quality The FP4 chipbreaker geometry is tuned to encourage short, controllable chips during medium to heavy turning of steel, improving evacuation and reducing the risk of entanglement. Controlled chip formation contributes to consistent surface finish and stable machining forces; this results in fewer interruptions and more predictable downstream processes. The insert’s triangle 60° form also supports a range of approach angles, helping to maintain cutting stability in interrupted cuts and borefront operations. Robust geometry for repeatable tool life With a corner radius of 0.4 mm and a 7° relief, the insert is optimised for balanced strength and edge sharpness. The modest radius increases edge robustness without compromising dimensional accuracy, while the clearance angle minimises rubbing and heat generation at the flank. These geometric choices translate into fewer edge failures and more reliable component tolerances over extended production runs. The solid engineering basis of this insert ensures repeatable results in batch production and single-piece manufacturing alike. Practical application guidance for process setup When integrating this indexable insert into turning or boring cycles, pair it with toolholders and speeds suited to the steel grade being machined; the Walter Tools Tiger·tec Gold grade is particularly effective across a range of unalloyed and alloyed steels. Adjust feed and depth of cut to match the desired surface finish and cycle time—FP4 chip control typically allows for stable feeds while maintaining chip breakage. For specific cutting parameters or to confirm suitability for special steel grades, Metav Werkzeuge’s technical advisors can provide tailored recommendations and machining data. For machining with Walter Tools’ Tiger·tec Gold grade and to receive tailored cutting parameters or stock availability, contact Metav Werkzeuge for expert advice and fast fulfilment Technical data Article number: TCMT090204-FP4-WPP10G-WALTER Product designation: TCMT090204-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Core dimensions Corner radius: 0.4 mm Clearance angle: 7° Size code: 09 Thickness code: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: FP4 Shape: Triangle 60° Application group: Steel (ISO P) Execution: T Material code: P FAQ What materials is this insert intended for? The insert is specified for machining steel (ISO P); the WPP10G Tiger·tec Gold grade is formulated for the temperature and chip behaviour typical of steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes controlled, short chip formation, improving chip evacuation and helping to maintain consistent surface finish during turning of steel. Is this insert suitable for interrupted cuts? The triangle 60° geometry and robust corner radius of 0.4 mm give the insert sufficient toughness for many interrupted-cut scenarios when used within recommended parameters. How should tool life be optimised with this grade? Optimise cutting parameters to balance feed and depth of cut for the target surface finish; the Tiger·tec Gold coating helps extend edge life, reducing wear-related changes in part dimensions. Can this insert be used for boring as well as external turning? Yes, the insert is designed for a range of turning and borefront applications where the triangular form and FP4 chip control offer process flexibility. Manufacturer: Walter Tools / Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification. There is no connection between our company and the mentioned brands. The offered article is original, brand-new material from the manufacturer.
TCMT090204-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WPP20G grade together with the FP4 chipbreaker ensures reliable chip control and consistent edge life when machining steel; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCMT090204-FP4 WPP20G — triangular turning indexable insert, 0.4 mm radius, Walter Tools The TCMT090204-FP4 WPP20G is a 60° triangular turning indexable insert designed for productive and repeatable steel machining in general turning applications Tiger·tec Gold coated carbide WPP20G FP4 chipbreaker for controlled chip flow 0.4 mm corner radius for edge stability Designed for ISO P steel machining Extended edge life for continuous production The coated carbide grade WPP20G from the Tiger·tec Gold series combines wear resistance and toughness to deliver consistent edge life during extended runs. The balanced microstructure of the coating minimises flank wear while maintaining cutting integrity, so the triangular turning insert performs reliably under varying cutting forces. This stability reduces the need for frequent index changes and supports uninterrupted production cycles with predictable tool change intervals. Predictable chip control reduces downtime Equipped with the FP4 chipbreaker, the insert offers controlled chip formation that eases chip evacuation and lowers the risk of entanglement. Stable chip flow improves process security on medium to heavy turning operations, which in turn reduces machine stoppages and cleaning intervals. The combination of chip geometry and the grade’s coating makes this insert particularly suitable for ISO P steels, where heat and chip behaviour typically affect surface finish and tool life. Geometry engineered for process security The triangular 60° shape and a 0.4 mm corner radius provide a robust cutting edge that tolerates intermittent cuts and slight profile variations. The 7° relief angle supports stable engagement and helps maintain a consistent cutting edge contact with the workpiece. These geometric parameters contribute directly to dimensional repeatability and surface quality, making the insert a pragmatic choice when consistent part tolerances and reliable surface finish are required. Material guidance and practical use cases This indexable insert is optimised for machining steel (ISO P) and suits applications ranging from general turning to finishing passes where a balance between productivity and surface quality is desired. The coated carbide construction allows operation at higher cutting speeds compared with uncoated grades, while the FP4 chipbreaker helps manage swarf in interrupted cuts. For unfamiliar applications, share workpiece material and cycle data with Metav Werkzeuge to refine cutting parameters and extend performance. Discuss application specifics with Metav Werkzeuge to ensure the TCMT090204-FP4 WPP20G fits the production process; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical data Article number: TCMT090204-FP4-WPP20G-WALTER Designation: TCMT090204-FP4 WPP20G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert shape: triangle 60° Insert size: 09 Thickness: 02 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: FP4 Suitable for ISO P (steel) machining FAQ What materials is this insert suitable for? The TCMT090204-FP4 WPP20G is specified for ISO P materials; it is designed primarily for machining unalloyed and alloyed steel. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker on this Walter Tools turning insert promotes controlled chip formation, improving swarf evacuation and reducing the likelihood of tool interference during medium to heavy turning. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and edge stability, enabling longer running times and more consistent part quality under typical steel cutting conditions. Is the insert suitable for finishing operations? Yes; the 0.4 mm corner radius and stable coating make the insert suitable for finishing passes where a consistent surface finish and dimensional repeatability are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only and do not indicate any affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
TCMT090204-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the FW4 chipbreaker delivers stable, economical turning of steel: improved tool life, consistent chip control and reliable surface quality. Order the insert directly via Metav Werkzeuge or consult their application specialists for cutting-data recommendations. TCMT090204-FW4 WPP10G turning insert – FW4 chipbreaker, Tiger·tec Gold (Walter Tools) The TCMT090204-FW4 WPP10G is a triangle 60° coated carbide turning insert optimised for steel machining, offering a 7° clearance angle and a 0.4 mm corner radius for consistent finishing and extended edge life Tiger·tec Gold coated carbide grade WPP10G FW4 chipbreaker for reliable chip control 7° clearance for stable cutting geometry Triangle 60° form with 0.4 mm corner radius Productivity through a wear-resistant grade The combination of the Tiger·tec Gold coating and the WPP10G substrate provides a balance of wear resistance and toughness that reduces tool-change frequency in serial turning of steel. The coated carbide construction resists abrasive wear while maintaining a stable cutting edge at typical cutting speeds for ISO P materials. As a result, cycle times stay consistent and production costs fall, since fewer interruptions for insert changes are required. This is particularly relevant for operations aiming for predictable tool life and repeatable part quality. Geometry and chip control for consistent surface finish The triangular 60° form and the FW4 chipbreaker together ensure controlled chip formation and efficient evacuation during turning. The insert’s 7° clearance maintains secure cutting geometry, while the 0.4 mm corner radius supports light finishing passes and helps produce a uniform surface quality. The triangle form also gives multiple indexed cutting edges, increasing usable edge count and improving per-edge economy. These geometric elements translate directly into measurable benefits: steadier feeds, reduced vibration and improved surface integrity. Application guidance and material suitability Designed for machining steels (ISO group P), the grade is tuned to handle the heat and chip behaviour typical of unalloyed and alloyed steels. The specification highlights suitability for a range of steel conditions from robust, wear-resistant applications to general-purpose turning. The insert is supplied in the TCMT090204-FW4 format and is intended for standard turning toolholders compatible with triangle 60° inserts. Where specific cutting data are required for different steel alloys or batch sizes, reference values from Walter Tools and Metav Werkzeuge application notes should be used to optimise cutting speed and feed for best tool life. Contact Metav Werkzeuge for tailored application advice and availability of the Walter Tools TCMT090204-FW4 WPP10G turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for cutting-data support Technical Data Article number: TCMT090204-FW4-WPP10G-WALTER Label: Drehwendeschneidplatte TCMT090204-FW4 WPP10G Walter Tools Product type: Drehwendeschneidplatte / turning insert Manufacturer: Walter Tools ISO designation: TCMT090204-FW4 WPP10G Series: Tiger-tec Gold Data Clearance angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 09 Thickness: 02 Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: FW4 Substrate application group: P (steel) Execution: T Base designation: TCMT090204-FW4 FAQ What materials is this insert intended for? The TCMT090204-FW4 WPP10G from Walter Tools is specified for ISO group P materials, meaning it is intended for turning unalloyed and alloyed steels. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on the Walter Tools turning insert improves chip control and evacuation, resulting in steadier cutting conditions and a more consistent surface finish during steel turning. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and edge stability on the Walter Tools TCMT090204-FW4 WPP10G insert, extending usable edge life and supporting reliable production runs. Can this insert be indexed for multiple cutting edges? Yes, the triangle 60° form of the insert allows indexing to use several cutting edges, improving economy per insert in standard turning toolholders Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned exclusively for explanation and identification. There is no connection between our company and the referenced brands; the offered item is original, factory-new merchandise of the named manufacturer.
TCMT090204-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, a stable FW4 chipbreaker and a compact triangular form to secure reliable machining of Stahl components; order these inserts from Metav Werkzeuge or consult their advisors for optimal tool selection. TCMT090204-FW4 WPP20G indexable turning insert – coated carbide for Stahl | Walter Tools TCMT090204-FW4 WPP20G is an indexable turning insert designed for steel machining applications, offering a Tiger·tec Gold coating, a FW4 chipbreaker and a compact triangular geometry for efficient metal removal Tiger·tec Gold coating for process security FW4 chipbreaker for reliable chip control 7° clearance angle for stable cutting Triangular 60° form with 0.4 mm nose radius High process security through coated carbide and chip control The combination of Tiger·tec Gold coating and a coated carbide substrate delivers consistent cutting performance and improved tool life when machining Stahl. The coating reduces flank wear and enhances thermal resistance under typical turning conditions for this material group. The integrated FW4 chipbreaker stabilises chip formation, reducing the risk of entanglement and supporting a controlled evacuation of swarf. Together these features translate into fewer interruptions, less machine downtime and a predictable tool-change rhythm, which supports higher overall productivity in batch and single-piece production alike. Precise edge geometry for repeatable form and finish The triangular 60° insert shape provides three indexable cutting corners, while the 0.4 mm nose radius and 7° clearance angle deliver a compromise between edge strength and surface quality. The compact design enables close tolerances and stable cutting across finishing and semi-finishing passes. Because the insert is available in a standard ISO designation, it integrates easily into existing toolholders and tool management systems. Operators gain repeatable results with a small, strong cutting edge that resists chipping during interrupted cuts and provides a reliable surface finish on machined components. Application guidance and economic advantage in production Classified for ISO group P, this grade is optimised specifically for machining Stahl, combining wear resistance and toughness for a broad range of unalloyed and alloyed steels. The insert’s robust edge and coating strategy make it suitable for general turning tasks, from medium-duty roughing to precision finishing, depending on cutting data. The indexable nature keeps tooling costs low: multiple edges per insert and predictable wear characteristics reduce inventory turnover and support cost-effective production planning. For specific cutting speeds and feeds, consult Metav Werkzeuge for tailored recommendations that match the machine power and workpiece alloy. For professional machining projects, consider stocking the Walter Tools TCMT090204-FW4 WPP20G inserts for stable, repeatable performance in Stahl operations — contact Metav Werkzeuge for application-specific advice and procurement support Technical data Article number: TCMT090204-FW4-WPP20G-WALTER Designation: TCMT090204-FW4 WPP20G Facts Clearance angle: 7° Nose radius: 0.4 mm Insert form: Triangle 60° Size: 09 Thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: FW4 Manufacturer: Walter Tools Execution: T Series: Tiger-tec Gold Application group: Stahl FAQ What materials is this insert designed for? The insert is specified for machining Stahl and the grade WPP20G is tuned for the thermal and chip-formation behaviour typical of that material group. How does the FW4 chipbreaker affect performance? The FW4 chipbreaker on the TCMT090204-FW4 WPP20G insert improves chip control and evacuation, which contributes to stable cutting and reduced risk of chip-related surface damage. How many usable edges does the triangular insert provide? A triangular 60° insert offers three indexable cutting edges; the precise corner geometry supports repeatable results across multiple indexing cycles. Is this insert suitable for finishing passes? With a 0.4 mm nose radius and a coated carbide substrate, the insert can be used for both semi-finishing and finishing tasks depending on cutting data and machine stability; consult Metav Werkzeuge for optimisation tips. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand name: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanation; there is no affiliation between our company and the referenced brands. The offered article is an original, factory‑new product of the manufacturer.
TCMT090204-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Combine reliable edge stability, a Tiger·tec Silver coated grade and optimised chip control for predictable turning of stainless steels and superalloys; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TCMT090204-FW4 WSM20S – Triangle 60° indexable turning insert for stainless steels and superalloys (Tiger·tec Silver, Walter Tools) The TCMT090204-FW4 WSM20S is a 60° triangular indexable turning insert designed for demanding machining tasks in stainless steels and heat-resistant alloys; it pairs a robust coated carbide grade with a secure chipbreaker to maintain process stability. Tiger·tec Silver coated carbide WSM20S Triangle 60° form with 0.4 mm radius FW4 chipbreaker for secure chip formation Suited for stainless steels and superalloys High-performance grade that extends tool life and process reliability The coated carbide WSM20S grade, based on Tiger·tec Silver technology, is formulated for the thermal and mechanical loads typical of stainless steels and heat-resistant superalloys. Its multilayer coating enhances edge stability and reduces abrasive wear, which translates into longer intervals between index changes and fewer unplanned stoppages. In practice, the result is a more consistent surface finish and reduced tooling consumption for serial and small-batch production alike, improving overall machining economy without sacrificing precision. Controlled chip formation and safer machining for difficult materials The FW4 chipbreaker geometry supports reliable chip control when turning materials that tend to produce long or stringy swarf. Combined with the insert’s 0.4 mm corner radius, the system promotes stable cutting forces and predictable chip shapes, which lowers the risk of built-up edge and chatter on semi-finished components. For operators, this means fewer interruptions for swarf management and more repeatable cycles when machining shafts, rings or complex contours in demanding alloys. Geometry and tolerance that simplify process setup and reproducibility The 60° triangular form offers three indexed edges per insert, delivering cost-effective cutting edge utilisation. The specified free angle of 7° and the tolerance class M contribute to consistent engagement and minimal seat distortion in conventional toolholders. This combination supports a straightforward parameter window for spindle speeds and feed rates when switching between batches or workpiece materials, making it easier to standardise process sheets and maintain reproducible part quality. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools’ TCMT090204-FW4 WSM20S with Tiger·tec Silver for demanding stainless steel and superalloy turning; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT090204-FW4-WSM20S-WALTER Article: TCMT090204-FW4 WSM20S Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Silver Facts Free angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: 02 Tolerance class: M Special features Grade: WSM20S (coated carbide) Chipbreaker: FW4 Geometry: Triangle 60° Applications: stainless steels (M), superalloys and titanium (S) Material code: S / M FAQ What materials is this insert suitable for? The TCMT090204-FW4 WSM20S is intended for machining stainless steels and heat-resistant superalloys; the WSM20S grade and FW4 chipbreaker support secure chip formation under those conditions. How does the Tiger·tec Silver coating help in turning operations? Tiger·tec Silver enhances edge stability and wear resistance on the WSM20S insert, which improves tool life and keeps surface finish consistent during extended runs in demanding materials. What chip control can be expected with the FW4 chipbreaker? The FW4 chipbreaker produces compact, manageable chips in difficult-to-machine alloys, reducing swarf-related interruptions and enabling safer, more reliable turning cycles. How many usable edges does the triangular insert provide? The 60° triangular geometry provides three indexed cutting edges per insert, offering economical edge utilisation and straightforward re-indexing during production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original factory-new product of the manufacturer (Walter Tools).
TCMT090204-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the WKK10S grade and Tiger‑tec Silver coating for a balance of wear resistance and predictable chip control; the triangular 60° geometry with a 0.4 mm nose radius and 7° clearance supports consistent cast‑iron machining and longer production runs. Order or request application advice directly via Metav Werkzeuge for tailored recommendations. TCMT090204-MK4 WKK10S – Boring/turning indexable insert, Tiger‑tec Silver grade for cast iron by Walter Tools TCMT090204-MK4 WKK10S is a triangular indexable insert engineered for productive machining of cast iron in boring and turning applications Tiger‑tec Silver coating for wear resistance Optimised for cast iron machining 60° triangular insert with 0.4 mm nose MK4 chipbreaker for controlled chips Reliable performance for abrasive cast‑iron work The WKK10S grade, applied within the Tiger‑tec Silver series, is formulated as a coated carbide solution for abrasive cast‑iron materials. Its combination of coating technology and substrate composition improves wear resistance and reduces flank wear under typical cast‑iron cutting conditions. The MK4 chipbreaker is designed to produce short, manageable chips when machining brittle, abrasive workpieces, which supports uninterrupted production cycles and reduces the risk of chip-related interruptions. This results in clearer process windows and a more predictable tool life, enhancing manufacturing throughput. Geometry tuned for consistent surface quality and edge stability The triangular 60° format with a 0.4 mm corner radius balances edge strength and surface finish, making the insert suitable for general turning and boring where moderate radii are required. A 7° clearance angle helps to reduce rubbing while maintaining a stable cutting edge, and the compact insert thickness supports secure clamping in standard toolholders. Together, these features provide repeatable contact conditions at the cutting zone, which contributes to uniform component finishes and reduces rework in serial production. Practical benefits that support productivity and process reliability Using this insert simplifies tool management in cast‑iron operations: the standard TCMT designation fits common insert toolholders, while the MK4 chip control reduces the need for special chip evacuation measures. The Tiger‑tec Silver coating assists in extending tool life, lowering the frequency of tool changes and the associated downtime. For production environments prioritising consistency, the insert delivers predictable wear behaviour and ease of replacement, helping to keep cycle times stable and overall machining costs down. Ask Metav Werkzeuge for application-specific guidance and secure the TCMT090204-MK4 WKK10S insert with Tiger‑tec Silver for dependable cast‑iron productivity — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: TCMT090204-MK4-WKK10S-WALTER Designation (ISO): TCMT090204-MK4 WKK10S Grade: WKK10S Series: Tiger‑tec Silver Manufacturer: Walter Tools Data Insert shape: Triangle 60° Insert size: 09 Thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: MK4 Tolerance class: M Execution: T Special features Coated carbide (Tiger‑tec Silver) Grade optimised for cast iron Suitable for boring and turning operations Designed for short, controllable chips Stable cutting edge for productive machining FAQ Which materials is this insert suitable for? The TCMT090204-MK4 WKK10S insert is optimised for machining cast iron; the WKK10S grade and Tiger‑tec Silver coating address the abrasive wear and brittle chip forms typical for these materials. What advantage does the Tiger‑tec Silver coating provide? Tiger‑tec Silver improves wear resistance and thermal stability of the coated carbide substrate, which in the TCMT090204-MK4 WKK10S leads to more consistent tool life and reduced flank wear during cast‑iron production runs. For which operations is the MK4 chipbreaker best suited? The MK4 chipbreaker on this triangular insert is engineered to produce short, controlled chips in brittle, abrasive materials, making it well suited to both boring and turning tasks where chip control is essential. How does the 0.4 mm nose radius affect the result? A 0.4 mm nose radius provides a compromise between edge strength and surface finish; it supports durable cutting edges for heavier feeds while still enabling acceptable component finishes in general machining of cast iron. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is recognised among the world’s leading manufacturers of precision metalworking tools. Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. The offered article is an original, factory‑new product of the manufacturer.
TCMT090204-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, reliable chip control, and coated carbide performance for productive cast-iron machining; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCMT090204-MK4 WKK20S — Triangle 60° indexable insert for cast iron machining, Walter Tools TCMT090204-MK4 WKK20S is an indexable turning/drilling insert designed for efficient machining of cast iron components, combining a Tiger·tec Silver coating with a robust MK4 chipbreaker. Tiger·tec Silver coated carbide Optimised for cast iron machining MK4 chipbreaker for reliable chip control Triangle 60° with 0.4 mm corner radius High-performance coating for consistent productivity The Tiger·tec Silver surface treatment delivers a coated carbide layer engineered for abrasive resistance and stable cutting behaviour when working with cast iron. This microstructure reduces flank wear and supports longer intervals between tool changes, which directly improves machine uptime. As a result, shops experience a measurable increase in throughput and lower process interruptions, while maintaining consistent component tolerances. The material combination and coating technology target the short, brittle chips typical of cast iron, translating into predictable tool life and fewer edge failures. Geometry that improves stability and reduces set-up time The triangular 60° configuration and 0.4 mm corner radius provide a compact cutting edge geometry that is well suited to gnawing cuts and interrupted surfaces common in grey and nodular castings. The 7° clearance angle reduces rubbing and heat build-up at the flank, enhancing dimensional stability during longer cuts. Together with the MK4 chipbreaker, this geometry offers controlled chip formation and evacuation, lowering the need for frequent manual chip clearing and enabling steadier cycle times across production batches. Process safety and repeatable results for production environments Built to Walter Tools’ quality standards, the WKK20S grade provides a balance between wear resistance and toughness appropriate for abrasive cast-iron grades. The insert’s design supports predictable wear patterns and repeatable performance across multiple components, which helps to reduce scrap rates and inspection overhead. In automated or lights-out operations, this repeatability becomes a tangible economic advantage: fewer unplanned tool changes, less downtime and a more stable manufacturing rhythm. Practical application notes and benefits for workshop planners The insert suits a range of turning and drilling-upboring applications where cast iron is the predominant workpiece material. Its MK4 chip control reduces the risk of long, entangling swarf and supports safer machining at higher material removal rates. For maintenance planners and process engineers, the insert’s combination of coating and geometry often results in lower indirect costs—less downtime, reduced tool inventory turnover and simpler reconditioning cycles. For shops requiring tailored cutting data, Metav Werkzeuge’s consultants can advise on feeds and speeds adapted to machine rigidity and part geometry. For application-specific recommendations or rapid delivery of Walter Tools' TCMT090204-MK4 WKK20S inserts, contact Metav Werkzeuge for expert guidance and ordering via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: TCMT090204-MK4-WKK20S-WALTER Designation: TCMT090204-MK4 WKK20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Numbers / Core technical data Plate size: 09 Thickness: 02 Corner radius: 0.4 mm Relief angle: 7° Plate form: Triangle 60° Tolerance class: M Special features / Applications Coating: Tiger·tec Silver (coated carbide) Chipbreaker: MK4 Material application: Cast iron Product type: Indexable insert for drilling/turning FAQ What materials is this insert designed for? The TCMT090204-MK4 WKK20S insert by Walter Tools is optimised for cast iron machined parts and the WKK20S grade targets abrasive wear typical of such materials. How does the MK4 chipbreaker affect machining performance? The MK4 chipbreaker on the TCMT090204-MK4 WKK20S promotes short, controllable chips, improving evacuation and reducing the risk of chip entanglement in cast-iron turning operations. Is the coating suitable for high-speed applications? The Tiger·tec Silver coating increases wear resistance and thermal stability, making the insert well suited to sustained cutting speeds used in productive cast-iron machining, while supporting consistent tool life. Which insert geometry supports interrupted cuts and roughing? The 60° triangular form combined with a 0.4 mm corner radius and 7° relief improves edge strength and stability, making this insert appropriate for interrupted cuts and robust roughing passes in cast iron. Can this insert be used in automated production with lights-out shifts? Yes; the WKK20S grade and coated carbide construction provide repeatable wear behaviour and process security suited to automated or unattended production where predictable tool life is essential. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise from Walter Tools.
TCMT090204-MM4 WMP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, optimised MM4 chip control and precise geometry for consistent turning of rostfreier Stahl; request application advice or place an order via Metav Werkzeuge for seamless integration into production. TCMT090204-MM4 WMP20G turning/boring insert – Walter Tools, Tiger·tec Gold, for rostfreier Stahl The TCMT090204-MM4 WMP20G is a triangular indexable insert designed for robust turning and boring operations, optimised for processing rostfreier Stahl under medium to heavy cutting conditions. Tiger·tec Gold coating for extended tool life MM4 chipbreaker for stable chip formation 7° clearance angle reduces flank rubbing Triangle 60° form for multiple cutting edges Durable coating that prolongs productive runtime The Tiger·tec Gold coating combined with the WMP20G substrate provides a high level of wear resistance and thermal stability, which translates into longer tool life and fewer insert changes during serial production. This coating technology is particularly effective when machining rostfreier Stahl, where work-hardening and heat generation demand a robust surface treatment. The result is reduced downtime and improved process stability, supporting consistent component tolerances over extended runs. Reliable chip control tailored to stainless applications Thanks to the MM4 chipbreaker geometry, chip formation is guided reliably even in sticky or tough materials. For rostfreier Stahl, where chips can be long and stringy, this optimised chip control minimises the risk of entanglement and surface damage. Stable chips also help maintain cutting-edge integrity, which in turn sustains dimensional accuracy and reduces the need for rework—a direct contribution to production efficiency and cost control. Geometry engineered for repeatable cutting performance The insert’s triangle 60° form and corner radius 0.4 mm deliver a balance between strength and edge definition: the triangular shape offers three usable cutting corners per insert, while the measured corner radius supports moderate depth of cut with secure edge retention. The 7° clearance angle reduces rubbing on the flank face, lowering heat transfer to the insert body and promoting a predictable wear pattern. These geometric features together ensure reproducible results in routine turning operations. Simple selection and integration into existing tooling systems With a clear ISO-style designation and compact dimensions (insert size 09, thickness 02), this insert fits common clamping systems and toolholders used in day-to-day turning and boring. The product’s tolerance class M and execution T indicate manufacturing precision and suitability for medium-grade applications. For engineers seeking reliable replacement inserts with known fitment behaviour, the standardised designation simplifies inventory management and tool-change planning. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts, request a cutting test recommendation or obtain a quotation by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TCMT090204-MM4-WMP20G-WALTER Designation: TCMT090204-MM4 ISO designation: TCMT090204-MM4 WMP20G Grade: WMP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: 02 Insert form: Triangle 60° Chipbreaker: MM4 Special features Coating: Tiger·tec Gold Suitable material group: rostfreier Stahl Tolerance class: M Execution: T Application: Turning / boring insert FAQ What materials is this insert recommended for? The TCMT090204-MM4 WMP20G insert is specified for machining rostfreier Stahl and is formulated to manage the toughness and heat tendency of these alloys. How does the MM4 chipbreaker benefit production? The MM4 chipbreaker on this Walter Tools insert promotes predictable chip shapes and prevents long, uncontrollable chips when machining rostfreier Stahl, improving process reliability. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting corners per insert before reindexing is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product of the manufacturer.
TCMT090204-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coating for high wear resistance, the WSM10S grade optimised for rostfreier Stahl and heat‑resistant alloys, and the MM4 chipbreaker for stable chip control; order the TCMT090204‑MM4 WSM10S directly via Metav Werkzeuge or ask our consultants if needed. TCMT090204‑MM4 WSM10S indexable insert for turning/drilling — Tiger‑tec Silver, MM4 chipbreaker (Walter Tools) TCMT090204‑MM4 WSM10S is an indexable insert designed for demanding turning and boring applications in rostfreier Stahl and heat‑resistant alloys Tiger‑tec Silver coating for high wear resistance WSM10S grade for rostfreier Stahl and superalloys MM4 chipbreaker for stable chip formation Triangle 60° form with 7° relief for precision High‑performance grade for difficult materials The insert uses the WSM10S grade within the Tiger‑tec Silver family to address difficult‑to‑machine alloys. The coated cemented carbide chemistry combines wear resistance with thermal stability, which reduces flank wear and supports stable chip formation when machining rostfreier Stahl and heat‑resistant superalloys. This results in longer tool life and more predictable tool‑change intervals, helping to keep production flows consistent and efficient. Geometry that supports precise, repeatable machining A triangle 60° form with 7° relief and a corner radius 0.4 mm delivers a balance between strength and finish. The MM4 chipbreaker is shaped to control chip flow under varying cut depths, reducing the risk of built‑up edge and improving surface quality. The insert's form and clearance reduce vibration and promote repeatable dimensional accuracy, making it suitable for both finishing passes and more aggressive turning operations where process reliability matters. Practical benefits for the production environment Tolerance class M and the execution type T ensure consistent fit and indexing in standard toolholders, while the insert format (plate size 09, thickness 02) allows straightforward integration into common turning and boring tool systems. The design supports quick indexing for multiple edges, lowering per‑edge cost and reducing downtime. Combined with the coating and chipbreaker, the insert offers a practical route to increased productivity and dependable component quality in industrial metalcutting applications. Contact Metav Werkzeuge for application advice, compatibility checks and to arrange supply of the TCMT090204‑MM4 WSM10S from Walter Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT090204‑MM4‑WSM10S‑WALTER ISO designation: TCMT090204‑MM4 WSM10S Product type: Indexable insert for turning/boring Series: Tiger‑tec Silver Manufacturer: Walter Tools Core dimensions Form: Triangle 60° Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 02 Design & applications Grade: WSM10S Chipbreaker: MM4 Material suitability: S / M (rostfreier Stahl; heat‑resistant superalloys and titanium) Tolerance class: M Execution: T FAQ What workpieces is this insert best suited to? The TCMT090204‑MM4 WSM10S from Walter Tools is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering controlled chips and thermal stability on tough alloys. How does the Tiger‑tec Silver coating help tool life? The Tiger‑tec Silver coating on this Walter Tools insert improves wear resistance and heat tolerance, which extends edge life and reduces unplanned tool changes in high‑temperature cutting of rostfreier Stahl. Can the insert be reindexed for multiple edges? Yes, the triangular 60° format of the TCMT090204‑MM4 WSM10S allows multiple edge indexing, helping to lower running costs per edge and maintain productivity in series production. What role does the MM4 chipbreaker play? The MM4 chipbreaker ensures stable chip formation across a range of cut depths, reducing built‑up edge and supporting consistent surface finish when machining rostfreier Stahl and superalloys. Is this insert compatible with standard toolholders? The insert conforms to the TCMT format and tolerance class M, which makes it compatible with standard turning and boring toolholders designed for TCMT inserts. Protected trademarks and trade names are the property of their respective owners. Where referenced, brand names are used solely for identification and comparison; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, new product from the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCMT090204-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the MM4 chipbreaker for secure chip control and extended tool life when machining stainless steel and heat‑resistant superalloys; order the insert directly via Metav Werkzeuge or request cutting data from the consultants for immediate integration into production. TCMT090204-MM4 WSM20S triangular turning insert, Tiger·tec Silver – for stainless steel and superalloys | Walter Tools The TCMT090204-MM4 WSM20S is a triangular 60° indexable insert engineered for stable, high‑temperature performance in turning and boring applications on stainless steel and heat‑resistant alloys. Tiger·tec Silver coating for heat resistance Suitable for stainless steel and superalloys Triangular 60° form with 0.4 mm corner radius MM4 chipbreaker for reliable chip control High thermal stability for demanding materials The Tiger·tec Silver coating, combined with the MM4 chipbreaker, was developed to sustain cutting edge integrity under thermal and mechanical stress. This combination enables predictable wear behaviour and reduces the risk of built‑up edge when machining stainless steel and high‑temperature superalloys. The result is a repeatable process window with fewer unscheduled tool changes and a demonstrable improvement in productive cutting time. The chemistry and microstructure of the coating are optimised for temperature resistance and adhesion to the substrate, which supports a longer effective tool life under elevated cutting temperatures. Geometry tuned for stability and surface quality With its triangular 60° form, the insert provides three usable cutting edges and a compact cutting edge engagement suited to a wide range of turning tasks. The 0.4 mm corner radius balances edge strength and surface finish: it increases robustness in interrupted cuts while still permitting acceptable roughness values. The 7° clearance reduces friction behind the cutting edge, promoting consistent chip flow and reduced secondary deformation. These geometric characteristics make the insert a reliable choice where dimensional stability and surface integrity are required on challenging workpiece materials. Efficiency gains and longer service intervals The carbide grade and coating system are optimised for a balance between wear resistance and toughness, which translates into economic operation through extended tool life and reduced tooling costs per part. Reliable chip control from the MM4 geometry shortens cycle times by preventing chip entanglement and minimising machine stoppages for clearing. For production environments this means higher machine utilisation and improved process capability, particularly when serial runs involve stainless steel or heat‑resistant alloys that are prone to work hardening and thermal loading. Practical application guidance for process integration The insert is supplied in the standard TCMT090204‑MM4 configuration with size code 09 and thickness code 02, suited for conventional clamping in compatible toolholders. It is typically recommended for medium to heavy interrupted turning and finishing where the balance between edge life and surface requirement is critical. For initial process setup, start with conservative feed and speed values appropriate for the workpiece alloy group, then adapt parameters according to tool wear and component tolerance. Technical data sheets and recommended cutting parameters can be provided to support commissioning and tool‑path optimisation. Contact Metav Werkzeuge for tailored cutting data and reliable supply of Walter Tools TCMT090204-MM4 WSM20S inserts with Tiger·tec Silver and MM4 chipbreaker — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support Technical Data Article number: TCMT090204-MM4-WSM20S-WALTER SKU: TCMT090204-MM4-WSM20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade/Sorte: WSM20S Designation: TCMT090204-MM4 Facts Form: Dreieck 60° Size: 09 Thickness: 02 Clearance angle: 7° Corner radius: 0.4 mm Chipbreaker: MM4 Special features Coating: Tiger·tec Silver Carbide substrate: coated cemented carbide Application: Turning and boring of stainless steel and superalloys Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The TCMT090204‑MM4 WSM20S insert is intended for machining stainless steel and heat‑resistant superalloys (ISO groups M and S), where the Tiger·tec Silver coating supports thermal stability. How does the MM4 chipbreaker influence machining? The MM4 chipbreaker on this Walter Tools insert is designed to produce predictable chips and reduce entanglement; this supports continuous cutting on stainless steel and improves process safety. What does the 0.4 mm corner radius mean for edge strength? A 0.4 mm corner radius increases resistance to edge chipping in interrupted cuts while maintaining a balance with surface finish; it is suitable for medium‑duty turning operations. Is the insert compatible with common TCMT toolholders? The insert follows the TCMT090204‑MM4 designation and fits standard toolholders designed for TCMT geometry; check holder seat type and clamping compatibility before mounting. Where can cutting parameters for this insert be obtained? Walter Tools and Metav Werkzeuge provide recommended cutting data for the TCMT090204‑MM4 WSM20S based on workpiece alloy and operation type; consult the technical datasheet for initial settings. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. No connection between our company and the named brands is implied. The offered article is an original, brand‑new product of the manufacturer.
TCMT090204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of coated‑carbide durability, the Tiger‑tec Gold performance grade WPP20G and the MP4 chipbreaker for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our advisors for cutting data and availability. TCMT090204-MP4 WPP20G — Triangular indexable insert for steel turning, Tiger‑tec Gold by Walter Tools A TCMT090204-MP4 WPP20G insert engineered for reliable material removal in steel turning and boring applications, combining a tough coated carbide grade with a chipformer designed for consistent chip control. Tiger‑tec Gold coated carbide grade WPP20G Triangular 60° form for versatile toolholders 7° clearance angle for stable cutting action MP4 chipbreaker for controlled chip formation Improved productivity through advanced grade and coating The Tiger‑tec Gold coating paired with the WPP20G grade delivers a balance of wear resistance and toughness that supports higher cutting speeds and longer edge life in steel machining. This combination reduces tool changes and contributes directly to process economy, while the coated‑carbide substrate sustains mechanical strength under thermal load. The design specifically targets common turning challenges in ISO P materials, enabling more consistent cycle times and predictable tool life. Geometry that enhances dimensional accuracy and surface finish A triangular 60° plate form with a 0.4 mm corner radius and a 7° clearance angle provides a robust cutting edge that resists chipping while maintaining the cutting geometry needed for precise profiles. The plate thickness and the size designation ensure compatibility with standard toolholders, and the moderate corner radius helps to achieve a balance between edge strength and surface quality. These geometric choices translate into fewer reworks and more reliable component tolerances during serial production. Chip control and application focus for steel turning The MP4 chipbreaker is tuned for controlled chip formation when machining steel, reducing the risk of long stringy chips and improving evacuation in both continuous and interrupted cuts. With a tolerance class of M and a designation tailored for steel (ISO P), the insert suits a variety of turning operations from medium‑duty roughing to finishing passes. Integration into production is straightforward, and the consistent chip behaviour supports safer and more efficient machining routines. Contact Metav Werkzeuge to evaluate toolholder compatibility and cutting data for Walter Tools TCMT090204-MP4 WPP20G; Metav Werkzeuge's consultants can provide application advice and delivery information at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TCMT090204-MP4-WPP20G-WALTER Designation: TCMT090204-MP4 WPP20G Manufacturer: Walter Tools Key Measurements Plate size: 09 Plate thickness: 02 Clearance angle: 7° Corner radius: 0.4 Tolerance class: M Features & Applications Grade: WPP20G Series: Tiger‑tec Gold Chipbreaker: MP4 Plate form: triangular 60° Suitable for steel Coated carbide FAQ What materials is this insert intended for? The TCMT090204-MP4 WPP20G insert is formulated primarily for steel (ISO P), offering optimised wear resistance and chip control for unalloyed and alloyed steels. What does the WPP20G grade indicate? WPP20G denotes Walter Tools' coated‑carbide grade within the Tiger‑tec Gold series, balancing hardness and toughness for versatile performance in steel machining. Which chipbreaker does the insert use and what is its benefit? This insert features the MP4 chipbreaker, designed to produce short, manageable chips and improve evacuation during both finishing and medium cutting operations. Is the insert compatible with standard triangular toolholders? Yes; the triangular 60° plate form and the TCMT designation correspond to common toolholders for indexable turning inserts, with plate size 09 and thickness 02 matching standard seat dimensions. How does the corner radius affect cutting performance? A 0.4 mm corner radius increases edge strength and contributes to stable cutting in interrupted cuts while still allowing good surface finish in finishing passes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for product identification and comparison only. There is no affiliation implied between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
TCMT090204-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Achieve consistent material removal and long service life by combining the Tiger·tec Silver coated grade with an RK4 chipbreaker for reliable chip control in cast iron turning. Benefit from the triangular geometry and precise clearance to maintain surface quality and process stability — order the TCMT090204-RK4 WKK20S via Metav Werkzeuge or consult their technical advisors for application support. TCMT090204-RK4 WKK20S — Turning indexable insert from Walter Tools for cast iron A triangular turning indexable insert, the TCMT090204-RK4 WKK20S is engineered for robust and repeatable machining of cast iron components in general turning applications Tiger·tec Silver coating for high wear resistance RK4 chipbreaker optimised for cast iron machining Triangle 60° geometry for flexible turning operations 7° clearance angle with 0.4 mm corner radius Higher output with predictable tool life The combination of a coated carbide grade and the proprietary Tiger·tec Silver technology provides a balance between abrasive-wear resistance and edge toughness tailored for cast iron (ISO K). This grade, designated WKK20S, addresses the frequently short, brittle chips produced when machining cast materials; the result is stable chip formation and reduced edge chipping. The RK4 chipbreaker has been shaped and tested for reliable evacuation of fragmented chips typical of grey and ductile cast irons, which in practice lowers downtime caused by clogged flutes or interrupted feeds. The technical configuration therefore leads directly to more consistent cycle times and fewer interruptions on production lines. Geometry designed for consistent surface quality and edge strength A triangular 60° insert provides three usable cutting edges per indexable piece, increasing economy and reducing change intervals. The geometry of this insert, including the 0.4 mm corner radius, has been chosen to deliver a compromise between edge strength and achievable surface finish: the small radius resists mechanical shock while still allowing fine finishes on turned bores and faces. The 7° clearance angle limits flank rubbing, so heat build-up is reduced and flank wear is delayed. Together these features support repeatable dimensional results and help maintain machining tolerances in medium-duty and finishing operations. Practical integration and production advantages Built to tolerance class M and supplied as part of the Tiger·tec Silver series, the insert is compatible with standard triangular toolholders used in most turning centres. Its specification simplifies stock management: one grade for a wide range of cast-iron tasks. Using a wear-resistant coated grade such as WKK20S typically reduces the frequency of tool changes and rework, improving throughput and lowering per-part tooling costs. For workshops seeking process reliability, the insert contributes to a measurable uplift in productivity while supporting predictable tool-change planning. If additional machining scenarios require clarification, Metav Werkzeuge’s advisors can assist with toolholder pairing and cutting-parameter recommendations. For tailored application advice on Walter Tools’ TCMT090204-RK4 WKK20S or to discuss batch supply and toolholder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the technical team will advise on the optimal setup for cast iron turning. Technical data Article number / SKU: TCMT090204-RK4-WKK20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT090204-RK4 WKK20S Walter Tools Series: Tiger-tec Silver Core specifications Insert form: Triangle 60° Clearance angle: 7° Corner radius: 0.4 mm Size code: 09 Thickness code: 02 Chipbreaker: RK4 Grade: WKK20S Materials & special features Coating: Tiger·tec Silver (coated carbide) Suitable for: Cast iron (ISO K) Tolerance class: M Execution: T Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TCMT090204-RK4 WKK20S from Walter Tools is formulated for machining cast iron (ISO K), with the grade and chipbreaker tuned to handle the abrasive wear and short, breaking chips typical of these materials. How does the RK4 chipbreaker help in production? The RK4 chipbreaker is optimised for controlled chip formation and evacuation in cast-iron turning, reducing the risk of chip entanglement and promoting continuous operation with fewer interruptions. Can this insert deliver a good surface finish? Yes — the 0.4 mm corner radius and the 7° clearance angle help balance edge strength and finish quality, enabling consistent surface results in medium-duty finishing passes. Is the TCMT090204-RK4 compatible with standard toolholders? The insert’s triangular 60° form is compatible with common triangular toolholders for turning centres; for exact holder matching, the Walter Tools insert designation TCMT090204-RK4 WKK20S should be referenced. What is the advantage of the Tiger·tec Silver series for this application? The Tiger·tec Silver coating enhances abrasion resistance while preserving edge toughness, which is particularly beneficial when machining abrasive cast-iron grades, contributing to longer tool life and process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are cited for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer (Walter Tools).
TCMT090204-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant Tiger‑tec Silver grade, a stable RM4 chipbreaker and a compact triangle 60° geometry for dependable turning of stainless steel and high‑temperature alloys; order the insert through Metav Werkzeuge or consult their technical team for tailored cutting data. TCMT090204-RM4 WSM20S — Turning indexable insert (triangle 60°, 7° relief), Tiger‑tec Silver, Walter Tools The TCMT090204-RM4 WSM20S is a coated carbide triangular insert designed for finishing and semi‑finishing turning of stainless steel and heat‑resistant superalloys, combining a robust cutting grade with a reliable chip control geometry Tiger‑tec Silver for heat resistance and wear control RM4 chipbreaker for stable chip formation Triangle 60° for versatile turning applications 0.4 mm corner radius for enhanced edge strength Consistent performance on difficult materials The WSM20S grade, produced within the Tiger‑tec Silver range, is engineered for machining materials that tend to generate heat and sticky chips. By combining a coated carbide substrate with a tailored coating system, the insert supports stable chip formation and extended tool life under challenging conditions. This yields fewer interruptions in the machining cycle and more predictable tool‑change intervals, which benefits production planning and reduces unplanned downtime. Geometry and edge design for process reliability The triangle 60° form and a 7° relief angle deliver a balance between cutting strength and accessibility in tight radii or profile turns. The RM4 chipbreaker is optimised for controlled chip flow on stainless steel and superalloys, reducing the risk of built‑up edge and improving surface integrity. A 0.4 mm corner radius strengthens the cutting edge against mechanical and thermal shock, providing repeatable results in series production. Practical advantages in the machining sequence Using this insert in a stable toolholder arrangement leads to predictable metal removal and consistent surface finish in finishing and semi‑finishing operations. The combination of grade and chipbreaker helps to maintain edge stability across varying feed rates and depths of cut, which supports higher process security and consistent part quality. Where frequent tool changes are costly, the insert’s wear characteristics contribute to overall productivity gains. Compatibility and handling notes The indexable insert is supplied in the TCMT090204 format and fits holders designed for triangular 60° inserts with the corresponding seat. Material designation S / M indicates suitability for heat‑resistant superalloys and stainless steel; adjust cutting parameters to the specific workpiece and machine rigidity. For best results, pair the insert with a rigid clamping system and review coolant strategy to support chip evacuation and thermal control. Contact Metav Werkzeuge for cutting data, availability and to specify the Walter Tools TCMT090204-RM4 WSM20S insert for your application — e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical advice Technical Data SKU: TCMT090204-RM4-WSM20S-WALTER Designation: TCMT090204-RM4 WSM20S Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Facts Relief angle: 7° Corner radius: 0.4 mm Shape: Triangle 60° Size code: 09 Thickness code: 02 Tolerance class: M Material designation: S / M Special features RM4 chipbreaker Coated carbide cutting material Suited for stainless steel (M) Suited for heat‑resistant superalloys and titanium alloys (S) Optimised for finishing and semi‑finishing turning FAQ What materials is this insert designed for? The TCMT090204-RM4 WSM20S insert by Walter Tools is intended for stainless steel and heat‑resistant superalloys (material groups M and S), where its coating and chipbreaker support secure cutting. How does the RM4 chipbreaker influence machining? The RM4 chipbreaker promotes controlled chip formation for the TCMT090204-RM4 WSM20S, improving evacuation and surface integrity when turning challenging materials. What does the 0.4 mm corner radius mean in practice? A 0.4 mm corner radius on the insert increases edge robustness and distributes cutting forces, helping the Walter Tools insert withstand intermittent loads and extend usable life. Is this insert suitable for finishing and semi‑finishing? Yes, the combination of geometry, WSM20S grade and RM4 chipbreaker makes the insert appropriate for finishing and semi‑finishing turning operations on stainless steel and similar alloys. Which toolholders are compatible with this insert? The insert follows the TCMT090204 form factor; any toolholder designed for triangular 60° TCMT inserts with the matching seat and clamping system will be compatible. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer; the brand Walter Tools is used where appropriate for identification.
TCMT090204-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver grade, a RM4 chipbreaker and the triangle 60° geometry for secure chip control and longer tool life. These attributes support productive machining of stainless steels and heat-resistant superalloys while maintaining dimensional stability. Order the TCMT090204-RM4 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. TCMT090204-RM4 WSM30S indexable insert for drilling and turning, triangle 60°, RM4 – Walter Tools A TCMT090204-RM4 WSM30S indexable insert engineered for demanding machining of stainless steels and superalloys, combining a robust coated-carbide grade with a geometry optimised for stable cutting and repeatable results Tiger·tec Silver coating technology Suited for stainless steel and superalloys Triangle 60° insert geometry RM4 chipbreaker for controlled chips High-performance grade for demanding materials The WSM30S grade of the Tiger·tec Silver series is a coated carbide solution designed to tackle materials that create heat and work harden, such as stainless steel and heat-resistant superalloys. Its formulation focuses on thermal resistance and edge stability to reduce edge build-up and prolong interval between index changes. For production environments, this means improved process reliability and fewer interruptions to the machine cycle, translating into higher effective throughput without compromising dimensional accuracy. Geometry and chip control that stabilise the cut A triangle 60° insert form, with a 0.4 mm corner radius and a free angle of 7°, provides a balance between cutting strength and surface finish. The RM4 chipbreaker is tuned to break and evacuate chips efficiently under interrupted or continuous cutting conditions, reducing the risk of recutting and surface damage. These geometric choices work together to maintain a steady cutting force, which helps preserve spindle life and contributes to consistent component tolerances in serial production. Process benefits that reduce overall cost per part Using a coated, application-oriented grade together with the insert's geometry yields measurable process advantages: fewer indexing events, better surface integrity and lower scrap rates. The combination of Tiger·tec Silver wear resistance and a precise chipbreaker improves tool life, so tooling expenditure per finished part falls. In addition, the insert’s tolerance class M supports predictable performance in repeat production, which simplifies process planning and reduces downtime from unexpected tool wear. Recommended applications and material compatibility This insert is suitable for machining tasks classified under ISO groups M and S, meaning it is intended for stainless steels and heat-resistant superalloys (including some titanium applications depending on geometry and cut parameters). The grade and chip control are especially helpful when machining materials that dissipate heat poorly and impose high thermal loads on the cutting edge. For best results, select cutting parameters matched to the workpiece alloy and the machine’s rigidity; technical advice is available if more detailed parameterisation is required. For precise selection or to discuss suitability for specific components, contact Metav Werkzeuge for tailored recommendations and ordering assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TCMT090204-RM4-WSM30S-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT090204-RM4 WSM30S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Execution: T Designation: TCMT090204-RM4 WSM30S Measurements / Core data Free angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness code: 02 Insert shape: Triangle 60° Applications / Special features Chipbreaker: RM4 Material suitability: S / M (superalloys, stainless steel) Tolerance class: M Coated carbide grade (Tiger·tec Silver) Intended for drilling/boring and turning indexable applications FAQ What materials is this insert suited for? The TCMT090204-RM4 WSM30S insert is formulated for stainless steels (ISO group M) and heat-resistant superalloys (ISO group S), offering thermal resistance and edge stability for those alloys. How does the RM4 chipbreaker influence machining? The RM4 chipbreaker on this insert promotes predictable chip formation and evacuation, which reduces the risk of recutting and helps maintain surface quality during both continuous and interrupted cuts. Which geometry advantages does the triangle 60° form provide? A triangle 60° form gives three usable cutting edges per insert and a good compromise between strength and clearance; combined with a 0.4 mm corner radius and 7° free angle, it supports repeatable dimensional control and a stable cutting process. Can this insert be used for both drilling and turning operations? Yes, the TCMT090204-RM4 WSM30S is specified as a drilling/boring and turning indexable insert; the combination of grade and geometry makes it versatile for related machining tasks where the material and cutting conditions are appropriate. What is the key benefit of the Tiger·tec Silver series here? Tiger·tec Silver provides enhanced wear resistance and temperature management, which extends tool life and improves process reliability when machining tough-to-cut alloys with this insert. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TCMT090204-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger·tec Gold coating and the versatile RP4 chipbreaker for efficient, repeatable turning of Stahl; order via Metav Werkzeuge or request tailored process advice from our consultants. TCMT090204-RP4 WPP20G – Turning insert (Triangle 60°, RP4) by Walter Tools A coated carbide turning insert, TCMT090204-RP4 WPP20G, designed for conventional and high-productivity turning of Stahl with stable chip control and long tool life Tiger·tec Gold coated carbide grade WPP20G Optimised RP4 chipbreaker for Stahl machining Triangle 60° insert for versatile turning 0.4 mm corner radius for durable cutting edge Proven coating and material pairing for consistent productivity The Tiger·tec Gold coating combined with the WPP20G grade delivers a reliable balance between wear resistance and toughness, making it particularly suitable for machining Stahl where temperature and chip formation vary. The coated carbide construction reduces flank wear and extends edge life, which in practice leads to longer uninterrupted cutting intervals and fewer index changes. For production environments aiming for predictable tool consumption and reduced downtime, this grade supports efficient batch and single‑piece flows without demanding exotic cutting conditions. Chip control and geometry that simplify process parameters The RP4 chipbreaker is tuned to the geometry of the triangle insert and the specified 0.4 mm corner radius, promoting controlled chip breakage and evacuation during turning operations in Stahl. The 7° clearance contributes to a stable cutting edge contact and reduces rubbing, which helps maintain surface finish and dimensional repeatability. Explaining briefly: chipbreakers shape the chips to prevent entanglement and tool interference; in this case the RP4 form is optimised for medium‑to‑general turning applications, reducing the need for frequent parameter adjustments and enabling straightforward process set‑up. Practical benefits and applications in everyday machining The triangle 60° form and the compact insert size make this grade well suited to a wide range of turning tasks—from roughing passes where robustness is required to semi‑finishing operations where consistent surface quality matters. The combination of geometry and coating translates into fewer insert changes and improved throughput for workshops working predominantly with Stahl. The result is a reliable tool solution that supports both manual lathe operations and CNC turning centres, offering a clear operational advantage through predictable performance and a reduced administrative burden for tooling replenishment. For process consultation on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical Data Article number: TCMT090204-RP4-WPP20G-WALTER Product designation: TCMT090204-RP4 WPP20G Manufacturer: Walter Tools Facts Insert form: Triangle 60° Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: RP4 Insert size: 09 Thickness: 02 Tolerance class: M Grade/series: WPP20G / Tiger·tec Gold Special features Coating technology: Tiger·tec Gold Material group: P (Stahl) Execution: T Application: Turning / boring indexable insert Suitable for general and productive turning tasks Brand: Walter Tools FAQ What materials is this insert intended for? The TCMT090204‑RP4 WPP20G insert is developed primarily for machining Stahl (material group P), offering a combination of wear resistance and toughness appropriate for unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this insert promotes controlled chip formation and evacuation during turning, which improves process stability and reduces the risk of chip-related interference in both manual and CNC operations. What production advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances thermal and abrasive resistance of the carbide substrate, resulting in longer tool life, fewer index changes and more consistent surface finishes when machining Stahl. Is the insert suitable for finishing passes? Yes, with its 0.4 mm corner radius and 7° clearance, the insert supports semi‑finishing and finishing operations that demand repeatable dimensional results and a good surface appearance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com